# Drakwizard wizard's Portable Object file for Simplified Chinese locale
# Copyright (C) 2002 Free Software Foundation, Inc.
# wiz2po <adesmons@mandriva.com> 2002.
#
# Danny Zeng <danny@zeng.com.cn>, 2002
# Shiyu Tang <shiyutang@netscape.net>, 2003, 2004
# Funda Wang <fundawang@linux.net.cn>, 2003, 2004, 2005
#
msgid ""
msgstr ""
"Project-Id-Version: drakpxelinux 2006\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2005-07-18 15:17+0200\n"
"PO-Revision-Date: 2005-07-29 20:19+0800\n"
"Last-Translator: Funda Wang <fundawang@linux.net.cn>\n"
"Language-Team: Mandriva Linux i18n Team <cooker-i18n@mandrivalinux.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../drakpxelinux.pl:67
#, c-format
msgid ""
"PXE Label: the name to be displayed in the PXE menu (an ASCII word/number)"
msgstr "PXE 标签：PXE 菜单中所显示的名称(一个 ASCII 单词或数字)"

#: ../drakpxelinux.pl:68
#, c-format
msgid "Server: IP address of server, that contains the installation directory"
msgstr "服务器：服务器的 IP 地址，其中包含了安装目录"

#: ../drakpxelinux.pl:69
#, c-format
msgid "Kernel: memdisk or vmlinuz"
msgstr "内核：memdisk 或 vmlinuz"

#: ../drakpxelinux.pl:70
#, c-format
msgid "Initrd: network boot image (network.img) or all.rdz"
msgstr "Initrd: 网络启动映像(network.img)或 all.rdz"

#: ../drakpxelinux.pl:71
#, c-format
msgid "Interface: network interface used for the installation process"
msgstr "网卡：用于安装过程的网卡安装"

#: ../drakpxelinux.pl:72
#, c-format
msgid "Network: DHCP or an IP address"
msgstr "网络：DHCP 或 IP 地址"

#: ../drakpxelinux.pl:73
#, c-format
msgid "Directory: full path to Mandriva Linux install server directory"
msgstr "目录：Mandriva Linux 安装服务器目录路径"

#: ../drakpxelinux.pl:74
#, c-format
msgid "Installation method: NFS or HTTP"
msgstr "安装方式：选择 NFS 或 HTTP"

#: ../drakpxelinux.pl:75
#, c-format
msgid "Ramsize: ramsize parameter on boot image"
msgstr "内存大小：在启动盘上调整内存大小"

#: ../drakpxelinux.pl:76
#, c-format
msgid "Display: export display to another computer (e.g.: 10.0.1.33:0)"
msgstr "显示：将显示导出至另外的计算机(如：10.0.1.33:0)"

#: ../drakpxelinux.pl:77
#, c-format
msgid "VGA: if you encounter any problem with VGA, please adjust"
msgstr "VGA：如果您遇到了一些 VGA 上的问题，请调整。"

#: ../drakpxelinux.pl:82
#, c-format
msgid "network boot image (network.img) or all.rdz"
msgstr "网络启动映像(network.img)或 all.rdz"

#: ../drakpxelinux.pl:83
#, c-format
msgid "memdisk in case of network.img, or vmlinuz"
msgstr "如果是 network.img，则是 memdisk，否则就是 vmlinuz"

#: ../drakpxelinux.pl:84
#, c-format
msgid "if you encounter any problem with VGA, please adjust"
msgstr "如果您遇到了一些 VGA 上的问题，请调整"

#: ../drakpxelinux.pl:85
#, c-format
msgid "network interface used for the installation process"
msgstr "安装过程所使用的网卡"

#: ../drakpxelinux.pl:86
#, c-format
msgid "Information displayed in PXE help (F1 key)"
msgstr "PXE 帮助(F1 键)中显示的信息"

#: ../drakpxelinux.pl:87
#, c-format
msgid "DHCP or an IP address"
msgstr "DHCP 或 IP 地址"

#: ../drakpxelinux.pl:88
#, c-format
msgid "full path to Mandriva Linux install server directory"
msgstr "Mandriva Linux 安装服务器目录的完整路径"

#: ../drakpxelinux.pl:89
#, c-format
msgid "installation method: choose NFS or HTTP"
msgstr "安装方式: 选择 NFS 或 HTTP。"

#: ../drakpxelinux.pl:90
#, c-format
msgid "ramsize parameter on boot image"
msgstr "启动盘上的 ramsize 参数"

