Version 6.22.1 - 4 March 2009 - explicitely close the RPM DB on comleting transaction (needed for drakx) Version 6.22 - 3 March 2009 - drop support for /etc/urpmi/media.d/*.cfg (was partially broken, non documented and hopefully unused) - add more callbacks for installer - fix reading descriptions with --env= - only load LDAP binding if needed (saves a couple MB in rpmdrake) - gurpmi: o warn when rebooting is needed after installing packages Version 6.21 - 13 January 2009 - drop urpmi.recover (no more possible with rpm 4.6 which doesn't handle --repackage) Version 6.20 - 13 January 2009 - urpmi o --auto: do not prompt for "retry" on aria2 download failure (regression introduced in 6.18) o add aria2 to the priority list of packages that need to be updated before restarting urpmi o fix issue with urpmi sometimes using the wrong key when checking signatures when the same package is available from different media o remove packages from installed-through-deps.list when they are explicitly requested using urpmi (even if they were already installed) (#45054) - urpmi_rpm-find-leaves o do not list suggested packages as unrequested packages (#46326) - urpmq o fix urpmq -i on local RPMs Version 6.19 - 24 November 2008 - urpmi o in --auto, do display an error message when rpms are missing o in --auto, do not allow to install a package substring match (you can use -a to force it) o revert --auto-update behaviour in case of media update failures (#45417) o ensure download when updating media (with --auto-update) is quiet - urpmi.update o updated "ignore"d medium should not become non "ignore"d (#45457) (regression introduced in 6.18) Version 6.18 - 28 October 2008 - urpmi, gurpmi o prompt for "retry" on aria2 download failure o retry once on aria2 versioned-file download failure o allow setting aria2-options in urpmi.cfg - urpmi o fix "urpmi firefox mozilla-firefox-ext-google-toolbar ; urpme --auto-orphans mozilla-firefox-ext-google-toolbar" which must not remove firefox (cf #45058) (this is especially bad for DrakX/rpmsrate) o fix --auto-update ignoring --media and default-media (#45097) - gurpmi o display the download errors o log all urpmi logs o fix answering yes to questions on error - urpmi.update o fix --force-key (#45094) - urpmi.addmedia o do not allow "/" in media name (#44765) - urpmi.update, urpmi.addmedia o exit on failing media instead of ignoring them (esp. for urpmi.addmedia --distrib). exceptions: "urpmi.update -a" and "urpmi.update --update" for backward compatibility Version 6.17 - 14 October 2008 - urpmi o diskspace issues are now a fatal error (need perl-URPM 3.20) (no use going on with the other transactions) - gurpmi o add support for --clean - urpmi.update, urpmi.addmedia, urpmi.removemedia: o do not check wether the media are valid, it allows "mv /etc/urpmi/urpmi.cfg.{backup,} ; urpmi.update -a" to work (nb: not equivalent with urpmi.addmedia, since pubkey will not be imported) - aria2: o do not use --max-file-not-found=3 when downloading rpms (since rpms are "versioned") o use it even if nearest mirror is rsync - library: o allow mdkapplet-upgrade-helper to force $MIRRORLIST distro version Version 6.16 - 8 October 2008 - urpmi: o fix displaying "bad signature" in non-utf8 (#44587) - gurpmi: o overall progress-bar, display the download speed, nicer looking o [bugfix for 6.15] re-allow to continue on bad signature Version 6.15 - 7 October 2008 - urpmi, rpmdrake: o nice exit code for "bad signature" fatal error. Fixes rpmdrake continuing on bad signature (#44575) - urpmi, gurpmi: o handle --replacefiles (will be used by mdkonline) (require perl-URPM 3.19) - gurpmi: o do not exit in --auto mode at end of installation which prevents restarting after priority upgrade o fix using --rpm-root & --urpmi-root o just do not ask for confirmation before removing packages in --auto mode, Version 6.14 - 23 September 2008 - use "versioned" media_info files (needed for aria2 to handle mirrors not having some media_info/*) - urpmi.addmedia, urpmi.update: o for remote media, instead of first checking reconfig.urpmi, try MD5SUM. If it fails try reconfig.urpmi o only look for "descriptions" in media_info/ o do not get "descriptions" on non update media since it's useless and potentially slow - urpmi.addmedia: o --distrib: do not skip "debug_for=" media (debug media will be added with flag "ignore" if noauto=1) o for remote media, do not probe for media_info files in "./", do it only in "media_info/" - aria2: o use --ftp-pasv (as suggested by aria2 developer) o use --connect-timeout 6 seconds (instead of 3) Version 6.13 - 18 September 2008 - aria2: o use new option --connect-timeout (need aria2 20080918 snapshot) o abort download after not finding a file on 3 servers o reduce from 16 to 8 servers for each file in metalink Version 6.12 - 17 September 2008, Pascal "Pixel" Rigaux - when using --bug, o copy /root/.rpmdrake too o copy updates descriptions too Version 6.11 - 11 September 2008, Pascal "Pixel" Rigaux - library: o create urpm::select::conflicting_packages_msg() for rpmdrake Version 6.10 - 9 September 