Update zh_TW translation

1 files changed, 6 insertions, 543 deletions

diff --git a/po/zh_TW.po b/po/zh_TW.po
index 448be19b..35d97574 100644
--- a/po/zh_TW.po
+++ b/po/zh_TW.po
@@ -573,7 +573,7 @@ msgstr ""
 #: ../urpm/cdrom.pm:68
 #, c-format
 msgid "HAL daemon (hald) is not running or not ready"
-msgstr ""
+msgstr "系統服務 HAL (hald) 並未執行，或執行失敗"
 
 #: ../urpm/cdrom.pm:161 ../urpm/cdrom.pm:166
 #, c-format
@@ -902,14 +902,14 @@ msgid "installing %s"
 msgstr "正在安裝 %s"
 
 #: ../urpm/main_loop.pm:242
-#, fuzzy, c-format
+#, c-format
 msgid "Try installation without checking dependencies?"
-msgstr "嘗試不檢查相依性直接安裝？ (y/N)(是/否)"
+msgstr "嘗試不檢查相依性直接安裝？"
 
 #: ../urpm/main_loop.pm:249
-#, fuzzy, c-format
+#, c-format
 msgid "Try harder to install (--force)?"
-msgstr "嘗試採用強制安裝的方式 (--force)？ (y/N)(是/否)"
+msgstr "嘗試採用強制安裝的方式 (--force)？"
 
 #: ../urpm/main_loop.pm:288
 #, c-format
@@ -1486,7 +1486,7 @@ msgstr "遺失簽名 (%s)"
 #: ../urpm/sys.pm:178
 #, c-format
 msgid "system"
-msgstr ""
+msgstr "系統"
 
 #: ../urpm/sys.pm:213
 #, c-format
@@ -3170,540 +3170,3 @@ msgstr ""
 #, c-format
 msgid "No changelog found\n"
 msgstr "沒有找到更新紀錄\n"
-
-#~ msgid "Updating media...\n"
-#~ msgstr "正在更新媒體...\n"
-
-#~ msgid "examining %s file"
-#~ msgstr "正在檢驗 %s 檔案"
-
-#, fuzzy
-#~ msgid "found probed synthesis as %s"
-#~ msgstr "發現尋找到的 hdlist (或 synthesis) 為 %s"
-
-#~ msgid "  --update       - create an update medium.\n"
-#~ msgstr "  --update       - 建立更新的媒體。\n"
-
-#~ msgid "malformed URL: [%s]"
-#~ msgstr "畸形的 URL：[%s]"
-
-#~ msgid "Error"
-#~ msgstr "錯誤"
-
-#~ msgid "%d installation transaction failed"
-#~ msgid_plural "%d installation transactions failed"
-#~ msgstr[0] "%d 個安裝程序失敗"
-
-#~ msgid "Package %s can not be installed"
-#~ msgstr "%s 套件無法安裝"
-
-#~ msgid "Checking to remove the following packages"
-#~ msgstr "正在檢查以移除下列套件"
-
-#~ msgid "%s database locked"
-#~ msgstr "%s 資料庫被鎖住了"
-
-#, fuzzy
-#~ msgid ""
-#~ "  --auto         - non-interactive mode, assume default answers to "
-#~ "questions.    --auto\n"
-#~ msgstr "  --auto         - 非互動式模式，對問題使用預設的回答。\n"
-
-#~ msgid "Unknown option %s"
-#~ msgstr "未知的選項 %s"
-
-#~ msgid "too many mount points for removable medium \"%s\""
-#~ msgstr "可移除式媒體 \"%s\" 的掛載點過多"
-
-#~ msgid "Medium \"%s\" is an ISO image, will be mounted on-the-fly"
-#~ msgstr "媒體 \"%s\" 是一個光碟映像檔，將立即掛載起來"
-
-#~ msgid "using different removable device [%s] for \"%s\""
-#~ msgstr "使用不同的可移除式裝置 [%s] 於 \"%s\" "
-
-#~ msgid "unable to retrieve pathname for removable medium \"%s\""
-#~ msgstr "無法擷取可移除式媒體 \"%s\" 的路徑名稱"
-
-#, fuzzy
-#~ msgid "unable to mount the distribution medium"
-#~ msgstr "無法存取第一個安裝媒體"
-
-#~ msgid ""
-#~ "unable to access medium \"%s\",\n"
-#~ "this could happen if you mounted manually the directory when creating the "
-#~ "medium."
