From d155ce63495389d4f796bd276a734a5ac2583f0f Mon Sep 17 00:00:00 2001 From: Papoteur Date: Thu, 11 Mar 2021 19:05:07 +0100 Subject: Adding or refreshing mcc in da --- mcc/8/da/content/draft.png | Bin 0 -> 16150 bytes mcc/8/da/content/images/drakgw-net.png | Bin 0 -> 63848 bytes .../content/images/draknetcenterEthernet-off.png | Bin 0 -> 1468 bytes .../da/content/images/draknetcenterEthernet-on.png | Bin 0 -> 1396 bytes .../content/images/draknetcenterWireless-off.png | Bin 0 -> 922 bytes .../da/content/images/draknetcenterWireless-on.png | Bin 0 -> 934 bytes mcc/8/da/content/images/rpmdrake2.png | Bin 0 -> 1008 bytes mcc/8/da/content/images/rpmdrake3.png | Bin 0 -> 893 bytes mcc/8/da/content/images/rpmdrake4.png | Bin 0 -> 869 bytes mcc/8/da/content/images/rpmdrake5.png | Bin 0 -> 1298 bytes mcc/8/da/content/images/rpmdrake6.png | Bin 0 -> 974 bytes mcc/8/da/content/index.html | 40 ++ mcc/8/da/content/main.js | 179 ++++++ mcc/8/da/content/mcc-boot.html | 113 ++++ mcc/8/da/content/mcc-hardware.html | 295 ++++++++++ mcc/8/da/content/mcc-intro.html | 42 ++ mcc/8/da/content/mcc-localdisks.html | 89 +++ mcc/8/da/content/mcc-network.html | 247 ++++++++ mcc/8/da/content/mcc-networkservices.html | 121 ++++ mcc/8/da/content/mcc-networksharing.html | 150 +++++ mcc/8/da/content/mcc-security.html | 215 +++++++ mcc/8/da/content/mcc-sharing.html | 86 +++ mcc/8/da/content/mcc-system.html | 193 +++++++ mcc/8/da/content/nwSearchFnt.js | 524 +++++++++++++++++ mcc/8/da/content/otherMageiaTools.html | 64 +++ mcc/8/da/content/search/default.props | 1 + mcc/8/da/content/search/en-us.props | 45 ++ mcc/8/da/content/search/es-es.props | 179 ++++++ mcc/8/da/content/search/htmlFileInfoList.js | 13 + mcc/8/da/content/search/htmlFileList.js | 14 + mcc/8/da/content/search/index-1.js | 639 +++++++++++++++++++++ mcc/8/da/content/search/index-2.js | 638 ++++++++++++++++++++ mcc/8/da/content/search/index-3.js | 634 ++++++++++++++++++++ mcc/8/da/content/search/ja-jp.props | 1 + mcc/8/da/content/search/nwSearchFnt.js | 513 +++++++++++++++++ mcc/8/da/content/search/punctuation.props | 31 + mcc/8/da/content/search/stemmers/de_stemmer.js | 247 ++++++++ mcc/8/da/content/search/stemmers/en_stemmer.js | 187 ++++++ mcc/8/da/content/search/stemmers/fr_stemmer.js | 299 ++++++++++ mcc/8/da/content/software-management.html | 169 ++++++ mcc/8/da/content/webhelp-custom.css | 229 ++++++++ mcc/8/da/content/webhelp-default.css | 92 +++ 42 files changed, 6289 insertions(+) create mode 100644 mcc/8/da/content/draft.png create mode 100644 mcc/8/da/content/images/drakgw-net.png create mode 100644 mcc/8/da/content/images/draknetcenterEthernet-off.png create mode 100644 mcc/8/da/content/images/draknetcenterEthernet-on.png create mode 100644 mcc/8/da/content/images/draknetcenterWireless-off.png create mode 100644 mcc/8/da/content/images/draknetcenterWireless-on.png create mode 100644 mcc/8/da/content/images/rpmdrake2.png create mode 100644 mcc/8/da/content/images/rpmdrake3.png create mode 100644 mcc/8/da/content/images/rpmdrake4.png create mode 100644 mcc/8/da/content/images/rpmdrake5.png create mode 100644 mcc/8/da/content/images/rpmdrake6.png create mode 100644 mcc/8/da/content/index.html create mode 100644 mcc/8/da/content/main.js create mode 100644 mcc/8/da/content/mcc-boot.html create mode 100644 mcc/8/da/content/mcc-hardware.html create mode 100644 mcc/8/da/content/mcc-intro.html create mode 100644 mcc/8/da/content/mcc-localdisks.html create mode 100644 mcc/8/da/content/mcc-network.html create mode 100644 mcc/8/da/content/mcc-networkservices.html create mode 100644 mcc/8/da/content/mcc-networksharing.html create mode 100644 mcc/8/da/content/mcc-security.html create mode 100644 mcc/8/da/content/mcc-sharing.html create mode 100644 mcc/8/da/content/mcc-system.html create mode 100644 mcc/8/da/content/nwSearchFnt.js create mode 100644 mcc/8/da/content/otherMageiaTools.html create mode 100644 mcc/8/da/content/search/default.props create mode 100644 mcc/8/da/content/search/en-us.props create mode 100644 mcc/8/da/content/search/es-es.props create mode 100644 mcc/8/da/content/search/htmlFileInfoList.js create mode 100644 mcc/8/da/content/search/htmlFileList.js create mode 100644 mcc/8/da/content/search/index-1.js create mode 100644 mcc/8/da/content/search/index-2.js create mode 100644 mcc/8/da/content/search/index-3.js create mode 100644 mcc/8/da/content/search/ja-jp.props create mode 100644 mcc/8/da/content/search/nwSearchFnt.js create mode 100644 mcc/8/da/content/search/punctuation.props create mode 100644 mcc/8/da/content/search/stemmers/de_stemmer.js create mode 100644 mcc/8/da/content/search/stemmers/en_stemmer.js create mode 100644 mcc/8/da/content/search/stemmers/fr_stemmer.js create mode 100644 mcc/8/da/content/software-management.html create mode 100644 mcc/8/da/content/webhelp-custom.css create mode 100644 mcc/8/da/content/webhelp-default.css (limited to 'mcc/8/da/content') diff --git a/mcc/8/da/content/draft.png b/mcc/8/da/content/draft.png new file mode 100644 index 00000000..59673fe1 Binary files /dev/null and b/mcc/8/da/content/draft.png differ diff --git a/mcc/8/da/content/images/drakgw-net.png b/mcc/8/da/content/images/drakgw-net.png new file mode 100644 index 00000000..5867d56e Binary files /dev/null and b/mcc/8/da/content/images/drakgw-net.png differ diff --git a/mcc/8/da/content/images/draknetcenterEthernet-off.png b/mcc/8/da/content/images/draknetcenterEthernet-off.png new file mode 100644 index 00000000..ca156174 Binary files /dev/null and b/mcc/8/da/content/images/draknetcenterEthernet-off.png differ diff --git a/mcc/8/da/content/images/draknetcenterEthernet-on.png b/mcc/8/da/content/images/draknetcenterEthernet-on.png new file mode 100644 index 00000000..0e3ddda6 Binary files /dev/null and b/mcc/8/da/content/images/draknetcenterEthernet-on.png differ diff --git a/mcc/8/da/content/images/draknetcenterWireless-off.png b/mcc/8/da/content/images/draknetcenterWireless-off.png new file mode 100644 index 00000000..bda3b94f Binary files /dev/null and b/mcc/8/da/content/images/draknetcenterWireless-off.png differ diff --git a/mcc/8/da/content/images/draknetcenterWireless-on.png b/mcc/8/da/content/images/draknetcenterWireless-on.png new file mode 100644 index 00000000..e9bfacdc Binary files /dev/null and b/mcc/8/da/content/images/draknetcenterWireless-on.png differ diff --git a/mcc/8/da/content/images/rpmdrake2.png b/mcc/8/da/content/images/rpmdrake2.png new file mode 100644 index 00000000..cf0777cc Binary files /dev/null and b/mcc/8/da/content/images/rpmdrake2.png differ diff --git a/mcc/8/da/content/images/rpmdrake3.png b/mcc/8/da/content/images/rpmdrake3.png new file mode 100644 index 00000000..cd302f31 Binary files /dev/null and b/mcc/8/da/content/images/rpmdrake3.png differ diff --git a/mcc/8/da/content/images/rpmdrake4.png b/mcc/8/da/content/images/rpmdrake4.png new file mode 100644 index 00000000..8cfea7fb Binary files /dev/null and b/mcc/8/da/content/images/rpmdrake4.png differ diff --git a/mcc/8/da/content/images/rpmdrake5.png b/mcc/8/da/content/images/rpmdrake5.png new file mode 100644 index 00000000..3b4dd1eb Binary files /dev/null and b/mcc/8/da/content/images/rpmdrake5.png differ diff --git a/mcc/8/da/content/images/rpmdrake6.png b/mcc/8/da/content/images/rpmdrake6.png new file mode 100644 index 00000000..47643240 Binary files /dev/null and b/mcc/8/da/content/images/rpmdrake6.png differ diff --git a/mcc/8/da/content/index.html b/mcc/8/da/content/index.html new file mode 100644 index 00000000..f686b1df --- /dev/null +++ b/mcc/8/da/content/index.html @@ -0,0 +1,40 @@ + + + + + Mageia kontrolcenter

The texts and screenshots in this manual are available under the CC BY-SA +3.0 license http://creativecommons.org/licenses/by-sa/3.0/. +

This manual was produced with the help of the Calenco CMS developed by NeoDoc. +

It was written by volunteers in their free time. Please contact Documentation +Team, if you would like to help improve this manual.

Indhold

About the Manual for the Mageia Control Center
Administration +af programmer
Software Management (Install and Remove Software)
Opdatering af programpakker
Konfigurér frekvens for opdateringer
Configure Media
Fildeling
Konfigurér FTP
Configure webserver
Netværkstjenester
Konfigurér DHCP
Konfigurér DNS
Konfigurér proxy
Konfigurér tid
OpenSSH-serverkonfiguration
Hardware
Hardware configuration
Konfiguration af lyd
3D Desktop Effects
Opsætning af grafisk server
Set up the Keyboard Layout
Opsætning af peger-enheden (mus, museplade)
Install and configure a printer
Opsætning af skannere
Opsætning af UPS for overvågning af strømforsyning
Network and Internet
Netværkscenter
Opsætning af et nyt netværksgrænseflade (LAN, ISDN, ADSL, ...)
Fjern en forbindelse
Proxy
Del internetforbindelsen med andre lokale maskiner
Administrér forskellige netværksprofiler
Configure VPN Connection to secure network access
Definition af værter
System
Godkendelse
Administrér systemtjenester ved at aktivere eller deaktivere dem
Administér, tilføj og fjern skrifttyper. Importér Windows ®-skrifttyper
Håndtér dato og tid
Administrér sprogtilpasning for dit system
Vis og søg i systemlogger
Åbn en konsol som administrator
Brugere og grupper
Importér Windows®-dokumenter og -indstillinger
Øjebliksbilleder
Netværksdeling
Adgang til Windows (SMB) delte drev og kataloger
Share directories and drives with Samba
Adgang til NFS-delte drev og kataloger
Del drev og kataloger med NFS
Adgang til WebDAV-delte drev og kataloger
Lokal diske
Administrér diskpartitioner
CD/DVD burner
Del dine partitioner på disken
Sikkerhed
MSEC: Systemsikkerhed og overvågning
Opsætning af personlig brandmur
Konfigurér autentifikation for Mageia-værktøjer
Avanceret opsætning af netværksgrænseflader og brandmur
Styring for forældre
Opstart
Opsæt automatisk login til automatisk at logge ind
Opsæt opstart af system
Opsætning af Indlogningshåndtering
Other Mageia Tools
Mageia Bug Report Tool
Collect Logs and System Information for Bug Reports
Display Available NFS And SMB Shares
Display Your PCI, USB and PCMCIA Information
© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
   næste
loading table of contents...
diff --git a/mcc/8/da/content/main.js b/mcc/8/da/content/main.js new file mode 100644 index 00000000..011818d1 --- /dev/null +++ b/mcc/8/da/content/main.js @@ -0,0 +1,179 @@ +/** + * Miscellaneous js functions for WebHelp + * Kasun Gajasinghe, http://kasunbg.blogspot.com + * David Cramer, http://www.thingbag.net + * + */ + +$(document).ready(function() { + // $("#showHideHighlight").button(); //add jquery button styling to 'Go' button + //Generate tabs in nav-pane with JQuery + $(function() { + $("#tabs").tabs({ + cookie: { + // store cookie for 2 days. + expires: 2 + } + }); + }); + + //Generate the tree + $("#ulTreeDiv").css("display","block"); + $("#tree").treeview({ + collapsed: true, + animated: "medium", + control: "#sidetreecontrol", + persist: "cookie" + }); + + //after toc fully styled, display it. Until loading, a 'loading' image will be displayed + $("#tocLoading").css("display", "none"); + //$("#ulTreeDiv").attr("style","display:block;"); + + //.searchButton is the css class applied to 'Go' button + $(function() { + $("button", ".searchButton").button(); + + $("button", ".searchButton").click(function() {return false;}); + }); + + //'ui-tabs-1' is the cookie name which is used for the persistence of the tabs.(Content/Search tab) + if ($.cookie('ui-tabs-1') === '1') { //search tab is visible + if ($.cookie('textToSearch') != undefined && $.cookie('textToSearch').length > 0) { + document.getElementById('textToSearch').value = $.cookie('textToSearch'); + Verifie('diaSearch_Form'); + searchHighlight($.cookie('textToSearch')); + //$("#showHideHighlight").css("display","block"); + } + } + + syncToc(); //Synchronize the toc tree with the content pane, when loading the page. + //$("#doSearch").button(); //add jquery button styling to 'Go' button +}); + +/** + * Synchronize with the tableOfContents + */ +function syncToc(){ + var a = document.getElementById("webhelp-currentid"); + if (a != undefined) { + var b = a.getElementsByTagName("span")[0]; + + + if (b != undefined) { + //Setting the background for selected node. + //b.setAttribute("style", "color: white; background-color: #a7a9ac;"); + b.style.color = "#FFFFFF"; + b.style.backgroundColor = "#a7a9ac"; + } + + //shows the node related to current content. + //goes a recursive call from current node to ancestor nodes, displaying all of them. + while (a.parentNode && a.parentNode.nodeName) { + var parentNode = a.parentNode; + var nodeName = parentNode.nodeName; + + if (nodeName.toLowerCase() == "ul") { + parentNode.style.display = "block"; + + // Expand the current entry + var u = a.getElementsByTagName("ul")[0]; + if (u) { + u.style.display = "block"; + } + } else if (nodeName.toLocaleLowerCase() == "li") { + parentNode.setAttribute("class", "collapsable"); + parentNode.firstChild.setAttribute("class", "hitarea collapsable-hitarea "); + } + a = parentNode; + } + + if (b != undefined) { + b.scrollIntoView(); + } + } +} + +/** + * Code for Show/Hide TOC + * + */ +function showHideToc() { + var showHideButton = $("#showHideButton"); + var leftNavigation = $("#leftnavigation"); + var content = $("#content"); + + if (showHideButton != undefined && showHideButton.hasClass("pointLeft")) { + //Hide TOC + showHideButton.removeClass('pointLeft').addClass('pointRight'); + content.css("margin", "0 0 0 0"); + leftNavigation.css("display","none"); + showHideButton.attr("title", "Show table of contents"); + } else { + //Show the TOC + showHideButton.removeClass('pointRight').addClass('pointLeft'); + content.css("margin", "0 0 0 315px"); + leftNavigation.css("display","block"); + showHideButton.attr("title", "Hide table of contents"); + } +} + +/** + * Code for searh highlighting + */ +var highlightOn = true; +function searchHighlight(searchText) { + highlightOn = true; + if (searchText != undefined) { + var wList; + var sList = new Array(); //stem list + //Highlight the search terms + searchText = searchText.toLowerCase().replace(/<\//g, "_st_").replace(/\$_/g, "_di_").replace(/\.|%2C|%3B|%21|%3A|@|\/|\*/g, " ").replace(/(%20)+/g, " ").replace(/_st_/g, " + + + + Opstart