2008, Thierry Vignaud - library: o enable rpmdrake to support --debug, --env, -q & -v options o fix urpm::download::sync() return value (used by rpmdrake) (#43639) Version 6.9 - 9 September 2008, Pascal "Pixel" Rigaux - urpmi o after installing in chroot, migrate back rpmdb db version to one compatible with the rpm in the chroot o fix orphans handling: an already installed pkg must not become "unrequested" because a new version of it is required - fix display of downloaded urls with aria2 and metalinks - fix handling --downloader when using mirrorlist (it was forcing aria2) Version 6.8 - 4 September 2008, Pascal "Pixel" Rigaux - fix proxy parameter for aria2 - remove rsync mirrors when calling aria2 - urpmi o enhance --bug: copy installed-through-deps.list in bug report - gurpmi, gurpmi2: o silence perl warnings (ie remove "use warnings") - library: o modify urpm::download::get_content() to work as non-superuser Version 6.7 - 3 September 2008, Pascal "Pixel" Rigaux - really call aria2 with --max-tries=1 (it helps a lot when trying to download some files (eg: reconfig.urpmi)) Version 6.6 - 2 September 2008, Pascal "Pixel" Rigaux - call aria2 with brand-new --uri-selector=adaptive Version 6.5 - 1 September 2008, Pascal "Pixel" Rigaux - all tools o use metalink/aria2 by default (when available) when using a mirrorlist - urpmi, urpmq o do not display all substring matches on stderr, only a subset of them, and suggest to use "-a" to use all matches (#38956) - urpmi o do not write useless "foo (obsoletes foo-xxx)" in installed-through-deps.list (#42167) - urpmi.addmedia o instead of discarding --update when using --distrib, give it a meaning: only add media flagged "update" o handle $URPMI_ADDMEDIA_REASON (special reason to give to api.mandriva.com/mirrors/... to allow statistics) - gurpmi2 o nicer default window size o render nicely under matchbox during install o handle --update Version 6.4 - 14 August 2008, Thierry Vignaud - gurpmi o fix exit code if canceling when requested to select a choice o fix exit code if refusing to insert the proper media o notify callers when installation is canceled (#40358) Version 6.3 - 14 August 2008, Thierry Vignaud - gurpmi o better handle closing dialogs o fix not asking questions on error Version 6.2 - 7 August 2008, Thierry Vignaud - gurpmi o handle --justdb and --noscripts o fix/manage --urpmi-root - urpme o add --justdb o sort the list of orphans Version 6.1 - 10 July 2008, by Pascal "Pixel" Rigaux - all tools o fix broken ssh:// (regression introduced in 6.0) - urpmi, urpme, urpmq: o fix orphans handling: suggested packages must not be detected as orphans - urpmi: o handle README.urpmi in utf8 (but not other encodings) (#41553) o handle --debug-librpm o fix --parallel on local media (ie when synthesis.cz is not copied to /var/lib/urpmi) o fix --parallel --auto-select when one box is up-to-date but not the others (#41924) o fix creation of chroot with --root by using /var/lib/rpm/installed-through-deps.list (instead of having it in /var/lib/urpmi) - urpmi.addmedia: o make --mirrorlist with no url equivalent to --mirrorlist '$MIRRORLIST' (#40283) o --interactive: fix selecting "noauto" media (#39522) - urpmq: o --suggests now displays the suggested packages, see --allow-suggests for previous behaviour (#39726) o add --obsoletes - urpme: o --test: display "Removal is possible" if no pb (#40584) Version 6.0 - 8 July 2008, by Pascal "Pixel" Rigaux - all tools: o handle "unrequested orphans" (similar to "deborphan") o statedir files are now in /var/lib/urpmi// for eg: /var/lib/urpmi/synthesis.hdlist. is now /var/lib/urpmi//synthesis.hdlist.cz it allows easier medium update without using urpmi.update (#31893) (but with --urpmi-root, old statedir files are used to allow compatibility with older urpmi) o fix handling --urpmi-root - gurpmi: o do cancel when pressing the 'No' button (#41648) - urpmi: o "missing file" and "bad rpms" errors are reported asap and are fatal errors unless the user wants to go on anyway (or --force) o display a message "Package foo is already installed" when asking "urpmi foo bar" and only installing bar (#41593) (requires perl-URPM 3.18) o set connection timeout for rsync as well (Anssi) o fix --replacepkgs when a same package appears more than once in urpmi db o fix displaying "files are missing" (regression introduced in 5.6) o tell bash-completion urpmi handles file names (#41699) (guillomovitch) - urpmi.addmedia, urpmi.update: o fix --no-md5sum (regression introduced in 5.20) (#41237) - urpme: o indent the packages to be removed o enhance error message "Removing the following package will break your system" Version 5.20 - 2 June 2008, by Pascal "Pixel" Rigaux - urpmi: o --auto-update should behave like urpmi.update when mirrorlist is outdated (cf http://forum.mandriva.com/viewtopic.php?t=86837) o fix --replacepkgs when a package appears more than once in urpmi db (#40893) (need perl-URPM 3.14) - urpmi.addmedia: o add missing mark in "Do you want to add media '%s'?" message (from Nikos) - urpmi.addmedia, urpmi.update: o fix checking synthesis MD5SUM