Revert "(temporary) Convert draklive-install to use polkit, not consolehelper."

This reverts commit f740ecb1f5cec298aa05b8c946e3d06a1d446395.
The draklive-install package has been updated to incorporate
these changes.

6 files changed, 0 insertions, 589 deletions

diff --git a/config/live.cfg b/config/live.cfg
index 252414d..fb6e849 100644
--- a/config/live.cfg
+++ b/config/live.cfg
@@ -103,13 +103,6 @@ my $_l = {
             (map { [ 'files/draksnapshot.sysconfig', $_ . '/.draksnapshot', { mode => 0644, no_install => 1 } ] } @user_config_dirs),
             [ 'files/compute-ooo-dicts.pl', '/usr/sbin/compute-ooo-dicts.pl', { mode => 0755 } ],
             [ 'files/compute-i18n-list.pl', '/usr/sbin/compute-i18n-list.pl', { mode => 0755 } ],
-
-	    # Changes to draklive-install - remove once these are pushed
-            [ 'files/WIP/draklive-install', '/usr/sbin/draklive-install', { mode => 0755 } ],
-            [ 'files/WIP/draklive-install.wrapper', '/usr/bin/draklive-install', { mode => 0755 } ],
-            [ 'files/WIP/mageia-draklive-install.desktop', '/usr/share/applications/mageia-draklive-install.desktop', { mode => 0644 } ],
-            [ 'files/WIP/org.mageia.draklive-install.policy', '/usr/share/polkit-1/actions/org.mageia.draklive-install.policy', { mode => 0644, no_install => 1 } ],
-            [ 'files/WIP/org.mageia.draklive-install-lock-storage.policy', '/usr/share/polkit-1/actions/org.mageia.draklive-install-lock-storage.policy', { mode => 0644, no_install => 1 } ],
         ],
         remove_files => [
             (map { "/etc/modprobe.preload.d/$_" } qw(cpufreq pcmcia rfswitch)),
diff --git a/files/WIP/draklive-install b/files/WIP/draklive-install
deleted file mode 100755
index c831c5f..0000000
--- a/files/WIP/draklive-install
+++ /dev/null
@@ -1,450 +0,0 @@
-#!/usr/bin/perl
-
-# Must be done as early as possible to avoid issues when displaying translated
-# strings
-BEGIN {
-    push @::textdomains, 'draklive-install';
-}
-
-use lib qw(/usr/lib/libDrakX);
-use standalone;
-use interactive;
-use fs;
-use fs::any;
-use fs::type;
-use fs::partitioning;
-use fs::partitioning_wizard;
-use partition_table;
-use MDK::Common;
-use common;
-use feature qw(state);
-
-($::real_windowwidth, $::real_windowheight) = (600, 400);
-
-{
-    use diskdrake::interactive;
-    package diskdrake::interactive;
-    my $old = \&hd_possible_actions_base;
-    undef *hd_possible_actions_base;
-    *hd_possible_actions_base = sub {
-	#- for the partition wizard to show the auto-allocate option
-	local $::isInstall = 1;
-	&$old;
-    };
-    undef *Done;
-    #- skip the fstab/reboot checks (see below FIXME note)
-    *Done = \&diskdrake_interactive_Done;
-    #- don't ask whether to Move/Hide old files (FIXME: add a method to skip that to diskdrake::interactive)
-    undef *need_migration;
-    *need_migration = sub { 'hide' };
-}
-
-install_live();
-
-sub install_live() {
-    my $in = 'interactive'->vnew('su');
-    $in->{pop_wait_messages} = 0;
-
-    $::isWizard = 1;
-    $::Wizard_no_previous = 1;
-    $::Wizard_pix_up = "draklive-install";
-    any::set_wm_hints_if_needed($in);
-
-    my $all_hds = {};
-    my $fstab = [];
-    $::prefix = '/mnt/install';
-
-    my $system_file = '/etc/sysconfig/draklive-install';
-    my %settings = getVarsFromSh($system_file);
-
-    my $copy_source = $settings{SOURCE} || '/';
-    my $live_media = '/live/media';
-
-    display_start_message();
-    init_hds($in, $all_hds, $fstab, $live_media);
-    ask_partitions_loop($in, $all_hds, $fstab, $copy_source);
-    remove_unused_packages($in, $copy_source);
-    prepare_root($in);
-    copy_root($in, $copy_source);
-    complete_install($in, $all_hds);
