From d67cd81bfc753fcab108751e087e24233ee29996 Mon Sep 17 00:00:00 2001 From: filip Date: Fri, 14 Jul 2017 22:31:38 +0200 Subject: Adding or refreshing installer in sl --- installer/6/sl/content/Select-and-use-ISOs.html | 103 ++++ installer/6/sl/content/acceptLicense.html | 42 ++ installer/6/sl/content/addUser.html | 62 +++ installer/6/sl/content/add_supplemental_media.html | 44 ++ installer/6/sl/content/ask_mntpoint_s.html | 49 ++ installer/6/sl/content/chooseDesktop.html | 43 ++ installer/6/sl/content/choosePackageGroups.html | 39 ++ installer/6/sl/content/choosePackagesTree.html | 39 ++ installer/6/sl/content/configureServices.html | 37 ++ installer/6/sl/content/configureTimezoneUTC.html | 37 ++ installer/6/sl/content/configureX_card_list.html | 44 ++ installer/6/sl/content/configureX_chooser.html | 56 +++ installer/6/sl/content/configureX_monitor.html | 50 ++ installer/6/sl/content/diskdrake.html | 44 ++ installer/6/sl/content/doPartitionDisks.html | 70 +++ installer/6/sl/content/draft.png | Bin 0 -> 16150 bytes installer/6/sl/content/exitInstall.html | 39 ++ installer/6/sl/content/favicon.png | Bin 0 -> 1184 bytes installer/6/sl/content/formatPartitions.html | 40 ++ installer/6/sl/content/images/Checking.png | Bin 0 -> 63883 bytes installer/6/sl/content/images/Download.png | Bin 0 -> 38318 bytes installer/6/sl/content/images/Fdisk.png | Bin 0 -> 115598 bytes installer/6/sl/content/images/Md5sum.png | Bin 0 -> 16833 bytes installer/6/sl/content/images/Root.png | Bin 0 -> 11666 bytes installer/6/sl/content/images/dx-help.png | Bin 0 -> 11451 bytes installer/6/sl/content/images/dx-welcome-lang.png | Bin 0 -> 176562 bytes installer/6/sl/content/images/dx-welcome.png | Bin 0 -> 153732 bytes installer/6/sl/content/images/dx-welcome2.png | Bin 0 -> 402963 bytes installer/6/sl/content/images/dx-welcome4fr.png | Bin 0 -> 164018 bytes installer/6/sl/content/images/dx-welcome5def.png | Bin 0 -> 66394 bytes installer/6/sl/content/images/dx-welcome6opt.png | Bin 0 -> 163596 bytes installer/6/sl/content/images/dx-welcomeHelp1.png | Bin 0 -> 83770 bytes installer/6/sl/content/images/dx-welcomeHelp2.png | Bin 0 -> 93312 bytes .../content/images/dx2-add_supplemental_media.png | Bin 0 -> 42086 bytes .../6/sl/content/images/dx2-chooseDesktop.png | Bin 0 -> 100875 bytes .../6/sl/content/images/dx2-chooseMountpoints.png | Bin 0 -> 42819 bytes .../sl/content/images/dx2-choosePackageGroups.png | Bin 0 -> 49271 bytes .../6/sl/content/images/dx2-choosePackagesTree.png | Bin 0 -> 51724 bytes .../6/sl/content/images/dx2-configureServices.png | Bin 0 -> 43664 bytes .../sl/content/images/dx2-configureTimezoneUTC.png | Bin 0 -> 40687 bytes .../sl/content/images/dx2-configureX_card_list.png | Bin 0 -> 45652 bytes .../6/sl/content/images/dx2-configureX_chooser.png | Bin 0 -> 37382 bytes .../6/sl/content/images/dx2-configureX_monitor.png | Bin 0 -> 44014 bytes installer/6/sl/content/images/dx2-diskdrake.png | Bin 0 -> 55492 bytes installer/6/sl/content/images/dx2-diskdrake2.png | Bin 0 -> 70323 bytes .../6/sl/content/images/dx2-doPartitionDisks.png | Bin 0 -> 111333 bytes .../6/sl/content/images/dx2-doPartitionDisks2.png | Bin 0 -> 214725 bytes .../6/sl/content/images/dx2-doPartitionDisks3.png | Bin 0 -> 56694 bytes .../6/sl/content/images/dx2-doPartitionDisks4.png | Bin 0 -> 19541 bytes installer/6/sl/content/images/dx2-exitInstall.png | Bin 0 -> 42102 bytes .../6/sl/content/images/dx2-formatPartitions.png | Bin 0 -> 81294 bytes .../6/sl/content/images/dx2-installUpdates.png | Bin 0 -> 39854 bytes installer/6/sl/content/images/dx2-license.png | Bin 0 -> 55337 bytes .../6/sl/content/images/dx2-media_selection.png | Bin 0 -> 39895 bytes .../6/sl/content/images/dx2-minimal-install.png | Bin 0 -> 38262 bytes .../6/sl/content/images/dx2-securityLevel.png | Bin 0 -> 45793 bytes .../6/sl/content/images/dx2-selectCountry.png | Bin 0 -> 43424 bytes .../6/sl/content/images/dx2-selectInstallClass.png | Bin 0 -> 40442 bytes .../6/sl/content/images/dx2-selectKeyboard.png | Bin 0 -> 41866 bytes .../6/sl/content/images/dx2-selectLanguage.png | Bin 0 -> 44551 bytes installer/6/sl/content/images/dx2-selectMouse.png | Bin 0 -> 39027 bytes .../6/sl/content/images/dx2-setRootPassword.png | Bin 0 -> 42269 bytes .../6/sl/content/images/dx2-setupBootloader.png | Bin 0 -> 45963 bytes .../6/sl/content/images/dx2-setupBootloader2.png | Bin 0 -> 143264 bytes .../6/sl/content/images/dx2-setupBootloader3.png | Bin 0 -> 39054 bytes .../6/sl/content/images/dx2-setupBootloader4.png | Bin 0 -> 36427 bytes installer/6/sl/content/images/dx2-setupSCSI.png | Bin 0 -> 52972 bytes installer/6/sl/content/images/dx2-soundConfig.png | Bin 0 -> 41972 bytes .../6/sl/content/images/dx2-summaryBottom.png | Bin 0 -> 52938 bytes installer/6/sl/content/images/dx2-summaryTop.png | Bin 0 -> 50371 bytes .../6/sl/content/images/dx2-takeOverHdConfirm.png | Bin 0 -> 34484 bytes installer/6/sl/content/index.html | 38 ++ installer/6/sl/content/installUpdates.html | 37 ++ installer/6/sl/content/installer.html | 90 ++++ installer/6/sl/content/mageia-2013-200p.png | Bin 0 -> 6473 bytes installer/6/sl/content/main.js | 179 +++++++ installer/6/sl/content/media_selection.html | 46 ++ installer/6/sl/content/minimal-install.html | 45 ++ installer/6/sl/content/misc-params.html | 59 +++ installer/6/sl/content/nwSearchFnt.js | 524 +++++++++++++++++++++ installer/6/sl/content/search/default.props | 1 + installer/6/sl/content/search/en-us.props | 45 ++ installer/6/sl/content/search/es-es.props | 179 +++++++ installer/6/sl/content/search/htmlFileInfoList.js | 35 ++ installer/6/sl/content/search/htmlFileList.js | 36 ++ installer/6/sl/content/search/index-1.js | 520 ++++++++++++++++++++ installer/6/sl/content/search/index-2.js | 519 ++++++++++++++++++++ installer/6/sl/content/search/index-3.js | 515 ++++++++++++++++++++ installer/6/sl/content/search/ja-jp.props | 1 + installer/6/sl/content/search/nwSearchFnt.js | 513 ++++++++++++++++++++ installer/6/sl/content/search/punctuation.props | 31 ++ .../6/sl/content/search/stemmers/de_stemmer.js | 247 ++++++++++ .../6/sl/content/search/stemmers/en_stemmer.js | 187 ++++++++ .../6/sl/content/search/stemmers/fr_stemmer.js | 299 ++++++++++++ installer/6/sl/content/securityLevel.html | 35 ++ installer/6/sl/content/selectCountry.html | 48 ++ installer/6/sl/content/selectInstallClass.html | 50 ++ installer/6/sl/content/selectKeyboard.html | 47 ++ installer/6/sl/content/selectLanguage.html | 45 ++ installer/6/sl/content/selectMouse.html | 37 ++ installer/6/sl/content/setupBootloader.html | 72 +++ .../6/sl/content/setupBootloaderAddEntry.html | 35 ++ installer/6/sl/content/setupSCSI.html | 37 ++ installer/6/sl/content/soundConfig.html | 46 ++ installer/6/sl/content/takeOverHdConfirm.html | 36 ++ installer/6/sl/content/uninstall-Mageia.html | 47 ++ installer/6/sl/content/webhelp-custom.css | 229 +++++++++ installer/6/sl/content/webhelp-default.css | 92 ++++ installer/6/sl/index.html | 15 + 109 files changed, 5855 insertions(+) create mode 100644 installer/6/sl/content/Select-and-use-ISOs.html create mode 100644 installer/6/sl/content/acceptLicense.html create mode 100644 installer/6/sl/content/addUser.html create mode 100644 installer/6/sl/content/add_supplemental_media.html create mode 100644 installer/6/sl/content/ask_mntpoint_s.html create mode 100644 installer/6/sl/content/chooseDesktop.html create mode 100644 installer/6/sl/content/choosePackageGroups.html create mode 100644 installer/6/sl/content/choosePackagesTree.html create mode 100644 installer/6/sl/content/configureServices.html create mode 100644 installer/6/sl/content/configureTimezoneUTC.html create mode 100644 installer/6/sl/content/configureX_card_list.html create mode 100644 installer/6/sl/content/configureX_chooser.html create mode 100644 installer/6/sl/content/configureX_monitor.html create mode 100644 installer/6/sl/content/diskdrake.html create mode 100644 installer/6/sl/content/doPartitionDisks.html create mode 100644 installer/6/sl/content/draft.png create mode 100644 installer/6/sl/content/exitInstall.html create mode 100644 installer/6/sl/content/favicon.png create mode 100644 installer/6/sl/content/formatPartitions.html create mode 100644 installer/6/sl/content/images/Checking.png create mode 100644 installer/6/sl/content/images/Download.png create mode 100644 installer/6/sl/content/images/Fdisk.png create mode 100644 installer/6/sl/content/images/Md5sum.png create mode 100644 installer/6/sl/content/images/Root.png create mode 100644 installer/6/sl/content/images/dx-help.png create mode 100644 installer/6/sl/content/images/dx-welcome-lang.png create mode 100644 installer/6/sl/content/images/dx-welcome.png create mode 100644 installer/6/sl/content/images/dx-welcome2.png create mode 100644 installer/6/sl/content/images/dx-welcome4fr.png create mode 100644 installer/6/sl/content/images/dx-welcome5def.png create mode 100644 installer/6/sl/content/images/dx-welcome6opt.png create mode 100644 installer/6/sl/content/images/dx-welcomeHelp1.png create mode 100644 installer/6/sl/content/images/dx-welcomeHelp2.png create mode 100644 installer/6/sl/content/images/dx2-add_supplemental_media.png create mode 100644 installer/6/sl/content/images/dx2-chooseDesktop.png create mode 100644 installer/6/sl/content/images/dx2-chooseMountpoints.png create mode 100644 installer/6/sl/content/images/dx2-choosePackageGroups.png create mode 100644 installer/6/sl/content/images/dx2-choosePackagesTree.png create mode 100644 installer/6/sl/content/images/dx2-configureServices.png create mode 100644 installer/6/sl/content/images/dx2-configureTimezoneUTC.png create mode 100644 installer/6/sl/content/images/dx2-configureX_card_list.png create mode 100644 installer/6/sl/content/images/dx2-configureX_chooser.png create mode 100644 installer/6/sl/content/images/dx2-configureX_monitor.png create mode 100644 installer/6/sl/content/images/dx2-diskdrake.png create mode 100644 installer/6/sl/content/images/dx2-diskdrake2.png create mode 100644 installer/6/sl/content/images/dx2-doPartitionDisks.png create mode 100644 installer/6/sl/content/images/dx2-doPartitionDisks2.png create mode 100644 installer/6/sl/content/images/dx2-doPartitionDisks3.png create mode 100644 installer/6/sl/content/images/dx2-doPartitionDisks4.png create mode 100644 installer/6/sl/content/images/dx2-exitInstall.png create mode 100644 installer/6/sl/content/images/dx2-formatPartitions.png create mode 100644 installer/6/sl/content/images/dx2-installUpdates.png create mode 100644 installer/6/sl/content/images/dx2-license.png create mode 100644 installer/6/sl/content/images/dx2-media_selection.png create mode 100644 installer/6/sl/content/images/dx2-minimal-install.png create mode 100644 installer/6/sl/content/images/dx2-securityLevel.png create mode 100644 installer/6/sl/content/images/dx2-selectCountry.png create mode 100644 installer/6/sl/content/images/dx2-selectInstallClass.png create mode 100644 installer/6/sl/content/images/dx2-selectKeyboard.png create mode 100644 installer/6/sl/content/images/dx2-selectLanguage.png create mode 100644 installer/6/sl/content/images/dx2-selectMouse.png create mode 100644 installer/6/sl/content/images/dx2-setRootPassword.png create mode 100644 installer/6/sl/content/images/dx2-setupBootloader.png create mode 100644 installer/6/sl/content/images/dx2-setupBootloader2.png create mode 100644 installer/6/sl/content/images/dx2-setupBootloader3.png create mode 100644 installer/6/sl/content/images/dx2-setupBootloader4.png create mode 100644 installer/6/sl/content/images/dx2-setupSCSI.png create mode 100644 installer/6/sl/content/images/dx2-soundConfig.png create mode 100644 installer/6/sl/content/images/dx2-summaryBottom.png create mode 100644 installer/6/sl/content/images/dx2-summaryTop.png create mode 100644 installer/6/sl/content/images/dx2-takeOverHdConfirm.png create mode 100644 installer/6/sl/content/index.html create mode 100644 installer/6/sl/content/installUpdates.html create mode 100644 installer/6/sl/content/installer.html create mode 100644 installer/6/sl/content/mageia-2013-200p.png create mode 100644 installer/6/sl/content/main.js create mode 100644 installer/6/sl/content/media_selection.html create mode 100644 installer/6/sl/content/minimal-install.html create mode 100644 installer/6/sl/content/misc-params.html create mode 100644 installer/6/sl/content/nwSearchFnt.js create mode 100644 installer/6/sl/content/search/default.props create mode 100644 installer/6/sl/content/search/en-us.props create mode 100644 installer/6/sl/content/search/es-es.props create mode 100644 installer/6/sl/content/search/htmlFileInfoList.js create mode 100644 installer/6/sl/content/search/htmlFileList.js create mode 100644 installer/6/sl/content/search/index-1.js create mode 100644 installer/6/sl/content/search/index-2.js create mode 100644 installer/6/sl/content/search/index-3.js create mode 100644 installer/6/sl/content/search/ja-jp.props create mode 100644 installer/6/sl/content/search/nwSearchFnt.js create mode 100644 installer/6/sl/content/search/punctuation.props create mode 100644 installer/6/sl/content/search/stemmers/de_stemmer.js create mode 100644 installer/6/sl/content/search/stemmers/en_stemmer.js create mode 100644 installer/6/sl/content/search/stemmers/fr_stemmer.js create mode 100644 installer/6/sl/content/securityLevel.html create mode 100644 installer/6/sl/content/selectCountry.html create mode 100644 installer/6/sl/content/selectInstallClass.html create mode 100644 installer/6/sl/content/selectKeyboard.html create mode 100644 installer/6/sl/content/selectLanguage.html create mode 100644 installer/6/sl/content/selectMouse.html create mode 100644 installer/6/sl/content/setupBootloader.html create mode 100644 installer/6/sl/content/setupBootloaderAddEntry.html create mode 100644 installer/6/sl/content/setupSCSI.html create mode 100644 installer/6/sl/content/soundConfig.html create mode 100644 installer/6/sl/content/takeOverHdConfirm.html create mode 100644 installer/6/sl/content/uninstall-Mageia.html create mode 100644 installer/6/sl/content/webhelp-custom.css create mode 100644 installer/6/sl/content/webhelp-default.css create mode 100644 installer/6/sl/index.html (limited to 'installer/6') diff --git a/installer/6/sl/content/Select-and-use-ISOs.html b/installer/6/sl/content/Select-and-use-ISOs.html new file mode 100644 index 00000000..e9684176 --- /dev/null +++ b/installer/6/sl/content/Select-and-use-ISOs.html @@ -0,0 +1,103 @@ + + + + + Izbor in uporaba odtisa diska: ISO

