path: root/donate

# DrakX messages for zh_CN locale
# Copyright (C) 1999 Free Software Foundation, Inc.
# Copyright (c) 1999 MandrakeSoft
#
# Jesse Kuang <kjx@mandrakesoft.com>
# DU Xiaoming <dxiaoming@mandrakesoft.com>, 2001
#
# Earlier translater:
# Danny Zeng <zeng@synopsys.com>, 2000
#
# Earlier translaters:
# Cheng Yuan-Chung <platin@ms31.hinet.net>, 1999
# <c17@acer.17.o3.net>, 1999
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
"POT-Creation-Date: 2001-09-21 19:50+0200\n"
"PO-Revision-Date: 2001-09-27 13:29+0800\n"
"Last-Translator: Jesse Kuang <kjx@mandrakesoft.com>\n"
"Language-Team: future-cjk <future-cjk@mandrakesoft.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=gb2312\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../../Xconfigurator.pm_.c:231
msgid "Configure all heads independently"
msgstr "配置所有显示器"

#: ../../Xconfigurator.pm_.c:232
msgid "Use Xinerama extension"
msgstr "使用 Xinerama 扩展"

#: ../../Xconfigurator.pm_.c:235
#, c-format
msgid "Configure only card \"%s\" (%s)"
msgstr "配置显卡 \"%s\" (%s)"

#: ../../Xconfigurator.pm_.c:238
msgid "Multi-head configuration"
msgstr "多显示器配置"

#: ../../Xconfigurator.pm_.c:239
msgid ""
"Your system support multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"您的系统支持多显示器.\n"
"是否配置?"

#: ../../Xconfigurator.pm_.c:248
msgid "Graphic card"
msgstr "显示卡"

#: ../../Xconfigurator.pm_.c:248
msgid "Select a graphic card"
msgstr "选择一种显示卡"

#: ../../Xconfigurator.pm_.c:249
msgid "Choose a X server"
msgstr "选择一种 X 服务器"

#: ../../Xconfigurator.pm_.c:249
msgid "X server"
msgstr "X 服务器"

#: ../../Xconfigurator.pm_.c:307
#: ../../Xconfigurator.pm_.c:313
#: ../../Xconfigurator.pm_.c:363
#: ../../Xconfigurator.pm_.c:1435
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: ../../Xconfigurator.pm_.c:310
msgid "Which configuration of XFree do you want to have?"
msgstr "您希望拥有哪个 XFree 配置?"

#: ../../Xconfigurator.pm_.c:321
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"只有使用 XFree %s, 您的显示卡才可以得到 3D 硬件加速支持.\n"
"XFree %s 支持您的显示卡, 它能提供更好的 2D 支持."

#: ../../Xconfigurator.pm_.c:323
#: ../../Xconfigurator.pm_.c:356
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "使用 XFree %s, 您的显示卡可以得到 3D 硬件加速支持."

#: ../../Xconfigurator.pm_.c:325
#: ../../Xconfigurator.pm_.c:358
#: ../../Xconfigurator.pm_.c:1435
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s 带有硬件 3D 加速的支持"

#: ../../Xconfigurator.pm_.c:333
#: ../../Xconfigurator.pm_.c:347
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"使用 XFree %s, 您的显示卡可以得到 3D 硬件加速支持.\n"
"注意这是试验阶段的支持, 它可能会使您的电脑失去反应."

#: ../../Xconfigurator.pm_.c:335
#: ../../Xconfigurator.pm_.c:349
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s 带有试验阶段的3D硬件加速支持"

#: ../../Xconfigurator.pm_.c:344
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"只有使用 XFree %s, 您的显示卡才可以得到 3D 硬件加速支持.\n"
"注意这是试验阶段的支持, 它可能会使您的电脑失去反应\n"
"XFree %s 支持您的显示卡, 它能提供更好的 2D 支持."

#: ../../Xconfigurator.pm_.c:364
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (安装显卡驱动)"

#: ../../Xconfigurator.pm_.c:368
msgid "XFree configuration"
msgstr "XFree 配置"

#: ../../Xconfigurator.pm_.c:434
msgid "Select the memory size of your graphic card"
msgstr "选定显示卡上存储器的大小"

#: ../../Xconfigurator.pm_.c:492
msgid "Choose options for server"
msgstr "选择 X 服务器的参数"

#: ../../Xconfigurator.pm_.c:516
msgid "Choose a monitor"
msgstr "选择一种显示器"

#: ../../Xconfigurator.pm_.c:516
msgid "Monitor"
msgstr "显示器"

#: ../../Xconfigurator.pm_.c:519
msgid ""
"The two critical parameters are the vertical refresh rate, which is the rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync range\n"
"that is beyond the capabilities of your monitor: you may damage your monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"有两个关键的参数:\n"
"垂直更新频率, 设定整个屏幕每秒钟更新的次数;\n"
"水平更新频率, 这个特别重要, 设定了显示扫描线的速率.\n"
"\n"
"千万小心! 不要把这些同步范围设定得超过您的显示器的能力.\n"
"如果您搞错, 显示器会坏掉!\n"
"所以没把握时, 请选择保守的设定."

#: ../../Xconfigurator.pm_.c:526
msgid "Horizontal refresh rate"
msgstr "水平更新频率"

#: ../../Xconfigurator.pm_.c:527
msgid "Vertical refresh rate"
msgstr "垂直更新频率"

#: ../../Xconfigurator.pm_.c:564
msgid "Monitor not configured"
msgstr "尚未完成显示器设定"

#: ../../Xconfigurator.pm_.c:567
msgid "Graphic card not configured yet"
msgstr "尚未完成显示卡设定"

#: ../../Xconfigurator.pm_.c:570
msgid "Resolutions not chosen yet"
msgstr "尚未选取要使用的解析度"

#: ../../Xconfigurator.pm_.c:587
msgid "Do you want to test the configuration?"
msgstr "您想要测试您的设定值吗 ?"

#: ../../Xconfigurator.pm_.c:591
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "小心! 测试这张显示卡可能会锁定您的电脑"

#: ../../Xconfigurator.pm_.c:594
msgid "Test of the configuration"
msgstr "测试设定值"

#: ../../Xconfigurator.pm_.c:632
#: ../../Xconfigurator.pm_.c:644
msgid ""
"\n"
"try to change some parameters"
msgstr ""
"\n"
"尝试改变一些参数"

#: ../../Xconfigurator.pm_.c:632
#: ../../Xconfigurator.pm_.c:644
msgid "An error has occurred:"
msgstr "发生错误∶"

#: ../../Xconfigurator.pm_.c:668
#, c-format
msgid "Leaving in %d seconds"
msgstr "(在 %d 秒钟后离开)"

#: ../../Xconfigurator.pm_.c:679
msgid "Is this the correct setting?"
msgstr "这样设定正确吗?"

#: ../../Xconfigurator.pm_.c:688
msgid "An error has occurred, try to change some parameters"
msgstr "发生错误，请试着更改一些参数的设定值"

#: ../../Xconfigurator.pm_.c:759
msgid "Resolution"
msgstr "解析度"

#: ../../Xconfigurator.pm_.c:810
msgid "Choose the resolution and the color depth"
msgstr "选取解析度以及颜色深度"

#: ../../Xconfigurator.pm_.c:812
#, c-format
msgid "Graphic card: %s"
msgstr "显示卡: %s"

#: ../../Xconfigurator.pm_.c:813
#, c-format
msgid "XFree86 server: %s"
msgstr "XFree86 服务器: %s"

#: ../../Xconfigurator.pm_.c:829
#: ../../printerdrake.pm_.c:1885
#: ../../standalone/draknet_.c:298
#: ../../standalone/draknet_.c:301
msgid "Expert Mode"
msgstr "专家模式"

#: ../../Xconfigurator.pm_.c:830
msgid "Show all"
msgstr "显示全部"

#: ../../Xconfigurator.pm_.c:875
msgid "Resolutions"
msgstr "解析度"

#: ../../Xconfigurator.pm_.c:1437
#, c-format
msgid ""
"Keyboard layout: %s\n"
""
msgstr ""
"键盘的布局: %s\n"
""

#: ../../Xconfigurator.pm_.c:1438
#, c-format
msgid ""
"Mouse type: %s\n"
""
msgstr ""
"鼠标类型: %s\n"
""

#: ../../Xconfigurator.pm_.c:1439
#, c-format
msgid ""
"Mouse device: %s\n"
""
msgstr ""
"鼠标连接设备: %s\n"
""

#: ../../Xconfigurator.pm_.c:1440
#, c-format
msgid ""
"Monitor: %s\n"
""
msgstr ""
"显示器: %s\n"
""

#: ../../Xconfigurator.pm_.c:1441
#, c-format
msgid ""
"Monitor HorizSync: %s\n"
""
msgstr ""
"显示器水平更新频率: %s\n"
""

#: ../../Xconfigurator.pm_.c:1442
#, c-format
msgid ""
"Monitor VertRefresh: %s\n"
""
msgstr ""
"显示器垂直更新频率: %s\n"
""

#: ../../Xconfigurator.pm_.c:1443
#, c-format
msgid ""
"Graphic card: %s\n"
""
msgstr ""
"显示卡: %s\n"
""

#: ../../Xconfigurator.pm_.c:1444
#, c-format
msgid ""
"Graphic card identification: %s\n"
""
msgstr ""
"显示卡: %s\n"
""

#: ../../Xconfigurator.pm_.c:1445
#, c-format
msgid ""
"Graphic memory: %s kB\n"
""
msgstr ""
"图形存储器: %s kB\n"
""

#: ../../Xconfigurator.pm_.c:1447
#, c-format
msgid ""
"Color depth: %s\n"
""
msgstr ""
"彩色深度: %s\n"
""

#: ../../Xconfigurator.pm_.c:1448
#, c-format
msgid ""
"Resolution: %s\n"
""
msgstr ""
"解析度: %s\n"
""

#: ../../Xconfigurator.pm_.c:1450
#, c-format
msgid ""
"XFree86 server: %s\n"
""
msgstr ""
"XFree86 服务器: %s\n"
""

#: ../../Xconfigurator.pm_.c:1451
#, c-format
msgid ""
"XFree86 driver: %s\n"
""
msgstr ""
"XFree86 驱动程序: %s\n"
""

#: ../../Xconfigurator.pm_.c:1469
msgid "Preparing X-Window configuration"
msgstr "正在准备 X-Window 的设定"

#: ../../Xconfigurator.pm_.c:1489
msgid "What do you want to do?"
msgstr "您打算怎么作 ?"

#: ../../Xconfigurator.pm_.c:1494
msgid "Change Monitor"
msgstr "改变显示器设定"

#: ../../Xconfigurator.pm_.c:1495
msgid "Change Graphic card"
msgstr "改变显示卡"

#: ../../Xconfigurator.pm_.c:1497
msgid "Change Server options"
msgstr "改变服务器程序的参数"

#: ../../Xconfigurator.pm_.c:1498
msgid "Change Resolution"
msgstr "改变解析度"

#: ../../Xconfigurator.pm_.c:1499
msgid "Show information"
msgstr "显示所有信息"

#: ../../Xconfigurator.pm_.c:1500
msgid "Test again"
msgstr "再次测试设定值"

#: ../../Xconfigurator.pm_.c:1501
#: ../../bootlook.pm_.c:156
msgid "Quit"
msgstr "结束"

#: ../../Xconfigurator.pm_.c:1509
#, c-format
msgid ""
"Keep the changes?\n"
"Current configuration is:\n"
"\n"
"%s"
msgstr ""
"保存修改?\n"
"当前配置是:\n"
"\n"
"%s"

#: ../../Xconfigurator.pm_.c:1532
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "请重新登录到 %s 使您所做的更改生效"

#: ../../Xconfigurator.pm_.c:1552
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "请退出, 然后同时按 Ctrl-Alt-BackSpace"

#: ../../Xconfigurator.pm_.c:1555
msgid "X at startup"
msgstr "开机时启动 X"

#: ../../Xconfigurator.pm_.c:1556
msgid ""
"I can set up your computer to automatically start X upon booting.\n"
"Would you like X to start when you reboot?"
msgstr ""
"我可以帮您设定在开机时自动启动 X，\n"
"您希望在重新开机以后就自动进入 X 吗 ?"

