- 'ATTACH_MAX_FILESIZE_EXPLAIN' => 'Maximum size of each file, with 0 being unlimited.',

- 'ACP_BAN_EXPLAIN' => 'Here you can control the banning of users by name, IP or e-mail address. These methods prevent a user reaching any part of the board. You can give a short (maximum 3000 characters) reason for the ban if you wish. This will be displayed in the admin log. The duration of a ban can also be specified. If you want the ban to end on a specific date rather than after a set time period select <span style="text-decoration: underline;">Until -&gt;</span> for the ban length and enter a date in <kbd>YYYY-MM-DD</kbd> format.',

- 'EMAIL_BAN' => 'Ban one or more e-mail addresses',

- 'EMAIL_BAN_EXCLUDE_EXPLAIN' => 'Enable this to exclude the entered e-mail address from all current bans.',

- 'EMAIL_BAN_EXPLAIN' => 'To specify more than one e-mail address enter each on a new line. To match partial addresses use * as the wildcard, e.g. <samp>*@hotmail.com</samp>, <samp>*@*.domain.tld</samp>, etc.',

- 'EMAIL_NO_BANNED' => 'No banned e-mail addresses',

- 'EMAIL_UNBAN' => 'Un-ban or un-exclude e-mails',

- 'EMAIL_UNBAN_EXPLAIN' => 'You can unban (or un-exclude) multiple e-mail addresses in one go using the appropriate combination of mouse and keyboard for your computer and browser. Excluded e-mail addresses are emphasised.',

- 'SYSTEM_DST' => 'Enable Summer Time/<abbr title="Daylight Saving Time">DST</abbr>',

- 'WARNINGS_EXPIRE_EXPLAIN' => 'Number of days that will elapse before the warning will automatically expire from a user’s record. Set this value to 0 to make warnings permanent.',

- 'MAX_FILESIZE_EXPLAIN' => 'For uploaded avatar files.',

- 'ACC_ACTIVATION_EXPLAIN' => 'This determines whether users have immediate access to the board or if confirmation is required. You can also completely disable new registrations. “Board-wide e-mail” must be enabled in order to use user or admin activation.',

- 'ACC_USER' => 'By user (e-mail verification)',

- 'ALLOW_EMAIL_REUSE' => 'Allow e-mail address re-use',

- 'ALLOW_EMAIL_REUSE_EXPLAIN' => 'Different users can register with the same e-mail address.',

- 'LDAP_EMAIL' => 'LDAP e-mail attribute',

- 'LDAP_EMAIL_EXPLAIN' => 'Set this to the name of your user entry e-mail attribute (if one exists) in order to automatically set the e-mail address for new users. Leaving this empty results in empty e-mail address for users who log in for the first time.',

- 'LDAP_NO_EMAIL' => 'The specified e-mail attribute does not exist.',

- 'ACP_SERVER_SETTINGS_EXPLAIN' => 'Here you define server and domain dependant settings. Please ensure the data you enter is accurate, errors will result in e-mails containing incorrect information. When entering the domain name remember it does include http:// or other protocol term. Only alter the port number if you know your server uses a different value, port 80 is correct in most cases.',

- 'EMAIL_CHECK_MX' => 'Check e-mail domain for valid MX record',

- 'EMAIL_CHECK_MX_EXPLAIN' => 'If enabled, the e-mail domain provided on registration and profile changes is checked for a valid MX record.',

- 'ACP_EMAIL_SETTINGS_EXPLAIN' => 'This information is used when the board sends e-mails to your users. Please ensure the e-mail address you specify is valid, any bounced or undeliverable messages will likely be sent to that address. If your host does not provide a native (PHP based) e-mail service you can instead send messages directly using SMTP. This requires the address of an appropriate server (ask your provider if necessary). If the server requires authentication (and only if it does) enter the necessary username, password and authentication method.',

-

- 'ADMIN_EMAIL' => 'Return e-mail address',

- 'ADMIN_EMAIL_EXPLAIN' => 'This will be used as the return address on all e-mails, the technical contact e-mail address. It will always be used as the <samp>Return-Path</samp> and <samp>Sender</samp> address in e-mails.',

- 'BOARD_EMAIL_FORM' => 'Users send e-mail via board',

- 'BOARD_EMAIL_FORM_EXPLAIN' => 'Instead of showing the users e-mail address users are able to send e-mails via the board.',

- 'BOARD_HIDE_EMAILS' => 'Hide e-mail addresses',

- 'BOARD_HIDE_EMAILS_EXPLAIN' => 'This function keeps e-mail addresses completely private.',

