From 729c962da8c93ab16d63a25c78ae3a7e6bdaa4ed Mon Sep 17 00:00:00 2001 From: filip Date: Fri, 14 Jul 2017 22:31:31 +0200 Subject: Adding or refreshing installer in en --- installer/6/en/content/Select-and-use-ISOs.html | 121 +++++ installer/6/en/content/acceptLicense.html | 53 +++ installer/6/en/content/addUser.html | 78 +++ installer/6/en/content/add_supplemental_media.html | 57 +++ installer/6/en/content/ask_mntpoint_s.html | 62 +++ installer/6/en/content/chooseDesktop.html | 54 +++ installer/6/en/content/choosePackageGroups.html | 50 ++ installer/6/en/content/choosePackagesTree.html | 52 ++ installer/6/en/content/configureServices.html | 54 +++ installer/6/en/content/configureTimezoneUTC.html | 51 ++ installer/6/en/content/configureX_card_list.html | 59 +++ installer/6/en/content/configureX_chooser.html | 73 +++ installer/6/en/content/configureX_monitor.html | 68 +++ installer/6/en/content/diskdrake.html | 65 +++ installer/6/en/content/doPartitionDisks.html | 102 ++++ installer/6/en/content/draft.png | Bin 0 -> 16150 bytes installer/6/en/content/exitInstall.html | 52 ++ installer/6/en/content/favicon.png | Bin 0 -> 1184 bytes installer/6/en/content/firewall.html | 68 +++ installer/6/en/content/formatPartitions.html | 56 +++ installer/6/en/content/images/Checking.png | Bin 0 -> 63883 bytes installer/6/en/content/images/Download.png | Bin 0 -> 38318 bytes installer/6/en/content/images/Fdisk.png | Bin 0 -> 115598 bytes installer/6/en/content/images/Md5sum.png | Bin 0 -> 16833 bytes installer/6/en/content/images/Root.png | Bin 0 -> 11666 bytes installer/6/en/content/images/dx-help.png | Bin 0 -> 11451 bytes installer/6/en/content/images/dx-welcome-lang.png | Bin 0 -> 176562 bytes installer/6/en/content/images/dx-welcome.png | Bin 0 -> 153732 bytes installer/6/en/content/images/dx-welcome2.png | Bin 0 -> 402963 bytes installer/6/en/content/images/dx-welcome4fr.png | Bin 0 -> 164018 bytes installer/6/en/content/images/dx-welcome5def.png | Bin 0 -> 66394 bytes installer/6/en/content/images/dx-welcome6opt.png | Bin 0 -> 163596 bytes installer/6/en/content/images/dx-welcomeHelp1.png | Bin 0 -> 83770 bytes installer/6/en/content/images/dx-welcomeHelp2.png | Bin 0 -> 93312 bytes .../content/images/dx2-add_supplemental_media.png | Bin 0 -> 41209 bytes .../6/en/content/images/dx2-chooseDesktop.png | Bin 0 -> 104391 bytes .../6/en/content/images/dx2-chooseMountpoints.png | Bin 0 -> 38193 bytes .../en/content/images/dx2-choosePackageGroups.png | Bin 0 -> 87864 bytes .../6/en/content/images/dx2-choosePackagesTree.png | Bin 0 -> 50229 bytes .../6/en/content/images/dx2-configureServices.png | Bin 0 -> 42723 bytes .../en/content/images/dx2-configureTimezoneUTC.png | Bin 0 -> 41018 bytes .../en/content/images/dx2-configureX_card_list.png | Bin 0 -> 44494 bytes .../6/en/content/images/dx2-configureX_chooser.png | Bin 0 -> 36547 bytes .../6/en/content/images/dx2-configureX_monitor.png | Bin 0 -> 45725 bytes installer/6/en/content/images/dx2-diskdrake.png | Bin 0 -> 50368 bytes installer/6/en/content/images/dx2-diskdrake2.png | Bin 0 -> 70323 bytes .../6/en/content/images/dx2-doPartitionDisks.png | Bin 0 -> 109348 bytes .../6/en/content/images/dx2-doPartitionDisks2.png | Bin 0 -> 214725 bytes .../6/en/content/images/dx2-doPartitionDisks3.png | Bin 0 -> 56694 bytes .../6/en/content/images/dx2-doPartitionDisks4.png | Bin 0 -> 19541 bytes installer/6/en/content/images/dx2-exitInstall.png | Bin 0 -> 41655 bytes .../6/en/content/images/dx2-formatPartitions.png | Bin 0 -> 36070 bytes .../6/en/content/images/dx2-installUpdates.png | Bin 0 -> 38850 bytes installer/6/en/content/images/dx2-license.png | Bin 0 -> 56728 bytes .../6/en/content/images/dx2-media_selection.png | Bin 0 -> 37501 bytes .../6/en/content/images/dx2-minimal-install.png | Bin 0 -> 36224 bytes .../6/en/content/images/dx2-securityLevel.png | Bin 0 -> 45000 bytes .../6/en/content/images/dx2-selectCountry.png | Bin 0 -> 43947 bytes .../6/en/content/images/dx2-selectInstallClass.png | Bin 0 -> 33639 bytes .../6/en/content/images/dx2-selectKeyboard.png | Bin 0 -> 38703 bytes .../6/en/content/images/dx2-selectLanguage.png | Bin 0 -> 46093 bytes installer/6/en/content/images/dx2-selectMouse.png | Bin 0 -> 37314 bytes .../6/en/content/images/dx2-setRootPassword.png | Bin 0 -> 40772 bytes .../6/en/content/images/dx2-setupBootloader.png | Bin 0 -> 46137 bytes .../6/en/content/images/dx2-setupBootloader2.png | Bin 0 -> 143264 bytes .../6/en/content/images/dx2-setupBootloader3.png | Bin 0 -> 39054 bytes .../6/en/content/images/dx2-setupBootloader4.png | Bin 0 -> 36427 bytes installer/6/en/content/images/dx2-setupSCSI.png | Bin 0 -> 155207 bytes installer/6/en/content/images/dx2-soundConfig.png | Bin 0 -> 41044 bytes .../6/en/content/images/dx2-summaryBottom.png | Bin 0 -> 52341 bytes installer/6/en/content/images/dx2-summaryTop.png | Bin 0 -> 50371 bytes .../6/en/content/images/dx2-takeOverHdConfirm.png | Bin 0 -> 33719 bytes .../6/en/content/images/live-setupBootloader5.png | Bin 0 -> 6237 bytes installer/6/en/content/index.html | 61 +++ installer/6/en/content/installUpdates.html | 51 ++ installer/6/en/content/installer.html | 122 +++++ installer/6/en/content/mageia-2013-200p.png | Bin 0 -> 6473 bytes installer/6/en/content/main.js | 179 +++++++ installer/6/en/content/media_selection.html | 58 +++ installer/6/en/content/minimal-install.html | 58 +++ installer/6/en/content/misc-params.html | 101 ++++ installer/6/en/content/nwSearchFnt.js | 524 +++++++++++++++++++++ installer/6/en/content/search/default.props | 1 + installer/6/en/content/search/en-us.props | 45 ++ installer/6/en/content/search/es-es.props | 179 +++++++ installer/6/en/content/search/htmlFileInfoList.js | 36 ++ installer/6/en/content/search/htmlFileList.js | 37 ++ installer/6/en/content/search/index-1.js | 398 ++++++++++++++++ installer/6/en/content/search/index-2.js | 397 ++++++++++++++++ installer/6/en/content/search/index-3.js | 395 ++++++++++++++++ installer/6/en/content/search/ja-jp.props | 1 + installer/6/en/content/search/nwSearchFnt.js | 513 ++++++++++++++++++++ installer/6/en/content/search/punctuation.props | 31 ++ .../6/en/content/search/stemmers/de_stemmer.js | 247 ++++++++++ .../6/en/content/search/stemmers/en_stemmer.js | 187 ++++++++ .../6/en/content/search/stemmers/fr_stemmer.js | 299 ++++++++++++ installer/6/en/content/securityLevel.html | 59 +++ installer/6/en/content/selectCountry.html | 62 +++ installer/6/en/content/selectInstallClass.html | 62 +++ installer/6/en/content/selectKeyboard.html | 62 +++ installer/6/en/content/selectLanguage.html | 60 +++ installer/6/en/content/selectMouse.html | 45 ++ installer/6/en/content/setupBootloader.html | 99 ++++ .../6/en/content/setupBootloaderAddEntry.html | 49 ++ installer/6/en/content/setupSCSI.html | 49 ++ installer/6/en/content/soundConfig.html | 58 +++ installer/6/en/content/takeOverHdConfirm.html | 50 ++ installer/6/en/content/uninstall-Mageia.html | 61 +++ installer/6/en/content/webhelp-custom.css | 229 +++++++++ installer/6/en/content/webhelp-default.css | 92 ++++ installer/6/en/index.html | 15 + 111 files changed, 6147 insertions(+) create mode 100644 installer/6/en/content/Select-and-use-ISOs.html create mode 100644 installer/6/en/content/acceptLicense.html create mode 100644 installer/6/en/content/addUser.html create mode 100644 installer/6/en/content/add_supplemental_media.html create mode 100644 installer/6/en/content/ask_mntpoint_s.html create mode 100644 installer/6/en/content/chooseDesktop.html create mode 100644 installer/6/en/content/choosePackageGroups.html create mode 100644 installer/6/en/content/choosePackagesTree.html create mode 100644 installer/6/en/content/configureServices.html create mode 100644 installer/6/en/content/configureTimezoneUTC.html create mode 100644 installer/6/en/content/configureX_card_list.html create mode 100644 installer/6/en/content/configureX_chooser.html create mode 100644 installer/6/en/content/configureX_monitor.html create mode 100644 installer/6/en/content/diskdrake.html create mode 100644 installer/6/en/content/doPartitionDisks.html create mode 100644 installer/6/en/content/draft.png create mode 100644 installer/6/en/content/exitInstall.html create mode 100644 installer/6/en/content/favicon.png create mode 100644 installer/6/en/content/firewall.html create mode 100644 installer/6/en/content/formatPartitions.html create mode 100644 installer/6/en/content/images/Checking.png create mode 100644 installer/6/en/content/images/Download.png create mode 100644 installer/6/en/content/images/Fdisk.png create mode 100644 installer/6/en/content/images/Md5sum.png create mode 100644 installer/6/en/content/images/Root.png create mode 100644 installer/6/en/content/images/dx-help.png create mode 100644 installer/6/en/content/images/dx-welcome-lang.png create mode 100644 installer/6/en/content/images/dx-welcome.png create mode 100644 installer/6/en/content/images/dx-welcome2.png create mode 100644 installer/6/en/content/images/dx-welcome4fr.png create mode 100644 installer/6/en/content/images/dx-welcome5def.png create mode 100644 installer/6/en/content/images/dx-welcome6opt.png create mode 100644 installer/6/en/content/images/dx-welcomeHelp1.png create mode 100644 installer/6/en/content/images/dx-welcomeHelp2.png create mode 100644 installer/6/en/content/images/dx2-add_supplemental_media.png create mode 100644 installer/6/en/content/images/dx2-chooseDesktop.png create mode 100644 installer/6/en/content/images/dx2-chooseMountpoints.png create mode 100644 installer/6/en/content/images/dx2-choosePackageGroups.png create mode 100644 installer/6/en/content/images/dx2-choosePackagesTree.png create mode 100644 installer/6/en/content/images/dx2-configureServices.png create mode 100644 installer/6/en/content/images/dx2-configureTimezoneUTC.png create mode 100644 installer/6/en/content/images/dx2-configureX_card_list.png create mode 100644 installer/6/en/content/images/dx2-configureX_chooser.png create mode 100644 installer/6/en/content/images/dx2-configureX_monitor.png create mode 100644 installer/6/en/content/images/dx2-diskdrake.png create mode 100644 installer/6/en/content/images/dx2-diskdrake2.png create mode 100644 installer/6/en/content/images/dx2-doPartitionDisks.png create mode 100644 installer/6/en/content/images/dx2-doPartitionDisks2.png create mode 100644 installer/6/en/content/images/dx2-doPartitionDisks3.png create mode 100644 installer/6/en/content/images/dx2-doPartitionDisks4.png create mode 100644 installer/6/en/content/images/dx2-exitInstall.png create mode 100644 installer/6/en/content/images/dx2-formatPartitions.png create mode 100644 installer/6/en/content/images/dx2-installUpdates.png create mode 100644 installer/6/en/content/images/dx2-license.png create mode 100644 installer/6/en/content/images/dx2-media_selection.png create mode 100644 installer/6/en/content/images/dx2-minimal-install.png create mode 100644 installer/6/en/content/images/dx2-securityLevel.png create mode 100644 installer/6/en/content/images/dx2-selectCountry.png create mode 100644 installer/6/en/content/images/dx2-selectInstallClass.png create mode 100644 installer/6/en/content/images/dx2-selectKeyboard.png create mode 100644 installer/6/en/content/images/dx2-selectLanguage.png create mode 100644 installer/6/en/content/images/dx2-selectMouse.png create mode 100644 installer/6/en/content/images/dx2-setRootPassword.png create mode 100644 installer/6/en/content/images/dx2-setupBootloader.png create mode 100644 installer/6/en/content/images/dx2-setupBootloader2.png create mode 100644 installer/6/en/content/images/dx2-setupBootloader3.png create mode 100644 installer/6/en/content/images/dx2-setupBootloader4.png create mode 100644 installer/6/en/content/images/dx2-setupSCSI.png create mode 100644 installer/6/en/content/images/dx2-soundConfig.png create mode 100644 installer/6/en/content/images/dx2-summaryBottom.png create mode 100644 installer/6/en/content/images/dx2-summaryTop.png create mode 100644 installer/6/en/content/images/dx2-takeOverHdConfirm.png create mode 100644 installer/6/en/content/images/live-setupBootloader5.png create mode 100644 installer/6/en/content/index.html create mode 100644 installer/6/en/content/installUpdates.html create mode 100644 installer/6/en/content/installer.html create mode 100644 installer/6/en/content/mageia-2013-200p.png create mode 100644 installer/6/en/content/main.js create mode 100644 installer/6/en/content/media_selection.html create mode 100644 installer/6/en/content/minimal-install.html create mode 100644 installer/6/en/content/misc-params.html create mode 100644 installer/6/en/content/nwSearchFnt.js create mode 100644 installer/6/en/content/search/default.props create mode 100644 installer/6/en/content/search/en-us.props create mode 100644 installer/6/en/content/search/es-es.props create mode 100644 installer/6/en/content/search/htmlFileInfoList.js create mode 100644 installer/6/en/content/search/htmlFileList.js create mode 100644 installer/6/en/content/search/index-1.js create mode 100644 installer/6/en/content/search/index-2.js create mode 100644 installer/6/en/content/search/index-3.js create mode 100644 installer/6/en/content/search/ja-jp.props create mode 100644 installer/6/en/content/search/nwSearchFnt.js create mode 100644 installer/6/en/content/search/punctuation.props create mode 100644 installer/6/en/content/search/stemmers/de_stemmer.js create mode 100644 installer/6/en/content/search/stemmers/en_stemmer.js create mode 100644 installer/6/en/content/search/stemmers/fr_stemmer.js create mode 100644 installer/6/en/content/securityLevel.html create mode 100644 installer/6/en/content/selectCountry.html create mode 100644 installer/6/en/content/selectInstallClass.html create mode 100644 installer/6/en/content/selectKeyboard.html create mode 100644 installer/6/en/content/selectLanguage.html create mode 100644 installer/6/en/content/selectMouse.html create mode 100644 installer/6/en/content/setupBootloader.html create mode 100644 installer/6/en/content/setupBootloaderAddEntry.html create mode 100644 installer/6/en/content/setupSCSI.html create mode 100644 installer/6/en/content/soundConfig.html create mode 100644 installer/6/en/content/takeOverHdConfirm.html create mode 100644 installer/6/en/content/uninstall-Mageia.html create mode 100644 installer/6/en/content/webhelp-custom.css create mode 100644 installer/6/en/content/webhelp-default.css create mode 100644 installer/6/en/index.html diff --git a/installer/6/en/content/Select-and-use-ISOs.html b/installer/6/en/content/Select-and-use-ISOs.html new file mode 100644 index 00000000..ea300907 --- /dev/null +++ b/installer/6/en/content/Select-and-use-ISOs.html @@ -0,0 +1,121 @@ + + + + + Select and use ISOs