-#~ msgstr ""
-#~ "無法存取媒體 \"%s\"，\n"
-#~ "這可能是因為您建立媒體時是手動將這個目錄掛載到系統裡的。"
-
-#~ msgid "inconsistent medium \"%s\" marked removable but not really"
-#~ msgstr "自相矛盾的媒體 \"%s\" 標示為可移除但是事實上卻不是這麼一回事"
-
-#~ msgid "  -c             - clean headers cache directory.\n"
-#~ msgstr "  -c             - 清除標頭快取目錄。\n"
-
-#~ msgid "virtual medium needs to be local"
-#~ msgstr "虛擬媒體必須在本地端"
-
-#~ msgid "Error generating names file: Can't write to file (%s)"
-#~ msgstr "生成名稱檔案時發生錯誤：無法寫入檔案 (%s)"
-
-#, fuzzy
-#~ msgid "unable to parse synthesis file of \"%s\""
-#~ msgstr "無法解析 \"%s\" 的 hdlist 檔案"
-
-#, fuzzy
-#~ msgid "computing md5sum of existing source hdlist (or synthesis) [%s]"
-#~ msgstr "計算來源 hdlist (或 synthesis) 的 md5sum"
-
-#~ msgid ""
-#~ "virtual medium \"%s\" should not have defined hdlist or list file, medium "
-#~ "ignored"
-#~ msgstr "虛擬媒體 \"%s\" 不應該指定 hdlist 或列表檔案，忽略這個媒體"
-
-#, fuzzy
-#~ msgid "invalid hdlist name"
-#~ msgstr "無效的 rpm 檔案名稱 [%s]"
-
-#~ msgid "unable to find list file for \"%s\", medium ignored"
-#~ msgstr "無法找到 \"%s\" 的列表檔案，忽略這個媒體"
-
-#, fuzzy
-#~ msgid "\"synthesis\" should not be set (medium \"%s\")"
-#~ msgstr "正在嘗試選擇不存在的媒體 \"%s\""
-
-#, fuzzy
-#~ msgid "\"synthesis\" should be set (medium \"%s\")"
-#~ msgstr "為媒體 \"%s\" 建立 hdlist synthesis 檔"
-
-#, fuzzy
-#~ msgid "unable to access list file of \"%s\""
-#~ msgstr "無法解析 \"%s\" 的 hdlist 檔案"
-
-#~ msgid "medium \"%s\" trying to use an already used hdlist, medium ignored"
-#~ msgstr "媒體 \"%s\" 正在嘗試使用一個已經被使用的 hdlist，忽略這個媒體"
-
-#~ msgid "medium \"%s\" trying to use an already used list, medium ignored"
-#~ msgstr "媒體 \"%s\" 正在嘗試使用一個已經被使用的列表，忽略這個媒體"
-
-#, fuzzy
-#~ msgid ""
-#~ "Note: no hdlist for medium \"%s\", unable to return any result for it"
-#~ msgstr ""
-#~ "注意：因為所有搜尋過的媒體都沒有使用 hdlists，所以 urpmf 無法回傳任何結"
-#~ "果\n"
-
-#~ msgid "performing second pass to compute dependencies\n"
-#~ msgstr "正在進行第二個步驟，相依性的計算\n"
-
-#~ msgid "building hdlist [%s]"
-#~ msgstr "正在建立 hdlist [%s]"
-
-#~ msgid ""
-#~ "Unable to build synthesis file for medium \"%s\". Your hdlist file may be "
-#~ "corrupted."