Opstart

In this screen you can choose between several tools to configure your boot +steps. Click on a link below to learn more.

Konfigurér opstarts-trin

  1. “Opsæt automatisk login til automatisk at logge ind”

  2. “Opsæt opstart af system”

  3. “Opsætning af Indlogningshåndtering”

Opsæt automatisk login til automatisk at logge ind

drakautologin

This tool[47] allows you to automatically +login the same user, in her/his desktop environment, without asking for any +password. It's called autologin. This is generally a good idea when there +is only one user like to be using the machine.

It is found under the Boot tab in the +Mageia Control Center labelled "Set up autologin to automatically log in".

The interface buttons are pretty obvious:

Check Launch the graphical environment when your system +starts, if you want X Window System to be executed after the +boot. If not, the system will start in text mode. Nevertheless, it will be +possible to launch the graphic interface manually. This can be done by +launching the command 'startx' or 'systemctl start dm'.

If the first box is checked, two other options are available, check either +No, I don't want autologin, if you want the system to +continue to ask for which user to connect (and password) or check +Yes, I want autologin with this (user, desktop), if +needed. In this case, you also need to supply the Default +username and the Default desktop.

Opsæt opstart af system

drakboot

If you are using a UEFI system instead of BIOS, the user interface is +slightly different as the boot device is obviously the EFI system Partition +(ESP).

This tool[48] allows you to configure the +boot options (choice of the bootloader, set a password, the default boot, +etc.)

It is found under the Boot tab in the Mageia Control Center labeled "Set up +boot system".

Advarsel

Don't use this tool if you don't know exactly what you are doing. Changing +some settings may prevent your machine from booting again !

In the first part, called Bootloader, it is possible if +using BIOS, to choose which Bootloader to use, Grub, +Grub2 or Lilo, and with a graphical or a text menu. It is just a question +of taste, there are no other consequences. You can also set the +Boot device, don't change anything here unless you +are an expert. The boot device is where the bootloader is installed and any +modification can prevent your machine from booting.

In a UEFI system, the bootloader is Grub2-efi and is +installed in /boot/EFI partition. This FAT32 formatted partition is common +to all operating systems installed.

In the second part, called Main options, you can set +the Delay before booting default image, in +seconds. During this delay, Grub or Lilo will display the list of available +operating systems, prompting you to make your choice. If no selection is +made, the bootloader will boot the default one once the delay elapses.

In the third and last part, called Security, it is +possible to set a password for the bootloader. This means a username and +password will be asked at the boot time to select a booting entry or change +settings. The username is "root" and the password is the one chosen here.

The Advanced button gives some extra options.

Enable ACPI:

ACPI (Advanced Configuration and Power Interface) is a standard for the +power management. It can save energy by stopping unused devices, this was +the method used before APM. Check this box if your hardware is ACPI +compatible.

Enable SMP:

SMP stands for Symmetric Multi Processors, it's an architecture for +multicore processors.

Bemærk

If you have a processor with HyperThreading, Mageia will see it as a dual +processor and enable SMP.

Enable APIC and Enable Local +APIC:

APIC stands for Advanced Programmable Interrupt Controller. There are two +components in the Intel APIC system, the local APIC (LAPIC) and the I/O +APIC. The latter one routes the interrupts it receives from peripheral buses +to one or more local APICs that are in the processor. It is really useful +for multi-processor systems. Some computers have problems with the APIC +system which can cause freezes or incorrect device detection (error message +"spurious 8259A interrupt: IRQ7"). In this case, disable APIC and/or Local +APIC.

The Next screen differs depending on which boot +loader you chose.

  • You have Grub Legacy or Lilo:

    In this case, you can see the list of all the available entries at boot +time. The default one is asterisked. To change the order of the menu +entries, click on the up or down arrows to move the selected item. If you +click on the Add or Modify +buttons, a new window appears to add a new entry in the bootloader menu or +to modify an existing one. You need to be familiar with Lilo or Grub to be +able to use these tools.

    The Label field is freeform, write here what you want +to be displayed in the menu. It matches the Grub command "title". For +example: Mageia3.

    The Image field contains the kernel name. It matches +the Grub command "kernel". For example /boot/vmlinuz.

    The Root field contains the device name where the +kernel is stored. It matches the Grub command "root". For example (hd0,1).

    The Append field contains the options to be given to +the kernel at boot time.

    If the box Default is checked, Grub will boot this +entry by default.

    In the extra screen called Advanced, it is possible to +choose the Video mode, an initrd +file and a network profile, see “Administrér forskellige netværksprofiler”, in the drop-down lists.

  • You have Grub2 or Grub2-efi (boot loaders used by default respectively in +Legacy mode and UEFI mode):

    In this case, the drop-down list labelled Default +displays all the available entries; click on the one wanted as the default +one.

    The Append field contains the options to be given to +the kernel at boot time.

    If you have other operating systems installed, Mageia attempts to add them +to your Mageia boot menu. If you don't want this behaviour, uncheck the box +Probe Foreign OS

    In the extra screen called Advanced, it is possible to +choose the Video mode. If you don't want a bootable +Mageia, but to chain load it from another OS, check the box Do not +touch ESP or MBR and accept the warning.

    Advarsel

    Not installing on ESP or MBR means that the installation is not bootable +unless chain loaded from another OS.

    To set many other parameters, you can use the tool named Grub +Customizer, available in the Mageia repositories (see below).

Opsætning af Indlogningshåndtering

drakedm

Here[49] you can choose which display +manager to use to log into your desktop environment. Only the ones available +on your system will be shown.

Most users will only notice that the provided login screens look +different. However, there are differences in supported features, too. LXDM +is a lightweight display manager, SDDM and GDM have more extras.


[47] You can start this tool from the command line, by typing drakautologin as root.

[48] You can start this tool from the command line, by typing drakboot as root.

[49] You can start this tool from the command line, by typing drakedm as root.

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
forrige   næste
 hjem 
loading table of contents...
diff --git a/mcc/8/da/content/mcc-hardware.html b/mcc/8/da/content/mcc-hardware.html new file mode 100644 index 00000000..f5b4ee06 --- /dev/null +++ b/mcc/8/da/content/mcc-hardware.html @@ -0,0 +1,295 @@ + + + + + Hardware

Hardware

In this screen you can choose between several tools to configure your +hardware. Click on a link below to learn more.

  1. Administrér dit udstyr

    1. “Hardware configuration” = Browse and configure +hardware

    2. “Konfiguration af lyd”

  2. Konfigurér grafik

    1. “3D Desktop Effects” = Configure 3D Desktop effects

    2. “Opsætning af grafisk server”

  3. Konfigurér mus og tastatur

    1. “Set up the Keyboard Layout”

    2. “Opsætning af peger-enheden (mus, museplade)”

  4. Konfigurér printning og skanning

    1. “Install and configure a printer” = Set up the printer(s), +the print job queues, ...

    2. “Opsætning af skannere”

  5. Andre

    1. “Opsætning af UPS for overvågning af strømforsyning”

Hardware configuration

harddrake2

This tool[11] gives a general view of the +hardware of your computer. When the tool is launched, it executes a job to +look for every element of the hardware. For that, it uses the command +ldetect which refers to a list of hardware in +ldetect-lst package.

The window

The window is divided in two columns.

The left column contains a list of the detected hardware. The devices are +grouped by categories. Click on the > to expand the content of a +category. Each device can be selected in this column.

The right column displays information about the selected device. The +Help -> Fields description gives some information +about the content of the fields.

According to which type of device is selected, either one or two buttons are +available at the bottom of the right column:

  • Set current driver options: this can be used to +parameterize the module which is used in relation to the device. This must +used by experts only.

  • Run config tool: access to the tool which can +configure the device. The tool can often be accessed directly from the MCC.

The menu

Valg

The options menu gives the opportunity to check boxes to +enable automatic detection:

  • modem

  • Jaz devices

  • Zip parallel devices

By default these detections are not enabled, because they are slow. Check +the appropriate box(es) if you have this hardware connected. Detection will +be operational the next time this tool is started.

Konfiguration af lyd

draksound

This tool[12] is present in the Mageia +Control Center under the tab Hardware.

Draksound deals with the sound configuration, PulseAudio options and +troubleshooting. It will help you if you experience sound problems or if you +change the sound card.

PulseAudio is a sound server. It receives all the sound +inputs, mixes them according to the user preferences and sends the resulting +sound to the output. See Menu ->Sound and video -> PulseAudio +volume control to set these preferences.

PulseAudio is the default sound server and it is recommended to leave it +enabled.

Glitch-Free improves PulseAudio with some programs. It +is also recommended to leave it enabled.

The Troubleshooting button gives assistance with +fixing any problems you may have. You will find it helpful to try this +before asking the community for help.

The Advanced button displays a new window with an +obvious button.

3D Desktop Effects

drak3d

Introduktion

This tool[13] lets you manage the 3D +desktop effects on your operating system. 3D effects are turned off by +default.

Getting Started

To use this tool, you need to have the glxinfo package installed. If the +package is not installed, you will be prompted to do so before drak3d can +start.

After starting drak3d, you will be presented with a menu window. Here you +can choose either No 3D Desktop Effects or +Compiz Fusion. Compiz Fusion is part of a +composite/window manager, which includes hardware-accelerated special +effects for your desktop. Choose Compiz Fusion to turn +it on.

If this is your first time using this program after a clean installation of +Mageia, you will get a warning message telling you which packages need to be +installed in order to use Compiz Fusion. Click on the +Ok button to continue.

Once the appropriate packages are installed, you will notice that Compiz +Fusion is selected in the drak3d menu, but you must log out and log back in +for the changes to take effect.

After logging back in, Compiz Fusion will be activated. To configure Compiz +Fusion, see the page for the ccsm (CompizConfig Settings Manager) tool.

Problemløsning

Can't See Desktop after Logging in

If after turning on Compiz Fusion you attempt to log back into your desktop +but can't see anything, restart your computer to get back to the log in +screen. Once there, click on the Desktop icon and select drak3d.

When you log in, if your account is listed as an administrator, you will be +prompted for your password again. Otherwise, use the administrator login +with his/her account. Then you can undo any changes that may have caused the +log in problem.

Opsætning af grafisk server

XFdrake

This tool is present in the Mageia Control Center under the tab Hardware. Select Set up the +graphical server. [14]

The buttons allow you to change the graphical configuration.

Graphic card:

The graphic card currently detected is displayed and the matching server +configured. Click on this button to change to another server, for example +one with a proprietary driver.

The available servers are sorted under Vendor by +manufacturer in alphabetical order and then by model also in alphabetical +order. The free drivers are sorted by alphabetical order under +Xorg.

Bemærk

In case of problems, Xorg - Vesa will work with most +graphic cards and give you time to find and install the right driver while +in your Desktop Environment.

If even Vesa doesn't work, choose Xorg - +fbdev, which is used while installing +Mageia, but doesn't allow you to change resolution or refresh rates.

If you made your choice for a free driver, you may be asked if you want to +use a proprietary driver instead with more features (3D effects for +example).

Monitor:

In the same way as above, the monitor currently detected is displayed and +you can click on the button to change to another one. If the desired monitor +isn't in the Vendor list, choose in the +Generic list a monitor with the same features.

Resolution:

This button allows the choice of the resolution (number of pixels) and the +colour depth (number of colours). It displays this screen:

When you change the color depth, a +multi-colored bar will appear next to the second button and show a preview +of what the selected color depth looks like.

The first button shows the currently resolution, click to change for another +one. The list gives all the possible choices according to the graphic card +and the monitor, it is possible to click on Other to +set other resolutions, but bear in mind that you can damage your monitor or +select an uncomfortable setting.

The second button shows the currently colour depth, click to change this for +another one.

Bemærk

Depending on the chosen resolution, it may be necessary to logout and +restart the graphical environment for the settings to take effect.