-    setup_bootloader($in, $all_hds, $fstab);
-    finish_installation($fstab);
-    display_end_message($in);
-    $in->exit(0);
-}
-
-sub umount_all {
-    my ($fstab) = @_;
-    #- make sure nothing is mounted in the new root
-    foreach (sort { $b cmp $a } grep { /^$::prefix/ } map { (split)[1] } cat_('/proc/mounts')) {
-        system('umount', $_);
-    }
-    #- make sure selected devices aren't mounted, and swap isn't used
-    foreach (grep { isSwap($_) } @$fstab) {
-        eval { fs::mount::swapoff($_->{device}) };
-    }
-    foreach (map { $_->{mntpoint} && !isSwap($_) ? "/dev/$_->{device}" : () } @$fstab) {
-        system('umount', $_);
-    }
-}
-
-sub on_reboot_needed {
-    my ($in) = @_;
-    fs::partitioning_wizard::warn_reboot_needed($in);
-    $in->exit(0);
-}
-
-sub display_start_message() {
-    require any;
-    my $has_running_wm = to_bool(any::running_window_manager());
-    local $::isStandalone = $has_running_wm; # center me if run in xsetup.d script
-    mygtk3::enable_quit_popup(1);
-    my $w = ugtk3->new(N("Mageia Live"));
-    ugtk3::gtkadd($w->{window},
-                  ugtk3::gtkcreate_img("MageiaLive-install"),
-                  ugtk3::gtknew('Label', height => 5),
-                  N("This wizard will help you to install the live distribution."),
-                  ugtk3::create_okcancel($w));
-    $w->{ok}->grab_focus;
-    $w->main;
-}
-
-sub umount_first_pass() {
-    local $::prefix = undef;
-    my $all_hds = fsedit::get_hds();
-    fs::get_raw_hds('', $all_hds);
-    fs::get_info_from_fstab($all_hds);
-    my $fstab = [ fs::get::fstab($all_hds) ];
-    fs::merge_info_from_mtab($fstab);
-
-    #- inlined from fs::mount::umount_all to go on when one umount fail
-    #- (maybe the sort function could be shared)
-    log::l("unmounting all filesystems");
-    foreach (sort { $b->{mntpoint} cmp $a->{mntpoint} } 
-	       grep { $_->{mntpoint} && !$_->{real_mntpoint} } @$fstab) {
-	eval { fs::mount::umount_part($_) };
-	log::l("error unmounting $_->{mntpoint}: $@") if $@;
-    }
-}
-
-sub init_hds {
-    my ($in, $all_hds, $fstab, $live_media) = @_;
-    my $wait = $in->wait_message('', N("Please wait"));
-    umount_first_pass();
-    eval { fs::any::get_hds($all_hds, $fstab, [], {}, 'skip_mtab', $in) };
-
-    #- fs::any::get_hds does not return mounts that are not in fstab
-    my @mounted = fs::read_fstab('', '/proc/mounts');
-    my $live_part = find { $_->{mntpoint} eq $live_media } @mounted;
-    my $live_device = $live_part && $live_part->{device};
-    #- remove live device from the detected hds, so that bootloader is not installed on it:
-    #-  bootloader installation uses first device from detect_devices::get, which tries to list devices
-    #-  by booting order, and our live system is likely to be here in first position
-    #- it can be either a partition (USB) or the full disk (Hybrid on USB)
-    @{$all_hds->{hds}} = grep {
-        $_->{device} ne $live_device &&
-        !member($live_device, map { $_->{device} } partition_table::get_normal_parts_and_holes($_));
-    } @{$all_hds->{hds}} if $live_device;
-
-    my $err = $@;
-    umount_all($fstab);
-    if ($err) {
-        undef $wait;
-        $in->ask_warn(N("Error"), [ formatError($err) ]);
-        $in->exit(1);
-    }
-}
-
-sub ask_partitions_loop {
-    my ($in, $all_hds, $fstab, $copy_source) = @_;
-
-    while (1) {
-        eval { ask_partitions($in, $all_hds, $fstab, $copy_source) };
-        my $err = $@ or last;
-        $in->exit(1) if $err =~ /wizcancel/ ||
-          !$in->ask_warn(N("Error"), [ N("An error occurred"), formatError($err) ]);
-    }
-}
-
-sub ask_partitions {
-    my ($in, $all_hds, $fstab, $copy_source) = @_;
