sync with code

1 files changed, 726 insertions, 458 deletions

diff --git a/po/zh_TW.po b/po/zh_TW.po
index d97787e9..87e7385a 100644
--- a/po/zh_TW.po
+++ b/po/zh_TW.po
@@ -22,7 +22,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: zh_TW\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2006-11-29 02:27+0100\n"
+"POT-Creation-Date: 2007-01-09 14:14+0100\n"
 "PO-Revision-Date: 2006-09-01 21:32+0800\n"
 "Last-Translator: Shiva Huang <shivahuang@gmail.com>\n"
 "Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
@@ -31,7 +31,8 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.0.2\n"
 
-#: ../gurpmi:30 ../gurpmi2:62
+#: ../gurpmi:30 ../gurpmi2:63
+#, c-format
 msgid "RPM installation"
 msgstr "RPM 套件安裝"
 
@@ -40,7 +41,8 @@ msgstr "RPM 套件安裝"
 msgid "Error: unable to find file %s, will cancel operation"
 msgstr "錯誤：無法找到檔案 %s，作業將取消"
 
-#: ../gurpmi:45 ../gurpmi2:150 ../gurpmi2:173
+#: ../gurpmi:45 ../gurpmi2:152 ../gurpmi2:175
+#, c-format
 msgid "_Ok"
 msgstr "確定 (_O)"
 
@@ -95,20 +97,23 @@ msgstr ""
 "\n"
 "您或許傾向儲存而非安裝它。您的選擇是什麼？"
 
-#. - buttons
 #: ../gurpmi:97
+#, c-format
 msgid "_Install"
 msgstr "安裝 (_I)"
 
 #: ../gurpmi:98
+#, c-format
 msgid "_Save"
 msgstr "儲存 (_S)"
 
-#: ../gurpmi:99 ../gurpmi2:150
+#: ../gurpmi:99 ../gurpmi2:152
+#, c-format
 msgid "_Cancel"
 msgstr "取消 (_C)"
 
 #: ../gurpmi:107
+#, c-format
 msgid "Choose location to save file"
 msgstr "選擇存檔的位置"
 
@@ -118,18 +123,21 @@ msgid "Unknown option %s"
 msgstr "未知的選項 %s"
 
 #: ../gurpmi.pm:89
+#, c-format
 msgid "No packages specified"
 msgstr "未指定套件"
 
 #: ../gurpmi2:43
+#, c-format
 msgid "Please wait..."
 msgstr "請稍候..."
 
 #: ../gurpmi2:52
+#, c-format
 msgid "Must be root"
 msgstr "必須擁有管理者權限"
 
-#: ../gurpmi2:86
+#: ../gurpmi2:87
 #, c-format
 msgid ""
 "Some requested packages cannot be installed:\n"
@@ -140,35 +148,42 @@ msgstr ""
 "%s\n"
 "無論如何都要繼續安裝嗎？"
 
-#: ../gurpmi2:110 ../urpmi:618
-msgid "Ok"
-msgstr "確定"
-
-#: ../gurpmi2:110
+#: ../gurpmi2:111
+#, c-format
 msgid "Warning"
 msgstr "警告"
 
-#: ../gurpmi2:146
+#: ../gurpmi2:111 ../urpmi:624
+#, c-format
+msgid "Ok"
+msgstr "確定"
+
+#: ../gurpmi2:148
+#, c-format
 msgid " (to upgrade)"
 msgstr " (升級用)"
 
-#: ../gurpmi2:147
+#: ../gurpmi2:149
+#, c-format
 msgid " (to install)"
 msgstr " (安裝用)"
 
-#: ../gurpmi2:150
+#: ../gurpmi2:152
+#, c-format
 msgid "Package choice"
 msgstr "套件選擇"
 
-#: ../gurpmi2:151 ../urpmi:448
+#: ../gurpmi2:153 ../urpmi:449
+#, c-format
 msgid "One of the following packages is needed:"
 msgstr "需要下列套件之一："
 
-#: ../gurpmi2:174
+#: ../gurpmi2:176
+#, c-format
 msgid "_Abort"
 msgstr "放棄 (_A)"
 
-#: ../gurpmi2:194
+#: ../gurpmi2:196
 #, c-format
 msgid ""
 "The following packages have to be removed for others to be upgraded:\n"
@@ -179,7 +194,7 @@ msgstr ""
 "%s\n"
 "無論如何都要繼續安裝嗎？"
 
-#: ../gurpmi2:208
+#: ../gurpmi2:210
 #, c-format
 msgid ""
 "To satisfy dependencies, the following %d packages are going to be "
@@ -189,25 +204,27 @@ msgstr ""
 "為了滿足相依性的需求，下面的 %d 個套件也必須一併安裝：\n"
 "%s\n"
 
-#: ../gurpmi2:215
+#: ../gurpmi2:217
+#, c-format
 msgid "Package installation..."
 msgstr "套件安裝..."
 
-#: ../gurpmi2:217 ../urpmi:602
+#: ../gurpmi2:219 ../urpmi:608
+#, c-format
 msgid "unable to get source packages, aborting"
 msgstr "無法取得原始碼套件，放棄"
 
-#: ../gurpmi2:229 ../urpmi:611
+#: ../gurpmi2:231 ../urpmi:617
 #, c-format
 msgid "Please insert the medium named \"%s\" on device [%s]"
 msgstr "請將名為 \"%s\" 的媒體置入裝置 [%s] 內"
 
-#: ../gurpmi2:254
+#: ../gurpmi2:256
 #, c-format
 msgid "Downloading package `%s'..."
 msgstr "正在下載套件 `%s'..."
 
-#: ../gurpmi2:269
+#: ../gurpmi2:271
 #, c-format
 msgid ""
 "The following packages have bad signatures:\n"
@@ -220,8 +237,7 @@ msgstr ""
 "\n"
 "您要繼續安裝嗎？"
 
-#. - Warning : the following message is parsed in urpm::parallel_*
-#: ../gurpmi2:276 ../gurpmi2:334 ../urpmi:677 ../urpmi:805
+#: ../gurpmi2:278 ../gurpmi2:336 ../urpmi:684 ../urpmi:814
 #, c-format
 msgid ""
 "Installation failed, some files are missing:\n"
@@ -232,35 +248,38 @@ msgstr ""
 "%s\n"
 "您或許要更新您的 urpmi 資料庫"
 
-#. - Warning : the following message is parsed in urpm::parallel_*
-#: ../gurpmi2:283 ../urpme:139 ../urpmi:726
+#: ../gurpmi2:285 ../urpme:138 ../urpmi:735
 #, c-format
 msgid "removing %s"
 msgstr "正在移除 %s"
 
-#: ../gurpmi2:289
+#: ../gurpmi2:291
+#, c-format
 msgid "Preparing..."
 msgstr "準備中..."
 
-#: ../gurpmi2:293
+#: ../gurpmi2:295
 #, c-format
 msgid "Installing package `%s' (%s/%s)..."
 msgstr "正在安裝套件 `%s' (%s/%s)..."
 
-#. - Warning : the following message is parsed in urpm::parallel_*
-#: ../gurpmi2:318 ../urpmi:689 ../urpmi:765 ../urpmi:782
+#: ../gurpmi2:320 ../urpmi:696 ../urpmi:774 ../urpmi:791
+#, c-format
 msgid "Installation failed"
 msgstr "安裝失敗"
 
-#: ../gurpmi2:329
+#: ../gurpmi2:331
+#, c-format
 msgid "_Done"
 msgstr "完成 (_D)"
 
-#: ../gurpmi2:337
+#: ../gurpmi2:339
+#, c-format
 msgid "The package(s) are already installed"
 msgstr "每個套件都已經安裝了"
 
-#: ../gurpmi2:339
+#: ../gurpmi2:341
+#, c-format
 msgid "Installation finished"
 msgstr "安裝完畢"
 
@@ -274,19 +293,22 @@ msgstr ""
 "其中 [選項] 是由\n"
 
 #: ../rpm-find-leaves:16
+#, c-format
 msgid "   -h|--help      - print this help message.\n"
 msgstr "   -h|--help      - 顯示此說明訊息。\n"
 
 #: ../rpm-find-leaves:17
+#, c-format
 msgid "   --root <path>  - use the given root instead of /\n"
 msgstr "   --root <path>  - 使用給定的根目錄而非 /\n"
 
 #: ../rpm-find-leaves:18
+#, c-format
 msgid "   -g [group]     - restrict results to specified group.\n"
 msgstr "   -g [group]     - 限制為指定群組內的結果。\n"
 
 #: ../rpm-find-leaves:19
-#, fuzzy
+#, fuzzy, c-format
 msgid "   -f             - output rpm full name (NVRA)\n"
 msgstr "  -g             - 顯示群組名稱。\n"
 
@@ -295,210 +317,127 @@ msgstr "  -g             - 顯示群組名稱。\n"
 msgid "                    defaults to %s.\n"
 msgstr "                    預設為 %s。\n"
 
-#. - need to be root if binary rpms are to be installed
-#: ../rurpmi:11 ../urpmi:267
+#: ../rurpmi:11 ../urpmi:265
+#, c-format
 msgid "Only superuser is allowed to install packages"
 msgstr "只有擁有管理者權限的使用者才能安裝套件"
 
 #: ../rurpmi:18
+#, c-format
 msgid "Running urpmi in restricted mode..."
 msgstr "以限制模式執行 urpmi..."
 
-#: ../urpm.pm:73
+#: ../urpm.pm:93
+#, c-format
 msgid "unable to open rpmdb"
 msgstr "無法開啟 rpmdb"
 
-#: ../urpm.pm:92
+#: ../urpm.pm:112
 #, c-format
 msgid "found %d rpm headers in cache, removing %d obsolete headers"
 msgstr ""
 
-#: ../urpm.pm:108
+#: ../urpm.pm:128
 #, c-format
 msgid "invalid rpm file name [%s]"
 msgstr "無效的 rpm 檔案名稱 [%s]"
 
-#: ../urpm.pm:114
+#: ../urpm.pm:134
 #, c-format
 msgid "retrieving rpm file [%s] ..."
 msgstr "正在擷取 rpm 檔案 [%s] ..."
 
