Hi,
1. Result of smartctl -a /dev/sda
...
SMART Error Log Version: 1
ATA Error Count: 375 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 375 occurred at disk power-on lifetime: 11302 hours (470 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 2f 11 a0 e0 Error: UNC at LBA = 0x00a0112f = 10490159
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 2f 11 a0 e0 00 00:11:44.801 READ DMA EXT
ec 00 00 00 00 00 a0 00 00:11:55.130 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 00:11:55.130 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:11:55.129 IDENTIFY DEVICE
25 00 08 2f 11 a0 e0 00 00:11:55.129 READ DMA EXT
Error 374 occurred at disk power-on lifetime: 11302 hours (470 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 2f 11 a0 e0 Error: UNC at LBA = 0x00a0112f = 10490159
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 2f 11 a0 e0 00 00:11:44.801 READ DMA EXT
ec 00 00 00 00 00 a0 00 00:11:44.800 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 00:11:41.838 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:11:41.837 IDENTIFY DEVICE
25 00 08 2f 11 a0 e0 00 00:11:41.837 READ DMA EXT
Error 373 occurred at disk power-on lifetime: 11302 hours (470 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 2f 11 a0 e0 Error: UNC at LBA = 0x00a0112f = 10490159
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 2f 11 a0 e0 00 00:11:44.801 READ DMA EXT
ec 00 00 00 00 00 a0 00 00:11:44.800 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 00:11:41.838 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:11:41.837 IDENTIFY DEVICE
25 00 08 2f 11 a0 e0 00 00:11:41.837 READ DMA EXT
Error 372 occurred at disk power-on lifetime: 11302 hours (470 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 2f 11 a0 e0 Error: UNC at LBA = 0x00a0112f = 10490159
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 2f 11 a0 e0 00 00:11:44.801 READ DMA EXT
ec 00 00 00 00 00 a0 00 00:11:44.800 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 00:11:41.838 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:11:41.837 IDENTIFY DEVICE
25 00 08 2f 11 a0 e0 00 00:11:41.837 READ DMA EXT
Error 371 occurred at disk power-on lifetime: 11302 hours (470 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 2f 11 a0 e0 Error: UNC at LBA = 0x00a0112f = 10490159
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 2f 11 a0 e0 00 00:11:37.305 READ DMA EXT
ec 00 00 00 00 00 a0 00 00:11:37.304 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 00:11:41.838 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:11:41.837 IDENTIFY DEVICE
25 00 08 2f 11 a0 e0 00 00:11:41.837 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 3735 -
# 2 Extended offline Completed without error 00% 3568 -
# 3 Extended offline Completed without error 00% 3400 -
# 4 Extended offline Completed without error 00% 3233 -
# 5 Extended offline Completed without error 00% 3066 -
# 6 Extended offline Completed without error 00% 2898 -
# 7 Extended offline Completed without error 00% 2731 -
# 8 Extended offline Completed without error 00% 2563 -
# 9 Extended offline Completed without error 00% 2396 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
2. Something related, interesting or not I don't know but to see if in the worst case ... I reuse the DVD to simulate a repair / new install and it is blocking here
'Installation du pilote pour la carte disk/card_reader/ide/scsi/hardware_raid/sata/firewire/virtual intel corporation/ch9m/m-e sata ahci controller'
Le dimanche 19 février 2012 13:22:33 Thomas Backlund, vous avez écrit :
> This is not a glibc issue.
>
> This is your harddisk failing.
> it reports media errors, that are unrecoverable.
> You better replace it as soon as possible.
>
> You can check the disk status by installing smartmontools and do a
>
> smartctl -a /dev/sda
>
> --
> Thomas