typo fix (Reinout Van Schouwen)

6 files changed, 15 insertions, 15 deletions

diff --git a/dhcp_wizard/Dhcp.pm b/dhcp_wizard/Dhcp.pm
index 43857a6e..122a389c 100755
--- a/dhcp_wizard/Dhcp.pm
+++ b/dhcp_wizard/Dhcp.pm
@@ -61,7 +61,7 @@ $o->{pages} = {
 	          next => 'ip_range'
 	      },
 	      ip_range => {
-	          name => N("Range of addresses used by dhcp") . "\n\n\n" . N("Select the range of addresses assigned to the workstations by the DHCP service; unless you have special needs, you can safely accept the proposed values. (ie: 192.168.100.20 192.168.100.40)") . "\n\n" . N("If You want to enable PXE in your dhcp server please check the box (Pre-boot eXecution Environment, a protocol that allow computers to boot through the network)."),
+	          name => N("Range of addresses used by DHCP") . "\n\n\n" . N("Select the range of addresses assigned to the workstations by the DHCP service; unless you have special needs, you can safely accept the proposed values. (ie: 192.168.100.20 192.168.100.40)") . "\n\n" . N("If you want to enable PXE in your dhcp server please check the box (Pre-boot eXecution Environment, a protocol that allows computers to boot through the network)."),
 		   pre => sub {
 			$o->{var}{ip1} ||= compute_range();
 			$o->{var}{ip2} ||= compute_range2();
diff --git a/installsrv_wizard/Installsrv.pm b/installsrv_wizard/Installsrv.pm
index 51612dd7..a3843592 100644
--- a/installsrv_wizard/Installsrv.pm
+++ b/installsrv_wizard/Installsrv.pm
@@ -72,7 +72,7 @@ $o->{pages} = {
 				  next => 'install_srv',
 				 },
 	       error_dir => {
-			     name => N("Error, the source directory must be a directory with full Mandrake installation directory."),
+			     name => N("Error, the source path must be a directory with full Mandrake installation directory."),
 			     next => 'install_srv',
 			    },
 	       dir_already_use => {
@@ -95,7 +95,7 @@ $o->{pages} = {
                                next => 'end',
 			      },
 	       end => {
-		       name => N("Congratulations, Mandrake Install server is now ready. You can now configure a DHCP server with PXE suport, and a PXE server. So it will be very easy to install Mandrake through network."),
+		       name => N("Congratulations, Mandrake Install server is now ready. You can now configure a DHCP server with PXE support, and a PXE server. So it will be very easy to install Mandrake through a network."),
 		       end => 1,
 		       no_back => 1,
 		       next => 0
diff --git a/kolab_wizard/Kolab.pm b/kolab_wizard/Kolab.pm
index 88c6af17..422905a4 100755
--- a/kolab_wizard/Kolab.pm
+++ b/kolab_wizard/Kolab.pm
@@ -96,7 +96,7 @@ $o->{pages} = {
 			   next => 'end'
 			  },
 	       end => {
-		       name => N("Congratulations") . "\n\n" . N("The kolab server is now configured and running. Log in as 'manager' with the password you entered."),
+		       name => N("Congratulations") . "\n\n" . N("The kolab server is now configure and running. Log in as 'manager' with the password you entered."),
 		       end => 1,
 		       next => 0
 	  },
diff --git a/ldap_wizard/ldap.pm b/ldap_wizard/ldap.pm
index 6e823605..4f11dd8d 100644
--- a/ldap_wizard/ldap.pm
+++ b/ldap_wizard/ldap.pm
@@ -176,8 +176,8 @@ RootDN is the manager of your ldap server."),
 		       next => 0
 		      },
 	       endadd => {
-			  name => N("Successfully add data"),
-			  data => [ { label => N("The wizard successfully add entry in ldap") } ],
+			  name => N("Successfully added data"),
+			  data => [ { label => N("The wizard successfully added an entry in ldap") } ],
 			  no_back => 1,
 			  end => 1,
 			  next => 0,
diff --git a/nisautofs_wizard/Nisautofs.pm b/nisautofs_wizard/Nisautofs.pm
index f237853e..de312857 100644
--- a/nisautofs_wizard/Nisautofs.pm
+++ b/nisautofs_wizard/Nisautofs.pm
@@ -95,7 +95,7 @@ $o->{pages} = {
 				  next => 'summaryclient',
 			     },
 	       nis_server => {
-			      name => N("NIS server with autofs map") . "\n\n" . N("A NIS server is useful to create user, hostname database. The wizard also build autofs map, so it provides the capabilities for NIS user to automount their home directory on a NIS client computer.") . "\n\n" . N("NIS server: name of your computer.")  . "\n" . N("Home NIS: home base directory for users on NIS server. This directory will be export through NFS server.") . "\n" . N("NIS domain: NIS domain to use (generally same as your DNS domainaname)."),
+			      name => N("NIS server with autofs map") . "\n\n" . N("A NIS server is useful to create user, hostname database. The wizard also build autofs map, so it provides the capabilities for NIS user to automount their home directory on a NIS client computer.") . "\n\n" . N("NIS server: name of your computer.")  . "\n" . N("Home NIS: home base directory for users on NIS server. This directory will be exported through NFS server.") . "\n" . N("NIS domain: NIS domain to use (generally same as your DNS domainaname)."),
 			      data => [