Test:

Once the configuration done, it is recommended to do a test before clicking +on OK because it is easier to modify the settings now than later if the +graphical environment doesn't work.

Bemærk

In case of a non working graphical environment, type Alt+Ctrl+F2 to open a +text environment, connect as root and type XFdrake (with the caps) to to use +XFdrake's text version.

If the test fails, just wait until the end, if it works but you don't want +to change after all, click on No, if everything is +right, click on OK.

Valgmuligheder:

  1. Global options: If Disable +Ctrl-Alt-Backspace is checked, it will no longer be possible to +restart X server using Ctrl+Alt+Backspace keys.

  2. Graphic card options: Allows you to enable or disable +three specific features depending on the graphic card.

  3. Graphical interface at startup: Most of the time, +Automatically start the graphical interface (Xorg) upon +booting is checked to make the boot switch to graphical mode, it +may be unchecked for a server.

After a click on the Quit button, the system will ask +you to confirm. There is still time to cancel everything and keep the +previous configuration, or to accept. In this case, you have to disconnect +and reconnect to activate the new configuration.

Set up the Keyboard Layout

keyboarddrake

Introduktion

The keyboarddrake tool[15] helps you +configure the basic layout for the keyboard that you wish to use on +Mageia. It affects the keyboard layout for all users on the system. It can +be found in the Hardware section of the Mageia Control Center (MCC) labelled +"Configure mouse and keyboard".

Keyboard Layout

Here you can select which keyboard layout you wish to use. The names (listed +in alphabetical order) describe the language, country, and/or ethnicity each +layout should be used for.

Keyboard Type

This menu lets you select the type of keyboard you are using. If you are +unsure of which to choose, it is best to leave it as the default type.

Opsætning af peger-enheden (mus, museplade)

mousedrake

This tool[16] is present in the Mageia +Control Center under the tab Hardware.

As you must have a mouse to install Mageia, that one is already installed by +Drakinstall. This tool allows installation of another mouse.

The mice are sorted by connection type and then by model. Select your mouse +and click on OK. Most of the time "Universal / Any +PS/2 & USB mice" is suitable for a recent mouse. The new mouse is +immediately taken into account.

Install and configure a printer

system-config-printer

Introduktion

Printing is managed on Mageia by a server named CUPS. It has its own configuration +interface which is accessible via an Internet browser, but Mageia +offers its own tool for installing printers called system-config-printer +which is shared with other distributions such as Fedora, Mandriva, Ubuntu +and openSUSE.

You should enable the non-free repository before proceeding with the +installation, because some drivers may only be available in this way.

Printer installation is carried out in the Hardware +section of the Mageia Control Centre. Select the Configure +printing and scanning tool[17].

MCC will ask for the installation two packages:

task-printing-server

task-printing-hp

It is necessary to accept this installation to continue. Up to 230MB of +dependencies are needed.

To add a printer, choose the "Add" printer button. The system will try to +detect any printers and the ports available. The screenshot displays a +printer connected to a parallel port. If a printer is detected, such as a +printer on a USB port, it will be displayed on the first line. The window +will also attempt to configure a network printer.

Automatically detected printer

This usually refers to USB printers. The utility automatically finds the +name of the printer and displays it. Select the printer and then click +"Next". If there is a known driver associated for the printer, it will be +automatically installed. If there is more than one driver or no known +drivers, a window will ask you to select or furnish one, as explained in the +next paragraph. Continue with “Complete the installation process”

No automatically detected printer

When you select a port, the system loads a driver list and displays a window +to select a driver. The choice can be made through one of the following +options.

  • Select printer from database

  • provide PPD file

  • search for a driver to download

By selecting from the database, the window suggests a printer manufacturer +first, and then a device and a driver associated with it. If more than one +driver is suggested, select one which is recommended, unless you have +encountered some problems with that one before, in this case select the one +which know to work.

Complete the installation process

After the driver selection, a window requests some information which will +allow the system to designate and discover the printer. The first line is +the name under which the device will appear in applications in the list of +available printers. The installer then suggests printing a test page. After +this step, the printer is added and appears in the list of available +printers.

Network printer

Network printers are printers that are attached directly to a wired or +wireless network, that are attached to a printserver or that are attached to +another workstation that serves as printserver.

Bemærk

Often, it is better to configure the DHCP server to always associate a fixed +IP address with the printer's MAC-address. Of course that should be the same +as the IP address the printer of printserver is set to, if it has a fixed +one.

The printer's Mac-address is a serial number given to the printer or +printserver or computer it is attached to, that can be obtained from a +configuration page printed by the printer or which may be written on a label +on the printer or printserver. If your shared printer is attached to a +Mageia system, you can run ifconfig on it +as root to find the MAC-address. It is the sequence of numbers and letters +after "HWaddr".

You can add your network printer by choosing the protocol it uses to talk to +your computer over the network. If you don't know which protocol to choose, +you can try the Network Printer - Find +Network Printer option in the Devices menu +and give the IP address of the printer in the box on the right, where it +says "host".

If the tool recognises your printer or printserver, it will propose a +protocol and a queue, but you can choose a more appropriate one from the +list below it or give the correct queue name if it isn't in the list.

Look in the documentation that came with your printer or printserver to find +which protocol(s) it supports and for possible specific queue names.

Network printing protocols

One current technique is one developed by Hewlett-Packard and known as +JetDirect. It allows access to a printer directly connected to the network +via an Ethernet port. You must know the IP-address at which the printer is +known on the network. This technique is also used inside some ADSL-routers +which contain an USB port to connect the printer. In this case, the +IP-address is that of the router. Note that the tool "Hp Device manager" can +manage dynamically configured IP-adress, setting an URI like +hp:/net/<name-of-the-printer> . In this case, fixed +IP-adress is not required.

Choose the option AppSocket/HP JetDirect as the +protocol and set the address in Host:, do not change +the Port Number, unless you know that it needs to be +changed. After the selection of the protocol, the selection of the driver is +the same as above.

The other protocols are:

  • Internet Printing Protocol (ipp): a printer which can +be accessed on a TCP/IP network via the IPP protocol, for example a printer +connected to a station using CUPS. This protocol may also be used also by +some ADSL-routers.

  • Internet Printing Protocol (https): the same as ipp, +but using http transport and with TLS secured protocol. The port has to be +defined. By default, the port 631 is used.

  • Internet Printing Protocol (ipps): the same as ipp, but +with TLS secured protocol.

  • LPD/LPR host or Printer: a printer which can be +accessed on a TCP/IP network via the LPD protocol, for example a printer +connected to a station using LPD.

  • Windows printer via SAMBA: a printer connected to a +station running Windows or a SMB server and shared.

The URI can also be added directly. Here are some examples on how to form +the URI:

  • Appsocket

    socket://ip-address-or-hostname:port

  • Internet Printing Protocol (IPP)

    ipp://ip-address-or-hostname:port-number/resource

    http://ip-address-or-hostname:port-number/resource

  • Line Printer Daemon (LPD) Protocol

    lpd://username@ip-address-or-hostname/queue

Additional information can be found in the CUPS +documentation.

Device Properties

You can access the properties of the device. The menu allows access to +parameters for the CUPS server. By default a CUPS server is launched on your +system, but you can specify a different one with the +Server | Connect... menu, +another window which gives access to the tuning of other specific parameters +of the server, following Server | +Settings.

Troubleshoot

You can find some information on occurring errors during printing by +inspecting /var/log/cups/error_log

You can also access to a tool to diagnose problems using the +Help | Troubleshoot menu.

Specifics

It is possible that some drivers for specific printers are not available in +Mageia or are not functional. In this case, have a look at the openprinting site to +check if a driver for your device is available. If yes, check if the package +is already present in Mageia and in this case install it manually. Then, +redo the installation process to configure the printer. In all cases, report +the problem in bugzilla or on the forum if you are comfortable with this +tool and furnish the model and driver information and whether the printer +works or not after installation. Here are some sources to find other +up-to-date drivers or for more recent devices.

Brother printers

This +page give a list of drivers provided by Brother. Search the driver +for your device, download the rpm(s) and install.

You should install Brother drivers before running the configuration utility.

Hewlett-Packard printers and All in one +devices

These devices use the hplip tool. It is installed automatically after the +detection or the selection of the printer. You can find other information +here. The +tool "HP Device Manager" is available in the System +menu. Also view configuration +for the management of the printer.

A HP All in one device must be installed as a printer and the scanner +features will be added. Note that sometimes, the Xsane interface doesn't +allow to scan films or slides (the lighting slid can't operate). In this +case, it is possible to scan, using the standalone mode, and save the +picture on a memory card or USB stick inserted in the device. Afterwards, +open your favourite imaging software and load your picture from the memory +card which is appeared in the /media folder.

Samsung colour printer

For specific Samsung and Xerox colour printers, this site provides drivers for +the QPDL protocol.

Epson printers and scanners

Drivers for Epson printers are available from this +search page. For the scanner part, you must install the "iscan-data" +package first, then "iscan" (in this order). A iscan-plugin package can also +be available and is to install. Choose the rpm packages +according to your architecture.

It is possible that the iscan package will generate a warning about a +conflict with sane. Users have reported that this warning can be ignored.

Canon printers

For Canon printers, it may be advisable to install a tool named turboprint +available here .

Opsætning af skannere

scannerdrake

Installation

This tool [18] allows you to configure a +single scanner device or a multifunction device which includes scanning. It +also allows you to share local devices connected to this computer with a +remote computer or to access remote scanners.

When you start this tool for the first time, you may get the following +message:

"SANE packages need to be installed to use scanners

Do you want to install the SANE packages?"

Choose Yes to continue. It will install +scanner-gui and task-scanning if they are not yet +installed.

If your scanner is identified correctly, so if in the above screen you see +the name of your scanner, the scanner is ready for use with, for instance, +XSane or Simple Scan.

In that case, you might now want to want to configure the Scanner +sharing option. You can read about it in the “Scannersharing”.

However, if your scanner hasn't been correctly identified, and checking its +cable(s) and power switch and then pressing Search for new +scanners doesn't help, you'll need to press Add a +scanner manually.

Choose the brand of your scanner in the list you see, then its type from the +list for that brand and click Ok

Bemærk

If you can't find your scanner in the list, then click +Cancel

Please check whether your scanner is supported on the SANE: +Supported Devices page and ask for help in the forums.

Figur 1. Choose port


You can leave this setting to Auto-detect available +ports unless your scanner's interface is a parallel port. In that +case, select /dev/parport0 if you have only one.

After clicking Ok, in most cases you will see a screen +similar to the one below.

If you don't get that screen, then please read the “Extra installation steps”.

Scannersharing

Here you can choose whether the scanners connected to this machine should be +accessible by remote machines and by which remote machines. You can also +decide here whether scanners on remote machines should be made available on +this machine.

Scanner sharing to hosts : name or IP address of hosts can be added or +deleted from the list of hosts allowed to access the local device(s), on +this computer.

Usage of remote scanners : name or IP address of hosts can added or deleted +from the list of hosts which give access to a remote scanner.

Scanner sharing to hosts: you can add host.

Scanner sharing to hosts: specify which host(s) to add, or allow all remote +machines.

"All remote machines" are allowed to access the local scanner.

If the package saned is not yet installed, the tool +offers to do it.

At the end, the tool will alter these files:

/etc/sane.d/saned.conf

/etc/sane.d/net.conf

/etc/sane.d/dll.conf to add or comment the directive +"net"

It will also configure saned and +xinetd to be started on boot.

Specifics

  • Hewlett-Packard

    Most HP scanners are managed from HP Device Manager +(hplip) which also manages printers. In this case, this tool does not allow +you to configure it and invites you to use HP Device +Manager.

  • Epson

    Drivers are available from this +page. When indicated, you must install the +iscan-data package first, then +iscan (in this order). It is possible that the +iscan package will generate a warning about a conflict +with sane. Users have reported that this warning can be +ignored.

Extra installation steps

It is possible that after selecting a port for your scanner in the Figur 1, “Choose port” screen, you need to take one or more extra +steps to correctly configure your scanner.

  • In some cases, you're told the scanner needs its firmware to be uploaded +each time it is started. This tool allows you to load it into the device, +after you installed it on your system. In this screen you can install the +firmware from a CD or a Windows installation, or install the one you +downloaded from an Internet site of the vendor.

    + When your device's firmware needs to be loaded, it can take a long time at +each first usage, possibly more than one minute. So be patient.

  • Also, you may get a screen telling you to adjust the +/etc/sane.d/"name_of_your_SANE_backend".conf file.

  • Read those or other instructions you get carefully and if you don't know +what to do, feel free to ask for help in the forums.

Opsætning af UPS for overvågning af strømforsyning

drakups

This page hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

You can start this tool from the command line, by typing drakups as root.


[11] You can start this tool from the command line, by typing harddrake2 as root.

[12] You can start this tool from the command line, by typing draksound as root.

[13] You can start this tool from the command line, by typing drak3d as root.

[14] You can start this tool from the command line, by typing +XFdrake as normal user or drakx11 +as root. Mind the capital letters.

[15] You can start this tool from the command line, by typing keyboarddrake as root.

[16] You can start this tool from the command line, by typing mousedrake as root.

[17] You can start this tool from the command line, by typing +system-config-printer. The root password will be asked +for.

[18] You can start this tool from the command line, by typing +scannerdrake as root.

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
forrige   næste
 hjem 
loading table of contents...
diff --git a/mcc/8/da/content/mcc-intro.html b/mcc/8/da/content/mcc-intro.html new file mode 100644 index 00000000..f44e4fca --- /dev/null +++ b/mcc/8/da/content/mcc-intro.html @@ -0,0 +1,42 @@ + + + + + About the Manual for the Mageia Control Center

About the Manual for the Mageia Control Center

The Mageia Control Center (MCC) has eight different options or tabs to +choose from in the left column, and even ten if the drakwizard package was +installed. Each of these tabs gives a different set of tools that can be +selected in the big right panel.

The ten following chapters are about those ten options and the related +tools.

The last chapter is about some other Mageia tools, that cannot be chosen in +any of the MCC tabs.

The titles of the pages will often be the same as the titles of the tool +screens.