-    fs::partitioning_wizard::main($in, $all_hds, $fstab, [], undef, {}, 'skip_mtab');
-
-    mkdir_p($::prefix) or die "unable to create $::prefix";
-
-    fs::any::write_hds($all_hds, $fstab, undef, sub { on_reboot_needed($in) }, {});
-    fs::any::check_hds_boot_and_root($all_hds, $fstab);
-    fs::partitioning::choose_partitions_to_format($in, $fstab);
-
-    my $total = get_total_size($in, $copy_source);
-    my $available = fs::any::getAvailableSpace($fstab, 'skip_mounted', 1);
-    $total += fs::any::getNeededMinSpace($available);
-    die N("Not enough space available (%s available while %s are needed)",
-          formatXiB($available), formatXiB($total)) . "\n"
-      if $total > $available;
-
-    umount_all($fstab);
-    fs::partitioning::format_mount_partitions($in, $all_hds, $fstab);
-}
-
-sub remove_unused_packages {
-    my ($in, $o_prefix) = @_;
-    require pkgs;
-    #in remove_unused_packages, we want to get the locale from the currently
-    #running system, but we want to remove unused packages from the 
-    #system based in $o_prefix, that's why we use an extra arg instead of 
-    #directly using $::prefix
-    local $::prefix;
-    pkgs::remove_unused_packages($in, $in->do_pkgs, $o_prefix);
-}
-
-sub prepare_root {
-    my ($in) = @_;
-    #- create required directories and devices (early to have a consistent root before calling other programs)
-    my $_wait = $in->wait_message('', N("Please wait"));
-    fs::any::prepare_minimal_root();
-}
-
-sub build_copy_command {
-    my ($source, $dest) = @_;
-    join(' ',
-         'tar', 'c', '--one-file-system', '-C', $source, '.',
-         '|',
-         'tar', 'xvv', '-C', $dest,
-     );
-}
-
-sub get_total_size {
-    my ($in, $source) = @_;
-    state %total;
-    return $total{$source} if $total{$source};
-    my $_wait = $in->wait_message('', N("Computing total size"));
-    $total{$source} = first(split(/\s+/, `du -sbx /run/mgalive/ovlsize 2>/dev/null`));
-}
-
-sub sync_logs() {
-    cp_af('/var/log', $::prefix . '/var');
-}
-
-sub copy_root {
-    my ($in, $copy_source) = @_;
-    my $total = get_total_size($in, $copy_source);
-
-    my ($wait, $update_progress) = copying_message_with_progress_bar($in, N("Copying in progress"));
-    open(my $OUTPUT, '-|', build_copy_command($copy_source, $::prefix));
-    {
-        local $_;
-        my $current = my $previous = 0;
-        while (<$OUTPUT>) {
-            (undef, undef, my $size) = split;
-            $current += $size;
-            if ($current <= $total && $current/$total > $previous/$total + 0.001) {
-                $update_progress->('', $current, $total);
-                $previous = $current;
-            }
-        }
-    }
-    if (!close($OUTPUT)) {
-        undef $wait;
-        undef $update_progress;
-        $in->ask_warn(N("Error"), N("Unable to copy files to new root"));
-        $in->exit(1);
-    }
-    sync_logs();
-}
-
-sub clean_harddrake_hds {
-    my ($prefix) = @_;
-    #- remove harddisks from harddrake's config file, so that hardddisks
-    #- are automatically rediscovered at first boot
-    require Storable;
-    my $harddrake_file = $prefix . "/etc/sysconfig/harddrake2/previous_hw";
-    my $harddrake_conf = eval { Storable::retrieve($harddrake_file) };
-    if ($harddrake_conf) {
-        delete $harddrake_conf->{HARDDISK};
-        Storable::store($harddrake_conf, $harddrake_file);
-    }
-}
-
-
-sub complete_install {
-    my ($in, $all_hds) = @_;
-    my $_wait = $in->wait_message('', N("Please wait"));
-
-    my $real_rpm_dir = "/tmp/rpm/real";
-    cp_f(glob($real_rpm_dir . "/*"), $::prefix . "/var/lib/rpm") if -d $real_rpm_dir;
-
-    #- FIXME: maybe factorize with draklive, using draklive --clean-chroot ?
