From 9f6e2d6fa21b573062d4f4251ed872056329d8a2 Mon Sep 17 00:00:00 2001 From: Papoteur Date: Thu, 11 Mar 2021 18:58:15 +0100 Subject: Adding or refreshing installer in sk --- installer/8/sk/content/setupSCSI.html | 38 +++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 installer/8/sk/content/setupSCSI.html (limited to 'installer/8/sk/content/setupSCSI.html') diff --git a/installer/8/sk/content/setupSCSI.html b/installer/8/sk/content/setupSCSI.html new file mode 100644 index 00000000..fb961c1b --- /dev/null +++ b/installer/8/sk/content/setupSCSI.html @@ -0,0 +1,38 @@ + + + + + Nastavenie SCSI

Nastavenie SCSI

DrakX will normally detect hard disks correctly. However, with some older +SCSI controllers it may be unable to determine the correct drivers to use +and subsequently fail to recognise the drive.

If your device is not recognised, you will need to manually tell DrakX which +SCSI drive(s) you have. DrakX should then be able to configure the drive(s) +correctly.

© Mageia
CC BY-SA 3.0
Uploaded on 11/03/2021
Predchádzajúci   Nasledujúci
 Domov 
loading table of contents...
-- cgit v1.2.1