There is also a search bar available, which you can access by clicking on +the "Search" tab in the left column.

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
forrige   næste
 hjem 
loading table of contents...
diff --git a/mcc/8/da/content/mcc-localdisks.html b/mcc/8/da/content/mcc-localdisks.html new file mode 100644 index 00000000..797ca995 --- /dev/null +++ b/mcc/8/da/content/mcc-localdisks.html @@ -0,0 +1,89 @@ + + + + + Lokal diske

Lokal diske

In this screen you can choose between several tools to manage or share your +local disks. Click on a link below to learn more.

Lokal diske

  1. “Administrér diskpartitioner”

  2. “CD/DVD burner”

  3. “Del dine partitioner på disken”

Administrér diskpartitioner

drakdisk or diskdrake

Advarsel

This tool[40] is very powerful, a tiny +error or a cat jumping on your keyboard can lead to losing all data on a +partition or even to erasing the entire hard disk. For that reason, you'll +see the screen above on top of the tool screen. Click on +Exit if you're not sure you want to continue.

If you have more than one hard disk, you can switch to the hard disk you +want to work on by selecting the correct tab (sda, sdb, sdc etc).

You can choose from many actions to adjust your hard disk to your +preferences. Wiping an entire hard disk, splitting or merging partitions, +resizing them or changing the filesystem, formatting or viewing what is in a +partition: it is all possible. The Clear +all button at the bottom is to erase the complete +disk, the other buttons become visible on the right after you click on a +partition.

Bemærk

If you have an UEFI system, you can see a small partition called "EFI System +Partition" and mounted on /boot/EFI. Never delete it, because it contains +all your different operating systems bootloaders.

If the selected partition is mounted, like in the example below, you cannot +choose to resize, format or delete it. To be able to do that the partition +must be unmounted first.

It is only possible to resize a partition on its right side

To change a partition type (change ext3 to ext4 for example) you have to +delete the partition and then re-create it with the new type. The button +Create appears when a disk empty part is +selected

You can choose a mount point that doesn't exist, it will be created.

Selecting Toggle to expert mode +gives some extra available actions, like labeling the partition, as can be +seen in the screenshot below.

CD/DVD burner

diskdrake --removable

This tool [41]is found under the tab Local +disks in the Mageia Control Center labelled accordingly with your removable +hardware (CD/DVD players and burners and floppy drives only).

Its goal is to define the way your removable disk is mounted.

At the top of the window there is a short description of your hardware and +the chosen options to mount it. Use the menu on the bottom to change +them. Check the item to be changed and then on the OK +button.

Monteringssti

Check this box to change the mount point. The default one is /media/cdrom.

Valg

Many mount options can be chosen here either directly in the list or via the +Advanced submenu. The main are:

user/nouser

user allows an ordinary user (not root) to mount the removable disk, this +option involves noexec, nosuid and nodev. The user who mounted the disk is +the only one who can umount it.

Del dine partitioner på disken

diskdrake --fileshare

This simple tool[42] allows you, the +administrator, to allow users to share parts of their own /home +subdirectories with other users of a same local network which may have +computers running either Linux or Windows operating system.

It is found in the Mageia Control Center, under the Local Disk tab, labelled +"Share your hard disk partitions".

First, answer the question : "Would you like to allow users to +share some of their directories ?", click on No +sharing if the answer is no for all users, click on +Allow all users for all users and click on +Custom if the answer is no for some users and yes for +the others. In this last case, the users that are authorised to share their +directories must belong to the fileshare group, which is automatically +created by the system. You will be asked about this later.

Click on OK, a second screen appears which asks you +choose between NFS or SMB. +Check NFS if Linux is the only operating system on +the network, check SMB if the network includes both +Linux and Windows machines and then click on OK. Any +required packages will be installed if necessary.

The configuration is now complete unless the Custom option was chosen. In +this case, an extra screen prompts you to open Userdrake. This tool allows +you to add users authorised to share their directories to the fileshare +group. In the User tab, click on the user to add to the fileshare group, +then on Edit, In the Groups tab. Check the +fileshare group and click on OK. For more information +about Userdrake, see “Brugere og grupper”

Bemærk

When adding a new user to the fileshare group, you have to disconnect and +reconnect the network for the modifications to be taken into account.

From now on each user belonging to the fileshare group can select in his/her +file manager the directories to be shared, although not all file managers +have this facility.


[40] You can start this tool from the command line, by typing drakdisk or diskdrake as root.

[41] You can start this tool from the command line, by typing diskdrake --removable as root.

[42] You can start this tool from the command line, by typing diskdrake --fileshare as root.

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
forrige   næste
 hjem 
loading table of contents...
diff --git a/mcc/8/da/content/mcc-network.html b/mcc/8/da/content/mcc-network.html new file mode 100644 index 00000000..c83839c7 --- /dev/null +++ b/mcc/8/da/content/mcc-network.html @@ -0,0 +1,247 @@ + + + + + Network and Internet

Network and Internet

In this screen you can choose between several network tools. Click on a link +below to learn more.

  1. Administrér dine netværksenheder

    1. “Netværkscenter”

    2. “Opsætning af et nyt netværksgrænseflade (LAN, ISDN, ADSL, ...)”

    3. “Fjern en forbindelse”

  2. Tilpasning og sikring af dit netværk

    1. “Proxy”

    2. “Del internetforbindelsen med andre lokale maskiner”

    3. “Administrér forskellige netværksprofiler”

    4. “Configure VPN Connection to secure network access”

  3. Andre

    1. “Definition af værter”

Netværkscenter

draknetcenter

This tool[19] is found under the Network +& Internet tab in the Mageia Control Center labelled "Network Center"

Introduktion

When this tool is launched, a window opens listing all the networks +configured on the computer, whatever their type (wired, wireless, satellite, +etc.). When clicking on one of them, three or four buttons appear, depending +on the network type, to allow you to look after the network, change its +settings or connect/disconnect. This tool isn't intended to create a +network, for this see Set up a new network interface (LAN, ISDN, +ADSL, ...) in the same MCC tab.

In the screenshot below, given as example, we can see two networks, the +first one is wired and connected, recognizable by this icon (this one is not connected ) and the second section shows wireless +networks, not connected recognizable by this icon and this one if connected. For the other network types, +the colour code is always the same, green if connected and red if not +connected.

In the wireless part of the screen, you can also see all the detected +networks, with the SSID, the Signal +strengh, if they are encrypted (in red) or not (in green), and +the Operating mode. Click on the chosen one and then +either on Monitor, Configure +or Connect. It is possible here to go from a network +to another one. If a private network is selected, the Network Settings +window (see below) will open and ask you for extra settings ( an encryption +key in particular).

Click on Refresh to update the screen.

The Monitor button

This button allows you to watch the network activity, downloads (toward the +PC, in red) and uploads (toward the Internet, in green). The same screen is +available by right clicking on the Internet icon in the system tray +-> Monitor Network.

There is a tab for each network (here eth0 is the wired network, lo the +local loopback and wlan0 the wireless network) and a tab connection which +gives details about connection status.

Bemærk

At the bottom of the window is a title Traffic +accounting, we will look at that in the next section.

The Configure button

A - For a wired network

It is possible to change all the settings given during network +creation. Most of the time, checking Automatic IP +(BOOTP/DHCP) will do, but in case of problems, manual +configuration may give better results.

For a residential network, the IP address always looks +like 192.168.0.x, Netmask is 255.255.255.0, and the +Gateway and DNS servers are +available from your providers website.

Enable traffic accounting if checked this will count +the traffic on a hourly, daily or monthly basis. The results are visible in +the Network monitor detailed in the previous section. Once enabled, you may +have to reconnect to the network.

Allow interface to be controlled by Network +Manager:

This section hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

The button Advanced:

This section hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

B - For a wireless network

Only the items not already seen above are explained.

Operating mode:

Select Managed if the connection is via an access +point, there is an ESSID detected. Select +Ad-hoc if it is a peer to peer network. Select +Master if your network card is used as the +access point, your network card needs to support this mode.

Encryption mode and Encryption key:

If it is a private network, you need to know these settings.

WEP uses a password and is weaker than WPA which uses a +passphrase. WPA Pre-Shared Key is also called WPA +personal or WPA home. WPA Enterprise is not often used +in private networks.

Allow access point roaming:

Roaming is a technology which enables allows computer to change its access +point while remaining connected to the network.

The button Advanced:

This page hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

The Advanced Settings button

This section hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

Opsætning af et nyt netværksgrænseflade (LAN, ISDN, ADSL, ...)

drakconnect

Introduktion

This tool[20] allows to configure much of +local network or Internet access. You have to know some information from +your access provider or your network administrator.

Select the type of connection you want to set, according to which hardware +and provider you have.

A new Wired connection (Ethernet)

  1. The first window lists the interfaces which are available. Select the one +to configure.

  2. At this point, the choice is given between an automatic or a manual IP +address.

  3. Automatic IP

    1. Ethernet/IP settings: you have to select if DNS servers +are declared by the DHCP server or are manually specified, as explained +below. In the last case, the IP address of DNS servers has to be set. The +HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, +the name localhost.localdomain is attributed by default. +The Hostname can also be provided by the DHCP server with the option +Assign host name from DHCP server. Not all DHCP servers +have such a function and if you're setting up your PC to get an IP address +from a domestic ADSL router, it is unlikely.

    2. The advanced button give the opportunity to specify:

      • Search domain (not accessible, as provided by the DHCP server)

      • the DHCP client

      • DHCP timeout

      • Get YP server from DHCP (checked by default): specify the NIS server

      • Get NTPD server from DHCP (synchronisation of clocks)

      • the HOSTNAME required by DHCP. Only use this option if the DHCP server +requires the client to specify a hostname before receiving an IP +address. This option is not dealt by some DHCP servers.

    3. After accepting, the last steps which are common to all connection +configurations are explained: “Ending the configuration”

  4. Manuel konfiguration

    1. Ethernet/IP settings: you need to declare what DNS +servers to use. The HOSTNAME of the computer can be specified here. If no +HOSTNAME is specified, the name localhost.localdomain is +attributed by default.

      For a residential network, the IP address usually looks like +192.168.x.x, Netmask is +255.255.255.0, and the Gateway and DNS servers are +available from your service provider's website.

      In advanced settings, you can specified a Search +domain. It would usually be your home domain, i.e. if your +computer is called "splash", and it's full domain name is +"splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless +you specifically need it, it's ok not to define this setting. Again, +domestic ADSL would not need this setting.

    2. The next steps are exposed at “Ending the configuration”

A new Satellite connection (DVB)

This section hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

A new Cable modem connection

  1. The first window lists the interfaces which are available. Select the one +to configure.

  2. At this point, the choice is given between an automatic or a manual IP +address.

  3. You have to specify a authentication method:

    • Ingen

    • BPALogin (necessary for Telstra). In this case you have to provide User name +and password.

  4. Automatic IP

    1. Cable/IP settings: you have to select if DNS servers +are declared by the DHCP server or are manually specified, as explained +below. In the last case, the IP address of DNS servers has to be set. The +HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, +the name localhost.localdomain is attributed by default. +The Hostname can also be provided by the DHCP server with the option +Assign host name from DHCP server. Not all DHCP servers +have such a function and if you're setting up your PC to get an IP address +from a domestic ADSL router, it is unlikely.

    2. The advanced button give the opportunity to specify:

      • Search domain (not accessible, as provided by the DHCP server)

      • the DHCP client

      • DHCP timeout

      • Get YP server from DHCP (checked by default): specify the NIS server

      • Get NTPD server from DHCP (synchronisation of clocks)

      • the HOSTNAME required by DHCP. Only use this option if the DHCP server +requires the client to specify a hostname before receiving an IP +address. This option is not dealt by some DHCP servers.

    3. After accepting, the last steps which are common to all connection +configurations are explained: “Ending the configuration”

  5. Manuel konfiguration

    1. Cable/IP settings: you need to declare what DNS servers +to use. The HOSTNAME of the computer can be specified here. If no HOSTNAME +is specified, the name localhost.localdomain is +attributed by default.

      For a residential network, the IP address usually looks like +192.168.x.x, Netmask is +255.255.255.0, and the Gateway and DNS servers are +available from your service provider's website.

      In advanced settings, you can specified a Search +domain. It would usually be your home domain, i.e. if your +computer is called "splash", and it's full domain name is +"splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless +you specifically need it, it's ok not to define this setting. Again, +domestic connection would not need this setting.

    2. The next steps are exposed at “Ending the configuration”

A new DSL connection

  1. If the tool detects network interfaces, it offers to select one and to +configure it.

  2. A list of providers is proposed, classified by countries. Select your +provider. If it is not listed, select the option +Unlisted and then enter the options your provider gave.

  3. Select one of the protocols available:

    • Dynamic Host Configuration Protocol (DHCP)

    • Manuel TCP/IP-konfiguration

    • PPP over ADSL (PPPoA)

    • PPP over Ethernet (PPPoE)

    • Point to Point Tunneling Protocol (PPTP)

  4. Adgangsopsætning

    • Konto-login (brugernavn)

    • Account password

    • (Advanced) Virtual Path ID (VPI)

    • (Advanced) Virtual Circuit ID (VCI)

  5. The next steps are exposed at “Ending the configuration”

A new ISDN connection

  1. The wizard asks which device to configure:

    • Manual choice (internal ISDN card)

    • Eksternt ISDN modem

  2. A list of hardware is proposed, classified by category and +manufacturer. Select your card.

  3. Select one of the protocols available:

    • Protocol for the rest of the world, except Europe (DHCP)

    • Protocol for Europe (EDSS1)

  4. A list of providers is then offered, classified by countries. Select your +provider. If it is not listed, select the option +Unlisted and then enter the options your provider gave +you. Then it is asked for parameters:

    • Navn på forbindelsen

    • Telefonnummer

    • Brugernavn

    • Account password

    • Autentifikationsmetode

  5. After that, you have to select if you get the IP address by automatic or +manual method. In the last case, specify IP address and Subnet mask.

