aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--configure.ac2
-rw-r--r--macros.in3
-rw-r--r--rpmrc.in38
3 files changed, 23 insertions, 20 deletions
diff --git a/configure.ac b/configure.ac
index 1bacd27..6452bb5 100644
--- a/configure.ac
+++ b/configure.ac
@@ -4,7 +4,7 @@
# $Id$
AC_PREREQ(2.59)
-AC_INIT(rpm-mandriva-setup, 1.67, nanardon@mandriva.org)
+AC_INIT(rpm-mandriva-setup, 1.68, nanardon@mandriva.org)
AC_CANONICAL_TARGET
AM_INIT_AUTOMAKE(1.9)
AC_CONFIG_SRCDIR
diff --git a/macros.in b/macros.in
index b537db5..a8d91d3 100644
--- a/macros.in
+++ b/macros.in
@@ -86,7 +86,8 @@ Group: %{group}\
%_fortify_cflags -Wp,-D_FORTIFY_SOURCE=2
%_serverbuild_flags %nil
%_ssp_cflags -fstack-protector --param=ssp-buffer-size=4 %{?_serverbuild_flags}
-%__common_cflags -O2 %{debugcflags} -pipe %{?_fortify_cflags} %{?_ssp_cflags} -fexceptions
+%__common_cflags -O2 %{debugcflags} -pipe %{?_fortify_cflags} -fexceptions
+%__common_cflags_with_ssp %{__common_cflags} %{?_ssp_cflags}
#==============================================================================
# ---- Optional rpmrc macros.
diff --git a/rpmrc.in b/rpmrc.in
index 68e793d..a86a1b7 100644
--- a/rpmrc.in
+++ b/rpmrc.in
@@ -5,18 +5,20 @@
#############################################################
# Values for RPM_OPT_FLAGS for various platforms
-optflags: i386 %{__common_cflags} -fomit-frame-pointer -march=i386 -fasynchronous-unwind-tables
-optflags: i486 %{__common_cflags} -fomit-frame-pointer -march=i486 -fasynchronous-unwind-tables
-optflags: k6 %{__common_cflags} -fomit-frame-pointer -march=k6 -fasynchronous-unwind-tables
-optflags: i586 %{__common_cflags} -fomit-frame-pointer -march=i586 -mtune=generic -fasynchronous-unwind-tables
-optflags: i686 %{__common_cflags} -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables
-optflags: athlon %{__common_cflags} -fomit-frame-pointer -march=athlon -fasynchronous-unwind-tables
-optflags: pentium3 %{__common_cflags} -fomit-frame-pointer -march=pentium3 -fasynchronous-unwind-tables
-optflags: pentium4 %{__common_cflags} -fomit-frame-pointer -march=pentium4 -fasynchronous-unwind-tables
+optflags: i386 %{__common_cflags_with_ssp} -fomit-frame-pointer -march=i386 -fasynchronous-unwind-tables
+optflags: i486 %{__common_cflags_with_ssp} -fomit-frame-pointer -march=i486 -fasynchronous-unwind-tables
+optflags: k6 %{__common_cflags_with_ssp} -fomit-frame-pointer -march=k6 -fasynchronous-unwind-tables
+optflags: i586 %{__common_cflags_with_ssp} -fomit-frame-pointer -march=i586 -mtune=generic -fasynchronous-unwind-tables
+optflags: i686 %{__common_cflags_with_ssp} -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables
+optflags: athlon %{__common_cflags_with_ssp} -fomit-frame-pointer -march=athlon -fasynchronous-unwind-tables
+optflags: pentium3 %{__common_cflags_with_ssp} -fomit-frame-pointer -march=pentium3 -fasynchronous-unwind-tables
+optflags: pentium4 %{__common_cflags_with_ssp} -fomit-frame-pointer -march=pentium4 -fasynchronous-unwind-tables
+
+optflags: x86_64 %{__common_cflags_with_ssp}
+optflags: amd64 %{__common_cflags_with_ssp}
+optflags: ia32e %{__common_cflags_with_ssp}
+
optflags: ia64 %{__common_cflags}
-optflags: x86_64 %{__common_cflags}
-optflags: amd64 %{__common_cflags}
-optflags: ia32e %{__common_cflags}
# XXX Please note that -mieee has been added in rpm-3.0.5.
optflags: alpha %{__common_cflags} -mieee -mcpu=ev5
@@ -32,11 +34,11 @@ optflags: sparc64 %{__common_cflags} -m64 -mcpu=ultrasparc
optflags: m68k %{__common_cflags} -fomit-frame-pointer
-optflags: ppc %{__common_cflags} -fsigned-char -mcpu=750 -mtune=7450
-optflags: ppciseries %{__common_cflags} -fsigned-char
-optflags: ppcpseries %{__common_cflags} -fsigned-char
-optflags: ppc32 %{__common_cflags} -m32 -fsigned-char -mcpu=power4 -mtune=cell
-optflags: ppc64 %{__common_cflags} -m64 -fsigned-char -mcpu=power4 -mtune=cell
+optflags: ppc %{__common_cflags_with_ssp} -fsigned-char -mcpu=750 -mtune=7450
+optflags: ppciseries %{__common_cflags_with_ssp} -fsigned-char
+optflags: ppcpseries %{__common_cflags_with_ssp} -fsigned-char
+optflags: ppc32 %{__common_cflags_with_ssp} -m32 -fsigned-char -mcpu=power4 -mtune=cell
+optflags: ppc64 %{__common_cflags_with_ssp} -m64 -fsigned-char -mcpu=power4 -mtune=cell
optflags: parisc %{__common_cflags} -mpa-risc-1-0
optflags: hppa1.0 %{__common_cflags} -mpa-risc-1-0
@@ -59,8 +61,8 @@ optflags: atariclone %{__common_cflags} -fomit-frame-pointer
optflags: milan %{__common_cflags} -fomit-frame-pointer
optflags: hades %{__common_cflags} -fomit-frame-pointer
-optflags: s390 %{__common_cflags}
-optflags: s390x %{__common_cflags}
+optflags: s390 %{__common_cflags_with_ssp}
+optflags: s390x %{__common_cflags_with_ssp}
#############################################################
# Canonical arch names and numbers
8 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746 2747 2748 2749 2750 2751 2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840 2841 2842 2843 2844 2845 2846 2847 2848 2849 2850 2851 2852 2853 2854 2855 2856 2857 2858 2859 2860 2861 2862 2863 2864 2865 2866 2867 2868 2869 2870 2871 2872 2873 2874 2875 2876 2877 2878 2879 2880 2881 2882 2883 2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908 2909 2910 2911 2912 2913 2914 2915 2916 2917 2918 2919 2920 2921 2922 2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933 2934 2935 2936 2937 2938 2939 2940 2941 2942 2943 2944 2945 2946 2947 2948 2949 2950 2951 2952 2953 2954 2955 2956 2957 2958 2959 2960 2961 2962 2963 2964 2965 2966 2967 2968 2969 2970 2971 2972 2973 2974 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2989 2990 2991 2992 2993 2994 2995 2996 2997 2998 2999 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094 3095 3096 3097 3098 3099 3100 3101 3102 3103 3104 3105 3106 3107 3108 3109 3110 3111 3112 3113 3114 3115 3116 3117 3118 3119 3120 3121 3122 3123 3124 3125 3126 3127 3128 3129 3130 3131 3132 3133 3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245 3246 3247 3248 3249 3250 3251 3252 3253 3254 3255 3256 3257 3258 3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315 3316 3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 3329 3330 3331 3332 3333 3334 3335 3336 3337 3338 3339 3340 3341 3342 3343 3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356 3357 3358 3359 3360 3361 3362 3363 3364 3365 3366 3367 3368 3369 3370 3371 3372 3373 3374 3375 3376 3377 3378 3379 3380 3381 3382 3383 3384 3385 3386 3387 3388 3389 3390 3391 3392 3393 3394 3395 3396 3397 3398 3399 3400 3401 3402 3403 3404 3405 3406 3407 3408 3409 3410 3411 3412 3413 3414 3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 3425 3426 3427 3428 3429 3430 3431 3432 3433 3434 3435 3436 3437 3438 3439 3440 3441 3442 3443 3444 3445 3446 3447 3448 3449 3450 3451 3452 3453 3454 3455 3456 3457 3458 3459 3460 3461 3462 3463 3464 3465 3466 3467 3468 3469 3470 3471 3472 3473 3474 3475 3476 3477 3478 3479 3480 3481 3482 3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3496 3497 3498 3499 3500 3501 3502 3503 3504 3505 3506 3507 3508 3509 3510 3511 3512 3513 3514 3515 3516 3517 3518 3519 3520 3521 3522 3523 3524 3525 3526 3527 3528 3529 3530 3531 3532 3533 3534 3535 3536 3537 3538 3539 3540 3541 3542 3543 3544 3545 3546 3547 3548 3549 3550 3551 3552 3553 3554 3555 3556 3557 3558 3559 3560 3561 3562 3563 3564 3565 3566 3567 3568 3569 3570 3571 3572 3573 3574 3575 3576 3577 3578 3579 3580 3581 3582 3583 3584 3585 3586 3587 3588 3589 3590 3591 3592 3593 3594 3595 3596 3597 3598 3599 3600 3601 3602 3603 3604 3605 3606 3607 3608 3609 3610 3611 3612 3613 3614 3615 3616 3617 3618 3619 3620 3621 3622 3623 3624 3625 3626 3627 3628 3629 3630 3631 3632 3633 3634 3635 3636 3637 3638 3639 3640 3641 3642 3643 3644 3645 3646 3647 3648 3649 3650 3651 3652 3653 3654 3655 3656 3657 3658 3659 3660 3661 3662 3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680 3681 3682 3683 3684 3685 3686 3687 3688 3689 3690 3691 3692 3693 3694 3695 3696 3697 3698 3699 3700 3701 3702 3703 3704 3705 3706 3707 3708 3709 3710 3711 3712 3713 3714 3715 3716 3717 3718 3719 3720 3721 3722 3723 3724 3725 3726 3727 3728 3729 3730 3731 3732 3733 3734 3735 3736 3737 3738 3739 3740 3741 3742 3743 3744 3745 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3757 3758 3759 3760 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 3771 3772 3773 3774 3775 3776 3777 3778 3779 3780 3781 3782 3783 3784 3785 3786 3787 3788 3789 3790 3791 3792 3793 3794 3795 3796 3797 3798 3799 3800 3801 3802 3803 3804 3805 3806 3807 3808 3809 3810 3811 3812 3813 3814 3815 3816 3817 3818 3819 3820 3821 3822 3823 3824 3825 3826 3827 3828 3829 3830 3831 3832 3833 3834 3835 3836 3837 3838 3839 3840 3841 3842 3843 3844 3845 3846 3847 3848 3849 3850 3851 3852 3853 3854 3855 3856 3857 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 3880 3881 3882 3883 3884 3885 3886 3887 3888 3889 3890 3891 3892 3893 3894 3895 3896 3897 3898 3899 3900 3901 3902 3903 3904 3905 3906 3907 3908 3909 3910 3911 3912 3913 3914 3915 3916 3917 3918 3919 3920 3921 3922 3923 3924 3925 3926 3927 3928 3929 3930 3931 3932 3933 3934 3935 3936 3937 3938 3939 3940 3941 3942 3943 3944 3945 3946 3947 3948 3949 3950 3951 3952 3953 3954 3955 3956 3957 3958 3959 3960 3961 3962 3963 3964 3965 3966 3967 3968 3969 3970 3971 3972 3973 3974 3975 3976 3977 3978 3979 3980 3981 3982 3983 3984 3985 3986 3987 3988 3989 3990 3991 3992 3993 3994 3995 3996 3997 3998 3999 4000 4001 4002 4003 4004 4005 4006 4007 4008 4009 4010 4011 4012 4013 4014 4015 4016 4017 4018 4019 4020 4021 4022 4023 4024 4025 4026 4027 4028 4029 4030 4031 4032 4033 4034 4035 4036 4037 4038 4039 4040 4041 4042 4043 4044 4045 4046 4047 4048 4049 4050 4051 4052 4053 4054 4055 4056 4057 4058 4059 4060 4061 4062 4063 4064 4065 4066 4067 4068 4069 4070 4071 4072 4073 4074 4075 4076 4077 4078 4079 4080 4081 4082 4083 4084 4085 4086 4087 4088 4089 4090 4091 4092 4093 4094 4095 4096 4097 4098 4099 4100 4101 4102 4103 4104 4105 4106 4107 4108 4109 4110 4111 4112 4113 4114 4115 4116 4117 4118 4119 4120 4121 4122 4123 4124 4125 4126 4127 4128 4129 4130 4131 4132 4133 4134 4135 4136 4137 4138 4139 4140 4141 4142 4143 4144 4145 4146 4147 4148 4149 4150 4151 4152 4153 4154 4155 4156 4157 4158 4159 4160 4161 4162 4163 4164 4165 4166 4167 4168 4169 4170 4171 4172 4173 4174 4175 4176 4177 4178 4179 4180 4181 4182 4183 4184 4185 4186 4187 4188 4189 4190 4191 4192 4193 4194 4195 4196 4197 4198 4199 4200 4201 4202 4203 4204 4205 4206 4207 4208 4209 4210 4211 4212 4213 4214 4215 4216 4217 4218 4219 4220 4221 4222 4223 4224 4225 4226 4227 4228 4229 4230 4231 4232 4233 4234 4235 4236 4237 4238 4239 4240 4241 4242 4243 4244 4245 4246 4247 4248 4249 4250 4251 4252 4253 4254 4255 4256 4257 4258 4259 4260 4261 4262 4263 4264 4265 4266 4267 4268 4269 4270 4271 4272 4273 4274 4275 4276 4277 4278 4279 4280 4281 4282 4283 4284 4285 4286 4287 4288 4289 4290 4291 4292 4293 4294 4295 4296 4297 4298 4299 4300 4301 4302 4303 4304 4305 4306 4307 4308 4309 4310 4311 4312 4313 4314 4315 4316 4317 4318 4319 4320 4321 4322 4323 4324 4325 4326 4327 4328 4329 4330 4331 4332 4333 4334 4335 4336 4337 4338 4339 4340 4341 4342 4343 4344 4345 4346 4347 4348 4349 4350 4351 4352 4353 4354 4355 4356 4357 4358 4359 4360 4361 4362 4363 4364 4365 4366 4367 4368 4369 4370 4371 4372 4373 4374 4375 4376 4377 4378 4379 4380 4381 4382 4383 4384 4385 4386 4387 4388 4389 4390 4391 4392 4393 4394 4395 4396 4397 4398 4399 4400 4401 4402 4403 4404 4405 4406 4407 4408 4409 4410 4411 4412 4413 4414 4415 4416 4417 4418 4419 4420 4421 4422 4423 4424 4425 4426 4427 4428 4429 4430 4431 4432 4433 4434 4435 4436 4437 4438 4439 4440 4441 4442 4443 4444 4445 4446 4447 4448 4449 4450 4451 4452 4453 4454 4455 4456 4457 4458 4459 4460 4461 4462 4463 4464 4465 4466 4467 4468 4469 4470 4471 4472 4473 4474 4475 4476 4477 4478 4479 4480 4481 4482 4483 4484 4485 4486 4487 4488 4489 4490 4491 4492 4493 4494 4495 4496 4497 4498 4499 4500 4501 4502 4503 4504 4505 4506 4507 4508 4509 4510 4511 4512 4513 4514 4515 4516 4517 4518 4519 4520 4521 4522 4523 4524 4525 4526 4527 4528 4529 4530 4531 4532 4533 4534 4535 4536 4537 4538 4539 4540 4541 4542 4543 4544 4545 4546 4547 4548 4549 4550 4551 4552 4553 4554 4555 4556 4557 4558 4559 4560 4561 4562 4563 4564 4565 4566 4567 4568 4569 4570 4571 4572 4573 4574 4575 4576 4577 4578 4579 4580 4581 4582 4583 4584 4585 4586 4587 4588 4589 4590 4591 4592 4593 4594 4595 4596 4597 4598 4599 4600 4601 4602 4603 4604 4605 4606 4607 4608 4609 4610 4611 4612 4613 4614 4615 4616 4617 4618 4619 4620 4621 4622 4623 4624 4625 4626 4627 4628 4629 4630 4631 4632 4633 4634 4635 4636 4637 4638 4639 4640 4641 4642 4643 4644 4645 4646 4647 4648 4649 4650 4651 4652 4653 4654 4655 4656 4657 4658 4659 4660 4661 4662 4663 4664 4665 4666 4667 4668 4669 4670 4671 4672 4673 4674 4675 4676 4677 4678 4679 4680 4681 4682 4683 4684 4685 4686 4687 4688 4689 4690 4691 4692 4693 4694 4695 4696 4697 4698 4699 4700 4701 4702 4703 4704 4705 4706 4707 4708 4709 4710 4711 4712 4713 4714 4715 4716 4717 4718 4719 4720 4721 4722 4723 4724 4725 4726 4727 4728 4729 4730 4731 4732 4733 4734 4735 4736 4737 4738 4739 4740 4741 4742 4743 4744 4745 4746 4747 4748 4749 4750 4751 4752 4753 4754 4755 4756 4757 4758 4759 4760 4761 4762 4763 4764 4765 4766 4767 4768 4769 4770 4771 4772 4773 4774 4775 4776 4777 4778 4779 4780 4781 4782 4783 4784 4785 4786 4787 4788 4789 4790 4791 4792 4793 4794 4795 4796 4797 4798 4799 4800 4801 4802 4803 4804 4805 4806 4807 4808 4809 4810 4811 4812 4813 4814 4815 4816 4817 4818 4819 4820 4821 4822 4823 4824 4825 4826 4827 4828 4829 4830 4831 4832 4833 4834 4835 4836 4837 4838 4839 4840 4841 4842 4843 4844 4845 4846 4847 4848 4849 4850 4851 4852 4853 4854 4855 4856 4857 4858 4859 4860 4861 4862 4863 4864 4865 4866 4867 4868 4869 4870 4871 4872 4873 4874 4875 4876 4877 4878 4879 4880 4881 4882 4883 4884 4885 4886 4887 4888 4889 4890 4891 4892 4893 4894 4895 4896 4897 4898 4899 4900 4901 4902 4903 4904 4905 4906 4907 4908 4909 4910 4911 4912 4913 4914 4915 4916 4917 4918 4919 4920 4921 4922 4923 4924 4925 4926 4927 4928 4929 4930 4931 4932 4933 4934 4935 4936 4937 4938 4939 4940 4941 4942 4943 4944 4945 4946 4947 4948 4949 4950 4951 4952 4953 4954 4955 4956 4957 4958 4959 4960 4961 4962 4963 4964 4965 4966 4967 4968 4969 4970 4971 4972 4973 4974 4975 4976 4977 4978 4979 4980 4981 4982 4983 4984 4985 4986 4987 4988 4989 4990 4991 4992 4993 4994 4995 4996 4997 4998 4999 5000 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 5012 5013 5014 5015 5016 5017 5018 5019 5020 5021 5022 5023 5024 5025 5026 5027 5028 5029 5030 5031 5032 5033 5034 5035 5036 5037 5038 5039 5040 5041 5042 5043 5044 5045 5046 5047 5048 5049 5050 5051 5052 5053 5054 5055 5056 5057 5058 5059 5060 5061 5062 5063 5064 5065 5066 5067 5068 5069 5070 5071 5072 5073 5074 5075 5076 5077 5078 5079 5080 5081 5082 5083 5084 5085 5086 5087 5088 5089 5090 5091 5092 5093 5094 5095 5096 5097 5098 5099 5100 5101 5102 5103 5104 5105 5106 5107 5108 5109 5110 5111 5112 5113 5114 5115 5116 5117 5118 5119 5120 5121 5122 5123 5124 5125 5126 5127 5128 5129 5130 5131 5132 5133 5134 5135 5136 5137 5138 5139 5140 5141 5142 5143 5144 5145 5146 5147 5148 5149 5150 5151 5152 5153 5154 5155 5156 5157 5158 5159 5160 5161 5162 5163 5164 5165 5166 5167 5168 5169 5170 5171 5172 5173 5174 5175 5176 5177 5178 5179 5180 5181 5182 5183 5184 5185 5186 5187 5188 5189 5190 5191 5192 5193 5194 5195 5196 5197 5198 5199 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215 5216 5217 5218 5219 5220 5221 5222 5223 5224 5225 5226 5227 5228 5229 5230 5231 5232 5233 5234 5235 5236 5237 5238 5239 5240 5241 5242 5243 5244 5245 5246 5247 5248 5249 5250 5251 5252 5253 5254 5255 5256 5257 5258 5259 5260 5261 5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5280 5281 5282 5283 5284 5285 5286 5287 5288 5289 5290 5291 5292 5293 5294 5295 5296 5297 5298 5299 5300 5301 5302 5303 5304 5305 5306 5307 5308 5309 5310 5311 5312 5313 5314 5315 5316 5317 5318 5319 5320 5321 5322 5323 5324 5325 5326 5327 5328 5329 5330 5331 5332 5333 5334 5335 5336 5337 5338 5339 5340 5341 5342 5343 5344 5345 5346 5347 5348 5349 5350 5351 5352 5353 5354 5355 5356 5357 5358 5359 5360 5361 5362 5363 5364 5365 5366 5367 5368 5369 5370 5371 5372 5373 5374 5375 5376 5377 5378 5379 5380 5381 5382 5383 5384 5385 5386 5387 5388 5389 5390 5391 5392 5393 5394 5395 5396 5397 5398 5399 5400 5401 5402 5403 5404 5405 5406 5407 5408 5409 5410 5411 5412 5413 5414 5415 5416 5417 5418 5419 5420 5421 5422 5423 5424 5425 5426 5427 5428 5429 5430 5431 5432 5433 5434 5435 5436 5437 5438 5439 5440 5441 5442 5443 5444 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 5455 5456 5457 5458 5459 5460 5461 5462 5463 5464 5465 5466 5467 5468 5469 5470 5471 5472 5473 5474 5475 5476 5477 5478 5479 5480 5481 5482 5483 5484 5485 5486 5487 5488 5489 5490 5491 5492 5493 5494 5495 5496 5497 5498 5499 5500 5501 5502 5503 5504 5505 5506 5507 5508 5509 5510 5511 5512 5513 5514 5515 5516 5517 5518 5519 5520 5521 5522 5523 5524 5525 5526 5527 5528 5529 5530 5531 5532 5533 5534 5535 5536 5537 5538 5539 5540 5541 5542 5543 5544 5545 5546 5547 5548 5549 5550 5551 5552 5553 5554 5555 5556 5557 5558 5559 5560 5561 5562 5563 5564 5565 5566 5567 5568 5569 5570 5571 5572 5573 5574 5575 5576 5577 5578 5579 5580 5581 5582 5583 5584 5585 5586 5587 5588 5589 5590 5591 5592 5593 5594 5595 5596 5597 5598 5599 5600 5601 5602 5603 5604 5605 5606 5607 5608 5609 5610 5611 5612 5613 5614 5615 5616 5617 5618 5619 5620 5621 5622 5623 5624 5625 5626 5627 5628 5629 5630 5631 5632 5633 5634 5635 5636 5637 5638 5639 5640 5641 5642 5643 5644 5645 5646 5647 5648 5649 5650 5651 5652 5653 5654 5655 5656 5657 5658 5659 5660 5661 5662 5663 5664 5665 5666 5667 5668 5669 5670 5671 5672 5673 5674 5675 5676 5677 5678 5679 5680 5681 5682 5683 5684 5685 5686 5687 5688 5689 5690 5691 5692 5693 5694 5695 5696 5697 5698 5699 5700 5701 5702 5703 5704 5705 5706 5707 5708 5709 5710 5711 5712 5713 5714 5715 5716 5717 5718 5719 5720 5721 5722 5723 5724 5725 5726 5727 5728 5729 5730 5731 5732 5733 5734 5735 5736 5737 5738 5739 5740 5741 5742 5743 5744 5745 5746 5747 5748 5749 5750 5751 5752 5753 5754 5755 5756 5757 5758 5759 5760 5761 5762 5763 5764 5765 5766 5767 5768 5769 5770 5771 5772 5773 5774 5775 5776 5777 5778 5779 5780 5781 5782 5783 5784 5785 5786 5787 5788 5789 5790 5791 5792 5793 5794 5795 5796 5797 5798 5799 5800 5801 5802 5803 5804 5805 5806 5807 5808 5809 5810 5811 5812 5813 5814 5815 5816 5817 5818 5819 5820 5821 5822 5823 5824 5825 5826 5827 5828 5829 5830 5831 5832 5833 5834 5835 5836 5837 5838 5839 5840 5841 5842 5843 5844 5845 5846 5847 5848 5849 5850 5851 5852 5853 5854 5855 5856 5857 5858 5859 5860 5861 5862 5863 5864 5865 5866 5867 5868 5869 5870 5871 5872 5873 5874 5875 5876 5877 5878 5879 5880 5881 5882 5883 5884 5885 5886 5887 5888 5889 5890 5891 5892 5893 5894 5895 5896 5897 5898 5899 5900 5901 5902 5903 5904 5905 5906 5907 5908 5909 5910 5911 5912 5913 5914 5915 5916 5917 5918 5919 5920 5921 5922 5923 5924 5925 5926 5927 5928 5929 5930 5931 5932 5933 5934 5935 5936 5937 5938 5939 5940 5941 5942 5943 5944 5945 5946 5947 5948 5949 5950 5951 5952 5953 5954 5955 5956 5957 5958 5959 5960 5961 5962 5963 5964 5965 5966 5967 5968 5969 5970 5971 5972 5973 5974 5975 5976 5977 5978 5979 5980 5981 5982 5983 5984 5985 5986 5987 5988 5989 5990 5991 5992 5993 5994 5995 5996 5997 5998 5999 6000 6001 6002 6003 6004 6005 6006 6007 6008 6009 6010 6011 6012 6013 6014 6015 6016 6017 6018 6019 6020 6021 6022 6023 6024 6025 6026 6027 6028 6029 6030 6031 6032 6033 6034 6035 6036 6037 6038 6039 6040 6041 6042 6043 6044 6045 6046 6047 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 6059 6060 6061 6062 6063 6064 6065 6066 6067 6068 6069 6070 6071 6072 6073 6074 6075 6076 6077 6078 6079 6080 6081 6082 6083 6084 6085 6086 6087 6088 6089 6090 6091 6092 6093 6094 6095 6096 6097 6098 6099 6100 6101 6102 6103 6104 6105 6106 6107 6108 6109 6110 6111 6112 6113 6114 6115 6116 6117 6118 6119 6120 6121 6122 6123 6124 6125 6126 6127 6128 6129 6130 6131 6132 6133 6134 6135 6136 6137 6138 6139 6140 6141 6142 6143 6144 6145 6146 6147 6148 6149 6150 6151 6152 6153 6154 6155 6156 6157 6158 6159 6160 6161 6162 6163 6164 6165 6166 6167 6168 6169 6170 6171 6172 6173 6174 6175 6176 6177 6178 6179 6180 6181 6182 6183 6184 6185 6186 6187 6188 6189 6190 6191 6192 6193 6194 6195 6196 6197 6198 6199 6200 6201 6202 6203 6204 6205 6206 6207 6208 6209 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 6221 6222 6223 6224 6225 6226 6227 6228 6229 6230 6231 6232 6233 6234 6235 6236 6237 6238 6239 6240 6241 6242 6243 6244 6245 6246 6247 6248 6249 6250 6251 6252 6253 6254 6255 6256 6257 6258 6259 6260 6261 6262 6263 6264 6265 6266 6267 6268 6269 6270 6271 6272 6273 6274 6275 6276 6277 6278 6279 6280 6281 6282 6283 6284 6285 6286 6287 6288 6289 6290 6291 6292 6293 6294 6295 6296 6297 6298 6299 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6312 6313 6314 6315 6316 6317 6318 6319 6320 6321 6322 6323 6324 6325 6326 6327 6328 6329 6330 6331 6332 6333 6334 6335 6336 6337 6338 6339 6340 6341 6342 6343 6344 6345 6346 6347 6348 6349 6350 6351 6352 6353 6354 6355 6356 6357 6358 6359 6360 6361 6362 6363 6364 6365 6366 6367 6368 6369 6370 6371 6372 6373 6374 6375 6376 6377 6378 6379 6380 6381 6382 6383 6384 6385 6386 6387 6388 6389 6390 6391 6392 6393 6394 6395 6396 6397 6398 6399 6400 6401 6402 6403 6404 6405 6406 6407 6408 6409 6410 6411 6412 6413 6414 6415 6416 6417 6418 6419 6420 6421 6422 6423 6424 6425 6426 6427 6428 6429 6430 6431 6432 6433 6434 6435 6436 6437 6438 6439 6440 6441 6442 6443 6444 6445 6446 6447 6448 6449 6450 6451 6452 6453 6454 6455 6456 6457 6458 6459 6460 6461 6462 6463 6464 6465 6466 6467 6468 6469 6470 6471 6472 6473 6474 6475 6476 6477 6478 6479 6480 6481 6482 6483 6484 6485 6486 6487 6488 6489 6490 6491 6492 6493 6494 6495 6496 6497 6498 6499 6500 6501 6502 6503 6504 6505 6506 6507 6508 6509 6510 6511 6512 6513 6514 6515 6516 6517 6518 6519 6520 6521 6522 6523 6524 6525 6526 6527 6528 6529 6530 6531 6532 6533 6534 6535 6536 6537 6538 6539 6540 6541 6542 6543 6544 6545 6546 6547 6548 6549 6550 6551 6552 6553 6554 6555 6556 6557 6558 6559 6560 6561 6562 6563 6564 6565 6566 6567 6568 6569 6570 6571 6572 6573 6574 6575 6576 6577 6578 6579 6580 6581 6582 6583 6584 6585 6586 6587 6588 6589 6590 6591 6592 6593 6594 6595 6596 6597 6598 6599 6600 6601 6602 6603 6604 6605 6606 6607 6608 6609 6610 6611 6612 6613 6614 6615 6616 6617 6618 6619 6620 6621 6622 6623 6624 6625 6626 6627 6628 6629 6630 6631 6632 6633 6634 6635 6636 6637 6638 6639 6640 6641 6642 6643 6644 6645 6646 6647 6648 6649 6650 6651 6652 6653 6654 6655 6656 6657 6658 6659 6660 6661 6662 6663 6664 6665 6666 6667 6668 6669 6670 6671 6672 6673 6674 6675 6676 6677 6678 6679 6680 6681 6682 6683 6684 6685 6686 6687 6688 6689 6690 6691 6692 6693 6694 6695 6696 6697 6698 6699 6700 6701 6702 6703 6704 6705 6706 6707 6708 6709 6710 6711 6712 6713 6714 6715 6716 6717 6718 6719 6720 6721 6722 6723 6724 6725 6726 6727 6728 6729 6730 6731 6732 6733 6734 6735 6736 6737 6738 6739 6740 6741 6742 6743 6744 6745 6746 6747 6748 6749 6750 6751 6752 6753 6754 6755 6756 6757 6758 6759 6760 6761 6762 6763 