-#: ../urpm.pm:116
+#: ../urpm.pm:136
+#, c-format
 msgid "...retrieving done"
 msgstr "...擷取完成"
 
-#: ../urpm.pm:119
+#: ../urpm.pm:139
 #, c-format
 msgid "...retrieving failed: %s"
 msgstr "...擷取失敗：%s"
 
-#: ../urpm.pm:124
+#: ../urpm.pm:144
 #, c-format
 msgid "unable to access rpm file [%s]"
 msgstr "無法存取 rpm 檔案 [%s]"
 
-#: ../urpm.pm:129
+#: ../urpm.pm:149
 #, c-format
 msgid "unable to parse spec file %s [%s]"
 msgstr "無法解析 spec 檔案 %s [%s]"
 
-#: ../urpm.pm:139
+#: ../urpm.pm:159
+#, c-format
 msgid "unable to register rpm file"
 msgstr "無法註冊 rpm 檔案"
 
-#: ../urpm.pm:141
+#: ../urpm.pm:161
 #, c-format
 msgid "Incompatible architecture for rpm [%s]"
 msgstr "與 RPM 檔案 [%s] 不相容的硬體架構"
 
-#: ../urpm.pm:145
+#: ../urpm.pm:165
+#, c-format
 msgid "error registering local packages"
 msgstr "註冊本地端套件錯誤"
 
-#: ../urpm.pm:241
+#: ../urpm.pm:261
+#, c-format
 msgid "This operation is forbidden while running in restricted mode"
 msgstr "使用限制模式執行時禁止該操作程序"
 
-#: ../urpm/args.pm:101 ../urpm/args.pm:110
+#: ../urpm/args.pm:109 ../urpm/args.pm:118
+#, c-format
 msgid "bad proxy declaration on command line\n"
 msgstr "命令列傳入的代理伺服器宣告錯誤\n"
 
-#: ../urpm/args.pm:125 ../urpm/args.pm:236
-#, fuzzy
+#: ../urpm/args.pm:133
+#, fuzzy, c-format
 msgid "chroot directory doesn't exist"
 msgstr "環境目錄 %s 不存在"
 
 #: ../urpm/args.pm:242
+#, c-format
 msgid "You need to be root to use --use-distrib"
 msgstr "您必須是 root 才能使用 --use-distrib"
 
-#: ../urpm/args.pm:274
+#: ../urpm/args.pm:273
 #, c-format
 msgid "urpmq: cannot read rpm file \"%s\"\n"
 msgstr "urpmq：無法讀取 rpm 檔案 \"%s\"\n"
 
-#: ../urpm/args.pm:418
+#: ../urpm/args.pm:423
 #, c-format
 msgid "Can't use %s without %s"
 msgstr ""
 
-#: ../urpm/args.pm:432
+#: ../urpm/args.pm:426
+#, c-format
+msgid "Can't use %s with %s"
+msgstr ""
+
+#: ../urpm/args.pm:440
+#, c-format
 msgid "Too many arguments\n"
 msgstr "參數太多\n"
 
-#: ../urpm/msg.pm:52 ../urpmi:486 ../urpmi:504 ../urpmi:591
+#: ../urpm/msg.pm:52 ../urpmi:489 ../urpmi:508 ../urpmi:597
+#, c-format
 msgid "Nn"
 msgstr "Nn否"
 
-#. Translator: Add here the keys which might be pressed in the "Yes"-case.
-#: ../urpm/msg.pm:53 ../urpme:36 ../urpmi:487 ../urpmi:505 ../urpmi:542
-#: ../urpmi:592 ../urpmi:668 ../urpmi:753 ../urpmi.addmedia:133
+#: ../urpm/msg.pm:53 ../urpme:36 ../urpmi:490 ../urpmi:509 ../urpmi:549
+#: ../urpmi:598 ../urpmi:675 ../urpmi:762 ../urpmi.addmedia:134
+#, c-format
 msgid "Yy"
 msgstr "Yy是"
 
-#: ../urpm/msg.pm:98
+#: ../urpm/msg.pm:104
+#, c-format
 msgid "Sorry, bad choice, try again\n"
 msgstr "抱歉，選擇錯誤，請再試一次\n"
 
-#: ../urpm/parallel_ka_run.pm:32 ../urpm/parallel_ka_run.pm:127
-#: ../urpm/parallel_ka_run.pm:221
-msgid "mput failed, maybe a node is unreacheable"
-msgstr "mput 失敗，可能無法連接至該節點"
-
-#: ../urpm/parallel_ka_run.pm:69
-#, c-format
-msgid "node %s has an old version of urpme, please upgrade"
-msgstr "節點 %s 使用的是舊版的 urpme，請升級"
-
-#: ../urpm/parallel_ka_run.pm:93 ../urpm/parallel_ka_run.pm:206
-#: ../urpm/parallel_ka_run.pm:236
-msgid "rshp failed, maybe a node is unreacheable"
-msgstr "rshp 失敗，可能無法連接至該節點"
-
-#: ../urpm/parallel_ka_run.pm:103 ../urpm/parallel_ssh.pm:108
-#, c-format
-msgid "on node %s"
-msgstr "在節點 %s"
-
-#. - first propagate the synthesis file to all machine.
-#: ../urpm/parallel_ka_run.pm:125
-msgid "Propagating synthesis to nodes..."
-msgstr "正在將綜合文件同步到節點..."
-
-#. - now try an iteration of urpmq.
-#: ../urpm/parallel_ka_run.pm:176
-msgid "Resolving dependencies on nodes..."
-msgstr "正在處理節點的相依性"
-
-#: ../urpm/parallel_ka_run.pm:219
-msgid "Distributing files to nodes..."
-msgstr "正在將檔案發佈到節點..."
-
-#: ../urpm/parallel_ka_run.pm:226
-msgid "Verifying if install is possible on nodes..."
-msgstr "正在驗證是否可在節點上進行安裝..."
-
-#: ../urpm/parallel_ka_run.pm:240 ../urpm/parallel_ssh.pm:255
-#, c-format
-msgid "Installation failed on node %s"
-msgstr "節點 %s 安裝失敗"
-
-#. - Warning : the following message is parsed in urpm::parallel_*
-#: ../urpm/parallel_ka_run.pm:245 ../urpm/parallel_ssh.pm:260 ../urpmi:819
-msgid "Installation is possible"
-msgstr "可以安裝"
-
-#. - continue installation.
-#: ../urpm/parallel_ka_run.pm:250
-msgid "Installing packages on nodes..."
-msgstr "正在由節點安裝套件..."
-
-#: ../urpm/parallel_ssh.pm:33 ../urpm/parallel_ssh.pm:132
-#: ../urpm/parallel_ssh.pm:236
-#, c-format
-msgid "scp failed on host %s (%d)"
-msgstr "主機 %s scp 失敗 (%d)"
-
-#: ../urpm/parallel_ssh.pm:130
-#, c-format
-msgid "Propagating synthesis to %s..."
-msgstr "正在將綜合文件傳送到 %s..."
-
-#: ../urpm/parallel_ssh.pm:183
-#, c-format
-msgid "Resolving dependencies on %s..."
-msgstr "正在解决 %s 上的相依性..."
-
-#: ../urpm/parallel_ssh.pm:213
-#, c-format
-msgid "host %s does not have a good version of urpmi (%d)"
-msgstr "主機 %s 上的 urpmi 版本並不正確 (%d)"
-
-#: ../urpm/parallel_ssh.pm:229
-#, c-format
-msgid "Distributing files to %s..."
-msgstr "正在發佈檔案到 %s"
-
-#: ../urpm/parallel_ssh.pm:243
-#, c-format
-msgid "Verifying if install is possible on %s..."
-msgstr "正在驗證使不可以在 %s 上進行安裝..."
-
-#: ../urpm/parallel_ssh.pm:267
-#, c-format
-msgid "Performing install on %s..."
-msgstr "正在 %s 上進行安装..."
-
-#: ../urpm/parallel_ssh.pm:281
-#, c-format
-msgid "Installing %s on %s..."
-msgstr "正在 %2$s 上安装 %1$s..."
-
-#: ../urpm/parallel_ssh.pm:282
-#, c-format
-msgid "Preparing install on %s..."
-msgstr "正在準備安裝到 %s 上..."
-
 #: ../urpme:39
 #, c-format
 msgid ""
@@ -515,41 +454,56 @@ msgstr ""
 "\n"
 "用法：\n"
 
-#: ../urpme:44 ../urpmf:35 ../urpmi:88 ../urpmi.addmedia:45
-#: ../urpmi.recover:33 ../urpmi.removemedia:54 ../urpmi.update:32 ../urpmq:47
+#: ../urpme:44 ../urpmf:35 ../urpmi:84 ../urpmi.addmedia:45
+#: ../urpmi.recover:33 ../urpmi.removemedia:40 ../urpmi.update:32 ../urpmq:47
+#, c-format
 msgid "  --help         - print this help message.\n"
 msgstr "  --help         - 顯示此說明訊息。\n"
 
 #: ../urpme:45
+#, c-format
 msgid "  --auto         - automatically select a package in choices.\n"
 msgstr "  --auto         - 自動選擇套件。\n"
 
 #: ../urpme:46
+#, c-format
 msgid "  --test         - verify if the removal can be achieved correctly.\n"
 msgstr "  --test         - 確認刪除是否能夠正確進行。\n"
 
-#: ../urpme:47 ../urpmi:110 ../urpmq:66
+#: ../urpme:47 ../urpmi:109 ../urpmq:66
+#, c-format
 msgid ""
 "  --force        - force invocation even if some packages do not exist.\n"
 msgstr "  --force        - 即使某些套件不存在仍然強制執行。\n"
 
-#: ../urpme:48 ../urpmi:115 ../urpmq:68
+#: ../urpme:48 ../urpmi:114 ../urpmq:68
+#, c-format
 msgid "  --parallel     - distributed urpmi across machines of alias.\n"
 msgstr "  --parallel     - 在同步管理的機器上分散式的執行 urpmi。\n"
 
-#: ../urpme:49 ../urpmi:148
+#: ../urpme:49 ../urpmi:146
+#, c-format
 msgid "  --repackage    - Re-package the files before erasing\n"
 msgstr "  --repackage    - 在移除前重新打包檔案\n"
 
 #: ../urpme:50
+#, c-format
 msgid "  --root         - use another root for rpm removal.\n"
 msgstr "  --root         - 使用另一個根目錄移除 rpm 套件。\n"
 
-#: ../urpme:51
+#: ../urpme:51 ../urpmf:40 ../urpmi:116 ../urpmi.addmedia:60
+#: ../urpmi.recover:36 ../urpmi.removemedia:46 ../urpmi.update:46 ../urpmq:70
+#, fuzzy, c-format
+msgid "  --urpmi-root   - use another root for urpmi db & rpm installation.\n"
+msgstr "  --root         - 使用另一個根目錄進行 RPM 套件的安裝。\n"
+
+#: ../urpme:52
+#, c-format
 msgid "  --noscripts    - do not execute package scriptlet(s).\n"
 msgstr "  --noscripts    - 不執行套件中的命令稿。\n"
 
-#: ../urpme:52
+#: ../urpme:53
+#, c-format
 msgid ""
 "  --use-distrib  - configure urpme on the fly from a distrib tree, useful\n"
 "                   to (un)install a chroot with --root option.\n"
@@ -557,76 +511,79 @@ msgstr ""
 "  --use-distrib  - 立即由一個散佈套件樹設定 urpme，在搭配 --root 選項來安\n"
 "                   裝/移除一個 chroot 時很方便。\n"
 
-#: ../urpme:54 ../urpmi:119 ../urpmq:71
-#, fuzzy
+#: ../urpme:55 ../urpmi:119 ../urpmq:73
+#, fuzzy, c-format
 msgid "    --probe-synthesis - use synthesis file.\n"
 msgstr "  --probe-synthesis - 嘗試尋找並使用 synthesis 檔案。\n"
 
-#: ../urpme:55 ../urpmi:120 ../urpmq:72
-#, fuzzy
+#: ../urpme:56 ../urpmi:120 ../urpmq:74
+#, fuzzy, c-format
 msgid "    --probe-hdlist - use hdlist file.\n"
 msgstr "  --probe-hdlist - 嘗試尋找並使用 hdlist 檔案。\n"
 
-#: ../urpme:56 ../urpmi:158 ../urpmi.addmedia:73 ../urpmi.removemedia:59
-#: ../urpmi.update:50 ../urpmq:97
-msgid "  -v             - verbose mode.\n"
-msgstr "  -v             - 完整訊息模式。\n"
+#: ../urpme:57 ../urpmi:156 ../urpmq:85
+#, fuzzy, c-format
+msgid "  --verbose, -v  - verbose mode.\n"
+msgstr "  --verbose      - 完整訊息模式。\n"
 