#: ../../Xconfigurator_consts.pm_.c:6
msgid "256 colors (8 bits)"
msgstr "256 色 (8 位元)"

#: ../../Xconfigurator_consts.pm_.c:7
msgid "32 thousand colors (15 bits)"
msgstr "3 万 2 千色 (15 位元)"

#: ../../Xconfigurator_consts.pm_.c:8
msgid "65 thousand colors (16 bits)"
msgstr "6 万 5 千色 (16 位元)"

#: ../../Xconfigurator_consts.pm_.c:9
msgid "16 million colors (24 bits)"
msgstr "1 千 6 百万色 (24 位元)"

#: ../../Xconfigurator_consts.pm_.c:10
msgid "4 billion colors (32 bits)"
msgstr "4 亿色 (32 位元)"

#: ../../Xconfigurator_consts.pm_.c:106
msgid "256 kB"
msgstr "256 kB"

#: ../../Xconfigurator_consts.pm_.c:107
msgid "512 kB"
msgstr "512 kB"

#: ../../Xconfigurator_consts.pm_.c:108
msgid "1 MB"
msgstr "1 MB"

#: ../../Xconfigurator_consts.pm_.c:109
msgid "2 MB"
msgstr "2 MB"

#: ../../Xconfigurator_consts.pm_.c:110
msgid "4 MB"
msgstr "4 MB"

#: ../../Xconfigurator_consts.pm_.c:111
msgid "8 MB"
msgstr "8 MB"

#: ../../Xconfigurator_consts.pm_.c:112
msgid "16 MB"
msgstr "16 MB"

#: ../../Xconfigurator_consts.pm_.c:113
msgid "32 MB"
msgstr "32 MB"

#: ../../Xconfigurator_consts.pm_.c:114
msgid "64 MB or more"
msgstr "64 MB 或以上"

#: ../../Xconfigurator_consts.pm_.c:122
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr "标准 VGA 模式, 640x480 at 60 Hz"

#: ../../Xconfigurator_consts.pm_.c:123
msgid "Super VGA, 800x600 at 56 Hz"
msgstr "Super VGA, 800x600 at 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:124
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr "8514 相容模式, 1024x768 at 87 Hz 隔行扫描 (no 800x600)"

#: ../../Xconfigurator_consts.pm_.c:125
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr "Super VGA, 1024x768 at 87 Hz 隔行扫描, 800x600 at 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:126
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr "扩展 Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:127
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr "逐行扫描 SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:128
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr "高频率 SVGA, 1024x768 at 70 Hz"

#: ../../Xconfigurator_consts.pm_.c:129
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr "多频率, 最高达 1280x1024 at 60 Hz"

#: ../../Xconfigurator_consts.pm_.c:130
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr "多频率, 最高达  1280x1024 at 74 Hz"

#: ../../Xconfigurator_consts.pm_.c:131
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr "多频率, 最高达 1280x1024 at 76 Hz"

#: ../../Xconfigurator_consts.pm_.c:132
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr "您的显示器可使用 1600x1200 at 70 Hz"

#: ../../Xconfigurator_consts.pm_.c:133
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr "您的显示器可使用 1600x1200 at 76 Hz"

#: ../../any.pm_.c:96
#: ../../any.pm_.c:121
msgid "First sector of boot partition"
msgstr "开机分区的第一扇区"

#: ../../any.pm_.c:96
#: ../../any.pm_.c:121
#: ../../any.pm_.c:194
msgid "First sector of drive (MBR)"
msgstr "硬盘的主引导区 (MBR)"

#: ../../any.pm_.c:100
msgid "SILO Installation"
msgstr "SILO 安装"

#: ../../any.pm_.c:101
#: ../../any.pm_.c:114
msgid "Where do you want to install the bootloader?"
msgstr "在哪里安装开机引导程序 ?"

#: ../../any.pm_.c:113
msgid "LILO/grub Installation"
msgstr "LILO/grub 安装"

#: ../../any.pm_.c:125
#: ../../any.pm_.c:139
msgid "SILO"
msgstr "SILO"

#: ../../any.pm_.c:127
msgid "LILO with text menu"
msgstr "文本菜单 LILO"

#: ../../any.pm_.c:128
#: ../../any.pm_.c:139
msgid "LILO with graphical menu"
msgstr "图形菜单 LILO"

#: ../../any.pm_.c:131
msgid "Grub"
msgstr "Grub"

#: ../../any.pm_.c:135
msgid "Boot from DOS/Windows (loadlin)"
msgstr "从DOS/Windows启动"

#: ../../any.pm_.c:137
#: ../../any.pm_.c:139
msgid "Yaboot"
msgstr "根分区"

#: ../../any.pm_.c:145
#: ../../any.pm_.c:177
msgid "Bootloader main options"
msgstr "开机引导程序的主要选项"

#: ../../any.pm_.c:146
#: ../../any.pm_.c:178
msgid "Bootloader to use"
msgstr "将使用的开机引导程序"

#: ../../any.pm_.c:148
msgid "Bootloader installation"
msgstr "开机引导程序安装"

#: ../../any.pm_.c:150
#: ../../any.pm_.c:180
msgid "Boot device"
msgstr "开机引导设备"

#: ../../any.pm_.c:151
msgid "LBA (doesn't work on old BIOSes)"
msgstr "LBA (在老旧的 BIOS 上不能工作)"

#: ../../any.pm_.c:152
msgid "Compact"
msgstr "紧凑"

#: ../../any.pm_.c:152
msgid "compact"
msgstr "紧凑"

#: ../../any.pm_.c:153
#: ../../any.pm_.c:250
msgid "Video mode"
msgstr "显示模式"

#: ../../any.pm_.c:155
msgid "Delay before booting default image"
msgstr "开机等候时间"

#: ../../any.pm_.c:157
#: ../../any.pm_.c:730
#: ../../install_steps_interactive.pm_.c:938
#: ../../network/modem.pm_.c:46
#: ../../printerdrake.pm_.c:402
#: ../../printerdrake.pm_.c:481
#: ../../standalone/draknet_.c:603
msgid "Password"
msgstr "口令"

#: ../../any.pm_.c:158
#: ../../any.pm_.c:731
#: ../../install_steps_interactive.pm_.c:939
msgid "Password (again)"
msgstr "口令 (再一次)"

#: ../../any.pm_.c:159
msgid "Restrict command line options"
msgstr "限制命令行选项"

#: ../../any.pm_.c:159
msgid "restrict"
msgstr "限制"

#: ../../any.pm_.c:161
msgid "Clean /tmp at each boot"
msgstr "每次开机时清除 /tmp"

#: ../../any.pm_.c:162
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "精确的存储器大小 (找到 %dMB)"

#: ../../any.pm_.c:164
msgid "Enable multi profiles"
msgstr "运行多种配置"

#: ../../any.pm_.c:168
msgid "Give the ram size in MB"
msgstr "告诉我有多少 Mb 的内存"

#: ../../any.pm_.c:170
msgid "Option ``Restrict command line options'' is of no use without a password"
msgstr "没有口令不能使用 ``限定参数选项''"

#: ../../any.pm_.c:171
#: ../../any.pm_.c:707
#: ../../install_steps_interactive.pm_.c:933
msgid "Please try again"
msgstr "请再试一次"

#: ../../any.pm_.c:171
#: ../../any.pm_.c:707
#: ../../install_steps_interactive.pm_.c:933
msgid "The passwords do not match"
msgstr "两次口令不符"

#: ../../any.pm_.c:179
msgid "Init Message"
msgstr "初始信息"

#: ../../any.pm_.c:181
msgid "Open Firmware Delay"
msgstr "固件延迟"

#: ../../any.pm_.c:182
msgid "Kernel Boot Timeout"
msgstr "核心启动超时"

#: ../../any.pm_.c:183
msgid "Enable CD Boot?"
msgstr "CD 启动?"

#: ../../any.pm_.c:184
msgid "Enable OF Boot?"
msgstr "OF 启动?"

#: ../../any.pm_.c:185
msgid "Default OS?"
msgstr "缺省操作系统?"

#: ../../any.pm_.c:207
msgid ""
"Here are the different entries.\n"
"You can add some more or change the existing ones."
msgstr ""
"现在有下列条目.\n"
"您可以增加或是更改已存在的条目"

#: ../../any.pm_.c:217
msgid "Add"
msgstr "增加"

#: ../../any.pm_.c:217
#: ../../any.pm_.c:718
#: ../../diskdrake.pm_.c:161
#: ../../interactive_http.pm_.c:153
#: ../../printerdrake.pm_.c:1846
#: ../../printerdrake.pm_.c:1847
#: ../../printerdrake.pm_.c:1904
#: ../../printerdrake.pm_.c:1948
msgid "Done"
msgstr "完成"

#: ../../any.pm_.c:217
msgid "Modify"
msgstr "修改"

#: ../../any.pm_.c:225
msgid "Which type of entry do you want to add?"
msgstr "要增加的条目是什么类型?"

#: ../../any.pm_.c:226
msgid "Linux"
msgstr "Linux"

#: ../../any.pm_.c:226
msgid "Other OS (SunOS...)"
msgstr "其他操作系统 (SunOS...)"

#: ../../any.pm_.c:227
msgid "Other OS (MacOS...)"
msgstr "其他操作系统 (MacOS...)"

#: ../../any.pm_.c:227
msgid "Other OS (windows...)"
msgstr "其他操作系统 (windows...)"

#: ../../any.pm_.c:246
msgid "Image"
msgstr "映象文件"

#: ../../any.pm_.c:247
#: ../../any.pm_.c:258
msgid "Root"
msgstr "根分区"

#: ../../any.pm_.c:248
#: ../../any.pm_.c:277
msgid "Append"
msgstr "增加"

#: ../../any.pm_.c:252
msgid "Initrd"
msgstr "Initrd"

#: ../../any.pm_.c:253
msgid "Read-write"
msgstr "可读写"

#: ../../any.pm_.c:260
msgid "Table"
msgstr "表格"

#: ../../any.pm_.c:261
msgid "Unsafe"
msgstr "不安全"

#: ../../any.pm_.c:268
#: ../../any.pm_.c:273
#: ../../any.pm_.c:276
msgid "Label"
msgstr "标签"

#: ../../any.pm_.c:270
#: ../../any.pm_.c:281
msgid "Default"
msgstr "缺省"

#: ../../any.pm_.c:278
msgid "Initrd-size"
msgstr "Initrd大小"

#: ../../any.pm_.c:280
msgid "NoVideo"
msgstr "无视频"

#: ../../any.pm_.c:288
msgid "Remove entry"
msgstr "删除条目"

#: ../../any.pm_.c:291
msgid "Empty label not allowed"
msgstr "标签不能为空"

#: ../../any.pm_.c:292
msgid "This label is already used"
msgstr "这个标记已经被使用"

#: ../../any.pm_.c:597
#, c-format
msgid "Found %s %s interfaces"
msgstr "找到 %s %s 接口"

#: ../../any.pm_.c:598
msgid "Do you have another one?"
msgstr "您有其他的吗 ?"

#: ../../any.pm_.c:599
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "您还有其他 %s 接口吗 ?"

#: ../../any.pm_.c:601
#: ../../any.pm_.c:760
#: ../../interactive.pm_.c:112
#: ../../my_gtk.pm_.c:715
msgid "No"
msgstr "否"

#: ../../any.pm_.c:601
#: ../../any.pm_.c:759
#: ../../interactive.pm_.c:112
#: ../../my_gtk.pm_.c:715
msgid "Yes"
msgstr "是"

#: ../../any.pm_.c:602
msgid "See hardware info"
msgstr "请看硬体信息"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../any.pm_.c:637
#, c-format
msgid "Installing driver for %s card %s"
msgstr "正在安装 %s 卡 %s 的驱动程序"

#: ../../any.pm_.c:638
#, c-format
msgid "(module %s)"
msgstr "(模块 %s)"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../any.pm_.c:649
#, c-format
msgid "Which %s driver should I try?"
msgstr "我该试用那个 %s 驱动程序 ?"

#: ../../any.pm_.c:657
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it should\n"
"not cause any damage."
msgstr ""
"有时候需要给 %s 驱动程序指定额外的信息才能正常运行, 尽管通常不需要.\n"
"您可以在这里指定一些额外的选项, 也可以让驱动程序探测您的机器, 自动\n"
"确定需要的信息. 偶尔会发生机器在探测中停止反应, 不过这不会损坏什么. \n"
"您决定怎样?"

#: ../../any.pm_.c:662
msgid "Autoprobe"
msgstr "自动探测"

#: ../../any.pm_.c:662
msgid "Specify options"
msgstr "指定参数"

#: ../../any.pm_.c:666
#, c-format
msgid "You may now provide its options to module %s."
msgstr "请指定模块 %s 的参数"

#: ../../any.pm_.c:672
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"现在给模块 %s 指定它的选项. \n"
"选项的格式是 ``name=value name2=value2...'' \n"
"例如， ``io=0x300 irq=7''"

#: ../../any.pm_.c:675
msgid "Module options:"
msgstr "模块参数"

#: ../../any.pm_.c:686
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"模块 %s 加载失败.\n"
"您要尝试其他的参数吗 ?"

