A new part of Krozat (in honour of our dear Chef ;)

22 files changed, 23221 insertions, 0 deletions

diff --git a/krozat/admin/ChangeLog b/krozat/admin/ChangeLog
new file mode 100644
index 0000000..20e979b
--- /dev/null
+++ b/krozat/admin/ChangeLog
@@ -0,0 +1,748 @@
+2000-11-30  David Faure  <faure@kde.org>
+
+	* acinclude.m4.in: Added kde_moduledir which points to $prefix/lib/kde2/
+
+2000-07-24  Alex Zepeda  <jazepeda@pacbell.net>
+
+	* acinclude.m4.in: Remove the test for malloc.h
+
+2000-04-05  Michael Matz  <matz@ifh.de>
+
+        * config.pl : added kludge for compiling regexp's even if
+	perl < 5.005 is installed
+	* conf.change.pl : added support for autoconf 2.14.1
+
+2000-03-27  David Faure  <faure@kde.org>
+
+	* acinclude.m4.in, Makefile.common: changed inst-apps semantics
+	If present, only the subdirs it lists will be configured and compiled.
+	If absent, then subdirs is used (and inst-apps isn't generated anymore)
+
+2000-03-22  David Faure  <faure@kde.org>
+
+	* am_edit: Added support for KDE_ICON = AUTO
+
+2000-03-18  David Faure  <faure@kde.org>
+
+	* Makefile.common: Rewrote the list-of-Makefiles generation to make it
+	simpler and nicer, using create_makefiles' way of doing it.
+	Added support for COMPILE_LAST and COMPILE_FIRST in toplevel Makefile.am
+
+2000-01-05  David Faure  <faure@kde.org>
+
+	* Makefile.common: hacked around autoconf bug (setting INSTALL to ".."
+	when calling a subconfigure and INSTALL is already set).
+
+1999-12-15  Waldo Bastian  <bastian@kde.org>
+
+        * acinclude.m4.in: Test whether Qt compiles AND LINKS without flags.
+
+1999-06-24  Stephan Kulow  <coolo@kde.org>
+
+	* am_edit: generate correct Makefile entries for kde-i18n toplevel directories
+	* am_edit:
+
+1999-06-14  Stephan Kulow  <coolo@kde.org>
+
+	* am_edit: remove idl generated files on make clean
+
+1999-06-09  Stephan Kulow  <coolo@kde.org>
+
+	* am_edit: skipping programs with variables in sources for final
+
+1999-06-07  Stephan Kulow  <coolo@kde.org>
+
+	* am_edit: added support for idl files
+
+1999-06-02  Stephan Kulow  <coolo@kde.org>
+
+	* Makefile.common: preserve comments in .pot files to make it
+		possible for programmers and translators to comment them
+
+1999-06-02  Simon Hausmann <hausmann@kde.org>
+
+        * acinclude.m4.in: added kde_servicetypesdir
+
+1999-06-02  David Faure  <faure@kde.org>
+
+	* acinclude.m4.in: removed LIB_KFM and LIB_KDEUTIL aliases
+
+1999-05-28  Simon Hausmann <hausmann@kde.org>
+
+	* acinclude.m4.in: added kde_servicesdir
+
+1999-05-27  Stephan Kulow  <coolo@kde.org>
+
+	* am_edit: lots of changes for better support of --enable-final
+
+1999-05-22  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: added support for --with-dmalloc
+
+1999-05-19  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: added support for --enable-final
+
+	* am_edit: added support for --enable-final
+	
+1999-05-06  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: change the meaning of --disable-debug
+
+1999-05-04  Helge Deller <deller@gmx.de>
+
+	* acinclude.m4.in: the test for the X-includes/directories failed,
+	when compile & link work without special directories (as on HP-UX).
+
+1999-04-20  Stephan Kulow  <coolo@kde.org>
+
+	* am_edit: adding DESTDIR replacement for rm and uninstall-local
+	too. Seems very useless, but makes testing for uninstall easier
+
+1999-04-01  David Faure  <faure@kde.org>
+
+	* acinclude.m4.in: Added -lkfile to $(LIB_KIO)
+
+1999-03-30  David Faure  <faure@kde.org>
+
+	* acinclude.m4.in: Added AC_CHECK_KDEMAXPATHLEN, which defines KDEMAXPATHLEN.
+
+1999-03-29  David Faure  <faure@kde.org>
+
+	* acinclude.m4.in: added LIB_X11 to XPMLIB and GLLIB, because
+	on SCO, they need it _after_ themselves.
+
+1999-03-28  David Faure  <faure@kde.org>
+
+	* acinclude.m4.in: added LIB_KFM to LIB_KAB alias
+
+1999-03-26  David Faure  <faure@kde.org>
+
+	* acinclude.m4.in: made LIB_KFILE use LIB_KIO instead of LIB_KFM
+	added LIB_KFORMULA
+
+1999-03-20  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: check for libXext - for Russel :)
+
+1999-03-16  Stephan Kulow  <coolo@kde.org>
+
+	* acinclud3.m4.in: extend the MICO test with a list of possible
+	places where to find CORBA.h
+
+1999-03-15  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: move $QTINC and $QTLIB in search path
+
+1999-03-14  Stephan Kulow  <coolo@kde.org>
+
+	* am_edit: install-root is obsolute. Use DESTDIR always
+
+1999-03-03  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: fixing a bug, that $QTDIR was taken before --with-qt*
+	* acinclude.m4.in: added KDE_USE_QT, that you can choose if to
+	use QT 2.0 or KDE 1.0
+	
+	* Makefile.common: added target package-merge
+
+	* am_edit: many fixes to the POFILES handeling of am_edit
+
+1999-03-02  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: first look at libjpeg6b (from kdesupport) then
+	for libjpeg
+
+	* config.*, libtool.*: update to the latest FSF tools
+
+1999-02-23  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: error when Sparc CC is used. Better use it in
+	configure and tell him the story then letting him find it while
+	compiling
+
+	* acinclude.m4.in: adding KDE_CHECK_EXTRA_LIBS to all possible tests,
+	so that --with-extra-includes is used when needed.
+
+	* acinclude.m4.in: configure looks for giflib30, so it should say so
+
+	* acinclude.m4.in: don't overwrite x include parameters. Patch by
+	Ari Lemmke <ari.lemmke@regex.fi> (bug report 741)
+	
+1999-02-20  Stephan Kulow <coolo@kde.org>
+
+	* acinclude.m4.in: fixing KDE_CHECK_PATHS for rechecking. In case
+	of defaults (kdelibs) configure didn't cache the results
+
+1999-02-18  David Faure  <faure@kde.org>
+
+	* acinclude.m4.in: added AC_CHECK_S_ISSOCK, to fix #706.
+
+1999-02-17  David Faure  <faure@kde.org>
+
+	* acinclude.m4.in: added AC_CHECK_RANDOM, just like
+	AC_CHECK_USLEEP, to enable the fake if necessary.
+
+1999-02-13  Kurt Granroth <granroth@kde.org>
+
+        * acinclude.m4.in: look for QT-2.0
+
+1999-02-05  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: in macro KDE_FIND_PATH treat user given dirs
+	and $PATH dirs the same. Added seperate test for to find binary
+	($5) to replace findperl
+
+1999-01-28  Stephan Kulow  <coolo@kde.org>
+
+	* automoc: added patch by jbb to be a little bit more precise about
+	the number of sourcefiles that include the moc file if it's != 1.
+	Besides that automoc will fail with exit code, so the Makefile.cvs
+	process does stop in case a problem accoured.
+
+	* automoc: don't hardcode header suffix, but allow *.h, *.hh and *.H
+	
+1999-01-27  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: try qobjcoll.h and qapplication.h before saying
+	OK to qt headers. (I could kill SuSE for splitting into qt-dev
+	and qt-compat)
+
+1991-01-23  Stephan Kulow  <coolo@kde.org>
+
+	* automoc: added fixes by JB <jb.nz@writeme.com>
+
+1999-01-21  Stephan Kulow  <coolo@kde.org>
+
+	* automoc: added --help and --path (for use in dist-hook)
+
+1999-01-20  Alex Zepeda  <garbanzo@hooked.net>
+	
+	* ltconfig: added entries for FreeBSD 4.x
+
+1999-01-19  Stephan Kulow  <coolo@kde.org>
+
+	* automoc: added a distclean-metasources target which deletes all
+	moc files and let distclean depend on it
+
+1999-01-18  Stephan Kulow  <coolo@kde.org>
+
+        * automoc: several fixes (ignore comment lines + join lines
+         with \ )
+	
+	* automoc: support META_INCLUDES in case the header files are
+	not in the same dir as the sources.
+
+1999-01-17  Stephan Kulow  <coolo@kde.org>
+
+	* automoc: several fixes.
+
+1999-01-16  Stephan Kulow  <coolo@kde.org>
+
+	* automoc: added support for included MOC files.
+
+	* acinclude.m4.in: use srcdir for the subdirs stuff as well
+
+	* automoc: added better command line parsing and some preparation
+	for handling "normal" moc files
+
+	* acinclude.m4.in: added aliases for libkio and libkdeutil
+
+1999-01-15  Harri Porten  <porten@kde.org>
+
+	* automoc: Carved in stone syntax for Makefile.in:
+	{program}_METASOURCES = USE_AUTOMOC [{suffix}]
+
+1999-01-15  Stephan Kulow  <coolo@kde.org>
+
+	* Makefile.common: set top_srcdir to .
+
+1999-01-14  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: don't use config.h.bot any longer
+
+1999-01-08  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: added KDE_CHECK_NEWLIBS
+
+	* acinclude.m4.in: test for Qt even if both --with-qt-headers and
+	--with-qt-libraries are given. They may be wrong.
+	
+1999-01-06  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: change the MOC test so it can be used for other
+	tools as well
+
+1998-12-28  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: look for QT-1.42 since kpanel needs it
+
+1998-12-27  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: added /usr/lib for libpython test
+	
+	* acinclude.m4.in: take my email address out of it and added a
+	reference to www.kde.org/faq
+
+	* acinclude.m4.in: use Qt >= 1.4
+
+	* acinclude.m4.in: added KDE_CHECK_NAMESPACES
+	
+1998-12-18  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: test for directories to exist before saying yes
+	to compilation :)
+
+1998-12-14  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: added CPLUSPLUS for the kimgio test. It's
+	only important for shaman right now, but at least there it is :)
+
+1998-12-12  Stephan Kulow  <coolo@kde.org>
+
+	* Makefile.cvs: added common Makefile.cvs
+
+	* acinclude.m4.in: Thomas.Schwarz@pro-sieben.de reported a very ugly
+	bug in AC_PROG_CXXCPP, so I added my own version
+	
+	* acinclude.m4.in: added KDE_CREATE_SUBDIRS_LIST to simplify
+	most toplevel configures
+
+1998-12-11  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: added call to AC_PROG_CXXCPP. Not really sure why
+	it never caused problems
+
+	* acinclude.m4.in: moved LIBTIFF alias
+
+	* acinclude.m4.in: only test for the existance of libkimgio if the
+	user wants to. For 99% of the applications it doesn't matter if
+	configure can find libkimgio :)
+	
+1998-12-10  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: some changes to the python check to handle $LIBDL
+
+1998-12-09  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: make Alex's tiff test a real one
+	
+	* acinclude.m4.in: fix the LIB_TIFF alias to really expand
+
+1998-12-08  Alex Zepeda  <garbanzo@hooked.net>
+
+	* acinclude.m4.in: Fix tiff test to use libtiff34 if it exists.
+	This is what the FreeBSD port installs to for whatever reason.
+
+	* acinclude.m4.in: s/kde/KDE/ (at least in some of the
+	descriptions, obviously no variable names were touched.
+
+1998-12-08  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: moved the LIB_QT alias to the Qt check
+	
+	* acinclude.m4.in: unset KDEDIR before running conftest
+	
+	* acinclude.m4.in: fixed mean typo
+	
+	* acinclude.m4.in: added the copyright header for the gettext
+	tests, so that people know we're legal ;)
+
+	* acinclude.m4.in: set language to C++ before testing QIMGIO	
+
+1998-12-07  Alex Zepeda  <garbanzo@hooked.net>
+
+	* acinclude.m4.in: Fix PNG test to use correct ANSI C code, and
+	not trip up gcc.
+
+1998-12-07  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: don't hardcode -ldl
+	
+	* acinclude.m4.in: move the LIB_X11 alias to the X test to make it
+	useful for kdesupport as well
+	
+	* acinclude.m4.in: give the word CHECK_KIMGIO a meaning in really
+	checking for it
+
+	* acinclude.m4.in: simple fix to prevent kimgio test from compiling
+	KDE application in kdelibs
+
+1998-12-05  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: let KDE_CHECK_KIMGIO depend on AC_PATH_KDE,
+	otherwise most tests fail. It didn't mean anything to 90% of the
+	packages since they test for KDE before kimgio, but for shaman
+	it does
+
+	* ltconfig: the real fix for the Solaris && gcc problem.
+	Thanks Kurt for reporting it and Alexandre for fixing it :)
+
+1998-12-04  Stephan Kulow  <coolo@kde.org>
+
+	* libtool.*: update again
+
+	* acinclude.m4.in: changed the function to test for libnsl to
+	inet_ntoa since UnixWare 7's version did not have gethostbyname,
+	but needs libnsl
+
+1998-12-02  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: fixed the MOC test (again) to use the PATH variable
+	correctly (with the correct seperator)
+
+	* config.guess: update from the soon to be released autoconf-2.13
+
+1998-12-01  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: fixes for the MOC test. Use PATH now when found
+
+1998-11-30  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: extended the MOC test. It checks now for the
+	first line of the output of "moc --help" and looks for Qt in it.
+
+1998-11-27  Stephan Kulow  <coolo@kde.org>
+
+	* ltconfig: another libtool update. Fixes an ugly bug on Solaris,
+	when GNU ld is in path before Solaris ld, but gcc uses the later
+
+1998-11-26  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: made the Qt test more advance to check for qt
+	1.41 - I still need to make it better, but there shouldn't be too
+	many qt releases in a row, would there? ;)
+
+	* ltconfig: libtool update with better BSD/OS support
+
+1998-11-22  Stephan Kulow  <coolo@kde.org>
+
+	* ltconfig: cool - libtool uses g++ now to link libraries on Solaris.
+	This means, static objects become usuable on that plattforms (some
+	others as well).
+
+1998-11-20  Stephan Kulow  <coolo@kde.org>
+
+	* ltmain.sh: updated libtool from their CVS - fixes bugs we haven't
+	found and adds some more features, that we do not need ;-)
+
+1998-11-19  David Faure  <faure@kde.org>
+
+	* acinclude.m4.in: added AC_CHECK_UTMP_FILE, taken from kdebase
+
+1998-11-16  Harri Porten  <porten@kde.org>
+
+	* automoc: take care of "ar" object files, too.
+
+1998-11-16  Stephan Kulow  <coolo@kde.org>
+
+	* libtool.m4.in: revised my --silent patch. The solution
+	Alexandre suggested is much better.
+
+1998-11-15  Stephan Kulow  <coolo@kde.org>
+
+	* ltconfig.in: done some tweakings to support -export-dynamic
+	with egcs
+
+	* config.sub: wow - BeOS support :)
+
+1998-11-14  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: don't use rpath for test program, if rpath is
+	disabled for applications
+
+	* ltconfig: patched libtool to make it silent without making
+	ltconfig silent
+
+	* acinclude.m4.in: make libtool silent again
+
+	* libtool.m4.in: update to libtool-981114 (untested stuff, but
+	we have to test it to make it tested - sounds that logical? :-)
+
+	* libtool.m4.in: moved the self stricked libtool tests to "our"
+	file.
+
+	* acinclude.m4.in: moved ChangeLog of kdebase which I used to
+	maintain acinclude.m4.in logs to kde-common/admin. Hopefully I
+	will maintain it more often from now on :)
+
+1998-07-27  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: fixed some things in the MOC test
+
+	* acinclude.m4.in: fixed this damn msgfmt test
+
+1998-06-02  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: ignore msgfmt, if not GNU gettext
+
+1998-05-28  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: fixed KDE_CHECK_STL. Checks for HP and SGI type
+
+	* acinclude.m4.in: embraced every variable with "" to make
+	it consistent
+
+	* acinclude.m4.in: various fixes for the koffice checks
+	(mico, ministl and python)
+
+1998-05-16  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: don't use KDE_CHECK_QT_DIRECT, when
+	--with-qt-libs are given
+
+1998-04-21  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: cool, I found the trick to suppress the ls
+	errors
+
+1998-04-20  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: rewrote the qt checking test, since it
+	didn't work under FreeBSD, since it relied on the .so link.
+	The new version is a little bit buggy, but I need some testing
+	to make it perfect
+
+	* acinclude.m4.in: fixed the side effects of the PAM test
+
+1998-04-18  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: hopefully fixed the PAM test (I rewrote it)
+
+1998-04-16  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: extended the getsockname test inspired
+	by a patch by Martin Baulig
+
+	* configure.in: added test for utmp file
+
+	* acinclude.m4.in: made --without-pam default
+	
+
+1998-04-06  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: don't test compiling, linking, running in
+	one step. This proved to be too dangerous for my mail box.
+	
+1998-03-21  Stephan Kulow  <coolo@kde.org>
+
+	* libtool.m4.in: created some new macros to work around this
+	ugly (because long) help of configure --enable-shared/static
+
+1998-03-05  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: set language to C++ before trying the ksize_t
+	test
+
+	* configure.in: sorted the Makefile entries alphabeticly (and all
+	together: we love xemacs! we love xemacs! ;)
+	
+	* configure.in: added sk
+
+	* acinclude.m4.in: substitute x_libraries to fix the empty -rpath
+	
+1998-03-03  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: add a rpath for every shared library, that is
+	linked too (especially X11 libraries)
+	
+Tue Feb 24 22:04:59 1998  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: added kde_sounddir and set kde_minidir to
+	kde_icondir/mini to break not too much
+
+Sun Feb 15 18:25:50 1998  Stephan Kulow  <coolo@kde.org>
+
+	* configure.in: added bugfix by Bob Miller <kbob@engr.sgi.com>
+	(correct reset of IFS)
+	
+Wed Feb 11 00:53:11 1998  Stephan Kulow  <coolo@kde.org>
+
+	* configure.in: made shadow under Linux default, since the
+	binaries will work also under non-shadow systems. The only problem
+	left is PAM, so I disabled shadow in case, PAM is present
+
+Tue Feb 10 16:46:32 1998  Stephan Kulow  <coolo@kde.org>
+
+	* configure.in: added test for nice to find out, if the option
+	-nice works for the screensavers
+
+	* acinclude.m4.in: port to LynxOS. For this I moved all library
+	search routines in KDE_MISC_TESTS, so I don't need to write this
+	in every package
+
+	* README: some grammar fixes
+
+	* acinclude.m4.in: search for the libs in the exec_prefix, when
+	it's present
+	
+Sun Feb  8 14:07:23 1998  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: updated all packages
+
+	* libtool.m4.in: applied patch for libtool.m4.in to show the
+	correct default for shared and static
+	
+
+Sat Feb  7 10:56:00 1998  Stephan Kulow  <coolo@kde.org>
+
+	* configure.in: good news - KDE is relocatable again.
+
+	* libtool.m4.in: updated to latest libtool 1.0i
+
+Fri Feb  6 21:26:51 1998  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: added a AC_PROVIDE for AC_PROG_CC and
+	AC_PROG_CPP to KDE_CHECK_COMPILERS
+
+Thu Feb  5 16:27:47 1998  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: put $QTDIR/bin before /usr/bin in the path to
+	look for moc. I don't know why, but I got a report, that configure
+	found /usr/bin/moc under Solaris
+
+Fri Jan 30 15:47:50 1998  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: export LIBRARY_PATH after reset to the saved
+	value
+	
+	* acinclude.m4.in: unset the LIBRARY_PATH to get a relieable
+	result when trying to find, if Qt compiles without -L
+
+Sat Jan 24 00:45:52 1998  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: fixed another bug in AC_PATH_KDE
+
+Thu Jan 22 14:46:15 1998  Stephan Kulow  <coolo@kde.org>
+
+	* configure.in: fixed an ugly bug in AC_BASE_PATH_KDE
+
+	* kappfinder/kappfinder.in: let kappfinder create by configure to
+	allow the use of the kde_ paths
+
+Wed Jan 21 22:19:35 1998  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in: - added a install_root prefix to all paths, if
+	set, to enable package managers to move the whole installation at once
+	- added --with-install-root to set the install_root prefix
+
+Tue Jan 20 22:41:04 1998  Stephan Kulow  <coolo@kde.org>
+
+	* configure.in: added NOOPT_CXXFLAGS to allow kioslave to be
+	compiled without -O2
+
+Mon Jan 19 21:55:21 1998  Stephan Kulow  <coolo@kde.org>
+
+	* configure.in: some little fixes for the Makefiles
+
+	* acinclude.m4.in: --prefix will no longer override the search for
+	libraries. If they are present somewhere, they are used (through
+	the methodes in KApplication)
+
+Mon Jan 12 00:30:36 1998  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in fixed an ugly bug, that accoured, when
+	qt_libraries is not set (empty/equals X11/not necessary)
+	
+	* acinclude.m4.in moved the remove of the files after the error
+	detection
+	
+
+Sun Jan 11 17:27:53 1998  Stephan Kulow  <coolo@kde.org>
+
+	* acinclude.m4.in added a new macro KDE_CHECK_QT_DIRECT to unset
+	the Qt library path, if a Qt program compiles without them
+		
+	* acinclude.m4.in added a return value in the CREATE_KFSSTND
+	macro. Perhaps this has caused the problems
+
+Sat Jan 10 17:40:44 1998  Stephan Kulow  <coolo@kde.org>
+
+	* ChangeLog started to maintain a ChangeLog file again
+	* acinclude.m4.in the AC_CREATE_KFSSTND to get better debug output
+	to find the problem
+	
+
+Old logs, Stephan Kulow made:
+	
+0.1 : first steps with libkde
+0.2 : first release with libkde, khtmlw, kdehelp, acli, kwm, kpanel
+0.3 : added kfm and bugfixes
+0.4 : updated khtmlw, kdehelp, kwm, changed install in all subdirs
+0.5 : support libtool (chooseable shared libs)
+0.6 : split libkde in kdecore and kdeui
+0.6.1 : Bugfixes
+0.7 : added code from Janos Farkas (configure)
+    : added @{kde,qt}_{includes,libraries}@
+0.7.1: Bugfixes
+0.7.2: Bugfixes
+0.7.3: added @all_includes@ and @all_libraries@
+       replaced all incompatible flags like $(CC) and -DHAVE_UNISTD_H
+0.7.4: changed support for libkde (back in it's own)
+       added kpat
+       updated kpanel, kwm, kghostview
+0.8: removed a bug in kghostview
+	lifted installation process of several apps
+	splitt kdebase into kdelibs and kdeapps	
+	updated khtmlw, kfm and kdehelp
+	added kcalc and kpaint
+	updated kdisplay
+	added kscreensaver
+	added --enable-kscreensaver
+	added --enable-debug (and @CXXFLAGS@ to all Makefile.ins)
+	updated kwm to 0.4.7
+	added make uninstall to every app
+	added kvt
+	added khexdit
+	added .kdelnk for kmines, kedit, ktetris
+	put kwm, kfind's .kdelnk in the right directories
+	replaced --enable-kscreensaver by --disable-kscreensaver
+	updated kpanel to 0.15
+	some bugfixes (thanks Marco)
+	some bugfixes (thanks Martin)
+	changed acinclude.m4, because aclocal won't
+	updated kwm to 0.4.8 (patched it again for Qt-1.2)
+	updated kvt to 0.13 (patch from Matthias)
+	patched kvt and kwm
+	updated kwm to 0.5.0
+	updated kvt for 0.14 (again and again :-)
+	updated kview to 0.10
+	updated kfm to 0.6.3
+ 	patched kscreensaver for FreeBSD (thanks Marc)
+0.9: updated kdisplay to 0.5.3
+	added klogout
+	patches from Matthias
+	updated kfm to 0.6.4
+	updated kghostview to 0.4
+	added QTINC and QTLIB
+	updated kdehelp to 0.4.11
+	patched kfm to support ktoolbar
+	updated kedit to kedit+
+	added kfontmanager 0.2.1
+0.9.1: changed kpaint's make style
+	bugfixing
+	updated kmines to 0.6.5
+	updated ktetris to 0.2.4
+	changed to Makefiles to depend on Makefile.in
+	changed the Makefiles to let install depend on all
+	added kjots-0.2.2
+	updated kjots-0.2.3
+	updated kfm to 0.6.6
+	updated kjots-0.2.4
+	updated kpaint-0.2
+	updated kedit to 0.5
+	updated kfontmanager to 0.2.2
+	updated kfm to 0.6.7
+	updated ktetris to 0.2.5
+	updated kjots to 0.2.5
+0.10: added HAVE_SQRTL
+	added HAVE_CRYPT_H
+	updated kfind
+	updated kfm to kfm-0.8.1
+	re-introduced automake to kdebase
+	bugfixes for the configure.in
+	added XPM, GL and PAM tests to configure
+	added morph3d to kscreensavers
+	updated kfind to 0.3.2
+	added some patches for SGI
+... lost the time to maintain a Changelog ;)
diff --git a/krozat/admin/Makefile.common b/krozat/admin/Makefile.common
new file mode 100644
index 0000000..f3116b5
--- /dev/null
+++ b/krozat/admin/Makefile.common
@@ -0,0 +1,295 @@
+
+SHELL=/bin/sh
+
+cvs:
+	@if grep '$$(top_srcdir)/acinclude.m4:' Makefile.am >/dev/null; then \
+	  echo "*** Creating acinclude.m4" ;\
+	  rm -f acinclude.m4 configure.files ;\
+	  $(MAKE) -f Makefile.am top_srcdir=. acinclude.m4 ;\
+	fi
+	@echo "!!! If you get recursion errors from autoconf, it is advisable to set the"
+	@echo "    environment variable M4 to something including \"--nesting-limit=500\""
+	@if test -r configure.in.in; then \
+	  rm -f subdirs configure.in ;\
+	  echo "*** Creating list of subdirectories" ;\
+	  $(MAKE) -f Makefile.am top_srcdir=. subdirs ;\
+	  echo "*** Creating configure.in" ;\
+	  $(MAKE) -f Makefile.am top_srcdir=. configure.in ;\
+	fi
+	@echo "*** Creating aclocal.m4"
+	@aclocal
+	@echo "*** Creating configure"
+	@autoconf
+	@if test -r configure.in.in ; then \
+	  perl -pi -e 'print "if test \"x\$$with_fast_perl\" = \"xyes\" ;\
+	  then\n  perl -i.bak \$$ac_aux_dir/conf.change.pl \$$CONFIG_STATUS\
+	  || mv \$$CONFIG_STATUS.bak \$$CONFIG_STATUS;\
+	  \n  rm -f \$$CONFIG_STATUS.bak;\nfi\
+	  \n" if /^\s*chmod\s+.*\+x\s+.*CONFIG_STATUS/;' configure ;\
+	fi
+	@if grep '} \$$ac_kw foo' configure >/dev/null 2>&1; then perl -p -i -e "s/ac_kw foo/ac_kw int foo/" configure; fi
+#David's hack for autoconf bug when $INSTALL is set
+	@perl -pi -e 'if (/\[\/\$$\]\*. INSTALL=/) { print $$_ ; $$_ = "\"\") ;;\n"; }' configure
+	@if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then \
+	  echo "*** Creating config.h template" ;\
+		autoheader ;\
+	fi
+	@echo "*** Creating Makefile templates"
+	@automake
+	@echo "*** Postprocessing Makefile templates"
+	@perl admin/am_edit
+	@if egrep "^cvs-local:" Makefile.am >/dev/null; then \
+	  $(MAKE) -f Makefile.am cvs-local ;\
+	fi
+	@echo "*** Creating date/time stamp"
+	@touch stamp-h.in
+	@echo "*** Finished"
+	@echo "    Don't forget to run ./configure"
+	@echo "    If you haven't done so in a while, run ./configure --help"
+
+dist:	
+	@if grep -e '$$(top_srcdir)/acinclude.m4:' Makefile.am >/dev/null; then \
+	  $(MAKE) -f Makefile.am top_srcdir=. acinclude.m4 ;\
+	fi
+	@if test -r configure.in.in; then \
+	  $(MAKE) -f Makefile.am top_srcdir=. subdirs configure.in; \
+	fi ;\
+	aclocal; \
+	autoheader; \
+	automake --foreign --include-deps; \
+	perl admin/am_edit; \
+	autoconf; \
+	if test -r configure.in.in ; then \
+	  perl -pi -e 'print "if test \"x\$$with_fast_perl\" = \"xyes\" ;\
+	  then\n  perl -i.bak \$$ac_aux_dir/conf.change.pl \$$CONFIG_STATUS\
+	  || mv \$$CONFIG_STATUS.bak \$$CONFIG_STATUS;\
+	  \n  rm -f \$$CONFIG_STATUS.bak;\nfi\
+	  \n" if /^\s*chmod\s+.*\+x\s+.*CONFIG_STATUS/;' configure ;\
+	fi ;\
+	touch stamp-h.in; \
+	if grep -e "^cvs-local:" Makefile.am >/dev/null; then \
+	  $(MAKE) -f Makefile.am cvs-local ;\
+	fi ;\
+	if grep "ac_kw foo" configure >/dev/null 2>&1; then perl -p -i -e "s/ac_kw foo/ac_kw int foo/" configure; fi ;\
+	if test -d po; then \
+	 LIST=`find ./po -name "*.po"`; \
+	 for i in $$LIST; do \
+	  file2=`echo $$i | sed -e "s#\.po#\.gmo#"`; \
+	  msgfmt -o $$file2 $$i || touch $$file2; \
+	 done ;\
+	fi
+	@if grep -e "^cvs-dist-local:" Makefile.am >/dev/null; then \
+	  $(MAKE) -f Makefile.am cvs-dist-local ;\
+	fi
+
+cvs-clean:
+	@if test ! -d CVS; then \
+	  echo "You don't have a toplevel CVS directory."; \
+	  echo "You most certainly didn't use cvs to get these sources."; \
+	  echo "But this function depends on cvs's information."; \
+	  exit 1 ;\
+	fi;\
+	pwd=`pwd` ;\
+	dirs=`find . -type d | grep -v CVS | sed -e "s#^./##"` ;\
+	for i in $$dirs; do \
+	  if test ! -d "$$pwd/$$i/CVS"; then \
+	    echo "D $$i" ;\
+	    rm -rf "$$pwd/$$i"; \
+	    continue; \
+	  fi ;\
+	  cd $$pwd/$$i ;\
+	  for f in * .*; do \
+	    if test ! -d "$$f"; then \
+	      if grep "^/$$f/" CVS/Entries > /dev/null; then \
+		a="b"; \
+	      else \
+	        echo "F $$i/$$f"; \
+		rm -f "$$pwd/$$i/$$f"; \
+	      fi; \
+	    fi ; \
+	  done; \
+	done
+
+
+# The Makefiles have to be sorted for slashes, since configure creates
+# only one directory per Makefile not the whole hierarchy
+configure.in: configure.files $(shell test -f configure.files && cat configure.files) subdirs
+	@rm -f configure.in configure.in.new ;\
+	cat `cat configure.files | egrep -v "^configure.in.bot"` >> configure.in.new ;\
+	echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new ;\
+	echo "AC_OUTPUT( \\" >> configure.in.new ;\
+	mfs=`find . -type d -print | fgrep -v "/." | sed -e "s#\./##" -e "/^debian/d" | sort`; \
+	for i in $$mfs; do \
+	  topleveldir=`echo $$i| sed -e "s#/.*##"`; \
+	  if test -f $$topleveldir/configure.in; then \
+		continue; \
+	  fi ;\
+	  if test ! -f $$i/Makefile.am; then \
+		continue; \
+	  fi ;\
+	  if test -s inst-apps; then \
+	    if test -z "`grep \"^$$topleveldir\" inst-apps`"; then \
+		continue; \
+	    fi ;\
+	  fi ;\
+	  echo "$$i/Makefile \\" >> configure.in.new ;\
+	done ;\
+	egrep '^dnl AC_OUTPUT\(.*\)' `cat configure.files` | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1 \\\\#" >> configure.in.new ;\
+	echo ")" >> configure.in.new
+	@modulename= ;\
+	if test -f configure.in.in; then \
+	   if head -2 configure.in.in | egrep "^#MIN_CONFIG$$" > /dev/null; then \
+	      line=`egrep "^AM_INIT_AUTOMAKE\(" configure.in.in` ;\
+	      if test -n "$$line"; then \
+		  modulename=`echo $$line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"` ;\
+		  VERSION=`echo $$line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"` ;\
+	       fi ;\
+	      sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" configure.in.new > configure.in \
+		  && mv configure.in configure.in.new ;\
+	   fi ;\
+	fi ;\
+	if test -z "$$modulename" || test "$$modulename" = "@MODULENAME@"; then \
+	   modulename=`pwd`; modulename=`basename $$modulename`; \
+	fi ;\
+	if test -z "$$VERSION" || test "$$VERSION" = "@VERSION@"; then \
+	     VERSION="\"2.2\"";  \
+	fi ;\
+	sed -e "s#@MODULENAME@#$$modulename#" configure.in.new | \
+		sed -e "s#@VERSION@#$$VERSION#" > configure.in
+	@if test -f configure.in.bot ; then cat configure.in.bot >> configure.in ; fi
+	@rm -f configure.in.new
+
+configure.files: subdirs
+	@admindir=NO ;\
+	for i in . .. ../.. ../../..; do \
+	  if test -x $$i/admin; then admindir=$$i/admin; break; fi; \
+	done ;\
+	rm -rf configure.files ;\
+	if test -f configure.in.in && head -2 configure.in.in | egrep "^#MIN_CONFIG$$" > /dev/null; then \
+		echo $$admindir/configure.in.min >> configure.files  ;\
+	fi
+	@test -f configure.in.in && echo configure.in.in >> configure.files
+	@list=`find . -name "configure.in.in" | sort`; \
+	for i in $$list; do if test -f $$i && test ! `dirname $$i` = "." ; then \
+	  echo $$i >> configure.files ;\
+	fi; done
+	@if test -f configure.in.mid ; then echo configure.in.mid >> configure.files ; fi
+	@if test -f configure.in.bot ; then echo configure.in.bot >> configure.files ; fi
+
+subdirs:
+	@files=`ls -1 | sort`; \
+	dirs= ;\
+	lib_dirs= ;\
+	first_dirs= ;\
+	last_dirs= ;\
+	compilefirst=`grep '^COMPILE_FIRST[ ]*=' Makefile.am | \
+		sed -e 's#^COMPILE_FIRST[ ]*=[ ]*#|#' | sed -e 's#$$#|#' | sed -e 's# #|#g'`;\
+	compilelast=`grep '^COMPILE_LAST[ ]*=' Makefile.am | \
+		sed -e 's#^COMPILE_LAST[ ]*=[ ]*#|#' | sed -e 's#$$#|#' | sed -e 's# #|#g'`;\
+	for i in $$files; do if test -d $$i; then \
+	    if test -f $$i/Makefile.am; then \
+		if echo $$compilefirst | grep "|$$i|" >/dev/null; then \
+			first_dirs="$$first_dirs $$i" ;\
+		elif echo $$compilelast | grep "|$$i|" >/dev/null; then \
+			last_dirs="$$last_dirs $$i" ; \
+		else dirs="$$dirs $$i" ;\
+		fi ;\
+	     fi ;\
+	   fi; \
+	done ;\
+	rm -f SUBDIRS ;\
+	for i in $$dirs; do \
+	echo $$i >> ./SUBDIRS; \
+	done
+	@if test -r subdirs && diff subdirs SUBDIRS > /dev/null; then \
+	  rm -f SUBDIRS; \
+	fi
+	@test -r SUBDIRS && mv SUBDIRS subdirs || true
+
+package-merge:
+	@catalogs='$(POFILES)'; \
+	for cat in $$catalogs; do \
+	echo $$cat $$name; \
+	msgmerge -o $$cat.new $$cat $(PACKAGE).pot ; \
+	if test -s $$cat.new; then \
+	  grep -v "\"POT-Creation" $$cat.new > $$cat.new.2 ; \
+	  grep -v "\"POT-Creation" $$cat >> $$cat.new.1; \
+	  if diff $$cat.new.1 $$cat.new.2; then \
+		rm $$cat.new;  \
+	  else  \
+		mv $$cat.new $$cat ; \
+	fi; \
+	rm -f $$cat.new.1 $$cat.new.2 ;\
+	fi ;\
+	done
+
+
+package-messages:
+	@rm -rf po.backup ;\
+	mkdir po.backup ;\
+	for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do \
+	  egrep -v '^#([^:]|$)' po/$$i | egrep '^.*[^ ]+.*$$' | grep -v "\"POT-Creation" > po.backup/$$i ; \
+	  cp po/$$i po.backup/backup_$$i ;  \
+	  touch -r po/$$i po.backup/backup_$$i ;\
+	  rm po/$$i ;\
+	done
+	@podir=$${podir:-$$PWD/po} ;\
+	files=`find . -name Makefile.am | xargs egrep -l '^messages:' `; \
+	dirs=`for i in $$files; do echo \`dirname $$i\`; done`; \
+	tmpname="$$PWD/messages.log" ;\
+	if test -z "$$EXTRACTRC"; then EXTRACTRC=extractrc ; fi ;\
+	if test -z "$$PREPARETIPS"; then PREPARETIPS=preparetips ; fi ;\
+	export EXTRACTRC PREPARETIPS ;\
+	for subdir in $$dirs; do \
+	  test -z "$$VERBOSE" || echo "Making messages in $$subdir"; \
+	  (cd $$subdir ;\
+	   if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then \
+	   	$$EXTRACTRC *.rc *.ui > rc.cpp ;\
+	   else \
+		candidates=`ls -1 *.rc *.ui 2>/dev/null` ;\
+		if test -n "$$candidates"; then \
+		    echo "$$subdir has *.rc or *.ui files, but not correct messages line" ;\
+		fi ;\
+	   fi ;\
+	   if test -n "`grep -r KAboutData *.c* *.C* 2>/dev/null`"; then \
+		echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp ;\
+	   else echo " " > _translatorinfo.cpp ;\
+	   fi; \
+	   perl -e '$$mes=0; while (<STDIN>) { if (/^messages:/) { $$mes=1; print $$_; next; } if ($$mes) { if (/$$\\(XGETTEXT\)/ && / -o/) { s/ -o \$$\(podir\)/ _translatorinfo.cpp -o \$$\(podir\)/ } print $$_; } else { print $$_; } }' < Makefile.am > _transMakefile ;\
+	   $(MAKE) -s -f _transMakefile podir=$$podir EXTRACTRC="$$EXTRACTRC" PREPARETIPS="$$PREPARETIPS" \
+	   XGETTEXT="$${XGETTEXT:-xgettext} -C -ki18n \
+	   -kI18N_NOOP -ktranslate -kaliasLocale \
+	   -x $${includedir:-$$KDEDIR/include}/kde.pot" \
+	   messages ) >$$tmpname 2>&1 ;\
+	   test -s $$tmpname && (echo $$subdir ; cat $$tmpname) ;\
+	   test ! -f $$subdir/rc.cpp || rm -f $$subdir/rc.cpp ;\
+	   rm -f $$subdir/_translatorinfo.cpp ;\
+	   rm -f $$subdir/_transMakefile ;\
+	done
+	rm -f $$tmpname
+	@for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do \
+	  if test ! -f po/$$i; then echo "disappeared: $$i"; fi ;\
+	done
+	@for  i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do \
+	   egrep -v '^#([^:]|$)' po/$$i | egrep '^.*[^ ]+.*$$' | grep -v "\"POT-Creation" > temp.pot ;\
+	  if test -f po.backup/$$i && test -n "`diff temp.pot po.backup/$$i`"; then \
+	 	echo "will update $$i"; \
+		msgmerge -q po.backup/backup_$$i po/$$i > temp.pot ;\
+	        mv temp.pot po/$$i; \
+	   else \
+	    if test -f po.backup/backup_$$i; then \
+	      test -z "$$VERBOSE" || echo "I'm restoring $$i" ;\
+	      mv po.backup/backup_$$i po/$$i; \
+	      rm po.backup/$$i; \
+	    else \
+	      echo "will add $$i" ;\
+	    fi ;\
+	fi ;\
+	done
+	@rm -f temp.pot
+	@rm -rf po.backup
+
+test:
+	perl -e '$$mes=0; while (<STDIN>) { if (/^messages:/) { $$mes=1; print $$_; next; } if ($$mes) { if (! /^\t/) { exit(0); } if (/$$\\(XGETTEXT\)/ && / -o/) { s/ -o/ _translatorinfo.cpp -o/ } print $$_;  } }' < Makefile.am
+
+.SILENT:
diff --git a/krozat/admin/acinclude.m4.in b/krozat/admin/acinclude.m4.in
new file mode 100644
index 0000000..ac6852d
--- /dev/null
+++ b/krozat/admin/acinclude.m4.in
@@ -0,0 +1,4117 @@
+##   -*- autoconf -*-
+
+dnl    This file is part of the KDE libraries/packages
+dnl    Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu)
+dnl              (C) 1997,98,99 Stephan Kulow (coolo@kde.org)
+
+dnl    This file is free software; you can redistribute it and/or
+dnl    modify it under the terms of the GNU Library General Public
+dnl    License as published by the Free Software Foundation; either
+dnl    version 2 of the License, or (at your option) any later version.
+
+dnl    This library is distributed in the hope that it will be useful,
+dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+dnl    Library General Public License for more details.
+
+dnl    You should have received a copy of the GNU Library General Public License
+dnl    along with this library; see the file COPYING.LIB.  If not, write to
+dnl    the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+dnl    Boston, MA 02111-1307, USA.
+
+dnl IMPORTANT NOTE:
+dnl Please do not modify this file unless you expect your modifications to be
+dnl carried into every other module in the repository. If you decide that you
+dnl really want to modify it, contact coolo@kde.org mentioning that you have
+dnl and that the modified file should be committed to every module.
+dnl
+dnl Single-module modifications are best placed in configure.in for kdelibs
+dnl and kdebase or configure.in.in if present.
+
+dnl ------------------------------------------------------------------------
+dnl Forward compatibility macros (make autoconf 2.13 look like 2.50),
+dnl thanks to Raja R Harinath.
+dnl ------------------------------------------------------------------------
+dnl
+ifdef([_AC_PATH_X_DIRECT],[],
+   [AC_DEFUN([_AC_PATH_X_DIRECT],[AC_PATH_X_DIRECT])])
+ifdef([_AC_PATH_X_XMKMF],[],
+   [AC_DEFUN([_AC_PATH_X_XMKMF],[AC_PATH_X_XMKMF])])
+
+dnl ------------------------------------------------------------------------
+dnl Find a file (or one of more files in a list of dirs)
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_FIND_FILE,
+[
+$3=NO
+for i in $2;
+do
+  for j in $1;
+  do
+    echo "configure: __oline__: $i/$j" >&AC_FD_CC
+    if test -r "$i/$j"; then
+      echo "taking that" >&AC_FD_CC
+      $3=$i
+      break 2
+    fi
+  done
+done
+])
+
+dnl KDE_FIND_PATH(programm-name, variable-name, list of directories,
+dnl	if-not-found, test-parameter)
+AC_DEFUN(KDE_FIND_PATH,
+[
+   AC_MSG_CHECKING([for $1])
+   if test -n "$$2"; then
+        kde_cv_path="$$2";
+   else
+        kde_cache=`echo $1 | sed 'y%./+-%__p_%'`
+
+        AC_CACHE_VAL(kde_cv_path_$kde_cache,
+        [
+        kde_cv_path="NONE"
+	dirs="$3"
+	kde_save_IFS=$IFS
+	IFS=':'
+	for dir in $PATH; do
+	  dirs="$dirs $dir"
+        done
+	IFS=$kde_save_IFS
+
+        for dir in $dirs; do
+	  if test -x "$dir/$1"; then
+	    if test -n "$5"
+	    then
+              evalstr="$dir/$1 $5 2>&1 "
+	      if eval $evalstr; then
+                kde_cv_path="$dir/$1"
+                break
+	      fi
+            else
+		kde_cv_path="$dir/$1"
+                break
+	    fi
+          fi
+        done
+
+        eval "kde_cv_path_$kde_cache=$kde_cv_path"
+
+        ])
+
+      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
+
+   fi
+
+   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
+      AC_MSG_RESULT(not found)
+      $4
+   else
+      AC_MSG_RESULT($kde_cv_path)
+      $2=$kde_cv_path
+
+   fi
+])
+
+AC_DEFUN(KDE_MOC_ERROR_MESSAGE,
+[
+    AC_MSG_ERROR([No Qt meta object compiler (moc) found!
+Please check whether you installed Qt correctly.
+You need to have a running moc binary.
+configure tried to run $ac_cv_path_moc and the test didn't
+succeed. If configure shouldn't have tried this one, set
+the environment variable MOC to the right one before running
+configure.
+])
+])
+
+AC_DEFUN(KDE_UIC_ERROR_MESSAGE,
+[
+    AC_MSG_WARN([No Qt ui compiler (uic) found!
+Please check whether you installed Qt correctly.
+You need to have a running uic binary.
+configure tried to run $ac_cv_path_uic and the test didn't
+succeed. If configure shouldn't have tried this one, set
+the environment variable UIC to the right one before running
+configure.
+])
+])
+
+dnl ------------------------------------------------------------------------
+dnl Find the meta object compiler and the ui compiler in the PATH,
+dnl in $QTDIR/bin, and some more usual places
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_PATH_QT_MOC_UIC,
+[
+   qt_bindirs=""
+   for dir in $kde_qt_dirs; do
+      qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc"
+   done
+   qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin"
+   if test ! "$ac_qt_bindir" = "NO"; then
+      qt_bindirs="$ac_qt_bindir $qt_bindirs"
+   fi
+
+   KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE])
+   if test -z "$UIC_NOT_NEEDED"; then
+     KDE_FIND_PATH(uic, UIC, [$qt_bindirs], [UIC=""])
+     if test -z "$UIC" ; then
+       KDE_UIC_ERROR_MESSAGE
+       exit 1
+     fi
+   else
+     UIC="echo uic not available: "
+   fi
+
+   AC_SUBST(MOC)
+   AC_SUBST(UIC)
+])
+
+AC_DEFUN(KDE_1_CHECK_PATHS,
+[
+  KDE_1_CHECK_PATH_HEADERS
+
+  KDE_TEST_RPATH=
+
+  if test -n "$USE_RPATH"; then
+
+     if test -n "$kde_libraries"; then
+       KDE_TEST_RPATH="-R $kde_libraries"
+     fi
+
+     if test -n "$qt_libraries"; then
+       KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
+     fi
+
+     if test -n "$x_libraries"; then
+       KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
+     fi
+
+     KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
+  fi
+
+AC_MSG_CHECKING([for KDE libraries installed])
+ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5'
+
+if AC_TRY_EVAL(ac_link) && test -s conftest; then
+  AC_MSG_RESULT(yes)
+else
+  AC_MSG_ERROR([your system fails at linking a small KDE application!
+Check, if your compiler is installed correctly and if you have used the
+same compiler to compile Qt and kdelibs as you did use now.
+For more details about this problem, look at the end of config.log.])
+fi
+
+if eval `KDEDIR= ./conftest 2>&5`; then
+  kde_result=done
+else
+  kde_result=problems
+fi
+
+KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
+kde_have_all_paths=yes
+
+KDE_SET_PATHS($kde_result)
+
+])
+
+AC_DEFUN(KDE_SET_PATHS,
+[
+  kde_cv_all_paths="kde_have_all_paths=\"yes\" \
+	kde_htmldir=\"$kde_htmldir\" \
+	kde_appsdir=\"$kde_appsdir\" \
+	kde_icondir=\"$kde_icondir\" \
+	kde_sounddir=\"$kde_sounddir\" \
+	kde_datadir=\"$kde_datadir\" \
+	kde_locale=\"$kde_locale\" \
+	kde_cgidir=\"$kde_cgidir\" \
+	kde_confdir=\"$kde_confdir\" \
+	kde_mimedir=\"$kde_mimedir\" \
+	kde_toolbardir=\"$kde_toolbardir\" \
+	kde_wallpaperdir=\"$kde_wallpaperdir\" \
+	kde_templatesdir=\"$kde_templatesdir\" \
+	kde_bindir=\"$kde_bindir\" \
+	kde_servicesdir=\"$kde_servicesdir\" \
+	kde_servicetypesdir=\"$kde_servicetypesdir\" \
+	kde_moduledir=\"$kde_moduledir\" \
+	kde_result=$1"
+])
+
+AC_DEFUN(KDE_SET_DEFAULT_PATHS,
+[
+if test "$1" = "default"; then
+
+  if test -z "$kde_htmldir"; then
+    kde_htmldir='\${prefix}/share/doc/HTML'
+  fi
+  if test -z "$kde_appsdir"; then
+    kde_appsdir='\${prefix}/share/applnk'
+  fi
+  if test -z "$kde_icondir"; then
+    kde_icondir='\${prefix}/share/icons'
+  fi
+  if test -z "$kde_sounddir"; then
+    kde_sounddir='\${prefix}/share/sounds'
+  fi
+  if test -z "$kde_datadir"; then
+    kde_datadir='\${prefix}/share/apps'
+  fi
+  if test -z "$kde_locale"; then
+    kde_locale='\${prefix}/share/locale'
+  fi
+  if test -z "$kde_cgidir"; then
+    kde_cgidir='\${exec_prefix}/cgi-bin'
+  fi
+  if test -z "$kde_confdir"; then
+    kde_confdir='\${prefix}/share/config'
+  fi
+  if test -z "$kde_mimedir"; then
+    kde_mimedir='\${prefix}/share/mimelnk'
+  fi
+  if test -z "$kde_toolbardir"; then
+    kde_toolbardir='\${prefix}/share/toolbar'
+  fi
+  if test -z "$kde_wallpaperdir"; then
+    kde_wallpaperdir='\${prefix}/share/wallpapers'
+  fi
+  if test -z "$kde_templatesdir"; then
+    kde_templatesdir='\${prefix}/share/templates'
+  fi
+  if test -z "$kde_bindir"; then
+    kde_bindir='\${exec_prefix}/bin'
+  fi
+  if test -z "$kde_servicesdir"; then
+    kde_servicesdir='\${prefix}/share/services'
+  fi
+  if test -z "$kde_servicetypesdir"; then
+    kde_servicetypesdir='\${prefix}/share/servicetypes'
+  fi
+  if test -z "$kde_moduledir"; then
+    kde_moduledir='\${exec_prefix}/lib/kde2'
+  fi
+
+  KDE_SET_PATHS(defaults)
+
+else
+
+  if test $kde_qtver = 1; then
+     AC_MSG_RESULT([compiling])
+     KDE_1_CHECK_PATHS
+  else
+     AC_MSG_ERROR([path checking not yet supported for KDE 2])
+  fi
+
+fi
+])
+
+AC_DEFUN(KDE_CHECK_PATHS_FOR_COMPLETENESS,
+[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
+   test -z "$kde_icondir" || test -z "$kde_sounddir" ||
+   test -z "$kde_datadir" || test -z "$kde_locale"  ||
+   test -z "$kde_cgidir"  || test -z "$kde_confdir" ||
+   test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
+   test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
+   test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
+   test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
+   test "$kde_have_all_paths" != "yes"; then
+     kde_have_all_paths=no
+  fi
+])
+
+AC_DEFUN(KDE_MISSING_PROG_ERROR,
+[
+    AC_MSG_ERROR([The important program $1 was not found!
+Please check whether you installed KDE correctly.
+])
+])
+
+AC_DEFUN(KDE_SUBST_PROGRAMS,
+[
+
+        kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde2/bin /usr/kde/bin /usr/local/kde/bin"
+        if test -n "$KDEDIRS"; then
+           kde_save_IFS=$IFS
+           IFS=:
+           for dir in $KDEDIRS; do
+                kde_default_bindirs="$dir/bin $kde_default_bindirs "
+           done
+           IFS=$kde_save_IFS
+        fi
+        kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs"
+        KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)])
+        KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)])
+        KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(mcopidl)])
+        KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(artsc-config)])
+        KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs])
+        KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs])
+      
+        if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then  
+ 	    kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde2/share /opt/kde/share $prefix/share"
+            test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs"
+            AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET)
+	    if test "$KDE_XSL_STYLESHEET" = "NO"; then
+		KDE_XSL_STYLESHEET=""
+	    else
+                KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl"
+	    fi
+        fi
+
+        DCOP_DEPENDENCIES='$(DCOPIDL)'
+        AC_SUBST(DCOPIDL)
+        AC_SUBST(DCOPIDL2CPP)
+        AC_SUBST(DCOP_DEPENDENCIES)
+        AC_SUBST(MCOPIDL)
+        AC_SUBST(ARTSCCONFIG)
+        AC_SUBST(KDECONFIG)
+	AC_SUBST(MEINPROC)
+ 	AC_SUBST(KDE_XSL_STYLESHEET)
+
+        if test -x "$KDECONFIG"; then # it can be "compiled"
+          kde_libs_prefix=`$KDECONFIG --prefix`
+          if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then
+               AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs.
+                          This means it has been moved since you installed it.
+                          This won't work. Please recompile kdelibs for the new prefix.
+                          ])
+           fi
+           kde_libs_htmldir=`$KDECONFIG --install html --expandvars`
+        else
+           kde_libs_prefix='$(prefix)'
+           kde_libs_htmldir='$(kde_htmldir)'
+        fi
+        AC_SUBST(kde_libs_prefix)
+        AC_SUBST(kde_libs_htmldir)
+])dnl
+
+AC_DEFUN(AC_CREATE_KFSSTND,
+[
+AC_REQUIRE([AC_CHECK_RPATH])
+
+AC_MSG_CHECKING([for KDE paths])
+kde_result=""
+kde_cached_paths=yes
+AC_CACHE_VAL(kde_cv_all_paths,
+[
+  KDE_SET_DEFAULT_PATHS($1)
+  kde_cached_paths=no
+])
+eval "$kde_cv_all_paths"
+KDE_CHECK_PATHS_FOR_COMPLETENESS
+if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then
+  # wrong values were cached, may be, we can set better ones
+  kde_result=
+  kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir=
+  kde_datadir= kde_locale=  kde_cgidir=  kde_confdir=
+  kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir=
+  kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir=
+  kde_have_all_paths=
+  KDE_SET_DEFAULT_PATHS($1)
+  eval "$kde_cv_all_paths"
+  KDE_CHECK_PATHS_FOR_COMPLETENESS
+  kde_result="$kde_result (cache overridden)"
+fi
+if test "$kde_have_all_paths" = "no"; then
+  AC_MSG_ERROR([configure could not run a little KDE program to test the environment.
+Since it had compiled and linked before, it must be a strange problem on your system.
+Look at config.log for details. If you are not able to fix this, look at
+http://www.kde.org/faq/installation.html or any www.kde.org mirror.
+(If you're using an egcs version on Linux, you may update binutils!)
+])
+else
+  rm -f conftest*
+  AC_MSG_RESULT($kde_result)
+fi
+
+bindir=$kde_bindir
+
+KDE_SUBST_PROGRAMS
+
+])
+
+AC_DEFUN(AC_SUBST_KFSSTND,
+[
+AC_SUBST(kde_htmldir)
+AC_SUBST(kde_appsdir)
+AC_SUBST(kde_icondir)
+AC_SUBST(kde_sounddir)
+AC_SUBST(kde_datadir)
+AC_SUBST(kde_locale)
+AC_SUBST(kde_confdir)
+AC_SUBST(kde_mimedir)
+AC_SUBST(kde_wallpaperdir)
+AC_SUBST(kde_bindir)
+dnl for KDE 2
+AC_SUBST(kde_templatesdir)
+AC_SUBST(kde_servicesdir)
+AC_SUBST(kde_servicetypesdir)
+AC_SUBST(kde_moduledir)
+if test "$kde_qtver" = 1; then
+  kde_minidir="$kde_icondir/mini"
+else
+# for KDE 1 - this breaks KDE2 apps using minidir, but
+# that's the plan ;-/
+  kde_minidir="/dev/null"
+fi
+dnl AC_SUBST(kde_minidir)
+dnl AC_SUBST(kde_cgidir)
+dnl AC_SUBST(kde_toolbardir)
+])
+
+AC_DEFUN(KDE_MISC_TESTS,
+[
+   AC_LANG_C
+   dnl Checks for libraries.
+   AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD 
+   AC_SUBST(LIBUTIL)
+   AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD
+   AC_SUBST(LIBCOMPAT)
+   kde_have_crypt=
+   AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes],
+      AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [
+        AC_MSG_WARN([you have no crypt in either libcrypt or libc.