#: ../drakpxelinux.pl:91
#, c-format
msgid "export display on another computer (e.g.: 10.0.1.33:0)"
msgstr "将显示导出至另外一台计算机(即：10.0.1.33:0)"

#: ../drakpxelinux.pl:93
#, c-format
msgid "IP address of server, that contains the installation directory"
msgstr "包含安装目录的服务器的 IP 地址。"

#: ../drakpxelinux.pl:94
#, c-format
msgid "lists all PXE entries, the default boot is the selected one"
msgstr "列出全部 PXE 项，默认启动为所选项"

#: ../drakpxelinux.pl:95
#, c-format
msgid "launches a wizard to setup a PXE server"
msgstr "调用向导设置 PXE 服务器"

#: ../drakpxelinux.pl:96
#, c-format
msgid "edits the PXE entry selected with a dialog box"
msgstr "用对话框编辑选中的 PXE 项"

#: ../drakpxelinux.pl:97
#, c-format
msgid "removes the selected PXE entry"
msgstr "删除选中的 PXE 项"

#: ../drakpxelinux.pl:98
#, c-format
msgid "apply change to configuration file"
msgstr "将更改应用到配置文件"

#: ../drakpxelinux.pl:99
#, c-format
msgid "launches a wizard to add a PXE entry "
msgstr "调用向导添加 PXE 项"

#: ../drakpxelinux.pl:100
#, c-format
msgid "get help from online documentation"
msgstr "从在线文档获得帮助"

#: ../drakpxelinux.pl:117 ../drakpxelinux.pl:747
#, c-format
msgid "PXE server"
msgstr "PXE 服务器"

#: ../drakpxelinux.pl:117
#, c-format
msgid "Restarting PXE server..."
msgstr "正在重新启动 PXE 服务器..."

#: ../drakpxelinux.pl:118 ../drakpxelinux.pl:131 ../drakpxelinux.pl:241
#: ../drakpxelinux.pl:244 ../drakpxelinux.pl:247 ../drakpxelinux.pl:323
#: ../drakpxelinux.pl:362 ../drakpxelinux.pl:364 ../drakpxelinux.pl:367
#: ../drakpxelinux.pl:371 ../drakpxelinux.pl:530 ../drakpxelinux.pl:649
#, c-format
msgid "Error!"
msgstr "错误！"

#: ../drakpxelinux.pl:118
#, c-format
msgid "Error Restarting PXE server"
msgstr "重新启动 PXE 服务器出错"

#: ../drakpxelinux.pl:131
#, c-format
msgid ""
"missing %s\n"
"\n"
"Please install the pxe package."
msgstr ""
"缺少 %s\n"
"\n"
"请安装 pxe 软件包。"

#: ../drakpxelinux.pl:220 ../drakpxelinux.pl:879
#, c-format
msgid "Add a PXE entry"
msgstr "添加 PXE 项"

#: ../drakpxelinux.pl:223
#, c-format
msgid "Add an all.rdz boot image"
msgstr "添加 all.rdz 启动映像"

#: ../drakpxelinux.pl:223
#, c-format
msgid ""
"To boot through the network, the networked computer needs a boot image. "
"Morever we need to name this image, so each boot image is related to a name "
"in the PXE menu. Thus, the user can choose which image he wants to boot "
"through PXE."
msgstr ""
"要通过网络启动，网络计算机需要有引导映像。除此以外，我们还需要为此映像命名，"
"这样每个引导映像在 PXE 菜单中就有一个对应的名字了。用户可以通过 PXE 选择想要"
"启动哪个映像。"

#: ../drakpxelinux.pl:223
#, c-format
msgid ""
"For technical reasons, in case of multiple boot images, it's simpler to boot "
"the networked computer through a kernel (vmlinuz), and to provide one file "
"with all needed drivers (in our case all.rdz)."
msgstr ""
"从技术方面考虑，如果有多个引导映像的话，通过内核(vmlinuz)并提供包含所需全部驱"
"动程序的文件(all.rdz)来启动网络计算机更加容易。"

#: ../drakpxelinux.pl:227
#, c-format
msgid ""
"When this wizard has finished, the all.rdz image and kernel vmlinuz will be "
"copied into \n"
"%s.\n"
"\n"
"The PXE menu list will be updated with this new entry."
msgstr ""
"当此向导完成后，all.rdz 映像以及内核 vmlinuz 将被复制到\n"
"%s。\n"
"\n"
"PXE 菜单列表将会用此新项更新。"