Select and use ISOs

Introduction

Mageia is distributed via ISO images. This page will help you to + choose which image match your needs.

There is two families of media:

  • Classical installer: After booting the media, it will follow a + process allowing to choose what to install and how to configure your + target system. This give you the maximal flexibility for a customized + installation, in particular to choose which Desktop Environment you + will install.

  • LIVE media: you can boot the media in a real Mageia system + without installing it, to see what you will get after installation. + The installation process is simpler, but you get lesser + choices.

Details are given in the next sections.

Media

Definition

Here, a medium (plural: media) is an ISO image file that allows + you to install and/or update Mageia and by extension any physical + support the ISO file is copied to.

You can find them here.

Classical installation media

Common features

  • These ISOs use the traditional installer called + drakx.

  • They are able to make a clean install or an update from + previous releases.

  • Different media for 32 or 64 bit architectures.

  • Some tools are available in the Welcome screen: Rescue + System, Memory Test, Hardware Detection Tool.

  • Each DVD contains many available desktop environments and + languages.

  • You'll be given the choice during the installation to add + non free software.

Live media

Common features

  • Can be used to preview the distribution without installing + it on a HDD, and optionally install Mageia on to your HDD.

  • Each ISO contains only one desktop environment (Plasma, + GNOME or Xfce).

  • Different media for 32 or 64 bit architectures.

  • Live ISOs can only be used to create + clean installations, they cannot be used to upgrade from previous + releases.

  • They contain non free software.

Live DVD Plasma

  • Plasma desktop environment only.

  • All languages are present.

  • 64 bit architecture only.

Live DVD GNOME

  • GNOME desktop environment only.

  • All languages are present.

  • 64 bit architecture only

Live DVD Xfce

  • Xfce desktop environment only.

  • All languages are present.

  • 32 or 64 bit architectures.

Boot-only CD media

Common features

  • Each one is a small image that contains no more than that + which is needed to start the drakx installer and find + drakx-installer-stage2 and other packages that are needed to + continue and complete the install. These packages may be on the PC + hard disk, on a local drive, on a local network or on the + Internet.

  • These media are very light (less than 100 MB) and are + convenient when bandwidth is too low to download a full DVD, a PC + without a DVD drive or a PC that can't boot from a USB + stick.

  • Different media for 32 or 64 bit architectures.

  • English language only.

netinstall.iso

  • Contains only free software, for those people who prefer not to use non-free software.

netinstall-nonfree.iso

  • Contains non-free software (mostly drivers, codecs...) for + people who need it.

Downloading and Checking Media

Downloading

Once you have chosen your ISO file, you can download it using either http or BitTorrent. In both cases, a window gives you some information, such as the mirror in use and an opportunity to change if the bandwidth is to low. If http is chosen, you may also see something like

md5sum and sha1sum are tools to check the ISO integrity. Use only + one of them. Keep one of them for further + usage. Then a window similar to this one appears:

Check the radio button Save File.