-#: ../urpme:57
+#: ../urpme:58
+#, c-format
 msgid "  -a             - select all packages matching expression.\n"
 msgstr "  -a             - 選擇所有符合描述的套件。\n"
 
-#: ../urpme:74
+#: ../urpme:75
+#, c-format
 msgid "Only superuser is allowed to remove packages"
 msgstr "只有擁有管理者權限的使用者才能移除套件"
 
 #: ../urpme:106
-msgid "unknown package"
+#, c-format
+msgid "unknown packages"
 msgstr "未知的套件"
 
-#. - Warning : the following message is parsed in urpm::parallel_*
 #: ../urpme:106
-msgid "unknown packages"
+#, c-format
+msgid "unknown package"
 msgstr "未知的套件"
 
-#. - Warning : the following message is parsed in urpm::parallel_*
 #: ../urpme:112
 #, c-format
 msgid "The following packages contain %s: %s"
 msgstr "以下套件包含 %s：%s"
 
-#. - Warning : the following message is parsed in urpm::parallel_*
-#: ../urpme:118 ../urpmi:522
+#: ../urpme:118 ../urpmi:526
 #, c-format
 msgid "removing package %s will break your system"
 msgstr "移除套件 %s 將破壞您的系統"
 
-#: ../urpme:121
+#: ../urpme:120
+#, c-format
 msgid "Nothing to remove"
 msgstr "沒有東西可移除"
 
-#. - Warning : the following message is parsed in urpm::parallel_*
-#: ../urpme:126
+#: ../urpme:125
+#, c-format
 msgid "Checking to remove the following packages"
 msgstr "正在檢查以移除下列套件"
 
-#: ../urpme:133
+#: ../urpme:132
 #, c-format
 msgid ""
 "To satisfy dependencies, the following %d packages will be removed (%d MB)"
 msgstr "為了滿足相依性，下列 %d 個套件將被移除 (%d MB)"
 
-#: ../urpme:135 ../urpmi:543 ../urpmi:669 ../urpmi.addmedia:136
-msgid " (y/N) "
-msgstr " (y/N) (是/否) "
-
-#: ../urpme:135
+#: ../urpme:134
 #, c-format
 msgid "Remove %d packages?"
 msgstr "要移除這 %d 個套件嗎？"
 
-#. - Warning : the following message is parsed in urpm::parallel_*
-#: ../urpme:157
+#: ../urpme:134 ../urpmi:550 ../urpmi:676 ../urpmi.addmedia:137
+#, c-format
+msgid " (y/N) "
+msgstr " (y/N) (是/否) "
+
+#: ../urpme:156
+#, c-format
 msgid "Removal failed"
 msgstr "移除失敗"
 
@@ -647,215 +604,263 @@ msgstr ""
 "用法：urpmf [選項] pattern-expression\n"
 
 #: ../urpmf:36
+#, c-format
 msgid "  --version      - print this tool's version number.\n"
 msgstr "  --version      - 印出這個工具的版本編號。\n"
 
-#: ../urpmf:37 ../urpmi:137 ../urpmq:80
+#: ../urpmf:37 ../urpmi:137 ../urpmq:82
+#, c-format
 msgid "  --env          - use specific environment (typically a bug report).\n"
 msgstr "  --env          - 使用特定環境 (一般用於臭蟲回報)。\n"
 
-#: ../urpmf:38 ../urpmi:90 ../urpmq:51
+#: ../urpmf:38 ../urpmi:86 ../urpmq:51
+#, c-format
 msgid "  --excludemedia - do not use the given media, separated by comma.\n"
 msgstr "  --excludemedia - 不使用給定的媒體，不同媒體間請以逗號分隔。\n"
 
 #: ../urpmf:39
+#, c-format
 msgid ""
 "  --literal, -l  - don't match patterns, use argument as a literal string.\n"
 msgstr "  --literal, -l  - 不比對樣版，把參數當作一般字串。\n"
 
-#: ../urpmf:40 ../urpmi:89 ../urpmq:49
+#: ../urpmf:41 ../urpmi:85 ../urpmq:49
+#, c-format
 msgid "  --media        - use only the given media, separated by comma.\n"
 msgstr "  --media        - 只使用給定的媒體，不同媒體間請以逗號分隔。\n"
 
-#: ../urpmf:41 ../urpmi:93 ../urpmq:52
+#: ../urpmf:42 ../urpmi:89 ../urpmq:52
+#, c-format
 msgid ""
 "  --sortmedia    - sort media according to substrings separated by comma.\n"
 msgstr "  --sortmedia    - 依據子字串排序媒體，以逗號分開。\n"
 
-#: ../urpmf:42 ../urpmi:94 ../urpmq:53
+#: ../urpmf:43 ../urpmi:90 ../urpmq:53
+#, c-format
 msgid "  --synthesis    - use the given synthesis instead of urpmi db.\n"
 msgstr "  --synthesis    - 使用指定的 synthesis 檔而非 urpmi 資料庫。\n"
 
-#: ../urpmf:43
+#: ../urpmf:44
+#, c-format
 msgid "  --uniq         - do not print identical lines twice.\n"
 msgstr "  --uniq         - 不顯示相同的訊息。\n"
 
-#: ../urpmf:44 ../urpmi:91 ../urpmq:48
+#: ../urpmf:45 ../urpmi:87 ../urpmq:48
+#, c-format
 msgid "  --update       - use only update media.\n"
 msgstr "  --update       - 只使用更新媒體。\n"
 
-#: ../urpmf:45
+#: ../urpmf:46
+#, c-format
 msgid "  --verbose      - verbose mode.\n"
 msgstr "  --verbose      - 完整訊息模式。\n"
 
-#: ../urpmf:46
+#: ../urpmf:47
+#, c-format
 msgid "  -i             - ignore case distinctions in patterns.\n"
 msgstr "  -i             - 忽略樣版中的大小寫差異。\n"
 
-#: ../urpmf:47
+#: ../urpmf:48
+#, c-format
 msgid "  -I             - honor case distinctions in patterns (default).\n"
 msgstr "  -I             - 分辨樣版中的大小寫差異 (預設值)。\n"
 
-#: ../urpmf:48
+#: ../urpmf:49
+#, c-format
 msgid "  -F<str>        - change field separator (defaults to ':').\n"
 msgstr "  -F<字串>       - 更改字串分隔符號 (預設為“:”)。\n"
 
-#: ../urpmf:49
+#: ../urpmf:50
+#, c-format
 msgid "Pattern expressions:\n"
 msgstr "樣版表示式：\n"
 
-#: ../urpmf:50
+#: ../urpmf:51
+#, c-format
 msgid "  text           - any text is parsed as a regexp, unless -l is used.\n"
 msgstr "  文字           - 任何文字都將被分析為正規表示式，除非使用了 -l。\n"
 
-#: ../urpmf:51
+#: ../urpmf:52
+#, c-format
 msgid "  -e             - include perl code directly as perl -e.\n"
 msgstr "  -e             - 直接包含 perl 原始碼，類似 perl -e。\n"
 
-#: ../urpmf:52
+#: ../urpmf:53
+#, c-format
 msgid "  -a             - binary AND operator.\n"
 msgstr "  -a             - 二元 AND 運算子。\n"
 
-#: ../urpmf:53
+#: ../urpmf:54
+#, c-format
 msgid "  -o             - binary OR operator.\n"
 msgstr "  -o             - 二元 OR 運算子。\n"
 
-#: ../urpmf:54
+#: ../urpmf:55
+#, c-format
 msgid "  !              - unary NOT.\n"
 msgstr "  !              - 一元 NOT 運算子。\n"
 
-#: ../urpmf:55
+#: ../urpmf:56
+#, c-format
 msgid "  ( )            - left and right parentheses.\n"
 msgstr "  ( )            - 左右括弧。\n"
 
-#: ../urpmf:56
+#: ../urpmf:57
+#, c-format
 msgid "List of tags:\n"
 msgstr "標籤清單：\n"
 
-#: ../urpmf:57
+#: ../urpmf:58
+#, c-format
 msgid "  --qf           - specify a printf-like output format\n"
 msgstr "  --qf           - 使用類似 printf 的輸出格式\n"
 
-#: ../urpmf:58
+#: ../urpmf:59
 #, c-format
 msgid "                   example: '%%name:%%files'\n"
 msgstr "                   範例：'%%name:%%files'\n"
 
-#: ../urpmf:59
+#: ../urpmf:60
+#, c-format
 msgid "  --arch         - architecture\n"
 msgstr "  --arch         - 硬體架構\n"
 
-#: ../urpmf:60
+#: ../urpmf:61
+#, c-format
 msgid "  --buildhost    - build host\n"
 msgstr "  --buildhost    - 建立主機\n"
 
-#: ../urpmf:61
+#: ../urpmf:62
+#, c-format
 msgid "  --buildtime    - build time\n"
 msgstr "  --buildtime    - 建立時間\n"
 
-#: ../urpmf:62
+#: ../urpmf:63
+#, c-format
 msgid "  --conffiles    - configuration files\n"
 msgstr "  --conffiles    - 組態檔\n"
 
-#: ../urpmf:63
+#: ../urpmf:64
+#, c-format
 msgid "  --conflicts    - conflict tags\n"
 msgstr "  --conflicts    - 衝突標籤\n"
 
-#: ../urpmf:64
+#: ../urpmf:65
+#, c-format
 msgid "  --description  - package description\n"
 msgstr "  --description   - 套件描述\n"
 
-#: ../urpmf:65
+#: ../urpmf:66
+#, c-format
 msgid "  --distribution - distribution\n"
 msgstr "  --distribution - 發行版\n"
 
-#: ../urpmf:66
+#: ../urpmf:67
+#, c-format
 msgid "  --epoch        - epoch\n"
 msgstr "  --epoch        - 時期\n"
 
-#: ../urpmf:67
+#: ../urpmf:68
+#, c-format
 msgid "  --filename     - filename of the package\n"
 msgstr "  --filename     - 套件檔案名稱\n"
 
-#: ../urpmf:68
+#: ../urpmf:69
+#, c-format
 msgid "  --files        - list of files contained in the package\n"
 msgstr "  --files        - 列出套件內包含的檔案\n"
 
-#: ../urpmf:69
+#: ../urpmf:70
+#, c-format
 msgid "  --group        - group\n"
 msgstr "  --group        - 群組\n"
 
-#: ../urpmf:70
+#: ../urpmf:71
+#, c-format
 msgid "  --name         - package name\n"
 msgstr "  --name         - 套件名稱\n"
 
-#: ../urpmf:71
+#: ../urpmf:72
+#, c-format
 msgid "  --obsoletes    - obsoletes tags\n"
 msgstr ""
 "  --obsoletes    - 淘汰標籤\n"
 "\n"
 
-#: ../urpmf:72
+#: ../urpmf:73
+#, c-format
 msgid "  --packager     - packager\n"
 msgstr "  --packager     - 打包者\n"
 
-#: ../urpmf:73
+#: ../urpmf:74
+#, c-format
 msgid "  --provides     - provides tags\n"
 msgstr "  --provides     - 提供標籤\n"
 