-    #- remove unwanted files and packages
-    my $live_user = chomp_(cat_('/etc/draklive-install.d/user'));
-    my $live_user_desktop = $live_user && chomp_(run_program::rooted_get_stdout($::prefix, "su - $live_user -c 'xdg-user-dir DESKTOP'"));
-    unlink(map { $::prefix . $_ } '/.autofsck',
-           chomp_(cat_(glob('/etc/draklive-install.d/remove.d/*'))),
-           if_($live_user_desktop,
-               $live_user_desktop . '/draklive-copy-wizard.desktop',
-               $live_user_desktop . '/draklive-install.desktop'),
-           );
-    {
-        #- do not allow update-menus to create home directory with invalid perms
-        local $ENV{HOME} = '/root';
-        system('chroot', $::prefix, 'rpm', '-e', 'draklive-install');
-    }
-
-    foreach (glob('/etc/draklive-install.d/run.d/*')) {
-	    run_program::rooted($::prefix, $_);
-    }
-
-    #- copy sysconfig files for first boot
-    cp_f(glob('/etc/draklive-install.d/sysconfig/*'), $::prefix . '/etc/sysconfig');
-
-    #- unselect live user in kdm
-    my $kdm_cfg = common::read_alternative('kdm4-config');
-    update_gnomekderc($::prefix . $kdm_cfg,
-                      'X-:0-Greeter' => (PreselectUser => 'None', DefaultUser => '')) if -f $kdm_cfg;
-    my $autologin = any::get_autologin();
-    delete $autologin->{user};
-    any::set_autologin($in->do_pkgs, $autologin);
-
-    #- allow to install doc in disk install
-    substInFile { undef $_ if /^\%_excludedocs/ } $::prefix . '/etc/rpm/macros';
-
-    fs::write_fstab($all_hds, $::prefix);
-
-    clean_harddrake_hds($::prefix);
-
-    # enable back some disabled services
-    require services;
-    services::start_service_on_boot($_) foreach chomp_(cat_('/etc/draklive-install.d/services'));
-
-    sync_logs();
-}
-
-sub setup_bootloader {
-    my ($in, $all_hds, $fstab) = @_;
-    use bootloader;
-    my $bootloader = {};
-    any::setupBootloaderBeforeStandalone($in->do_pkgs, $bootloader, $all_hds, $fstab);
-    local $::Wizard_no_previous = 0;
-    any::setupBootloaderUntilInstalled($in, $bootloader, $all_hds, $fstab, $ENV{SECURE_LEVEL});
-    sync_logs();
-}
-
-sub clean_live_system_hds() {
-    #- clean fstab and harddrake config in the live system
-    #- since partitions UUIDs of the installed system have been modified
-    #- (useful for persistent live systems)
-    local $::prefix = undef;
-    clean_harddrake_hds($::prefix);
-    my $all_hds = fs::get::empty_all_hds(); #- skip real harddisks
-    fs::get_raw_hds('', $all_hds);
-    fs::get_info_from_fstab($all_hds);
-    fs::write_fstab($all_hds, $::prefix);
-}
-
-sub finish_installation {
-    my ($fstab) = @_;
-    #- remove the extra permission draklive added
-    run_program::rooted($::prefix, 'sed', '-i', '/for draklive-install/d', '/etc/pam.d/polkit-1');
-    sync_logs();
-    #- cleanly umount here, it will avoid fs journals to be corrupted after a hackish reboot
-    umount_all($fstab);
-    clean_live_system_hds();
-}
-
-sub display_end_message {
-    my ($in) = @_;
-    $::Wizard_finished = 1;
-    $in->ask_okcancel(N("Congratulations"), N("Please halt your computer, remove your live system, and restart your computer."));
-}
-
-###
-### duplicate code
-###
-
-# FIXME: code begins to fork