#: ../../any.pm_.c:704
#, c-format
msgid "(already added %s)"
msgstr "(已经增加了 %s)"

#: ../../any.pm_.c:708
msgid "This password is too simple"
msgstr "口令太简单"

#: ../../any.pm_.c:709
msgid "Please give a user name"
msgstr "请给出有关用户名"

#: ../../any.pm_.c:710
msgid "The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "用户名称只能有小写字母、数字，`-' 和 `_'"

#: ../../any.pm_.c:711
msgid "This user name is already added"
msgstr "这个用户名称已经有了"

#: ../../any.pm_.c:715
msgid "Add user"
msgstr "增加用户"

#: ../../any.pm_.c:716
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"请输入一个用户\n"
"%s"

#: ../../any.pm_.c:717
msgid "Accept user"
msgstr "接受用户"

#: ../../any.pm_.c:728
msgid "Real name"
msgstr "真实姓名"

#: ../../any.pm_.c:729
#: ../../printerdrake.pm_.c:401
#: ../../printerdrake.pm_.c:480
msgid "User name"
msgstr "用户名"

#: ../../any.pm_.c:732
msgid "Shell"
msgstr "Shell"

#: ../../any.pm_.c:734
msgid "Icon"
msgstr "图标"

#: ../../any.pm_.c:756
msgid "Autologin"
msgstr "自动登录"

#: ../../any.pm_.c:757
msgid ""
"I can set up your computer to automatically log on one user.\n"
"Do you want to use this feature?"
msgstr ""
"我可以帮您设定在开机时自动录入用户\n"
"您希望使用这个特性吗 ?"

#: ../../any.pm_.c:761
msgid "Choose the default user:"
msgstr "选择缺省的用户:"

#: ../../any.pm_.c:762
msgid "Choose the window manager to run:"
msgstr "选择要运行的窗口管理程序:"

#: ../../any.pm_.c:771
msgid "Please, choose a language to use."
msgstr "请选择一种要使用的语言."

#: ../../any.pm_.c:773
msgid "You can choose other languages that will be available after install"
msgstr "您可以在安装之后选择其他可用的语言"

#: ../../any.pm_.c:785
#: ../../install_steps_interactive.pm_.c:633
msgid "All"
msgstr "全部"

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
# 
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm_.c:259
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system in the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
""
msgstr ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system in the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
""

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
# and only one line per string for the GRUB messages
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:835
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Welcome to GRUB the operating system chooser!"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:838
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Use the %c and %c keys for selecting which entry is highlighted."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:841
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "Press enter to boot the selected OS, 'e' to edit the"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:844
msgid "commands before booting, or 'c' for a command-line."
msgstr "commands before booting, or 'c' for a command-line."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:847
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "The highlighted entry will be booted automatically in %d seconds."

#: ../../bootloader.pm_.c:851
msgid "not enough room in /boot"
msgstr " /boot 中没有足够空间"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
#: ../../bootloader.pm_.c:951
msgid "Desktop"
msgstr "桌面"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#: ../../bootloader.pm_.c:953
msgid "Start Menu"
msgstr "开始菜单"

#: ../../bootloader.pm_.c:972
#, c-format
msgid ""
"You can't install the bootloader on a %s partition\n"
""
msgstr ""
"%s 分区不能安装开机引导程序\n"
""

#: ../../bootlook.pm_.c:46
msgid ""
"no help implemented yet.\n"
""
msgstr ""
"帮助功能未实现.\n"
""

#: ../../bootlook.pm_.c:62
msgid "Boot Style Configuration"
msgstr "启动配置"

#: ../../bootlook.pm_.c:79
msgid "/_File"
msgstr "/_F文件"

#: ../../bootlook.pm_.c:80
msgid "/File/_Quit"
msgstr "/文件/_Q退出"

#: ../../bootlook.pm_.c:80
msgid "<control>Q"
msgstr "<控制>Q"

#: ../../bootlook.pm_.c:91
msgid "NewStyle Categorizing Monitor"
msgstr "新型显示器"

#: ../../bootlook.pm_.c:92
msgid "NewStyle Monitor"
msgstr "新型显示器"

#: ../../bootlook.pm_.c:93
msgid "Traditional Monitor"
msgstr "传统显示器"

#: ../../bootlook.pm_.c:94
msgid "Traditional Gtk+ Monitor"
msgstr "传统Gtk+显示器"

#: ../../bootlook.pm_.c:95
msgid "Launch Aurora at boot time"
msgstr "启动时运行Aurora"

#: ../../bootlook.pm_.c:100
msgid "Lilo/grub mode"
msgstr "Lilo/grub模式"

#: ../../bootlook.pm_.c:102
#, c-format
msgid ""
"You are currently using %s as Boot Manager.\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"你目前使用 %s 作为开机程序管理器.\n"
"点击''配置''运行配置精灵."

#: ../../bootlook.pm_.c:104
#: ../../standalone/drakgw_.c:643
#: ../../standalone/draknet_.c:280
#: ../../standalone/tinyfirewall_.c:57
msgid "Configure"
msgstr "配置"

#: ../../bootlook.pm_.c:108
msgid "Boot mode"
msgstr "开机引导模式"

#: ../../bootlook.pm_.c:136
msgid "System mode"
msgstr "系统模式"

#: ../../bootlook.pm_.c:138
msgid "Launch the X-Window system at start"
msgstr "启动时运行X窗口"

#: ../../bootlook.pm_.c:143
msgid "No, I don't want autologin"
msgstr "不，不要自动录入"

#: ../../bootlook.pm_.c:145
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "是, 以(用户,桌面)录入"

#: ../../bootlook.pm_.c:155
#: ../../standalone/draknet_.c:108
#: ../../standalone/draknet_.c:140
#: ../../standalone/draknet_.c:208
#: ../../standalone/draknet_.c:320
#: ../../standalone/draknet_.c:433
#: ../../standalone/draknet_.c:507
#: ../../standalone/draknet_.c:543
#: ../../standalone/draknet_.c:644
msgid "OK"
msgstr "确定"

#: ../../bootlook.pm_.c:156
#: ../../install_steps_gtk.pm_.c:516
#: ../../interactive.pm_.c:122
#: ../../interactive.pm_.c:286
#: ../../interactive.pm_.c:308
#: ../../interactive_stdio.pm_.c:27
#: ../../my_gtk.pm_.c:416
#: ../../my_gtk.pm_.c:419
#: ../../my_gtk.pm_.c:716
#: ../../printerdrake.pm_.c:1158
#: ../../standalone/drakgw_.c:648
#: ../../standalone/draknet_.c:115
#: ../../standalone/draknet_.c:147
#: ../../standalone/draknet_.c:313
#: ../../standalone/draknet_.c:519
#: ../../standalone/draknet_.c:658
#: ../../standalone/tinyfirewall_.c:63
msgid "Cancel"
msgstr "取消"

#: ../../bootlook.pm_.c:224
#, c-format
msgid "can not open /etc/inittab for reading: %s"
msgstr "无法打开 /etc/inittab 读: %s"

#: ../../bootlook.pm_.c:336
#: ../../standalone/drakboot_.c:47
msgid "Installation of LILO failed. The following error occured:"
msgstr "安装 LILO 失败，出现下列错误:"

#: ../../common.pm_.c:93
msgid "GB"
msgstr "GB"

#: ../../common.pm_.c:93
msgid "KB"
msgstr "KB"

#: ../../common.pm_.c:93
#: ../../install_steps_graphical.pm_.c:287
#: ../../install_steps_graphical.pm_.c:334
msgid "MB"
msgstr "MB"

#: ../../common.pm_.c:101
msgid "TB"
msgstr "TB"

#: ../../common.pm_.c:109
#, c-format
msgid "%d minutes"
msgstr "%d 分钟"

#: ../../common.pm_.c:111
msgid "1 minute"
msgstr "1 分钟"

#: ../../common.pm_.c:113
#, c-format
msgid "%d seconds"
msgstr " %d 秒钟"

#: ../../diskdrake.pm_.c:100
msgid "Please make a backup of your data first"
msgstr "请先备份您的数据"

#: ../../diskdrake.pm_.c:100
#: ../../diskdrake_interactive.pm_.c:801
#: ../../diskdrake_interactive.pm_.c:810
#: ../../diskdrake_interactive.pm_.c:864
msgid "Read carefully!"
msgstr "请仔细阅读!!"

#: ../../diskdrake.pm_.c:103
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)\n"
"at the beginning of the disk"
msgstr ""
"如果您计划采用 aboot, 请注意在磁盘的开头位置留下一段自由空间\n"
"( 2048 扇区就足够了)"

#: ../../diskdrake.pm_.c:122
#: ../../diskdrake_interactive.pm_.c:313
#: ../../diskdrake_interactive.pm_.c:328
#: ../../install_steps.pm_.c:72
#: ../../install_steps_interactive.pm_.c:37
#: ../../install_steps_interactive.pm_.c:310
#: ../../interactive_http.pm_.c:119
#: ../../interactive_http.pm_.c:120
#: ../../standalone/diskdrake_.c:62
msgid "Error"
msgstr "错误"

#: ../../diskdrake.pm_.c:159
msgid "Wizard"
msgstr "法师"

#: ../../diskdrake.pm_.c:181
msgid "New"
msgstr "新建"

#: ../../diskdrake.pm_.c:203
#: ../../diskdrake.pm_.c:206
msgid "Remote"
msgstr "远端"

#: ../../diskdrake.pm_.c:208
#: ../../diskdrake.pm_.c:479
#: ../../diskdrake_interactive.pm_.c:352
#: ../../diskdrake_interactive.pm_.c:523
msgid "Mount point"
msgstr "装载点"

#: ../../diskdrake.pm_.c:209
msgid "Options"
msgstr "选项"

#: ../../diskdrake.pm_.c:211
#: ../../diskdrake.pm_.c:417
#: ../../diskdrake.pm_.c:534
#: ../../diskdrake_interactive.pm_.c:353
#: ../../diskdrake_interactive.pm_.c:488
msgid "Type"
msgstr "类型"

#: ../../diskdrake.pm_.c:223
#: ../../diskdrake_interactive.pm_.c:361
msgid "Unmount"
msgstr "卸载"

#: ../../diskdrake.pm_.c:224
#: ../../diskdrake_interactive.pm_.c:357
msgid "Mount"
msgstr "装载"

#: ../../diskdrake.pm_.c:228
msgid "Choose action"
msgstr "选择操作"

#: ../../diskdrake.pm_.c:235
msgid ""
"You have one big FAT partition\n"
"(generally used by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"您有一个很大的 FAT 分区，\n"
"(通常是 Microsoft Dos/Windows 占用的).\n"
"建议您先重设这个分区的大小\n"
"(点中它，然后按 \"改变大小\")"

#: ../../diskdrake.pm_.c:238
msgid "Please click on a partition"
msgstr "请选中一个分区"

#: ../../diskdrake.pm_.c:240
msgid "Please click on a media"
msgstr "请选中一个介质"

#: ../../diskdrake.pm_.c:243
msgid ""
"Please click on a button above\n"
"\n"
"Or use \"New\""
msgstr ""
"请点击以上的按钮\n"
"\n"
"或使用 \"新建\""

#: ../../diskdrake.pm_.c:244
msgid "Use \"New\""
msgstr "使用 \"新建\""

#: ../../diskdrake.pm_.c:263
#: ../../install_steps_gtk.pm_.c:517
msgid "Details"
msgstr "详细情况"

#: ../../diskdrake.pm_.c:395
msgid "Ext2"
msgstr "Ext2"

#: ../../diskdrake.pm_.c:395
msgid "FAT"
msgstr "FAT"

#: ../../diskdrake.pm_.c:395
msgid "HFS"
msgstr "HFS"

#: ../../diskdrake.pm_.c:395
msgid "Journalised FS"
msgstr "日志文件系统"

#: ../../diskdrake.pm_.c:395
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake.pm_.c:395
msgid "Swap"
msgstr "Swap"

#: ../../diskdrake.pm_.c:396
#: ../../diskdrake_interactive.pm_.c:952
msgid "Empty"
msgstr "空"

#: ../../diskdrake.pm_.c:396
#: ../../install_steps_gtk.pm_.c:373
#: ../../install_steps_gtk.pm_.c:433
#: ../../mouse.pm_.c:161
#: ../../services.pm_.c:161
msgid "Other"
msgstr "其他"

#: ../../diskdrake.pm_.c:400
msgid "Filesystem types:"
msgstr "文件系统类型:"

#: ../../diskdrake.pm_.c:417
#: ../../diskdrake_interactive.pm_.c:375
msgid "Create"
msgstr "新建"

#: ../../diskdrake.pm_.c:417
#: ../../diskdrake.pm_.c:419
#, c-format
msgid "Use ``%s'' instead"
msgstr "用 ``%s'' 代替"

#: ../../diskdrake.pm_.c:419
#: ../../diskdrake_interactive.pm_.c:362
msgid "Delete"
msgstr "删除"

#: ../../diskdrake.pm_.c:423
msgid "Use ``Unmount'' first"
msgstr "请先做 ``Unmount'' "

#: ../../diskdrake.pm_.c:424
#: ../../diskdrake_interactive.pm_.c:480
#, c-format
msgid "After changing type of partition %s, all data on this partition will be lost"
msgstr "在改变分区表 %s 的类型之后, 在这个分区上的所有资料将要被清除"

#: ../../diskdrake.pm_.c:478
#: ../../diskdrake_interactive.pm_.c:522
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "您想把设备 %s 装载到哪里?"