+You should install libcrypt from another source or configure with PAM
+support])
+	kde_have_crypt=no
+      ]))
+   AC_SUBST(LIBCRYPT)
+   if test $kde_have_crypt = yes; then
+      AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function])
+   fi
+   AC_CHECK_SOCKLEN_T
+   AC_LANG_C
+   AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"])
+   if test $ac_cv_lib_dnet_dnet_ntoa = no; then
+      AC_CHECK_LIB(dnet_stub, dnet_ntoa,
+        [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"])
+   fi
+   AC_CHECK_FUNC(inet_ntoa)
+   if test $ac_cv_func_inet_ntoa = no; then
+     AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl")
+   fi
+   AC_CHECK_FUNC(connect)
+   if test $ac_cv_func_connect = no; then
+      AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", ,
+        $X_EXTRA_LIBS)
+   fi
+
+   AC_CHECK_FUNC(remove)
+   if test $ac_cv_func_remove = no; then
+      AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix")
+   fi
+
+   # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
+   AC_CHECK_FUNC(shmat, ,
+     AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"))
+   
+   # Solaris 2.6 and others need -lresolv for res_init
+   AC_CHECK_FUNCS(res_init, , [
+     kde_libs_safe="$LIBS"
+     LIBS="$LIBS $X_EXTRA_LIBS -lresolv"
+     AC_TRY_LINK(
+[
+#include <resolv.h>
+],
+[ 
+res_init(); 
+],
+        LIBRESOLV="-lresolv"
+        X_EXTRA_LIBS="$X_EXTRA_LIBS $LIBRESOLV"
+        AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function])
+     )
+     LIBS=$kde_libs_safe
+   ])
+
+   LIBSOCKET="$X_EXTRA_LIBS"
+   AC_SUBST(LIBSOCKET)
+   AC_SUBST(LIBRESOLV)
+   AC_SUBST(X_EXTRA_LIBS)
+   AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4
+   AC_SUBST(LIBUCB)
+
+   case $host in  dnl this *is* LynxOS specific
+   *-*-lynxos* )
+        AC_MSG_CHECKING([LynxOS header file wrappers])
+        [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"]
+        AC_MSG_RESULT(disabled)
+        AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS
+         ;;
+    esac
+
+   KDE_CHECK_TYPES
+   KDE_CHECK_LIBDL
+])
+
+dnl ------------------------------------------------------------------------
+dnl Find the header files and libraries for X-Windows. Extended the
+dnl macro AC_PATH_X
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(K_PATH_X,
+[
+AC_REQUIRE([AC_PROG_CPP])dnl
+AC_REQUIRE([KDE_MISC_TESTS])dnl
+AC_MSG_CHECKING(for X)
+AC_LANG_SAVE
+AC_LANG_C
+AC_CACHE_VAL(kde_cv_have_x,
+[# One or both of the vars are not set, and there is no cached value.
+if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then
+   kde_x_includes=NO
+else
+   kde_x_includes=$x_includes
+fi
+if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then
+   kde_x_libraries=NO
+else
+   kde_x_libraries=$x_libraries
+fi
+
+# below we use the standard autoconf calls
+ac_x_libraries=$kde_x_libraries
+ac_x_includes=$kde_x_includes
+
+_AC_PATH_X_DIRECT
+dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries.
+dnl Unfortunately, if compiling with the N32 ABI, this is not the correct
+dnl location. The correct location is /usr/lib32 or an undefined value
+dnl (the linker is smart enough to pick the correct default library).
+dnl Things work just fine if you use just AC_PATH_X_DIRECT.
+dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to
+dnl /usr/openwin/include, which doesn't work. /usr/include does work, so
+dnl x_includes should be left alone.
+case "$host" in
+mips-sgi-irix6*)
+  ;;
+*-*-solaris*)
+  ;;
+*)
+  _AC_PATH_X_XMKMF
+  if test -z "$ac_x_includes"; then
+    ac_x_includes="."
+  fi
+  if test -z "$ac_x_libraries"; then
+    ac_x_libraries="/usr/lib"
+  fi
+esac
+#from now on we use our own again
+
+# when the user already gave --x-includes, we ignore
+# what the standard autoconf macros told us.
+if test "$kde_x_includes" = NO; then
+  kde_x_includes=$ac_x_includes
+fi
+
+# for --x-libraries too
+if test "$kde_x_libraries" = NO; then
+  kde_x_libraries=$ac_x_libraries
+fi
+
+if test "$kde_x_includes" = NO; then
+  AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!])
+fi
+
+if test "$kde_x_libraries" = NO; then
+  AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!])
+fi
+
+# Record where we found X for the cache.
+kde_cv_have_x="have_x=yes \
+         kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries"
+])dnl
+
+eval "$kde_cv_have_x"
+
+if test "$have_x" != yes; then
+  AC_MSG_RESULT($have_x)
+  no_x=yes
+else
+  AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes])
+fi
+
+if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then
+  X_INCLUDES=""
+  x_includes="."; dnl better than nothing :-
+ else
+  x_includes=$kde_x_includes
+  X_INCLUDES="-I$x_includes"
+fi
+
+if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then
+  X_LDFLAGS=""
+  x_libraries="/usr/lib"; dnl better than nothing :-
+ else
+  x_libraries=$kde_x_libraries
+  X_LDFLAGS="-L$x_libraries"
+fi
+all_includes="$X_INCLUDES"
+all_libraries="$X_LDFLAGS"
+
+AC_SUBST(X_INCLUDES)
+AC_SUBST(X_LDFLAGS)
+AC_SUBST(x_libraries)
+AC_SUBST(x_includes)
+
+# Check for libraries that X11R6 Xt/Xaw programs need.
+ac_save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS $X_LDFLAGS"
+# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
+# check for ICE first), but we must link in the order -lSM -lICE or
+# we get undefined symbols.  So assume we have SM if we have ICE.
+# These have to be linked with before -lX11, unlike the other
+# libraries we check for below, so use a different variable.
+#  --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
+AC_CHECK_LIB(ICE, IceConnectionNumber,
+  [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS)
+AC_SUBST(LIBSM)
+LDFLAGS="$ac_save_LDFLAGS"
+
+AC_SUBST(X_PRE_LIBS)
+
+LIB_X11='-lX11 $(LIBSOCKET)'
+AC_SUBST(LIB_X11)
+
+AC_MSG_CHECKING(for libXext)
+AC_CACHE_VAL(kde_cv_have_libXext,
+[
+kde_ldflags_safe="$LDFLAGS"
+kde_libs_safe="$LIBS"
+
+LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
+LIBS="-lXext -lX11 $LIBSOCKET"
+
+AC_TRY_LINK([
+#include <stdio.h>
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+#endif
+],
+[
+printf("hello Xext\n");
+],
+kde_cv_have_libXext=yes,
+kde_cv_have_libXext=no
+   )
+
+LDFLAGS=$kde_ldflags_safe
+LIBS=$kde_libs_safe
+ ])
+
+AC_MSG_RESULT($kde_cv_have_libXext)
+
+if test "$kde_cv_have_libXext" = "no"; then
+  AC_MSG_ERROR([We need a working libXext to proceed. Since configure
+can't find it itself, we stop here assuming that make wouldn't find
+them either.])
+fi
+
+AC_MSG_CHECKING(for Xinerama)
+
+ AC_ARG_WITH(xinerama,
+  [  --with-xinerama        enable support for Xinerama ],
+  [
+    no_xinerama=no
+  ], [
+    no_xinerama=yes
+  ]
+)
+
+kde_save_LDFLAGS="$LDFLAGS"
+kde_save_CFLAGS="$CFLAGS"
+kde_save_LIBS="$LIBS"
+LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
+CFLAGS="$CFLAGS -I$x_includes"
+LIBS="-lXinerama -lXext"
+
+if test "x$no_xinerama" = "xno"; then
+
+  AC_CACHE_VAL(ac_cv_have_xinerama,
+  [
+	  AC_TRY_LINK([#include <X11/Xlib.h>
+  			#include <X11/extensions/Xinerama.h>],
+	  	  [XineramaIsActive(NULL);],
+		  [ac_cv_have_xinerama="yes"],
+		  [ac_cv_have_xinerama="no"])
+  ])
+else
+  ac_cv_have_xinerama=no;
+fi
+
+AC_MSG_RESULT($ac_cv_have_xinerama)
+
+LIBXINERAMA=""
+
+if test "$ac_cv_have_xinerama" = "yes"; then
+  AC_DEFINE(HAVE_XINERAMA, 1, [Define if you want Xinerama support])
+  LIBXINERAMA="-lXinerama"
+fi
+
+AC_SUBST(LIBXINERAMA)
+
+LDFLAGS="$kde_save_LDFLAGS"
+CFLAGS="$kde_save_CFLAGS"
+LIBS="$kde_save_LIBS"
+
+AC_LANG_RESTORE
+
+])
+
+AC_DEFUN(KDE_PRINT_QT_PROGRAM,
+[
+AC_REQUIRE([KDE_USE_QT])
+cat > conftest.$ac_ext <<EOF
+#include "confdefs.h"
+#include <qglobal.h>
+#include <qapplication.h>
+EOF
+if test "$kde_qtver" = "2"; then
+cat >> conftest.$ac_ext <<EOF
+#include <qevent.h>
+#include <qstring.h>
+#include <qstyle.h>
+EOF
+
+if test $kde_qtsubver -gt 0; then
+cat >> conftest.$ac_ext <<EOF
+#include <qiconview.h>
+EOF
+fi
+
+fi
+
+echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
+cat >> conftest.$ac_ext <<EOF
+#error 1
+#endif
+
+int main() {
+EOF
+if test "$kde_qtver" = "2"; then
+cat >> conftest.$ac_ext <<EOF
+    QStringList *t = new QStringList();
+EOF
+if test $kde_qtsubver -gt 0; then
+cat >> conftest.$ac_ext <<EOF
+    QIconView iv(0);
+    iv.setWordWrapIconText(false);
+    QString s;
+    s.setLatin1("Elvis is alive", 14);
+    int magnolia = QEvent::Speech; /* new in 2.2 beta2 */
+EOF
+fi
+fi
+cat >> conftest.$ac_ext <<EOF
+    return 0;
+}
+EOF
+])
+
+AC_DEFUN(KDE_USE_QT,
+[
+
+if test -z "$1"; then
+  kde_qtver=2
+  kde_qtsubver=1
+else
+  kde_qtsubver=`echo "$1" | sed -e 's#[0-9]\+\.\([0-9]\+\).*#\1#'`
+  # following is the check if subversion isn´t found in passed argument
+  if test "$kde_qtsubver" = "$1"; then
+    kde_qtsubver=1
+  fi
+  kde_qtver=`echo "$1" | sed -e 's#^\([0-9]\+\)\..*#\1#'`
+  if test "$kde_qtver" = "1"; then
+    kde_qtsubver=42
+  else
+   # this is the version number fallback to 2.1, unless major version is 1 or 2
+   if test "$kde_qtver" != "2"; then
+    kde_qtver=2
+    kde_qtsubver=1
+   fi
+  fi
+fi
+
+if test -z "$2"; then
+  if test $kde_qtver = 2; then
+    if test $kde_qtsubver -gt 0; then
+      kde_qt_minversion=">= Qt 2.2.2"
+    else
+      kde_qt_minversion=">= Qt 2.0.2"
+    fi
+  else
+    kde_qt_minversion=">= 1.42 and < 2.0"
+  fi
+else
+   kde_qt_minversion=$2
+fi
+
+if test -z "$3"; then
+   if test $kde_qtver = 2; then
+    if test $kde_qtsubver -gt 0; then
+      kde_qt_verstring="QT_VERSION >= 222"
+    else
+      kde_qt_verstring="QT_VERSION >= 200"
+    fi
+   else
+    kde_qt_verstring="QT_VERSION >= 142 && QT_VERSION < 200"
+  fi
+else
+   kde_qt_verstring=$3
+fi
+
+if test $kde_qtver = 2; then
+   kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt"
+else
+   kde_qt_dirs="$QTDIR /usr/lib/qt"
+fi
+])
+
+AC_DEFUN(KDE_CHECK_QT_DIRECT,
+[
+AC_REQUIRE([KDE_USE_QT])
+AC_MSG_CHECKING([if Qt compiles without flags])
+AC_CACHE_VAL(kde_cv_qt_direct,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH
+ac_LIBRARY_PATH="$LIBRARY_PATH"
+ac_cxxflags_safe="$CXXFLAGS"
+ac_ldflags_safe="$LDFLAGS"
+ac_libs_safe="$LIBS"
+
+CXXFLAGS="$CXXFLAGS -I$qt_includes"
+LDFLAGS="$LDFLAGS $X_LDFLAGS"
+LIBS="$LIBQT -lXext -lX11 $LIBSOCKET"
+LD_LIBRARY_PATH=
+export LD_LIBRARY_PATH
+LIBRARY_PATH=
+export LIBRARY_PATH
+
+KDE_PRINT_QT_PROGRAM
+
+if AC_TRY_EVAL(ac_link) && test -s conftest; then
+  kde_cv_qt_direct="yes"
+else
+  kde_cv_qt_direct="no"
+  echo "configure: failed program was:" >&AC_FD_CC
+  cat conftest.$ac_ext >&AC_FD_CC
+fi
+
+rm -f conftest*
+CXXFLAGS="$ac_cxxflags_safe"
+LDFLAGS="$ac_ldflags_safe"
+LIBS="$ac_libs_safe"
+
+LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe"
+export LD_LIBRARY_PATH
+LIBRARY_PATH="$ac_LIBRARY_PATH"
+export LIBRARY_PATH
+AC_LANG_RESTORE
+])
+
+if test "$kde_cv_qt_direct" = "yes"; then
+  AC_MSG_RESULT(yes)
+  $1
+else
+  AC_MSG_RESULT(no)
+  $2
+fi
+])
+
+dnl ------------------------------------------------------------------------
+dnl Try to find the Qt headers and libraries.
+dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed)
+dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed)
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_PATH_QT_1_3,
+[
+AC_REQUIRE([K_PATH_X])
+AC_REQUIRE([KDE_USE_QT])
+
+dnl ------------------------------------------------------------------------
+dnl Add configure flag to enable linking to MT version of Qt library.
+dnl ------------------------------------------------------------------------
+
+AC_ARG_ENABLE(
+  mt,
+  [  --enable-mt             link to threaded Qt (experimental)],
+  kde_use_qt_mt=$enableval,
+  kde_use_qt_mt=no
+)
+
+USING_QT_MT=""
+
+dnl ------------------------------------------------------------------------
+dnl If we got --enable-qt-mt then adjust some vars for the host.
+dnl ------------------------------------------------------------------------
+
+if test "x$kde_use_qt_mt" = "xyes"; then
+
+  case $host in
+  *-*-linux-*)
+    if test "x$GCC" = "xyes"; then
+      CPPFLAGS="$CPPFLAGS -DQT_THREAD_SUPPORT -pthread"
+      X_EXTRA_LIBS="$X_EXTRA_LIBS -pthread"
+    else
+      AC_MSG_WARN([Compiler is not gcc. MT support disabled.])
+    fi
+    ;;
+  *)
+    AC_MSG_WARN([MT not yet supported on $host - disabled.])
+    ;;
+  esac
+
+fi
+
+kde_qt_was_given=yes
+
+dnl ------------------------------------------------------------------------
+dnl If we haven't been told how to link to Qt, we work it out for ourselves.
+dnl ------------------------------------------------------------------------
+
+if test -z "$LIBQT_GLOB"; then
+
+  LIBQT_GLOB="libqt.*"
+
+fi
+
+if test -z "$LIBQT"; then
+
+  LIBQT="-lqt"
+  kde_int_qt="-lqt"
+
+dnl ------------------------------------------------------------------------
+dnl If we got --enable-qt-mt then adjust the Qt library name for the host.
+dnl ------------------------------------------------------------------------
+
+  if test "x$kde_use_qt_mt" = "xyes"; then
+
+      case $host in
+      *-*-linux-*)
+        if test "x$GCC" = "xyes"; then
+          LIBQT="-lqt-mt"
+          kde_int_qt="-lqt-mt"
+          LIBQT_GLOB="libqt-mt.*"
+          USING_QT_MT="using -mt"
+        fi
+      ;;
+      esac
+  fi
+
+  kde_qt_was_given=no
+
+else
+  kde_int_qt="$LIBQT"
+fi
+
+if test $kde_qtver = 2; then
+
+  AC_REQUIRE([AC_FIND_PNG])
+  AC_REQUIRE([AC_FIND_JPEG])
+  LIBQT="$LIBQT $LIBPNG $LIBJPEG"
+fi
+
+AC_MSG_CHECKING([for Qt])
+
+LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET"
+ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO
+qt_libraries=""
+qt_includes=""
+AC_ARG_WITH(qt-dir,
+    [  --with-qt-dir=DIR       where the root of Qt is installed ],
+    [  ac_qt_includes="$withval"/include
+       ac_qt_libraries="$withval"/lib
+       ac_qt_bindir="$withval"/bin
+    ])
+
+AC_ARG_WITH(qt-includes,
+    [  --with-qt-includes=DIR  where the Qt includes are. ],
+    [
+       ac_qt_includes="$withval"
+    ])
+
+kde_qt_libs_given=no
+
+AC_ARG_WITH(qt-libraries,
+    [  --with-qt-libraries=DIR where the Qt library is installed.],
+    [  ac_qt_libraries="$withval"
+       kde_qt_libs_given=yes
+    ])
+
+AC_CACHE_VAL(ac_cv_have_qt,
+[#try to guess Qt locations
+
+qt_incdirs=""
+for dir in $kde_qt_dirs; do
+   qt_incdirs="$qt_incdirs $dir/include $dir"
+done
+qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 $x_includes"
+if test ! "$ac_qt_includes" = "NO"; then
+   qt_incdirs="$ac_qt_includes $qt_incdirs"
+fi
+
+if test "$kde_qtver" = "2"; then
+  kde_qt_header=qstyle.h
+else
+  kde_qt_header=qglobal.h
+fi
+
+AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir)
+ac_qt_includes="$qt_incdir"
+
+qt_libdirs=""
+for dir in $kde_qt_dirs; do
+   qt_libdirs="$qt_libdirs $dir/lib $dir"
+done
+qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries"
+if test ! "$ac_qt_libraries" = "NO"; then
+  qt_libdir=$ac_qt_libraries
+else
+  qt_libdirs="$ac_qt_libraries $qt_libdirs"
+  # if the Qt was given, the chance is too big that libqt.* doesn't exist
+  qt_libdir=NONE
+  for dir in $qt_libdirs; do
+    try="ls -1 $dir/${LIBQT_GLOB}"
+    if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi
+  done
+fi
+
+ac_qt_libraries="$qt_libdir"
+
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+
+ac_cxxflags_safe="$CXXFLAGS"
+ac_ldflags_safe="$LDFLAGS"
+ac_libs_safe="$LIBS"
+
+CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
+LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS"
+LIBS="$LIBS $LIBQT"
+
+KDE_PRINT_QT_PROGRAM
+
+if AC_TRY_EVAL(ac_link) && test -s conftest; then
+  rm -f conftest*
+else
+  echo "configure: failed program was:" >&AC_FD_CC
+  cat conftest.$ac_ext >&AC_FD_CC
+  ac_qt_libraries="NO"
+fi
+rm -f conftest*
+CXXFLAGS="$ac_cxxflags_safe"
+LDFLAGS="$ac_ldflags_safe"
+LIBS="$ac_libs_safe"
+
+AC_LANG_RESTORE
+if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then
+  ac_cv_have_qt="have_qt=no"
+  ac_qt_notfound=""
+  if test "$ac_qt_includes" = NO; then
+    if test "$ac_qt_libraries" = NO; then
+      ac_qt_notfound="(headers and libraries)";
+    else
+      ac_qt_notfound="(headers)";
+    fi
+  else
+    ac_qt_notfound="(libraries)";
+  fi
+
+  AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation!
+For more details about this problem, look at the end of config.log.])
+else
+  have_qt="yes"
+fi
+])
+
+eval "$ac_cv_have_qt"
+
+if test "$have_qt" != yes; then
+  AC_MSG_RESULT([$have_qt]);
+else
+  ac_cv_have_qt="have_qt=yes \
+    ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries"
+  AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT])
+
+  qt_libraries="$ac_qt_libraries"
+  qt_includes="$ac_qt_includes"
+fi
+
+if test ! "$kde_qt_libs_given" = "yes"; then
+KDE_CHECK_QT_DIRECT(qt_libraries= ,[])
+fi
+
+AC_SUBST(qt_libraries)
+AC_SUBST(qt_includes)
+
+if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then
+ QT_INCLUDES="";
+else
+ QT_INCLUDES="-I$qt_includes"
+ all_includes="$QT_INCLUDES $all_includes"
+fi
+
+if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then
+ QT_LDFLAGS=""
+else
+ QT_LDFLAGS="-L$qt_libraries"
+ all_libraries="$all_libraries $QT_LDFLAGS"
+fi
+
+AC_SUBST(QT_INCLUDES)
+AC_SUBST(QT_LDFLAGS)
+AC_PATH_QT_MOC_UIC
+
+LIB_QT="$kde_int_qt "'$(LIBPNG) $(LIBJPEG) -lXext $(LIB_X11) $(LIBSM)'
+AC_SUBST(LIB_QT)
+
+])
+
+AC_DEFUN(AC_PATH_QT,
+[
+AC_PATH_QT_1_3
+])
+
+AC_DEFUN(KDE_CHECK_FINAL,
+[
+  AC_ARG_ENABLE(final, [  --enable-final          build size optimized apps (experimental - needs lots of memory)],
+	kde_use_final=$enableval, kde_use_final=no)
+
+  KDE_COMPILER_REPO
+  if test "x$kde_use_final" = "xyes"; then
+      KDE_USE_FINAL_TRUE=""
+      KDE_USE_FINAL_FALSE="#"
+   else
+      KDE_USE_FINAL_TRUE="#"
+      KDE_USE_FINAL_FALSE=""
+  fi
+  AC_SUBST(KDE_USE_FINAL_TRUE)
+  AC_SUBST(KDE_USE_FINAL_FALSE)
+
+  AC_ARG_ENABLE(closure, [  --disable-closure       don't delay template instantiation],
+  	kde_use_closure=$enableval, kde_use_closure=yes)
+
+  if test "x$kde_use_closure" = "xyes"; then
+       KDE_USE_CLOSURE_TRUE=""
+       KDE_USE_CLOSURE_FALSE="#"
+#       CXXFLAGS="$CXXFLAGS $REPO"
+  else
+       KDE_USE_CLOSURE_TRUE="#"
+       KDE_USE_CLOSURE_FALSE=""
+  fi
+  AC_SUBST(KDE_USE_CLOSURE_TRUE)
+  AC_SUBST(KDE_USE_CLOSURE_FALSE)
+])
+
+dnl ------------------------------------------------------------------------
+dnl Now, the same with KDE
+dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed)
+dnl and $(kde_includes) will be the kdehdrlocation (if needed)
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_BASE_PATH_KDE,
+[
+AC_PREREQ([2.13])
+AC_REQUIRE([AC_PATH_QT])dnl
+AC_CHECK_RPATH
+AC_MSG_CHECKING([for KDE])
+
+if test "${prefix}" != NONE; then
+  kde_includes=${prefix}/include
+  ac_kde_includes=$prefix/include
+
+  if test "${exec_prefix}" != NONE; then
+    kde_libraries=${exec_prefix}/lib
+    ac_kde_libraries=$exec_prefix/lib
+  else
+    kde_libraries=${prefix}/lib
+    ac_kde_libraries=$prefix/lib
+  fi
+else
+  ac_kde_includes=
+  ac_kde_libraries=
+  kde_libraries=""
+  kde_includes=""
+fi
+
+AC_CACHE_VAL(ac_cv_have_kde,
+[#try to guess kde locations
+
+if test "$kde_qtver" = 1; then
+  kde_check_header="ksock.h"
+  kde_check_lib="libkdecore.la"
+else
+  kde_check_header="ksharedptr.h"
+  kde_check_lib="libkio.la"
+fi
+
+if test -z "$1"; then
+
+kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde2/include /opt/kde/include $x_includes $qt_includes"
+test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs"
+kde_incdirs="$ac_kde_includes $kde_incdirs"
+AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir)
+ac_kde_includes="$kde_incdir"
+
+if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then
+  AC_MSG_ERROR([
+in the prefix, you've chosen, are no KDE headers installed. This will fail.
+So, check this please and use another prefix!])
+fi
+
+kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib /usr/X11R6/lib /usr/local/lib /opt/kde2/lib /opt/kde/lib /usr/X11R6/kde/lib"
+test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib $KDEDIR $kde_libdirs"
+kde_libdirs="$ac_kde_libraries $kde_libdirs"
+AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir)
+ac_kde_libraries="$kde_libdir"
+
+if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then
+AC_MSG_ERROR([
+in the prefix, you've chosen, are no KDE libraries installed. This will fail.
+So, check this please and use another prefix!])
+fi
+ac_kde_libraries="$kde_libdir"
+
+if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO; then
+  ac_cv_have_kde="have_kde=no"
+else
+  ac_cv_have_kde="have_kde=yes \
+    ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
+fi
+
+else dnl test -z $1
+
+  ac_cv_have_kde="have_kde=no"
+
+fi
+])dnl
+
+eval "$ac_cv_have_kde"
+
+if test "$have_kde" != "yes"; then
+ if test "${prefix}" = NONE; then
+  ac_kde_prefix="$ac_default_prefix"
+ else
+  ac_kde_prefix="$prefix"
+ fi
+ if test "$exec_prefix" = NONE; then
+  ac_kde_exec_prefix="$ac_kde_prefix"
+  AC_MSG_RESULT([will be installed in $ac_kde_prefix])
+ else
+  ac_kde_exec_prefix="$exec_prefix"
+  AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix])
+ fi
+
+ kde_libraries="${ac_kde_exec_prefix}/lib"
+ kde_includes=${ac_kde_prefix}/include
+
+else
+  ac_cv_have_kde="have_kde=yes \
+    ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
+  AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes])
+
+  kde_libraries="$ac_kde_libraries"
+  kde_includes="$ac_kde_includes"
+fi
+AC_SUBST(kde_libraries)
+AC_SUBST(kde_includes)
+
+if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes"  || test "$kde_includes" = "/usr/include"; then
+ KDE_INCLUDES=""
+else
+ KDE_INCLUDES="-I$kde_includes"
+ all_includes="$KDE_INCLUDES $all_includes"
+fi
+ 
+KDE_LDFLAGS="-L$kde_libraries"
+if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then 
+ all_libraries="$all_libraries $KDE_LDFLAGS"
+fi
+
+AC_SUBST(KDE_LDFLAGS)
+AC_SUBST(KDE_INCLUDES)
+
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+all_libraries="$all_libraries $USER_LDFLAGS"
+all_includes="$all_includes $USER_INCLUDES"
+AC_SUBST(all_includes)
+AC_SUBST(all_libraries)
+
+AC_SUBST(AUTODIRS)
+])
+
+AC_DEFUN(KDE_CHECK_EXTRA_LIBS,
+[
+AC_MSG_CHECKING(for extra includes)
+AC_ARG_WITH(extra-includes, [  --with-extra-includes=DIR
+                          adds non standard include paths],
+  kde_use_extra_includes="$withval",
+  kde_use_extra_includes=NONE
+)
+kde_extra_includes=
+if test -n "$kde_use_extra_includes" && \
+   test "$kde_use_extra_includes" != "NONE"; then
+
+   ac_save_ifs=$IFS
+   IFS=':'
+   for dir in $kde_use_extra_includes; do
+     kde_extra_includes="$kde_extra_includes $dir"
+     USER_INCLUDES="$USER_INCLUDES -I$dir"
+   done
+   IFS=$ac_save_ifs
+   kde_use_extra_includes="added"
+else
+   kde_use_extra_includes="no"
+fi
+AC_SUBST(USER_INCLUDES)
+
+AC_MSG_RESULT($kde_use_extra_includes)
+
+kde_extra_libs=
+AC_MSG_CHECKING(for extra libs)
+AC_ARG_WITH(extra-libs, [  --with-extra-libs=DIR   adds non standard library paths],
+  kde_use_extra_libs=$withval,
+  kde_use_extra_libs=NONE
+)
+if test -n "$kde_use_extra_libs" && \
+   test "$kde_use_extra_libs" != "NONE"; then
+
+   ac_save_ifs=$IFS
+   IFS=':'
+   for dir in $kde_use_extra_libs; do
+     kde_extra_libs="$kde_extra_libs $dir"
+     KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir"
+     USER_LDFLAGS="$USER_LDFLAGS -L$dir"
+   done
+   IFS=$ac_save_ifs
+   kde_use_extra_libs="added"
+else
+   kde_use_extra_libs="no"
+fi
+
+AC_SUBST(USER_LDFLAGS)
+
+AC_MSG_RESULT($kde_use_extra_libs)
+
+])
+
+AC_DEFUN(KDE_1_CHECK_PATH_HEADERS,
+[
+    AC_MSG_CHECKING([for KDE headers installed])
+    AC_LANG_SAVE
+    AC_LANG_CPLUSPLUS
+cat > conftest.$ac_ext <<EOF
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+#endif
+#include <stdio.h>
+#include "confdefs.h"
+#include <kapp.h>
+
+int main() {
+    printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data());
+    printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data());
+    printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data());
+    printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data());
+    printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data());
+    printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data());
+    printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data());
+    printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data());
+    printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data());
+    printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data());
+    printf("kde_wallpaperdir=\\"%s\\"\n",
+	KApplication::kde_wallpaperdir().data());
+    printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data());
+    printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data());
+    printf("kde_servicesdir=\\"/tmp/dummy\\"\n");
+    printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n");
+    printf("kde_moduledir=\\"/tmp/dummy\\"\n");
+    return 0;
+    }
+EOF
+
+ ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext'
+ if AC_TRY_EVAL(ac_compile); then
+   AC_MSG_RESULT(yes)
+ else
+   AC_MSG_ERROR([your system is not able to compile a small KDE application!
+Check, if you installed the KDE header files correctly.
+For more details about this problem, look at the end of config.log.])
+  fi
+
+  AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_CHECK_KDEQTADDON,
+[
+AC_MSG_CHECKING(for kde-qt-addon)
+AC_CACHE_VAL(kde_cv_have_kdeqtaddon,
+[
+ kde_ldflags_safe="$LDFLAGS"
+ kde_libs_safe="$LIBS"
+ kde_cxxflags_safe="$CXXFLAGS"
+
+ LIBS="-lkde-qt-addon $LIBQT $LIBS"
+ CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes"
+ LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS"
+
+ AC_TRY_LINK([
+   #include <qdom.h>
+ ],
+ [
+   QDomDocument doc;
+ ],
+  kde_cv_have_kdeqtaddon=yes,
+  kde_cv_have_kdeqtaddon=no
+ )
+
+ LDFLAGS=$kde_ldflags_safe
+ LIBS=$kde_libs_safe
+ kde_cxxflags_safe="$CXXFLAGS"
+])
+
+AC_MSG_RESULT($kde_cv_have_kdeqtaddon)
+
+if test "$kde_cv_have_kdeqtaddon" = "no"; then
+  AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first.
+It is a separate package (and CVS module) named kde-qt-addon.])
+fi
+])
+
+AC_DEFUN(KDE_CHECK_KIMGIO,
+[
+   AC_REQUIRE([AC_BASE_PATH_KDE])
+   AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+   AC_REQUIRE([AC_FIND_TIFF])
+   AC_REQUIRE([AC_FIND_JPEG])
+   AC_REQUIRE([AC_FIND_PNG])
+   AC_REQUIRE([KDE_CREATE_LIBS_ALIASES])
+
+   if test "$1" = "existance"; then
+     AC_LANG_SAVE
+     AC_LANG_CPLUSPLUS
+     kde_save_LIBS="$LIBS"
+     LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm"
+     AC_CHECK_LIB(kimgio, kimgioRegister, [
+      LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no)
+      LIBS="$kde_save_LIBS"
+      AC_LANG_RESTORE
+   else
+      LIBKIMGIO_EXISTS=yes
+   fi
+
+   if test "$LIBKIMGIO_EXISTS" = "yes"; then
+     LIB_KIMGIO='-lkimgio'
+   else
+     LIB_KIMGIO=''
+   fi
+   AC_SUBST(LIB_KIMGIO)
+])
+
+AC_DEFUN(KDE_CREATE_LIBS_ALIASES,
+[
+   AC_REQUIRE([KDE_MISC_TESTS])
+   AC_REQUIRE([KDE_CHECK_LIBDL])
+   AC_REQUIRE([K_PATH_X])
+
+if test $kde_qtver = 2; then
+   LIB_KDECORE='-lkdecore'
+   AC_SUBST(LIB_KDECORE)
+   LIB_KDEUI='-lkdeui'
+   AC_SUBST(LIB_KDEUI)
+   LIB_KFORMULA='-lkformula'
+   AC_SUBST(LIB_KFORMULA)
+   LIB_KIO='-lkio'
+   AC_SUBST(LIB_KIO)
+   LIB_KSYCOCA='-lksycoca'
+   AC_SUBST(LIB_KSYCOCA)
+   LIB_SMB='-lsmb'
+   AC_SUBST(LIB_SMB)
+   LIB_KFILE='-lkfile'
+   AC_SUBST(LIB_KFILE)
+   LIB_KAB='-lkab'
+   AC_SUBST(LIB_KAB)
+   LIB_KHTML='-lkhtml'
+   AC_SUBST(LIB_KHTML)
+   LIB_KSPELL='-lkspell'
+   AC_SUBST(LIB_KSPELL)
+   LIB_KPARTS='-lkparts'
+   AC_SUBST(LIB_KPARTS)
+   LIB_KWRITE='-lkwrite'
+   AC_SUBST(LIB_KWRITE)
+else
+   LIB_KDECORE='-lkdecore -lXext $(LIB_QT)'
+   AC_SUBST(LIB_KDECORE)
+   LIB_KDEUI='-lkdeui $(LIB_KDECORE)'
+   AC_SUBST(LIB_KDEUI)
+   LIB_KFM='-lkfm $(LIB_KDECORE)'
+   AC_SUBST(LIB_KFM)
+   LIB_KFILE='-lkfile $(LIB_KFM) $(LIB_KDEUI)'
+   AC_SUBST(LIB_KFILE)
+   LIB_KAB='-lkab $(LIB_KIMGIO) $(LIB_KDECORE)'
+   AC_SUBST(LIB_KAB)
+fi
+])
+
+AC_DEFUN(AC_PATH_KDE,
+[
+  AC_BASE_PATH_KDE
+  AC_ARG_ENABLE(path-check, [  --disable-path-check    don't try to find out, where to install],
+  [
+  if test "$enableval" = "no";
+    then ac_use_path_checking="default"
+    else ac_use_path_checking=""
+  fi
+  ],
+  [
+  if test "$kde_qtver" = 1;
+    then ac_use_path_checking=""
+    else ac_use_path_checking="default"
+  fi
+  ]
+  )
+
+  AC_CREATE_KFSSTND($ac_use_path_checking)
+
+  AC_SUBST_KFSSTND
+  KDE_CREATE_LIBS_ALIASES
+])
+
+dnl obsolete
+AC_DEFUN(AC_CHECK_SETENV,
+[
+   AC_OBSOLETE([$0], [; instead use AC_CHECK_FUNCS([setenv unsetenv])])dnl 
+   AC_CHECK_FUNCS([setenv unsetenv])
+])
+
+AC_DEFUN(AC_CHECK_GETDOMAINNAME,
+[
+AC_MSG_CHECKING(for getdomainname)
+AC_CACHE_VAL(ac_cv_func_getdomainname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+save_CXXFLAGS="$CXXFLAGS"
+kde_safe_LIBS="$LIBS"
+LIBS="$LIBS $X_EXTRA_LIBS"
+if test "$GCC" = "yes"; then
+CXXFLAGS="$CXXFLAGS -pedantic-errors"
+fi
+AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <unistd.h>
+],
+[
+char buffer[200];
+getdomainname(buffer, 200);
+],
+ac_cv_func_getdomainname=yes,
+ac_cv_func_getdomainname=no)
+CXXFLAGS="$save_CXXFLAGS"
+LIBS=$kde_safe_LIBS
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_getdomainname)
+
+AC_MSG_CHECKING([if getdomainname needs custom prototype])
+AC_CACHE_VAL(ac_cv_proto_getdomainname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then
+  ac_cv_proto_getdomainname=no
+else
+  kde_safe_libs=$LIBS
+  LIBS="$LIBS $X_EXTRA_LIBS"
+  AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+
+extern "C" int getdomainname (char *, int);
+],
+[
+char buffer[200];
+getdomainname(buffer, 200);
+],
+  ac_cv_func_getdomainname=yes
+  ac_cv_proto_getdomainname=yes,
+  AC_MSG_RESULT([fatal error])
+  AC_MSG_ERROR([getdomainname unavailable]))
+fi
+LIBS=$kde_safe_libs
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_proto_getdomainname)
+
+if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then
+  AC_DEFINE(HAVE_GETDOMAINNAME, 1, [Define if you have getdomainname])
+fi
+if eval "test \"`echo $ac_cv_proto_getdomainname`\" = no"; then
+  AC_DEFINE(HAVE_GETDOMAINNAME_PROTO, 1,
+  [Define if you have getdomainname prototype])
+fi
+
+])
+
+AC_DEFUN(AC_CHECK_GETHOSTNAME,
+[
+
+AC_MSG_CHECKING([for gethostname])
+AC_CACHE_VAL(ac_cv_func_gethostname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+save_CXXFLAGS="$CXXFLAGS"
+if test "$GCC" = "yes"; then
+CXXFLAGS="$CXXFLAGS -pedantic-errors"
+fi
+AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+],
+[
+char buffer[200];
+gethostname(buffer, 200);
+],
+ac_cv_func_gethostname=yes,
+ac_cv_func_gethostname=no)
+CXXFLAGS="$save_CXXFLAGS"
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_gethostname)
+
+AC_MSG_CHECKING([if gethostname needs custom prototype])
+AC_CACHE_VAL(ac_cv_proto_gethostname,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then
+  ac_cv_proto_gethostname=no
+else
+  AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+
+extern "C" int gethostname (char *, int);
+],
+[
+char buffer[200];
+gethostname(buffer, 200);
+],
+  ac_cv_func_gethostname=yes
+  ac_cv_proto_gethostname=yes,
+  AC_MSG_RESULT([fatal error])
+  AC_MSG_ERROR(gethostname unavailable))
+fi
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_proto_gethostname)
+
+if eval "test \"`echo $ac_cv_proto_gethostname`\" = no"; then
+  AC_DEFINE(HAVE_GETHOSTNAME_PROTO, 1,
+  [Define if you have gethostname prototype])
+fi
+if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then
+  AC_DEFINE(HAVE_GETHOSTNAME, 1, [Define if you have gethostname])
+fi
+])
+
+AC_DEFUN(AC_CHECK_USLEEP,
+[
+AC_MSG_CHECKING([for usleep])
+AC_CACHE_VAL(ac_cv_func_usleep,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_libs_safe="$LIBS"
+LIBS="$LIBS $LIBUCB"
+AC_TRY_LINK([
+#include <stdlib.h>
+#include <unistd.h>
+],
+[
+usleep(200);
+],
+ac_cv_func_usleep=yes,
+ac_cv_func_usleep=no)
+LIBS="$ac_libs_safe"
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_usleep)
+if eval "test \"`echo $ac_cv_func_usleep`\" = yes"; then
+  AC_DEFINE(HAVE_USLEEP, 1, [Define if you have the usleep function])
+fi
+])
+
+AC_DEFUN(AC_CHECK_RANDOM,
+[
+AC_MSG_CHECKING([for random])
+AC_CACHE_VAL(ac_cv_func_random,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_libs_safe="$LIBS"
+LIBS="$LIBS $LIBUCB"
+AC_TRY_LINK([
+#include <stdlib.h>
+],
+[
+random();
+],
+ac_cv_func_random=yes,
+ac_cv_func_random=no)
+LIBS="$ac_libs_safe"
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_func_random)
+if eval "test \"`echo $ac_cv_func_random`\" = yes"; then
+  AC_DEFINE(HAVE_RANDOM, 1, [Define if you have random])
+fi
+])
+
+AC_DEFUN(AC_FIND_GIF,
+   [AC_MSG_CHECKING([for giflib])
+AC_CACHE_VAL(ac_cv_lib_gif,
+[ac_save_LIBS="$LIBS"
+LIBS="$all_libraries -lgif -lX11 $LIBSOCKET"
+AC_TRY_LINK(dnl
+[
+#ifdef __cplusplus
+extern "C" {
+#endif
+int GifLastError(void);
+#ifdef __cplusplus
+}
+#endif
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+],
+            [return GifLastError();],
+            eval "ac_cv_lib_gif=yes",
+            eval "ac_cv_lib_gif=no")
+LIBS="$ac_save_LIBS"
+])dnl
+if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then
+  AC_MSG_RESULT(yes)
+  AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif])
+else
+  AC_MSG_ERROR(You need giflib30. Please install the kdesupport package)
+fi
+])
+
+AC_DEFUN(KDE_FIND_JPEG_HELPER,
+[
+AC_MSG_CHECKING([for libjpeg$2])
+AC_CACHE_VAL(ac_cv_lib_jpeg_$1,
+[
+AC_LANG_C
+ac_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+AC_TRY_LINK(
+[/* Override any gcc2 internal prototype to avoid an error.  */
+struct jpeg_decompress_struct;
+typedef struct jpeg_decompress_struct * j_decompress_ptr;
+typedef int size_t;
+#ifdef __cplusplus
+extern "C" {
+#endif
+    void jpeg_CreateDecompress(j_decompress_ptr cinfo,
+                                    int version, size_t structsize);
+#ifdef __cplusplus
+}
+#endif
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+],
+            [jpeg_CreateDecompress(0L, 0, 0);],
+            eval "ac_cv_lib_jpeg_$1=-ljpeg$2",
+            eval "ac_cv_lib_jpeg_$1=no")
+LIBS="$ac_save_LIBS"
+CFLAGS="$ac_save_CFLAGS"
+])
+
+if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then
+  LIBJPEG="$ac_cv_lib_jpeg_$1"
+  AC_MSG_RESULT($ac_cv_lib_jpeg_$1)
+else
+  AC_MSG_RESULT(no)
+  $3
+fi
+
+])
+
+AC_DEFUN(AC_FIND_JPEG,
+[
+dnl first look for libraries
+KDE_FIND_JPEG_HELPER(6b, 6b,
+   KDE_FIND_JPEG_HELPER(normal, [],
+    [
+       LIBJPEG=
+    ]
+   )
+)
+
+dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h
+dnl requires system dependent includes loaded before it)
+jpeg_incdirs="/usr/include /usr/local/include $kde_extra_includes"
+AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir)
+test "x$jpeg_incdir" = xNO && jpeg_incdir=
+
+dnl if headers _and_ libraries are missing, this is no error, and we
+dnl continue with a warning (the user will get no jpeg support in khtml)
+dnl if only one is missing, it means a configuration error, but we still
+dnl only warn
+if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then
+  AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg])
+else
+  if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then
+    AC_MSG_WARN([
+There is an installation error in jpeg support. You seem to have only one
+of either the headers _or_ the libraries installed. You may need to either
+provide correct --with-extra-... options, or the development package of
+libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
+Disabling JPEG support.
+])
+  else
+    AC_MSG_WARN([libjpeg not found. disable JPEG support.])
+  fi
+  jpeg_incdir=
+  LIBJPEG=
+fi
+
+AC_SUBST(LIBJPEG)
+])
+
+AC_DEFUN(AC_FIND_ZLIB,
+[
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+AC_MSG_CHECKING([for libz])
+AC_CACHE_VAL(ac_cv_lib_z,
+[
+AC_LANG_C
+kde_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET"
+kde_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+AC_TRY_LINK(dnl
+[
+#include<zlib.h>
+],
+            [return (zlibVersion() == ZLIB_VERSION); ],
+            eval "ac_cv_lib_z='-lz'",
+            eval "ac_cv_lib_z=no")
+LIBS="$kde_save_LIBS"
+CFLAGS="$kde_save_CFLAGS"
+])dnl
+if test ! "$ac_cv_lib_z" = no; then
+  AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz])
+  LIBZ="$ac_cv_lib_z"
+  AC_SUBST(LIBZ)
+  AC_MSG_RESULT($ac_cv_lib_z)
+else
+  AC_MSG_ERROR(not found. Check your installation and look into config.log)
+  LIBZ=""
+  AC_SUBST(LIBZ)
+fi
+])
+
+AC_DEFUN(KDE_TRY_TIFFLIB,
+[
+AC_MSG_CHECKING([for libtiff $1])
+
+AC_CACHE_VAL(kde_cv_libtiff_$1,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+kde_save_LIBS="$LIBS"
+LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm"
+kde_save_CXXFLAGS="$CXXFLAGS"
+CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES"
+
+AC_TRY_LINK(dnl
+[
+#include<tiffio.h>
+],
+    [return (TIFFOpen( "", "r") == 0); ],
+[
+    kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ"
+], [
+    kde_cv_libtiff_$1=no
+])
+
+LIBS="$kde_save_LIBS"
+CXXFLAGS="$kde_save_CXXFLAGS"
+AC_LANG_RESTORE
+])
+
+if test "$kde_cv_libtiff_$1" = "no"; then
+    AC_MSG_RESULT(no)
+    LIBTIFF=""
+    $3
+else
+    LIBTIFF="$kde_cv_libtiff_$1"
+    AC_MSG_RESULT(yes)
+    AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff])
+    $2
+fi
+
+])
+
+AC_DEFUN(AC_FIND_TIFF,
+[
+AC_REQUIRE([K_PATH_X])
+AC_REQUIRE([AC_FIND_ZLIB])
+AC_REQUIRE([AC_FIND_JPEG])
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+KDE_TRY_TIFFLIB(tiff, [],
+   KDE_TRY_TIFFLIB(tiff34))
+
+AC_SUBST(LIBTIFF)
+])
+
+
+AC_DEFUN(AC_FIND_PNG,
+[
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+AC_REQUIRE([AC_FIND_ZLIB])
+AC_MSG_CHECKING([for libpng])
+AC_CACHE_VAL(ac_cv_lib_png,
+[
+kde_save_LIBS="$LIBS"
+LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET"
+kde_save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
+AC_LANG_C
+AC_TRY_LINK(dnl
+    [
+    #include<png.h>
+    ],
+    [
+    png_structp png_ptr = png_create_read_struct(  /* image ptr */
+		PNG_LIBPNG_VER_STRING, 0, 0, 0 );
+    return( png_ptr != 0 );
+    ],
+    eval "ac_cv_lib_png='-lpng $LIBZ -lm'",
+    eval "ac_cv_lib_png=no"
+)
+LIBS="$kde_save_LIBS"
+CFLAGS="$kde_save_CFLAGS"
+])dnl
+if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then
+  AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng])
+  LIBPNG="$ac_cv_lib_png"
+  AC_SUBST(LIBPNG)
+  AC_MSG_RESULT($ac_cv_lib_png)
+else
+  AC_MSG_RESULT(no)
+  LIBPNG=""
+  AC_SUBST(LIBPNG)
+fi
+])
+
+AC_DEFUN(AC_CHECK_BOOL,
+[
+  AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool])
+])
+
+AC_DEFUN(AC_CHECK_GNU_EXTENSIONS,
+[
+AC_MSG_CHECKING(if you need GNU extensions)
+AC_CACHE_VAL(ac_cv_gnu_extensions,
+[
+cat > conftest.c << EOF
+#include <features.h>
+
+#ifdef __GNU_LIBRARY__
+yes
+#endif
+EOF
+
+if (eval "$ac_cpp conftest.c") 2>&5 |
+  egrep "yes" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_gnu_extensions=yes
+else
+  ac_cv_gnu_extensions=no
+fi
+])
+
+AC_MSG_RESULT($ac_cv_gnu_extensions)
+if test "$ac_cv_gnu_extensions" = "yes"; then
+  AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions])
+fi
+])
+
+AC_DEFUN(KDE_CHECK_COMPILER_FLAG,
+[
+dnl AC_REQUIRE([AC_CHECK_COMPILERS]) <- breaks with autoconf 2.50
+AC_MSG_CHECKING(whether $CXX supports -$1)
+kde_cache=`echo $1 | sed 'y%.=/+-%___p_%'`
+AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache,
+[
+echo 'int main() { return 0; }' >conftest.cc
+eval "kde_cv_prog_cxx_$kde_cache=no"
+if test -z "`$CXX -$1 -c conftest.cc 2>&1`"; then
+  if test -z "`$CXX -$1 -o conftest conftest.o 2>&1`"; then
+    eval "kde_cv_prog_cxx_$kde_cache=yes"
+  fi
+fi
+rm -f conftest*
+])
+if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
+ AC_MSG_RESULT(yes)
+ :
+ $2
+else
+ AC_MSG_RESULT(no)
+ :
+ $3
+fi
+])
+
+dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables
+dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever])
+dnl it's all white-space separated
+AC_DEFUN(AC_REMOVE_FORBIDDEN,
+[ __val=$$1
+  __forbid=" $2 "
+  if test -n "$__val"; then
+    __new=""
+    ac_save_IFS=$IFS
+    IFS=" 	"
+    for i in $__val; do
+      case "$__forbid" in
+        *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;;
+	*) # Careful to not add spaces, where there were none, because otherwise
+	   # libtool gets confused, if we change e.g. CXX
+	   if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
+      esac
+    done
+    IFS=$ac_save_IFS
+    $1=$__new
+  fi
+])
+
+dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given
+AC_DEFUN(AC_VALIDIFY_CXXFLAGS,
+[dnl
+ AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath])
+ AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath])
+])
+
+AC_DEFUN(AC_CHECK_COMPILERS,
+[
+  AC_ARG_ENABLE(debug,[  --enable-debug          enables debug symbols [default=no]],
+  [
+   if test $enableval = "no"; dnl
+     then
+       kde_use_debug_code="no"
+       kde_use_debug_define=yes
+     else
+       kde_use_debug_code="yes"
+       kde_use_debug_define=no
+   fi
+  ], 
+    [kde_use_debug_code="no"
+      kde_use_debug_define=no
+  ])
+
+  dnl Just for configure --help
+  AC_ARG_ENABLE(dummyoption,[  --disable-debug         disables debug output and debug symbols [default=no]],[],[])
+
+  AC_ARG_ENABLE(strict,[  --enable-strict         compiles with strict compiler options (may not work!)],
+   [
+    if test $enableval = "no"; then
+         kde_use_strict_options="no"
+       else
+         kde_use_strict_options="yes"
+    fi
+   ], [kde_use_strict_options="no"])
+
+  AC_ARG_ENABLE(profile,[  --enable-profile        creates profiling infos [default=no]],
+    [kde_use_profiling=$enableval],
+    [kde_use_profiling="no"]
+  )
+
+  dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS
+  CFLAGS=" $CFLAGS"
+
+  AC_PROG_CC 
+
+  if test "$GCC" = "yes"; then
+    if test "$kde_use_debug_code" = "yes"; then
+      CFLAGS="-g -O2 $CFLAGS"
+      case $host in
+        *-*-linux-gnu)	
+          CFLAGS="-ansi -W -Wall -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS"
+        ;;
+      esac
+    else
+      CFLAGS="-O2 $CFLAGS"
+    fi
+  fi
+
+  if test "$kde_use_debug_define" = "yes"; then
+    CFLAGS="-DNDEBUG $CFLAGS"
+  fi
+
+  case "$host" in
+  *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";;
+  *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";;
+  esac
+
+  if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then
+     LDFLAGS=""
+  fi
+
+  CXXFLAGS=" $CXXFLAGS"
+
+  AC_PROG_CXX
+
+  if test "$GXX" = "yes"; then
+    if test "$kde_use_debug_code" = "yes"; then
+      CXXFLAGS="-g -O2 -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings $CXXFLAGS"
+
+      KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"])
+      KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,[CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"])
+      KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"])
+
+      case $host in  dnl
+      *-*-linux-gnu)
+        CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wbad-function-cast -Wcast-align -Wundef -Wconversion $CXXFLAGS"
+        ;;
+      esac
+
+      if test "$kde_use_strict_options" = "yes"; then
+        CXXFLAGS="-Wcast-qual -Wbad-function-cast -Wshadow -Wcast-align $CXXFLAGS"
+      fi
+
+      if test "$kde_very_strict" = "yes"; then
+        CXXFLAGS="-Wold-style-cast -Wredundant-decls -Wconversion $CXXFLAGS"
+      fi
+    else
+      CXXFLAGS="-O2 $CXXFLAGS"
+    fi
+  fi
+
+  if test "$kde_use_debug_define" = "yes"; then
+    CXXFLAGS="-DNDEBUG $CXXFLAGS"
+  fi  
+
+  if test "$kde_use_profiling" = "yes"; then
+    KDE_CHECK_COMPILER_FLAG(pg,
+    [
+      CFLAGS="-pg $CFLAGS"
+      CXXFLAGS="-pg $CXXFLAGS"
+    ])
+  fi
+    
+  KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"])
+  KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"])
+  KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS=	)
+  AC_SUBST(USE_EXCEPTIONS)
+  dnl obsolete macro - provided to keep things going
+  USE_RTTI=
+  AC_SUBST(USE_RTTI)
+
+  case "$host" in
+      *-*-irix*)  test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;;
+      *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";;
+      *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";;
+      *-*-solaris*) 
+        if test "$GXX" = yes; then
+          libstdcpp=`$CXX -print-file-name=libstdc++.so`
+          if test ! -f $libstdcpp; then
+             AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so])
+          fi
+        fi
+        ;;
+  esac
+
+  AC_VALIDIFY_CXXFLAGS
+
+  AC_PROG_CXXCPP
+
+  # the following is to allow programs, that are known to
+  # have problems when compiled with -O2
+  if test -n "$CXXFLAGS"; then
+      kde_safe_IFS=$IFS
+      IFS=" "
+      NOOPT_CXXFLAGS=""
+      for i in $CXXFLAGS; do
+        case $i in
+          -O*)
+                ;;
+          *)
+                NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS $i"
+                ;;
+        esac
+      done
+      IFS=$kde_safe_IFS
+  fi
+
+  AC_SUBST(NOOPT_CXXFLAGS)
+
+  KDE_CHECK_FINAL
+
+  ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), [])
+
+  KDE_CXXFLAGS=
+  AC_SUBST(KDE_CXXFLAGS)
+])
+
+AC_DEFUN(KDE_ADD_DEPENDENCIES,
+[
+   [A]M_DEPENDENCIES(CC)
+   [A]M_DEPENDENCIES(CXX)
+])
+
+dnl just a wrapper to clean up configure.in
+AC_DEFUN(KDE_PROG_LIBTOOL,
+[
+AC_REQUIRE([AC_CHECK_COMPILERS])
+AC_REQUIRE([AC_ENABLE_SHARED])
+AC_REQUIRE([AC_ENABLE_STATIC])
+
+AC_REQUIRE([AC_LIBTOOL_DLOPEN])
+
+AC_LANG_SAVE
+AC_LANG_C
+AC_OBJEXT
+AC_EXEEXT
+AC_LANG_RESTORE
+
+AM_PROG_LIBTOOL
+AC_LIBTOOL_CXX
+
+LIBTOOL_SHELL="/bin/sh ./libtool"
+#  LIBTOOL="$LIBTOOL --silent"
+KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_RPATH)"
+AC_SUBST(KDE_PLUGIN)
+])
+
+AC_DEFUN(KDE_CHECK_TYPES,
+[  AC_CHECK_SIZEOF(int, 4)dnl
+  AC_CHECK_SIZEOF(long, 4)dnl
+  AC_CHECK_SIZEOF(char *, 4)dnl
+  AC_CHECK_SIZEOF(char, 1)dnl
+])dnl
+
+AC_DEFUN(KDE_DO_IT_ALL,
+[
+AC_CANONICAL_SYSTEM
+AC_ARG_PROGRAM
+AM_INIT_AUTOMAKE($1, $2)
+AM_DISABLE_LIBRARIES
+AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde})
+AC_CHECK_COMPILERS
+KDE_PROG_LIBTOOL
+AM_KDE_WITH_NLS
+AC_PATH_KDE
+])
+
+AC_DEFUN(AC_CHECK_RPATH,
+[
+AC_MSG_CHECKING(for rpath)
+AC_ARG_ENABLE(rpath,
+      [  --disable-rpath         do not use the rpath feature of ld],
+      USE_RPATH=$enableval, USE_RPATH=yes)
+
+if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then
+
+  KDE_RPATH="-R \$(kde_libraries)"
+
+  if test -n "$qt_libraries"; then
+    KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)"
+  fi
+  dnl $x_libraries is set to /usr/lib in case
+  if test -n "$X_LDFLAGS"; then
+    KDE_RPATH="$KDE_RPATH -R \$(x_libraries)"
+  fi
+  if test -n "$KDE_EXTRA_RPATH"; then
+    KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)"
+  fi
+fi
+AC_SUBST(KDE_EXTRA_RPATH)
+AC_SUBST(KDE_RPATH)
+AC_MSG_RESULT($USE_RPATH)
+])
+
+dnl Check for the type of the third argument of getsockname
+AC_DEFUN(AC_CHECK_SOCKLEN_T, [
+  AC_MSG_CHECKING(for socklen_t)
+  AC_CACHE_VAL(ac_cv_socklen_t, [
+    AC_LANG_SAVE
+    AC_LANG_CPLUSPLUS
+    AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/socket.h>
+      ],[
+socklen_t a=0;
+getsockname(0,(struct sockaddr*)0, &a);
+      ],
+      ac_cv_socklen_t=socklen_t,
+      AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/socket.h>
+        ],[
+int a=0;
+getsockname(0,(struct sockaddr*)0, &a);
+        ],
+        ac_cv_socklen_t=int,
+        ac_cv_socklen_t=size_t
+      )
+    )
+    AC_LANG_RESTORE
+  ])
+
+  AC_MSG_RESULT($ac_cv_socklen_t)
+  if test "$ac_cv_socklen_t" != "socklen_t"; then
+    AC_DEFINE_UNQUOTED(socklen_t, $ac_cv_socklen_t,
+        [Define the real type of socklen_t])
+  fi
+  AC_DEFINE_UNQUOTED(ksize_t, socklen_t, [Compatibility define])
+
+])
+
+dnl This is a merge of some macros out of the gettext aclocal.m4
+dnl since we don't need anything, I took the things we need
+dnl the copyright for them is:
+dnl >
+dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+dnl This Makefile.in is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+dnl >
+dnl for this file it is relicensed under LGPL
+
+AC_DEFUN(AM_KDE_WITH_NLS,
+  [
+    dnl If we use NLS figure out what method
+
+    AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt,
+        [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt)
+    AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+
+     if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then
+        AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it])
+        GMSGFMT=":"
+      fi
+      MSGFMT=$GMSGFMT
+      AC_SUBST(GMSGFMT)
+      AC_SUBST(MSGFMT)
+
+      AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext,
+	[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+
+      dnl Test whether we really found GNU xgettext.