-#: ../urpmf:74
+#: ../urpmf:75
+#, c-format
 msgid "  --requires     - requires tags\n"
 msgstr "  --requires     - 需要標籤\n"
 
-#: ../urpmf:75
+#: ../urpmf:76
+#, c-format
 msgid "  --size         - installed size\n"
 msgstr "  --size         - 安裝大小\n"
 
-#: ../urpmf:76
+#: ../urpmf:77
+#, c-format
 msgid "  --sourcerpm    - source rpm name\n"
 msgstr "  --sourcerpm    - 原始碼套件名稱\n"
 
-#: ../urpmf:77
+#: ../urpmf:78
+#, c-format
 msgid "  --summary      - summary\n"
 msgstr "  --summary      - 摘要\n"
 
-#: ../urpmf:78
+#: ../urpmf:79
+#, c-format
 msgid "  --url          - url\n"
 msgstr "  --url          - URL\n"
 
-#: ../urpmf:79
+#: ../urpmf:80
+#, c-format
 msgid "  --vendor       - vendor\n"
 msgstr "  --vendor       - 提供者\n"
 
-#: ../urpmf:80
+#: ../urpmf:81
+#, c-format
 msgid "  -m             - the media in which the package was found\n"
 msgstr "  -m             - 這個套件被找到的媒介\n"
 
-#: ../urpmf:81 ../urpmq:86
+#: ../urpmf:82 ../urpmq:89
+#, c-format
 msgid "  -f             - print version, release and arch with name.\n"
 msgstr "  -f             - 顯示版本、發行編號與平台。\n"
 
-#: ../urpmf:136
+#: ../urpmf:137
+#, c-format
 msgid "Incorrect format: you may use only one multi-valued tag"
 msgstr "格式錯誤：您只能使用一個多值標籤"
 
-#: ../urpmf:185 ../urpmi:256 ../urpmq:132
+#: ../urpmf:186 ../urpmi:254 ../urpmq:134
 #, c-format
 msgid "using specific environment on %s\n"
 msgstr "正在 %s 上使用特定的環境\n"
 
-#: ../urpmf:225
+#: ../urpmf:226
+#, c-format
 msgid ""
 "Note: since no media searched uses hdlists, urpmf was unable to return any "
 "result\n"
 msgstr ""
 "注意：因為所有搜尋過的媒體都沒有使用 hdlists，所以 urpmf 無法回傳任何結果\n"
 
-#: ../urpmf:226
+#: ../urpmf:227
+#, c-format
 msgid "You may want to use --name to search for package names.\n"
 msgstr "您或許想要使用 --name 參數來搜尋套件名稱。\n"
 
-#: ../urpmi:83
+#: ../urpmi:79
 #, c-format
 msgid ""
 "urpmi version %s\n"
@@ -871,33 +876,54 @@ msgstr ""
 "\n"
 "用法：\n"
 
-#: ../urpmi:92
+#: ../urpmi:88
+#, c-format
 msgid ""
 "  --searchmedia  - use only the given media to search requested packages.\n"
 msgstr "  --searchmedia  - 只使用指定的媒體來搜尋需要的套件。\n"
 
-#: ../urpmi:95
+#: ../urpmi:91
+#, c-format
 msgid ""
 "  --auto         - non-interactive mode, assume default answers to "
 "questions.\n"
 msgstr "  --auto         - 非互動式模式，對問題使用預設的回答。\n"
 
-#: ../urpmi:96 ../urpmq:54
+#: ../urpmi:92 ../urpmq:54
+#, c-format
 msgid ""
 "  --auto-select  - automatically select packages to upgrade the system.\n"
 msgstr "  --auto-select  - 自動選擇要用來升級系統的套件。\n"
 
-#: ../urpmi:97
+#: ../urpmi:93
+#, fuzzy, c-format
+msgid "  --auto-update  - update media then upgrade the system.\n"
+msgstr "  --auto-select  - 自動選擇要用來升級系統的套件。\n"
+
+#: ../urpmi:94
+#, fuzzy, c-format
+msgid "    --no-md5sum    - disable MD5SUM file checking.\n"
+msgstr "  --no-md5sum    - 不使用 MD5SUM 檔案檢查功能。\n"
+
+#: ../urpmi:95
+#, fuzzy, c-format
+msgid "    --force-key    - force update of gpg key.\n"
+msgstr "  --force-key    - 強制更新 gpg 鑰匙。\n"
+
+#: ../urpmi:96
+#, c-format
 msgid ""
 "  --no-uninstall - never ask to uninstall a package, abort the "
 "installation.\n"
 msgstr "  --no-uninstall - 絕不要求移除套件，直接中斷安裝。\n"
 
-#: ../urpmi:98
+#: ../urpmi:97
+#, c-format
 msgid "  --no-install   - don't install packages (only download)\n"
 msgstr "  --no-install   - 不安裝套件 (只下載)。\n"
 
-#: ../urpmi:99 ../urpmq:56
+#: ../urpmi:98 ../urpmq:56
+#, c-format
 msgid ""
 "  --keep         - keep existing packages if possible, reject requested\n"
 "                   packages that lead to removals.\n"
@@ -905,7 +931,7 @@ msgstr ""
 "  --keep         - 盡可能的保留現存的套件，拒絕安裝會導致移除其他套件的\n"
 "                   套件。\n"
 
-#: ../urpmi:101
+#: ../urpmi:100
 #, c-format
 msgid ""
 "  --split-level  - split in small transaction if more than given packages\n"
@@ -916,38 +942,45 @@ msgstr ""
 "                   分割為幾個小的安裝程序。\n"
 "                   預設值為 %d。\n"
 
-#: ../urpmi:104
+#: ../urpmi:103
 #, c-format
 msgid "  --split-length - small transaction length, default is %d.\n"
 msgstr "  --split-length - 小型安裝程序大小，預設值為 %d。\n"
 
-#: ../urpmi:105
+#: ../urpmi:104
+#, c-format
 msgid "  --fuzzy, -y    - impose fuzzy search.\n"
 msgstr "  --fuzzy, -y    - 加上模糊搜尋。\n"
 
-#: ../urpmi:106
+#: ../urpmi:105
+#, c-format
 msgid "  --src, -s      - next package is a source package.\n"
 msgstr "  --src, -s      - 下個套件是原始碼套件。\n"
 
-#: ../urpmi:107
+#: ../urpmi:106
+#, c-format
 msgid "  --install-src  - install only source package (no binaries).\n"
 msgstr "  --install-src  - 只安裝原始碼套件 (不安裝二進位檔)。\n"
 
-#: ../urpmi:108
+#: ../urpmi:107
+#, c-format
 msgid "  --clean        - remove rpm from cache before anything else.\n"
 msgstr "  --clean        - 在執行任何事前先由快取中移除 RPM 檔案。\n"
 
-#: ../urpmi:109
+#: ../urpmi:108
+#, c-format
 msgid "  --noclean      - don't clean rpms from cache.\n"
 msgstr "  --noclean      - 不清除快取中的 RPM 檔案。\n"
 
-#: ../urpmi:111
+#: ../urpmi:110
+#, c-format
 msgid ""
 "  --allow-nodeps - allow asking user to install packages without\n"
 "                   dependencies checking.\n"
 msgstr "  --allow-nodeps - 允許要求使用者不檢查相依性就安裝套件。\n"
 
-#: ../urpmi:113
+#: ../urpmi:112
+#, c-format
 msgid ""
 "  --allow-force  - allow asking user to install packages without\n"
 "                   dependencies checking and integrity.\n"
@@ -955,11 +988,13 @@ msgstr ""
 "  --allow-force  - 允許要求使用者安裝套件而不檢查相依性與完整\n"
 "                   性。\n"
 
-#: ../urpmi:116
+#: ../urpmi:115 ../urpmq:69
+#, c-format
 msgid "  --root         - use another root for rpm installation.\n"
 msgstr "  --root         - 使用另一個根目錄進行 RPM 套件的安裝。\n"
 
 #: ../urpmi:117
+#, c-format
 msgid ""
 "  --use-distrib  - configure urpmi on the fly from a distrib tree, useful\n"
 "                   to install a chroot with --root option.\n"
@@ -967,41 +1002,48 @@ msgstr ""
 "  --use-distrib  - 立即由一個散佈套件樹設定 urpmi，在搭配 --root 選項來安\n"
 "                   裝/移除一個 chroot 時很方便。\n"
 
-#: ../urpmi:121 ../urpmi.addmedia:46 ../urpmi.update:33 ../urpmq:73
+#: ../urpmi:121 ../urpmi.addmedia:46 ../urpmi.update:33 ../urpmq:75
+#, c-format
 msgid "  --wget         - use wget to retrieve distant files.\n"
 msgstr "  --wget         - 使用 wget 擷取遠端檔案。\n"
 
-#: ../urpmi:122 ../urpmi.addmedia:47 ../urpmi.update:34 ../urpmq:74
+#: ../urpmi:122 ../urpmi.addmedia:47 ../urpmi.update:34 ../urpmq:76
+#, c-format
 msgid "  --curl         - use curl to retrieve distant files.\n"
 msgstr "  --curl         - 使用 curl 擷取遠端檔案。\n"
 
-#: ../urpmi:123 ../urpmi.addmedia:48 ../urpmi.update:35 ../urpmq:75
-#, fuzzy
+#: ../urpmi:123 ../urpmi.addmedia:48 ../urpmi.update:35 ../urpmq:77
+#, fuzzy, c-format
 msgid "  --prozilla     - use prozilla to retrieve distant files.\n"
 msgstr "  --curl         - 使用 curl 擷取遠端檔案。\n"
 
 #: ../urpmi:124
+#, c-format
 msgid "  --curl-options - additional options to pass to curl\n"
 msgstr " --curl-options - 要額外傳給 curl 的參數\n"
 
 #: ../urpmi:125
+#, c-format
 msgid "  --rsync-options- additional options to pass to rsync\n"
 msgstr "  --rsync-options- 要額外傳給 rsync 的參數\n"
 
 #: ../urpmi:126
+#, c-format
 msgid "  --wget-options - additional options to pass to wget\n"
 msgstr "  --wget-options - 要額外傳給 wget 的參數\n"
 
 #: ../urpmi:127
-#, fuzzy
+#, fuzzy, c-format
 msgid "  --prozilla-options - additional options to pass to prozilla\n"
 msgstr " --curl-options - 要額外傳給 curl 的參數\n"
 
 #: ../urpmi:128 ../urpmi.addmedia:49 ../urpmi.update:36
+#, c-format
 msgid "  --limit-rate   - limit the download speed.\n"
 msgstr "  --limit-rate   - 限制下載的速度。\n"
 
 #: ../urpmi:129
+#, c-format
 msgid ""
 "  --resume       - resume transfer of partially-downloaded files\n"
 "                   (--no-resume disables it, default is disabled).\n"
@@ -1009,7 +1051,8 @@ msgstr ""
 "  --resume       - 接著傳送下載到一半的檔案\n"
 "                   (--no-resume 選項停用它，預設值為停用)。\n"
 
-#: ../urpmi:131 ../urpmi.addmedia:50 ../urpmi.update:37 ../urpmq:76
+#: ../urpmi:131 ../urpmi.addmedia:50 ../urpmi.update:37 ../urpmq:78
+#, c-format
 msgid ""
 "  --proxy        - use specified HTTP proxy, the port number is assumed\n"
 "                   to be 1080 by default (format is <proxyhost[:port]>).\n"
@@ -1017,7 +1060,8 @@ msgstr ""
 "  --proxy        - 使用指定的 HTTP 代理伺服器，通訊埠假設為預設值 1080 \n"
 "                   (格式為 <proxyhost[:port]>)。\n"
 
