From 62b0cf5f58001c73ad368721e2a6b32b5d386aa5 Mon Sep 17 00:00:00 2001 From: filip Date: Fri, 14 Jul 2017 20:22:43 +0200 Subject: Adding or refreshing mcc in en --- mcc/6/en/content/harddrake2.html | 72 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 mcc/6/en/content/harddrake2.html (limited to 'mcc/6/en/content/harddrake2.html') diff --git a/mcc/6/en/content/harddrake2.html b/mcc/6/en/content/harddrake2.html new file mode 100644 index 00000000..3f83ea1e --- /dev/null +++ b/mcc/6/en/content/harddrake2.html @@ -0,0 +1,72 @@ + + + + + Hardware configuration

Hardware configuration

harddrake2

This tool[11] gives a general view of the hardware of your computer. When the + tool is launched, it executes a job to look for every element of the + hardware. For that, it uses the command ldetect which refers to + a list of hardware in ldetect-lst package.

The window

The window is divided in two columns.

The left column contains a list of the detected hardware. The + devices are grouped by categories. Click on the > to expand the content + of a category. Each device can be selected in this column.

The right column displays information about the selected device. + The Help -> Fields description gives some information + about the content of the fields.

According to which type of device is selected, either one or two + buttons are available at the bottom of the right column:

  • Set current driver options: this can be + used to parameterize the module which is used in relation to the + device. This must used by experts only.

  • Run config tool: access to the tool which + can configure the device. The tool can often be accessed directly from + the MCC.

The menu

Options

The options menu gives the opportunity to check + boxes to enable automatic detection:

  • modem

  • Jaz devices

  • Zip parallel devices

By default these detections are not enabled, because + they are slow. Check the appropriate box(es) if you have this hardware + connected. Detection will be operational the next time this tool + is started.


[11] You can start this tool from the command line, by typing harddrake2 as root.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev Up Next
 Home 
loading table of contents...
-- cgit v1.2.1