  6. The next step is to choose how DNS servers address are obtained, by +automatic or manual method. In the case of manual configuration, you have to +put:

    • Domænenavn

    • First and second DNS Server

    • Select if the hostname is set from IP. This option is to select only if you +are sure that your provider is configured to accept it.

  7. The next step is to choose how the gateway address is obtained, by automatic +or manual method. In the case of manual configuration, you have to enter the +IP address.

  8. The next steps are exposed at “Ending the configuration”

A new Wireless connection (WiFi)

  1. A first window lists the interfaces which are available and an entry for +Windows driver (ndiswrapper). Select the one to configure. Use ndiswrapper +only if the other configuration methods did not work.

  2. At this step, the choice is given between the different access points that +the card has detected.

  3. Specific parameter for the wireless card are to provide:

    • Operating mode:

      Administreret (managed)

      To access to an existing access point (the most frequent).

      Ad-Hoc

      To configure direct connection between computers.

    • Network Name (ESSID)

    • Encryption mode: it depends of how the access point is configured.

      WPA/WPA2

      This encryption mode is to prefer if your hardware allows it.

      WEP

      Some old hardware deals only this encryption method.

    • Krypteringsnøgle

      It is generally provided with the hardware which give the access point.

  4. At this step, the choice is given between an automatic IP address or a +manual IP address.

  5. Automatic IP

    1. IP settings: you have to select if DNS servers are +declared by the DHCP server or are manually specified, as explained +below. In the last case, IP address of DNS servers has to be set. The +HOSTNAME of the computer can be specified here. If no HOSTNAME is +specified, the name localhost.localdomain is attributed by default. The +Hostname can also be provided by the DHCP server with the option +Assign host name from DHCP server

    2. The advanced button give the opportunity to specify:

      • Search domain (not accessible, as provided by the DHCP server)

      • the DHCP client

      • DHCP timeout

      • Get YP server from DHCP (checked by default): specify the NIS servers

      • Get NTPD server from DHCP (synchronisation of clocks)

      • the HOSTNAME required by DHCP. Only use this option if the DHCP server +requires the client to specify a hostname before receiving an IP +address. This option is not dealt by some DHCP servers.

    3. After accepting the configuration the step, which is common to all +connection configurations, is explained: “Ending the configuration”

  6. Manuel konfiguration

    1. IP settings: you have to declare DNS servers. The +HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, +the name localhost.localdomain is attributed by default.

      For a residential network, the IP address always looks like +192.168.x.x, Netmask is +255.255.255.0, and the Gateway and DNS servers are +available from your providers website.

      In advanced settings, you can specified a Search +domain. It must seem to your hostname without the first name, +before the period.

    2. The next steps are exposed at “Ending the configuration”

A new GPRS/Edge/3G connection

  1. If the tool detects wireless interfaces, it offers to select one and to +configure it.

  2. The PIN is asked. Leave empty if the PIN is not required.

  3. The wizard asks for network. If it is not detected, select the option +Unlisted.

  4. A list of providers is proposed, classified by countries. Select your +provider. If it is not listed, select the option +Unlisted and then enter the options your provider gave.

  5. Provide access settings

    • Navn for adgangspunkt

    • Konto-login (brugernavn)

    • Account password

  6. The next steps are exposed at “Ending the configuration”

A new Bluetooth Dial-Up Networking connection

This section hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

A new Analog telephone modem connection (POTS)

  1. The wizard asks which device to configure:

    • Manuelt valg

    • Detected hardware, if any.

  2. A list of ports is proposed. Select your port.

  3. If not yet installed, it will be suggested that you install the package +kppp-provider.

  4. A list of providers is proposed, classified by countries. Select your +provider. If it is not listed, select the option +Unlisted and then enter the options your provider +gave. Then it is asked for Dialup options:

    • Connection name

    • Phone number

    • Login ID

    • Password

    • Authentication, choose between:

      • PAP/CHAP

      • Skript-baseret

      • PAP

      • Terminal-baseret

      • CHAP

  5. The next steps are exposed at “Ending the configuration”

Ending the configuration

In the next step, you can specify:

  • Allow users to manage the connection

  • Start the connection at boot

  • Enable traffic accounting

  • Allow interface to be controlled by Network Manager

  • In the case of a wireless connection, a supplemental box is Allow +access point roaming which give the possibility to switch +automatically between access point according to the signal strength.

With the advanced button, you can specify:

  • Metric (10 by default)

  • MTU

  • Hotplugging af netværk

  • Aktivér IPv6 til IPv4-tunnel

The last step allows you to specify if the connection is to start +immediately or not.

Fjern en forbindelse

drakconnect --del

Here, you can delete a network interface[21].

Click on the drop down menu, choose the one you want to remove and then +click next.

You'll see a message that the network interface has been deleted +successfully.

Proxy

drakproxy

If you have to use a proxy server to access to the internet, you can use +this tool[22] to configure it. Your net +administrator will give you the information you need. You can also specify +some services which can be accessed without the proxy by exception.

From Wikipedia, on 2012-09-24, article Proxy server: In computer networks, a +proxy server is a server (a computer system or an application) that acts as +an intermediary for requests from clients seeking resources from other +servers. A client connects to the proxy server, requesting some service, +such as a file, connection, web page, or other resource available from a +different server. The proxy server evaluates the request as a way to +simplify and control their complexity.

Del internetforbindelsen med andre lokale maskiner

drakgw

Principles

This is useful when you have a +computer (3) which has Internet (2) access and is connected also to a local +network (1). You can use computer (3) as a gateway to give that access to +other workstations (5) and (6) in the local network (1). For this, the +gateway must have two interfaces; the first one such as an ethernet card +must be connected to the local network, and the second one (4) connected to +the Internet (2).

The first step is to verify that the network and the access to Internet are +set up, as documented in “Netværkscenter”.

Gateway wizard

The wizard[23] offers successive steps +which are shown below:

  • If the wizard does not detect at least two interfaces, it warns about this +and asks to stop the network and configure the hardware.

  • specify the interface used for the Internet connection. The wizard +automatically suggests one of the interfaces, but you should verify that +what is proposed is correct.

  • specify which interface is used for the Lan access. The wizard also proposes +one, check that this is correct.

  • The wizard proposes parameters for the Lan network, such as IP address, mask +and domain name. Check that these parameters are compatible with the actual +configuration. It is recommended that you accept these values.

  • specify if the computer has to be used as a DNS server. If yes, the wizard +will check that bind is installed. Otherwise, you have to +specify the address of a DNS server.

  • specify if the computer is to be used as a DHCP server. If yes, the wizard +will check that dhcp-server is installed and offer to configure +it, with start and end addresses in the DHCP range.

  • specify if the computer is to be used as a proxy server. If yes, the wizard +will check that squid is installed and offer to configure it, +with the address of the administrator (admin@mydomain.com), name of the +proxy (myfirewall@mydomaincom), the port (3128) and the cache size (100 Mb).

  • The last step allows you to check if the gateway machine is connected to +printers and to share them.

You will be warned about the need to check the firewall if it is active.

Configure the client

If you have configured the gateway machine with DHCP, you only need to +specify in the network configuration tool that you get an address +automatically (using DHCP). The parameters will be obtained when connecting +to the network. This method is valid whatever operating system the client is +using.

If you must manually specify the network parameters, you must in particular +specify the gateway by entering the IP-address of the machine acting as the +gateway.

Stop connection sharing

If you want to stop sharing the connection on the Mageia computer, launch +the tool. It will offer to reconfigure the connection or to stop the +sharing.

Administrér forskellige netværksprofiler

draknetprofile

This page hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

You can start this tool from the command line, by typing draknetprofile as root.

Configure VPN Connection to secure network access

drakvpn

Introduktion

This tool[24] allows to configure secure +access to a remote network establishing a tunnel between the local +workstation and the remote network. We discuss here only of the +configuration on the workstation side. We assume that the remote network is +already in operation, and that you have the connection information from the +network administrator, like a .pcf configuration file .

Konfiguration

First, select either Cisco VPN Concentrator or OpenVPN, depending on which +protocol is used for your virtual private network.

Then give your connection a name.

At the next screen, provide the details for your VPN connection.

  • For Cisco VPN

  • For openvpn. The openvpn package and its dependencies will be installed the +first time the tool is used.

    Select the files that you received +from the network administrator.

    Advanced parameters:

    The next screen asks for IP-address of the gateway.

When the parameters are set, you have the option of starting the VPN +connection.

This VPN connection can be set to start automatically with a network +connection. To do this, reconfigure the network connection to always connect +to this VPN.

Definition af værter

drakhosts

If some systems on your network grant you services, and have fixed +IP-addresses, this tool[25] allows to +specify a name to access them more easily. Then you can use that name +instead of the IP-address.

Add

With this button, you add the name for a new system. You will get a window +to specify the IP-address, the host name for the system, and optionally an +alias which can be used in the same way that the name is.

Modify

You can access the parameters of an entry previously defined. You get the +same window.


[19] You can start this tool from the command line, by typing draknetcenter as root.

[20] You can start this tool from the command line, by typing drakconnect as root.

[21] You can also start this tool from the command line, by typing drakconnect --del as root.

[22] You can start this tool from the command line, by typing drakproxy as root.

[23] You can start this tool from the command line, by typing drakgw as root.

[24] You can start this tool from the command line, by typing drakvpn as root.

[25] You can start this tool from the command line, by typing drakhosts as root.

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
forrige   næste
 hjem 
loading table of contents...
diff --git a/mcc/8/da/content/mcc-networkservices.html b/mcc/8/da/content/mcc-networkservices.html new file mode 100644 index 00000000..01b87290 --- /dev/null +++ b/mcc/8/da/content/mcc-networkservices.html @@ -0,0 +1,121 @@ + + + + + Netværkstjenester

Netværkstjenester

This screen and the one for Sharing are only visible if +the drakwizard package is installed. You can choose +between several tools to set up different servers. Click on a link below or +on “Fildeling”to learn more.

Netværkstjenester

  1. “Konfigurér DHCP”

  2. “Konfigurér DNS”

  3. “Konfigurér proxy”

  4. “Konfigurér tid”

  5. “OpenSSH-serverkonfiguration”

Konfigurér DHCP

drakwizard dhcp

Bemærk

This tool is broken in Mageia 4 because of new naming scheme for the Net +interfaces

This tool[7] can help you to set up a +DHCP server. It is a component of drakwizard which should +be installed before you can access to it.

What is DHCP?

The Dynamic Host Configuration Protocol (DHCP) is a +standardized networking protocol used on IP networks that dynamically +configures IP addresses and other information that is needed for Internet +communication. (From Wikipedia)

Setting up a DHCP server with drakwizard dhcp

Welcome to the DHCP server wizard.

  1. Introduktion

    The first page is just an introduction, click Next.

  2. Selecting Adaptor

    Choose the network interface, which is connected to the subnet, and for +which DHCP will assign IP addresses, and then click +Next.

  3. Select IP range

    Select the beginning and ending IP addresses of the range of IPs you want +the server to offer, along with the IP of the gateway machine connecting to +some place outside the local network, hopefully close to the Internet, then +click Next.

  4. Oversigt

    Take a second to check these options, then click +Next.

  5. Hold on...

    This can be fixed. Click Previous a few times and +change things around.

  6. Hours later...

What is done

  • Installing the package dhcp-server if needed;

  • Saving /etc/dhcpd.conf in /etc/dhcpd.conf.orig;

  • Creating a new dhcpd.conf starting from +/usr/share/wizards/dhcp_wizard/scripts/dhcpd.conf.default and +adding the new parameters:

    • hname

    • dns

    • net

    • ip

    • mask

    • rng1

    • rng2

    • dname

    • gateway

    • tftpserverip

    • dhcpd_interface

  • Also modifying Webmin configuration file +/etc/webmin/dhcpd/config

  • Restarting dhcpd.

Konfigurér DNS

drakwizard bind

This page hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

You can start this tool from the command line, by typing drakwizard bind as root.

Konfigurér proxy

drakwizard squid

This tool[8] can help you to set up a +proxy server. It is a component of drakwizard which should be installed +before you can access to it.

What is a proxy server?

A proxy server is a server (a computer system or an application) that acts +as an intermediary for requests from clients seeking resources from other +servers. A client connects to the proxy server, requesting some service, +such as a file, connection, web page, or other resource available from a +different server and the proxy server evaluates the request as a way to +simplify and control its complexity. (From Wikipedia)

Setting up a proxy server with drakwizard squid

Welcome to the proxy server wizard.

  1. Introduktion

    The first page is just an introduction, click Next.

  2. Selecting the proxy port

    Select the proxy port browsers will connect through, then click +Next.

  3. Set Memory and Disk Usage

    Set memory and disk cache limits, then click Next.

  4. Select Network Access Control

    Set visibility to local network or world, then click +Next.

  5. Grant Network Access

    Grant access to local networks, then click Next.

  6. Use Upper Level Proxy Server?

    Cascade through another proxy server? If no, skip next step.

  7. Upper Level Proxy URL and Port

    Provide upper level proxy hostname and port, then click +Next.

  8. Oversigt

    Take a second to check these options, then click +Next.

  9. Start during boot?

    Choose if the proxy server should be started during the boot time, then +click Next.

  10. Afslut

    You're done! Click Finish.

What is done

  • Installing the package squid if needed;

  • Saving /etc/squid/squid.conf in +/etc/squid/squid.conf.orig;

  • Creating a new squid.conf starting from +squid.conf.default and adding the new parameters:

    • cache_dir

    • localnet

    • cache_mem

    • http_port

    • level 1, 2 or 3 and http_access according to level

    • cache_peer

    • visible_hostname

  • Restarting squid.

Konfigurér tid

drakwizard ntp

This tool[9] purpose is to set the time of +your server synchronised with an external server. It isn't installed by +default and you have to also install the drakwizard and drakwizard-base +packages.

Setup a NTP server with drakwizard ntp

  1. After a welcome screen (see above), the second one ask you to choose three +time servers in the drop down lists and suggests to use pool.ntp.org twice +because this server always points to available time servers.