+      if test "$XGETTEXT" != ":"; then
+	dnl If it is no GNU xgettext we define it as : so that the
+	dnl Makefiles still can work.
+	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+	  : ;
+	else
+	  AC_MSG_RESULT(
+	    [found xgettext programs is not GNU xgettext; ignore it])
+	  XGETTEXT=":"
+	fi
+      fi
+     AC_SUBST(XGETTEXT)
+
+  ])
+
+# Search path for a program which passes the given test.
+# Ulrich Drepper <drepper@cygnus.com>, 1996.
+
+# serial 1
+# Stephan Kulow: I appended a _KDE against name conflicts
+
+dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR,
+dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN(AM_PATH_PROG_WITH_TEST_KDE,
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+  /*)
+  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in ifelse([$5], , $PATH, [$5]); do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if [$3]; then
+	ac_cv_path_$1="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+  ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test -n "[$]$1"; then
+  AC_MSG_RESULT([$]$1)
+else
+  AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+
+# serial 1
+
+AC_DEFUN(AM_LC_MESSAGES,
+  [if test $ac_cv_header_locale_h = yes; then
+    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+    if test $am_cv_val_LC_MESSAGES = yes; then
+      AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES])
+    fi
+  fi])
+
+dnl From Jim Meyering.
+dnl FIXME: migrate into libit.
+
+AC_DEFUN(AM_FUNC_OBSTACK,
+[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack,
+ [AC_TRY_LINK([#include "obstack.h"],
+	      [struct obstack *mem;obstack_free(mem,(char *) 0)],
+	      am_cv_func_obstack=yes,
+	      am_cv_func_obstack=no)])
+ if test $am_cv_func_obstack = yes; then
+   AC_DEFINE(HAVE_OBSTACK)
+ else
+   LIBOBJS="$LIBOBJS obstack.o"
+ fi
+])
+
+dnl From Jim Meyering.  Use this if you use the GNU error.[ch].
+dnl FIXME: Migrate into libit
+
+AC_DEFUN(AM_FUNC_ERROR_AT_LINE,
+[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line,
+ [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");],
+              am_cv_lib_error_at_line=yes,
+	      am_cv_lib_error_at_line=no)])
+ if test $am_cv_lib_error_at_line = no; then
+   LIBOBJS="$LIBOBJS error.o"
+ fi
+ AC_SUBST(LIBOBJS)dnl
+])
+
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+
+# serial 1
+# Stephan Kulow: I put a KDE in it to avoid name conflicts
+
+AC_DEFUN(AM_KDE_GNU_GETTEXT,
+  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+   AC_REQUIRE([AC_PROG_RANLIB])dnl
+   AC_REQUIRE([AC_HEADER_STDC])dnl
+   AC_REQUIRE([AC_TYPE_OFF_T])dnl
+   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+   AC_REQUIRE([AC_FUNC_MMAP])dnl
+   AC_REQUIRE([AM_KDE_WITH_NLS])dnl
+   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h string.h values.h alloca.h])
+   AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next])
+
+   AC_MSG_CHECKING(for stpcpy)
+   AC_CACHE_VAL(kde_cv_func_stpcpy,
+   [
+   kde_safe_cxxflags=$CXXFLAGS
+   CXXFLAGS="-Wmissing-prototypes -Werror"
+   AC_LANG_SAVE
+   AC_LANG_CPLUSPLUS
+   AC_TRY_COMPILE([
+   #include <string.h>
+   ],
+   [
+   char buffer[200];
+   stpcpy(buffer, buffer);
+   ],
+   kde_cv_func_stpcpy=yes,
+   kde_cv_func_stpcpy=no)
+   AC_LANG_RESTORE
+   CXXFLAGS=$kde_safe_cxxflags
+   ])
+   AC_MSG_RESULT($kde_cv_func_stpcpy)
+   if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then
+     AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy])
+   fi
+
+   AM_LC_MESSAGES
+
+   if test "x$CATOBJEXT" != "x"; then
+     if test "x$ALL_LINGUAS" = "x"; then
+       LINGUAS=
+     else
+       AC_MSG_CHECKING(for catalogs to be installed)
+       NEW_LINGUAS=
+       for lang in ${LINGUAS=$ALL_LINGUAS}; do
+         case "$ALL_LINGUAS" in
+          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+         esac
+       done
+       LINGUAS=$NEW_LINGUAS
+       AC_MSG_RESULT($LINGUAS)
+     fi
+
+     dnl Construct list of names of catalog files to be constructed.
+     if test -n "$LINGUAS"; then
+       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+     fi
+   fi
+
+  ])
+
+AC_DEFUN(AC_HAVE_XPM,
+ [AC_REQUIRE_CPP()dnl
+  AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+ test -z "$XPM_LDFLAGS" && XPM_LDFLAGS=
+ test -z "$XPM_INCLUDE" && XPM_INCLUDE=
+
+ AC_ARG_WITH(xpm, [  --without-xpm           disable color pixmap XPM tests],
+	xpm_test=$withval, xpm_test="yes")
+ if test "x$xpm_test" = xno; then
+   ac_cv_have_xpm=no
+ else
+   AC_MSG_CHECKING(for XPM)
+   AC_CACHE_VAL(ac_cv_have_xpm,
+   [
+    AC_LANG_C
+    ac_save_ldflags="$LDFLAGS"
+    ac_save_cflags="$CFLAGS"
+    LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET"
+    CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES"
+    test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS"
+    AC_TRY_LINK([#include <X11/xpm.h>],[],
+	ac_cv_have_xpm="yes",ac_cv_have_xpm="no")
+    LDFLAGS="$ac_save_ldflags"
+    CFLAGS="$ac_save_cflags"
+   ])dnl
+
+  if test "$ac_cv_have_xpm" = no; then
+    AC_MSG_RESULT(no)
+    XPM_LDFLAGS=""
+    XPMINC=""
+    $2
+  else
+    AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support])
+    if test "$XPM_LDFLAGS" = ""; then
+       XPMLIB='-lXpm $(LIB_X11)'
+    else
+       XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)'
+    fi
+    if test "$XPM_INCLUDE" = ""; then
+       XPMINC=""
+    else
+       XPMINC="-I$XPM_INCLUDE"
+    fi
+    AC_MSG_RESULT(yes)
+    $1
+  fi
+ fi
+ AC_SUBST(XPMINC)
+ AC_SUBST(XPMLIB)
+])
+
+AC_DEFUN(AC_HAVE_DPMS,
+ [AC_REQUIRE_CPP()dnl
+  AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+ test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS=
+ test -z "$DPMS_INCLUDE" && DPMS_INCLUDE=
+ DPMS_LIB=
+
+ AC_ARG_WITH(dpms, [  --without-dpms          disable DPMS power saving],
+	dpms_test=$withval, dpms_test="yes")
+ if test "x$dpms_test" = xno; then
+   ac_cv_have_dpms=no
+ else
+   AC_MSG_CHECKING(for DPMS)
+   dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms.
+   dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms".
+   AC_CACHE_VAL(ac_cv_have_dpms,
+   [
+    AC_LANG_C
+    ac_save_ldflags="$LDFLAGS"
+    ac_save_cflags="$CFLAGS"
+    ac_save_libs="$LIBS"
+    LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
+    CFLAGS="$CFLAGS $X_INCLUDES"
+    test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
+    AC_TRY_LINK([
+	#include <X11/Xproto.h>
+	#include <X11/X.h>
+	#include <X11/Xlib.h>
+	#include <X11/extensions/dpms.h>
+	int foo_test_dpms()
+	{ return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
+	ac_cv_have_dpms="yes", [
+            LDFLAGS="$ac_save_ldflags"
+            CFLAGS="$ac_save_cflags"
+            LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
+            LIBS="$LIBS -lXdpms"
+            CFLAGS="$CFLAGS $X_INCLUDES"
+            test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
+            AC_TRY_LINK([
+	        #include <X11/Xproto.h>
+        	#include <X11/X.h>
+        	#include <X11/Xlib.h>
+        	#include <X11/extensions/dpms.h>
+        	int foo_test_dpms()
+        	{ return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
+        	[
+                ac_cv_have_dpms="-lXdpms"
+                ],ac_cv_have_dpms="no")
+            ])
+    LDFLAGS="$ac_save_ldflags"
+    CFLAGS="$ac_save_cflags"
+    LIBS="$ac_save_libs"
+   ])dnl
+
+  if test "$ac_cv_have_dpms" = no; then
+    AC_MSG_RESULT(no)
+    DPMS_LDFLAGS=""
+    DPMSINC=""
+    $2
+  else
+    AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support])
+    if test "$ac_cv_have_dpms" = "-lXdpms"; then
+       DPMS_LIB="-lXdpms"
+    fi
+    if test "$DPMS_LDFLAGS" = ""; then
+       DPMSLIB="$DPMS_LIB "'$(LIB_X11)'
+    else
+       DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)'
+    fi
+    if test "$DPMS_INCLUDE" = ""; then
+       DPMSINC=""
+    else
+       DPMSINC="-I$DPMS_INCLUDE"
+    fi
+    AC_MSG_RESULT(yes)
+    $1
+  fi
+ fi
+ AC_SUBST(DPMSINC)
+ AC_SUBST(DPMSLIB)
+])
+
+AC_DEFUN(AC_HAVE_GL,
+ [AC_REQUIRE_CPP()dnl
+  AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+
+ test -z "$GL_LDFLAGS" && GL_LDFLAGS=
+ test -z "$GL_INCLUDE" && GL_INCLUDE=
+
+ AC_ARG_WITH(gl, [  --without-gl            disable 3D GL modes],
+	gl_test=$withval, gl_test="yes")
+ if test "x$gl_test" = xno; then
+   ac_cv_have_gl=no
+ else
+   AC_MSG_CHECKING(for GL)
+   AC_CACHE_VAL(ac_cv_have_gl,
+   [
+    AC_LANG_C
+    ac_save_ldflags="$LDFLAGS"
+    ac_save_cflags="$CFLAGS"
+    LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU -lX11 -lXext -lm $LIBSOCKET"
+    CFLAGS="$CFLAGS $X_INCLUDES"
+    test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
+    AC_TRY_LINK([#include <GL/gl.h>
+#include <GL/glu.h>           
+], [],
+	ac_cv_have_gl="mesa", ac_cv_have_gl="no")
+    if test "x$ac_cv_have_gl" = "xno"; then
+      LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGL -lGLU -lX11 -lXext -lm $LIBSOCKET"
+      CFLAGS="$ac_save_cflags $X_INCLUDES"
+      test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
+      AC_TRY_LINK([#include <GL/gl.h>
+#include <GL/glu.h>
+], [],
+	  ac_cv_have_gl="yes", ac_cv_have_gl="no")
+    fi
+    LDFLAGS="$ac_save_ldflags"
+    CFLAGS="$ac_save_cflags"
+   ])dnl
+
+  if test "$ac_cv_have_gl" = "no"; then
+    AC_MSG_RESULT(no)
+    GL_LDFLAGS=""
+    GLINC=""
+    $2
+  else
+    AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)])
+    if test "$GL_LDFLAGS" = ""; then
+       if test "$ac_cv_have_gl" = "mesa"; then
+          GLLIB='-lMesaGL -lMesaGLU $(LIB_X11)'
+       else
+          GLLIB='-lGL -lGLU $(LIB_X11)'
+       fi
+    else
+       if test "$ac_cv_have_gl" = "mesa"; then
+          GLLIB="$GL_LDFLAGS -lMesaGL -lMesaGLU "'$(LIB_X11)'
+       else
+          GLLIB="$GL_LDFLAGS -lGL -lGLU "'$(LIB_X11)'
+       fi
+    fi
+    if test "$GL_INCLUDE" = ""; then
+       GLINC=""
+    else
+       GLINC="-I$GL_INCLUDE"
+    fi
+    AC_MSG_RESULT($ac_cv_have_gl)
+    $1
+  fi
+ fi
+ AC_SUBST(GLINC)
+ AC_SUBST(GLLIB)
+])
+
+
+ dnl shadow password and PAM magic - maintained by ossi@kde.org
+
+AC_DEFUN(KDE_PAM, [
+  AC_REQUIRE([KDE_CHECK_LIBDL])
+
+  AC_ARG_WITH(pam,
+    [  --with-pam[=ARG]        enable support for PAM: ARG=[yes|no|service name]],
+    [ if test "x$withval" = "xyes"; then
+        use_pam=yes
+        pam_service=kde
+      elif test "x$withval" = "xno"; then
+        use_pam=no
+      else
+        use_pam=yes
+        pam_service=$withval
+      fi
+      ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service"
+    ], [
+      AC_CACHE_VAL(ac_cv_path_pam,
+        [ use_pam=no
+          AC_CHECK_LIB(pam, pam_start,
+            [ AC_CHECK_HEADER(security/pam_appl.h, 
+                [ use_pam=yes
+                  pam_service=kde ]) 
+            ], , $LIBDL)
+          ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service"
+        ])
+    ])
+  eval "$ac_cv_path_pam"
+
+  AC_MSG_CHECKING(for PAM)
+  if test "x$use_pam" = xno; then
+    AC_MSG_RESULT(no)
+    PAMLIBS=""
+  else
+    AC_MSG_RESULT(yes)
+    AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)])
+    PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL"
+
+    dnl test whether struct pam_message is const (Linux) or not (Sun)
+    AC_MSG_CHECKING(for const pam_message)
+    AC_EGREP_HEADER([struct pam_message], security/pam_appl.h,
+      [ AC_EGREP_HEADER([const struct pam_message], security/pam_appl.h,
+                        [AC_MSG_RESULT([const: Linux-type PAM])],
+                        [AC_MSG_RESULT([nonconst: Sun-type PAM])
+                        AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])]
+                        )],
+      [AC_MSG_RESULT([not found - assume const, Linux-type PAM])])
+  fi
+
+  AC_SUBST(PAMLIBS)
+])
+
+dnl DEF_PAM_SERVICE(arg name, full name, define name)
+AC_DEFUN(DEF_PAM_SERVICE, [
+  AC_ARG_WITH($1-pam,
+    [  --with-$1-pam=[val]    override PAM service from --with-pam for $2],
+    [ if test "x$use_pam" = xyes; then
+        $3_PAM_SERVICE="$withval"
+      else
+        AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected.
+You may want to enforce it by using --with-pam.])
+      fi
+    ], 
+    [ if test "x$use_pam" = xyes; then
+        $3_PAM_SERVICE="$pam_service"
+      fi
+    ])
+    if test -n "$$3_PAM_SERVICE"; then
+      AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE])
+      AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2])
+    fi
+    AC_SUBST($3_PAM_SERVICE)
+])
+
+AC_DEFUN(KDE_SHADOWPASSWD, [
+  AC_REQUIRE([KDE_PAM])
+
+  AC_CHECK_LIB(shadow, getspent,
+    [ LIBSHADOW="-lshadow"
+      ac_use_shadow=yes
+    ],
+    [ dnl for UnixWare
+      AC_CHECK_LIB(gen, getspent, 
+        [ LIBGEN="-lgen"
+          ac_use_shadow=yes
+        ], 
+        [ AC_CHECK_FUNC(getspent, 
+            [ ac_use_shadow=yes ],
+            [ ac_use_shadow=no ])
+	])
+    ])
+  AC_SUBST(LIBSHADOW)
+  AC_SUBST(LIBGEN)
+  
+  AC_MSG_CHECKING([for shadow passwords])
+
+  AC_ARG_WITH(shadow,
+    [  --with-shadow		  If you want shadow password support ],
+    [ if test "x$withval" != "xno"; then
+        use_shadow=yes
+      else
+        use_shadow=no
+      fi
+    ], [
+      use_shadow="$ac_use_shadow"
+    ])
+
+  if test "x$use_shadow" = xyes; then
+    AC_MSG_RESULT(yes)
+    AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords])
+  else
+    AC_MSG_RESULT(no)
+    LIBSHADOW=
+    LIBGEN=
+  fi
+
+  dnl finally make the relevant binaries setuid root, if we have shadow passwds.
+  dnl this still applies, if we could use it indirectly through pam.
+  if test "x$use_shadow" = xyes || 
+     ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then
+      case $host in
+      *-*-freebsd* | *-*-netbsd* | *-*-openbsd*)
+	SETUIDFLAGS="-m 4755 -o root";;
+      *)
+	SETUIDFLAGS="-m 4755";;
+      esac
+  fi
+  AC_SUBST(SETUIDFLAGS)
+
+])
+
+AC_DEFUN(KDE_PASSWDLIBS, [
+  AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT
+  AC_REQUIRE([KDE_PAM])
+  AC_REQUIRE([KDE_SHADOWPASSWD])
+
+  if test "x$use_pam" = "xyes"; then 
+    PASSWDLIBS="$PAMLIBS"
+  else
+    PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN"
+  fi
+
+  AC_SUBST(PASSWDLIBS)
+])
+
+AC_DEFUN(KDE_CHECK_LIBDL,
+[
+AC_CHECK_LIB(dl, dlopen, [
+LIBDL="-ldl"
+ac_cv_have_dlfcn=yes
+])
+
+AC_CHECK_LIB(dld, shl_unload, [
+LIBDL="-ldld"
+ac_cv_have_shload=yes
+])
+
+AC_SUBST(LIBDL)
+])
+
+AC_DEFUN(KDE_CHECK_DLOPEN,
+[
+KDE_CHECK_LIBDL
+AC_CHECK_HEADERS(dlfcn.h dl.h)
+if test "$ac_cv_header_dlfcn_h" = "no"; then
+  ac_cv_have_dlfcn=no
+fi
+
+if test "$ac_cv_header_dl_h" = "no"; then
+  ac_cv_have_shload=no
+fi
+
+dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE
+dnl (MM)
+AC_ARG_ENABLE(dlopen,
+[  --disable-dlopen        link statically [default=no]] ,
+enable_dlopen=$enableval,
+enable_dlopen=yes)
+
+# override the user's opinion, if we know it better ;)
+if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then
+  enable_dlopen=no
+fi
+
+if test "$ac_cv_have_dlfcn" = "yes"; then
+  AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn])
+fi
+
+if test "$ac_cv_have_shload" = "yes"; then
+  AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload])
+fi
+
+if test "$enable_dlopen" = no ; then
+  test -n "$1" && eval $1
+else
+  test -n "$2" && eval $2
+fi
+
+])
+
+AC_DEFUN(KDE_CHECK_DYNAMIC_LOADING,
+[
+KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no)
+KDE_PROG_LIBTOOL
+AC_MSG_CHECKING([dynamic loading])
+eval "`egrep '^build_libtool_libs=' libtool`"
+if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then
+  dynamic_loading=yes
+  AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING)
+else
+  dynamic_loading=no
+fi
+AC_MSG_RESULT($dynamic_loading)
+if test "$dynamic_loading" = "yes"; then
+  $1
+else
+  $2
+fi
+])
+
+AC_DEFUN(KDE_ADD_INCLUDES,
+[
+if test -z "$1"; then
+  test_include="Pix.h"
+else
+  test_include="$1"
+fi
+
+AC_MSG_CHECKING([for libg++ ($test_include)])
+
+AC_CACHE_VAL(kde_cv_libgpp_includes,
+[
+kde_cv_libgpp_includes=no
+
+   for ac_dir in               \
+                               \
+     /usr/include/g++          \
+     /usr/include              \
+     /usr/unsupported/include  \
+     /opt/include              \
+     $extra_include            \
+     ; \
+   do
+     if test -r "$ac_dir/$test_include"; then
+       kde_cv_libgpp_includes=$ac_dir
+       break
+     fi
+   done
+])
+
+AC_MSG_RESULT($kde_cv_libgpp_includes)
+if test "$kde_cv_libgpp_includes" != "no"; then
+  all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES"
+fi
+])
+])
+
+
+AC_DEFUN(KDE_CHECK_MICO,
+[
+AC_REQUIRE([KDE_CHECK_LIBDL])
+AC_REQUIRE([KDE_MISC_TESTS])
+AC_MSG_CHECKING(for MICO)
+
+if test -z "$MICODIR"; then
+    kde_micodir=/usr/local
+ else
+    kde_micodir="$MICODIR"
+fi
+
+AC_ARG_WITH(micodir,
+  [  --with-micodir=micodir  where mico is installed ],
+  kde_micodir=$withval,
+  kde_micodir=$kde_micodir
+)
+
+AC_CACHE_VAL(kde_cv_mico_incdir,
+[
+  mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes"
+AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir)
+
+])
+kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'`
+
+if test ! -r  $kde_micodir/include/CORBA.h; then
+  AC_MSG_ERROR([No CORBA.h found, specify another micodir])
+fi
+
+AC_MSG_RESULT($kde_micodir)
+
+MICO_INCLUDES=-I$kde_micodir/include
+AC_SUBST(MICO_INCLUDES)
+MICO_LDFLAGS=-L$kde_micodir/lib
+AC_SUBST(MICO_LDFLAGS)
+micodir=$kde_micodir
+AC_SUBST(micodir)
+
+AC_MSG_CHECKING([for MICO version])
+AC_CACHE_VAL(kde_cv_mico_version,
+[
+AC_LANG_C
+cat >conftest.$ac_ext <<EOF
+#include <stdio.h>
+#include <mico/version.h>
+int main() {
+
+   printf("MICO_VERSION=%s\n",MICO_VERSION);
+   return (0);
+}
+EOF
+ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest'
+if AC_TRY_EVAL(ac_compile); then
+  if eval `./conftest 2>&5`; then
+    kde_cv_mico_version=$MICO_VERSION
+  else
+    AC_MSG_ERROR([your system is not able to execute a small application to
+    find MICO version! Check $kde_micodir/include/mico/version.h])
+  fi
+else
+  AC_MSG_ERROR([your system is not able to compile a small application to
+  find MICO version! Check $kde_micodir/include/mico/version.h])
+fi
+])
+
+dnl installed MICO version
+mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
+mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
+mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
+
+if test "x$1" = "x"; then
+ req_version="2.3.0"
+else
+ req_version=$1
+fi
+
+dnl required MICO version
+req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
+req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
+req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
+
+if test "$mico_v_maj" -lt "$req_v_maj" || \
+   ( test "$mico_v_maj" -eq "$req_v_maj" && \
+        test "$mico_v_mid" -lt "$req_v_mid" ) || \
+   ( test "$mico_v_mid" -eq "$req_v_mid" && \
+        test "$mico_v_min" -lt "$req_v_min" )
+
+then
+  AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \
+at least is required. You should upgrade MICO.])
+else
+  AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)])
+fi
+
+LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL"
+AC_SUBST(LIBMICO)
+if test -z "$IDL"; then
+  IDL='$(kde_bindir)/cuteidl'
+fi
+AC_SUBST(IDL)
+IDL_DEPENDENCIES='$(kde_includes)/CUTE.h'
+AC_SUBST(IDL_DEPENDENCIES)
+
+idldir="\$(includedir)/idl"
+AC_SUBST(idldir)
+
+])
+
+AC_DEFUN(KDE_CHECK_MINI_STL,
+[
+AC_REQUIRE([KDE_CHECK_MICO])
+
+AC_MSG_CHECKING(if we use mico's mini-STL)
+AC_CACHE_VAL(kde_cv_have_mini_stl,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+kde_save_cxxflags="$CXXFLAGS"
+CXXFLAGS="$CXXFLAGS $MICO_INCLUDES"
+AC_TRY_COMPILE(
+[
+#include <mico/config.h>
+],
+[
+#ifdef HAVE_MINI_STL
+#error "nothing"
+#endif
+],
+kde_cv_have_mini_stl=no,
+kde_cv_have_mini_stl=yes)
+CXXFLAGS="$kde_save_cxxflags"
+AC_LANG_RESTORE
+])
+
+if test "x$kde_cv_have_mini_stl" = "xyes"; then
+   AC_MSG_RESULT(yes)
+   $1
+else
+   AC_MSG_RESULT(no)
+   $2
+fi
+])
+
+])
+
+
+AC_DEFUN(KDE_CHECK_LIBPTHREAD,
+[
+AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] )
+AC_SUBST(LIBPTHREAD)
+])
+
+AC_DEFUN(KDE_CHECK_PTHREAD_OPTION,
+[
+    AC_ARG_ENABLE(kernel-threads, [  --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.],
+	kde_use_kernthreads=$enableval, kde_use_kernthreads=no)
+
+    if test "$kde_use_kernthreads" = "yes"; then
+      ac_save_CXXFLAGS="$CXXFLAGS"
+      ac_save_CFLAGS="$CXXFLAGS"
+      CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS"
+      CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS"
+      AC_CHECK_HEADERS(pthread/linuxthreads/pthread.h)
+      CXXFLAGS="$ac_save_CXXFLAGS"
+      CFLAGS="$ac_save_CFLAGS"
+      if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then
+        kde_use_kernthreads=no
+      else
+        dnl Add proper -I and -l statements
+        AC_CHECK_LIB(lthread, pthread_join, [LIBPTHREAD="-llthread -llgcc_r"]) dnl for FreeBSD
+        if test "x$LIBPTHREAD" = "x"; then
+          kde_use_kernthreads=no
+        else
+          USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads"
+        fi
+      fi
+    else 
+      USE_THREADS=""
+      if test -z "$LIBPTHREAD"; then
+        KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-pthread"] )
+      fi
+    fi
+
+    case $host_os in
+ 	solaris*)
+		KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"])
+                CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4"
+                echo "Setting Solaris pthread compilation options"
+    		;;
+        freebsd*)
+                CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
+                echo "Setting FreeBSD pthread compilation options"
+                ;;
+        aix*)
+                CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
+                LIBPTHREAD="$LIBPTHREAD -lc_r"
+                echo "Setting AIX pthread compilation options"
+                ;;
+        linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT"
+                USE_THREADS="$USE_THREADS -DPIC -fPIC"
+                echo "Setting Linux pthread compilation options"
+                ;;
+	*)
+		;;
+    esac
+    AC_SUBST(USE_THREADS)
+    AC_SUBST(LIBPTHREAD)
+])
+
+AC_DEFUN(KDE_CHECK_THREADING,
+[
+  AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
+  AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION])
+  dnl default is yes if libpthread is found and no if no libpthread is available
+  if test -z "$LIBPTHREAD"; then
+    kde_check_threading_default=no
+  else
+    kde_check_threading_default=yes
+  fi
+  AC_ARG_ENABLE(threading, [  --disable-threading     disables threading even if libpthread found ],
+   kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default)
+
+  if test "x$kde_use_threading" = "xyes"; then
+    AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)])
+  fi
+])
+
+AC_DEFUN(KDE_TRY_LINK_PYTHON,
+[
+if test "$kde_python_link_found" = no; then
+
+if test "$1" = normal; then
+  AC_MSG_CHECKING(if a Python application links)
+else
+  AC_MSG_CHECKING(if Python depends on $2)
+fi
+
+AC_CACHE_VAL(kde_cv_try_link_python_$1,
+[
+AC_LANG_SAVE
+AC_LANG_C
+kde_save_cflags="$CFLAGS"
+CFLAGS="$CFLAGS $PYTHONINC"
+kde_save_libs="$LIBS"
+LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET"
+kde_save_ldflags="$LDFLAGS"
+LDFLAGS="$LDFLAGS $PYTHONLIB"
+
+AC_TRY_LINK(
+[
+#include <Python.h>
+],[
+	PySys_SetArgv(1, 0);
+],
+	[kde_cv_try_link_python_$1=yes],
+	[kde_cv_try_link_python_$1=no]
+)
+CFLAGS="$kde_save_cflags"
+LIBS="$kde_save_libs"
+LDFLAGS="$kde_save_ldflags"
+])
+
+if test "$kde_cv_try_link_python_$1" = "yes"; then
+  AC_MSG_RESULT(yes)
+  kde_python_link_found=yes
+  if test ! "$1" = normal; then
+    LIBPYTHON="$LIBPYTHON $2"
+  fi
+  $3
+else
+  AC_MSG_RESULT(no)
+  $4
+fi
+AC_LANG_RESTORE
+
+fi
+
+])
+
+AC_DEFUN(KDE_CHECK_PYTHON_DIR,
+[
+AC_MSG_CHECKING([for Python directory])
+ 
+AC_CACHE_VAL(kde_cv_pythondir,
+[
+  if test -z "$PYTHONDIR"; then
+    kde_cv_pythondir=/usr/local
+  else
+    kde_cv_pythondir="$PYTHONDIR"
+  fi
+])
+ 
+AC_ARG_WITH(pythondir,
+[  --with-pythondir=pythondir   use python installed in pythondir ],
+[
+  ac_python_dir=$withval
+], ac_python_dir=$kde_cv_pythondir
+)
+ 
+AC_MSG_RESULT($ac_python_dir)
+])
+
+AC_DEFUN(KDE_CHECK_PYTHON_INTERN,
+[
+AC_REQUIRE([KDE_CHECK_LIBDL])
+AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
+AC_REQUIRE([KDE_CHECK_PYTHON_DIR])
+
+if test -z "$1"; then
+  version="1.5"
+else
+  version="$1"
+fi
+
+AC_MSG_CHECKING([for Python$version])
+
+python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes"
+AC_FIND_FILE(Python.h, $python_incdirs, python_incdir)
+if test ! -r $python_incdir/Python.h; then
+  AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir)
+  python_incdir=$python_incdir/python$version
+  if test ! -r $python_incdir/Python.h; then
+    python_incdir=no
+  fi
+fi
+
+PYTHONINC=-I$python_incdir
+
+python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
+AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir)
+if test ! -r $python_libdir/libpython$version.a; then
+  AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir)
+  python_libdir=$python_libdir/python$version/config
+  if test ! -r $python_libdir/libpython$version.a; then
+    python_libdir=no
+  fi
+fi
+
+PYTHONLIB=-L$python_libdir
+kde_orig_LIBPYTHON=$LIBPYTHON
+if test -z "$LIBPYTHON"; then
+  LIBPYTHON=-lpython$version
+fi
+
+python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
+AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir)
+python_moddir=$python_moddir/python$version
+if test ! -r $python_moddir/copy.py; then
+  python_moddir=no
+fi
+
+PYTHONMODDIR=$python_moddir
+
+AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir)
+
+if test x$python_incdir = xno ||  test x$python_libdir = xno ||  test x$python_moddir = xno; then
+   LIBPYTHON=$kde_orig_LIBPYTHON
+   test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB=""
+   test "x$PYTHONINC" = "x-Ino" && PYTHONINC=""
+   $2
+else 
+  dnl Note: this test is very weak
+  kde_python_link_found=no
+  KDE_TRY_LINK_PYTHON(normal)
+  KDE_TRY_LINK_PYTHON(m, -lm)
+  KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD)
+  KDE_TRY_LINK_PYTHON(tcl, -ltcl)
+  KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm])
+  KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil])
+  KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil])
+  KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3])
+  KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil])
+  KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [],
+	[AC_MSG_WARN([it seems, Python depends on another library.
+    Pleae use \"make LIBPYTHON='-lpython$version -lotherlib'\" to fix this
+    and contact the authors to let them know about this problem])
+
+	])
+
+  LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET"
+  AC_SUBST(PYTHONINC)
+  AC_SUBST(PYTHONLIB)
+  AC_SUBST(LIBPYTHON)
+  AC_SUBST(PYTHONMODDIR)
+  AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python])
+fi
+
+])
+
+
+AC_DEFUN(KDE_CHECK_PYTHON,
+[
+  KDE_CHECK_PYTHON_INTERN("2.1", [KDE_CHECK_PYTHON_INTERN("2.0",
+        [ KDE_CHECK_PYTHON_INTERN($1, $2) ])
+  ])
+])
+
+AC_DEFUN(KDE_CHECK_STL_SGI,
+[
+    AC_MSG_CHECKING([if STL implementation is SGI like])
+    AC_CACHE_VAL(kde_cv_stl_type_sgi,
+    [
+      AC_TRY_COMPILE([
+#include <string>
+using namespace std;
+],[
+  string astring="Hallo Welt.";
+  astring.erase(0, 6); // now astring is "Welt"
+  return 0;
+], kde_cv_stl_type_sgi=yes,
+   kde_cv_stl_type_sgi=no)
+])
+
+   AC_MSG_RESULT($kde_cv_stl_type_sgi)
+
+   if test "$kde_cv_stl_type_sgi" = "yes"; then
+	AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI])
+   fi
+])
+
+AC_DEFUN(KDE_CHECK_STL_HP,
+[
+    AC_MSG_CHECKING([if STL implementation is HP like])
+    AC_CACHE_VAL(kde_cv_stl_type_hp,
+    [
+      AC_TRY_COMPILE([
+#include <string>
+using namespace std;
+],[
+  string astring="Hello World";
+  astring.remove(0, 6); // now astring is "World"
+  return 0;
+], kde_cv_stl_type_hp=yes,
+   kde_cv_stl_type_hp=no)
+])
+   AC_MSG_RESULT($kde_cv_stl_type_hp)
+
+   if test "$kde_cv_stl_type_hp" = "yes"; then
+	AC_DEFINE_UNQUOTED(HAVE_HP_STL, 1, [Define if you have a STL implementation by HP])
+   fi
+])
+
+AC_DEFUN(KDE_CHECK_STL,
+[
+    AC_LANG_SAVE
+    AC_LANG_CPLUSPLUS
+    ac_save_CXXFLAGS="$CXXFLAGS"
+    CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`"
+    KDE_CHECK_STL_SGI
+
+    if test "$kde_cv_stl_type_sgi" = "no"; then
+       KDE_CHECK_STL_HP
+
+       if test "$kde_cv_stl_type_hp" = "no"; then
+         AC_MSG_ERROR("no known STL type found")
+       fi
+    fi
+
+    CXXFLAGS="$ac_save_CXXFLAGS"
+    AC_LANG_RESTORE
+])
+
+AC_DEFUN(AC_FIND_QIMGIO,
+   [AC_REQUIRE([AC_FIND_JPEG])
+AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
+AC_MSG_CHECKING([for qimgio])
+AC_CACHE_VAL(ac_cv_lib_qimgio,
+[
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+ac_save_LIBS="$LIBS"
+ac_save_CXXFLAGS="$CXXFLAGS"
+LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT"
+CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
+AC_TRY_RUN(dnl
+[
+#include <qimageio.h>
+#include <qstring.h>
+int main() {
+		QString t = "hallo";
+		t.fill('t');
+		qInitImageIO();
+}
+],
+            ac_cv_lib_qimgio=yes,
+            ac_cv_lib_qimgio=no,
+	    ac_cv_lib_qimgio=no)
+LIBS="$ac_save_LIBS"
+CXXFLAGS="$ac_save_CXXFLAGS"
+AC_LANG_RESTORE
+])dnl
+if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then
+  LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG"
+  AC_MSG_RESULT(yes)
+  AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available])
+  AC_SUBST(LIBQIMGIO)
+else
+  AC_MSG_RESULT(not found)
+fi
+])
+
+AC_DEFUN(KDE_CHECK_ANSI,
+[
+])
+
+AC_DEFUN(KDE_CHECK_INSURE,
+[
+  AC_ARG_ENABLE(insure, [  --enable-insure             use insure++ for debugging [default=no]],
+  [
+  if test $enableval = "no"; dnl
+	then ac_use_insure="no"
+	else ac_use_insure="yes"
+   fi
+  ], [ac_use_insure="no"])
+
+  AC_MSG_CHECKING(if we will use Insure++ to debug)
+  AC_MSG_RESULT($ac_use_insure)
+  if test "$ac_use_insure" = "yes"; dnl
+       then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "????
+   fi
+])
+
+AC_DEFUN(AM_DISABLE_LIBRARIES,
+[
+    AC_PROVIDE([AM_ENABLE_STATIC])
+    AC_PROVIDE([AM_ENABLE_SHARED])
+    enable_static=no
+    enable_shared=yes
+])
+
+
+AC_DEFUN(AC_CHECK_UTMP_FILE,
+[
+    AC_MSG_CHECKING([for utmp file])
+
+    AC_CACHE_VAL(kde_cv_utmp_file,
+    [
+    kde_cv_utmp_file=no
+
+    for ac_file in    \
+                      \
+	/var/run/utmp \
+	/var/adm/utmp \
+	/etc/utmp     \
+     ; \
+    do
+     if test -r "$ac_file"; then
+       kde_cv_utmp_file=$ac_file
+       break
+     fi
+    done
+    ])
+
+    if test "$kde_cv_utmp_file" != "no"; then
+	AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries])
+	$1
+	AC_MSG_RESULT($kde_cv_utmp_file)
+    else
+    	$2
+	AC_MSG_RESULT([non found])
+    fi
+])
+
+
+AC_DEFUN(KDE_CREATE_SUBDIRSLIST,
+[
+
+DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin"
+
+if test ! -s $srcdir/subdirs; then
+  dnl Note: Makefile.common creates subdirs, so this is just a fallback
+  TOPSUBDIRS=""
+  files=`cd $srcdir && ls -1`
+  dirs=`for i in $files; do if test -d $i; then echo $i; fi; done`
+  for i in $dirs; do
+    echo $i >> $srcdir/subdirs
+  done
+fi
+
+if test -s $srcdir/inst-apps; then
+  ac_topsubdirs="`cat $srcdir/inst-apps`"
+else
+  ac_topsubdirs="`cat $srcdir/subdirs`"
+fi
+
+for i in $ac_topsubdirs; do
+  AC_MSG_CHECKING([if $i should be compiled])
+  if test -d $srcdir/$i; then
+    install_it="yes"
+    for j in $DO_NOT_COMPILE; do
+      if test $i = $j; then
+        install_it="no"
+      fi
+    done
+  else
+    install_it="no"
+  fi
+  AC_MSG_RESULT($install_it)
+  if test $install_it = "yes"; then
+    TOPSUBDIRS="$TOPSUBDIRS $i"
+  fi
+done
+
+AC_SUBST(TOPSUBDIRS)
+])
+
+AC_DEFUN(KDE_CHECK_NAMESPACES,
+[
+AC_MSG_CHECKING(whether C++ compiler supports namespaces)
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+AC_TRY_COMPILE([
+],
+[
+namespace Foo {
+  extern int i;
+  namespace Bar {
+    extern int i;
+  }
+}
+
+int Foo::i = 0;
+int Foo::Bar::i = 1;
+],[
+  AC_MSG_RESULT(yes)
+  AC_DEFINE(HAVE_NAMESPACES)
+], [
+AC_MSG_RESULT(no)
+])
+AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_CHECK_NEWLIBS,
+[
+
+])
+
+dnl ------------------------------------------------------------------------
+dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_CHECK_S_ISSOCK,
+[
+AC_MSG_CHECKING(for S_ISSOCK)
+AC_CACHE_VAL(ac_cv_have_s_issock,
+[
+AC_LANG_SAVE
+AC_LANG_C
+AC_TRY_LINK(
+[
+#include <sys/stat.h>
+],
+[
+struct stat buff;
+int b = S_ISSOCK( buff.st_mode );
+],
+ac_cv_have_s_issock=yes,
+ac_cv_have_s_issock=no)
+AC_LANG_RESTORE
+])
+AC_MSG_RESULT($ac_cv_have_s_issock)
+if test "$ac_cv_have_s_issock" = "yes"; then
+  AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.])
+fi
+])
+
+dnl ------------------------------------------------------------------------
+dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org
+dnl ------------------------------------------------------------------------
+dnl
+AC_DEFUN(AC_CHECK_KDEMAXPATHLEN,
+[
+AC_MSG_CHECKING(for MAXPATHLEN)
+AC_CACHE_VAL(ac_cv_maxpathlen,
+[
+AC_LANG_C
+cat > conftest.$ac_ext <<EOF
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+#endif
+#include <stdio.h>
+#include <sys/param.h>
+#ifndef MAXPATHLEN
+#define MAXPATHLEN 1024
+#endif
+
+KDE_HELLO MAXPATHLEN
+
+EOF
+
+ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out"
+
+if AC_TRY_EVAL(ac_try) && test -s conftest.out; then
+    ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out`
+else
+    ac_cv_maxpathlen=1024
+fi
+
+rm conftest.*
+
+])
+AC_MSG_RESULT($ac_cv_maxpathlen)
+AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] )
+])
+
+dnl -------------------------------------------------------------------------
+dnl See if the compiler supports a template repository         bero@redhat.de
+dnl -------------------------------------------------------------------------
+AC_DEFUN(KDE_COMPILER_REPO,
+[
+  REPO=""
+  NOREPO=""
+
+  KDE_CHECK_COMPILER_FLAG(frepo,
+   [
+     REPO="-frepo"
+     NOREPO="-fno-repo"
+   ])
+
+  if test -z "$REPO"; then
+  KDE_CHECK_COMPILER_FLAG(instances=explicit,
+  [
+     REPO="-instances=explicit"
+     NOREPO="-instances=extern"
+  ])
+  fi
+
+  if test -n "$REPO"; then
+     AC_DEFINE_UNQUOTED(HAVE_TEMPLATE_REPOSITORY, 1,
+		[C++ compiler supports template repository])
+     $1
+  fi
+
+  AC_SUBST(REPO)
+  AC_SUBST(NOREPO)
+])
+
+AC_DEFUN(KDE_CHECK_HEADER,
+[
+   AC_LANG_SAVE
+   kde_safe_cppflags=$CPPFLAGS
+   CPPFLAGS="$CPPFLAGS $all_includes"
+   AC_LANG_CPLUSPLUS
+   AC_CHECK_HEADER($1, $2, $3)
+   CPPFLAGS=$kde_safe_cppflags
+   AC_LANG_RESTORE
+])
+
+AC_DEFUN(KDE_CHECK_QWSPRITEFIELD,
+[
+  KDE_CHECK_HEADER(QwSpriteField.h, ,
+  [
+    AC_MSG_WARN([you don't have QwSpriteField.h somewhere. Please install
+       QwSpriteField out of kdesupport.])
+      $1
+  ])
+])
+
+AC_DEFUN(KDE_FAST_CONFIGURE,
+[
+  dnl makes configure fast (needs perl)
+  AC_ARG_ENABLE(fast-perl, [  --disable-fast-perl     disable fast Makefile generation (needs perl)],
+      with_fast_perl=$enableval, with_fast_perl=yes)
+])
+
+AC_DEFUN(KDE_CONF_FILES,
+[
+  val=
+  if test -f $srcdir/configure.files ; then
+    val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files`
+  fi
+  CONF_FILES=
+  if test -n "$val" ; then
+    for i in $val ; do
+      CONF_FILES="$CONF_FILES $i"
+    done
+  fi
+  AC_SUBST(CONF_FILES)
+])dnl
+
+AC_DEFUN(KDE_SET_PREFIX,
+[
+  unset CDPATH
+  dnl make $KDEDIR the default for the installation
+  AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde})
+
+  if test "x$prefix" = "xNONE"; then
+    prefix=$ac_default_prefix
+    ac_configure_args="$ac_configure_args --prefix $prefix"
+  fi
+  KDE_FAST_CONFIGURE
+  KDE_CONF_FILES
+])
+
+pushdef([AC_PROG_INSTALL],
+[
+  dnl our own version, testing for a -p flag
+  popdef([AC_PROG_INSTALL])
+  dnl as AC_PROG_INSTALL works as it works we first have
+  dnl to save if the user didn't specify INSTALL, as the
+  dnl autoconf one overwrites INSTALL and we have no chance to find
+  dnl out afterwards
+  test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL
+  test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM
+  test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT
+  AC_PROG_INSTALL
+
+  if test -z "$kde_save_INSTALL_given" ; then
+    # OK, user hasn't given any INSTALL, autoconf found one for us
+    # now we test, if it supports the -p flag
+    AC_MSG_CHECKING(for -p flag to install)
+    rm -f confinst.$$.* > /dev/null 2>&1
+    echo "Testtest" > confinst.$$.orig
+    ac_res=no
+    if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then
+      if test -f confinst.$$.new ; then
+        # OK, -p seems to do no harm to install
+	INSTALL="${INSTALL} -p"
+	ac_res=yes
+      fi
+    fi
+    rm -f confinst.$$.*
+    AC_MSG_RESULT($ac_res)
+  fi
+  dnl the following tries to resolve some signs and wonders coming up
+  dnl with different autoconf/automake versions
+  dnl e.g.:
+  dnl  *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s
+  dnl   and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS)
+  dnl   it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s
+  dnl  *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has
+  dnl   INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the
+  dnl   install-@DIR@PROGRAMS targets to explicitly use that flag
+  dnl  *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as
+  dnl   INSTALL_SCRIPT, which breaks with automake <= 1.4
+  dnl  *autoconf >2.13 (since 10.Apr 1999) has not that failure
+  dnl  *sometimes KDE does not use the install-@DIR@PROGRAM targets from
+  dnl   automake (due to broken Makefile.am or whatever) to install programs,
+  dnl   and so does not see the -s flag in automake > 1.4
+  dnl to clean up that mess we:
+  dnl  +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG
+  dnl   which cleans KDE's program with automake > 1.4;
+  dnl  +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems
+  dnl   with automake<=1.4
+  dnl  note that dues to this sometimes two '-s' flags are used (if KDE
+  dnl   properly uses install-@DIR@PROGRAMS, but I don't care
+  dnl
+  dnl And to all this comes, that I even can't write in comments variable
+  dnl  names used by automake, because it is so stupid to think I wanted to
+  dnl  _use_ them, therefor I have written A_M_... instead of AM_
+  dnl hmm, I wanted to say something ... ahh yes: Arghhh.
+
+  if test -z "$kde_save_INSTALL_PROGRAM_given" ; then
+    INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)'
+  fi
+  if test -z "$kde_save_INSTALL_SCRIPT_given" ; then
+    INSTALL_SCRIPT='${INSTALL}'
+  fi
+])dnl
+
+AC_DEFUN(KDE_LANG_CPLUSPLUS,
+[AC_LANG_CPLUSPLUS
+ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC'
+pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS])
+])
+
+pushdef([AC_LANG_CPLUSPLUS],
+[popdef([AC_LANG_CPLUSPLUS])
+KDE_LANG_CPLUSPLUS
+])
+
+AC_DEFUN(KDE_CHECK_LONG_LONG,
+[
+AC_MSG_CHECKING(for long long)
+AC_CACHE_VAL(kde_cv_c_long_long,
+[
+  AC_LANG_SAVE
+  AC_LANG_CPLUSPLUS
+  AC_TRY_LINK([], [
+  long long foo = 0;
+  foo = foo+1;
+  ],
+  kde_cv_c_long_long=yes, kde_cv_c_long_long=no)
+])
+AC_MSG_RESULT($kde_cv_c_long_long)
+if test "$kde_cv_c_long_long" = yes; then
+   AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype])
+fi
+])
+
+AC_DEFUN(KDE_CHECK_LIB,
+[
+     kde_save_LIBS="$LIBS"
+     LIBS="$LIBS $all_libraries"
+     case $host_os in
+      aix*) LIBS="-brtl $LIBS"
+	test "$GCC" = yes && LIBS="-Wl,$LIBS"
+	;;
+     esac
+     AC_CHECK_LIB($1, $2, $3, $4, $5)
+     LIBS="$kde_save_LIBS"
+])
+
+
+
+
+AC_DEFUN(KDE_CHECK_INITGROUPS,
+[ 
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  AC_CHECK_FUNCS(initgroups)
+  if test "x$ac_cv_func_initgroups" = "xyes"; then
+    case $host_os in
+      aix*) AC_LANG_SAVE
+            AC_LANG_CPLUSPLUS
+            AC_MSG_CHECKING([for initgroups prototype])
+            AC_CACHE_VAL(kde_cv_check_initgroups_proto,
+            [ AC_TRY_COMPILE(
+              [ #include <grp.h>
+              ],
+              [ char buffer[10];
+                gid_t id;
+                int x = initgroups(buffer,id);
+              ],
+              kde_cv_check_initgroups_proto=yes,
+              kde_cv_check_initgroups_proto=no)
+            ])
+            AC_MSG_RESULT($kde_cv_check_initgroups_proto)
+            AC_LANG_RESTORE
+            ;;
+      *)
+            kde_cv_check_initgroups_proto=yes
+            ;;
+    esac
+  else
+    kde_cv_check_initgroups_proto=no
+  fi
+  if test "x$kde_cv_check_initgroups_proto" = "xyes"; then
+    kde_check_initgroups_proto=1
+  else
+    kde_check_initgroups_proto=0
+  fi
+  AC_DEFINE_UNQUOTED(HAVE_INITGROUPS_PROTO,$kde_check_initgroups_proto,
+           [initgroups may exist but not its prototype (e.g. AIX<4.3.3:8)])
+])
+
+
+AC_DEFUN(KDE_CHECK_JAVA_DIR,
+[
+AC_MSG_CHECKING([for Java directory])
+
+AC_ARG_WITH(java,
+[  --with-java=javadir     use java installed in javadir, --without-java disables ],
+[  ac_java_dir=$withval
+], ac_java_dir=""
+)
+
+dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH
+if test "x$ac_java_dir" = xno; then
+   kde_cv_java_bindir=no
+   kde_cv_java_includedir=no
+   kde_cv_java_libjvmdir=no
+   kde_cv_java_libhpidir=no
+else
+  if test "x$ac_java_dir" = x; then
+    dnl No option set -> look in $PATH
+    AC_CACHE_VAL(kde_cv_java_bindir,
+    [
+      dnl First look for javac in $PATH. If not found we'll look at the option.
+      KDE_FIND_PATH(javac, JAVAC, [], [])
+      if test -n "$JAVAC"; then
+          kde_cv_java_bindir=`echo $JAVAC | sed -e 's,/javac$,/,'`
+          dnl this substitution might not work - well, we test for jni.h below
+          kde_cv_java_includedir=`echo $kde_cv_java_bindir | sed -e 's,bin/$,include/,'`
+      else
+          kde_cv_java_bindir=no
+      fi
+    ])
+  else
+    dnl config option set
+    kde_cv_java_bindir=$ac_java_dir/bin
+    kde_cv_java_includedir=$ac_java_dir/include
+  fi
+fi
+
+dnl Look for libjvm.so
+kde_cv_java_libjvmdir=`find $kde_cv_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1`
+dnl Look for libhpi.so and avoid green threads
+kde_cv_java_libhpidir=`find $kde_cv_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,'`
+
+dnl At this point kde_cv_java_bindir and kde_cv_java_includedir are either set or "no"
+if test ! "x$kde_cv_java_bindir" = xno; then
+
+  dnl Now check everything's fine under there
+
+  if test ! -x "$kde_cv_java_bindir/javac"; then
+    AC_MSG_ERROR([javac not found under $kde_cv_java_bindir - it seems you passed a wrong --with-java.])
+  fi
+  if test ! -x "$kde_cv_java_bindir/javah"; then
+    AC_MSG_ERROR([javah not found under $kde_cv_java_bindir. javac was found though! Use --with-java or --without-java.])
+  fi
+  if test ! -x "$kde_cv_java_bindir/jar"; then
+    AC_MSG_ERROR([jar not found under $kde_cv_java_bindir. javac was found though! Use --with-java or --without-java.])
+  fi
+  if test ! -r "$kde_cv_java_includedir/jni.h"; then
+    AC_MSG_ERROR([jni.h not found under $kde_cv_java_includedir. Use --with-java or --without-java.])
+  fi
+  if test ! -r "$kde_cv_java_libjvmdir/libjvm.so"; then
+    AC_MSG_ERROR([libjvm.so not found under $kde_cv_java_libjvmdir. Use --without-java.])
+  fi
+  if test ! -r "$kde_cv_java_libhpidir/libhpi.so"; then
+    AC_MSG_ERROR([libhpi.so not found under $kde_cv_java_libhpidir. Use --without-java.])
+  fi
+
+  jni_includes="-I$kde_cv_java_includedir"
+  dnl Strange thing, jni.h requires jni_md.h which is under genunix here..
+  dnl and under linux here..
+  test -d "$kde_cv_java_includedir/linux" && jni_includes="$jni_includes -I$kde_cv_java_includedir/linux"
+  test -d "$kde_cv_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_cv_java_includedir/genunix"
+
+  dnl Check for JNI version
+  AC_LANG_SAVE
+  AC_LANG_CPLUSPLUS
+  ac_cxxflags_safe="$CXXFLAGS"
+  CXXFLAGS="$CXXFLAGS $all_includes $jni_includes"
+
+  AC_TRY_COMPILE([
+#include <jni.h>
+	    ],
+	    [
+#ifndef JNI_VERSION_1_2
+Syntax Error
+#endif
+	    ],[ 
+	    ],[ AC_MSG_ERROR([Incorrect version of $kde_cv_java_includedir/jni.h.
+	          You need to have Java Development Kit (JDK) version 1.2. 
+	
+	          Use --with-java to specify another location.
+	          Use --without-java to configure without java support.
+        	  Or download a newer JDK and try again. 
+	          See e.g. http://java.sun.com/products/jdk/1.2 ])
+	    ])
+
+  CXXFLAGS="$ac_cxxflags_safe"    
+  AC_LANG_RESTORE
+
+  dnl All tests ok, inform and subst the variables
+  AC_MSG_RESULT([javac/javah/jar in $kde_cv_java_bindir, jni.h in $kde_cv_java_includedir])
+
+  JAVAC=$kde_cv_java_bindir/javac
+  AC_SUBST(JAVAC)
+  JAVAH=$kde_cv_java_bindir/javah
+  AC_SUBST(JAVAH)
+  JAR=$kde_cv_java_bindir/jar
+  AC_SUBST(JAR)
+  AC_SUBST(jni_includes)
+  JVMLIBS="-L$kde_cv_java_libjvmdir -ljvm -L$kde_cv_java_libhpidir -lhpi"
+  AC_SUBST(JVMLIBS)
+fi
+])
diff --git a/krozat/admin/am_edit b/krozat/admin/am_edit
new file mode 100644
index 0000000..7cadf55
--- /dev/null
+++ b/krozat/admin/am_edit
@@ -0,0 +1,1937 @@
+#!/usr/bin/perl
+
+# Expands the specialised KDE tags in Makefile.in to (hopefully) valid
+# make syntax.
+# When called without file parameters, we work recursively on all Makefile.in
+# in and below the current subdirectory. When called with file parameters,
+# only those Makefile.in are changed.
+# The currently supported tags are
+#
+# {program}_METASOURCES
+# where you have a choice of two styles
+#   {program}_METASOURCES = name1.moc name2.moc ... [\]
+#   {program}_METASOURCES = AUTO
+#       The second style requires other tags as well.
+#
+# To install icons :
+#    KDE_ICON = iconname iconname2 ...
+#    KDE_ICON = AUTO
+#
+# For documentation :
+#    ...
+#
+# and more new tags TBD!
+#
+# The concept (and base code) for this program came from automoc,
+# supplied by the following
+#
+# Matthias Ettrich <ettrich@kde.org>      (The originator)
+# Kalle Dalheimer <kalle@kde.org>      (The original implementator)
+# Harri Porten  <porten@tu-harburg.de>
+# Alex Zepeda  <jazepeda@pacbell.net>
+# David Faure <faure@kde.org>
+# Stephan Kulow <coolo@kde.org>
+#
+# I've puddled around with automoc and produced something different
+# 1999-02-01 John Birch <jb.nz@writeme.com>
+#       * Rewritten automoc to cater for more than just moc file expansion
+#         Version 0.01 does the same as automoc at this stage.
+# 1999-02-18 jb
+#       * We must always write a Makefile.in file out even if we fail
+#         because we need the "perl autokmake" in the AUTOMAKE so that a
+#         "make" will regenerate the Makefile.in correctly.
+#         Reworked moc file checking so that missing includes in cpp
+#         will work and includes in cpp when using use_automoc will also
+#         work.
+# 1999-02-23 jb
+#       * Added POFILE processing and changed the USE_AUTOMOC tag to
+#         AUTO instead.
+# ... See ChangeLog for more logs
+
+use Cwd;
+use File::Find;
+use File::Basename;
+
+# Prototype the functions
+sub initialise ();
+sub processMakefile ($);
+sub updateMakefile ();
+sub restoreMakefile ();
+
+sub removeLine ($$);
+sub appendLines ($);
+sub substituteLine ($$);
+
+sub findMocCandidates ();
+sub pruneMocCandidates ($);
+sub checkMocCandidates ();
+sub addMocRules ();
+
+sub tag_AUTOMAKE ();
+sub tag_META_INCLUDES ();
+sub tag_METASOURCES ();
+sub tag_POFILES ();
+sub tag_DOCFILES ();
+sub tag_LOCALINSTALL();
+sub tag_IDLFILES();
+sub tag_UIFILES();
+sub tag_SUBDIRS();
+sub tag_ICON();
+sub tag_CLOSURE();
+sub tag_DIST();
+
+# Some global globals...
+$verbose    = 0;        # a debug flag
+$thisProg   = "$0";     # This programs name
+$topdir     = cwd();    # The current directory
+@makefiles  = ();       # Contains all the files we'll process
+@foreignfiles = ();
+$start      = (times)[0]; # some stats for testing - comment out for release
+$version    = "v0.2";
+$errorflag  = 0;
+$cppExt     = "(cpp|cc|cxx|C|c\\+\\+)";
+$hExt       = "(h|H|hh|hxx|hpp|h\\+\\+)";
+$progId     = "KDE tags expanded automatically by " . basename($thisProg);
+$automkCall = "\n";
+$printname  = "";  # used to display the directory the Makefile is in
+$use_final  = 1;        # create code for --enable-final
+$cleantarget = "clean";
+$dryrun     = 0;
+$pathoption = 0;
+
+while (defined ($ARGV[0]))
+{
+    $_ = shift;
+    if (/^--version$/)
+    {
+        print STDOUT "\n";
+        print STDOUT basename($thisProg), " $version\n",
+                "This is really free software, unencumbered by the GPL.\n",
+                "You can do anything you like with it except sueing me.\n",
+                "Copyright 1998 Kalle Dalheimer <kalle\@kde.org>\n",
+                "Concept, design and unnecessary questions about perl\n",
+                "       by Matthias Ettrich <ettrich\@kde.org>\n\n",
+                "Making it useful by Stephan Kulow <coolo\@kde.org> and\n",
+                "Harri Porten <porten\@kde.org>\n",
+                "Updated (Feb-1999), John Birch <jb.nz\@writeme.com>\n",
+	        "Current Maintainer Stephan Kulow\n\n";
+        exit 0;
+    }
+    elsif (/^--verbose$|^-v$/)
+    {
+        $verbose = 1;       # Oh is there a problem...?