Izbor in uporaba odtisa diska: ISO

Predstavitev

Mageia is distributed via ISO images. This page will help you to choose +which image match your needs.

There is two families of media:

  • Classical installer: After booting the media, it will follow a process +allowing to choose what to install and how to configure your target +system. This give you the maximal flexibility for a customized installation, +in particular to choose which Desktop Environment you will install.

  • LIVE media: you can boot the media in a real Mageia system without +installing it, to see what you will get after installation. The +installation process is simpler, but you get lesser choices.

Details are given in the next sections.

Vir

Definicija

Here, a medium (plural: media) is an ISO image file that allows you to +install and/or update Mageia and by extension any physical support the ISO +file is copied to.

Najdete jih tukaj.

Mediji za klasično namestitev

Skupne značilnosti

  • These ISOs use the traditional installer called drakx.

  • They are able to make a clean install or an update from previous releases.

DVD

  • Different media for 32 or 64 bit architectures.

  • Some tools are available in the Welcome screen: Rescue System, Memory Test, +Hardware Detection Tool.

  • Each DVD contains many available desktop environments and languages.

  • You'll be given the choice during the installation to add non free software.

Live media

Skupne značilnosti

  • Can be used to preview the distribution without installing it on a HDD, and +optionally install Mageia on to your HDD.

  • Each ISO contains only one desktop environment (KDE, GNOME or Xfce).

  • Different media for 32 or 64 bit architectures.

  • Live ISOs can only be used to create clean +installations, they cannot be used to upgrade from previous +releases.

  • Vsebuje lastniško programsko opremo.

Live DVD Plasma

  • Plasma desktop environment only.

  • Prisotni so vsi jeziki.

  • Different media for 32 or 64 bit architectures.

Live DVD GNOME

  • GNOME desktop environment only.

  • Prisotni so vsi jeziki.

  • Different media for 32 or 64 bit architectures.

Live DVD Xfce

  • Xfce desktop environment only.

  • Prisotni so vsi jeziki.

  • Different media for 32 or 64 bit architectures.

Boot-only CD media

Skupne značilnosti

  • Each one is a small image that contains no more than that which is needed to +start the drakx installer and find drakx-installer-stage2 and other packages +that are needed to continue and complete the install. These packages may be +on the PC hard disk, on a local drive, on a local network or on the +Internet.

  • These media are very light (less than 100 MB) and are convenient when +bandwidth is too low to download a full DVD, a PC without a DVD drive or a +PC that can't boot from a USB stick.

  • Different media for 32 or 64 bit architectures.

  • samo angleščina.

netinstall.iso

  • Contains only free software, for those people who refuse to use non-free +software.

netinstall-nonfree.iso

  • Contains non-free software (mostly drivers, codecs...) for people who need +it.

Downloading and Checking Media

Prejemanje

Once you have chosen your ISO file, you can download it using either http or +BitTorrent. In both cases, a window gives you some information, such as the +mirror in use and the possibility to change if the bandwidth is to low. If +http is chosen, you may also see something like

md5sum and sha1sum are tools to check the ISO integrity. Use only one of +them. Keep one of them for further +usage. Then this window appears:

Check the radio button Save File.

