diff options
Diffstat (limited to 'pod')
| -rw-r--r-- | pod/8/urpmf.pod | 136 | ||||
| -rw-r--r-- | pod/8/urpmi.addmedia.pod | 149 | ||||
| -rw-r--r-- | pod/8/urpmi.pod | 362 | ||||
| -rw-r--r-- | pod/8/urpmi.update.pod | 72 | ||||
| -rw-r--r-- | pod/8/urpmq.pod | 277 |
5 files changed, 585 insertions, 411 deletions
diff --git a/pod/8/urpmf.pod b/pod/8/urpmf.pod index bff688d0..d63c7993 100644 --- a/pod/8/urpmf.pod +++ b/pod/8/urpmf.pod @@ -32,69 +32,57 @@ Prints a help message and exits. Prints the version number and exits. -=item B<--env> I<directory> +=item B<--verbose> -Use a different environment directly out of a bug report tarball. +Verbose mode. urpmf will emit various messages related to the parsing of +media_info files for your media. -=item B<--excludemedia> I<medium1,...,mediumN> +=item B<--wait-lock> -Do not use the given media. +If the urpmi or rpm db is busy, wait until it is available + +=back + +=head2 Query Options + +=over =item B<-l>, B<--literal> Match literally instead of interpreting the argument as a regular expression. -=item B<--media> I<medium1,...,mediumN> +=item B<-i> -Select specific media to be used, instead of defaulting to all available -media (or all update media if B<--update> is used). +Ignore case distinctions in the patterns that follow. -=item B<--sortmedia> I<medium1,...,mediumN> +=item B<-I> -Sort the given media, substrings may be used to simplify grouping. -This way, C<media1> will be taken into account first, then C<media2>, and -so on. Media which aren't listed are taken into account after the others. +Honor case distinctions in the patterns that follow. This is the default +behaviour. -=item B<--synthesis> I<file> -Use the given synthesis file instead of urpmi db for searching packages. +=back -=item B<--use-distrib> I<directory> +=head2 Output Options -Use the given distribution tree instead of urpmi db for searching packages. +=over =item B<--uniq> Do not print identical lines twice. -=item B<--update> - -Use only update media. This means urpmf will only search through media -marked as update. - -=item B<--urpmi-root> I<directory> - -Use the file system tree rooted for urpmi database and rpm install. Contrary -to B<--root>, the urpmi configuration comes from the rooted tree. - -=item B<--verbose> - -Verbose mode. urpmf will emit various messages related to the parsing of -media_info files for your media. - -=item B<--wait-lock> -If the urpmi or rpm db is busy, wait until it is available +=item B<-m> -=item B<-i> +Print the name of the media in which the +package has been found. -Ignore case distinctions in the patterns that follow. +=item B<-f> -=item B<-I> +Print version, release and arch along with name +of package. This modifies the effect of the I<--name> option. -Honor case distinctions in the patterns that follow. This is the default -behaviour. =item B<-F> I<string> @@ -115,8 +103,7 @@ Prints the BuildHost tag. =item B<--buildtime> -Prints the -BuildTime tag. +Prints the BuildTime tag. =item B<--conffiles> @@ -200,15 +187,11 @@ Prints the packages' URL. Prints the Vendor tag. -=item B<-m> - -Print the name of the media in which the -package has been found. +=back -=item B<-f> +=head2 Advanced Query Options -Print version, release and arch along with name -of package. This modifies the effect of the I<--name> option. +=over =item B<-e> @@ -240,6 +223,67 @@ Right parenthesis to close a group expression. Includes debugging output. + +=back + +=head2 Media Selection + +=over + +=item B<--excludemedia> I<medium1,...,mediumN> + +Do not use the given media. + +=item B<--media> I<medium1,...,mediumN> + +Select specific media to be used, instead of defaulting to all available +media (or all update media if B<--update> is used). + +=item B<--sortmedia> I<medium1,...,mediumN> + +Sort the given media, substrings may be used to simplify grouping. +This way, C<media1> will be taken into account first, then C<media2>, and +so on. Media which aren't listed are taken into account after the others. + +=item B<--synthesis> I<file> + +Use the given synthesis file instead of urpmi db for searching packages. + +=item B<--use-distrib> I<directory> + +Use the given distribution tree instead of urpmi db for searching packages. + +=item B<--update> + +Use only update media. This means urpmf will only search through media +marked as update. + +=back + +=head2 Database Options + +=over + +=item B<--urpmi-root> I<directory> + +Use the file system tree rooted for urpmi database and rpm install. Contrary +to B<--root>, the urpmi configuration comes from the rooted tree. + +=item B<--wait-lock> + +If the urpmi or rpm db is busy, wait until it is available + +=back + +=head2 Debugging Options + +=over + +=item B<--env> I<directory> + +Use