diff options
| -rw-r--r-- | MANIFEST | 14 | ||||
| -rw-r--r-- | Makefile | 872 | ||||
| -rw-r--r-- | Makefile.PL | 71 | ||||
| -rw-r--r-- | packdrake-pm/Makefile.PL | 9 | ||||
| -rw-r--r-- | packdrake-pm/packdrake.pm | 515 | ||||
| -rw-r--r-- | packdrake.pm | 173 | ||||
| -rw-r--r-- | rpmtools.spec | 34 |
7 files changed, 1100 insertions, 588 deletions
diff --git a/MANIFEST b/MANIFEST new file mode 100644 index 0000000..4155599 --- /dev/null +++ b/MANIFEST @@ -0,0 +1,14 @@ +gendistrib +genhdlist +rpm2cpio.pl +packdrake +Packdrakeng.pm +packdrake.pm +t/01packdrakeng.t +parsehdlist.c +rpm2header.c +Makefile.PL +rpmtools.spec +MANIFEST + +META.yml Module meta-data (added by MakeMaker) @@ -1,56 +1,844 @@ -VERSION = 4.5 -PREFIX = /usr/local +# This Makefile is for the rpmtools extension to perl. +# +# It was generated automatically by MakeMaker version +# 6.17 (Revision: 1.133) from the contents of +# Makefile.PL. Don't edit this file, edit Makefile.PL instead. +# +# ANY CHANGES MADE HERE WILL BE LOST! +# +# MakeMaker ARGV: () +# +# MakeMaker Parameters: + +# C => [] +# CCFLAGS => q[-Wall] +# EXE_FILES => [q[gendistrib], q[genhdlist], q[packdrake], q[rpm2header], q[parsehdlist], q[rpm2cpio.pl]] +# INC => q[] +# INSTALLDIRS => q[vendor] +# LIBS => [q[]] +# NAME => q[rpmtools] +# OBJECT => q[] +# OPTIMIZE => q[-O3 -fomit-frame-pointer -fno-exceptions -pipe -s -ffast-math -fexpensive-optimizations] +# PM => { Packdrakeng.pm=>q[$(INST_LIBDIR)/Packdrakeng.pm], packdrake.pm=>q[$(INST_LIBDIR)/packdrake.pm] } +# VERSION => q[5.0] +# depend => { pm_to_blib=>q[buildc], clean_subdirs=>q[cleanc] } +# dist => { COMPRESS=>q[bzip2 --best], SUFFIX=>q[.bz2] } +# macro => { LIBRPM=>q[-lrpm -lrpmio -lrpmdb -lrpmbuild -lz -lbz2 -lpopt], DEFRPM=>q[-DRPM_42], FROMC=>q[parsehdlist rpm2header #rpm-find-leaves], INCRPM=>q[-I/usr/include/rpm], RPMTOOLSVERSION=>q[5.0], FROMCC_STATIC=>q[$(FROMCC:%=%_static)], FROMCC=>q[#gendepslist2 hdlist2names hdlist2files hdlist2prereq hdlist2groups], FROMC_STATIC=>q[$(FROMC:%=%_static)] } + +# --- MakeMaker post_initialize section: + + +# --- MakeMaker const_config section: + +# These definitions are from config.sh (via /usr/lib/perl5/5.8.6/i386-linux/Config.pm) + +# They may have been overridden via Makefile.PL or on the command line +AR = ar +CC = gcc +CCCDLFLAGS = -fPIC +CCDLFLAGS = -Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.6/i386-linux/CORE +DLEXT = so +DLSRC = dl_dlopen.xs +LD = gcc +LDDLFLAGS = -shared -L/usr/local/lib +LDFLAGS = -L/usr/local/lib +LIBC = /lib/libc-2.3.3.so +LIB_EXT = .a +OBJ_EXT = .o +OSNAME = linux +OSVERS = 2.6.8.1-2mdkenterprise +RANLIB = : +SITELIBEXP = /usr/lib/perl5/site_perl/5.8.6 +SITEARCHEXP = /usr/lib/perl5/site_perl/5.8.6/i386-linux +SO = so +EXE_EXT = +FULL_AR = /usr/bin/ar +VENDORARCHEXP = /usr/lib/perl5/vendor_perl/5.8.6/i386-linux +VENDORLIBEXP = /usr/lib/perl5/vendor_perl/5.8.6 + + +# --- MakeMaker constants section: +AR_STATIC_ARGS = cr +DIRFILESEP = / NAME = rpmtools +NAME_SYM = rpmtools +VERSION = 5.0 +VERSION_MACRO = VERSION +VERSION_SYM = 5_0 +DEFINE_VERSION = -D$(VERSION_MACRO)=\"$(VERSION)\" +XS_VERSION = 5.0 +XS_VERSION_MACRO = XS_VERSION +XS_DEFINE_VERSION = -D$(XS_VERSION_MACRO)=\"$(XS_VERSION)\" +INST_ARCHLIB = blib/arch +INST_SCRIPT = blib/script +INST_BIN = blib/bin +INST_LIB = blib/lib +INST_MAN1DIR = blib/man1 +INST_MAN3DIR = blib/man3 +MAN1EXT = 1 +MAN3EXT = 3pm +INSTALLDIRS = vendor +DESTDIR = +PREFIX = +PERLPREFIX = /usr +SITEPREFIX = /usr +VENDORPREFIX = /usr +INSTALLPRIVLIB = $(PERLPREFIX)/lib/perl5/5.8.6 +DESTINSTALLPRIVLIB = $(DESTDIR)$(INSTALLPRIVLIB) +INSTALLSITELIB = $(SITEPREFIX)/lib/perl5/site_perl/5.8.6 +DESTINSTALLSITELIB = $(DESTDIR)$(INSTALLSITELIB) +INSTALLVENDORLIB = $(VENDORPREFIX)/lib/perl5/vendor_perl/5.8.6 +DESTINSTALLVENDORLIB = $(DESTDIR)$(INSTALLVENDORLIB) +INSTALLARCHLIB = $(PERLPREFIX)/lib/perl5/5.8.6/i386-linux +DESTINSTALLARCHLIB = $(DESTDIR)$(INSTALLARCHLIB) +INSTALLSITEARCH = $(SITEPREFIX)/lib/perl5/site_perl/5.8.6/i386-linux +DESTINSTALLSITEARCH = $(DESTDIR)$(INSTALLSITEARCH) +INSTALLVENDORARCH = $(VENDORPREFIX)/lib/perl5/vendor_perl/5.8.6/i386-linux +DESTINSTALLVENDORARCH = $(DESTDIR)$(INSTALLVENDORARCH) +INSTALLBIN = $(PERLPREFIX)/bin +DESTINSTALLBIN = $(DESTDIR)$(INSTALLBIN) +INSTALLSITEBIN = $(SITEPREFIX)/bin +DESTINSTALLSITEBIN = $(DESTDIR)$(INSTALLSITEBIN) +INSTALLVENDORBIN = $(VENDORPREFIX)/bin +DESTINSTALLVENDORBIN = $(DESTDIR)$(INSTALLVENDORBIN) +INSTALLSCRIPT = $(PERLPREFIX)/bin +DESTINSTALLSCRIPT = $(DESTDIR)$(INSTALLSCRIPT) +INSTALLMAN1DIR = $(PERLPREFIX)/share/man/man1 +DESTINSTALLMAN1DIR = $(DESTDIR)$(INSTALLMAN1DIR) +INSTALLSITEMAN1DIR = $(SITEPREFIX)/share/man/man1 +DESTINSTALLSITEMAN1DIR = $(DESTDIR)$(INSTALLSITEMAN1DIR) +INSTALLVENDORMAN1DIR = $(VENDORPREFIX)/share/man/man1 +DESTINSTALLVENDORMAN1DIR = $(DESTDIR)$(INSTALLVENDORMAN1DIR) +INSTALLMAN3DIR = $(PERLPREFIX)/share/man/man3 +DESTINSTALLMAN3DIR = $(DESTDIR)$(INSTALLMAN3DIR) +INSTALLSITEMAN3DIR = $(SITEPREFIX)/share/man/man3 +DESTINSTALLSITEMAN3DIR = $(DESTDIR)$(INSTALLSITEMAN3DIR) +INSTALLVENDORMAN3DIR = $(VENDORPREFIX)/share/man/man3 +DESTINSTALLVENDORMAN3DIR = $(DESTDIR)$(INSTALLVENDORMAN3DIR) +PERL_LIB = /usr/lib/perl5/5.8.6 +PERL_ARCHLIB = /usr/lib/perl5/5.8.6/i386-linux +LIBPERL_A = libperl.a +FIRST_MAKEFILE = Makefile +MAKEFILE_OLD = $(FIRST_MAKEFILE).old +MAKE_APERL_FILE = $(FIRST_MAKEFILE).aperl +PERLMAINCC = $(CC) +PERL_INC = /usr/lib/perl5/5.8.6/i386-linux/CORE +PERL = /usr/bin/perl5.8.6 +FULLPERL = /usr/bin/perl5.8.6 +ABSPERL = $(PERL) +PERLRUN = $(PERL) +FULLPERLRUN = $(FULLPERL) +ABSPERLRUN = $(ABSPERL) +PERLRUNINST = $(PERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" +FULLPERLRUNINST = $(FULLPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" +ABSPERLRUNINST = $(ABSPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" +PERL_CORE = 0 +PERM_RW = 644 +PERM_RWX = 755 + +MAKEMAKER = /usr/lib/perl5/5.8.6/ExtUtils/MakeMaker.pm +MM_VERSION = 6.17 +MM_REVISION = 1.133 + +# FULLEXT = Pathname for extension directory (eg Foo/Bar/Oracle). +# BASEEXT = Basename part of FULLEXT. May be just equal FULLEXT. (eg Oracle) +# PARENT_NAME = NAME without BASEEXT and no trailing :: (eg Foo::Bar) +# DLBASE = Basename part of dynamic library. May be just equal BASEEXT. +FULLEXT = rpmtools +BASEEXT = rpmtools +PARENT_NAME = +DLBASE = $(BASEEXT) +VERSION_FROM = +INC = +OBJECT = +LDFROM = $(OBJECT) +LINKTYPE = dynamic + +# Handy lists of source code files: +XS_FILES = +C_FILES = +O_FILES = +H_FILES = +MAN1PODS = parsehdlist \ + rpm2header +MAN3PODS = Packdrakeng.pm + +# Where is the Config information that we are using/depend on +CONFIGDEP = $(PERL_ARCHLIB)$(DIRFILESEP)Config.pm $(PERL_INC)$(DIRFILESEP)config.h + +# Where to build things +INST_LIBDIR = $(INST_LIB) +INST_ARCHLIBDIR = $(INST_ARCHLIB) + +INST_AUTODIR = $(INST_LIB)/auto/$(FULLEXT) +INST_ARCHAUTODIR = $(INST_ARCHLIB)/auto/$(FULLEXT) + +INST_STATIC = +INST_DYNAMIC = +INST_BOOT = + +# Extra linker info +EXPORT_LIST = +PERL_ARCHIVE = +PERL_ARCHIVE_AFTER = + + +TO_INST_PM = Packdrakeng.pm \ + packdrake.pm + +PM_TO_BLIB = Packdrakeng.pm \ + $(INST_LIBDIR)/Packdrakeng.pm \ + packdrake.pm \ + $(INST_LIBDIR)/packdrake.pm + + +# --- MakeMaker platform_constants section: +MM_Unix_VERSION = 1.42 +PERL_MALLOC_DEF = -DPERL_EXTMALLOC_DEF -Dmalloc=Perl_malloc -Dfree=Perl_mfree -Drealloc=Perl_realloc -Dcalloc=Perl_calloc + + +# --- MakeMaker tool_autosplit section: +# Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto +AUTOSPLITFILE = $(PERLRUN) -e 'use AutoSplit; autosplit($$ARGV[0], $$ARGV[1], 0, 1, 1)' + + + +# --- MakeMaker tool_xsubpp section: + + +# --- MakeMaker tools_other section: +SHELL = /bin/sh +CHMOD = chmod +CP = cp +MV = mv +NOOP = $(SHELL) -c true +NOECHO = @ +RM_F = rm -f +RM_RF = rm -rf +TEST_F = test -f +TOUCH = touch +UMASK_NULL = umask 0 +DEV_NULL = > /dev/null 2>&1 +MKPATH = $(PERLRUN) "-MExtUtils::Command" -e mkpath +EQUALIZE_TIMESTAMP = $(PERLRUN) "-MExtUtils::Command" -e eqtime +ECHO = echo +ECHO_N = echo -n +UNINST = 0 +VERBINST = 0 +MOD_INSTALL = $(PERLRUN) -MExtUtils::Install -e 'install({@ARGV}, '\''$(VERBINST)'\'', 0, '\''$(UNINST)'\'');' +DOC_INSTALL = $(PERLRUN) "-MExtUtils::Command::MM" -e perllocal_install +UNINSTALL = $(PERLRUN) "-MExtUtils::Command::MM" -e uninstall +WARN_IF_OLD_PACKLIST = $(PERLRUN) "-MExtUtils::Command::MM" -e warn_if_old_packlist + + +# --- MakeMaker makemakerdflt section: +makemakerdflt: all + $(NOECHO) $(NOOP) + + +# --- MakeMaker dist section: +TAR = tar +TARFLAGS = cvf +ZIP = zip +ZIPFLAGS = -r +COMPRESS = bzip2 --best +SUFFIX = .bz2 +SHAR = shar +PREOP = $(NOECHO) $(NOOP) +POSTOP = $(NOECHO) $(NOOP) +TO_UNIX = $(NOECHO) $(NOOP) +CI = ci -u +RCS_LABEL = rcs -Nv$(VERSION_SYM): -q +DIST_CP = best +DIST_DEFAULT = tardist +DISTNAME = rpmtools +DISTVNAME = rpmtools-5.0 + + +# --- MakeMaker macro section: +LIBRPM = -lrpm -lrpmio -lrpmdb -lrpmbuild -lz -lbz2 -lpopt +DEFRPM = -DRPM_42 FROMC = parsehdlist rpm2header #rpm-find-leaves -FROMCC = #gendepslist2 hdlist2names hdlist2files hdlist2prereq hdlist2groups -FROMC_STATIC = $(FROMC:%=%_static) +INCRPM = -I/usr/include/rpm +RPMTOOLSVERSION = 5.0 FROMCC_STATIC = $(FROMCC:%=%_static) -ALL = $(FROMC) $(FROMCC) -ALL_STATIC = $(FROMC_STATIC) $(FROMCC_STATIC) -CFLAGS = -Wall -g `perl -e 'qx(rpm -q --qf %{VERSION} rpm)=~/^(?:4\.[2-9]|[5-9]|\d{2})/&&print -DRPM_42'` -LIBRPM = -lrpm -lrpmio `perl -e 'local $$_ = qx(rpm -q --qf %{VERSION} rpm); /^4\.0\s*$$/ or print "-lrpmdb"'` -lz -lbz2 -I/usr/include/rpm -lpopt -LIBRPM_STATIC = -RPM = `rpm --eval %_topdir` +FROMCC = #gendepslist2 hdlist2names hdlist2files hdlist2prereq hdlist2groups +FROMC_STATIC = $(FROMC:%=%_static) + + +# --- MakeMaker depend section: +pm_to_blib : buildc +clean_subdirs : cleanc + + +# --- MakeMaker cflags section: + + +# --- MakeMaker const_loadlibs section: + + +# --- MakeMaker const_cccmd section: + + +# --- MakeMaker post_constants section: + + +# --- MakeMaker pasthru section: + +PASTHRU = LIB="$(LIB)"\ + LIBPERL_A="$(LIBPERL_A)"\ + LINKTYPE="$(LINKTYPE)"\ + PREFIX="$(PREFIX)"\ + OPTIMIZE="$(OPTIMIZE)"\ + PASTHRU_DEFINE="$(PASTHRU_DEFINE)"\ + PASTHRU_INC="$(PASTHRU_INC)" + + +# --- MakeMaker special_targets section: +.SUFFIXES: .xs .c .C .cpp .i .s .cxx .cc $(OBJ_EXT) + +.PHONY: all config static dynamic test linkext manifest + + + +# --- MakeMaker c_o section: + + +# --- MakeMaker xs_c section: + + +# --- MakeMaker xs_o section: + + +# --- MakeMaker top_targets section: +all :: pure_all manifypods + $(NOECHO) $(NOOP) + + +pure_all :: config pm_to_blib subdirs linkext + $(NOECHO) $(NOOP) + +subdirs :: $(MYEXTLIB) + $(NOECHO) $(NOOP) + +config :: $(FIRST_MAKEFILE) $(INST_LIBDIR)$(DIRFILESEP).exists + $(NOECHO) $(NOOP) + +config :: $(INST_ARCHAUTODIR)$(DIRFILESEP).exists + $(NOECHO) $(NOOP) + +config :: $(INST_AUTODIR)$(DIRFILESEP).exists + $(NOECHO) $(NOOP) + +$(INST_AUTODIR)/.exists :: /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h + $(NOECHO) $(MKPATH) $(INST_AUTODIR) + $(NOECHO) $(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h $(INST_AUTODIR)/.exists + + -$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_AUTODIR) + +$(INST_LIBDIR)/.exists :: /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h + $(NOECHO) $(MKPATH) $(INST_LIBDIR) + $(NOECHO) $(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h $(INST_LIBDIR)/.exists + + -$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_LIBDIR) + +$(INST_ARCHAUTODIR)/.exists :: /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h + $(NOECHO) $(MKPATH) $(INST_ARCHAUTODIR) + $(NOECHO) $(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h $(INST_ARCHAUTODIR)/.exists + + -$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_ARCHAUTODIR) + +config :: $(INST_MAN1DIR)$(DIRFILESEP).exists + $(NOECHO) $(NOOP) + + +$(INST_MAN1DIR)/.exists :: /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h + $(NOECHO) $(MKPATH) $(INST_MAN1DIR) + $(NOECHO) $(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h $(INST_MAN1DIR)/.exists + + -$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_MAN1DIR) + +config :: $(INST_MAN3DIR)$(DIRFILESEP).exists + $(NOECHO) $(NOOP) + + +$(INST_MAN3DIR)/.exists :: /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h + $(NOECHO) $(MKPATH) $(INST_MAN3DIR) + $(NOECHO) $(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h $(INST_MAN3DIR)/.exists + + -$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_MAN3DIR) + +help: + perldoc ExtUtils::MakeMaker + + +# --- MakeMaker linkext section: + +linkext :: $(LINKTYPE) + $(NOECHO) $(NOOP) + + +# --- MakeMaker dlsyms section: + + +# --- MakeMaker dynamic section: + +dynamic :: $(FIRST_MAKEFILE) $(INST_DYNAMIC) $(INST_BOOT) + $(NOECHO) $(NOOP) + + +# --- MakeMaker dynamic_bs section: + +BOOTSTRAP = + + +# --- MakeMaker dynamic_lib section: + + +# --- MakeMaker static section: + +## $(INST_PM) has been moved to the all: target. +## It remains here for awhile to allow for old usage: "make static" +static :: $(FIRST_MAKEFILE) $(INST_STATIC) + $(NOECHO) $(NOOP) + + +# --- MakeMaker static_lib section: + + +# --- MakeMaker manifypods section: + +POD2MAN_EXE = $(PERLRUN) "-MExtUtils::Command::MM" -e pod2man "--" +POD2MAN = $(POD2MAN_EXE) + + +manifypods : pure_all \ + parsehdlist \ + rpm2header \ + Packdrakeng.pm \ + Packdrakeng.pm + $(NOECHO) $(POD2MAN) --section=1 --perm_rw=$(PERM_RW)\ + parsehdlist $(INST_MAN1DIR)/parsehdlist.$(MAN1EXT) \ + rpm2header $(INST_MAN1DIR)/rpm2header.$(MAN1EXT) + $(NOECHO) $(POD2MAN) --section=3 --perm_rw=$(PERM_RW)\ + Packdrakeng.pm $(INST_MAN3DIR)/Packdrakeng.