o check downloaded synthesis/MD5SUM is not invalid HTML code, and try another mirror from mirrorlist (#39918) (useful for servers not returning a valid HTTP error) Version 5.19 - 3 April 2008, by Pascal "Pixel" Rigaux - urpmq: o --suggests is currently misleading, introduce --allow-suggests and explain the user that --suggests really means --allow-suggests (#39726) Version 5.18 - 1 April 2008, by Pascal "Pixel" Rigaux - urpmi.addmedia, urpmi.update: o correctly handle media with no xml-info when using "xml-info: always" (#39521) - urpmi.addmedia: o --mirrorlist: if the retrieved media.cfg is broken, try another mirror (#39591, it also workarounds #39592) - urpmf: o check usage of -a, -! and the like instead of displaying the ugly "Internal error: syntax error ..." o in some cases (iso on disk), the hdlist is not available in media/xxx/media_info/, but we can use the statedir copy. So use it Version 5.17 - 28 March 2008, by Pascal "Pixel" Rigaux - urpmi: o nice error message when hal daemon is not running and is needed (#39327) - urpmq: o do not use rpms on removable cdrom media (#39396) - urpmf, urpmq: o display an error message when /etc/urpmi/proxy.cfg can't be read - urpmi.update, urpmi.addmedia: o do not restrict read on /etc/urpmi/proxy.cfg if it doesn't contain passwords (#39434) Version 5.16 - 25 March 2008, by Pascal "Pixel" Rigaux - urpmi: o fix getting rpms from different media on same DVD o handle displaying utf8 download progression in non-utf8 terminal (ie clean the full line when we can't be sure of the number of characters that will be displayed) - urpmq: o fix --list -r (#39287) (regression introduced in 5.7) - bash-completion (guillomovitch): o don't complete on available packages if completed item is clearly a file o only select available packages for selected medias o fix rurpmi completion Version 5.15 - 18 March 2008, by Pascal "Pixel" Rigaux - urpmi.addmedia, urpmi.update: o urpmi.addmedia --mirrorlist handles a list of mirrors/mirrorlist: you can specify a mirror to use inside a local network, but it will default to standard mirrors when the local mirror is not available. Version 5.14 - 17 March 2008, by Pascal "Pixel" Rigaux - urpmi: o tell the user to "restart system" when it is needed o nicer error message when database is locked (#38923) Version 5.13 - 17 March 2008, by Pascal "Pixel" Rigaux - gurpmi: o handle provides (spotted by salem) o handle -p and -P like urpmi - urpmi: o never suggest --install-src for spec file (#38876) o do not allow "urpmi --install-src foo.spec" Version 5.12 - 11 March 2008, by Thierry Vignaud - gurpmi: o ensure rpm error message are always in UTF-8 o ensure urpmi messages are always in UTF-8 o handle --force o return 1 like urpmi if package doesn't exist o return urpmi error code o translate usage Version 5.11 - 11 March 2008, by Pascal "Pixel" Rigaux - gurpmi: o fix breakage introduced with priority upgrades support (#38738) (tvignaud) - bash-completion: o restore available-pkgs completion using "urpmq --list" by default (it needed COMP_URPMI_HDLISTS to be set, but it should be fast enough now) - urpmi: o have a nicer error message when perl-Hal-Cdroms is missing (#38778) o do handle suggests in priority upgrades (#38778) Version 5.9 - 7 March 2008, by Thierry Vignaud - modify infrastructure so that rpmdrake doesn't select all updates by default (#38611) Version 5.8.1 - 6 March 2008, by Thierry Vignaud - add infrastructure so that rpmdrake doesn't select all updates by default (#38611) Version 5.8 - 5 March 2008, by Thierry Vignaud - add infrastructure so that gurpmi & rpmdrake can handle priority upgrade list - add callbacks so that rpmdrake can reuse more urpmi code - gurpmi: o handle priority upgrade list - urpmi: o do not pretend removing packages from cache when there's nothing to remove Version 5.7 - 3 March 2008, by Pascal "Pixel" Rigaux - all tools: o cdrom:// replaces removable:// o use hal to wait-for/mount cdroms: you can now use more than one cdrom drive (#37363) o fix download progression using wget o restore generation of /var/lib/urpmi/names., but it is now done in urpmq/urpmi/urpmf (and so only if used as root) - gurpmi: o exit immediately on success in automatic mode o fix --auto-select option o fix --root option o give the focus to buttons (Emmanuel Blindauer, #38047) o handle --allow-medium-change (needed for drakxtools) o handle --expect-install (needed for drakxtools) o handle --test o reuse common shared code of urpmi - urpmf, urpmq: o never display raw downloader output, otherwise output is very messy (#38125) o do not try to download xml-info if it's not available (#38125) - urpmi.addmedia: o fix --distrib for cdroms (#30613) - urpmi: o fix --expect-install (broken since 4.9.30!) o fix using proxy with curl (#38143) o do not copy rpms from cdrom if only one cdrom is used (#28083) - urpmf: o fix searching for more than one pattern (#38286) - urpmq: o --list: speed it up (2.5x faster, and 6x faster with names.) Version 5.6 - 26 February 2008, by Pascal "Pixel" Rigaux - urpmq: o add --conflicts o --requires now display the