6764 6765 6766 6767 6768 6769 6770 6771 6772 6773 6774 6775 6776 6777 6778 6779 6780 6781 6782 6783 6784 6785 6786 6787 6788 6789 6790 6791 6792 6793 6794 6795 6796 6797 6798 6799 6800 6801 6802 6803 6804 6805 6806 6807 6808 6809 6810 6811 6812 6813 6814 6815 6816 6817 6818 6819 6820 6821 6822 6823 6824 6825 6826 6827 6828 6829 6830 6831 6832 6833 6834 6835 6836 6837 6838 6839 6840 6841 6842 6843 6844 6845 6846 6847 6848 6849 6850 6851 6852 6853 6854 6855 6856 6857 6858 6859 6860 6861 6862 6863 6864 6865 6866 6867 6868 6869 6870 6871 6872 6873 6874 6875 6876 6877 6878 6879 6880 6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900 6901 6902 6903 6904 6905 6906 6907 6908 6909 6910 6911 6912 6913 6914 6915 6916 6917 6918 6919 6920 6921 6922 6923 6924 6925 6926 6927 6928 6929 6930 6931 6932 6933 6934 6935 6936 6937 6938 6939 6940 6941 6942 6943 6944 6945 6946 6947 6948 6949 6950 6951 6952 6953 6954 6955 6956 6957 6958 6959 6960 6961 6962 6963 6964 6965 6966 6967 6968 6969 6970 6971 6972 6973 6974 6975 6976 6977 6978 6979 6980 6981 6982 6983 6984 6985 6986 6987 6988 6989 6990 6991 6992 6993 6994 6995 6996 6997 6998 6999 7000 7001 7002 7003 7004 7005 7006 7007 7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 7018 7019 7020 7021 7022 7023 7024 7025 7026 7027 7028 7029 7030 7031 7032 7033 7034 7035 7036 7037 7038 7039 7040 7041 7042 7043 7044 7045 7046 7047 7048 7049 7050 7051 7052 7053 7054 7055 7056 7057 7058 7059 7060 7061 7062 7063 7064 7065 7066 7067 7068 7069 7070 7071 7072 7073 7074 7075 7076 7077 7078 7079 7080 7081 7082 7083 7084 7085 7086 7087 7088 7089 7090 7091 7092 7093 7094 7095 7096 7097 7098 7099 7100 7101 7102 7103 7104 7105 7106 7107 7108 7109 7110 7111 7112 7113 7114 7115 7116 7117 7118 7119 7120 7121 7122 7123 7124 7125 7126 7127 7128 7129 7130 7131 7132 7133 7134 7135 7136 7137 7138 7139 7140 7141 7142 7143 7144 7145 7146 7147 7148 7149 7150 7151 7152 7153 7154 7155 7156 7157 7158 7159 7160 7161 7162 7163 7164 7165 7166 7167 7168 7169 7170 7171 7172 7173 7174 7175 7176 7177 7178 7179 7180 7181 7182 7183 7184 7185 7186 7187 7188 7189 7190 7191 7192 7193 7194 7195 7196 7197 7198 7199 7200 7201 7202 7203 7204 7205 7206 7207 7208 7209 7210 7211 7212 7213 7214 7215 7216 7217 7218 7219 7220 7221 7222 7223 7224 7225 7226 7227 7228 7229 7230 7231 7232 7233 7234 7235 7236 7237 7238 7239 7240 7241 7242 7243 7244 7245 7246 7247 7248 7249 7250 7251 7252 7253 7254 7255 7256 7257 7258 7259 7260 7261 7262 7263 7264 7265 7266 7267 7268 7269 7270 7271 7272 7273 7274 7275 7276 7277 7278 7279 7280 7281 7282 7283 7284 7285 7286 7287 7288 7289 7290 7291 7292 7293 7294 7295 7296 7297 7298 7299 7300 7301 7302 7303 7304 7305 7306 7307 7308 7309 7310 7311 7312 7313 7314 7315 7316 7317 7318 7319 7320 7321 7322 7323 7324 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7335 7336 7337 7338 7339 7340 7341 7342 7343 7344 7345 7346 7347 7348 7349 7350 7351 7352 7353 7354 7355 7356 7357 7358 7359 7360 7361 7362 7363 7364 7365 7366 7367 7368 7369 7370 7371 7372 7373 7374 7375 7376 7377 7378 7379 7380 7381 7382 7383 7384 7385 7386 7387 7388 7389 7390 7391 7392 7393 7394 7395 7396 7397 7398 7399 7400 7401 7402 7403 7404 7405 7406 7407 7408 7409 7410 7411 7412 7413 7414 7415 7416 7417 7418 7419 7420 7421 7422 7423 7424 7425 7426 7427 7428 7429 7430 7431 7432 7433 7434 7435 7436 7437 7438 7439 7440 7441 7442 7443 7444 7445 7446 7447 7448 7449 7450 7451 7452 7453 7454 7455 7456 7457 7458 7459 7460 7461 7462 7463 7464 7465 7466 7467 7468 7469 7470 7471 7472 7473 7474 7475 7476 7477 7478 7479 7480 7481 7482 7483 7484 7485 7486 7487 7488 7489 7490 7491 7492 7493 7494 7495 7496 7497 7498 7499 7500 7501 7502 7503 7504 7505 7506 7507 7508 7509 7510 7511 7512 7513 7514 7515 7516 7517 7518 7519 7520 7521 7522 7523 7524 7525 7526 7527 7528 7529 7530 7531 7532 7533 7534 7535 7536 7537 7538 7539 7540 7541 7542 7543 7544 7545 7546 7547 7548 7549 7550 7551 7552 7553 7554 7555 7556 7557 7558 7559 7560 7561 7562 7563 7564 7565 7566 7567 7568 7569 7570 7571 7572 7573 7574 7575 7576 7577 7578 7579 7580 7581 7582 7583 7584 7585 7586 7587 7588 7589 7590 7591 7592 7593 7594 7595 7596 7597 7598 7599 7600 7601 7602 7603 7604 7605 7606 7607 7608 7609 7610 7611 7612 7613 7614 7615 7616 7617 7618 7619 7620 7621 7622 7623 7624 7625 7626 7627 7628 7629 7630 7631 7632 7633 7634 7635 7636 7637 7638 7639 7640 7641 7642 7643 7644 7645 7646 7647 7648 7649 7650 7651 7652 7653 7654 7655 7656 7657 7658 7659 7660 7661 7662 7663 7664 7665 7666 7667 7668 7669 7670 7671 7672 7673 7674 7675 7676 7677 7678 7679 7680 7681 7682 7683 7684 7685 7686 7687 7688 7689 7690 7691 7692 7693 7694 7695 7696 7697 7698 7699 7700 7701 7702 7703 7704 7705 7706 7707 7708 7709 7710 7711 7712 7713 7714 7715 7716 7717 7718 7719 7720 7721 7722 7723 7724 7725 7726 7727 7728 7729 7730 7731 7732 7733 7734 7735 7736 7737 7738 7739 7740 7741 7742 7743 7744 7745 7746 7747 7748 7749 7750 7751 7752 7753 7754 7755 7756 7757 7758 7759 7760 7761 7762 7763 7764 7765 7766 7767 7768 7769 7770 7771 7772 7773 7774 7775 7776 7777 7778 7779 7780 7781 7782 7783 7784 7785 7786 7787 7788 7789 7790 7791 7792 7793 7794 7795 7796 7797 7798 7799 7800 7801 7802 7803 7804 7805 7806 7807 7808 7809 7810 7811 7812 7813 7814 7815 7816 7817 7818 7819 7820 7821 7822 7823 7824 7825 7826 7827 7828 7829 7830 7831 7832 7833 7834 7835 7836 7837 7838 7839 7840 7841 7842 7843 7844 7845 7846 7847 7848 7849 7850 7851 7852 7853 7854 7855 7856 7857 7858 7859 7860 7861 7862 7863 7864 7865 7866 7867 7868 7869 7870 7871 7872 7873 7874 7875 7876 7877 7878 7879 7880 7881 7882 7883 7884 7885 7886 7887 7888 7889 7890 7891 7892 7893 7894 7895 7896 7897 7898 7899 7900 7901 7902 7903 7904 7905 7906 7907 7908 7909 7910 7911 7912 7913 7914 7915 7916 7917 7918 7919 7920 7921 7922 7923 7924 7925 7926 7927 7928 7929 7930 7931 7932 7933 7934 7935 7936 7937 7938 7939 7940 7941 7942 7943 7944 7945 7946 7947 7948 7949 7950 7951 7952 7953 7954 7955 7956 7957 7958 7959 7960 7961 7962 7963 7964 7965 7966 7967 7968 7969 7970 7971 7972 7973 7974 7975 7976 7977 7978 7979 7980 7981 7982 7983 7984 7985 7986 7987 7988 7989 7990 7991 7992 7993 7994 7995 7996 7997 7998 7999 8000 8001 8002 8003 8004 8005 8006 8007 8008 8009 8010 8011 8012 8013 8014 8015 8016 8017 8018 8019 8020 8021 8022 8023 8024 8025 8026 8027 8028 8029 8030 8031 8032 8033 8034 8035 8036 8037 8038 8039 8040 8041 8042 8043 8044 8045 8046 8047 8048 8049 8050 8051 8052 8053 8054 8055 8056 8057 8058 8059 8060 8061 8062 8063 8064 8065 8066 8067 8068 8069 8070 8071 8072 8073 8074 8075 8076 8077 8078 8079 8080 8081 8082 8083 8084 8085 8086 8087 8088 8089 8090 8091 8092 8093 8094 8095 8096 8097 8098 8099 8100 8101 8102 8103 8104 8105 8106 8107 8108 8109 8110 8111 8112 8113 8114 8115 8116 8117 8118 8119 8120 8121 8122 8123 8124 8125 8126 8127 8128 8129 8130 8131 8132 8133 8134 8135 8136 8137 8138 8139 8140 8141 8142 8143 8144 8145 8146 8147 8148 8149 8150 8151 8152 8153 8154 8155 8156 8157 8158 8159 8160 8161 8162 8163 8164 8165 8166 8167 8168 8169 8170 8171 8172 8173 8174 8175 8176 8177 8178 8179 8180 8181 8182 8183 8184 8185 8186 8187 8188 8189 8190 8191 8192 8193 8194 8195 8196 8197 8198 8199 8200 8201 8202 8203 8204 8205 8206 8207 8208 8209 8210 8211 8212 8213 8214 8215 8216 8217 8218 8219 8220 8221 8222 8223 8224 8225 8226 8227 8228 8229 8230 8231 8232 8233 8234 8235 8236 8237 8238 8239 8240 8241 8242 8243 8244 8245 8246 8247 8248 8249 8250 8251 8252 8253 8254 8255 8256 8257 8258 8259 8260 8261 8262 8263 8264 8265 8266 8267 8268 8269 8270 8271 8272 8273 8274 8275 8276 8277 8278 8279 8280 8281 8282 8283 8284 8285 8286 8287 8288 8289 8290 8291 8292 8293 8294 8295 8296 8297 8298 8299 8300 8301 8302 8303 8304 8305 8306 8307 8308 8309 8310 8311 8312 8313 8314 8315 8316 8317 8318 8319 8320 8321 8322 8323 8324 8325 8326 8327 8328 8329 8330 8331 8332 8333 8334 8335 8336 8337 8338 8339 8340 8341 8342 8343 8344 8345 8346 8347 8348 8349 8350 8351 8352 8353 8354 8355 8356 8357 8358 8359 8360 8361 8362 8363 8364 8365 8366 8367 8368 8369 8370 8371 8372 8373 8374 8375 8376 8377 8378 8379 8380 8381 8382 8383 8384 8385 8386 8387 8388 8389 8390 8391 8392 8393 8394 8395 8396 8397 8398 8399 8400 8401 8402 8403 8404 8405 8406 8407 8408 8409 8410 8411 8412 8413 8414 8415 8416 8417 8418 8419 8420 8421 8422 8423 8424 8425 8426 8427 8428 8429 8430 8431 8432 8433 8434 8435 8436 8437 8438 8439 8440 8441 8442 8443 8444 8445 8446 8447 8448 8449 8450 8451 8452 8453 8454 8455 8456 8457 8458 8459 8460 8461 8462 8463 8464 8465 8466 8467 8468 8469 8470 8471 8472 8473 8474 8475 8476 8477 8478 8479 8480 8481 8482 8483 8484 8485 8486 8487 8488 8489 8490 8491 8492 8493 8494 8495 8496 8497 8498 8499 8500 8501 8502 8503 8504 8505 8506 8507 8508 8509 8510 8511 8512 8513 8514 8515 8516 8517 8518 8519 8520 8521 8522 8523 8524 8525 8526 8527 8528 8529 8530 8531 8532 8533 8534 8535 8536 8537 8538 8539 8540 8541 8542 8543 8544 8545 8546 8547 8548 8549 8550 8551 8552 8553 8554 8555 8556 8557 8558 8559 8560 8561 8562 8563 8564 8565 8566 8567 8568 8569 8570 8571 8572 8573 8574 8575 8576 8577 8578 8579 8580 8581 8582 8583 8584 8585 8586 8587 8588 8589 8590 8591 8592 8593 8594 8595 8596 8597 8598 8599 8600 8601 8602 8603 8604 8605 8606 8607 8608 8609 8610 8611 8612 8613 8614 8615 8616 8617 8618 8619 8620 8621 8622 8623 8624 8625 8626 8627 8628 8629 8630 8631 8632 8633 8634 8635 8636 8637 8638 8639 8640 8641 8642 8643 8644 8645 8646 8647 8648 8649 8650 8651 8652 8653 8654 8655 8656 8657 8658 8659 8660 8661 8662 8663 8664 8665 8666 8667 8668 8669 8670 8671 8672 8673 8674 8675 8676 8677 8678 8679 8680 8681 8682 8683 8684 8685 8686 8687 8688 8689 8690 8691 8692 8693 8694 8695 8696 8697 8698 8699 8700 8701 8702 8703 8704 8705 8706 8707 8708 8709 8710 8711 8712 8713 8714 8715 8716 8717 8718 8719 8720 8721 8722 8723 8724 8725 8726 8727 8728 8729 8730 8731 8732 8733 8734 8735 8736 8737 8738 8739 8740 8741 8742 8743 8744 8745 8746 8747 8748 8749 8750 8751 8752 8753 8754 8755 8756 8757 8758 8759 8760 8761 8762 8763 8764 8765 8766 8767 8768 8769 8770 8771 8772 8773 8774 8775 8776 8777 8778 8779 8780 8781 8782 8783 8784 8785 8786 8787 8788 8789 8790 8791 8792 8793 8794 8795 8796 8797 8798 8799 8800 8801 8802 8803 8804 8805 8806 8807 8808 8809 8810 8811 8812 8813 8814 8815 8816 8817 8818 8819 8820 8821 8822 8823 8824 8825 8826 8827 8828 8829 8830 8831 8832 8833 8834 8835 8836 8837 8838 8839 8840 8841 8842 8843 8844 8845 8846 8847 8848 8849 8850 8851 8852 8853 8854 8855 8856 8857 8858 8859 8860 8861 8862 8863 8864 8865 8866 8867 8868 8869 8870 8871 8872 8873 8874 8875 8876 8877 8878 8879 8880 8881 8882 8883 8884 8885 8886 8887 8888 8889 8890 8891 8892 8893 8894 8895 8896 8897 8898 8899 8900 8901 8902 8903 8904 8905 8906 8907 8908 8909 8910 8911 8912 8913 8914 8915 8916 8917 8918 8919 8920 8921 8922 8923 8924 8925 8926 8927 8928 8929 8930 8931 8932 8933 8934 8935 8936 8937 8938 8939 8940 8941 8942 8943 8944 8945 8946 8947 8948 8949 8950 8951 8952 8953 8954 8955 8956 8957 8958 8959 8960 8961 8962 8963 8964 8965 8966 8967 8968 8969 8970 8971 8972 8973 8974 8975 8976 8977 8978 8979 8980 8981 8982 8983 8984 8985 8986 8987 8988 8989 8990 8991 8992 8993 8994 8995 8996 8997 8998 8999 9000 9001 9002 9003 9004 9005 9006 9007 9008 9009 9010 9011 9012 9013 9014 9015 9016 9017 9018 9019 9020 9021 9022 9023 9024 9025 9026 9027 9028 9029 9030 9031 9032 9033 9034 9035 9036 9037 9038 9039 9040 9041 9042 9043 9044 9045 9046 9047 9048 9049 9050 9051 9052 9053 9054 9055 9056 9057 9058 9059 9060 9061 9062 9063 9064 9065 9066 9067 9068 9069 9070 9071 9072 9073 9074 9075 9076 9077 9078 9079 9080 9081 9082 9083 9084 9085 9086 9087 9088 9089 9090 9091 9092 9093 9094 9095 9096 9097 9098 9099 9100 9101 9102 9103 9104 9105 9106 9107 9108 9109 9110 9111 9112 9113 9114 9115 9116 9117 9118 9119 9120 9121 9122 9123 9124 9125 9126 9127 9128 9129 9130 9131 9132 9133 9134 9135 9136 9137 9138 9139 9140 9141 9142 9143 9144 9145 9146 9147 9148 9149 9150 9151 9152 9153 9154 9155 9156 9157 9158 9159 9160 9161 9162 9163 9164 9165 9166 9167 9168 9169 9170 9171 9172 9173 9174 9175 9176 9177 9178 9179 9180 9181 9182 9183 9184 9185 9186 9187 9188 9189 9190 9191 9192 9193 9194 9195 9196 9197 9198 9199 9200 9201 9202 9203 9204 9205 9206 9207 9208 9209 9210 9211 9212 9213 9214 9215 9216 9217 9218 9219 9220 9221 9222 9223 9224 9225 9226 9227 9228 9229 9230 9231 9232 9233 9234 9235 9236 9237 9238 9239 9240 9241 9242 9243 9244 9245 9246 9247 9248 9249 9250 9251 9252 9253 9254 9255 9256 9257 9258 9259 9260 9261 9262 9263 9264 9265 9266 9267 9268 9269 9270 9271 9272 9273 9274 9275 9276 9277 9278 9279 9280 9281 9282 9283 9284 9285 9286 9287 9288 9289 9290 9291 9292 9293 9294 9295 9296 9297 9298 9299 9300 9301 9302 9303 9304 9305 9306 9307 9308 9309 9310 9311 9312 9313 9314 9315 9316 9317 9318 9319 9320 9321 9322 9323 9324 9325 9326 9327 9328 9329 9330 9331 9332 9333 9334 9335 9336 9337 9338 9339 9340 9341 9342 9343 9344 9345 9346 9347 9348 9349 9350 9351 9352 9353 9354 9355 9356 9357 9358 9359 9360 9361 9362 9363 9364 9365 9366 9367 9368 9369 9370 9371 9372 9373 9374 9375 9376 9377 9378 9379 9380 9381 9382 9383 9384 9385 9386 9387 9388 9389 9390 9391 9392 9393 9394 9395 9396 9397 9398 9399 9400 9401 9402 9403 9404 9405 9406 9407 9408 9409 9410 9411 9412 9413 9414 9415 9416 9417 9418 9419 9420 9421 9422 9423 9424 9425 9426 9427 9428 9429 9430 9431 9432 9433 9434 9435 9436 9437 9438 9439 9440 9441 9442 9443 9444 9445 9446 9447 9448 9449 9450 9451 9452 9453 9454 9455 9456 9457 9458 9459 9460 9461 9462 9463 9464 9465 9466 9467 9468 9469 9470 9471 9472 9473 9474 9475 9476 9477 9478 9479 9480 9481 9482 9483 9484 9485 9486 9487 9488 9489 9490 9491 9492 9493 9494 9495 9496 9497 9498 9499 9500 9501 9502 9503 9504 9505 9506 9507 9508 9509 9510 9511 9512 9513 9514 9515 9516 9517 9518 9519 9520 9521 9522 9523 9524 9525 9526 9527 9528 9529 9530 9531 9532 9533 9534 9535 9536 9537 9538 9539 9540 9541 9542 9543 9544 9545 9546 9547 9548 9549 9550 9551 9552 9553 9554 9555 9556 9557 9558 9559 9560 9561 9562 9563 9564 9565 9566 9567 9568 9569 9570 9571 9572 9573 9574 9575 9576 9577 9578 9579 9580 9581 9582 9583 9584 9585 9586 9587 9588 9589 9590 9591 9592 9593 9594 9595 9596 9597 9598 9599 9600 9601 9602 9603 9604 9605 9606 9607 9608 9609 9610 9611 9612 9613 9614 9615 9616 9617 9618 9619 9620 9621 9622 9623 9624 9625 9626 9627 9628 9629 9630 9631 9632 9633 9634 9635 9636 9637 9638 9639 9640 9641 9642 9643 9644 9645 9646 9647 9648 9649 9650 9651 9652 9653 9654 9655 9656 9657 9658 9659 9660 9661 9662 9663 9664 9665 9666 9667 9668 9669 9670 9671 9672 9673 9674 9675 9676 9677 9678 9679 9680 9681 9682 9683 9684 9685 9686 9687 9688 9689 9690 9691 9692 9693 9694 9695 9696 9697 9698 9699 9700 9701 9702 9703 9704 9705 9706 9707 9708 9709 9710 9711 9712 9713 9714 9715 9716 9717 9718 9719 9720 9721 9722 9723 9724 9725 9726 9727 9728 9729 9730 9731 9732 9733 9734 9735 9736 9737 9738 9739 9740 9741 9742 9743 9744 9745 9746 9747 9748 9749 9750 9751 9752 9753 9754 9755 9756 9757 9758 9759 9760 9761 9762 9763 9764 9765 9766 9767 9768 9769 9770 9771 9772 9773 9774 9775 9776 9777 9778 9779 9780 9781 9782 9783 9784 9785 9786 9787 9788 9789 9790 9791 9792 9793 9794 9795 9796 9797 9798 9799 9800 9801 9802 9803 9804 9805 9806 9807 9808 9809 9810 9811 9812 9813 9814 9815 9816 9817 9818 9819 9820 9821 9822 9823 9824 9825 9826 9827 9828 9829 9830 9831 9832 9833 9834 9835 9836 9837 9838 9839 9840 9841 9842 9843 9844 9845 9846 9847 9848 9849 9850 9851 9852 9853 9854 9855 9856 9857 9858 9859 9860 9861 9862 9863 9864 9865 9866 9867 9868 9869 9870 9871 9872 9873 9874 9875 9876 9877 9878 9879 9880 9881 9882 9883 9884 9885 9886 9887 9888 9889 9890 9891 9892 9893 9894 9895 9896 9897 9898 9899 9900 9901 9902 9903 9904 9905 9906 9907 9908 9909 9910 9911 9912 9913 9914 9915 9916 9917 9918 9919 9920 9921 9922 9923 9924 9925 9926 9927 9928 9929 9930 9931 9932 9933 9934 9935 9936 9937 9938 9939 9940 9941 9942 9943 9944 9945 9946 9947 9948 9949 9950 9951 9952 9953 9954 9955 9956 9957 9958 9959 9960 9961 9962 9963 9964 9965 9966 9967 9968 9969 9970 9971 9972 9973 9974 9975 9976 9977 9978 9979 9980 9981 9982 9983 9984 9985 9986 9987 9988 9989 9990 9991 9992 9993 9994 9995 9996 9997 9998 9999 10000 10001 10002 10003 10004 10005 10006 10007 10008 10009 10010 10011 10012 10013 10014 10015 10016 10017 10018 10019 10020 10021 10022 10023 10024 10025 10026 10027 10028 10029 10030 10031 10032 10033 10034 10035 10036 10037 10038 10039 10040 10041 10042 10043 10044 10045 10046 10047 10048 10049 10050 10051 10052 10053 10054 10055 10056 10057 10058 10059 10060 10061 10062 10063 10064 10065 10066 10067 10068 10069 10070 10071 10072 10073 10074 10075 10076 10077 10078 10079 10080 10081 10082 10083 10084 10085 10086 10087 10088 10089 10090 10091 10092 10093 10094 10095 10096 10097 10098 10099 10100 10101 10102 10103 10104 10105 10106 10107 10108 10109 10110 10111 10112 10113 10114 10115 10116 10117 10118 10119 10120 10121 10122 10123 10124 10125 10126 10127 10128 10129 10130 10131 10132 10133 10134 10135 10136 10137 10138 10139 10140 10141 10142 10143 10144 10145 10146 10147 10148 10149 10150 10151 10152 10153 10154 10155 10156 10157 10158 10159 10160 10161 10162 10163 10164 10165 10166 10167 10168 10169 10170 10171 10172 10173 10174 10175 10176 10177 10178 10179 10180 10181 10182 10183 10184 10185 10186 10187 10188 10189 10190 10191 10192 10193 10194 10195 10196 10197 10198 10199 10200 10201 10202 10203 10204 10205 10206 10207 10208 10209 10210 10211 10212 10213 10214 10215 10216 10217 10218 10219 10220 10221 10222 10223 10224 10225 10226 10227 10228 10229 10230 10231 10232 10233 10234 10235 10236 10237 10238 10239 10240 10241 10242 10243 10244 10245 10246 10247 10248 10249 10250 10251 10252 10253 10254 10255 10256 10257 10258 10259 10260 10261 10262 10263 10264 10265 10266 10267 10268 10269 10270 10271 10272 10273 10274 10275 10276 10277 10278 10279 10280 10281 10282 10283 10284 10285 10286 10287 10288 10289 10290 10291 10292 10293 10294 10295 10296 10297 10298 10299 10300 10301 10302 10303 10304 10305 10306 10307 10308 10309 10310 10311 10312 10313 10314 10315 10316 10317 10318 10319 10320 10321 10322 10323 10324 10325 10326 10327 10328 10329 10330 10331 10332 10333 10334 10335 10336 10337 10338 10339 10340 10341 10342 10343 10344 10345 10346 10347 10348 10349 10350 10351 10352 10353 10354 10355 10356 10357 10358 10359 10360 10361 10362 10363 10364 10365 10366 10367 10368 10369 10370 10371 10372 10373 10374 10375 10376 10377 10378 10379 10380 10381 10382 10383 10384 10385 10386 10387 10388 10389 10390 10391 10392 10393 10394 10395 10396 10397 10398 10399 10400 10401 10402 10403 10404 10405 10406 10407 10408 10409 10410 10411 10412 10413 10414 10415 10416 10417 10418 10419 10420 10421 10422 10423 10424 10425 10426 10427 10428 10429 10430 10431 10432 10433 10434 10435 10436 10437 10438 10439 10440 10441 10442 10443 10444 10445 10446 10447 10448 10449 10450 10451 10452 10453 10454 10455 10456 10457 10458 10459 10460 10461 10462 10463 10464 10465 10466 10467 10468 10469 10470 10471 10472 10473 10474 10475 10476 10477 10478 10479 10480 10481 10482 10483 10484 10485 10486 10487 10488 10489 10490 10491 10492 10493 10494 10495 10496 10497 10498 10499 10500 10501 10502 10503 10504 10505 10506 10507 10508 10509 10510 10511 10512 10513 10514 10515 10516 10517 10518 10519 10520 10521 10522 10523 10524 10525 10526 10527 10528 10529 10530 10531 10532 10533 10534 10535 10536 10537 10538 10539 10540 10541 10542 10543 10544 10545 10546 10547 10548 10549 10550 10551 10552 10553 10554 10555 10556 10557 10558 10559 10560 10561 10562 10563 10564 10565 10566 10567 10568 10569 10570 10571 10572 10573 10574 10575 10576 10577 10578 10579 10580 10581 10582 10583 10584 10585 10586 10587 10588 10589 10590 10591 10592 10593 10594 10595 10596 10597 10598 10599 10600 10601 10602 10603 10604 10605 10606 10607 10608 10609 10610 10611 10612 10613 10614 10615 10616 10617 10618 10619 10620 10621 10622 10623 10624 10625 10626 10627 10628 10629 10630 10631 10632 10633 10634 10635 10636 10637 10638 10639 10640 10641 10642 10643 10644 10645 10646 10647 10648 10649 10650 10651 10652 10653 10654 10655 10656 10657 10658 10659 10660 10661 10662 10663 10664 10665 10666 10667 10668 10669 10670 10671 10672 10673 10674 10675 10676 10677 10678 10679 10680 10681 10682 10683 10684 10685 10686 10687 10688 10689 10690 10691 10692 10693 10694 10695 10696 10697 10698 10699 10700 10701 10702 10703 10704 10705 10706 10707 10708 10709 10710 10711 10712 10713 10714 10715 10716 10717 10718 10719 10720 10721 10722 10723 10724 10725 10726 10727 10728 10729 10730 10731 10732 10733 10734 10735 10736 10737 10738 10739 10740 10741 10742 10743 10744 10745 10746 10747 10748 10749 10750 10751 10752 10753 10754 10755 10756 10757 10758 10759 10760 10761 10762 10763 10764 10765 10766 10767 10768 10769 10770 10771 10772 10773 10774 10775 10776 10777 10778 10779 10780 10781 10782 10783 10784 10785 10786 10787 10788 10789 10790 10791 10792 10793 10794 10795 10796 10797 10798 10799 10800 10801 10802 10803 10804 10805 10806 10807 10808 10809 10810 10811 10812 10813 10814 10815 10816 10817 10818 10819 10820 10821 10822 10823 10824 10825 10826 10827 10828 10829 10830 10831 10832 10833 10834 10835 10836 10837 10838 10839 10840 10841 10842 10843 10844 10845 10846 10847 10848 10849 10850 10851 10852 10853 10854 10855 10856 10857 10858 10859 10860 10861 10862 10863 10864 10865 10866 10867 10868 10869 10870 10871 10872 10873 10874 10875 10876 10877 10878 10879 10880 10881 10882 10883 10884 10885 10886 10887 10888 10889 10890 10891 10892 10893 10894 10895 10896 10897 10898 10899 10900 10901 10902 10903 10904 10905 10906 10907 10908 10909 10910 10911 10912 10913 10914 10915 10916 10917 10918 10919 10920 10921 10922 10923 10924 10925 10926 10927 10928 10929 10930 10931 10932 10933 10934 10935 10936 10937 10938 10939 10940 10941 10942 10943 10944 10945 10946 10947 10948 10949 10950 10951 10952 10953 10954 10955 10956 10957 10958 10959 10960 10961 10962 10963 10964 10965 10966 10967 10968 10969 10970 10971 10972 10973 10974 10975 10976 10977 10978 10979 10980 10981 10982 10983 10984 10985 10986 10987 10988 10989 10990 10991 10992 10993 10994 10995 10996 10997 10998 10999 11000 11001 11002 11003 11004 11005 11006 11007 11008 11009 11010 11011 11012 11013 11014 11015 11016 11017 11018 11019 11020 11021 11022 11023 11024 11025 11026 11027 11028 11029 11030 11031 11032 11033 11034 11035 11036 11037 11038 11039 11040 11041 11042 11043 11044 11045 11046 11047 11048 11049 11050 11051 11052 11053 11054 11055 11056 11057 11058 11059 11060 11061 11062 11063 11064 11065 11066 11067 11068 11069 11070 11071 11072 11073 11074 11075 11076 11077 11078 11079 11080 11081 11082 11083 11084 11085 11086 11087 11088 11089 11090 11091 11092 11093 11094 11095 11096 11097 11098 11099 11100 11101 11102 11103 11104 11105 11106 11107 11108 11109 11110 11111 11112 11113 11114 11115 11116 11117 11118 11119 11120 11121 11122 11123 11124 11125 11126 11127 11128 11129 11130 11131 11132 11133 11134 11135 11136 11137 11138 11139 11140 11141 11142 11143 11144 11145 11146 11147 11148 11149 11150 11151 11152 11153 11154 11155 11156 11157 11158 11159 11160 11161 11162 11163 11164 11165 11166 11167 11168 11169 