Checking the downloaded media integrity

Both checksums are hexadecimal numbers calculated by an algorithm from the +file to be downloaded. When you ask these algorithms to recalculate this +number from your downloaded file, either you have the same number and your +downloaded file is correct, or the number is different and you have a +failure. A failure infers that you should retry the download or attempt a +repair using BitTorrent.

Open a console, no need to be root, and:

- To use md5sum, type: [sam@localhost]$ md5sum +path/to/the/image/file.iso.

- To use sha1sum, type: [sam@localhost]$ sha1sum +path/to/the/image/file.iso.

and compare the obtained number on your computer (you may have to wait for a +while) with the number given by Mageia. Example:

Burn or dump the ISO

The checked ISO can now be burned to a CD or DVD or dumped to a USB +stick. These operations are not a simple copy and aim to make a bootable +medium.

Burning the ISO to a CD/DVD

Use whatever burner you wish but ensure the burning device is set correctly +to burn an image, burn data or files is not +correct. There is more information in the Mageia +wiki.

Odlaganje odtisa nosilca za namestitev na ključek USB

All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick +and then use it to boot and install the system.

Pozor

Odlaganje odtisa nosilca za namestitev na ključek USB izbriše vse njegove +datotečne sisteme. Navidezna velikost naprave bo omejena na velikost +odtisa. Izgubili boste vse podatke na njem.

To recover the original capacity, you must redo partitioning and re-format +the USB stick.

Using a graphical tool within Mageia

Uporabite lahko orodje z grafičnim vmesnikom kot je IsoDumper

Using a graphical tool within Windows

Lahko poskusite:

- Rufus z uporabo +možnosti "ISO image" "ISO slika" ;

- Win32 +Disk Imager

Using Command line within a GNU/Linux system

Pozor

It is potentially *dangerous* to do this by hand. You risk to overwrite a +disc partition if you get the device-ID wrong.

You can also use the dd tool in a console:

  1. Odprite konzolo

  2. Become root with the command su - (don't forget the +final '-' )

  3. Plug in your USB stick (do not mount it, this also means do not open any +application or file manager that could access or read it)

  4. Enter the command fdisk -l

    Alternatively, you can get the device name with the command +dmesg: at end, you see the device name starting with +sd, and sdd in this case:

    [72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd
+[72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000
+[72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[72594.770536] usb 1-1: Product: Mass Storage Device
+[72594.770537] usb 1-1: Manufacturer: JetFlash
+[72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB
+[72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
+[72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
+[72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected
+[72594.772447] scsi host8: usb-storage 1-1:1.0
+[72595.963238] scsi 8:0:0:0: Direct-Access     JetFlash Transcend 2GB    1100 PQ: 0 ANSI: 4
+[72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
+[72595.964104] sd 8:0:0:0: [sdd] Write Protect is off
+[72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00
+[72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found
+[72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through
+[72595.967251]  sdd: sdd1
+[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk

  5. Find the device name for your USB stick (by its size), for example +/dev/sdb in the screenshot above, it is a 8GB USB stick.

  6. Enter the command: # dd if=path/to/the/ISO/file of=/dev/sdX +bs=1M

    Where X=your device name eg: /dev/sdc

    Example: # dd if=/home/user/Downloads/Mageia-4-x86_64-DVD.iso +of=/dev/sdb bs=1M

  7. Enter the command: # sync

  8. Unplug your USB stick, it is done

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/acceptLicense.html b/installer/6/sl/content/acceptLicense.html new file mode 100644 index 00000000..3b7d1718 --- /dev/null +++ b/installer/6/sl/content/acceptLicense.html @@ -0,0 +1,42 @@ + + + + + Licenčna pogodba in opombe ob izdaji

Licenčna pogodba in opombe ob izdaji

Licenčna pogodba

Pred namestitvijo Mageje pozorno preberite +licenčne pogoje.

Ti licenčni pogoji se nanašajo na celotno distribucijo +Mageia. Pred nadaljevanjem jih je potrebno +sprejeti.

Za sprejem preprosto označite Sprejmem in kliknite +gumb Naprej.

Zahvaljujemo se za vaš ogled tudi če se odločite, da teh pogojev ne boste +sprejeli. S klikom na gumb Izhod se bo vaš računalnik +ponovno zagnal.

Opombe ob izdaji

Za to izdajo distribucije Mageia so na voljo +pomembne informacije, dosegljive s klikom na gumb Opombe ob +izdaji.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/addUser.html b/installer/6/sl/content/addUser.html new file mode 100644 index 00000000..d0e62fde --- /dev/null +++ b/installer/6/sl/content/addUser.html @@ -0,0 +1,62 @@ + + + + + Upravljanje z naprednimi in navadnimi uporabniki

Upravljanje z naprednimi in navadnimi uporabniki

Nastavite geslo skrbnika (uporabnika root):

V vseh namestitvah Mageje je priporočljivo +nastaviti geslo skrbnika, v Linux-u znan kot geslo root +uporabnika. Med tipkanjem gesla v polje se bo barva ščita +spremenila glede na moč gesla od rdeče do rumene in pri močnem geslu +zelene. Zaradi preverjanja pravilnosti vnosa morate geslo ponoviti v polju +niže.

Opomba

Vsa gesla so občutljiva na velikost črk. Najbolje je v njem uporabiti +mešanico velikih ter malih črk, številk in posebnih znakov.

Dodajte uporabnika

Tukaj dodajte uporabnika. Imel bo manj pravic kot skrbnik (root), a dovolj +za uporabo spleta, pisarniških programov, igranje iger in vse ostalo kar +običajni uporabnik počne z računalnikom.

  • Ikona: s klikom na ta gumb je možno spremeniti ikono +oz. sliko uporabnika.

  • Pravo ime: tukaj vnesite pravo ime uporabnika.

  • Prijavno ime: Tukaj vnesete prijavno ime uporabnika ali +pustite programu drakx uporabiti verzijo pravega imena +uporabnika. Prijavno ime razlikuje med velikostjo črk.

  • Geslo: Tukaj vnesite uporabniško geslo. Med tipkanjem +gesla v polje se bo barva ščita desno spremenila glede na moč gesla od rdeče +do rumene in pri močnem geslu zelene. (Glejte tudi Opomba)

  • Geslo (ponovno): Program drakx preverja pravilnost +vnosa, zato morate vnos gesla ponoviti.

Opomba

Vsak uporabnik, dodan med namestitvijo Mageje, bo imel domačo mapo zaščiteno +tako pred branjem kot tudi pisanjem (umask=0027)

Več uporabnikov je med namestitvijo možno dodati v koraku +Nastavitve - povzetek. Izberite Upravljanje +uporabnikov.

Dovoljenje dostopa lahko spremenite tudi po namestitvi

Napredno upravljanje z uporabniki

S klikom na gumb Napredno lahko urejate nastavitev za +tega dodanega uporabnika.

Dodatno lahko onemogočite ali omogočite prijavo gosta.

Pozor

Anything a guest with a default rbash guest account +saves to his /home directory will be erased when he logs out. The guest +should save his important files to a USB key.

  • Enable guest account: Here you can enable or disable a +guest account. The guest account allows a guest to log into and use the PC, +but he has more restricted access than normal users.

  • Shell: This drop down list allows you to change the +shell used by the user you are adding in the previous screen, options are +Bash, Dash and Sh

  • User ID: Here you can set the user ID for the user you +are adding in the previous screen. This is a number. Leave it blank unless +you know what you are doing.

  • Group ID: This lets you set the group ID. Also a +number, usually the same one as for the user. Leave it blank unless you know +what you are doing.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/add_supplemental_media.html b/installer/6/sl/content/add_supplemental_media.html new file mode 100644 index 00000000..9b45b52d --- /dev/null +++ b/installer/6/sl/content/add_supplemental_media.html @@ -0,0 +1,44 @@ + + + + + Izbira virov (nastavitev dodatnih virov namestitve)

Izbira virov (nastavitev dodatnih virov namestitve)

Ta zaslon ponuja seznam že prepoznanih odlagališč paketov. Lahko dodate še +kak drug vir, recimo DVD ali kak oddaljen vir. Ta izbor bo določil kateri +paketi bodo na voljo v naslednjih korakih.

Za omrežni vir je potrebno slediti dvema korakoma:

  1. Izbor in po potrebi aktiviranje omrežja.

  2. Izbor zrcala ali določanje URL-ja (čisto prvi vnos). Z izborom zrcala +pridobite dostop do vseh skladišč, ki jih upravlja skupnost Mageia, Npr. z +lastniško programsko opremo (Nonfree) ali Patentno zaščiteni (Tainted) in +seveda posodobitve. Z določanjem URL-ja lahko določite specifično skladišče +ali vašo lastno namestitev NFS.

Opomba

Za posodobitev 64-bitne namestitve, ki lahko vsebuje nekaj 32-bitnih paketov +je priporočljivo tukaj dodati aktivno zrcalo z označenjem enega od omrežnih +protokolov. To je potrebno, ker 64-bitna slika odtisa diska ne vsebuje +32-bitnih paketov, zato jih brez aktivnega zrcala namestitev ne more +posodobiti.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/ask_mntpoint_s.html b/installer/6/sl/content/ask_mntpoint_s.html new file mode 100644 index 00000000..2736bebc --- /dev/null +++ b/installer/6/sl/content/ask_mntpoint_s.html @@ -0,0 +1,49 @@ + + + + + Izberite priklopne točke

Izberite priklopne točke

Here you see the Linux partitions that have been found on your computer. If +you don't agree with the DrakX suggestions, you +can change the mount points.

Opomba

If you change anything, make sure you still have a / +(root) partition.

  • Every partition is shown as follows: "Device" ("Capacity", "Mount point", +"Type").

  • "Device", is made up of: "hard drive", ["hard drive number"(letter)], +"partition number" (for example, "sda5").

  • If you have many partitions, you can choose many different mount points from +the drop down menu, such as /, /home +and /var. You can even make your own mount points, for +instance /video for a partition where you want to store +your films, or /cauldron-home for the +/home partition of a cauldron install.