raw requires, use --requires-recursive to get the old behaviour (#29176) o make "urpmq --list xxx" display "use -l to list files" and exit on error - urpmf: o fix mirrorlist handling o fix fallback on hdlist when xml-info not found - urpmi, urpmi.addmedia, urpmi.update: o have fatal errors on some errors that must not happen (eg: moving rpm from download dir to cachedir) o handle variables $ARCH/$RELEASE in mirrorlist - urpmi: o display "%s of packages will be retrieved." (need perl-URPM 3.10 and synthesis built with @filesize@) o do not say "files are missing" when the downloaded rpm is corrupted o --test: only display "Installation is possible" when it is the case (#29837) o fix "using one big transaction" that occurs when using --keep (#30198) (part of the fix is in perl-URPM 3.09) - bash-completion: o restore available-pkgs completion using "urpmq --list" (guillomovitch) (but only if COMP_URPMI_HDLISTS is set since it's slow) Version 5.5 - 23 February 2008, by Pascal "Pixel" Rigaux - all tools: o handle mirrorlist (need perl-Zone-TimeInfo patched for geolocalisation) - urpmf o fallback on hdlist when xml-info not found (useful for old distribs) - urpmi handles /etc/urpmi/media.d/*.cfg as an alternative to using urpmi.addmedia - urpmi.update, urpmi.addmedia: o handle --virtual for remote media (a better name would be "auto-update") (a la yum) o do not parse synthesis (relying on MD5SUM for corruption detection) o drop /var/lib/urpmi/names. (was used by bash-completion) - urpmi.addmedia o don't fail on remaining statedir files (#36267) (especially useful when using media.d/*.cfg) Version 5.4 - 5 February 2008, by Pascal "Pixel" Rigaux - bug fix release - urpmi, urpme, urpmq, urpmf: o fix --use-distrib Version 5.3 - 4 February 2008, by Pascal "Pixel" Rigaux - urpmi.cfg: o "media_info_dir: media_info" is the default o "no-media-info" is used for media for which media_info must be built from rpms - urpme, urpmi: o add basesystem-minimal to prohibit-remove - urpme: o enhance pkg list formatting for "The following packages contain %s: %s" error message (#29178) - urpmf: o fix --synthesis (it may break urpmq/urpmi --synthesis) - urpmq: o add --no-suggests - library: o since any_xml_info can be slow, add a "callback" option (#37264) Version 5.2 - 18 January 2008, by Pascal "Pixel" Rigaux - urpmi: o --buildrequires deprecate --src, --src is kept for compatibility but its behaviour is changed a little (it doesn't download src.rpm anymore) o --install-src as user now works for remote medium o --install-src will remove succesfully installed src.rpm from /var/cache/urpmi/rpms/* (unless post-clean is 0) - urpmf: o add special code for --files simple case, it makes urpmf 3x faster for this often used case o display a warning when searching "xxx(yyy)" since it is handled as a regexp and so the parentheses are useless. suggest using --literal - urpmq: o add --provides o fix option -a : display packages of all compatible archs (#36942) - all tools: o deprecate --curl and --wget in favor of --downloader curl and --downloader --wget o fix displaying error message when failing to lock (regression in 5.1) Version 5.1 - 16 January 2008, by Pascal "Pixel" Rigaux - urpmf, urpmq: o fix using xml info files with spaces in medium name - urpmf: o fix --license - urpmq: o add --sourcerpm o deprecate "urpmq --requires", "urpmq -R" and "urpmq -RR" o fix --list (regression introduced in 5.0) (#36742) Version 5.0 - 11 January 2008, by Pascal "Pixel" Rigaux - urpmf, urpmq: o use xml info instead of hdlist when possible o "urpmq -l" is faster (3x) o "urpmf -l" is slower (1.5x) o "urpmf --sourcerpm" is much faster o see "xml-info" option in urpmi.cfg(5) to see when those files are downloaded o new require: perl module XML::LibXML - urpmq: o use rpm file instead of hdlist/xml-info when file is local o use URPM::Package->changelogs (need perl-URPM 3.06) - urpmf o fix an *old* bug (since december 2002) making urpmf keeps parsed hdlist files in memory (was fixed for multitags, but not for simple tags) - all tools: o replace /var/lib/urpmi/MD5SUM with /var/lib/urpmi/MD5SUM. (this will allow checking xml media_info is up-to-date even if we don't update it at the same time as synthesis is updated) - urpmi.update, urpmi.addmedia, urpmi.removemedia: o drop hdlist support replaced with xml media_info (this imply file-deps are correctly handled, see genhdlist2(1)) o drop option "-c" which used to clean /var/cache/urpmi/headers o enhancement: only parse updated synthesis - urpmi.addmedia o do check md5sum of downloaded synthesis (the check was only done on urpmi.update) o new --xml-info option - urpmi: o do remove __db* on priority-upgrade (fix regression introduced in 4.10.15) o always prompt before doing a priority-upgrade transaction, even if there is only one priority upgrade package (since there will be more packages to install after restarting urpmi) Version 4.10.19 - 12 December 2007, by Pascal "Pixel" Rigaux - urpmi: o fix handling "post-clean: 0" in urpmi.cfg (#36082, regression introduced in 4.10.16) - library: o urpm::media::read_config() doesn't