-#~ msgstr "無法為媒介 \"%s\" 建立 synthesis 檔。您的 hdlist 檔可能並不標準。"
-
-#~ msgid "problem reading hdlist or synthesis file of medium \"%s\""
-#~ msgstr "讀取 \"%s\" 媒體的 hdlist 或 synthesis 檔案時發生問題"
-
-#~ msgid "computing md5sum of copied source hdlist (or synthesis)"
-#~ msgstr "正在計算複製的來源 hdlist (或 synthesis) 的 md5sum"
-
-#~ msgid "...retrieving failed: md5sum mismatch"
-#~ msgstr "...擷取失敗：md5sum 不合"
-
-#~ msgid "no rpm files found from [%s]"
-#~ msgstr "在 [%s] 內找不到 rpm 檔案"
-
-#~ msgid "unable to read rpm files from [%s]: %s"
-#~ msgstr "無法由 [%s] 讀取 rpm 套件：%s"
-
-#~ msgid "no rpms read"
-#~ msgstr "沒有讀取到任何的 rpm"
-
-#~ msgid "reading headers from medium \"%s\""
-#~ msgstr "正在讀取媒體 \"%s\" 的標頭"
-
-#, fuzzy
-#~ msgid "    --probe-synthesis - use synthesis file.\n"
-#~ msgstr "  --probe-synthesis - 嘗試尋找並使用 synthesis 檔案。\n"
-
-#, fuzzy
-#~ msgid "    --probe-hdlist - use hdlist file.\n"
-#~ msgstr "  --probe-hdlist - 嘗試尋找並使用 hdlist 檔案。\n"
-
-#~ msgid ""
-#~ "Note: since no media searched uses hdlists, urpmf was unable to return "
-#~ "any result\n"
-#~ msgstr ""
-#~ "注意：因為所有搜尋過的媒體都沒有使用 hdlists，所以 urpmf 無法回傳任何結"
-#~ "果\n"
-
-#~ msgid "You may want to use --name to search for package names.\n"
-#~ msgstr "您或許想要使用 --name 參數來搜尋套件名稱。\n"
-
-#~ msgid "  --src, -s      - next package is a source package.\n"
-#~ msgstr "  --src, -s      - 下個套件是原始碼套件。\n"
-
-#, fuzzy
-#~ msgid "  --probe-hdlist - use hdlist file.\n"
-#~ msgstr "  --probe-hdlist - 嘗試尋找並使用 hdlist 檔案。\n"
-
-#~ msgid "unable to update medium \"%s\"\n"
-#~ msgstr "無法更新媒體 \"%s\"\n"
-
-#~ msgid "unable to create medium \"%s\"\n"
-#~ msgstr "無法建立媒體 \"%s\"\n"
-
-#~ msgid "there are multiple packages with the same rpm filename \"%s\""
-#~ msgstr "有多個套件具有相同的 rpm 檔名 \"%s\""
-
-#~ msgid "unable to correctly parse [%s] on value \"%s\""
-#~ msgstr "在值 \"%2$s\" 上無法正確解析 [%1$s]"
-
-#~ msgid "(retry as root?)"
-#~ msgstr "(以 root 重試？)"
-
-#~ msgid ""
-#~ "medium \"%s\" uses an invalid list file:\n"
-#~ "  mirror is probably not up-to-date, trying to use alternate method"
-#~ msgstr ""
-#~ "媒體 \"%s\" 使用一個無效的列表檔案：\n"
-#~ "  映射站可能不在最新狀態，正在嘗試使用替代的方案"
-
-#~ msgid "medium \"%s\" does not define any location for rpm files"
-#~ msgstr "媒體 \"%s\" 沒有定義任何 rpm 檔案的位置"
-
-#~ msgid "unrequested"
-#~ msgstr "未被要求"
-
-#~ msgid " (%d MB)"
-#~ msgstr " (%d MB)"
-
-#~ msgid "adding package %s (id=%d, eid=%d, update=%d, file=%s)"
-#~ msgstr "正在新增套件 %s (id = %d，eid = %d，更新 = %d，檔案 = %s)"
-
-#~ msgid ""
-#~ "The following packages have bad signatures:\n"
-#~ "%s\n"
-#~ "\n"
-#~ "Do you want to continue installation ?"
-#~ msgstr ""
-#~ "下列套件的簽章並不正確：\n"
-#~ "%s\n"
-#~ "\n"
-#~ "您要繼續安裝嗎？"
-
-#~ msgid "You need to be root to use --use-distrib"
-#~ msgstr "您必須是 root 才能使用 --use-distrib"
-
-#~ msgid "unable to remove package %s"
-#~ msgstr "無法移除套件 %s"
-
-#~ msgid "No filelist found\n"
-#~ msgstr "沒有找到檔案列表\n"
-
-#~ msgid ""
-#~ "To satisfy dependencies, the following %d packages will be removed (%d MB)"
-#~ msgstr "為了滿足相依性，下列 %d 個套件將被移除 (%d MB)"
-
-#~ msgid "(%d packages, %d MB)"
-#~ msgstr "(%d 個套件，共 %d MB)"
-
-#~ msgid ""
-#~ "  -P             - do not search in provides to find package (default).\n"
-#~ msgstr "  -P             - 不於 provides 中搜尋套件 (預設值)。\n"
-
-#~ msgid "  -R             - reverse search to what requires package.\n"
-#~ msgstr "  -R             - 逆向搜尋何者需要此套件。\n"
-
-#~ msgid ""
-#~ "  -RR            - extended reverse search (includes virtual packages).\n"
-#~ msgstr "  -RR            - 進階逆向搜尋 (包含虛擬套件)。\n"
-
-#~ msgid ""
-#~ "To satisfy dependencies, the following %d packages are going to be "
-#~ "installed:\n"
-#~ "%s\n"
-#~ msgstr ""
-#~ "為了滿足相依性的需求，下面的 %d 個套件也必須一併安裝：\n"
-#~ "%s\n"
-
-#~ msgid "skipping media %s: no hdlist"
-#~ msgstr "略過媒體 %s：沒有 hdlist 檔"
-
-#~ msgid "node %s has an old version of urpme, please upgrade"
-#~ msgstr "節點 %s 使用的是舊版的 urpme，請升級"
-
-#~ msgid "Propagating synthesis to nodes..."