-#: ../urpmi:133 ../urpmi.addmedia:52 ../urpmi.update:39 ../urpmq:78
+#: ../urpmi:133 ../urpmi.addmedia:52 ../urpmi.update:39 ../urpmq:80
+#, c-format
 msgid ""
 "  --proxy-user   - specify user and password to use for proxy\n"
 "                   authentication (format is <user:password>).\n"
@@ -1026,12 +1070,14 @@ msgstr ""
 "                   (格式為 <user:password>)。\n"
 
 #: ../urpmi:135
+#, c-format
 msgid ""
 "  --bug          - output a bug report in directory indicated by\n"
 "                   next arg.\n"
 msgstr "  --bug          - 輸出臭蟲回報到下一個參數所指定的目錄。\n"
 
 #: ../urpmi:138
+#, c-format
 msgid ""
 "  --verify-rpm   - verify rpm signature before installation\n"
 "                   (--no-verify-rpm disables it, default is enabled).\n"
@@ -1040,115 +1086,125 @@ msgstr ""
 "                   (--no-verify-rpm 會停用它，預設值為啟用)。\n"
 
 #: ../urpmi:140
+#, c-format
 msgid ""
 "  --test         - only verify if the installation can be achieved "
 "correctly.\n"
 msgstr "  --test         - 僅確認安裝是否能夠正確完成。\n"
 
 #: ../urpmi:141
+#, c-format
 msgid "  --excludepath  - exclude path separated by comma.\n"
 msgstr "  --excludepath  - 排除以逗號分隔的路徑。\n"
 
 #: ../urpmi:142
+#, c-format
 msgid "  --excludedocs  - exclude doc files.\n"
 msgstr "  --excludedocs  - 排除說明文件檔案。\n"
 
 #: ../urpmi:143
+#, c-format
 msgid "  --ignoresize   - don't verify disk space before installation.\n"
 msgstr "  --ignoresize   - 安裝前不檢查剩餘的磁碟空間。\n"
 
 #: ../urpmi:144
+#, c-format
 msgid "  --ignorearch   - allow to install rpms for unmatched architectures.\n"
 msgstr "  --ignorearch   - 允許安裝硬體架構不相符的 RPM 檔。\n"
 
 #: ../urpmi:145
+#, c-format
 msgid "  --noscripts    - do not execute package scriptlet(s)\n"
 msgstr "  --noscripts    - 不執行套件中的命令稿。\n"
 
-#: ../urpmi:146 ../urpmi.addmedia:67 ../urpmi.update:42
-msgid "  --no-md5sum    - disable MD5SUM file checking.\n"
-msgstr "  --no-md5sum    - 不使用 MD5SUM 檔案檢查功能。\n"
-
-#: ../urpmi:147 ../urpmi.update:43
-msgid "  --force-key    - force update of gpg key.\n"
-msgstr "  --force-key    - 強制更新 gpg 鑰匙。\n"
-
-#: ../urpmi:149
+#: ../urpmi:147
+#, c-format
 msgid "  --skip         - packages which installation should be skipped\n"
 msgstr "  --skip         - 安裝時應該略過的套件。\n"
 
-#: ../urpmi:150
+#: ../urpmi:148
+#, c-format
 msgid ""
 "  --more-choices - when several packages are found, propose more choices\n"
 "                   than the default.\n"
 msgstr ""
 "  --more-choices - 當找到不只一個套件時，提供除了預設值之外的多個選擇。\n"
 
-#: ../urpmi:152
+#: ../urpmi:150
+#, c-format
 msgid "  --nolock       - don't lock rpm db.\n"
 msgstr "  --nolock       - 不鎖定 RPM 資料庫。\n"
 
-#: ../urpmi:153
+#: ../urpmi:151
+#, c-format
 msgid "  --strict-arch  - upgrade only packages with the same architecture.\n"
 msgstr "  --strict-arch  - 只升級相同平台的套件。\n"
 
-#: ../urpmi:154 ../urpmq:83
+#: ../urpmi:152 ../urpmq:86
+#, c-format
 msgid "  -a             - select all matches on command line.\n"
 msgstr "  -a             - 選擇命令列中所有符合的項目。\n"
 
-#: ../urpmi:155
+#: ../urpmi:153
+#, c-format
 msgid "  -p             - allow search in provides to find package.\n"
 msgstr "  -p             - 允許於 provides 中搜尋套件。\n"
 
-#: ../urpmi:156
+#: ../urpmi:154
+#, c-format
 msgid "  -P             - do not search in provides to find package.\n"
 msgstr "  -P             - 不在 provides 中搜尋套件。\n"
 
-#: ../urpmi:157 ../urpmi.addmedia:72 ../urpmi.removemedia:58
-#: ../urpmi.update:49
-msgid "  -q             - quiet mode.\n"
+#: ../urpmi:155
+#, fuzzy, c-format
+msgid "  --quiet, -q    - quiet mode.\n"
 msgstr "  -q             - 安靜模式。\n"
 
-#: ../urpmi:159
+#: ../urpmi:157
+#, c-format
 msgid "  names or rpm files given on command line will be installed.\n"
 msgstr "  將會安裝於命令列指定的名稱或 RPM 檔案。\n"
 
-#: ../urpmi:188
+#: ../urpmi:186
+#, c-format
 msgid "Error: can't use --auto-select along with package list.\n"
 msgstr ""
 
-#: ../urpmi:195
+#: ../urpmi:193
+#, c-format
 msgid ""
 "Error: To generate a bug report, specify the usual command-line arguments\n"
 "along with --bug.\n"
 msgstr "錯誤：要生成一個臭蟲回報，請指定平常的命令列參數另外再加上 --bug。\n"
 
-#: ../urpmi:222
+#: ../urpmi:220
+#, c-format
 msgid "You can't install binary rpm files when using --install-src"
 msgstr "當使用 --install-src 時您無法安裝二進制 RPM 檔案"
 
-#: ../urpmi:245
+#: ../urpmi:243
 #, c-format
 msgid ""
 "Directory [%s] already exists, please use another directory for bug report "
 "or delete it"
 msgstr "目錄 [%s] 已經存在，請指定另一個目錄給臭蟲回報或刪除它"
 
-#: ../urpmi:246
+#: ../urpmi:244
 #, c-format
 msgid "Unable to create directory [%s] for bug report"
 msgstr "無法建立 [%s] 目錄給臭蟲回報使用"
 
-#: ../urpmi:249
+#: ../urpmi:247
+#, c-format
 msgid "Copying failed"
 msgstr "複製失敗"
 
-#: ../urpmi:255
+#: ../urpmi:253
 #, c-format
 msgid "Environment directory %s does not exist"
 msgstr "環境目錄 %s 不存在"
 
-#: ../urpmi:273
+#: ../urpmi:271
 #, c-format
 msgid ""
 "Error: %s appears to be mounted read-only.\n"
@@ -1157,51 +1213,57 @@ msgstr ""
 "錯誤：%s 似乎被掛載為唯讀模式。\n"
 "使用 --allow-force 標籤來強制執行。"
 
-#. - For translators : there are several media here
 #: ../urpmi:364
+#, c-format
 msgid "Updating media...\n"
 msgstr "正在更新媒體...\n"
 
-#. -PO: here format is "<package_name>: <summary> (to upgrade)"
-#: ../urpmi:438
+#: ../urpmi:439
 #, fuzzy, c-format
 msgid "%s: %s (to upgrade)"
 msgstr " (升級用)"
 
 #. -PO: here format is "<package_name> (to upgrade)"
-#: ../urpmi:440
+#: ../urpmi:441
 #, fuzzy, c-format
 msgid "%s (to upgrade)"
 msgstr " (升級用)"
 
-#. -PO: here format is "<package_name>: <summary> (to install)"
-#: ../urpmi:442
+#: ../urpmi:443
 #, fuzzy, c-format
 msgid "%s: %s (to install)"
 msgstr " (安裝用)"
 
 #. -PO: here format is "<package_name> (to install)"
-#: ../urpmi:444
+#: ../urpmi:445
 #, fuzzy, c-format
 msgid "%s (to install)"
 msgstr " (安裝用)"
 
-#: ../urpmi:451
+#: ../urpmi:452
 #, c-format
 msgid "What is your choice? (1-%d) "
 msgstr "您要選擇何者？ (1-%d) "
 
-#: ../urpmi:481
-#, c-format
+#: ../urpmi:482
+#, fuzzy, c-format
 msgid ""
+"The following package cannot be installed because it depends on packages\n"
+"that are older than the installed ones:\n"
+"%s"
+msgid_plural ""
 "The following packages can't be installed because they depend on packages\n"
 "that are older than the installed ones:\n"
 "%s"
-msgstr ""
+msgstr[0] ""
+"下列套件無法安裝，因為它們需要比您系統上的套件為舊的版本：\n"
+"%s"
+msgstr[1] ""
 "下列套件無法安裝，因為它們需要比您系統上的套件為舊的版本：\n"
 "%s"
 
-#: ../urpmi:489 ../urpmi:507
+#: ../urpmi:492 ../urpmi:511
+#, c-format
 msgid ""
 "\n"
 "Continue installation anyway?"
@@ -1209,57 +1271,78 @@ msgstr ""
 "\n"
 "無論如何都要繼續安裝嗎？"
 
-#: ../urpmi:489 ../urpmi:507 ../urpmi:593 ../urpmi.addmedia:136
+#: ../urpmi:492 ../urpmi:511 ../urpmi:599 ../urpmi.addmedia:137
+#, c-format
 msgid " (Y/n) "
 msgstr " (Y/n) (是/否) "
 
-#: ../urpmi:500
-#, c-format
+#: ../urpmi:503
+#, fuzzy, c-format
 msgid ""
 "Some requested packages cannot be installed:\n"
 "%s"
-msgstr ""
+msgid_plural ""
+"Some requested packages cannot be installed:\n"
+"%s"
+msgstr[0] ""
+"某些要求的套件無法安裝：\n"
+"%s"
+msgstr[1] ""
 "某些要求的套件無法安裝：\n"
 "%s"
 
-#: ../urpmi:530
-#, c-format
+#: ../urpmi:534
+#, fuzzy, c-format
 msgid ""
+"The installation cannot continue because the following package\n"
+"has to be removed for others to be upgraded:\n"
+"%s\n"
+msgid_plural ""
 "The installation cannot continue because the following packages\n"
 "have to be removed for others to be upgraded:\n"
 "%s\n"
-msgstr ""
+msgstr[0] ""
+"安裝無法繼續，因為下列套件必須移除給其他套件來升級：\n"
+"%s\n"
+msgstr[1] ""
 "安裝無法繼續，因為下列套件必須移除給其他套件來升級：\n"
 "%s\n"
 
-#: ../urpmi:535
-#, c-format
+#: ../urpmi:541
+#, fuzzy, c-format
 msgid ""
+"The following package has to be removed for others to be upgraded:\n"
+"%s"
+msgid_plural ""
 "The following packages have to be removed for others to be upgraded:\n"
 "%s"
-msgstr ""
+msgstr[0] ""
+"下列套件必須移除給其他套件來升級：\n"
+"%s"
+msgstr[1] ""
 "下列套件必須移除給其他套件來升級：\n"
 "%s"
 