Checking the integrity of the downloaded media

Both checksums are hexadecimal numbers calculated by an algorithm + from the file to be downloaded. When you ask these algorithms to + recalculate this number from your downloaded file, either you have the + same number and your downloaded file is correct, or the number is + different and you have a failure. A failure infers that you should retry + the download or attempt a repair using BitTorrent.

Open a console, no need to be root, and:

- To use md5sum, type: [sam@localhost]$ md5sum + path/to/the/image/file.iso.

- To use sha1sum, type: [sam@localhost]$ sha1sum + path/to/the/image/file.iso.

and compare the obtained number on your computer (you may have to + wait for a while) with the number given by Mageia. Example:

Burn or dump the ISO

The checked ISO can now be burned to a CD or DVD or dumped to a USB + stick. These operations are not a simple copy and aim to make a bootable + medium.

Burning the ISO to a CD/DVD

Use whatever burner you wish but ensure the burning device is set + correctly to burn an image, burn data + or files is not correct. There is more information in the + Mageia wiki.

Dump the ISO to a USB stick

All Mageia ISOs are hybrids, which means you can 'dump' them to a + USB stick and then use it to boot and install the system.

Warning

"Dumping" an image onto a flash device destroys any previous + file-system on the device; any other data will be lost and the + partition capacity will be reduced to the image size.

To recover the original capacity, you must redo partitioning and + re-format the USB stick.

Using a graphical tool within Mageia

You can use a graphical tool like IsoDumper

Using a graphical tool within Windows

You could try:

- Rufus using the + "ISO image" option;

- Win32 Disk + Imager

Using Command line within a GNU/Linux system

Warning

It is potentially *dangerous* to do this by hand. You risk to + overwrite a disc partition if you get the device-ID wrong.

You can also use the dd tool in a console:

  1. Open a console

  2. Become root with the command su - + (don't forget the final '-' )

  3. Plug in your USB stick (do not mount it, this also means do + not open any application or file manager that could access or read + it)

  4. Enter the command fdisk -l

    Alternatively, you can get the device name with the command + dmesg: at end, you see the device name starting with + sd, and sdd in this + case:

    [72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd
+[72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000
+[72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[72594.770536] usb 1-1: Product: Mass Storage Device
+[72594.770537] usb 1-1: Manufacturer: JetFlash
+[72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB
+[72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
+[72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
+[72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected
+[72594.772447] scsi host8: usb-storage 1-1:1.0
+[72595.963238] scsi 8:0:0:0: Direct-Access     JetFlash Transcend 2GB    1100 PQ: 0 ANSI: 4
+[72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
+[72595.964104] sd 8:0:0:0: [sdd] Write Protect is off
+[72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00
+[72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found
+[72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through
+[72595.967251]  sdd: sdd1
+[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk

  5. Find the device name for your USB stick (by its size), for + example /dev/sdb in the screenshot above, it is a 8GB + USB stick.

  6. Enter the command: # dd if=path/to/the/ISO/file + of=/dev/sdX bs=1M

    Where X=your device name eg: /dev/sdc

    Example: # dd if=/home/user/Downloads/Mageia-6-x86_64-DVD.iso of=/dev/sdb bs=1M

  7. Enter the command: # sync

  8. Unplug your USB stick, it is done

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/acceptLicense.html b/installer/6/en/content/acceptLicense.html new file mode 100644 index 00000000..b9116c6a --- /dev/null +++ b/installer/6/en/content/acceptLicense.html @@ -0,0 +1,53 @@ + + + + + License and Release Notes

License and Release Notes

License Agreement

Before installing Mageia, please read the + license terms and conditions carefully.

These terms and conditions apply to the entire + Mageia distribution and must be accepted before + you can continue.

To accept, simply select Accept and then click + on Next.

If you decide not to accept these conditions, then we thank you for + looking. Clicking Quit will reboot your + computer.

Release Notes

Important information are given about this release of + Mageia and are accessible clicking on the + Release Notes button.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/addUser.html b/installer/6/en/content/addUser.html new file mode 100644 index 00000000..180f577b --- /dev/null +++ b/installer/6/en/content/addUser.html @@ -0,0 +1,78 @@ + + + + + User and Superuser Management

User and Superuser Management

Set Administrator (root) + Password:

It is advisable for all Mageia + installations to set a superuser or administrator's password, usually + called the root password in Linux. As you type a + password into the top box the colour of its shield will change from red to + yellow to green depending on the strength of the password. A green shield + shows you are using a strong password. You need to repeat the same + password in the box just below the first password box, this checks that + you have not mistyped the first password by comparing them.

Note

All passwords are case sensitive, it is best to use a mixture of + letters (upper and lower case), numbers and other characters in a + password.

Enter a user

Add a user here. A user has fewer rights than the superuser (root), but enough to use the internet, office applications or play games and anything else the average user does with his computer

  • Icon: if you click on this button it will change the user's icon.

  • Real Name: Insert the user's real name into this text box.

  • Login Name: Here you enter the user login name or let drakx use a version of the user's real name. The + login name is case sensitive.

  • Password: In this text box you should type + in the user password. There is a shield at the end of the text box + that indicates the strength of the password. (See also Note)

  • Password (again): Retype the user password + into this text box and drakx will check you have the same password in + each of the user password text boxes.

Note

Any user you add while installing Mageia, will have a both read + and write protected home directory (umask=0027).

You can add all extra needed users in the Configuration + - Summary step during the install. Choose User + management.

The access permissions can also be changed after the + install.

Advanced User Management

If the advanced button is clicked you are + offered a screen that allows you to edit the settings for the user you are + adding.

Additionally, you can disable or enable a + guest account.

Warning

Anything a guest with a default rbash guest + account saves to his /home directory will be erased when he logs out. + The guest should save his important files to a USB key.

  • Enable guest account: Here you can enable + or disable a guest account. The guest account allows a guest to log + into and use the PC, but he has more restricted access than normal + users.

  • Shell: This drop down list allows you to + change the shell used by the user you are adding in the previous + screen, options are Bash, Dash and Sh

  • User ID: Here you can set the user ID for + the user you are adding in the previous screen. This is a number. + Leave it blank unless you know what you are doing.

  • Group ID: This lets you set the group ID. + Also a number, usually the same one as for the user. Leave it blank + unless you know what you are doing.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/add_supplemental_media.html b/installer/6/en/content/add_supplemental_media.html new file mode 100644 index 00000000..df4c1846 --- /dev/null +++ b/installer/6/en/content/add_supplemental_media.html @@ -0,0 +1,57 @@ + + + + + Media Selection (Configure Supplemental Installation Media)

Media Selection (Configure Supplemental Installation Media)

This screen gives you the list of already recognized repositories. You + can add other sources for packages, like an optical disc or a remote + source. The source selection determines which packages will be available for + selection during the next steps.

For a network source, there are two steps to follow:

  1. Choosing and activation of the network, if not already up.

  2. Selecting a mirror or specifying a URL (very first entry). By + selecting a mirror, you have access to the selection of all repositories + managed by Mageia, like the Nonfree , the Tainted repositories and the + Updates. With the URL, you can designate a specific repository or your + own NFS installation.

Note

If you are updating a 64 bit installation which may contain some 32 + bit packages, it is advised to use this screen to add an online mirror by + ticking one of the Network protocols here. The 64 bit DVD iso only + contains 64 bit and noarch packages, it will not be able to update the 32 + bit packages. However, after adding an online mirror, installer will find + the needed 32 bit packages there.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/ask_mntpoint_s.html b/installer/6/en/content/ask_mntpoint_s.html new file mode 100644 index 00000000..b014439f --- /dev/null +++ b/installer/6/en/content/ask_mntpoint_s.html @@ -0,0 +1,62 @@ + + + + + Choose the mount points

Choose the mount points

Here you see the Linux partitions that have been found on your + computer. If you don't agree with the DrakX + suggestions, you can change the mount points.

Note

If you change anything, make sure you still have a + / (root) partition.

  • Every partition is shown as follows: "Device" ("Capacity", "Mount + point", "Type").

  • "Device", is made up of: "hard drive", ["hard drive + number"(letter)], "partition number" (for example, "sda5").

  • If you have many partitions, you can choose many different mount + points from the drop down menu, such as /, + /home and /var. You can even make + your own mount points, for instance /video for a + partition where you want to store your films, or + /cauldron-home for the /home + partition of a cauldron install.

  • For partitions you don't need to have access to, you can leave the + mount point field blank.

Warning

Choose Previous if you are not sure what to + choose, and then tick Custom disk partitioning. In + the screen that follows, you can click on a partition to see its type + and size.

If you are sure the mount points are correct, click on + Next, and choose whether you only want to format the + partition(s) DrakX suggests, or more.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/chooseDesktop.html b/installer/6/en/content/chooseDesktop.html new file mode 100644 index 00000000..aded201b --- /dev/null +++ b/installer/6/en/content/chooseDesktop.html @@ -0,0 +1,54 @@ + + + + + Desktop Selection

Desktop Selection

Depending on your selection here, you may be offered further screens + to fine tune your choice.

After the selection step(s), you will see a slide show during package + installation. The slide show can be disabled by pressing the + Details button

Choose whether you prefer to use the KDE or + Gnome desktop environment. Both come with a full + set of useful applications and tools. Tick Custom if + you want to use neither or both, or if you want something other than the + default software choices for these desktop environments. The + LXDE desktop is lighter than the previous two, + sporting less eye candy and fewer packages installed by default.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/choosePackageGroups.html b/installer/6/en/content/choosePackageGroups.html new file mode 100644 index 00000000..01b29749 --- /dev/null +++ b/installer/6/en/content/choosePackageGroups.html @@ -0,0 +1,50 @@ + + + + + Package Group Selection

Package Group Selection

Packages have been sorted into groups, to make choosing what you need + on your system a lot easier. The groups are fairly self explanatory, however + more information about the content of each is available in tool-tips which + become visible as the mouse is hovered over them.