#: ../../diskdrake.pm_.c:500
msgid "Mount options"
msgstr "装载选项"

#: ../../diskdrake.pm_.c:507
msgid "Various"
msgstr "变量"

#: ../../diskdrake.pm_.c:525
msgid "Removable media"
msgstr "可移动介质"

#: ../../diskdrake.pm_.c:532
msgid "Change type"
msgstr "改变类型"

#: ../../diskdrake.pm_.c:533
#: ../../diskdrake_interactive.pm_.c:487
msgid "Which filesystem do you want?"
msgstr "您需要使用哪种文件系统?"

#: ../../diskdrake.pm_.c:564
msgid "Scanning available nfs shared resource"
msgstr "扫描有效的NFS共享资源"

#: ../../diskdrake.pm_.c:569
#, c-format
msgid "Scanning available nfs shared resource of server %s"
msgstr "扫描服务器 %s 的有效的NFS共享资源"

#: ../../diskdrake.pm_.c:578
#: ../../diskdrake.pm_.c:648
msgid "If the list above doesn't contain the wanted entry, enter it here:"
msgstr "如果上述列表中没有你要的项, 请输入:"

#: ../../diskdrake.pm_.c:581
#: ../../diskdrake.pm_.c:651
msgid "Server"
msgstr "服务器"

#: ../../diskdrake.pm_.c:582
#: ../../diskdrake.pm_.c:652
msgid "Shared resource"
msgstr "共享资源"

#: ../../diskdrake.pm_.c:615
msgid "Scanning available samba shared resource"
msgstr "扫描有效的samba共享资源"

#: ../../diskdrake.pm_.c:626
#: ../../diskdrake.pm_.c:639
#, c-format
msgid "Scanning available samba shared resource of server %s"
msgstr "扫描服务器 %s 的有效的samba共享资源"

#: ../../diskdrake_interactive.pm_.c:163
msgid "Choose a partition"
msgstr "选择分区"

#: ../../diskdrake_interactive.pm_.c:163
msgid "Choose another partition"
msgstr "选择其他分区"

#: ../../diskdrake_interactive.pm_.c:188
msgid "Exit"
msgstr "退出"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Toggle to expert mode"
msgstr "进入专家模式"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Toggle to normal mode"
msgstr "进入正常模式"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Undo"
msgstr "撤销"

#: ../../diskdrake_interactive.pm_.c:229
msgid "Continue anyway?"
msgstr "冒险继续执行?"

#: ../../diskdrake_interactive.pm_.c:234
msgid "Quit without saving"
msgstr "不保存改变就退出"

#: ../../diskdrake_interactive.pm_.c:234
msgid "Quit without writing the partition table?"
msgstr "不写入分区表而退出?"

#: ../../diskdrake_interactive.pm_.c:237
msgid "Do you want to save /etc/fstab modifications"
msgstr "您想要保存 /etc/fstab 修改吗 ?"

#: ../../diskdrake_interactive.pm_.c:247
msgid "Auto allocate"
msgstr "自动分配"

#: ../../diskdrake_interactive.pm_.c:247
msgid "Clear all"
msgstr "全部清除"

#: ../../diskdrake_interactive.pm_.c:247
#: ../../install_steps_interactive.pm_.c:171
msgid "More"
msgstr "更多"

#: ../../diskdrake_interactive.pm_.c:250
msgid "Hard drive information"
msgstr "硬盘信息"

#: ../../diskdrake_interactive.pm_.c:267
msgid "Not enough space for auto-allocating"
msgstr "没有足够空闲空间自动分配给新分区"

#: ../../diskdrake_interactive.pm_.c:273
msgid "All primary partitions are used"
msgstr "主区数目已经满了"

#: ../../diskdrake_interactive.pm_.c:274
msgid "I can't add any more partition"
msgstr "我无法再新增任何分区了"

#: ../../diskdrake_interactive.pm_.c:275
msgid "To have more partitions, please delete one to be able to create an extended partition"
msgstr "如果需要更多的分区，请删除一个主分区以创建扩展分区"

#: ../../diskdrake_interactive.pm_.c:285
msgid "Save partition table"
msgstr "保存分区表"

#: ../../diskdrake_interactive.pm_.c:286
msgid "Restore partition table"
msgstr "正在尝试恢复分区表"

#: ../../diskdrake_interactive.pm_.c:287
msgid "Rescue partition table"
msgstr "正在尝试修复分区表"

#: ../../diskdrake_interactive.pm_.c:289
msgid "Reload partition table"
msgstr "重新读取分区表"

#: ../../diskdrake_interactive.pm_.c:293
msgid "Removable media automounting"
msgstr "自动装载可移动介质"

#: ../../diskdrake_interactive.pm_.c:301
#: ../../diskdrake_interactive.pm_.c:321
msgid "Select file"
msgstr "选择文件"

#: ../../diskdrake_interactive.pm_.c:308
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"备份分区表的大小和原来的不同\n"
"还有继续 ?"

#: ../../diskdrake_interactive.pm_.c:322
msgid "Warning"
msgstr "警告"

#: ../../diskdrake_interactive.pm_.c:323
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"请在驱动器中插入一张软盘\n"
"这张软盘上所有的数据将要被清除"

#: ../../diskdrake_interactive.pm_.c:334
msgid "Trying to rescue partition table"
msgstr "正在尝试恢复分区表"

#: ../../diskdrake_interactive.pm_.c:340
msgid "Detailed information"
msgstr "详细信息"

#: ../../diskdrake_interactive.pm_.c:354
#: ../../diskdrake_interactive.pm_.c:590
msgid "Resize"
msgstr "改变大小"

#: ../../diskdrake_interactive.pm_.c:355
#: ../../diskdrake_interactive.pm_.c:630
msgid "Move"
msgstr "移动"

#: ../../diskdrake_interactive.pm_.c:356
msgid "Format"
msgstr "格式化"

#: ../../diskdrake_interactive.pm_.c:358
msgid "Active"
msgstr "可启动"

#: ../../diskdrake_interactive.pm_.c:359
msgid "Add to RAID"
msgstr "加入磁盘阵列"

#: ../../diskdrake_interactive.pm_.c:360
msgid "Add to LVM"
msgstr "加入磁盘阵列"

#: ../../diskdrake_interactive.pm_.c:363
msgid "Remove from RAID"
msgstr "从磁盘阵列中移出"

#: ../../diskdrake_interactive.pm_.c:364
msgid "Remove from LVM"
msgstr "从磁盘阵列中移出"

#: ../../diskdrake_interactive.pm_.c:365
msgid "Modify RAID"
msgstr "更改磁盘阵列设定"

#: ../../diskdrake_interactive.pm_.c:366
msgid "Use for loopback"
msgstr "用于回环"

#: ../../diskdrake_interactive.pm_.c:409
msgid "Create a new partition"
msgstr "创建一个新的分区"

#: ../../diskdrake_interactive.pm_.c:412
msgid "Start sector: "
msgstr "开始扇区: "

#: ../../diskdrake_interactive.pm_.c:414
#: ../../diskdrake_interactive.pm_.c:732
msgid "Size in MB: "
msgstr "大小 (MB) "

#: ../../diskdrake_interactive.pm_.c:415
#: ../../diskdrake_interactive.pm_.c:733
msgid "Filesystem type: "
msgstr "文件系统类型: "

#: ../../diskdrake_interactive.pm_.c:416
#: ../../diskdrake_interactive.pm_.c:936
#: ../../diskdrake_interactive.pm_.c:1010
msgid "Mount point: "
msgstr "装载点:"

#: ../../diskdrake_interactive.pm_.c:420
msgid "Preference: "
msgstr "偏好设定"

#: ../../diskdrake_interactive.pm_.c:462
msgid "Remove the loopback file?"
msgstr "删除格式化回环(loopback)文件?"

#: ../../diskdrake_interactive.pm_.c:486
msgid "Change partition type"
msgstr "改变分区类型"

#: ../../diskdrake_interactive.pm_.c:491
msgid "Switching from ext2 to ext3"
msgstr "把ext2切换到ext3"

#: ../../diskdrake_interactive.pm_.c:521
#, c-format
msgid "Where do you want to mount loopback file %s?"
msgstr "您想把回环(loopback)文件 %s 装载到哪里?"

#: ../../diskdrake_interactive.pm_.c:528
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"无法取消设定的装载点, 这个分区正用于回环.\n"
"需要先取消回环"

#: ../../diskdrake_interactive.pm_.c:549
msgid "Computing FAT filesystem bounds"
msgstr "计算 fat 文件系统的边界"

#: ../../diskdrake_interactive.pm_.c:549
#: ../../diskdrake_interactive.pm_.c:605
#: ../../install_interactive.pm_.c:116
msgid "Resizing"
msgstr "正在改变大小"

#: ../../diskdrake_interactive.pm_.c:578
msgid "This partition is not resizeable"
msgstr "不能改变这个分区的大小"

#: ../../diskdrake_interactive.pm_.c:583
msgid "All data on this partition should be backed-up"
msgstr "应该先备份在这个分区上的所有数据"

#: ../../diskdrake_interactive.pm_.c:585
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "改变分区 %s 的大小之后, 这个分区上现有的所有资料将被清除"

#: ../../diskdrake_interactive.pm_.c:590
msgid "Choose the new size"
msgstr "选择新的大小"

#: ../../diskdrake_interactive.pm_.c:591
msgid "New size in MB: "
msgstr "新大小 (MB): "

#: ../../diskdrake_interactive.pm_.c:631
msgid "Which disk do you want to move it to?"
msgstr "您想移动到哪个盘 ?"

#: ../../diskdrake_interactive.pm_.c:632
msgid "Sector"
msgstr "扇区"

#: ../../diskdrake_interactive.pm_.c:633
msgid "Which sector do you want to move it to?"
msgstr "您想移动到哪个扇区 ?"

#: ../../diskdrake_interactive.pm_.c:636
msgid "Moving"
msgstr "移动中"

#: ../../diskdrake_interactive.pm_.c:636
msgid "Moving partition..."
msgstr "正在移动分区..."

#: ../../diskdrake_interactive.pm_.c:657
msgid "Choose an existing RAID to add to"
msgstr "选择加入一个已存在的 RAID"

#: ../../diskdrake_interactive.pm_.c:658
#: ../../diskdrake_interactive.pm_.c:676
msgid "new"
msgstr "新建"

#: ../../diskdrake_interactive.pm_.c:674
msgid "Choose an existing LVM to add to"
msgstr "选择加入一个已存在的 LVM"

#: ../../diskdrake_interactive.pm_.c:679
msgid "LVM name?"
msgstr "LVM名称?"

#: ../../diskdrake_interactive.pm_.c:718
msgid "This partition can't be used for loopback"
msgstr "这个分区不能被用于回环"

#: ../../diskdrake_interactive.pm_.c:730
msgid "Loopback"
msgstr "回环"

#: ../../diskdrake_interactive.pm_.c:731
msgid "Loopback file name: "
msgstr "回环文件名: "

#: ../../diskdrake_interactive.pm_.c:736
msgid "Give a file name"
msgstr "文件名"

#: ../../diskdrake_interactive.pm_.c:739
msgid "File already used by another loopback, choose another one"
msgstr "文件已经被另一个回环使用, 请选择其他"

#: ../../diskdrake_interactive.pm_.c:740
msgid "File already exists. Use it?"
msgstr "文件已经存在. 使用现有的文件?"

#: ../../diskdrake_interactive.pm_.c:784
msgid "device"
msgstr "设备"

#: ../../diskdrake_interactive.pm_.c:785
msgid "level"
msgstr "级别"

#: ../../diskdrake_interactive.pm_.c:786
msgid "chunk size"
msgstr "组块大小"

#: ../../diskdrake_interactive.pm_.c:801
msgid "Be careful: this operation is dangerous."
msgstr "小心: 这个操作有危险."

#: ../../diskdrake_interactive.pm_.c:816
msgid "What type of partitioning?"
msgstr "请问您分区类型?"