-#~ msgstr "正在將綜合文件同步到節點..."
-
-#~ msgid "Resolving dependencies on nodes..."
-#~ msgstr "正在處理節點的相依性"
-
-#~ msgid "Distributing files to nodes..."
-#~ msgstr "正在將檔案發佈到節點..."
-
-#~ msgid "Verifying if install is possible on nodes..."
-#~ msgstr "正在驗證是否可在節點上進行安裝..."
-
-#~ msgid "Installing packages on nodes..."
-#~ msgstr "正在由節點安裝套件..."
-
-#~ msgid "Propagating synthesis to %s..."
-#~ msgstr "正在將綜合文件傳送到 %s..."
-
-#~ msgid "Resolving dependencies on %s..."
-#~ msgstr "正在解决 %s 上的相依性..."
-
-#~ msgid "Distributing files to %s..."
-#~ msgstr "正在發佈檔案到 %s"
-
-#~ msgid "Verifying if install is possible on %s..."
-#~ msgstr "正在驗證使不可以在 %s 上進行安裝..."
-
-#~ msgid "Performing install on %s..."
-#~ msgstr "正在 %s 上進行安装..."
-
-#~ msgid "Preparing install on %s..."
-#~ msgstr "正在準備安裝到 %s 上..."
-
-#~ msgid "  --probe-synthesis - try to find and use synthesis file.\n"
-#~ msgstr "  --probe-synthesis - 嘗試尋找並使用 synthesis 檔案。\n"
-
-#~ msgid "  --probe-hdlist - try to find and use hdlist file.\n"
-#~ msgstr "  --probe-hdlist - 嘗試尋找並使用 hdlist 檔案。\n"
-
-#~ msgid "`with' missing for network media\n"
-#~ msgstr "使用網路媒體時遺漏了 `with'\n"
-
-#~ msgid ""
-#~ "\n"
-#~ "unknown options '%s'\n"
-#~ msgstr ""
-#~ "\n"
-#~ "未知的選項 '%s'\n"
-
-#~ msgid "unable to find hdlist file for \"%s\", medium ignored"
-#~ msgstr "無法找到 \"%s\" 的 hdlist 檔案，忽略這個媒體"
-
-#~ msgid "inconsistent list file for \"%s\", medium ignored"
-#~ msgstr "\"%s\" 的列表檔案自相矛盾，忽略這個媒體"
-
-#~ msgid "unable to inspect list file for \"%s\", medium ignored"
-#~ msgstr "無法檢查 \"%s\" 的清單檔案，忽略這個媒體"
-
-#~ msgid "there doesn't seem to be devices in the chroot in \"%s\""
-#~ msgstr "似乎沒有裝置在位於 \"%s\" 的 chroot 內"
-
-#~ msgid "virtual medium \"%s\" is not local, medium ignored"
-#~ msgstr "虛擬媒體 \"%s\" 不在本地端，忽略這個媒體"
-
-#~ msgid ""
-#~ "virtual medium \"%s\" should have valid source hdlist or synthesis, "
-#~ "medium ignored"
-#~ msgstr ""
-#~ "虛擬媒體 \"%s\" 應該有個有效的來源 hdlist 或 synthesis 檔案，忽略這個媒體"
-
-#~ msgid "copying source hdlist (or synthesis) of \"%s\"..."
-#~ msgstr "正在複製 \"%s\" 的來源 hdlist (或 synthesis)..."
