1 files changed, 460 insertions, 0 deletions
diff --git a/krozat/doc/Makefile b/krozat/doc/Makefile
new file mode 100644
index 0000000..81e8c1a
--- /dev/null
+++ b/krozat/doc/Makefile
@@ -0,0 +1,460 @@
+# Generated automatically from Makefile.in by config.pl.
+# KDE tags expanded automatically by am_edit - $Revision$ 
+# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+####### kdevelop will overwrite this part!!! (begin)##########
+
+
+SHELL = /bin/sh
+
+srcdir = .
+top_srcdir = ..
+VPATH = .
+prefix = /usr
+exec_prefix = ${prefix}
+#>- 
+bindir = ${exec_prefix}/bin
+#>+ 3
+DEPDIR = .deps
+
+bindir = ${exec_prefix}/bin
+sbindir = ${exec_prefix}/sbin
+libexecdir = ${exec_prefix}/libexec
+datadir = ${prefix}/share
+sysconfdir = ${prefix}/etc
+sharedstatedir = ${prefix}/com
+localstatedir = ${prefix}/var
+libdir = ${exec_prefix}/lib
+infodir = ${prefix}/info
+mandir = ${prefix}/man
+includedir = ${prefix}/include
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/krozat
+pkglibdir = $(libdir)/krozat
+pkgincludedir = $(includedir)/krozat
+
+top_builddir = ..
+
+ACLOCAL = aclocal
+AUTOCONF = autoconf
+AUTOMAKE = automake
+AUTOHEADER = autoheader
+
+INSTALL = /usr//bin/install -c -p
+INSTALL_PROGRAM = ${INSTALL} $(INSTALL_STRIP_FLAG) $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_SCRIPT = ${INSTALL}
+transform = s,x,x,
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = i686-pc-linux-gnu
+build_triplet = i686-pc-linux-gnu
+host_alias = i686-pc-linux-gnu
+host_triplet = i686-pc-linux-gnu
+target_alias = i686-pc-linux-gnu
+target_triplet = i686-pc-linux-gnu
+ARTSCCONFIG = /usr/bin/artsc-config
+AS = @AS@
+AUTODIRS = 
+CC = gcc
+CONF_FILES =  $(top_srcdir)/./admin/configure.in.min $(top_srcdir)/configure.in.in
+CPP = gcc -E
+CXX = c++
+CXXCPP = c++ -E
+DCOPIDL = /usr/bin/dcopidl
+DCOPIDL2CPP = /usr/bin/dcopidl2cpp
+DCOP_DEPENDENCIES = $(DCOPIDL)
+DLLTOOL = @DLLTOOL@
+DPMSINC = @DPMSINC@
+DPMSLIB = @DPMSLIB@
+EXEEXT = 
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+GLINC = @GLINC@
+GLLIB = @GLLIB@
+GMSGFMT = /usr//bin/msgfmt
+IDL = @IDL@
+IDL_DEPENDENCIES = @IDL_DEPENDENCIES@
+JAR = @JAR@
+JAVAC = @JAVAC@
+JAVAH = @JAVAH@
+JVMLIBS = @JVMLIBS@
+KDECONFIG = /usr/bin/kde-config
+KDE_CXXFLAGS = 
+KDE_EXTRA_RPATH = 
+KDE_INCLUDES = 
+KDE_LDFLAGS = -L/usr/lib
+KDE_PLUGIN = -avoid-version -module -no-undefined $(KDE_RPATH)
+KDE_RPATH = -R $(kde_libraries) -R $(x_libraries)
+KDE_USE_CLOSURE_FALSE = #
+KDE_USE_CLOSURE_TRUE = 
+KDE_USE_FINAL_FALSE = 
+KDE_USE_FINAL_TRUE = #
+KDE_XSL_STYLESHEET = /usr/share/apps/ksgmltools2/customization/kde-chunk.xsl
+LIBCOMPAT = 
+LIBCRYPT = -lcrypt
+LIBDL = -ldl
+LIBGEN = @LIBGEN@
+LIBJPEG = -ljpeg
+LIBMICO = @LIBMICO@
+LIBOBJS = @LIBOBJS@
+LIBPNG = -lpng -lz -lm
+LIBPTHREAD = @LIBPTHREAD@
+LIBPYTHON = @LIBPYTHON@
+LIBQIMGIO = @LIBQIMGIO@
+LIBRESOLV = -lresolv
+LIBSHADOW = @LIBSHADOW@
+LIBSM = -lSM -lICE
+LIBSOCKET =  -lresolv
+LIBTIFF = @LIBTIFF@
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIBUCB = 
+LIBUTIL = -lutil
+LIBXINERAMA = 
+LIBZ = -lz
+LIB_KAB = -lkab
+LIB_KDECORE = -lkdecore
+LIB_KDEUI = -lkdeui
+LIB_KFILE = -lkfile
+LIB_KFM = 
+LIB_KFORMULA = -lkformula
+LIB_KHTML = -lkhtml
+LIB_KIMGIO = @LIB_KIMGIO@
+LIB_KIO = -lkio
+LIB_KPARTS = -lkparts
+LIB_KSPELL = -lkspell
+LIB_KSYCOCA = -lksycoca
+LIB_KWRITE = -lkwrite
+LIB_QT = -lqt $(LIBPNG) $(LIBJPEG) -lXext $(LIB_X11) $(LIBSM)
+LIB_SMB = -lsmb
+LIB_X11 = -lX11 $(LIBSOCKET)
+LN_S = ln -s
+MAKEINFO = makeinfo
+MCOPIDL = /usr/bin/mcopidl
+MEINPROC = /usr/bin/meinproc
+MICO_INCLUDES = @MICO_INCLUDES@