  • Workstation.

  • Server.

  • Graphical Environment.

  • Individual Package Selection: You can use this option to manually + add or remove packages.

Read the section called “Minimal Install” for instructions on how to do a + minimal install (without or with X & IceWM).

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/choosePackagesTree.html b/installer/6/en/content/choosePackagesTree.html new file mode 100644 index 00000000..26f8a1ff --- /dev/null +++ b/installer/6/en/content/choosePackagesTree.html @@ -0,0 +1,52 @@ + + + + + Choose Individual Packages

Choose Individual + Packages

Here you can add or remove any extra packages to customise your + installation.

After having made your choice, you can click on the + floppy icon at the bottom of the page to save your + choice of packages (saving to a USB key works, too). You can then use this + file to install the same packages on another system, by pressing the same + button during install and choosing to load it.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/configureServices.html b/installer/6/en/content/configureServices.html new file mode 100644 index 00000000..6444b31e --- /dev/null +++ b/installer/6/en/content/configureServices.html @@ -0,0 +1,54 @@ + + + + + Configure your Services

Configure your + Services

Here you can set + which services should (not) start when you boot your system.

There are four + groups, click on the triangle before a group to expand it and see all + services in it.

The setting + DrakX chose are usually good.

If you highlight + a service, some information about it is shown in the info box + below.

Only change + things when you know very well what you are doing.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/configureTimezoneUTC.html b/installer/6/en/content/configureTimezoneUTC.html new file mode 100644 index 00000000..05571ff7 --- /dev/null +++ b/installer/6/en/content/configureTimezoneUTC.html @@ -0,0 +1,51 @@ + + + + + Configure your Timezone

Configure your Timezone

Choose your time zone + by choosing your country or a city close to you in the same time + zone.

In next screen you can + choose to set your hardware clock to local time or to GMT, also known as + UTC.

Note

If you have more than + one operating system on your computer, make sure they are all set to local + time, or all to UTC/GMT.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/configureX_card_list.html b/installer/6/en/content/configureX_card_list.html new file mode 100644 index 00000000..fc1f5150 --- /dev/null +++ b/installer/6/en/content/configureX_card_list.html @@ -0,0 +1,59 @@ + + + + + Choose an X Server (Configure your Graphic Card)

Choose an X Server (Configure + your Graphic Card)

DrakX has a very comprehensive database of video cards and will + usually correctly identify your video device.

If the installer has not correctly detected your graphic card and you + know which one you have, you can select it from the tree by:

  • vendor

  • then the name of your card

  • and the type of card

If you cannot find your card in the vendor lists (because it's not yet + in the database or it's an older card) you may find a suitable driver in the + Xorg category

The Xorg listing provides more than 40 generic and open source video + card drivers. If you still can't find a named driver for your card there is + the option of using the vesa driver which provides basic + capabilities.

Be aware that if you select an incompatible driver you may only have + access to the Commandline Interface.

Some video card manufacturers provide proprietary drivers for Linux + which may only be available in the Nonfree repository and in some cases only + from the card manufacturers' websites.

The Nonfree repository needs to be explicitly enabled to access them. + If you didn't select it previously, you should do this after your first + reboot.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/configureX_chooser.html b/installer/6/en/content/configureX_chooser.html new file mode 100644 index 00000000..7cefb516 --- /dev/null +++ b/installer/6/en/content/configureX_chooser.html @@ -0,0 +1,73 @@ + + + + + Graphic Card and Monitor Configuration

Graphic Card and Monitor + Configuration

No matter which graphical environment + (also known as desktop environment) you chose for this install of + Mageia, they are all based on a graphical user + interface system called X Window System, or simply + X. So in order for KDE, + Gnome, LXDE or any other graphical + environment to work well, the following X settings need + to be correct. Choose the correct settings if you can see that + DrakX didn't make a choice, or if you think the + choice is incorrect.

  • Graphic + card: Choose your card from the list if + needed.

  • Monitor: + You can choose Plug'n Play when applicable, or + choose your monitor from the Vendor or + Generic list. Choose Custom if + you prefer to manually set the horizontal and vertical refresh rates of + your monitor.

    Warning

    Incorrect refresh rates may + damage your monitor

  • Resolution: + Set the desired resolution and color depth of your monitor here.

  • Test: + The test button does not always appear during install. If the button is + there, you can control your settings by pressing it. If you see a + question asking you whether your settings are correct, you can answer + "yes", and the settings will be kept. If you don't see anything, you'll + return to the configuration screen and be able to reconfigure everything + until the test is good. Make sure your settings are on the + safe side if the test button isn't available

  • Options: + Here you can choose to enable or disable various options.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/configureX_monitor.html b/installer/6/en/content/configureX_monitor.html new file mode 100644 index 00000000..fc728f0b --- /dev/null +++ b/installer/6/en/content/configureX_monitor.html @@ -0,0 +1,68 @@ + + + + + Choosing your Monitor

Choosing your Monitor

DrakX has a very + comprehensive database of monitors and will usually correctly identify + yours.

Warning

Selecting a + monitor with different characteristics could damage your monitor or video + hardware. Please don't try something without knowing what you are + doing. If in doubt you should consult your monitor + documentation

Custom

This option allows you to + set two critical parameters, the vertical refresh rate and the horizontal + sync rate. Vertical refresh determines how often the screen is refreshed and + horizontal sync is the rate at which scan lines are displayed.

It is VERY + IMPORTANT that you do not specify a monitor type with a sync + range that is beyond the capabilities of your monitor: you may damage your + monitor. If in doubt, choose a conservative setting and consult your monitor + documentation.

Plug 'n + Play

This is the default + option and tries to determine the monitor type from the monitor + database.

Vendor

If the installer has not + correctly detected your monitor and you know which one you have, you can + select it from the tree by selecting:

  • vendor

  • the monitor manufacturers name

  • the monitor description

Generic

selecting this group + displays nearly 30 display configurations such as 1024x768 @ 60Hz and + includes Flat panel displays as used in laptops. This is often a good + monitor selection group if you need to use the Vesa card driver when your + video hardware cannot be determined automatically. Once again it may be wise + to be conservative in your selections.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/diskdrake.html b/installer/6/en/content/diskdrake.html new file mode 100644 index 00000000..7e3c9bfa --- /dev/null +++ b/installer/6/en/content/diskdrake.html @@ -0,0 +1,65 @@ + + + + + Custom disk partitioning with DiskDrake

Custom disk partitioning with + DiskDrake

Warning

If you wish to use encryption on + your / partition you must ensure that you have a + separate /boot partition. The encryption option for the + /boot partition must NOT be set, otherwise your system + will be unbootable.

Adjust the layout of your disk(s) + here. You can remove or create partitions, change the filesystem of a + partition or change its size and even view what is in them before you + start.

There is a tab for every detected + hard disk or other storage device, like an USB key. For example sda, sdb and + sdc if there are three of them.

Push Clear + all to wipe all partitions on the selected storage device

For all other actions: click on + the desired partition first. Then view it, or choose a filesystem and a + mount point, resize it or wipe it. Toggle to expert + mode (or Expert mode) gives some more + tools like to add a label or to choose a partition type.

Continue until you adjusted + everything to your wishes.

Click Done + when you're ready.

Note

If you are installing Mageia on an UEFI system, check that an ESP + (EFI System Partition) is present and correctly mounted on /boot/EFI (see + below)

Note

If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot partition is present and of the correct type

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/doPartitionDisks.html b/installer/6/en/content/doPartitionDisks.html new file mode 100644 index 00000000..e17c49bb --- /dev/null +++ b/installer/6/en/content/doPartitionDisks.html @@ -0,0 +1,102 @@ + + + + + Partitioning

Partitioning

In this screen you can see + the content of your hard drive(s) and see the solutions the DrakX + partitioning wizard found for where to install + Mageia.

The options available from + the list below will vary depending on your particular hard drive(s) layout + and content.

  • Use Existing + Partitions

    If this option is + available, then existing Linux compatible partitions have been found + and may be used for the installation.

  • Use Free Space

    If you have unused + space on your hard drive then this option will use it for your new + Mageia installation.

  • Use Free Space on a + Windows Partition

    If you have unused + space on an existing Windows partition, the installer may offer to use + it.

    This can be a useful + way of making room for your new Mageia installation, but is a risky + operation so you should make sure you have backed up all important + files!

    Note that this + involves shrinking the size of the Windows partition. The partition + must be "clean", meaning that Windows must have closed down correctly + the last time it was used. It must also have been defragmented, + although this is not a guarantee that all files in the partition have + been moved out of the area that is about to be used. It is highly + recommended to back up your personal files.

    With this option, the installer displays the remaining Windows + partition in light blue and the future Mageia partition in dark blue + with their intended sizes just under. You have the possibility to + adapt these sizes by clicking and dragging the gap between both + partitions. See the screen-shot below.

  • Erase and use Entire + Disk.

    This option will use + the complete drive for Mageia.

    Note! This will + erase ALL data on the selected hard drive. Take care!

    If you intend to use + part of the disk for something else, or you already have data on the + drive that you are not prepared to lose, then do not use this + option.

  • Custom disk + partitioning

    This gives you + complete control over the placing of the installation on your hard + drive(s).

Partition sizing:

The installer will share the available place out according to the + following rules:

  • If the total available place is lower than 50 GB, only one + partition is created for /, there is no separate partition for + /home.

  • If the total available place is over 50 GB, then three + partitions are created

    • 6/19 of the total available place is allocated to / with a + maximum of 50 GB

    • 1/19 is allocated to swap with a maximum of 4 GB

    • the rest (at least 12/19) is allocated to /home

That means that from 160 GB and over of available place, the installer + will create three partitions: 50 GB for /, 4 GB for swap and the rest for + /home.