11170 11171 11172 11173 11174 11175 11176 11177 11178 11179 11180 11181 11182 11183 11184 11185 11186 11187 11188 11189 11190 11191 11192 11193 11194 11195 11196 11197 11198 11199 11200 11201 11202 11203 11204 11205 11206 11207 11208 11209 11210 11211 11212 11213 11214 11215 11216 11217 11218 11219 11220 11221 11222 11223 11224 11225 11226 11227 11228 11229 11230 11231 11232 11233 11234 11235 11236 11237 11238 11239 11240 11241 11242 11243 11244 11245 11246 11247 11248 11249 11250 11251 11252 11253 11254 11255 11256 11257 11258 11259 11260 11261 11262 11263 11264 11265 11266 11267 11268 11269 11270 11271 11272 11273 11274 11275 11276 11277 11278 11279 11280 11281 11282 11283 11284 11285 11286 11287 11288 11289 11290 11291 11292 11293 11294 11295 11296 11297 11298 11299 11300 11301 11302 11303 11304 11305 11306 11307 11308 11309 11310 11311 11312 11313 11314 11315 11316 11317 11318 11319 11320 11321 11322 11323 11324 11325 11326 11327 11328 11329 11330 11331 11332 11333 11334 11335 11336 11337 11338 11339 11340 11341 11342 11343 11344 11345 11346 11347 11348 11349 11350 11351 11352 11353 11354 11355 11356 11357 11358 11359 11360 11361 11362 11363 11364 11365 11366 11367 11368 11369 11370 11371 11372 11373 11374 11375 11376 11377 11378 11379 11380 11381 11382 11383 11384 11385 11386 11387 11388 11389 11390 11391 11392 11393 11394 11395 11396 11397 11398 11399 11400 11401 11402 11403 11404 11405 11406 11407 11408 11409 11410 11411 11412 11413 11414 11415 11416 11417 11418 11419 11420 11421 11422 11423 11424 11425 11426 11427 11428 11429 11430 11431 11432 11433 11434 11435 11436 11437 11438 11439 11440 11441 11442 11443 11444 11445 11446 11447 11448 11449 11450 11451 11452 11453 11454 11455 11456 11457 11458 11459 11460 11461 11462 11463 11464 11465 11466 11467 11468 11469 11470 11471 11472 11473 11474 11475 11476 11477 11478 11479 11480 11481 11482 11483 11484 11485 11486 11487 11488 11489 11490 11491 11492 11493 11494 11495 11496 11497 11498 11499 11500 11501 11502 11503 11504 11505 11506 11507 11508 11509 11510 11511 11512 11513 11514 11515 11516 11517 11518 11519 11520 11521 11522 11523 11524 11525 11526 11527 11528 11529 11530 11531 11532 11533 11534 11535 11536 11537 11538 11539 11540 11541 11542 11543 11544 11545 11546 11547 11548 11549 11550 11551 11552 11553 11554 11555 11556 11557 11558 11559 11560 11561 11562 11563 11564 11565 11566 11567 11568 11569 11570 11571 11572 11573 11574 11575 11576 11577 11578 11579 11580 11581 11582 11583 11584 11585 11586 11587 11588 11589 11590 11591 11592 11593 11594 11595 11596 11597 11598 11599 11600 11601 11602 11603 11604 11605 11606 11607 11608 11609 11610 11611 11612 11613 11614 11615 11616 11617 11618 11619 11620 11621 11622 11623 11624 11625 11626 11627 11628 11629 11630 11631 11632 11633 11634 11635 11636 11637 11638 11639 11640 11641 11642 11643 11644 11645 11646 11647 11648 11649 11650 11651 11652 11653 11654 11655 11656 11657 11658 11659 11660 11661 11662 11663 11664 11665 11666 11667 11668 11669 11670 11671 11672 11673 11674 11675 11676 11677 11678 11679 11680 11681 11682 11683 11684 11685 11686 11687 11688 11689 11690 11691 11692 11693 11694 11695 11696 11697 11698 11699 11700 11701 11702 11703 11704 11705 11706 11707 11708 11709 11710 11711 11712 11713 11714 11715 11716 11717 11718 11719 11720 11721 11722 11723 11724 11725 11726 11727 11728 11729 11730 11731 11732 11733 11734 11735 11736 11737 11738 11739 11740 11741 11742 11743 11744 11745 11746 11747 11748 11749 11750 11751 11752 11753 11754 11755 11756 11757 11758 11759 11760 11761 11762 11763 11764 11765 11766 11767 11768 11769 11770 11771 11772 11773 11774 11775 11776 11777 11778 11779 11780 11781 11782 11783 11784 11785 11786 11787 11788 11789 11790 11791 11792 11793 11794 11795 11796 11797 11798 11799 11800 11801 11802 11803 11804 11805 11806 11807 11808 11809 11810 11811 11812 11813 11814 11815 11816 11817 11818 11819 11820 11821 11822 11823 11824 11825 11826 11827 11828 11829 11830 11831 11832 11833 11834 11835 11836 11837 11838 11839 11840 11841 11842 11843 11844 11845 11846 11847 11848 11849 11850 11851 11852 11853 11854 11855 11856 11857 11858 11859 11860 11861 11862 11863 11864 11865 11866 11867 11868 11869 11870 11871 11872 11873 11874 11875 11876 11877 11878 11879 11880 11881 11882 11883 11884 11885 11886 11887 11888 11889 11890 11891 11892 11893 11894 11895 11896 11897 11898 11899 11900 11901 11902 11903 11904 11905 11906 11907 11908 11909 11910 11911 11912 11913 11914 11915 11916 11917 11918 11919 11920 11921 11922 11923 11924 11925 11926 11927 11928 11929 11930 11931 11932 11933 11934 11935 11936 11937 11938 11939 11940 11941 11942 11943 11944 11945 11946 11947 11948 11949 11950 11951 11952 11953 11954 11955 11956 11957 11958 11959 11960 11961 11962 11963 11964 11965 11966 11967 11968 11969 11970 11971 11972 11973 11974 11975 11976 11977 11978 11979 11980 11981 11982 11983 11984 11985 11986 11987 11988 11989 11990 11991 11992 11993 11994 11995 11996 11997 11998 11999 12000 12001 12002 12003 12004 12005 12006 12007 12008 12009 12010 12011 12012 12013 12014 12015 12016 12017 12018 12019 12020 12021 12022 12023 12024 12025 12026 12027 12028 12029 12030 12031 12032 12033 12034 12035 12036 12037 12038 12039 12040 12041 12042 12043 12044 12045 12046 12047 12048 12049 12050 12051 12052 12053 12054 12055 12056 12057 12058 12059 12060 12061 12062 12063 12064 12065 12066 12067 12068 12069 12070 12071 12072 12073 12074 12075 12076 12077 12078 12079 12080 12081 12082 12083 12084 12085 12086 12087 12088 12089 12090 12091 12092 12093 12094 12095 12096 12097 12098 12099 12100 12101 12102 12103 12104 12105 12106 12107 12108 12109 12110 12111 12112 12113 12114 12115 12116 12117 12118 12119 12120 12121 12122 12123 12124 12125 12126 12127 12128 12129 12130 12131 12132 12133 12134 12135 12136 12137 12138 12139 12140 12141 12142 12143 12144 12145 12146 12147 12148 12149 12150 12151 12152 12153 12154 12155 12156 12157 12158 12159 12160 12161 12162 12163 12164 12165 12166 12167 12168 12169 12170 12171 12172 12173 12174 12175 12176 12177 12178 12179 12180 12181 12182 12183 12184 12185 12186 12187 12188 12189 12190 12191 12192 12193 12194 12195 12196 12197 12198 12199 12200 12201 12202 12203 12204 12205 12206 12207 12208 12209 12210 12211 12212 12213 12214 12215 12216 12217 12218 12219 12220 12221 12222 12223 12224 12225 12226 12227 12228 12229 12230 12231 12232 12233 12234 12235 12236 12237 12238 12239 12240 12241 12242 12243 12244 12245 12246 12247 12248 12249 12250 12251 12252 12253 12254 12255 12256 12257 12258 12259 12260 12261 12262 12263 12264 12265 12266 12267 12268 12269 12270 12271 12272 12273 12274 12275 12276 12277 12278 12279 12280 12281 12282 12283 12284 12285 12286 12287 12288 12289 12290 12291 12292 12293 12294 12295 12296 12297 12298 12299 12300 12301 12302 12303 12304 12305 12306 12307 12308 12309 12310 12311 12312 12313 12314 12315 12316 12317 12318 12319 12320 12321 12322 12323 12324 12325 12326 12327 12328 12329 12330 12331 12332 12333 12334 12335 12336 12337 12338 12339 12340 12341 12342 12343 12344 12345 12346 12347 12348 12349 12350 12351 12352 12353 12354 12355 12356 12357 12358 12359 12360 12361 12362 12363 12364 12365 12366 12367 12368 12369 12370 12371 12372 12373 12374 12375 12376 12377 12378 12379 12380 12381 12382 12383 12384 12385 12386 12387 12388 12389 12390 12391 12392 12393 12394 12395 12396 12397 12398 12399 12400 12401 12402 12403 12404 12405 12406 12407 12408 12409 12410 12411 12412 12413 12414 12415 12416 12417 12418 12419 12420 12421 12422 12423 12424 12425 12426 12427 12428 12429 12430 12431 12432 12433 12434 12435 12436 12437 12438 12439 12440 12441 12442 12443 12444 12445 12446 12447 12448 12449 12450 12451 12452 12453 12454 12455 12456 12457 12458 12459 12460 12461 12462 12463 12464 12465 12466 12467 12468 12469 12470 12471 12472 12473 12474 12475 12476 12477 12478 12479 12480 12481 12482 12483 12484 12485 12486 12487 12488 12489 12490 12491 12492 12493 12494 12495 12496 12497 12498 12499 12500 12501 12502 12503 12504 12505 12506 12507 12508 12509 12510 12511 12512 12513 12514 12515 12516 12517 12518 12519 12520 12521 12522 12523 12524 12525 12526 12527 12528 12529 12530 12531 12532 12533 12534 12535 12536 12537 12538 12539 12540 12541 12542 12543 12544 12545 12546 12547 12548 12549 12550 12551 12552 12553 12554 12555 12556 12557 12558 12559 12560 12561 12562 12563 12564 12565 12566 12567 12568 12569 12570 12571 12572 12573 12574 12575 12576 12577 12578 12579 12580 12581 12582 12583 12584 12585 12586 12587 12588 12589 12590 12591 12592 12593 12594 12595 12596 12597 12598 12599 12600 12601 12602 12603 12604 12605 12606 12607 12608 12609 12610 12611 12612 12613 12614 12615 12616 12617 12618 12619 12620 12621 12622 12623 12624 12625 12626 12627 12628 12629 12630 12631 12632 12633 12634 12635 12636 12637 12638 12639 12640 12641 12642 12643 12644 12645 12646 12647 12648 12649 12650 12651 12652 12653 12654 12655 12656 12657 12658 12659 12660 12661 12662 12663 12664 12665 12666 12667 12668 12669 12670 12671 12672 12673 12674 12675 12676 12677 12678 12679 12680 12681 12682 12683 12684 12685 12686 12687 12688 12689 12690 12691 12692 12693 12694 12695 12696 12697 12698 12699 12700 12701 12702 12703 12704 12705 12706 12707 12708 12709 12710 12711 12712 12713 12714 12715 12716 12717 12718 12719 12720 12721 12722 12723 12724 12725 12726 12727 12728 12729 12730 12731 12732 12733 12734 12735 12736 12737 12738 12739 12740 12741 12742 12743 12744 12745 12746 12747 12748 12749 12750 12751 12752 12753 12754 12755 12756 12757 12758 12759 12760 12761 12762 12763 12764 12765 12766 12767 12768 12769 12770 12771 12772 12773 12774 12775 12776 12777 12778 12779 12780 12781 12782 12783 12784 12785 12786 12787 12788 12789 12790 12791 12792 12793 12794 12795 12796 12797 12798 12799 12800 12801 12802 12803 12804 12805 12806 12807 12808 12809 12810 12811 12812 12813 12814 12815 12816 12817 12818 12819 12820 12821 12822 12823 12824 12825 12826 12827 12828 12829 12830 12831 12832 12833 12834 12835 12836 12837 12838 12839 12840 12841 12842 12843 12844 12845 12846 12847 12848 12849 12850 12851 12852 12853 12854 12855 12856 12857 12858 12859 12860 12861 12862 12863 12864 12865 12866 12867 12868 12869 12870 12871 12872 12873 12874 12875 12876 12877 12878 12879 12880 12881 12882 12883 12884 12885 12886 12887 12888 12889 12890 12891 12892 12893 12894 12895 12896 12897 12898 12899 12900 12901 12902 12903 12904 12905 12906 12907 12908 12909 12910 12911 12912 12913 12914 12915 12916 12917 12918 12919 12920 12921 12922 12923 12924 12925 12926 12927 12928 12929 12930 12931 12932 12933 12934 12935 12936 12937 12938 12939 12940 12941 12942 12943 12944 12945 12946 12947 12948 12949 12950 12951 12952 12953 12954 12955 12956 12957 12958 12959 12960 12961 12962 12963 12964 12965 12966 12967 12968 12969 12970 12971 12972 12973 12974 12975 12976 12977 12978 12979 12980 12981 12982 12983 12984 12985 12986 12987 12988 12989 12990 12991 12992 12993 12994 12995 12996 12997 12998 12999 13000 13001 13002 13003 13004 13005 13006 13007 13008 13009 13010 13011 13012 13013 13014 13015 13016 13017 13018 13019 13020 13021 13022 13023 13024 13025 13026 13027 13028 13029 13030 13031 13032 13033 13034 13035 13036 13037 13038 13039 13040 13041 13042 13043 13044 13045 13046 13047 13048 13049 13050 13051 13052 13053 13054 13055 13056 13057 13058 13059 13060 13061 13062 13063 13064 13065 13066 13067 13068 13069 13070 13071 13072 13073 13074 13075 13076 13077 13078 13079 13080 13081 13082 13083 13084 13085 13086 13087 13088 13089 13090 13091 13092 13093 13094 13095 13096 13097 13098 13099 13100 13101 13102 13103 13104 13105 13106 13107 13108 13109 13110 13111 13112 13113 13114 13115 13116 13117 13118 13119 13120 13121 13122 13123 13124 13125 13126 13127 13128 13129 13130 13131 13132 13133 13134 13135 13136 13137 13138 13139 13140 13141 13142 13143 13144 13145 13146 13147 13148 13149 13150 13151 13152 13153 13154 13155 13156 13157 13158 13159 13160 13161 13162 13163 13164 13165 13166 13167 13168 13169 13170 13171 13172 13173 13174 13175 13176 13177 13178 13179 13180 13181 13182 13183 13184 13185 13186 13187 13188 13189 13190 13191 13192 13193 13194 13195 13196 13197 13198 13199 13200 13201 13202 13203 13204 13205 13206 13207 13208 13209 13210 13211 13212 13213 13214 13215 13216 13217 13218 13219 13220 13221 13222 13223 13224 13225 13226 13227 13228 13229 13230 13231 13232 13233 13234 13235 13236 13237 13238 13239 13240 13241 13242 13243 13244 13245 13246 13247 13248 13249 13250 13251 13252 13253 13254 13255 13256 13257 13258 13259 13260 13261 13262 13263 13264 13265 13266 13267 13268 13269 13270 13271 13272 13273 13274 13275 13276 13277 13278 13279 13280 13281 13282 13283 13284 13285 13286 13287 13288 13289 13290 13291 13292 13293 13294 13295 13296 13297 13298 13299 13300 13301 13302 13303 13304 13305 13306 13307 13308 13309 13310 13311 13312 13313 13314 13315 13316 13317 13318 13319 13320 13321 13322 13323 13324 13325 13326 13327 13328 13329 13330 13331 13332 13333 13334 13335 13336 13337 13338 13339 13340 13341 13342 13343 13344 13345 13346 13347 13348 13349 13350 13351 13352 13353 13354 13355 13356 13357 13358 13359 13360 13361 13362 13363 13364 13365 13366 13367 13368 13369 13370 13371 13372 13373 13374 13375 13376 13377 13378 13379 13380 13381 13382 13383 13384 13385 13386 13387 13388 13389 13390 13391 13392 13393 13394 13395 13396 13397 13398 13399 13400 13401 13402 13403 13404 13405 13406 13407 13408 13409 13410 13411 13412 13413 13414 13415 13416 13417 13418 13419 13420 13421 13422 13423 13424 13425 13426 13427 13428 13429 13430 13431 13432 13433 13434 13435 13436 13437 13438 13439 13440 13441 13442 13443 13444 13445 13446 13447 13448 13449 13450 13451 13452 13453 13454 13455 13456 13457 13458 13459 13460 13461 13462 13463 13464 13465 13466 13467 13468 13469 13470 13471 13472 13473 13474 13475 13476 13477 13478 13479 13480 13481 13482 13483 13484 13485 13486 13487 13488 13489 13490 13491 13492 13493 13494 13495 13496 13497 13498 13499 13500 13501 13502 13503 13504 13505 13506 13507 13508 13509 13510 13511 13512 13513 13514 13515 13516 13517 13518 13519 13520 13521 13522 13523 13524 13525 13526 13527 13528 13529 13530 13531 13532 13533 13534 13535 13536 13537 13538 13539 13540 13541 13542 13543 13544 13545 13546 13547 13548 13549 13550 13551 13552 13553 13554 13555 13556 13557 13558 13559 13560 13561 13562 13563 13564 13565 13566 13567 13568 13569 13570 13571 13572 13573 13574 13575 13576 13577 13578 13579 13580 13581 13582 13583 13584 13585 13586 13587 13588 13589 13590 13591 13592 13593 13594 13595 13596 13597 13598 13599 13600 13601 13602 13603 13604 13605 13606 13607 13608 13609 13610 13611 13612 13613 13614 13615 13616 13617 13618 13619 13620 13621 13622 13623 13624 13625 13626 13627 13628 13629 13630 13631 13632 13633 13634 13635 13636 13637 13638 13639 13640 13641 13642 13643 13644 13645 13646 13647 13648 13649 13650 13651 13652 13653 13654 13655 13656 13657 13658 13659 13660 13661 13662 13663 13664 13665 13666 13667 13668 13669 13670 13671 13672 13673 13674 13675 13676 13677 13678 13679 13680 13681 13682 13683 13684 13685 13686 13687 13688 13689 13690 13691 13692 13693 13694 13695 13696 13697 13698 13699 13700 13701 13702 13703 13704 13705 13706 13707 13708 13709 13710 13711 13712 13713 13714 13715 13716 13717 13718 13719 13720 13721 13722 13723 13724 13725 13726 13727 13728 13729 13730 13731 13732 13733 13734 13735 13736 13737 13738 13739 13740 13741 13742 13743 13744 13745 13746 13747 13748 13749 13750 13751 13752 13753 13754 13755 13756 13757 13758 13759 13760 13761 13762 13763 13764 13765 13766 13767 13768 13769 13770 13771 13772 13773 13774 13775 13776 13777 13778 13779 13780 13781 13782 13783 13784 13785 13786 13787 13788 13789 13790 13791 13792 13793 13794 13795 13796 13797 13798 13799 13800 13801 13802 13803 13804 13805 13806 13807 13808 13809 13810 13811 13812 13813 13814 13815 13816 13817 13818 13819 13820 13821 13822 13823 13824 13825 13826 13827 13828 13829 13830 13831 13832 13833 13834 13835 13836 13837 13838 13839 13840 13841 13842 13843 13844 13845 13846 13847 13848 13849 13850 13851 13852 13853 13854 13855 13856 13857 13858 13859 13860 13861 13862 13863 13864 13865 13866 13867 13868 13869 13870 13871 13872 13873 13874 13875 13876 13877 13878 13879 13880 13881 13882 13883 13884 13885 13886 13887 13888 13889 13890 13891 13892 13893 13894 13895 13896 13897 13898 13899 13900 13901 13902 13903 13904 13905 13906 13907 13908 13909 13910 13911 13912 13913 13914 13915 13916 13917 13918 13919 13920 13921 13922 13923 13924 13925 13926 13927 13928 13929 13930 13931 13932 13933 13934 13935 13936 13937 13938 13939 13940 13941 13942 13943 13944 13945 13946 13947 13948 13949 13950 13951 13952 13953 13954 13955 13956 13957 13958 13959 13960 13961 13962 13963 13964 13965 13966 13967 13968 13969 13970 13971 13972 13973 13974 13975 13976 13977 13978 13979 13980 13981 13982 13983 13984 13985 13986 13987 13988 13989 13990 13991 13992 13993 13994 13995 13996 13997 13998 13999 14000 14001 14002 14003 14004 14005 14006 14007 14008 14009 14010 14011 14012 14013 14014 14015 14016 14017 14018 14019 14020 14021 14022 14023 14024 14025 14026 14027 14028 14029 14030 14031 14032 14033 14034 14035 14036 14037 14038 14039 14040 14041 14042 14043 14044 14045 14046 14047 14048 14049 14050 14051 14052 14053 14054 14055 14056 14057 14058 14059 14060 14061 14062 14063 14064 14065 14066 14067 14068 14069 14070 14071 14072 14073 14074 14075 14076 14077 14078 14079 14080 14081 14082 14083 14084 14085 14086 14087 14088 14089 14090 14091 14092 14093 14094 14095 14096 14097 14098 14099 14100 14101 14102 14103 14104 14105 14106 14107 14108 14109 14110 14111 14112 14113 14114 14115 14116 14117 14118 14119 14120 14121 14122 14123 14124 14125 14126 14127 14128 14129 14130 14131 14132 14133 14134 14135 14136 14137 14138 14139 14140 14141 14142 14143 14144 14145 14146 14147 14148 14149 14150 14151 14152 14153 14154 14155 14156 14157 14158 14159 14160 14161 14162 14163 14164 14165 14166 14167 14168 14169 14170 14171 14172 14173 14174 14175 14176 14177 14178 14179 14180 14181 14182 14183 14184 14185 14186 14187 14188 14189 14190 14191 14192 14193 14194 14195 14196 14197 14198 14199 14200 14201 14202 14203 14204 14205 14206 14207 14208 14209 14210 14211 14212 14213 14214 14215 14216 14217 14218 14219 14220 14221 14222 14223 14224 14225 14226 14227 14228 14229 14230 14231 14232 14233 14234 14235 14236 14237 14238 14239 14240 14241 14242 14243 14244 14245 14246 14247 14248 14249 14250 14251 14252 14253 14254 14255 14256 14257 14258 14259 14260 14261 14262 14263 14264 14265 14266 14267 14268 14269 14270 14271 14272 14273 14274 14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 14316 14317 14318 14319 14320 14321 14322 14323 14324 14325 14326 14327 14328 14329 14330 14331 14332 14333 14334 14335 14336 14337 14338 14339 14340 14341 14342 14343 14344 14345 14346 14347 14348 14349 14350 14351 14352 14353 14354 14355 14356 14357 14358 14359 14360 14361 14362 14363 14364 14365 14366 14367 14368 14369 14370 14371 14372 14373 14374 14375 14376 14377 14378 14379 14380 14381 14382 14383 14384 14385 14386 14387 14388 14389 14390 14391 14392 14393 14394 14395 14396 14397 14398 14399 14400 14401 14402 14403 14404 14405 14406 14407 14408 14409 14410 14411 14412 14413 14414 14415 14416 14417 14418 14419 14420 14421 14422 14423 14424 14425 14426 14427 14428 14429 14430 14431 14432 14433 14434 14435 14436 14437 14438 14439 14440 14441 14442 14443 14444 14445 14446 14447 14448 14449 14450 14451 14452 14453 14454 14455 14456 14457 14458 14459 14460 14461 14462 14463 14464 14465 14466 14467 14468 14469 14470 14471 14472 14473 14474 14475 14476 14477 14478 14479 14480 14481 14482 14483 14484 14485 14486 14487 14488 14489 14490 14491 14492 14493 14494 14495 14496 14497 14498 14499 14500 14501 14502 14503 14504 14505 14506 14507 14508 14509 14510 14511 14512 14513 14514 14515 14516 14517 14518 14519 14520 14521 14522 14523 14524 14525 14526 14527 14528 14529 14530 14531 14532 14533 14534 14535 14536 14537 14538 14539 14540 14541 14542 14543 14544 14545 14546 14547 14548 14549 14550 14551 14552 14553 14554 14555 14556 14557 14558 14559 14560 14561 14562 14563 14564 14565 14566 14567 14568 14569 14570 14571 14572 14573 14574 14575 14576 14577 14578 14579 14580 14581 14582 14583 14584 14585 14586 14587 14588 14589 14590 14591 14592 14593 14594 14595 14596 14597 14598 14599 14600 14601 14602 14603 14604 14605 14606 14607 14608 14609 14610 14611 14612 14613 14614 14615 14616 14617 14618 14619 14620 14621 14622 14623 14624 14625 14626 14627 14628 14629 14630 14631 14632 14633 14634 14635 14636 14637 14638 14639 14640 14641 14642 14643 14644 14645 14646 14647 14648 14649 14650 14651 14652 14653 14654 14655 14656 14657 14658 14659 14660 14661 14662 14663 14664 14665 14666 14667 14668 14669 14670 14671 14672 14673 14674 14675 14676 14677 14678 14679 14680 14681 14682 14683 14684 14685 14686 14687 14688 14689 14690 14691 14692 14693 14694 14695 14696 14697 14698 14699 14700 14701 14702 14703 14704 14705 14706 14707 14708 14709 14710 14711 14712 14713 14714 14715 14716 14717 14718 14719 14720 14721 14722 14723 14724 14725 14726 14727 14728 14729 14730 14731 14732 14733 14734 14735 14736 14737 14738 14739 14740 14741 14742 14743 14744 14745 14746 14747 14748 14749 14750 14751 14752 14753 14754 14755 14756 14757 14758 14759 14760 14761 14762 14763 14764 14765 14766 14767 14768 14769 14770 14771 14772 14773 14774 14775 14776 14777 14778 14779 14780 14781 14782 14783 14784 14785 14786 14787 14788 14789 14790 14791 14792 14793 14794 14795 14796 14797 14798 14799 14800 14801 14802 14803 14804 14805 14806 14807 14808 14809 14810 14811 14812 14813 14814 14815 14816 14817 14818 14819 14820 14821 14822 14823 14824 14825 14826 14827 14828 14829 14830 14831 14832 14833 14834 14835 14836 14837 14838 14839 14840 14841 14842 14843 14844 14845 14846 14847 14848 14849 14850 14851 14852 14853 14854 14855 14856 14857 14858 14859 14860 14861 14862 14863 14864 14865 14866 14867 14868 14869 14870 14871 14872 14873 14874 14875 14876 14877 14878 14879 14880 14881 14882 14883 14884 14885 14886 14887 14888 14889 14890 14891 14892 14893 14894 14895 14896 14897 14898 14899 14900 14901 14902 14903 14904 14905 14906 14907 14908 14909 14910 14911 14912 14913 14914 14915 14916 14917 14918 14919 14920 14921 14922 14923 14924 14925 14926 14927 14928 14929 14930 14931 14932 14933 14934 14935 14936 14937 14938 14939 14940 14941 14942 14943 14944 14945 14946 14947 14948 14949 14950 14951 14952 14953 14954 14955 14956 14957 14958 14959 14960 14961 14962 14963 14964 14965 14966 14967 14968 14969 14970 14971 14972 14973
# KTranslator Generated File
# Copyright (c) 1999 MandrakeSoft
# Vladimir Vuksan <vuksan@veus.hr>, 1999.
# Vlatko Kosturjak <kost@iname.com>, 2001, 2002.
# Dejan Dakic <ddakic@foi.hr>, 2002.
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2002-09-04 20:31+0200\n"
"PO-Revision-Date: 2002-03-22 05:58CET\n"
"Last-Translator: Vlatko Kosturjak <kost@iname.com>\n"
"Language-Team: Croatian <lokalizacija@linux.hr>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-2\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.8\n"