-# FIXME: => in mga4 add diskdrake::interactive::set_skip_fstab_reboot_steps() and use it instead
-
-#- from disdrake::interactive
-{
-    package diskdrake::interactive;
-  sub diskdrake_interactive_Done {
-    my ($in, $all_hds) = @_;
-    eval { raid::verify($all_hds->{raids}) };
-    if (my $err = $@) {
-	$::expert or die;
-	$in->ask_okcancel('', [ formatError($err), N("Continue anyway?") ]) or return;
-    }
-    foreach (@{$all_hds->{hds}}) {
-	if (!write_partitions($in, $_, 'skip_check_rebootNeeded')) {
-	    return if !$::isStandalone;
-	    $in->ask_yesorno(N("Quit without saving"), N("Quit without writing the partition table?"), 1) or return;
-	}
-    }
-    #- skip that fstab/reboot steps
-    if (!$::isInstall && 0) { 
-	my $new = fs::fstab_to_string($all_hds);
-	if ($new ne $all_hds->{current_fstab} && $in->ask_yesorno('', N("Do you want to save /etc/fstab modifications"), 1)) {
-	    $all_hds->{current_fstab} = $new;
-	    fs::write_fstab($all_hds);
-	}
-	update_bootloader_for_renumbered_partitions($in, $all_hds);
-
-	if (any { $_->{rebootNeeded} } @{$all_hds->{hds}}) {
-	    $in->ask_warn('', N("You need to reboot for the partition table modifications to take place"));
-	    tell_wm_and_reboot();
-	}
-    }
-    if (my $part = find { $_->{mntpoint} && !maybeFormatted($_) } fs::get::fstab($all_hds)) {
-	$in->ask_okcancel('', N("You should format partition %s.
-Otherwise no entry for mount point %s will be written in fstab.
-Quit anyway?", $part->{device}, $part->{mntpoint})) or return if $::isStandalone && 0; #- no, please
-    }
-    1;
-  }
-}
-
-# forked from interactive::wait_message
-sub copying_message {
-    my ($o, $title, $message, $b_temp) = @_;
-
-    my $w = $o->wait_messageW($title, N("Copying in progress"), ugtk3::gtknew('VBox', padding => 5, children_tight => [
-        ugtk3::gtkcreate_img("MageiaLive-advert"),
-        $message,
-    ]));
-    push @tempory::objects, $w if $b_temp;
-    my $b = before_leaving { $o->wait_message_endW($w) };
-
-    #- enable access through set
-    MDK::Common::Func::add_f4before_leaving(sub { $o->wait_message_nextW($_[1], $w) }, $b, 'set');
-    $b;
-}
-
-# forked from interactive::gtk::wait_message_with_progress_bar
-sub copying_message_with_progress_bar {
-    my ($in, $o_title) = @_;
-
-    my $progress = Gtk3::ProgressBar->new;
-    my $w = copying_message($in, $o_title, $progress);
-    my $displayed;
-    $progress->signal_connect(draw => sub { $displayed = 1; 0 });
-    $w, sub {
-	my ($msg, $current, $total) = @_;
-	if ($msg) {
-	    $w->set($msg);
-	}
-
-	if ($total) {
-	    $progress or internal_error('You must first give some text to display');
-	    my $fraction = min(1, $current / $total);
-	    if ($fraction != $progress->get_fraction) {
-		$progress->set_fraction($fraction);
-		$progress->show;
-		$displayed = 0;
-		mygtk3::flush() while !$displayed;
-	    }
-	} else {
-	    $progress->hide;
-	    mygtk3::flush();
-	}
-    };
-}
diff --git a/files/WIP/draklive-install.wrapper b/files/WIP/draklive-install.wrapper
deleted file mode 100755
index 5a8f4eb..0000000
--- a/files/WIP/draklive-install.wrapper
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-if  [[ "$UID" != "0" ]] ; then
-    /usr/bin/pkexec /usr/sbin/draklive-install-lock-storage "$@"
-    exit $?