#: ../../diskdrake_interactive.pm_.c:834
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > 1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't need /boot"
msgstr ""
"对不起, 我不能在硬盘的柱面 1024 之后创建 /boot 分区.\n"
"如果您使用 LILO, 它没法正常工作; 假如您不使用 LILO, \n"
"您不需要创建 /boot 分区"

#: ../../diskdrake_interactive.pm_.c:838
msgid ""
"The partition you've selected to add as root (/) is physically located beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"您选择作为根 (/) 加入的分区, 在硬盘上的位置位于第 1024 柱面之后,\n"
"并且您没有创建 /boot 分区.\n"
"如果您计划使用 LILO 启动管理程序, 请在适当位置加入 /boot 分区."

#: ../../diskdrake_interactive.pm_.c:844
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"So be careful to add a /boot partition"
msgstr ""
"您选择了把软件 RAID 分区作为根 (/).\n"
"如果没有 /boot 分区, 我们的开机引导程序无法处理这种情况.\n"
"所以, 请增加一个 /boot 分区."

#: ../../diskdrake_interactive.pm_.c:864
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "驱动器 %s 的分区表将会写入磁盘中 !"

#: ../../diskdrake_interactive.pm_.c:868
msgid "You'll need to reboot before the modification can take place"
msgstr "您必需重新开机使您做的更动生效"

#: ../../diskdrake_interactive.pm_.c:879
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "格式化分区 %s 之后, 在这个分区上的所有资料将要被清除"

#: ../../diskdrake_interactive.pm_.c:881
msgid "Formatting"
msgstr "正在格式化"

#: ../../diskdrake_interactive.pm_.c:882
#, c-format
msgid "Formatting loopback file %s"
msgstr "正在格式化回环(loopback)文件 %s"

#: ../../diskdrake_interactive.pm_.c:883
#: ../../install_steps_interactive.pm_.c:419
#, c-format
msgid "Formatting partition %s"
msgstr "正在格式化分区 %s"

#: ../../diskdrake_interactive.pm_.c:894
msgid "Hide files"
msgstr "隐藏文件"

#: ../../diskdrake_interactive.pm_.c:894
msgid "Move files to the new partition"
msgstr "移动文件到新分区"

#: ../../diskdrake_interactive.pm_.c:895
#, c-format
msgid ""
"Directory %s already contain some data\n"
"(%s)"
msgstr ""
"目录 %s 已经包含数据\n"
"(%s)"

#: ../../diskdrake_interactive.pm_.c:906
msgid "Moving files to the new partition"
msgstr "正在移动文件到新分区"

#: ../../diskdrake_interactive.pm_.c:910
#, c-format
msgid "Copying %s"
msgstr "拷贝 %s"

#: ../../diskdrake_interactive.pm_.c:914
#, c-format
msgid "Removing %s"
msgstr "删除 %s"

#: ../../diskdrake_interactive.pm_.c:937
#: ../../diskdrake_interactive.pm_.c:996
msgid "Device: "
msgstr "设备: "

#: ../../diskdrake_interactive.pm_.c:938
#, c-format
msgid ""
"DOS drive letter: %s (just a guess)\n"
""
msgstr ""
"DOS 下的盘符: %s ( 只是猜测 )\n"
""

#: ../../diskdrake_interactive.pm_.c:942
#: ../../diskdrake_interactive.pm_.c:950
#: ../../diskdrake_interactive.pm_.c:1014
msgid "Type: "
msgstr "类型: "

#: ../../diskdrake_interactive.pm_.c:946
msgid "Name: "
msgstr "名称: "

#: ../../diskdrake_interactive.pm_.c:954
#, c-format
msgid ""
"Start: sector %s\n"
""
msgstr ""
"开始: 第 %s 扇区\n"
""

#: ../../diskdrake_interactive.pm_.c:955
#, c-format
msgid "Size: %s"
msgstr "大小: %s"

#: ../../diskdrake_interactive.pm_.c:957
#, c-format
msgid ", %s sectors"
msgstr ", 第 %s 扇区"

#: ../../diskdrake_interactive.pm_.c:959
#, c-format
msgid ""
"Cylinder %d to cylinder %d\n"
""
msgstr ""
"第 %d 柱面到第 %d 柱面\n"
""

#: ../../diskdrake_interactive.pm_.c:960
msgid ""
"Formatted\n"
""
msgstr ""
"已格式化\n"
""

#: ../../diskdrake_interactive.pm_.c:961
msgid ""
"Not formatted\n"
""
msgstr ""
"未格式化\n"
""

#: ../../diskdrake_interactive.pm_.c:962
msgid ""
"Mounted\n"
""
msgstr ""
"已装载\n"
""

#: ../../diskdrake_interactive.pm_.c:963
#, c-format
msgid ""
"RAID md%s\n"
""
msgstr ""
"磁盘阵列 (RAID) md%s\n"
""

#: ../../diskdrake_interactive.pm_.c:965
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
""
msgstr ""
"回环文件:\n"
"   %s\n"
""

#: ../../diskdrake_interactive.pm_.c:966
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
""
msgstr ""
"预设的开机分区\n"
"    (给 MS-DOS 开机程序用的, 跟 lilo 无关)\n"
""

#: ../../diskdrake_interactive.pm_.c:968
#, c-format
msgid ""
"Level %s\n"
""
msgstr ""
"级别 %s\n"
""

#: ../../diskdrake_interactive.pm_.c:969
#, c-format
msgid ""
"Chunk size %s\n"
""
msgstr ""
"组块大小 %s\n"
""

#: ../../diskdrake_interactive.pm_.c:970
#, c-format
msgid ""
"RAID-disks %s\n"
""
msgstr ""
"RAID 磁盘 %s\n"
""

#: ../../diskdrake_interactive.pm_.c:972
#, c-format
msgid "Loopback file name: %s"
msgstr "回环文件名称: %s"

#: ../../diskdrake_interactive.pm_.c:975
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition, you should\n"
"probably leave it alone.\n"
""
msgstr ""
"\n"
"本分区是驱动分区\n"
"保留不动\n"
""

#: ../../diskdrake_interactive.pm_.c:978
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
""
msgstr ""
"\n"
"本特别启动分区\n"
"是保留给双重启动系统\n"
""

#: ../../diskdrake_interactive.pm_.c:997
#, c-format
msgid ""
"Size: %s\n"
""
msgstr ""
"大小: %s\n"
""

#: ../../diskdrake_interactive.pm_.c:998
#, c-format
msgid ""
"Geometry: %s cylinders, %s heads, %s sectors\n"
""
msgstr ""
"硬盘参数: %s 柱面, %s 磁头, %s 扇区\n"
""

#: ../../diskdrake_interactive.pm_.c:999
msgid "Info: "
msgstr "信息: "

#: ../../diskdrake_interactive.pm_.c:1000
#, c-format
msgid ""
"LVM-disks %s\n"
""
msgstr ""
"LVM 磁盘 %s\n"
""

#: ../../diskdrake_interactive.pm_.c:1001
#, c-format
msgid ""
"Partition table type: %s\n"
""
msgstr ""
"分区表类型: %s\n"
""

#: ../../diskdrake_interactive.pm_.c:1002
#, c-format
msgid ""
"on bus %d id %d\n"
""
msgstr ""
"在总线 %d id %d 上\n"
""

#: ../../diskdrake_interactive.pm_.c:1016
#, c-format
msgid "Options: %s"
msgstr "选项: %s"

#: ../../fs.pm_.c:447
#: ../../fs.pm_.c:457
#: ../../fs.pm_.c:461
#: ../../fs.pm_.c:465
#: ../../fs.pm_.c:469
#: ../../fs.pm_.c:473
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s, 格式化 %s 失败"

#: ../../fs.pm_.c:506
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "不知道如何格式化 %s 成 %s 类型"

#: ../../fs.pm_.c:568
msgid "mount failed"
msgstr "装载失败"

#: ../../fs.pm_.c:588
#, c-format
msgid "fsck failed with exit code %d or signal %d"
msgstr "fsck 失败, 退出码 %d 或 信号 %d"

#: ../../fs.pm_.c:597
#: ../../fs.pm_.c:603
#: ../../partition_table.pm_.c:560
msgid "mount failed: "
msgstr "装载失败: "

#: ../../fs.pm_.c:618
#: ../../partition_table.pm_.c:556
#, c-format
msgid "error unmounting %s: %s"
msgstr "卸载 %s 失败: %s"

#: ../../fsedit.pm_.c:21
msgid "simple"
msgstr "简单"

#: ../../fsedit.pm_.c:30
msgid "server"
msgstr "服务器"

#: ../../fsedit.pm_.c:461
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "您不能把 JFS 用于小于 16 MB 的分区"

#: ../../fsedit.pm_.c:462
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "您不能把 ReiserFS 用于小于 32 MB 的分区"

#: ../../fsedit.pm_.c:471
msgid "Mount points must begin with a leading /"
msgstr "载入点必需要以 / 为开头"

#: ../../fsedit.pm_.c:472
#, c-format
msgid ""
"There is already a partition with mount point %s\n"
""
msgstr ""
"已经有一个分区的装载点是 %s\n"
""

#: ../../fsedit.pm_.c:476
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "不能用LVM逻辑卷做 %s 载入点"

#: ../../fsedit.pm_.c:478
msgid "This directory should remain within the root filesystem"
msgstr "这个目录应该保留在根分区内"

#: ../../fsedit.pm_.c:480
msgid ""
"You need a true filesystem (ext2, reiserfs) for this mount point\n"
""
msgstr ""
"这个加载点需要一个真正的文件系统(ext2, reiserfs)\n"
""

#: ../../fsedit.pm_.c:596
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "在打开 %s 写入时发生错误: %s"

#: ../../fsedit.pm_.c:681
msgid "An error has occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"发生错误! 新建文件系统时找不到可用的设备。\n"
"请检查您的硬件以确定问题的原因 !"

#: ../../fsedit.pm_.c:704
msgid "You don't have any partitions!"
msgstr "您现在一个分区也没有!"

#: ../../help.pm_.c:13
msgid ""
"GNU/Linux is a multiuser system, and this means that each user can have his\n"
"own preferences, his own files and so on. You can read the ``User Guide''\n"
"to learn more. But unlike \"root\", which is the administrator, the users\n"
"you will add here will not be entitled to change anything except their own\n"
"files and their own configuration. You will have to create at least one\n"
"regular user for yourself. That account is where you should log in for\n"
"routine use. Although it is very practical to log in as \"root\" everyday,\n"
"it may also be very dangerous! The slightest mistake could mean that your\n"
"system would not work any more. If you make a serious mistake as a regular\n"
"user, you may only lose some information, but not the entire system.\n"
"\n"
"First, you have to enter your real name. This is not mandatory, of course -\n"
"as you can actually enter whatever you want. DrakX will then take the first\n"
"word you have entered in the box and will bring it over to the \"User\n"
"name\". This is the name this particular user will use to log into the\n"
"system. You can change it. You then have to enter a password here. A\n"
"non-privileged (regular) user's password is not as crucial as that of\n"
"\"root\" from a security point of view, but that is no reason to neglect it\n"
"- after all, your files are at risk.\n"
"\n"
"If you click on \"Accept user\", you can then add as many as you want. Add\n"
"a user for each one of your friends: your father or your sister, for\n"
"example. When you finish adding all the users you want, select \"Done\".\n"
"\n"
"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
"for that user (bash by default)."
msgstr ""
"GNU/Linux 是一个多用户系统, 请阅读 \"用户手册\"\n"
"点击 接受, 增加新用户, 选择 结束, 完成\n"
"点击 高级, 你可以修改用户的命令解释器 shell."

#: ../../help.pm_.c:41
msgid ""
"Listed above are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, they are good for most common\n"
"installs. If you make any changes, you must at least define a root\n"
"partition (\"/\"). Do not choose too small a partition or you will not be\n"
"able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a partition for \"/home\"\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"以上是检测到的Linux分区. 你可以采用分区精灵创建的分区,如果你要修改, 至少得定义\n"
"root根分区(\"/\"). 分区太小的话, 可能无法安装足够的软件包.\n"
"你也可以创建\"/home\"分区来存放用户数据.\n"
"\n"
"\n"
"每个分区按 \"名称\",\"容量\"列表."

#: ../../help.pm_.c:72
msgid ""
"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
"knows if a selected package is located on another CDROM and will eject the\n"
"current CD and ask you to insert a different one as required."
msgstr ""
"Mandrake安装需要好几张CDROM. DrakeX\n"
"会知道相应的软件包在哪张CDROM, 并会弹出当前CD要求你更换相应的CD."