-#: ../urpmi:537
+#: ../urpmi:544
+#, c-format
 msgid "(test only, removal will not be actually done)"
 msgstr "(僅測試，移除動作並不會真的執行)"
 
-#: ../urpmi:572 ../urpmi:584
+#: ../urpmi:578 ../urpmi:589
+#, fuzzy, c-format
 msgid ""
 "To satisfy dependencies, the following packages are going to be installed"
-msgstr "為了滿足相依性，將一併安裝下列套件"
-
-#: ../urpmi:573 ../urpmi:585
-msgid "To satisfy dependencies, the following package is going to be installed"
-msgstr "為了滿足相依性，將一併安裝下列套件"
+msgid_plural ""
+"To satisfy dependencies, the following package is going to be installed"
+msgstr[0] "為了滿足相依性，將一併安裝下列套件"
+msgstr[1] "為了滿足相依性，將一併安裝下列套件"
 
-#: ../urpmi:574
+#: ../urpmi:580
 #, c-format
 msgid "(%d packages, %d MB)"
 msgstr "(%d 個套件，共 %d MB)"
 
-#: ../urpmi:580
+#: ../urpmi:586
 #, c-format
 msgid ""
 "You need to be root to install the following dependencies:\n"
@@ -1268,89 +1351,106 @@ msgstr ""
 "您必須具有管理者權限以安裝下列的相依性項目：\n"
 "%s\n"
 
-#: ../urpmi:587
+#: ../urpmi:592
+#, c-format
 msgid "(test only, installation will not be actually done)"
 msgstr "(僅測試，安裝動作並不會真的執行)"
 
-#: ../urpmi:589
-#, c-format
-msgid "Proceed with the installation of the %d packages? (%d MB)"
-msgstr "繼續安裝這 %d 個套件？(共 %d MB)"
+#: ../urpmi:594
+#, fuzzy, c-format
+msgid "Proceed with the installation of 1 package? (%2$d MB)"
+msgid_plural "Proceed with the installation of the %d packages? (%d MB)"
+msgstr[0] "繼續安裝這 %d 個套件？(共 %d MB)"
+msgstr[1] "繼續安裝這 %d 個套件？(共 %d MB)"
 
-#: ../urpmi:612
+#: ../urpmi:618
+#, c-format
 msgid "Press Enter when ready..."
 msgstr "準備好時請按 Enter..."
 
-#: ../urpmi:618
+#: ../urpmi:624
+#, c-format
 msgid "Cancel"
 msgstr "取消"
 
-#: ../urpmi:660
-msgid "The following packages have bad signatures"
-msgstr "下列套件有不正確的簽章"
+#: ../urpmi:666
+#, fuzzy, c-format
+msgid "The following package has bad signature"
+msgid_plural "The following packages have bad signatures"
+msgstr[0] "下列套件有不正確的簽章"
+msgstr[1] "下列套件有不正確的簽章"
 
-#: ../urpmi:661
+#: ../urpmi:668
+#, c-format
 msgid "Do you want to continue installation ?"
 msgstr "您要繼續安裝嗎？"
 
-#: ../urpmi:708
+#: ../urpmi:715
 #, c-format
 msgid "distributing %s"
 msgstr "正在發佈 %s"
 
-#. - there's a common prefix, simplify message
-#: ../urpmi:721
+#: ../urpmi:729
 #, c-format
 msgid "installing %s from %s"
 msgstr "正在由 %2$s 安裝 %1$s"
 
-#: ../urpmi:723
+#: ../urpmi:731
 #, c-format
 msgid "installing %s"
 msgstr "正在安裝 %s"
 
-#. - Warning : the following message is parsed in urpm::parallel_*
-#: ../urpmi:747
+#: ../urpmi:756
+#, c-format
 msgid "Installation failed:"
 msgstr "安裝失敗；"
 
-#: ../urpmi:754
+#: ../urpmi:763
+#, c-format
 msgid "Try installation without checking dependencies? (y/N) "
 msgstr "嘗試不檢查相依性直接安裝？ (y/N)(是/否)"
 
-#: ../urpmi:771
+#: ../urpmi:780
+#, c-format
 msgid "Try harder to install (--force)? (y/N) "
 msgstr "嘗試採用強制安裝的方式 (--force)？ (y/N)(是/否)"
 
-#: ../urpmi:810
+#: ../urpmi:819
 #, c-format
 msgid "%d installation transactions failed"
 msgstr "%d 個安裝程序失敗"
 
-#: ../urpmi:824
+#: ../urpmi:828
+#, c-format
+msgid "Installation is possible"
+msgstr "可以安裝"
+
+#: ../urpmi:833
+#, c-format
 msgid "Packages are up to date"
 msgstr ""
 
-#: ../urpmi:827
+#: ../urpmi:840
 #, fuzzy, c-format
-msgid "Packages %s are already installed"
-msgstr "每個套件都已經安裝了"
+msgid "Package %s is already installed"
+msgid_plural "Packages %s are already installed"
+msgstr[0] "每個套件都已經安裝了"
+msgstr[1] "每個套件都已經安裝了"
 
-#: ../urpmi:828
+#: ../urpmi:843
 #, fuzzy, c-format
-msgid "Package %s is already installed"
-msgstr "每個套件都已經安裝了"
+msgid "Package %s can not be installed"
+msgid_plural "Packages %s can not be installed"
+msgstr[0] "每個套件都已經安裝了"
+msgstr[1] "每個套件都已經安裝了"
 
-#: ../urpmi:847
+#: ../urpmi:863
+#, c-format
 msgid "restarting urpmi"
 msgstr "正在重新啟動 urpmi"
 
-#. Translator: The URI types strings 'file:', 'ftp:', 'http:',
-#. Translator: and 'removable:' must not be translated!
-#. Translator: neither the ``with''.
-#. Translator: only what is between <brackets> can be translated.
 #: ../urpmi.addmedia:36
-#, fuzzy
+#, fuzzy, c-format
 msgid ""
 "usage: urpmi.addmedia [options] <name> <url>\n"
 "where <url> is one of\n"
@@ -1374,38 +1474,48 @@ msgstr ""
 "而 [選項] 來自\n"
 
 #: ../urpmi.addmedia:54
+#, c-format
 msgid "  --update       - create an update medium.\n"
 msgstr "  --update       - 建立更新的媒體。\n"
 
 #: ../urpmi.addmedia:55
-msgid "  --probe-synthesis - try to find and use synthesis file.\n"
+#, fuzzy, c-format
+msgid "  --probe-synthesis - use synthesis file.\n"
 msgstr "  --probe-synthesis - 嘗試尋找並使用 synthesis 檔案。\n"
 
-#: ../urpmi.addmedia:56
-msgid "  --probe-hdlist - try to find and use hdlist file.\n"
+#: ../urpmi.addmedia:56 ../urpmi.addmedia:58
+#, fuzzy, c-format
+msgid "  --probe-hdlist - use hdlist file.\n"
 msgstr "  --probe-hdlist - 嘗試尋找並使用 hdlist 檔案。\n"
 
 #: ../urpmi.addmedia:57
-msgid ""
-"  --no-probe     - do not try to find any synthesis or\n"
-"                   hdlist file.\n"
-msgstr "  --no-probe     - 不尋找任何 synthesis 或 hdlist 檔案。\n"
+#, c-format
+msgid "  --probe-rpms   - use rpm files (instead of synthesis/hdlist).\n"
+msgstr ""
 
 #: ../urpmi.addmedia:59
+#, fuzzy, c-format
+msgid "  --no-probe     - do not try to find any synthesis or hdlist file.\n"
+msgstr "  --no-probe     - 不尋找任何 synthesis 或 hdlist 檔案。\n"
+
+#: ../urpmi.addmedia:61
+#, c-format
 msgid ""
 "  --distrib      - automatically create all media from an installation\n"
 "                   medium.\n"
 msgstr "  --distrib      - 自動根據安裝媒體建立所有的媒體。\n"
 
-#: ../urpmi.addmedia:61
+#: ../urpmi.addmedia:63
+#, c-format
 msgid "  --interactive  - with --distrib, ask confirmation for each media\n"
 msgstr "  --interactive  - 搭配 --distrib，每個媒體都要徵詢同意\n"
 
-#: ../urpmi.addmedia:62
+#: ../urpmi.addmedia:64
+#, c-format
 msgid "  --all-media    - with --distrib, add every listed media\n"
 msgstr "  --all-media    - 搭配 --distrib，加入所有列出的媒體\n"
 
-#: ../urpmi.addmedia:63
+#: ../urpmi.addmedia:65
 #, c-format
 msgid ""
 "  --from         - use specified url for list of mirrors, the default is\n"
@@ -1414,7 +1524,8 @@ msgstr ""
 "  --from         - 使用指定的 URL 取得映射站台清單，預設為\n"
 "                   %s\n"
 
-#: ../urpmi.addmedia:65
+#: ../urpmi.addmedia:67
+#, c-format
 msgid ""
 "  --virtual      - create virtual media wich are always up-to-date,\n"
 "                   only file:// protocol is allowed.\n"
@@ -1422,46 +1533,67 @@ msgstr ""
 "  --virtual      - 建立長保持於最新狀態的虛擬媒體，僅接受 file:// \n"
 "                   通訊協定。\n"
 
-#: ../urpmi.addmedia:68
+#: ../urpmi.addmedia:69 ../urpmi.update:42
+#, c-format
+msgid "  --no-md5sum    - disable MD5SUM file checking.\n"
+msgstr "  --no-md5sum    - 不使用 MD5SUM 檔案檢查功能。\n"
+
+#: ../urpmi.addmedia:70
+#, c-format
 msgid "  --nopubkey     - don't import pubkey of added media\n"
 msgstr "  --nopubkey     - 不匯入新增的媒體的公鑰\n"
 
-#: ../urpmi.addmedia:69
+#: ../urpmi.addmedia:71
+#, c-format
 msgid "  --raw          - add the media in config, but don't update it.\n"
 msgstr "  --raw          - 加入這個媒介到設定檔中，但不更新它。\n"
 
-#: ../urpmi.addmedia:70 ../urpmi.removemedia:56 ../urpmi.update:47
+#: ../urpmi.addmedia:72 ../urpmi.removemedia:42 ../urpmi.update:48
+#, c-format
 msgid "  -c             - clean headers cache directory.\n"
 msgstr "  -c             - 清除標頭快取目錄。\n"
 
-#: ../urpmi.addmedia:71 ../urpmi.update:48
-msgid "  -f             - force generation of hdlist files.\n"
-msgstr "  -f             - 強制產生 hdlist 檔案。\n"
+#: ../urpmi.addmedia:73 ../urpmi.removemedia:44 ../urpmi.update:50
+#, c-format
+msgid "  -q             - quiet mode.\n"
+msgstr "  -q             - 安靜模式。\n"
 
-#: ../urpmi.addmedia:85
+#: ../urpmi.addmedia:74 ../urpmi.removemedia:45 ../urpmi.update:51
+#, c-format
+msgid "  -v             - verbose mode.\n"
+msgstr "  -v             - 完整訊息模式。\n"
+
+#: ../urpmi.addmedia:86
 #, c-format
 msgid "unable to update medium \"%s\"\n"
 msgstr "無法更新媒體 \"%s\"\n"
 