$(MAN3EXT) + + + + +# --- MakeMaker processPL section: + -all: $(ALL) - @echo $(INSTALLVENDORLIB) +# --- MakeMaker installbin section: -install: $(ALL) - install -d $(PREFIX)/usr/bin - install -s $(ALL) $(PREFIX)/usr/bin - install gendistrib distriblint genhdlist packdrake rpm2cpio.pl $(PREFIX)/usr/bin +$(INST_SCRIPT)/.exists :: /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h + $(NOECHO) $(MKPATH) $(INST_SCRIPT) + $(NOECHO) $(EQUALIZE_TIMESTAMP) /usr/lib/perl5/5.8.6/i386-linux/CORE/perl.h $(INST_SCRIPT)/.exists + + -$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_SCRIPT) + +EXE_FILES = gendistrib genhdlist packdrake rpm2header parsehdlist rpm2cpio.pl + +FIXIN = $(PERLRUN) "-MExtUtils::MY" -e "MY->fixin(shift)" + +pure_all :: $(INST_SCRIPT)/genhdlist $(INST_SCRIPT)/rpm2cpio.pl $(INST_SCRIPT)/parsehdlist $(INST_SCRIPT)/rpm2header $(INST_SCRIPT)/packdrake $(INST_SCRIPT)/gendistrib + $(NOECHO) $(NOOP) + +realclean :: + $(RM_F) $(INST_SCRIPT)/genhdlist $(INST_SCRIPT)/rpm2cpio.pl $(INST_SCRIPT)/parsehdlist $(INST_SCRIPT)/rpm2header $(INST_SCRIPT)/packdrake $(INST_SCRIPT)/gendistrib + +$(INST_SCRIPT)/genhdlist: genhdlist $(FIRST_MAKEFILE) $(INST_SCRIPT)/.exists + $(NOECHO) $(RM_F) $(INST_SCRIPT)/genhdlist + $(CP) genhdlist $(INST_SCRIPT)/genhdlist + $(FIXIN) $(INST_SCRIPT)/genhdlist + -$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_SCRIPT)/genhdlist + +$(INST_SCRIPT)/rpm2cpio.pl: rpm2cpio.pl $(FIRST_MAKEFILE) $(INST_SCRIPT)/.exists + $(NOECHO) $(RM_F) $(INST_SCRIPT)/rpm2cpio.pl + $(CP) rpm2cpio.pl $(INST_SCRIPT)/rpm2cpio.pl + $(FIXIN) $(INST_SCRIPT)/rpm2cpio.pl + -$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_SCRIPT)/rpm2cpio.pl + +$(INST_SCRIPT)/parsehdlist: parsehdlist $(FIRST_MAKEFILE) $(INST_SCRIPT)/.exists + $(NOECHO) $(RM_F) $(INST_SCRIPT)/parsehdlist + $(CP) parsehdlist $(INST_SCRIPT)/parsehdlist + $(FIXIN) $(INST_SCRIPT)/parsehdlist + -$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_SCRIPT)/parsehdlist + +$(INST_SCRIPT)/rpm2header: rpm2header $(FIRST_MAKEFILE) $(INST_SCRIPT)/.exists + $(NOECHO) $(RM_F) $(INST_SCRIPT)/rpm2header + $(CP) rpm2header $(INST_SCRIPT)/rpm2header + $(FIXIN) $(INST_SCRIPT)/rpm2header + -$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_SCRIPT)/rpm2header + +$(INST_SCRIPT)/packdrake: packdrake $(FIRST_MAKEFILE) $(INST_SCRIPT)/.exists + $(NOECHO) $(RM_F) $(INST_SCRIPT)/packdrake + $(CP) packdrake $(INST_SCRIPT)/packdrake + $(FIXIN) $(INST_SCRIPT)/packdrake + -$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_SCRIPT)/packdrake + +$(INST_SCRIPT)/gendistrib: gendistrib $(FIRST_MAKEFILE) $(INST_SCRIPT)/.exists + $(NOECHO) $(RM_F) $(INST_SCRIPT)/gendistrib + $(CP) gendistrib $(INST_SCRIPT)/gendistrib + $(FIXIN) $(INST_SCRIPT)/gendistrib + -$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_SCRIPT)/gendistrib + + +# --- MakeMaker subdirs section: + +# none + +# --- MakeMaker clean_subdirs section: +clean_subdirs : + $(NOECHO) $(NOOP) + + +# --- MakeMaker clean section: + +# Delete temporary files but do not touch installed files. We don't delete +# the Makefile here so a later make realclean still has a makefile to use. + +clean :: clean_subdirs + -$(RM_RF) ./blib $(MAKE_APERL_FILE) $(INST_ARCHAUTODIR)/extralibs.all $(INST_ARCHAUTODIR)/extralibs.ld perlmain.c tmon.out mon.out so_locations pm_to_blib *$(OBJ_EXT) *$(LIB_EXT) perl.exe perl perl$(EXE_EXT) $(BOOTSTRAP) $(BASEEXT).bso $(BASEEXT).def lib$(BASEEXT).def $(BASEEXT).exp $(BASEEXT).x core core.*perl.*.? *perl.core core.[0-9] core.[0-9][0-9] core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9][0-9] + -$(MV) $(FIRST_MAKEFILE) $(MAKEFILE_OLD) $(DEV_NULL) + + +# --- MakeMaker realclean_subdirs section: +realclean_subdirs : + $(NOECHO) $(NOOP) + + +# --- MakeMaker realclean section: + +# Delete temporary files (via clean) and also delete installed files +realclean purge :: clean realclean_subdirs + $(RM_RF) $(INST_AUTODIR) $(INST_ARCHAUTODIR) + $(RM_RF) $(DISTVNAME) + $(RM_F) $(INST_LIBDIR)/Packdrakeng.pm $(MAKEFILE_OLD) $(FIRST_MAKEFILE) $(INST_LIBDIR)/packdrake.pm + + +# --- MakeMaker metafile section: +metafile : + $(NOECHO) $(ECHO) '# http://module-build.sourceforge.net/META-spec.html' > META.yml + $(NOECHO) $(ECHO) '#XXXXXXX This is a prototype!!! It will change in the future!!! XXXXX#' >> META.yml + $(NOECHO) $(ECHO) 'name: rpmtools' >> META.yml + $(NOECHO) $(ECHO) 'version: 5.0' >> META.yml + $(NOECHO) $(ECHO) 'version_from: ' >> META.yml + $(NOECHO) $(ECHO) 'installdirs: vendor' >> META.yml + $(NOECHO) $(ECHO) 'requires:' >> META.yml + $(NOECHO) $(ECHO) '' >> META.yml + $(NOECHO) $(ECHO) 'distribution_type: module' >> META.yml + $(NOECHO) $(ECHO) 'generated_by: ExtUtils::MakeMaker version 6.17' >> META.yml + + +# --- MakeMaker metafile_addtomanifest section: +metafile_addtomanifest: + $(NOECHO) $(PERLRUN) -MExtUtils::Manifest=maniadd -e 'eval { maniadd({q{META.yml} => q{Module meta-data (added by MakeMaker)}}) } ' \ + -e ' or print "Could not add META.yml to MANIFEST: $${'\''@'\''}\n"' + + +# --- MakeMaker dist_basics section: +distclean :: realclean distcheck + $(NOECHO) $(NOOP) + +distcheck : + $(PERLRUN) "-MExtUtils::Manifest=fullcheck" -e fullcheck + +skipcheck : + $(PERLRUN) "-MExtUtils::Manifest=skipcheck" -e skipcheck + +manifest : + $(PERLRUN) "-MExtUtils::Manifest=mkmanifest" -e mkmanifest + +veryclean : realclean + $(RM_F) *~ *.orig */*~ */*.orig + + + +# --- MakeMaker dist_core section: + +dist : $(DIST_DEFAULT) $(FIRST_MAKEFILE) + $(NOECHO) $(PERLRUN) -l -e 'print '\''Warning: Makefile possibly out of date with $(VERSION_FROM)'\''' \ + -e ' if -e '\''$(VERSION_FROM)'\'' and -M '\''$(VERSION_FROM)'\'' < -M '\''$(FIRST_MAKEFILE)'\'';' + +tardist : $(DISTVNAME).tar$(SUFFIX) + $(NOECHO) $(NOOP) + +uutardist : $(DISTVNAME).tar$(SUFFIX) + uuencode $(DISTVNAME).tar$(SUFFIX) $(DISTVNAME).tar$(SUFFIX) > $(DISTVNAME).tar$(SUFFIX)_uu + +$(DISTVNAME).tar$(SUFFIX) : distdir + $(PREOP) + $(TO_UNIX) + $(TAR) $(TARFLAGS) $(DISTVNAME).tar $(DISTVNAME) + $(RM_RF) $(DISTVNAME) + $(COMPRESS) $(DISTVNAME).tar + $(POSTOP) + +zipdist : $(DISTVNAME).zip + $(NOECHO) $(NOOP) + +$(DISTVNAME).zip : distdir + $(PREOP) + $(ZIP) $(ZIPFLAGS) $(DISTVNAME).zip $(DISTVNAME) + $(RM_RF) $(DISTVNAME) + $(POSTOP) + +shdist : distdir + $(PREOP) + $(SHAR) $(DISTVNAME) > $(DISTVNAME).shar + $(RM_RF) $(DISTVNAME) + $(POSTOP) + + +# --- MakeMaker distdir section: +distdir : metafile metafile_addtomanifest + $(RM_RF) $(DISTVNAME) + $(PERLRUN) "-MExtUtils::Manifest=manicopy,maniread" \ + -e "manicopy(maniread(),'$(DISTVNAME)', '$(DIST_CP)');" + + + +# --- MakeMaker dist_test section: + +disttest : distdir + cd $(DISTVNAME) && $(ABSPERLRUN) Makefile.PL + cd $(DISTVNAME) && $(MAKE) $(PASTHRU) + cd $(DISTVNAME) && $(MAKE) test $(PASTHRU) + + +# --- MakeMaker dist_ci section: + +ci : + $(PERLRUN) "-MExtUtils::Manifest=maniread" \ + -e "@all = keys %{ maniread() };" \ + -e "print(qq{Executing $(CI) @all\n}); system(qq{$(CI) @all});" \ + -e "print(qq{Executing $(RCS_LABEL) ...