-fi
-exec /usr/sbin/draklive-install-lock-storage "$@"
diff --git a/files/WIP/mageia-draklive-install.desktop b/files/WIP/mageia-draklive-install.desktop
deleted file mode 100644
index ac88cdc..0000000
--- a/files/WIP/mageia-draklive-install.desktop
+++ /dev/null
@@ -1,82 +0,0 @@
-[Desktop Entry]
-Encoding=UTF-8
-Name=Install on Hard Disk
-Name[ar]=التثبيت على القرص الصلب
-Name[ast]=Instalar nel to discu duru
-Name[bg]=Инсталиране на твърд диск
-Name[br]=Staliañ war ar bladenn galet
-Name[ca]=Instal·la al disc dur
-Name[cs]=Instalace na pevný disk
-Name[cy]=Gosod i'r disg caled
-Name[da]=Installér på harddisk
-Name[de]=Auf die Festplatte installieren
-Name[el]=Εγκατάσταση στο σκληρό δίσκο
-Name[en_GB]=Install on Hard Disk
-Name[es]=Instalar en el Disco Duro
-Name[es_419]=Instalar en disco rígido
-Name[et]=Paigaldamine kõvakettale
-Name[eu]=Instalatu disko zurrunean
-Name[fi]=Asenna kiintolevylle
-Name[fr]=Installer sur disque dur
-Name[hr]=Instaliraj na tvrdi disk
-Name[hu]=Telepítés a merevlemezre
-Name[id]=Install ke Hard Disk
-Name[it]=Installa sul disco fisso
-Name[ja]=ハードディスクへインストール
-Name[ko]=하드디스크에 인스톨하기
-Name[ky]=Катуу дискке орнотуу
-Name[nb]=Installer på harddisk
-Name[nl]=Installeer op de harde schijf
-Name[nn]=Installer på harddisken
-Name[pl]=Zainstaluj na dysku twardym
-Name[pt]=Instalar no Disco Rígido
-Name[pt_BR]=Instalar no Disco Rígido
-Name[ro]=Instalare pe discul dur
-Name[ru]=Установка на жёсткий диск
-Name[sk]=Inštalovať na hard disk
-Name[sl]=Namestitev na trdi disk
-Name[sq]=Instalo në Hard Disk
-Name[sv]=Installera på hårddisk
-Name[tr]=Sabit diske kur
-Name[uk]=Встановити на жорсткий диск
-Name[zh_CN]=安装到硬盘
-Name[zh_TW]=安裝在硬碟上
-Comment=Install your Mageia live system to disk
-Comment[ar]=تثبيت نظام ماجيا الحي على القرص الصلب
-Comment[ast]=Instalar el to sistema live de Mageia al discu
-Comment[ca]=Instal·la el sistema autònom de Mageia al disc
-Comment[cs]=Instalace vašeho živého systému Mageia na disk
-Comment[cy]=Gosod eich system Mageia fyw i'r disg
-Comment[de]=Installieren Sie Ihr Mageia-Livesystem auf der Festplatte
-Comment[el]=Εγκαταστήστε το σύστημά σας Mageia Live σ' ένα δίσκο
-Comment[en_GB]=Install your Mageia live system to disk
-Comment[es]=Instalar sistema live de Mageia en disco
-Comment[es_419]=Instalar tu sistema Mageia Live al disco
-Comment[et]=Mageia live-süsteemi paigaldamine kettale
-Comment[eu]=Zure Live Mageia sistema instalatu diskoan
-Comment[fi]=Asenna Mageia Live -järjestelmä kiintolevylle
-Comment[fr]=Installer votre système Mageia live sur le disque dur
-Comment[hr]=Instalirajte vaš Mageia live sustav na disk
-Comment[hu]=Mageia live rendszer telepítése a lemezre
-Comment[id]=Install sistem live Mageia Anda ke disk
-Comment[it]=Installa Mageia Live sul disco
-Comment[ja]=Mageia ライブシステムをディスクへインストール
-Comment[nl]=Het Mageia live systeem op de harde schijf installeren
-Comment[pl]=Zainstaluj system Mageia na dysku twardym
-Comment[pt]=Instalar o sistema Mageia 'Live' no disco