Note

If you are using an UEFI system, the ESP (EFI System Partition) will + be automatically detected, or created if it does not exist yet, and + mounted on /boot/EFI. The "Custom disk partitioning" option is the only + one that allows to check it has been correctly done

Note

If you are using a Legacy (as known as CSM or BIOS) system with a + GPT disk, you need to create a Bios boot partition if not already + existing. It is an about 1 MiB partition with no mount point. Choose the section called “Custom disk partitioning with + DiskDrake” to be able to create it with the Installer like any + other partition, just select BIOS boot partition as filesystem + type.

Warning

Some newer drives are now using 4096 byte logical sectors, instead + of the previous standard of 512 byte logical sectors. Due to lack of + available hardware, the partitioning tool used in the installer has not + been tested with such a drive. Also some ssd drives now use an erase block + size over 1 MB. We suggest to pre-partition the drive, using an + alternative partitioning tool like gparted, if you own such a device, and + to use the following settings:

"Align to" "MiB"

"Free space preceding (MiB)" "2"

Also make sure all partitions are created with an even number of + megabytes.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/draft.png b/installer/6/en/content/draft.png new file mode 100644 index 00000000..59673fe1 Binary files /dev/null and b/installer/6/en/content/draft.png differ diff --git a/installer/6/en/content/exitInstall.html b/installer/6/en/content/exitInstall.html new file mode 100644 index 00000000..2d6c33b7 --- /dev/null +++ b/installer/6/en/content/exitInstall.html @@ -0,0 +1,52 @@ + + + + + Congratulations

Congratulations

You have finished installing and + configuring Mageia and it is now safe to remove + the installation medium and reboot your computer.

After reboot, in the bootloader + screen, you can choose between the operating systems on your computer (if + you have more than one).

If you didn't adjust the + settings for the bootloader, your Mageia install will be automatically + selected and started.

Enjoy!

Visit www.mageia.org if you have + any questions or want to contribute to Mageia

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/favicon.png b/installer/6/en/content/favicon.png new file mode 100644 index 00000000..5868d96b Binary files /dev/null and b/installer/6/en/content/favicon.png differ diff --git a/installer/6/en/content/firewall.html b/installer/6/en/content/firewall.html new file mode 100644 index 00000000..1c73f0ef --- /dev/null +++ b/installer/6/en/content/firewall.html @@ -0,0 +1,68 @@ + + + + + Firewall

Firewall

This section allows to configure + some simple firewall rules: they determine which type of message from the + Internet will be accepted by the target system. This, in turn, allows the + corresponding services on the system to be accessible from the + Internet.

In the default setting, no button is checked - no service of the + system is accessibly from the network. The "Everything (no + firewall)" button has a particular role: it enables access to all + services of the machine - an option that does not make much sense in the + context of the installer since it would create a totally unprotected system. + Its veritable use is in the context of the Mageia Control Center (which uses + the same GUI layout) for temporarily disabling the entire set of firewall + rules for testing and debugging purposes.

All other checkbuttons are more or less self-explanatory. As an + example, you will check the "CUPS server" button if you want printers on + your machine to be accessible from the network.

Advanced

The set of checkbuttons only comprises the most common services. The + "Advanced" button allows to enable messages that correspond to a service for + which no checkbutton exists. The "Advanced" button + opens a window where you can enable a series of services by typing a list of + couples (blank separated)

<port-number>/<protocol>

- <port-number> is the value of the + port assigned to the service you want to enable (e.g. 873 for the RSYNC + service) as defined in RFC-433;
- <protocol> is one of + TCP or UDP - the internet + protocol that is used by the service.

For instance, the entry for enabling access to the RSYNC service + therefore is 873/tcp.

In case a service is implemented to use both protocols, you specify 2 + couples for the same port.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/formatPartitions.html b/installer/6/en/content/formatPartitions.html new file mode 100644 index 00000000..f72206c7 --- /dev/null +++ b/installer/6/en/content/formatPartitions.html @@ -0,0 +1,56 @@ + + + + + Formatting

Formatting

Here you can choose which + partition(s) you wish to format. Any data on partitions not + marked for formatting will be saved.

Usually at least the + partitions DrakX selected, need to be formatted

Click on + Advanced to choose partitions you want to check for + so called bad blocks

Tip

If you're not sure you + have made the right choice, you can click on + Previous, again on Previous + and then on Custom to get back to the main screen. + In that screen you can choose to view what is in your partitions.