\n}); system(qq{$(RCS_LABEL) @all});" + + +# --- MakeMaker install section: + +install :: all pure_install doc_install + +install_perl :: all pure_perl_install doc_perl_install + +install_site :: all pure_site_install doc_site_install + +install_vendor :: all pure_vendor_install doc_vendor_install + +pure_install :: pure_$(INSTALLDIRS)_install + +doc_install :: doc_$(INSTALLDIRS)_install + +pure__install : pure_site_install + $(NOECHO) $(ECHO) INSTALLDIRS not defined, defaulting to INSTALLDIRS=site + +doc__install : doc_site_install + $(NOECHO) $(ECHO) INSTALLDIRS not defined, defaulting to INSTALLDIRS=site + +pure_perl_install :: + $(NOECHO) $(MOD_INSTALL) \ + read $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist \ + write $(DESTINSTALLARCHLIB)/auto/$(FULLEXT)/.packlist \ + $(INST_LIB) $(DESTINSTALLPRIVLIB) \ + $(INST_ARCHLIB) $(DESTINSTALLARCHLIB) \ + $(INST_BIN) $(DESTINSTALLBIN) \ + $(INST_SCRIPT) $(DESTINSTALLSCRIPT) \ + $(INST_MAN1DIR) $(DESTINSTALLMAN1DIR) \ + $(INST_MAN3DIR) $(DESTINSTALLMAN3DIR) + $(NOECHO) $(WARN_IF_OLD_PACKLIST) \ + $(SITEARCHEXP)/auto/$(FULLEXT) + + +pure_site_install :: + $(NOECHO) $(MOD_INSTALL) \ + read $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist \ + write $(DESTINSTALLSITEARCH)/auto/$(FULLEXT)/.packlist \ + $(INST_LIB) $(DESTINSTALLSITELIB) \ + $(INST_ARCHLIB) $(DESTINSTALLSITEARCH) \ + $(INST_BIN) $(DESTINSTALLSITEBIN) \ + $(INST_SCRIPT) $(DESTINSTALLSCRIPT) \ + $(INST_MAN1DIR) $(DESTINSTALLSITEMAN1DIR) \ + $(INST_MAN3DIR) $(DESTINSTALLSITEMAN3DIR) + $(NOECHO) $(WARN_IF_OLD_PACKLIST) \ + $(PERL_ARCHLIB)/auto/$(FULLEXT) + +pure_vendor_install :: + $(NOECHO) $(MOD_INSTALL) \ + read $(VENDORARCHEXP)/auto/$(FULLEXT)/.packlist \ + write $(DESTINSTALLVENDORARCH)/auto/$(FULLEXT)/.packlist \ + $(INST_LIB) $(DESTINSTALLVENDORLIB) \ + $(INST_ARCHLIB) $(DESTINSTALLVENDORARCH) \ + $(INST_BIN) $(DESTINSTALLVENDORBIN) \ + $(INST_SCRIPT) $(DESTINSTALLSCRIPT) \ + $(INST_MAN1DIR) $(DESTINSTALLVENDORMAN1DIR) \ + $(INST_MAN3DIR) $(DESTINSTALLVENDORMAN3DIR) + +doc_perl_install :: + $(NOECHO) $(ECHO) Appending installation info to $(DESTINSTALLARCHLIB)/perllocal.pod + -$(NOECHO) $(MKPATH) $(DESTINSTALLARCHLIB) + -$(NOECHO) $(DOC_INSTALL) \ + "Module" "$(NAME)" \ + "installed into" "$(INSTALLPRIVLIB)" \ + LINKTYPE "$(LINKTYPE)" \ + VERSION "$(VERSION)" \ + EXE_FILES "$(EXE_FILES)" \ + >> $(DESTINSTALLARCHLIB)/perllocal.pod + +doc_site_install :: + $(NOECHO) $(ECHO) Appending installation info to $(DESTINSTALLARCHLIB)/perllocal.pod + -$(NOECHO) $(MKPATH) $(DESTINSTALLARCHLIB) + -$(NOECHO) $(DOC_INSTALL) \ + "Module" "$(NAME)" \ + "installed into" "$(INSTALLSITELIB)" \ + LINKTYPE "$(LINKTYPE)" \ + VERSION "$(VERSION)" \ + EXE_FILES "$(EXE_FILES)" \ + >> $(DESTINSTALLARCHLIB)/perllocal.pod + +doc_vendor_install :: + $(NOECHO) $(ECHO) Appending installation info to $(DESTINSTALLARCHLIB)/perllocal.pod + -$(NOECHO) $(MKPATH) $(DESTINSTALLARCHLIB) + -$(NOECHO) $(DOC_INSTALL) \ + "Module" "$(NAME)" \ + "installed into" "$(INSTALLVENDORLIB)" \ + LINKTYPE "$(LINKTYPE)" \ + VERSION "$(VERSION)" \ + EXE_FILES "$(EXE_FILES)" \ + >> $(DESTINSTALLARCHLIB)/perllocal.pod + + +uninstall :: uninstall_from_$(INSTALLDIRS)dirs + +uninstall_from_perldirs :: + $(NOECHO) $(UNINSTALL) $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist + +uninstall_from_sitedirs :: + $(NOECHO) $(UNINSTALL) $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist + +uninstall_from_vendordirs :: + $(NOECHO) $(UNINSTALL) $(VENDORARCHEXP)/auto/$(FULLEXT)/.packlist + + +# --- MakeMaker force section: +# Phony target to force checking subdirectories. +FORCE: + $(NOECHO) $(NOOP) + + +# --- MakeMaker perldepend section: + + +# --- MakeMaker makefile section: + +# We take a very conservative approach here, but it's worth it. +# We move Makefile to Makefile.old here to avoid gnu make looping. +$(FIRST_MAKEFILE) : Makefile.PL $(CONFIGDEP) + $(NOECHO) $(ECHO) "Makefile out-of-date with respect to $?" + $(NOECHO) $(ECHO) "Cleaning current config before rebuilding Makefile..." + $(NOECHO) $(RM_F) $(MAKEFILE_OLD) + $(NOECHO) $(MV) $(FIRST_MAKEFILE) $(MAKEFILE_OLD) + -$(MAKE) -f $(MAKEFILE_OLD) clean $(DEV_NULL) || $(NOOP) + $(PERLRUN) Makefile.PL + $(NOECHO) $(ECHO) "==> Your Makefile has been rebuilt. <==" + $(NOECHO) $(ECHO) "==> Please rerun the make command. <==" + false + + + +# --- MakeMaker staticmake section: + +# --- MakeMaker makeaperl section --- +MAP_TARGET = perl +FULLPERL = /usr/bin/perl5.8.6 + +$(MAP_TARGET) :: static $(MAKE_APERL_FILE) + $(MAKE) -f $(MAKE_APERL_FILE) $@ + +$(MAKE_APERL_FILE) : $(FIRST_MAKEFILE) + $(NOECHO) $(ECHO) Writing \"$(MAKE_APERL_FILE)\" for this $(MAP_TARGET) + $(NOECHO) $(PERLRUNINST) \ + Makefile.PL DIR= \ + MAKEFILE=$(MAKE_APERL_FILE) LINKTYPE=static \ + MAKEAPERL=1 NORECURS=1 CCCDLFLAGS= + + +# --- MakeMaker test section: + +TEST_VERBOSE=0 +TEST_TYPE=test_$(LINKTYPE) +TEST_FILE = test.pl +TEST_FILES = t/*.t +TESTDB_SW = -d + +testdb :: testdb_$(LINKTYPE) + +test :: $(TEST_TYPE) + +test_dynamic :: pure_all + PERL_DL_NONLAZY=1 $(FULLPERLRUN) "-MExtUtils::Command::MM" "-e" "test_harness($(TEST_VERBOSE), '$(INST_LIB)', '$(INST_ARCHLIB)')" $(TEST_FILES) + +testdb_dynamic :: pure_all + PERL_DL_NONLAZY=1 $(FULLPERLRUN) $(TESTDB_SW) "-I$(INST_LIB)" "-I$(INST_ARCHLIB)" $(TEST_FILE) + +test_ : test_dynamic + +test_static :: test_dynamic +testdb_static :: testdb_dynamic + + +# --- MakeMaker ppd section: +# Creates a PPD (Perl Package Description) for a binary distribution. +ppd: + $(NOECHO) $(ECHO) '<SOFTPKG NAME="$(DISTNAME)" VERSION="5,0,0,0">' > $(DISTNAME).ppd + $(NOECHO) $(ECHO) ' <TITLE>$(DISTNAME)</TITLE>' >> $(DISTNAME).ppd + $(NOECHO) $(ECHO) ' <ABSTRACT></ABSTRACT>' >> $(DISTNAME).ppd + $(NOECHO) $(ECHO) ' <AUTHOR></AUTHOR>' >> $(DISTNAME).ppd + $(NOECHO) $(ECHO) ' <IMPLEMENTATION>' >> $(DISTNAME).ppd + $(NOECHO) $(ECHO) ' <OS NAME="$(OSNAME)" />' >> $(DISTNAME).ppd + $(NOECHO) $(ECHO) ' <ARCHITECTURE NAME="i386-linux" />' >> $(DISTNAME).ppd + $(NOECHO) $(ECHO) ' <CODEBASE HREF="" />' >> $(DISTNAME).ppd + $(NOECHO) $(ECHO) ' </IMPLEMENTATION>' >> $(DISTNAME).ppd + $(NOECHO) $(ECHO) '</SOFTPKG>' >> $(DISTNAME).ppd + + +# --- MakeMaker pm_to_blib section: + +pm_to_blib: $(TO_INST_PM) + $(NOECHO) $(PERLRUN) -MExtUtils::Install -e 'pm_to_blib({@ARGV}, '\''$(INST_LIB)/auto'\'', '\''$(PM_FILTER)'\'')'\ + Packdrakeng.pm $(INST_LIBDIR)/Packdrakeng.pm \ + packdrake.pm $(INST_LIBDIR)/packdrake.pm + $(NOECHO) $(TOUCH) $@ + +# --- MakeMaker selfdocument section: + + +# --- MakeMaker postamble section: +.PHONY: ChangeLog $(FROMCC): %: %.cc - $(CXX) $(CFLAGS) -DVERSION_STRING=\"$(VERSION)\" $< $(LIBRPM) -o $@ + $(CXX) $(CCFLAGS) $(OPTIMIZE) -DVERSION_STRING=\"$(RPMTOOLSVERSION)\" $< $(LIBRPM) $(INCRPM) $(DEFRPM) -o $@ $(FROMCC_STATIC): %_static: %.cc - $(CXX) -s -static $(CFLAGS) -DVERSION_STRING=\"$(VERSION)\" $< $(LIBRPM) -o $@ + $(CXX) -s -static $(CCFLAGS) $(OPTIMIZE) -DVERSION_STRING=\"$(RPMTOOLSVERSION)\" $< $(LIBRPM) $(INCRPM) $(DEFRPM) -o $@ $(FROMC): %: %.c - $(CC) $(CFLAGS) -DVERSION_STRING=\"$(VERSION)\" $< $(LIBRPM) -o $@ + $(CC) $(CCFLAGS) $(OPTIMIZE) -DVERSION_STRING=\"$(RPMTOOLSVERSION)\" $< $(LIBRPM) $(INCRPM) $(DEFRPM) -o $@ $(FROMC_STATIC): %_static: %.c - $(CC) -s -static $(CFLAGS) -DVERSION_STRING=\"$(VERSION)\" $< $(LIBRPM) $(LIBRPM_STATIC) -o $@ - -clean: - rm -rf *~ $(ALL) $(ALL_STATIC) - -dis: clean - rm -rf $(NAME)-$(VERSION) ../$(NAME)-$(VERSION).tar* - mkdir -p $(NAME)-$(VERSION) - find . -not -name "$(NAME)-$(VERSION)"|cpio -pd $(NAME)-$(VERSION)/ - find $(NAME)-$(VERSION) -type d -name CVS -o -name .cvsignore -o -name unused |xargs rm -rf - perl -p -i -e 's|^%define version.