read urpmi.cfg global options anymore, use urpm->get_global_options or urpm->new_parse_cmdline Version 4.10.18 - 11 December 2007, by Pascal "Pixel" Rigaux - urpmi: o handle --suggests (to override urpmi.cfg global option "no-suggests") - urpmi.update: o exit code 1 when a (selected) medium can't be updated (#35952) o leave early with error if no medium were successfull updated - drop translated man pages (they are too old) - urpmi.addmedia: o exit code 1 when a medium can't be added o enhance parsing of urls with login:password for logins with "@" so that password doesn't end up in urpmi.cfg o adapt to perl-URPM 3.00 API to parse pubkey files (nb: $urpm->{keys} is not used anymore) Version 4.10.17 - 30 November 2007, by Pascal "Pixel" Rigaux - urpmi: o fix regression introduced in 4.10.15: "urpmi --force valid invalid" should warn about "invalid" but still install "valid" Version 4.10.16 - 28 November 2007, by Pascal "Pixel" Rigaux - urpmi: o small transactions should have at least 8 packages (ie --split-length is now 8 by default) o do not do a big transaction if installing less than 20 packages (ie --split-level is now 1 by default) - urpmq: o new option --requires-recursive (alias of option -d) o bugfix previous release: "urpmq --fuzzy foo" should display all "*foo*" matches Version 4.10.15 - 26 November 2007, by Pascal "Pixel" Rigaux - all tools: o exit with code 1 after displaying usage (instead of exit code 0) - urpmi: o with rsync, use --copy-links (to have the same behaviour as http/ftp, and so allow symlinks on the server) o fix "urpmi --install-src" (regression introduced in 4.10.9) (#35164) o fix --limit-rate (regression introduced in 4.9.12) o --auto-update is quite unsafe, but at least now it should be cleaner (ensure $urpm doesn't have media twice) (#36134) Version 4.10.14 - 4 October 2007, by Pascal "Pixel" Rigaux - library: o urpm::media::add_distrib_media: add option "only_updates" for rpmdrake Version 4.10.13 - 3 October 2007, by Pascal "Pixel" Rigaux - urpmi o remove prefix/var/lib/rpm/__db* after installing pkgs rooted Version 4.10.12 - 27 September 2007, by Pascal "Pixel" Rigaux - urpm::media::update_media: o ensure a second pass is done even if media has not been modified (useful for the %trigger trick done in urpmi to rebuild synthesis with suggests) - urpmf o fix -a and -o Version 4.10.11 - 24 September 2007, by Pascal "Pixel" Rigaux - create /var/tmp in chroots too - fixed nb.po Version 4.10.10 - 17 September 2007, by Pascal "Pixel" Rigaux - fix using already downloaded rpms (from /var/cache/urpmi/rpms) (#33655) - improve retrieving update descriptions API Version 4.10.9 - 13 September 2007, by Pascal "Pixel" Rigaux - urpmi, urpme o default to selecting all the prefered packages according to installed locales (need perl-URPM 2.00 to work) o do not prompt questions if not waiting for user answer (for urpmi --force or urpme --force) - urpmf o fix --synthesis Version 4.10.8 - 10 September 2007, by Pascal "Pixel" Rigaux - urpmi o enhance "columns" display of packages to install (esp. fit on 80 columns) o do not use netrc for protocol ssh Version 4.10.7 - 6 September 2007, by Pascal "Pixel" Rigaux - urpmi o fix rpmdb locking with --root o handle --searchmedia ,..., o do auto upgrade mandriva kernels (ie remove kernel*-latest to skip.list) o display size that will be installed - removed with a nice message (#32022) o display packages which are going to installed with name-version-release info in columns - urpmi, urpme o use best unit (KB, MB...) to display size will be installed - removed Version 4.10.6 - 28 August 2007, by Pascal "Pixel" Rigaux - urpmi o fix --bug when there is no /etc/urpmi/prefer.list file o new option --justdb (new perl-URPM 1.76) o do not verify signature of .spec files (#32824) o handle changes in priority-upgrade list between old and new urpmi (#32925) - urpmf o display "usage" when no is given (#32658) Version 4.10.5 - 14 August 2007, by Pascal "Pixel" Rigaux - urpmi o keep_all_tags for now to avoid rpm saying file conflicts when the content is the same o restart after upgrading 'meta-task' because of /etc/urpmi/prefer.vendor.list Version 4.10.4 - 13 August 2007, by Pascal "Pixel" Rigaux - urpmi o bugfix 4.10.0: a circular reference was causing rpmdb to be opened many times o --urpmi-root: if /etc/urpmi/*.list are available, use them. otherwise defaults to /etc/urpmi/*.list Version 4.10.3 - 13 August 2007, by Thierry Vignaud - urpmi o do not default to --nolock when using --root (reverting rafael commit on 2006-01-11 13:17) o do try to umount removable media when using --nolock (fixing rafel's commit r15048 on 2005-06-09) o try harder to explain why a package is removed o try harder to explain why we cannot select a package (eg: because i586 package is already installed on x86_64) Version 4.10.2 - 13 August 2007, by Thierry Vignaud - gurpmi: o reuse common shared code of urpmi/rpmdrake o umount removable media as soon as possible o unlock RPM & URPMI dbs locks as soon as possible like rpmdrake - urpmi o when using --urpmi-root, load /etc/rpm/macros