-#: ../urpmi.addmedia:117
+#: ../urpmi.addmedia:115
+#, c-format
+msgid "bad <url> (for local directory, the path must be absolute)\n"
+msgstr ""
+
+#: ../urpmi.addmedia:118
+#, c-format
 msgid "Only superuser is allowed to add media"
 msgstr "只有管理者才能新增媒體"
 
-#: ../urpmi.addmedia:120
-#, c-format
-msgid "Will create config file [%s]"
+#: ../urpmi.addmedia:121
+#, fuzzy, c-format
+msgid "creating config file [%s]"
 msgstr "將建立設定檔 [%s]"
 
-#: ../urpmi.addmedia:121
+#: ../urpmi.addmedia:122
 #, c-format
 msgid "Can't create config file [%s]"
 msgstr "無法建立設定檔 [%s]"
 
-#: ../urpmi.addmedia:128
+#: ../urpmi.addmedia:129
+#, c-format
 msgid "no need to give <relative path of hdlist> with --distrib"
 msgstr "使用 --distrib 參數時不需給予 <hdlist 檔案的相對路徑>"
 
-#: ../urpmi.addmedia:136
+#: ../urpmi.addmedia:137
 #, c-format
 msgid ""
 "\n"
@@ -1470,16 +1602,17 @@ msgstr ""
 "\n"
 "您要加入媒體 '%s'"
 
-#: ../urpmi.addmedia:165
+#: ../urpmi.addmedia:166
+#, c-format
 msgid "<relative path of hdlist> missing\n"
 msgstr "<hdlist 檔案的相對路徑> 遺失\n"
 
-#: ../urpmi.addmedia:167
-msgid "`with' missing for network media\n"
-msgstr "使用網路媒體時遺漏了 `with'\n"
+#: ../urpmi.addmedia:169
+#, c-format
+msgid "Can't use %s with remote medium"
+msgstr ""
 
-#. - check creation of media
-#: ../urpmi.addmedia:188
+#: ../urpmi.addmedia:190
 #, c-format
 msgid "unable to create medium \"%s\"\n"
 msgstr "無法建立媒體 \"%s\"\n"
@@ -1501,144 +1634,153 @@ msgstr ""
 "用法：\n"
 
 #: ../urpmi.recover:34
+#, c-format
 msgid "  --checkpoint   - set repackaging start now\n"
 msgstr "  --checkpoint   - 設定現在開始重新打包\n"
 
 #: ../urpmi.recover:35
+#, c-format
 msgid "  --noclean      - don't clean repackage directory on checkpoint\n"
 msgstr "  --noclean      - 不清除檢查點的重新打包目錄。\n"
 
-#: ../urpmi.recover:36
+#: ../urpmi.recover:37
+#, c-format
 msgid ""
 "  --list         - list transactions since provided date/duration argument\n"
 msgstr "  --list         - 列出給定的日期至今或給定的期間內的交易\n"
 
-#: ../urpmi.recover:37
+#: ../urpmi.recover:38
+#, c-format
 msgid "  --list-all     - list all transactions in rpmdb (long)\n"
 msgstr "  --list-all     - 列出 rpmdb 中的所有交易 (long)\n"
 
-#: ../urpmi.recover:38
+#: ../urpmi.recover:39
+#, c-format
 msgid "  --list-safe    - list transactions since checkpoint\n"
 msgstr "  --list-safe    - 列出檢查點至今的交易\n"
 
-#: ../urpmi.recover:39
+#: ../urpmi.recover:40
+#, c-format
 msgid ""
 "  --rollback     - rollback until specified date,\n"
 "                   or rollback the specified number of transactions\n"
 msgstr "  --rollback     - 回復到特定的日期，或者回復特定的交易\n"
 
-#: ../urpmi.recover:41
+#: ../urpmi.recover:42
+#, c-format
 msgid "  --disable      - turn off repackaging\n"
 msgstr "  --disable      - 關閉重新打包\n"
 
-#: ../urpmi.recover:56
+#: ../urpmi.recover:57
 #, c-format
 msgid "Invalid date or duration [%s]\n"
 msgstr "錯誤的日期或期間 [%s]\n"
 
-#: ../urpmi.recover:64
+#: ../urpmi.recover:65
+#, c-format
 msgid "Repackage directory not defined\n"
 msgstr "沒有定義重新打包目錄\n"
 
-#: ../urpmi.recover:67
+#: ../urpmi.recover:68
 #, c-format
 msgid "Can't write to repackage directory [%s]\n"
 msgstr "無法寫入重新打包目錄 [%s]\n"
 
-#: ../urpmi.recover:69
+#: ../urpmi.recover:70
 #, c-format
 msgid "Cleaning up repackage directory [%s]...\n"
 msgstr "正在清除重新打包目錄 [%s]...\n"
 
-#: ../urpmi.recover:71
+#: ../urpmi.recover:72
 #, c-format
 msgid "%d files removed\n"
 msgstr "移除了 %d 個檔案\n"
 
-#: ../urpmi.recover:81
+#: ../urpmi.recover:82
 #, c-format
 msgid "Spurious command-line arguments [%s]\n"
 msgstr "不合理的命令列參數 [%s]\n"
 
-#: ../urpmi.recover:83
+#: ../urpmi.recover:84
+#, c-format
 msgid "You can't specify --checkpoint and --rollback at the same time\n"
 msgstr "您不能同時指定 --checkpoint 以及 --rollback\n"
 
-#: ../urpmi.recover:85
+#: ../urpmi.recover:86
+#, c-format
 msgid "You can't specify --checkpoint and --list at the same time\n"
 msgstr "您不能同時指定 --checkpoint 以及 --list\n"
 
-#: ../urpmi.recover:87
+#: ../urpmi.recover:88
+#, c-format
 msgid "You can't specify --rollback and --list at the same time\n"
 msgstr "您不能同時指定 --rollback 以及 --list\n"
 
-#: ../urpmi.recover:89
+#: ../urpmi.recover:90
+#, c-format
 msgid "You can't specify --disable along with another option"
 msgstr "您不能在指定 --disable 的同時加上其他任何選項"
 
-#: ../urpmi.recover:114
+#: ../urpmi.recover:115
 #, c-format
 msgid "No transaction found since %s\n"
 msgstr "從 %s 至今沒有找到任何交易\n"
 
-#. - check we're running as root
-#: ../urpmi.recover:129
+#: ../urpmi.recover:130
+#, c-format
 msgid "You must be superuser to do this"
 msgstr "您必須是超級使用者才能執行"
 
-#. - write rpm config file
-#: ../urpmi.recover:142 ../urpmi.recover:208
+#: ../urpmi.recover:143 ../urpmi.recover:209
 #, c-format
 msgid "Writing rpm macros file [%s]...\n"
 msgstr "正在寫入 rpm 巨集檔 [%s]...\n"
 
-#: ../urpmi.recover:184
+#: ../urpmi.recover:185
+#, c-format
 msgid "No rollback date found\n"
 msgstr "沒有找到回復日期\n"
 
-#: ../urpmi.recover:187
+#: ../urpmi.recover:188
 #, c-format
 msgid "Rollback until %s...\n"
 msgstr "回復到 %s...\n"
 
-#: ../urpmi.recover:194
+#: ../urpmi.recover:195
+#, c-format
 msgid "Disabling repackaging\n"
 msgstr "關閉重新打包\n"
 
-#: ../urpmi.removemedia:52
+#: ../urpmi.removemedia:38
+#, fuzzy, c-format
 msgid ""
-"usage: urpmi.removemedia [-a] <name> ...\n"
+"usage: urpmi.removemedia (-a | <name> ...)\n"
 "where <name> is a medium name to remove.\n"
 msgstr ""
 "用法：urpmi.removemedia [-a] <名稱> ...\n"
 "其中 <名稱> 是要移除的媒體名稱。\n"
 
-#: ../urpmi.removemedia:55
+#: ../urpmi.removemedia:41
+#, c-format
 msgid "  -a             - select all media.\n"
 msgstr "  -a             - 選擇全部的媒體。\n"
 
-#: ../urpmi.removemedia:57
+#: ../urpmi.removemedia:43
+#, c-format
 msgid "  -y             - fuzzy match on media names.\n"
 msgstr "  -y             - 對媒體名稱進行模糊比對。\n"
 
-#: ../urpmi.removemedia:60
+#: ../urpmi.removemedia:65
 #, c-format
-msgid ""
-"\n"
-"unknown options '%s'\n"
-msgstr ""
-"\n"
-"未知的選項 '%s'\n"
-
-#: ../urpmi.removemedia:70
 msgid "Only superuser is allowed to remove media"
 msgstr "只有管理者才可以移除媒體"
 
-#: ../urpmi.removemedia:81
+#: ../urpmi.removemedia:78
+#, c-format
 msgid "nothing to remove (use urpmi.addmedia to add a media)\n"
 msgstr "沒有東西可以移除 (使用 urpmi.addmedia 來新增一個媒體)\n"
 
-#: ../urpmi.removemedia:83
+#: ../urpmi.removemedia:84
 #, c-format
 msgid ""
 "the entry to remove is missing\n"
@@ -1648,6 +1790,7 @@ msgstr ""
 "(%s 的其中之一)\n"
 
 #: ../urpmi.update:30
+#, c-format
 msgid ""
 "usage: urpmi.update [options] <name> ...\n"
 "where <name> is a medium name to update.\n"
@@ -1656,30 +1799,46 @@ msgstr ""
 "其中 <名稱> 為要更新的媒體名稱。\n"
 
 #: ../urpmi.update:41
+#, c-format
 msgid "  --update       - update only update media.\n"
 msgstr "  --update       - 只更新更新的媒體。\n"
 
+#: ../urpmi.update:43
+#, c-format
+msgid "  --force-key    - force update of gpg key.\n"
+msgstr "  --force-key    - 強制更新 gpg 鑰匙。\n"
+
 #: ../urpmi.update:44
+#, c-format
 msgid "  --ignore       - don't update, mark the media as ignored.\n"
 msgstr "  --ignore       - 不更新，並標示此媒體為略過。\n"
 
 #: ../urpmi.update:45
+#, c-format
 msgid "  --no-ignore    - don't update, mark the media as enabled.\n"
 msgstr "  --no-ignore    - 不更新，並將此媒體標示為啟用。\n"
 
-#: ../urpmi.update:46
+#: ../urpmi.update:47
+#, c-format
 msgid "  -a             - select all non-removable media.\n"
 msgstr "  -a             - 選擇所有不可移除式媒體。\n"
 
-#: ../urpmi.update:69
+#: ../urpmi.update:49
+#, c-format
+msgid "  -f             - force generation of hdlist files.\n"
+msgstr "  -f             - 強制產生 hdlist 檔案。\n"
+
+#: ../urpmi.update:70
+#, c-format
 msgid "Only superuser is allowed to update media"
 msgstr "只有管理者才能跟新媒體"
 
-#: ../urpmi.update:77
+#: ../urpmi.update:78
+#, c-format
 msgid "nothing to update (use urpmi.addmedia to add a media)\n"
 msgstr "沒有東西可供更新 (使用 urpmi.addmedia 以新增一個媒體)\n"
 
-#: ../urpmi.update:95
+#: ../urpmi.update:96
 #, c-format
 msgid ""
 "the entry to update is missing\n"
@@ -1688,21 +1847,21 @@ msgstr ""
 "要更新的項目遺失\n"
 "(%s 的其中之一)\n"
 