*|%define version $(VERSION)|' $(NAME).spec - tar cf ../$(NAME)-$(VERSION).tar $(NAME)-$(VERSION) - bzip2 -9f ../$(NAME)-$(VERSION).tar - rm -rf $(NAME)-$(VERSION) - -rpm: dis ../$(NAME)-$(VERSION).tar.bz2 - cp -f ../$(NAME)-$(VERSION).tar.bz2 $(RPM)/SOURCES - cp -f $(NAME).spec $(RPM)/SPECS/ - -rpmbuild -ba --clean --rmsource $(NAME).spec - rm -f ../$(NAME)-$(VERSION).tar.bz2 - -changelog: - cvs2cl -W 400 -I ChangeLog --accum -U ../../soft/common/username + $(CC) -g -s -static $(CCFLAGS) $(OPTIMIZE) -DVERSION_STRING=\"$(RPMTOOLSVERSION)\" $< $(LIBRPM) $(LIBRPM_STATIC) $(INCRPM) $(DEFRPM) -o $@ + +buildc: $(FROMC) $(FROMCC) # $(FROMC_STATIC) $(FROMCC_STATIC) + +cleanc: + rm -f $(FROMC) $(FROMCC) $(FROMC_STATIC) $(FROMCC_STATIC) + +ChangeLog: + cvs2cl -W 400 -I ChangeLog --accum -U ../common/username rm -f *.bak + +rpm: dist + rpm --define "_sourcedir `pwd`" -ba rpmtools.spec + + +# End. diff --git a/Makefile.PL b/Makefile.PL new file mode 100644 index 0000000..289b915 --- /dev/null +++ b/Makefile.PL @@ -0,0 +1,71 @@ +# $Id$ + +# use 5.008; +use ExtUtils::MakeMaker; + +my $rpmtools_version = '5.0'; + +sub MY::postamble { + <<MAKEMAKEFILE; +.PHONY: ChangeLog + +\$(FROMCC): %: %.cc + \$(CXX) \$(CCFLAGS) \$(OPTIMIZE) -DVERSION_STRING=\\"\$(RPMTOOLSVERSION)\\" \$< \$(LIBRPM) \$(INCRPM) \$(DEFRPM) -o \$@ + +\$(FROMCC_STATIC): %_static: %.cc + \$(CXX) -s -static \$(CCFLAGS) \$(OPTIMIZE) -DVERSION_STRING=\\"\$(RPMTOOLSVERSION)\\" \$< \$(LIBRPM) \$(INCRPM) \$(DEFRPM) -o \$@ + +\$(FROMC): %: %.c + \$(CC) \$(CCFLAGS) \$(OPTIMIZE) -DVERSION_STRING=\\"\$(RPMTOOLSVERSION)\\" \$< \$(LIBRPM) \$(INCRPM) \$(DEFRPM) -o \$@ + +\$(FROMC_STATIC): %_static: %.c + \$(CC) -g -s -static \$(CCFLAGS) \$(OPTIMIZE) -DVERSION_STRING=\\"\$(RPMTOOLSVERSION)\\" \$< \$(LIBRPM) \$(LIBRPM_STATIC) \$(INCRPM) \$(DEFRPM) -o \$@ + +buildc: \$(FROMC) \$(FROMCC) # \$(FROMC_STATIC) \$(FROMCC_STATIC) + +cleanc: + rm -f \$(FROMC) \$(FROMCC) \$(FROMC_STATIC) \$(FROMCC_STATIC) + +ChangeLog: + cvs2cl -W 400 -I ChangeLog --accum -U ../common/username + rm -f *.bak + +rpm: dist + rpm --define "_sourcedir `pwd`" -ba rpmtools.spec +MAKEMAKEFILE +} + +WriteMakefile( + NAME => 'rpmtools', + VERSION => $rpmtools_version, + macro => { + RPMTOOLSVERSION => $rpmtools_version, + FROMC => 'parsehdlist rpm2header #rpm-find-leaves', + FROMCC => '#gendepslist2 hdlist2names hdlist2files hdlist2prereq hdlist2groups', + FROMC_STATIC => '$(FROMC:%=%_static)', + FROMCC_STATIC => '$(FROMCC:%=%_static)', + LIBRPM => '-lrpm -lrpmio -lrpmdb -lrpmbuild -lz -lbz2 -lpopt', + INCRPM => '-I/usr/include/rpm', + DEFRPM => '-DRPM_42', + }, + depend => { + clean_subdirs => 'cleanc', + pm_to_blib => 'buildc', + }, + PM => { + 'Packdrakeng.pm' => '$(INST_LIBDIR)/Packdrakeng.pm', + 'packdrake.pm' => '$(INST_LIBDIR)/packdrake.pm', + }, + 'EXE_FILES' => [ qw(gendistrib genhdlist packdrake rpm2header parsehdlist rpm2cpio.pl) ], + C => [], + 'OBJECT' => '', + CCFLAGS => '-Wall', + OPTIMIZE => '-O3 -fomit-frame-pointer -fno-exceptions -pipe -s -ffast-math -fexpensive-optimizations', + INC => '', + LIBS => [ '' ], + INSTALLDIRS => 'vendor', + dist => { + COMPRESS => 'bzip2 --best', + SUFFIX => '.bz2', + }, +); diff --git a/packdrake-pm/Makefile.PL b/packdrake-pm/Makefile.PL deleted file mode 100644 index 71f56ac..0000000 --- a/packdrake-pm/Makefile.PL +++ /dev/null @@ -1,9 +0,0 @@ -use ExtUtils::MakeMaker; -# See lib/ExtUtils/MakeMaker.pm for details of how to influence -# the contents of the Makefile that is written. - -WriteMakefile( - 'NAME' => 'packdrake', - 'VERSION_FROM' => 'packdrake.pm', -); - diff --git a/packdrake-pm/packdrake.pm b/packdrake-pm/packdrake.pm deleted file mode 100644 index 2b66f8a..0000000 --- a/packdrake-pm/packdrake.pm +++ /dev/null @@ -1,515 +0,0 @@ -package packdrake; - -use strict; -use vars qw($VERSION); - -$VERSION = "0.04"; - -=head1 NAME - -packdrake - Simple Archive Extractor/Builder - -=head1 SYNOPSIS - - require packdrake; - - packdrake::cat_archive("/export/media/media_info/hdlist.cz", - "/export/media/media_info/hdlist2.cz"); - packdrake::list_archive("/tmp/modules.cz2"); - - my $packer = new packdrake("/tmp/modules.cz2"); - $packer->extract_archive("/tmp", "file1.o", "file2.o"); - - my $packer = packdrake::build_archive - (\*STDIN, "/lib/modules", "/tmp/modules.cz2", - 400000, "bzip2", "bzip2 -d"); - my $packer = packdrake::build_archive - (\*STDIN, "/export/media/media_info/hdlist.cz", - 400000, "gzip -9", "gzip -d"); - -=head1 DESCRIPTION - -C<packdrake> is a very simple archive extractor and builder used by Mandrakesoft. - -=head1 IMPLEMENTATION - -uncompressing sheme is: - | | - | | | | - $off1 =|*| } | | - |*| } $off2 =|+| } - |*| } $siz1 => 'gzip/bzip2 -d' => |+| } $siz2 => $filename - |*| } |+| } - |*| } | | - | | | | - | | | | - | | -where %data has the following format: - { 'filename' => [ 'f', $off1, $siz1, $off2, $siz2 ] } -except for symbolink link where it is: - { 'filename_symlink' => [ 'l', $symlink_value ] } -and directory where it is only - { 'filename_directory' => [ 'd' ] } -as you can see, there is no owner, group, filemode... an extension could be -made with 'F' (instead of 'f'), 'L' instead of 'l' for exemple. -we do not need them as it is used for DrakX for fast archive extraction and -owner/filemode is for user running only (ie root). - -archive file contains concatenation of all bzip2'ed group of files whose -filenames are on input, -then a TOC (describing %data, concatenation of toc_line) follow and a -TOC_TRAILER for summary. - -=head1 SEE ALSO - -The packdrake command is a simple executable perl script using this module. - -=head1 COPYRIGHT - -Copyright (C) 2000-2004 Mandrakesoft <fpons@mandrakesoft.com> - -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -=cut - -#- taken from DrakX common stuff, for conveniance and modified to match our expectation. -sub dirname { @_ == 1 or die "packdrake: usage: dirname <name>\n"; local $_ = shift; s|[^/]*/*\s*$||; s|(.)/*$|$1|; $_ || '.' } -sub basename { @_ == 1 or die "packdrake: usage: basename <name>\n"; local $_ = shift; s|/*\s*$||; s|.