#: ../../Xconfig/card.pm_.c:16
msgid "256 kB"
msgstr "256 kB"

#: ../../Xconfig/card.pm_.c:17
msgid "512 kB"
msgstr "512 kB"

#: ../../Xconfig/card.pm_.c:18
msgid "1 MB"
msgstr "1 MB"

#: ../../Xconfig/card.pm_.c:19
msgid "2 MB"
msgstr "2 MB"

#: ../../Xconfig/card.pm_.c:20
msgid "4 MB"
msgstr "4 MB"

#: ../../Xconfig/card.pm_.c:21
msgid "8 MB"
msgstr "8 MB"

#: ../../Xconfig/card.pm_.c:22
msgid "16 MB"
msgstr "16 MB"

#: ../../Xconfig/card.pm_.c:23
msgid "32 MB"
msgstr "32 MB"

#: ../../Xconfig/card.pm_.c:24
msgid "64 MB or more"
msgstr "64 MB ili više"

#: ../../Xconfig/card.pm_.c:203
msgid "Choose a X server"
msgstr "Odaberite X poslužitelj"

#: ../../Xconfig/card.pm_.c:203
msgid "X server"
msgstr "X poslužitelj"

#: ../../Xconfig/card.pm_.c:230
msgid "Multi-head configuration"
msgstr "Više-zaslonska postava"

#: ../../Xconfig/card.pm_.c:231
msgid ""
"Your system support multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Vaš sustav podržava postavu sa više zaslona.\n"
"Što želite napraviti?"

#: ../../Xconfig/card.pm_.c:286
msgid "Select the memory size of your graphics card"
msgstr "Odaberite količinu memorije na grafičkoj kartici"

#: ../../Xconfig/card.pm_.c:347
msgid "XFree configuration"
msgstr "XFree postavke"

#: ../../Xconfig/card.pm_.c:349
msgid "Which configuration of XFree do you want to have?"
msgstr "Koju konfiguraciju XFree-a želite imati?"

#: ../../Xconfig/card.pm_.c:381
msgid "Configure all heads independently"
msgstr "Podesi sve zaslone nezavisno"

#: ../../Xconfig/card.pm_.c:382
msgid "Use Xinerama extension"
msgstr "Koristi Xinerama proširenje"

#: ../../Xconfig/card.pm_.c:386
#, fuzzy, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Podesi samo karticu \"%s\" (%s)"

#: ../../Xconfig/card.pm_.c:398 ../../Xconfig/card.pm_.c:399
#: ../../Xconfig/various.pm_.c:23
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: ../../Xconfig/card.pm_.c:410 ../../Xconfig/card.pm_.c:436
#: ../../Xconfig/various.pm_.c:23
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s sa 3D hardware akceleracijom"

#: ../../Xconfig/card.pm_.c:413
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Vaša video kartica može imati 3D ubrzanje samo sa XFree %s.\n"
"Vaša kartica je podržana od XFree %s koji možda ima bolju podršku u 2D."

#: ../../Xconfig/card.pm_.c:415 ../../Xconfig/card.pm_.c:438
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "Vaša kartica može imati 3D hardware-sku akceleraciju sa XFree %s."