#: ../../help.pm_.c:77
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"you are not supposed to know them all by heart.\n"
"\n"
"If you are performing a standard installation from CDROM, you will first be\n"
"asked to specify the CDs you currently have (in Expert mode only). Check\n"
"the CD labels and highlight the boxes corresponding to the CDs you have\n"
"available for installation. Click \"OK\" when you are ready to continue.\n"
"\n"
"Packages are sorted in groups corresponding to a particular use of your\n"
"machine. The groups themselves are sorted into four sections:\n"
"\n"
" * \"Workstation\": if you plan to use your machine as a workstation, select\n"
"one or more of the corresponding groups.\n"
"\n"
" * \"Development\": if the machine is to be used for programming, choose the\n"
"desired group(s).\n"
"\n"
" * \"Server\": finally, if the machine is intended to be a server, you will\n"
"be able to select which of the most common services you wish to see\n"
"installed on the machine.\n"
"\n"
" * \"Graphical Environment\": this is where you will choose your preferred\n"
"graphical environment. At least one must be selected if you want to have a\n"
"graphical workstation!\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"Individual package selection\" box, which is useful if\n"
"you are familiar with the packages being offered or if you want to have\n"
"total control over what will be installed.\n"
"\n"
"If you started the installation in \"Update\" mode, you can unselect all\n"
"groups to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""
"现在是指定安装程序的时候了.\n"
"\n"
"程序安相应的组分类. 分类有:\n"
"\n"
"* \"工作站\": 安装工作站组.\n"
"\n"
"* \"开发\": 安装开发所需的相应的组.\n"
"\n"
"* \"服务器\": 安装普通服务器.\n"
"\n"
"* \"图形环境\": 安装图形环境工作站.\n"
"\n"
"选中\"单个软件包选择\", 如果你要手工控制软件包选择.\n"
"\n"
"\"升级\"安装时, 你可以取消所有组的选择而不会安装新的软件包,\n"
"用于修复系统或升级系统."

#: ../../help.pm_.c:115
msgid ""
"Finally, depending on your choice of whether or not to select individual\n"
"packages, you will be presented a tree containing all packages classified\n"
"by groups and subgroups. While browsing the tree, you can select entire\n"
"groups, subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right. When your selection is finished, click the \"Install\" button which\n"
"will then launch the installation process. Depending on the speed of your\n"
"hardware and the number of packages that need to be installed, it may take\n"
"a while to complete the process. A time to complete estimate is displayed\n"
"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
"of coffee.\n"
"\n"
"!! If a server package has been selected either intentionally or because it\n"
"was part of a whole group, you will be asked to confirm that you really\n"
"want those servers to be installed. Under Mandrake Linux, any installed\n"
"servers are started by default at boot time. Even if they are safe and have\n"
"no known issues at the time the distribution was shipped, it may happen\n"
"that security holes are discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
"install the listed services and they will be started automatically by\n"
"default. !!\n"
"\n"
"The \"Automatic dependencies\" option simply disables the warning dialog\n"
"which appears whenever the installer automatically selects a package. This\n"
"occurs because it has determined that it needs to satisfy a dependency with\n"
"another package in order to successfully complete the installation.\n"
"\n"
"The tiny floppy disc icon at the bottom of the list allows to load the\n"
"packages list chosen during a previous installation. Clicking on this icon\n"
"will ask you to insert a floppy disk previously created at the end of\n"
"another installation. See the second tip of last step on how to create such\n"
"a floppy."
msgstr ""

#: ../../help.pm_.c:151
msgid ""
"If you wish to connect your computer to the Internet or to a local network,\n"
"please choose the correct option. Please turn on your device before\n"
"choosing the correct option to let DrakX detect it automatically.\n"
"\n"
"Mandrake Linux proposes the configuration of an Internet connection at\n"
"installation time. Available connections are: traditional modem, ISDN\n"
"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
"(Ethernet).\n"
"\n"
"Here, we will not detail each configuration. Simply make sure that you have\n"
"all the parameters from your Internet Service Provider or system\n"
"administrator.\n"
"\n"
"You can consult the manual chapter about Internet connections for details\n"
"about the configuration, or simply wait until your system is installed and\n"
"use the program described there to configure your connection.\n"
"\n"
"If you wish to configure the network later after installation or if you\n"
"have finished configuring your network connection, click \"Cancel\"."
msgstr ""

#: ../../help.pm_.c:172
msgid ""
"You may now choose which services you wish to start at boot time.\n"
"\n"
"Here are presented all the services available with the current\n"
"installation. Review them carefully and uncheck those which are not always\n"
"needed at boot time.\n"
"\n"
"You can get a short explanatory text about a service by selecting a\n"
"specific service. However, if you are not sure whether a service is useful\n"
"or not, it is safer to leave the default behavior.\n"
"\n"
"At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need."
msgstr ""
"现在您可以选择在开机时启动哪些服务.\n"
"\n"
"\n"
"移动您的鼠标到选项上面会弹出帮助提示, 解释这个服务的作用.\n"
"\n"
"\n"
"如果您的机器将作为服务器, 在这一步请格外小心: 请不要启动任何\n"
"您不需要的服务. 请注意某些服务对服务器有潜在的危险.通常, 只选择您确实要使用的那些服务."

#: ../../help.pm_.c:188
msgid ""
"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
"local time according to the time zone you selected."
msgstr "GNU/Linux 内部使用 GMT (格林尼治标准时间), 然后根据您选择的时区转换成当地时间."

#: ../../help.pm_.c:192
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
"will try to configure X automatically.\n"
"\n"
"It is extremely rare for it to fail, unless the hardware is very old (or\n"
"very new). If it succeeds, it will start X automatically with the best\n"
"resolution possible depending on the size of the monitor. A window will\n"
"then appear and ask you if you can see it.\n"
"\n"
"If you are doing an \"Expert\" install, you will enter the X configuration\n"
"wizard. See the corresponding section of the manual for more information\n"
"about this wizard.\n"
"\n"
"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
"the next step. If you cannot see the message, it simply means that the\n"
"configuration was wrong and the test will automatically end after 10\n"
"seconds, restoring the screen."
msgstr ""

#: ../../help.pm_.c:212
msgid ""
"The first time you try the X configuration, you may not be very satisfied\n"
"with its display (screen is too small, shifted left or right...). Hence,\n"
"even if X starts up correctly, DrakX then asks you if the configuration\n"
"suits you. It will also propose to change it by displaying a list of valid\n"
"modes it could find, asking you to select one.\n"
"\n"
"As a last resort, if you still cannot get X to work, choose \"Change\n"
"graphics card\", select \"Unlisted card\", and when prompted on which\n"
"server you want, choose \"FBDev\". This is a failsafe option which works\n"
"with any modern graphics card. Then choose \"Test again\" to be sure."
msgstr ""
"如果DrakX无法找到合适的图形卡, 你可在\n"
"\"改变图形卡\",选择\"其它卡\", 选择\n"
"\"FBDev\", 然后再测试."

#: ../../help.pm_.c:224
msgid ""
"Finally, you will be asked whether you want to see the graphical interface\n"
"at boot. Note this question will be asked even if you chose not to test the\n"
"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
"act as a server, or if you were not successful in getting the display\n"
"configured."
msgstr "最后, 你会被问是否开机进入图形界面."

#: ../../help.pm_.c:231
msgid ""
"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
"the prompt. But in case your computer cannot boot from the CDROM, you\n"
"should come back to this step for help in at least two situations:\n"
"\n"
" * when installing the boot loader, DrakX will rewrite the boot sector (MBR)\n"
"of your main disk (unless you are using another boot manager) so that you\n"
"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
"your system). If you need to reinstall Windows, the Microsoft install\n"
"process will rewrite the boot sector, and then you will not be able to\n"
"start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start up GNU/Linux from the hard disk,\n"
"this floppy disk will be the only means of starting up GNU/Linux. It\n"
"contains a fair number of system tools for restoring a system, which has\n"
"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
"password, or any other reason.\n"
"\n"
"When you click on this step, you will be asked to enter a disk inside the\n"
"drive. The floppy disk you will insert must be empty or contain data which\n"
"you do not need. You will not have to format it since DrakX will rewrite\n"
"the whole disk."
msgstr ""

#: ../../help.pm_.c:255
msgid ""
"At this point you need to choose where on your hard drive to install your\n"
"Mandrake Linux operating system. If your hard drive is empty or if an\n"
"existing operating system is using all the space available, you will need\n"
"to partition it. Basically, partitioning a hard drive consists of logically\n"
"dividing it to create space to install your new Mandrake Linux system.\n"
"\n"
"Because the effects of the partitioning process are usually irreversible,\n"
"partitioning can be intimidating and stressful if you are an inexperienced\n"
"user. Fortunately, there is a wizard which simplifies this process. Before\n"
"beginning, please consult the manual and take your time.\n"
"\n"
"If you are running the install in Expert mode, you will enter DiskDrake,\n"
"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
"partitions. See the DiskDrake chapter of the manual. From the installation\n"
"interface, you can use the wizards as described here by clicking the\n"
"\"Wizard\" button of the dialog.\n"
"\n"
"If partitions have already been defined, either from a previous\n"
"installation or from another partitioning tool, simply select those to\n"
"install your Linux system.\n"
"\n"
"If partitions are not defined, you will need to create them using the\n"
"wizard. Depending on your hard drive configuration, several options are\n"
"available:\n"
"\n"
" * \"Use free space\": this option will simply lead to an automatic\n"
"partitioning of your blank drive(s). You will not be prompted further.\n"
"\n"
" * \"Use existing partition\": the wizard has detected one or more existing\n"
"Linux partitions on your hard drive. If you want to use them, choose this\n"
"option.\n"
"\n"
" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
"installed on your hard drive and takes all the space available on it, you\n"
"have to create free space for Linux data. To do that, you can delete your\n"
"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
"be performed without the loss of any data. This solution is recommended if\n"
"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
"\n"
"   Before choosing this option, please understand that after this procedure,\n"
"the size of your Microsoft Windows partition will be smaller than at the\n"
"present time. You will have less free space under Microsoft Windows to\n"
"store your data or to install new software.\n"
"\n"
" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
"present on your hard drive and replace them with your new Mandrake Linux\n"
"system, choose this option. Be careful with this solution because you will\n"
"not be able to revert your choice after confirmation.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Remove Windows\": this will simply erase everything on the drive and\n"
"begin fresh, partitioning everything from scratch. All data on your disk\n"
"will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Expert mode\": choose this option if you want to manually partition\n"
"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
"can very easily lose all your data. Hence, do not choose this unless you\n"
"know what you are doing."
msgstr ""
"这里, 您需要在硬盘上选择用来安装 Mandrake Linux 操作系统的位置.\n"
"如果磁盘是空的, 或者现存的操作系统使用了磁盘上的全部空间, 您需要\n"
"进行分区. 基本上, 做硬盘分区就是把它在逻辑上划分成部分, \n"
"为您新安装的  Mandrake Linux 系统留出可用空间.\n"
"\n"
"\n"
"由于分区过程的后果经常是不可逆转\n"
"这个法师程序简化了这些过程, 请您不必着急, 在开始之前多看看手册.\n"
"\n"
"\n"
"您需要最少两个分区.  一个是操作系统本身使用, \n"
"另一个用作虚拟内存( 也叫做 Swap).\n"
"\n"
"\n"
"如果事先已经设定 (来自以前的安装或其它分区工具), 您只需要从中选择r\n"
"用哪些安装 Linux 系统.\n"
"\n"
"\n"
"如果分区没有事先定义, 您就要自己建立它们. \n"
"您可以使用上述的法师. 根据您的磁盘的配置, 可能有这些不同\n"
"的办法:\n"
"\n"
"* 使用现有的分区:  法师在您的硬盘上检测到了一个或更多Linux 分区 \n"
" 您想要保留它们, 就选择这个选项. \n"
"\n"
"\n"
"* 清除整个磁盘: 如果您希望清除磁盘上所有的分区和数据. 以新安装的\n"
"  Mandrake Linux 系统代替, 就采用这个选项.  请小心采用这个选项, \n"
"  一旦确认, 您就无法撤销您的决定..\n"
"\n"
"\n"
"* 使用 Windows 分区的空余空间: 如果您的硬盘上 安装有Microsoft Windows \n"
" 并且占用了全部的空间, 您必须为 Linux 创建新的分区, 您可以删除整个\n"
"  Microsoft Windows 分区和数据(见 \"清除整个硬盘\" 或 \"专家模式\"方案), 也可以改变 Microsoft Windows 分区的大小. \n"
" 改变大小不会损坏分区中的数据. 我们推荐这个方法, 如果您需要\n"
" 在同一台电脑上 使用 Mandrake Linux 和 Microsoft Windows .\n"
"\n"
"\n"
"  选择之前请您理解您的 Microsoft  Windows 分区将比现在缩小一些\n"
" 您在 Microsoft Windows 下会发现空闲的磁盘变少了. \n"
"\n"
"\n"
"* 专家模式: 如果您喜欢手工做硬盘分区, 就选择这个选项.\n"
"  开始之前请仔细考虑.  这个方法非常有力也非常危险.\n"
"  您可能轻易的毁坏所有的数据. 如果您不清楚请不要使用它.."