o enable GUIes to display already installed & not installable RPMs o enable GUIes to display uninstallations - urpmi.cfg o really add global option no-suggests Version 4.10.1 - 12 August 2007, by Pascal "Pixel" Rigaux - library o urpm::select: new function get_preferred() replacing sort_choices() (for drakx) Version 4.10.0 - 11 August 2007, by Pascal "Pixel" Rigaux - new major release (motivation: urpmi has many new features) - urpmi o new option --replacepkgs (same as rpm --replacepkgs) (#16112) (need perl-URPM 1.73) o fix --quiet (regression introduced in 4.9.28) o handle preferred choices (through --prefer, /etc/urpmi/prefer.list and /etc/urpmi/prefer.vendor.list) - all tools o new option --wait-lock (#13025) Version 4.9.30 - 10 August 2007, by Pascal "Pixel" Rigaux - urpmi (thanks to Thierry Vignaud) o move some code to new module urpm::main_loop to share it with rpmdrake Version 4.9.29 - 9 August 2007, by Pascal "Pixel" Rigaux - urpmi o explicit error when using "urpmi ---install-src" as user with remote media o add support for "suggests": a newly suggested package is installed as if required, but one can remove it afterwards, or use --no-suggests (need perl-URPM 1.69) - urpmf o handle --suggests Version 4.9.28 - 3 August 2007, by Pascal "Pixel" Rigaux - urpmi o handle README..upgrade.urpmi and README.-.upgrade.urpmi: the content is displayed when upgrading from rpm older than (#30187) (need perl-URPM 1.68) - urpmf o handle --license - urpmi.update o handle -q option (#31890) - urpmq o --whatrequires: fix skipping packages through provides provided by other packages, when the other package is the same pkg name (#31773) - library o urpm::install: export %readmes so that rpmdrake can access it Version 4.9.27 - 18 June 2007, by Pascal "Pixel" Rigaux - urpmi.addmedia --distrib, urpmi/urpme/urpmf/urpmq --use-distrib o media.cfg per media field hdlist=hdlist_xxx.cz is not used anymore, xxx/media_info/hdlist.cz is used instead. To get previous behaviour, use option --use-copied-hdlist or use_copied_hdlist=1 in media.cfg - urpmi o for long package names, ensure progression of installation (####...) is still properly indented (#28639) - urpmi.addmedia o fix reconfig.urpmi use - urpmi.update o only copy previous hdlist in cache dir for rsync, don't do it for wget/curl (it's useless and potentially dangerous when used with "resume") - urpmf o bug fix -m (#31452) - all tools o 4.9.26 is broken when downloading with wget since it creates hdlist.cz.1 files. fixing using --force-clobber option (! need a patched wget !) o hide rsync errors by default to hide false positives, but allow getting them with --debug Version 4.9.26 - 14 June 2007, by Pascal "Pixel" Rigaux - urpmf o add option --use-distrib - urpmq o allow using --use-distrib as non-root - all tools o don't use time-stamping when downloading with wget (useless and slow since it forces to download the whole directory listing) (as suggested by Andrey Borzenkov on cooker) Version 4.9.25 - 8 June 2007, by Pascal "Pixel" Rigaux - all tools o --debug now implies --verbose - urpmi.addmedia o [bugfix] fix using "with synthesis.hdlist.cz" (#31081) o don't overwrite existing urpmi.cfg with an empty file when disk is full (#30945) - urpmi o prefer best architecture over exact name (eg: urpmi libfoo-devel prefers lib64foo-devel over libfoo-devel) o [bugfix] fix urpmi --parallel (#30996) o [bugfix] fix plural handling in "Packages foo can not be installed" (#31229) o fix "Argument list too long" when calling curl/wget/proz (things should work even in case of one big transaction) (#30848) - urpmf o fix an *old* bug (since december 2002) making urpmf keeps parsed hdlist files in memory Version 4.9.24 - 9 May 2007, by Pascal "Pixel" Rigaux - urpmi o display "removing package ..." when removing an obsolete or conflicting package (need perl-URPM 1.63), and not before o in verbose mode, display "removing upgraded package ..." (should make it more understandable by users) - urpmi.addmedia o [bugfix] fix removable://... (#30257) o [bugfix] look for media/$media_dir/media_info/pubkey instead of media/$media_dir/pubkey o [bugfix] with --distrib, don't use previous media's pubkey if a pubkey is missing (eg: use pubkey_main for media "Main Updates" when pubkey_main_updates is missing) Version 4.9.23 - 3 May 2007, by Pascal "Pixel" Rigaux - urpmi o always upgrade (-U) packages instead of installing (-i) them, except for inst.list packages. This change is needed to fix "b--obsoletes-->a and c--conflicts-->a prompting for upgrading a" in perl-URPM 1.61 o fix displaying README.