  • For partitions you don't need to have access to, you can leave the mount +point field blank.

Pozor

Choose Previous if you are not sure what to choose, +and then tick Custom disk partitioning. In the screen +that follows, you can click on a partition to see its type and size.

If you are sure the mount points are correct, click on +Next, and choose whether you only want to format the +partition(s) DrakX suggests, or more.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/chooseDesktop.html b/installer/6/sl/content/chooseDesktop.html new file mode 100644 index 00000000..6b5e7fd5 --- /dev/null +++ b/installer/6/sl/content/chooseDesktop.html @@ -0,0 +1,43 @@ + + + + + Izbira namizja

Izbira namizja

Depending on your selection here, you may be offered further screens to fine +tune your choice.

After the selection step(s), you will see a slide show during package +installation. The slide show can be disabled by pressing the +Details button

Choose whether you prefer to use the KDE or +Gnome desktop environment. Both come with a full +set of useful applications and tools. Tick Custom if +you want to use neither or both, or if you want something other than the +default software choices for these desktop environments. The +LXDE desktop is lighter than the previous two, +sporting less eye candy and fewer packages installed by default.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/choosePackageGroups.html b/installer/6/sl/content/choosePackageGroups.html new file mode 100644 index 00000000..35d7ebd4 --- /dev/null +++ b/installer/6/sl/content/choosePackageGroups.html @@ -0,0 +1,39 @@ + + + + + Izbira skupin paketov

Izbira skupin paketov

Packages have been sorted into groups, to make choosing what you need on +your system a lot easier. The groups are fairly self explanatory, however +more information about the content of each is available in tool-tips which +become visible as the mouse is hovered over them.

  • Delovna postaja.

  • Strežnik.

  • Grafično okolje.

  • Individual Package Selection: You can use this option to manually add or +remove packages.

Read “Minimalna namestitev” for instructions on how to do a +minimal install (without or with X & IceWM).

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/choosePackagesTree.html b/installer/6/sl/content/choosePackagesTree.html new file mode 100644 index 00000000..b990acd4 --- /dev/null +++ b/installer/6/sl/content/choosePackagesTree.html @@ -0,0 +1,39 @@ + + + + + Izbira posamičnih paketov

Izbira posamičnih paketov

Here you can add or remove any extra packages to customise your +installation.

After having made your choice, you can click on the floppy +icon at the bottom of the page to save your choice of packages +(saving to a USB key works, too). You can then use this file to install the +same packages on another system, by pressing the same button during install +and choosing to load it.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/configureServices.html b/installer/6/sl/content/configureServices.html new file mode 100644 index 00000000..9c8a8475 --- /dev/null +++ b/installer/6/sl/content/configureServices.html @@ -0,0 +1,37 @@ + + + + + Nastavite vaše storitve

Nastavite vaše storitve

Tukaj lahko izberete, katere storitve naj se (ali ne) samodejno zaženejo ob +zagonu računalnika

There are four groups, click on the triangle before a group to expand it and +see all services in it.

Izbor, ki ga naredi DrakX, je običajno primeren.

If you highlight a service, some information about it is shown in the info +box below.

Only change things when you know very well what you are doing.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/configureTimezoneUTC.html b/installer/6/sl/content/configureTimezoneUTC.html new file mode 100644 index 00000000..8194309a --- /dev/null +++ b/installer/6/sl/content/configureTimezoneUTC.html @@ -0,0 +1,37 @@ + + + + + Nastavite vaš časovni pas

Nastavite vaš časovni pas

Choose your time zone by choosing your country or a city close to you in the +same time zone.

In next screen you can choose to set your hardware clock to local time or to +GMT, also known as UTC.

Opomba

If you have more than one operating system on your computer, make sure they +are all set to local time, or all to UTC/GMT.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/configureX_card_list.html b/installer/6/sl/content/configureX_card_list.html new file mode 100644 index 00000000..338226c7 --- /dev/null +++ b/installer/6/sl/content/configureX_card_list.html @@ -0,0 +1,44 @@ + + + + + Choose an X Server (Configure your Graphic Card)

Choose an X Server (Configure your Graphic Card)

DrakX has a very comprehensive database of video cards and will usually +correctly identify your video device.

If the installer has not correctly detected your graphic card and you know +which one you have, you can select it from the tree by:

  • Proizvajalec

  • ime vaše kartice

  • in tip kartice

If you cannot find your card in the vendor lists (because it's not yet in +the database or it's an older card) you may find a suitable driver in the +Xorg category

The Xorg listing provides more than 40 generic and open source video card +drivers. If you still can't find a named driver for your card there is the +option of using the vesa driver which provides basic capabilities.

Be aware that if you select an incompatible driver you may only have access +to the Commandline Interface.

Some video card manufacturers provide proprietary drivers for Linux which +may only be available in the Nonfree repository and in some cases only from +the card manufacturers' websites.

The Nonfree repository needs to be explicitly enabled to access them. If +you didn't select it previously, you should do this after your first reboot.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/configureX_chooser.html b/installer/6/sl/content/configureX_chooser.html new file mode 100644 index 00000000..bc96e59d --- /dev/null +++ b/installer/6/sl/content/configureX_chooser.html @@ -0,0 +1,56 @@ + + + + + Nastavitev grafične kartice in monitorja

Nastavitev grafične kartice in monitorja

No matter which graphical environment (also known as desktop environment) +you chose for this install of Mageia, they are +all based on a graphical user interface system called X Window +System, or simply X. So in order for +KDE, Gnome, LXDE or +any other graphical environment to work well, the following +X settings need to be correct. Choose the correct +settings if you can see that DrakX didn't make a +choice, or if you think the choice is incorrect.

  • Graphic card: Choose your card +from the list if needed.

  • Monitor: You can choose +Plug'n Play when applicable, or choose your monitor +from the Vendor or Generic +list. Choose Custom if you prefer to manually set the +horizontal and vertical refresh rates of your monitor.

    Pozor

    Napačna frekvenca osveževanja lahko poškoduje vaš monitor

  • Resolution: Set the desired +resolution and color depth of your monitor here.

  • Test: The test button does not +always appear during install. If the button is there, you can control your +settings by pressing it. If you see a question asking you whether your +settings are correct, you can answer "yes", and the settings will be +kept. If you don't see anything, you'll return to the configuration screen +and be able to reconfigure everything until the test is good. Make +sure your settings are on the safe side if the test button isn't +available

  • Options: Here you can choose to +enable or disable various options.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/configureX_monitor.html b/installer/6/sl/content/configureX_monitor.html new file mode 100644 index 00000000..47c35818 --- /dev/null +++ b/installer/6/sl/content/configureX_monitor.html @@ -0,0 +1,50 @@ + + + + + Izberite vaš zaslon

Izberite vaš zaslon

DrakX has a very comprehensive database of monitors and will usually +correctly identify yours.

Pozor

Selecting a monitor with different characteristics could damage +your monitor or video hardware. Please don't try something without knowing +what you are doing. If in doubt you should consult your monitor +documentation

Po meri

This option allows you to set two critical parameters, the vertical refresh +rate and the horizontal sync rate. Vertical refresh determines how often the +screen is refreshed and horizontal sync is the rate at which scan lines are +displayed.

It is VERY IMPORTANT that you do not specify a monitor +type with a sync range that is beyond the capabilities of your monitor: you +may damage your monitor. If in doubt, choose a conservative setting and +consult your monitor documentation.

Plug 'n Play

This is the default option and tries to determine the monitor type from the +monitor database.

prodajalec

If the installer has not correctly detected your monitor and you know which +one you have, you can select it from the tree by selecting:

  • Proizvajalec

  • ime proizvajalca zaslona

  • opis zaslona

Običajen

selecting this group displays nearly 30 display configurations such as +1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is +often a good monitor selection group if you need to use the Vesa card driver +when your video hardware cannot be determined automatically. Once again it +may be wise to be conservative in your selections.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/diskdrake.html b/installer/6/sl/content/diskdrake.html new file mode 100644 index 00000000..9b4a1411 --- /dev/null +++ b/installer/6/sl/content/diskdrake.html @@ -0,0 +1,44 @@ + + + + + Razdeljevanje diska po meri s programom DiskDrake

Razdeljevanje diska po meri s programom DiskDrake

Pozor

If you wish to use encryption on your / partition you +must ensure that you have a separate /boot partition. The +encryption option for the /boot partition must NOT be +set, otherwise your system will be unbootable.

Adjust the layout of your disk(s) here. You can remove or create +partitions, change the filesystem of a partition or change its size and even +view what is in them before you start.

There is a tab for every detected hard disk or other storage device, like an +USB key. For example sda, sdb and sdc if there are three of them.

Push Clear all to wipe all partitions on the selected +storage device

For all other actions: click on the desired partition first. Then view it, +or choose a filesystem and a mount point, resize it or wipe it.

Continue until you adjusted everything to your wishes.

Klikni Končano ko bo v redu.

Opomba

If you are installing Mageia on an UEFI system, check that an ESP (EFI +System Partition) is present and correctly mounted on /boot/EFI (see below)

Opomba

If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot +partition is present with a correct type

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/doPartitionDisks.html b/installer/6/sl/content/doPartitionDisks.html new file mode 100644 index 00000000..1513c57d --- /dev/null +++ b/installer/6/sl/content/doPartitionDisks.html @@ -0,0 +1,70 @@ + + + + + Razdelitev diska

Razdelitev diska

In this screen you can see the content of your hard drive(s) and see the +solutions the DrakX partitioning wizard found for where to install +Mageia.

The options available from the list below will vary depending on your +particular hard drive(s) layout and content.

  • Uporabi obstoječe razdelke

    If this option is available, then existing Linux compatible partitions have +been found and may be used for the installation.

  • Uporabi razpoložljivi prostor

    If you have unused space on your hard drive then this option will use it for +your new Mageia installation.

  • Uporabi razpoložljivi prostor v razdelku za Windows

    If you have unused space on an existing Windows partition, the installer may +offer to use it.