-Comment[pt_BR]=Instalar seu sistema Mageia live para o HD
-Comment[ro]=Instalați sistemul Mageia Live pe disc
-Comment[ru]=Установить Mageia LiveCD на жёсткий диск
-Comment[sk]=Inštalovať Mageia Live systém na disk
-Comment[sl]=Namestitev žive Mageje na trdi disk
-Comment[sq]=Instalo Sistemin Aktual Mageia në hard disk 
-Comment[sv]=Installera ditt Mageia live system till disk
-Comment[tr]=Mageia Çalışan CD sisteminizi diske yükleyin
-Comment[uk]=Встановити портативну систему Mageia на диск
-Comment[zh_CN]=将 Mageia live 系统安装到磁盘
-Comment[zh_TW]=將您的 Mageia live 系統安裝到硬碟
-Exec=/usr/bin/draklive-install
-Icon=draklive-install
-Terminal=false
-Type=Application
-Categories=GTK;X-Mageia-CrossDesktop;Settings;
diff --git a/files/WIP/org.mageia.draklive-install-lock-storage.policy b/files/WIP/org.mageia.draklive-install-lock-storage.policy
deleted file mode 100644
index a73282f..0000000
--- a/files/WIP/org.mageia.draklive-install-lock-storage.policy
+++ /dev/null
@@ -1,22 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE policyconfig PUBLIC
-"-//freedesktop//DTD PolicyKit Policy Configuration 1.0//EN"
-"http://www.freedesktop.org/standards/PolicyKit/1/policyconfig.dtd">
-<policyconfig>
-
- <vendor>Mageia</vendor>
- <vendor_url>http://www.mageia.org/</vendor_url>
-
- <action id="org.mageia.draklive-install-lock-storage.pkexec.run">
-    <description>Run draklive-install</description>
-    <message>Authentication is required to run Mageia Draklive Installer</message>
-    <icon_name>draklive-install</icon_name>
-    <defaults>
-     <allow_any>yes</allow_any>
-     <allow_inactive>no</allow_inactive>
-     <allow_active>yes</allow_active>
-    </defaults>
-    <annotate key="org.freedesktop.policykit.exec.path">/usr/sbin/draklive-install-lock-storage</annotate>
-    <annotate key="org.freedesktop.policykit.exec.allow_gui">true</annotate>
- </action>
-</policyconfig>
diff --git a/files/WIP/org.mageia.draklive-install.policy b/files/WIP/org.mageia.draklive-install.policy
deleted file mode 100644
index dccc272..0000000
--- a/files/WIP/org.mageia.draklive-install.policy
+++ /dev/null
@@ -1,22 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE policyconfig PUBLIC
-"-//freedesktop//DTD PolicyKit Policy Configuration 1.0//EN"
-"http://www.freedesktop.org/standards/PolicyKit/1/policyconfig.dtd">
-<policyconfig>
-
- <vendor>Mageia</vendor>
- <vendor_url>http://www.mageia.org/</vendor_url>
-
- <action id="org.mageia.draklive-install.pkexec.run">
-    <description>Run draklive-install</description>
-    <message>Authentication is required to run Mageia Draklive Installer</message>
-    <icon_name>draklive-install</icon_name>
-    <defaults>
-     <allow_any>yes</allow_any>
-     <allow_inactive>no</allow_inactive>
-     <allow_active>yes</allow_active>
-    </defaults>
-    <annotate key="org.freedesktop.policykit.exec.path">/usr/sbin/draklive-install</annotate>
-    <annotate key="org.freedesktop.policykit.exec.allow_gui">true</annotate>
- </action>
-</policyconfig>