a different environment directly out of a bug report tarball. + + =back =head1 FORMAT diff --git a/pod/8/urpmi.addmedia.pod b/pod/8/urpmi.addmedia.pod index 4ccaf64f..0cc6fceb 100644 --- a/pod/8/urpmi.addmedia.pod +++ b/pod/8/urpmi.addmedia.pod @@ -82,44 +82,57 @@ machine (e.g. C<media/main>). =head1 OPTIONS +=head2 Media Search and Selection + =over -=item B<--wget> +=item B<--mirrorlist> -Use wget only for downloading distant files. By default curl is used if +Use the given url as a mirror list. It is quite special, please see examples +at the beginning of this page. + +You can also give a space seperated list of urls. Each url can be either a +mirrorlist or a mirror url. This is useful if you have a mirror to use inside +a local network, but still use standard mirrors when the local mirror is not available. -=item B<--curl> -Use curl only for downloading distant files. This is the default if curl -is available. +nb: $MIRRORLIST is a special variable which gives the default URL for the +current distribution/arch. $MIRRORLIST is the default mirrorlist. -=item B<--curl-options> I<'options'> +=item B<--zeroconf> -=item B<--rsync-options> I<'options'> +Find a media repository for the current distribution using zeroconf (DNS-SD). +It can be used together with B<--distrib> or by specifying a media name and a +path to the media directory, relative to the repository root. -=item B<--wget-options> I<'options'> +=item B<--distrib> -Specify additional command-line options to be passed to curl, rsync or -wget when retrieving files. If several options are to be passed, separate -them with spaces and enclose them in quotes. +Retrieve a set of media from a distribution. Typically, the URL provided +to C<urpmi.addmedia> will represent the parent directory of a directory +B<media>, which in turn will contain various subdirectories for each +medium of the distribution. <I<name>> is combined with medium names found +to create newer medium names in the urpmi database. -Note that the rsync options will also be used for ssh media. +=item B<--interactive> -=item B<--limit-rate I<rate>> +This option is to be used with B<--distrib>. With it, C<urpmi.addmedia> +will ask for confirmation for each media it finds for the specified +distribution. -Try to limit the download speed, I<rate> is given in bytes/sec. This option -is not active by default. +=item B<--all-media> -=item B<--proxy> I<proxyhost[:port|1080]> +This option is to be used with B<--distrib>. With it, C<urpmi.addmedia> +will attempt to add all media it finds. By default, it won't add media +containing source rpms, or media corresponding to supplementary CD-ROMs +on distributions. -Use specified HTTP proxy. -=item B<--proxy-user> I<user:password> +=back -Use specified user and password to use for proxy authentication. -Specifying B<--proxy-user=ask> will cause C<urpmi.addmedia> to prompt for a -username and a password. +=head2 Media Handling + +=over =item B<--update> @@ -149,70 +162,82 @@ Use synthesis file. Use rpm files (instead of synthesis). -=item B<--mirrorlist> -Use the given url as a mirror list. It is quite special, please see examples -at the beginning of this page. +=item B<--virtual> -You can also give a space seperated list of urls. Each url can be either a -mirrorlist or a mirror url. This is useful if you have a mirror to use inside -a local network, but still use standard mirrors when the local mirror is not +Creates a virtual medium: the medium is always up-to-date and so it does not +need to be updated by C<urpmi.update>. + +=item B<--raw> + +Add the new media in the urpmi configuration file, but don't update it nor +proceed to any download. The media, to be usable, will need to be updated +with C<urpmi.update>; it's ignored until then. + +=item B<--nopubkey> + +Don't import pubkey of added media. + + +=back + +=head2 Download Options + +=over + +=item B<--wget> + +Use wget only for downloading distant files. By default curl is used if available. +=item B<--curl> -nb: $MIRRORLIST is a special variable which gives the default URL for the -current distribution/arch. $MIRRORLIST is the default mirrorlist. +Use curl only for downloading distant files. This is the default if curl +is available. -=item B<--zeroconf> +=item B<--curl-options> I<'options'> -Find a media repository for the current distribution using zeroconf (DNS-SD). -It can be used together with B<--distrib> or by specifying a media name and a -path to the media directory, relative to the repository root. +=item B<--rsync-options> I<'options'> -=item B<--distrib> +=item B<--wget-options> I<'options'> -Retrieve a set of media from a distribution. Typically, the URL provided -to C<urpmi.addmedia> will represent the parent directory