#: ../../help.pm_.c:319
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"OK\" to reboot the system. You can start\n"
"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
"soon as the computer has booted up again.\n"
"\n"
"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"which will automatically perform a whole installation without the help of\n"
"an operator, similar to the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"Replay\". This is a partially automated install as the partitioning\n"
"step (and only this one) remains interactive.\n"
"\n"
"    * \"Automated\". Fully automated install: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a great number of similar\n"
"machines. See the Auto install section at our web site.\n"
"\n"
" * \"Save packages selection\"(*): saves the packages selection as made\n"
"previously. Then, when doing another installation, insert the floppy inside\n"
"the driver and run the installation going to the help screen by pressing on\n"
"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""

#: ../../help.pm_.c:350
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"any of them.\n"
"\n"
"Click on \"OK\" when you are ready to format partitions.\n"
"\n"
"Click on \"Cancel\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
"for bad blocks on the disc."
msgstr ""
"新创建的分区都必须格式化.\n"
"\n"
"\n"
"你也可以用格式化删除分区上的数据.\n"
"\n"
"\n"
"点击\"确认\"开始格式化.\n"
"\n"
"\n"
"点击\"取消\"选择其他分区安装Linux."

#: ../../help.pm_.c:376
msgid ""
"Your new Mandrake Linux operating system is currently being installed.\n"
"Depending on the number of packages you will be installing and the speed of\n"
"your computer, this operation could take from a few minutes to a\n"
"significant amount of time.\n"
"\n"
"Please be patient."
msgstr ""
"您的Mandrake操作系统正在安装. 安装将花好几分钟.\n"
"(安装时间依据您的计算机速度和您所选的安装软件包而不同).\n"
"\n"
"\n"
"请耐心等待."

#: ../../help.pm_.c:384
msgid ""
"Before continuing you should read carefully the terms of the license. It\n"
"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
"all the terms in it, click on the \"Refuse\" button which will immediately\n"
"terminate the installation. To continue with the installation, click the\n"
"\"Accept\" button."
msgstr ""

#: ../../help.pm_.c:391
msgid ""
"At this point, it is time to choose the security level desired for the\n"
"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
"the data stored in it is crucial, the higher the security level should be.\n"
"However, a higher security level is generally obtained at the expenses of\n"
"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
"get more information about the meaning of these levels.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""

#: ../../help.pm_.c:401
msgid ""
"At this point, you need to choose what partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have been already\n"
"defined, either from a previous installation of GNU/Linux or from another\n"
"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"Clear all\": this option deletes all partitions on the selected hard\n"
"drive.\n"
"\n"
" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
"and swap partitions in free space of your hard drive.\n"
"\n"
" * \"Rescue partition table\": if your partition table is damaged, you can\n"
"try to recover it using this option. Please be careful and remember that it\n"
"can fail.\n"
"\n"
" * \"Undo\": use this option to cancel your changes.\n"
"\n"
" * \"Reload\": you can use this option if you wish to undo all changes and\n"
"load your initial partitions table.\n"
"\n"
" * \"Wizard\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good knowledge of\n"
"partitioning.\n"
"\n"
" * \"Restore from floppy\": this option will allow you to restore a\n"
"previously saved partition table from floppy disk.\n"
"\n"
" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
"later partition-table recovery if necessary. It is strongly recommended to\n"
"perform this step.\n"
"\n"
" * \"Done\": when you have finished partitioning your hard drive, this will\n"
"save your changes back to disc.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
"\n"
" * Ctrl-d to delete a partition;\n"
"\n"
" * Ctrl-m to set the mount point.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"这里,你需要选择安装Mandrake的分区. 如果是一个空盘或整个盘安装了操作系统, 你得重新分区.\n"
"\n"
"\n"
"创建分区,先选择硬盘.\n"
"\n"
"\n"
"   * 清空: 删除硬盘上的所有分区.\n"
"\n"
"\n"
"   * 自动分配: 自动分配空闲空间.\n"
"\n"
"\n"
"   * 恢复分区表: 用于在分区表损坏时, 恢复分区表.\n"
"\n"
"\n"
"   * 取消: 取消修改.\n"
"\n"
"\n"
"   * 重读分区表: 取消所有修改, 重读分区表.\n"
"\n"
"\n"
"   * 精灵: 自动分配.\n"
"\n"
"\n"
"   * 从软盘恢复: 从软盘恢复以前保存的分区表.\n"
"\n"
"\n"
"   * 保存分区表到软盘: 保存分区表.\n"
"\n"
"\n"
"   * 完成: 结束分区.\n"
"\n"
"\n"
"          * Ctrl-c 创建新分区.\n"
"\n"
"          * Ctrl-d 删除分区.\n"
"\n"
"          * Ctrl-m 设置载入点.\n"
"\n"
"\n"
"安装PPC时, 你应该创建至少1M的HFS分区用于安装开机程序 yaboot."

#: ../../help.pm_.c:460
msgid ""
"More than one Microsoft Windows partition has been detected on your hard\n"
"drive. Please choose the one you want resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"发现一个或多个Windows分区.\n"
"选择一个分区改变大小,以便安装Linux.\n"
"\n"
"\n"
"分区按 \"Linux 名称\", \"Windows 名称\", \"容量\"列表."

#: ../../help.pm_.c:491
msgid "Please be patient. This operation can take several minutes."
msgstr "请耐心等待. 该操作可能花好几分钟."

#: ../../help.pm_.c:494
msgid ""
"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
"installation or if you want to have greater control (\"Expert\"). You also\n"
"have the choice of performing a new install or an upgrade of an existing\n"
"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
"existing system.\n"
"\n"
"Please choose \"Install\" if there are no previous version of Mandrake\n"
"Linux installed or if you wish to boot between various operating systems.\n"
"\n"
"Please choose \"Update\" if you wish to update or repair an already\n"
"installed version of Mandrake Linux.\n"
"\n"
"Depending on your knowledge of GNU/Linux, please choose one of the\n"
"following to install or update your Mandrake Linux operating system:\n"
"\n"
" * Recommended: choose this if you have never installed a GNU/Linux\n"
"operating system. The installation will be very easy and you will only be\n"
"asked a few questions.\n"
"\n"
" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
"installation class. The expert installation will allow you to perform a\n"
"highly customized installation. Answering some of the questions can be\n"
"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
"this unless you know what you are doing."
msgstr ""
"DrakX 现在需要知道你选择(\"建议\")安装还是更高控制的(\"专家\").\n"
"选择 \"安装\" 如果原来没有安装 Mandrake Linux\n"
"或者您希望使用多个操作系统.\n"
"\n"
"\n"
"选择\"升级\", 如果您想升级以前版本的 Mandrake Linux.\n"
"\n"
"\n"
"您可以根据自己对 GNU/Linux 了解的程度, 选择下列的安装级别:\n"
"\n"
"* 建议:如果您从来没有安装过任何 GNU/Linux 操作系统, 就选择这个.\n"
"  安装将自动进行, 非常简单, 您只需要回答很少的问题.\n"
"\n"
"\n"
"* 专家: 如果您精通 GNU/Linux, 您可以选择这个安装级别,  \n"
"就象在 \" 定制\"安装中一样, 您将可以选择系统的主要用途 \n"
" (工作站, 服务器或开发平台).  请非常小心的使用这个级别. \n"
"  您将可以定制系统的很多方面.  如果您对 GNU/Linux 没有很深入\n"
" 的了解, 您将很难回答某些问题.\n"
" 所以, 如果您不清楚会发生什么, 请不要选择这个级别."

#: ../../help.pm_.c:521
msgid ""
"Normally, DrakX selects the right keyboard for you (depending on the\n"
"language you have chosen) and you will not even see this step. However, you\n"
"might not have a keyboard that corresponds exactly to your language: for\n"
"example, if you are an English speaking Swiss person, you may still want\n"
"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
"located in Quebec, you may find yourself in the same situation. In both\n"
"cases, you will have to go back to this installation step and select an\n"
"appropriate keyboard from the list.\n"
"\n"
"Click on the \"More\" button to be presented with the complete list of\n"
"supported keyboards."
msgstr ""

#: ../../help.pm_.c:534
msgid ""
"Please choose your preferred language for installation and system usage.\n"
"\n"
"Clicking on the \"Advanced\" button will allow you to select other\n"
"languages to be installed on your workstation. Selecting other languages\n"
"will install the language-specific files for system documentation and\n"
"applications. For example, if you will host users from Spain on your\n"
"machine, select English as the main language in the tree view and in the\n"
"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
"\n"
"Note that multiple languages may be installed. Once you have selected any\n"
"additional locales click the \"OK\" button to continue."
msgstr ""

#: ../../help.pm_.c:547
msgid ""
"By default, DrakX assumes you have a two-button mouse and will set it up\n"
"for third-button emulation. DrakX will automatically know whether it is a\n"
"PS/2, serial or USB mouse.\n"
"\n"
"If you wish to specify a different type of mouse select the appropriate\n"
"type from the list provided.\n"
"\n"
"If you choose a mouse other than the default you will be presented with a\n"
"mouse test screen. Use the buttons and wheel to verify that the settings\n"
"are good. If the mouse is not working correctly press the space bar or\n"
"RETURN to \"Cancel\" and choose again."
msgstr ""

#: ../../help.pm_.c:560
msgid ""
"Please select the correct port. For example, the COM1 port under MS Windows\n"
"is named ttyS0 under GNU/Linux."
msgstr ""
"请选择正确的端口.  例如, \n"
"MS Windows 里的 COM1, 在 GNU/Linux 里面叫做 ttyS0."

#: ../../help.pm_.c:564
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"root\" is the system\n"
"administrator and is the only one authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
"choose not to enter a password, but we strongly advise you against this if\n"
"only for one reason: do not think that because you booted GNU/Linux that\n"
"your other operating systems are safe from mistakes. Since \"root\" can\n"
"overcome all limitations and unintentionally erase all data on partitions\n"
"by carelessly accessing the partitions themselves, it is important for it\n"
"to be difficult to become \"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password - it makes it too\n"
"easy to compromise a system.\n"
"\n"
"However, please do not make the password too long or complicated because\n"
"you must be able to remember it without too much effort.\n"
"\n"
"The password will not be displayed on screen as you type it in. Hence, you\n"
"will have to type the password twice to reduce the chance of a typing\n"
"error. If you do happen to make the same typing error twice, this\n"
"\"incorrect\" password will have to be used the first time you connect.\n"
"\n"
"In expert mode, you will be asked if you will be connecting to an\n"
"authentication server, like NIS or LDAP.\n"
"\n"
"If your network uses LDAP (or NIS) protocol for authentication, select\n"
"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
"network administrator.\n"
"\n"
"If your computer is not connected to any administrated network, you will\n"
"want to choose \"Local files\" for authentication."
msgstr ""

#: ../../help.pm_.c:600
msgid ""
"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
"accordingly, depending on what it finds here:\n"
"\n"
" * if Windows boot sector is found, it will replace it with a GRUB/LILO boot\n"
"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
"\n"
" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
"one;\n"
"\n"
"If in doubt, DrakX will display a dialog with various options.\n"
"\n"
" * \"Boot loader to use\": you have three choices:\n"
"\n"
"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
"interface.\n"
"\n"
"    * \"GRUB\": if you prefer GRUB (text menu).\n"
"\n"
"    * \"LILO with text menu\": if you prefer LILO with its text menu interface.\n"
"\n"
" * \"Boot device\": in most cases, you will not change the default\n"
"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
"\n"
" * \"Delay before booting the default image\": when rebooting the computer,\n"
"this is the delay granted to the user to choose - in the boot loader menu,\n"
"another boot entry than the default one.\n"
"\n"
"!! Beware that if you choose not to install a boot loader (by selecting\n"
"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
"Linux system! Also be sure you know what you do before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
"options, which are reserved to the expert user.\n"
"\n"
"Mandrake Linux installs its own boot loader, which will let you boot either\n"
"GNU/Linux or any other operating systems which you have on your system.\n"
"\n"
"If there is another operating system installed on your machine, it will be\n"
"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
"existing options. Double-clicking on an existing entry allows you to change\n"
"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
"on to the next installation step."
msgstr ""

#: ../../help.pm_.c:647
msgid ""
"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
"either GNU/Linux or any other operating system present on your computer.\n"
"Normally, these other operating systems are correctly detected and\n"
"installed. If this is not the case, you can add an entry by hand in this\n"
"screen. Be careful to choose the correct parameters.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone. In which case, you can delete the corresponding entries. But then,\n"
"you will need a boot disk in order to boot those other operating systems!"
msgstr ""
"LILO (LInux LOader 的缩写) 和 Grub 是开机启动程序: 开机时, 它们可以引导\n"
"您系统里的 GNU/Linux 和其他操作系统.  通常它能正确的察觉和安装现有的其他\n"
"操作系统. 如果不是这样, 您可以在这个界面手工添加新的项目. 请仔细选择\n"
"正确的参数.\n"
"\n"
"\n"
"您可能不希望让人使用这里列出的其他操作系统, 只要把有关的项目删除就好了.\n"
"可是您需要先准备开机软盘来引导它们."