#: ../drakpxelinux.pl:229
#, c-format
msgid "PXE label:"
msgstr "PXE 标签:"

#: ../drakpxelinux.pl:230
#, c-format
msgid ""
"name displayed in PXE menu (please provide an ASCII word or a number, "
"without spaces)"
msgstr "PXE 菜单中所显示的名称(一个单词或数字，无空格)"

#: ../drakpxelinux.pl:231
#, c-format
msgid "PXE information:"
msgstr "PXE 信息:"

#: ../drakpxelinux.pl:232
#, c-format
msgid ""
"The PXE information is used to explain the role of the boot image,\n"
"e.g.:\n"
"Mandriva Linux 10 rescue disk\n"
"Mandriva Linux cooker install via http"
msgstr ""
"用于描述启动映像角色的 PXE 信息，即:\n"
"Mandriva Linux 10 抢救磁盘\n"
"通过 http 的 Mandriva Linux cooker 安装"

#: ../drakpxelinux.pl:233
#, c-format
msgid "Full path to all.rdz image source:"
msgstr "all.rdz 映像源的完整路径:"

#: ../drakpxelinux.pl:234
#, c-format
msgid "Provide the full path to all.rdz image location"
msgstr "提供 all.rdz 映像位置的完整路径"

#: ../drakpxelinux.pl:235
#, c-format
msgid "Full path to vmlinuz source:"
msgstr "vmlinuz 源的完整路径:"

#: ../drakpxelinux.pl:236
#, c-format
msgid "Provide the full path to vmlinuz kernel location"
msgstr "提供 vmlinuz 内核源的完整路径"

#: ../drakpxelinux.pl:241
#, c-format
msgid "PXE label should be an ASCII word/number without space. Please adjust"
msgstr "PXE 标签应该是不带空格的 ASCII 单词/数字。请调整"

#: ../drakpxelinux.pl:244
#, c-format
msgid "Please enter a correct path to all.rdz"
msgstr "请输入 all.rdz 的正确路径"

#: ../drakpxelinux.pl:247
#, c-format
msgid "Please enter a correct path to vmlinuz"
msgstr "请输入 vmlinuz 的正确路径"

#: ../drakpxelinux.pl:252
#, c-format
msgid "add a PXE entry"
msgstr "添加 PXE 项"

#: ../drakpxelinux.pl:252
#, c-format
msgid "add a PXE entry in your PXE server configuration..."
msgstr "在您的 PXE 服务器配置中添加新的 PXE 项..."

#: ../drakpxelinux.pl:275
#, c-format
msgid "Congratulations"
msgstr "恭喜"

#: ../drakpxelinux.pl:276
#, c-format
msgid "The wizard successfully added the PXE boot image."
msgstr "向导成功地添加了 PXE 引导映像。"

#: ../drakpxelinux.pl:300 ../drakpxelinux.pl:344
#, c-format
msgid "Local"
msgstr "本地"

#: ../drakpxelinux.pl:300
#, c-format
msgid "You can't remove local entry."
msgstr "您无法删除本地项。"

#: ../drakpxelinux.pl:323
#, c-format
msgid ""
"Found a similar entry in PXE list labeled: %s.\n"
"Choose another label please"
msgstr ""
"在 PXE 列表中标签为 %s 中找到类似项。\n"
"请选择另外一个标签"

#: ../drakpxelinux.pl:344
#, c-format
msgid "You can't modify local entry."
msgstr "您无法修改本地项。"

#: ../drakpxelinux.pl:356
#, c-format
msgid "Selection"
msgstr "选择"

#: ../drakpxelinux.pl:362
#, c-format
msgid "Should be a directory."
msgstr "应该是一个目录。"

#: ../drakpxelinux.pl:364
#, c-format
msgid "Should be a file"
msgstr "应该是一个文件"

#: ../drakpxelinux.pl:367
#, c-format
msgid "Should be a boot sector file"
msgstr "应该是启动扇区文件"

#: ../drakpxelinux.pl:371
#, c-format
msgid "Should be an initrd file"
msgstr "应该是 initrd 文件"

#: ../drakpxelinux.pl:392
#, c-format
msgid "Select kernel to boot"
msgstr "选择要启动的内核"

#: ../drakpxelinux.pl:400
#, c-format
msgid "Select associated initrd"
msgstr "选择关联的 initrd"

#: ../drakpxelinux.pl:428
#, c-format
msgid "Select directory"
msgstr "选择目录"