-
-#~ msgid "retrieval of source hdlist (or synthesis) failed"
-#~ msgstr "擷取來源 hdlist (或 synthesis) 失敗"
-
-#~ msgid "file [%s] already used in the same medium \"%s\""
-#~ msgstr "檔案 [%s] 已經在相同的媒體 \"%s\" 中使用了"
-
-#~ msgid "nothing written in list file for \"%s\""
-#~ msgstr "沒有寫入資料到 \"%s\" 的列表檔"
-
-#~ msgid "found %d headers in cache"
-#~ msgstr "在快取中找到 %d 個標頭"
-
-#~ msgid "removing %d obsolete headers in cache"
-#~ msgstr "正在移除 %d 個在快取內被廢棄的標頭"
-
-#~ msgid "using process %d for executing transaction"
-#~ msgstr "正在使用第 %d 號程序執行交辦的安裝程序"
-
-#~ msgid "  --norebuild    - don't try to rebuild hdlist if not readable.\n"
-#~ msgstr ""
-#~ "  --norebuild    - 如果 hdlist 檔案無法讀取，不要嘗試重新建立\n"
-#~ "                   它。\n"
-
-#~ msgid "The following package names were assumed: %s"
-#~ msgstr "以下套件名稱是臆測的：%s"
-
-#~ msgid "copying hdlists file..."
-#~ msgstr "正在複製 hdlist 檔案..."
-
-#~ msgid "invalid hdlist description \"%s\" in hdlists file"
-#~ msgstr "hdlists 檔案中包含了無效的 hdlist 敘述 \"%s\""
-
-#~ msgid "Is this OK?"
-#~ msgstr "這樣可以嗎？"
-
-#~ msgid ""
-#~ "  --version      - use specified distribution version, the default is "
-#~ "taken\n"
-#~ "                   from the version of the distribution told by the\n"
-#~ "                   installed mandriva-release package.\n"
-#~ msgstr ""
-#~ "  --version      - 使用指定的散佈套件版號，預設值決定於安裝於系統上的\n"
-#~ "                   mandriva-release 套件回報的散佈套件版本。\n"
-
-#~ msgid ""
-#~ "  --arch         - use specified architecture, the default is arch of\n"
-#~ "                   mandriva-release package installed.\n"
-#~ msgstr ""
-#~ "  --arch         - 使用指定的硬體平台，預設值決定於安裝於系統上的\n"
-#~ "                   mandriva-release 套件所使用的平台。\n"
-
-#~ msgid ""
-#~ "  --headers      - extract headers for package listed from urpmi db to\n"
-#~ "                   stdout (root only).\n"
-#~ msgstr ""
-#~ "  --headers      - 由 urpmi 資料庫中擷取套件標頭到標準輸出 (僅供管理者\n"
-#~ "                   使用)。\n"
-
-#~ msgid "rpm2header utility not found, impossible to use the --header option"
-#~ msgstr "找不到 rpm2header 這個工具，無法使用 --header 這個選項"
-
-#~ msgid ""
-#~ "To satisfy dependencies, the following %d packages are going to be "
-#~ "installed (%d MB)"
-#~ msgstr "為了滿足相依性，下列的 %d 個套件 (%d MB) 將一併安裝"
-
-#~ msgid "installing %s\n"
-#~ msgstr "正在安裝 %s\n"
-
-#~ msgid ""
-#~ "Automatic installation of packages...\n"
-#~ "You requested installation of package %s\n"
-#~ msgstr ""
-#~ "自動化套件安裝...\n"
-#~ "您要求安裝的套件 %s\n"
-
-#~ msgid "%s: command not found\n"
-#~ msgstr "%s：找不到指令\n"
-
-#~ msgid ""
-#~ "Some package requested cannot be installed:\n"
-#~ "%s\n"
-#~ "Continue?"
-#~ msgstr ""
-#~ "某些要求的套件無法安裝：\n"
-#~ "%s\n"
-#~ "要繼續嗎？"
-
-#~ msgid ""
-#~ "The following packages have to be removed for others to be upgraded:\n"
-#~ "%s\n"
-#~ "Continue?"