 				       { label => N("NIS server:"), val => $HOST },
 				       { label => N("Home NIS:"), val => \$o->{var}{HOMENIS} },
@@ -129,11 +129,11 @@ $o->{pages} = {
 				 next => 'endclient',
 				},
 	       error_homedir => {
-				 name => N("Error should be a directory."),
+				 name => N("Error: should be a directory."),
 				 next => 'nis_server',
 				},
 	       error_nisd => {
-			      name => N("Error nisdomainame should not be 'none' or 'localdomain'") . "\n\n" . N("Please adjust it."),
+			      name => N("Error: nisdomainame should not be 'none' or 'localdomain'.") . "\n\n" . N("Please adjust it."),
 			      end => 1,
 			      next => 0,
 			     },
diff --git a/pxe_wizard/Pxe.pm b/pxe_wizard/Pxe.pm
index 243118ed..90d17dea 100644
--- a/pxe_wizard/Pxe.pm
+++ b/pxe_wizard/Pxe.pm
@@ -153,14 +153,14 @@ $o->{pages} = {
 			     next => 'summaryaddrdz',
 			    },
 	       removeimg => {
-			     name => N("Remove a boot image") . "\n\n" . N("Please choose the PXE boot image you want to remove from PXE server.") . "\n\n" . N("The PXE boot image, and the related entry in PXE menu will be deleted."),
+			     name => N("Remove a boot image") . "\n\n" . N("Please choose the PXE boot image you want to remove from the PXE server.") . "\n\n" . N("The PXE boot image, and the related entry in PXE menu will be deleted."),
 			     data => [
 				      { label => N("Boot image to remove:"), val => \$o->{var}{IMGTOREMOVE}, fixed_list => \@list_menu },
 				     ],
 			     next => 'summaryremove',
 			    },
 	       modifyimg => {
-			     name => N("Add options to boot image") . "\n\n" . N("In some case, you want to add some option to PXE boot image. This wizard provides an easy way to custom boot image with common parameters.") . "\n\n" . N("Please choose, from the list below, the PXE boot image you want to modify"),
+			     name => N("Add options to boot image") . "\n\n" . N("In some cases, you want to add some options to the PXE boot image. This wizard provides an easy way to customize a boot image with common parameters.") . "\n\n" . N("Please choose, from the list below, the PXE boot image you want to modify"),
 			     data => [
 				      { label => N("Boot image to modify:"), val => \$o->{var}{IMGTOMODIFY}, fixed_list => \@list_menu },
 				     ],
@@ -168,7 +168,7 @@ $o->{pages} = {
 			     next => 'gomodify',
 			    },
 	       gomodify => {
-			    name => N("Add option to PXE boot disk") . "\n\n" . N("Server IP: IP address of server, which contain installation directory. You can create one with MDK install server wizard.") . "\n" . N("Install directory: the full path to MDK install server directory") . "\n" . N("Installation method: choose NFS or HTTP."),
+			    name => N("Add option to the PXE boot disk") . "\n\n" . N("Server IP: IP address of the server, which contains installation directory. You can create one with MDK install server wizard.") . "\n" . N("Install directory: the full path to MDK install server directory") . "\n" . N("Installation method: choose NFS or HTTP."),
 			    data => [
 				     { label => N("Boot image to modify:"), fixed_val => \$o->{var}{i} },
 				     { label => N("Server IP:"), val => \$o->{var}{IP} },
@@ -190,11 +190,11 @@ $o->{pages} = {
 			     next => 'summarymodify',
 			   },
 	       pxeserver => {
-			     name => N("Set PXE server") . "\n\n" . N("We need to use a special dhcpd.conf file with PXE parameter. To set up such a DHCP server, launch the DHCP wizard and check the box 'Enable PXE'. If you don't do that, PXE query will not be answered by this server.") . "\n" . N("Now the wizard will configure all needed default configurations files to allow computers to boot through the network."),
+			     name => N("Set PXE server") . "\n\n" . N("We need to use a special dhcpd.conf file with PXE parameter. To set up such a DHCP server, launch the DHCP wizard and check the box 'Enable PXE'. If you don't do that, PXE query will not be answered by this server.") . "\n" . N("Now the wizard will configure all needed default configuration files to allow computers to boot through the network."),
 			     next => 'summaryserver',
 			    },
 	       error_img => {
-			     name => N("Please provide a bootable image. To boot through network, network computer need a boot image."),
+			     name => N("Please provide a bootable image. To boot through a network, network computers need a boot image."),
 			     next => 'addimg',
 			    },
 	       needimg => {
@@ -206,7 +206,7 @@ $o->{pages} = {
 			   },
 			  },
 	       error_imgrdz => {
-			     name => N("Please provide an all.rdz image, wich contain all drivers. You can find one in first CD of Mandrakesoft product, in /isolinux/alt0/ directory."),
+			     name => N("Please provide an all.rdz image, wich contains all drivers. You can find one on the first CD of Mandrakelinux distribution, in /isolinux/alt0/ directory."),
 			     next => 'addimgrdz',
 			    },
 	       error_path_img => {