From 5ce8d30439463838f845c78bc926cc9b310a8743 Mon Sep 17 00:00:00 2001 From: Pascal Rigaux Date: Tue, 27 Jan 2009 17:30:08 +0000 Subject: imported openSUSE.tar.bz2 (from gfxboot-4.1.19-2.1.src.rpm) --- help-boot.ro.html | 130 ------------------------------------------------------ 1 file changed, 130 deletions(-) delete mode 100644 help-boot.ro.html (limited to 'help-boot.ro.html') diff --git a/help-boot.ro.html b/help-boot.ro.html deleted file mode 100644 index 8f36d2f..0000000 --- a/help-boot.ro.html +++ /dev/null @@ -1,130 +0,0 @@ - - - - - - -
-

Utilizarea sistemului de ajutor

- -Documentaţia de ajutor on-line a încărcătorului de sistem este -senzitivă la context. Ea vă oferă informaţii despre itemul de meniu -selectat sau, dacă editaţi opţiuni de pornire, încearcă să caute -informaţii despre opţiunea la care este poziţionat cursorul.
-
-Taste de navigare

- - Săgeata sus: evidenţiază legătura precendentă
- Săgeata jos: evidenţiază legătura următoare
- Săgeata stînga, Backspace: merge la subiectul precedent
- Săgeata dreapta, Enter, Space: activează legătura
- Page Up: defilează o pagină în sus
- Page Down: defilează o pagină în jos
- Home: sare la începutul paginii
- End: sare la sfîrşitul paginii
- Esc: iese din documetaţia de ajutor
- -
Înapoi la Opţiuni de pornire - - -
-

Selectare mapare de tastatură şi limbă

- -Press F2 to change language and keyboard layout the boot loader uses. - -
Înapoi la Opţiuni de pornire - - -
-

Alegere profil

- -Press F3 to select a profile. Your system will be started using the -configuration saved in this profile. - -
Înapoi la Opţiuni de pornire - - -
-

Opţiuni de pornire

- - splash -- influence the behavior of the splash screen
- apm -- toggle power management
- acpi -- advanced configuration and power interface
- ide -- control the IDE subsystem
- -
-

Opţiuni kernel: splash

- -The splash screen is the picture shown during system start-up.
-
-splash=0
-The splash screen is switched off. This may be useful -with very old monitors or if some error occurs.
-
-splash=verbose
Activates splash, kernel and boot messages are -still shown.
-
-splash=silent
-Activates splash, but no messages. Instead a progress bar is drawn.
- -
Înapoi la Opţiuni de pornire - - -
-

Opţiuni kernel: apm

- -APM is one of the two power management strategies used on current -computers. It is mainly used with laptops for functions like suspend -to disk, but it may also be responsible for switching off the -computer after power down. APM relies on a correct working BIOS. If -the BIOS is broken, APM may have only limited use or even prevent the -computer from working. Therefore, it may be switched off with the -parameter

- - apm=off -- switch off APM completely

- -Some very new computers may benefit more from the newer -ACPI. - -
-
Înapoi la Opţiuni de pornire - - -
-

Opţiuni kernel: acpi

- -ACPI (Advanced Configuration and Power Interface) is a -standard that defines power and configuration management interfaces -between an operating system and the BIOS. By default, acpi is -switched on when a BIOS is detected that is newer than from year -2000. There are several commonly -used parameters to control the behavior of ACPI:
-
- pci=noacpi -- do not use ACPI to route PCI interrupts - acpi=oldboot -- only the parts of ACPI that are relevant -for booting remain activated
- acpi=off -- switch off ACPI completely
- acpi=force -- switch on ACPI even if your BIOS is dated -before 2000
-
-Especially on new computers, it replaces the old -apm system. - - -

Înapoi la Opţiuni de pornire - - -
-

Opţiuni kernel: ide

- -IDE is, unlike SCSI, commonly used in most desktop workstations. -To circumvent some hardware problems that occur with IDE systems, use the -kernel parameter:

- - ide=nodma -- switch off dma for IDE drives
- - - -

Înapoi la Opţiuni de pornire - - -- cgit v1.2.1