When you are confident + about the selection, click on Next to + continue.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/images/Checking.png b/installer/6/en/content/images/Checking.png new file mode 100644 index 00000000..f82cdc2d Binary files /dev/null and b/installer/6/en/content/images/Checking.png differ diff --git a/installer/6/en/content/images/Download.png b/installer/6/en/content/images/Download.png new file mode 100644 index 00000000..b07c6c78 Binary files /dev/null and b/installer/6/en/content/images/Download.png differ diff --git a/installer/6/en/content/images/Fdisk.png b/installer/6/en/content/images/Fdisk.png new file mode 100644 index 00000000..db6adc4a Binary files /dev/null and b/installer/6/en/content/images/Fdisk.png differ diff --git a/installer/6/en/content/images/Md5sum.png b/installer/6/en/content/images/Md5sum.png new file mode 100644 index 00000000..736f1227 Binary files /dev/null and b/installer/6/en/content/images/Md5sum.png differ diff --git a/installer/6/en/content/images/Root.png b/installer/6/en/content/images/Root.png new file mode 100644 index 00000000..1e786422 Binary files /dev/null and b/installer/6/en/content/images/Root.png differ diff --git a/installer/6/en/content/images/dx-help.png b/installer/6/en/content/images/dx-help.png new file mode 100644 index 00000000..32824349 Binary files /dev/null and b/installer/6/en/content/images/dx-help.png differ diff --git a/installer/6/en/content/images/dx-welcome-lang.png b/installer/6/en/content/images/dx-welcome-lang.png new file mode 100644 index 00000000..31ff500e Binary files /dev/null and b/installer/6/en/content/images/dx-welcome-lang.png differ diff --git a/installer/6/en/content/images/dx-welcome.png b/installer/6/en/content/images/dx-welcome.png new file mode 100644 index 00000000..24a9447c Binary files /dev/null and b/installer/6/en/content/images/dx-welcome.png differ diff --git a/installer/6/en/content/images/dx-welcome2.png b/installer/6/en/content/images/dx-welcome2.png new file mode 100644 index 00000000..3a1187de Binary files /dev/null and b/installer/6/en/content/images/dx-welcome2.png differ diff --git a/installer/6/en/content/images/dx-welcome4fr.png b/installer/6/en/content/images/dx-welcome4fr.png new file mode 100644 index 00000000..c7948e7a Binary files /dev/null and b/installer/6/en/content/images/dx-welcome4fr.png differ diff --git a/installer/6/en/content/images/dx-welcome5def.png b/installer/6/en/content/images/dx-welcome5def.png new file mode 100644 index 00000000..c4a00200 Binary files /dev/null and b/installer/6/en/content/images/dx-welcome5def.png differ diff --git a/installer/6/en/content/images/dx-welcome6opt.png b/installer/6/en/content/images/dx-welcome6opt.png new file mode 100644 index 00000000..23dfd94c Binary files /dev/null and b/installer/6/en/content/images/dx-welcome6opt.png differ diff --git a/installer/6/en/content/images/dx-welcomeHelp1.png b/installer/6/en/content/images/dx-welcomeHelp1.png new file mode 100644 index 00000000..544341b0 Binary files /dev/null and b/installer/6/en/content/images/dx-welcomeHelp1.png differ diff --git a/installer/6/en/content/images/dx-welcomeHelp2.png b/installer/6/en/content/images/dx-welcomeHelp2.png new file mode 100644 index 00000000..7a15ccc6 Binary files /dev/null and b/installer/6/en/content/images/dx-welcomeHelp2.png differ diff --git a/installer/6/en/content/images/dx2-add_supplemental_media.png b/installer/6/en/content/images/dx2-add_supplemental_media.png new file mode 100644 index 00000000..d6bd4fb8 Binary files /dev/null and b/installer/6/en/content/images/dx2-add_supplemental_media.png differ diff --git a/installer/6/en/content/images/dx2-chooseDesktop.png b/installer/6/en/content/images/dx2-chooseDesktop.png new file mode 100644 index 00000000..8a0371bc Binary files /dev/null and b/installer/6/en/content/images/dx2-chooseDesktop.png differ diff --git a/installer/6/en/content/images/dx2-chooseMountpoints.png b/installer/6/en/content/images/dx2-chooseMountpoints.png new file mode 100644 index 00000000..34efb4a7 Binary files /dev/null and b/installer/6/en/content/images/dx2-chooseMountpoints.png differ diff --git a/installer/6/en/content/images/dx2-choosePackageGroups.png b/installer/6/en/content/images/dx2-choosePackageGroups.png new file mode 100644 index 00000000..c7a87449 Binary files /dev/null and b/installer/6/en/content/images/dx2-choosePackageGroups.png differ diff --git a/installer/6/en/content/images/dx2-choosePackagesTree.png b/installer/6/en/content/images/dx2-choosePackagesTree.png new file mode 100644 index 00000000..de8edbdf Binary files /dev/null and b/installer/6/en/content/images/dx2-choosePackagesTree.png differ diff --git a/installer/6/en/content/images/dx2-configureServices.png b/installer/6/en/content/images/dx2-configureServices.png new file mode 100644 index 00000000..6e113ad5 Binary files /dev/null and b/installer/6/en/content/images/dx2-configureServices.png differ diff --git a/installer/6/en/content/images/dx2-configureTimezoneUTC.png b/installer/6/en/content/images/dx2-configureTimezoneUTC.png new file mode 100644 index 00000000..ec1c16d6 Binary files /dev/null and b/installer/6/en/content/images/dx2-configureTimezoneUTC.png differ diff --git a/installer/6/en/content/images/dx2-configureX_card_list.png b/installer/6/en/content/images/dx2-configureX_card_list.png new file mode 100644 index 00000000..391247c9 Binary files /dev/null and b/installer/6/en/content/images/dx2-configureX_card_list.png differ diff --git a/installer/6/en/content/images/dx2-configureX_chooser.png b/installer/6/en/content/images/dx2-configureX_chooser.png new file mode 100644 index 00000000..166d41de Binary files /dev/null and b/installer/6/en/content/images/dx2-configureX_chooser.png differ diff --git a/installer/6/en/content/images/dx2-configureX_monitor.png b/installer/6/en/content/images/dx2-configureX_monitor.png new file mode 100644 index 00000000..32aa27c7 Binary files /dev/null and b/installer/6/en/content/images/dx2-configureX_monitor.png differ diff --git a/installer/6/en/content/images/dx2-diskdrake.png b/installer/6/en/content/images/dx2-diskdrake.png new file mode 100644 index 00000000..f0863b2b Binary files /dev/null and b/installer/6/en/content/images/dx2-diskdrake.png differ diff --git a/installer/6/en/content/images/dx2-diskdrake2.png b/installer/6/en/content/images/dx2-diskdrake2.png new file mode 100644 index 00000000..131faa5e Binary files /dev/null and b/installer/6/en/content/images/dx2-diskdrake2.png differ diff --git a/installer/6/en/content/images/dx2-doPartitionDisks.png b/installer/6/en/content/images/dx2-doPartitionDisks.png new file mode 100644 index 00000000..a2fa85ca Binary files /dev/null and b/installer/6/en/content/images/dx2-doPartitionDisks.png differ diff --git a/installer/6/en/content/images/dx2-doPartitionDisks2.png b/installer/6/en/content/images/dx2-doPartitionDisks2.png new file mode 100644 index 00000000..bfdb2736 Binary files /dev/null and b/installer/6/en/content/images/dx2-doPartitionDisks2.png differ diff --git a/installer/6/en/content/images/dx2-doPartitionDisks3.png b/installer/6/en/content/images/dx2-doPartitionDisks3.png new file mode 100644 index 00000000..ba9a81ed Binary files /dev/null and b/installer/6/en/content/images/dx2-doPartitionDisks3.png differ diff --git a/installer/6/en/content/images/dx2-doPartitionDisks4.png b/installer/6/en/content/images/dx2-doPartitionDisks4.png new file mode 100644 index 00000000..6e6b9395 Binary files /dev/null and b/installer/6/en/content/images/dx2-doPartitionDisks4.png differ diff --git a/installer/6/en/content/images/dx2-exitInstall.png b/installer/6/en/content/images/dx2-exitInstall.png new file mode 100644 index 00000000..942b101c Binary files /dev/null and b/installer/6/en/content/images/dx2-exitInstall.png differ diff --git a/installer/6/en/content/images/dx2-formatPartitions.png b/installer/6/en/content/images/dx2-formatPartitions.png new file mode 100644 index 00000000..fc7ac3fe Binary files /dev/null and b/installer/6/en/content/images/dx2-formatPartitions.png differ diff --git a/installer/6/en/content/images/dx2-installUpdates.png b/installer/6/en/content/images/dx2-installUpdates.png new file mode 100644 index 00000000..63b71abe Binary files /dev/null and b/installer/6/en/content/images/dx2-installUpdates.png differ diff --git a/installer/6/en/content/images/dx2-license.png b/installer/6/en/content/images/dx2-license.png new file mode 100644 index 00000000..8a2f513e Binary files /dev/null and b/installer/6/en/content/images/dx2-license.png differ diff --git a/installer/6/en/content/images/dx2-media_selection.png b/installer/6/en/content/images/dx2-media_selection.png new file mode 100644 index 00000000..d070be8e Binary files /dev/null and b/installer/6/en/content/images/dx2-media_selection.png differ diff --git a/installer/6/en/content/images/dx2-minimal-install.png b/installer/6/en/content/images/dx2-minimal-install.png new file mode 100644 index 00000000..9c0ed28b Binary files /dev/null and b/installer/6/en/content/images/dx2-minimal-install.png differ diff --git a/installer/6/en/content/images/dx2-securityLevel.png b/installer/6/en/content/images/dx2-securityLevel.png new file mode 100644 index 00000000..e1d5ff1d Binary files /dev/null and b/installer/6/en/content/images/dx2-securityLevel.png differ diff --git a/installer/6/en/content/images/dx2-selectCountry.png b/installer/6/en/content/images/dx2-selectCountry.png new file mode 100644 index 00000000..1d555225 Binary files /dev/null and b/installer/6/en/content/images/dx2-selectCountry.png differ diff --git a/installer/6/en/content/images/dx2-selectInstallClass.png b/installer/6/en/content/images/dx2-selectInstallClass.png new file mode 100644 index 00000000..f014ba1c Binary files /dev/null and b/installer/6/en/content/images/dx2-selectInstallClass.png differ diff --git a/installer/6/en/content/images/dx2-selectKeyboard.png b/installer/6/en/content/images/dx2-selectKeyboard.png new file mode 100644 index 00000000..879681bb Binary files /dev/null and b/installer/6/en/content/images/dx2-selectKeyboard.png differ diff --git a/installer/6/en/content/images/dx2-selectLanguage.png b/installer/6/en/content/images/dx2-selectLanguage.png new file mode 100644 index 00000000..21989207 Binary files /dev/null and b/installer/6/en/content/images/dx2-selectLanguage.png differ diff --git a/installer/6/en/content/images/dx2-selectMouse.png b/installer/6/en/content/images/dx2-selectMouse.png new file mode 100644 index 00000000..437f2cf5 Binary files /dev/null and b/installer/6/en/content/images/dx2-selectMouse.png differ diff --git a/installer/6/en/content/images/dx2-setRootPassword.png b/installer/6/en/content/images/dx2-setRootPassword.png new file mode 100644 index 00000000..f13446f4 Binary files /dev/null and b/installer/6/en/content/images/dx2-setRootPassword.png differ diff --git a/installer/6/en/content/images/dx2-setupBootloader.png b/installer/6/en/content/images/dx2-setupBootloader.png new file mode 100644 index 00000000..284d7fd7 Binary files /dev/null and b/installer/6/en/content/images/dx2-setupBootloader.png differ diff --git a/installer/6/en/content/images/dx2-setupBootloader2.png b/installer/6/en/content/images/dx2-setupBootloader2.png new file mode 100644 index 00000000..f02820d0 Binary files /dev/null and b/installer/6/en/content/images/dx2-setupBootloader2.png differ diff --git a/installer/6/en/content/images/dx2-setupBootloader3.png b/installer/6/en/content/images/dx2-setupBootloader3.png new file mode 100644 index 00000000..4d869815 Binary files /dev/null and b/installer/6/en/content/images/dx2-setupBootloader3.png differ diff --git a/installer/6/en/content/images/dx2-setupBootloader4.png b/installer/6/en/content/images/dx2-setupBootloader4.png new file mode 100644 index 00000000..93f3edd1 Binary files /dev/null and b/installer/6/en/content/images/dx2-setupBootloader4.png differ diff --git a/installer/6/en/content/images/dx2-setupSCSI.png b/installer/6/en/content/images/dx2-setupSCSI.png new file mode 100644 index 00000000..7d891b77 Binary files /dev/null and b/installer/6/en/content/images/dx2-setupSCSI.png differ diff --git a/installer/6/en/content/images/dx2-soundConfig.png b/installer/6/en/content/images/dx2-soundConfig.png new file mode 100644 index 00000000..b0013e25 Binary files /dev/null and b/installer/6/en/content/images/dx2-soundConfig.png differ diff --git a/installer/6/en/content/images/dx2-summaryBottom.png b/installer/6/en/content/images/dx2-summaryBottom.png new file mode 100644 index 00000000..cc884ee2 Binary files /dev/null and b/installer/6/en/content/images/dx2-summaryBottom.png differ diff --git a/installer/6/en/content/images/dx2-summaryTop.png b/installer/6/en/content/images/dx2-summaryTop.png new file mode 100644 index 00000000..70fcc7db Binary files /dev/null and b/installer/6/en/content/images/dx2-summaryTop.png differ diff --git a/installer/6/en/content/images/dx2-takeOverHdConfirm.png b/installer/6/en/content/images/dx2-takeOverHdConfirm.png new file mode 100644 index 00000000..f0400664 Binary files /dev/null and b/installer/6/en/content/images/dx2-takeOverHdConfirm.png differ diff --git a/installer/6/en/content/images/live-setupBootloader5.png b/installer/6/en/content/images/live-setupBootloader5.png new file mode 100644 index 00000000..79bacc0e Binary files /dev/null and b/installer/6/en/content/images/live-setupBootloader5.png differ diff --git a/installer/6/en/content/index.html b/installer/6/en/content/index.html new file mode 100644 index 00000000..c72f861e --- /dev/null +++ b/installer/6/en/content/index.html @@ -0,0 +1,61 @@ + + + + + Installation with DrakX

Note

No one will see all the installer screens that you see in this + manual. Which screens you will see, depends on your hardware and the + choices you make while installing.

The texts and screenshots in this manual are + available under the CC BY-SA 3.0 license http://creativecommons.org/licenses/by-sa/3.0/.

This manual was produced with the help of the Calenco CMS developed by NeoDoc.

It was written by volunteers in their free time. Please contact + Documentation + Team, if you would like to help improve this manual.