#: ../../Xconfig/card.pm_.c:423 ../../Xconfig/card.pm_.c:444
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s sa EXPERIMENTALNOM 3D hardware akceleracijom"

#: ../../Xconfig/card.pm_.c:426
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Vaša video kartica može imati 3D ubrzanje samo sa XFree %s,\n"
"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODRŠKA I MOŽE ZAMRZNUTI VAŠE "
"RAČUNALO.Vaša kartica je podržana od XFree %s koja može imati bolju podršku "
"u 2D."

#: ../../Xconfig/card.pm_.c:429 ../../Xconfig/card.pm_.c:446
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Vaša kartica može imati 3D hadware akceleraciju podržanu od XFree %s,\n"
"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODRŠKA I MOŽE ZAMRZNUTI VAŠE "
"RAČUNALO."

#: ../../Xconfig/card.pm_.c:452
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (instalacijski zaslonski upravljački program)"

#: ../../Xconfig/main.pm_.c:76 ../../Xconfig/main.pm_.c:77
#: ../../Xconfig/monitor.pm_.c:96 ../../any.pm_.c:977
msgid "Custom"
msgstr "Prilagođeno"

#: ../../Xconfig/main.pm_.c:102
#, fuzzy
msgid "Graphic Card"
msgstr "Grafička kartica"

#: ../../Xconfig/main.pm_.c:105 ../../Xconfig/monitor.pm_.c:93
msgid "Monitor"
msgstr "Monitor"

#: ../../Xconfig/main.pm_.c:108 ../../Xconfig/resolution_and_depth.pm_.c:209
msgid "Resolution"
msgstr "Rezolucija"

#: ../../Xconfig/main.pm_.c:113
msgid "Test"
msgstr ""

#: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:63
#: ../../diskdrake/interactive.pm_.c:381 ../../diskdrake/removable.pm_.c:25
#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:86
msgid "Options"
msgstr "Opcije"

#: ../../Xconfig/main.pm_.c:121 ../../Xconfig/resolution_and_depth.pm_.c:268
#: ../../install_gtk.pm_.c:79 ../../install_steps_gtk.pm_.c:275
#: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142
#: ../../interactive.pm_.c:354 ../../interactive/http.pm_.c:104
#: ../../interactive/newt.pm_.c:174 ../../interactive/newt.pm_.c:176
#: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143
#: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:159
#: ../../my_gtk.pm_.c:287 ../../my_gtk.pm_.c:310
#: ../../standalone/drakbackup_.c:3970 ../../standalone/drakbackup_.c:4065
#: ../../standalone/drakbackup_.c:4084
msgid "Ok"
msgstr "U redu"

#: ../../Xconfig/main.pm_.c:121 ../../diskdrake/dav.pm_.c:24
#: ../../harddrake/ui.pm_.c:94 ../../printerdrake.pm_.c:3155
#: ../../standalone/logdrake_.c:224
msgid "Quit"
msgstr "Završi"

#: ../../Xconfig/main.pm_.c:144
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Zadrži promjene?\n"
"Trenutna postava je:\n"
"\n"
"%s"

#: ../../Xconfig/monitor.pm_.c:93
msgid "Choose a monitor"
msgstr "Odaberite monitor"

#: ../../Xconfig/monitor.pm_.c:97
msgid "Plug'n Play"
msgstr ""

#: ../../Xconfig/monitor.pm_.c:98 ../../mouse.pm_.c:46
msgid "Generic"
msgstr "Generički"

#: ../../Xconfig/monitor.pm_.c:99 ../../harddrake/ui.pm_.c:37
#, fuzzy
msgid "Vendor"
msgstr "Vrati"

#: ../../Xconfig/monitor.pm_.c:109
msgid "Plug'n Play probing failed. Please choose a precise monitor"
msgstr ""

#: ../../Xconfig/monitor.pm_.c:114
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Dva kritična parametra su vertikalna vrijednost osvježavanja, koja je "
"vrijednost\n"
"u kojoj se cijeli zaslon osvježava, i najvažnije horizontalna\n"
"vrijednost osvježavanja koja ja vrijednost u kojoj se svaka linija "
"prikazuje.\n"
"\n"
"JAKO JE VAŽNO da ne specifirate tip monitora kod kojega je raspon "
"osvježavanja\n"
"veći od mogućnosti vašeg monitora jer možete oštetiti vaš monitor.\n"
" Ukoliko ste u nedoumici, izaberite konzervativne postavke."

#: ../../Xconfig/monitor.pm_.c:121
msgid "Horizontal refresh rate"
msgstr "Horizontalna vrijednost osvježavanja"

#: ../../Xconfig/monitor.pm_.c:122
msgid "Vertical refresh rate"
msgstr "Vertikalna vrijednost osvježavanja"

#: ../../Xconfig/resolution_and_depth.pm_.c:12
msgid "256 colors (8 bits)"
msgstr "256 boja (8 bita)"

#: ../../Xconfig/resolution_and_depth.pm_.c:13
msgid "32 thousand colors (15 bits)"
msgstr "32 tisuća boja (15 bita)"

#: ../../Xconfig/resolution_and_depth.pm_.c:14
msgid "65 thousand colors (16 bits)"
msgstr "65 tisuća boja (16 bita)"

#: ../../Xconfig/resolution_and_depth.pm_.c:15
msgid "16 million colors (24 bits)"
msgstr "16 milijuna boja (24 bita)"

#: ../../Xconfig/resolution_and_depth.pm_.c:16
msgid "4 billion colors (32 bits)"
msgstr "4 milijarde boja (32 bita)"

#: ../../Xconfig/resolution_and_depth.pm_.c:129
msgid "Resolutions"
msgstr "Rezolucije"

#: ../../Xconfig/resolution_and_depth.pm_.c:254
msgid "Choose the resolution and the color depth"
msgstr "Odaberite rezoluciju  i color depth"

#: ../../Xconfig/resolution_and_depth.pm_.c:255
#, c-format
msgid "Graphics card: %s"
msgstr "Grafička kartica: %s"

#: ../../Xconfig/resolution_and_depth.pm_.c:268 ../../any.pm_.c:1018
#: ../../bootlook.pm_.c:345 ../../diskdrake/smbnfs_gtk.pm_.c:87
#: ../../install_steps_gtk.pm_.c:406 ../../install_steps_gtk.pm_.c:464
#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:354
#: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:174
#: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143
#: ../../my_gtk.pm_.c:158 ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287
#: ../../network/netconnect.pm_.c:46 ../../printerdrake.pm_.c:2124
#: ../../standalone/drakautoinst_.c:203 ../../standalone/drakbackup_.c:3924
#: ../../standalone/drakbackup_.c:3957 ../../standalone/drakbackup_.c:3983
#: ../../standalone/drakbackup_.c:4010 ../../standalone/drakbackup_.c:4037
#: ../../standalone/drakbackup_.c:4097 ../../standalone/drakbackup_.c:4124
#: ../../standalone/drakbackup_.c:4154 ../../standalone/drakbackup_.c:4180
#: ../../standalone/drakconnect_.c:115 ../../standalone/drakconnect_.c:147
#: ../../standalone/drakconnect_.c:289 ../../standalone/drakconnect_.c:537
#: ../../standalone/drakconnect_.c:679 ../../standalone/drakfloppy_.c:234
#: ../../standalone/drakfloppy_.c:383 ../../standalone/drakfont_.c:970
#: ../../standalone/drakgw_.c:536 ../../standalone/logdrake_.c:224
#: ../../standalone/logdrake_.c:526
msgid "Cancel"
msgstr "Odustani"

#: ../../Xconfig/test.pm_.c:30
msgid "Test of the configuration"
msgstr "Iskušaj postavu"

#: ../../Xconfig/test.pm_.c:31
msgid "Do you want to test the configuration?"
msgstr "Da li želite iskušati postavu ?"

#: ../../Xconfig/test.pm_.c:31
#, fuzzy
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Upozorenje: testiranje grafičke kartice može zamrzunti vaše računalo"

#: ../../Xconfig/various.pm_.c:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Raspored tipkovnice: %s\n"

#: ../../Xconfig/various.pm_.c:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Vrsta miša: %s\n"

#: ../../Xconfig/various.pm_.c:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Uređaj miša: %s\n"

#: ../../Xconfig/various.pm_.c:32
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: ../../Xconfig/various.pm_.c:33
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Horizontalna Sinkronizacija Monitora: %s\n"

#: ../../Xconfig/various.pm_.c:34
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Vertikalno Osvježenje Monitora: %s\n"

#: ../../Xconfig/various.pm_.c:35
#, c-format
msgid "Graphics card: %s\n"
msgstr "Grafička kartica: %s\n"

#: ../../Xconfig/various.pm_.c:36
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Grafička memorija: %s kB\n"

#: ../../Xconfig/various.pm_.c:38
#, c-format
msgid "Color depth: %s\n"
msgstr "Dubina boje: %s\n"

#: ../../Xconfig/various.pm_.c:39
#, c-format
msgid "Resolution: %s\n"
msgstr "Rezolucija: %s\n"

#: ../../Xconfig/various.pm_.c:41
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 poslužitelj: %s\n"

#: ../../Xconfig/various.pm_.c:42
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86 upravljački program: %s\n"

#: ../../Xconfig/various.pm_.c:60
msgid "Graphical interface at startup"
msgstr "X kod pokretanja sustava"

#: ../../Xconfig/various.pm_.c:61
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
"Mogu podesiti da se X podigne automatski kod podizanja sustava.\n"
"Da li želite da se X automatski pokreće?"

#: ../../Xconfig/various.pm_.c:72
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""

#: ../../Xconfig/various.pm_.c:84
#, fuzzy
msgid "What norm is your TV using?"
msgstr "Kakav tip ISDN veze koristite ?"

#: ../../any.pm_.c:108 ../../any.pm_.c:133
msgid "First sector of boot partition"
msgstr "Prvi sektor boot particije"

#: ../../any.pm_.c:108 ../../any.pm_.c:133 ../../any.pm_.c:210
msgid "First sector of drive (MBR)"
msgstr "Prvi sektor pogona (MBR)"

#: ../../any.pm_.c:112
msgid "SILO Installation"
msgstr "SILO instalacija"

#: ../../any.pm_.c:113 ../../any.pm_.c:126
msgid "Where do you want to install the bootloader?"
msgstr "Gdje želite instalirati bootloader?"

#: ../../any.pm_.c:125
msgid "LILO/grub Installation"
msgstr "LILO/grub instalacija"

#: ../../any.pm_.c:137 ../../any.pm_.c:151
msgid "SILO"
msgstr "SILO"

#: ../../any.pm_.c:139
msgid "LILO with text menu"
msgstr "LILO sa tekstualnim menijem"

#: ../../any.pm_.c:140 ../../any.pm_.c:151
msgid "LILO with graphical menu"
msgstr "LILO sa grafičkim menijem"

#: ../../any.pm_.c:143
msgid "Grub"
msgstr "Grub"

#: ../../any.pm_.c:147
msgid "Boot from DOS/Windows (loadlin)"
msgstr "Podizanje sa DOS/Windows-a (loadlin)"

#: ../../any.pm_.c:149 ../../any.pm_.c:151
msgid "Yaboot"
msgstr "Yaboot"

#: ../../any.pm_.c:159 ../../any.pm_.c:190
msgid "Bootloader main options"
msgstr "Glavne postavke bootloadera"

#: ../../any.pm_.c:160 ../../any.pm_.c:191
msgid "Bootloader to use"
msgstr "Koristiti Bootloader"

#: ../../any.pm_.c:162
msgid "Bootloader installation"
msgstr "Bootloader instalacija"

#: ../../any.pm_.c:164 ../../any.pm_.c:193
msgid "Boot device"
msgstr "Boot uređaj"

#: ../../any.pm_.c:165
msgid "Compact"
msgstr "Zbijeno"

#: ../../any.pm_.c:165
msgid "compact"
msgstr "zbijeno"

#: ../../any.pm_.c:166 ../../any.pm_.c:290
msgid "Video mode"
msgstr "Video mod"

#: ../../any.pm_.c:168
msgid "Delay before booting default image"
msgstr "Odgoda prije bootiranja uobičajenog imagea"

#: ../../any.pm_.c:170 ../../any.pm_.c:788
#: ../../diskdrake/smbnfs_gtk.pm_.c:179
#: ../../install_steps_interactive.pm_.c:1093 ../../network/modem.pm_.c:48
#: ../../printerdrake.pm_.c:850 ../../printerdrake.pm_.c:965
#: ../../standalone/drakbackup_.c:3526 ../../standalone/drakconnect_.c:624
#: ../../standalone/drakconnect_.c:649
msgid "Password"
msgstr "Lozinka"

#: ../../any.pm_.c:171 ../../any.pm_.c:789
#: ../../install_steps_interactive.pm_.c:1094
msgid "Password (again)"
msgstr "Lozinka (provjera)"

#: ../../any.pm_.c:172
msgid "Restrict command line options"
msgstr "Ograničene opcije na komandnoj liniji"

#: ../../any.pm_.c:172
msgid "restrict"
msgstr "ograniči"

#: ../../any.pm_.c:174
msgid "Clean /tmp at each boot"
msgstr "Očisti /tmp na svakom podizanju"

#: ../../any.pm_.c:175
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Precizna veličina RAMa (pronađeno %d MB)"

#: ../../any.pm_.c:177
msgid "Enable multi profiles"
msgstr "Omogući više obrazaca"

#: ../../any.pm_.c:181
msgid "Give the ram size in MB"
msgstr "Upišite veličinu RAM u Mb"

#: ../../any.pm_.c:183
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Postavka ``Ograničene opcije na komandnoj liniji'' nema svrhe ako ne unesete "
"lozinku"

#: ../../any.pm_.c:184 ../../any.pm_.c:764
#: ../../diskdrake/interactive.pm_.c:1191
#: ../../install_steps_interactive.pm_.c:1088
msgid "Please try again"
msgstr "Molim pokušajte ponovo"

#: ../../any.pm_.c:184 ../../any.pm_.c:764
#: ../../install_steps_interactive.pm_.c:1088
msgid "The passwords do not match"
msgstr "Lozinke se ne podudaraju"

#: ../../any.pm_.c:192
msgid "Init Message"
msgstr "Init poruka"

#: ../../any.pm_.c:194
msgid "Open Firmware Delay"
msgstr "Pauza Otvorenog Firmware-a"

#: ../../any.pm_.c:195
msgid "Kernel Boot Timeout"
msgstr "Vrijeme čekanja podizanja kernela"

#: ../../any.pm_.c:196
msgid "Enable CD Boot?"
msgstr "Omogući CD podizanje?"

#: ../../any.pm_.c:197
msgid "Enable OF Boot?"
msgstr "Omogući podizanje?"

#: ../../any.pm_.c:198
msgid "Default OS?"
msgstr "Uobičajeni OS?"

#: ../../any.pm_.c:232
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Odlučili ste instalirati bootloader na particiju.\n"
"To podrazumijeva da već imate bootloader na tvrdom disku sa kojeg podižete\n"
"sustav (npr. System Commander).\n"
"\n"
"Sa kojeg diska želite podizati?"

#: ../../any.pm_.c:247
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can add some more or change the existing ones."
msgstr ""
"Ovo su trenutni zapisi.\n"
"Možete dodati još koji ili urediti postojeći."

#: ../../any.pm_.c:257 ../../standalone/drakbackup_.c:1556
#: ../../standalone/drakbackup_.c:1669 ../../standalone/drakfont_.c:1011
#: ../../standalone/drakfont_.c:1054
msgid "Add"
msgstr "Dodaj"

#: ../../any.pm_.c:257 ../../any.pm_.c:776 ../../diskdrake/dav.pm_.c:64
#: ../../diskdrake/hd_gtk.pm_.c:153 ../../diskdrake/removable.pm_.c:27
#: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153
#: ../../printerdrake.pm_.c:3155 ../../standalone/drakbackup_.c:2770
msgid "Done"
msgstr "Gotov"

#: ../../any.pm_.c:257
msgid "Modify"
msgstr "Promjeni"

#: ../../any.pm_.c:265
msgid "Which type of entry do you want to add?"
msgstr "Kakvu vrstu zapisa želite dodati"

#: ../../any.pm_.c:266 ../../standalone/drakbackup_.c:1703
msgid "Linux"
msgstr "Linux"

#: ../../any.pm_.c:266
msgid "Other OS (SunOS...)"
msgstr "Drugi OS (SunOS...)"

#: ../../any.pm_.c:267
msgid "Other OS (MacOS...)"
msgstr "Drugi OS (MacOS...)"

#: ../../any.pm_.c:267
msgid "Other OS (windows...)"
msgstr "Drugi OS (Windows...)"

#: ../../any.pm_.c:286
msgid "Image"
msgstr "Slika (image)"

#: ../../any.pm_.c:287 ../../any.pm_.c:298
msgid "Root"
msgstr "Root"

#: ../../any.pm_.c:288 ../../any.pm_.c:316
msgid "Append"
msgstr "Dodaj na kraj"

#: ../../any.pm_.c:292
msgid "Initrd"
msgstr "Initrd"

#: ../../any.pm_.c:293
msgid "Read-write"
msgstr "Čitaj-piši"

#: ../../any.pm_.c:300
msgid "Table"
msgstr "Tablica"

#: ../../any.pm_.c:301
msgid "Unsafe"
msgstr "Nesigurno"

#: ../../any.pm_.c:308 ../../any.pm_.c:313 ../../any.pm_.c:315
msgid "Label"
msgstr "Oznaka"

#: ../../any.pm_.c:310 ../../any.pm_.c:320 ../../harddrake/v4l.pm_.c:201
msgid "Default"
msgstr "Uobičajeno"

#: ../../any.pm_.c:317
msgid "Initrd-size"
msgstr "Initrd-veličina"

#: ../../any.pm_.c:319
msgid "NoVideo"
msgstr "NemaVidea"

#: ../../any.pm_.c:327
msgid "Remove entry"
msgstr "Ukloni zapis"

#: ../../any.pm_.c:330
msgid "Empty label not allowed"
msgstr "Prazna oznaka nije dozvoljena"

#: ../../any.pm_.c:331
msgid "You must specify a kernel image"
msgstr "Morate odrediti sliku kernela"

#: ../../any.pm_.c:331
msgid "You must specify a root partition"
msgstr "Morate odrediti root particiju"

#: ../../any.pm_.c:332
msgid "This label is already used"
msgstr "Ova oznaka već postoji"

#: ../../any.pm_.c:656
#, c-format
msgid "Found %s %s interfaces"
msgstr "Pronašao sam %s %s međusklopova"

#: ../../any.pm_.c:657
msgid "Do you have another one?"
msgstr "Da li imate još koji?"

#: ../../any.pm_.c:658
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Da li imate %s međusklopova?"

#: ../../any.pm_.c:660 ../../any.pm_.c:823 ../../interactive.pm_.c:132
#: ../../my_gtk.pm_.c:286
msgid "No"
msgstr "Ne"

#: ../../any.pm_.c:660 ../../any.pm_.c:822 ../../interactive.pm_.c:132
#: ../../my_gtk.pm_.c:286
msgid "Yes"
msgstr "Da"

#: ../../any.pm_.c:661
msgid "See hardware info"
msgstr "Pokaži info o hardveru"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../any.pm_.c:677
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Instaliram upravljački program %s za karticu %s"

#: ../../any.pm_.c:678
#, c-format
msgid "(module %s)"
msgstr "(modul %s)"

#: ../../any.pm_.c:689
#, fuzzy, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"Sada možete unijeti opcije za modul %s.\n"
"Primjetite da svaka adresa treba biti unešena sa prefiksom 0x kao '0x123'"

#: ../../any.pm_.c:695
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Sada možete unijeti postavke za modul %s.\n"
"Postavke su formata ``ime=vrijednost ime2=vrijednost2...''.\n"
"Na primjer, ``io=0x300 irq=7''"

#: ../../any.pm_.c:697
msgid "Module options:"
msgstr "Postavke modula:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../any.pm_.c:709
#, c-format
msgid "Which %s driver should I try?"
msgstr "Koji %s upravljački program želite isprobati?"

#: ../../any.pm_.c:718
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"U nekim slučajevima, %s upravljački program treba dodatne informacije da bi "
"radio\n"
"ispravno, iako normalno radi i bez toga. Da li želite specifirati te "
"dodatne\n"
"opcije za njega ili želite dozvoliti upravljačkom programu da isproba vaše\n"
"računalo za informacije koje treba? Ponekad, isprobavanje može zamrznuti\n"
"vaše računlo, ali ne bi trebalo izazvati nikakvu štetu."

#: ../../any.pm_.c:722
msgid "Autoprobe"
msgstr "Auto. ispitaj"

#: ../../any.pm_.c:722
msgid "Specify options"
msgstr "Odredi postavke"

#: ../../any.pm_.c:734
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Učitavanje modula %s nije uspjelo.\n"
"Da li želite pokušati ponovo sa drugim parametrima?"

#: ../../any.pm_.c:750
msgid "access to X programs"
msgstr "pristup X programima"

#: ../../any.pm_.c:751
msgid "access to rpm tools"
msgstr "pristup rpm alatima"

#: ../../any.pm_.c:752
msgid "allow \"su\""
msgstr "dozvoli \"su\""

#: ../../any.pm_.c:753
msgid "access to administrative files"
msgstr "pristup administracijskim datotekama"

#: ../../any.pm_.c:754
#, fuzzy
msgid "access to network tools"
msgstr "pristup rpm alatima"

#: ../../any.pm_.c:755
#, fuzzy
msgid "access to compilation tools"
msgstr "pristup rpm alatima"

#: ../../any.pm_.c:760
#, c-format
msgid "(already added %s)"
msgstr "(već postoji %s)"

#: ../../any.pm_.c:765
msgid "This password is too simple"
msgstr "Lozinka je prejednostavna"

#: ../../any.pm_.c:766
msgid "Please give a user name"
msgstr "Molim dajte korisniku korisničko ime"

#: ../../any.pm_.c:767
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Korisničko ime može sadržavati samo mala slova, brojeve, `-' i `_'"

#: ../../any.pm_.c:768
#, fuzzy
msgid "The user name is too long"
msgstr "Ovaj korisnik već postoji"

#: ../../any.pm_.c:769
msgid "This user name is already added"
msgstr "Ovaj korisnik već postoji"

#: ../../any.pm_.c:773
msgid "Add user"
msgstr "Dodaj korisnika"

#: ../../any.pm_.c:774
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Unesite korisnika\n"
"%s"

#: ../../any.pm_.c:775
msgid "Accept user"
msgstr "Prihvati korisnika"

#: ../../any.pm_.c:786
msgid "Real name"
msgstr "Puno ime"

#: ../../any.pm_.c:787 ../../printerdrake.pm_.c:849
#: ../../printerdrake.pm_.c:964
msgid "User name"
msgstr "Korisničko ime"

#: ../../any.pm_.c:790
msgid "Shell"
msgstr "Ljuska"

#: ../../any.pm_.c:792
msgid "Icon"
msgstr "Ikona"

#: ../../any.pm_.c:819
msgid "Autologin"
msgstr "Auto-prijava"

#: ../../any.pm_.c:820
msgid ""
"I can set up your computer to automatically log on one user.\n"
"Do you want to use this feature?"
msgstr ""
"Mogu podesiti da se vaše računalo automatski prijavi kao jedan korisnik.\n"
"Da li želite koristiti tu pogodnost?"