of a directory -B<media>, which in turn will contain various subdirectories for each -medium of the distribution. <I<name>> is combined with medium names found -to create newer medium names in the urpmi database. +Specify additional command-line options to be passed to curl, rsync or +wget when retrieving files. If several options are to be passed, separate +them with spaces and enclose them in quotes. -=item B<--interactive> +Note that the rsync options will also be used for ssh media. -This option is to be used with B<--distrib>. With it, C<urpmi.addmedia> -will ask for confirmation for each media it finds for the specified -distribution. +=item B<--limit-rate I<rate>> -=item B<--all-media> +Try to limit the download speed, I<rate> is given in bytes/sec. This option +is not active by default. -This option is to be used with B<--distrib>. With it, C<urpmi.addmedia> -will attempt to add all media it finds. By default, it won't add media -containing source rpms, or media corresponding to supplementary CD-ROMs -on distributions. +=item B<--proxy> I<proxyhost[:port|1080]> -=item B<--urpmi-root> I<directory> +Use specified HTTP proxy. -Use the file system tree rooted for urpmi database and rpm install. Contrary -to B<--root>, the urpmi configuration comes from the rooted tree. +=item B<--proxy-user> I<user:password> -=item B<--wait-lock> +Use specified user and password to use for proxy authentication. +Specifying B<--proxy-user=ask> will cause C<urpmi.addmedia> to prompt for a +username and a password. -If the urpmi or rpm db is busy, wait until it is available -=item B<--virtual> +=back -Creates a virtual medium: the medium is always up-to-date and so it does not -need to be updated by C<urpmi.update>. +=head2 Database Options -=item B<--raw> +=over -Add the new media in the urpmi configuration file, but don't update it nor -proceed to any download. The media, to be usable, will need to be updated -with C<urpmi.update>; it's ignored until then. +=item B<--urpmi-root> I<directory> -=item B<--nopubkey> +Use the file system tree rooted for urpmi database and rpm install. Contrary +to B<--root>, the urpmi configuration comes from the rooted tree. + +=item B<--wait-lock> + +If the urpmi or rpm db is busy, wait until it is available -Don't import pubkey of added media. =back diff --git a/pod/8/urpmi.pod b/pod/8/urpmi.pod index 205d7188..3fc9a7ad 100644 --- a/pod/8/urpmi.pod +++ b/pod/8/urpmi.pod @@ -59,6 +59,23 @@ example when the ftp archive changes) use C<urpmi.update>. Prints a help message and exit. +=item B<--force> + +Assume yes on all questions. + +=item B<-q>, B<--quiet> + +Quiet mode: when calling rpm no upgrade status is printed. + +=item B<-v>, B<--verbose> + +Proposes a verbose mode with various messages. + +=back + +=head2 Media Selection + +=over =item B<--media> I<media1,...,mediaN> @@ -93,9 +110,19 @@ Use the specified synthesis file instead of the urpmi database for searching packages and resolving dependencies. This option is mostly designed for internal use. -=item B<--auto> +=item B<--use-distrib> I<directory> -Install all required dependencies without asking. +Configure urpmi on the fly from a distrib tree, useful to install a chroot +with the B<--root> option. See the description of the B<--distrib> option +in the C<urpmi.addmedia> manpage. + + + +=back + +=head2 Operation Modes + +=over =item B<--auto-select> @@ -112,6 +139,90 @@ C<urpmi.update>. Remove all orphans without asking (see also C<urpme --auto-orphans>) + +=back + +=head2 Package Selection + +=over + +=item B<--auto> + +Install all required dependencies without asking. + + +=item B<-y>, B<--fuzzy> + +Disable fast search on exact package name; that means that urpmi will +propose all packages matching part of the name, even if one of them +matches exactly the specified name. + +=item B<--buildrequires> + +Select all the C<BuildRequires> of the wanted source packages. +(You can also install the build dependencies read directly from an rpm spec file.) + +=item B<--install-src> + +Install only the source package (that is, no binary packages will be +installed). You don't need to be root to use this option (if you have +write access to your rpm build top directory). + + +=item B<--no-recommends> + +With this option, urpmi will not install "suggested" packages. +By default, urpmi will install (newly) suggested packages. + +=item B<--allow-suggests> + +With this option, urpmi will install "suggested" packages. +This is useful if you have C<no-recommends> in urpmi.cfg. + + +=item B<--strict-arch> + +Upgrade only packages if the newer version has the same architecture as +the one installed. Mostly useful on machines that support several +architectures (32 and 64 bit). + +=item B<-a> + +If multiple packages match the given substring, install them all. + +=item B<-p> + +Allow search in provides to find the package (this is the default). + +=item B<-P> + +Do not search in provides to find package (this is the opposite of B<-p>). + + +=item B<--skip> I<pattern,...