*/||; $_ } -sub mkdir_ { - my $root = dirname $_[0]; - if (-e $root) { - -d $root or die "packdrake: mkdir: error creating directory $_[0]: $root is a file and i won't delete it\n"; - } else { - mkdir_($root); - } - -d $_[0] and return; - mkdir $_[0], 0755 or die "packdrake: mkdir: error creating directory $_[0]: $!\n"; -} -sub symlink_ { mkdir_ dirname($_[1]); unlink $_[1]; symlink $_[0], $_[1] } - -#- for building an archive, returns the string containing the file and data associated. -sub build_toc_line { - my ($file, $data) = @_; - - for ($data->[0]) { - return(/l/ && pack("anna*", 'l', length($file), length($data->[1]), "$file$data->[1]") || - /d/ && pack("ana*", 'd', length($file), $file) || - /f/ && pack("anNNNNa*", 'f', length($file), @$data[1..4], $file) || - die "packdrake: unknown extension $_\n"); - } -} - -sub build_toc_trailer { - my ($packer) = @_; - - #- 'cz[0' is toc_trailer header where 0 is version information, only 0 now. - #- '0]cz' is toc_trailer trailer that match the corresponding header for information. - pack "a4NNNNa40a4", ($packer->{header}, - $packer->{toc_d_count}, $packer->{toc_l_count}, $packer->{toc_f_count}, - $packer->{toc_str_size}, $packer->{uncompress}, - $packer->{trailer}); -} - -#- degraded reading of toc at end of archive, do not check filelist. -sub read_toc_trailer { - my ($packer, $file) = @_; - my $toc_trailer; - - local *ARCHIVE; - open ARCHIVE, "<$file" or die "packdrake: cannot open archive file $file\n"; - $packer->{archive} = $file; - - #- seek to end of file minus 64, size of trailer. - #- read toc_trailer, check header/trailer for version 0. - seek ARCHIVE, -64, 2; - read ARCHIVE, $toc_trailer, 64 or die "packdrake: cannot read toc_trailer of archive file $file\n"; - @$packer{qw(header toc_d_count toc_l_count toc_f_count toc_str_size uncompress trailer)} = - unpack "a4NNNNZ40a4", $toc_trailer; - $packer->{header} eq 'cz[0' && $packer->{trailer} eq '0]cz' or die "packdrake: bad toc_trailer in archive file $file\n"; - - close ARCHIVE; -} - -#- read toc at end of archive. -sub read_toc { - my ($packer, $file) = @_; - my ($toc, $toc_trailer, $toc_size); - my @toc_str; - my @toc_data; - - local *ARCHIVE; - open ARCHIVE, "<$file" or die "packdrake: cannot open archive file $file\n"; - $packer->{archive} = $file; - - #- seek to end of file minus 64, size of trailer. - #- read toc_trailer, check header/trailer for version 0. - seek ARCHIVE, -64, 2; - read ARCHIVE, $toc_trailer, 64 or die "packdrake: cannot read toc_trailer of archive file $file\n"; - @$packer{qw(header toc_d_count toc_l_count toc_f_count toc_str_size uncompress trailer)} = - unpack "a4NNNNZ40a4", $toc_trailer; - $packer->{header} eq 'cz[0' && $packer->{trailer} eq '0]cz' or die "packdrake: bad toc_trailer in archive file $file\n"; - - #- read toc, extract data hashes. - $toc_size = $packer->{toc_str_size} + 16*$packer->{toc_f_count}; - seek ARCHIVE, -64-$toc_size, 2; - - #- read strings separated by \n, so this char cannot be inside filename, oops. - read ARCHIVE, $toc, $packer->{toc_str_size} or die "packdrake: cannot read toc of archive file $file\n"; - @toc_str = split "\n", $toc; - - #- read data for file. - read ARCHIVE, $toc, 16*$packer->{toc_f_count} or die "packdrake: cannot read toc of archive file $file\n"; - @toc_data = unpack "N" . 4*$packer->{toc_f_count}, $toc; - - close ARCHIVE; - - foreach (0..$packer->{toc_d_count}-1) { - my $file = $toc_str[$_]; - push @{$packer->{files}}, $file; - $packer->{data}{$file} = [ 'd' ]; - } - foreach (0..$packer->{toc_l_count}-1) { - my ($file, $symlink) = ($toc_str[$packer->{toc_d_count}+2*$_], - $toc_str[$packer->{toc_d_count}+2*$_+1]); - push @{$packer->{files}}, $file; - $packer->{data}{$file} = [ 'l', $symlink ]; - } - foreach (0..$packer->{toc_f_count}-1) { - my $file = $toc_str[$packer->{toc_d_count}+2*$packer->{toc_l_count}+$_]; - push @{$packer->{files}}, $file; - $packer->{data}{$file} = [ 'f', @toc_data[4*$_ .. 4*$_+3] ]; - } - - scalar keys %{$packer->{data}} == $packer->{toc_d_count}+$packer->{toc_l_count}+$packer->{toc_f_count} or - die "packdrake: mismatch count when reading toc, bad archive file $file\n"; -} - -sub catsksz { - my ($input, $seek, $siz, $output) = @_; - my ($buf, $sz); - - while ($sz = sysread($input, $buf, $seek > 65536 ? 65536 : $seek)) { - $seek -= $sz; - last unless $seek > 0; - } - while ($sz = sysread($input, $buf, $siz > 65536 ? 65536 : $siz)) { - $siz -= $sz; - syswrite($output, $buf); - last unless $siz > 0; - } -} - -sub cat_compress { - my ($packer, $srcdir, @filenames) = @_; - local *F; - open F, "| $ENV{LD_LOADER} $packer->{compress} >$packer->{tmpz}" - or die "packdrake: cannot start \"$packer->{compress}\"\n"; - foreach (@filenames) { - my $srcfile = $srcdir ? "$srcdir/$_" : $_; - my ($buf, $siz, $sz); - local *FILE; - open FILE, $srcfile or die "packdrake: cannot open $srcfile: $!\n"; - $siz = -s $srcfile; - while ($sz = sysread(FILE, $buf, $siz > 65536 ? 65536 : $siz)) { - $siz -= $sz; - syswrite(F, $buf); - last unless $siz > 0; - } - close FILE; - } - close F or die "packdrake: unable to compress data using \"$packer->{compress}\"\n"; - -s $packer->{tmpz}; -} - -#- compute the closure of filename list according to symlinks or directory -#- contents inside the archive. -sub compute_closure { - my $packer = shift; - my %file; - my @file; - - #- keep in mind when a filename already exist and remove doublons. - @file{@_} = (); - - #- navigate through filename list to follow symlinks. - do { - @file = grep { !$file{$_} } keys %file; - foreach (@file) { - my $file = $_; - - #- keep in mind this one has been processed and does not need - #- to be examined again. - $file{$file} = 1; - - exists $packer->{data}{$file} or next; - - for ($packer->{data}{$file}[0]) { - #- on symlink, try to follow it and mark %file if - #- it is still inside the archive contents. - /l/ and do { - my ($source, $target) = ($file, $packer->{data}{$file}[1]); - - $source =~ s|[^/]*$||; #- remove filename to navigate directory. - if ($source) { - while ($target =~ s|^\./|| || $target =~ s|//+|/| || $target =~ s|/$|| or - $source and $target =~ s|^\.\./|| and $source =~ s|[^/]*/$||) {} - } - - #- FALL THROUGH with new selection. - $file = $target =~ m|^/| ? $target : $source.$target; - }; - - #- on directory, try all files on data starting with - #- this directory, provided they are not already taken - #- into account. - /[ld]/ && do { - @file{grep { !$file{$_} && m|^$file$| || m|^$file/| } keys %{$packer->{data}}} = (); - last; - }; - } - } - } while @file > 0; - - keys %file; -} - - -#- getting an packer object. -sub new { - my ($class, $file, %options) = @_; - my $packer = bless { - #- toc trailer data information. - header => 'cz[0', - toc_d_count => 0, - toc_l_count => 0, - toc_f_count => 0, - toc_str_size => 0, - uncompress => 'gzip -d', - trailer => '0]cz', - - #- tempories used for making an archive. - tmpz => ($ENV{TMPDIR} || "/tmp") . "/packdrake-tmp.