    This can be a useful way of making room for your new Mageia installation, +but is a risky operation so you should make sure you have backed up all +important files!

    Note that this involves shrinking the size of the Windows partition. The +partition must be "clean", meaning that Windows must have closed down +correctly the last time it was used. It must also have been defragmented, +although this is not a guarantee that all files in the partition have been +moved out of the area that is about to be used. It is highly recommended to +back up your personal files.

    With this option, the installer displays the remaining Windows partition in +light blue and the future Mageia partition in dark blue with their intended +sizes just under. You have the possibility to adapt these sizes by clicking +and dragging the gap between both partitions. See the screen-shot below.

  • Zbriši in uporabi celoten disk.

    Ta možnost bo uporabila celoten pogon za Magejo.

    Pozor! To bo pobrisalo VSE podatke na izbrani napravi. Pazljivo!

    If you intend to use part of the disk for something else, or you already +have data on the drive that you are not prepared to lose, then do not use +this option.

  • Po meri

    S tem imate popoln nadzor nad namestitvijo na (enem ali več) vaših diskov.

Velikost razdelkov:

Namestitev bo razdelila razpoložljiv prostor po naslednjih pravilih:

  • Če je vsega razpoložljivega prostora na voljo manj kot 50 GB, bo ustvarjen +samo en razdelek in sicer korenski: /. Brez ločenega domačega razdelka: +/home.

  • Če je vsega razpoložljivega prostora na voljo več kot 50 GB, bodo ustvarjeni +trije razdelki

    • 6/19 prostora na voljo bo namenjeno korenskemu: /, a ne več kot 50 GB

    • 1/19 bo rezervirana izmenjalnemu razdelku: swap, a največ 4 GB

    • ostalih (vsaj 12/19) bo uporabljenih za domači razdelek: /home

To pomeni, da bo namestitev pri 160 GB ali več razpoložljivega prostora +ustvarila tri razdelke: 50 GB za korenskega: /, 4 GB za izmenjalnega in +preostalo za domačo mapo: /home.

Opomba

If you are using an UEFI system, the ESP (EFI System Partition) will be +automatically detected, or created if it does not exist yet, and mounted on +/boot/EFI. The "Custom" option is the only one that allows to check it has +been correctly done

Opomba

If you are using a Legacy (as known as CSM or BIOS) system with a GPT disk, +you need to create a Bios boot partition if not already existing. It is an +about 1 MiB partition with no mount point. Choose the "Custom disk +partitioning" option to be able to create it with the Installer like any +other partition, just select BIOS boot partition as filesystem type.

Pozor

Some newer drives are now using 4096 byte logical sectors, instead of the +previous standard of 512 byte logical sectors. Due to lack of available +hardware, the partitioning tool used in the installer has not been tested +with such a drive. Also some ssd drives now use an erase block size over 1 +MB. We suggest to pre-partition the drive, using an alternative partitioning +tool like gparted, if you own such a device, and to use the following +settings:

»Poravnaj z ang.: Align to« »MiB«

"Free space preceding (MiB)" "2"

Also make sure all partitions are created with an even number of megabytes.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/draft.png b/installer/6/sl/content/draft.png new file mode 100644 index 00000000..59673fe1 Binary files /dev/null and b/installer/6/sl/content/draft.png differ diff --git a/installer/6/sl/content/exitInstall.html b/installer/6/sl/content/exitInstall.html new file mode 100644 index 00000000..efc40cc3 --- /dev/null +++ b/installer/6/sl/content/exitInstall.html @@ -0,0 +1,39 @@ + + + + + Čestitke

Čestitke

You have finished installing and configuring +Mageia and it is now safe to remove the +installation medium and reboot your computer.

After reboot, in the bootloader screen, you can choose between the operating +systems on your computer (if you have more than one).

If you didn't adjust the settings for the bootloader, your Mageia install +will be automatically selected and started.

Uživajte

Visit www.mageia.org if you have any questions or want to contribute to +Mageia

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/favicon.png b/installer/6/sl/content/favicon.png new file mode 100644 index 00000000..5868d96b Binary files /dev/null and b/installer/6/sl/content/favicon.png differ diff --git a/installer/6/sl/content/formatPartitions.html b/installer/6/sl/content/formatPartitions.html new file mode 100644 index 00000000..b824ebe5 --- /dev/null +++ b/installer/6/sl/content/formatPartitions.html @@ -0,0 +1,40 @@ + + + + + Formatiranje

Formatiranje

Here you can choose which partition(s) you wish to format. Any data on +partitions not marked for formatting will be saved.

Usually at least the partitions DrakX selected, need to be formatted

Click on Advanced to choose partitions you want to +check for so called bad blocks

Namig

If you're not sure you have made the right choice, you can click on +Previous, again on Previous +and then on Custom to get back to the main screen. +In that screen you can choose to view what is in your partitions.