> + +You can specify a list of packages which installation should be skipped. +You can also include patterns between //, just like in +F</etc/urpmi/skip.list> (see urpmi.files(5)). + +=item B<--prefer> I<pattern,...> + +You can specify a list of packages which installation should be preferred +(especially useful with B<--auto>). +You can also include patterns between //, just like in +F</etc/urpmi/prefer.list> (see urpmi.files(5)). + +=item B<--more-choices> + +When several packages are found, propose more choices than the default. + + +=back + +=head2 Package Processing + +=over + =item B<--no-md5sum> Disable MD5SUM file checking when updating media. @@ -149,23 +260,6 @@ Split urpmi's operation in small transactions of at least I<count> packages. The default is 8 and setting this value to 0 just disables splitting in small transactions. -=item B<-y>, B<--fuzzy> - -Disable fast search on exact package name; that means that urpmi will -propose all packages matching part of the name, even if one of them -matches exactly the specified name (this is the same as B<-y>). - -=item B<--buildrequires> - -Select all the C<BuildRequires> of the wanted source packages. -(You can also install the build dependencies read directly from an rpm spec file.) - -=item B<--install-src> - -Install only the source package (that is, no binary packages will be -installed). You don't need to be root to use this option (if you have -write access to your rpm build top directory). - =item B<--clean> Remove all packages from the cache in directory F</var/cache/urpmi/rpms>. @@ -175,40 +269,6 @@ Remove all packages from the cache in directory F</var/cache/urpmi/rpms>. Do not remove any package from the cache in directory F</var/cache/urpmi/rpms>. -=item B<--force> - -Assume yes on all questions. - -=item B<-q>, B<--quiet> - -Quiet mode: when calling rpm no upgrade status is printed. - -=item B<-v>, B<--verbose> - -Proposes a verbose mode with various messages. - -=item B<--debug> - -Proposes a very verbose mode. - -=item B<--debug-librpm> - -Proposes a very verbose mode (similar to rpm -vv) - -=item B<--deploops> - -Print warnings when packages cannot be ordered properly due to dependancy loops. - -=item B<--no-recommends> - -With this option, urpmi will not install "suggested" packages. -By default, urpmi will install (newly) suggested packages. - -=item B<--allow-suggests> - -With this option, urpmi will install "suggested" packages. -This is useful if you have C<no-recommends> in urpmi.cfg. - =item B<--justdb> Update only the database, not the filesystem. @@ -238,33 +298,6 @@ this case. When used when B<--auto>, do not suppress all questions, but still ask the user for medium changes (e.g. insertion of CD-ROMs). -=item B<--parallel> I<alias> - -Activate distributed execution of urpmi to other machines (it is mandatory -that urpmi is installed, but it is not necessary to have media defined on -any machines). I<alias> defines which extension module is to be used by -urpmi (currently, C<urpmi-parallel-ka-run> or C<urpmi-parallel-ssh> are -available) and which machines should be updated. This alias is defined in -the file F</etc/urpmi/parallel.cfg> as described in the L<urpmi.files> -manpage. - -=item B<--root> I<directory> - -Use the file system tree rooted for rpm install. All operations and -scripts will run after chroot(2). The rpm database that lies in the rooted -tree will be used, but the urpmi configuration comes from the normal -system. - -=item B<--urpmi-root> I<directory> - -Use the file system tree rooted for urpmi database and rpm install. Contrary -to B<--root>, the urpmi configuration comes from the rooted tree. - -=item B<--use-distrib> I<directory> - -Configure urpmi on the fly from a distrib tree, useful to install a chroot -with the B<--root> option. See the description of the B<--distrib> option -in the C<urpmi.addmedia> manpage. =item B<--download-all> I<dest-dir> @@ -274,58 +307,6 @@ option is set, urpmi will first download all the needed packages and proceed to install them if it managed to download them all. You can optionally specify a directory where the files should be downloaded (default is /var/cache/urpmi which could be too small to hold all the files). -=item B<--downloader> I<program name> - -Use a specific program for downloading distant files via http or ftp. -By default curl is used if available, or wget instead. - -=item B<--curl-options> I<'options'> - -=item