-#: ../urpmi.update:99
+#: ../urpmi.update:100
 #, c-format
 msgid "\"%s\""
 msgstr "\"%s\""
 
-#: ../urpmi.update:100
-#, c-format
-msgid "enabling media %s"
-msgstr "啟用媒體 %s"
-
-#: ../urpmi.update:100
+#: ../urpmi.update:101
 #, c-format
 msgid "ignoring media %s"
 msgstr "略過媒體 %s"
 
+#: ../urpmi.update:101
+#, c-format
+msgid "enabling media %s"
+msgstr "啟用媒體 %s"
+
 #: ../urpmq:42
 #, c-format
 msgid ""
@@ -1720,54 +1879,66 @@ msgstr ""
 "用法：\n"
 
 #: ../urpmq:50
+#, c-format
 msgid ""
 "  --searchmedia  - use only the given media to search requested (or updated) "
 "packages.\n"
 msgstr "  --searchmedia  - 只使用指定的媒體來搜尋或升級套件。\n"
 
 #: ../urpmq:55
+#, c-format
 msgid "  --fuzzy        - impose fuzzy search (same as -y).\n"
 msgstr "  --fuzzy        - 加上模糊搜尋 (與 -y 相同)。\n"
 
 #: ../urpmq:58
+#, c-format
 msgid "  --list         - list available packages.\n"
 msgstr "  --list         - 列出可用的的套件。\n"
 
 #: ../urpmq:59
+#, c-format
 msgid "  --list-media   - list available media.\n"
 msgstr "  --list-media   - 列出可用的媒體。\n"
 
 #: ../urpmq:60
+#, c-format
 msgid "  --list-url     - list available media and their url.\n"
 msgstr "  --list-url     - 列出可用的媒體與其 URL。\n"
 
 #: ../urpmq:61
+#, c-format
 msgid "  --list-nodes   - list available nodes when using --parallel.\n"
 msgstr "  --list-nodes   - 當使用 --parallel 選項時列出可用的節點。\n"
 
 #: ../urpmq:62
+#, c-format
 msgid "  --list-aliases - list available parallel aliases.\n"
 msgstr "  --list-aliases - 列出可用的同步管理別名。\n"
 
 #: ../urpmq:63
+#, c-format
 msgid ""
 "  --dump-config  - dump the config in form of urpmi.addmedia argument.\n"
 msgstr "  --dump-config  - 以 urpmi.addmedia 的參數形式的匯出設定值。\n"
 
 #: ../urpmq:64
+#, c-format
 msgid "  --src          - next package is a source package (same as -s).\n"
 msgstr "  --src          - 下個套件是原始碼套件 (與 -s 相同)。\n"
 
 #: ../urpmq:65
+#, c-format
 msgid ""
 "  --sources      - give all source packages before downloading (root only).\n"
 msgstr "  --sources      - 下載前先給予所有的原始碼套件 (僅供管理者使用).\n"
 
 #: ../urpmq:67
+#, c-format
 msgid "  --ignorearch   - allow to query rpms for unmatched architectures.\n"
 msgstr "  --ignorearch   - 允許查詢硬體架構不相符的 RPM 檔。\n"
 
-#: ../urpmq:69
+#: ../urpmq:71
+#, c-format
 msgid ""
 "  --use-distrib  - configure urpmi on the fly from a distrib tree.\n"
 "                   This permit to querying a distro.\n"
@@ -1775,95 +1946,192 @@ msgstr ""
 "  --use-distrib  - 立即由一個散佈套件樹設定 urpmi。可用來查詢散佈\n"
 "                   套件。\n"
 
-#: ../urpmq:81
+#: ../urpmq:83
+#, c-format
 msgid "  --changelog    - print changelog.\n"
 msgstr "  --changelog    - 顯示更新紀錄。\n"
 
-#: ../urpmq:82
+#: ../urpmq:84
+#, c-format
 msgid "  --summary, -S  - print summary.\n"
 msgstr "  --summary, -S  - 顯示摘要。\n"
 
-#: ../urpmq:84
+#: ../urpmq:87
+#, c-format
 msgid "  -c             - complete output with package to be removed.\n"
 msgstr "  -c             - 完整輸出要移除的套件。\n"
 
-#: ../urpmq:85
+#: ../urpmq:88
+#, c-format
 msgid "  -d             - extend query to package dependencies.\n"
 msgstr "  -d             - 延伸套件相依性的查詢。\n"
 
-#: ../urpmq:87
+#: ../urpmq:90
+#, c-format
 msgid "  -g             - print groups with name also.\n"
 msgstr "  -g             - 顯示群組名稱。\n"
 
-#: ../urpmq:88
+#: ../urpmq:91
+#, c-format
 msgid "  -i             - print useful information in human readable form.\n"
 msgstr "  -i             - 以人類可讀的形式顯示有用資訊。\n"
 
-#: ../urpmq:89
+#: ../urpmq:92
+#, c-format
 msgid "  -l             - list files in package.\n"
 msgstr "  -l             - 列出套件內包含的檔案。\n"
 
-#: ../urpmq:90
+#: ../urpmq:93
+#, c-format
 msgid ""
 "  -P             - do not search in provides to find package (default).\n"
 msgstr "  -P             - 不於 provides 中搜尋套件 (預設值)。\n"
 
-#: ../urpmq:91
+#: ../urpmq:94
+#, c-format
 msgid "  -p             - search in provides to find package.\n"
 msgstr "  -p             - 於 provides 中搜尋套件。\n"
 
-#: ../urpmq:92
+#: ../urpmq:95
+#, c-format
 msgid "  -r             - print version and release with name also.\n"
 msgstr "  -r             - 顯示名稱時一併顯示版本號與發行編號。\n"
 
-#: ../urpmq:93
+#: ../urpmq:96
+#, c-format
 msgid "  -R             - reverse search to what requires package.\n"
 msgstr "  -R             - 逆向搜尋何者需要此套件。\n"
 
-#: ../urpmq:94
+#: ../urpmq:97
+#, c-format
 msgid ""
 "  -RR            - extended reverse search (includes virtual packages).\n"
 msgstr "  -RR            - 進階逆向搜尋 (包含虛擬套件)。\n"
 
-#: ../urpmq:95
+#: ../urpmq:98
+#, c-format
 msgid "  -s             - next package is a source package (same as --src).\n"
 msgstr "  -s             - 下個套件是原始碼套件 (與 --src 相同)。\n"
 
-#: ../urpmq:96
+#: ../urpmq:99
+#, c-format
 msgid ""
 "  -u             - remove package if a more recent version is already "
 "installed.\n"
 msgstr "  -u             - 若已經安裝較新的版本則移除套件。\n"
 
-#: ../urpmq:98
+#: ../urpmq:100
+#, c-format
 msgid "  -y             - impose fuzzy search (same as --fuzzy).\n"
 msgstr "  -y             - 加上模糊搜尋 (與 --fuzzy 相同)。\n"
 
-#: ../urpmq:99
+#: ../urpmq:101
+#, c-format
 msgid "  -Y             - like -y, but forces to match case-insensitively.\n"
 msgstr "  -Y             - 類似 -y 參數，但強制比對大小寫。\n"
 
-#: ../urpmq:100
+#: ../urpmq:102
+#, c-format
 msgid "  names or rpm files given on command line are queried.\n"
 msgstr "  查詢命令列給予的套件名稱或 RPM 檔案。\n"
 
-#: ../urpmq:176
+#: ../urpmq:177
+#, c-format
 msgid "--list-nodes can only be used with --parallel"
 msgstr "--list-nodes 參數只能夠配合 --parallel 參數一起使用"
 
-#: ../urpmq:332
+#: ../urpmq:333
 #, c-format
 msgid "skipping media %s: no hdlist"
 msgstr "略過媒體 %s：沒有 hdlist 檔"
 
-#: ../urpmq:405
+#: ../urpmq:406
+#, c-format
 msgid "No filelist found\n"
 msgstr "沒有找到檔案列表\n"
 
-#: ../urpmq:417
+#: ../urpmq:418
+#, c-format
 msgid "No changelog found\n"
 msgstr "沒有找到更新紀錄\n"
 
+#~ msgid "mput failed, maybe a node is unreacheable"
+#~ msgstr "mput 失敗，可能無法連接至該節點"
+
+#~ msgid "node %s has an old version of urpme, please upgrade"
+#~ msgstr "節點 %s 使用的是舊版的 urpme，請升級"
+
+#~ msgid "rshp failed, maybe a node is unreacheable"
+#~ msgstr "rshp 失敗，可能無法連接至該節點"
+
+#~ msgid "on node %s"
+#~ msgstr "在節點 %s"
+
+#~ msgid "Propagating synthesis to nodes..."
+#~ msgstr "正在將綜合文件同步到節點..."
+
+#~ msgid "Resolving dependencies on nodes..."
+#~ msgstr "正在處理節點的相依性"
+
+#~ msgid "Distributing files to nodes..."
+#~ msgstr "正在將檔案發佈到節點..."
+
+#~ msgid "Verifying if install is possible on nodes..."
+#~ msgstr "正在驗證是否可在節點上進行安裝..."
+
+#~ msgid "Installation failed on node %s"
+#~ msgstr "節點 %s 安裝失敗"
+
+#~ msgid "Installing packages on nodes..."
+#~ msgstr "正在由節點安裝套件..."
+
+#~ msgid "scp failed on host %s (%d)"
+#~ msgstr "主機 %s scp 失敗 (%d)"
+
+#~ msgid "Propagating synthesis to %s..."
+#~ msgstr "正在將綜合文件傳送到 %s..."
+
+#~ msgid "Resolving dependencies on %s..."
+#~ msgstr "正在解决 %s 上的相依性..."
+
+#~ msgid "host %s does not have a good version of urpmi (%d)"
+#~ msgstr "主機 %s 上的 urpmi 版本並不正確 (%d)"
+
+#~ msgid "Distributing files to %s..."
+#~ msgstr "正在發佈檔案到 %s"
+
+#~ msgid "Verifying if install is possible on %s..."
+#~ msgstr "正在驗證使不可以在 %s 上進行安裝..."
+
+#~ msgid "Performing install on %s..."
+#~ msgstr "正在 %s 上進行安装..."
+
+#~ msgid "Installing %s on %s..."
+#~ msgstr "正在 %2$s 上安装 %1$s..."
+
+#~ msgid "Preparing install on %s..."
+#~ msgstr "正在準備安裝到 %s 上..."
+
+#~ msgid ""
+#~ "To satisfy dependencies, the following package is going to be installed"
+#~ msgstr "為了滿足相依性，將一併安裝下列套件"
+
+#~ msgid "  --probe-synthesis - try to find and use synthesis file.\n"
+#~ msgstr "  --probe-synthesis - 嘗試尋找並使用 synthesis 檔案。\n"
+
+#~ msgid "  --probe-hdlist - try to find and use hdlist file.\n"
+#~ msgstr "  --probe-hdlist - 嘗試尋找並使用 hdlist 檔案。\n"
+
+#~ msgid "`with' missing for network media\n"
+#~ msgstr "使用網路媒體時遺漏了 `with'\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "unknown options '%s'\n"
+#~ msgstr ""
+#~ "\n"
+#~ "未知的選項 '%s'\n"
+
 #~ msgid "unknown protocol defined for %s"
 #~ msgstr "%s 中定義了未知的通訊協定"