*urpmi when using --root or --urpmi-root o fix displaying README.install.urpmi when installing a package conflicting with an available package o display "removing package ..." when removing, not before. o display "removing package ..." when upgrading package (may be too verbose though) o display "In order to satisfy the '%s' dependency, one of the following packages is needed:" so that user can understand what dependency is used (need perl-URPM 1.62) - for rpmdrake o make translate_why_removed() safe to call (cf bug #28613) Version 4.9.21 - 27 March 2007, by Pascal "Pixel" Rigaux - urpmi o add kernel-source-latest to skip.list (to be coherent with other kernel*latest) (#29933) - urpmi.addmedia o do display download progression by default (be coherent with other tools), use -q to hide it - urpmi.update o do not display download progression with -q Version 4.9.20 - 15 March 2007, by Pascal "Pixel" Rigaux - all tools o be failsafe when module encoding is not there (ie when only perl-base is installed) (#29387) - gurpmi: o fix displaying size of packages o fix displaying only the first package in "you're about to..." dialog o prevent downloading/installing dialog from resizing - urpmi-parallel-ka-run: o fix parsing the output of rshp2 (only rshp output was successfully parsed) Version 4.9.19 - 8 March 2007, by Pascal "Pixel" Rigaux - urpmi o fix priority-upgrade broken on some x86_64 (#29125) (bug introduced in urpmi 4.9.11) - gurpmi o use same translation routines as urpmi, fixing various encoding issues (#29248) - urpmq o remove duplicated warning for "urpmq -l" when a rpm header is missing (#29174) Version 4.9.17 - 6 March 2007, by Pascal "Pixel" Rigaux - urpmq o add --whatprovides (doing same as -p) (#29175) - urpmi o don't auto upgrade mandriva kernels (ie add kernel*-latest to skip.list) o add perl-MDV-Distribconf to priority upgrade packages o display translated summaries Version 4.9.16 - 2 March 2007, by Pascal "Pixel" Rigaux - urpmi o fix crash asking for medium - urpmf o do not display invalid error at the end when using removable media (#28905) - urpmq o --whatrequires-recursive: fix debug message explaining why a package is added, and enhance the verbose message explaining why some package are skipped Version 4.9.15 - 6 February 2007, by Pascal "Pixel" Rigaux - urpmi.update o add --probe-rpms to replace -f -f o -f -f should be allowed (#28500) - urpmq o --whatrequires will now handle virtual package requires (eg: bash is now returned by "urpmq --whatrequires glibc") (#28367) - german translation o don't use non iso-8859-15 chars otherwise perl segfaults (#28537) (perl bug #41442) Version 4.9.14 - 25 January 2007, by Pascal "Pixel" Rigaux - urpmi o fix encoding issue with "--bug ..." introduced in previous version (#28387) - urpmi, ... o workaround no locale (eg: LC_ALL=C): when encoding is "ascii", do not try to convert strings to this encoding, any encoding will do (#28367) - urpmq o rename option -R into --whatrequires o rename option -RR into --whatrequires-recursive, and don't go through virtual packages which are provided by another package, eg: "skipping package(s) required by db1-devel via devel(libdb), since that virtual package is provided by libdb2-devel" (#27814) o do not document option -P (which is the default) Version 4.9.13 - 19 January 2007, by Pascal "Pixel" Rigaux - urpmi, ... o fix encoding/codeset mess (using the magical Locale::gettext::bind_textdomain_codeset(..., "UTF-8") from new perl-Locale-gettext) o fix translating rpmlib messages (using URPM::bind_rpm_textdomain_codeset()) - gurpmi2 o do display installation failed on file conflicts (#22131) - urpmi.addmedia o do not display in clear text the password (when using -v or --debug) - urpmq o when using synthesis do not download packages to get information. before this modification, it was downloaded iff one medium was using hdlist (#16772) o when using synthesis fix using local rpms to get information before this modification, local rpm was used iff one medium was using hdlist o display a warning about no hdlist only for needed media, adapt the warning to the option (for "-i", synthesis can still help), and tell which rpms and impacted Version 4.9.12 - 10 January 2007, by Pascal "Pixel" Rigaux - urpmi o fix handling removable media (bug introduced in 4.9.x) (#27854) o with "-v", display the package file copied to disk o use P (ie ngettext) to handle plurals o re-allow "urpmi --clean" with no arguments (broken on january 2006, commit r36390) (#27747) o be more verbose with "-v" - urpmi, urpmq, urpmf o "--media foo" and "--searchmedia foo" use medium "foo" even if "foo" is flagged "ignore" (#27745) - urpmi.addmedia o new option "--probe-rpms" which replaces "-f -f" o fix using dir "/foo/bar boo" and no hdlist (using *.rpm) o when using "--distrib ", have "xxx" instead of "xxx1" for the medium name (eg: "Main" instead of "Main1") o when using --distrib, add noauto media with flag ignore so that someone can easily use them by removing ignore (nb: debug_for and srpm media are not added though) (cf bug #28050) Version 4.9.11 - 12 December 2006, by Pascal "Pixel" Rigaux - urpmi o when "urpmi --auto-select" needs to restart urpmi because of a priority-upgrade, ensure it doesn't prompt an unneeded choice before restarting (#27527) (nb: the problem can still occur on "urpmi rpmdrake") - urpmi.removedia o "urpmi.removedia -a" when urpmi.cfg has no entry still warn the user, but exits with status 0 Version 4.9.10 - 7 December 2006, by Pascal "Pixel" Rigaux - urpmi.addmedia o fix using "--virtual --distrib ..." Version 4.9.9 - 6 December 