+MICO_LDFLAGS = @MICO_LDFLAGS@
+MOC = /usr/lib/qt2/bin/moc
+MSGFMT = /usr//bin/msgfmt
+NOOPT_CXXFLAGS =  -fno-exceptions -fno-check-new
+NOREPO = -fno-repo
+OBJDUMP = @OBJDUMP@
+OBJEXT = o
+PACKAGE = krozat
+PAMLIBS = @PAMLIBS@
+PASSWDLIBS = @PASSWDLIBS@
+PYTHONINC = @PYTHONINC@
+PYTHONLIB = @PYTHONLIB@
+PYTHONMODDIR = @PYTHONMODDIR@
+QT_INCLUDES = -I/usr/lib/qt2/include
+QT_LDFLAGS = 
+RANLIB = ranlib
+REPO = -frepo
+SETUIDFLAGS = @SETUIDFLAGS@
+STRIP = strip
+TOPSUBDIRS =  doc krozat po
+UIC = /usr/lib/qt2/bin/uic
+USER_INCLUDES = 
+USER_LDFLAGS = 
+USE_EXCEPTIONS = -fexceptions
+USE_RTTI = 
+USE_THREADS = @USE_THREADS@
+VERSION = 0.1
+XGETTEXT = /usr//bin/xgettext
+XPMINC = @XPMINC@
+XPMLIB = @XPMLIB@
+X_EXTRA_LIBS =  -lresolv
+X_INCLUDES = -I/usr/X11R6/include
+X_LDFLAGS = -L/usr/X11R6/lib
+X_PRE_LIBS = 
+all_includes = -I/usr/lib/qt2/include -I/usr/X11R6/include 
+all_libraries = -L/usr/X11R6/lib -L/usr/lib 
+idldir = @idldir@
+jni_includes = @jni_includes@
+kde_appsdir = ${prefix}/share/applnk
+kde_bindir = ${exec_prefix}/bin
+kde_confdir = ${prefix}/share/config
+kde_datadir = ${prefix}/share/apps
+kde_htmldir = ${prefix}/share/doc/HTML
+kde_icondir = ${prefix}/share/icons
+kde_includes = /usr/include
+kde_libraries = /usr/lib
+kde_libs_htmldir = /usr/share/doc/HTML
+kde_libs_prefix = /usr
+kde_locale = ${prefix}/share/locale
+kde_mimedir = ${prefix}/share/mimelnk
+kde_moduledir = ${exec_prefix}/lib/kde2
+kde_servicesdir = ${prefix}/share/services
+kde_servicetypesdir = ${prefix}/share/servicetypes
+kde_sounddir = ${prefix}/share/sounds
+kde_templatesdir = ${prefix}/share/templates
+kde_wallpaperdir = ${prefix}/share/wallpapers
+micodir = @micodir@
+qt_includes = /usr/lib/qt2/include
+qt_libraries = 
+x_includes = /usr/X11R6/include
+x_libraries = /usr/X11R6/lib
+
+SUBDIRS = en 
+mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+#>- all: all-redirect
+#>+ 1
+all: docs-am  all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+#>- 	cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile
+#>+ 2
+	cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile
+	cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive  \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+	  rev="$$subdir $$rev"; \
+	  test "$$subdir" != "." || dot_seen=yes; \
+	done; \
+	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+   if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+   fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = doc
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    chmod 777 $(distdir)/$$subdir; \
+	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile
+all-redirect: all-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am:  clean-tags clean-generic mostlyclean-am
+
+#>- clean: clean-recursive
+#>+ 1
+clean: kde-rpo-clean  clean-recursive
+
+distclean-am:  distclean-tags distclean-generic clean-am
+	-rm -f libtool
+
+distclean: distclean-recursive
+
+maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
+		distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+
+.PHONY: install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+####### kdevelop will overwrite this part!!! (end)############
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
+
+#>+ 2
+docs-am:
+
+#>+ 5
+force-reedit:
+		cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile
+	cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in
+
+
+#>+ 2
+final:
+	$(MAKE) all-am
+#>+ 2
+no-final:
+	$(MAKE) all-am
+#>+ 3
+cvs-clean:
+	$(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean
+
+#>+ 3
+kde-rpo-clean:
+	-rm -f *.rpo