$$", - compress => 'gzip', - - #- internal data to handle compression or uncompression. - archive => undef, - files => [], - data => {}, - - log => $options{quiet} ? sub {} : sub { printf STDERR "%s\n", $_[0] }, - }, $class; - $file and $packer->read_toc($file); - $packer; -} - -sub cat_archive { - foreach (@_) { - my $packer = new packdrake; - - #- update %data according to TOC_TRAILER of each archive. - $packer->read_toc_trailer($_); - - #- dump all the file according to - if (my $pid = fork()) { - waitpid $pid, 0; - } else { - open STDIN, "<$_" or die "packdrake: unable to open archive $_\n"; - open STDERR, ">/dev/null" or die "packdrake: unable to open /dev/null\n"; - - exec(($ENV{LD_LOADER} ? $ENV{LD_LOADER} : @{[]}), split " ", $packer->{uncompress}); - - die "packdrake: unable to cat the archive with $packer->{uncompress}\n"; - } - } -} - -sub list_archive { - foreach (@_) { - my $packer = new packdrake($_); - my $count = scalar keys %{$packer->{data}}; - - $packer->{log}->("processing archive \"$_\""); - print "$count files in archive, uncompression method is \"$packer->{uncompress}\"\n"; - foreach my $file (@{$packer->{files}}) { - for ($packer->{data}{$file}[0]) { - /l/ and do { printf "l %13c %s -> %s\n", ' ', $file, $packer->{data}{$file}[1]; last }; - /d/ and do { printf "d %13c %s\n", ' ', $file; last }; - /f/ && do { printf "f %12d %s\n", $packer->{data}{$file}[4], $file; last }; - } - } - } -} - -sub extract_archive { - my ($packer, $dir, @file) = @_; - my %extract_table; - - #- compute closure. - @file = $packer->compute_closure(@file); - - foreach my $file (@file) { - #- check for presence of file, but do not abort, continue with others. - unless ($packer->{data}{$file}) { - $packer->{log}->("packdrake: unable to find file $file in archive $packer->{archive}"); - next; - } - - my $newfile = "$dir/$file"; - - $packer->{log}->("extracting $file"); - for ($packer->{data}{$file}[0]) { - /l/ and do { symlink_ $packer->{data}{$file}[1], $newfile; last }; - /d/ and do { $dir and mkdir_ $newfile; last }; - /f/ and do { $dir and mkdir_ dirname $newfile; - my $data = $packer->{data}{$file}; - $extract_table{$data->[1]} ||= [ $data->[2], [] ]; - push @{$extract_table{$data->[1]}[1]}, [ $newfile, $data->[3], $data->[4] ]; - $extract_table{$data->[1]}[0] == $data->[2] or die "packdrake: mismatched relocation in toc\n"; - last; - }; - die "packdrake: unknown extension \"$_\" when uncompressing archive $packer->{archive}\n"; - } - } - - #- delayed extraction is done on each block for a single execution - #- of uncompress executable. - foreach (sort { $a <=> $b } keys %extract_table) { - local *OUTPUT; - if (open OUTPUT, "-|") { - #- $curr_off is used to handle the reading in a pipe and simulating - #- a seek on it as done by catsksz, so last file position is - #- last byte not read (ie last block read start + last block read size). - local *FILE; - my $curr_off = 0; - foreach (sort { $a->[1] <=> $b->[1] } @{$extract_table{$_}[1]}) { - my ($newfile, $off, $siz) = @$_; - open FILE, $dir ? ">$newfile" : ">&STDOUT"; - catsksz(\*OUTPUT, $off - $curr_off, $siz, \*FILE); - $curr_off = $off + $siz; - close FILE; - } - } else { - local *BUNZIP2; - open BUNZIP2, "| $ENV{LD_LOADER} $packer->{uncompress}"; - local *ARCHIVE; - open ARCHIVE, "<$packer->{archive}" or die "packdrake: cannot open archive $packer->{archive}\n"; - catsksz(\*ARCHIVE, $_, $extract_table{$_}[0], \*BUNZIP2); - exec 'true'; #- exit ala _exit - } - } -} - -sub build_archive { - my ($f, $srcdir, $archivename, $maxsiz, $compress, $uncompress, $tmpz) = @_; - my ($off1, $siz1, $off2, $siz2) = (0, 0, 0, 0); - my @filelist; - my $packer = new packdrake; - - $packer->{archive} = $archivename; - $compress && $uncompress and ($packer->{compress}, $packer->{uncompress}) = ($compress, $uncompress); - $tmpz and $packer->{tmpz} = $tmpz; - - $packer->{log}->("choosing compression method with \"$packer->{compress}\" for archive $packer->{archive}"); - - unlink $packer->{archive}; - unlink $packer->{tmpz}; - - my $file; - while ($file = <$f>) { - chomp $file; - my $srcfile = $srcdir ? "$srcdir/$file" : $file; - -e $srcfile or die "packdrake: unable to find file $srcfile\n"; - - push @{$packer->{files}}, $file; - #- now symbolic link and directory are supported, extension is - #- available with the first field of $data{$file}. - if (-l $file) { - $packer->{data}{$file} = [ 'l', readlink $srcfile ]; - } elsif (-d $file) { - $packer->{data}{$file} = [ 'd' ]; - } else { - $siz2 = -s $srcfile; - - push @filelist, $file; - $packer->{data}{$file} = [ 'f', -1, -1, $off2, $siz2 ]; - - if ($off2 + $siz2 > $maxsiz) { #- need compression. - $siz1 = cat_compress($packer, $srcdir, @filelist); - - foreach (@filelist) { - $packer->{data}{$_} = [ 'f', $off1, $siz1, $packer->{data}{$_}[3], $packer->{data}{$_}[4] ]; - } - - system "$ENV{LD_LOADER} cat '$packer->{tmpz}' >>'$packer->{archive}'"; - $off1 += $siz1; - $off2 = 0; $siz2 = 0; - @filelist = (); - } - $off2 += $siz2; - } - } - if (scalar @filelist) { - $siz1 = cat_compress($packer, $srcdir, @filelist); - - foreach (@filelist) { - $packer->{data}{$_} = [ 'f', $off1, $siz1, $packer->{data}{$_}[3], $packer->{data}{$_}[4] ]; - } - - system "$ENV{LD_LOADER} cat '$packer->{tmpz}' >>'$packer->{archive}'"; - $off1 += $siz1; - } - $packer->{log}->("real archive size of $packer->{archive} is $off1"); - - #- produce a TOC directly at the end of the file, follow with - #- a trailer with TOC summary and archive summary. - local *OUTPUT; - open OUTPUT, ">>$packer->{archive}"; - - my ($toc_str, $toc_data) = ('', ''); - my @data_d; - my @data_l; - my @data_f; - - foreach my $file (@{$packer->{files}}) { - $packer->{data}{$file} or die "packdrake: internal error on $file\n"; - - #- specific according to type. - #- with this version, only f has specific data other than strings. - for ($packer->{data}{$file}[0]) { - /d/ and do { push @data_d, $file; last }; - /l/ and do { push @data_l, $file; last }; - /f/ and do { push @data_f, $file; $toc_data .= pack("NNNN", @{$packer->{data}{$file}}[1..4]); last }; - die "packdrake: unknown extension $_\n"; - } - } - - foreach (@data_d) { $toc_str .= $_ . "\n" } - foreach (@data_l) { $toc_str .= $_ . "\n" . $packer->{data}{$_}[1] . "\n" } - foreach (@data_f) { $toc_str .