+    }
+    elsif (/^-p(.+)$|^--path=(.+)$/)
+    {
+        $thisProg = "$1/".basename($thisProg) if($1);
+        $thisProg = "$2/".basename($thisProg) if($2);
+        warn ("$thisProg doesn't exist\n")      if (!(-f $thisProg));
+        $pathoption=1;
+    }
+    elsif (/^--help$|^-h$/)
+    {
+        print STDOUT "Usage $thisProg [OPTION] ... [dir/Makefile.in]...\n",
+                "\n",
+                "Patches dir/Makefile.in generated from automake\n",
+                "(where dir can be a full or relative directory name)",
+                "\n",
+                "  -v, --verbose      verbosely list files processed\n",
+                "  -h, --help         print this help, then exit\n",
+                "  --version          print version number, then exit\n",
+                "  -p, --path=        use the path to am_edit if the path\n",
+	        "  --no-final         don't patch for --enable-final\n",
+                "                     called from is not the one to be used\n";
+	
+        exit 0;
+    }
+    elsif (/^--no-final$/)
+    {
+	$use_final = 0;
+        $thisProg .= " --no-final";
+    }
+    elsif (/^-n$/)
+    {
+    	$dryrun = 1;
+    }
+    else
+    {
+        # user selects what input files to check
+        # add full path if relative path is given
+        $_ = cwd()."/".$_   if (! /^\//);
+        print "User wants $_\n" if ($verbose);
+        push (@makefiles, $_);
+    }
+}
+
+if ($thisProg =~ /^\// && !$pathoption )
+{
+  print STDERR "Illegal full pathname call performed...\n",
+      "The call to \"$thisProg\"\nwould be inserted in some Makefile.in.\n",
+      "Please use option --path.\n";
+  exit 1;
+}
+
+# Only scan for files when the user hasn't entered data
+if (!@makefiles)
+{
+    print STDOUT "Scanning for Makefile.in\n"       if ($verbose);
+    find (\&add_makefile, cwd());
+    #chdir('$topdir');
+} else {
+    print STDOUT "Using user enter input files\n"   if ($verbose);
+}
+
+foreach $makefile (sort(@makefiles))
+{
+    processMakefile ($makefile);
+    last            if ($errorflag);
+}
+
+# Just some debug statistics - comment out for release as it uses printf.
+printf STDOUT "Time %.2f CPU sec\n", (times)[0] - $start     if ($verbose);
+
+exit $errorflag;        # causes make to fail if erroflag is set
+
+#-----------------------------------------------------------------------------
+
+# In conjunction with the "find" call, this builds the list of input files
+sub add_makefile ()
+{
+  push (@makefiles, $File::Find::name) if (/Makefile.in$/);
+}
+
+#-----------------------------------------------------------------------------
+
+# Processes a single make file
+# The parameter contains the full path name of the Makefile.in to use
+sub processMakefile ($)
+{
+    # some useful globals for the subroutines called here
+    local ($makefile)       = @_;
+    local @headerdirs       = ('.');
+    local $haveAutomocTag   = 0;
+    local $MakefileData     = "";
+
+    local $cxxsuffix  = "KKK";
+
+    local @programs = ();  # lists the names of programs and libraries
+    local $program = "";
+
+    local %realObjs = ();  # lists the objects compiled into $program
+    local %sources = ();   # lists the sources used for $program
+    local %finalObjs = (); # lists the objects compiled when final
+    local %realname = ();  # the binary name of program variable
+    local %idlfiles = ();  # lists the idl files used for $program
+    local %globalmocs = ();# list of all mocfiles (in %mocFiles format)
+    local %important = (); # list of files to be generated asap
+
+    local $allidls = "";
+    local $alluis = "";
+    local $idl_output = "";# lists all idl generated files for cleantarget
+    local $ui_output = "";# lists all uic generated files for cleantarget
+
+    local %depedmocs = ();
+    
+    local $metasourceTags = 0;
+    local $dep_files      = "";
+    local $dep_finals     = "";
+    local %target_adds    = (); # the targets to add
+    local $kdelang        = "";
+    local @cleanfiles     = ();
+    local $cleanMoc       = "";
+    local $closure_output = "";
+
+    $makefileDir = dirname($makefile);
+    chdir ($makefileDir);
+    $printname = $makefile;
+    $printname =~ s/^\Q$topdir\E\///;
+    $makefile = basename($makefile);
+
+    print STDOUT "Processing makefile $printname\n"   if ($verbose);
+    
+    # Setup and see if we need to do this.
+    return      if (!initialise());
+    
+    tag_AUTOMAKE ();            # Allows a "make" to redo the Makefile.in
+    tag_META_INCLUDES ();       # Supplies directories for src locations
+    
+    foreach $program (@programs) {
+        $sources_changed{$program} = 0;
+        $depedmocs{$program} = "";
+        $important{$program} = "";
+	tag_IDLFILES();             # Sorts out idl rules
+	tag_CLOSURE();
+        tag_METASOURCES ();         # Sorts out the moc rules
+	tag_UIFILES();             # Sorts out ui rules
+        if ($sources_changed{$program}) {
+            my $lookup = "$program" . '_SOURCES\s*=\s*(.*)';
+            substituteLine($lookup, "$program\_SOURCES=" . $sources{$program});
+        }
+        if ($important{$program}) {
+            local %source_dict = ();
+            for $source (split(/[\034\s]+/, $sources{$program})) {
+                $source_dict{$source} = 1;
+            }
+            for $source (@cleanfiles) {
+                $source_dict{$source} = 0;
+            }
+            for $source (keys %source_dict) {
+                next if (!$source);
+                if ($source_dict{$source}) {
+                    # sanity check
+                    if (! -f $source) {
+                        print STDERR "Error: $source is listed in a _SOURCE line in $printname, but doesn't exist yet. Put it in DISTCLEANFILES!\n";
+                    } else {
+                        $target_adds{"\$(srcdir)/$source"} .= $important{$program};
+                    }
+                }
+            }
+        }
+    }
+    if ($cleanMoc) {
+        # Always add dist clean tag
+        # Add extra *.moc.cpp files created for USE_AUTOMOC because they
+        # aren't included in the normal *.moc clean rules.
+        appendLines ("$cleantarget-metasources:\n\t-rm -f $cleanMoc\n");
+        $target_adds{"$cleantarget-am"} .= "$cleantarget-metasources ";
+    }
+    tag_DIST();
+
+    if ($idl_output) {
+        appendLines ("$cleantarget-idl:\n\t-rm -f $idl_output\n");
+        $target_adds{"$cleantarget-am"} .= "$cleantarget-idl ";
+    }
+
+    if ($ui_output) {
+        appendLines ("$cleantarget-ui:\n\t-rm -f $ui_output\n");
+        $target_adds{"$cleantarget-am"} .= "$cleantarget-ui ";
+    }
+
+    if ($closure_output) {
+        appendLines ("$cleantarget-closures:\n\t-rm -f $closure_output\n");
+        $target_adds{"$cleantarget-am"} .= "$cleantarget-closures ";
+    }
+
+    if ($MakefileData =~ /\nKDE_LANG\s*=\s*(\S*)\s*\n/) {
+        $kdelang = '$(KDE_LANG)'
+    } else {
+        $kdelang = '';
+    }
+
+    tag_POFILES ();             # language rules for po directory
+    tag_DOCFILES ();            # language rules for doc directories
+    tag_LOCALINSTALL();         # add $(DESTDIR) before all kde_ dirs
+    tag_ICON();
+    tag_SUBDIRS();
+
+    my $tmp = "force-reedit:\n";
+    $tmp   .= "\t$automkCall\n\tcd \$(top_srcdir) && perl $thisProg $printname\n\n";
+    appendLines($tmp);
+    
+    make_meta_classes();
+    tag_FINAL() if (!$kdeopts{"nofinal"});
+
+    my $final_lines = "final:\n\t\$(MAKE) ";
+    my $nofinal_lines = "no-final:\n\t\$(MAKE) ";
+
+    foreach $program (@programs) {
+        
+        my $lookup = "$program\_OBJECTS.*=[^\n]*";
+        
+        my $new = "";
+        
+        my @list = split(/[\034\s]+/, $realObjs{$program});
+        
+        if (!$kdeopts{"nofinal"} && @list > 1 && $finalObjs{$program}) {
+            
+            $new .= "$program\_final\_OBJECTS = " . $finalObjs{$program};
+            $new .= "\n$program\_nofinal\_OBJECTS = " . $realObjs{$program};
+            $new .= "\n\@KDE_USE_FINAL_FALSE\@$program\_OBJECTS = \$($program\_nofinal\_OBJECTS)";
+            $new .= "\n\@KDE_USE_FINAL_TRUE\@$program\_OBJECTS = \$($program\_final\_OBJECTS)";
+            
+            $final_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" ";
+            $nofinal_lines .= "$program\_OBJECTS=\"\$($program\_nofinal\_OBJECTS)\" ";
+        } else {
+            $new = "$program\_OBJECTS = " . $realObjs{$program};
+        }
+        substituteLine ($lookup, $new);
+    }
+    appendLines($final_lines . "all-am");
+    appendLines($nofinal_lines . "all-am");
+    
+    my $lookup = 'DEP_FILES\s*=([^\n]*)';
+    if ($MakefileData =~ /\n$lookup\n/o) {
+        $depfiles = $1;
+        
+        if ($dep_finals) {
+            $lines  = "\@KDE_USE_FINAL_TRUE\@DEP_FILES = $dep_files $dep_finals \034\t$depfiles\n";
+            $lines .= "\@KDE_USE_FINAL_FALSE\@DEP_FILES = $dep_files $depfiles\n";
+        } else {
+            $lines = "DEP_FILES = $dep_files $depfiles\n";
+        }
+        
+        substituteLine($lookup, $lines);
+    }
+    
+    my $cvs_lines = "cvs-clean:\n";
+    $cvs_lines .= "\t\$(MAKE) -f \$(top_srcdir)/admin/Makefile.common cvs-clean\n";
+    appendLines($cvs_lines);
+    
+    $cvs_lines  = "kde-rpo-clean:\n";
+    $cvs_lines .= "\t-rm -f *.rpo\n";
+    appendLines($cvs_lines);
+    $target_adds{"clean"} .= "kde-rpo-clean ";
+
+    # some strange people like to do a install-exec, and expect that also
+    # all modules are installed.  automake doesn't know this, so we need to move
+    # this here from install-data to install-exec.
+    if ($MakefileData =~ m/\nkde_module_LTLIBRARIES\s*=/) {
+      $target_adds{"install-exec-am"} .= "install-kde_moduleLTLIBRARIES";
+      my $lookup = "install-data-am:\s*(.*)";
+      if ($MakefileData =~ /\n$lookup\n/) {
+        my $newdeps = $1;
+	$newdeps =~ s/\s*install-kde_moduleLTLIBRARIES\s*/ /g;
+	substituteLine($lookup, "install-data-am: " . $newdeps);
+      }
+    }
+    
+    my $lines = "";
+
+    foreach $add (keys %target_adds) {
+        my $lookup = quotemeta($add) . ":\s*(.*)";
+        if ($MakefileData =~ /\n$lookup\n/) {
+            substituteLine($lookup, "$add: " . $target_adds{$add} . $1);
+        } else {
+            $lines .= "$add: " . $target_adds{$add} . "\n";
+        }
+    }
+    if ($lines) {
+        appendLines($lines);
+    }
+
+    my $found = 1;
+    
+    while ($found) {
+        if ($MakefileData =~ m/\n(.*)\$\(CXXFLAGS\)(.*)\n/) {
+            my $vor = $1;   # "vor" means before in German
+            my $nach = $2; # "nach" means after in German
+            my $lookup = quotemeta("$1\$(CXXFLAGS)$2");
+            my $replacement = "$1\$(KCXXFLAGS)$2";
+            $MakefileData =~ s/$lookup/$replacement/;
+            $lookup =~ s/\\\$\\\(CXXFLAGS\\\)/\\\$\\\(KCXXFLAGS\\\)/;
+            $replacement = "$vor\$(KCXXFLAGS) \$(KDE_CXXFLAGS)$nach";
+            substituteLine($lookup, $replacement);
+        } else {
+            $found = 0;
+        }
+    }
+
+    $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=link) (\$\(CXXLD\).*\$\(KCXXFLAGS\))';
+    
+    if ($MakefileData =~ m/$lookup/ ) {
+        $MakefileData =~ s/$lookup/$1 --tag=CXX $2/;
+    }
+
+    $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=compile) (\$\(CXX\).*\$\(KCXXFLAGS\))';
+    if ($MakefileData =~ m/$lookup/ ) {
+        $MakefileData =~ s/$lookup/$1 --tag=CXX $2/;
+    }
+
+    $MakefileData =~ s/\$\(KCXXFLAGS\)/\$\(CXXFLAGS\)/g;
+
+    $lookup = '(.*)cp -pr \$\$/\$\$file \$\(distdir\)/\$\$file(.*)';
+    if ($MakefileData =~ m/\n$lookup\n/) {
+        substituteLine($lookup, "$1cp -pr \$\$d/\$\$file \$(distdir)/\$\$file$2");
+    }
+
+    # Always update the Makefile.in
+    updateMakefile ();
+    return;
+}
+
+#-----------------------------------------------------------------------------
+
+# Check to see whether we should process this make file.
+# This is where we look for tags that we need to process.
+# A small amount of initialising on the tags is also done here.
+# And of course we open and/or create the needed make files.
+sub initialise ()
+{
+    if (! -r "Makefile.am") {
+	print STDOUT "found Makefile.in without Makefile.am\n" if ($verbose);
+	return 0;
+    }
+
+    # Checking for files to process...
+    open (FILEIN, $makefile)
+      || die "Could not open $makefileDir/$makefile: $!\n";
+    # Read the file
+    # stat(FILEIN)[7] might look more elegant, but is slower as it 
+    # requires stat'ing the file
+    seek(FILEIN, 0, 2);
+    my $fsize = tell(FILEIN);
+    seek(FILEIN, 0, 0);
+    read FILEIN, $MakefileData, $fsize;
+    close FILEIN;
+    print "DOS CRLF within $makefileDir/$makefile!\n" if($MakefileData =~ y/\r//d);
+
+    # Remove the line continuations, but keep them marked
+    # Note: we lose the trailing spaces but that's ok.
+    $MakefileData =~ s/\\\s*\n/\034/g;
+
+    # If we've processed the file before...
+    restoreMakefile ()      if ($MakefileData =~ /$progId/);
+
+    foreach $dir (@foreignfiles) {
+      if (substr($makefileDir,0,length($dir)) eq $dir) {
+	return 0;
+      }
+    }
+
+    %kdeopts = ();
+    $kdeopts{"foreign"} = 0;
+    $kdeopts{"qtonly"} = 0;
+    $kdeopts{"nofinal"} = !$use_final; # default
+
+    if ($MakefileData =~ /\nKDE_OPTIONS\s*=\s*([^\n]*)\n/) {
+        local @kde_options = split(/[\s\034]/, $1);
+        if (grep(/^foreign$/, @kde_options)) {
+            push(@foreignfiles, $makefileDir . "/");
+            return 0; # don't touch me
+        }
+        for $opt (@kde_options) {
+            if (!defined $kdeopts{$opt}) {
+                print STDERR "Warning: unknown option $opt in $printname\n";
+            } else {
+                $kdeopts{$opt} = 1;
+            }
+        }
+    }
+
+    # Look for the tags that mean we should process this file.
+    $metasourceTags = 0;
+    $metasourceTags++    while ($MakefileData =~ /\n[^=\#]*METASOURCES\s*=/g);
+
+    my $pofileTag = 0;
+    $pofileTag++    while ($MakefileData =~ /\nPOFILES\s*=/g);
+    if ($pofileTag > 1)
+      {
+          print STDERR "Error: Only one POFILES tag allowed\n";
+          $errorflag = 1;
+      }
+
+    while ($MakefileData =~ /\n\.SUFFIXES:([^\n]+)\n/g) {
+	my @list=split(' ', $1);
+	foreach $ext (@list) {
+	    if ($ext =~ /^\.$cppExt$/) {
+		$cxxsuffix = $ext;
+		$cxxsuffix =~ s/\.//g;
+		print STDOUT "will use suffix $cxxsuffix\n" if ($verbose);
+		last;
+	    }
+	}
+    }
+                                                     
+    while ($MakefileData =~ /\n(\S*)_OBJECTS\s*=[ \t\034]*([^\n]*)\n/g) {
+        
+        my $program = $1;
+        my $objs = $2; # safe them
+        
+        my $ocv = 0;
+        
+        my @objlist = split(/[\s\034]+/, $objs);
+        foreach $obj (@objlist) {
+            if ($obj =~ /\$\((\S+)\)/ ) {
+                my $variable = $1;
+                if ($variable !~ 'OBJEXT') {
+                    $ocv = 1;
+                }
+            }
+        }
+        
+        next if ($ocv);
+        
+        $program =~ s/^am_// if ($program =~ /^am_/);
+        
+        print STDOUT "found program $program\n" if ($verbose);
+        push(@programs, $program);
+        
+        $realObjs{$program} = $objs;
+        
+        if ($MakefileData =~ /\n$program\_SOURCES\s*=\s*(.*)\n/) {
+            $sources{$program} = $1;
+        } else {
+            $sources{$program} = "";
+            print STDERR "found program with no _SOURCES: $program\n";
+        }
+        
+        my $realprogram = $program;
+        $realprogram =~ s/_/./g; # unmask to regexp
+        if ($MakefileData =~ /\n($realprogram)(\$\(EXEEXT\)?)?:.*\$\($program\_OBJECTS\)/) {
+            $realname{$program} = $1;
+        } else {
+            # not standard Makefile - nothing to worry about
+            $realname{$program} = "";
+        }
+    }
+    
+    my $lookup = '\nDEPDIR\s*=.*';
+    if ($MakefileData !~ /($lookup)\n/o) {
+        $lookup = '\nbindir\s*=.*';
+        if ($MakefileData =~ /($lookup)\n/) {
+            substituteLine ($lookup, "DEPDIR = .deps\n$1");
+        }
+    } else {
+        print STDERR "$printname defines DEPDIR. This means you're using automake > 1.4 - this is not supported!\n";
+    }
+
+    my @marks = ('MAINTAINERCLEANFILES', 'CLEANFILES', 'DISTCLEANFILES');
+    foreach $mark (@marks) {
+        while ($MakefileData =~ /\n($mark)\s*=\s*([^\n]*)/g) {
+            foreach $file (split('[\034\s]', $2)) {
+                $file =~ s/\.\///;
+                push(@cleanfiles, $file);
+            }
+        }
+    }
+
+    my $localTag = 0;
+    $localTag++ if ($MakefileData =~ /\ninstall-\S+-local:/);
+    
+    return (!$errorflag);
+}
+
+#-----------------------------------------------------------------------------
+
+# Gets the list of user defined directories - relative to $srcdir - where
+# header files could be located.
+sub tag_META_INCLUDES ()
+{
+    my $lookup = '[^=\n]*META_INCLUDES\s*=\s*(.*)';
+    return 1    if ($MakefileData !~ /($lookup)\n/o);
+    print STDOUT "META_INCLUDE processing <$1>\n"       if ($verbose);
+
+    my $headerStr = $2;
+    removeLine ($lookup, $1);
+
+    $headerStr =~ tr/\034/ /;
+    my @headerlist = split(' ', $headerStr);
+
+    foreach $dir (@headerlist)
+    {
+        $dir =~ s#\$\(srcdir\)#.#;
+        if (! -d $dir)
+        {
+            print STDERR "Warning: $dir can't be found. ",
+                            "Must be a relative path to \$(srcdir)\n";
+        }
+        else
+        {
+            push (@headerdirs, $dir);
+        }
+    }
+
+    return 0;
+}
+
+#-----------------------------------------------------------------------------
+
+sub tag_FINAL()
+{
+    my @final_names = ();
+    
+    foreach $program (@programs) {
+        
+        if ($sources{$program} =~ /\(/) {
+            print STDOUT "found ( in $program\_SOURCES. skipping\n" if ($verbose);
+            next;
+        }
+        
+        my $mocsources = "";
+        
+        my @progsources = split(/[\s\034]+/, $sources{$program});
+        my %sourcelist = ();
+        
+        foreach $source (@progsources) {
+            my $suffix = $source;
+            $suffix =~ s/^.*\.([^\.]+)$/$1/;
+            
+            if (defined($sourcelist{$suffix})) {
+                $sourcelist{$suffix} .= " " . $source;
+            } else {
+                $sourcelist{$suffix} .= $source;
+            }
+        }
+        
+        foreach $suffix (keys %sourcelist) {
+            
+            # See if this file contains c++ code. (ie Just check the files suffix against
+            my $suffix_is_cxx = 0;
+            if($suffix =~ /($cppExt)$/) {
+              $cxx_suffix = $1;
+              $suffix_is_cxx = 1;
+            }
+            
+            my $mocfiles_in = ($suffix eq $cxxsuffix) &&
+              defined($depedmocs{$program});
+            
+            my @sourcelist = split(/[\s\034]+/, $sourcelist{$suffix});
+            
+            if ((@sourcelist == 1 && !$mocfiles_in) || $suffix_is_cxx != 1 ) {
+                
+                # we support IDL on our own
+                if ($suffix =~ /^skel$/ || $suffix =~ /^stub/ || $suffix =~ /^h$/
+                    || $suffix =~ /^ui$/ ) {
+                    next;
+                }
+                
+                foreach $file (@sourcelist) {
+                    
+                    $file =~ s/\Q$suffix\E$//;
+                    
+                    $finalObjs{$program} .= $file;
+                    if ($program =~ /_la$/) {
+                        $finalObjs{$program} .= "lo ";
+                    } else {
+                        $finalObjs{$program} .= "o ";
+                    }
+                }
+                next; # suffix
+            }
+            
+            my $source_deps = "";
+            foreach $source (@sourcelist) {
+                if (-f $source) {
+                    $source_deps .= "\$(srcdir)/$source ";
+                } else {
+                    $source_deps .= "$source ";
+                }
+            }
+            
+            $handling = "$program.all_$suffix.$suffix: \$(srcdir)/Makefile.in " . $source_deps . " ";
+            
+            if ($mocfiles_in) {
+                $handling .= $depedmocs{$program};
+                foreach $mocfile (split(' ', $depedmocs{$program})) {
+                    if ($mocfile =~ m/\.$suffix$/) {
+                        $mocsources .= " " . $mocfile;
+                    }
+                }
+            }
+            
+            $handling .= "\n";
+            $handling .= "\t\@echo 'creating $program.all_$suffix.$suffix ...'; \\\n";
+            $handling .= "\trm -f $program.all_$suffix.files $program.all_$suffix.final; \\\n";
+            $handling .= "\techo \"#define KDE_USE_FINAL 1\" >> $program.all_$suffix.final; \\\n";
+            $handling .= "\tfor file in " . $sourcelist{$suffix} . " $mocsources; do \\\n";
+            $handling .= "\t  echo \"#include \\\"\$\$file\\\"\" >> $program.all_$suffix.files; \\\n";
+            $handling .= "\t  test ! -f \$\(srcdir\)/\$\$file || egrep '^#pragma +implementation' \$\(srcdir\)/\$\$file >> $program.all_$suffix.final; \\\n";
+            $handling .= "\tdone; \\\n";
+            $handling .= "\tcat $program.all_$suffix.final $program.all_$suffix.files  > $program.all_$suffix.$suffix; \\\n";
+            $handling .= "\trm -f $program.all_$suffix.final $program.all_$suffix.files\n";
+            
+            appendLines($handling);
+            
+            push(@final_names, "$program.all_$suffix.$suffix");
+            $finalObjs{$program} .= "$program.all_$suffix.";
+            if ($program =~ /_la$/) {
+                $finalObjs{$program} .= "lo ";
+            } else {
+                $finalObjs{$program} .= "o ";
+            }
+        }
+    }
+    
+    if (!$kdeopts{"nofinal"} && @final_names >= 1) {
+        # add clean-final target
+        my $lines = "$cleantarget-final:\n";
+        $lines .= "\t-rm -f " . join(' ', @final_names) . "\n" if (@final_names);
+        appendLines($lines);
+        $target_adds{"$cleantarget-am"} .= "$cleantarget-final ";
+        
+        foreach $finalfile (@final_names) {
+            $finalfile =~ s/\.[^.]*$/.P/;
+            $dep_finals .= " \$(DEPDIR)/$finalfile";
+        }
+    }
+}
+
+# Organises the list of headers that we'll use to produce moc files
+# from.
+sub tag_METASOURCES ()
+{
+    local @newObs           = ();  # here we add to create object files
+    local @deped            = ();  # here we add to create moc files
+    local $mocExt           = ".moc";
+    local %mocFiles         = ();
+
+    my $line = "";
+    my $postEqual = "";
+
+    my $lookup;
+    my $found = "";
+
+    if ($metasourceTags > 1) {
+	$lookup = $program . '_METASOURCES\s*=\s*(.*)';
+	return 1    if ($MakefileData !~ /\n($lookup)\n/);
+	$found = $1;
+    } else {
+	$lookup = $program . '_METASOURCES\s*=\s*(.*)';
+	if ($MakefileData !~ /\n($lookup)\n/) {
+	    $lookup = 'METASOURCES\s*=\s*(.*)';
+	    return 1    if ($MakefileData !~ /\n($lookup)\n/o);
+	    $found = $1;
+	    $metasourceTags = 0; # we can use the general target only once
+	} else {
+            $found = $1;
+        }
+    }
+    print STDOUT "METASOURCE processing <$found>)\n"      if ($verbose);
+    
+    $postEqual = $found;
+    $postEqual =~ s/[^=]*=//;
+    
+    removeLine ($lookup, $found);
+    
+    # Always find the header files that could be used to "moc"
+    return 1    if (findMocCandidates ());
+    
+    if ($postEqual =~ /AUTO\s*(\S*)|USE_AUTOMOC\s*(\S*)/)
+    {
+	print STDERR "$printname: the argument for AUTO|USE_AUTOMOC is obsolete" if ($+);
+	$mocExt = ".moc.$cxxsuffix";
+	$haveAutomocTag = 1;
+    }
+    else
+    {
+        # Not automoc so read the list of files supplied which
+        # should be .moc files.
+
+        $postEqual =~ tr/\034/ /;
+
+        # prune out extra headers - This also checks to make sure that
+        # the list is valid.
+        pruneMocCandidates ($postEqual);
+    }
+
+    checkMocCandidates ();
+    
+    if (@newObs) {
+        my $ext =  ($program =~ /_la$/) ? ".moc.lo " : ".moc.o ";
+        $realObjs{$program} .= "\034" . join ($ext, @newObs) . $ext;
+        $depedmocs{$program} = join (".moc.$cxxsuffix " , @newObs) . ".moc.$cxxsuffix";
+        foreach $file (@newObs) {
+            $dep_files .= " \$(DEPDIR)/$file.moc.P";
+        }
+    }
+    if (@deped) {
+        $depedmocs{$program} .= " ";
+        $depedmocs{$program} .= join('.moc ', @deped) . ".moc";
+        $depedmocs{$program} .= " ";
+    }
+    addMocRules ();
+    @globalmocs{keys %mocFiles}=values %mocFiles;
+}
+
+#-----------------------------------------------------------------------------
+
+# Returns 0 if the line was processed - 1 otherwise.
+# Errors are logged in the global $errorflags
+sub tag_AUTOMAKE ()
+{
+    my $lookup = '.*cd \$\(top_srcdir\)\s+&&\s+\$\(AUTOMAKE\)(.*)';
+    return 1    if ($MakefileData !~ /\n($lookup)\n/);
+    print STDOUT "AUTOMAKE processing <$1>\n"        if ($verbose);
+
+    my $newLine = $1."\n\tcd \$(top_srcdir) && perl $thisProg $printname";
+    substituteLine ($lookup, $newLine);
+    $automkCall = $1;
+    return 0;
+}
+
+#-----------------------------------------------------------------------------
+
+sub handle_TOPLEVEL()
+{
+    my $pofiles = "";
+    my @restfiles = ();
+    opendir (THISDIR, ".");
+    foreach $entry (readdir(THISDIR)) {
+        next if (-d $entry);
+        
+        next if ($entry eq "CVS" || $entry =~ /^\./  || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry =~ /.gmo$/);
+                 
+        if ($entry =~ /\.po$/) {
+             next;
+        }
+        push(@restfiles, $entry);
+    }
+    closedir (THISDIR);
+            
+    if (@restfiles) {
+        $target_adds{"install-data-am"} .= "install-nls-files ";
+        $lines = "install-nls-files:\n";
+        $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$kdelang\n";
+        for $file (@restfiles) {
+            $lines .= "\t\$(INSTALL_DATA) \$\(srcdir\)/$file \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n";
+        }
+	$target_adds{"uninstall"} .= "uninstall-nls-files ";
+        $lines .= "uninstall-nls-files:\n";
+        for $file (@restfiles) {
+            $lines .= "\t-rm -f \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n";
+        }
+        appendLines($lines);
+    }
+    
+    return 0;
+}
+
+#-----------------------------------------------------------------------------
+
+sub tag_SUBDIRS ()
+{
+  if ($MakefileData !~ /\nSUBDIRS\s*=\s*\$\(AUTODIRS\)\s*\n/) {
+    return 1;
+  }
+
+  my $subdirs;
+
+  opendir (THISDIR, ".");
+  foreach $entry (readdir(THISDIR)) {
+    next if ($entry eq "CVS" || $entry =~ /^\./);
+    if (-d $entry && -f $entry . "/Makefile.am") {
+      $subdirs .= " $entry";
+      next;
+    }
+  }
+  closedir (THISDIR);
+
+  my $lines = "SUBDIRS =$subdirs\n";
+  substituteLine('SUBDIRS\s*=.*', $lines);
+  return 0;
+}
+
+sub tag_IDLFILES ()
+{
+    my @psources = split(/[\034\s]+/, $sources{$program});
+    my $dep_lines = "";
+    my @cppFiles = ();
+    
+    foreach $source (@psources) {
+        
+        my $skel = ($source =~ m/\.skel$/);
+        
+        if ($source =~ m/\.stub$/ || $skel) {
+            
+            my $qs = quotemeta($source);
+            $sources{$program} =~ s/$qs//;
+            $sources_changed{$program} = 1;
+            
+            print STDOUT "adding IDL file $source\n" if ($verbose);
+            
+            $source =~ s/\.(stub|skel)$//;
+            
+            my $sourcename;
+            
+            if ($skel) {
+                $sourcename = "$source\_skel";
+            } else {
+                $sourcename = "$source\_stub";
+            }
+            
+            my $sourcedir = '';
+            if (-f "$makefileDir/$source.h") {
+                $sourcedir = '$(srcdir)/';
+            } else {
+                if ($MakefileData =~ /\n$source\_DIR\s*=\s*(\S+)\n/) {
+                    $sourcedir = $1;
+                    $sourcedir .= "/" if ($sourcedir !~ /\/$/);
+                }
+            }
+            
+            if ($allidls !~ /$source\_kidl/) {
+                
+                $dep_lines .= "$source.kidl: $sourcedir$source.h \$(DCOPIDL_DEPENDENCIES)\n";
+                $dep_lines .= "\t\$(DCOPIDL) $sourcedir$source.h > $source.kidl || ( rm -f $source.kidl ; /bin/false )\n";
+                
+                $allidls .= $source . "_kidl ";
+            }
+            
+            if ($allidls !~ /$sourcename/) {
+                
+                if ($skel) {
+                    $dep_lines .= "$sourcename.$cxxsuffix: $source.kidl\n";
+                    $dep_lines .= "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-stub $source.kidl\n";
+                } else {
+                    $target_adds{"$sourcename.$cxxsuffix"} .= "$sourcename.h ";
+                    $dep_lines .= "$sourcename.h: $source.kidl\n";
+                    $dep_lines .= "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-skel $source.kidl\n";
+                }
+                
+                $allidls .= $sourcename . " ";
+            }
+            
+            $idlfiles{$program} .= $sourcename . " ";
+            
+            if ($program =~ /_la$/) {
+                $realObjs{$program} .= " $sourcename.lo";
+            } else {
+                $realObjs{$program} .= " $sourcename.\$(OBJEXT)";
+            }
+            $sources{$program} .= " $sourcename.$cxxsuffix";
+            $sources_changed{$program} = 1;
+            $important{$program} .= "$sourcename.h " if (!$skel);
+            $idl_output .= "\\\n\t$sourcename.$cxxsuffix $sourcename.h $source.kidl ";
+            push(@cleanfiles, "$sourcename.$cxxsuffix");
+            push(@cleanfiles, "$sourcename.h");
+            push(@cleanfiles, "$sourcename.kidl");
+            $dep_files .= " \$(DEPDIR)/$sourcename.P";
+        }
+    }
+    if ($dep_lines) {
+        appendLines($dep_lines);
+    }
+    
+    if (0) {
+        my $lookup = "($program)";
+        $lookup .= '(|\$\(EXEEXT\))';
+        $lookup =~ s/\_/./g;
+        $lookup .= ":(.*..$program\_OBJECTS..*)";
+        #    $lookup = quotemeta($lookup);
+        if ($MakefileData =~ /\n$lookup\n/) {
+            
+            my $line = "$1$2: ";
+            foreach $file (split(' ', $idlfiles{$program})) {
+                $line .= "$file.$cxxsuffix ";
+            }
+            $line .= $3;
+            substituteLine($lookup, $line);
+        } else {
+            print STDERR "no built dependency found $lookup\n";
+        }
+    }
+}
+
+sub tag_UIFILES ()
+{
+    my @psources = split(/[\034\s]+/, $sources{$program});
+    my $dep_lines = "";
+    my @depFiles = ();
+    
+    foreach $source (@psources) {
+
+        if ($source =~ m/\.ui$/) {
+
+            print STDERR "adding UI file $source\n" if ($verbose);
+
+            my $qs = quotemeta($source);
+            $sources{$program} =~ s/$qs//;
+            $sources_changed{$program} = 1;
+      
+            $source =~ s/\.ui$//;
+
+            my $sourcedir = '';
+            if (-f "$makefileDir/$source.ui") {
+                $sourcedir = '$(srcdir)/';
+            }
+
+            if ($alluis !~ /$source/) {
+
+                $dep_lines .= "$source.$cxxsuffix: $sourcedir$source.ui $source.h $source.moc\n";
+                $dep_lines .= "\trm -f $source.$cxxsuffix\n";
+                if (!$kdeopts{"qtonly"}) {
+                    $dep_lines .= "\techo '#include <klocale.h>' > $source.$cxxsuffix\n";
+                    $dep_lines .= "\t\$(UIC) -tr i18n -i $source.h $sourcedir$source.ui | sed -e \"s,i18n( \\\"\\\" ),QString::null,g\" >> $source.$cxxsuffix || rm -f $source.$cxxsuffix\n";
+                } else {
+                    $dep_lines .= "\t\$(UIC) -i $source.h $sourcedir$source.ui > $source.$cxxsuffix || rm -f $source.$cxxsuffix\n";
+                }
+                $dep_lines .= "\techo '#include \"$source.moc\"' >> $source.$cxxsuffix\n\n";
+                $dep_lines .= "$source.h: $sourcedir$source.ui\n";
+                $dep_lines .= "\t\$(UIC) -o $source.h $sourcedir$source.ui\n\n";
+                $dep_lines .= "$source.moc: $source.h\n";
+                $dep_lines .= "\t\$(MOC) $source.h -o $source.moc\n";
+
+                $alluis .= "$source ";
+                $depedmocs{$program} .= " $source.moc";
+                $globalmocs{$source} = "\035$source.h\035$source.cpp";
+            }
+            
+            if ($program =~ /_la$/) {
+                $realObjs{$program} .= " $source.lo";
+            } else {
+                $realObjs{$program} .= " $source.\$(OBJEXT)";
+            }
+            $sources{$program} .= " $source.$cxxsuffix";
+            $sources_changed{$program} = 1;
+            $important{$program} .= "$source.h ";
+            $ui_output .= "\\\n\t$source.$cxxsuffix $source.h $source.moc ";
+            push(@cleanfiles, "$source.$cxxsuffix");
+            push(@cleanfiles, "source.h");
+            push(@cleanfiles, "$source.moc");
+
+            $dep_files .= " \$(DEPDIR)/$source.P";
+        }
+    }
+    if ($dep_lines) {
+        appendLines($dep_lines);
+    }
+}
+
+sub tag_ICON()
+{
+    my $lookup = '([^\s]*)_ICON\s*=\s*([^\n]*)';
+    my $install = "";
+    my $uninstall = "";
+
+    while ($MakefileData =~ /\n$lookup/og) {
+        my $destdir;
+        if ($1 eq "KDE") {
+            $destdir = "kde_icondir";
+        } else {
+            $destdir = $1 . "dir";
+        }
+        my $iconauto = ($2 =~ /AUTO\s*$/);
+        my @appnames = ();
+        if ( ! $iconauto ) {
+            my @_appnames = split(" ", $2);
+            print STDOUT "KDE_ICON processing <@_appnames>\n"   if ($verbose);
+            foreach $appname (@_appnames) {
+                push(@appnames, quotemeta($appname));
+            }
+        } else {
+            print STDOUT "KDE_ICON processing <AUTO>\n"   if ($verbose);
+        }
+
+        my @files = ();
+        opendir (THISDIR, ".");
+        foreach $entry (readdir(THISDIR)) {
+            next if ($entry eq "CVS" || $entry =~ /^\./  || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/);
+            next if (! -f $entry);
+            if ( $iconauto )
+              {
+                  push(@files, $entry)
+                    if ($entry =~ /\.xpm/ || $entry =~ /\.png/);
+              } else {
+                  foreach $appname (@appnames) {
+                      push(@files, $entry)
+                        if ($entry =~ /-$appname\.xpm/ || $entry =~ /-$appname\.png/);
+                  }
+              }
+        }
+        closedir (THISDIR);
+        
+        my %directories = ();
+        
+        foreach $file (@files) {
+            my $newfile = $file;
+            my $prefix = $file;
+            $prefix =~ s/\.(png|xpm)$//;
+            my $appname = $prefix;
+            $appname =~ s/^[^-]+-// if ($appname =~ /-/) ;
+            $appname =~ s/^[^-]+-// if ($appname =~ /-/) ;
+            $appname = quotemeta($appname);
+            $prefix =~ s/$appname$//;
+            $prefix =~ s/-$//;
+            
+            $prefix = 'lo16-app' if ($prefix eq 'mini');
+            $prefix = 'lo32-app' if ($prefix eq 'lo');
+            $prefix = 'hi48-app' if ($prefix eq 'large');
+            $prefix .= '-app' if ($prefix =~ m/^...$/);
+            
+            my $type = $prefix;
+            $type =~ s/^.*-([^-]+)$/$1/;
+            $prefix =~ s/^(.*)-[^-]+$/$1/;
+            
+            my %type_hash =
+              (
+               'action' => 'actions',
+               'app' => 'apps',
+               'device' => 'devices',
+               'filesys' => 'filesystems',
+               'mime' => 'mimetypes'
+              );
+            
+            if (! defined $type_hash{$type} ) {
+                print STDERR "unknown icon type $type in $printname ($file)\n";
+                next;
+            }
+            
+            my %dir_hash =
+              (
+               'los' => 'locolor/16x16',
+               'lom' => 'locolor/32x32',
+               'him' => 'hicolor/32x32',
+               'hil' => 'hicolor/48x48',
+               'lo16' => 'locolor/16x16',
+               'lo22' => 'locolor/22x22',
+               'lo32' => 'locolor/32x32',
+               'hi16' => 'hicolor/16x16',
+               'hi22' => 'hicolor/22x22',
+               'hi32' => 'hicolor/32x32',
+               'hi48' => 'hicolor/48x48',
+               'hi64' => 'hicolor/64x64',
+               'hisc' => 'hicolor/scalable'
+              );
+            
+            $newfile =~ s@.*-($appname\.(png|xpm?))@$1@;
+            
+            if (! defined $dir_hash{$prefix}) {
+                print STDERR "unknown icon prefix $prefix in $printname\n";
+                next;
+            }
+            
+            my $dir = $dir_hash{$prefix} . "/" . $type_hash{$type};
+            if ($newfile =~ /-[^\.]/) {
+                my $tmp = $newfile;
+                $tmp =~ s/^([^-]+)-.*$/$1/;
+                $dir = $dir . "/" . $tmp;
+                $newfile =~ s/^[^-]+-//;
+            }
+            
+            if (!defined $directories{$dir}) {
+                $install .= "\t\$(mkinstalldirs) \$(DESTDIR)\$($destdir)/$dir\n";
+                $directories{$dir} = 1;
+            }
+            
+            $install .= "\t\$(INSTALL_DATA) \$(srcdir)/$file \$(DESTDIR)\$($destdir)/$dir/$newfile\n";
+            $uninstall .= "\t-rm -f \$(DESTDIR)\$($destdir)/$dir/$newfile\n";
+            
+        }
+    }
+
+    if (length($install)) {
+        $target_adds{"install-data-am"} .= "install-kde-icons ";
+        $target_adds{"uninstall-am"} .= "uninstall-kde-icons ";
+        appendLines("install-kde-icons:\n" . $install . "\nuninstall-kde-icons:\n" . $uninstall);
+    }
+}
+
+sub handle_POFILES($$)
+{
+  my @pofiles = split(" ", $_[0]);
+  my $lang = $_[1];
+
+  # Build rules for creating the gmo files
+  my $tmp = "";
+  my $allgmofiles     = "";
+  my $pofileLine   = "POFILES =";
+  foreach $pofile (@pofiles)
+    {
+        $pofile =~ /(.*)\.[^\.]*$/;          # Find name minus extension
+        $tmp .= "$1.gmo: $pofile\n";
+        $tmp .= "\trm -f $1.gmo; \$(GMSGFMT) -o $1.gmo \$(srcdir)/$pofile\n";
+        $tmp .= "\ttest ! -f $1.gmo || touch $1.gmo\n";
+        $allgmofiles .= " $1.gmo";
+        $pofileLine  .= " $1.po";
+    }
+  appendLines ($tmp);
+  my $lookup = 'POFILES\s*=([^\n]*)';
+  if ($MakefileData !~ /\n$lookup/o) {
+    appendLines("$pofileLine\nGMOFILES =$allgmofiles");
+  } else {
+    substituteLine ($lookup, "$pofileLine\nGMOFILES =$allgmofiles");
+  }
+
+    if ($allgmofiles) {
+
+        # Add the "clean" rule so that the maintainer-clean does something
+        appendLines ("clean-nls:\n\t-rm -f $allgmofiles\n");
+
+	$target_adds{"maintainer-clean"} .= "clean-nls ";
+
+	$lookup = 'DISTFILES\s*=\s*(.*)';
+	if ($MakefileData =~ /\n$lookup\n/o) {
+	  $tmp = "DISTFILES = \$(GMOFILES) \$(POFILES) $1";
+	  substituteLine ($lookup, $tmp);
+	}
+    }
+
+  $target_adds{"install-data-am"} .= "install-nls ";
+
+  $tmp = "install-nls:\n";
+  if ($lang) {
+    $tmp  .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES\n";
+  }
+  $tmp .= "\t\@for base in ";
+  foreach $pofile (@pofiles)
+    {
+      $pofile =~ /(.*)\.[^\.]*$/;          # Find name minus extension
+      $tmp .= "$1 ";
+    }
+
+  $tmp .= "; do \\\n";
+  if ($lang) {
+    $tmp .= "\t  echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n";
+    $tmp .= "\t  test ! -f \$\$base.gmo || \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"
+  } else {
+    $tmp .= "\t  echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n";
+    $tmp .= "\t  \$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES ; \\\n";
+    $tmp .= "\t  test ! -f \$\$base.gmo || \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n";
+  }
+  $tmp .= "\tdone\n\n";
+  appendLines ($tmp);
+
+  $target_adds{"uninstall"} .= "uninstall-nls ";
+
+  $tmp = "uninstall-nls:\n";
+  foreach $pofile (@pofiles)
+    {
+      $pofile =~ /(.*)\.[^\.]*$/;          # Find name minus extension
+      if ($lang) {
+	$tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/$1.mo\n";
+      } else {
+	$tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$1/LC_MESSAGES/\$(PACKAGE).mo\n";
+      }
+    }
+  appendLines($tmp);
+
+  $target_adds{"all"} .= "all-nls ";
+
+  $tmp = "all-nls: \$(GMOFILES)\n";
+
+  appendLines($tmp);
+
+  $target_adds{"distdir"} .= "distdir-nls ";
+
+  $tmp = "distdir-nls:\$(GMOFILES)\n";
+  $tmp .= "\tfor file in \$(POFILES); do \\\n";
+  $tmp .= "\t  cp \$(srcdir)/\$\$file \$(distdir); \\\n";
+  $tmp .= "\tdone\n";
+  $tmp .= "\tfor file in \$(GMOFILES); do \\\n";
+  $tmp .= "\t  cp \$(srcdir)/\$\$file \$(distdir); \\\n";
+  $tmp .= "\tdone\n";
+
+  appendLines ($tmp);
+
+  if (!$lang) {
+    appendLines("merge:\n\t\$(MAKE) -f \$(top_srcdir)/admin/Makefile.common package-merge POFILES=\"\${POFILES}\" PACKAGE=\${PACKAGE}\n\n");
+  }
+ 
+}
+
+#-----------------------------------------------------------------------------
+
+# Returns 0 if the line was processed - 1 otherwise.
+# Errors are logged in the global $errorflags
+sub tag_POFILES ()
+{
+    my $lookup = 'POFILES\s*=([^\n]*)';
+    return 1    if ($MakefileData !~ /\n$lookup/o);
+    print STDOUT "POFILES processing <$1>\n"   if ($verbose);
+
+    my $tmp = $1;
+
+    # make sure these are all gone.
+    if ($MakefileData =~ /\n\.po\.gmo:\n/)
+    {
+        print STDERR "Warning: Found old .po.gmo rules in $printname. New po rules not added\n";
+        return 1;
+    }
+
+    # Either find the pofiles in the directory (AUTO) or use
+    # only the specified po files.
+    my $pofiles = "";
+    if ($tmp =~ /^\s*AUTO\s*$/)
+    {
+        opendir (THISDIR, ".");
+	next if ($entry eq "CVS" || $entry =~ /^\./  || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^#.*#$/);
+	$pofiles =  join(" ", grep(/\.po$/, readdir(THISDIR)));
+        closedir (THISDIR);
+        print STDOUT "pofiles found = $pofiles\n"   if ($verbose);
+	if (-f "charset" && -f "kdelibs.po") {
+	    handle_TOPLEVEL();
+	}
+    }
+    else
+    {
+        $tmp =~ s/\034/ /g;
+        $pofiles = $tmp;
+    }
+    return 1    if (!$pofiles);        # Nothing to do
+
+    handle_POFILES($pofiles, $kdelang);
+
+    return 0;
+}
+
+sub helper_LOCALINSTALL($)
+{
+  my $lookup = "\n" . $_[0] . ":";
+  if ($MakefileData =~ /($lookup)/) {
+
+    my $install = $MakefileData;
+    $install =~ s/\n/\035/g;
+    $install =~ s/.*\035$_[0]:[^\035]*\035//;
+    my $emptyline = 0;
+    while (! $emptyline) {
+      if ($install =~ /([^\035]*)\035(.*)/) {
+	local $line = $1;
+	$install = $2;
+	if ($line !~ /^\s*$/ && $line !~ /^(\@.*\@)*\t/) {
+	  $emptyline = 1;
+	} else {
+	  replaceDestDir($line);
+	}
+      } else {
+	$emptyline = 1;
+      }
+    }
+  }
+
+}
+
+sub tag_LOCALINSTALL ()
+{
+  helper_LOCALINSTALL('install-exec-local');
+  helper_LOCALINSTALL('install-data-local');
+  helper_LOCALINSTALL('uninstall-local');
+
+  return 0;
+}
+
+sub replaceDestDir($) {
+  local $line = $_[0];
+
+  if (   $line =~ /^\s*(\@.*\@)*\s*\$\(mkinstalldirs\)/
+      || $line =~ /^\s*(\@.*\@)*\s*\$\(INSTALL\S*\)/
+      || $line =~ /^\s*(\@.*\@)*\s*(-?rm.*) \S*$/)
+  {
+    $line =~ s/^(.*) ([^\s]*)\s*$/$1 \$(DESTDIR)$2/ if ($line !~ /\$\(DESTDIR\)/);
+  }
+
+  if ($line ne $_[0]) {
+    $_[0] = quotemeta $_[0];
+    substituteLine($_[0], $line);
+  }
+}
+
+#---------------------------------------------------------------------------
+sub tag_CLOSURE () {
+    return if ($program !~ /_la$/);
+    
+    my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n";
+    $MakefileData =~ m/$lookup/;
+    return if ($1 !~ /CXXLINK/);
+
+    if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ &&
+        $MakefileData !~ /\n$program\_LDFLAGS\s*=.*KDE_PLUGIN/ ) {
+        print STDERR "Report: $program contains undefined in $printname\n" if ($program =~ /^lib/ && $dryrun);
+        return;
+    }
+    my $closure = $realname{$program} . ".closure";
+    my $lines = "$closure: \$($program\_OBJECTS) \$($program\_DEPENDENCIES)\n";
+    $lines .= "\t\@echo \"int main() {return 0;}\" > $program\_closure.$cxxsuffix\n";
+    $lines .= "\t\@\$\(LTCXXCOMPILE\) -c $program\_closure.$cxxsuffix\n";
+    $lines .= "\t\@\$\(CXXLINK\) $program\_closure.lo \$($program\_LDFLAGS) \$($program\_OBJECTS) \$($program\_LIBADD) \$(LIBS)\n";
+    $lines .= "\t\@rm -f $program\_closure.* $closure\n";
+    $lines .= "\t\@echo \"timestamp\" > $closure\n";
+    $lines .= "\n";
+    appendLines($lines);
+    $lookup = $realname{$program} . ": (.*)";
+    if ($MakefileData =~ /\n$lookup\n/) {
+        $lines  = "\@KDE_USE_CLOSURE_TRUE@". $realname{$program} . ": $closure $1";
+        $lines .= "\n\@KDE_USE_CLOSURE_FALSE@" . $realname{$program} . ": $1";
+        substituteLine($lookup, $lines);
+    }
+    $closure_output .= " $closure";
+}
+
+sub tag_DIST () {
+    my %foundfiles = ();
+    opendir (THISDIR, ".");
+    foreach $entry (readdir(THISDIR)) {
+        next if ($entry eq "CVS" || $entry =~ /^\./  || $entry =~ /^Makefile$$/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/);
+        next if (! -f $entry);
+        next if ($entry =~ /\.moc/ || $entry =~ /\.lo$/ || $entry =~ /\.la$/ || $entry =~ /\.o/);
+        $foundfiles{$entry} = 1;
+    }
+    closedir (THISDIR);
+
+    my @marks = ("EXTRA_DIST", "DIST_COMMON", '\S*_SOURCES', '\S*_HEADERS', 'MAINTAINERCLEANFILES', 'CLEANFILES', 'DISTCLEANFILES', '\S*_OBJECTS');
+    foreach $mark (@marks) {
+        while ($MakefileData =~ /\n($mark)\s*=\s*([^\n]*)/g) {
+            foreach $file (split('[\034\s]', $2)) {
+                $file =~ s/\.\///;
+                $foundfiles{$file} = 0 if (defined $foundfiles{$file});
+            }
+        }
+    }
+    my @files = ("Makefile", "config.cache", "config.log", "stamp-h",
+                 "stamp-h1", "stamp-h1", "config.h", "Makefile", "config.status", "config.h", "libtool");
+    foreach $file (@files) {
+        $foundfiles{$file} = 0 if (defined $foundfiles{$file});
+    }
+
+    my $KDE_DIST = "";
+    foreach $file (keys %foundfiles) {
+        if ($foundfiles{$file} == 1) {
+            $KDE_DIST .= "$file ";
+        }
+    }
+    if ($KDE_DIST) {
+        print "KDE_DIST $printname $KDE_DIST\n" if ($verbose);
+        
+        my $lookup = "DISTFILES *=(.*)";
+        if ($MakefileData =~ /\n$lookup\n/o) {
+            substituteLine($lookup, "KDE_DIST=$KDE_DIST\n\nDISTFILES=$1 \$(KDE_DIST)\n");
+        }
+    }
+}
+
+#-----------------------------------------------------------------------------
+# Returns 0 if the line was processed - 1 otherwise.
+# Errors are logged in the global $errorflags
+sub tag_DOCFILES ()
+{
+#    if ($MakefileData =~ /\nSUBDIRS\s*=/) { # subdirs
+#      $MakefileData =~ /\n(.*-recursive:\s*)\n/;
+#      my $orig_rules = $1;
+#      my $rules = $orig_rules;
+#      $rules =~ s/:\s*$//;
+#      substituteLine($orig_rules, "$rules docs-recursive:");
+#      appendLines("docs: docs-recursive docs-am\n");
+#    } else {
+#      appendLines("docs: docs-am\n");
+#    }
+    $target_adds{"all"} .= "docs-am ";
+
+    my $lookup = 'KDE_DOCS\s*=\s*([^\n]*)';
+    goto nodocs    if ($MakefileData !~ /\n$lookup/o);
+    print STDOUT "KDE_DOCS processing <$1>\n"   if ($verbose);
+
+    my $tmp = $1;
+
+    # Either find the files in the directory (AUTO) or use
+    # only the specified po files.
+    my $files = "";
+    my $appname = $tmp;
+    $appname =~ s/^(\S*)\s*.*$/$1/;
+    if ($appname =~ /AUTO/) {
+      $appname = basename($makefileDir);
+      if ("$appname" eq "en") {
+      	  print STDERR "Error: KDE_DOCS = AUTO relies on the directory name. Yours is 'en' - you most likely want something else, e.g. KDE_DOCS = myapp\n";
+          exit(1);
+      }
+    }
+
+    if ($tmp !~ / - /)
+    {
+        opendir (THISDIR, ".");
+	foreach $entry (readdir(THISDIR)) {
+	  next if ($entry eq "CVS" || $entry =~ /^\./  || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/);
+	  next if (! -f $entry);
+	  $files .= "$entry ";
+	}
+        closedir (THISDIR);
+        print STDOUT "docfiles found = $files\n"   if ($verbose);
+    }
+    else
+    {
+        $tmp =~ s/\034/ /g;
+	$tmp =~ s/^\S*\s*-\s*//;
+        $files = $tmp;
+    }
+    goto nodocs if (!$files);        # Nothing to do
+
+    if ($files =~ /(^| )index\.docbook($| )/) {
+      
+      my $lines = "";
+      my $lookup = 'MEINPROC\s*=';
+      if ($MakefileData !~ /\n($lookup)/) {
+	$lines = "MEINPROC=/\$(kde_bindir)/meinproc\n";
+      }
+      $lookup = 'KDE_XSL_STYLESHEET\s*=';
+      if ($MakefileData !~ /\n($lookup)/) {
+        $lines .= "KDE_XSL_STYLESHEET=/\$(kde_datadir)/ksgmltools2/customization/kde-chunk.xsl\n";
+      }
+      $lookup = '\nindex.cache.bz2:';
+      if ($MakefileData !~ /\n($lookup)/) {
+         $lines .= "index.cache.bz2: \$(srcdir)/index.docbook \$(KDE_XSL_STYLESHEET) $files\n";
+         $lines .= "\t\@if test -n \"\$(MEINPROC)\"; then echo \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; fi\n";
+         $lines .= "\n";
+      }
+ 
+      $lines .= "docs-am: index.cache.bz2\n";  
+      $lines .= "\n";
+      $lines .= "install-docs: docs-am install-nls\n";
+      $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n";
+      $lines .= "\t\@if test -f index.cache.bz2; then \\\n";
+      $lines .= "\techo \$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n";
+      $lines .= "\t\$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n";
+      $lines .= "\tfi\n";
+      $lines .= "\t-rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n";
+      $lines .= "\t\$(LN_S) \$(kde_libs_htmldir)/$kdelang/common \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n";
+
+      $lines .= "\n";
+      $lines .= "uninstall-docs:\n";
+      $lines .= "\t-rm -rf \$(kde_htmldir)/$kdelang/$appname\n";
+      $lines .= "\n";
+      $lines .= "clean-docs:\n";
+      $lines .= "\t-rm -f index.cache.bz2\n";
+      $lines .= "\n";
+      $target_adds{"install-data-am"} .= "install-docs ";
+      $target_adds{"uninstall"} .= "uninstall-docs ";
+      $target_adds{"clean-am"} .= "clean-docs ";
+      appendLines ($lines);
+    } else {
+      appendLines("docs-am: $files\n");
+    }
+
+    $target_adds{"install-data-am"} .= "install-nls";
+    $target_adds{"uninstall"} .= "uninstall-nls ";
+
+    $tmp = "install-nls:\n";
+    $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n";
+    $tmp .= "\t\@for base in $files; do \\\n";
+    $tmp .= "\t  echo \$(INSTALL_DATA) \$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n";
+    $tmp .= "\t  \$(INSTALL_DATA) \$(srcdir)/\$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n";
+    $tmp .= "\tdone\n";
+    if ($appname eq 'common') {
+      $tmp .= "\t\@echo \"merging common and language specific dir\" ;\\\n";
+      $tmp .= "\tif test ! -e \$(kde_htmldir)/en/common/kde-common.css; then echo 'no english docs found in \$(kde_htmldir)/en/common/'; exit 1; fi \n";
+      $tmp .= "\t\@com_files=`cd \$(kde_htmldir)/en/common && echo *` ;\\\n";
+      $tmp .= "\tcd \$(DESTDIR)\$(kde_htmldir)/$kdelang/common ;\\\n";
+      $tmp .= "\tif test -n \"\$\$com_files\"; then for p in \$\$com_files ; do \\\n";
+      $tmp .= "\t  case \" $files \" in \\\n";
+      $tmp .= "\t    *\" \$\$p \"*) ;; \\\n";
+      $tmp .= "\t    *) test ! -e \$\$p && echo \$(LN_S) ../../en/common/\$\$p \$(DESTDIR)\$(kde_htmldir)/$kdelang/common/\$\$p && \$(LN_S) ../../en/common/\$\$p \$\$p ;; \\\n";
+      $tmp .= "\t  esac ; \\\n";
+      $tmp .= "\tdone ; fi ; true\n";
+    }
+    $tmp .= "\n";
+    $tmp .= "uninstall-nls:\n";
+    $tmp .= "\tfor base in $files; do \\\n";
+    $tmp .= "\t  rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n";
+    $tmp .= "\tdone\n\n";
+    appendLines ($tmp);
+
+    $target_adds{"distdir"} .= "distdir-nls ";
+
+    $tmp = "distdir-nls:\n";
+    $tmp .= "\tfor file in $files; do \\\n";
+    $tmp .= "\t  cp \$(srcdir)/\$\$file \$(distdir); \\\n";
+    $tmp .= "\tdone\n";
+
+    appendLines ($tmp);
+
+    return 0;
+
+  nodocs:
+    appendLines("docs-am:\n");
+    return 1;
+}
+
+#-----------------------------------------------------------------------------
+# Find headers in any of the source directories specified previously, that
+# are candidates for "moc-ing".