  2. The following screens allows to choose the region and the city and then, you +arrive on a summary. If something is wrong, you can obviously change it +using the Previousbutton. If everything is right, +click on the Next button to proceed to the test. It +may take a while and you finally get this screen below:

  3. Click on the Finish button to close the tool

What is done

This tool executes the following steps:

  • Installing the package ntp if needed

  • Saving the files /etc/sysconfig/clock to +/etc/sysconfig/clock.orig and +/etc/ntp/step-tickers to +/etc/ntp/step-tickers.orig;

  • Writing a new file /etc/ntp/step-tickers with the list of +servers;

  • Modifying the file /etc/ntp.conf by inserting the first server +name;

  • Stopping and starting crond, atd and +ntpd services;

  • Setting the hardware clock to the current system time with UTC reference.

OpenSSH-serverkonfiguration

drakwizard sshd

This tool[10] can help you to set up an +SSH daemon. +

What is SSH?

+ Secure Shell (SSH) is a cryptographic network protocol for secure data +communication, remote command-line login, remote command execution, and +other secure network services between two networked computers that connects, +via a secure channel over an insecure network, a server and a client +(running SSH server and SSH client programs, +respectively). (From Wikipedia) +

Setting up an SSH daemon with drakwizard sshd

+ Welcome to the Open SSH wizard. +

  1. Select Type of Configure Options

    + Choose Expert for all options or +Newbie to skip steps 3-7, click +Next. +

  2. Generelle indstillinger

    + Sets visibility and root access options. Port 22 is the standard +SSH port. +

  3. Authentication Methods

    + Allow a variety of authentication methods users can use while connecting, +then click Next. +

  4. Logging

    + Choose logging facility and level of output, then click +Next. +

  5. Login Options

    + Configure per-login settings, then click Next. +

  6. User Login Options

    + Configure the user access settings, then click Next. +

  7. Compression and Forwarding

    + Configure X11 forwarding and compression during transfer, then click +Next. +

  8. Oversigt

    + Take a second to check these options, then click +Next. +

  9. Afslut

    + You're done! Click Finish. +


[7] You can start this tool from the command line, by typing drakwizard dhcp as root.

[8] You can start this tool from the command line, by typing drakwizard squid as root.

[9] You can start this tool from the command line, by typing drakwizard ntp as root.

[10] You can start this tool from the command line, by typing drakwizard sshd as root.

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
forrige   næste
 hjem 
loading table of contents...
diff --git a/mcc/8/da/content/mcc-networksharing.html b/mcc/8/da/content/mcc-networksharing.html new file mode 100644 index 00000000..bfd98896 --- /dev/null +++ b/mcc/8/da/content/mcc-networksharing.html @@ -0,0 +1,150 @@ + + + + + Netværksdeling

Netværksdeling

In this screen you can choose between several tools for sharing drives and +directories. Click on a link below to learn more.

  1. Konfigurér Windows®- fildelinger

    1. “Adgang til Windows (SMB) delte drev og kataloger”

    2. “Share directories and drives with Samba” = Share drives and +directories with Windows (SMB) systems

  2. Konfigurér NFS-fildelinger

    1. “Adgang til NFS-delte drev og kataloger”

    2. “Del drev og kataloger med NFS”

  3. Konfigurér WebDAV-fildelinger

    1. “Adgang til WebDAV-delte drev og kataloger”

Adgang til Windows (SMB) delte drev og kataloger

diskdrake --smb

Introduktion

This tool[35] allows you to declare which +shared directories to be accessible to all users on the machine. The +protocol used for this is SMB which has been popularized on Windows(R) +systems. The shared directory will be available directly at boot. Shared +directories can be also accessed directly in a single session by a user with +tools such as file browsers.

Before starting the tool, it is a good idea to declare the names of +available servers, for example with “Definition af værter”

Procedure

Select search servers to obtain a list of servers who +share directories.

Click on the server name and on > before the server name to display the +list of the shared directories and select the directory you want to access.

The Mount point button will become available, you +have to specify where to mount the directory.

After choosing the mount point, it can be mounted with the Mount +button. You can also verify and change some options with the +Options button.

In options, you can specify the user name and the password of those able to +connect to the SMB server. After mounting the directory, you can unmount it +with the same button.

After accepting the configuration with the Done button, a message will ask +"Do you want to save the /etc/fstab modifications". Saving, will allow +directory to made available at each boot, if the network is accessible. The +new directory is then available in your file browser, for example in +dolphin.

Share directories and drives with Samba

draksambashare

Introduktion

Samba is a protocol used in different Operating Systems to share some +resources like directories or printers. This tool allows you to configure +the machine as a Samba server using the protocol SMB/CIFS. This protocol is +also used by Windows(R) and workstations with this OS can access the +resources of the Samba server.

Preparation

To be accessed from other workstations, the server has to have a fixed IP +address. This can be specified directly on the server, for example with +“Netværkscenter”, or at the DHCP server which identifies the +station with its MAC-address and give it always the same address. The +firewall has also to allow the incoming requests to the Samba server.

Wizard - Standalone server

At the first run, the tools [36] checks if +needed packages are installed and proposes to install them if they are not +yet present. Then the wizard to configure the Samba server is launched.

In the next window the Standalone server configuration option is already +selected.

Then specify the name of the workgroup. This name should be the same for the +access to the shared resources.

The netbios name is the name which will be used to designate the server on +the network.

Choose the security mode:

  • user: the client must be authorized to access the +resource

  • share: the client authenticates itself separately for +each share

You can specify which hosts are allowed to access the resources, with IP +address or host name.

Specify the server banner. The banner is the way this server will be +described in the Windows workstations.

The place where Samba can log information can be specified at the next step.

The wizard displays a list of the chosen parameters before you accept the +configuration. When accepted, the configuration will be written in +/etc/samba/smb.conf.

Wizard - Primary domain controller

If the "Primary domain controller" +option is selected, the wizard asks for indication if Wins is to support or +not and to provide admin users names. The following steps are then the same +as for standalone server, except you can choose also the security mode:

  • domain: provides a mechanism for storing all user and +group accounts in a central, shared, account repository. The centralized +account repository is shared between (security) controllers.

Declare a directory to share

With the Add button, we get:

A new entry is thus added. It can be modified with the +Modify button. Options can be edited, such as whether +the directory is visible to the public, writable or browseable. The share +name can not be modified.

Menu entries

When the list has at least one entry, menu entries can be used.

File|Write conf. Save the current configuration in /etc/samba/smb.conf.

Samba server|Configure. The wizard can be run again with this command.

Samba server|Restart. The server is stopped and restarted with the current configuration files.

Samba Server|Reload. The configuration displayed is reloaded from the current configuration +files.

Printers share

Samba also allows you to share printers.

Samba users

In this tab, you can add users who are allowed to access the shared +resources when authentication is required. You can add users from “Brugere og grupper”

Adgang til NFS-delte drev og kataloger

diskdrake --nfs

.

Introduktion

This tool[37] allows you to declare some +shared directories to be accessible to all users on the machine. The +protocol used for this is NFS which is available on most Linux or Unix +systems. The shared directory will be thus available directly at +boot. Shared directories can be also accessible directly in a single session +for a user with tools such as file browsers.

Procedure

Select search servers to obtain a list of servers +which share directories.

Click on the > symbol before the server name to display the list of the +shared directories and select the directory you want to access.

The button Mount point will be available and you have +to specify where to mount the directory.

After choosing the mount point, You can mount it. You can also verify and +change some options with the Options button. After +mounting the directory, you can unmount it with the same button.

On accepting the configuration with the Done button, +a message will displayed, asking "Do you want to save the /etc/fstab +modifications". This will make the directory available at each boot, if the +network is accessible. The new directory is then available in your file +browser, for example in Dolphin.

Del drev og kataloger med NFS

draknfs

Prerequisites

When the wizard[38] is launched for the +first time, it may display the following message:

The package nfs-utils needs to be installed. Do you want to install it?

After completing the installation, a window with an empty list is displayed.

Main window

A list of directories which are shared is displayed. At this step, the list +is empty. The Add button gives access to a +configuration tool.

Ændr indgang

The configuration tool is labeled "Modify entry". It may be also launched +with the Modify button. The following parameters are +available.

NFS Directory

Here you can specify which directory is to be shared. The +Directory button gives access to a browser to choose +it.

Vært-adgang

Here you can specify the hosts that are authorized to access the shared +directory.

NFS clients may be specified in a number of ways:

single host: a host either by an abbreviated name +recognized be the resolver, fully qualified domain name, or an IP address

netgroups: NIS netgroups may be given as @group.

wildcards: machine names may contain the wildcard +characters * and ?. For instance: *.cs.foo.edu matches all hosts in the +domain cs.foo.edu.

IP networks: you can also export directories to all +hosts on an IP (sub-)network simultaneously. For example, either +`/255.255.252.0' or `/22' appended to the network base address.

Omformning af Bruger-ID

map root user as anonymous: maps requests from uid/gid +0 to the anonymous uid/gid (root_squash). The root user from the client +cannot read or write to the files on the server which are created by root on +the server itself.

allow real remote root access: turn off root +squashing. This option is mainly useful for diskless clients +(no_root_squash).

map all users to anonymous user: maps all uids and gids +to the anonymous user (all_squash). Useful for NFS-exported public FTP +directories, news spool directories, etc. The opposite option is no user UID +mapping (no_all_squash), which is the default setting.

anonuid and anongid: explicitly set the uid and gid of +the anonymous account.

Avancerede tilvalg

Secured Connection: this option requires that requests +originate on an internet port less than IPPORT_RESERVED (1024). This option +is on by default.

Read-Only share: allow either only read or both read +and write requests on this NFS volume. The default is to disallow any +request which changes the filesystem. This can also be made explicit by +using this option.

Synchronous access: prevents the NFS server from +violating the NFS protocol and to reply to requests before any changes made +by these requests have been committed to stable storage (e.g. disc drive).

Subtree checking: enable subtree checking which can +help improve security in some cases, but can decrease reliability. See +exports(5) man page for more details.

Menu entries

So far the list has at least one entry.

File|Write conf

Save the current configuration.

NFS Server|Restart

The server is stopped and restarted with the current configuration files.

NFS Server|Reload

The configuration displayed is reloaded from the current configuration +files.

Adgang til WebDAV-delte drev og kataloger

diskdrake --dav

This tool[39] is found in the Mageia +Control Center, under the Network Sharing tab, labeled Configure +WebDAV shares.

Introduktion

WebDAV is a +protocol that allows to mount a web server's directory locally, so that it +appears as a local directory. It is necessary that the remote machine run a +WebDAV server. This is not the aim of this tool to configure the WebDAV +server.

Creating a new entry

The first screen of the tool displays the already configured entries, if +any, and a New button. Use it to create a new +entry. Insert the server URL in the field of the new screen.

Then you get a screen with radio buttons to select some actions. Continue +with the action Mount point by clicking +OK after selecting the radio button, as the +Server is already configured. You can however correct +it, if needed.

The content of the remote directory will be accessible through this mount +point.

In the next step, give your user name and password. If you need some other +options, you can give them in the advanced screen.

The option Mount allows you to mount immediately the +access.

After you accepted the configuration with the radio button +Done, the first screen is displayed again and your +new mount point is listed. After you choose Quit, you +are asked whether or not to save the modifications in +/etc/fstab. Choose this option if you want that the +remote directory is available at each boot. If your configuration is for +one-time usage, do not save it.


[35] You can start this tool from the command line, by typing diskdrake --smb as root.

[36] You can start this tool from the command line, by typing draksambashare as root.

[37] You can start this tool from the command line, by typing diskdrake --nfs as root.

[38] You can start this tool from the command line, by typing draknfs as root.

[39] You can start this tool from the command line, by typing diskdrake --dav as root.

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
forrige   næste
 hjem 
loading table of contents...
diff --git a/mcc/8/da/content/mcc-security.html b/mcc/8/da/content/mcc-security.html new file mode 100644 index 00000000..9f897dca --- /dev/null +++ b/mcc/8/da/content/mcc-security.html @@ -0,0 +1,215 @@ + + + + + Sikkerhed

Sikkerhed

In this screen you can choose between several security tools. Click on a +link below to learn more.

Sikkerhed

  1. “MSEC: Systemsikkerhed og overvågning” = Configure system security, permissions +and audit

  2. “Opsætning af personlig brandmur”

  3. “Konfigurér autentifikation for Mageia-værktøjer”

  4. “Avanceret opsætning af netværksgrænseflader og brandmur”

  5. “Styring for forældre”

MSEC: Systemsikkerhed og overvågning

msecgui

Presentation

msecgui[43] is a graphic user interface for +msec that allows to configure your system security according to two +approaches:

  • It sets the system behaviour, msec imposes modifications to the system to +make it more secure.

  • It carries on periodic checks automatically on the system in order to warn +you if something seems dangerous.

msec uses the concept of "security levels" which are intended to configure a +set of system permissions, which can be audited for changes or +enforcement. Several of them are proposed by Mageia, but you can define your +own customised security levels.

Overview tab

See the screenshot above

The first tab takes up the list of the different security tools with a +button on the right side to configure them:

  • Firewall, also found in the MCC / Security / Set up your personal firewall

  • Updates, also found in MCC / Software Management / Update your system

  • msec itself with some information:

    • enabled or not

    • the configured Base security level

    • the date of the last Periodic checks and a button to see a detailed report +and another button to execute the checks just now.

Security settings tab

A click on the second tab or on the Security +Configure button leads to the same screen shown +below.

Basic security tab

+ Security levels: +

After having checked the box Enable MSEC tool, this tab +allows you by a double click to choose the security level that appears then +in bold. If the box is not checked, the level « none » is applied. The +following levels are available:

  1. Level none. This level is intended if you +do not want to use msec to control system security, and prefer tuning it on +your own. It disables all security checks and puts no restrictions or +constraints on system configuration and settings. Please use this level only +if you are knowing what you are doing, as it would leave your system +vulnerable to attack.

  2. Level standard. This is the default +configuration when installed and is intended for casual users. It +constrains several system settings and executes daily security checks which +detect changes in system files, system accounts, and vulnerable directory +permissions. (This level is similar to levels 2 and 3 from past msec +versions).