When you are confident about the selection, click on +Next to continue.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/images/Checking.png b/installer/6/sl/content/images/Checking.png new file mode 100644 index 00000000..f82cdc2d Binary files /dev/null and b/installer/6/sl/content/images/Checking.png differ diff --git a/installer/6/sl/content/images/Download.png b/installer/6/sl/content/images/Download.png new file mode 100644 index 00000000..b07c6c78 Binary files /dev/null and b/installer/6/sl/content/images/Download.png differ diff --git a/installer/6/sl/content/images/Fdisk.png b/installer/6/sl/content/images/Fdisk.png new file mode 100644 index 00000000..db6adc4a Binary files /dev/null and b/installer/6/sl/content/images/Fdisk.png differ diff --git a/installer/6/sl/content/images/Md5sum.png b/installer/6/sl/content/images/Md5sum.png new file mode 100644 index 00000000..736f1227 Binary files /dev/null and b/installer/6/sl/content/images/Md5sum.png differ diff --git a/installer/6/sl/content/images/Root.png b/installer/6/sl/content/images/Root.png new file mode 100644 index 00000000..1e786422 Binary files /dev/null and b/installer/6/sl/content/images/Root.png differ diff --git a/installer/6/sl/content/images/dx-help.png b/installer/6/sl/content/images/dx-help.png new file mode 100644 index 00000000..32824349 Binary files /dev/null and b/installer/6/sl/content/images/dx-help.png differ diff --git a/installer/6/sl/content/images/dx-welcome-lang.png b/installer/6/sl/content/images/dx-welcome-lang.png new file mode 100644 index 00000000..31ff500e Binary files /dev/null and b/installer/6/sl/content/images/dx-welcome-lang.png differ diff --git a/installer/6/sl/content/images/dx-welcome.png b/installer/6/sl/content/images/dx-welcome.png new file mode 100644 index 00000000..24a9447c Binary files /dev/null and b/installer/6/sl/content/images/dx-welcome.png differ diff --git a/installer/6/sl/content/images/dx-welcome2.png b/installer/6/sl/content/images/dx-welcome2.png new file mode 100644 index 00000000..3a1187de Binary files /dev/null and b/installer/6/sl/content/images/dx-welcome2.png differ diff --git a/installer/6/sl/content/images/dx-welcome4fr.png b/installer/6/sl/content/images/dx-welcome4fr.png new file mode 100644 index 00000000..c7948e7a Binary files /dev/null and b/installer/6/sl/content/images/dx-welcome4fr.png differ diff --git a/installer/6/sl/content/images/dx-welcome5def.png b/installer/6/sl/content/images/dx-welcome5def.png new file mode 100644 index 00000000..c4a00200 Binary files /dev/null and b/installer/6/sl/content/images/dx-welcome5def.png differ diff --git a/installer/6/sl/content/images/dx-welcome6opt.png b/installer/6/sl/content/images/dx-welcome6opt.png new file mode 100644 index 00000000..23dfd94c Binary files /dev/null and b/installer/6/sl/content/images/dx-welcome6opt.png differ diff --git a/installer/6/sl/content/images/dx-welcomeHelp1.png b/installer/6/sl/content/images/dx-welcomeHelp1.png new file mode 100644 index 00000000..544341b0 Binary files /dev/null and b/installer/6/sl/content/images/dx-welcomeHelp1.png differ diff --git a/installer/6/sl/content/images/dx-welcomeHelp2.png b/installer/6/sl/content/images/dx-welcomeHelp2.png new file mode 100644 index 00000000..7a15ccc6 Binary files /dev/null and b/installer/6/sl/content/images/dx-welcomeHelp2.png differ diff --git a/installer/6/sl/content/images/dx2-add_supplemental_media.png b/installer/6/sl/content/images/dx2-add_supplemental_media.png new file mode 100644 index 00000000..2cd4ea7d Binary files /dev/null and b/installer/6/sl/content/images/dx2-add_supplemental_media.png differ diff --git a/installer/6/sl/content/images/dx2-chooseDesktop.png b/installer/6/sl/content/images/dx2-chooseDesktop.png new file mode 100644 index 00000000..5a780c14 Binary files /dev/null and b/installer/6/sl/content/images/dx2-chooseDesktop.png differ diff --git a/installer/6/sl/content/images/dx2-chooseMountpoints.png b/installer/6/sl/content/images/dx2-chooseMountpoints.png new file mode 100644 index 00000000..58afa7b3 Binary files /dev/null and b/installer/6/sl/content/images/dx2-chooseMountpoints.png differ diff --git a/installer/6/sl/content/images/dx2-choosePackageGroups.png b/installer/6/sl/content/images/dx2-choosePackageGroups.png new file mode 100644 index 00000000..1fd881f2 Binary files /dev/null and b/installer/6/sl/content/images/dx2-choosePackageGroups.png differ diff --git a/installer/6/sl/content/images/dx2-choosePackagesTree.png b/installer/6/sl/content/images/dx2-choosePackagesTree.png new file mode 100644 index 00000000..86041871 Binary files /dev/null and b/installer/6/sl/content/images/dx2-choosePackagesTree.png differ diff --git a/installer/6/sl/content/images/dx2-configureServices.png b/installer/6/sl/content/images/dx2-configureServices.png new file mode 100644 index 00000000..6cf743ab Binary files /dev/null and b/installer/6/sl/content/images/dx2-configureServices.png differ diff --git a/installer/6/sl/content/images/dx2-configureTimezoneUTC.png b/installer/6/sl/content/images/dx2-configureTimezoneUTC.png new file mode 100644 index 00000000..7250514f Binary files /dev/null and b/installer/6/sl/content/images/dx2-configureTimezoneUTC.png differ diff --git a/installer/6/sl/content/images/dx2-configureX_card_list.png b/installer/6/sl/content/images/dx2-configureX_card_list.png new file mode 100644 index 00000000..e6d5f805 Binary files /dev/null and b/installer/6/sl/content/images/dx2-configureX_card_list.png differ diff --git a/installer/6/sl/content/images/dx2-configureX_chooser.png b/installer/6/sl/content/images/dx2-configureX_chooser.png new file mode 100644 index 00000000..70c7b1cc Binary files /dev/null and b/installer/6/sl/content/images/dx2-configureX_chooser.png differ diff --git a/installer/6/sl/content/images/dx2-configureX_monitor.png b/installer/6/sl/content/images/dx2-configureX_monitor.png new file mode 100644 index 00000000..2ae456b4 Binary files /dev/null and b/installer/6/sl/content/images/dx2-configureX_monitor.png differ diff --git a/installer/6/sl/content/images/dx2-diskdrake.png b/installer/6/sl/content/images/dx2-diskdrake.png new file mode 100644 index 00000000..4e765c4f Binary files /dev/null and b/installer/6/sl/content/images/dx2-diskdrake.png differ diff --git a/installer/6/sl/content/images/dx2-diskdrake2.png b/installer/6/sl/content/images/dx2-diskdrake2.png new file mode 100644 index 00000000..131faa5e Binary files /dev/null and b/installer/6/sl/content/images/dx2-diskdrake2.png differ diff --git a/installer/6/sl/content/images/dx2-doPartitionDisks.png b/installer/6/sl/content/images/dx2-doPartitionDisks.png new file mode 100644 index 00000000..b10fbef5 Binary files /dev/null and b/installer/6/sl/content/images/dx2-doPartitionDisks.png differ diff --git a/installer/6/sl/content/images/dx2-doPartitionDisks2.png b/installer/6/sl/content/images/dx2-doPartitionDisks2.png new file mode 100644 index 00000000..bfdb2736 Binary files /dev/null and b/installer/6/sl/content/images/dx2-doPartitionDisks2.png differ diff --git a/installer/6/sl/content/images/dx2-doPartitionDisks3.png b/installer/6/sl/content/images/dx2-doPartitionDisks3.png new file mode 100644 index 00000000..ba9a81ed Binary files /dev/null and b/installer/6/sl/content/images/dx2-doPartitionDisks3.png differ diff --git a/installer/6/sl/content/images/dx2-doPartitionDisks4.png b/installer/6/sl/content/images/dx2-doPartitionDisks4.png new file mode 100644 index 00000000..6e6b9395 Binary files /dev/null and b/installer/6/sl/content/images/dx2-doPartitionDisks4.png differ diff --git a/installer/6/sl/content/images/dx2-exitInstall.png b/installer/6/sl/content/images/dx2-exitInstall.png new file mode 100644 index 00000000..9b052b78 Binary files /dev/null and b/installer/6/sl/content/images/dx2-exitInstall.png differ diff --git a/installer/6/sl/content/images/dx2-formatPartitions.png b/installer/6/sl/content/images/dx2-formatPartitions.png new file mode 100644 index 00000000..b9912c1b Binary files /dev/null and b/installer/6/sl/content/images/dx2-formatPartitions.png differ diff --git a/installer/6/sl/content/images/dx2-installUpdates.png b/installer/6/sl/content/images/dx2-installUpdates.png new file mode 100644 index 00000000..f3133f6a Binary files /dev/null and b/installer/6/sl/content/images/dx2-installUpdates.png differ diff --git a/installer/6/sl/content/images/dx2-license.png b/installer/6/sl/content/images/dx2-license.png new file mode 100644 index 00000000..9bc4441f Binary files /dev/null and b/installer/6/sl/content/images/dx2-license.png differ diff --git a/installer/6/sl/content/images/dx2-media_selection.png b/installer/6/sl/content/images/dx2-media_selection.png new file mode 100644 index 00000000..e78b5797 Binary files /dev/null and b/installer/6/sl/content/images/dx2-media_selection.png differ diff --git a/installer/6/sl/content/images/dx2-minimal-install.png b/installer/6/sl/content/images/dx2-minimal-install.png new file mode 100644 index 00000000..a0bc154c Binary files /dev/null and b/installer/6/sl/content/images/dx2-minimal-install.png differ diff --git a/installer/6/sl/content/images/dx2-securityLevel.png b/installer/6/sl/content/images/dx2-securityLevel.png new file mode 100644 index 00000000..49ab8a9c Binary files /dev/null and b/installer/6/sl/content/images/dx2-securityLevel.png differ diff --git a/installer/6/sl/content/images/dx2-selectCountry.png b/installer/6/sl/content/images/dx2-selectCountry.png new file mode 100644 index 00000000..449f7a9f Binary files /dev/null and b/installer/6/sl/content/images/dx2-selectCountry.png differ diff --git a/installer/6/sl/content/images/dx2-selectInstallClass.png b/installer/6/sl/content/images/dx2-selectInstallClass.png new file mode 100644 index 00000000..faf62051 Binary files /dev/null and b/installer/6/sl/content/images/dx2-selectInstallClass.png differ diff --git a/installer/6/sl/content/images/dx2-selectKeyboard.png b/installer/6/sl/content/images/dx2-selectKeyboard.png new file mode 100644 index 00000000..8c891d87 Binary files /dev/null and b/installer/6/sl/content/images/dx2-selectKeyboard.png differ diff --git a/installer/6/sl/content/images/dx2-selectLanguage.png b/installer/6/sl/content/images/dx2-selectLanguage.png new file mode 100644 index 00000000..ecc8ecac Binary files /dev/null and b/installer/6/sl/content/images/dx2-selectLanguage.png differ diff --git a/installer/6/sl/content/images/dx2-selectMouse.png b/installer/6/sl/content/images/dx2-selectMouse.png new file mode 100644 index 00000000..4836f65a Binary files /dev/null and b/installer/6/sl/content/images/dx2-selectMouse.png differ diff --git a/installer/6/sl/content/images/dx2-setRootPassword.png b/installer/6/sl/content/images/dx2-setRootPassword.png new file mode 100644 index 00000000..1789f052 Binary files /dev/null and b/installer/6/sl/content/images/dx2-setRootPassword.png differ diff --git a/installer/6/sl/content/images/dx2-setupBootloader.png b/installer/6/sl/content/images/dx2-setupBootloader.png new file mode 100644 index 00000000..be76f9e7 Binary files /dev/null and b/installer/6/sl/content/images/dx2-setupBootloader.png differ diff --git a/installer/6/sl/content/images/dx2-setupBootloader2.png b/installer/6/sl/content/images/dx2-setupBootloader2.png new file mode 100644 index 00000000..f02820d0 Binary files /dev/null and b/installer/6/sl/content/images/dx2-setupBootloader2.png differ diff --git a/installer/6/sl/content/images/dx2-setupBootloader3.png b/installer/6/sl/content/images/dx2-setupBootloader3.png new file mode 100644 index 00000000..4d869815 Binary files /dev/null and b/installer/6/sl/content/images/dx2-setupBootloader3.png differ diff --git a/installer/6/sl/content/images/dx2-setupBootloader4.png b/installer/6/sl/content/images/dx2-setupBootloader4.png new file mode 100644 index 00000000..93f3edd1 Binary files /dev/null and b/installer/6/sl/content/images/dx2-setupBootloader4.png differ diff --git a/installer/6/sl/content/images/dx2-setupSCSI.png b/installer/6/sl/content/images/dx2-setupSCSI.png new file mode 100644 index 00000000..93a50f0b Binary files /dev/null and b/installer/6/sl/content/images/dx2-setupSCSI.png differ diff --git a/installer/6/sl/content/images/dx2-soundConfig.png b/installer/6/sl/content/images/dx2-soundConfig.png new file mode 100644 index 00000000..176e1213 Binary files /dev/null and b/installer/6/sl/content/images/dx2-soundConfig.png differ diff --git a/installer/6/sl/content/images/dx2-summaryBottom.png b/installer/6/sl/content/images/dx2-summaryBottom.png new file mode 100644 index 00000000..04962f10 Binary files /dev/null and b/installer/6/sl/content/images/dx2-summaryBottom.png differ diff --git a/installer/6/sl/content/images/dx2-summaryTop.png b/installer/6/sl/content/images/dx2-summaryTop.png new file mode 100644 index 00000000..70fcc7db Binary files /dev/null and b/installer/6/sl/content/images/dx2-summaryTop.png differ diff --git a/installer/6/sl/content/images/dx2-takeOverHdConfirm.png b/installer/6/sl/content/images/dx2-takeOverHdConfirm.png new file mode 100644 index 00000000..3829bd3c Binary files /dev/null and b/installer/6/sl/content/images/dx2-takeOverHdConfirm.png differ diff --git a/installer/6/sl/content/index.html b/installer/6/sl/content/index.html new file mode 100644 index 00000000..f3384c1f --- /dev/null +++ b/installer/6/sl/content/index.html @@ -0,0 +1,38 @@ + + + + + Namestitev s programom DrakX

Opomba

Vseh prikazanih zaslonskih posnetkov ni možno videti v vsaki +namestitvi. Njihov prikaz je odvisen od strojne opreme in vaše izbire med +namestitvijo.

Besedilo in zaslonski posnetki so licencirani z CC BY-SA 3.0 http://creativecommons.org/licenses/by-sa/3.0/.

Ta navodila so bila ustvarjena s pomočjo orodja Calenco CMS, ki ga je razvila firma +NeoDoc.

Napisali smo jih prostovoljci v svojem prostem času. Obrnite se na ekipo za +dokumentiranje, če jih želite izboljšati.