#: ../drakpxelinux.pl:463 ../drakpxelinux.pl:793
#, c-format
msgid "DHCP or IP address"
msgstr "DHCP 或 IP 地址"

#: ../drakpxelinux.pl:483
#, c-format
msgid "PXE entry"
msgstr "PXE 项"

#: ../drakpxelinux.pl:485 ../drakpxelinux.pl:793
#, c-format
msgid "Label"
msgstr "标签"

#: ../drakpxelinux.pl:486 ../drakpxelinux.pl:793
#, c-format
msgid "Entry description"
msgstr "项描述"

#: ../drakpxelinux.pl:488
#, c-format
msgid "Kernel image: "
msgstr "内核映像: "

#: ../drakpxelinux.pl:489
#, c-format
msgid "Initrd image: "
msgstr "Initrd 映像: "

#: ../drakpxelinux.pl:493
#, c-format
msgid "Mandriva Linux installer options"
msgstr "Mandriva Linux 安装程序选项"

#: ../drakpxelinux.pl:495 ../drakpxelinux.pl:793
#, c-format
msgid "Ramdisk size"
msgstr "内存盘大小"

#: ../drakpxelinux.pl:496 ../drakpxelinux.pl:793
#, c-format
msgid "Custom options"
msgstr "自定义选项"

#: ../drakpxelinux.pl:497 ../drakpxelinux.pl:793
#, c-format
msgid "Frame buffer resolution"
msgstr "帧缓存分辨率"

#: ../drakpxelinux.pl:498 ../drakpxelinux.pl:793
#, c-format
msgid "Remote IP of X server"
msgstr "X 服务器的远程 IP"

#: ../drakpxelinux.pl:499
#, c-format
msgid "Automatic Options"
msgstr "自动选项"

#: ../drakpxelinux.pl:501 ../drakpxelinux.pl:793
#, c-format
msgid "Installation method"
msgstr "安装方式"

#: ../drakpxelinux.pl:502 ../drakpxelinux.pl:793
#, c-format
msgid "Network interface"
msgstr "网卡"

#: ../drakpxelinux.pl:508 ../drakpxelinux.pl:793
#, c-format
msgid "Remote server name"
msgstr "远程服务器名称"

#: ../drakpxelinux.pl:509 ../drakpxelinux.pl:793
#, c-format
msgid "Remote installation directory"
msgstr "远程安装目录"

#: ../drakpxelinux.pl:530
#, c-format
msgid "Please enter a valid IP address."
msgstr "请输入有效的 IP 地址。"

#: ../drakpxelinux.pl:638
#, c-format
msgid "online PXE documentation"
msgstr "在线 PXE 文档"

#: ../drakpxelinux.pl:649
#, c-format
msgid ""
"Your %s doesn't match your actual IP address configuration. Relaunching the "
"PXE server wizard to readjust it."
msgstr "您的 %s 与您的实际 IP 地址配置不符。请重新调用 PXE 向导进行调整。"

#: ../drakpxelinux.pl:663
#, c-format
msgid "PXE Wizard"
msgstr "PXE 向导"

#: ../drakpxelinux.pl:667
#, c-format
msgid "PXE wizard"
msgstr "PXE 向导"

#: ../drakpxelinux.pl:667
#, c-format
msgid "Set a PXE server."
msgstr "设置 PXE 服务器。"

#: ../drakpxelinux.pl:667
#, c-format
msgid ""
"This wizard will help you to configure the PXE server, and PXE boot image "
"management. PXE (Pre-boot eXecution Environment) is a protocol designed by "
"Intel that allows computers to boot through the network. PXE is stored in "
"the ROM of new generation network cards. When the computer boots up, the "
"BIOS loads the PXE ROM in the memory and executes it. A menu is displayed, "
"allowing the computer to boot an operating system loaded through the network."
msgstr ""
"本向导将帮助您配置 PXE 服务器和 PXE 引导映像管理。PXE(Pre-boot Execution "
"Environment，预启动执行环境)是一个由 Intel 设计的协议，它使得计算机能通过网络"
"启动。对于新一代网卡，PXE 保存在其 ROM 中。当计算机启动时，BIOS 装载 PXE ROM "
"到内存中，并且执行。一个菜单将会显示出来，允许计算机从网络中启动操作系统。"

#: ../drakpxelinux.pl:672
#, c-format
msgid "Set PXE server"
msgstr "设置 PXE 服务器"