Contents

Select and use ISOs
Introduction
Media
Downloading and Checking Media
Burn or dump the ISO
DrakX, the Mageia + Installer
Installation Welcome Screen
The installation steps
Installation Problems and Possible Solutions
Please choose a language to use
License and Release Notes
License Agreement
Release Notes
Setup SCSI
Install or Upgrade
Keyboard
Partitioning
Choose the mount points
Confirm hard disk to be + formatted
Custom disk partitioning with + DiskDrake
Formatting
Media Selection (Configure Supplemental Installation Media)
Media Selection (Nonfree)
Desktop Selection
Package Group Selection
Minimal Install
Choose Individual + Packages
User and Superuser Management
Set Administrator (root) + Password:
Enter a user
Advanced User Management
Graphic Card and Monitor + Configuration
Choose an X Server (Configure + your Graphic Card)
Choosing your Monitor
Bootloader main options
Bootloader interface
Using a Mageia bootloader
Using an existing bootloader
Using chain loading
Options
Add or Modify a Boot Menu + Entry
Summary of miscellaneous + parameters
System parameters
Hardware parameters
Network and Internet + parameters
Security
Configure your Timezone
Select your Country / Region
Input method
Configure your + Services
Select mouse
Sound Configuration
Advanced
Security Level
Firewall
Updates
Congratulations
Uninstalling Mageia
Howto
© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
   Next
loading table of contents...
diff --git a/installer/6/en/content/installUpdates.html b/installer/6/en/content/installUpdates.html new file mode 100644 index 00000000..5635a487 --- /dev/null +++ b/installer/6/en/content/installUpdates.html @@ -0,0 +1,51 @@ + + + + + Updates

Updates

Since this version of + Mageia was released, some packages will have been + updated or improved.

Choose + yes if you wish to download and install them, select + no if you don't want to do this now, or if you aren't + connected to the Internet

Then press + Next to continue

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/installer.html b/installer/6/en/content/installer.html new file mode 100644 index 00000000..6ad18b90 --- /dev/null +++ b/installer/6/en/content/installer.html @@ -0,0 +1,122 @@ + + + + + DrakX, the Mageia Installer

DrakX, the Mageia + Installer

Whether you are new to GNU-Linux or an experienced user, the Mageia + Installer is designed to help make your installation or upgrade as easy as + possible.

The initial menu screen has various options, however the default one + will start the installer, which will normally be all that you will + need.

Installation Welcome Screen

Using a Mageia DVD

Here are the default welcome screens when using a Mageia DVD, The + first one with an UEFI system and the second one with a Legacy + system:

From this screen, you can access to options by pressing the "e" + letter to enter the "edit mode". To come back to this screen, press + either the key "esc" to quit without saving or press the key "Ctrl" or + "F10" to quit with saving.

From this screen, it is possible to set some personal + preferences:

  • The language (for the installation only, may be different + that the chosen language for the system) by pressing the key F2 + (Legacy mode only)

    Use the arrow keys to select the language and press the key + Enter.

    Here is for example, the French welcome screen when using a + Live DVD/CD. Note that the Live DVD/CD menu does not propose: + Rescue System, Memory + test and Hardware Detection + Tool.

  • Change the screen resolution by pressing the F3 key (Legacy + mode only).

  • Add some kernel options by pressing the F6 key for the legacy mode or the e key for the UEFI mode.

    If the installation fails, then it may be necessary to try + again using one of the extra options. The menu called by F6 + displays a new line called Boot options and + propose four entries:

    - Default, it doesn't alter anything in the default + options.

    - Default, it doesn't alter anything in the default + options.

    - No ACPI (Advanced Configuration and Power Interface), + power management isn't taken into account.

    - No Local APIC (Local Advanced Programmable Interrupt + Controller), it is about CPU interruptions, select this option if + you are asked for.

    When you select one of these entries, it modifies the + default options displayed in the Boot Options + line.

    Note

    In some Mageia releases, it may happen that the entries + selected with the key F6 does not appear in the Boot + Options line, however, they are really taken into + account.

  • Add more kernel options by pressing the key F1 (Legacy mode + only).

    Pressing F1 opens a new window with more available options. + Select one with the arrow keys and press Enter to have more + details or press the Esc key to go back to the welcome + screen.

    The detailed view about the option splash. Press Esc or + select Return to Boot Options to go back to + the options list. These options can by added by hand in the + Boot options line.

    Note

    The help is translated in the chosen language with the F2 + key.

    For more information about kernel options on legacy and UEFI + systems, see: https://wiki.mageia.org/en/How_to_set_up_kernel_options

Using a Wired Network

Here is the default welcome screen when using a Wired + Network-based Installation CD (netinstall.iso or netinstall-nonfree.iso + images):

It does not allow to change the language, the available options + are described in the screen. For more information about using a Wired + Network-based Installation CD, see the Mageia + Wiki

Warning

The keyboard layout is the American one.

The installation steps

The install process is divided into a number of steps, which can be + followed on the side panel of the screen.

Each step has one or more screens which may also have + Advanced buttons with extra, less commonly + required, options.

Most screens have Help buttons which give + further explanations about the current step.

Note

If somewhere during install you decide to stop the installation, + it is possible to reboot, but please think twice before you do this. + Once a partition has been formatted or updates have started to be + installed, your computer is no longer in the same state and rebooting it + could very well leave you with an unusable system. If in spite of this + you are very sure rebooting is what you want, go to a text terminal by + pressing the three keys Alt Ctrl F2 at the same + time. After that, press Alt Ctrl Delete + simultaneously to reboot.

Installation Problems and Possible Solutions

No Graphical Interface

  • After the initial screen you did not reach the language + selection screen. This can happen with some graphic cards and older + systems. Try using low resolution by typing vgalo at + the prompt.

  • If the hardware is very old, a graphical installation may not + be possible. In this case it is worth trying a text mode + installation. To use this hit ESC at the first welcome screen and + confirm with ENTER. You will be presented with a black screen with + the word "boot:". Type "text" and hit ENTER. Now continue with the + installation in text mode.

The Install Freezes

If the system appeared to freeze during the installation, this may + be a problem with hardware detection. In this case the automatic + detection of hardware may be bypassed and dealt with later. To try this, + type noauto at the prompt. This option may also be combined + with other options as necessary.

RAM problem

These will rarely be needed, but in some cases the hardware may + report the available RAM incorrectly. To specify this manually, you can + use the mem=xxxM parameter, where xxx is the correct amount + of RAM. e.g. mem=256M would specify 256MB of RAM.

Dynamic partitions

If you converted your hard disk from "basic" format to "dynamic" + format on Microsoft Windows, you must know that it is impossible to + install Mageia on this disc. To go back to a basic disk, see the + Microsoft documentation: http://msdn.microsoft.com/en-us/library/cc776315.aspx.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/mageia-2013-200p.png b/installer/6/en/content/mageia-2013-200p.png new file mode 100644 index 00000000..a6846683 Binary files /dev/null and b/installer/6/en/content/mageia-2013-200p.png differ diff --git a/installer/6/en/content/main.js b/installer/6/en/content/main.js new file mode 100644 index 00000000..011818d1 --- /dev/null +++ b/installer/6/en/content/main.js @@ -0,0 +1,179 @@ +/** + * Miscellaneous js functions for WebHelp + * Kasun Gajasinghe, http://kasunbg.blogspot.com + * David Cramer, http://www.thingbag.net + * + */ + +$(document).ready(function() { + // $("#showHideHighlight").button(); //add jquery button styling to 'Go' button + //Generate tabs in nav-pane with JQuery + $(function() { + $("#tabs").tabs({ + cookie: { + // store cookie for 2 days. + expires: 2 + } + }); + }); + + //Generate the tree + $("#ulTreeDiv").css("display","block"); + $("#tree").treeview({ + collapsed: true, + animated: "medium", + control: "#sidetreecontrol", + persist: "cookie" + }); + + //after toc fully styled, display it. Until loading, a 'loading' image will be displayed + $("#tocLoading").css("display", "none"); + //$("#ulTreeDiv").attr("style","display:block;"); + + //.searchButton is the css class applied to 'Go' button + $(function() { + $("button", ".searchButton").button(); + + $("button", ".searchButton").click(function() {return false;}); + }); + + //'ui-tabs-1' is the cookie name which is used for the persistence of the tabs.(Content/Search tab) + if ($.cookie('ui-tabs-1') === '1') { //search tab is visible + if ($.cookie('textToSearch') != undefined && $.cookie('textToSearch').length > 0) { + document.getElementById('textToSearch').value = $.cookie('textToSearch'); + Verifie('diaSearch_Form'); + searchHighlight($.cookie('textToSearch')); + //$("#showHideHighlight").css("display","block"); + } + } + + syncToc(); //Synchronize the toc tree with the content pane, when loading the page. + //$("#doSearch").button(); //add jquery button styling to 'Go' button +}); + +/** + * Synchronize with the tableOfContents + */ +function syncToc(){ + var a = document.getElementById("webhelp-currentid"); + if (a != undefined) { + var b = a.getElementsByTagName("span")[0]; + + + if (b != undefined) { + //Setting the background for selected node. + //b.setAttribute("style", "color: white; background-color: #a7a9ac;"); + b.style.color = "#FFFFFF"; + b.style.backgroundColor = "#a7a9ac"; + } + + //shows the node related to current content. + //goes a recursive call from current node to ancestor nodes, displaying all of them. + while (a.parentNode && a.parentNode.nodeName) { + var parentNode = a.parentNode; + var nodeName = parentNode.nodeName; + + if (nodeName.toLowerCase() == "ul") { + parentNode.style.display = "block"; + + // Expand the current entry + var u = a.getElementsByTagName("ul")[0]; + if (u) { + u.style.display = "block"; + } + } else if (nodeName.toLocaleLowerCase() == "li") { + parentNode.setAttribute("class", "collapsable"); + parentNode.firstChild.setAttribute("class", "hitarea collapsable-hitarea "); + } + a = parentNode; + } + + if (b != undefined) { + b.scrollIntoView(); + } + } +} + +/** + * Code for Show/Hide TOC + * + */ +function showHideToc() { + var showHideButton = $("#showHideButton"); + var leftNavigation = $("#leftnavigation"); + var content = $("#content"); + + if (showHideButton != undefined && showHideButton.hasClass("pointLeft")) { + //Hide TOC + showHideButton.removeClass('pointLeft').addClass('pointRight'); + content.css("margin", "0 0 0 0"); + leftNavigation.css("display","none"); + showHideButton.attr("title", "Show table of contents"); + } else { + //Show the TOC + showHideButton.removeClass('pointRight').addClass('pointLeft'); + content.css("margin", "0 0 0 315px"); + leftNavigation.css("display","block"); + showHideButton.attr("title", "Hide table of contents"); + } +} + +/** + * Code for searh highlighting + */ +var highlightOn = true; +function searchHighlight(searchText) { + highlightOn = true; + if (searchText != undefined) { + var wList; + var sList = new Array(); //stem list + //Highlight the search terms + searchText = searchText.toLowerCase().replace(/<\//g, "_st_").replace(/\$_/g, "_di_").replace(/\.|%2C|%3B|%21|%3A|@|\/|\*/g, " ").replace(/(%20)+/g, " ").replace(/_st_/g, " + + + + Media Selection (Nonfree)