  3. Level secure. This level is intended when +you want to ensure your system is secure, yet usable. It further restricts +system permissions and executes more periodic checks. Moreover, access to +the system is more restricted. (This level is similar to levels 4 (High) and +5 (Paranoid) from old msec versions).

  4. Besides those levels, different task-oriented security are also provided, +such as the fileserver , webserver and netbook levels. Such levels attempt to pre-configure +system security according to the most common use cases.

  5. The last two levels called audit_daily and +audit_weekly are not really security levels +but rather tools for periodic checks only.

These levels are saved in +etc/security/msec/level.<levelname>. You can define +your own customised security levels, saving them into specific files called +level.<levelname>, placed into the folder +etc/security/msec/. This function is intended for power +users which require a customised or more secure system configuration.

Pas på

Keep in mind that user-modified parameters take precedence over default +level settings.

+ Security alerts: +

If you check the box Send security alerts by email +to:, the security alerts generated by msec are going to be sent +by local e-mail to the security administrator named in the nearby field. You +can fill either a local user or a complete e-mail address (the local e-mail +and the e-mail manager must be set accordingly). At last, you can receive +the security alerts directly on your desktop. Check the relevant box to +enable it.

Vigtigt

It is strongly advisable to enable the security alerts option in order to +immediately inform the security administrator of possible security +problems. If not, the administrator will have to regularly check the logs +files available in /var/log/security.

Security options:

Creating a customised level is not the only way to customise the computer +security, it is also possible to use the tabs presented here after to change +any option you want. Current configuration for msec is stored in +/etc/security/msec/security.conf. This file contains +the current security level name and the list of all the modifications done +to the options.

System security tab

This tab displays all the security options on the left side column, a +description in the centre column, and their current values on the right side +column.

To modify an option, double click on it and a new window appears (see +screenshot below). It displays the option name, a short description, the +actual and default values, and a drop down list where the new value can be +selected. Click on the OK button to validate the +choice.

Pas på

Do not forget when leaving msecgui to save definitively your configuration +using the menu File -> Save the configuration. If you +have changed the settings, msecgui allows you to preview the changes before +saving them.

Netværkssikkerhed

This tab displays all the network options and works like the previous tab

Periodic checks tab

Periodic checks aim to inform the security administrator by means of +security alerts of all situations msec thinks potentially dangerous.

This tab displays all the periodic checks done by msec and their frequency +if the box Enable periodic security checks is +checked. Changes are done like in the previous tabs.

Exceptions tab

Sometimes alert messages are due to well known and wanted situations. In +these cases they are useless and wasted time for the administrator. This tab +allows you to create as many exceptions as you want to avoid unwanted alert +messages. It is obviously empty at the first msec start. The screenshot +below shows four exceptions.

To create an exception, click on the Add a rule +button

Select the wanted periodic check in the drop down list called +Check and then, enter the +Exception in the text area. Adding an exception is +obviously not definitive, you can either delete it using the +Delete button of the Exceptions +tab or modify it with a double clicK.

Rettigheder

This tab is intended for file and directory permissions checking and +enforcement.

Like for the security, msec owns different permissions levels (standard, +secure, ..), they are enabled accordingly with the chosen security +level. You can create your own customised permissions levels, saving them +into specific files called perm.<levelname> placed +into the folder etc/security/msec/ . This function is +intended for power users which require a customised configuration. It is +also possible to use the tab presented here after to change any permission +you want. Current configuration is stored in +/etc/security/msec/perms.conf. This file contains the +list of all the modifications done to the permissions.

Default permissions are visible as a list of rules (a rule per line). You +can see on the left side, the file or folder concerned by the rule, then the +owner, then the group and then the permissions given by the rule. If, for a +given rule:

  • the box Enforce is not checked, msec only checks if the +defined permissions for this rule are respected and sends an alert message +if not, but does not change anything.

  • the box Enforce is checked, then msec will rule the +permissions respect at the first periodic check and overwrite the +permissions.

Vigtigt

For this to work, the option CHECK_PERMS in the Periodic check tab must be configured accordingly.

To create a new rule, click on the Add a rule button +and fill the fields as shown in the example below. The joker * is allowed in +the File field. “current” means no modification.

Click on the OK button to validate the choice and do +not forget when leaving to save definitively your configuration using the +menu File -> Save the configuration. If you have changed +the settings, msecgui allows you to preview the changes before saving them.

Bemærk

It is also possible to create or modify the rules by editing the +configuration file /etc/security/msec/perms.conf. +

Pas på

Changes in the Permission tab (or directly +in the configuration file) are taken into account at the first periodic +check (see the option CHECK_PERMS in the Periodic +checks tab). If you want them to be taken immediately into +account, use the msecperms command in a console with root rights. You can +use before, the msecperms -p command to know the permissions that will be +changed by msecperms.

Pas på

Do not forget that if you modify the permissions in a console or in a file +manager, for a file where the box Enforce is checked +in the Permissions tab , msecgui will write +the old permissions back after a while, accordingly to the configuration of +the options CHECK_PERMS and CHECK_PERMS_ENFORCE in the Periodic Checks tab .

Opsætning af personlig brandmur

drakfirewall

This tool[44] is found under the Security +tab in the Mageia Control Center labelled "Set up your personal +firewall". It is the same tool in the first tab of "Configure system +security, permissions and audit".

A basic firewall is installed by default with Mageia. All the incoming +connections from the outside are blocked if they aren't authorised. In the +first screen above, you can select the services for which outside connection +attempts are accepted. For your security, uncheck the first box - +Everything (no firewall) - unless you want to disable +the firewall, and only check the needed services.

It is possible to manually enter the port numbers to open. Click on +Advanced and a new window is opened. In the field +Other ports, enter the needed ports following these +examples :

80/tcp : open the port 80 tcp protocol

24000:24010/udp : open all the ports from 24000 to 24010 udp protocol

The listed ports should be separated by a space.

If the box Log firewall messages in system logs is +checked, the firewall messages will be saved in system logs

Bemærk

If you don't host specific services (web or mail server, file sharing, ...) +it is completely possible to have nothing checked at all, it is even +recommended, it won't prevent you from connecting to the internet.

The next screen deals with the Interactive Firewall options. These feature +allow you to be warned of connection attempts if at least the first box +Use Interactive Firewall is checked. Check the second +box to be warned if the ports are scanned (in order to find a failure +somewhere and enter your machine). Each box from the third one onwards +corresponds to a port you opened in the two first screens; in the screenshot +below, there are two such boxes: SSH server and 80:150/tcp. Check them to be +warned each time a connection is attempted on those ports.

These warning are given by alert popups through the network applet.

In the last screen, choose which network interfaces are connected to the +Internet and must be protected. Once the OK button is clicked, the necessary +packages are downloaded.

Vink

If you don't know what to choose, have a look in MCC tab Network & +Internet, icon Set up a new network interface.

Konfigurér autentifikation for Mageia-værktøjer

draksec

This tool[45]is present in the Mageia +Control Center under the tab Security

It allows to give the regular users the needed rights to accomplish tasks +usually done by the administrator.

Click on the little arrow before the item you want to drop down: +

Most of the tools available in the Mageia Control Center are displayed in +the left side of the window (see the screenshot above) and for each tool, a +drop down list on the right side gives the choice between:

  • Default: The launch mode depends on the chosen security level. See in the +same MCC tab, the tool "Configure system security, permissions and audit".

  • User password: The user password is asked before the tool launching.

  • Administrator password: The root password is asked before the tool launching

  • No password: The tool is launched without asking any password.

Avanceret opsætning af netværksgrænseflader og brandmur

drakinvictus

This page hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

You can start this tool from the command line, by typing drakinvictus as root.

Styring for forældre

drakguard

This tool[46] is found in the Mageia +Control Center, under the Security tab, labelled Parental +Control. If you don't see this label, you have to install the +drakguard package (not installed by default).

Presentation

Drakguard is an easy way to set up parental controls on your computer to +restrict who can do what, and at which times of day. Drakguard has three +useful capabilities:

  • It restricts web access to named users to set times of day. It does this by +controlling the shorewall firewall built into Mageia.

  • It blocks execution of particular commands by named users so these users can +only execute what you accept them to execute.

  • It restricts access to websites, both manually defined through +blacklists/whitelists, but also dynamically based on the content of the +website. To achieve this Drakguard uses the leading opensource parental +control blocker DansGuardian.

Configuring Parental controls

Advarsel

If your computer contains hard drive partitions that are formatted in Ext2, +Ext3, or ReiserFS format you will see a pop up offering to configure ACL on +your partitions. ACL stands for Access Control Lists, and is a Linux kernel +feature that allows access to individual files to be restricted to named +users. ACL is built into Ext4 and Btrfs file systems, but must be enabled by +an option in Ext2, Ext3, or Reiserfs partitions. If you select 'Yes' to this +prompt drakguard will configure all your partitions to support ACL, and will +then suggest you reboot.

Enable parental control: If checked, the parental +control is enabled and the access to Block programs tab +is opened.

Block all network traffic: If checked, all the +websites are blocked, except the ones in the whitelist tab. Otherwise, all +the websites are allowed, except the ones in the blacklist tab.

User access: Users on the left hand side will have +their access restricted according to the rules you define. Users on the +right hand side have unrestricted access so adult users of the computer are +not inconvenienced. Select a user in the left hand side and click on +Add to add him/her as an allowed user. Select an +user in the right hand side and click on Remove to +remove him/her from the allowed users.

Time control: If checked, internet access is allowed +with restrictions between the Start time and +End time. It is totally blocked outside these time +window.

Blacklist/Whitelist tab

Enter the website URL in the first field at the top and click on the +Add button.

Block Programs Tab

Block Defined Applications: Enables the use of ACL to +restrict access to specific applications. Insert the path to the +applications you wish to block.

Unblock Users list: Users listed on the right hand +side will not be subject to acl blocking.


[43] You can start this tool from the command line, by typing msecgui as root.

[44] You can start this tool from the command line, by typing drakfirewall as root.

[45] You can start this tool from the command line, by typing draksec as root.

[46] You can start this tool from the command line, by typing drakguard as root.

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
forrige   næste
 hjem 
loading table of contents...
diff --git a/mcc/8/da/content/mcc-sharing.html b/mcc/8/da/content/mcc-sharing.html new file mode 100644 index 00000000..badcff26 --- /dev/null +++ b/mcc/8/da/content/mcc-sharing.html @@ -0,0 +1,86 @@ + + + + + Fildeling

Fildeling

This screen and the one for Network Services are only +visible if the drakwizard package is installed. You can +choose between several tools to set up different servers. Click on a link +below or on “Netværkstjenester”to learn more.

Fildeling

  1. “Konfigurér FTP”

  2. “Configure webserver”

Konfigurér FTP

drakwizard proftpd

This tool[5] can help you to set up an +FTP server. +

What is FTP?

+ File Transfer Protocol (FTP) is a standard network +protocol used to transfer files from one host to another host over a +TCP-based network, such as the Internet. (From Wikipedia) +

Setting up an FTP server with drakwizard proftpd

+ Welcome to the FTP wizard. Buckle up. +

  1. Introduktion

    + The first page is just an introduction, click Next. +

  2. Selecting Server Exposer: Local Net and/or World

    + Exposing the FTP server to the Internet has it's risks. Be ready for bad +things. +

  3. Server Information

    + Enter name the sever will use to introduce itself, someone to email +complaints too and whether to allow root login access. +

  4. Server Options

    + Set listening port, jailed user, allow resumes and/or FXP +(File eXchange Protocol) +

  5. Oversigt

    + Take a second to check these options, then click +Next. +

  6. Afslut

    + You're done! Click Finish. +

Configure webserver

drakwizard apache2

This tool[6] can help you to set up a web +server. +

What is a web server?

+ Web server is the software that helps to deliver web content that can be +accessed through the Internet. (From Wikipedia) +

Setting up a web server with drakwizard apache2

+ Welcome to the web server wizard. +

  1. Introduktion

    + The first page is just an introduction, click Next. +

  2. Selecting Server Exposer: Local Net and/or World

    + Exposing the web server to the Internet has it's risks. Be ready for bad +things. +

  3. Server User Module

    + Allows users to create their own sites. +

  4. User web directory name

    + The user needs to create and populate this directory, then the server will +display it. +

  5. Server Document Root

    + Allows you to configure the path to the web servers default documents. +

  6. Oversigt

    + Take a second to check these options, then click +Next. +

  7. Afslut

    + You're done! Click Finish. +


[5] You can start this tool from the command line, by typing drakwizard proftpd as root.

[6] You can start this tool from the command line, by typing drakwizard apache2 as root.

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
forrige   næste
 hjem 
loading table of contents...
diff --git a/mcc/8/da/content/mcc-system.html b/mcc/8/da/content/mcc-system.html new file mode 100644 index 00000000..197d9294 --- /dev/null +++ b/mcc/8/da/content/mcc-system.html @@ -0,0 +1,193 @@ + + + + + System

System

In this screen you can choose between several system and administration +tools. Click on a link below to learn more.

  1. Administrér systemets tjenester

    1. “Godkendelse”

    2. “Administrér systemtjenester ved at aktivere eller deaktivere dem”

    3. “Administér, tilføj og fjern skrifttyper. Importér Windows ®-skrifttyper”

  2. Tilpasning til sprog

    1. “Håndtér dato og tid”

    2. “Administrér sprogtilpasning for dit system”

  3. Administrationsværktøjer

    1. “Vis og søg i systemlogger”

    2. “Åbn en konsol som administrator”

    3. “Brugere og grupper” = Manage users on system

    4. “Importér Windows®-dokumenter og -indstillinger”

Godkendelse

drakauth

This tool[26] enables you to modify the +manner in which you can be recognized as user of the machine or on the net.

By default, information for your authentication is stored in a file on your +computer. Modify it only if your network administrator invites you to do so +and give information about that.

Administrér systemtjenester ved at aktivere eller deaktivere dem

drakxservices

This page hasn't been written yet for lack of resources. If you think you +can write this help, please contact the Doc +team. Thanking you in advance.