2006, by Pascal "Pixel" Rigaux - urpmi o fix "rpmdb: environment reference count went negative" when syslog service is down o fix having more than "hdlist" flag in urpmi.cfg - gurpmi2 (and rpmdrake) o fix crash when syslog service is down (#26256) Version 4.9.8 - 6 December 2006, by Pascal "Pixel" Rigaux - urpmi.addmedia, urpmi o use "hdlist" just like "synthesis" when forcing only hdlist usage o "hdlist" is valid with "virtual" - urpmi o don't say "Package foo-1.1 already installed" when in fact it is "Package foo-1.2 already installed". Still display "Package foo-1.1 can not be installed" until we can do better (#27176) - gurpmi (tvignaud) o don't ignore exceptions in callbacks o fix crash and really lock the urpm db Version 4.9.7 - 4 December 2006, by Pascal "Pixel" Rigaux - bug fix release - urpmi.addmedia o fix --probe-hdlist o fix "... with hdlist.cz" (only "... with synthesis.hdlist.cz" was working) - urpmi o add the long version of -q/-v (ie --quiet/--verbose) o --quiet is really quiet (#14538) Version 4.9.6 - 31 November 2006, by Pascal "Pixel" Rigaux - bug fix release - urpmf: o handle --urpmi-root - urpmi.addmedia: o fix downloading synthesis which is done twice when remote o fix downloading pubkey in media_info/ Version 4.9.5 - 30 November 2006, by Pascal "Pixel" Rigaux - all tools: o new option --urpmi-root that is similar to --root but also use rooted urpmi db - urpmi: o handle buggy "list: xxx" in urpmi.cfg (when the list can't be found) o handle no "synthesis" together with "with_hdlist: synthesis.hdlist.cz" - urpmi.cfg: o new per-medium field "media_info_dir:" which replaces "with_hdlist:" in most cases. It allows using either hdlist & synthesis when nor "hdlist:" nor "synthesis" is set (#16232) - urpmi.update: o not so verbose by default, only display 'medium "foo" is up-to-date' or 'medium "foo" updated' - urpmi.removemedia: o not so verbose by default, only display 'removing medium "foo"' o do not allow both "-a" and , fix usage - urpmi.addmedia: o not so verbose by default, only display 'adding medium "foo"' o do not add "hdlist: hdlist..cz" lines in urpmi.cfg, compute it from (one can still enforce a file name) o do not default to --probe-synthesis but use both hdlist/synthesis Version 4.9.4 - 24 November 2006, by Pascal "Pixel" Rigaux - urpmi.addmedia: o fix random ordering of media (using --distrib on a non-remote medium) o now inserting non-remote medium after first non-remote medium (instead of adding it as first medium) - urpmi, urpme, urpmq: o add option --probe-synthesis (allowed with --use-distrib) Version 4.9.3 - 24 November 2006, by Pascal "Pixel" Rigaux - bug fix release: - fix handling multiple virtual hdlist files (the second pass was not done...) Version 4.9.2 - 24 November 2006, by Pascal "Pixel" Rigaux - bug fix release: - /foo/@86875:bar.src.rpm is not a url with protocol /foo/@86875 - /foo/chroot_tmp/... is not a url with protocol /foo/chroot Version 4.9.1 - 23 November 2006, by Pascal "Pixel" Rigaux - cleanup locks handling, log locking, and don't say "urpmi database locked" when it's the rpm database that is locked - urpmi: o add --nokeep (which overrides urpmi.cfg global option "keep") Version 4.9.0 - 22 November 2006, by Pascal "Pixel" Rigaux - urpmi: o don't fork on multiple transactions o fix buggy print "::logger_id::" (#27026) - gurpmi2 (tvignaud): o fix unvisible content o prevent a dialog to have a height of several scores of thousands pixels o add support of --root - urpmi.update: o don't write urpmi.cfg unless really needed o don't write md5sum in urpmi.cfg (bugfix) - urpmi.addmedia: o drop support for "list" file (now you must have a hdlist/synthesis on remote server) o drop support for searching recursively rpms when there is no hdlist/synthesis. Only search in given directory (ie $url/*.rpm) o do not use list. to store passwords, use /etc/urpmi/netrc instead. Also do have the url in urpmi.cfg, only the password is removed o change the format of list., it contains only rpm files relative to the medium url o deprecate "... with ". It is not useful anymore (nb: if you want to force using hdlist or synthesis, use --probe-hdlist or --probe-synthesis) o don't write urpmi.cfg twice o do not look for hdlist/synthesis in ../media_info/hdlist$suffix.cz (nb: with media.cfg, it will still use hdlist from media/media_info/, but it will simply use the hdlist$suffix.cz given by media.cfg ) o --norebuild is by default (and deprecated): when the local hdlist/synthesis is buggy, do not discard it and go searching for *.rpm. Make it an error instead o fix building synthesis when using *.rpm (ie no hdlist/synthesis) - urpmi.removemedia: much faster (since it doesn't parse hdlist/synthesis anymore) - handle "empty" hdlist/synthesis - generate names. only when the medium is created/updated - major splitting of urpm.pm in many modules - major splitting of functions in smaller functions (eg: update_media was 988 lines long, has been splitted in functions shorter than 105 lines) - big code cleanup/rework - perl_checker compliance (very useful for such big code rework)