+sub findMocCandidates ()
+{
+    my @list = ();
+    foreach $dir (@headerdirs)
+    {
+        opendir (SRCDIR, "$dir");
+        @hFiles = grep { /.+\.$hExt$/o } readdir(SRCDIR);
+        closedir SRCDIR;
+        foreach $hf (@hFiles)
+        {
+            open (HFIN, "$dir/$hf") || die "Could not open $dir/$hf: $!\n";
+            my $hfsize = 0;
+            seek(HFIN, 0, 2);
+            $hfsize = tell(HFIN);
+            seek(HFIN, 0, 0);
+            read HFIN, $hfData, $hfsize;
+            close HFIN;
+            # push (@list, $hf) if(index($hfData, "Q_OBJECT") >= 0); ### fast but doesn't handle //Q_OBJECT
+            if ( $hfData =~ /{([^}]*)Q_OBJECT/s ) {              ## handle " { friend class blah; Q_OBJECT "
+                push (@list, $hf) unless $1 =~ m://[^\n]*Q_OBJECT[^\n]*$:s;  ## handle "// Q_OBJECT"
+            }
+        }
+        # The assoc array of root of headerfile and header filename
+        foreach $hFile (@list)
+        {
+            $hFile =~ /(.*)\.[^\.]*$/;          # Find name minus extension
+            if ($mocFiles{$1})
+            {
+                print STDERR "Warning: Multiple header files found for $1\n";
+                next;                           # Use the first one
+            }
+            $mocFiles{$1} = "$dir\035$hFile";   # Add relative dir
+        }
+    }
+
+    return 0;
+}
+
+#-----------------------------------------------------------------------------
+
+# The programmer has specified a moc list. Prune out the moc candidates
+# list that we found based on looking at the header files. This generates
+# a warning if the programmer gets the list wrong, but this doesn't have
+# to be fatal here.
+sub pruneMocCandidates ($)
+{
+    my %prunedMoc = ();
+    local @mocList = split(' ', @_[0]);
+
+    foreach $mocname (@mocList)
+    {
+        $mocname =~ s/\.moc$//;
+        if ($mocFiles{$mocname})
+        {
+            $prunedMoc{$mocname} = $mocFiles{$mocname};
+        }
+        else
+        {
+            my $print = $makefileDir;
+            $print =~ s/^\Q$topdir\E\\//;
+            # They specified a moc file but we can't find a header that
+            # will generate this moc file. That's possible fatal!
+            print STDERR "Warning: No moc-able header file for $print/$mocname\n";
+        }
+    }
+
+    undef %mocFiles;
+    %mocFiles = %prunedMoc;
+}
+
+#-----------------------------------------------------------------------------
+
+# Finds the cpp files (If they exist).
+# The cpp files get appended to the header file separated by \035
+sub checkMocCandidates ()
+{
+    my @cppFiles;
+    my $cpp2moc;  # which c++ file includes which .moc files
+    my $moc2cpp;  # which moc file is included by which c++ files
+
+    return unless (keys %mocFiles);
+    opendir(THISDIR, ".") || return;
+    @cppFiles = grep { /.+\.$cppExt$/o  && !/.+\.moc\.$cppExt$/o
+                         && !/.+\.all_$cppExt\.$cppExt$/o } readdir(THISDIR);
+    closedir THISDIR;
+    return unless (@cppFiles);
+    my $files = join (" ", @cppFiles);
+    $cpp2moc = {};
+    $moc2cpp = {};
+    foreach $cxxf (@cppFiles)
+    {
+      open (CXXFIN, $cxxf) || die "Could not open $cxxf: $!\n";
+      seek(CXXFIN, 0, 2);
+      my $cxxfsize = tell(CXXFIN);
+      seek(CXXFIN, 0, 0);
+      read CXXFIN, $cxxfData, $cxxfsize;
+      close CXXFIN;
+      while(($cxxfData =~ m/^[ \t]*\#include\s*[<\"](.*\.moc)[>\"]/gm)) {
+	$cpp2moc->{$cxxf}->{$1} = 1;
+	$moc2cpp->{$1}->{$cxxf} = 1;
+      }
+    }
+    foreach my $mocFile (keys (%mocFiles))
+    {
+	@cppFiles = keys %{$moc2cpp->{"$mocFile.moc"}};
+        if (@cppFiles == 1) {
+            $mocFiles{$mocFile} .= "\035" . $cppFiles[0];
+	    push(@deped, $mocFile);
+        } elsif (@cppFiles == 0) {
+            push (@newObs, $mocFile);           # Produce new object file
+            next    if ($haveAutomocTag);       # This is expected...
+            # But this is an error we can deal with - let them know
+            print STDERR
+                "Warning: No c++ file that includes $mocFile.moc\n";
+        } else {
+            # We can't decide which file to use, so it's fatal. Although as a
+            # guess we could use the mocFile.cpp file if it's in the list???
+            print STDERR
+                "Error: Multiple c++ files that include $mocFile.moc\n";
+            print STDERR "\t",join ("\t", @cppFiles),"\n";
+            $errorflag = 1;
+            delete $mocFiles{$mocFile};
+            # Let's continue and see what happens - They have been told!
+        }
+    }
+}
+
+#-----------------------------------------------------------------------------
+
+# Add the rules for generating moc source from header files
+# For Automoc output *.moc.cpp but normally we'll output *.moc
+# (We must compile *.moc.cpp separately. *.moc files are included
+# in the appropriate *.cpp file by the programmer)
+sub addMocRules ()
+{
+    my $cppFile;
+    my $hFile;
+
+    foreach $mocFile (keys (%mocFiles))
+    {
+        undef $cppFile;
+        ($dir, $hFile, $cppFile) =  split ("\035", $mocFiles{$mocFile}, 3);
+        $dir =~ s#^\.#\$(srcdir)#;
+        if (defined ($cppFile))
+        {
+            $target_adds{"\$(srcdir)/$cppFile"} .= "$mocFile.moc ";
+            appendLines ("$mocFile.moc: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile.moc\n");
+            $cleanMoc .= " $mocFile.moc";
+        }
+        else
+        {
+            appendLines ("$mocFile$mocExt: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile$mocExt\n");
+            $cleanMoc .= " $mocFile$mocExt";
+        }
+    }
+}
+
+sub make_meta_classes ()
+{
+    return if ($kdeopts{"qtonly"});
+
+    my $cppFile;
+    my $hFile;
+    my $moc_class_headers = "";
+    foreach $program (@programs) {
+	my $mocs = "";
+	my @progsources = split(/[\s\034]+/, $sources{$program});
+	my @depmocs = split(' ', $depedmocs{$program});
+	my %shash = (), %mhash = ();
+	@shash{@progsources} = 1;  # we are only interested in the existence
+	@mhash{@depmocs} = 1;
+
+	print STDOUT "program=$program\n" if ($verbose);
+	print STDOUT "psources=[".join(' ', keys %shash)."]\n" if ($verbose);
+	print STDOUT "depmocs=[".join(' ', keys %mhash)."]\n" if ($verbose);
+	print STDOUT "globalmocs=[".join(' ', keys(%globalmocs))."]\n" if ($verbose);
+	foreach my $mocFile (keys (%globalmocs))
+	{
+	    undef $cppFile;
+	    ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3);
+	    $dir =~ s#^\.#\$(srcdir)#;
+	    if (defined ($cppFile))
+	    {
+		$mocs .= " $mocFile.moc" if exists $shash{$cppFile};
+	    }
+	    else
+	    {
+		# Bah. This is the case, if no C++ file includes the .moc
+		# file. We make a .moc.cpp file for that. Unfortunately this
+		# is not included in the %sources hash, but rather is mentioned
+		# in %depedmocs. If the user wants to use AUTO he can't just
+		# use an unspecific METAINCLUDES. Instead he must use
+		# program_METAINCLUDES. Anyway, it's not working real nicely.
+		# E.g. Its not clear what happens if user specifies two
+		# METAINCLUDES=AUTO in the same Makefile.am.
+		$mocs .= " $mocFile.moc.$cxxsuffix"
+		    if exists $mhash{$mocFile.".moc.$cxxsuffix"};
+	    }
+	}
+	if ($mocs) {
+	    print STDOUT "==> mocs=[".$mocs."]\n" if ($verbose);
+	    my $sourcename = $program."_meta_unload";
+	    my $ext = ($program =~ /_la$/) ? ".lo" : ".o";
+	    my $srcfile = $sourcename.".$cxxsuffix";
+	    my $objfile = $sourcename.$ext;
+	    $moc_class_headers .= " $srcfile";
+	    my $appl;
+	    $appl  = "$srcfile: $mocs\n";
+	    $appl .= "\t\@echo 'creating $srcfile'\n";
+	    $appl .= "\t\@-rm -f $srcfile\n";
+	    $appl .= "\t\@echo 'static const char * _metalist_$program\[\] = {' > $srcfile\n";
+	    $appl .= "\t\@cat $mocs | grep 'char.*className' | ";
+	    $appl .=  "sed -e 's/.*[^A-Za-z0-9_:]\\([A-Za-z0-9_:]*\\)::className.*\$\$/\\\"\\1\\\",/' | sort | uniq >> $srcfile\n";
+	    $appl .= "\t\@echo '0};' >> $srcfile\n";
+	    $appl .= "\t\@echo '#include <kunload.h>' >> $srcfile\n";
+	    $appl .= "\t\@echo '_UNLOAD($program)' >> $srcfile\n";
+		$appl .= "\n";
+	    
+	    $realObjs{$program} .= " \034" . $objfile . " ";
+	    $sources{$program} .= " $srcfile";
+            $sources_changed{$program} = 1;
+            $dep_files .= " \$(DEPDIR)/$sourcename.P";
+	    appendLines ($appl);
+	}
+	print STDOUT "\n" if $verbose;
+    }
+    if ($moc_class_headers) {
+        appendLines ("$cleantarget-moc-classes:\n\t-rm -f $moc_class_headers\n");
+        $target_adds{"$cleantarget-am"} .= "$cleantarget-moc-classes ";
+    }
+}
+
+#-----------------------------------------------------------------------------
+
+sub updateMakefile ()
+{
+    return if ($dryrun);
+
+    open (FILEOUT, "> $makefile")
+                        || die "Could not create $makefile: $!\n";
+
+    print FILEOUT "\# $progId - " . '$Revision$ '  . "\n";
+    $MakefileData =~ s/\034/\\\n/g;    # Restore continuation lines
+    print FILEOUT $MakefileData;
+    close FILEOUT;
+}
+
+#-----------------------------------------------------------------------------
+
+# The given line needs to be removed from the makefile
+# Do this by adding the special "removed line" comment at the line start.
+sub removeLine ($$)
+{
+    my ($lookup, $old) = @_;
+
+    $old =~ s/\034/\\\n#>- /g;          # Fix continuation lines
+    $MakefileData =~ s/\n$lookup/\n#>\- $old/;
+}
+
+#-----------------------------------------------------------------------------
+
+# Replaces the old line with the new line
+# old line(s) are retained but tagged as removed. The new line(s) have the
+# "added" tag placed before it.
+sub substituteLine ($$)
+{
+    my ($lookup, $new) = @_;
+
+    if ($MakefileData =~ /\n($lookup)/) {
+      $old = $1;
+      $old =~ s/\034/\\\n#>\- /g;         # Fix continuation lines
+      $new =~ s/\034/\\\n/g;
+      my $newCount = ($new =~ tr/\n//) + 1;
+      $MakefileData =~ s/\n$lookup/\n#>- $old\n#>\+ $newCount\n$new/;
+    } else {
+      print STDERR "Warning: substitution of \"$lookup\" in $printname failed\n";
+    }
+}
+
+#-----------------------------------------------------------------------------
+
+# Slap new lines on the back of the file.
+sub appendLines ($)
+{
+  my ($new) = @_;
+  $new =~ s/\034/\\\n/g;        # Fix continuation lines
+  my $newCount = ($new =~ tr/\n//) + 1;
+  $MakefileData .= "\n#>\+ $newCount\n$new";
+}
+
+#-----------------------------------------------------------------------------
+
+# Restore the Makefile.in to the state it was before we fiddled with it
+sub restoreMakefile ()
+{
+    $MakefileData =~ s/# $progId[^\n\034]*[\n\034]*//g;
+    # Restore removed lines
+    $MakefileData =~ s/([\n\034])#>\- /$1/g;
+    # Remove added lines
+    while ($MakefileData =~ /[\n\034]#>\+ ([^\n\034]*)/)
+    {
+        my $newCount = $1;
+        my $removeLines = "";
+        while ($newCount--) {
+            $removeLines .= "[^\n\034]*([\n\034]|)";
+        }
+        $MakefileData =~ s/[\n\034]#>\+.*[\n\034]$removeLines/\n/;
+    }
+}
+
+#-----------------------------------------------------------------------------
diff --git a/krozat/admin/am_edit.py b/krozat/admin/am_edit.py
new file mode 100644
index 0000000..1977241
--- /dev/null
+++ b/krozat/admin/am_edit.py
@@ -0,0 +1,330 @@
+import getopt, string, posixpath, sys, os, os.path, re
+
+# Some global globals...
+verbose     = 0
+thisProg    = posixpath.basename(sys.argv[0])
+if not thisProg: # happy only when running in xemacs ;/
+    thisProg = 'am_edit.py'
+cppsuffixes = ['cpp', 'cc', 'cxx', 'C', 'c++']
+hExt        = ['h', 'H', 'hh', 'hxx', 'h++']
+progId      = "KDE tags expanded automatically by " + thisProg
+use_final   = 1
+dryrun      = 0
+pathoption  = 0
+topdir      = os.path.abspath(os.curdir) + "/"
+foreigndirs = []
+
+class Makefile:
+    def __init__(self, file):
+        # some useful globals for the subroutines called here
+        self.headerdirs = ['.']
+        self.haveAutomocTag   = 0
+
+        self.programs = []
+
+        # lists the objects compiled into $program
+        self.realobjs = {}
+        # lists the sources used for $program
+        self.sources = {}
+        # lists the objects compiled when final
+        self.finalObjs = {}
+        # the binary name of program variable
+        self.realname = {}
+        # lists the idl files used for $program
+        self.idlfiles = {}
+        # lists all idl generated files for cleantarget
+        self.idl_output = ""
+
+        self.depedmocs = {}
+
+        self.dep_files      = ""
+        self.dep_finals     = ""
+        # the targets to add
+        self.target_adds    = {}
+        self.kdelang        = ""
+        self.makefile       = file
+        self.makefileDir    = os.path.dirname(self.makefile)
+        self.options        = {}
+
+
+    NoMakefileAmFound = "found Makefile.in without Makefile.am"
+
+    def findLine(self, line):
+        import types
+        if type(line) is types.StringType:
+            regexp = re.compile(line)
+        else:
+            regexp = line
+        for line in self.lines:
+            match = regexp.match(line)
+            if match:
+                return match
+    
+    def substituteLine(self, old, new):
+        import types
+        if type(old) is types.StringType:
+            regexp = re.compile(old)
+        else:
+            regexp = old
+            
+        for index in range(len(self.lines)):
+            line = self.lines[index]
+            match = regexp.match(line)
+            if match:
+                line = '#>- ' + line
+                newlines = string.split(new, '\n')
+                self.lines[index:index+1] = [line, '#>+ %d' % len(newlines)] + newlines
+                return
+
+    def addTarget(self, target, dependson):
+        if not self.target_adds.has_key(target):
+            self.target_adds[target] = [dependson]
+        else:
+            self.target_adds[target].append(dependson)
+            
+    def appendLines(self, newlines):
+        lines = string.split(newlines, '\n') + ['\n']
+        self.lines.extend(['#>+ %d' % len(lines)] + lines)
+        
+    def restore(self):
+        index = 0
+        while index < len(self.lines):
+            line = self.lines[index]
+            if line[0:3] == '#>+':
+                # the +1 is the comment itself
+                linec = string.atoi(line[3:]) + 1
+                del self.lines[index:index+linec]
+                continue
+            if line[0:3] == '#>-':
+                self.lines[index] = self.lines[index][4:]
+            index = index + 1
+        
+    def initialize(self):
+        global foreigndirs
+
+        os.chdir(self.makefileDir)
+        self.printname = string.replace(self.makefile, topdir, "")
+        self.makefile = os.path.basename(self.makefile)
+
+        if not posixpath.exists("Makefile.am"):
+            raise self.NoMakefileAmFound, self.makefileDir
+
+        for dir in foreigndirs:
+            if dir.match(self.makefileDir):
+                print 'leaving ' + self.makefileDir
+                return 0
+
+        f = open(self.makefile)
+        self.lines = []
+      
+        while 1:
+            line = f.readline()
+            if not line: break
+            self.lines.append(string.rstrip(line))
+
+        f.close()
+        
+        # take out the 
+        self.restore()
+        
+        optionline = re.compile('^\s*(\w+)\s*=\s*([^\n]*)$')
+        linecontinued = re.compile('\\\s*\n')
+        lastline = ''
+
+        index = 0
+        while index < len(self.lines):
+            line = self.lines[index]
+            if linecontinued.search(line):
+                self.lines[index] = linecontinued.sub(' ', line) + self.lines[index+1]
+                continue
+            else:
+                index = index + 1
+
+            match = optionline.search(line)
+            if match:
+                self.options[match.group(1)] = match.group(2)
+
+        if self.options.has_key('KDE_OPTIONS'):
+            options = string.split(self.options['KDE_OPTIONS'])
+            if 'foreign' in options:
+                foreigndirs.append(re.compile(self.makefileDir + "/.*"))
+                return 0
+
+        self.cxxsuffix = ""
+        suffixes = re.compile('^\.SUFFIXES:(.*)$')
+
+        for line in self.lines:
+            match = suffixes.match(line)
+            if match:
+                existing_suffixes = string.split(match.group(1))
+                for suffix in existing_suffixes:
+                    # leave out the .
+                    if suffix[1:] in cppsuffixes:
+                        self.cxxsuffix = suffix[1:]
+                        break
+                if self.cxxsuffix:
+                    break
+
+        search_real_programs = {}
+
+        for option in self.options.keys():
+            if string.rfind(option, '_OBJECTS') > 0:
+
+                program = option[0:string.find(option, '_OBJECTS')]
+                objs = self.options[option]
+
+                variable_in_objects = 0
+
+                objlist = string.split(objs)
+                variable = re.compile('\$\((\w+)\)')
+                for obj in objlist:
+                    match = variable.match(obj)
+                    if match and not match.group(1) == 'OBJEXT':
+                        variable_in_objects = 1
+                        break
+
+                if variable_in_objects:
+                    continue
+
+                if len(program) > 3 and program[3] == 'am_':
+                    program = program[3:]
+
+                if verbose:
+                    print "found program " + program
+
+                self.programs.append(program)
+                self.realobjs[program] = objs
+
+                if self.options.has_key(program + "_SOURCES"):
+                    self.sources[program] = self.options[program + "_SOURCES"]
+                else:
+                    self.sources[program] = ""
+                    sys.stderr.write("found program with no _SOURCES: " + program + '\n')
+
+                # unmask to regexp
+                realprogram = string.replace(program, '_', '.')
+                search_real_programs[program] = re.compile('.*(' + realprogram +
+                                                           ')(\$\(EXEEXT\)?)?:.*\$\(' +
+                                                           program + '_OBJECTS\).*')
+
+                self.realname[program] = "";
+
+        for line in self.lines:
+            if string.find(line, '_OBJECTS') > 0: # just a random piece to not use at _every_ line
+                for program in self.programs:
+                    match = search_real_programs[program].match(line)
+                    if match:
+                        self.realname[program] = match.group(1)
+
+    def finalTouch(self):
+        if self.options.has_key('DEPDIR'):
+            sys.stderr.write(self.printname + " defines DEPDIR. This means you're using automake > 1.4 - this is not supported!")
+        else:
+            # taken out a random variable
+            self.substituteLine('bindir\s*=.*', 'DEPDIR = .deps\nbindir = ' + self.options['bindir'])
+
+        self.appendLines('cvs-clean:\n' +
+                         '\t$(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean')
+
+        self.appendLines('kde-rpo-clean:\n'+
+                         '\t-rm -f *.rpo')
+
+        self.addTarget('clean', 'kde-rpo-clean')
+        self.addAllTargets()
+
+    def addAllTargets(self):
+        for target in self.target_adds.keys():
+            match = self.findLine(target + ':\s*(.*)')
+            if match:
+                self.substituteLine(match.re, target + ': ' +
+                                    string.join(self.target_adds[target]) +
+                                    ' ' + match.group(1))
+                    
+    def writeback(self):
+        f = open(self.makefile, 'w')
+        for line in self.lines:
+            f.write(line)
+            f.write('\n')
+        f.close()
+
+    def tag_automake(self):
+        match = self.findLine('^(.*cd \$\(top_srcdir\)\s+&&\s+\$\(AUTOMAKE\).*)$')
+        if not match: return 1
+        self.substituteLine(match.re, match.group(1) + '\n' +
+                       '\tcd $(top_srcdir) && python ' +
+                       thisProg + ' ' + self.printname)
+        
+def main():
+    global use_final, dryrun, pathoption, thisProg, verbose
+
+    optlist, makefiles = getopt.getopt(sys.argv[1:], 'vhp:n', [
+        'version', 'verbose', 'path=', 'help', 'no-final'])
+
+    for option, param in optlist:
+        if option == '--version':
+            print "\n"
+            print thisProg + "$Revision$"
+            print "This is really free software, unencumbered by the GPL."
+            print "You can do anything you like with it except sueing me."
+            print "Copyright 1998 Kalle Dalheimer <kalle\@kde.org>"
+            print "Concept, design and unnecessary questions about perl"
+            print "     by Matthias Ettrich <ettrich\@kde.org>"
+            print ""
+            print "Making it useful by Stephan Kulow <coolo\@kde.org> and"
+            print "Harri Porten <porten\@kde.org>"
+            print "Updated (Feb-1999), John Birch <jb.nz\@writeme.com>"
+            print "Current Maintainer Stephan Kulow"
+            sys.exit(0)
+        if option == '--verbose' or option == '-v':
+            verbose = 1
+        if option == '-p' or option == '--path':
+            thisProg = param + "/" + thisProg
+            if (not posixpath.exists(thisProg)):
+                sys.stderr.write(thisProg + " doesn't exist\n")
+            pathoption=1
+        if option == '--help' or option == '-h':
+            print "Usage " + thisProg + " [OPTION] ... [dir/Makefile.in]..."
+            print "Patches dir/Makefile.in generated from automake"
+            print "(where dir can be a full or relative directory name)"
+            print "  -v, --verbose      verbosely list files processed"
+            print "  -h, --help         print this help, then exit"
+            print "  --version          print version number, then exit"
+            print "  -p, --path=        use the path to am_edit if the path"
+            print "  --no-final         don't patch for --enable-final"
+            print "                     called from is not the one to be used"
+            sys.exit(0)
+        if option == '--no-final':
+            use_final = 0
+        if option == '-n':
+            dryrun = 1
+
+    if not use_final:
+        thisProg = thisProg + " --no-final"
+
+    if thisProg[0] == '/' and not pathoption:
+        sys.stderr.write( "Illegal full pathname call performed...\n"
+                          "The call to \"" + thisProg + "\"\n"
+                          "would be inserted in some Makefile.in.\n"
+                          "Please use option --path.\n")
+        sys.exit(1)
+
+    if len(makefiles) == 0:
+        import find
+        makefiles = find.find('Makefile.in')
+
+    for index in range(len(makefiles)):
+        if not makefiles[index][0] == '/':
+            makefiles[index] = os.path.normcase(os.path.abspath(makefiles[index]))
+
+    makefiles.sort()
+    for file in makefiles:
+        makefile = Makefile(file)
+        try:
+            makefile.initialize()
+            makefile.tag_automake()
+            makefile.finalTouch()
+            makefile.writeback()
+        except Makefile.NoMakefileAmFound, param:
+            if verbose: print Makefile.NoMakefileAmFound + ' in ' + param
+
+main()
diff --git a/krozat/admin/conf.change.pl b/krozat/admin/conf.change.pl
new file mode 100644
index 0000000..7793be4
--- /dev/null
+++ b/krozat/admin/conf.change.pl
@@ -0,0 +1,123 @@
+#!/usr/bin/perl -w
+
+# this script patches a config.status file, to use our own perl script
+# in the main loop
+# we do it this way to circumvent hacking (and thereby including)
+# autoconf function (which are GPL) into our LGPL acinclude.m4.in
+# written by Michael Matz <matz@ifh.de>
+
+# we have to change two places
+# 1. the splitting of the substitutions into chunks of 90 (or even 48 in
+#    later autoconf's
+# 2. the big main loop which patches all Makefile.in's
+use File::Basename;
+
+my $ac_aux_dir = dirname($0);
+my ($flag);
+my $ac_version = 0;
+my $vpath_seen = 0;
+$flag = 0;
+
+while (<>) {
+# usage of $flag: 0 -- we have seen nothing yet
+#   1 -- we are in (1)
+#   2 -- we have ended (1)
+#   3 -- we are in (2)
+#   4 -- we ended (2)
+
+    if ($flag == 4) {
+        print;
+    } elsif ($flag == 0) {
+# 1. begins with (including): "ac_max_sed_\S+\s*=\s*[0-9]+..."
+#    ends with (excluding) "CONFIG_FILE=..."
+#    in later autoconf (2.14.1) there is no CONFIG_FILES= line,
+#    but instead the (2) directly follow (1)
+        if (/^\s*ac_max_sed_([a-z]+).*=\s*([0-9]+)/ ) {
+	    $flag = 1;
+	    if ($1 eq 'lines') {
+                # lets hope its different with 2141, 
+                # wasn't able to verify that
+              if ($2 eq '48') {
+                $ac_version = 250;
+              }
+              else {
+	        $ac_version = 2141;
+              }
+	    } elsif ($1 eq 'cmds') {
+	        $ac_version = 213;
+	    }
+	    # hmm, we don't know the autoconf version, but we try anyway
+	} else {
+	    print;
+	}
+    } elsif ($flag == 1) {
+        if (/^\s*CONFIG_FILES=/ && ($ac_version != 250)) {
+	     print;
+	     $flag = 2;
+	} elsif (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
+	     $flag = 3;
+	}
+    } elsif ($flag == 2) {
+# 2. begins with: "for ac_file in.*CONFIG_FILES"  (the next 'for' after (1))
+#    end with: "rm -f conftest.s\*"
+# on autoconf 250, it ends with '# CONFIG_HEADER section'
+	if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
+	    $flag = 3;
+	} else {
+	    print;
+	}
+    } elsif ($flag == 3) {
+        if (/^\s*rm\s+-f\s+conftest/ ) {
+	    $flag = 4;
+	    insert_main_loop();
+	} elsif (/^\s*rm\s+-f\s+.*ac_cs_root/ ) {
+	    $flag = 4;
+	    insert_main_loop();
+	    #die "hhhhhhh";
+	    if ($ac_version != 2141) {
+	        print STDERR "hmm, don't know autoconf version\n";
+	    }
+        } elsif (/^\#\s*CONFIG_HEADER section.*/) {
+          $flag = 4;
+          insert_main_loop();
+          if($ac_version != 250) {
+            print STDERR "hmm, something went wrong :-(\n";
+          }
+	} elsif (/VPATH/ ) {
+	    $vpath_seen = 1;
+	}
+    }
+}
+
+die "wrong input (flag != 4)" unless $flag == 4;
+print STDERR "hmm, don't know autoconf version\n" unless $ac_version;
+die "autoconf 2.50 is currently not supported" if  $ac_version == 250;
+
+sub insert_main_loop {
+    print <<EOF;
+#echo Doing the fast build of Makefiles -- autoconf $ac_version
+if test "x\$ac_cs_root" = "x" ; then
+    ac_cs_root=conftest
+fi
+EOF
+    if ($vpath_seen) {
+        print <<EOF;
+# VPATH subst was seen in original config.status main loop
+echo '/^[ 	]*VPATH[ 	]*=[^:]*\$/d' >> \$ac_cs_root.subs
+EOF
+    }
+    print <<EOF;
+rm -f \$ac_cs_root.sacfiles
+for ac_file in .. \$CONFIG_FILES ; do
+    if test "x\$ac_file" != x..; then
+        echo \$ac_file >> \$ac_cs_root.sacfiles
+    fi
+done
+if test -f \$ac_cs_root.sacfiles ; then
+    perl $ac_aux_dir/config.pl "\$ac_cs_root" "\$ac_given_srcdir" "\$ac_given_INSTALL"
+fi
+rm -f \$ac_cs_root.s*
+
+EOF
+    return;
+}
diff --git a/krozat/admin/config.guess b/krozat/admin/config.guess
new file mode 100755
index 0000000..378eab8
--- /dev/null
+++ b/krozat/admin/config.guess
@@ -0,0 +1,1368 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+#   Free Software Foundation, Inc.
+
+timestamp='2001-03-30'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner@cygnus.com>.
+# Please send patches to <config-patches@gnu.org>.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit 0 ;;
+    --version | -v )
+       echo "$version" ; exit 0 ;;
+    --help | --h* | -h )
+       echo "$usage"; exit 0 ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+
+dummy=dummy-$$
+trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script.
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int dummy(){}" > $dummy.c
+	for c in cc gcc c89 ; do
+	  ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1
+	  if test $? = 0 ; then
+	     CC_FOR_BUILD="$c"; break
+	  fi
+	done
+	rm -f $dummy.c $dummy.o $dummy.rel
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 8/24/94.)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# Netbsd (nbsd) targets should (where applicable) match one or
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	# Determine the machine/vendor (is the vendor relevant).
+	case "${UNAME_MACHINE}" in
+	    amiga) machine=m68k-unknown ;;
+	    arm32) machine=arm-unknown ;;
+	    atari*) machine=m68k-atari ;;
+	    sun3*) machine=m68k-sun ;;
+	    mac68k) machine=m68k-apple ;;
+	    macppc) machine=powerpc-apple ;;
+	    hp3[0-9][05]) machine=m68k-hp ;;
+	    ibmrt|romp-ibm) machine=romp-ibm ;;
+	    *) machine=${UNAME_MACHINE}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE}" in
+	    i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep __ELF__ >/dev/null
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+	        os=netbsd
+		;;
+	esac
+	# The OS release
+	release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit 0 ;;
+    alpha:OSF1:*:*)
+	if test $UNAME_RELEASE = "V4.0"; then
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+	fi
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	cat <<EOF >$dummy.s
+	.data
+\$Lformat:
+	.byte 37,100,45,37,120,10,0	# "%d-%x\n"
+
+	.text
+	.globl main
+	.align 4
+	.ent main
+main:
+	.frame \$30,16,\$26,0
+	ldgp \$29,0(\$27)
+	.prologue 1
+	.long 0x47e03d80 # implver \$0
+	lda \$2,-1
+	.long 0x47e20c21 # amask \$2,\$1
+	lda \$16,\$Lformat
+	mov \$0,\$17
+	not \$1,\$18
+	jsr \$26,printf
+	ldgp \$29,0(\$26)
+	mov 0,\$16
+	jsr \$26,exit
+	.end main
+EOF
+	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+	if test "$?" = 0 ; then
+		case `./$dummy` in
+			0-0)
+				UNAME_MACHINE="alpha"
+				;;
+			1-0)
+				UNAME_MACHINE="alphaev5"
+				;;
+			1-1)
+				UNAME_MACHINE="alphaev56"
+				;;
+			1-101)
+				UNAME_MACHINE="alphapca56"
+				;;
+			2-303)
+				UNAME_MACHINE="alphaev6"
+				;;
+			2-307)
+				UNAME_MACHINE="alphaev67"
+				;;
+		esac
+	fi
+	rm -f $dummy.s $dummy
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit 0 ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit 0 ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit 0 ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit 0;;
+    amiga:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit 0 ;;
+    arc64:OpenBSD:*:*)
+	echo mips64el-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hkmips:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    pmax:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sgi:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit 0 ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit 0;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit 0;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit 0 ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit 0 ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    i86pc:SunOS:5.*:*)
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit 0 ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit 0 ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit 0 ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit 0 ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit 0 ;;
+    sun3*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme88k:OpenBSD:*:*)
+	echo m88k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit 0 ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit 0 ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit 0 ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD $dummy.c -o $dummy \
+	  && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+	  && rm -f $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit 0 ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit 0 ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit 0 ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit 0 ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+ 	exit 0 ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit 0 ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit 0 ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit 0 ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit 0 ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
+	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+    i?86:AIX:*:*)
+	echo i386-ibm-aix
+	exit 0 ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit 0 ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
+		rm -f $dummy.c $dummy
+		echo rs6000-ibm-aix3.2.5
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit 0 ;;
+    *:AIX:*:[45])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit 0 ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit 0 ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit 0 ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit 0 ;;                           # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit 0 ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit 0 ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit 0 ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit 0 ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+              case "${HPUX_REV}" in
+                11.[0-9][0-9])
+                  if [ -x /usr/bin/getconf ]; then
+                    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                    case "${sc_cpu_version}" in
+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+                      532)                      # CPU_PA_RISC2_0
+                        case "${sc_kernel_bits}" in
+                          32) HP_ARCH="hppa2.0n" ;;
+                          64) HP_ARCH="hppa2.0w" ;;
+                        esac ;;
+                    esac
+                  fi ;;
+              esac
+              if [ "${HP_ARCH}" = "" ]; then
+              sed 's/^              //' << EOF >$dummy.c
+
+              #define _HPUX_SOURCE
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
+EOF
+	(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+	if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
+	rm -f $dummy.c $dummy
+	fi ;;
+	esac
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit 0 ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit 0 ;;
+    3050*:HI-UX:*:*)
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
+	echo unknown-hitachi-hiuxwe2
+	exit 0 ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit 0 ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit 0 ;;
+    *9??*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit 0 ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit 0 ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit 0 ;;
+    i?86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit 0 ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit 0 ;;
+    hppa*:OpenBSD:*:*)
+	echo hppa-unknown-openbsd
+	exit 0 ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit 0 ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit 0 ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit 0 ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit 0 ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit 0 ;;
+    CRAY*X-MP:*:*:*)
+	echo xmp-cray-unicos
+        exit 0 ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE}
+	exit 0 ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+	exit 0 ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*T3D:*:*:*)
+	echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY-2:*:*:*)
+	echo cray2-cray-unicos
+        exit 0 ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit 0 ;;
+    hp300:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    i?86:BSD/386:*:* | i?86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:FreeBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit 0 ;;
+    *:OpenBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	exit 0 ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit 0 ;;
+    i*:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit 0 ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit 0 ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i386-pc-interix
+	exit 0 ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit 0 ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit 0 ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    *:GNU:*:*)
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit 0 ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit 0 ;;
+    arm*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux
+	exit 0 ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
+    mips:Linux:*:*)
+	cat >$dummy.c <<EOF
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+int main (int argc, char *argv[]) {
+#else
+int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __MIPSEB__
+  printf ("%s-unknown-linux-gnu\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+  printf ("%sel-unknown-linux-gnu\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
+	;;
+    ppc:Linux:*:*)
+	# Determine Lib Version
+	cat >$dummy.c <<EOF
+#include <features.h>
+#if defined(__GLIBC__)
+extern char __libc_version[];
+extern char __libc_release[];
+#endif
+main(argc, argv)
+     int argc;
+     char *argv[];
+{
+#if defined(__GLIBC__)
+  printf("%s %s\n", __libc_version, __libc_release);
+#else
+  printf("unknown\n");
+#endif
+  return 0;
+}
+EOF
+	LIBC=""
+	$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
+	if test "$?" = 0 ; then
+		./$dummy | grep 1\.99 > /dev/null
+		if test "$?" = 0 ; then LIBC="libc1" ; fi
+	fi
+	rm -f $dummy.c $dummy
+	echo powerpc-unknown-linux-gnu${LIBC}
+	exit 0 ;;
+    alpha:Linux:*:*)
+	cat <<EOF >$dummy.s
+	  .data
+	  \$Lformat:
+		.byte 37,100,45,37,120,10,0	# "%d-%x\n"
+	   .text
+		.globl main
+		.align 4
+		.ent main
+	    main:
+		.frame \$30,16,\$26,0
+		ldgp \$29,0(\$27)
+		.prologue 1
+		.long 0x47e03d80 # implver \$0
+		lda \$2,-1
+		.long 0x47e20c21 # amask \$2,\$1
+		lda \$16,\$Lformat
+		mov \$0,\$17
+		not \$1,\$18
+		jsr \$26,printf
+		ldgp \$29,0(\$26)
+		mov 0,\$16
+		jsr \$26,exit
+		.end main
+EOF
+	LIBC=""
+	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+	if test "$?" = 0 ; then
+		case `./$dummy` in
+		0-0)	UNAME_MACHINE="alpha" ;;
+		1-0)	UNAME_MACHINE="alphaev5" ;;
+		1-1)    UNAME_MACHINE="alphaev56" ;;
+		1-101)	UNAME_MACHINE="alphapca56" ;;
+		2-303)	UNAME_MACHINE="alphaev6" ;;
+		2-307)	UNAME_MACHINE="alphaev67" ;;
+		esac
+		objdump --private-headers $dummy | \
+		  grep ld.so.1 > /dev/null
+		if test "$?" = 0 ; then
+			LIBC="libc1"
+		fi
+	fi
+	rm -f $dummy.s $dummy
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit 0 ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
+	esac
+	exit 0 ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit 0 ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit 0 ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
+    x86_64:Linux:*:*)
+	echo x86_64-unknown-linux-gnu
+	exit 0 ;;
+    i?86:Linux:*:*)
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us. cd to the root directory to prevent
+	# problems with other programs or directories called `ld' in the path.
+	ld_supported_emulations=`cd /; ld --help 2>&1 \
+			 | sed -ne '/supported emulations:/!d
+				    s/[ 	][ 	]*/ /g
+				    s/.*supported emulations: *//
+				    s/ .*//
+				    p'`
+        case "$ld_supported_emulations" in
+	  i?86linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit 0
+		;;
+	  elf_i?86)
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		;;
+	  i?86coff)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit 0
+		;;
+	esac
+	# Either a pre-BFD a.out linker (linux-gnuoldld)
+	# or one that does not give us useful --help.
+	# GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+	# If ld does not provide *any* "supported emulations:"
+	# that means it is gnuoldld.
+	test -z "$ld_supported_emulations" && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+	case "${UNAME_MACHINE}" in
+	i?86)
+	  VENDOR=pc;
+	  ;;
+	*)
+	  VENDOR=unknown;
+	  ;;
+	esac
+	# Determine whether the default compiler is a.out or elf
+	cat >$dummy.c <<EOF
+#include <features.h>
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __ELF__
+# ifdef __GLIBC__
+#  if __GLIBC__ >= 2
+    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+#  else
+    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+#  endif
+# else
+   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+#else
+  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
+	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+	;;
+# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
+# are messed up and put the nodename in both sysname and nodename.
+    i?86:DYNIX/ptx:4*:*)
+	echo i386-sequent-sysv4
+	exit 0 ;;
+    i?86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit 0 ;;
+    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit 0 ;;
+    i?86:*:5:7*)
+        # Fixed at (any) Pentium or better
+        UNAME_MACHINE=i586
+        if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
+	    echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
+	else
+	    echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+	fi
+	exit 0 ;;
+    i?86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit 0 ;;
+    i?86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit 0 ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+	echo i386-pc-msdosdjgpp
+        exit 0 ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit 0 ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit 0 ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit 0 ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit 0 ;;
+    M68*:*:R3V[567]*:*)
+	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && echo i486-ncr-sysv4 && exit 0 ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit 0 ;;
+    i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:* | i?86:LynxOS:4.0*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit 0 ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit 0 ;;
+    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                           # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit 0 ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit 0 ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit 0 ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit 0 ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit 0 ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit 0 ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit 0 ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit 0 ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit 0 ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:Darwin:*:*)
+	echo `uname -p`-apple-darwin${UNAME_RELEASE}
+	exit 0 ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	if test "${UNAME_MACHINE}" = "x86pc"; then
+		UNAME_MACHINE=pc
+	fi
+	echo `uname -p`-${UNAME_MACHINE}-nto-qnx
+	exit 0 ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit 0 ;;
+    NSR-[KW]:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit 0 ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit 0 ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit 0 ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit 0 ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit 0 ;;
+    i?86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit 0 ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit 0 ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit 0 ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit 0 ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit 0 ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit 0 ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0
+rm -f $dummy.c $dummy
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit 0 ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit 0 ;;
+    c34*)
+	echo c34-convex-bsd
+	exit 0 ;;
+    c38*)
+	echo c38-convex-bsd
+	exit 0 ;;
+    c4*)
+	echo c4-convex-bsd
+	exit 0 ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+    ftp://ftp.gnu.org/pub/gnu/config/
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/krozat/admin/config.pl b/krozat/admin/config.pl
new file mode 100644
index 0000000..011cd25
--- /dev/null
+++ b/krozat/admin/config.pl
@@ -0,0 +1,210 @@
+#!/usr/bin/perl
+# a script for use by autoconf to make the Makefiles
+# from the Makefile.in's
+#
+# the original autoconf mechanism first splits all substitutions into groups
+# of ca. 90, and than invokes sed for _every_ Makefile.in and every group
+# (so around 2-3 times per Makefile.in). So this takes forever, as sed
+# has to recompile the regexps every time.
+#
+# this script does better. It changes all Makefile.ins in one process.
+# in kdelibs the time for building Makefile went down from 2:59 min to 13 sec!
+#
+# written by Michael Matz <matz@ifh.de>
+#
+# the first part was done by looking at the config.status files generated
+# by configure.
+# 
+my $ac_cs_root=$ARGV[0];
+my $ac_given_srcdir=$ARGV[1];
+my $ac_given_INSTALL=$ARGV[2];
+
+# print "ac_cs_root=$ac_cs_root\n";
+# print "ac_given_srcdir=$ac_given_srcdir\n";
+# print "ac_given_INSTALL=$ac_given_INSTALL\n";
+
+my ($srcdir, $top_srcdir);
+my $INSTALL;
+my $bad_perl = ($] < 5.005);
+
+open(CF, "< $ac_cs_root.subs") || die "can't open $ac_cs_root.subs: $!";
+my @subs = <CF>;
+close(CF);
+chomp @subs;
+@comp_match=();
+@comp_subs=();
+
+if ($bad_perl) {
+    print "Using perl older than version 5.005\n";
+    foreach my $pat (@subs) {
+	if (  ($pat =~ /s%([^%]*)%([^%]*)%g/ )
+	   || ($pat =~ m%/([^/]*)/([^/]*)/g% )
+	   || ($pat =~ /s%([^%]*)%([^%]*)%;t/ )
+	   || ($pat =~ m%/([^/]*)/([^/]*)/;t% )
+	   ) {
+            # form : s%bla%blubb%g
+	    # or     s%bla%blubb%;t t   (newer autoconf)
+	    push @comp_subs, make_closure($1, $2);
+	} elsif ( ($pat =~ /%([^%]*)%d/ )
+	   || ($pat =~ m%/([^/]*)/d% )
+	   ) {
+	    push @comp_subs, make_closure($1, "");
+	} else {
+	    die "Uhh. Malformed pattern in $ac_cs_root.subs ($pat)"
+		unless ( $pat =~ /^\s*$/ );   # ignore white lines
+	}
+    }
+} else {
+    foreach my $pat (@subs) {
+	if (  ($pat =~ /s%([^%]*)%([^%]*)%g/ )
+	   || ($pat =~ m%/([^/]*)/([^/]*)/g% )
+	   || ($pat =~ /s%([^%]*)%([^%]*)%;t/ )
+	   || ($pat =~ m%/([^/]*)/([^/]*)/;t% )
+	   ) {
+            # form : s%bla%blubb%g
+	    # or     s%bla%blubb%;t t   (newer autoconf)
+	    push @comp_match, eval "qr/\Q$1\E/";  # compile match pattern
+	    push @comp_subs, $2;
+	} elsif ( ($pat =~ /%([^%]*)%d/ )
+	   || ($pat =~ m%/([^/]*)/d% )
+	   ) {
+	    push @comp_match, eval "qr/\Q$1\E/";
+	    push @comp_subs, "";
+	} else {
+	    die "Uhh. Malformed pattern in $ac_cs_root.subs ($pat)"
+		unless ( $pat =~ /^\s*$/ );   # ignore white lines
+	}
+    }
+}
+undef @subs;
+
+# read the list of files to be patched, form:
+# ./Makefile arts/Makefile arts/examples/Makefile arts/flow/Makefile
+
+open(CF, "< $ac_cs_root.sacfiles") || die "can't open $ac_cs_root.sacfiles: $!";
+my @ac_files = <CF>;
+close(CF);
+chomp @ac_files;
+
+my $ac_file;
+foreach $ac_file (@ac_files) {
+    next if $ac_file =~ /\.\./;
+    next if $ac_file =~ /^\s*$/;
+    my $ac_file_in;
+    my ($ac_dir, $ac_dots, $ac_dir_suffix);
+
+    if ($ac_file =~ /.*:.*/ ) {
+	($ac_file_in = $ac_file) =~ s%[^:]*:%%;
+	$ac_file =~ s%:.*%%;
+    } else {
+	$ac_file_in = $ac_file.".in";
+    }
+
+# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+# Remove last slash and all that follows it.  Not all systems have dirname.
+    ($ac_dir = $ac_file) =~ s%/[^/][^/]*$%%;
+    if ( ($ac_dir ne $ac_file) && ($ac_dir ne ".")) {
+# The file is in a subdirectory.
+	if (! -d "$ac_dir") { mkdir "$ac_dir", 0777; }
+	($ac_dir_suffix = $ac_dir) =~ s%^./%%;
+	$ac_dir_suffix="/".$ac_dir_suffix;
+# A "../" for each directory in $ac_dir_suffix.
+	($ac_dots = $ac_dir_suffix) =~ s%/[^/]*%../%g;
+    } else {
+	$ac_dir_suffix="";
+	$ac_dots="";
+    }
+
+    if ($ac_given_srcdir eq ".") {
+	$srcdir=".";
+	if ($ac_dots) {
+	    ( $top_srcdir = $ac_dots) =~ s%/$%%;
+	} else { $top_srcdir="."; }
+    } elsif ($ac_given_srcdir =~ m%^/%) {
+	$srcdir=$ac_given_srcdir.$ac_dir_suffix;
+	$top_srcdir = $ac_given_srcdir;
+    } else {
+	$srcdir = $ac_dots.$ac_given_srcdir.$ac_dir_suffix;
+	$top_srcdir = $ac_dots.$ac_given_srcdir;
+    }
+
+    if ($ac_given_INSTALL) {
+	if ($ac_given_INSTALL =~ m%^/% ) {
+	    $INSTALL = $ac_given_INSTALL;
+	} else {
+	    $INSTALL = $ac_dots.$ac_given_INSTALL;
+	}
+    }
+
+    print "fast creating $ac_file\n";
+    unlink $ac_file;
+    my $ac_comsub="";
+    my $fname=$ac_file_in;
+    $fname =~ s%.*/%%;
+    my $configure_input="Generated automatically from $fname by config.pl.";
+    if ($ac_file =~ /.*[Mm]akefile.*/) {
+	$ac_comsub="# ".$configure_input."\n";  # for the first line in $ac_file
+    }
+
+    my $ac_file_inputs;
+    ($ac_file_inputs = $ac_file_in) =~ s%^%$ac_given_srcdir/%;
+    $ac_file_inputs =~ s%:% $ac_given_srcdir/%g;
+
+    patch_file($ac_file, $ac_file_inputs, $ac_comsub);
+}
+
+sub patch_file {
+    my ($outf, $infiles, $firstline) = @_;
+    my $filedata;
+    my @infiles=split(' ', $infiles);
+    my $i=0;
+
+    if ($firstline) {
+	$filedata = $firstline;
+    }
+    foreach my $name (@infiles) {
+	if (open(CF, "< $name")) {
+	    while (<CF>) {
+		$filedata .= $_;
+	    }
+	    close(CF);
+	} else {
+	    print STDERR "can't open $name: $!"."\n";
+	}
+    }
+
+    $filedata =~ s%\@configure_input\@%$configure_input%g;
+    $filedata =~ s%\@srcdir\@%$srcdir%g;
+    $filedata =~ s%\@top_srcdir\@%$top_srcdir%g;
+    $filedata =~ s%\@INSTALL\@%$INSTALL%g;
+
+    if ($bad_perl) {
+	while ($i <= $#comp_subs) {
+	    my $ref = $comp_subs[$i];
+	    &$ref(\$filedata);
+	    $i++;
+	}
+    } else {
+	while ($i <= $#comp_match) {
+	    $filedata =~ s/$comp_match[$i]/$comp_subs[$i]/g;
+	    $i++;
+	}
+    }
+    open(CF, "> $outf") || die "can't create $outf: $!";
+    print CF $filedata;
+    close(CF);
+}
+
+sub make_closure {
+    my ($pat, $sub) = @_;
+    $pat =~ s/\@/\\@/g;   # @bla@ -> \@bla\@
+    $pat =~ s/\$/\\\$/g;  # $bla -> \$bla
+    $sub =~ s/\@/\\@/g;
+    $sub =~ s/\$/\\\$/g;
+    my $ret = eval "return sub { my \$ref=shift; \$\$ref =~ s%$pat%$sub%g; }";
+    if ($@) {
+        print "can't create CODE: $@\n";
+    }
+    return $ret;
+}
diff --git a/krozat/admin/config.sub b/krozat/admin/config.sub
new file mode 100755
index 0000000..4ac0c8b
--- /dev/null
+++ b/krozat/admin/config.sub
@@ -0,0 +1,1360 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+#   Free Software Foundation, Inc.
+
+timestamp='2001-03-30'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit 0 ;;
+    --version | -v )
+       echo "$version" ; exit 0 ;;
+    --help | --h* | -h )
+       echo "$usage"; exit 0 ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit 0;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | storm-chaos* | os2-emx*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis)
+		os=
+		basic_machine=$1
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc \
+	        | arm | arme[lb] | arm[bl]e | armv[2345] | armv[345][lb] | strongarm | xscale \
+		| pyramid | mn10200 | mn10300 | tron | a29k \
+		| 580 | i960 | h8300 \
+		| x86 | ppcbe | mipsbe | mipsle | shbe | shle \
+		| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
+		| hppa64 \
+		| alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
+		| alphaev6[78] \
+		| we32k | ns16k | clipper | i370 | sh | sh[34] \
+		| powerpc | powerpcle \
+		| 1750a | dsp16xx | pdp10 | pdp11 \
+		| mips16 | mips64 | mipsel | mips64el \
+		| mips64orion | mips64orionel | mipstx39 | mipstx39el \
+		| mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
+		| mips64vr5000 | miprs64vr5000el | mcore | s390 | s390x \
+		| sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
+		| thumb | d10v | d30v | fr30 | avr | openrisc | tic80 \
+		| pj | pjl | h8500)
+		basic_machine=$basic_machine-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12)
+		# Motorola 68HC11/12.
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | w65)
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i[234567]86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	# FIXME: clean up the formatting here.
+	vax-* | tahoe-* | i[234567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
+	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | c[123]* \
+	      | arm-*  | armbe-* | armle-* | armv*-* | strongarm-* | xscale-* \
+	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+	      | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
+	      | xmp-* | ymp-* \
+	      | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* \
+	      | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
+	      | hppa2.0n-* | hppa64-* \
+	      | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
+	      | alphaev6[78]-* \
+	      | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+	      | clipper-* | orion-* \
+	      | sparclite-* | pdp10-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
+	      | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
+	      | mips64el-* | mips64orion-* | mips64orionel-* \
+	      | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
+	      | mipstx39-* | mipstx39el-* | mcore-* \
+	      | f30[01]-* | f700-* | s390-* | s390x-* | sv1-* | t3e-* \
+	      | [cjt]90-* \
+	      | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
+	      | thumb-* | v850-* | d30v-* | tic30-* | tic80-* | c30-* | fr30-* \
+	      | bs2000-* | tic54x-* | c54x-* | x86_64-* | pj-* | pjl-*)
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	cray2)
+		basic_machine=cray2-cray
+		os=-unicos
+		;;
+	[cjt]90)
+		basic_machine=${basic_machine}-cray
+		os=-unicos
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+	i[34567]86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i[34567]86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i[34567]86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i[34567]86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	mingw32)
+		basic_machine=i386-pc
+		os=-mingw32
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mipsel*-linux*)
+		basic_machine=mipsel-unknown
+		os=-linux-gnu
+		;;
+	mips*-linux*)
+		basic_machine=mips-unknown
+		os=-linux-gnu
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	mmix*)
+		basic_machine=mmix-knuth
+		os=-mmixware
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+        pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pentium | p5 | k5 | k6 | nexgen)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2)
+		basic_machine=i686-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc)	basic_machine=powerpc-unknown
+	        ;;
+	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+	        ;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sparclite-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=t3e-cray
+		os=-unicos
+		;;
+	tic54x | c54x*)
+		basic_machine=tic54x-unknown
+		os=-coff
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+               basic_machine=f301-fujitsu
+               ;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xmp)
+		basic_machine=xmp-cray
+		os=-unicos
+		;;
+        xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	mips)
+		if [ x$os = x-linux-gnu ]; then
+			basic_machine=mips-unknown
+		else
+			basic_machine=mips-mips
+		fi
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh3 | sh4)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv9)
+		basic_machine=sparc-sun
+		;;
+        cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	c4x*)
+		basic_machine=c4x-none
+		os=-coff
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* | -os2*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i[34567]86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto*)
+		os=-nto-qnx
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-ns2 )
+	        os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+        -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+	        os=-mint
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+	pdp10-*)
+		os=-tops20
+		;;
+        pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+        *-gould)
+		os=-sysv
+		;;
+        *-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+        *-sgi)
+		os=-irix
+		;;
+        *-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-vxsim* | -vxworks*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/krozat/admin/configure.in.min b/krozat/admin/configure.in.min
new file mode 100644
index 0000000..4503fec
--- /dev/null
+++ b/krozat/admin/configure.in.min
@@ -0,0 +1,55 @@
+dnl    This file is part of the KDE libraries/packages
+dnl    Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
+ 
+dnl    This file is free software; you can redistribute it and/or
+dnl    modify it under the terms of the GNU Library General Public
+dnl    License as published by the Free Software Foundation; either
+dnl    version 2 of the License, or (at your option) any later version.
+ 
+dnl    This library is distributed in the hope that it will be useful,
+dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+dnl    Library General Public License for more details.
+ 
+dnl    You should have received a copy of the GNU Library General Public Licensednl    along with this library; see the file COPYING.LIB.  If not, write to
+dnl    the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+dnl    Boston, MA 02111-1307, USA.
+
+# Original Author was Kalle@kde.org
+# I lifted it in some mater. (Stephan Kulow)
+# I used much code from Janos Farkas
+
+dnl Process this file with autoconf to produce a configure script.
+
+AC_INIT(acinclude.m4) dnl a source file from your sub dir
+
+dnl This is so we can use kde-common
+AC_CONFIG_AUX_DIR(admin)
+
+dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
+unset CDPATH
+
+dnl Checking host/target/build systems, for make, install etc.
+AC_CANONICAL_SYSTEM 
+dnl Perform program name transformation
+AC_ARG_PROGRAM
+
+dnl Automake doc recommends to do this only here. (Janos)
+AM_INIT_AUTOMAKE(@MODULENAME@, @VERSION@) dnl searches for some needed programs
+
+KDE_SET_PREFIX
+
+dnl generate the config header
+AM_CONFIG_HEADER(config.h) dnl at the distribution this done
+
+dnl Checks for programs.
+AC_CHECK_COMPILERS
+AC_ENABLE_SHARED(yes)
+AC_ENABLE_STATIC(no)
+KDE_PROG_LIBTOOL
+
+dnl for NLS support. Call them in this order!