#: ../../any.pm_.c:824
msgid "Choose the default user:"
msgstr "Izaberite uobičajenog korisnika:"

#: ../../any.pm_.c:825
msgid "Choose the window manager to run:"
msgstr "Izaberite prozorski upravitelj koji želite pokrenuti:"

#: ../../any.pm_.c:840
msgid "Please choose a language to use."
msgstr "Molim izaberite jezik koji želite koristiti."

#: ../../any.pm_.c:842
msgid ""
"Mandrake Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr "Možete izabrati druge jezike koji će biti dostupni nakon instalacije"

#: ../../any.pm_.c:856 ../../install_steps_interactive.pm_.c:689
#: ../../standalone/drakxtv_.c:73
msgid "All"
msgstr "Sve"

#: ../../any.pm_.c:977
msgid "Allow all users"
msgstr "Dozvoli svim korisnicima"

#: ../../any.pm_.c:977
msgid "No sharing"
msgstr "Nema dijeljenja"

#: ../../any.pm_.c:987 ../../install_any.pm_.c:1183 ../../standalone.pm_.c:58
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Paket %s treba instalirati. Da li ga želite instalirati?"

#: ../../any.pm_.c:990
msgid ""
"You can export using NFS or Samba. Please select which you'd like to use."
msgstr "Možete izvesti koristeći NFS ili Sambu. Koji od njih želite"

#: ../../any.pm_.c:998 ../../install_any.pm_.c:1188 ../../standalone.pm_.c:63
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Nužni paket %s nedostaje"

#: ../../any.pm_.c:1004
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Da li želite dozvoliti korisnicima da izvezu neke direktorije u "
"njihivompolaznom direktoriju?\n"
"Dozvoljavanjem navedenoga ćete dozvoliti korisnicima da jednostavno kliknuna "
"\"Dijeljenje\"\n"
" u konqueroru i nautilusu.\n"
"\n"
"\"Proizvoljno\" će omogućiti dozvoljavanje po korisniku.\n"

#: ../../any.pm_.c:1018
msgid "Launch userdrake"
msgstr "Pokreni userdrake"

#: ../../any.pm_.c:1020
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user in this group."
msgstr ""
"Dijeljenje po korisniku koristi grupu \"fileshare\". \n"
"Možete koristiti userdrake za dodavanje korisnika u navedenu grupu."

#: ../../any.pm_.c:1071
msgid "Welcome To Crackers"
msgstr "Dobrodošli Crackeri"

#: ../../any.pm_.c:1072
msgid "Poor"
msgstr "Slab"

#: ../../any.pm_.c:1073 ../../mouse.pm_.c:31
msgid "Standard"
msgstr "Standardno"

#: ../../any.pm_.c:1074
msgid "High"
msgstr "Visok"

#: ../../any.pm_.c:1075
msgid "Higher"
msgstr "Viši"

#: ../../any.pm_.c:1076
msgid "Paranoid"
msgstr "Paranoidan"

#: ../../any.pm_.c:1079
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive: it must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Ova razina se treba koristiti sa pažnjom. Ona čini vaš sustav mnogo lakšim "
"za korištenje,\n"
"ali vrlo osjetljiv: ne smije biti korišten za računala koja su povezana u "
"mreži ili na Internet. Naime, nema lozinke za pristup."

#: ../../any.pm_.c:1082
msgid ""
"Password are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Lozinke su sada uključene međutim još ne preporučam korištenje ovog računala "
"u mrežnom okolišu."

#: ../../any.pm_.c:1083
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"Ovo je standardna sigurnosna razina preporučena za računala koja će biti "
"korištena za spajanje na Internet kao klijent."

#: ../../any.pm_.c:1084
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""
"Već postoje neka ograničenja i više automatskih provjera se pokreće svake "
"noći."

#: ../../any.pm_.c:1085
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"Sa ovom sigurnosnom razinom, korištenje ovog sustava kao poslužitelj postaje "
"moguće.\n"
"Sigurnost je sada toliko visoka da se sustav može koristiti kao poslužitelj\n"
"koji prima zahtjeve od mnogo klijenata. Upozorenje: ako je vaše računalo "
"samo klijent na Internetu, bolje da izaberete nižu razinu."

#: ../../any.pm_.c:1088
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"Temeljeno na prijašnjoj razini, ali je sustav potpuno zatvoren.\n"
"Sigurnosne značajke su na maksimumu."

#: ../../any.pm_.c:1094
#, fuzzy
msgid "DrakSec Basic Options"
msgstr "Opcije"

#: ../../any.pm_.c:1095
#, fuzzy
msgid "Please choose the desired security level"
msgstr "Izaberite sigurnosni nivo"

#: ../../any.pm_.c:1098
msgid "Security level"
msgstr "Sigurnosna razina"

#: ../../any.pm_.c:1100
msgid "Use libsafe for servers"
msgstr "Koristi libsafe za poslužitelje"

#: ../../any.pm_.c:1101
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""
"Biblioteka koja štiti od prekoračenja spremnika i format string napada."

#: ../../any.pm_.c:1102
msgid "Security Administrator (login or email)"
msgstr ""

#: ../../any.pm_.c:1189
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm_.c:381
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system in the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Dobro dosli u %s izbornik operativnih sustava!\n"
"\n"
"Izaberite operativni sustav u popisu iznad ili\n"
"pričekajte %d sekundi za uobičajeno podizanje.\n"
"\n"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
# The lines must fit on screen, aka length < 80
# and only one line per string for the GRUB messages
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:938
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Dobro dosli u GRUB izbornik operativnih sustava!"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:941
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Za mijenjanje izabranog sustava pritisnite tipke %c i %c."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:944
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "Pritisnite ENTER za bootiranje izabranog OS, 'e' za promjenu"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:947
msgid "commands before booting, or 'c' for a command-line."
msgstr "naredbe prije bootiranja ili 'c' za komandnu liniju."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:950
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "Osvjetljeni zapis biti će bootiran automatski za %d sekundi."

#: ../../bootloader.pm_.c:954
msgid "not enough room in /boot"
msgstr "nema dovoljno mjesta u /boot"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
#: ../../bootloader.pm_.c:1054
msgid "Desktop"
msgstr "Radna površina"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#: ../../bootloader.pm_.c:1056
msgid "Start Menu"
msgstr "Start Menu"

#: ../../bootloader.pm_.c:1075
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Ne možete instalirati bootloader na %s particiju\n"

#: ../../bootlook.pm_.c:46 ../../standalone/drakperm_.c:16
#: ../../standalone/draksplash_.c:25
msgid "no help implemented yet.\n"
msgstr "nema još implementirane pomoći.\n"

#: ../../bootlook.pm_.c:62
msgid "Boot Style Configuration"
msgstr "Postava Stila Podizanja"

#: ../../bootlook.pm_.c:79 ../../harddrake/ui.pm_.c:62
#: ../../harddrake/ui.pm_.c:63 ../../standalone/drakfloppy_.c:81
#: ../../standalone/logdrake_.c:101
msgid "/_File"
msgstr "/_Datoteka"

#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:82
#: ../../standalone/logdrake_.c:107
msgid "/File/_Quit"
msgstr "/Datoteka/_Izlaz"

#: ../../bootlook.pm_.c:80 ../../harddrake/ui.pm_.c:63
#: ../../standalone/drakfloppy_.c:82 ../../standalone/logdrake_.c:107
msgid "<control>Q"
msgstr "<control>Q"

#: ../../bootlook.pm_.c:91
msgid "NewStyle Categorizing Monitor"
msgstr "Novi stil kategoriziranja Monitora"

#: ../../bootlook.pm_.c:92
msgid "NewStyle Monitor"
msgstr "NoviStil Monitora"

#: ../../bootlook.pm_.c:93
msgid "Traditional Monitor"
msgstr "Tradicionalni Monitor"

#: ../../bootlook.pm_.c:94
msgid "Traditional Gtk+ Monitor"
msgstr "Tradicionalni Gtk+ Monitor"

#: ../../bootlook.pm_.c:95
msgid "Launch Aurora at boot time"
msgstr "Pokreni Auroru pri podizanju"

#: ../../bootlook.pm_.c:98
msgid "Lilo/grub mode"
msgstr "Lilo/grub mod"

#: ../../bootlook.pm_.c:98
msgid "Yaboot mode"
msgstr "Yaboot mod"

#: ../../bootlook.pm_.c:148
#, fuzzy
msgid "Install themes"
msgstr "Instaliraj sustav"

#: ../../bootlook.pm_.c:149
msgid "Display theme under console"
msgstr ""

#: ../../bootlook.pm_.c:150
#, fuzzy
msgid "Create new theme"
msgstr "Stvori novu particiju"

#: ../../bootlook.pm_.c:193
#, c-format
msgid "Backup %s to %s.old"
msgstr ""

#: ../../bootlook.pm_.c:194 ../../bootlook.pm_.c:197 ../../bootlook.pm_.c:200
#: ../../bootlook.pm_.c:230 ../../bootlook.pm_.c:232 ../../bootlook.pm_.c:242
#: ../../bootlook.pm_.c:251 ../../bootlook.pm_.c:258
#: ../../diskdrake/dav.pm_.c:73 ../../diskdrake/hd_gtk.pm_.c:116
#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/interactive.pm_.c:355
#: ../../diskdrake/interactive.pm_.c:469 ../../diskdrake/interactive.pm_.c:474
#: ../../diskdrake/smbnfs_gtk.pm_.c:45 ../../fsedit.pm_.c:239
#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
#: ../../interactive/http.pm_.c:119 ../../interactive/http.pm_.c:120
#: ../../standalone/draksplash_.c:32
msgid "Error"
msgstr "Greška"

#: ../../bootlook.pm_.c:194
msgid "unable to backup lilo message"
msgstr ""

#: ../../bootlook.pm_.c:196
#, fuzzy, c-format
msgid "Copy %s to %s"
msgstr "Kopiram %s"

#: ../../bootlook.pm_.c:197
msgid "can't change lilo message"
msgstr ""

#: ../../bootlook.pm_.c:200
msgid "Lilo message not found"
msgstr ""

#: ../../bootlook.pm_.c:230
msgid "Can't write /etc/sysconfig/bootsplash."
msgstr ""

#: ../../bootlook.pm_.c:230
#, fuzzy, c-format
msgid "Write %s"
msgstr "XFree %s"

#: ../../bootlook.pm_.c:232
msgid ""
"Can't write /etc/sysconfig/bootsplash\n"
"File not found."
msgstr ""

#: ../../bootlook.pm_.c:243
#, c-format
msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
msgstr ""

#: ../../bootlook.pm_.c:246
#, c-format
msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
msgstr ""

#: ../../bootlook.pm_.c:252
msgid ""
"Can't relaunch LiLo!\n"
"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""

#: ../../bootlook.pm_.c:256
msgid "Relaunch 'lilo'"
msgstr ""

#: ../../bootlook.pm_.c:258 ../../standalone/draksplash_.c:161
#: ../../standalone/draksplash_.c:330 ../../standalone/draksplash_.c:454
#, fuzzy
msgid "Notice"
msgstr "NemaVidea"

#: ../../bootlook.pm_.c:259
msgid "LiLo and Bootsplash themes installation successfull"
msgstr ""

#: ../../bootlook.pm_.c:259
#, fuzzy
msgid "Theme installation failed!"
msgstr "Odaberite razred instalacije"

#: ../../bootlook.pm_.c:268
#, c-format
msgid ""
"You are currently using %s as your boot manager.\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Trenutno koristite %s kao Upravitelj Boot-a.\n"
"Pritisnite na Podesi za pokretanje čarobnjaka za postavljanje."

#: ../../bootlook.pm_.c:270 ../../standalone/drakbackup_.c:2425
#: ../../standalone/drakbackup_.c:2435 ../../standalone/drakbackup_.c:2445
#: ../../standalone/drakbackup_.c:2453 ../../standalone/drakgw_.c:530
msgid "Configure"
msgstr "Podesi"

#: ../../bootlook.pm_.c:277
#, fuzzy
msgid "Splash selection"
msgstr "Spremi odabir paketa"

#: ../../bootlook.pm_.c:280
msgid "Themes"
msgstr ""

#: ../../bootlook.pm_.c:282
msgid ""
"\n"
"Select a theme for\n"
"lilo and bootsplash,\n"
"you can choose\n"
"them separatly"
msgstr ""

#: ../../bootlook.pm_.c:285
msgid "Lilo screen"
msgstr ""

#: ../../bootlook.pm_.c:290
msgid "Bootsplash"
msgstr ""

#: ../../bootlook.pm_.c:325
msgid "System mode"
msgstr "Sistemski mod"

#: ../../bootlook.pm_.c:327
msgid "Launch the graphical environment when your system starts"
msgstr "Pokreni X-Window sustav pri podizanju"

#: ../../bootlook.pm_.c:332
msgid "No, I don't want autologin"
msgstr "Ne, ne želim automatsko prijavljivanje"

#: ../../bootlook.pm_.c:334
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "Da, želim automatsko prijavljivanje sa ovim korisnikom i okružjem"

#: ../../bootlook.pm_.c:344 ../../network/netconnect.pm_.c:101
#: ../../standalone/drakTermServ_.c:173 ../../standalone/drakTermServ_.c:300
#: ../../standalone/drakTermServ_.c:405 ../../standalone/drakbackup_.c:4189
#: ../../standalone/drakbackup_.c:4950 ../../standalone/drakconnect_.c:108
#: ../../standalone/drakconnect_.c:140 ../../standalone/drakconnect_.c:296
#: ../../standalone/drakconnect_.c:435 ../../standalone/drakconnect_.c:521
#: ../../standalone/drakconnect_.c:564 ../../standalone/drakconnect_.c:667
#: ../../standalone/drakfloppy_.c:376 ../../standalone/drakfont_.c:612
#: ../../standalone/drakfont_.c:799 ../../standalone/drakfont_.c:876
#: ../../standalone/drakfont_.c:963 ../../standalone/logdrake_.c:519
msgid "OK"
msgstr "U redu"

#: ../../bootlook.pm_.c:414
#, c-format
msgid "can not open /etc/inittab for reading: %s"
msgstr "ne mogu otvoriti /etc/inittab za čitanje: %s"

#: ../../common.pm_.c:94
msgid "GB"
msgstr "GB"

#: ../../common.pm_.c:94
msgid "KB"
msgstr "KB"

#: ../../common.pm_.c:94
msgid "MB"
msgstr "MB"

#: ../../common.pm_.c:102
msgid "TB"
msgstr "TB"

#: ../../common.pm_.c:110
#, c-format
msgid "%d minutes"
msgstr "%d minuta"

#: ../../common.pm_.c:112
msgid "1 minute"
msgstr "1 minuta"

#: ../../common.pm_.c:114
#, c-format
msgid "%d seconds"
msgstr "%d sekundi"

#: ../../common.pm_.c:159
msgid "Can't make screenshots before partitioning"
msgstr "Ne mogu napraviti screenshotove prije particioniranja"

#: ../../common.pm_.c:166
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "Screenshotovi će biti raspoloživi poslije instalaciju u %s"

#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:28 ../../network/tools.pm_.c:104
#: ../../network/tools.pm_.c:113
msgid "France"
msgstr "Francuska"

#: ../../crypto.pm_.c:15
msgid "Costa Rica"
msgstr "Kosta Rika"

#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 ../../network/tools.pm_.c:104
#: ../../network/tools.pm_.c:116
msgid "Belgium"
msgstr "Belgija"

#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
msgid "Czech Republic"
msgstr "Češka Republika"

#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
msgid "Germany"
msgstr "Njemačka"

#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
msgid "Greece"
msgstr "Grčka"

#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:33
msgid "Norway"
msgstr "Norveška"

#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:34
msgid "Sweden"
msgstr "Švedska"

#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 ../../network/tools.pm_.c:104
#: ../../network/tools.pm_.c:114
msgid "Netherlands"
msgstr "Nizozemska"

#: ../../crypto.pm_.c:23 ../../crypto.pm_.c:37 ../../network/tools.pm_.c:104
#: ../../network/tools.pm_.c:115 ../../standalone/drakxtv_.c:68
msgid "Italy"
msgstr "Italija"

#: ../../crypto.pm_.c:24 ../../crypto.pm_.c:38
msgid "Austria"
msgstr "Austrija"

#: ../../crypto.pm_.c:35 ../../crypto.pm_.c:61 ../../network/tools.pm_.c:104
#: ../../network/tools.pm_.c:117
msgid "United States"
msgstr "Sjedinjene Američke Države"

#: ../../diskdrake/dav.pm_.c:23
#, fuzzy
msgid "New"
msgstr "novi"

#: ../../diskdrake/dav.pm_.c:59 ../../diskdrake/interactive.pm_.c:388
#: ../../diskdrake/smbnfs_gtk.pm_.c:81
msgid "Unmount"
msgstr "Demontiraj"

#: ../../diskdrake/dav.pm_.c:60 ../../diskdrake/interactive.pm_.c:385
#: ../../diskdrake/smbnfs_gtk.pm_.c:82
msgid "Mount"
msgstr "Montiraj"

#: ../../diskdrake/dav.pm_.c:61
msgid "Server"
msgstr "Poslužitelj"

#: ../../diskdrake/dav.pm_.c:62 ../../diskdrake/interactive.pm_.c:379
#: ../../diskdrake/interactive.pm_.c:568 ../../diskdrake/interactive.pm_.c:595
#: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/removable_gtk.pm_.c:15
#: ../../diskdrake/smbnfs_gtk.pm_.c:85
msgid "Mount point"
msgstr "Točka montiranja"

#: ../../diskdrake/dav.pm_.c:81
#, fuzzy
msgid "Please enter the WebDAV server URL"
msgstr "Upišite brzinu cd snimača"

#: ../../diskdrake/dav.pm_.c:84
msgid "The URL must begin with http:// or https://"
msgstr ""

#: ../../diskdrake/dav.pm_.c:105
#, fuzzy
msgid "Server: "
msgstr "Poslužitelj"

#: ../../diskdrake/dav.pm_.c:106 ../../diskdrake/interactive.pm_.c:440
#: ../../diskdrake/interactive.pm_.c:1089
#: ../../diskdrake/interactive.pm_.c:1164
msgid "Mount point: "
msgstr "Mjesto montiranja:"

#: ../../diskdrake/dav.pm_.c:107 ../../diskdrake/interactive.pm_.c:1170
#, c-format
msgid "Options: %s"
msgstr "Opcije: %s"

#: ../../diskdrake/hd_gtk.pm_.c:94
msgid "Please make a backup of your data first"
msgstr "Prvo napravite backup podataka"

#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:934
#: ../../diskdrake/interactive.pm_.c:943
#: ../../diskdrake/interactive.pm_.c:1009
msgid "Read carefully!"
msgstr "Pročitajte pažljivo!"

#: ../../diskdrake/hd_gtk.pm_.c:97
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Ukoliko želite koristiti aboot morate ostaviti dovoljno mjesta (npr. 2048 "
"sektora) na\n"
"početku diska"

#: ../../diskdrake/hd_gtk.pm_.c:151
msgid "Wizard"
msgstr "Čarobnjak"

#: ../../diskdrake/hd_gtk.pm_.c:184 ../../diskdrake/removable_gtk.pm_.c:24
msgid "Choose action"
msgstr "Izaberite akciju"

#: ../../diskdrake/hd_gtk.pm_.c:188
msgid ""
"You have one big FAT partition\n"
"(generally used by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Vaš sustav sadrži samo jednu veliku particiju.\n"
"(Microsoft DOS/Windows obično koristi jednu particiju).\n"
"Preporučam da promijenite veličinu particije\n"
"(kliknite prvo na particiju te onda na \"Promijeni veličinu\")"

#: ../../diskdrake/hd_gtk.pm_.c:191
msgid "Please click on a partition"
msgstr "Molim kliknite na particiju"

#: ../../diskdrake/hd_gtk.pm_.c:205 ../../diskdrake/smbnfs_gtk.pm_.c:69
#: ../../install_steps_gtk.pm_.c:465
msgid "Details"
msgstr "Detalji"

#: ../../diskdrake/hd_gtk.pm_.c:252
#, fuzzy
msgid "No hard drives found"
msgstr ""
"Nije pronađen lokalni pisač!\n"
"\n"

#: ../../diskdrake/hd_gtk.pm_.c:323
msgid "Ext2"
msgstr "Ext2"

#: ../../diskdrake/hd_gtk.pm_.c:323
msgid "FAT"
msgstr "FAT"

#: ../../diskdrake/hd_gtk.pm_.c:323
msgid "HFS"
msgstr "HFS"

#: ../../diskdrake/hd_gtk.pm_.c:323
msgid "Journalised FS"
msgstr "Journalised FS"

#: ../../diskdrake/hd_gtk.pm_.c:323
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake/hd_gtk.pm_.c:323
msgid "Swap"
msgstr "Swap"

#: ../../diskdrake/hd_gtk.pm_.c:324 ../../diskdrake/interactive.pm_.c:1105
msgid "Empty"
msgstr "Prazno"

#: ../../diskdrake/hd_gtk.pm_.c:324 ../../install_steps_gtk.pm_.c:325
#: ../../install_steps_gtk.pm_.c:383 ../../mouse.pm_.c:165
#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:1752
msgid "Other"
msgstr "Ostali"

#: ../../diskdrake/hd_gtk.pm_.c:328
msgid "Filesystem types:"
msgstr "Vrste datotečnih sustava:"

#: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:402
msgid "Create"
msgstr "Napravi"

#: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:380
#: ../../diskdrake/interactive.pm_.c:531 ../../diskdrake/removable.pm_.c:26
#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
msgid "Type"
msgstr "Vrsta"

#: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/hd_gtk.pm_.c:347
#, c-format
msgid "Use ``%s'' instead"
msgstr "Umjesto toga koristi ``%s''"

#: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:389
msgid "Delete"
msgstr "Obriši"

#: ../../diskdrake/hd_gtk.pm_.c:351
msgid "Use ``Unmount'' first"
msgstr "Prvo pritisnite ``Demontiraj''"

#: ../../diskdrake/hd_gtk.pm_.c:352 ../../diskdrake/interactive.pm_.c:518
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Nakon mijenjanja tipa particije %s svi podaci na ovoj particiji biti će "
"obrisani"

#: ../../diskdrake/interactive.pm_.c:174
msgid "Choose a partition"
msgstr "Izaberite particiju"

#: ../../diskdrake/interactive.pm_.c:174
msgid "Choose another partition"
msgstr "Izaberite drugu particiju"

#: ../../diskdrake/interactive.pm_.c:199
msgid "Exit"
msgstr "Izlaz"

#: ../../diskdrake/interactive.pm_.c:221
msgid "Toggle to expert mode"
msgstr "Normalno > Ekspert"

#: ../../diskdrake/interactive.pm_.c:221
msgid "Toggle to normal mode"
msgstr "Prebaci u normalni mod"

#: ../../diskdrake/interactive.pm_.c:221
msgid "Undo"
msgstr "Vrati"

#: ../../diskdrake/interactive.pm_.c:240
msgid "Continue anyway?"
msgstr "Da ipak nastavim?"

#: ../../diskdrake/interactive.pm_.c:245
msgid "Quit without saving"
msgstr "Da završim bez spremanja"

#: ../../diskdrake/interactive.pm_.c:245
msgid "Quit without writing the partition table?"
msgstr "Da završim bez zapisivanje particijske tablice?"

#: ../../diskdrake/interactive.pm_.c:250
msgid "Do you want to save /etc/fstab modifications"
msgstr "Da li želite spremiti /etc/fstab promjene?"