You can start this tool from the command line, by typing drakxservices as root.

Administér, tilføj og fjern skrifttyper. Importér Windows ®-skrifttyper

drakfont

This tool[27] is present in the Mageia +Control Center under the System tab. It +allows you to manage the fonts available on the computer. The main screen +above shows:

  • the installed font names, styles and sizes.

  • a preview of the selected font.

  • some buttons explained here later.

Get Windows Fonts:

This button automatically adds the fonts found on the Windows partition. You +must have Microsoft Windows installed.

Options:

It allows you to specify the applications or devices (printers mostly) able +to use the fonts.

Uninstall:

This button is to remove installed fonts and possibly save some place. Be +careful when removing fonts because it may have serious consequences on the +documents that use them.

Import:

Allows you to add fonts from a third party (CD, internet, ...). The +supported formats are ttf, pfa, pfb, pcf, pfm and gsf. Click on the +Import button and then on Add, a file manager pops up where you can select the +fonts to install, click on Install when +done. They are installed in the folder /usr/share/fonts.

If the newly installed (or removed) fonts doesn't appear in the Drakfont +main screen, close and re open it to see the modifications.

Håndtér dato og tid

drakclock

This tool[28] is found under the tab System +in the Mageia Control Center labelled "Manage date and +time". In some desktop environments it is also available by a +right click / Adjust date and Time ... on the clock in the system tray.

It's a very simple tool.

On the upper left part, is the calendar. On +the screenshot above, the date is September (on the upper left), 2012 (on +the upper right), the 2nd (in blue) and it is a Sunday. Select the month +(or year) by clicking on the little arrows on each side of September (or +2012). Select the day by clicking on its number.

On the bottom left is the Network Time +Protocol synchronising, it is possible to have a clock always on +time by synchronising it with a server. Check Enable Network Time +Protocol and choose the closest server.

On the right part is the clock. It's +useless to set the clock if NTP is enabled. Three boxes display hours, +minutes and seconds (15, 28 and 22 on the screenshot). Use the little arrows +to set the clock to the correct time. The format can't be changed here, see +your desktop environment settings for that.

At least, on the bottom right, select your time zone by clicking on the +Change Time Zone button and choosing in the list the +nearest town.

Bemærk

Even if it isn't possible to choose a date or time format in this tool, they +will be displayed on your desktop in accordance with the localisation +settings.

Administrér sprogtilpasning for dit system

localedrake

This tool[29] can be found in the System +section of the Mageia Control Center (MCC) labelled "Manage localization for +your system". It opens with a window in which you can choose your +language. The choice is adapted to languages selected during installation.

The Advanced button give access to activate +compatibility with old encoding (non UTF8).

The second window shows a list of countries according to the selected +language. The button Other Countries gives access to +countries not listed.

You have to restart your session after any modifications.

Input method

In the Other Countries screen you can also select an +input method (from the drop-down menu at the bottom of the list). Input +methods allow users to input multilingual characters (Chinese, Japanese, +Korean, etc).

For Asian and African locales, IBus will be set as default input method so +users should not need to configure it manually.

Other input methods (SCIM, GCIN, HIME, etc.) also provide similar functions +and can, if not available from the drop-down menu, be installed in another +part of the Mageia Control Center. See “Software Management (Install and Remove Software)”.

Vis og søg i systemlogger

logdrake

This tool[30] is found in the Mageia +Control Center System tab, labelled "View and search system +logs".

To do a search in the logs

First, enter the key string you want to look for in the Matching field and/or the key string you want to +do not wish to see amongst the answers in the field +but not matching. Then select the file(s) +to search in the Choose file field. Optionally, it is +possible to limit the search to only one day. Select it in the Calendar, using the little arrows on each side of the +month and year, and check "Show only for the selected +day". At last, click on the search button +to see the results in the window called Content of the +file. It is possible to save the results in the .txt format by +clicking on the Save button.

Bemærk

The Mageia Tools Logs houses the logs from the Mageia +configuration tools such as the Mageia Control Center tools. These logs are +updated each time a configuration is modified.

To configure a mail alert

Mail alert automatically checks the system load and +the services every hour and if necessary sends an e-mail to the configured +address.

To configure this tool, click on the Mail +Alert button and then, in the next screen, on the +Configure the mail alert system drop down button. Here, all the +running services are displayed and you can choose which ones you want to +look watch. (See screenshot above).

The following services can be watched :

  • Webmin-tjeneste

  • Postfix postserver

  • FTP-server

  • Apache World Wide Web Server

  • SSH-server

  • Samba-server

  • Xinetd-tjeneste

  • BIND Domain Name Resolve

In the next screen, select the Load value you consider +unacceptable. The load represents the demand to a process, a high load slows +the system down and a very high load may indicate that a process has gone +out of control. The default value is 3. We recommend setting the load value +to 3 times the number of processors.

In the last screen, enter the Email address of the +person to be warned and the Email server to use (local +or on the Internet).

Åbn en konsol som administrator

drakconsole

This tool[31] gives you access to a console +which is directly opened as root. We do not think that you need more +information about that.

Brugere og grupper

userdrake

This tool[32] is found under the System tab in the Mageia Control Center labelled +"Manage users on system"

The tool allows an administrator to manage the users and the groups, this +means to add or delete a user or group and to modify user and group settings +(ID, shell, ...)

When userdrake is opened, all the users existing on the system are listed in +the Users tab, and all the groups in the +Groups tab. Both tabs operate the same way.

1 Add User

This button opens a new window with all fields shown empty:

The field Full Name is intended for the +entry of a family name and first name, but it is possible to write anything +or nothing as well!

Login is the only required field.

Setting a Password is highly +recommended. There is a little shield on the right, if it is red, the +password is weak, too short or is too similar to the login name. You should +use figures, lower and upper case characters, punctuation marks, etc. The +shield will turn orange and then green as the password strength improves.

Confirm Password field is there to ensure +you entered what you intended to.

Login Shell is a drop down list that allows +you to change the shell used by the user you are adding, the options are +Bash, Dash and Sh.

Create a private group for the user, if +checked will automatically create a group with the same name and the new +user as the only member (this may be edited).

The other options should be obvious. The new user is created immediately +after you click on OK.

2 Add Group

You only need to enter the new group name, and if required, the specific +group ID.

3 Edit (a selected user)

User Data: Allows you to modify all the data given +for the user at creation (the ID can't be changed).

Account Info:

The first option is for setting an expiration date for the account. +Connection is impossible after this date. This is useful for temporary +accounts.

The second option is to lock the account, connection is impossible as long +as the account is locked.

It is also possible to change the icon.

Password Info: Allows you to set an +expiration date for the password, this forces the user to change his +password periodically.

Group: Here you can select the groups that +the user is a member of.

Bemærk

If you are modifying a connected user account, modifications will not be +effective until his/her next login.

4 Edit (with a group selected)

Group Data: Allows you to modify the group +name.

Group Users: Here you can select the users +who are members of the group

5 Delete

Select a user or a group and click on Delete to remove it. For a user, a window appears to +ask if home directory and mailbox must also be deleted. If a private group +has been created for the user, it will be deleted as well.

Advarsel

It is possible to delete a group which is not empty.

6 Refresh

The User database can be changed outside of Userdrake. Click on this icon to +refresh the display.

7 Guest Account

guest is a special account. It is intended +to give somebody temporary access to the system with total security. Login +is xguest, there is no password, and it is impossible to make modifications +to the system from this account. The personal directories are deleted at the +end of the session. This account is enabled by default, to disable it, click +in the menu on Actions -> Uninstall guest account.

Importér Windows®-dokumenter og -indstillinger

transfugdrake

This tool[33] is found under the System tab in the Mageia Control Center labeled +Import Windows(TM) documents and settings

The tool allows an administrator to import the user documents and settings +from a Windows® 2000, Windows® XP or Windows® Vista™ +installation on the same computer as the Mageia installation.

Advarsel

Please note that all the changes will be applied by transfugdrake +immediately after pressing Next.

After starting transfugdrake you will see the first wizard page with some +explanation about the tool and import options.

As soon as you read and understand the instructions, press the +Next button. This should run a detection of +Windows® installation.

When the detection step is complete you will see a page which allows you to +choose accounts in Windows® and +Mageia for the import procedure. It is possible to choose other user account +than yours own.

Bemærk

Please take into account that due to migrate-assistant (the backend of +transfugdrake) limitations Windows® +user account names with special symbols can be displayed incorrectly.

Bemærk

Migration may take some time depending on the size of the document folders.

Advarsel

Some Windows® applications +(especially drivers) may create user accounts for different purposes. For +example, NVidia drivers in Windows®are updated using +UpdatusUser. Please do not use such accounts for the +import purposes.

When you finished with the accounts selection press +Next button. The next page is used to select a method +to import documents:

Transfugdrake is designed to import Windows® data from My +Documents, My Music and My +Pictures folders. It is possible to skip import by selecting the +appropriate item in this window.

When you finished with the document import method choosing press +Next button. The next page is used to select a method +to import bookmarks:

Transfugdrake can import Internet Explorer and +Mozilla Firefox bookmarks into the bookmarks of Mageia +Mozilla Firefox instance.

Choose the preferred import option and press the Next +button.

The next page allows you to import desktop background:

Choose the preferred option and press the Next +button.

The last page of wizard shows some congratulation message. Just press the +Finish button.

Øjebliksbilleder

draksnapshot-config

This tool[34] is available in MCC's +System tab, in the Administration +tools section.

When you start this tool in MCC for the first time, you will see a message +about installing draksnapshot. Click on Install to +proceed. Draksnapshot and some other packages it needs will be installed.

Click again on Snapshots, you will see the +Settings screen. Tick Enable +Backups and, if you want to backup the whole system, +Backup the whole system.

If you only want to backup part of your directories, then choose +Advanced. You will see a little pop-up screen. Use the +Add and Remove buttons next to +the Backup list to include or exclude directories and +files from the backup. Use the same buttons next to the +Exclude list to remove subdirectories and/or files from +the chosen directories, that should not be +included in the backup. Click on Close when you are +done.

Now give the path to Where to backup, or choose the +Browse button to select the correct path. Any mounted +USB-key or external HD can be found in /run/media/your_user_name/. +

Click on Apply to make the snapshot.


[26] You can start this tool from the command line, by typing drakauth as root.

[27] You can start this tool from the command line, by typing drakfont as root.

[28] You can start this tool from the command line, by typing drakclock as root.

[29] You can also start this tool from the command line, by typing localedrake as root. +

[30] You can start this tool from the command line, by typing logdrake as root.

[31] You can start this tool from the command line, by typing drakconsole as root.

[32] You can start this tool from the command line, by typing userdrake as root.

[33] You can start this tool from the command line, by typing transfugdrake as root.

[34] You can start this tool from the command line, by typing draksnapshot-config as root.

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
forrige   næste
 hjem 
loading table of contents...
diff --git a/mcc/8/da/content/nwSearchFnt.js b/mcc/8/da/content/nwSearchFnt.js new file mode 100644 index 00000000..13327867 --- /dev/null +++ b/mcc/8/da/content/nwSearchFnt.js @@ -0,0 +1,524 @@ +/*---------------------------------------------------------------------------- + * JavaScript for webhelp search + *---------------------------------------------------------------------------- + This file is part of the webhelpsearch plugin for DocBook WebHelp + Copyright (c) 2007-2008 NexWave Solutions All Rights Reserved. + www.nexwave.biz Nadege Quaine + http://kasunbg.blogspot.com/ Kasun Gajasinghe + */ + +//string initialization +var htmlfileList = "htmlFileList.js"; +var htmlfileinfoList = "htmlFileInfoList.js"; +var useCJKTokenizing = false; + +/* Cette fonction verifie la validite de la recherche entrre par l utilisateur */ +function Verifie(ditaSearch_Form) { + + // Check browser compatibitily + if (navigator.userAgent.indexOf("Konquerer") > -1) { + + alert(txt_browser_not_supported); + return; + } + + + var expressionInput = document.ditaSearch_Form.textToSearch.value; + //Set a cookie to store the searched keywords + $.cookie('textToSearch', expressionInput); + + + if (expressionInput.length < 1) { + + // expression is invalid + alert(txt_enter_at_least_1_char); + // reactive la fenetre de search (utile car cadres) + document.ditaSearch_Form.textToSearch.focus(); + } + else { + + // Effectuer la recherche + Effectuer_recherche(expressionInput); + + // reactive la fenetre de search (utile car cadres) + document.ditaSearch_Form.textToSearch.focus(); + } +} + +var stemQueryMap = new Array(); // A hashtable which maps stems to query words + +/* This function parses the search expression, loads the indices and displays the results*/ +function Effectuer_recherche(expressionInput) { + + /* Display a waiting message */ + //DisplayWaitingMessage(); + + /*data initialisation*/ + var searchFor = ""; // expression en lowercase et sans les caracte res speciaux + //w = new Object(); // hashtable, key=word, value = list of the index of the html files + scriptLetterTab = new Scriptfirstchar(); // Array containing the first letter of each word to look for + var wordsList = new Array(); // Array with the words to look for + var finalWordsList = new Array(); // Array with the words to look for after removing spaces + var linkTab = new Array(); + var fileAndWordList = new Array(); + var txt_wordsnotfound = ""; + + + /*nqu: expressionInput, la recherche est lower cased, plus remplacement des char speciaux*/ + searchFor = expressionInput.toLowerCase().replace(/<\//g, "_st_").replace(/\$_/g, "_di_").replace(/\.|%2C|%3B|%21|%3A|@|\/|\*/g, " ").replace(/(%20)+/g, " ").replace(/_st_/g, "= 0; i--) { + if (fileAndWordList[i] != undefined) { + linkTab.push("

" + txt_results_for + " " + "" + fileAndWordList[i][0].motslisteDisplay + "" + "

"); + + linkTab.push(""); + } + } + } + + var results = ""; + if (linkTab.length > 0) { + /*writeln ("

" + txt_results_for + " " + "" + cleanwordsList + "" + "
"+"

");*/ + results = "

"; + //write("