+dnl WITH_NLS is for the po files
+AM_KDE_WITH_NLS
+
+AC_PATH_KDE
diff --git a/krozat/admin/debianrules b/krozat/admin/debianrules
new file mode 100755
index 0000000..2154103
--- /dev/null
+++ b/krozat/admin/debianrules
@@ -0,0 +1,84 @@
+#!/usr/bin/perl -w
+
+use Shell qw(mv cp mkdir rm) ;
+use File::Find;
+use Cwd;
+
+$origPwd = `pwd`;
+chomp $origPwd;
+
+
+if (@ARGV && $ARGV[0] eq 'cleanup') {
+
+if (-d "debian/tmp/usr/share/config") {
+	if (! -d "debian/tmp/$kde_confdir") {
+	  system("mv debian/tmp/usr/share/config debian/tmp/$kde_confdir");
+	}
+}
+system("rm -f `find debian/ -name \".anchors\"`");
+system("chmod 755 debian/*preinst debian/*postinst");
+
+exit;
+}
+
+$QTDIR="/usr/share/qt";
+$kde_prefix="/usr";
+$kde_htmldir="$kde_prefix/share/doc/kde/HTML";
+$kde_icondir="$kde_prefix/share/icons";
+$kde_sounddir="$kde_prefix/share/sounds";
+$kde_datadir="$kde_prefix/share/apps";
+$kde_locale="$kde_prefix/share/locale";
+$kde_confdir="/etc/kde2";
+$kde_cgidir="$kde_prefix/lib/cgi-bin";
+$kde_appsdir="$kde_prefix/share/applnk";
+$kde_mimedir="$kde_prefix/share/mimelnk";
+$kde_wallpaperdir="$kde_prefix/share/wallpapers";
+$kde_bindir="$kde_prefix/bin";
+$kde_servicesdir="$kde_prefix/share/services";
+$kde_servicetypesdir="$kde_prefix/share/servicetypes";
+$kde_includedir="$kde_prefix/include/kde";
+$kde_libdir="$kde_prefix/lib";
+$kde_moduledir="$kde_prefix/lib/kde2";
+$mandir="$kde_prefix/share/man"; 
+$infodir="$kde_prefix/share/info";
+$IDL="$kde_bindir/cuteidl";
+$DCOPIDL="$kde_bindir/dcopidl";
+$DCOPIDL2CPP="$kde_bindir/dcopidl2cpp";
+$KDB2HTML="$kde_bindir/kdb2html";
+$MCOPIDL="$kde_bindir/mcopidl";
+$ARTSCCONFIG="$kde_bindir/artsc-config";
+
+if (@ARGV && $ARGV[0] eq 'echodirs') {
+  print STDOUT "export kde_htmldir=$kde_htmldir\n";
+  print STDOUT "export kde_appsdir=$kde_appsdir\n";
+  print STDOUT "export kde_icondir=$kde_icondir\n";
+  print STDOUT "export kde_sounddir=$kde_sounddir\n";
+  print STDOUT "export kde_datadir=$kde_datadir\n";
+  print STDOUT "export kde_cgidir=$kde_cgidir\n";
+  print STDOUT "export kde_locale=$kde_locale\n";
+  print STDOUT "export kde_confdir=$kde_confdir\n";
+  print STDOUT "export kde_mimedir=$kde_mimedir\n";
+  print STDOUT "export kde_wallpaperdir=$kde_wallpaperdir\n";
+  print STDOUT "export kde_bindir=$kde_bindir\n";
+  print STDOUT "export kde_servicesdir=$kde_servicesdir\n";
+  print STDOUT "export kde_servicetypesdir=$kde_servicetypesdir\n";
+  print STDOUT "export kde_includedir=$kde_includedir\n";
+  print STDOUT "export kde_libdir=$kde_libdir\n";
+  print STDOUT "export kde_moduledir=$kde_moduledir\n";
+  print STDOUT "export mandir=$mandir\n";
+  print STDOUT "export infodir=$infodir\n";
+  print STDOUT "export QTDIR=$QTDIR\n";
+  print STDOUT "export kde_prefix=$kde_prefix\n";
+  print STDOUT "export INSTALL_DATA=install -p -c -m 644\n";
+  print STDOUT "export IDL=$IDL\n";
+  print STDOUT "export DCOPIDL=$DCOPIDL\n";
+  print STDOUT "export DCOPIDL2CPP=$DCOPIDL2CPP\n";
+  print STDOUT "export KDB2HTML=$KDB2HTML\n";
+  print STDOUT "export MCOPIDL=$MCOPIDL\n";
+  print STDOUT "export ARTSCCONFIG=$ARTSCCONFIG\n";
+  print STDOUT "configkde=--disable-debug --disable-rpath --prefix=\$(kde_prefix) --libexecdir=\$(kde_bindir) --with-qt-includes=/usr/include/qt --mandir=\$(mandir) --infodir=\$(infodir)\n";
+  print STDOUT "configkdevelop=--enable-docbase --enable-kdoc2 --disable-rpath --libdir=\$(kde_libdir) --includedir=\$(kde_includedir) --with-qt-includes=/usr/include/qt --mandir=\$(mandir) --with-kdelibsdoc-dir=/usr/share/doc/kdelibs3-doc/html\n";
+  print STDOUT "configkdepim=--with-extra-includes=/usr/include/libpisock --enable-shared --disable-rpath --prefix=\$(kde_prefix) --libexecdir=\$(kde_bindir) --with-qt-includes=/usr/include/qt --mandir=\$(mandir) --infodir=\$(infodir)\n";
+  exit
+}
+
diff --git a/krozat/admin/depcomp b/krozat/admin/depcomp
new file mode 100755
index 0000000..30f36ee
--- /dev/null
+++ b/krozat/admin/depcomp
@@ -0,0 +1,367 @@
+#! /bin/sh
+
+# depcomp - compile a program generating dependencies as side-effects
+# Copyright 1999, 2000 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+# `libtool' can also be set to `yes' or `no'.
+
+depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!
+  if "$@" -MT "$object" -MF "$tmpdepfile" -MD -MP; then :
+  else
+    stat=$?
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  if "$@" -Wp,"$gccflag$tmpdepfile"; then :
+  else
+    stat=$?
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent). Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).
+    tr ' ' '
+' < "$tmpdepfile" | sed 's/^[^\.]*\.o://' | tr '
+' ' ' >> $depfile
+
+    tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+      sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.
+  tmpdepfile=`echo "$object" | sed 's/\(.*\)\..*$/\1.u/'`
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent). Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).
+    tr ' ' '
+' < "$tmpdepfile" | sed 's/^[^\.]*\.o://' | tr '
+' ' ' >> $depfile
+
+    tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+      sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  test -z "$dashmflag" && dashmflag=-M
+  ( IFS=" "
+    case " $* " in
+    *" --mode=compile "*) # this is libtool, let us make it quiet
+      for arg
+      do # cycle over the arguments
+        case "$arg" in
+	"--mode=compile")
+	  # insert --quiet before "--mode=compile"
+	  set fnord "$@" --quiet
+	  shift # fnord
+	  ;;
+	esac
+	set fnord "$@" "$arg"
+	shift # fnord
+	shift # "$arg"
+      done
+      ;;
+    esac
+    "$@" $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  # X makedepend
+  (
+    shift
+    cleared=no
+    for arg in "$@"; do
+      case $cleared in no)
+        set ""; shift
+	cleared=yes
+      esac
+      case "$arg" in
+        -D*|-I*)
+	  set fnord "$@" "$arg"; shift;;
+	-*)
+	  ;;
+	*)
+	  set fnord "$@" "$arg"; shift;;
+      esac
+    done
+    obj_suffix="`echo $object | sed 's/^.*\././'`"
+    touch "$tmpdepfile"
+    ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tail +3 "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  ( IFS=" "
+    case " $* " in
+    *" --mode=compile "*)
+      for arg
+      do # cycle over the arguments
+        case $arg in
+	"--mode=compile")
+	  # insert --quiet before "--mode=compile"
+	  set fnord "$@" --quiet
+	  shift # fnord
+	  ;;
+	esac
+	set fnord "$@" "$arg"
+	shift # fnord
+	shift # "$arg"
+      done
+      ;;
+    esac
+    "$@" -E |
+    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  ( IFS=" "
+    case " $* " in
+    *" --mode=compile "*)
+      for arg
+      do # cycle over the arguments
+        case $arg in
+	"--mode=compile")
+	  # insert --quiet before "--mode=compile"
+	  set fnord "$@" --quiet
+	  shift # fnord
+	  ;;
+	esac
+	set fnord "$@" "$arg"
+	shift # fnord
+	shift # "$arg"
+      done
+      ;;
+    esac
+    "$@" -E |
+    sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
diff --git a/krozat/admin/install-sh b/krozat/admin/install-sh
new file mode 100755
index 0000000..e9de238
--- /dev/null
+++ b/krozat/admin/install-sh
@@ -0,0 +1,251 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0
diff --git a/krozat/admin/libtool.m4.in b/krozat/admin/libtool.m4.in
new file mode 100644
index 0000000..4e67b29
--- /dev/null
+++ b/krozat/admin/libtool.m4.in
@@ -0,0 +1,868 @@
+## libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
+## Copyright 1996, 1997, 1998, 1999, 2000, 2001
+## Free Software Foundation, Inc.
+## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful, but
+## WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+##
+## As a special exception to the GNU General Public License, if you
+## distribute this file as part of a program that contains a
+## configuration script generated by Autoconf, you may include it under
+## the same distribution terms that you use for the rest of that program.
+
+# serial 46 AC_PROG_LIBTOOL
+AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+  AC_PROVIDE_IFELSE([AC_PROG_CXX],
+    [AC_LIBTOOL_CXX],
+    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+])])
+
+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+    [AC_LIBTOOL_GCJ],
+    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+        [AC_LIBTOOL_GCJ],
+	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+	  [AC_LIBTOOL_GCJ],
+	[ifdef([AC_PROG_GCJ],
+	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
+])])
+	 ifdef([A][M_PROG_GCJ],
+	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
+])])
+	 ifdef([LT_AC_PROG_GCJ],
+	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
+])])])])])])
+
+AC_DEFUN([_AC_PROG_LIBTOOL],
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool.  ac_aux_dir is where install-sh is found.
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+AC_DEFUN([AC_LIBTOOL_SETUP],
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+AC_REQUIRE([AC_OBJEXT])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
+dnl
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    AC_PATH_MAGIC
+  fi
+  ;;
+esac
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+AC_ARG_WITH(pic,
+  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
+     pic_mode="$withval", pic_mode=default)
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_SAVE
+     AC_LANG_C
+     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_RESTORE])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+
+  # recent cygwin and mingw systems supply a stub DllMain which the user
+  # can override, but on older systems we have to supply one
+  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
+    [AC_TRY_LINK([],
+      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
+      DllMain (0, 0, 0);],
+      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
+
+  case $host/$CC in
+  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
+    # old mingw systems require "-dll" to link a DLL, while more recent ones
+    # require "-mdll"
+    SAVE_CFLAGS="$CFLAGS"
+    CFLAGS="$CFLAGS -mdll"
+    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
+      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
+    CFLAGS="$SAVE_CFLAGS" ;;
+  *-*-cygwin* | *-*-pw32*)
+    # cygwin systems need to pass --dll to the linker, and not link
+    # crt.o which will require a WinMain@16 definition.
+    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
+  esac
+  ;;
+  ])
+esac
+])
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+  enable_shared=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_shared=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+  enable_static=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_static=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+  enable_fast_install=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_fast_install=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_LIBTOOL_PICMODE - implement the --with-pic flag
+# Usage: AC_LIBTOOL_PICMODE[(MODE)]
+#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
+#   `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)])
+
+
+# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+  /*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+  ?:/*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+  ;;
+  *)
+  ac_save_MAGIC_CMD="$MAGIC_CMD"
+  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    egrep "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  MAGIC_CMD="$ac_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+])
+
+
+# AC_PATH_MAGIC - find a file program which can recognise a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
+AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])
+
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by GCC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]* | [A-Za-z]:[\\/]*)]
+      re_direlt=['/[^/][^/]*/\.\./']
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	test "$with_gnu_ld" != no && break
+      else
+	test "$with_gnu_ld" != yes && break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])
+
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  lt_cv_prog_gnu_ld=yes
+else
+  lt_cv_prog_gnu_ld=no
+fi])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])
+
+# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
+[lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+])
+
+# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognise dependant libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi4*)
+  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin* | mingw* |pw32*)
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  case "$host_os" in
+  rhapsody* | darwin1.[012])
+    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
+    ;;
+  *) # Darwin 1.3 on
+    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+    ;;
+  esac
+  ;;
+
+freebsd* )
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20*|hpux11*)
+  lt_cv_deplibs_check_method=['file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libc.sl
+  ;;
+
+irix5* | irix6*)
+  case $host_os in
+  irix5*)
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+    ;;
+  *)
+    case $LD in
+    *-32|*"-32 ") libmagic=32-bit;;
+    *-n32|*"-n32 ") libmagic=N32;;
+    *-64|*"-64 ") libmagic=64-bit;;
+    *) libmagic=never-match;;
+    esac
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
+    ;;
+  esac
+  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  case $host_cpu in
+  alpha* | i*86 | powerpc* | sparc* | ia64* | s390* | m68k* | arm* | mips* | hppa* | sh* )
+    lt_cv_deplibs_check_method=pass_all ;;
+  *)
+    # glibc up to 2.1.1 does not perform some relocations on ARM
+    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
+  esac
+  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    [lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library']
+  else
+    [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object']
+  fi
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+  ;;
+
+openbsd* )
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case "$host_cpu" in
+    i*86 )
+      changequote(,)dnl
+      lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library'
+      changequote([, ])dnl
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+newsos6)
+  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+osf3* | osf4* | osf5*)
+  # this will be overridden with pass_all, but let us keep it just in case
+  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sco3.2v5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  lt_cv_file_magic_test_file=/lib/libc.so
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  case $host_vendor in
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  motorola)
+    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  esac
+  ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+])
+
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+    test -z "$ac_dir" && ac_dir=.
+    tmp_nm=$ac_dir/${ac_tool_prefix}nm
+    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+      # Check to see if the nm accepts a BSD-compat flag.
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+      #   nm: unknown option "B" ignored
+      # Tru64's nm complains that /dev/null is an invalid object file
+      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+	lt_cv_path_NM="$tmp_nm -B"
+	break
+      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	lt_cv_path_NM="$tmp_nm -p"
+	break
+      else
+	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	continue # so that we can try to find one that supports BSD flags
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+AC_MSG_RESULT([$NM])
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32*)
+  # These system don't have libm
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, main, LIBM="-lm")
+  ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments.  Note that LIBLTDL and INCLTDL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
+# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
+# with '${top_builddir}/' and INCLTDL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  case $enable_ltdl_convenience in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+  esac
+  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
+# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!).  If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, main,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
+  ])
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    INCLTDL=
+  fi
+])
+
+# If this macro is not defined by Autoconf, define it here.
+ifdef([AC_PROVIDE_IFELSE],
+      [],
+      [define([AC_PROVIDE_IFELSE],
+              [ifdef([AC_PROVIDE_$1],
+                     [$2], [$3])])])
+
+# AC_LIBTOOL_CXX - enable support for C++ libraries
+AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
+
+AC_DEFUN([_AC_LIBTOOL_CXX],
+[AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([AC_PROG_CXXCPP])
+LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
+lt_save_CC="$CC"
+lt_save_CFLAGS="$CFLAGS"
+dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
+dnl is set to the C++ compiler.
+AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" \
+file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
+--build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
+|| AC_MSG_ERROR([libtool tag configuration failed])
+CC="$lt_save_CC"
+CFLAGS="$lt_save_CFLAGS"
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+# AC_LIBTOOL_GCJ - enable support for GCJ libraries
+AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
+
+AC_DEFUN([_AC_LIBTOOL_GCJ],
+[AC_REQUIRE([AC_PROG_LIBTOOL])
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
+    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
+      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
+         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
+           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
+LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
+lt_save_CC="$CC"
+lt_save_CFLAGS="$CFLAGS"
+dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
+dnl is set to the C++ compiler.
+AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" \
+file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
+--build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
+|| AC_MSG_ERROR([libtool tag configuration failed])
+CC="$lt_save_CC"
+CFLAGS="$lt_save_CFLAGS"
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+dnl old names
+AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
+AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
+AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
+AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
+
+AC_DEFUN([LT_AC_PROG_GCJ],
+[AC_CHECK_TOOL(GCJ, gcj, no)
+  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+  AC_SUBST(GCJFLAGS)
+])
diff --git a/krozat/admin/ltcf-c.sh b/krozat/admin/ltcf-c.sh
new file mode 100644
index 0000000..288580c
--- /dev/null
+++ b/krozat/admin/ltcf-c.sh
@@ -0,0 +1,796 @@
+#### This script is meant to be sourced by ltconfig.
+
+# ltcf-c.sh - Create a C compiler specific configuration
+#
+# Copyright (C) 1996-2000, 2001 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='main(){return(0);}'
+
+## Linker Characteristics
+case $host_os in
+cygwin* | mingw*)
+  # FIXME: the MSVC++ port hasn't been tested in a loooong time
+  # When not using gcc, we currently assume that we are using
+  # Microsoft Visual C++.
+  if test "$with_gcc" != yes; then
+    with_gnu_ld=no
+  fi
+  ;;
+
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # If archive_cmds runs LD, not CC, wlarc should be empty
+  wlarc='${wl}'
+
+  # See if GNU ld supports shared libraries.
+  case $host_os in
+  aix3* | aix4* | aix5*)
+    # On AIX, the GNU linker is very broken
+    ld_shlibs=no
+    cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+
+    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+    # that the semantics of dynamic libraries on AmigaOS, at least up
+    # to version 4, is to share data among multiple programs linked
+    # with the same dynamic library.  Since this doesn't match the
+    # behavior of shared libraries on other platforms, we can use
+    # them.
+    ld_shlibs=no
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  cygwin* | mingw*)
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec='-L$libdir'
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+
+    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
+      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/impgen.c~
+      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
+      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
+      else $CC -o impgen impgen.c ; fi)~
+      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
+
+    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
+
+    # cygwin and mingw dlls have different entry points and sets of symbols
+    # to exclude.
+    # FIXME: what about values for MSVC?
+    dll_entry=__cygwin_dll_entry@12
+    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
+    case $host_os in
+    mingw*)
+      # mingw values
+      dll_entry=_DllMainCRTStartup@12
+      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
+      ;;
+    esac
+
+    # mingw and cygwin differ, and it's simplest to just exclude the union
+    # of the two symbol sets.
+    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
+
+    # recent cygwin and mingw systems supply a stub DllMain which the user
+    # can override, but on older systems we have to supply one (in ltdll.c)
+    if test "x$lt_cv_need_dllmain" = "xyes"; then
+      ltdll_obj='$output_objdir/$soname-ltdll.'"$objext "
+      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/$soname-ltdll.c~
+	test -f $output_objdir/$soname-ltdll.$objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
+    else
+      ltdll_obj=
+      ltdll_cmds=
+    fi
+
+    # Extract the symbol export list from an `--export-all' def file,
+    # then regenerate the def file from the symbol export list, so that
+    # the compiled dll only exports the symbol export list.
+    # Be careful not to strip the DATA tag left be newer dlltools.
+    export_symbols_cmds="$ltdll_cmds"'
+      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
+      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
+
+    # If the export-symbols file already is a .def file (1st line
+    # is EXPORTS), use it as is.
+    # If DATA tags from a recent dlltool are present, honour them!
+    archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
+        cp $export_symbols $output_objdir/$soname-def;
+      else
+        echo EXPORTS > $output_objdir/$soname-def;
+        _lt_hint=1;
+        cat $export_symbols | while read symbol; do
+         set dummy \$symbol;
+         case \[$]# in
+           2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+           *) echo "     \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
+         esac;
+         _lt_hint=`expr 1 + \$_lt_hint`;
+        done;
+      fi~
+      '"$ltdll_cmds"'
+      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
+      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
+      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
+    ;;
+
+  darwin* | rhapsody*)
+    allow_undefined_flag='-undefined suppress'
+    archive_cmds='$CC `test .$module = .yes && echo -bundle || echo -dynamiclib` $allow_undefined_flag -o $lib $libobjs $deplibs $linkopts -install_name $rpath/$soname `test -n "$verstring" -a x$verstring != x0.0 && echo $verstring`'
+    # We need to add '_' to the symbols in $export_symbols first
+    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    whole_archive_flag_spec='-all_load $convenience'
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+      wlarc=
+    else
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    fi
+    ;;
+
+  solaris* | sysv5*)
+    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+      ld_shlibs=no
+      cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+    wlarc=
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+  esac
+
+  case "$host_os" in
+  freebsd*)
+    skip_need_lc_check=yes
+    ;;
+  esac
+
+  if test "$ld_shlibs" = yes; then
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    case $host_os in
+    cygwin* | mingw*)
+      # dlltool doesn't understand --whole-archive et. al.
+      whole_archive_flag_spec=
+      ;;
+    *)
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+	whole_archive_flag_spec=
+      fi
+      ;;
+    esac
+  fi
+else
+  # PORTME fill in a description of your system's linker (not GNU ld)
+  case $host_os in
+  aix3*)
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+    # Note: this linker hardcodes the directories in LIBPATH if there
+    # are no directories specified by -L.
+    hardcode_minus_L=yes
+    if test "$with_gcc" = yes && test -z "$link_static_flag"; then
+      # Neither direct hardcoding nor static linking is supported with a
+      # broken collect2.
+      hardcode_direct=unsupported
+    fi
+    ;;
+
+  aix4* | aix5*)
+    hardcode_direct=yes
+    hardcode_libdir_separator=':'
+    link_all_deplibs=yes
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+    if test "$with_gcc" = yes; then
+      case $host_os in aix4.[012]|aix4.[012].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+        collect2name=`${CC} -print-prog-name=collect2`
+        if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+        then
+	  # We have reworked collect2
+	  hardcode_direct=yes
+        else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+        fi
+      esac
+      shared_flag='-shared'
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+        shared_flag='${wl}-G'
+      else
+        shared_flag='${wl}-bM:SRE'
+      fi
+    fi
+
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      # KDE requires run time linking.  Make it the default.
+      aix_use_runtimelinking=yes
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+    # Let the compiler handle the export list.
+    always_export_symbols=no
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other run time loading flags (-brtl), -berok will
+      #           link without error, but may produce a broken library.
+      allow_undefined_flag=' ${wl}-berok'
+      # The following three lines along with hardcode_into_libs=yes put the correct path into libraries.
+      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir${libdir:+:}/usr/lib:/lib'
+      archive_cmds='$CC '"$shared_flag"' $libobjs $deplibs $linker_flags ${wl}-G '"$hardcode_libdir_flag_spec"' -o $lib'
+      archive_expsym_cmds='$CC '"$shared_flag"' $libobjs $deplibs $linker_flags ${wl}-G '"$hardcode_libdir_flag_spec"' ${wl}'"$exp_sym_flag"':$export_symbols -o $lib'
+    else
+      if test "$host_cpu" = ia64; then
+        hardcode_libdir_flag_spec='${wl}-R $libdir${libdir:+:}/usr/lib:/lib'
+        allow_undefined_flag="-z nodefs"
+        archive_cmds='$CC '"$shared_flag"' $libobjs $deplibs $linker_flags '"$hardcode_libdir_flag_spec"' -o $lib'
+        archive_expsym_cmds='$CC '"$shared_flag"' $libobjs $deplibs $linker_flags '"$hardcode_libdir_flag_spec"' ${wl}'"$exp_sym_flag"':$export_symbols -o $lib'
+      else
+        allow_undefined_flag=' ${wl}-berok'
+        # -bexpall does not export symbols beginning with underscore (_)
+        always_export_symbols=yes
+        # Exported symbols can be pulled into shared objects from archives
+        whole_archive_flag_spec=' '
+        build_libtool_need_lc=yes
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+        # This is similar to how AIX traditionally builds it's shared libraries.
+        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    # see comment about different semantics on the GNU ld section
+    ld_shlibs=no
+    ;;
+
+  cygwin* | mingw*)
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec=' '
+    allow_undefined_flag=unsupported
+    # Tell ltmain to make .lib files, not .a files.
+    libext=lib
+    # FIXME: Setting linknames here is a bad hack.
+    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+    # The linker will automatically build a .lib file if we build a DLL.
+    old_archive_from_new_cmds='true'
+    # FIXME: Should let the user specify the lib program.
+    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+    fix_srcfile_path='`cygpath -w "$srcfile"`'
+    ;;
+
+  freebsd1*)
+    ld_shlibs=no
+    ;;
+
+  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+  # support.  Future versions do this automatically, but an explicit c++rt0.o
+  # does not break anything, and helps significantly (at the cost of a little
+  # extra space).
+  freebsd2.2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+  freebsd2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+  freebsd*)
+    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    skip_need_lc_check=yes
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    case $host_os in
+    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
+    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
+    esac
+    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_direct=yes
+    hardcode_minus_L=yes # Not in the search PATH, but as the default
+			 # location of the library.
+    export_dynamic_flag_spec='${wl}-E'
+    ;;
+
+  irix5* | irix6*)
+    if test "$with_gcc" = yes; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    link_all_deplibs=yes
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+    else
+      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+    fi
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  newsos6)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_direct=yes
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_shlibpath_var=no
+    ;;
+
+  openbsd*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  os2*)
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    allow_undefined_flag=unsupported
+    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+    ;;
+
+  osf3*)
+    if test "$with_gcc" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  osf4* | osf5*)	# as osf3* with the addition of -msym flag
+    if test "$with_gcc" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+    fi
+    hardcode_libdir_flag_spec='-rpath $libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  sco3.2v5*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_shlibpath_var=no
+    runpath_var=LD_RUN_PATH
+    hardcode_runpath_var=yes
+    ;;
+
+  solaris*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_shlibpath_var=no
+    case $host_os in
+    solaris2.[0-5] | solaris2.[0-5].*) ;;
+    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+    esac
+    link_all_deplibs=yes
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+    ;;
+
+  sysv4.3*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_shlibpath_var=no
+    export_dynamic_flag_spec='-Bexport'
+    ;;
+
+  sysv5*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+    hardcode_libdir_flag_spec=
+    hardcode_shlibpath_var=no
+    runpath_var='LD_RUN_PATH'
+    ;;
+
+  uts4*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  dgux*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4*MP*)
+    if test -d /usr/nec; then
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      runpath_var=LD_RUN_PATH
+      hardcode_runpath_var=yes
+      ld_shlibs=yes
+    fi
+    ;;
+
+  sysv4.2uw2*)
+    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_direct=yes
+    hardcode_minus_L=no
+    hardcode_shlibpath_var=no
+    hardcode_runpath_var=yes
+    runpath_var=LD_RUN_PATH
+    ;;
+
+  unixware7*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    ld_shlibs=no
+    ;;
+  esac
+fi
+
+## Compiler Characteristics: PIC flags, static flags, etc
+if test "X${ac_cv_prog_cc_pic+set}" = Xset; then
+  :
+else
+  ac_cv_prog_cc_pic=
+  ac_cv_prog_cc_shlib=
+  ac_cv_prog_cc_wl=
+  ac_cv_prog_cc_static=
+  ac_cv_prog_cc_no_builtin=
+  ac_cv_prog_cc_can_build_shared=$can_build_shared
+
+  if test "$with_gcc" = yes; then
+    ac_cv_prog_cc_wl='-Wl,'
+    ac_cv_prog_cc_static='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+        # AIX 5 now supports IA64 processor
+        lt_cv_prog_cc_static='-Bstatic'
+      else
+        lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      ac_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    cygwin* | mingw* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      ac_cv_prog_cc_pic='-DDLL_EXPORT'
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_cv_prog_cc_pic='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      ac_cv_prog_cc_pic=
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	 ac_cv_prog_cc_pic=-Kconform_pic
+      fi
+      ;;
+    *)
+      ac_cv_prog_cc_pic='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for PIC flags for the system compiler.
+    case $host_os in
+    aix*)
+     # All AIX code is PIC.
+      ac_cv_prog_cc_static="$ac_cv_prog_cc_static ${ac_cv_prog_cc_wl}-lC"
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      # Is there a better ac_cv_prog_cc_static that works with the bundled CC?
+      ac_cv_prog_cc_wl='-Wl,'
+      ac_cv_prog_cc_static="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+      ac_cv_prog_cc_pic='+Z'
+      ;;
+
+    irix5* | irix6*)
+      ac_cv_prog_cc_wl='-Wl,'
+      ac_cv_prog_cc_static='-non_shared'
+      # PIC (with -KPIC) is the default.
+      ;;
+
+    cygwin* | mingw* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      ac_cv_prog_cc_pic='-DDLL_EXPORT'
+      ;;
+
+    newsos6)
+      ac_cv_prog_cc_pic='-KPIC'
+      ac_cv_prog_cc_static='-Bstatic'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      # All OSF/1 code is PIC.
+      ac_cv_prog_cc_wl='-Wl,'
+      ac_cv_prog_cc_static='-non_shared'
+      ;;
+
+    sco3.2v5*)
+      ac_cv_prog_cc_pic='-Kpic'
+      ac_cv_prog_cc_static='-dn'
+      ac_cv_prog_cc_shlib='-belf'
+      ;;
+
+    solaris*)
+      ac_cv_prog_cc_pic='-KPIC'
+      ac_cv_prog_cc_static='-Bstatic'
+      ac_cv_prog_cc_wl='-Wl,'
+      ;;
+
+    sunos4*)
+      ac_cv_prog_cc_pic='-PIC'
+      ac_cv_prog_cc_static='-Bstatic'
+      ac_cv_prog_cc_wl='-Qoption ld '
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+      ac_cv_prog_cc_pic='-KPIC'
+      ac_cv_prog_cc_static='-Bstatic'
+      ac_cv_prog_cc_wl='-Wl,'
+      ;;
+
+    uts4*)
+      ac_cv_prog_cc_pic='-pic'
+      ac_cv_prog_cc_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	ac_cv_prog_cc_pic='-Kconform_pic'
+	ac_cv_prog_cc_static='-Bstatic'
+      fi
+      ;;
+
+    *)
+      ac_cv_prog_cc_can_build_shared=no
+      ;;
+    esac
+  fi
+  case "$host_os" in
+      # Platforms which do not suport PIC and -DPIC is meaningless
+      # on them:
+      *djgpp*)
+        ac_cv_prog_cc_pic=
+        ;;
+      *)
+        ac_cv_prog_cc_pic="$ac_cv_prog_cc_pic -DPIC"
+        ;;
+  esac
+fi
+
+need_lc=yes
+if test "$enable_shared" = yes && test "$with_gcc" = yes; then
+  case $archive_cmds in
+  *'~'*)
+    # FIXME: we may have to deal with multi-command sequences.
+    ;;
+  '$CC '*)
+    # Test whether the compiler implicitly links with -lc since on some
+    # systems, -lgcc has to come before -lc. If gcc already passes -lc
+    # to ld, don't add -lc before -lgcc.
+    echo $ac_n "checking whether -lc should be explicitly linked in... $ac_c" 1>&6
+    if eval "test \"`echo '$''{'ac_cv_archive_cmds_needs_lc'+set}'`\" = set"; then
+      echo $ac_n "(cached) $ac_c" 1>&6
+      need_lc=$ac_cv_archive_cmds_needs_lc
+    elif test "x$skip_need_lc_check" = "xyes" ; then
+      echo $ac_n "(skipping, using no) $ac_c" 1>&6
+      need_lc=no
+    else
+      $rm conftest*
+      echo "static int dummy;" > conftest.$ac_ext
+      if { (eval echo ltcf-c.sh:need_lc: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
+	# Append any warnings to the config.log.
+	cat conftest.err 1>&5
+	soname=conftest
+	lib=conftest
+	libobjs=conftest.$ac_objext
+	deplibs=
+	wl=$ac_cv_prog_cc_wl
+	compiler_flags=-v
+	linker_flags=-v
+	verstring=
+	output_objdir=.
+	libname=conftest
+	save_allow_undefined_flag=$allow_undefined_flag
+	allow_undefined_flag=
+	if { (eval echo ltcf-c.sh:need_lc: \"$archive_cmds\") 1>&5; (eval $archive_cmds) 2>&1 | grep " -lc " 1>&5 ; }; then
+	  need_lc=no
+	fi
+	allow_undefined_flag=$save_allow_undefined_flag
+      else
+	cat conftest.err 1>&5
+      fi
+    fi
+    $rm conftest*
+    echo "$ac_t$need_lc" 1>&6
+    ;;
+  esac
+fi
+ac_cv_archive_cmds_needs_lc=$need_lc
diff --git a/krozat/admin/ltcf-cxx.sh b/krozat/admin/ltcf-cxx.sh
new file mode 100644
index 0000000..70ccba9
--- /dev/null
+++ b/krozat/admin/ltcf-cxx.sh
@@ -0,0 +1,1040 @@
+#### This script is meant to be sourced by ltconfig.
+
+# ltcf-cxx.sh - Create a C++ compiler specific configuration
+#
+# Copyright (C) 1996-1999, 2000, 2001 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# Original C++ support by:Gary V. Vaughan <gvv@techie.com>
+#    Alexandre Oliva <oliva@lsd.ic.unicamp.br>
+#    Ossama Othman <ossama@debian.org>
+#    Thomas Thanner <tanner@gmx.de>
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Source file extension for C++ test sources.
+ac_ext=cc
+
+# Object file extension for compiled C++ test sources.
+objext=o
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[]) { return (0); }'
+
+# C++ compiler
+CXX=${CXX-c++}
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+CC=${CC-"$CXX"}
+CFLAGS=${CFLAGS-"$CXXFLAGS"}
+
+# Allow CC (or CXX) to be a program name with arguments.
+set dummy $CC
+compiler=$2
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+
+# we are optimistic. (Too optimistic if you ask me, down there we switch it
+# off again for most platforms ;) (MM)
+ld_shlibs=yes
+
+# Check if we are using GNU gcc  (taken/adapted from configure script)
+# We need to check here since "--with-gcc" is set at configure time,
+# not ltconfig time!
+cat > conftest.$ac_ext <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+if { ac_try='${CC-c++} -E conftest.$ac_ext'; { (eval echo \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+  with_gcc=yes
+
+  # Set up default GNU C++ configuration
+
+  # Check if GNU C++ uses GNU ld as the underlying linker, since the
+  # archiving commands below assume that GNU ld is being used.
+  if eval "`$CC -print-prog-name=ld` --version 2>&1" | \
+      egrep 'GNU ld' > /dev/null; then
+    with_gnu_ld=yes
+
+    archive_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    archive_expsym_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+    #     investigate it a little bit more. (MM)
+    wlarc='${wl}'
+
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+        egrep 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+  else
+    with_gnu_ld=no
+    wlarc=
+
+    # A generic and very simple default shared library creation
+    # command for GNU C++ for the case where it uses the native
+    # linker, instead of GNU ld.  If possible, this setting should
+    # overridden to take advantage of the native linker features on
+    # the platform it is being used on.
+    archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+  fi
+
+  # Commands to make compiler produce verbose output that lists
+  # what "hidden" libraries, object files and flags are used when
+  # linking a shared library.
+  output_verbose_link_cmds='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
+
+else
+  with_gcc=no
+  with_gnu_ld=no
+  wlarc=
+fi
+
+echo "ltcf-cxx: with_gcc=$with_gcc ; with_gnu_ld=$with_gnu_ld"
+
+# PORTME: fill in a description of your system's C++ link characteristics
+case $host_os in
+  aix3*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs=no
+    ;;
+  aix4* | aix5*)
+    archive_cmds=''
+    hardcode_direct=yes
+    hardcode_libdir_separator=':'
+    link_all_deplibs=yes
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+    if test "$with_gcc" = yes; then
+      case $host_os in aix4.[012]|aix4.[012].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+        collect2name=`${CC} -print-prog-name=collect2`
+        if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+        then
+	  # We have reworked collect2
+	  hardcode_direct=yes
+        else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+        fi
+      esac
+      shared_flag='-shared'
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+        shared_flag='${wl}-G'
+      else
+        shared_flag='${wl}-bM:SRE'
+      fi
+    fi
+
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      # KDE requires run time linking.  Make it the default.
+      aix_use_runtimelinking=yes
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+    # Let the compiler handle the export list.
+    always_export_symbols=no
+    if test "$aix_use_runtimelinking" = yes; then
+      allow_undefined_flag=' ${wl}-berok'
+      # The following three lines along with hardcode_into_libs=yes put the correct path into libraries.
+      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir${libdir:+:}/usr/lib:/lib'
+      archive_cmds='$CC '"$shared_flag"' $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-G '"$hardcode_libdir_flag_spec"' -o $lib'
+      archive_expsym_cmds='$CC '"$shared_flag"' $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-G '"$hardcode_libdir_flag_spec"' ${wl}'"$exp_sym_flag"':$export_symbols -o $lib'
+     else
+      if test "$host_cpu" = ia64; then
+        hardcode_libdir_flag_spec='${wl}-R $libdir${libdir:+:}/usr/lib:/lib'
+        allow_undefined_flag="-z nodefs"
+        archive_cmds='$CC '"$shared_flag"' $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags '"$hardcode_libdir_flag_spec"' -o $lib'
+        archive_expsym_cmds='$CC '"$shared_flag"' $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags '"$hardcode_libdir_flag_spec"' ${wl}'"$exp_sym_flag"':$export_symbols -o $lib'
+      else
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+        # Warning - without using the other run time loading flags, -berok will
+        #           link without error, but may produce a broken library.
+        no_undefined_flag='${wl}-bnoerok'
+        allow_undefined_flag='${wl}-berok"
+        # -bexpall does not export symbols beginning with underscore (_)
+        always_export_symbols=yes
+        # Exported symbols can be pulled into shared objects from archives
+        whole_archive_flag_spec=' '
+        build_libtool_need_lc=yes
+        # This is similar to how AIX traditionally builds it's shared libraries.
+        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
+    ;;
+  chorus*)
+    case $cc_basename in
+      *)
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+    esac
+    ;;
+  dgux*)
+    case $cc_basename in
+      ec++)
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+      ghcx)
+        # Green Hills C++ Compiler
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+      *)
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+    esac
+    ;;
+  freebsd*)
+    # FreeBSD uses GNU C++ and GNU ld
+    skip_need_lc_check=yes
+    remove_lgcc=yes
+    ;;
+  hpux*)
+    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_direct=yes
+    hardcode_minus_L=yes # Not in the search PATH, but as the default
+			 # location of the library.
+    export_dynamic_flag_spec='${wl}-E'
+
+    case $cc_basename in
+      CC)
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+      aCC)
+	case $host_os in
+	hpux9*) archive_cmds='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
+	*) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;;
+	esac
+        # Commands to make compiler produce verbose output that lists
+        # what "hidden" libraries, object files and flags are used when
+        # linking a shared library.
+        #
+        # There doesn't appear to be a way to prevent this compiler from
+        # explicitly linking system object files so we need to strip them
+        # from the output so that they don't get included in the library
+        # dependencies.
+        output_verbose_link_cmds='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+        ;;
+      *)
+        if test "$with_gcc" = yes && test "$with_gnu_ld" = no ; then
+	  # MM: for HP-UX and g++ -fPIC is needed to link pic objects together
+	  case $host_os in
+	  hpux9*) archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
+	  *) archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;;
+	  esac
+	  output_verbose_link_cmds='$CC -shared -fPIC $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
+	  remove_lgcc=yes
+        fi
+	if test "$with_gcc" = no ; then
+	  # FIXME: insert proper C++ library support
+          ld_shlibs=no
+	fi
+        ;;
+    esac
+    ;;
+  irix5* | irix6*)
+    case $cc_basename in
+      CC)
+        # SGI C++
+        archive_cmds='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+	# Archives containing C++ object files must be created using
+	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	old_archive_cmds='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	;;
+      *)
+        if test "$with_gcc" = yes; then
+          if test "$with_gnu_ld" = no; then
+            archive_cmds='$CC -D_LANGUAGE_C_CPLUS_PLUS -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+          else
+            archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
+          fi
+        fi
+        ;;
+    esac
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    link_all_deplibs=yes
+    ;;
+  linux*)
+    case $cc_basename in
+      KCC)
+        # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+        # KCC will only create a shared library if the output file
+        # ends with ".so" (or ".sl" for HP-UX), so rename the library
+        # to its proper name (with version) after linking.
+        archive_cmds='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+        archive_expsym_cmds='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+
+        # Commands to make compiler produce verbose output that lists
+        # what "hidden" libraries, object files and flags are used when
+        # linking a shared library.
+        #
+        # There doesn't appear to be a way to prevent this compiler from
+        # explicitly linking system object files so we need to strip them
+        # from the output so that they don't get included in the library
+        # dependencies.
+        output_verbose_link_cmds='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+        hardcode_libdir_flag_spec='${wl}--rpath,$libdir'
+        export_dynamic_flag_spec='${wl}--export-dynamic'
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+        old_archive_cmds='$CC -Bstatic -o $oldlib $oldobjs'
+        ;;
+      cxx)
+        # Compaq C++
+        archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        archive_expsym_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+        runpath_var=LD_RUN_PATH
+        hardcode_libdir_flag_spec='-rpath $libdir'
+        hardcode_libdir_separator=:
+
+        # Commands to make compiler produce verbose output that lists
+        # what "hidden" libraries, object files and flags are used when
+        # linking a shared library.
+        #
+        # There doesn't appear to be a way to prevent this compiler from
+        # explicitly linking system object files so we need to strip them
+        # from the output so that they don't get included in the library
+        # dependencies.
+        output_verbose_link_cmds='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+        ;;
+      insure)
+        if test "$with_gcc" = yes; then
+	  # Insure++ together with gcc probably means also GNU ld
+	  # only -whole-archive isn't supported
+	  whole_archive_flag_spec=""
+	  # and we can't use -nostdlib, because bloody insure has no way to
+	  # output the linkline (-Zvm isn't working as documented), so we don't
+	  # know the depending libs. So we hope, insure gets it right anyway.
+	  archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  runpath_var=LD_RUN_PATH
+	  hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+	  export_dynamic_flag_spec='${wl}--export-dynamic'
+	  output_verbose_link_cmds=""
+	fi
+    esac
+    ;;
+  lynxos*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs=no
+    ;;
+  m88k*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs=no
+    ;;
+  mvs*)
+    case $cc_basename in
+      cxx)
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+      *)
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+    esac
+    ;;
+  netbsd*)
+    if test "$with_gcc" = no || test "$with_gnu_ld" = no; then
+      # This should only be triggered for NetBSD/a.out
+      # Add in C++ constructor/destructor support
+      if test -f /usr/pkg/lib/c++rt0/c++rt0.o.PIC; then
+        cppopts="/usr/pkg/lib/c++rt0/c++rt0.o.PIC"
+      elif test -f /usr/lib/c++rt0.o; then
+        cppopts="/usr/lib/c++rt0.o"
+      fi
+      archive_cmds='ld -Bshareable -o $lib '"$cppopts"' $libobjs $deplibs $linkopts'
+    fi
+    ;;
+  openbsd*)
+    if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then
+      # MM: OpenBSD 2.7 uses G++, but not GNU ld
+      archive_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      archive_expsym_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      old_archive_cmds="$old_archive_cmds~"'$RANLIB $oldlib'
+      hardcode_libdir_flag_spec='${wl}-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      whole_archive_flag_spec='${wl}-Bforcearchive'
+      remove_lgcc=yes
+    fi
+    ;;
+  osf3*)
+    if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmds='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
+    else
+      case $cc_basename in
+	KCC)
+	  # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	  # KCC will only create a shared library if the output file
+	  # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	  # to its proper name (with version) after linking.
+	  archive_cmds='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  hardcode_libdir_separator=:
+
+	  # Archives containing C++ object files must be created using
+	  # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	  old_archive_cmds='$CC -Bstatic -o $oldlib $oldobjs'
+
+	  ;;
+	RCC)
+	  # Rational C++ 2.4.1
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs=no
+	  ;;
+	cxx)
+	  allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	  archive_cmds='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_separator=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  #
+	  # There doesn't appear to be a way to prevent this compiler from
+	  # explicitly linking system object files so we need to strip them
+	  # from the output so that they don't get included in the library
+	  # dependencies.
+	  output_verbose_link_cmds='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	  ;;
+	*)
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs=no
+	  ;;
+      esac
+    fi
+    ;;
+  osf4* | osf5*)
+    if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then
+      allow_undefined_flag=' -Wl,-expect_unresolved -Wl,\*'
+      no_undefined_flag=' -Wl,-expect_unresolved -Wl,\*'
+      archive_cmds='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmds='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
+    else
+      case $cc_basename in
+	KCC)
+	  # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	  # KCC will only create a shared library if the output file
+	  # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	  # to its proper name (with version) after linking.
+	  archive_cmds='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  hardcode_libdir_separator=:
+
+	  # Archives containing C++ object files must be created using
+	  # the KAI C++ compiler.
+	  old_archive_cmds='$CC -o $oldlib $oldobjs'
+	  ;;
+	RCC)
+	  # Rational C++ 2.4.1
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs=no
+	  ;;
+	cxx)
+	  allow_undefined_flag=' -Wl,-expect_unresolved -Wl,\*'
+	  no_undefined_flag=' -Wl,-expect_unresolved -Wl,\*'
+	  archive_cmds='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -update_registry ${objdir}/so_locations -o $lib'
+	  
+	  hardcode_libdir_flag_spec='-rpath $libdir'
+	  hardcode_libdir_separator=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  #
+	  # There doesn't appear to be a way to prevent this compiler from
+	  # explicitly linking system object files so we need to strip them
+	  # from the output so that they don't get included in the library
+	  # dependencies.
+	  output_verbose_link_cmds='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	  ;;
+	*)
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs=no
+	  ;;
+      esac
+    fi
+    ;;
+  psos*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs=no
+    ;;
+  sco*)
+    case $cc_basename in
+      CC)
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+      *)
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+    esac
+    ;;
+  sunos4*)
+    case $cc_basename in
+      CC)
+        # Sun C++ 4.x
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+      lcc)
+        # Lucid
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+      *)
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+    esac
+    ;;
+  solaris*)
+    case $cc_basename in
+      CC)
+	# Sun C++ 4.2, 5.x and Centerline C++
+        no_undefined_flag=' -ztext'
+        archive_cmds='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+        archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+        $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+        hardcode_libdir_flag_spec='-R$libdir'
+        hardcode_shlibpath_var=no
+        case $host_os in
+          solaris2.[0-5] | solaris2.[0-5].*) ;;
+          *)
+            # The C++ compiler is used as linker so we must use $wl
+            # flag to pass the commands to the underlying system
+            # linker.
+            # Supported since Solaris 2.6 (maybe 2.5.1?)
+            whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+            ;;
+        esac
+        link_all_deplibs=yes
+
+        # Commands to make compiler produce verbose output that lists
+        # what "hidden" libraries, object files and flags are used when
+        # linking a shared library.
+        #
+        # There doesn't appear to be a way to prevent this compiler from
+        # explicitly linking system object files so we need to strip them
+        # from the output so that they don't get included in the library
+        # dependencies.
+        output_verbose_link_cmds='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+	# Archives containing C++ object files must be created using
+	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
+        # necessary to make sure instantiated templates are included
+        # in the archive.
+        old_archive_cmds='$CC -xar -o $oldlib $oldobjs'
+        ;;
+      gcx)
+        # Green Hills C++ Compiler
+        archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+        # The C++ compiler must be used to create the archive.
+        old_archive_cmds='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+        ;;
+      *)
+        # GNU C++ compiler with Solaris linker
+        if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then
+          if $CC --version | egrep -v '^2\.7' > /dev/null; then
+            archive_cmds='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
+            archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'
+
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            output_verbose_link_cmds="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
+          else
+            # g++ 2.7 appears to require `-G' NOT `-shared' on this
+            # platform.
+            archive_cmds='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
+            archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'
+
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            output_verbose_link_cmds="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
+          fi
+
+          hardcode_libdir_flag_spec='${wl}-R $wl$libdir'
+        fi
+        ;;
+    esac
+    ;;
+  tandem*)
+    case $cc_basename in
+      NCC)
+        # NonStop-UX NCC 3.20
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+      *)
+        # FIXME: insert proper C++ library support
+        ld_shlibs=no
+        ;;
+    esac
+    ;;
+  unixware*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs=no
+    ;;
+  vxworks*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs=no
+    ;;
+  *)
+    # FIXME: insert proper C++ library support
+    ld_shlibs=no
+    ;;
+esac
+
+
+## Compiler Characteristics: PIC flags, static flags, etc
+
+# We don't use cached values here since only the C compiler
+# characteristics should be cached.
+ac_cv_prog_cc_pic=
+ac_cv_prog_cc_shlib=
+ac_cv_prog_cc_wl=
+ac_cv_prog_cc_static=
+ac_cv_prog_cc_no_builtin=
+ac_cv_prog_cc_can_build_shared=$can_build_shared
+
+ac_cv_prog_cc_pic_works=
+ac_cv_prog_cc_static_works=
+
+if test "$with_gcc" = yes; then
+  ac_cv_prog_cc_wl='-Wl,'
+  ac_cv_prog_cc_static='-static'
+
+  case $host_os in
+  aix*)
+    # All AIX code is PIC.
+    if test "$host_cpu" = ia64; then
+      # AIX 5 now supports IA64 processor
+      lt_cv_prog_cc_static='-Bstatic'
+    else
+      lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+    fi
+    ;;
+  amigaos*)
+    # FIXME: we need at least 68020 code to build shared libraries, but
+    # adding the `-m68020' flag to GCC prevents building anything better,
+    # like `-m68040'.
+    ac_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+    ;;
+  beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+    # PIC is the default for these OSes.
+    ;;
+  cygwin* | mingw* | os2*)
+    # This hack is so that the source file can tell whether it is being
+    # built for inclusion in a dll (and should export symbols for example).
+    ac_cv_prog_cc_pic='-DDLL_EXPORT'
+    ;;
+  darwin* | rhapsody*)
+    # PIC is the default on this platform
+    # Common symbols not allowed in MH_DYLIB files
+    lt_cv_prog_cc_pic='-fno-common'
+    ;;
+  *djgpp*)
+    # DJGPP does not support shared libraries at all
+    ac_cv_prog_cc_pic=
+    ;;
+  sysv4*MP*)
+    if test -d /usr/nec; then
+      ac_cv_prog_cc_pic=-Kconform_pic
+    fi
+    ;;
+  *)
+    ac_cv_prog_cc_pic='-fPIC'
+    ;;
+  esac
+else
+  case $host_os in
+    aix4* | aix5*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+        # AIX 5 now supports IA64 processor
+        lt_cv_prog_cc_static='-Bstatic'
+      else
+        lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+    chorus*)
+      case $cc_basename in
+      cxch68)
+        # Green Hills C++ Compiler
+        # ac_cv_prog_cc_static="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+        ;;
+      esac
+      ;;
+    dgux*)
+      case $cc_basename in
+        ec++)
+          ac_cv_prog_cc_pic='-KPIC'
+          ;;
+        ghcx)
+          # Green Hills C++ Compiler
+          ac_cv_prog_cc_pic='-pic'
+          ;;
+        *)
+          ;;
+      esac
+      ;;
+    freebsd*)
+      # FreeBSD uses GNU C++
+      ;;
+    hpux9* | hpux10* | hpux11*)
+      case $cc_basename in
+        CC)
+          ac_cv_prog_cc_wl='-Wl,'
+          ac_cv_prog_cc_static="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+          ac_cv_prog_cc_pic='+Z'
+          ;;
+        aCC)
+          ac_cv_prog_cc_wl='-Wl,'
+          ac_cv_prog_cc_static="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+          ac_cv_prog_cc_pic='+Z'
+          ;;
+        *)
+          ;;
+      esac
+      ;;
+    irix5* | irix6*)
+      case $cc_basename in
+        CC)
+          ac_cv_prog_cc_wl='-Wl,'
+          ac_cv_prog_cc_static='-non_shared'
+          ac_cv_prog_cc_pic='-KPIC'
+          ;;
+        *)
+          ;;
+      esac
+      ;;
+    linux*)
+      case $cc_basename in
+        KCC)
+          # KAI C++ Compiler
+          ac_cv_prog_cc_wl='--backend -Wl,'
+          ac_cv_prog_cc_pic='-fPIC'
+          ;;
+        cxx)
+          # Compaq C++
+          # Make sure the PIC flag is empty.  It appears that all Alpha
+          # Linux and Compaq Tru64 Unix objects are PIC.
+          ac_cv_prog_cc_pic=
+          ac_cv_prog_cc_static='-non_shared'
+          ;;
+        *)
+          ;;
+      esac
+      ;;
+    lynxos*)
+      ;;
+    m88k*)
+      ;;
+    mvs*)
+      case $cc_basename in
+        cxx)
+          ac_cv_prog_cc_pic='-W c,exportall'
+          ;;
+        *)
+          ;;
+      esac
+      ;;
+    netbsd*)
+      ;;
+    osf3* | osf4* | osf5*)
+      case $cc_basename in
+        KCC)
+          ac_cv_prog_cc_wl='--backend -Wl,'
+          ;;
+        RCC)
+          # Rational C++ 2.4.1
+          ac_cv_prog_cc_pic='-pic'
+          ;;
+        cxx)
+          # Digital/Compaq C++
+          ac_cv_prog_cc_wl='-Wl,'
+          # Make sure the PIC flag is empty.  It appears that all Alpha
+          # Linux and Compaq Tru64 Unix objects are PIC.
+          ac_cv_prog_cc_pic=
+          ac_cv_prog_cc_static='-non_shared'
+          ;;
+        *)
+          ;;
+      esac
+      ;;
+    psos*)
+      ;;
+    sco*)
+      case $cc_basename in
+        CC)
+          ac_cv_prog_cc_pic='-fPIC'
+          ;;
+        *)
+          ;;
+      esac
+      ;;
+    solaris*)
+      case $cc_basename in
+        CC)
+          # Sun C++ 4.2, 5.x and Centerline C++
+          ac_cv_prog_cc_pic='-KPIC'
+          ac_cv_prog_cc_static='-Bstatic'
+          ac_cv_prog_cc_wl='-Qoption ld '
+          ;;
+        gcx)
+          # Green Hills C++ Compiler
+          ac_cv_prog_cc_pic='-PIC'
+          ;;
+        *)
+          ;;
+      esac
+      ;;
+    sunos4*)
+      case $cc_basename in
+        CC)
+          # Sun C++ 4.x
+          ac_cv_prog_cc_pic='-pic'
+          ac_cv_prog_cc_static='-Bstatic'
+          ;;
+        lcc)
+          # Lucid
+          ac_cv_prog_cc_pic='-pic'
+          ;;
+        *)
+          ;;
+      esac
+      ;;
+    tandem*)
+      case $cc_basename in
+        NCC)
+          # NonStop-UX NCC 3.20
+          ac_cv_prog_cc_pic='-KPIC'
+          ;;
+        *)
+          ;;
+      esac
+      ;;
+    unixware*)
+      ;;
+    vxworks*)
+      ;;
+    *)
+      ac_cv_prog_cc_can_build_shared=no
+      ;;
+  esac
+fi
+
+case "$host_os" in
+    # Platforms which do not suport PIC and -DPIC is meaningless
+    # on them:
+    *djgpp*)
+      ac_cv_prog_cc_pic=
+      ;;
+    *)
+      ac_cv_prog_cc_pic="$ac_cv_prog_cc_pic -DPIC"
+      ;;
+esac
+
+
+# Figure out "hidden" C++ library dependencies from verbose
+# compiler output whening linking a shared library.
+cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+EOF
+
+
+if (eval $ac_compile) 2>&5; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval $output_verbose_link_cmds`; do
+
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" \
+          || test $p = "-R"; then
+         prev=$p
+         continue
+       else
+         prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+         case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+           if test -z "$compiler_lib_search_path"; then
+             compiler_lib_search_path="${prev}${p}"
+           else
+             compiler_lib_search_path="${compiler_lib_search_path} ${prev}${p}"
+           fi
+           ;;
+         # The "-l" case would never come before the object being
+         # linked, so don't bother handling this case.
+         esac
+       else
+	 add="${prev}${p}"
+	 if test "x$remove_lgcc" = "xyes" ; then
+	   case "$add" in
+	     -lgcc ) add="" ;;
+	   esac
+	 fi
+	 if test -n "$add" ; then
+           if test -z "$postdeps"; then
+             postdeps="$add"
+           else
+             postdeps="${postdeps} ${add}"
+           fi
+         fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+         pre_test_object_deps_done=yes
+         continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+         if test -z "$predep_objects"; then
+           predep_objects="$p"
+         else
+           predep_objects="$predep_objects $p"
+         fi
+       else
+         if test -z "$postdep_objects"; then
+           postdep_objects="$p"
+         else
+           postdep_objects="$postdep_objects $p"
+         fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out
+else
+  echo "ltcf-cxx.sh: error: problem compiling test program"
+fi
+
+$rm -f confest.$objext
+
+if test "x$skip_need_lc_check" = "xyes" ; then
+  need_lc=no
+else
+  case " $postdeps " in
+  *" -lc "*) need_lc=no ;;
+  *) need_lc=yes ;;
+  esac
+fi
diff --git a/krozat/admin/ltcf-gcj.sh b/krozat/admin/ltcf-gcj.sh
new file mode 100644
index 0000000..fb407ad
--- /dev/null
+++ b/krozat/admin/ltcf-gcj.sh
@@ -0,0 +1,636 @@
+#### This script is meant to be sourced by ltconfig.
+
+# ltcf-gcj.sh - Create a GCJ compiler specific configuration
+#
+# Copyright (C) 1996-1999, 2000, 2001 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# Original GCJ support by:
+#    Alexandre Oliva <oliva@lsd.ic.unicamp.br>
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
+
+## Linker Characteristics
+case $host_os in
+cygwin* | mingw*)
+  # FIXME: the MSVC++ port hasn't been tested in a loooong time
+  # When not using gcc, we currently assume that we are using
+  # Microsoft Visual C++.
+  if test "$with_gcc" != yes; then
+    with_gnu_ld=no
+  fi
+  ;;
+
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # If archive_cmds runs LD, not CC, wlarc should be empty
+  wlarc='${wl}'
+
+  # See if GNU ld supports shared libraries.
+  case $host_os in
+  aix3* | aix4*)
+    # On AIX, the GNU linker is very broken
+    ld_shlibs=no
+    cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+
+    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+    # that the semantics of dynamic libraries on AmigaOS, at least up
+    # to version 4, is to share data among multiple programs linked
+    # with the same dynamic library.  Since this doesn't match the
+    # behavior of shared libraries on other platforms, we can use
+    # them.