#: ../../help.pm_.c:658
msgid ""
"You must indicate where you wish to place the information required to boot\n"
"to GNU/Linux.\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of drive\n"
"(MBR)\"."
msgstr ""
"请指定在哪里放置启动 GNU/Linux 的信息.\n"
"\n"
"选择\"硬盘的第一个扇区 (MBR)\", 除非您清楚其它选择的后果."

#: ../../help.pm_.c:665
msgid ""
"Here we select a printing system for your computer to use. Other OSes may\n"
"offer you one, but Mandrake offers three.\n"
"\n"
" * \"pdq\" - which means ``print, don't queue'', is the choice if you have a\n"
"direct connection to your printer and you want to be able to panic out of\n"
"printer jams, and you do not have any networked printers. It will handle\n"
"only very simple network cases and is somewhat slow for networks. Pick\n"
"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
"choices after install by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button.\n"
"\n"
" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
"your local printer and also halfway round the planet. It is simple and can\n"
"act like a server or a client for the ancient \"lpd\" printing system, so\n"
"it is compatible with the systems that went before. It can do many tricks,\n"
"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
"graphical front-ends for printing or choosing printer options.\n"
"\n"
" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
"approximately the same things the others can do, but it will print to\n"
"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
"it can print directly to shell commands. If you have need of Novell or\n"
"printing to commands without using a separate pipe construct, use lprNG.\n"
"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
"networks."
msgstr ""

#: ../../help.pm_.c:693
msgid ""
"DrakX is now detecting any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
"is found DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection will sometimes not detect a piece of hardware\n"
"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
"if you know that there is a SCSI card installed in your machine. You will\n"
"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
"no SCSI hardware. If you are unsure you can check the list of hardware\n"
"detected in your machine by selecting \"See hardware info\" and clicking\n"
"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
"return to the SCSI interface question.\n"
"\n"
"If you have to manually specify your adapter, DrakX will ask if you want to\n"
"specify options for it. You should allow DrakX to probe the hardware for\n"
"the card-specific options that the hardware needs to initialize. This\n"
"usually works well.\n"
"\n"
"If DrakX is not able to probe for the options that need to be passed, you\n"
"will need to manually provide options to the driver. Please review the\n"
"``User Guide'' (chapter 3, section \"Collecting information on your\n"
"hardware\") for hints on retrieving the parameters required from hardware\n"
"documentation, from the manufacturer's web site (if you have Internet\n"
"access) or from Microsoft Windows (if you used this hardware with Windows\n"
"on your system)."
msgstr ""
"DrakX 将要尝试寻找 IDE设备和 PCI SCSI 卡. \n"
"如果 DrakX 找到了 SCSI 卡并且知道该使用哪个驱动程序\n"
"它会自动安装.\n"
"\n"
"如果您没有 SCSI 卡, 或者有一个ISA SCSI 卡, 或者有一个\n"
" DrakX 不认识的 PCI SCSI 卡, 将询问您系统中是否有\n"
"SCSI. 如果没有, 您只需选择 '否'. \n"
"如果您回答 '是' 将列出一些可供选择的驱动程序, \n"
"您要从中挑选您的卡可以使用的驱动程序.\n"
"\n"
"\n"
"如果您不得不手工挑选驱动程序, DrakX 将提问l\n"
"您是否要指定特别的参数.  您最好让 DrakX 去探测硬件\n"
"以确定参数. 这个办法通常可以奏效.\n"
"\n"
"如果不成, 您只好自己提供驱动程序参数.\n"
"请查看 '用户指南', (第三章, Collective informations on your hardware)\n"
"那里提供了一些获取有关信息的方法, 如查看硬件文档,\n"
" 浏览制造商的网站 (如果您有办法上网)\n"
"或从 Windows 中获取有关的信息 (如果您的系统中有Windows)"

#: ../../help.pm_.c:720
msgid ""
"You can add additional entries for yaboot, either for other operating\n"
"systems, alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OS's, the entry consists only of a label and the root partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is simply the name you will have to type at the yaboot prompt\n"
"to select this boot option.\n"
"\n"
" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
"or a variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is used quite often\n"
"to assist in initializing video hardware, or to enable keyboard mouse\n"
"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
"Apple mouse. The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules, before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
"need to allocate a large ramdisk, this option can be used.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially brought up in\n"
"read-only, to allow a file system check before the system becomes \"live\".\n"
"Here, you can override this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in \"novideo\" mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
"selections."
msgstr "你可以输入Yaboot的附加信息."

#: ../../help.pm_.c:765
msgid ""
"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
"these other operating systems are correctly detected and installed. If this\n"
"is not the case, you can add an entry by hand in this screen. Be careful as\n"
"to choose the correct parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message that is displayed before the boot\n"
"prompt.\n"
"\n"
" * Boot Device: indicate where you want to place the information required to\n"
"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
"hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux.\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second before your\n"
"default kernel description is selected.\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose \"N\" for Open\n"
"Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""
"Yaboot是 NewWorld MacIntosh的开机引导系统, 可以引导 GNU/Linux, MacOS, 和 MacOSX.\n"
"\n"
"\n"
"Yaboot主要选项:\n"
"\n"
"\n"
"  - 初始信息: 开机引导信息.\n"
"\n"
"\n"
"  - 引导设备: 开机程序安装地.\n"
"\n"
"\n"
"  - 固件延迟: yaboot的开机延迟之一.\n"
"\n"
"\n"
"  - 核心引导延迟: 核心引导延迟.\n"
"\n"
"\n"
"  - 使能CD引导?: 'C' CD引导.\n"
"  - 使能OF引导?: 'N' 固件引导.\n"
"  - 却省操作系统: 固件却省引导的操作系统."

#: ../../help.pm_.c:798
msgid ""
"Here are presented various parameters concerning your machine. Depending on\n"
"your installed hardware, you may - or not, see the following entries:\n"
"\n"
" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
"button to change it if necessary.\n"
"\n"
" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
"click on the button to change that if necessary.\n"
"\n"
" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from the\n"
"language you have chosen. But here again, as for the choice of a keyboard,\n"
"you may not be in the country for which the chosen language should\n"
"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
"order to configure the clock according to the time zone you are in.\n"
"\n"
" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard.\n"
"\n"
" * \"Sound card\": if a sound card is detected on your system, it is\n"
"displayed here. No modification possible at installation time.\n"
"\n"
" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
"here. No modification possible at installation time.\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
"displayed here. You can click on the button to change the parameters\n"
"associated to it."
msgstr ""

#: ../../help.pm_.c:827
msgid ""
"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
"partition. Be careful, all data present on it will be lost and will not be\n"
"recoverable!"
msgstr ""
"选择硬盘您准备清空来安装 Mandrake分区.\n"
"注意，所有数据将丢失并且无法恢复."

#: ../../help.pm_.c:832
msgid ""
"Click on \"OK\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"Cancel\" to cancel this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"点击 \"确定\"删除该硬盘所有数据及分区.\n"
"注意，点击 \"确定\"后，您将无法恢复数据及分区(包括Windows数据).\n"
"\n"
"\n"
"点击 \"取消\"取消操作，数据及分区不会丢失."

#: ../../install2.pm_.c:114
#, c-format
msgid "Can't access kernel modules corresponding to your kernel (file %s is missing)"
msgstr "无法访问相应核心的核心模块(找不到 %s文件)"

#: ../../install_any.pm_.c:421
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new could be found. In that case, you must make sure to upgrade\n"
"as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
""
msgstr ""
"您选择了以下服务程序: %s\n"
"\n"
"\n"
"这些服务却省会被激活。它们没有已知的安全问题，但可能会新发现。\n"
"如果发现，你得立即升级.\n"
"\n"
"\n"
"果真安装这些服务?\n"
""

#: ../../install_any.pm_.c:457
msgid "Can't use broadcast with no NIS domain"
msgstr "没有NIS域， 无法使用广播"

#: ../../install_any.pm_.c:793
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "请插入一张DOS软盘到驱动器 %s"

#: ../../install_any.pm_.c:797
msgid "This floppy is not FAT formatted"
msgstr "不是DOS格式的软盘"

#: ../../install_any.pm_.c:809
msgid "To use this saved packages selection, boot installation with ``linux defcfg=floppy''"
msgstr "使用保存的软件包选择, 以''linux defcfg=floppy''启动"

#: ../../install_any.pm_.c:831
#: ../../partition_table.pm_.c:737
#, c-format
msgid "Error reading file %s"
msgstr "请取文件 %s 出错 "

#: ../../install_gtk.pm_.c:84
#: ../../install_steps_gtk.pm_.c:325
#: ../../interactive.pm_.c:107
#: ../../interactive.pm_.c:122
#: ../../interactive.pm_.c:286
#: ../../interactive.pm_.c:308
#: ../../interactive_http.pm_.c:104
#: ../../interactive_newt.pm_.c:170
#: ../../interactive_stdio.pm_.c:27
#: ../../my_gtk.pm_.c:415
#: ../../my_gtk.pm_.c:716
#: ../../my_gtk.pm_.c:738
msgid "Ok"
msgstr "确定"

#: ../../install_interactive.pm_.c:23
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"您系统中的部分硬件需要 '专有' 的驱动程序才能工作. \n"
"有关它们的情况, 请您查看: %s"

#: ../../install_interactive.pm_.c:44
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"必须指定一个根分区.\n"
"请先创建一个 Linux 分区 (或在图中点击现有的一个).\n"
"然后在列表里选择 \"装载点\", 设为 '/'."

#: ../../install_interactive.pm_.c:49
#: ../../install_steps_graphical.pm_.c:259
msgid "You must have a swap partition"
msgstr "您必须有一个交换分区"

#: ../../install_interactive.pm_.c:50
#: ../../install_steps_graphical.pm_.c:261
msgid ""
"You don't have a swap partition\n"
"\n"
"Continue anyway?"
msgstr ""
"您还没有交换分区\n"
"\n"
"要继续吗?"

#: ../../install_interactive.pm_.c:53
#: ../../install_steps.pm_.c:165
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "您必须有一个FAT分区 载入 /boot/efi"

#: ../../install_interactive.pm_.c:76
msgid "Use free space"
msgstr "使用空闲空间"

#: ../../install_interactive.pm_.c:78
msgid "Not enough free space to allocate new partitions"
msgstr "没有足够空闲空间分配给新分区"

#: ../../install_interactive.pm_.c:86
msgid "Use existing partition"
msgstr "使用现存的分区"

#: ../../install_interactive.pm_.c:88
msgid "There is no existing partition to use"
msgstr "现存的分区无法使用"

#: ../../install_interactive.pm_.c:95
msgid "Use the Windows partition for loopback"
msgstr "利用 Windows 分区进行回送"

#: ../../install_interactive.pm_.c:98
msgid "Which partition do you want to use for Linux4Win?"
msgstr "请问您要在哪一个分区里放 Linux4Win?"

#: ../../install_interactive.pm_.c:100
msgid "Choose the sizes"
msgstr "选择大小"

#: ../../install_interactive.pm_.c:101
msgid "Root partition size in MB: "
msgstr "根分区大小(MB): "

#: ../../install_interactive.pm_.c:102
msgid "Swap partition size in MB: "
msgstr "对换分区大小 (MB): "

#: ../../install_interactive.pm_.c:111
msgid "Use the free space on the Windows partition"
msgstr "使用在 Windows 分区上的空闲空间"

#: ../../install_interactive.pm_.c:114
msgid "Which partition do you want to resize?"
msgstr "您需要改变哪个分区的大小?"

#: ../../install_interactive.pm_.c:116
msgid "Computing Windows filesystem bounds"
msgstr "计算 Windows 文件系统的边界"

#: ../../install_interactive.pm_.c:119
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"改变 FAT 分区大小的程序无法处理这个分区, \n"
"发生了如下错误: %s"

#: ../../install_interactive.pm_.c:122
msgid "Your Windows partition is too fragmented, please run ``defrag'' first"