diff options
Diffstat (limited to 'krootwarning/admin/depcomp')
| -rwxr-xr-x | krootwarning/admin/depcomp | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/krootwarning/admin/depcomp b/krootwarning/admin/depcomp new file mode 100755 index 0000000..30f36ee --- /dev/null +++ b/krootwarning/admin/depcomp @@ -0,0 +1,367 @@ +#! /bin/sh + +# depcomp - compile a program generating dependencies as side-effects +# Copyright 1999, 2000 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>. + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi +# `libtool' can also be set to `yes' or `no'. + +depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! + if "$@" -MT "$object" -MF "$tmpdepfile" -MD -MP; then : + else + stat=$? + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + if "$@" -Wp,"$gccflag$tmpdepfile"; then : + else + stat=$? + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). + tr ' ' ' +' < "$tmpdepfile" | sed 's/^[^\.]*\.o://' | tr ' +' ' ' >> $depfile + + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. + tmpdepfile=`echo "$object" | sed 's/\(.*\)\..*$/\1.u/'` + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). + tr ' ' ' +' < "$tmpdepfile" | sed 's/^[^\.]*\.o://' | tr ' +' ' ' >> $depfile + + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the proprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + test -z "$dashmflag" && dashmflag=-M + ( IFS=" " + case " $* " in + *" --mode=compile "*) # this is libtool, let us make it quiet + for arg + do # cycle over the arguments + case "$arg" in + "--mode=compile") + # insert --quiet before "--mode=compile" + set fnord "$@" --quiet + shift # fnord + ;; + esac + set fnord "$@" "$arg" + shift # fnord + shift # "$arg" + done + ;; + esac + "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + ) & + proc=$! + "$@" + stat=$? + wait "$proc" + if test "$stat" != 0; then exit $stat; fi + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + # X makedepend + ( + shift + cleared=no + for arg in "$@"; do + case $cleared in no) + set ""; shift + cleared=yes + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift;; + -*) + ;; + *) + set fnord "$@" "$arg"; shift;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@" + ) & + proc=$! + "$@" + stat=$? + wait "$proc" + if test "$stat" != 0; then exit $stat; fi + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tail +3 "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the proprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + ( IFS=" " + case " $* " in + *" --mode=compile "*) + for arg + do # cycle over the arguments + case $arg in + "--mode=compile") + # insert --quiet before "--mode=compile" + set fnord "$@" --quiet + shift # fnord + ;; + esac + set fnord "$@" "$arg" + shift # fnord + shift # "$arg" + done + ;; + esac + "$@" -E | + sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + ) & + proc=$! + "$@" + stat=$? + wait "$proc" + if test "$stat" != 0; then exit $stat; fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the proprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + ( IFS=" " + case " $* " in + *" --mode=compile "*) + for arg + do # cycle over the arguments + case $arg in + "--mode=compile") + # insert --quiet before "--mode=compile" + set fnord "$@" --quiet + shift # fnord + ;; + esac + set fnord "$@" "$arg" + shift # fnord + shift # "$arg" + done + ;; + esac + "$@" -E | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + ) & + proc=$! + "$@" + stat=$? + wait "$proc" + if test "$stat" != 0; then exit $stat; fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 |