+    ld_shlibs=no
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  cygwin* | mingw*)
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec='-L$libdir'
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+
+    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
+      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/impgen.c~
+      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
+      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
+      else $CC -o impgen impgen.c ; fi)~
+      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
+
+    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
+
+    # cygwin and mingw dlls have different entry points and sets of symbols
+    # to exclude.
+    # FIXME: what about values for MSVC?
+    dll_entry=__cygwin_dll_entry@12
+    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
+    case $host_os in
+    mingw*)
+      # mingw values
+      dll_entry=_DllMainCRTStartup@12
+      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
+      ;;
+    esac
+
+    # mingw and cygwin differ, and it's simplest to just exclude the union
+    # of the two symbol sets.
+    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
+
+    # recent cygwin and mingw systems supply a stub DllMain which the user
+    # can override, but on older systems we have to supply one (in ltdll.c)
+    if test "x$lt_cv_need_dllmain" = "xyes"; then
+      ltdll_obj='$output_objdir/$soname-ltdll.'"$objext "
+      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/$soname-ltdll.c~
+	test -f $output_objdir/$soname-ltdll.$objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
+    else
+      ltdll_obj=
+      ltdll_cmds=
+    fi
+
+    # Extract the symbol export list from an `--export-all' def file,
+    # then regenerate the def file from the symbol export list, so that
+    # the compiled dll only exports the symbol export list.
+    # Be careful not to strip the DATA tag left be newer dlltools.
+    export_symbols_cmds="$ltdll_cmds"'
+      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
+      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
+
+    # If the export-symbols file already is a .def file (1st line
+    # is EXPORTS), use it as is.
+    # If DATA tags from a recent dlltool are present, honour them!
+    archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
+        cp $export_symbols $output_objdir/$soname-def;
+      else
+        echo EXPORTS > $output_objdir/$soname-def;
+        _lt_hint=1;
+        cat $export_symbols | while read symbol; do
+         set dummy \$symbol;
+         case \[$]# in
+           2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+           *) echo "     \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
+         esac;
+         _lt_hint=`expr 1 + \$_lt_hint`;
+        done;
+      fi~
+      '"$ltdll_cmds"'
+      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
+      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
+      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+      wlarc=
+    else
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    fi
+    ;;
+
+  solaris* | sysv5*)
+    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+      ld_shlibs=no
+      cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+    wlarc=
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+  esac
+
+  if test "$ld_shlibs" = yes; then
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    case $host_os in
+    cygwin* | mingw*)
+      # dlltool doesn't understand --whole-archive et. al.
+      whole_archive_flag_spec=
+      ;;
+    *)
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+	whole_archive_flag_spec=
+      fi
+      ;;
+    esac
+  fi
+else
+  # PORTME fill in a description of your system's linker (not GNU ld)
+  case $host_os in
+  aix3*)
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+    # Note: this linker hardcodes the directories in LIBPATH if there
+    # are no directories specified by -L.
+    hardcode_minus_L=yes
+    if test "$with_gcc" = yes && test -z "$link_static_flag"; then
+      # Neither direct hardcoding nor static linking is supported with a
+      # broken collect2.
+      hardcode_direct=unsupported
+    fi
+    ;;
+
+  aix4* | aix5*)
+    hardcode_direct=yes
+    hardcode_libdir_separator=':'
+    link_all_deplibs=yes
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+    if test "$with_gcc" = yes; then
+      case $host_os in aix4.[012]|aix4.[012].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+        collect2name=`${CC} -print-prog-name=collect2`
+        if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+        then
+	  # We have reworked collect2
+	  hardcode_direct=yes
+        else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+        fi
+      esac
+      shared_flag='-shared'
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+        shared_flag='${wl}-G'
+      else
+        shared_flag='${wl}-bM:SRE'
+      fi
+    fi
+
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      # Test if we are trying to use run time linking, or normal AIX style linking.
+      # If -brtl is somewhere in LDFLAGS, we need to do run time linking.
+      aix_use_runtimelinking=no
+      for ld_flag in $LDFLAGS; do
+        if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then
+          aix_use_runtimelinking=yes
+          break
+        fi
+      done
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+    # -bexpall does not export symbols beginning with underscore (_)
+    always_export_symbols=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other run time loading flags (-brtl), -berok will
+      #           link without error, but may produce a broken library.
+      allow_undefined_flag=' ${wl}-berok'
+      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+      archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+    else
+      if test "$host_cpu" = ia64; then
+        hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+        allow_undefined_flag="-z nodefs"
+        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+      else
+        allow_undefined_flag=' ${wl}-berok'
+        # -bexpall does not export symbols beginning with underscore (_)
+        always_export_symbols=yes
+        # Exported symbols can be pulled into shared objects from archives
+        whole_archive_flag_spec=' '
+        build_libtool_need_lc=yes
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+        # This is similar to how AIX traditionally builds it's shared libraries.
+        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
+  ;;
+
+  amigaos*)
+    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    # see comment about different semantics on the GNU ld section
+    ld_shlibs=no
+    ;;
+
+  cygwin* | mingw*)
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec=' '
+    allow_undefined_flag=unsupported
+    # Tell ltmain to make .lib files, not .a files.
+    libext=lib
+    # FIXME: Setting linknames here is a bad hack.
+    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+    # The linker will automatically build a .lib file if we build a DLL.
+    old_archive_from_new_cmds='true'
+    # FIXME: Should let the user specify the lib program.
+    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+    fix_srcfile_path='`cygpath -w "$srcfile"`'
+    ;;
+
+  freebsd1*)
+    ld_shlibs=no
+    ;;
+
+  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+  # support.  Future versions do this automatically, but an explicit c++rt0.o
+  # does not break anything, and helps significantly (at the cost of a little
+  # extra space).
+  freebsd2.2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+  freebsd2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+  freebsd*)
+    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    case $host_os in
+    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
+    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
+    esac
+    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_direct=yes
+    hardcode_minus_L=yes # Not in the search PATH, but as the default
+			 # location of the library.
+    export_dynamic_flag_spec='${wl}-E'
+    ;;
+
+  irix5* | irix6*)
+    if test "$with_gcc" = yes; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    link_all_deplibs=yes
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+    else
+      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+    fi
+    hardcode_libdir_flag_spec='${wl}-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  openbsd*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  os2*)
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    allow_undefined_flag=unsupported
+    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+    ;;
+
+  osf3*)
+    if test "$with_gcc" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  osf4* | osf5*)	# as osf3* with the addition of -msym flag
+    if test "$with_gcc" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  sco3.2v5*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_shlibpath_var=no
+    runpath_var=LD_RUN_PATH
+    hardcode_runpath_var=yes
+    ;;
+
+  solaris*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_shlibpath_var=no
+    case $host_os in
+    solaris2.[0-5] | solaris2.[0-5].*) ;;
+    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+    esac
+    link_all_deplibs=yes
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+    ;;
+
+  sysv4.3*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_shlibpath_var=no
+    export_dynamic_flag_spec='-Bexport'
+    ;;
+
+  sysv5*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+    hardcode_libdir_flag_spec=
+    hardcode_shlibpath_var=no
+    runpath_var='LD_RUN_PATH'
+    ;;
+
+  uts4*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  dgux*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4*MP*)
+    if test -d /usr/nec; then
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      runpath_var=LD_RUN_PATH
+      hardcode_runpath_var=yes
+      ld_shlibs=yes
+    fi
+    ;;
+
+  sysv4.2uw2*)
+    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_direct=yes
+    hardcode_minus_L=no
+    hardcode_shlibpath_var=no
+    hardcode_runpath_var=yes
+    runpath_var=LD_RUN_PATH
+    ;;
+
+  unixware7*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    ld_shlibs=no
+    ;;
+  esac
+fi
+
+## Compiler Characteristics: PIC flags, static flags, etc
+
+# We don't use cached values here since only the C compiler
+# characteristics should be cached.
+  ac_cv_prog_cc_pic=
+  ac_cv_prog_cc_shlib=
+  ac_cv_prog_cc_wl=
+  ac_cv_prog_cc_static=
+  ac_cv_prog_cc_no_builtin=
+  ac_cv_prog_cc_can_build_shared=$can_build_shared
+
+    ac_cv_prog_cc_wl='-Wl,'
+    ac_cv_prog_cc_static='-static'
+
+    case $host_os in
+    beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    aix*)
+      # Below there is a dirty hack to force normal static linking with -ldl
+      # The problem is because libdl dynamically linked with both libc and
+      # libC (AIX C++ library), which obviously doesn't included in libraries
+      # list by gcc. This cause undefined symbols with -static flags.
+      # This hack allows C programs to be linked with "-static -ldl", but
+      # we not sure about C++ programs.
+      ac_cv_prog_cc_static="$ac_cv_prog_cc_static ${ac_cv_prog_cc_wl}-lC"
+      ;;
+    *djgpp*)
+      # DJGPP does not suppot shared libraries at all
+      ac_cv_prog_cc_pic=
+      ;;
+    cygwin* | mingw* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      ac_cv_prog_cc_pic='-DDLL_EXPORT'
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      ac_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	 ac_cv_prog_cc_pic=-Kconform_pic
+      fi
+      ;;
+    *)
+      ac_cv_prog_cc_pic='-fPIC'
+      ;;
+    esac
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+need_lc=no
+
+# All existing releases of GCJ support `-c -o'.
+lt_cv_compiler_c_o=yes
diff --git a/krozat/admin/ltconfig b/krozat/admin/ltconfig
new file mode 100755
index 0000000..caefe9f
--- /dev/null
+++ b/krozat/admin/ltconfig
@@ -0,0 +1,2794 @@
+#! /bin/sh
+
+# ltconfig - Create a system-specific libtool.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A lot of this script is taken from autoconf-2.10.
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+echo=echo
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec "$SHELL" "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# Find the correct PATH separator.  Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+  UNAME=${UNAME-`uname 2>/dev/null`}
+  case X$UNAME in
+    *-DOS) PATH_SEPARATOR=';' ;;
+    *)     PATH_SEPARATOR=':' ;;
+  esac
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test "X${echo_test_string+set}" != Xset; then
+  # find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+       echo_test_string="`eval $cmd`" &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+  for dir in $PATH /usr/ucb; do
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running ltconfig again with it.
+      ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+	 test "X$echo_testing_string" = "X$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif echo_testing_string=`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      elif echo_testing_string=`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "$0"'; then
+	  echo_test_string=`eval $prev`
+	  
+	  export echo_test_string
+	  exec "${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}}" "$0" ${1+"$@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# The name of this program.
+progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
+
+# Constants:
+PROGRAM=ltconfig
+PACKAGE=libtool
+VERSION=1.4a
+TIMESTAMP=" (1.641.2.206mm 2001/04/03 21:47:47)"
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+rm="rm -f"
+
+help="Try \`$progname --help' for more information."
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+enable_shared=yes
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+enable_static=yes
+enable_fast_install=yes
+enable_dlopen=unknown
+enable_win32_dll=no
+pic_mode=default
+ltmain=
+silent=
+srcdir=
+ac_config_guess=
+ac_config_sub=
+host=
+build=NONE
+nonopt=NONE
+ofile="$default_ofile"
+verify_host=yes
+tagname=
+with_gcc=no
+with_gnu_ld=no
+need_locks=yes
+ac_ext=c
+libext=a
+cache_file=
+max_cmd_len=
+
+## Dependencies to place before and after the object being linked:
+predep_objects=
+postdep_objects=
+predeps=
+postdeps=
+compiler_lib_search_path=
+
+## Link characteristics:
+allow_undefined_flag=
+no_undefined_flag=
+need_lib_prefix=unknown
+need_version=unknown
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+archive_cmds=
+archive_expsym_cmds=
+old_archive_from_new_cmds=
+old_archive_from_expsyms_cmds=
+striplib=
+old_striplib=
+export_dynamic_flag_spec=
+whole_archive_flag_spec=
+thread_safe_flag_spec=
+hardcode_into_libs=no
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+hardcode_shlibpath_var=unsupported
+runpath_var=
+link_all_deplibs=unknown
+always_export_symbols=no
+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+include_expsyms=
+# exclude_expsyms can be an egrep regular expression of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced.  Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+extract_expsyms_cmds=
+
+## Tools:
+old_AR="$AR"
+old_AR_FLAGS="$AR_FLAGS"
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+old_CPPFLAGS="$CPPFLAGS"
+old_LDFLAGS="$LDFLAGS"
+old_LIBS="$LIBS"
+old_MAGIC_CMD="$MAGIC_CMD"
+old_LD="$LD"
+old_LN_S="$LN_S"
+old_LTCC="$LTCC"
+old_NM="$NM"
+old_RANLIB="$RANLIB"
+old_STRIP="$STRIP"
+old_AS="$AS"
+old_DLLTOOL="$DLLTOOL"
+old_OBJDUMP="$OBJDUMP"
+old_OBJEXT="$OBJEXT"
+old_EXEEXT="$EXEEXT"
+old_reload_flag="$reload_flag"
+old_deplibs_check_method="$deplibs_check_method"
+old_file_magic_cmd="$file_magic_cmd"
+
+# Parse the command line options.
+args=
+prev=
+for option
+do
+  case $option in
+  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    eval "$prev=\$option"
+    prev=
+    continue
+  fi
+
+  case $option in
+  --help) cat <<EOM
+Usage: $progname [OPTION]... LTMAIN [HOST]
+
+Generate a system-specific libtool script.
+
+    --build                configure for building on BUILD [BUILD=HOST]
+    --debug                enable verbose shell tracing
+    --disable-shared       do not build shared libraries
+    --disable-static       do not build static libraries
+    --disable-fast-install do not optimize for fast installation
+    --enable-dlopen        enable dlopen support
+    --enable-win32-dll     enable building dlls on win32 hosts
+    --help                 display this help and exit
+    --no-verify            do not verify that HOST is a valid host type
+-o, --output=FILE          specify the output file [default=$default_ofile]
+    --quiet                same as \`--silent'
+    --silent               do not print informational messages
+    --srcdir=DIR           find \`config.guess' in DIR
+    --version              output version information and exit
+    --add-tag=TAG          append an alternate configuration
+    --with-gcc             assume that the GNU C compiler will be used
+    --with-gnu-ld          assume that the C compiler uses the GNU linker
+    --prefer-pic           try to use only PIC objects
+    --prefer-non-pic       try to use only non-PIC objects
+    --disable-lock         disable file locking
+    --cache-file=FILE      configure cache file
+
+LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
+that provides basic libtool functionality.
+
+HOST is the canonical host system name [default=guessed].
+EOM
+  exit 0
+  ;;
+
+  --build) prev=build ;;
+  --build=*) build="$optarg" ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --disable-shared) enable_shared=no ;;
+
+  --disable-static) enable_static=no ;;
+
+  --disable-fast-install) enable_fast_install=no ;;
+
+  --enable-dlopen) enable_dlopen=yes ;;
+
+  --enable-win32-dll) enable_win32_dll=yes ;;
+
+  --quiet | --silent) silent=yes ;;
+
+  --srcdir) prev=srcdir ;;
+  --srcdir=*) srcdir="$optarg" ;;
+
+  --no-verify) verify_host=no ;;
+
+  --output | -o) prev=ofile ;;
+  --output=*) ofile="$optarg" ;;
+
+  --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;
+
+  --add-tag) prev=tagname ;;
+  --add-tag=*) tagname="$optarg" ;;
+
+  --with-gcc) with_gcc=yes ;;
+  --with-gnu-ld) with_gnu_ld=yes ;;
+
+  --prefer-pic) pic_mode=yes ;;
+  --prefer-non-pic) pic_mode=no ;;
+
+  --disable-lock) need_locks=no ;;
+
+  --cache-file=*) cache_file="$optarg" ;;
+
+  -*)
+    echo "$progname: unrecognized option \`$option'" 1>&2
+    echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    if test -z "$ltmain"; then
+      ltmain="$option"
+    elif test -z "$host"; then
+# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
+#      if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
+#        echo "$progname: warning \`$option' is not a valid host type" 1>&2
+#      fi
+      host="$option"
+    else
+      echo "$progname: too many arguments" 1>&2
+      echo "$help" 1>&2
+      exit 1
+    fi ;;
+  esac
+done
+
+if test -z "$ltmain"; then
+  echo "$progname: you must specify a LTMAIN file" 1>&2
+  echo "$help" 1>&2
+  exit 1
+fi
+
+if test ! -f "$ltmain"; then
+  echo "$progname: \`$ltmain' does not exist" 1>&2
+  echo "$help" 1>&2
+  exit 1
+fi
+
+if test -n "$tagname"; then
+  # Check whether tagname contains only valid characters
+  case `$echo "X$tagname" | $Xsed -e 's/[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]//g'` in
+  "") ;;
+  *)
+    echo "$progname: invalid tag name: $tagname" 1>&2
+    exit 1
+    ;;
+  esac
+
+  if grep "^### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$ofile" > /dev/null; then
+    echo "$progname: tag name $tagname already exists" 1>&2
+    exit 1
+  fi
+
+  if test ! -f "$ofile"; then
+    echo "$progname: warning: output file \`$ofile' does not exist" 1>&2
+  fi
+
+  if test -z "$LTCC"; then
+    eval "`$SHELL $ofile --config | grep '^LTCC='`"
+    if test -z "$LTCC"; then
+      echo "$progname: warning: output file \`$ofile' does not look like a libtool script" 1>&2
+    else
+      echo "$progname: warning: using \`LTCC=$LTCC', extracted from \`$ofile'" 1>&2
+    fi
+  fi
+fi
+
+# Quote any args containing shell metacharacters.
+ltconfig_args=
+for arg
+do
+  case $arg in
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ltconfig_args="$ltconfig_args '$arg'" ;;
+  *) ltconfig_args="$ltconfig_args $arg" ;;
+  esac
+done
+
+# A relevant subset of AC_INIT.
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 5 compiler messages saved in config.log
+# 6 checking for... messages and results
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>>./config.log
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi
+if test "X${LANG+set}"   = Xset; then LANG=C;   export LANG;   fi
+
+if test -n "$cache_file" && test -r "$cache_file" && test -f "$cache_file"; then
+  echo "loading cache $cache_file within ltconfig"
+  . $cache_file
+fi
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+if test -z "$srcdir"; then
+  # Assume the source directory is the same one as the path to LTMAIN.
+  srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
+  test "$srcdir" = "$ltmain" && srcdir=.
+fi
+
+trap "$rm conftest*; exit 1" 1 2 15
+if test "$verify_host" = yes; then
+  # Check for config.guess and config.sub.
+  ac_aux_dir=
+  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+    if test -f $ac_dir/config.guess; then
+      ac_aux_dir=$ac_dir
+      break
+    fi
+  done
+  if test -z "$ac_aux_dir"; then
+    echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
+    echo "$help" 1>&2
+    exit 1
+  fi
+  ac_config_guess=$ac_aux_dir/config.guess
+  ac_config_sub=$ac_aux_dir/config.sub
+
+  # Make sure we can run config.sub.
+  if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
+  else
+    echo "$progname: cannot run $ac_config_sub" 1>&2
+    echo "$help" 1>&2
+    exit 1
+  fi
+
+  echo $ac_n "checking host system type""... $ac_c" 1>&6
+
+  host_alias=$host
+  case $host_alias in
+  "")
+    # Force config.guess to use the C compiler.
+    # CC_FOR_BUILD overrides the CC variable in config.guess but I had
+    # problems with it so do it this way for now.
+    CC="$LTCC"
+
+    if host_alias=`$SHELL $ac_config_guess`; then :
+    else
+      echo "$progname: cannot guess host type; you must specify one" 1>&2
+      echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Restore the C compiler.
+    CC="$old_CC"
+    ;;
+  esac
+  host=`$SHELL $ac_config_sub $host_alias`
+  echo "$ac_t$host" 1>&6
+
+  # Make sure the host verified.
+  test -z "$host" && exit 1
+
+  # Check for the build system type
+  echo $ac_n "checking build system type... $ac_c" 1>&6
+
+  build_alias=$build
+  case $build_alias in
+  NONE)
+    case $nonopt in
+    NONE) build_alias=$host_alias ;;
+    *) build_alias=$nonopt ;;
+    esac ;;
+  esac
+
+  build=`$SHELL $ac_config_sub $build_alias`
+  build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+  build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+  build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+  echo "$ac_t""$build" 1>&6
+
+elif test -z "$host"; then
+  echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
+  echo "$help" 1>&2
+  exit 1
+else
+  host_alias=$host
+  build_alias=$host_alias
+  build=$host
+fi
+
+if test x"$host" != x"$build"; then
+  ac_tool_prefix=${host_alias}-
+else
+  ac_tool_prefix=
+fi
+
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+case $host_os in
+linux-gnu*) ;;
+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+esac
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+  old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+fi
+
+# Source the script associated with the $tagname tag configuration.
+if test -n "$tagname"; then
+  . $ltmain
+else
+  # FIXME:  We should use a variable here
+  # Configure for a C compiler
+  . $srcdir/ltcf-c.sh
+fi
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$NM" && NM=nm
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$objext" && objext=o
+
+echo $ac_n "checking for objdir... $ac_c" 1>&6
+rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+echo "$ac_t$objdir" 1>&6
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# Allow CC to be a program name with arguments.
+set dummy $CC
+compiler="$2"
+
+# We assume here that the value for ac_cv_prog_cc_pic will not be cached
+# in isolation, and that seeing it set (from the cache) indicates that
+# the associated values are set (in the cache) correctly too.
+echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
+echo "$progname:678:checking for $compiler option to produce PIC" 1>&5
+
+if test -z "$ac_cv_prog_cc_pic"; then
+  echo "$ac_t"none 1>&6
+else
+  echo "$ac_t""$ac_cv_prog_cc_pic" 1>&6
+
+  # Check to make sure the pic_flag actually works.
+  echo $ac_n "checking if $compiler PIC flag $ac_cv_prog_cc_pic works... $ac_c" 1>&6
+  echo "$progname:687:checking that $compiler PIC flag $ac_cv_prog_cc_pic works." 1>&5
+  if test "X${ac_cv_prog_cc_pic_works+set}" = Xset && \
+     test "X${ac_cv_prog_cc_pic_works}" != X; then
+    echo $ac_n "(cached) $ac_c" 1>&6
+  else
+    ac_cv_prog_cc_pic_works=yes
+    $rm conftest*
+    echo $lt_simple_compile_test_code > conftest.$ac_ext
+    save_CFLAGS="$CFLAGS"
+    CFLAGS="$CFLAGS $ac_cv_prog_cc_pic -DPIC"
+    if { (eval echo $progname:697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
+      # Append any warnings to the config.log.
+      cat conftest.err 1>&5
+
+      case $host_os in
+      hpux9* | hpux10* | hpux11*)
+	# On HP-UX, both CC and GCC only warn that PIC is supported... then
+	# they create non-PIC objects.  So, if there were any warnings, we
+	# assume that PIC is not supported.
+	if test -s conftest.err; then
+	  ac_cv_prog_cc_pic_works=no
+	  ac_cv_prog_cc_can_build_shared=no
+	  ac_cv_prog_cc_pic=
+	else
+	  ac_cv_prog_cc_pic_works=yes
+	  ac_cv_prog_cc_pic=" $ac_cv_prog_cc_pic"
+	fi
+	;;
+      *)
+	ac_cv_prog_cc_pic_works=yes
+	ac_cv_prog_cc_pic=" $ac_cv_prog_cc_pic"
+	;;
+      esac
+    else
+      # Append any errors to the config.log.
+      cat conftest.err 1>&5
+      ac_cv_prog_cc_pic_works=no
+      ac_cv_prog_cc_can_build_shared=no
+      ac_cv_prog_cc_pic=
+    fi
+    CFLAGS="$save_CFLAGS"
+    $rm conftest*
+  fi
+  # Belt *and* braces to stop my trousers falling down:
+  if test "X$ac_cv_prog_cc_pic_works" = Xno; then
+    ac_cv_prog_cc_pic=
+    ac_cv_prog_cc_can_build_shared=no
+  fi
+  echo "$ac_t""$ac_cv_prog_cc_pic_works" 1>&6
+fi
+
+# Check for any special shared library compilation flags.
+if test -n "$ac_cv_prog_cc_shlib"; then
+  echo "$progname: warning: \`$CC' requires \`$ac_cv_prog_cc_shlib' to build shared libraries" 1>&2
+  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$ac_cv_prog_cc_shlib[ 	]" >/dev/null; then :
+  else
+    echo "$progname: add \`$ac_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2
+    ac_cv_prog_cc_can_build_shared=no
+  fi
+fi
+
+echo $ac_n "checking if $compiler static flag $ac_cv_prog_cc_static works... $ac_c" 1>&6
+echo "$progname:749: checking if $compiler static flag $ac_cv_prog_cc_static works" >&5
+if test "X${ac_cv_prog_cc_static_works+set}" = Xset && \
+   test "X${ac_cv_prog_cc_static_works}" != X; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  $rm conftest*
+  echo $lt_simple_link_test_code > conftest.$ac_ext
+  save_LDFLAGS="$LDFLAGS"
+  LDFLAGS="$LDFLAGS $ac_cv_prog_cc_static"
+  if { (eval echo $progname:758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+    ac_cv_prog_cc_static_works=yes
+  else
+    ac_cv_prog_cc_static_works=no
+    ac_cv_prog_cc_static=
+  fi
+  LDFLAGS="$save_LDFLAGS"
+  $rm conftest*
+fi
+# Belt *and* braces to stop my trousers falling down:
+if test "X$ac_cv_prog_cc_static_works" = Xno; then
+  ac_cv_prog_cc_static=
+fi
+echo "$ac_t""$ac_cv_prog_cc_static_works" 1>&6
+pic_flag="$ac_cv_prog_cc_pic"
+special_shlib_compile_flags="$ac_cv_prog_cc_shlib"
+wl="$ac_cv_prog_cc_wl"
+link_static_flag="$ac_cv_prog_cc_static"
+no_builtin_flag="$ac_cv_prog_cc_no_builtin"
+can_build_shared="$ac_cv_prog_cc_can_build_shared"
+
+# find the maximum length of command line arguments
+echo "$progname:780: finding the maximum length of command line arguments" 1>&5
+echo $ac_n "finding the maximum length of command line arguments... $ac_c" 1>&6
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  i=0
+  testring="ABCDEF"
+  while test `$CONFIG_SHELL $0 --fallback-echo "X$testring" >/dev/null 2>&1` == `echo "X$testring" >/dev/null 2>&1` &&
+          new_result=`expr "X$testring" : ".*" 2>&1` &&
+          lt_cv_sys_max_cmd_len=$new_result &&
+          test $i != 32 # 1 MB should be enough
+  do
+    i=`expr $i + 1`
+    testring=$testring$testring
+  done
+  testring=
+  # add a significant safety factor because C++ compilers can tack on massive amounts
+  # of additional arguments before passing them to the linker.  1/4 should be good.
+  len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+  lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len - $len`
+fi
+echo "$progname:@lineno@: result: $lt_cv_sys_max_cmd_len" 1>&5
+echo "${ac_t}$lt_cv_sys_max_cmd_len" 1>&6
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  max_cmd_len=$lt_cv_sys_max_cmd_len
+else
+  max_cmd_len=none
+fi
+
+# Check to see if options -o and -c are simultaneously supported by compiler
+echo $ac_n "checking if $compiler supports -c -o file.$objext... $ac_c" 1>&6
+if test "${lt_cv_compiler_c_o+set}" = set; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  $rm -r conftest 2>/dev/null
+  mkdir conftest
+  cd conftest
+  $rm conftest*
+  echo $lt_simple_compile_test_code > conftest.$ac_ext
+  mkdir out
+  # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+  # that will create temporary files in the current directory regardless of
+  # the output directory.  Thus, making CWD read-only will cause this test
+  # to fail, enabling locking or at least warning the user not to do parallel
+  # builds.
+  chmod -w .
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -o out/conftest2.$objext"
+  echo "$progname:829: checking if $compiler supports -c -o file.$objext" >&5
+  if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$objext; then
+
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+      if test -s out/conftest.err; then
+        lt_cv_compiler_c_o=no
+      else
+        lt_cv_compiler_c_o=yes
+      fi
+  else
+    # Append any errors to the config.log.
+    cat out/conftest.err 1>&5
+    lt_cv_compiler_c_o=no
+  fi
+  CFLAGS="$save_CFLAGS"
+  chmod u+w .
+  $rm conftest* out/*
+  rmdir out
+  cd ..
+  rmdir conftest
+  $rm -r conftest 2>/dev/null
+fi
+compiler_c_o=$lt_cv_compiler_c_o
+echo "${ac_t}$compiler_c_o" 1>&6
+
+# Check to see if we can do hard links to lock some files if needed
+hard_links="nottested"
+if test "$compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$ac_t$hard_links" 1>&6
+  $rm conftest*
+  if test "$hard_links" = no; then
+    echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+if test "$with_gcc" = yes; then
+  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
+  $rm conftest*
+  echo $lt_simple_compile_test_code > conftest.$ac_ext
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
+  echo "$progname:883: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+  if { (eval echo $progname:884: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
+
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+      if test -s conftest.err; then
+	echo "$ac_t"no 1>&6
+	compiler_rtti_exceptions=no
+      else
+	echo "$ac_t"yes 1>&6
+	compiler_rtti_exceptions=yes
+      fi
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    compiler_rtti_exceptions=no
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+
+  if test "$compiler_rtti_exceptions" = "yes"; then
+    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+  else
+    no_builtin_flag=' -fno-builtin'
+  fi
+  
+fi
+
+# See if the linker supports building shared libraries.
+echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
+
+echo "$ac_t$ld_shlibs" 1>&6
+test "$ld_shlibs" = no && can_build_shared=no
+
+# Check hardcoding attributes.
+echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var"; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$hardcode_shlibpath_var" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+echo "$ac_t$hardcode_action" 1>&6
+
+echo $ac_n "checking whether stripping libraries is possible... $ac_c" 1>&6
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  echo "${ac_t}yes" 1>&6
+else
+  echo "${ac_t}no" 1>&6
+fi
+
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+# PORTME Fill in your ld.so characteristics
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+
+echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}.so$major'
+  ;;
+
+aix4* | aix5*)
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    # We preserve .a as extension for shared libraries though AIX4.2
+    # and later linker supports .so
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so instead of
+      # lib<name>.a to let people know that these are not typical AIX shared libraries.
+      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+      # We want symlinks to be created for the different names.
+      version_type=linux
+    else
+      # We preserve .a as extension for shared libraries though AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}.so$major.o'
+    fi
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then
+      export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+    else
+      export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+    fi
+    shlibpath_var=LIBPATH
+    deplibs_check_method=pass_all
+    # Put the right runpath into libraries.
+    hardcode_into_libs=yes
+    case $host_os in
+    aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	# With GCC up to 2.95.x, collect2 would create an import file
+	# for dependence libraries.  The import file would start with
+	# the line `#! .'.  This would cause the generated library to
+	# depend on `.', always an invalid library.  This was fixed in
+	# development snapshots of GCC prior to 3.0.
+        can_build_shared=no
+      fi
+      ;;
+    esac
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}.so'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  lt_cv_dlopen="load_add_on"
+  lt_cv_dlopen_libs=
+  lt_cv_dlopen_self=yes
+  ;;
+
+bsdi4*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  export_dynamic_flag_spec=-rdynamic
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  need_version=no
+  need_lib_prefix=no
+  case $with_gcc,$host_os in
+  yes,cygwin*)
+    library_names_spec='$libname.dll.a'
+    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll'
+    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog .libs/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll; $rm \$dlpath'
+    ;;
+  yes,mingw*)
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
+    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
+    ;;
+  yes,pw32*)
+    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
+;;
+  *)
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  lt_cv_dlopen="LoadLibrary"
+  lt_cv_dlopen_libs=
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}.`test .$module = .yes && echo so || echo dylib` ${libname}${release}${major}.$`test .$module = .yes && echo so || echo dylib` ${libname}.`test .$module = .yes && echo so || echo dylib`'
+  soname_spec='${libname}${release}${major}.`test .$module = .yes && echo so || echo dylib`'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+freebsd*)
+  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  *)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  dynamic_linker="$host_os dld.sl"
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  shlibpath_var=SHLIB_PATH
+  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+  soname_spec='${libname}${release}.sl$major'
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+irix5* | irix6*)
+  version_type=irix
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
+  case $host_os in
+  irix5*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+    need_version=yes
+  else
+    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
+    soname_spec='${libname}${release}.so$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+    need_version=no
+  fi
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  # OpenBSD 2.7 the overriding is needed for fast-install
+  shlibpath_overrides_runpath=yes
+  ;;
+
+os2*)
+  libname_spec='$name'
+  need_lib_prefix=no
+  library_names_spec='$libname.dll $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_version=no
+  soname_spec='${libname}${release}.so'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+sco3.2v5*)
+  version_type=osf
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
+    soname_spec='$libname.so.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$ac_t$dynamic_linker" 1>&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+  ;;
+irix*)
+  symcode='[BCDEGRST]'
+  ;;
+solaris* | sysv5*)
+  symcode='[BDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $host_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+  symcode='[ABCDGISTW]'
+fi
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Write the raw and C identifiers.
+global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode\)[ 	][ 	]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+  $rm conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  echo "$progname:1423: checking if global_symbol_pipe works" >&5
+  if { (eval echo $progname:1424: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { echo "$progname:1427: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
+
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
+
+	  cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+	  sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.$ac_ext
+	  cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$objext conftstm.$objext
+	  save_LIBS="$LIBS"
+	  save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$objext"
+	  CFLAGS="$CFLAGS$no_builtin_flag"
+	  if { (eval echo $progname:1479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+	    pipe_works=yes
+	  else
+	    echo "$progname: failed program was:" >&5
+	    cat conftest.$ac_ext >&5
+	  fi
+	  LIBS="$save_LIBS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  $rm conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    global_symbol_pipe=
+  fi
+done
+if test "$pipe_works" = yes; then
+  echo "${ac_t}ok" 1>&6
+else
+  echo "${ac_t}failed" 1>&6
+fi
+
+if test -z "$global_symbol_pipe"; then
+  global_symbol_to_cdecl=
+fi
+
+# Report the final consequences.
+echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
+
+# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
+# configure.in, otherwise build static only libraries.
+case $host_os in
+cygwin* | mingw* | pw32* | os2*)
+  if test x$can_build_shared = xyes; then
+    test x$enable_win32_dll = xno && can_build_shared=no
+    echo "checking if package supports dlls... $can_build_shared" 1>&6
+  fi
+;;
+esac
+
+echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4* | aix5*)
+  test "$enable_shared" = yes && enable_static=no
+  ;;
+esac
+
+echo "$ac_t$enable_shared" 1>&6
+
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+
+echo "checking whether to build static libraries... $enable_static" 1>&6
+
+if test "$hardcode_action" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$with_gcc" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+# Check whether we must set pic_mode to default
+test -z "$pic_flag" && pic_mode=default
+
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+if test "X${lt_cv_dlopen+set}" != Xset; then
+  lt_cv_dlopen=no lt_cv_dlopen_libs=
+echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+echo "$progname:1583: checking for dlopen in -ldl" >&5
+if test "X${ac_cv_lib_dl_dlopen+set}" = Xset; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldl  $LIBS"
+cat > conftest.$ac_ext <<EOF
+/*#line 1590 "ltconfig"*/
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo $progname:1603: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_lib_dl_dlopen=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if test "X$ac_cv_lib_dl_dlopen" = Xyes; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dlopen""... $ac_c" 1>&6
+echo "$progname:1622: checking for dlopen" >&5
+if test "X${ac_cv_func_dlopen+set}" = Xset; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+/*#line 1627 "ltconfig"*/
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char dlopen(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+dlopen();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:1652: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_func_dlopen=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_func_dlopen=no
+fi
+rm -f conftest*
+fi
+if test "X$ac_cv_func_dlopen" = Xyes; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dlopen"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
+echo "$progname:1669: checking for dlopen in -lsvld" >&5
+if test "X${ac_cv_lib_svld_dlopen+set}" = Xset; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lsvld  $LIBS"
+cat > conftest.$ac_ext <<EOF
+/*#line 1676 "ltconfig"*/
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo $progname:1689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_lib_svld_dlopen=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if test "X$ac_cv_lib_svld_dlopen" = Xyes; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
+echo "$progname:1708: checking for dld_link in -ldld" >&5
+if test "X${ac_cv_lib_dld_dld_link+set}" = Xset; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldld  $LIBS"
+cat > conftest.$ac_ext <<EOF
+/*#line 1715 "ltconfig"*/
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link();
+
+int main() {
+dld_link()
+; return 0; }
+EOF
+if { (eval echo $progname:1728: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_lib_dld_dld_link=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if test "X$ac_cv_lib_dld_dld_link" = Xyes; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load""... $ac_c" 1>&6
+echo "$progname:1747: checking for shl_load" >&5
+if test "X${ac_cv_func_shl_load+set}" = Xset; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+/*#line 1752 "ltconfig"*/
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char shl_load(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+shl_load();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:1777: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_func_shl_load=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_func_shl_load=no
+fi
+rm -f conftest*
+fi
+
+if test "X$ac_cv_func_shl_load" = Xyes; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="shl_load"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+echo "$progname:1795: checking for shl_load in -ldld" >&5
+if test "X${ac_cv_lib_dld_shl_load+set}" = Xset; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldld  $LIBS"
+cat > conftest.$ac_ext <<EOF
+/*#line 1802 "ltconfig"*/
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load();
+
+int main() {
+shl_load()
+; return 0; }
+EOF
+if { (eval echo $progname:1816: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_lib_dld_shl_load=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if test "X$ac_cv_lib_dld_shl_load" = Xyes; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+fi
+
+fi
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+for ac_hdr in dlfcn.h; do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "$progname:1863: checking for $ac_hdr" >&5
+if eval "test \"`echo 'X$''{'ac_cv_header_$ac_safe'+set}'`\" = Xset"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+/*#line 1868 "ltconfig"*/
+#include <$ac_hdr>
+int fnord = 0;
+int main () { return(0); }
+EOF
+ac_try="$ac_compile >/dev/null 2>conftest.out"
+{ (eval echo $progname:1874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+    if test "x$ac_cv_header_dlfcn_h" = xyes; then
+      CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+    fi
+    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+  echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:1902: checking whether a program can dlopen itself" >&5
+if test "X${lt_cv_dlopen_self+set}" = Xset; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+    lt_cv_dlopen_self=cross
+  else
+    cat > conftest.$ac_ext <<EOF
+/*#line 1910 "ltconfig"*/
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL	RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+#  define LTDL_GLOBAL	DL_GLOBAL
+# else
+#  define LTDL_GLOBAL	0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+#  define LTDL_LAZY_OR_NOW	RTLD_LAZY
+# else
+#  ifdef DL_LAZY
+#   define LTDL_LAZY_OR_NOW	DL_LAZY
+#  else
+#   ifdef RTLD_NOW
+#    define LTDL_LAZY_OR_NOW	RTLD_NOW
+#   else
+#    ifdef DL_NOW
+#     define LTDL_LAZY_OR_NOW	DL_NOW
+#    else
+#     define LTDL_LAZY_OR_NOW	0
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+void fnord() { int i=42; }
+int main() {
+    void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+               if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); return 1;}
+
+EOF
+if { (eval echo $progname:1957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+  lt_cv_dlopen_self=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  lt_cv_dlopen_self=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self" 1>&6
+
+  if test "$lt_cv_dlopen_self" = yes; then
+    LDFLAGS="$LDFLAGS $link_static_flag"
+  echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:1976: checking whether a statically linked program can dlopen itself" >&5
+if test "X${lt_cv_dlopen_self_static+set}" = Xset; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+    lt_cv_dlopen_self_static=cross
+  else
+    cat > conftest.$ac_ext <<EOF
+/*#line 1984 "ltconfig"*/
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL	RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+#  define LTDL_GLOBAL	DL_GLOBAL
+# else
+#  define LTDL_GLOBAL	0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+#  define LTDL_LAZY_OR_NOW	RTLD_LAZY
+# else
+#  ifdef DL_LAZY
+#   define LTDL_LAZY_OR_NOW	DL_LAZY
+#  else
+#   ifdef RTLD_NOW
+#    define LTDL_LAZY_OR_NOW	RTLD_NOW
+#   else
+#    ifdef DL_NOW
+#     define LTDL_LAZY_OR_NOW	DL_NOW
+#    else
+#     define LTDL_LAZY_OR_NOW	0
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+void fnord() { int i=42; }
+int main() {
+    void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+    if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); return 1; }
+
+EOF
+if { (eval echo $progname:2031: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+  lt_cv_dlopen_self_static=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  lt_cv_dlopen_self_static=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
+fi
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+# Copy echo and quote the copy, instead of the original, because it is
+# used later.
+ltecho="$echo"
+if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   ltecho="$CONFIG_SHELL \$0 --fallback-echo"
+fi
+LTSHELL="$SHELL"
+
+LTCONFIG_VERSION="$VERSION"
+
+# Only quote variables if we're using ltmain.sh.
+case $ltmain in
+*.sh)
+  # Now quote all the things that may contain metacharacters.
+  for var in ltecho old_AR old_AR_FLAGS old_CC old_LTCC old_CFLAGS old_CPPFLAGS \
+    old_MAGIC_CMD old_LD old_LDFLAGS old_LIBS \
+    old_LN_S old_NM old_RANLIB old_STRIP \
+    old_AS old_DLLTOOL old_OBJDUMP \
+    old_OBJEXT old_EXEEXT old_reload_flag \
+    old_deplibs_check_method old_file_magic_cmd \
+    AR AR_FLAGS CC LTCC LD LN_S NM LTSHELL LTCONFIG_VERSION \
+    reload_flag reload_cmds wl \
+    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
+    library_names_spec soname_spec \
+    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
+    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
+    predep_objects postdep_objects predeps postdeps compiler_lib_search_path \
+    old_striplib striplib file_magic_cmd export_symbols_cmds \
+    deplibs_check_method allow_undefined_flag no_undefined_flag \
+    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+    hardcode_libdir_flag_spec hardcode_libdir_separator  \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    compiler_c_o need_locks exclude_expsyms include_expsyms; do
+
+    case $var in
+    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
+    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ### testsuite: skip nested quoting test
+      ;;
+    *)
+      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ### testsuite: skip nested quoting test
+      ;;
+    esac
+  done
+
+  case $ltecho in
+  *'\$0 --fallback-echo"')
+    ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+  if test -z "$tagname"; then
+    trap "$rm \"$ofile\"; exit 1" 1 2 15
+    echo "creating $ofile"
+    $rm "$ofile"
+    cat <<EOF > "$ofile"
+#! $SHELL
+
+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
+#
+# Copyright (C) 1996-2000 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="sed -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+# The names of the tagged configurations supported by this script.
+available_tags=
+
+### BEGIN LIBTOOL CONFIG
+EOF
+  else
+    echo "appending configuration tag \"$tagname\" to $ofile"
+    echo "### BEGIN LIBTOOL TAG CONFIG: $tagname" >> "$ofile"
+  fi
+  cfgfile="$ofile"
+  ;;
+
+*)
+  # Double-quote the variables that need it (for aesthetics).
+  for var in old_AR old_AR_FLAGS old_CC old_LTCC old_CFLAGS old_CPPFLAGS \
+    old_MAGIC_CMD old_LD old_LDFLAGS old_LIBS \
+    old_LN_S old_NM old_RANLIB old_STRIP \
+    old_AS old_DLLTOOL old_OBJDUMP \
+    old_OBJEXT old_EXEEXT old_reload_flag \
+    old_deplibs_check_method old_file_magic_cmd; do
+    eval "$var=\\\"\$var\\\""
+  done
+
+  # Just create a config file.
+  cfgfile="$ofile.cfg"
+  if test -z "$tagname"; then
+    trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+    echo "creating $cfgfile"
+    $rm "$cfgfile"
+    cat <<EOF > "$cfgfile"
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+
+### BEGIN LIBTOOL CONFIG
+EOF
+  else
+    echo "appending to $cfgfile"
+    echo "### BEGIN LIBTOOL TAG CONFIG: $tagname" >> "$ofile"
+  fi
+  ;;
+esac
+
+cat <<EOF >> "$cfgfile"
+# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# AR=$old_AR AR_FLAGS=$old_AR_FLAGS LTCC=$old_LTCC CC=$old_CC \\
+# CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
+# MAGIC_CMD=$old_MAGIC_CMD LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
+# LN_S=$old_LN_S NM=$old_NM RANLIB=$old_RANLIB STRIP=$old_STRIP \\
+# AS=$old_AS DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP \\
+# objext=$old_OBJEXT exeext=$old_EXEEXT reload_flag=$old_reload_flag \\
+# deplibs_check_method=$old_deplibs_check_method \\
+# file_magic_cmd=$old_file_magic_cmd \\
+#   $0$ltconfig_args
+#
+# Compiler and other test output produced by $progname, useful for
+# debugging $progname, is in ./config.log if it exists.
+
+# The version of $progname that generated this script.
+LTCONFIG_VERSION=$LTCONFIG_VERSION
+
+# Shell to use when invoking shell scripts.
+SHELL=$LTSHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$need_lc
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$ltecho
+
+# The archiver.
+AR=$AR
+AR_FLAGS=$AR_FLAGS
+
+# A C compiler.
+LTCC=$LTCC
+
+# A language-specific compiler.
+CC=$CC
+
+# Is the compiler the GNU C compiler?
+with_gcc=$with_gcc
+
+# The linker used to build libraries.
+LD=$LD
+
+# Whether we need hard or soft links.
+LN_S=$LN_S
+
+# A BSD-compatible nm program.
+NM=$NM
+
+# A symbol stripping program
+STRIP=$STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$reload_flag
+reload_cmds=$reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$wl
+
+# Object file suffix (normally "o").
+objext="$objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$pic_flag
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$compiler_c_o
+
+# Must we lock files when doing compilation ?
+need_locks=$need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$link_static_flag
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$RANLIB
+old_archive_cmds=$old_archive_cmds
+old_postinstall_cmds=$old_postinstall_cmds
+old_postuninstall_cmds=$old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$old_archive_from_expsyms_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$archive_cmds
+archive_expsym_cmds=$archive_expsym_cmds
+postinstall_cmds=$postinstall_cmds
+postuninstall_cmds=$postuninstall_cmds
+
+# Commands to strip libraries.
+old_striplib=$old_striplib
+striplib=$striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$predep_objects
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$postdep_objects
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$predeps
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$compiler_lib_search_path
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$global_symbol_to_cdecl
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$export_symbols_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$include_expsyms
+
+EOF
+
+if test -z "$tagname"; then
+  echo '### END LIBTOOL CONFIG' >> "$ofile"
+else
+  echo "### END LIBTOOL TAG CONFIG: $tagname" >> "$ofile"
+fi
+
+case $ltmain in
+*.sh)
+  echo >> "$ofile"
+  if test -z "$tagname"; then
+    case $host_os in
+    aix3*)
+      cat <<\EOF >> "$ofile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+      ;;
+    esac
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+      cat <<'EOF' >> "$ofile"
+      # This is a source program that is used to create dlls on Windows
+      # Don't remove nor modify the starting and closing comments
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+      # This is a source program that is used to create import libraries
+      # on Windows for dlls which lack them. Don't remove nor modify the
+      # starting and closing comments
+# /* impgen.c starts here */
+# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
+#
+#  This file is part of GNU libtool.
+#
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#  */
+#
+#  #include <stdio.h>		/* for printf() */
+#  #include <unistd.h>		/* for open(), lseek(), read() */
+#  #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
+#  #include <string.h>		/* for strdup() */
+#
+#  /* O_BINARY isn't required (or even defined sometimes) under Unix */
+#  #ifndef O_BINARY
+#  #define O_BINARY 0
+#  #endif
+#
+#  static unsigned int
+#  pe_get16 (fd, offset)
+#       int fd;
+#       int offset;
+#  {
+#    unsigned char b[2];
+#    lseek (fd, offset, SEEK_SET);
+#    read (fd, b, 2);
+#    return b[0] + (b[1]<<8);
+#  }
+#
+#  static unsigned int
+#  pe_get32 (fd, offset)
+#      int fd;
+#      int offset;
+#  {
+#    unsigned char b[4];
+#    lseek (fd, offset, SEEK_SET);
+#    read (fd, b, 4);
+#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+#  }
+#
+#  static unsigned int
+#  pe_as32 (ptr)
+#       void *ptr;
+#  {
+#    unsigned char *b = ptr;
+#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+#  }
+#
+#  int
+#  main (argc, argv)
+#      int argc;
+#      char *argv[];
+#  {
+#      int dll;
+#      unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
+#      unsigned long export_rva, export_size, nsections, secptr, expptr;
+#      unsigned long name_rvas, nexp;
+#      unsigned char *expdata, *erva;
+#      char *filename, *dll_name;
+#
+#      filename = argv[1];
+#
+#      dll = open(filename, O_RDONLY|O_BINARY);
+#      if (dll < 1)
+#  	return 1;
+#
+#      dll_name = filename;
+#
+#      for (i=0; filename[i]; i++)
+#  	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
+#  	    dll_name = filename + i +1;
+#
+#      pe_header_offset = pe_get32 (dll, 0x3c);
+#      opthdr_ofs = pe_header_offset + 4 + 20;
+#      num_entries = pe_get32 (dll, opthdr_ofs + 92);
+#
+#      if (num_entries < 1) /* no exports */
+#  	return 1;
+#
+#      export_rva = pe_get32 (dll, opthdr_ofs + 96);
+#      export_size = pe_get32 (dll, opthdr_ofs + 100);
+#      nsections = pe_get16 (dll, pe_header_offset + 4 +2);
+#      secptr = (pe_header_offset + 4 + 20 +
+#  	      pe_get16 (dll, pe_header_offset + 4 + 16));
+#
+#      expptr = 0;
+#      for (i = 0; i < nsections; i++)
+#      {
+#  	char sname[8];
+#  	unsigned long secptr1 = secptr + 40 * i;
+#  	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
+#  	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
+#  	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
+#  	lseek(dll, secptr1, SEEK_SET);
+#  	read(dll, sname, 8);
+#  	if (vaddr <= export_rva && vaddr+vsize > export_rva)
+#  	{
+#  	    expptr = fptr + (export_rva - vaddr);
+#  	    if (export_rva + export_size > vaddr + vsize)
+#  		export_size = vsize - (export_rva - vaddr);
+#  	    break;
+#  	}
+#      }
+#
+#      expdata = (unsigned char*)malloc(export_size);
+#      lseek (dll, expptr, SEEK_SET);
+#      read (dll, expdata, export_size);
+#      erva = expdata - export_rva;
+#
+#      nexp = pe_as32 (expdata+24);
+#      name_rvas = pe_as32 (expdata+32);
+#
+#      printf ("EXPORTS\n");
+#      for (i = 0; i<nexp; i++)
+#      {
+#  	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
+#  	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
+#      }
+#
+#      return 0;
+#  }
+# /* impgen.c ends here */
+
+EOF
+    ;;
+  esac
+
+
+    # Append the ltmain.sh script.
+    sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
+    # We use sed instead of cat because bash on DJGPP gets confused if
+    # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+    # text mode, it properly converts lines to CR/LF.  This bash problem
+    # is reportedly fixed, but why not run on old versions too?
+
+    chmod +x "$ofile"
+  fi
+  ;;
+
+*)
+  # Compile the libtool program.
+  echo "FIXME: would compile $ltmain"
+  ;;
+esac
+
+# Update the list of available tags.
+if test -n "$tagname"; then
+
+  # Extract list of available tagged configurations in $ofile.
+  # Note that this assumes the entire list is on one line.
+  available_tags=`grep "^available_tags=" $ofile | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+  # Append the new tag name to the list of available tags.
+  available_tags="$available_tags $tagname"
+
+  # Now substitute the updated of available tags.
+  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' ${ofile} > ${ofile}.new"; then
+    mv ${ofile}.new ${ofile}
+    chmod +x "$ofile"
+  else
+    rm -f ${ofile}.new
+    echo "$progname: unable to update list of available tagged configurations."
+    exit 1
+  fi
+fi
+
+# Don't cache tagged configuration!
+test -n "$cache_file" && test -z "$tagname" || exit 0
+
+# AC_CACHE_SAVE
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/krozat/admin/ltmain.sh b/krozat/admin/ltmain.sh
new file mode 100644
index 0000000..1f5c51a
--- /dev/null
+++ b/krozat/admin/ltmain.sh
@@ -0,0 +1,5395 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun ltconfig.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell, and then maybe $echo will work.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# The name of this program.
+progname=`$echo "$0" | sed 's%^.*/%%'`
+modename="$progname"
+
+# Constants.
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.4a
+TIMESTAMP=" (1.641.2.206mm 2001/04/03 21:47:47)"
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+SP2NL='tr \040 \012'
+NL2SP='tr \015\012 \040\040'
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+  save_LANG="$LANG"; LANG=C; export LANG
+fi
+
+if test "$LTCONFIG_VERSION" != "$VERSION"; then
+  echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  echo "$modename: not configured to build any kind of library" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+
+# Parse our command line options once, thoroughly.
+while test $# -gt 0
+do
+  arg="$1"
+  shift
+
+  case $arg in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case $prev in
+    execute_dlfiles)
+      execute_dlfiles="$execute_dlfiles $arg"
+      ;;
+    tag)
+      tagname="$arg"
+
+      # Check whether tagname contains only valid characters
+      case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+	echo "$progname: invalid tag name: $tagname" 1>&2
+	exit 1
+        ;;
+      esac
+
+      if grep "^### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
+        taglist="$taglist $tagname"
+	# Evaluate the configuration.
+	eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
+      else
+	echo "$progname: ignoring unknown tag $tagname" 1>&2
+      fi
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case $arg in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+    exit 0
+    ;;
+
+  --config)
+    sed -n -e '/^### BEGIN LIBTOOL CONFIG/,/^### END LIBTOOL CONFIG/p' < "$0"
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      sed -n -e "/^### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
+    done
+    exit 0
+    ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+    exit 0
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --quiet | --silent)
+    show=:
+    ;;
+
+  --tag) prevopt="--tag" prev=tag ;;
+  --tag=*)
+    set tag "$optarg" ${1+"$@"}
+    shift
+    prev=tag
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+fi
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    case $nonopt in
+    *cc | *++ | gcc* | *-gcc*)
+      mode=link
+      for arg
+      do
+	case $arg in
+	-c)
+	   mode=compile
+	   break
+	   ;;
+	esac
+      done
+      ;;
+    *db | *dbx | *strace | *truss)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+	if test -n "$nonopt"; then
+	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+	else
+	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+	fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case $mode in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    prev=
+    lastarg=
+    srcfile="$nonopt"
+    suppress_output=
+
+    user_target=no
+    for arg
+    do
+      case $prev in
+      "") ;;
+      xcompiler)
+	# Aesthetically quote the previous argument.
+	prev=
+	lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+
+	case $arg in
+	# Double-quote args containing other shell metacharacters.
+	# Many Bourne shells cannot handle close brackets correctly
+	# in scan sets, so we specify it separately.
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+
+	# Add the previous argument to base_compile.
+	if test -z "$base_compile"; then
+	  base_compile="$lastarg"
+	else
+	  base_compile="$base_compile $lastarg"
+	fi
+	continue
+	;;
+      esac
+
+      # Accept any command-line options.
+      case $arg in
+      -o)
+	if test "$user_target" != "no"; then
+	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+	  exit 1
+	fi
+	user_target=next
+	;;
+
+      -static)
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Wc,*)
+	args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+	lastarg=
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=','
+	for arg in $args; do
+	  IFS="$save_ifs"
+
+	  # Double-quote args containing other shell metacharacters.
+	  # Many Bourne shells cannot handle close brackets correctly
+	  # in scan sets, so we specify it separately.
+	  case $arg in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    arg="\"$arg\""
+	    ;;
+	  esac
+	  lastarg="$lastarg $arg"
+	done
+	IFS="$save_ifs"
+	lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+
+	# Add the arguments to base_compile.
+	if test -z "$base_compile"; then
+	  base_compile="$lastarg"
+	else
+	  base_compile="$base_compile $lastarg"
+	fi
+	continue
+	;;
+      esac
+
+      case $user_target in
+      next)
+	# The next one is the -o target name
+	user_target=yes
+	continue
+	;;
+      yes)
+	# We got the output file
+	user_target=set
+	libobj="$arg"
+	continue
+	;;
+      esac
+
+      # Accept the current argument as the source file.
+      lastarg="$srcfile"
+      srcfile="$arg"
+
+      # Aesthetically quote the previous argument.
+
+      # Backslashify any backslashes, double quotes, and dollar signs.
+      # These are the only characters that are still specially
+      # interpreted inside of double-quoted scrings.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      case $lastarg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	lastarg="\"$lastarg\""
+	;;
+      esac
+
+      # Add the previous argument to base_compile.
+      if test -z "$base_compile"; then
+	base_compile="$lastarg"
+      else
+	base_compile="$base_compile $lastarg"
+      fi
+    done
+
+    case $user_target in
+    set)
+      ;;
+    no)
+      # Get the name of the library object.
+      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      ;;
+    *)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    xform='[cCFSfmso]'
+    case $libobj in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.class) xform=class ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.f90) xform=f90 ;;
+    *.for) xform=for ;;
+    *.java) xform=java ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case $libobj in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    # Infer tagged configuration to use if any are available and
+    # if one wasn't chosen via the "--tag" command line option.
+    # Only attempt this if the compiler in the base compile
+    # command doesn't match the default compiler.
+    if test -n "$available_tags" && test -z "$tagname"; then
+      case $base_compile in
+      "$CC "*) ;;
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when ltconfig was run.
+      "`$echo $CC` "*) ;;
+      *)
+        for z in $available_tags; do
+          if grep "^### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+            case $base_compile in
+	    "$CC "*)
+              # The compiler in the base compile command matches
+              # the one in the tagged configuration.
+              # Assume this is the tagged configuration we want.