Vsebina

Izbor in uporaba odtisa diska: ISO
Predstavitev
Vir
Downloading and Checking Media
Burn or dump the ISO
DrakX, namestitveni program Mageje
Namestitveni koraki
Težave z namestitvijo in možne rešitve
Izberite jezik namestitve
Licenčna pogodba in opombe ob izdaji
Licenčna pogodba
Opombe ob izdaji
Nastavitev naprav SCSI
Namestitev ali nadgradnja
Tipkovnica
Razdelitev diska
Izberite priklopne točke
Confirm hard disk to be formatted
Razdeljevanje diska po meri s programom DiskDrake
Formatiranje
Izbira virov (nastavitev dodatnih virov namestitve)
Izbira virov z lastniško programsko opremo (Nonfree)
Izbira namizja
Izbira skupin paketov
Minimalna namestitev
Izbira posamičnih paketov
Upravljanje z naprednimi in navadnimi uporabniki
Nastavite geslo skrbnika (uporabnika root):
Dodajte uporabnika
Napredno upravljanje z uporabniki
Nastavitev grafične kartice in monitorja
Choose an X Server (Configure your Graphic Card)
Izberite vaš zaslon
Glavne možnosti zagonskega nalagalnika
Bootloader interface
Using a Mageia bootloader
Using an existing bootloader
Using chain loading
Možnosti
Add or Modify a Boot Menu Entry
Povzetek raznih nastavitev
Sistemske nastavitve
Strojne nastavitve
Nastavitve omrežja in interneta
Varnost
Nastavite vaš časovni pas
Izbor države/regije
Način vnosa
Nastavite vaše storitve
Select mouse
Nastavitve zvoka
Napredno
Stopnja varnosti
Posodobitve
Čestitke
Odstrani Magejo
Howto
© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
   Naprej
loading table of contents...
diff --git a/installer/6/sl/content/installUpdates.html b/installer/6/sl/content/installUpdates.html new file mode 100644 index 00000000..ee6204ba --- /dev/null +++ b/installer/6/sl/content/installUpdates.html @@ -0,0 +1,37 @@ + + + + + Posodobitve

Posodobitve

Since this version of Mageia was released, some +packages will have been updated or improved.

Choose yes if you wish to download and install them, +select no if you don't want to do this now, or if you +aren't connected to the Internet

Kliknite Naprej za nadaljevanje

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/installer.html b/installer/6/sl/content/installer.html new file mode 100644 index 00000000..8356373f --- /dev/null +++ b/installer/6/sl/content/installer.html @@ -0,0 +1,90 @@ + + + + + DrakX, namestitveni program Mageje

DrakX, namestitveni program Mageje

Whether you are new to GNU-Linux or an experienced user, the Mageia +Installer is designed to help make your installation or upgrade as easy as +possible.

The initial menu screen has various options, however the default one will +start the installer, which will normally be all that you will need.

Slika 1. Prikaz dobrodošlice namestitve

Here are the default welcome screens when using a Mageia DVD, The first one +with a legacy system and the second one with an UEFI system: +


From this first screen, it is possible to set some personal preferences:

  • The language (for the installation only, may be different that the chosen +language for the system) by pressing the key F2 (Legacy mode only)

    Use the arrow keys to select the language and press the key Enter.

    Here is for example, the French welcome screen when using a Live +DVD/CD. Note that the Live DVD/CD menu does not propose: Rescue +System, Memory test and Hardware +Detection Tool.

  • Change the screen resolution by pressing the F3 key (Legacy mode only).

  • Add some kernel options by pressing the F6 +key for the legacy mode or the e key for +the UEFI mode.

    If the installation fails, then it may be necessary to try again using one +of the extra options. The menu called by F6 displays a new line called +Boot options and propose four entries:

    - Default, it doesn't alter anything in the default options.

    - Safe Settings, priority is given to the safer options to the detriment of +performances.

    - Brez ACPI (vmesnik za napredne nastavitve in upravljanje z energijo) +upravljanje z energijo ni upoštevano

    - No Local APIC (Local Advanced Programmable Interrupt Controller), it is +about CPU interruptions, select this option if you are asked for.

    When you select one of these entries, it modifies the default options +displayed in the Boot Options line.

    Opomba

    In some Mageia releases, it may happen that the entries selected with the +key F6 does not appear in the Boot Options line, +however, they are really taken into account.

  • Add more kernel options by pressing the key F1 (Legacy mode only).

    Pressing F1 opens a new window with more available options. Select one with +the arrow keys and press Enter to have more details or press the Esc key to +go back to the welcome screen.

    The detailed view about the option splash. Press Esc or select +Return to Boot Options to go back to the options +list. These options can by added by hand in the Boot +options line.

    Opomba

    The help is translated in the chosen language with the F2 key.

For more information about kernel options on legacy and UEFI systems, see: +https://wiki.mageia.org/en/How_to_set_up_kernel_options

Here is the default welcome screen when using a Wired Network-based +Installation CD (Boot.iso or Boot-Nonfree.iso images):

It does not allow to change the language, the available options are +described in the screen. For more information about using a Wired +Network-based Installation CD, see the Mageia +Wiki

Pozor

Postavitev tipkovnice je sedaj Ameriška

Namestitveni koraki

The install process is divided into a number of steps, which can be followed +on the side panel of the screen.

Each step has one or more screens which may also have +Advanced buttons with extra, less commonly required, +options.

Most screens have Help buttons which give further +explanations about the current step.

Opomba

If somewhere during install you decide to stop the installation, it is +possible to reboot, but please think twice before you do this. Once a +partition has been formatted or updates have started to be installed, your +computer is no longer in the same state and rebooting it could very well +leave you with an unusable system. If in spite of this you are very sure +rebooting is what you want, go to a text terminal by pressing the three keys +Alt Ctrl F2 at the same time. After that, press +Alt Ctrl Delete simultaneously to reboot.

Težave z namestitvijo in možne rešitve

Brez grafičnega vmesnika

  • After the initial screen you did not reach the language selection +screen. This can happen with some graphic cards and older systems. Try using +low resolution by typing vgalo at the prompt.

  • If the hardware is very old, a graphical installation may not be +possible. In this case it is worth trying a text mode installation. To use +this hit ESC at the first welcome screen and confirm with ENTER. You will be +presented with a black screen with the word "boot:". Type "text" and hit +ENTER. Now continue with the installation in text mode.

Namestitev zamrzne

If the system appeared to freeze during the installation, this may be a +problem with hardware detection. In this case the automatic detection of +hardware may be bypassed and dealt with later. To try this, type +noauto at the prompt. This option may also be combined with +other options as necessary.

Težave s spominom RAM

These will rarely be needed, but in some cases the hardware may report the +available RAM incorrectly. To specify this manually, you can use the +mem=xxxM parameter, where xxx is the correct amount of +RAM. e.g. mem=256M would specify 256MB of RAM.

Dinamični razdelki

If you converted your hard disk from "basic" format to "dynamic" format on +Microsoft Windows, you must know that it is impossible to install Mageia on +this disc. To go back to a basic disk, see the Microsoft documentation: +http://msdn.microsoft.com/en-us/library/cc776315.aspx.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/mageia-2013-200p.png b/installer/6/sl/content/mageia-2013-200p.png new file mode 100644 index 00000000..a6846683 Binary files /dev/null and b/installer/6/sl/content/mageia-2013-200p.png differ diff --git a/installer/6/sl/content/main.js b/installer/6/sl/content/main.js new file mode 100644 index 00000000..011818d1 --- /dev/null +++ b/installer/6/sl/content/main.js @@ -0,0 +1,179 @@ +/** + * Miscellaneous js functions for WebHelp + * Kasun Gajasinghe, http://kasunbg.blogspot.com + * David Cramer, http://www.thingbag.net + * + */ + +$(document).ready(function() { + // $("#showHideHighlight").button(); //add jquery button styling to 'Go' button + //Generate tabs in nav-pane with JQuery + $(function() { + $("#tabs").tabs({ + cookie: { + // store cookie for 2 days. + expires: 2 + } + }); + }); + + //Generate the tree + $("#ulTreeDiv").css("display","block"); + $("#tree").treeview({ + collapsed: true, + animated: "medium", + control: "#sidetreecontrol", + persist: "cookie" + }); + + //after toc fully styled, display it. Until loading, a 'loading' image will be displayed + $("#tocLoading").css("display", "none"); + //$("#ulTreeDiv").attr("style","display:block;"); + + //.searchButton is the css class applied to 'Go' button + $(function() { + $("button", ".searchButton").button(); + + $("button", ".searchButton").click(function() {return false;}); + }); + + //'ui-tabs-1' is the cookie name which is used for the persistence of the tabs.(Content/Search tab) + if ($.cookie('ui-tabs-1') === '1') { //search tab is visible + if ($.cookie('textToSearch') != undefined && $.cookie('textToSearch').length > 0) { + document.getElementById('textToSearch').value = $.cookie('textToSearch'); + Verifie('diaSearch_Form'); + searchHighlight($.cookie('textToSearch')); + //$("#showHideHighlight").css("display","block"); + } + } + + syncToc(); //Synchronize the toc tree with the content pane, when loading the page. + //$("#doSearch").button(); //add jquery button styling to 'Go' button +}); + +/** + * Synchronize with the tableOfContents + */ +function syncToc(){ + var a = document.getElementById("webhelp-currentid"); + if (a != undefined) { + var b = a.getElementsByTagName("span")[0]; + + + if (b != undefined) { + //Setting the background for selected node. + //b.setAttribute("style", "color: white; background-color: #a7a9ac;"); + b.style.color = "#FFFFFF"; + b.style.backgroundColor = "#a7a9ac"; + } + + //shows the node related to current content. + //goes a recursive call from current node to ancestor nodes, displaying all of them. + while (a.parentNode && a.parentNode.nodeName) { + var parentNode = a.parentNode; + var nodeName = parentNode.nodeName; + + if (nodeName.toLowerCase() == "ul") { + parentNode.style.display = "block"; + + // Expand the current entry + var u = a.getElementsByTagName("ul")[0]; + if (u) { + u.style.display = "block"; + } + } else if (nodeName.toLocaleLowerCase() == "li") { + parentNode.setAttribute("class", "collapsable"); + parentNode.firstChild.setAttribute("class", "hitarea collapsable-hitarea "); + } + a = parentNode; + } + + if (b != undefined) { + b.scrollIntoView(); + } + } +} + +/** + * Code for Show/Hide TOC + * + */ +function showHideToc() { + var showHideButton = $("#showHideButton"); + var leftNavigation = $("#leftnavigation"); + var content = $("#content"); + + if (showHideButton != undefined && showHideButton.hasClass("pointLeft")) { + //Hide TOC + showHideButton.removeClass('pointLeft').addClass('pointRight'); + content.css("margin", "0 0 0 0"); + leftNavigation.css("display","none"); + showHideButton.attr("title", "Show table of contents"); + } else { + //Show the TOC + showHideButton.removeClass('pointRight').addClass('pointLeft'); + content.css("margin", "0 0 0 315px"); + leftNavigation.css("display","block"); + showHideButton.attr("title", "Hide table of contents"); + } +} + +/** + * Code for searh highlighting + */ +var highlightOn = true; +function searchHighlight(searchText) { + highlightOn = true; + if (searchText != undefined) { + var wList; + var sList = new Array(); //stem list + //Highlight the search terms + searchText = searchText.toLowerCase().replace(/<\//g, "_st_").replace(/\$_/g, "_di_").replace(/\.|%2C|%3B|%21|%3A|@|\/|\*/g, " ").replace(/(%20)+/g, " ").replace(/_st_/g, " + + + + Izbira virov z lastniško programsko opremo (Nonfree)

