diff options
Diffstat (limited to 'krozat/doc/Makefile.in')
| -rw-r--r-- | krozat/doc/Makefile.in | 459 |
1 files changed, 0 insertions, 459 deletions
diff --git a/krozat/doc/Makefile.in b/krozat/doc/Makefile.in deleted file mode 100644 index c823b44..0000000 --- a/krozat/doc/Makefile.in +++ /dev/null @@ -1,459 +0,0 @@ -# KDE tags expanded automatically by am_edit - $Revision$ -# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am - -# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -####### kdevelop will overwrite this part!!! (begin)########## - - -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ -#>- -bindir = @bindir@ -#>+ 3 -DEPDIR = .deps - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include - -DESTDIR = - -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ - -top_builddir = .. - -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -transform = @program_transform_name@ - -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_alias = @build_alias@ -build_triplet = @build@ -host_alias = @host_alias@ -host_triplet = @host@ -target_alias = @target_alias@ -target_triplet = @target@ -ARTSCCONFIG = @ARTSCCONFIG@ -AS = @AS@ -AUTODIRS = @AUTODIRS@ -CC = @CC@ -CONF_FILES = @CONF_FILES@ -CPP = @CPP@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -DCOPIDL = @DCOPIDL@ -DCOPIDL2CPP = @DCOPIDL2CPP@ -DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ -DLLTOOL = @DLLTOOL@ -DPMSINC = @DPMSINC@ -DPMSLIB = @DPMSLIB@ -EXEEXT = @EXEEXT@ -GCJ = @GCJ@ -GCJFLAGS = @GCJFLAGS@ -GLINC = @GLINC@ -GLLIB = @GLLIB@ -GMSGFMT = @GMSGFMT@ -IDL = @IDL@ -IDL_DEPENDENCIES = @IDL_DEPENDENCIES@ -JAR = @JAR@ -JAVAC = @JAVAC@ -JAVAH = @JAVAH@ -JVMLIBS = @JVMLIBS@ -KDECONFIG = @KDECONFIG@ -KDE_CXXFLAGS = @KDE_CXXFLAGS@ -KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ -KDE_INCLUDES = @KDE_INCLUDES@ -KDE_LDFLAGS = @KDE_LDFLAGS@ -KDE_PLUGIN = @KDE_PLUGIN@ -KDE_RPATH = @KDE_RPATH@ -KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ -KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ -KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ -KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ -KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ -LIBCOMPAT = @LIBCOMPAT@ -LIBCRYPT = @LIBCRYPT@ -LIBDL = @LIBDL@ -LIBGEN = @LIBGEN@ -LIBJPEG = @LIBJPEG@ -LIBMICO = @LIBMICO@ -LIBOBJS = @LIBOBJS@ -LIBPNG = @LIBPNG@ -LIBPTHREAD = @LIBPTHREAD@ -LIBPYTHON = @LIBPYTHON@ -LIBQIMGIO = @LIBQIMGIO@ -LIBRESOLV = @LIBRESOLV@ -LIBSHADOW = @LIBSHADOW@ -LIBSM = @LIBSM@ -LIBSOCKET = @LIBSOCKET@ -LIBTIFF = @LIBTIFF@ -LIBTOOL = @LIBTOOL@ -LIBUCB = @LIBUCB@ -LIBUTIL = @LIBUTIL@ -LIBXINERAMA = @LIBXINERAMA@ -LIBZ = @LIBZ@ -LIB_KAB = @LIB_KAB@ -LIB_KDECORE = @LIB_KDECORE@ -LIB_KDEUI = @LIB_KDEUI@ -LIB_KFILE = @LIB_KFILE@ -LIB_KFM = @LIB_KFM@ -LIB_KFORMULA = @LIB_KFORMULA@ -LIB_KHTML = @LIB_KHTML@ -LIB_KIMGIO = @LIB_KIMGIO@ -LIB_KIO = @LIB_KIO@ -LIB_KPARTS = @LIB_KPARTS@ -LIB_KSPELL = @LIB_KSPELL@ -LIB_KSYCOCA = @LIB_KSYCOCA@ -LIB_KWRITE = @LIB_KWRITE@ -LIB_QT = @LIB_QT@ -LIB_SMB = @LIB_SMB@ -LIB_X11 = @LIB_X11@ -LN_S = @LN_S@ -MAKEINFO = @MAKEINFO@ -MCOPIDL = @MCOPIDL@ -MEINPROC = @MEINPROC@ -MICO_INCLUDES = @MICO_INCLUDES@ -MICO_LDFLAGS = @MICO_LDFLAGS@ -MOC = @MOC@ -MSGFMT = @MSGFMT@ -NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ -NOREPO = @NOREPO@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PAMLIBS = @PAMLIBS@ -PASSWDLIBS = @PASSWDLIBS@ -PYTHONINC = @PYTHONINC@ -PYTHONLIB = @PYTHONLIB@ -PYTHONMODDIR = @PYTHONMODDIR@ -QT_INCLUDES = @QT_INCLUDES@ -QT_LDFLAGS = @QT_LDFLAGS@ -RANLIB = @RANLIB@ -REPO = @REPO@ -SETUIDFLAGS = @SETUIDFLAGS@ -STRIP = @STRIP@ -TOPSUBDIRS = @TOPSUBDIRS@ -UIC = @UIC@ -USER_INCLUDES = @USER_INCLUDES@ -USER_LDFLAGS = @USER_LDFLAGS@ -USE_EXCEPTIONS = @USE_EXCEPTIONS@ -USE_RTTI = @USE_RTTI@ -USE_THREADS = @USE_THREADS@ -VERSION = @VERSION@ -XGETTEXT = @XGETTEXT@ -XPMINC = @XPMINC@ -XPMLIB = @XPMLIB@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_INCLUDES = @X_INCLUDES@ -X_LDFLAGS = @X_LDFLAGS@ -X_PRE_LIBS = @X_PRE_LIBS@ -all_includes = @all_includes@ -all_libraries = @all_libraries@ -idldir = @idldir@ -jni_includes = @jni_includes@ -kde_appsdir = @kde_appsdir@ -kde_bindir = @kde_bindir@ -kde_confdir = @kde_confdir@ -kde_datadir = @kde_datadir@ -kde_htmldir = @kde_htmldir@ -kde_icondir = @kde_icondir@ -kde_includes = @kde_includes@ -kde_libraries = @kde_libraries@ -kde_libs_htmldir = @kde_libs_htmldir@ -kde_libs_prefix = @kde_libs_prefix@ -kde_locale = @kde_locale@ -kde_mimedir = @kde_mimedir@ -kde_moduledir = @kde_moduledir@ -kde_servicesdir = @kde_servicesdir@ -kde_servicetypesdir = @kde_servicetypesdir@ -kde_sounddir = @kde_sounddir@ -kde_templatesdir = @kde_templatesdir@ -kde_wallpaperdir = @kde_wallpaperdir@ -micodir = @micodir@ -qt_includes = @qt_includes@ -qt_libraries = @qt_libraries@ -x_includes = @x_includes@ -x_libraries = @x_libraries@ - -SUBDIRS = en -mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs -CONFIG_HEADER = ../config.h -CONFIG_CLEAN_FILES = -DIST_COMMON = Makefile.am Makefile.in - - -DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) - -TAR = gtar -GZIP_ENV = --best -#>- all: all-redirect -#>+ 1 -all: docs-am all-redirect -.SUFFIXES: -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) -#>- cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile -#>+ 2 - cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile - cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status - - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. - -@SET_MAKE@ - -all-recursive install-data-recursive install-exec-recursive \ -installdirs-recursive install-recursive uninstall-recursive \ -check-recursive installcheck-recursive info-recursive dvi-recursive: - @set fnord $(MAKEFLAGS); amf=$$2; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -mostlyclean-recursive clean-recursive distclean-recursive \ -maintainer-clean-recursive: - @set fnord $(MAKEFLAGS); amf=$$2; \ - dot_seen=no; \ - rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ - rev="$$subdir $$rev"; \ - test "$$subdir" != "." || dot_seen=yes; \ - done; \ - test "$$dot_seen" = "no" && rev=". $$rev"; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) - list='$(SOURCES) $(HEADERS)'; \ - unique=`for i in $$list; do echo $$i; done | \ - awk ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - here=`pwd` && cd $(srcdir) \ - && mkid -f$$here/ID $$unique $(LISP) - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS)'; \ - unique=`for i in $$list; do echo $$i; done | \ - awk ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ - || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) - -mostlyclean-tags: - -clean-tags: - -distclean-tags: - -rm -f TAGS ID - -maintainer-clean-tags: - -distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) - -subdir = doc - -distdir: $(DISTFILES) - here=`cd $(top_builddir) && pwd`; \ - top_distdir=`cd $(top_distdir) && pwd`; \ - distdir=`cd $(distdir) && pwd`; \ - cd $(top_srcdir) \ - && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/Makefile - @for file in $(DISTFILES); do \ - d=$(srcdir); \ - if test -d $$d/$$file; then \ - cp -pr $$d/$$file $(distdir)/$$file; \ - else \ - test -f $(distdir)/$$file \ - || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ - || cp -p $$d/$$file $(distdir)/$$file || :; \ - fi; \ - done - for subdir in $(SUBDIRS); do \ - if test "$$subdir" = .; then :; else \ - test -d $(distdir)/$$subdir \ - || mkdir $(distdir)/$$subdir \ - || exit 1; \ - chmod 777 $(distdir)/$$subdir; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \ - || exit 1; \ - fi; \ - done -info-am: -info: info-recursive -dvi-am: -dvi: dvi-recursive -check-am: all-am -check: check-recursive -installcheck-am: -installcheck: installcheck-recursive -install-exec-am: -install-exec: install-exec-recursive - -install-data-am: -install-data: install-data-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am -install: install-recursive -uninstall-am: -uninstall: uninstall-recursive -all-am: Makefile -all-redirect: all-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install -installdirs: installdirs-recursive -installdirs-am: - - -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -rm -f config.cache config.log stamp-h stamp-h[0-9]* - -maintainer-clean-generic: -mostlyclean-am: mostlyclean-tags mostlyclean-generic - -mostlyclean: mostlyclean-recursive - -clean-am: clean-tags clean-generic mostlyclean-am - -#>- clean: clean-recursive -#>+ 1 -clean: kde-rpo-clean clean-recursive - -distclean-am: distclean-tags distclean-generic clean-am - -rm -f libtool - -distclean: distclean-recursive - -maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ - distclean-am - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - -maintainer-clean: maintainer-clean-recursive - -.PHONY: install-data-recursive uninstall-data-recursive \ -install-exec-recursive uninstall-exec-recursive installdirs-recursive \ -uninstalldirs-recursive all-recursive check-recursive \ -installcheck-recursive info-recursive dvi-recursive \ -mostlyclean-recursive distclean-recursive clean-recursive \ -maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ -distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ -dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ -install-exec install-data-am install-data install-am install \ -uninstall-am uninstall all-redirect all-am all installdirs-am \ -installdirs mostlyclean-generic distclean-generic clean-generic \ -maintainer-clean-generic clean mostlyclean distclean maintainer-clean - - -####### kdevelop will overwrite this part!!! (end)############ - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: - -#>+ 2 -docs-am: - -#>+ 5 -force-reedit: - cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile - cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in - - -#>+ 2 -final: - $(MAKE) all-am -#>+ 2 -no-final: - $(MAKE) all-am -#>+ 3 -cvs-clean: - $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean - -#>+ 3 -kde-rpo-clean: - -rm -f *.rpo |