#: ../../diskdrake/interactive.pm_.c:263
msgid "Auto allocate"
msgstr "Raspodijeli automatski"

#: ../../diskdrake/interactive.pm_.c:263
msgid "Clear all"
msgstr "Očisti sve"

#: ../../diskdrake/interactive.pm_.c:263
#: ../../install_steps_interactive.pm_.c:214
msgid "More"
msgstr "Više"

#: ../../diskdrake/interactive.pm_.c:267
msgid "Hard drive information"
msgstr "Hard disk informacije"

#: ../../diskdrake/interactive.pm_.c:298
msgid "All primary partitions are used"
msgstr "Sve primarne particije su iskorištene"

#: ../../diskdrake/interactive.pm_.c:299
msgid "I can't add any more partition"
msgstr "Ne mogu dodati niti jednu dodatnu particiju"

#: ../../diskdrake/interactive.pm_.c:300
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Ako želite dodati još koju particiju molim obrišite jednu od particija kako "
"bi\n"
"mogli stvoriti jednu extended particiju."

#: ../../diskdrake/interactive.pm_.c:310
msgid "Save partition table"
msgstr "Spremi particijsku tabelu"

#: ../../diskdrake/interactive.pm_.c:311
msgid "Restore partition table"
msgstr "Vrati particijsku tabelu"

#: ../../diskdrake/interactive.pm_.c:312
msgid "Rescue partition table"
msgstr "Spasi particijsku tabelu"

#: ../../diskdrake/interactive.pm_.c:314
msgid "Reload partition table"
msgstr "Ponovno učitaj particijsku tabelu"

#: ../../diskdrake/interactive.pm_.c:319
msgid "Removable media automounting"
msgstr "Automatsko montiranje prenosivog medija"

#: ../../diskdrake/interactive.pm_.c:328 ../../diskdrake/interactive.pm_.c:348
msgid "Select file"
msgstr "Odaberite datoteku"

#: ../../diskdrake/interactive.pm_.c:335
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Backup particijske tablice nema istu veličinu\n"
"Da ipak nastavim?"

#: ../../diskdrake/interactive.pm_.c:349
msgid "Warning"
msgstr "Upozorenje"

#: ../../diskdrake/interactive.pm_.c:350
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Umetnite disketu u pogon\n"
"Svi podaci na disketi biti će izbrisani"

#: ../../diskdrake/interactive.pm_.c:361
msgid "Trying to rescue partition table"
msgstr "Pokušavam spasiti particijsku tablicu"

#: ../../diskdrake/interactive.pm_.c:367
msgid "Detailed information"
msgstr "Detaljne informacije"

#: ../../diskdrake/interactive.pm_.c:382 ../../diskdrake/interactive.pm_.c:662
msgid "Resize"
msgstr "Promijeni veličinu"

#: ../../diskdrake/interactive.pm_.c:383 ../../diskdrake/interactive.pm_.c:715
msgid "Move"
msgstr "Premjesti"

#: ../../diskdrake/interactive.pm_.c:384
msgid "Format"
msgstr "Formatiraj"

#: ../../diskdrake/interactive.pm_.c:386
msgid "Add to RAID"
msgstr "Dodaj RAID-u"

#: ../../diskdrake/interactive.pm_.c:387
msgid "Add to LVM"
msgstr "Dodaj LVM-u"

#: ../../diskdrake/interactive.pm_.c:390
msgid "Remove from RAID"
msgstr "Ukloni sa RAID-a"

#: ../../diskdrake/interactive.pm_.c:391
msgid "Remove from LVM"
msgstr "Ukloni sa LVM-a"

#: ../../diskdrake/interactive.pm_.c:392
msgid "Modify RAID"
msgstr "Promijeni RAID"

#: ../../diskdrake/interactive.pm_.c:393
msgid "Use for loopback"
msgstr "Koristi za loopback"

#: ../../diskdrake/interactive.pm_.c:433
msgid "Create a new partition"
msgstr "Stvori novu particiju"

#: ../../diskdrake/interactive.pm_.c:436
msgid "Start sector: "
msgstr "Početni sektor:"

#: ../../diskdrake/interactive.pm_.c:438 ../../diskdrake/interactive.pm_.c:815
msgid "Size in MB: "
msgstr "Veličina u MB:"

#: ../../diskdrake/interactive.pm_.c:439 ../../diskdrake/interactive.pm_.c:816
msgid "Filesystem type: "
msgstr "Vrsta datotečnog sustava:"

#: ../../diskdrake/interactive.pm_.c:444
msgid "Preference: "
msgstr "Postavke:"

#: ../../diskdrake/interactive.pm_.c:469
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""

#: ../../diskdrake/interactive.pm_.c:499
msgid "Remove the loopback file?"
msgstr "Ukloniti loopback datoteku?"

#: ../../diskdrake/interactive.pm_.c:529
msgid "Change partition type"
msgstr "Mijenjam tip particije"

#: ../../diskdrake/interactive.pm_.c:530 ../../diskdrake/removable.pm_.c:48
msgid "Which filesystem do you want?"
msgstr "Koji datotečni sustav želite?"

#: ../../diskdrake/interactive.pm_.c:536
msgid "Switching from ext2 to ext3"
msgstr "Mijenjam iz ext2 u ext3"

#: ../../diskdrake/interactive.pm_.c:566
#, c-format
msgid "Where do you want to mount loopback file %s?"
msgstr "Gdje želite montirati loopback datoteku %s?"

#: ../../diskdrake/interactive.pm_.c:567
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Gdje želite montirati uređaj %s?"

#: ../../diskdrake/interactive.pm_.c:573
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Ne mogu maknuti točku za montiranje zato što se ova particija koristi za "
"loop back.\n"
"Uklonite loopback prvo"

#: ../../diskdrake/interactive.pm_.c:594
#, fuzzy, c-format
msgid "Where do you want to mount %s?"
msgstr "Gdje želite montirati uređaj %s?"

#: ../../diskdrake/interactive.pm_.c:618
msgid "Computing FAT filesystem bounds"
msgstr "Izračunavam granice fat datotečnog sustava"

#: ../../diskdrake/interactive.pm_.c:618 ../../diskdrake/interactive.pm_.c:677
#: ../../install_interactive.pm_.c:133
msgid "Resizing"
msgstr "Mijenjam veličinu"

#: ../../diskdrake/interactive.pm_.c:650
msgid "This partition is not resizeable"
msgstr "Ova particija nije promjenjiva u veličini"

#: ../../diskdrake/interactive.pm_.c:655
msgid "All data on this partition should be backed-up"
msgstr "Preporučam da prvo backupirate sve podatke s ove particije"

#: ../../diskdrake/interactive.pm_.c:657
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"Nakon mijenjanja veličine particije %s svi podaci na ovoj particiji biti će "
"izgubljeni"

#: ../../diskdrake/interactive.pm_.c:662
msgid "Choose the new size"
msgstr "Odaberite novu veličinu"

#: ../../diskdrake/interactive.pm_.c:663
msgid "New size in MB: "
msgstr "Nova veličina u MB: "

#: ../../diskdrake/interactive.pm_.c:716
msgid "Which disk do you want to move it to?"
msgstr "Na koji disk se želite premjestiti?"

#: ../../diskdrake/interactive.pm_.c:717
msgid "Sector"
msgstr "Sektor"

#: ../../diskdrake/interactive.pm_.c:718
msgid "Which sector do you want to move it to?"
msgstr "Na koji se sektor želite premjestiti?"

#: ../../diskdrake/interactive.pm_.c:721
msgid "Moving"
msgstr "Premještam"

#: ../../diskdrake/interactive.pm_.c:721
msgid "Moving partition..."
msgstr "Premještam particiju..."

#: ../../diskdrake/interactive.pm_.c:738
msgid "Choose an existing RAID to add to"
msgstr "Izaberite postojeći RAID na koji želite dodati "

#: ../../diskdrake/interactive.pm_.c:739 ../../diskdrake/interactive.pm_.c:756
msgid "new"
msgstr "novi"

#: ../../diskdrake/interactive.pm_.c:754
msgid "Choose an existing LVM to add to"
msgstr "Izaberite postojeći LVM na koji želite dodati "

#: ../../diskdrake/interactive.pm_.c:759
msgid "LVM name?"
msgstr "LVM ime?"

#: ../../diskdrake/interactive.pm_.c:800
msgid "This partition can't be used for loopback"
msgstr "Ova particija se ne može koristiti za loopback"

#: ../../diskdrake/interactive.pm_.c:813
msgid "Loopback"
msgstr "Loopback"

#: ../../diskdrake/interactive.pm_.c:814
msgid "Loopback file name: "
msgstr "Ime loopback datoteke:"

#: ../../diskdrake/interactive.pm_.c:819
msgid "Give a file name"
msgstr "Dajte ime datoteke"

#: ../../diskdrake/interactive.pm_.c:822
msgid "File already used by another loopback, choose another one"
msgstr ""
"Datoteku koristi neki drugi loopback. Molim izaberite neku drugu datoteku"

#: ../../diskdrake/interactive.pm_.c:823
msgid "File already exists. Use it?"
msgstr "Datoteka već postoji. Da li da nju upotrijebim?"

#: ../../diskdrake/interactive.pm_.c:846
msgid "Mount options"
msgstr "Opcije montiranja"

#: ../../diskdrake/interactive.pm_.c:853
msgid "Various"
msgstr "Razno"

#: ../../diskdrake/interactive.pm_.c:917 ../../standalone/drakfloppy_.c:103
msgid "device"
msgstr "uređaj"

#: ../../diskdrake/interactive.pm_.c:918
msgid "level"
msgstr "razina"

#: ../../diskdrake/interactive.pm_.c:919
msgid "chunk size"
msgstr "chunk veličina"

#: ../../diskdrake/interactive.pm_.c:934
msgid "Be careful: this operation is dangerous."
msgstr "Budite oprezni: ova operacija je opasna"

#: ../../diskdrake/interactive.pm_.c:949
msgid "What type of partitioning?"
msgstr "Kakav tip particioniranja?"

#: ../../diskdrake/interactive.pm_.c:965
#, fuzzy, c-format
msgid "The package %s is needed. Install it?"
msgstr "Paket %s treba instalirati. Da li ga želite instalirati?"

#: ../../diskdrake/interactive.pm_.c:979
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""
"Žalim međutim ne mogu napraviti /boot toliko daleko na disku\n"
"(cilindar > 1024).\n"
"Imate dvije opcije ili ćete koristiti LILO pa neće raditi ili nećete\n"
"koristiti LILO pa vam /boot neće ni trebati."

#: ../../diskdrake/interactive.pm_.c:983
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"Particiju koju ste odabrali kao root (/) je fizički locirana poslije 1024-"
"tog cilindra vašeg hard diska, a nemate /boot particiju.\n"
"Ukoliko planirate koristiti LILO boot menadžer, budite pažljivi da dodate/"
"boot particiju"

#: ../../diskdrake/interactive.pm_.c:989
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"So be careful to add a /boot partition"
msgstr ""
"Izabrali ste softwaresku RAID particiju kao root (/).\n"
"Nema bootloader-a koji je u mogućnosti to podržati bez /boot particije.\n"
"Zato budite pažljivi da dodate /boot particiju"

#: ../../diskdrake/interactive.pm_.c:1009
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Particijska tablica pogona %s će sada biti zapisana na disk!"

#: ../../diskdrake/interactive.pm_.c:1013
msgid "You'll need to reboot before the modification can take place"
msgstr "Trebate ponovo pokrenuti sustav prije nego promjene postanu aktivne"

#: ../../diskdrake/interactive.pm_.c:1024
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"Nakon formatiranja particije %s svi podaci na ovoj particiji biti će obrisani"

#: ../../diskdrake/interactive.pm_.c:1026
msgid "Formatting"
msgstr "Formatiram"

#: ../../diskdrake/interactive.pm_.c:1027
#, c-format
msgid "Formatting loopback file %s"
msgstr "Formatiram loopback datoteku %s"

#: ../../diskdrake/interactive.pm_.c:1028
#: ../../install_steps_interactive.pm_.c:459
#, c-format
msgid "Formatting partition %s"
msgstr "Formatiram particiju %s"

#: ../../diskdrake/interactive.pm_.c:1039
msgid "Hide files"
msgstr "Sakrij datoteku"

#: ../../diskdrake/interactive.pm_.c:1039
msgid "Move files to the new partition"
msgstr "Premijesti datoteku na novu particiju"

#: ../../diskdrake/interactive.pm_.c:1040
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"Direktorij %s već sadrži neke podatke\n"
"(%s)"

#: ../../diskdrake/interactive.pm_.c:1051
msgid "Moving files to the new partition"
msgstr "Premiješteam datoteke na novu particiju"

#: ../../diskdrake/interactive.pm_.c:1055
#, c-format
msgid "Copying %s"
msgstr "Kopiram %s"

#: ../../diskdrake/interactive.pm_.c:1059
#, c-format
msgid "Removing %s"
msgstr "Uklanjam %s"

#: ../../diskdrake/interactive.pm_.c:1069
#, c-format
msgid "partition %s is now known as %s"
msgstr "particija %s je sada poznata kao %s"

#: ../../diskdrake/interactive.pm_.c:1090
#: ../../diskdrake/interactive.pm_.c:1149
msgid "Device: "
msgstr "Uređaj:"

#: ../../diskdrake/interactive.pm_.c:1091
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS uređaj slovo: %s (nagađanje)\n"

#: ../../diskdrake/interactive.pm_.c:1095
#: ../../diskdrake/interactive.pm_.c:1103
#: ../../diskdrake/interactive.pm_.c:1168
msgid "Type: "
msgstr "Vrsta: "

#: ../../diskdrake/interactive.pm_.c:1099
msgid "Name: "
msgstr "Ime: "

#: ../../diskdrake/interactive.pm_.c:1107
#, c-format
msgid "Start: sector %s\n"
msgstr "Početak: sektor %s\n"

#: ../../diskdrake/interactive.pm_.c:1108
#, c-format
msgid "Size: %s"
msgstr "Veličina: %s"

#: ../../diskdrake/interactive.pm_.c:1110
#, c-format
msgid ", %s sectors"
msgstr ", %s sektora"

#: ../../diskdrake/interactive.pm_.c:1112
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Cilindar %d do %d\n"

#: ../../diskdrake/interactive.pm_.c:1113
msgid "Formatted\n"
msgstr "Formatiran\n"

#: ../../diskdrake/interactive.pm_.c:1114
msgid "Not formatted\n"
msgstr "Nije formatiran\n"

#: ../../diskdrake/interactive.pm_.c:1115
msgid "Mounted\n"
msgstr "Montiran\n"

#: ../../diskdrake/interactive.pm_.c:1116
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../diskdrake/interactive.pm_.c:1118
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"Loopback datoteka(e):\n"
"   %s\n"

#: ../../diskdrake/interactive.pm_.c:1119
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Podrazumijevana boot particija\n"
"  (za MS-DOS boot, ne za LILO)\n"

#: ../../diskdrake/interactive.pm_.c:1121
#, c-format
msgid "Level %s\n"
msgstr "Razina %s\n"

#: ../../diskdrake/interactive.pm_.c:1122
#, c-format
msgid "Chunk size %s\n"
msgstr "Chunk veličina %s\n"

#: ../../diskdrake/interactive.pm_.c:1123
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-diskovi %s\n"

#: ../../diskdrake/interactive.pm_.c:1125
#, c-format
msgid "Loopback file name: %s"
msgstr "Ime loopback datoteke: %s"

#: ../../diskdrake/interactive.pm_.c:1128
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition, you should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Šanse su, da je ova particija\n"
"ustvari particija upravljačkog programa, vjerojatno\n"
"biste ju trebali ostaviti.\n"

#: ../../diskdrake/interactive.pm_.c:1131
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Ova specijalna bootstrap\n"
"particija je za\n"
"dvostruko-podizanje (dual-boot) vašeg sustava.\n"

#: ../../diskdrake/interactive.pm_.c:1150
msgid "Read-only"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1151
#, c-format
msgid "Size: %s\n"
msgstr "Veličina: %s\n"

#: ../../diskdrake/interactive.pm_.c:1152
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"

#: ../../diskdrake/interactive.pm_.c:1153
msgid "Info: "
msgstr "Info: "

#: ../../diskdrake/interactive.pm_.c:1154
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-diskovi %s\n"

#: ../../diskdrake/interactive.pm_.c:1155
#, c-format
msgid "Partition table type: %s\n"
msgstr "Vrsta particijske tabele: %s\n"

#: ../../diskdrake/interactive.pm_.c:1156
#, fuzzy, c-format
msgid "on channel %d id %d\n"
msgstr "na sabirnici %d id %d\n"

#: ../../diskdrake/interactive.pm_.c:1186
msgid "Filesystem encryption key"
msgstr "Ključ enkriptiranja datotečnog sustava"

#: ../../diskdrake/interactive.pm_.c:1187
msgid "Choose your filesystem encryption key"
msgstr "Izaberite vaš ključ za enkriptiranje datotečnog sustava"

#: ../../diskdrake/interactive.pm_.c:1190
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Upisani enkripcijski ključ je prejednostavan (mora biti dug najmanje %d "
"znakova)"

#: ../../diskdrake/interactive.pm_.c:1191
msgid "The encryption keys do not match"
msgstr "Enkripcijski ključevi se ne slažu"

#: ../../diskdrake/interactive.pm_.c:1194
msgid "Encryption key"
msgstr "Enkripcijski ključ"

#: ../../diskdrake/interactive.pm_.c:1195
msgid "Encryption key (again)"
msgstr "Enkripcijski ključ (ponovno)"

#: ../../diskdrake/removable.pm_.c:47
msgid "Change type"
msgstr "Promijeni tip"

#: ../../diskdrake/removable_gtk.pm_.c:28
msgid "Please click on a medium"
msgstr "Molim kliknite na medij"

#: ../../diskdrake/smbnfs_gtk.pm_.c:162
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr ""

#: ../../diskdrake/smbnfs_gtk.pm_.c:166 ../../diskdrake/smbnfs_gtk.pm_.c:175
#, fuzzy
msgid "Domain Authentication Required"
msgstr "Provjera autentičnosti"

#: ../../diskdrake/smbnfs_gtk.pm_.c:167
#, fuzzy
msgid "Another one"
msgstr "Internet"

#: ../../diskdrake/smbnfs_gtk.pm_.c:167
#, fuzzy
msgid "Which username"
msgstr "Korisničko ime"

#: ../../diskdrake/smbnfs_gtk.pm_.c:176
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""

#: ../../diskdrake/smbnfs_gtk.pm_.c:178 ../../standalone/drakbackup_.c:3525
#, fuzzy
msgid "Username"
msgstr "Korisničko ime"

#: ../../diskdrake/smbnfs_gtk.pm_.c:180
#, fuzzy
msgid "Domain"
msgstr "NIS domena"

#: ../../diskdrake/smbnfs_gtk.pm_.c:200
msgid "Search servers"
msgstr "Poslužitelji za pretraživanje"

#: ../../fs.pm_.c:544 ../../fs.pm_.c:554 ../../fs.pm_.c:558 ../../fs.pm_.c:562
#: ../../fs.pm_.c:566 ../../fs.pm_.c:570
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s formatiranje %s nije uspjelo"

#: ../../fs.pm_.c:607
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "ne znam kako formatirati %s kao vrstu %s"

#: ../../fs.pm_.c:681 ../../fs.pm_.c:724
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "montiranje particije %s u direktorij %s neuspješno"

#: ../../fs.pm_.c:739 ../../partition_table.pm_.c:598
#, c-format
msgid "error unmounting %s: %s"
msgstr "greška kod demontiranja %s: %s"

#: ../../fsedit.pm_.c:21
msgid "simple"
msgstr "jednostavno"

#: ../../fsedit.pm_.c:25
msgid "with /usr"
msgstr "sa /usr"

#: ../../fsedit.pm_.c:30
msgid "server"
msgstr "poslužitelj"

#: ../../fsedit.pm_.c:240
#, fuzzy, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"Ne mogu pročitati particijsku tablicu, previše je koruptirana za mene :(\n"
"Mogu pokušati sa brisanjem loših particija (SVI PODACI će biti "
"izgubljeni!).\n"
"Drugo rješenje je onemogućiti DrakX-u da mjenja particijsku tablicu.\n"
"(greška je %s)\n"
"\n"
"Da li se slažete da izgubite sve particije?\n"

#: ../../fsedit.pm_.c:501
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "JFS se ne može koristiti na particijama koje su manje od 16 MB"

#: ../../fsedit.pm_.c:502
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "ReiserFS se ne može koristiti na particijama koje su manje od 32 MB"

#: ../../fsedit.pm_.c:521
msgid "Mount points must begin with a leading /"
msgstr "Mjesto montiranja mora početi sa /"

#: ../../fsedit.pm_.c:522
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Već postoji particija sa mjestom montiranja %s\n"

#: ../../fsedit.pm_.c:526
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "Ne možete koristiti LVM logički prostor za mjesto montiranja %s"

#: ../../fsedit.pm_.c:528
msgid "This directory should remain within the root filesystem"
msgstr "Ovaj direktorij bi trebao ostati unutar root datotečnog sustava"

#: ../../fsedit.pm_.c:530
#, fuzzy
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Treba vam istinski datotečni sustav (ex2, reiserfs) za ovo mjesto "
"montiranja\n"

#: ../../fsedit.pm_.c:532
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr ""
"Ne možete koristiti enkriptirani datotečni sustav za točku montiranja %s"

#: ../../fsedit.pm_.c:599
msgid "Not enough free space for auto-allocating"
msgstr "Nema dovoljno slobodnog prostora za auto-alokaciju"

#: ../../fsedit.pm_.c:601
msgid "Nothing to do"
msgstr "Nema ništa za uraditi"

#: ../../fsedit.pm_.c:694
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Greška prilikom otvaranja %s za pisanje: %s"

#: ../../harddrake/sound.pm_.c:155
msgid "No alternative driver"
msgstr ""

#: ../../harddrake/sound.pm_.c:156
#, c-format
msgid "There's no known OSS/ALSA alternative driver for your sound card (%s)"
msgstr ""

#: ../../harddrake/sound.pm_.c:158
#, fuzzy
msgid "Sound configuration"
msgstr "CUPS postavke"

#: ../../harddrake/sound.pm_.c:159
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)"
msgstr ""

#: ../../harddrake/sound.pm_.c:162
#, fuzzy
msgid "Driver:"
msgstr "Upravljački program"

#: ../../harddrake/sound.pm_.c:173
#, fuzzy
msgid "No known driver"
msgstr "X upravljački program"

#: ../../harddrake/sound.pm_.c:174
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr ""

#: ../../harddrake/sound.pm_.c:177
#, fuzzy
msgid "Unkown driver"
msgstr "Nepoznati model"

#: ../../harddrake/sound.pm_.c:178
#, c-format
msgid ""
"The \"%s\" driver for your sound card is unlisted\n"
"\n"
"Please send the output of the \"lspcidrake -v\" command to\n"
"<install at mandrakesoft dot com>\n"
"with subject: unlisted sound driver \"%s\""
msgstr ""

#: ../../harddrake/ui.pm_.c:16
#, fuzzy
msgid "Model"
msgstr "Miš"

#: ../../harddrake/ui.pm_.c:16
#, fuzzy
msgid "hard disk model"
msgstr "Memorija kartice (DMA)"

#: ../../harddrake/ui.pm_.c:17
#, fuzzy
msgid "Channel"
msgstr "Odustani"

#: ../../harddrake/ui.pm_.c:17
msgid "EIDE/SCSI channel"
msgstr ""

#: ../../harddrake/ui.pm_.c:19
msgid "Bus"
msgstr ""

#: ../../harddrake/ui.pm_.c:20
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""