B<--rsync-options> I<'options'> - -=item B<--wget-options> I<'options'> - -Specify additional command-line options to be passed to curl, rsync or -wget when retrieving files. If several options are to be passed, separate -them with spaces and enclose them in quotes. - -Note that the rsync options will also be used for ssh media (since it's -actually rsync over ssh). - -=item B<--limit-rate> I<rate> - -Try to limit the download speed. I<rate> is given in bytes/sec. This -option is not active by default. - -=item B<--resume> - -Resume transfer of partially-downloaded files. - -=item B<--retry> I<times> - -Retries to download files over FTP or HTTP the specified number -of times. - -=item B<--proxy> I<proxyhost[:port]> - -Use specified HTTP proxy. - -=item B<--proxy-user> I<user:password> - -Use specified user and password to use for proxy authentication. -Specifying B<--proxy-user=ask> will cause urpmi to prompt for a username -and a password. - -=item B<--bug> I<directory> - -Create a bug report in I<directory>. You have to send a compressed archive -of the directory to the urpmi maintainer for the bug being (probably) -reproduced. See L</"BUG REPORTS"> below. - -=item B<--env> I<directory> - -Use a different environment directly from a bug report to replay a bug. -The argument is the same argument given to B<--bug> option. =item B<--verify-rpm> @@ -368,22 +349,26 @@ This is equivalent to C<rpm --noscripts>. Ignore file conflicts. This is equivalent to C<rpm --replacefiles>. -=item B<--skip> I<pattern,...> -You can specify a list of packages which installation should be skipped. -You can also include patterns between //, just like in -F</etc/urpmi/skip.list> (see urpmi.files(5)). -=item B<--prefer> I<pattern,...> -You can specify a list of packages which installation should be preferred -(especially useful with B<--auto>). -You can also include patterns between //, just like in -F</etc/urpmi/prefer.list> (see urpmi.files(5)). +=back -=item B<--more-choices> +=head2 Database Options -When several packages are found, propose more choices than the default. +=over + +=item B<--root> I<directory> + +Use the file system tree rooted for rpm install. All operations and +scripts will run after chroot(2). The rpm database that lies in the rooted +tree will be used, but the urpmi configuration comes from the normal +system. + +=item B<--urpmi-root> I<directory> + +Use the file system tree rooted for urpmi database and rpm install. Contrary +to B<--root>, the urpmi configuration comes from the rooted tree. =item B<--nolock> @@ -394,23 +379,94 @@ B<--root>. If the urpmi or rpm db is busy, wait until it is available -=item B<--strict-arch> -Upgrade only packages if the newer version has the same architecture as -the one installed. Mostly useful on machines that support several -architectures (32 and 64 bit). +=back -=item B<-a> +=head2 Download Options -If multiple packages match the given substring, install them all. +=over -=item B<-p> +=item B<--parallel> I<alias> -Allow search in provides to find the package (this is the default). +Activate distributed execution of urpmi to other machines (it is mandatory +that urpmi is installed, but it is not necessary to have media defined on +any machines). I<alias> defines which extension module is to be used by +urpmi (currently, C<urpmi-parallel-ka-run> or C<urpmi-parallel-ssh> are +available) and which machines should be updated. This alias is defined in +the file F</etc/urpmi/parallel.cfg> as described in the L<urpmi.files> +manpage. -=item B<-P> +=item B<--downloader> I<program name> + +Use a specific program for downloading distant files via http or ftp. +By default curl is used if available, or wget instead. + +=item B<--curl-options> I<'options'> + +=item B<--rsync-options> I<'options'> + +=item B<--wget-options> I<'options'> + +Specify additional command-line options to be passed to curl, rsync or +wget when retrieving files. If several options are to be passed, separate +them with spaces and enclose them in quotes. + +Note that the rsync options will also be used for ssh media (since it's +actually rsync over ssh). + +=item B<--limit-rate> I<rate> + +Try to limit the download speed. I<rate> is given in bytes/sec. This +option is not active by default. + +=item B<--resume> + +Resume transfer of partially-downloaded files. + +=item B<--retry> I<times> + +Retries to download files over FTP or HTTP the specified number +of times. + +=item B<--proxy> I<proxyhost[:port]> + +Use specified HTTP proxy. + +=item B<--proxy-user> I<user:password> + +Use specified user and password to use for proxy authentication. +Specifying B<--proxy-user=ask> will cause urpmi to prompt for a username +and a password. + +=back + +=head2 Debugging Options + +=over + +=item B<--debug> + +Proposes a very verbose mode. + +=item B<--debug-librpm> + +Proposes a very verbose mode (similar to rpm -vv) + +=item B<--deploops> + +Print warnings when packages cannot be ordered properly due to dependancy loops. + +=item B<--bug> I<directory> + +Create a bug report in I<directory>. You have to send a compressed archive +of the directory to the urpmi maintainer for the bug being (probably) +reproduced. See L</"BUG REPORTS"> below. + +=item B<--env> I<directory> + +Use a different environment directly from a bug report to replay a bug. +The argument is the same argument given to B<--bug> option. -Do not search in provides to find package (this is the opposite of B<-p>). =back diff --git a/pod/8/urpmi.update.pod b/pod/8/urpmi.update.pod index 134ef97a..cd059646 100644 --- a/pod/8/urpmi.update.pod +++ b/pod/8/urpmi.update.pod @@ -24,25 +24,10 @@ Force update of GPG key. Don't update media, but mark them as ignored (that is, disables them). B<--no-ignore> has the reverse behaviour: it marks the media as enabled. -=item B<--limit-rate I<rate>> - -Try to limit the download speed, I<rate> is given in bytes/sec. This -option is not active by default. - =item B<--no-md5sum> Disable MD5SUM file checking. -=item B<--proxy> I<proxyhost[:port|1080]> - -Use specified HTTP proxy. - -=item B<--proxy-user> I<user:password> - -Use specified user and password to use for proxy authentication. -Specifying B<--proxy-user=ask> will cause urpmi.update to prompt for a -username and a password. - =item B<--urpmi-root> I<directory> Use the file system tree rooted for urpmi database and rpm install. Contrary @@ -56,6 +41,37 @@ If the urpmi or rpm db is busy, wait until it is available Use only update media. +=item B<-a> + +Select all enabled non-static media to update them. + +=item B<-f> + +Force updating synthesis + +=item B<-ff> + +Really force updating synthesis + +=item B<--probe-rpms> + +Do not use synthesis, use rpm files directly + +=item B<-q> + +Quiet mode. + +=item B<-v> + +Verbose mode. + + +=back + +=head2 Download Options + +=over + =item B<--curl> Use curl for downloading distant @@ -78,29 +94,21 @@ them with spaces and enclose them in quotes. Note that the rsync options will also be used for ssh media. -=item B<-a> - -Select all enabled non-static media to update them. - -=item B<-f> - -Force updating synthesis - -=item B<-ff> - -Really force updating synthesis +=item B<--proxy> I<proxyhost[:port|1080]> -=item B<--probe-rpms> +Use specified HTTP proxy. -Do not use synthesis, use rpm files directly +=item B<--proxy-user> I<user:password> -=item B<-q> +Use specified user and password to use for proxy authentication. +Specifying B<--proxy-user=ask> will cause urpmi.update to prompt for a +username and a password. -Quiet mode. +=item B<--limit-rate I<rate>> -=item B<-v> +Try to limit the download speed, I<rate> is given in bytes/sec. This +option is not active by default. -Verbose mode. =back diff --git a/pod/8/urpmq.pod b/pod/8/urpmq.pod index 577505a1..33fed7db 100644 --- a/pod/8/urpmq.pod +++ b/pod/8/urpmq.pod @@ -24,6 +24,21 @@ according to the command-line options that were used: Prints a help message and exit. +=item B<-v>, B<--verbose> + +Activate verbose mode. + + +=item B<--force> + +Continue when requesting packages that are not available. + +=back + +=head2 Operation Modes + +=over + =item B<--list> List available packages. @@ -46,38 +61,13 @@ List available nodes for parallel installation (when using B<--parallel>). List available parallel aliases. -=item B<--update> - -Use only update media. This means that urpmq will search and resolve -dependencies only in media marked as containing updates (e.g. which have -been created with C<urpmi.addmedia --update>). - -=item B<--media> I<media1,...,mediaN> - -Select specific media to be used, instead of defaulting -to all available media (or all update media if B<--update> is used). -No rpm will be found in other media. - -=item B<--excludemedia> I<media1,...,mediaN> - -Do not use the specified media. - -=item B<--searchmedia> I<media> - -Use only the specified media to search for packages that are specified on -the command-line, or which are found when using B<--auto-select>. -Dependencies of those packages can still be found in other media. -=item B<--sortmedia> I<media1,...,mediaN> -Sort the specified media. Substrings may be used to simplify grouping. -This way, C<media1> will be taken into account first, then C<media2>, and -so on. Media which aren't listed are taken into account after the others. +=back -=item B<--synthesis> I<file> +=head2 Package Selection -Use the specified synthesis file instead of the urpmi database for -searching packages and resolving dependencies. +=over =item B<--auto-select> @@ -127,97 +117,70 @@ Like B<-y>/B<--fuzzy>, but forces to match case-insensitively. Search a source package matching I<name> and it will select all dependencies by default. -=item B<--sources> - -Prints source URLs (or file names) of all selected -packages. - -=item B<--force> - -Continue when requesting packages that are not available. - =item B<--ignorearch> Allow to search packages whose architecture isn't compatible with the architecture of the host. -=item B<--parallel> I<alias> +=item B<-u> -Activate distributed execution of urpmi to other machines (it is mandatory -that urpmi is installed but it is not necessary to have media defined on -any machines). I<alias> defines which extension module to use by urpmi -(currently urpmi-parallel-ka-run or urpmi-parallel-ssh) and which -machines should be updated, this alias is defined in the file -F</etc/urpmi/parallel.cfg> as described below. +Deselect packages if a better version is already installed. -=item B<--root> I<directory> +=item B<-m> -Use the file system tree rooted for rpm install. All operations and -scripts will run after chroot(2). The rpm database in the rooted tree -will be used but urpmi configuration comes from normal system. +Equivalent to B<-du>. -=item B<--urpmi-root> I<directory> +=item B<-a> -Use the file system tree rooted for urpmi database and rpm install. Contrary -to B<--root>, the urpmi configuration comes from the rooted tree. +Select all matches on command line; that's useful when one gives an +incomplete package name and when using B<-f> or B<-r>. -=item B<--wget> +=item B<-c> -Use wget for downloading distant files. By default curl -is used if available, or wget instead. +If maximal closure is used, assume that a package listed may have wrong or +not up-to-date dependencies. This causes more packages to be upgraded and +may correct unresolved dependencies on the rpm database. -=item B<--curl> -Use curl for downloading distant files. By default curl is used if -available, or wget instead. +=item B<-p>, B<--whatprovides> -=item B<--curl-options> I<'options'> +Search in provides to find package. -=item B<--rsync-options> I<'options'> +=item B<--whatrequires> -=item B<--wget-options> I<'options'> +Reverse search to what requires the package given. -Specify additional command-line options to be passed to curl, rsync or -wget when retrieving files. If several options are to be passed, separate -them with spaces and enclose them in quotes. +=item B<--whatrequires-recursive> -Note that the rsync options will also be used for ssh media. +Reverse search to what requires recursively the package given +(looking through virtual packages). -=item B<--proxy> I<proxyhost[:port|1080]> +=back -Use specified HTTP proxy. +=head2 Output Options -=item B<--proxy-user> I<user:password> +=over -Use specified user and password to use for proxy authentication. -Specifying B<--proxy-user=ask> will cause urpmq to prompt for a username -and a password. -=item B<--use-distrib> I<directory> +=item B<-i> -Configure urpmq on the fly from a distribution tree. +Prints useful information in human readable form, as for I<rpm -qi>. -=item B<--env> I<directory> +=item B<-g> -Use a different environment directly from a bug report to replay a bug. -The argument is the same argument given to B<--bug> option. +Prints groups of each package listed. -=item B<--skip> I<pattern,...> +=item B<-r> -You can specify a list of packages which installation should be skipped. -You can also include patterns between //, just like in -F</etc/urpmi/skip.list> (see urpmi.files(5)). +Prints also version and release of each package listed. -=item B<--prefer> I<pattern,...> +=item B<-f> -You can specify a list of packages which installation should be preferred -(especially useful with B<--auto>). -You can also include patterns between //, just like in -F</etc/urpmi/prefer.list> (see urpmi.files(5)). +Prints also version, release and arch of each package listed. -=item B<--wait-lock> +=item B<-l> -If the urpmi or rpm db is busy, wait until it is available +Lists files in packages. =item B<--changelog> @@ -243,6 +206,11 @@ Prints the package requires. Prints the package suggests. +=item B<--sources> + +Prints source URLs (or file names) of all selected +packages. + =item B<--sourcerpm> Prints the sourcerpm of the package @@ -251,65 +219,138 @@ Prints the sourcerpm of the package Prints concise information about the package. -=item B<-v>, B<--verbose> +=item B<-d>, B<--requires-recursive> -Activate verbose mode. +Print dependencies (maximal closure). -=item B<-u> -Deselect packages if a better version is already installed. +=back -=item B<-m> +=head2 Media Selection -Equivalent to B<-du>. +=over -=item