+              tagname=$z
+              break
+              ;;
+	    "`$echo $CC` "*)
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+          fi
+        done
+        # If $tagname still isn't set, then no tagged configuration
+        # was found and let the user know that the "--tag" command
+        # line option must be used.
+        if test -z "$tagname"; then
+          echo "$modename: unable to infer tagged configuration"
+          echo "$modename: specify a tag with \`--tag'" 1>&2
+	  exit 1
+#        else
+#          echo "$modename: using $tagname tagged configuration"
+        fi
+	;;
+      esac
+    fi
+
+    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$xdir" = "X$obj"; then
+      xdir=
+    else
+      xdir=$xdir/
+    fi
+    lobj=${xdir}$objdir/$objname
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    $run $rm $removelist
+    trap "$run $rm $removelist; exit 1" 1 2 15
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2*)
+      pic_mode=default
+      ;;
+    esac
+    if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+      removelist="$removelist $output_obj $lockfile"
+      trap "$run $rm $removelist; exit 1" 1 2 15
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $run ln "$0" "$lockfile" 2>/dev/null; do
+	$show "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+      echo $srcfile > "$lockfile"
+    fi
+
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
+
+    $run $rm "$libobj" "${libobj}T"
+
+    # Create a libtool object file (analogous to a ".la" file),
+    # but don't create it if we're doing a dry run.
+    test -z "$run" && cat > ${libobj}T <<EOF
+# $libobj - a libtool object file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+EOF
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+	command="$base_compile $srcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $srcfile"
+      fi
+
+      if test ! -d ${xdir}$objdir; then
+	$show "$mkdir ${xdir}$objdir"
+	$run $mkdir ${xdir}$objdir
+	status=$?
+	if test $status -ne 0 && test ! -d ${xdir}$objdir; then
+	  exit $status
+        fi
+      fi 
+
+      if test -z "$output_obj"; then
+        # Place PIC objects in $objdir
+        command="$command -o $lobj"
+      fi
+
+      $run $rm "$lobj" "$output_obj"
+
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	test -n "$output_obj" && $run $rm $removelist
+	exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+	echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "x$output_obj" != "x$lobj"; then
+	$show "$mv $output_obj $lobj"
+	if $run $mv $output_obj $lobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Append the name of the PIC object to the libtool object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object='$objdir/$objname'
+
+EOF
+
+      # Allow error messages only from the first compilation.
+      suppress_output=' >/dev/null 2>&1'
+    else
+      # No PIC object so indicate it doesn't exist in the libtool
+      # object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object=none
+
+EOF
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $srcfile"
+      else
+	command="$base_compile $srcfile $pic_flag"
+      fi
+      if test "$compiler_c_o" = yes; then
+	command="$command -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      command="$command$suppress_output"
+      $run $rm "$obj" "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	$run $rm $removelist
+	exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+	echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "x$output_obj" != "x$obj"; then
+	$show "$mv $output_obj $obj"
+	if $run $mv $output_obj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object='$objname'
+
+EOF
+    else
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object=none
+
+EOF
+    fi
+
+    $run $mv "${libobj}T" "${libobj}"
+
+    # Unlock the critical section if it was locked
+    if test "$need_locks" != no; then
+      $run $rm "$lockfile"
+    fi
+
+    exit 0
+    ;;
+
+  # libtool link mode
+  link | relink)
+    modename="$modename: link"
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invokation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args="$nonopt"
+    base_compile="$nonopt"
+    compile_command="$nonopt"
+    finalize_command="$nonopt"
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+
+    avoid_version=no
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    non_pic_objects=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -all-static | -static)
+	if test "X$arg" = "X-all-static"; then
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	else
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	fi
+	build_libtool_libs=no
+	build_old_libs=yes
+	prefer_static_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test $# -gt 0; do
+      arg="$1"
+      base_compile="$base_compile $arg"
+      shift
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+	;;
+      *) qarg=$arg ;;
+      esac
+      libtool_args="$libtool_args $qarg"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  compile_command="$compile_command @OUTPUT@"
+	  finalize_command="$finalize_command @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    compile_command="$compile_command @SYMFILE@"
+	    finalize_command="$finalize_command @SYMFILE@"
+	    preload=yes
+	  fi
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      dlfiles="$dlfiles $arg"
+	    else
+	      dlprefiles="$dlprefiles $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  if test ! -f "$arg"; then
+	    $echo "$modename: symbol file \`$arg' does not exist"
+	    exit 1
+	  fi
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+            save_arg=$arg
+	    moreargs=
+	    for fil in `cat $save_arg`
+	    do
+#	      moreargs="$moreargs $fil"
+              arg=$fil
+              # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+                pic_object=
+                non_pic_object=
+
+                # Read the .lo file
+                # If there is no directory component, then add one.
+                case $arg in
+                */* | *\\*) . $arg ;;
+                *) . ./$arg ;;
+                esac
+
+                if test -z "$pic_object" || \
+                   test -z "$non_pic_object" ||
+                   test "$pic_object" = none && \
+                   test "$non_pic_object" = none; then
+                  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+                  exit 1
+                fi
+
+	        # Extract subdirectory from the argument.
+	        xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	        if test "X$xdir" = "X$arg"; then
+	          xdir=
+	        else
+	          xdir="$xdir/"
+	        fi
+
+                if test "$pic_object" != none; then
+                  # Prepend the subdirectory the object is found in.
+	          pic_object="$xdir$pic_object"
+
+	          if test "$prev" = dlfiles; then
+	            if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+	              dlfiles="$dlfiles $pic_object"
+	              prev=
+	              continue
+	            else
+	              # If libtool objects are unsupported, then we need to preload.
+	              prev=dlprefiles
+	            fi
+	          fi
+
+	          # CHECK ME:  I think I busted this.  -Ossama
+                  if test "$prev" = dlprefiles; then
+	            # Preload the old-style object.
+	            dlprefiles="$dlprefiles $pic_object"
+	            prev=
+                  fi
+
+                  # A PIC object.
+	          libobjs="$libobjs $pic_object"
+	          arg="$pic_object"
+                fi
+
+                # Non-PIC object.
+                if test "$non_pic_object" != none; then
+                  # Prepend the subdirectory the object is found in.
+	          non_pic_object="$xdir$non_pic_object"
+
+                  # A standard non-PIC object
+                  non_pic_objects="$non_pic_objects $non_pic_object"
+                  if test -z "$pic_object" || test "$pic_object" = none ; then
+                    arg="$non_pic_object"
+                  fi
+                fi
+              else
+                # Only an error if not doing a dry-run.
+                if test -z "$run"; then
+                  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+                  exit 1
+                else
+                  # Dry-run case.
+
+	          # Extract subdirectory from the argument.
+	          xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	          if test "X$xdir" = "X$arg"; then
+	            xdir=
+	          else
+	            xdir="$xdir/"
+	          fi
+
+                  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+                  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+	          libobjs="$libobjs $pic_object"
+                  non_pic_objects="$non_pic_objects $non_pic_object"
+                fi
+	      fi
+	    done
+	  else
+	    $echo "$modename: link input file \`$save_arg' does not exist"
+	    exit 1
+	  fi
+          arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+	    exit 1
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) rpath="$rpath $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) xrpath="$xrpath $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	xcompiler)
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  compile_command="$compile_command $qarg"
+	  finalize_command="$finalize_command $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $wl$qarg"
+	  prev=
+	  compile_command="$compile_command $wl$qarg"
+	  finalize_command="$finalize_command $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+	continue
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  $echo "$modename: not more than one -exported-symbols argument allowed"
+	  exit 1
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix*)
+	  compile_command="$compile_command $arg"
+	  finalize_command="$finalize_command $arg"
+	  ;;
+	esac
+	continue
+	;;
+       
+      -L*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  if test -z "$absdir"; then
+	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+	    exit 1
+	  fi
+	  dir="$absdir"
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "*) ;;
+	*)
+	  deplibs="$deplibs -L$dir"
+	  lib_search_path="$lib_search_path $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$dir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test "$arg" = "-lc"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	    # These systems don't actually have c library (as such)
+	    continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    deplibs="$deplibs -framework System"
+	    continue
+	    ;;
+	  esac
+	elif test "$arg" = "-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-pw32* | *-*-beos*)
+	    # These systems don't actually have math library (as such)
+	    continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody math library is in the System framework
+	    deplibs="$deplibs -framework System"
+	    continue
+	    ;;
+	  esac
+	fi
+	deplibs="$deplibs $arg"
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # in order for the loader to find any dlls it needs.
+	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+	  fast_install=no
+	  ;;
+	*)
+	  no_install=yes
+	  ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+	  exit 1
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) xrpath="$xrpath $dir" ;;
+	esac
+	continue
+	;;
+
+      -static)
+        # The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -Wc,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+	arg=
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Wl,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+	arg=
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $wl$flag"
+	  linker_flags="$linker_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+
+      *.$objext)
+	# A standard object.
+	objs="$objs $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+          pic_object=
+          non_pic_object=
+
+          # Read the .lo file
+          # If there is no directory component, then add one.
+          case $arg in
+          */* | *\\*) . $arg ;;
+          *) . ./$arg ;;
+          esac
+
+          if test -z "$pic_object" || \
+             test -z "$non_pic_object" ||
+             test "$pic_object" = none && \
+             test "$non_pic_object" = none; then
+            $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+            exit 1
+          fi
+
+	  # Extract subdirectory from the argument.
+	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	  if test "X$xdir" = "X$arg"; then
+	    xdir=
+	  else
+	    xdir="$xdir/"
+	  fi
+
+          if test "$pic_object" != none; then
+            # Prepend the subdirectory the object is found in.
+	    pic_object="$xdir$pic_object"
+
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+	        dlfiles="$dlfiles $pic_object"
+	        prev=
+	        continue
+	      else
+	        # If libtool objects are unsupported, then we need to preload.
+	        prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+            if test "$prev" = dlprefiles; then
+	      # Preload the old-style object.
+	      dlprefiles="$dlprefiles $pic_object"
+	      prev=
+            fi
+
+            # A PIC object.
+	    libobjs="$libobjs $pic_object"
+	    arg="$pic_object"
+          fi
+
+          # Non-PIC object.
+          if test "$non_pic_object" != none; then
+            # Prepend the subdirectory the object is found in.
+	    non_pic_object="$xdir$non_pic_object"
+
+            # A standard non-PIC object
+            non_pic_objects="$non_pic_objects $non_pic_object"
+            if test -z "$pic_object" || test "$pic_object" = none ; then
+              arg="$non_pic_object"
+            fi
+          fi
+        else
+          # Only an error if not doing a dry-run.
+          if test -z "$run"; then
+            $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+            exit 1
+          else
+            # Dry-run case.
+
+	    # Extract subdirectory from the argument.
+	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	    if test "X$xdir" = "X$arg"; then
+	      xdir=
+	    else
+	      xdir="$xdir/"
+	    fi
+
+            pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+            non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+	    libobjs="$libobjs $pic_object"
+            non_pic_objects="$non_pic_objects $non_pic_object"
+          fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	deplibs="$deplibs $arg"
+	old_deplibs="$old_deplibs $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  dlfiles="$dlfiles $arg"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  dlprefiles="$dlprefiles $arg"
+	  prev=
+	else
+	  deplibs="$deplibs $arg"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+      esac
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+      fi
+    done
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Infer tagged configuration to use if any are available and
+    # if one wasn't chosen via the "--tag" command line option.
+    # Only attempt this if the compiler in the base link
+    # command doesn't match the default compiler.
+    if test -n "$available_tags" && test -z "$tagname"; then
+      case $base_compile in
+      "$CC "*) ;;
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when ltconfig was run.
+      "`$echo $CC` "*) ;;
+      *)
+        for z in $available_tags; do
+          if grep "^### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+            case $base_compile in
+	    "$CC "*)
+              # The compiler in $compile_command matches
+              # the one in the tagged configuration.
+              # Assume this is the tagged configuration we want.
+              tagname=$z
+              break
+	      ;;
+	    "`$echo $CC` "*)
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+          fi
+        done
+        # If $tagname still isn't set, then no tagged configuration
+        # was found and let the user know that the "--tag" command
+        # line option must be used.
+        if test -z "$tagname"; then
+          echo "$modename: unable to infer tagged configuration"
+          echo "$modename: specify a tag with \`--tag'" 1>&2
+	  exit 1
+#       else
+#         echo "$modename: using $tagname tagged configuration"
+        fi
+	;;
+      esac
+    fi
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$output_objdir" = "X$output"; then
+      output_objdir="$objdir"
+    else
+      output_objdir="$output_objdir/$objdir"
+    fi
+    # Create the object directory.
+    if test ! -d $output_objdir; then
+      $show "$mkdir $output_objdir"
+      $run $mkdir $output_objdir
+      status=$?
+      if test $status -ne 0 && test ! -d $output_objdir; then
+	exit $status
+      fi
+    fi
+
+    # Determine the type of output
+    case $output in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      case "$libs " in
+      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+      esac
+      libs="$libs $deplib"
+    done
+
+    if test $linkmode = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    uninst_deplibs= # uninstalled libtool libraries
+    uninst_path= # paths that contain uninstalled libtool libraries
+    case $linkmode in
+    lib)
+	passes="conv link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+	    exit 1
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)	passes="conv"
+	;;
+    esac
+    for pass in $passes; do
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
+	deplibs=
+      fi
+      if test $linkmode = prog; then
+	case $pass in
+	dlopen) libs="$dlfiles" ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      if test $pass = dlopen; then
+	# Collect dlpreopened libraries
+	save_deplibs="$deplibs"
+	deplibs=
+      fi
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-l*)
+	  if test $linkmode != lib && test $linkmode != prog; then
+	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+	    continue
+	  fi
+	  if test $pass = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+	    # Search the libtool library
+	    lib="$searchdir/lib${name}.la"
+	    if test -f "$lib"; then
+	      found=yes
+	      break
+	    fi
+	  done
+	  if test "$found" != yes; then
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  fi
+	  ;;
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test $pass = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    ;;
+	  prog)
+	    if test $pass = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test $pass = scan; then
+	      deplibs="$deplib $deplibs"
+	      newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    ;;
+	  *)
+	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+	    ;;
+	  esac
+	  continue
+	  ;;
+	-R*)
+	  if test $pass = link; then
+	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) xrpath="$xrpath $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la) lib="$deplib" ;;
+	*.$libext)
+	  if test $pass = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    if test "$deplibs_check_method" != pass_all; then
+	      echo
+	      echo "*** Warning: This library needs some functionality provided by $deplib."
+	      echo "*** I have the capability to make that library automatically link in when"
+	      echo "*** you link to this library.  But I can only do this if you have a"
+	      echo "*** shared version of the library, which you do not appear to have."
+	    else
+	      echo
+	      echo "*** Warning: Linking the shared library $output against the"
+	      echo "*** static library $deplib is not portable!"
+	      deplibs="$deplib $deplibs"
+	    fi
+	    continue
+	    ;;
+	  prog)
+	    if test $pass != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac
+	  ;;
+	*.lo | *.$objext)
+	  if test $pass = conv; then
+	    deplibs="$deplib $deplibs"
+	  elif test $linkmode = prog; then
+	    if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      newdlprefiles="$newdlprefiles $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      newdlfiles="$newdlfiles $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac
+	if test $found = yes || test -f "$lib"; then :
+	else
+	  $echo "$modename: cannot find the library \`$lib'" 1>&2
+	  exit 1
+	fi
+
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  exit 1
+	fi
+
+	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$ladir" = "X$lib" && ladir="."
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variable installed.
+	installed=yes
+
+	# Read the .la file
+	case $lib in
+	*/* | *\\*) . $lib ;;
+	*) . ./$lib ;;
+	esac
+
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test $linkmode != prog && test $linkmode != lib; }; then
+	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+	fi
+
+	if test $pass = conv; then
+	  # only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	      exit 1
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    convenience="$convenience $ladir/$objdir/$old_library"
+	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	      tmp_libs="$tmp_libs $deplib"
+	    done
+	  elif test $linkmode != prog && test $linkmode != lib; then
+	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
+	    exit 1
+	  fi
+	  continue
+	fi
+
+	# Get the name of the library we link against.
+	linklib=
+	for l in $old_library $library_names; do
+	  linklib="$l"
+	done
+	if test -z "$linklib"; then
+	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	  exit 1
+	fi
+
+	# This library was specified with -dlopen.
+	if test $pass = dlopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+	    exit 1
+	  fi
+	  if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    dlprefiles="$dlprefiles $lib $dependency_libs"
+	  else
+	    newdlfiles="$newdlfiles $lib"
+	  fi
+	  continue
+	fi
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$libdir"
+	    absdir="$libdir"
+	  fi
+	else
+	  dir="$ladir/$objdir"
+	  absdir="$abs_ladir/$objdir"
+	  # Remove this search path later
+	  uninst_path="$uninst_path $abs_ladir"
+	fi
+	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+	# This library was specified with -dlpreopen.
+	if test $pass = dlpreopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+	    exit 1
+	  fi
+	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+	  # are required to link).
+	  if test -n "$old_library"; then
+	    newdlprefiles="$newdlprefiles $dir/$old_library"
+	  # Otherwise, use the dlname, so that lt_dlopen finds it.
+	  elif test -n "$dlname"; then
+	    newdlprefiles="$newdlprefiles $dir/$dlname"
+	  else
+	    newdlprefiles="$newdlprefiles $dir/$linklib"
+	  fi
+	fi
+
+	if test -z "$libdir"; then
+	  # link the convenience library
+	  if test $linkmode = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+	if test $linkmode = prog && test $pass != link; then
+	  newlib_search_path="$newlib_search_path $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+	    esac
+	    # Need to link against all dependency_libs?
+	    if test $linkalldeplibs = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    case "$tmp_libs " in
+	    *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	    esac
+	    tmp_libs="$tmp_libs $deplib"
+	  done
+	  continue
+	fi
+
+	if test "$linkmode,$pass" = "prog,link"; then
+	  if test -n "$library_names" &&
+	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var"; then
+	      # Make sure the rpath contains only unique directories.
+	      case "$temp_rpath " in
+	      *" $dir "*) ;;
+	      *" $absdir "*) ;;
+	      *) temp_rpath="$temp_rpath $dir" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	if test -n "$library_names" &&
+	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	  if test "$installed" = no; then
+	    uninst_deplibs="$uninst_deplibs $lib"
+	    need_relink=yes
+	  fi
+	  # This is a shared library
+	  if test $linkmode = lib && test "$hardcode_into_libs" = all; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    realname="$2"
+	    shift; shift
+	    libname=`eval \\$echo \"$libname_spec\"`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin*)
+		major=`expr $current - $age`
+		versuffix="-$major"
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    soname=`echo $soroot | sed -e 's/^.*\///'`
+	    newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      $show "extracting exported symbol list from \`$soname'"
+	      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	      eval cmds=\"$extract_expsyms_cmds\"
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      $show "generating import library for \`$soname'"
+	      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	      eval cmds=\"$old_archive_from_expsyms_cmds\"
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi
+
+	  if test $linkmode = prog || test "$mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      $echo "$modename: configuration error: unsupported hardcode properties"
+	      exit 1
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test $linkmode = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes && \
+		 test "$hardcode_minus_L" != yes && \
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test $linkmode = prog || test "$mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test "$hardcode_direct" = yes; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+	      esac
+	      add="-l$name"
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    fi
+
+	    if test $linkmode = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test $linkmode = prog; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    echo "*** Warning: This library needs some functionality provided by $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	  else
+	    convenience="$convenience $dir/$old_library"
+	    old_convenience="$old_convenience $dir/$old_library"
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi
+
+	if test $linkmode = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
+	       test $link_static = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) xrpath="$xrpath $temp_xrpath";;
+		   esac;;
+	      *) temp_deplibs="$temp_deplibs $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
+
+	  newlib_search_path="$newlib_search_path $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    case "$tmp_libs " in
+	    *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	    esac
+	    tmp_libs="$tmp_libs $deplib"
+	  done
+
+	  if test $link_all_deplibs != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+		test "X$dir" = "X$deplib" && dir="."
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if grep "^installed=no" $deplib > /dev/null; then
+		  path="-L$absdir/$objdir"
+		else
+		  eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  if test -z "$libdir"; then
+		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		    exit 1
+		  fi
+		  if test "$absdir" != "$libdir"; then
+		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+		  fi
+		  path="-L$absdir"
+		fi
+		;;
+	      *) continue ;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	    done
+	  fi
+	fi
+      done
+      dependency_libs="$newdependency_libs"
+      if test $pass = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test $pass != dlopen; then
+	if test $pass != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) lib_search_path="$lib_search_path $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
+
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Make sure that $var contains only unique libraries
+	  # and add them in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    case "$deplib" in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    *)
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) tmp_libs="$tmp_libs $deplib" ;;
+	      esac
+	      ;;
+	    *) tmp_libs="$tmp_libs $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done
+      fi
+    done
+    if test $linkmode = prog; then
+      dlfiles="$newdlfiles"
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+      fi
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      objs="$objs$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	if test "$module" = no; then
+	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  eval libname=\"$libname_spec\"
+	else
+	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test "$deplibs_check_method" != pass_all; then
+	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+	  exit 1
+	else
+	  echo
+	  echo "*** Warning: Linking the shared library $output against the non-libtool"
+	  echo "*** objects $objs is not portable!"
+	  libobjs="$libobjs $objs"
+	fi
+      fi
+
+      if test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+      fi
+
+      set dummy $rpath
+      if test $# -gt 2; then
+	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a `.al' extension so
+          # convenience libraries should have the same extension an
+          # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	if test -n "$vinfo"; then
+	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+	fi
+
+	if test -n "$release"; then
+	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+	fi
+      else
+
+	# Parse the version information argument.
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	IFS="$save_ifs"
+
+	if test -n "$8"; then
+	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	current="$2"
+	revision="$3"
+	age="$4"
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0 | [1-9] | [1-9][0-9]*) ;;
+	*)
+	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case $revision in
+	0 | [1-9] | [1-9][0-9]*) ;;
+	*)
+	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case $age in
+	0 | [1-9] | [1-9][0-9]*) ;;
+	*)
+	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	if test $age -gt $current; then
+	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  minor_current=`expr $current + 1`
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current";
+	  ;;
+
+	irix)
+	  major=`expr $current - $age + 1`
+	  verstring="sgi$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test $loop != 0; do
+	    iface=`expr $revision - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="sgi$major.$iface:$verstring"
+	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
+	  ;;
+
+	linux)
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  major=`expr $current - $age`
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test $loop != 0; do
+	    iface=`expr $current - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  verstring="$verstring:${current}.0"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
+	  major=`expr $current - $age`
+	  versuffix="-$major"
+	  ;;
+
+	*)
+	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  verstring="0.0"
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+      fi
+
+      if test "$mode" != relink; then
+	# Remove our outputs, but don't remove object files since they
+        # may have been created when compiling PIC objects.
+        removelist=
+        tempremovelist=`echo "$output_objdir/*"`
+	for p in $tempremovelist; do
+          case $p in
+            *.$objext)
+               ;;
+            $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+               removelist="$removelist $p"
+               ;;
+            *) ;;
+          esac
+        done
+        if test -n "$removelist"; then
+	  $show "${rm}r $removelist"
+	  $run ${rm}r $removelist
+        fi
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      for path in $uninst_path; do
+	lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
+	deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
+	dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
+      done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  temp_xrpath="$temp_xrpath -R$libdir"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+	if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) dlfiles="$dlfiles $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) dlprefiles="$dlprefiles $lib" ;;
+	esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    deplibs="$deplibs -framework System"
+	    ;;
+	  *)
+ 	    # Add libc to deplibs on all other systems if necessary.
+ 	    if test $build_libtool_need_lc = "yes"; then
+ 	      deplibs="$deplibs -lc"
+ 	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behaviour.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $rm conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $rm conftest
+	  $LTCC -o conftest conftest.c $deplibs
+	  if test $? -eq 0 ; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      name="`expr $i : '-l\(.*\)'`"
+	      # If $name is empty we are operating on a -L argument.
+	      if test "$name" != "" -a "$name" != "0"; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		set dummy $deplib_matches
+		deplib_match=$2
+		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		  newdeplibs="$newdeplibs $i"
+		else
+		  droppeddeps=yes
+		  echo
+		  echo "*** Warning: This library needs some functionality provided by $i."
+		  echo "*** I have the capability to make that library automatically link in when"
+		  echo "*** you link to this library.  But I can only do this if you have a"
+		  echo "*** shared version of the library, which you do not appear to have."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  else
+	    # Error occured in the first compile.  Let's try to salvage the situation:
+	    # Compile a seperate program for each library.
+	    for i in $deplibs; do
+	      name="`expr $i : '-l\(.*\)'`"
+	     # If $name is empty we are operating on a -L argument.
+	      if test "$name" != "" -a "$name" != "0"; then
+		$rm conftest
+		$LTCC -o conftest conftest.c $i
+		# Did it work?
+		if test $? -eq 0 ; then
+		  ldd_output=`ldd conftest`
+		  libname=`eval \\$echo \"$libname_spec\"`
+		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		  set dummy $deplib_matches
+		  deplib_match=$2
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    newdeplibs="$newdeplibs $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    echo "*** Warning: This library needs some functionality provided by $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which you do not appear to have."
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "***  make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method
+	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    # If $name is empty we are operating on a -L argument.
+	    if test "$name" != "" -a "$name" != "0"; then
+	      libname=`eval \\$echo \"$libname_spec\"`
+	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		    for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null \
+			 | grep " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | sed 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+			 | sed 10q \
+			 | egrep "$file_magic_regex" > /dev/null; then
+			newdeplibs="$newdeplibs $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		    done
+	      done
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		echo "*** Warning: This library needs some functionality provided by $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have."
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
+	     grep . >/dev/null; then
+	    echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	  fi
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test $allow_undefined = no; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	if test $hardcode_into_libs = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		dep_rpath="$dep_rpath $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) perm_rpath="$perm_rpath $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      rpath="$rpath$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath="$finalize_shlibpath"
+	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	realname="$2"
+	shift; shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+	if test x$dlname = x; then
+	  dlname=$soname
+	fi
+
+	lib="$output_objdir/$realname"
+	for link
+	do
+	  linknames="$linknames $link"
+	done
+
+#	# Ensure that we have .o objects for linkers which dislike .lo
+#	# (e.g. aix) in case we are running --disable-static
+#	for obj in $libobjs; do
+#	  xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+#	  if test "X$xdir" = "X$obj"; then
+#	    xdir="."
+#	  else
+#	    xdir="$xdir"
+#	  fi
+#	  baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+#	  oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+#	  if test ! -f $xdir/$oldobj && test "$baseobj" != "$oldobj"; then
+#	    $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
+#	    $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
+#	  fi
+#	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    eval cmds=\"$export_symbols_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd" || exit $?
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex"; then
+	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+	fi
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    $show "${rm}r $gentop"
+	    $run ${rm}r "$gentop"
+	    $show "$mkdir $gentop"
+	    $run $mkdir "$gentop"
+	    status=$?
+	    if test $status -ne 0 && test ! -d "$gentop"; then
+	      exit $status
+	    fi
+	    generated="$generated $gentop"
+
+	    for xlib in $convenience; do
+	      # Extract the objects.
+	      case $xlib in
+	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	      *) xabs=`pwd`"/$xlib" ;;
+	      esac
+	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	      xdir="$gentop/$xlib"
+
+	      $show "${rm}r $xdir"
+	      $run ${rm}r "$xdir"
+	      $show "$mkdir $xdir"
+	      $run $mkdir "$xdir"
+	      status=$?
+	      if test $status -ne 0 && test ! -d "$xdir"; then
+		exit $status
+	      fi
+	      $show "(cd $xdir && $AR x $xabs)"
+	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	      libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+	    done
+	  fi
+	fi
+
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  linker_flags="$linker_flags $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test "$mode" = relink && test "$hardcode_into_libs" = all; then
+	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	  eval cmds=\"$archive_expsym_cmds\"
+	else
+	  eval cmds=\"$archive_cmds\"
+	fi
+        if len=`expr "X$cmds" : ".*"` &&
+           test $len -le $max_cmd_len; then
+          :
+        else
+	  # The command line is too long to link in one step, link piecewise.
+          $echo "creating reloadable object files..."
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+          save_output=$output
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+          test_cmds=
+          concat_cmds=
+          objlist=
+          delfiles=
+          last_robj=
+          k=1
+          output=$output_objdir/$save_output-${k}.$objext
+	  # Loop over the list of objects to be linked.
+          for obj in $save_libobjs
+          do
+            eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+            if test "X$objlist" = X ||
+	       { len=`expr "X$test_cmds" : ".*"` &&
+                 test $len -le $max_cmd_len; }; then
+              objlist="$objlist $obj"
+            else
+	      # The command $test_cmds is almost too long, add a
+	      # command to the queue.
+              if test $k -eq 1 ; then
+	        # The first file doesn't have a previous command to add.
+                eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+              else
+	        # All subsequent reloadable object files will link in
+	        # the last one created.
+                eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+              fi
+              last_robj=$output_objdir/$save_output-${k}.$objext
+              k=`expr $k + 1`
+              output=$output_objdir/$save_output-${k}.$objext
+              objlist=$obj
+              len=1
+            fi
+          done
+	  # Handle the remaining objects by creating one last
+	  # reloadable object file.  All subsequent reloadable object
+	  # files will link in the last one created.
+	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+          eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+
+	  # Set up a command to remove the reloadale object files
+	  # after they are used.
+          i=0
+          while test $i -lt $k
+          do
+            i=`expr $i + 1`
+            delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
+          done
+
+          $echo "creating a temporary reloadable object file: $output"
+
+	  # Loop through the commands generated above and execute them.
+          IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+          for cmd in $concat_cmds; do
+            IFS="$save_ifs"
+            $show "$cmd"
+            $run eval "$cmd" || exit $?
+          done
+          IFS="$save_ifs"
+
+          libobjs=$output
+	  # Restore the value of output.
+          output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+            eval cmds=\"$archive_expsym_cmds\"
+          else
+            eval cmds=\"$archive_cmds\"
+          fi
+
+	  # Append the command to remove the reloadable object files
+	  # to the just-reset $cmds.
+          eval cmds=\"\$cmds~$rm $delfiles\"
+        fi
+        IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+        for cmd in $cmds; do
+          IFS="$save_ifs"
+          $show "$cmd"
+          $run eval "$cmd" || exit $?
+        done
+        IFS="$save_ifs"
+
+	# Restore the uninstalled library and exit
+	if test "$mode" = relink && test "$hardcode_into_libs" = all; then
+	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+	  exit 0
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+      fi
+
+      case $output in
+      *.lo)
+	if test -n "$objs$old_deplibs"; then
+	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+	  exit 1
+	fi
+	libobj="$output"
+	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $run $rm $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec
+      wl=
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	else
+	  gentop="$output_objdir/${obj}x"
+	  $show "${rm}r $gentop"
+	  $run ${rm}r "$gentop"
+	  $show "$mkdir $gentop"
+	  $run $mkdir "$gentop"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$gentop"; then
+	    exit $status
+	  fi
+	  generated="$generated $gentop"
+
+	  for xlib in $convenience; do
+	    # Extract the objects.
+	    case $xlib in
+	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	    *) xabs=`pwd`"/$xlib" ;;
+	    esac
+	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	    xdir="$gentop/$xlib"
+
+	    $show "${rm}r $xdir"
+	    $run ${rm}r "$xdir"
+	    $show "$mkdir $xdir"
+	    $run $mkdir "$xdir"
+	    status=$?
+	    if test $status -ne 0 && test ! -d "$xdir"; then
+	      exit $status
+	    fi
+	    $show "(cd $xdir && $AR x $xabs)"
+	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	    reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+	  done
+	fi
+      fi
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      eval cmds=\"$reload_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	exit 0
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $run eval "echo timestamp > $libobj" || exit $?
+	exit 0
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	eval cmds=\"$reload_cmds\"
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+#     else
+#	# Just create a symlink.
+#	$show $rm $libobj
+#	$run $rm $libobj
+#	xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+#	if test "X$xdir" = "X$libobj"; then
+#	  xdir="."
+#	else
+#	  xdir="$xdir"
+#	fi
+#	baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+#	oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+#	$show "(cd $xdir && $LN_S $oldobj $baseobj)"
+#	$run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
+      fi
+
+      if test -n "$gentop"; then
+	$show "${rm}r $gentop"
+	$run ${rm}r $gentop
+      fi
+
+      exit 0
+      ;;
+
+    prog)
+      case $host in
+        *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
+      esac
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+      fi
+
+      if test "$preload" = yes; then
+	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+	   test "$dlopen_self_static" = unknown; then
+	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+	fi
+      fi
+
+      compile_command="$compile_command $compile_deplibs"
+      finalize_command="$finalize_command $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) perm_rpath="$perm_rpath $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$libdir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      dlsyms=
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	  dlsyms="${outputname}S.c"
+	else
+	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+	fi
+      fi
+
+      if test -n "$dlsyms"; then
+	case $dlsyms in
+	"") ;;
+	*.c)
+	  # Discover the nlist of each of the dlfiles.
+	  nlist="$output_objdir/${outputname}.nm"
+
+	  $show "$rm $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Parse the name list into a source file.
+	  $show "creating $output_objdir/$dlsyms"
+
+	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+	  if test "$dlself" = yes; then
+	    $show "generating symbol list for \`$output'"
+
+	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+	    # Add our own program objects to the symbol list.
+	    progfiles="$objs$old_deplibs"
+	    for arg in $progfiles; do
+	      $show "extracting global C symbols from \`$arg'"
+	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	    done
+
+	    if test -n "$exclude_expsyms"; then
+	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    if test -n "$export_symbols_regex"; then
+	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    # Prepare the list of exported symbols
+	    if test -z "$export_symbols"; then
+	      export_symbols="$output_objdir/$output.exp"
+	      $run $rm $export_symbols
+	      $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	    else
+	      $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+	      $run eval 'mv "$nlist"T "$nlist"'
+	    fi
+	  fi
+
+	  for arg in $dlprefiles; do
+	    $show "extracting global C symbols from \`$arg'"
+	    name=`echo "$arg" | sed -e 's%^.*/%%'`
+	    $run eval 'echo ": $name " >> "$nlist"'
+	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -z "$run"; then
+	    # Make sure we have at least an empty file.
+	    test -f "$nlist" || : > "$nlist"
+
+	    if test -n "$exclude_expsyms"; then
+	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	      $mv "$nlist"T "$nlist"
+	    fi
+
+	    # Try sorting and uniquifying the output.
+	    if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
+	      :
+	    else
+	      grep -v "^: " < "$nlist" > "$nlist"S
+	    fi
+
+	    if test -f "$nlist"S; then
+	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+	    else
+	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
+	    fi
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+	    sed -n -e 's/^: \([^ ]*\) $/  {\"\1\", (lt_ptr_t) 0},/p' \
+		-e 's/^. \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr_t) \&\2},/p' \
+		  < "$nlist" >> "$output_objdir/$dlsyms"
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+  {0, (lt_ptr_t) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	  fi
+
+	  pic_flag_for_symtable=
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
+	    esac;;
+	  *-*-hpux*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag";;
+	    esac
+	  esac
+
+	  # Now compile the dynamic symbol file.
+	  $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+	  # Clean up the generated files.
+	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Transform the symbol file into the correct name.
+	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+	  ;;
+	*)
+	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+	  exit 1
+	  ;;
+	esac
+      else
+	# We keep going just in case the user didn't refer to
+	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+	# really was required.
+
+	# Nullify the symbol file.
+	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      fi
+
+      # AIX runtime linking requires linking programs with -Wl,-brtl and libs with -Wl,-G
+      # Also add -bnolibpath to the beginning of the link line, to clear the hardcoded runpath.
+      # Otherwise, things like the -L path to libgcc.a are accidentally hardcoded by ld.
+      # This does not apply on AIX for ia64, which uses a SysV linker.
+      case "$host" in
+        ia64-*-aix5*) ;;
+        *-*-aix4* | *-*-aix5*)
+                   compile_command=`$echo "X$compile_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"`
+                   finalize_command=`$echo "X$finalize_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` ;;
+      esac
+
+      if test $need_relink = no || test "$build_libtool_libs" != yes; then
+	# Replace the output file specification.
+	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	$show "$link_command"
+	$run eval "$link_command"
+	status=$?
+
+	# Delete the generated files.
+	if test -n "$dlsyms"; then
+	  $show "$rm $output_objdir/${outputname}S.${objext}"
+	  $run $rm "$output_objdir/${outputname}S.${objext}"
+	fi
+
+	exit $status
+      fi
+
+      if test -n "$shlibpath_var"; then
+	# We should set the shlibpath_var
+	rpath=
+	for dir in $temp_rpath; do
+	  case $dir in
+	  [\\/]* | [A-Za-z]:[\\/]*)
+	    # Absolute path.
+	    rpath="$rpath$dir:"
+	    ;;
+	  *)
+	    # Relative path: add a thisdir entry.
+	    rpath="$rpath\$thisdir/$dir:"
+	    ;;
+	  esac
+	done
+	temp_rpath="$rpath"
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$run $rm $output
+	# Link the executable and exit
+	$show "$link_command"
+	$run eval "$link_command" || exit $?
+	exit 0
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      $show "$link_command"
+      $run eval "$link_command" || exit $?
+
+      # Now create the wrapper script.
+      $show "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	  fi
+	done
+	relink_command="cd `pwd`; $relink_command"
+	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Quote $echo for shipping.
+      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+	case $0 in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+	esac
+	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if our run command is non-null.
+      if test -z "$run"; then
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*) exeext=.exe ;;
+	  *) exeext= ;;
+	esac
+	$rm $output
+	trap "$rm $output; exit 1" 1 2 15
+
+	$echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variable:
+  uninst_deplibs='$uninst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$echo are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    echo=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$echo works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$echo will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+	$echo >> $output "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+  done
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  echo >> $output "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" || \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $mkdir \"\$progdir\"
+    else
+      $rm \"\$progdir/\$file\"
+    fi"
+
+	  echo >> $output "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if (eval \$relink_command); then :
+      else
+	$rm \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $rm \"\$progdir/\$program\";
+      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $rm \"\$progdir/\$file\"
+  fi"
+	else
+	  echo >> $output "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	echo >> $output "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $echo >> $output "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $echo >> $output "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	$echo >> $output "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+	case $host in
+	# win32 systems need to use the prog path for dll
+	# lookup to work
+	*-*-cygwin* | *-*-pw32*)
+	  $echo >> $output "\
+      exec \$progdir/\$program \${1+\"\$@\"}
+"
+	  ;;
+
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2*)
+	  $echo >> $output "\
+      exec \$progdir\\\\\$program \${1+\"\$@\"}
+"
+	  ;;
+
+	*)
+	  $echo >> $output "\
+      # Export the path to the program.
+      PATH=\"\$progdir:\$PATH\"
+      export PATH
+
+      exec \$program \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$echo >> $output "\
+      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+    echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+	chmod +x $output
+      fi
+      exit 0
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$objs$old_deplibs $non_pic_objects"
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	$show "${rm}r $gentop"
+	$run ${rm}r "$gentop"
+	$show "$mkdir $gentop"
+	$run $mkdir "$gentop"
+	status=$?
+	if test $status -ne 0 && test ! -d "$gentop"; then
+	  exit $status
+	fi
+	generated="$generated $gentop"
+
+	# Add in members from convenience archives.
+	for xlib in $addlibs; do
+	  # Extract the objects.
+	  case $xlib in
+	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	  *) xabs=`pwd`"/$xlib" ;;
+	  esac
+	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	  xdir="$gentop/$xlib"
+
+	  $show "${rm}r $xdir"
+	  $run ${rm}r "$xdir"
+	  $show "$mkdir $xdir"
+	  $run $mkdir "$xdir"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$xdir"; then
+	    exit $status
+	  fi
+	  $show "(cd $xdir && $AR x $xabs)"
+	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print | $NL2SP`
+	done
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	eval cmds=\"$old_archive_from_new_cmds\"
+      else
+#	# Ensure that we have .o objects in place in case we decided
+#	# not to build a shared library, and have fallen back to building
+#	# static libs even though --disable-static was passed!
+#	for oldobj in $oldobjs; do
+#	  if test ! -f $oldobj; then
+#	    xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
+#	    if test "X$xdir" = "X$oldobj"; then
+#	      xdir="."
+#	    else
+#	      xdir="$xdir"
+#	    fi
+#	    baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
+#	    obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+#	    $show "(cd $xdir && ${LN_S} $obj $baseobj)"
+#	    $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
+#	  fi
+#	done
+
+        eval cmds=\"$old_archive_cmds\"
+
+        if len=`expr "X$cmds" : ".*"` &&
+             test $len -le $max_cmd_len; then
+          :
+        else
+          # the command line is too long to link in one step, link in parts
+          $echo "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+          objlist=
+          concat_cmds=
+          save_oldobjs=$oldobjs
+          for obj in $save_oldobjs
+          do
+            oldobjs="$objlist $obj"
+            objlist="$objlist $obj"
+            eval test_cmds=\"$old_archive_cmds\"
+            if len=`expr "X$test_cmds" : ".*"` &&
+               test $len -le $max_cmd_len; then
+              :
+            else
+              # the above command should be used before it gets too long
+              oldobjs=$objlist
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+              eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+              objlist=
+            fi
+          done
+	  RANLIB=$save_RANLIB
+          oldobjs=$objlist
+          eval cmds=\"\$concat_cmds~$old_archive_cmds\"
+        fi
+      fi
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$generated"; then
+      $show "${rm}r$generated"
+      $run ${rm}r$generated
+    fi
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      $show "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args"
+      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+
+      # Only create the output if not a dry run.
+      if test -z "$run"; then
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+		eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		if test -z "$libdir"; then
+		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		  exit 1
+		fi
+		newdependency_libs="$newdependency_libs $libdir/$name"
+		;;
+	      *) newdependency_libs="$newdependency_libs $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit 1
+	      fi
+	      newdlfiles="$newdlfiles $libdir/$name"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit 1
+	      fi
+	      newdlprefiles="$newdlprefiles $libdir/$name"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  fi
+	  $rm $output
+	  # place dlname in correct position for cygwin
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	  esac
+	  $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test $hardcode_into_libs = all &&
+	     test "$installed" = no && test $need_relink = yes; then
+	    $echo >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      fi
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+      ;;
+    esac
+    exit 0
+    ;;
+
+  # libtool install mode
+  install)
+    modename="$modename: install"
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+      # Aesthetically quote it.
+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$arg "
+      arg="$1"
+      shift
+    else
+      install_prog=
+      arg="$nonopt"
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+    case $arg in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      arg="\"$arg\""
+      ;;
+    esac
+    install_prog="$install_prog$arg"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+	files="$files $dest"
+	dest="$arg"
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f) prev="-f" ;;
+      -g) prev="-g" ;;
+      -m) prev="-m" ;;
+      -o) prev="-o" ;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*) ;;
+
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest="$arg"
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$install_prog $arg"
+    done
+
+    if test -z "$install_prog"; then
+      $echo "$modename: you must specify an install program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	$echo "$modename: no file or destination specified" 1>&2
+      else
+	$echo "$modename: you must specify a destination" 1>&2
+      fi
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Strip any trailing slash from the destination.
+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$destdir" = "X$dest" && destdir=.
+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files
+      if test $# -gt 2; then
+	$echo "$modename: \`$dest' is not a directory" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	library_names=
+	old_library=
+	relink_command=
+	# If there is no directory component, then add one.
+	case $file in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+	test "X$dir" = "X$file/" && dir=
+	dir="$dir$objdir"
+
+	if test "$hardcode_into_libs" = all && test -n "$relink_command"; then
+	  $echo "$modename: warning: relinking \`$file'" 1>&2
+	  $show "$relink_command"
+	  if $run eval "$relink_command"; then :
+	  else
+	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+	    continue
+	  fi
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names
+	if test -n "$2"; then
+	  realname="$2"
+	  shift
+	  shift
+
+	  srcname="$realname"
+	  test "$hardcode_into_libs" = all && test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  $show "$install_prog $dir/$srcname $destdir/$realname"
+	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+	  if test -n "$stripme" && test -n "$striplib"; then
+	    $show "$striplib $destdir/$realname"
+	    $run eval "$striplib $destdir/$realname" || exit $?
+	  fi
+
+	  if test $# -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    for linkname
+	    do
+	      if test "$linkname" != "$realname"; then
+		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+	      fi
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  eval cmds=\"$postinstall_cmds\"
+	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || exit $?
+	  done
+	  IFS="$save_ifs"
+	fi
+
+	# Install the pseudo-library for information purposes.
+	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	instname="$dir/$name"i
+	$show "$install_prog $instname $destdir/$name"
+	$run eval "$install_prog $instname $destdir/$name" || exit $?
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	if test -n "$destfile"; then
+	  $show "$install_prog $file $destfile"
+	  $run eval "$install_prog $file $destfile" || exit $?
+	fi
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+	  $show "$install_prog $staticobj $staticdest"
+	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+	fi
+	exit 0
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Do a test to see if this is really a libtool program.
+	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  uninst_deplibs=
+	  relink_command=
+
+	  # If there is no directory component, then add one.
+	  case $file in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Check the variables that should have been set.
+	  if test -z "$uninst_deplibs"; then
+	    $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
+	    exit 1
+	  fi
+
+	  finalize=yes
+	  for lib in $uninst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      # If there is no directory component, then add one.
+	      case $lib in
+	      */* | *\\*) . $lib ;;
+	      *) . ./$lib ;;
+	      esac
+	    fi
+	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  # If there is no directory component, then add one.
+	  case $file in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    if test "$finalize" = yes && test -z "$run"; then
+	      tmpdir="/tmp"
+	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
+	      tmpdir="$tmpdir/libtool-$$"
+	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+	      else
+		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+		continue
+	      fi
+	      file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	      outputname="$tmpdir/$file"
+	      # Replace the output file specification.
+	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+	      $show "$relink_command"
+	      if $run eval "$relink_command"; then :
+	      else
+		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+		${rm}r "$tmpdir"
+		continue
+	      fi
+	      file="$outputname"
+	    else
+	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
+	    fi
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyways
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    destfile=`echo $destfile | sed -e 's,.exe$,,'`
+	    ;;
+	  esac
+	  ;;
+	esac
+
+	$show "$install_prog$stripme $file $destfile"
+	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+	test -n "$outputname" && ${rm}r "$tmpdir"
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      $show "$install_prog $file $oldlib"
+      $run eval "$install_prog \$file \$oldlib" || exit $?
+
+      if test -n "$stripme" && test -n "$striplib"; then
+	$show "$old_striplib $oldlib"
+	$run eval "$old_striplib $oldlib" || exit $?
+      fi
+
+      # Do each command in the postinstall commands.
+      eval cmds=\"$old_postinstall_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$future_libdirs"; then
+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+    fi
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      test -n "$run" && current_libdirs=" -n$current_libdirs"
+      exec $SHELL $0 --finish$current_libdirs
+      exit 1
+    fi
+
+    exit 0
+    ;;
+
+  # libtool finish mode
+  finish)
+    modename="$modename: finish"
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+	libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  eval cmds=\"$finish_cmds\"
+	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || admincmds="$admincmds
+       $cmd"
+	  done
+	  IFS="$save_ifs"
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $run eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    exit 0
+
+    echo "----------------------------------------------------------------------"
+    echo "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      echo "   $libdir"
+    done
+    echo
+    echo "If you ever happen to want to link against installed libraries"
+    echo "in a given directory, LIBDIR, you must either use libtool, and"
+    echo "specify the full pathname of the library, or use \`-LLIBDIR'"
+    echo "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      echo "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      echo "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
+
+      echo "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      echo "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    echo
+    echo "See any operating system documentation about shared libraries for"
+    echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    echo "----------------------------------------------------------------------"
+    exit 0
+    ;;
+
+  # libtool execute mode
+  execute)
+    modename="$modename: execute"
+
+    # The first argument is the command name.
+    cmd="$nonopt"
+    if test -z "$cmd"; then
+      $echo "$modename: you must specify a COMMAND" 1>&2
+      $echo "$help"
+      exit 1
+    fi
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      if test ! -f "$file"; then
+	$echo "$modename: \`$file' is not a file" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+
+      dir=
+      case $file in
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+
+	# If there is no directory component, then add one.
+	case $file in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
+	else
+	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+	  exit 1
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+	;;
+
+      *)
+	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -*) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  # If there is no directory component, then add one.
+	  case $file in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+      args="$args \"$file\""
+    done
+
+    if test -z "$run"; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved enviroment variables
+      if test "${save_LC_ALL+set}" = set; then
+	LC_ALL="$save_LC_ALL"; export LC_ALL
+      fi
+      if test "${save_LANG+set}" = set; then
+	LANG="$save_LANG"; export LANG
+      fi
+
+      # Now actually exec the command.
+      eval "exec \$cmd$args"
+
+      $echo "$modename: cannot exec \$cmd$args"
+      exit 1
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+	$echo "export $shlibpath_var"
+      fi
+      $echo "$cmd$args"
+      exit 0
+    fi
+    ;;
+
+  # libtool clean and uninstall mode
+  clean | uninstall)
+    modename="$modename: $mode"
+    rm="$nonopt"
+    files=
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -*) rm="$rm $arg" ;;
+      *) files="$files $arg" ;;
+      esac
+    done
+
+    if test -z "$rm"; then
+      $echo "$modename: you must specify an RM program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    rmdirs=
+
+    for file in $files; do
+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$dir" = "X$file"; then
+	dir=.
+	objdir="$objdir"
+      else
+	objdir="$dir/$objdir"
+      fi
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      test $mode = uninstall && objdir="$dir"
+
+      # Remember objdir for removal later, being careful to avoid duplicates
+      if test $mode = clean; then
+        case " $rmdirs " in
+	  *" $objdir "*) ;;
+	  *) rmdirs="$rmdirs $objdir" ;;
+	esac
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  . $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    rmfiles="$rmfiles $objdir/$n"
+	  done
+	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+	  test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+
+	  if test $mode = uninstall; then
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      eval cmds=\"$postuninstall_cmds\"
+	      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		$show "$cmd"
+		$run eval "$cmd"
+	      done
+	      IFS="$save_ifs"
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      eval cmds=\"$old_postuninstall_cmds\"
+	      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		$show "$cmd"
+		$run eval "$cmd"
+	      done
+	      IFS="$save_ifs"
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	  fi
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+
+          # Read the .lo file
+          . $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+          if test -n "$pic_object" \
+             && test "$pic_object" != none; then
+	    rmfiles="$rmfiles $dir/$pic_object"
+          fi
+
+	  # Add non-PIC object to the list of files to remove.
+          if test -n "$non_pic_object" \
+             && test "$non_pic_object" != none; then
+	    rmfiles="$rmfiles $dir/$non_pic_object"
+          fi
+	fi
+	;;
+
+      *)
+	# Do a test to see if this is a libtool program.
+	if test $mode = clean &&
+	   (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  relink_command=
+	  . $dir/$file
+
+	  rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+	  if test "$fast_install" = yes && test -n "$relink_command"; then
+	    rmfiles="$rmfiles $objdir/lt-$name"
+	  fi
+	fi
+	;;
+      esac
+      $show "$rm $rmfiles"
+      $run $rm $rmfiles
+    done
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+        $show "rmdir $dir"
+        $run rmdir $dir >/dev/null 2>&1
+      fi
+    done
+
+    exit 0
+    ;;
+
+  "")
+    $echo "$modename: you must specify a MODE" 1>&2
+    $echo "$generic_help" 1>&2
+    exit 1
+    ;;
+  esac
+
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$generic_help" 1>&2
+  exit 1
+fi # test -z "$show_help"
+
+# We need to display help for each of the modes.
+case $mode in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+    --config          show all configuration variables
+    --debug           enable verbose shell tracing
+-n, --dry-run         display commands without modifying any files
+    --features        display basic configuration information and exit
+    --finish          same as \`--mode=finish'
+    --help            display this help message and exit
+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+    --quiet           same as \`--silent'
+    --silent          don't print informational messages
+    --tag=TAG         use configuration variables from tag TAG
+    --version         print version information
+
+MODE must be one of the following:
+
+      clean           remove files from the build directory
+      compile         compile a source file into a libtool object
+      execute         automatically set library path, then run a program
+      finish          complete the installation of libtool libraries
+      install         install libraries or executables
+      link            create a library or an executable
+      uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE."
+  exit 0
+  ;;
+
+clean)
+  $echo \
+"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+compile)
+  $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -static           always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+  ;;
+
+execute)
+  $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+  ;;
+
+finish)
+  $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+  ;;
+
+install)
+  $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+  ;;
+
+link)
+  $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+		    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+		    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -static           do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+		    specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+  ;;
+
+uninstall)
+  $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+*)
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+  ;;
+esac
+
+echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit 0
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+### END LIBTOOL TAG CONFIG: disable-shared
+
+### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/krozat/admin/missing b/krozat/admin/missing
new file mode 100755
index 0000000..5f9da90
--- /dev/null
+++ b/krozat/admin/missing
@@ -0,0 +1,265 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing 0.3 - GNU automake"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acinclude.m4' or \`configure.in'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`configure.in'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acconfig.h' or \`configure.in'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  tar)
+    shift
+    if test -n "$run"; then
+      echo 1>&2 "ERROR: \`tar' requires --run"
+      exit 1
+    fi
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar ${1+"$@"} && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar ${1+"$@"} && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" ${1+"$@"} && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" ${1+"$@"} && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequirements for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
diff --git a/krozat/admin/mkinstalldirs b/krozat/admin/mkinstalldirs
new file mode 100755
index 0000000..6b3b5fc
--- /dev/null
+++ b/krozat/admin/mkinstalldirs
@@ -0,0 +1,40 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+# $Id$
+
+errstatus=0
+
+for file
+do
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d
+   do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+        echo "mkdir $pathcomp"
+
+        mkdir "$pathcomp" || lasterr=$?
+
+        if test ! -d "$pathcomp"; then
+  	  errstatus=$lasterr
+        fi
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# mkinstalldirs ends here
diff --git a/krozat/admin/ylwrap b/krozat/admin/ylwrap
new file mode 100755
index 0000000..8aa0314
--- /dev/null
+++ b/krozat/admin/ylwrap
@@ -0,0 +1,142 @@
+#! /bin/sh
+# ylwrap - wrapper for lex/yacc invocations.
+# Copyright 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Usage:
+#     ylwrap PROGRAM INPUT [OUTPUT DESIRED]... -- [ARGS]...
+# * PROGRAM is program to run.
+# * INPUT is the input file
+# * OUTPUT is file PROG generates
+# * DESIRED is file we actually want
+# * ARGS are passed to PROG
+# Any number of OUTPUT,DESIRED pairs may be used.
+
+# The program to run.
+prog="$1"
+shift
+# Make any relative path in $prog absolute.
+case "$prog" in
+ /* | [A-Za-z]:*) ;;
+ */*) prog="`pwd`/$prog" ;;
+esac
+
+# The input.
+input="$1"
+shift
+case "$input" in
+ /* | [A-Za-z]:*)
+    # Absolute path; do nothing.
+    ;;
+ *)
+    # Relative path.  Make it absolute.  Why?  Because otherwise any
+    # debugging info in the generated file will point to the wrong
+    # place.  This is really gross.
+    input="`pwd`/$input"
+    ;;
+esac
+
+# We don't want to use the absolute path if the input in the current
+# directory like when making a tar ball.
+input_base=`echo $input | sed -e 's|.*/||'`
+if test -f $input_base && cmp $input_base $input >/dev/null 2>&1; then
+  input=$input_base
+fi
+
+pairlist=
+while test "$#" -ne 0; do
+   if test "$1" = "--"; then
+      shift
+      break
+   fi
+   pairlist="$pairlist $1"
+   shift
+done
+
+# FIXME: add hostname here for parallel makes that run commands on
+# other machines.  But that might take us over the 14-char limit.
+dirname=ylwrap$$
+trap "cd `pwd`; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15
+mkdir $dirname || exit 1
+
+cd $dirname
+case "$input" in
+ /* | [A-Za-z]:*)
+    # Absolute path; do nothing.
+    ;;
+ *)
+    # Make a symbolic link, hard link or hardcopy.
+    ln -s ../"$input" . > /dev/null 2>&1 || ln ../"$input" . > /dev/null 2>&1 || cp ../"$input" .
+    ;;
+esac
+$prog ${1+"$@"} "$input"
+status=$?
+
+if test $status -eq 0; then
+   set X $pairlist
+   shift
+   first=yes
+   # Since DOS filename conventions don't allow two dots,
+   # the DOS version of Bison writes out y_tab.c instead of y.tab.c
+   # and y_tab.h instead of y.tab.h. Test to see if this is the case.
+   y_tab_nodot="no"
+   if test -f y_tab.c || test -f y_tab.h; then
+      y_tab_nodot="yes"
+   fi
+
+   while test "$#" -ne 0; do
+      from="$1"
+      # Handle y_tab.c and y_tab.h output by DOS
+      if test $y_tab_nodot = "yes"; then
+	 if test $from = "y.tab.c"; then
+	    from="y_tab.c"
+	 else
+	    if test $from = "y.tab.h"; then
+	       from="y_tab.h"
+	    fi
+	 fi
+      fi
+      if test -f "$from"; then
+         # If $2 is an absolute path name, then just use that,
+         # otherwise prepend `../'.
+         case "$2" in
+	   /* | [A-Za-z]:*) target="$2";;
+	   *) target="../$2";;
+	 esac
+	 mv "$from" "$target" || status=$?
+      else
+	 # A missing file is only an error for the first file.  This
+	 # is a blatant hack to let us support using "yacc -d".  If -d
+	 # is not specified, we don't want an error when the header
+	 # file is "missing".
+	 if test $first = yes; then
+	    status=1
+	 fi
+      fi
+      shift
+      shift
+      first=no
+   done
+else
+   status=$?
+fi
+
+# Remove the directory.
+cd ..
+rm -rf $dirname
+
+exit $status