- 'CONTACT_EMAIL' => 'Contact e-mail address',

- 'CONTACT_EMAIL_EXPLAIN' => 'This address will be used whenever a specific contact point is needed, e.g. spam, error output, etc. It will always be used as the <samp>From</samp> and <samp>Reply-To</samp> address in e-mails.',

- 'EMAIL_FUNCTION_NAME' => 'E-mail function name',

- 'EMAIL_FUNCTION_NAME_EXPLAIN' => 'The e-mail function used to send mails through PHP.',

- 'EMAIL_PACKAGE_SIZE' => 'E-mail package size',

- 'EMAIL_PACKAGE_SIZE_EXPLAIN' => 'This is the number of maximum e-mails sent out in one package. This setting is applied to the internal message queue; set this value to 0 if you have problems with non-delivered notification e-mails.',

- 'EMAIL_SIG' => 'E-mail signature',

- 'EMAIL_SIG_EXPLAIN' => 'This text will be attached to all e-mails the board sends.',

- 'ENABLE_EMAIL' => 'Enable board-wide e-mails',

- 'ENABLE_EMAIL_EXPLAIN' => 'If this is set to disabled no e-mails will be sent by the board at all. <em>Note the user and admin account activation settings require this setting to be enabled. If currently using “user” or “admin” activation in the activation settings, disabling this setting will require no activation of new accounts.</em>',

- 'USE_SMTP' => 'Use SMTP server for e-mail',

- 'USE_SMTP_EXPLAIN' => 'Select “Yes” if you want or have to send e-mail via a named server instead of the local mail function.',

- 'ACP_BAN_EMAILS' => 'Ban e-mails',

- 'ACP_EMAIL_SETTINGS' => 'E-mail settings',

- 'ACP_MASS_EMAIL' => 'Mass e-mail',

- 'NO_EMAILS_DEFINED' => 'No valid e-mail addresses found.',

- 'ACP_CRITICAL_LOGS_EXPLAIN' => 'This lists the actions carried out by the board itself. This log provides you with information you are able to use for solving specific problems, for example non-delivery of e-mails. You can sort by username, date, IP or action. If you have appropriate permissions you can also clear individual operations or the log as a whole.',

- 'INACTIVE_USERS_EXPLAIN' => 'This is a list of users who have registered but whose accounts are inactive. You can activate, delete or remind (by sending an e-mail) these users if you wish.',

- 'INACTIVE_USERS_EXPLAIN_INDEX' => 'This is a list of the last 10 registered users who have inactive accounts. Accounts are inactive either because account activation was enabled in user registration settings and these users’ accounts have not yet been activated, or because these accounts have been deactivated. A full list is available by following the link below from where you can activate, delete or remind (by sending an e-mail) these users if you wish.',

- 'LOG_BAN_EXCLUDE_EMAIL' => '<strong>Excluded e-mail from ban</strong> for reason “<em>%1$s</em>”<br />» %2$s',

- 'LOG_BAN_EMAIL' => '<strong>Banned e-mail</strong> for reason “<em>%1$s</em>”<br />» %2$s',

- 'LOG_UNBAN_EMAIL' => '<strong>Unbanned e-mail</strong><br />» %s',

- 'LOG_CONFIG_EMAIL' => '<strong>Altered e-mail settings</strong>',

- 'LOG_ERROR_EMAIL' => '<strong>E-mail error</strong><br />» %s',

- 'LOG_INACTIVE_REMIND' => '<strong>Sent reminder e-mails to inactive users</strong><br />» %s',

- 'LOG_MASS_EMAIL' => '<strong>Sent mass e-mail</strong><br />» %s',

- 'LOG_USER_BAN_EMAIL' => '<strong>Banned e-mail via user management</strong> for reason “<em>%1$s</em>”<br />» %2$s',

- 'LOG_USER_UPDATE_EMAIL' => '<strong>User “%1$s” changed e-mail</strong><br />» from “%2$s” to “%3$s”',

- 'ACP_MASS_EMAIL_EXPLAIN' => 'Here you can e-mail a message to either all of your users or all users of a specific group <strong>having the option to receive mass e-mails enabled</strong>. To achieve this an e-mail will be sent out to the administrative e-mail address supplied, with a blind carbon copy sent to all recipients. The default setting is to only include 50 recipients in such an e-mail, for more recipients more e-mails will be sent. If you are emailing a large group of people please be patient after submitting and do not stop the page halfway through. It is normal for a mass emailing to take a long time, you will be notified when the script has completed.',

- 'EMAIL_SEND_ERROR' => 'There were one or more errors while sending the e-mail. Please check the %sError log%s for detailed error messages.',