= $_ . "\n" } - - @$packer{qw(toc_d_count toc_l_count toc_f_count toc_str_size uncompress)} = - (scalar(@data_d), scalar(@data_l), scalar(@data_f), length($toc_str), $uncompress); - - print OUTPUT $toc_str; - print OUTPUT $toc_data; - print OUTPUT build_toc_trailer($packer); - close OUTPUT or die "packdrake: unable to build toc trailer of $packer->{archive}\n"; - - unlink $packer->{tmpz}; - - $packer; -} - -1; diff --git a/packdrake.pm b/packdrake.pm new file mode 100644 index 0000000..6ba51c4 --- /dev/null +++ b/packdrake.pm @@ -0,0 +1,173 @@ +##- Nanar <nanardon@mandrake.org> +##- +##- This program is free software; you can redistribute it and/or modify +##- it under the terms of the GNU General Public License as published by +##- the Free Software Foundation; either version 2, or (at your option) +##- any later version. +##- +##- This program is distributed in the hope that it will be useful, +##- but WITHOUT ANY WARRANTY; without even the implied warranty of +##- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +##- GNU General Public License for more details. +##- +##- You should have received a copy of the GNU General Public License +##- along with this program; if not, write to the Free Software +##- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +##- $Id$ + +package packdrake; + +use strict; +use warnings; +use vars qw($VERSION); +use Packdrakeng; +our @ISA = qw(Packdrakeng); + +$VERSION = $Packdrakeng::VERSION; + +sub new { + my ($class, $file, %options) = @_; + my $pack = Packdrakeng->open( + %options, + archive => $file + ) or return undef; + + bless($pack, $class); +} + +sub extract_archive { + my ($pack, $dir, @files) = @_; + print @files; + if (! scalar(@files)) { + my ($d, $f, $l) = $pack->getcontent(); + push(@files, @$d, @$f, @$l); + } + $pack->extract($dir, @files); +} + +sub list_archive { + foreach my $archive (@_) { + my $pack = Packdrakeng->open(archive => $archive) or next; + $pack->list(); + } +} + +sub build_archive { + my ($listh, $dir, $archive, $size, $compress, $uncompress) = @_; + my ($comp_level) = $compress =~ m/ -(\d)(?:\s|$)/; + $compress =~ s/ -\d(\s|$)/$1/; + $uncompress =~ s/ -d(\s|$)/$1/; + my $pack = Packdrakeng->new( + archive => $archive, + compress => $compress, + uncompress => $uncompress, + bloc_size => $size, + comp_level => $comp_level, + ) or return; + while (my $line = <$listh>) { + chomp($line); + $pack->add($dir, $line) or return; + } +} + +sub cat_archive { + foreach my $archive (@_) { + my $pack = Packdrakeng->open(archive => $archive) or next; + (undef, my $files, undef) = $pack->getcontent(); + foreach (@$files) { + $pack->extract_virtual(\*STDOUT, $_); + } + } +} + +1; + +__END__ + +=head1 NAME + +packdrake - Simple Archive Extractor/Builder + +This module is provide for compatibility with old packdrake. + +=head1 SYNOPSIS + + require packdrake; + + packdrake::cat_archive("/export/media/media_info/hdlist.cz", + "/export/media/media_info/hdlist2.cz"); + packdrake::list_archive("/tmp/modules.cz2"); + + my $packer = new packdrake("/tmp/modules.cz2"); + $packer->extract_archive("/tmp", "file1.o", "file2.o"); + + my $packer = packdrake::build_archive + (\*STDIN, "/lib/modules", "/tmp/modules.cz2", + 400000, "bzip2", "bzip2 -d"); + my $packer = packdrake::build_archive + (\*STDIN, "/export/media/media_info/hdlist.cz", + 400000, "gzip -9", "gzip -d"); + +=head1 DESCRIPTION + +C<packdrake> is a very simple archive extractor and builder used by Mandrakesoft. + +=head1 SEE ALSO + +Packdrakeng + +=head1 FUNCTIONS + +=over + +=item B<new($file, %options)> + +Open the packdrake archive $file and return a packdrake object. +Return undef on failure. + +=item B<packdrake->extract_archive($dir, @files)> + +Extract files list into the specified directory. + +=item B<packdrake::list_archive(@list)> + +List files packed into achives given. + +=item B<packdrake::build_archive($input, $dir, $archive, $blocsize, $compress, $uncompress)> + +Build a new archive: +- $input is a file handle to find file list to pack +- $dir is the directory based where file are located +- $archive is the archive filename to create +- $blocsize is the size of compressed bloc +- $compress is the program to use to compress data +- $uncompress is the program to use to uncompress data + +=item B<packdrake::cat_archive(@files)> + +Dump data to STDOUT of files given as parameters, or all files if no files are +specified + +=back + +=head1 COPYRIGHT + +Copyright (C) 2000-2004 Mandrakesoft <nanardon@mandrake.org> + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +=cut + diff --git a/rpmtools.spec b/rpmtools.spec index a3e5944..96ea950 100644 --- a/rpmtools.spec +++ b/rpmtools.spec @@ -1,22 +1,16 @@ %define name rpmtools -%define release 25mdk +%define release 0.1mdk # do not modify here, see Makefile in the CVS -%define version 4.5 +%define version 5.0 %define group %(perl -e 'printf "%%s\\n", "%_vendor" =~ /mandrake/i ? "System/Configuration/Packaging" : "System Environment/Base"') %define rpm_version %(rpm -q --queryformat '%{VERSION}-%{RELEASE}' rpm) -%{expand:%%define rpm_define %%(perl -e 'printf "%%s\\n", ("%rpm_version" =~ /^(?:4\.[2-9]|[5-9]|\d{2})/ ? "-DRPM_42" : "")')} - -%{expand:%%define compat_makeinstall_std %(perl -e 'printf "%%s\n", "%{?makeinstall_std:1}" ? "%%makeinstall_std" : "%%{__make} install PREFIX=%%{buildroot}%%{_prefix}"')} -%{expand:%%define compat_perl_vendorlib %(perl -MConfig -e 'printf "%%s\n", "%{?perl_vendorlib:1}" ? "%%{perl_vendorlib}" : "$Config{installvendorlib}"')} -%{expand:%%define buildreq_perl_devel %%(perl -e 'printf "%%s\\n", "%_vendor" =~ /mandrake/i ? "perl-devel" : "perl"')} -%{expand:%%define real_release %%(perl -e 'printf "%%s\\n", ("%_vendor" !~ /mandrake/i && ("%release" =~ /(.*?)mdk/)[0] || "%release")')} Summary: Contains various rpm command-line tools Name: %{name} Version: %{version} -Release: %{real_release} +Release: %{release} # get the source from our cvs repository (see # http://www.linuxmandrake.com/en/cvs.php3) Source0: %{name}-%{version}.tar.bz2 @@ -25,7 +19,8 @@ Group: %{group} URL: http://cvs.mandrakesoft.com/cgi-bin/cvsweb.cgi/soft/rpmtools BuildRoot: %{_tmppath}/%{name}-buildroot Prefix: %{_prefix} -BuildRequires: %{buildreq_perl_devel} rpm-devel >= 4.0.3 bzip2-devel +BuildRequires: rpm-devel >= 4.0.3 bzip2-devel +BuildRequires: perl-devel Requires: rpm >= %{rpm_version} bzip2 >= 1.0 perl-URPM >= 0.94 perl-base >= 5.8.4 Conflicts: rpmtools-compat <= 2.0 rpmtools-devel <= 2.0 Provides: perl(packdrake) @@ -34,21 +29,16 @@ Provides: perl(packdrake) Various tools needed by urpmi and drakxtools for handling rpm files. %prep -%setup +%setup -q %build -( - cd packdrake-pm ; - %{__perl} Makefile.PL INSTALLDIRS=vendor - %{__make} OPTIMIZE="$RPM_OPT_FLAGS" -) -%{__make} CFLAGS="$RPM_OPT_FLAGS %{rpm_define}" +%{__perl} Makefile.PL INSTALLDIRS=vendor +%make OPTIMIZE="%optflags" +%make test %install %{__rm} -rf %{buildroot} -%{__make} install PREFIX=%{buildroot} -%{compat_makeinstall_std} -C packdrake-pm -%{__rm} -f %{buildroot}%{perl_archlib}/perllocal.pod +%makeinstall_std %clean %{__rm} -rf %{buildroot} @@ -59,10 +49,10 @@ Various tools needed by urpmi and drakxtools for handling rpm files. %{_bindir}/parsehdlist %{_bindir}/rpm2header %{_bindir}/gendistrib -%{_bindir}/distriblint %{_bindir}/genhdlist %{_bindir}/rpm2cpio.pl -%{compat_perl_vendorlib}/packdrake.pm +%{perl_vendorlib}/packdrake.pm +%{perl_vendorlib}/Packdrakeng.pm %{_mandir}/*/* %changelog |