-#~ msgstr ""
-#~ "下列套件必須移除以便升級其他的套件：\n"
-#~ "%s\n"
-#~ "要繼續嗎？"
-
-#~ msgid "md5sum mismatch"
-#~ msgstr "md5sum 不合"
-
-#~ msgid ""
-#~ "urpmf version %s\n"
-#~ "Copyright (C) 2002-2004 Mandriva.\n"
-#~ "This is free software and may be redistributed under the terms of the GNU "
-#~ "GPL.\n"
-#~ "\n"
-#~ "usage:\n"
-#~ msgstr ""
-#~ "urpmf 版本 %s\n"
-#~ "Copyright (C) 2002-2004 Mandriva。\n"
-#~ "這是自由軟體並可於 GNU GPL 條款下重新散佈。\n"
-#~ "\n"
-#~ "使用方式：\n"
-
-#~ msgid "  --synthesis    - use the synthesis given instead of urpmi db.\n"
-#~ msgstr "  --synthesis    - 使用給定的 synthesis 檔，而非 urpmi 資料庫。\n"
-
-#~ msgid ""
-#~ "  --quiet        - do not print tag name (default if no tag given on "
-#~ "command\n"
-#~ "                   line, incompatible with interactive mode).\n"
-#~ msgstr ""
-#~ "  --quiet        - 不顯示標籤名稱 (除非在命令列給定參數，否則此為預\n"
-#~ "                   設值；此外本模式並不相容於互動模式)。\n"
-
-#~ msgid "  --uniq         - do not print identical lines.\n"
-#~ msgstr "  --uniq         - 不顯示相同的訊息。\n"
-
-#~ msgid "  --all          - print all tags.\n"
-#~ msgstr "  --all          - 顯示全部的標籤。\n"
-
-#~ msgid "  --summary      - print tag summary: summary.\n"
-#~ msgstr "  --summary      - 列印摘要標籤：摘要。\n"
-
-#~ msgid "  --description  - print tag description: description.\n"
-#~ msgstr "  --description   - 顯示描述標籤：描述。\n"
-
-#~ msgid "  --buildhost    - print tag buildhost: build host.\n"
-#~ msgstr "  --buildhost    - 顯示建立主機標籤：建立主機。\n"
-
-#~ msgid "  --provides     - print tag provides: all provides.\n"
-#~ msgstr "  --provides     - 顯示提供標籤：提供。\n"
-
-#~ msgid "  --requires     - print tag requires: all requires.\n"
-#~ msgstr "  --requires     - 顯示需要標籤：需要。\n"
-
-#~ msgid "  --files        - print tag files: all files.\n"
-#~ msgstr "  --files        - 顯示檔案標籤：檔案。\n"
-
-#~ msgid "  --obsoletes    - print tag obsoletes: all obsoletes.\n"
-#~ msgstr "  --obsoletes    - 顯示廢棄標籤：廢棄。\n"
-
-#~ msgid ""
-#~ "  --env          - use specific environment (typically a bug\n"
-#~ "                   report).\n"
-#~ msgstr "  --env          - 使用特定環境 (一般用於臭蟲回報)。\n"
-
-#~ msgid "  -i             - ignore case distinctions in every pattern.\n"
-#~ msgstr "  -i             - 忽略每個樣版中的大小寫差異。\n"
-
-#~ msgid ""
-#~ "  -a             - binary AND operator, true if both expression are "
-#~ "true.\n"
-#~ msgstr "  -a             - 二元 AND 運算子，若兩表示式皆真則其值為真。\n"
-
-#~ msgid ""
-#~ "  -o             - binary OR operator, true if one expression is true.\n"
-#~ msgstr "  -o             - 二元 OR 運算子，若表示式之一為真則其值為真。\n"
-
-#~ msgid "  !              - unary NOT, true if expression is false.\n"
-#~ msgstr "  !              - 一元 NOT 運算子，若表示式假則其值為真。\n"
-
-#~ msgid "  (              - left parenthesis to open group expression.\n"
-#~ msgstr "  (              - 左括弧用來表示一組表示式的開始。\n"
-
-#~ msgid "  )              - right parenthesis to close group expression.\n"
-#~ msgstr "  )              - 右括弧用來表示一組表示式的結束。\n"
-
-#~ msgid ""
-#~ "callback is:\n"
-#~ "%s\n"
-#~ msgstr ""
-#~ "回傳值：\n"
-#~ "%s\n"
-
-#~ msgid ""
-#~ "\n"
-#~ "Continue?"
-#~ msgstr ""
-#~ "\n"
-#~ "要繼續嗎？"
-
-#~ msgid ""
-#~ "Some package requested cannot be installed:\n"
-#~ "%s"
-#~ msgstr ""
-#~ "某些要求的套件無法安裝：\n"
-#~ "%s"