Media Selection (Nonfree)

Here you have the list of available repositories. Not all repositories + are available, according to which media you use for installing. The + repositories selection determines which packages will be available for + selection during the next steps.

  • The Core repository cannot be disabled as it + contains the base of the distribution.

  • The Nonfree repository includes packages + that are free-of-charge, i.e. Mageia may redistribute them, but they + contain closed-source software (hence the name - Nonfree). For example + this repository includes nVidia and ATI graphics card proprietary + drivers, firmware for various WiFi cards, etc.

  • The Tainted repository includes packages + released under a free license. The main criteria for placing packages in + this repository is that they may infringe patents and copyright laws + in some countries, e.g. Multimedia codecs needed to play various + audio/video files; packages needed to play commercial video DVD, + etc.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/minimal-install.html b/installer/6/en/content/minimal-install.html new file mode 100644 index 00000000..99860dd2 --- /dev/null +++ b/installer/6/en/content/minimal-install.html @@ -0,0 +1,58 @@ + + + + + Minimal Install

Minimal Install

You can choose a Minimal Installation by de-selecting everything in + the Package Group Selection screen, see + the section called “Package Group Selection”.

If desired, you can additionally tick the "Individual package + selection" option in the same screen.

Minimal Installation is intended for those with specific uses in mind + for their Mageia, such as a server or a + specialised workstation. You will probably use this option combined with the + "Individual package selection" option mentioned above, to fine-tune your + installation, see the section called “Choose Individual + Packages”.

If you choose this installation class, then the related screen will + offer you a few useful extras to install, such as documentation and X.

If selected, "With X" will also include IceWM as lightweight desktop + environment.

The basic documentation is provided in the form of man and info pages. + It contains the man pages from the Linux Documentation + Project and the GNU + coreutils info pages.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/misc-params.html b/installer/6/en/content/misc-params.html new file mode 100644 index 00000000..099152e2 --- /dev/null +++ b/installer/6/en/content/misc-params.html @@ -0,0 +1,101 @@ + + + + + Summary of miscellaneous parameters

Summary of miscellaneous + parameters

DrakX made smart choices for the + configuration of your system depending on the choices you made and on the + hardware DrakX detected. You can check the settings here and change them if + you want after pressing Configure.

Note

As a general rule, default settings are recommended and you can keep + them with 3 exceptions:

  • there are known issues with a default setting

  • the default setting has already been tried and it fails

  • something else is said in the detailed sections below

System parameters

  • Timezone

    DrakX selected a + time zone for you, depending on your preferred language. You can + change it if needed. See also the section called “Configure your Timezone”

  • Country / + Region

    If you are not in + the selected country, it is very important that you correct the + setting. See the section called “Select your Country / Region”

  • Bootloader

    DrakX has made + good choices for the bootloader setting.

    Do not change + anything, unless you know how to configure Grub2

    For more + information, see the section called “Bootloader main options”

  • User + management

    You can add extra + users here. They will each get their own /home + directories.

  • Services:

    System services + refer to those small programs which run the background (daemons). This + tool allows you to enable or disable certain tasks.

    You should check + carefully before changing anything here - a mistake may prevent your + computer from operating correctly.

    For more information, see the section called “Configure your + Services”

Hardware parameters

  • Keyboard:

    This is where + you setup or change your keyboard layout which will depend on your + location, language or type of keyboard.

    Note

    If you notice a wrong keyboard layout and want to change it, + keep in mind that your passwords are going to change too.

  • Mouse:

    Here you can add + or configure other pointing devices, tablets, trackballs etc.

  • Sound + card:

    The installer + uses the default driver, if there is a default one. The option to + select a different driver is only given when there is more than one + driver for your card, but none of them is the default one.

  • Graphical + interface:

    This section + allows you to configure your graphic card(s) and displays.

    For more + information, see the section called “Graphic Card and Monitor + Configuration”.

Network and Internet + parameters

  • Network:

    You can configure + your network here, but for network cards with non-free drivers it is + better to do that after reboot, in the Mageia Control + Center, if you have not yet enabled the Nonfree media + repositories.

    Warning

    When you add a + network card, do not forget to set your firewall to watch that + interface as well.

  • Proxies:

    A Proxy Server + acts as an intermediary between your computer and the wider internet. + This section allows you to configure your computer to utilize a proxy + service.

    You may need to + consult your systems administrator to get the parameters you need to + enter here

Security

  • Security + Level:

    Here you set the + Security level for your computer, in most cases the default setting + (Standard) is adequate for general use.

    Check the option + which best suits your usage.

  • Firewall:

    A firewall is + intended to be a barrier between your important data and the rascals + out there on the internet who would compromise or steal it.

    Select the + services that you wish to have access to your system. Your selections + will depend on what you use your computer for. For more information, + see the section called “Firewall”.

    Warning

    Bear in mind + that allowing everything (no firewall) may be very risky.

© Mageia
CC BY-SA 3.0
Uploaded on 14/07/2017
Prev   Next
 Home 
loading table of contents...
diff --git a/installer/6/en/content/nwSearchFnt.js b/installer/6/en/content/nwSearchFnt.js new file mode 100644 index 00000000..13327867 --- /dev/null +++ b/installer/6/en/content/nwSearchFnt.js @@ -0,0 +1,524 @@ +/*---------------------------------------------------------------------------- + * JavaScript for webhelp search + *---------------------------------------------------------------------------- + This file is part of the webhelpsearch plugin for DocBook WebHelp + Copyright (c) 2007-2008 NexWave Solutions All Rights Reserved. + www.nexwave.biz Nadege Quaine + http://kasunbg.blogspot.com/ Kasun Gajasinghe + */ + +//string initialization +var htmlfileList = "htmlFileList.js"; +var htmlfileinfoList = "htmlFileInfoList.js"; +var useCJKTokenizing = false; + +/* Cette fonction verifie la validite de la recherche entrre par l utilisateur */ +function Verifie(ditaSearch_Form) { + + // Check browser compatibitily + if (navigator.userAgent.indexOf("Konquerer") > -1) { + + alert(txt_browser_not_supported); + return; + } + + + var expressionInput = document.ditaSearch_Form.textToSearch.value; + //Set a cookie to store the searched keywords + $.cookie('textToSearch', expressionInput); + + + if (expressionInput.length < 1) { + + // expression is invalid + alert(txt_enter_at_least_1_char); + // reactive la fenetre de search (utile car cadres) + document.ditaSearch_Form.textToSearch.focus(); + } + else { + + // Effectuer la recherche + Effectuer_recherche(expressionInput); + + // reactive la fenetre de search (utile car cadres) + document.ditaSearch_Form.textToSearch.focus(); + } +} + +var stemQueryMap = new Array(); // A hashtable which maps stems to query words + +/* This function parses the search expression, loads the indices and displays the results*/ +function Effectuer_recherche(expressionInput) { + + /* Display a waiting message */ + //DisplayWaitingMessage(); + + /*data initialisation*/ + var searchFor = ""; // expression en lowercase et sans les caracte res speciaux + //w = new Object(); // hashtable, key=word, value = list of the index of the html files + scriptLetterTab = new Scriptfirstchar(); // Array containing the first letter of each word to look for + var wordsList = new Array(); // Array with the words to look for + var finalWordsList = new Array(); // Array with the words to look for after removing spaces + var linkTab = new Array(); + var fileAndWordList = new Array(); + var txt_wordsnotfound = ""; + + + /*nqu: expressionInput, la recherche est lower cased, plus remplacement des char speciaux*/ + searchFor = expressionInput.toLowerCase().replace(/<\//g, "_st_").replace(/\$_/g, "_di_").replace(/\.|%2C|%3B|%21|%3A|@|\/|\*/g, " ").replace(/(%20)+/g, " ").replace(/_st_/g, "= 0; i--) { + if (fileAndWordList[i] != undefined) { + linkTab.push("

" + txt_results_for + " " + "" + fileAndWordList[i][0].motslisteDisplay + "" + "

"); + + linkTab.push(""); + } + } + } + + var results = ""; + if (linkTab.length > 0) { + /*writeln ("

" + txt_results_for + " " + "" + cleanwordsList + "" + "
"+"

");*/ + results = "

"; + //write("