#: ../drakpxelinux.pl:672
#, c-format
msgid ""
"We need to use a special dhcpd.conf file with PXE parameter. To set up such "
"a DHCP server, launch the DHCP wizard and check the box 'Enable PXE'. If you "
"don't do that, PXE query will not be answered by this server."
msgstr ""
"我们需要使用带 PXE 参数的特殊 dhcpd.conf。要设置这样的 DHCP 服务器，请调用 "
"DHCP 配置向导，选中复选框“启用 PXE”。如果您不这样做的话，此服务器将无法响应 "
"PXE 查询。"

#: ../drakpxelinux.pl:672
#, c-format
msgid ""
"Now the wizard will configure all needed default configuration files to "
"allow computers to boot through the network."
msgstr "向导现在将配置允许计算机从网络启动所需的全部默认配置文件。"

#: ../drakpxelinux.pl:677
#, c-format
msgid "PXE server Interface"
msgstr "PXE 服务器界面"

#: ../drakpxelinux.pl:685
#, c-format
msgid "The wizard will now prepare all default files to set up your PXE server"
msgstr "向导现在将要准备所有的默认文件，以设置您的 PXE 服务器"

#: ../drakpxelinux.pl:690
#, c-format
msgid "TFTP directory:        %s"
msgstr "TFTP 目录:       %s"

#: ../drakpxelinux.pl:691
#, c-format
msgid "Boot image path:       %s"
msgstr "启动映像路径:       %s"

#: ../drakpxelinux.pl:692
#, c-format
msgid "PXE config file:       %s"
msgstr "PXE 配置文件:       %s"

#: ../drakpxelinux.pl:693
#, c-format
msgid "PXE help file:       %s"
msgstr "PXE 帮助文件:       %s"

#: ../drakpxelinux.pl:700
#, c-format
msgid "End of PXE server configuration"
msgstr "PXE 服务器配置结束"

#: ../drakpxelinux.pl:701
#, c-format
msgid ""
"The wizard successfully configured your PXE server. Now you can configure "
"the PXE menu entry."
msgstr "向导成功地配置了您的 PXE 服务器。您现在可以配置 PXE 菜单项了。"

#: ../drakpxelinux.pl:747
#, c-format
msgid "Configuring a PXE server on your system..."
msgstr "正在您的系统中配置 PXE 服务器..."

#: ../drakpxelinux.pl:793
#, c-format
msgid "Kernel image"
msgstr "内核映像"

#: ../drakpxelinux.pl:793
#, c-format
msgid "Initrd image"
msgstr "Initrd 映像"

#: ../drakpxelinux.pl:803
#, c-format
msgid "Please configure a PXE server"
msgstr "请配置 PXE 服务器"

#: ../drakpxelinux.pl:803
#, c-format
msgid ""
"It seems this is the first time you run this tool.\n"
"A wizard will appear to configure your PXE server."
msgstr ""
"似乎这是您第一次运行此工具。\n"
"现在即将出现一个向导帮助您配置 PXE 服务器。"

#: ../drakpxelinux.pl:814 ../drakpxelinux.pl:885 ../drakpxelinux.pl:909
#, c-format
msgid "Error"
msgstr "出错"

#: ../drakpxelinux.pl:814 ../drakpxelinux.pl:909
#, c-format
msgid "The PXE server wizard has unexpectedly failed:"
msgstr "PXE 服务器向导意外失败:"

#: ../drakpxelinux.pl:874
#, c-format
msgid "Drakpxelinux manage your PXE server"
msgstr "Drakpxelinux 可管理您的 PXE 服务器"

#: ../drakpxelinux.pl:885
#, c-format
msgid "The PXE entry wizard has unexpectedly failed:"
msgstr "添加 PXE 项向导意外失败:"

#: ../drakpxelinux.pl:889
#, c-format
msgid "Remove PXE entry"
msgstr "删除 PXE 项"

#: ../drakpxelinux.pl:892
#, c-format
msgid "Edit PXE entry"
msgstr "编辑 PXE 项"

#: ../drakpxelinux.pl:895
#, c-format
msgid "Apply"
msgstr "应用"

#: ../drakpxelinux.pl:899
#, c-format
msgid "Default boot:"
msgstr "默认启动:"

#: ../drakpxelinux.pl:903
#, c-format
msgid "Reconfigure PXE Server"
msgstr "重新配置 PXE 服务器"

#: ../drakpxelinux.pl:913
#, c-format
msgid "Help"
msgstr "帮助"