B<-a> +=item B<--update> -Select all matches on command line; that's useful when one gives an -incomplete package name and when using B<-f> or B<-r>. +Use only update media. This means that urpmq will search and resolve +dependencies only in media marked as containing updates (e.g. which have +been created with C<urpmi.addmedia --update>). -=item B<-c> +=item B<--media> I<media1,...,mediaN> -If maximal closure is used, assume that a package listed may have wrong or -not up-to-date dependencies. This causes more packages to be upgraded and -may correct unresolved dependencies on the rpm database. +Select specific media to be used, instead of defaulting +to all available media (or all update media if B<--update> is used). +No rpm will be found in other media. -=item B<-d>, B<--requires-recursive> +=item B<--excludemedia> I<media1,...,mediaN> -Print dependencies (maximal closure). +Do not use the specified media. -=item B<-p>, B<--whatprovides> +=item B<--searchmedia> I<media> -Search in provides to find package. +Use only the specified media to search for packages that are specified on +the command-line, or which are found when using B<--auto-select>. +Dependencies of those packages can still be found in other media. -=item B<--whatrequires> +=item B<--sortmedia> I<media1,...,mediaN> -Reverse search to what requires the package given. +Sort the specified media. Substrings may be used to simplify grouping. +This way, C<media1> will be taken into account first, then C<media2>, and +so on. Media which aren't listed are taken into account after the others. -=item B<--whatrequires-recursive> +=item B<--synthesis> I<file> -Reverse search to what requires recursively the package given -(looking through virtual packages). +Use the specified synthesis file instead of the urpmi database for +searching packages and resolving dependencies. -=item B<-i> +=item B<--parallel> I<alias> -Prints useful information in human readable form, as for I<rpm -qi>. +Activate distributed execution of urpmi to other machines (it is mandatory +that urpmi is installed but it is not necessary to have media defined on +any machines). I<alias> defines which extension module to use by urpmi +(currently urpmi-parallel-ka-run or urpmi-parallel-ssh) and which +machines should be updated, this alias is defined in the file +F</etc/urpmi/parallel.cfg> as described below. -=item B<-g> +=item B<--root> I<directory> -Prints groups of each package listed. +Use the file system tree rooted for rpm install. All operations and +scripts will run after chroot(2). The rpm database in the rooted tree +will be used but urpmi configuration comes from normal system. -=item B<-r> +=item B<--urpmi-root> I<directory> -Prints also version and release of each package listed. +Use the file system tree rooted for urpmi database and rpm install. Contrary +to B<--root>, the urpmi configuration comes from the rooted tree. -=item B<-f> -Prints also version, release and arch of each package listed. +=item B<--use-distrib> I<directory> -=item B<-l> +Configure urpmq on the fly from a distribution tree. + +=item B<--skip> I<pattern,...> + +You can specify a list of packages which installation should be skipped. +You can also include patterns between //, just like in +F</etc/urpmi/skip.list> (see urpmi.files(5)). + +=item B<--prefer> I<pattern,...> + +You can specify a list of packages which installation should be preferred +(especially useful with B<--auto>). +You can also include patterns between //, just like in +F</etc/urpmi/prefer.list> (see urpmi.files(5)). + + +=back + +=head2 Download Options + +=over + +=item B<--wget> + +Use wget for downloading distant files. By default curl +is used if available, or wget instead. + +=item B<--curl> + +Use curl for downloading distant files. By default curl is used if +available, or wget instead. + +=item B<--curl-options> I<'options'> + +=item B<--rsync-options> I<'options'> + +=item B<--wget-options> I<'options'> + +Specify additional command-line options to be passed to curl, rsync or +wget when retrieving files. If several options are to be passed, separate +them with spaces and enclose them in quotes. + +Note that the rsync options will also be used for ssh media. + +=item B<--proxy> I<proxyhost[:port|1080]> + +Use specified HTTP proxy. + +=item B<--proxy-user> I<user:password> + +Use specified user and password to use for proxy authentication. +Specifying B<--proxy-user=ask> will cause urpmq to prompt for a username +and a password. + +=back + +=head2 Debugging Options + +=over + +=item B<--env> I<directory> + +Use a different environment directly from a bug report to replay a bug. +The argument is the same argument given to B<--bug> option. -Lists files in packages. =back |