Izbira virov z lastniško programsko opremo (Nonfree)

Here you have the list of available repositories. Not all repositories are +available, according to which media you use for installing. The repositories +selection determines which packages will be available for selection during +the next steps.

  • The Core repository cannot be disabled as it contains +the base of the distribution.

  • The Nonfree repository includes packages that are +free-of-charge, i.e. Mageia may redistribute them, but they contain +closed-source software (hence the name - Nonfree). For example this +repository includes nVidia and ATI graphics card proprietary drivers, +firmware for various WiFi cards, etc.

  • The Tainted repository includes packages released under +a free license. The main criteria for placing packages in this repository is +that they may infringe patents and copyright laws in some countries, +e.g. Multimedia codecs needed to play various audio/video files; packages +needed to play commercial video DVD, etc.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/minimal-install.html b/installer/6/sl/content/minimal-install.html new file mode 100644 index 00000000..4526b28a --- /dev/null +++ b/installer/6/sl/content/minimal-install.html @@ -0,0 +1,45 @@ + + + + + Minimalna namestitev

Minimalna namestitev

You can choose a Minimal Installation by de-selecting everything in the +Package Group Selection screen, see “Izbira skupin paketov”.

If desired, you can additionally tick the "Individual package selection" +option in the same screen.

Minimal Installation is intended for those with specific uses in mind for +their Mageia, such as a server or a specialised +workstation. You will probably use this option combined with the "Individual +package selection" option mentioned above, to fine-tune your installation, +see “Izbira posamičnih paketov”.

If you choose this installation class, then the related screen will offer +you a few useful extras to install, such as documentation and X.

If selected, "With X" will also include IceWM as lightweight desktop +environment.

The basic documentation is provided in the form of man and info pages. It +contains the man pages from the Linux Documentation +Project and the GNU +coreutils info pages.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/misc-params.html b/installer/6/sl/content/misc-params.html new file mode 100644 index 00000000..48695372 --- /dev/null +++ b/installer/6/sl/content/misc-params.html @@ -0,0 +1,59 @@ + + + + + Povzetek raznih nastavitev

Povzetek raznih nastavitev

DrakX made smart choices for the configuration of your system depending on +the choices you made and on the hardware DrakX detected. You can check the +settings here and change them if you want after pressing +Configure.

Opomba

As a general rule, default settings are recommended and you can keep them +with 3 exceptions:

  • there are known issues with a default setting

  • the default setting has already been tried and it fails

  • something else is said in the detailed sections below

Sistemske nastavitve

  • Časovni pas

    DrakX selected a time zone for you, depending on your preferred +language. You can change it if needed. See also “Nastavite vaš časovni pas”

  • Država

    If you are not in the selected country, it is very important that you +correct the setting. See “Izbor države/regije”

  • Zagonski nalagalnik

    DrakX has made good choices for the bootloader setting.

    Do not change anything, unless you know how to configure Grub2

    Za več informacij poglejte “Glavne možnosti zagonskega nalagalnika”

  • Upravljanje z uporabniki

    You can add extra users here. They will each get their own +/home directories.

  • Storitve:

    System services refer to those small programs which run the background +(daemons). This tool allows you to enable or disable certain tasks.

    You should check carefully before changing anything here - a mistake may +prevent your computer from operating correctly.

    Za več informacij poglejte “Nastavite vaše storitve”

Strojne nastavitve

  • Tipkovnica:

    This is where you setup or change your keyboard layout which will depend on +your location, language or type of keyboard.

    Opomba

    If you notice a wrong keyboard layout and want to change it, keep in mind +that your passwords are going to change too.

  • Miška:

    Here you can add or configure other pointing devices, tablets, trackballs +etc.

  • Zvočna kartica:

    The installer uses the default driver, if there is a default one. The option +to select a different driver is only given when there is more than one +driver for your card, but none of them is the default one.

  • Grafični vmesnik:

    V tem delu lahko nastavljate (eno ali več) grafičnih kartic in zaslonov.

    Za več informacij poglejte “Nastavitev grafične kartice in monitorja”.

Nastavitve omrežja in interneta

  • Omrežje:

    You can configure your network here, but for network cards with non-free +drivers it is better to do that after reboot, in the Mageia +Control Center, if you have not yet enabled the Nonfree media +repositories.

    Pozor

    When you add a network card, do not forget to set your firewall to watch +that interface as well.

  • Posredniški strežniki:

    A Proxy Server acts as an intermediary between your computer and the wider +internet. This section allows you to configure your computer to utilize a +proxy service.

    You may need to consult your systems administrator to get the parameters you +need to enter here

Varnost

  • Stopnja varnosti:

    Here you set the Security level for your computer, in most cases the default +setting (Standard) is adequate for general use.

    Check the option which best suits your usage.

  • Požarni zid:

    A firewall is intended to be a barrier between your important data and the +rascals out there on the internet who would compromise or steal it.

    Select the services that you wish to have access to your system. Your +selections will depend on what you use your computer for. For more +information, see ???.

    Pozor

    Bear in mind that allowing everything (no firewall) may be very risky.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Nazaj   Naprej
 Domov 
loading table of contents...
diff --git a/installer/6/sl/content/nwSearchFnt.js b/installer/6/sl/content/nwSearchFnt.js new file mode 100644 index 00000000..13327867 --- /dev/null +++ b/installer/6/sl/content/nwSearchFnt.js @@ -0,0 +1,524 @@ +/*---------------------------------------------------------------------------- + * JavaScript for webhelp search + *---------------------------------------------------------------------------- + This file is part of the webhelpsearch plugin for DocBook WebHelp + Copyright (c) 2007-2008 NexWave Solutions All Rights Reserved. + www.nexwave.biz Nadege Quaine + http://kasunbg.blogspot.com/ Kasun Gajasinghe + */ + +//string initialization +var htmlfileList = "htmlFileList.js"; +var htmlfileinfoList = "htmlFileInfoList.js"; +var useCJKTokenizing = false; + +/* Cette fonction verifie la validite de la recherche entrre par l utilisateur */ +function Verifie(ditaSearch_Form) { + + // Check browser compatibitily + if (navigator.userAgent.indexOf("Konquerer") > -1) { + + alert(txt_browser_not_supported); + return; + } + + + var expressionInput = document.ditaSearch_Form.textToSearch.value; + //Set a cookie to store the searched keywords + $.cookie('textToSearch', expressionInput); + + + if (expressionInput.length < 1) { + + // expression is invalid + alert(txt_enter_at_least_1_char); + // reactive la fenetre de search (utile car cadres) + document.ditaSearch_Form.textToSearch.focus(); + } + else { + + // Effectuer la recherche + Effectuer_recherche(expressionInput); + + // reactive la fenetre de search (utile car cadres) + document.ditaSearch_Form.textToSearch.focus(); + } +} + +var stemQueryMap = new Array(); // A hashtable which maps stems to query words + +/* This function parses the search expression, loads the indices and displays the results*/ +function Effectuer_recherche(expressionInput) { + + /* Display a waiting message */ + //DisplayWaitingMessage(); + + /*data initialisation*/ + var searchFor = ""; // expression en lowercase et sans les caracte res speciaux + //w = new Object(); // hashtable, key=word, value = list of the index of the html files + scriptLetterTab = new Scriptfirstchar(); // Array containing the first letter of each word to look for + var wordsList = new Array(); // Array with the words to look for + var finalWordsList = new Array(); // Array with the words to look for after removing spaces + var linkTab = new Array(); + var fileAndWordList = new Array(); + var txt_wordsnotfound = ""; + + + /*nqu: expressionInput, la recherche est lower cased, plus remplacement des char speciaux*/ + searchFor = expressionInput.toLowerCase().replace(/<\//g, "_st_").replace(/\$_/g, "_di_").replace(/\.|%2C|%3B|%21|%3A|@|\/|\*/g, " ").replace(/(%20)+/g, " ").replace(/_st_/g, "= 0; i--) { + if (fileAndWordList[i] != undefined) { + linkTab.push("

" + txt_results_for + " " + "" + fileAndWordList[i][0].motslisteDisplay + "" + "

"); + + linkTab.push(""); + } + } + } + + var results = ""; + if (linkTab.length > 0) { + /*writeln ("

" + txt_results_for + " " + "" + cleanwordsList + "" + "
"+"

");*/ + results = "

"; + //write("