- 'MAIL_BANNED_EXPLAIN' => 'When sending a mass e-mail to a group you can select here whether banned users will also receive the e-mail.',

- 'EMAIL_FILES' => 'E-mail templates',

- 'ROLE_DESCRIPTION_USER_LIMITED' => 'Can access some of the user features. Attachments, e-mails, or instant messages are not allowed.',

- 'acl_u_chgemail' => array('lang' => 'Can change e-mail address', 'cat' => 'profile'),

- 'acl_u_pm_emailpm' => array('lang' => 'Can e-mail private messages', 'cat' => 'pm'),

- 'acl_u_sendemail' => array('lang' => 'Can send e-mails', 'cat' => 'misc'),

- 'acl_f_list' => array('lang' => 'Can see forum', 'cat' => 'post'),

- 'acl_f_read' => array('lang' => 'Can read forum', 'cat' => 'post'),

- 'acl_f_reply' => array('lang' => 'Can reply to topics', 'cat' => 'post'),

- 'acl_f_icons' => array('lang' => 'Can use topic/post icons', 'cat' => 'post'),

- 'acl_f_announce' => array('lang' => 'Can post announcements', 'cat' => 'post'),

-

- 'acl_f_attach' => array('lang' => 'Can attach files', 'cat' => 'content'),

- 'acl_f_download' => array('lang' => 'Can download files', 'cat' => 'content'),

- 'acl_f_sigs' => array('lang' => 'Can use signatures', 'cat' => 'content'),

- 'acl_f_bbcode' => array('lang' => 'Can use BBCode', 'cat' => 'content'),

- 'acl_f_smilies' => array('lang' => 'Can use smilies', 'cat' => 'content'),

- 'acl_f_img' => array('lang' => 'Can use [img] BBCode tag', 'cat' => 'content'),

- 'acl_f_flash' => array('lang' => 'Can use [flash] BBCode tag', 'cat' => 'content'),

-

- 'acl_f_edit' => array('lang' => 'Can edit own posts', 'cat' => 'actions'),

- 'acl_f_delete' => array('lang' => 'Can delete own posts', 'cat' => 'actions'),

- 'acl_f_user_lock' => array('lang' => 'Can lock own topics', 'cat' => 'actions'),

- 'acl_f_bump' => array('lang' => 'Can bump topics', 'cat' => 'actions'),

- 'acl_f_report' => array('lang' => 'Can report posts', 'cat' => 'actions'),

- 'acl_f_subscribe' => array('lang' => 'Can subscribe forum', 'cat' => 'actions'),

- 'acl_f_print' => array('lang' => 'Can print topics', 'cat' => 'actions'),

- 'acl_f_email' => array('lang' => 'Can e-mail topics', 'cat' => 'actions'),

-

- 'acl_f_search' => array('lang' => 'Can search the forum', 'cat' => 'misc'),

- 'acl_f_ignoreflood' => array('lang' => 'Can ignore flood limit', 'cat' => 'misc'),

- 'acl_f_postcount' => array('lang' => 'Increment post counter<br /><em>Please note that this setting only affects new posts.</em>', 'cat' => 'misc'),

- 'acl_f_noapprove' => array('lang' => 'Can post without approval', 'cat' => 'misc'),

- 'acl_a_email' => array('lang' => 'Can send mass e-mail', 'cat' => 'misc'),

- 'EMAIL' => 'A valid e-mail address',

- 'FULLTEXT_MYSQL_INCOMPATIBLE_VERSION' => 'The MySQL fulltext backend can only be used with MySQL4 and above.',

- 'FULLTEXT_MYSQL_MBSTRING' => 'Support for non-latin UTF-8 characters using mbstring:',

- 'FULLTEXT_MYSQL_PCRE' => 'Support for non-latin UTF-8 characters using PCRE:',

- 'FULLTEXT_MYSQL_MBSTRING_EXPLAIN' => 'If PCRE does not have unicode character properties, the search backend will try to use mbstring’s regular expression engine.',

- 'FULLTEXT_MYSQL_PCRE_EXPLAIN' => 'This search backend requires PCRE unicode character properties, only available in PHP 4.4, 5.1 and above, if you want to search for non-latin characters.',

- 'IMG_ICON_CONTACT_EMAIL' => 'Send e-mail',

-

- 'CONFIRM_EMAIL_EXPLAIN' => 'You only need to specify this if you are changing the users e-mail address.',

- 'DELETE_USER_EXPLAIN' => 'Please note that deleting a user is final, they cannot be recovered.',

- 'USER_ADMIN_BAN_EMAIL' => 'Ban by e-mail',

- 'USER_ADMIN_BAN_EMAIL_REASON' => 'E-mail address banned via user management',