#: ../../harddrake/ui.pm_.c:21
#, fuzzy
msgid "Module"
msgstr "Miš"

#: ../../harddrake/ui.pm_.c:21
msgid "the module of the GNU/Linux kernel that handle that device"
msgstr ""

#: ../../harddrake/ui.pm_.c:22
msgid "Media class"
msgstr ""

#: ../../harddrake/ui.pm_.c:22
msgid "class of hardware device"
msgstr ""

#: ../../harddrake/ui.pm_.c:23 ../../printerdrake.pm_.c:1517
msgid "Description"
msgstr "Opis"

#: ../../harddrake/ui.pm_.c:23
msgid "this field describe the device"
msgstr ""

#: ../../harddrake/ui.pm_.c:25
#, fuzzy
msgid "Bus identification"
msgstr "Provjera autentičnosti"

#: ../../harddrake/ui.pm_.c:26
msgid ""
"- PCI and USB devices: this list the vendor, device, subvendor and subdevice "
"PCI/USB ids"
msgstr ""

#: ../../harddrake/ui.pm_.c:28
msgid "Location on the bus"
msgstr ""

#: ../../harddrake/ui.pm_.c:29
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""

#: ../../harddrake/ui.pm_.c:32
#, fuzzy
msgid "Old device file"
msgstr "Odaberite datoteku"

#: ../../harddrake/ui.pm_.c:33
msgid "old static device name used in dev package"
msgstr ""

#: ../../harddrake/ui.pm_.c:34
#, fuzzy
msgid "New devfs device"
msgstr "Gateway uređaj"

#: ../../harddrake/ui.pm_.c:35
msgid "new dinamic device name generated by incore kernel devfs"
msgstr ""

#: ../../harddrake/ui.pm_.c:36
#, fuzzy
msgid "Number of buttons"
msgstr "2 gumba"

#: ../../harddrake/ui.pm_.c:37
msgid "the vendor name of the device"
msgstr ""

#: ../../harddrake/ui.pm_.c:38
#, fuzzy
msgid "Alternative drivers"
msgstr "Alternativna testna stranica (A4)"

#: ../../harddrake/ui.pm_.c:39
msgid "the list of alternative drivers for this sound card"
msgstr ""

#: ../../harddrake/ui.pm_.c:63
#, fuzzy
msgid "/_Quit"
msgstr "Završi"

#: ../../harddrake/ui.pm_.c:64 ../../harddrake/ui.pm_.c:65
#: ../../harddrake/ui.pm_.c:71 ../../standalone/logdrake_.c:110
msgid "/_Help"
msgstr "/_Pomoć"

#: ../../harddrake/ui.pm_.c:65
#, fuzzy
msgid "/_Help..."
msgstr "/_Pomoć"

#: ../../harddrake/ui.pm_.c:66
msgid "Harddrake help"
msgstr ""

#: ../../harddrake/ui.pm_.c:67
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""

#: ../../harddrake/ui.pm_.c:71
#, fuzzy
msgid "/_About..."
msgstr "/Pomoć/_O programu"

#: ../../harddrake/ui.pm_.c:72
msgid "About Harddrake"
msgstr ""

#: ../../harddrake/ui.pm_.c:73
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
"Version:"
msgstr ""

#: ../../harddrake/ui.pm_.c:74
#, fuzzy
msgid "Author:"
msgstr "Auto. ispitaj"

#: ../../harddrake/ui.pm_.c:84
#, fuzzy
msgid "Harddrake2 version "
msgstr "Otkrivanje hard diskova"

#: ../../harddrake/ui.pm_.c:99
#, fuzzy
msgid "Detected hardware"
msgstr "Pokaži info o hardveru"

#: ../../harddrake/ui.pm_.c:101
#, fuzzy
msgid "Information"
msgstr "Prikaži informacije"

#: ../../harddrake/ui.pm_.c:104
#, fuzzy
msgid "Configure module"
msgstr "Podesi miš"

#: ../../harddrake/ui.pm_.c:105
msgid "Run config tool"
msgstr ""

#: ../../harddrake/ui.pm_.c:109
#, fuzzy
msgid "Detection in progress"
msgstr "detektiran na portu %s"

#: ../../harddrake/ui.pm_.c:109 ../../interactive.pm_.c:391
msgid "Please wait"
msgstr "Molim pričekajte"

#: ../../harddrake/ui.pm_.c:143
msgid "You can configure each parameter of the module here."
msgstr ""

#: ../../harddrake/ui.pm_.c:161
#, fuzzy, c-format
msgid "Running \"%s\" ..."
msgstr "Uklanjam pisač \"%s\" ..."

#: ../../harddrake/ui.pm_.c:176
msgid "Probing $Ident class\n"
msgstr ""

#: ../../harddrake/ui.pm_.c:198
msgid "primary"
msgstr ""

#: ../../harddrake/ui.pm_.c:198
#, fuzzy
msgid "secondary"
msgstr "%d sekundi"

#: ../../harddrake/v4l.pm_.c:15 ../../harddrake/v4l.pm_.c:65
#, fuzzy
msgid "Auto-detect"
msgstr "Koristi auto detekciju"

#: ../../harddrake/v4l.pm_.c:66 ../../harddrake/v4l.pm_.c:186
#, fuzzy
msgid "Unknown|Generic"
msgstr "Generički"

#: ../../harddrake/v4l.pm_.c:98
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""

#: ../../harddrake/v4l.pm_.c:99
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""

#: ../../harddrake/v4l.pm_.c:210
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed"
msgstr ""

#: ../../harddrake/v4l.pm_.c:213
#, fuzzy
msgid "Card model:"
msgstr "Memorija kartice (DMA)"

#: ../../harddrake/v4l.pm_.c:214
#, fuzzy
msgid "Tuner type:"
msgstr "Promijeni tip"

#: ../../harddrake/v4l.pm_.c:215
msgid "Number of capture buffers:"
msgstr ""

#: ../../harddrake/v4l.pm_.c:215
msgid "number of capture buffers for mmap'ed capture"
msgstr ""

#: ../../harddrake/v4l.pm_.c:217
#, fuzzy
msgid "PLL setting:"
msgstr "Postavka opterećenja"

#: ../../harddrake/v4l.pm_.c:218
msgid "Radio support:"
msgstr ""

#: ../../harddrake/v4l.pm_.c:218
msgid "enable radio support"
msgstr ""

#: ../../help.pm_.c:13
msgid ""
"GNU/Linux is a multiuser system, and this means that each user can have his\n"
"own preferences, his own files and so on. You can read the ``User Guide''\n"
"to learn more. But unlike \"root\", which is the administrator, the users\n"
"you add here will not be entitled to change anything except their own files\n"
"and their own configuration. You will have to create at least one regular\n"
"user for yourself. That account is where you should log in for routine use.\n"
"Although it is very practical to log in as \"root\" everyday, it may also\n"
"be very dangerous! The slightest mistake could mean that your system would\n"
"not work any more. If you make a serious mistake as a regular user, you may\n"
"only lose some information, but not the entire system.\n"
"\n"
"First, you have to enter your real name. This is not mandatory, of course -\n"
"as you can actually enter whatever you want. DrakX will then take the first\n"
"word you have entered in the box and will bring it over to the \"User\n"
"name\". This is the name this particular user will use to log onto the\n"
"system. You can change it. You then have to enter a password here. A\n"
"non-privileged (regular) user's password is not as crucial as the \"root\"'\n"
"one from a security point of view, but that is no reason to neglect it:\n"
"after all, your files are at risk.\n"
"\n"
"If you click on \"Accept user\", you can then add as many as you want. Add\n"
"a user for each one of your friends: your father or your sister, for\n"
"example. When you finish adding all the users you want, select \"Done\".\n"
"\n"
"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
"for that user (bash by default)."
msgstr ""
"GNU/Linux je višekorisnički sustav, i to znači da svaki korisnik može imati\n"
"vlastita podešenja, vlastite datoteke itd. Možete pročitati ``User Guide''\n"
"da naučite više. Za razliku od \"root\"-a, koji je administrator, korisnici\n"
"koje ćete dodati ovdje neće imati ovlaštenja za mijenjanje ničega osim "
"vlastitih\n"
"datoteka ili vlastitih postavki. Morati ćete napraviti najmanje jednog "
"normalnog\n"
"korisnika za vas. Taj račun ćete koristiti za prijavljivanje za rutinsko\n"
"korištenje. Iako je vrlo praktično se prijaviti kao \"root\" svaki dan,\n"
"to može biti vrlo opasno! Najmanja pogreška može značiti da vaš sustav\n"
"neće više moći raditi. Ako napravite ozbiljnu grešku kao normalan korisnik,\n"
"možete izgubiti samo neke informacije, ali ne cijeli sustav.\n"
"\n"
"Prvo, morate unijeti vaše pravo ime. Ono nije obvezno, naravno\n"
"možete ustvari unijeti što god želite. DrakX će tada uzeti prvu riječ koju\n"
"ste unijeli u to polje i prenijeti je u \"Korisničko ime\". To je ime kojim "
"će \n"
"se taj konkretni korisnik prijavljivati u sustav. Možete ga mijenjati. "
"Tada \n"
"morate ovdje upisati lozinku. Sa gledišta sigurnosti, lozinka "
"neprivilegiranog \n"
"(običnog) korisnika nije toliko važna kao \"root\" lozinka, ali je ne treba "
"zbog\n"
"toga zanemarivati: naposlijetku, radi se o vašim datotekama.\n"
"\n"
"Ako pritisnete \"Prihvati korisnika\", možete ih dodati koliko želite. "
"Dodajte\n"
"korisnika za svakog prijatelja: oca ili sestru, npr. Kada ste dodali sve "
"korisnike\n"
"koje ste željeli, stisnite \"Završi\".\n"
"\n"
"Pritiskanjem na \"Napredno\" možete promijeniti predodređenu \"ljusku\" za "
"tog\n"
"korisnika (bash je predodređen)."

#: ../../help.pm_.c:41
msgid ""
"Listed above are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, they are good for most common\n"
"installations. If you make any changes, you must at least define a root\n"
"partition (\"/\"). Do not choose too small a partition or you will not be\n"
"able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a partition for \"/home\"\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"Gore su popisane postojeće Linux particije pronađene na\n"
"vašem hard disku. Možete zadržati izbore napravljene od strane čarobnjaka, "
"one su dobre za\n"
"uobičajenu upotrebu. Ukoliko promjenite izbore, morate barem definirati "
"root\n"
"particiju (\"/\"). Nemojte izabrati premalu particiju jer nećete moći \n"
"instalirati dovoljno software-a. Ako želite spremati vaše podatke na "
"posebnoj particiji,\n"
"trebate također izabrati \"/home\" (jedino moguće ako imate više od jedne\n"
"raspoložive Linux particije).\n"
"\n"
"\n"
"Za informaciju, svaka particija je popisana kako slijedi: \"Ime\", "
"\"Kapacitet\".\n"
"\n"
"\n"
"\"Ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska\",\n"
"\"broj particije\" (naprimjer, \"hda1\").\n"
"\n"
"\n"
"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
"ukoliko je on SCSI hard disk.\n"
"\n"
"\n"
"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard "
"diskovima:\n"
"\n"
" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\";\n"
"\n"
" * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\";\n"
"\n"
" * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\";\n"
"\n"
" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\".\n"
"\n"
"\n"
"Sa SCSI hard diskovima, \"a\" znači \"primarni hard disk\", \"b\" znači "
"\"sekundarni hard disk\", itd..."

#: ../../help.pm_.c:72
msgid ""
"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
"knows if a selected package is located on another CD-ROM and will eject the\n"
"current CD and ask you to insert a different one as required."
msgstr ""
"Mandrake Linux instalacija je proširena na nekoliko CDROMova. DrakX\n"
"zna ukoliko se odabrani paket nalazi na drugom CDROMu i izbaciti će\n"
"trenutni CD i pitati vas da ubacite drugi koji je potreban."

#: ../../help.pm_.c:77
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"you are not supposed to know them all by heart.\n"
"\n"
"If you are performing a standard installation from a CD-ROM, you will first\n"
"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
"the CD labels and highlight the boxes corresponding to the CDs you have\n"
"available for installation. Click \"OK\" when you are ready to continue.\n"
"\n"
"Packages are sorted in groups corresponding to a particular use of your\n"
"machine. The groups themselves are sorted into four sections:\n"
"\n"
" * \"Workstation\": if you plan to use your machine as a workstation,\n"
"select one or more of the corresponding groups;\n"
"\n"
" * \"Development\": if your machine is to be used for programming, choose\n"
"the desired group(s);\n"
"\n"
" * \"Server\": if your machine is intended to be a server, you will be able\n"
"to select which of the most common services you wish to install on your\n"
"machine;\n"
"\n"
" * \"Graphical Environment\": finally, this is where you will choose your\n"
"preferred graphical environment. At least one must be selected if you want\n"
"to have a graphical workstation!\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"With X\": install the fewer packages possible to have a working\n"
"graphical desktop;\n"
"\n"
" * \"With basic documentation\": installs the base system plus basic\n"
"utilities and their documentation. This installation is suitable for\n"
"setting up a server;\n"
"\n"
" * \"Truly minimal install\": will install the strict minimum necessary to\n"
"get a working Linux system, in command line only. This installation is\n"
"about 65Mb large.\n"
"\n"
"You can check the \"Individual package selection\" box, which is useful if\n"
"you are familiar with the packages being offered or if you want to have\n"
"total control over what will be installed.\n"
"\n"
"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
"groups to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""
"Sada treba odrediti koje programe želite instalirati u svoj sustav. Za "
"Mandrake \n"
"Linux su dostupne tisuće paketa, i ne morate ih sve znati na pamet.\n"
"\n"
"Ako pokrećete standarnu instalaciju sa CD-ROMa, prvo ćete biti upitani da "
"navedete\n"
"CDove koje imate (samo u modu za stručnjake). Provjerite imena CDova i "
"označite\n"
"kućice koje odgovaraju CDovima koje imate. Pritisnite \"U redu\" kada ste "
"spremni\n"
"nastaviti.\n"
"\n"
"Paketi su podijeljeni po grupama koje odgovaraju određenoj svrsi. Grupe su \n"
"podijeljene u četiri sekcije:\n"
"\n"
" * \"Radna stanica\": ako ćete koristiti stroj kao radnu stanicu, izaberite\n"
"jednu ili više odgovarajućih grupa;\n"
"\n"
" * \"Razvoj\": ako će se Vaš stroj koristiti za programiranje, izaberite\n"
"željene grupe;\n"
"\n"
" * \"Poslužitelj\": ako je Vaš stroj određen za poslužitelja, moći ćete "
"odabrati\n"
"koje od uobičajenih servisa želite instalirati na njega;\n"
"\n"
" * \"Grafičko okružje\": naposlijetku, ovdje birate grafičko okružje. Barem "
"jedno\n"
"mora biti odabrano ako želite imati grafičku radnu stanicu!\n"
"\n"
"Pomicanjem pokazivača miša na ime grupe će se prikazati kratak opis te "
"grupe. Ako\n"
"nijedna grupa nije odabrana pri normalnoj instalaciji (za razliku od "
"nadogradnje),\n"
"iskočit će dijalog sa predloženim opcijama za minimalnu instalaciju:\n"
"\n"
" * \"Sa Xima\": instaliranje što je manje paketa moguće za grafičko "
"sučelje;\n"
"\n"
" * \"Sa osnovnom dokumentacijom\": instalira osnovni sustav sa osnovnim "
"pomoćnim\n"
"programima i njihovom dokumentacijom. Ova instalacija je pogodna za "
"namještanje\n"
"poslužitelja;\n"
"\n"
" * \"Stvarno malena instalacija\": instalirat će strogi minimum potreban da "
"bi\n"
"imali Linux sustav koji radi, samo u komandnoj liniji. Ova instalacija je "
"velika\n"
"oko 65Mb.\n"
"\n"
"Možete provjeriti \"Inividualni odabir paketa\", što je korisno ako ste "
"upoznati\n"
"sa ponuđenim paketima ili ako želite imati potpunu kontrolu nad "
"instaliranim\n"
"sadržajem.\n"
"\n"
"Ako ste pokrenuli instalaciju u \"Nadogradnja\" načinu, možete odselektirati "
"sve\n"
"grupe da izbjegnete instaliranje novih paketa. Ovo je korisno za "
"popravljanje\n"
"ili osuvremenjivanje postojećeg sustava."

#: ../../help.pm_.c:128
msgid ""
"Finally, depending on whether or not you chose to be able to select\n"
"individual packages, you will be presented a tree containing all packages\n"
"classified by groups and subgroups. While browsing the tree, you can select\n"
"entire groups, subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right. When your selection is finished, click the \"Install\" button which\n"
"will then launch the installation process. Depending on the speed of your\n"
"hardware and the number of packages that need to be installed, it may take\n"
"a while to complete the process. An estimate of the time it will take to\n"
"install everything is displayed on the screen, to help you gauge if there\n"
"is sufficient time to enjoy a cup of coffee.\n"
"\n"
"!! If a server package has been selected, either intentionally or because\n"
"it was part of a whole group, you will be asked to confirm that you really\n"
"want those servers to be installed. Under Mandrake Linux, any installed\n"
"servers are started by default at boot time. Even if they are safe and have\n"
"no known issues at the time the distribution was shipped, it may happen\n"
"that security holes are discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
"install the listed services and they will be started automatically by\n"
"default. !!\n"
"\n"
"The \"Automatic dependencies\" option simply disables the warning dialog\n"
"which appears whenever the installer automatically selects a package. This\n"
"occurs because it has determined that it needs to satisfy a dependency with\n"
"another package in order to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows to load the\n"
"package list chosen during a previous installation. Clicking on this icon\n"
"will ask you to insert a floppy disk previously created at the end of\n"
"another installation. See the second tip of last step on how to create such\n"
"a floppy."
msgstr ""
"Konačno, ovisno o tome da li ste izbrali individualne pakete, prikazat će "
"vam \n"
"se stablo sa svim paketima podijeljenim u grupe i podgrupe. Pri "
"pregledavanju\n"
"stabla možete izabrati čitave grupe, podgrupe ili pojedine pakete.\n"
"\n"
"Kad god izaberet paket na stablu, na desnoj strani se pojavi opisnik. Kada "
"ste\n"
"završili odabir, pritisnite \"Instaliraj\", čime ćete pokrenuti proces "
"instaliranja.\n"
"Ovisno o brzini računala i broju paketa koji trebaju biti instalirani, "
"proces može\n"
"potrajati. Procjena vremena koje će biti potrebno da bi se sve instaliralo "
"piše\n"
"na ekranu, da vam pomogne procjeniti imate li vremena za šalicu kave.\n"
"\n"
"!! Ako je odabran poslužiteljski paket, namjerno ili jer je pripadao nekoj "
"grupi,\n"
"bit ćete upitani da potvrdite da li želite stvarno instalirati te "
"poslužitelje.\n"
"Kod Mandrake Linuxa, svi instalirani poslužitelji se pokreću prilikom "
"podizanja\n"
"sustava. Čak iako su sigurni, bez poznatih problema u vrijeme izlaska "
"distribucije,\n"
"može se dogoditi da se otkriju sigurnosne rupe nakon zgotovljenja ove "
"inačice\n"
"Mandrake Linuxa. Ako ne znate što bi pojedini servis trebao raditi ili "
"zašto \n"
"se instalira, pritisnite \"Ne\". Pritiskanjem na \"Da\"instalirat će se "
"navedeni\n"
"servisi i pokretat će se automatski. !!\n"
"\n"
"\"Automatske ovisnosti\" opcija onemogućuje upozorenje koje se pojavi kad "
"god \n"
"instalacija automatski izabere paket. Ovo se dešava stoga što je utvrdila "
"da\n"
"treba zadovoljiti ovisnost drugim paketom da bi se uspješno završila.\n"
"\n"
"Malena ikona diskete na dnu popisa omogućuje učitavanje popisa paketa "
"izabranih\n"
"tijekom neke prošle instalacije. Pritiskom na nj upitat će vas da ubacite "
"disketu\n"
"napravljenu na kraju neke druge instalacije. Pogledajte drugi savjet u "
"posljednjem\n"
"koraku stvaranja takve diskete."

#: ../../help.pm_.c:164
msgid ""
"You are now able to set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"OK\".\n"
"The autodetection of network devices and modem will be launched. If this\n"
"detection fails, uncheck the \"Use auto detection\" box next time. You may\n"
"also choose not to configure the network, or do it later; in that case,\n"
"simply click the \"Cancel\" button.\n"
"\n"
"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
"cable modem, and finally a simple LAN connection (Ethernet).\n"
"\n"
"Here, we will not detail each configuration. Simply make sure that you have\n"
"all the parameters from your Internet Service Provider or system\n"
"administrator.\n"
"\n"
"You can consult the ``User Guide'' chapter about Internet connections for\n"
"details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection.\n"
"\n"
"If you wish to configure the network later after installation, or if you\n"
"are finished configuring your network connection, click \"Cancel\"."
msgstr ""
"Predloženo Vam je da namjestite Internet/mrežnu vezu. Ako želite računalo\n"
"povezati s Internetom ili lokalnom mrežom, pristisnite \"U redu\". Pokrenut "
"će\n"
"se proces automatskog prepoznavanja mrežnih kartica i modema. Ako ovaj "
"proces\n"
"zakaže, isključite \"Koristi autodetekciju\" kućicu slijedeći put. Možete\n"
"odabrati i da ne namještate mrežu, ili da to učinite kasnije; u tom "
"slučaju, \n"
"samo stisnite \"Odustani\".\n"
"\n"
"Dostupne veze su: obični modem, ISDN modem, ADSL veza, kablovski modem, te\n"
"jednostavna LAN veza (Ethernet).\n"
"\n"
"Ovdje se nećemo detaljno baviti sa pojedinim konfiguracijama. Samo "
"provjerite da\n"
"li imate sve parametre od vašeg pružatelja internet usluga ili sustavskog \n"
"administratora.\n"
"\n"
"Možete pogledati u ``User Guide'', poglavlje o Internet vezama za detalje "
"o \n"
"postavkama, ili jednostavno sačekati da se sustav instalira, pa koristiti\n"
"tamo opisani program da bi namjestili vašu vezu.\n"
"\n"
"Ako želite namjestiti mrežu kasnije, poslije instalacije, ili ste završili\n"
"namještanje mreže, stisnite \"Odustani\"."

#: ../../help.pm_.c:186
msgid ""
"You may now choose which services you wish to start at boot time.\n"
"\n"
"Here are presented all the services available with the current\n"
"installation. Review them carefully and uncheck those which are not always\n"
"needed at boot time.\n"
"\n"
"You can get a short explanatory text about a service by selecting a\n"
"specific service. However, if you are not sure whether a service is useful\n"
"or not, it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services which you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""
"Sada možete izabrati servise koje želite pokreniti pri podizanju.\n"
"\n"
"Ovdje su predstavljeni svi servisi dostupni sa trenutnom instalacijom.\n"
"Pregledajet ih pažljivo i maknite one koje nisu uvijek potrebni prilikom\n"
"podizanja sustava.\n"
"\n"
"Odabiranjem određenog servisa dobit ćete kratki opis tog servisa. Međutim, "
"ako\n"
"niste sigurni je li servis koristan ili ne, sigurnije je ostaviti "
"predodređeno\n"
"ponašanje.\n"
"\n"
"!! Na ovoj razini obratite pozornost na to da li ćete koristiti stroj kao\n"
"poslužitelj: vjerojatno ne želite pokretati neke servise koje ne trebate.\n"
"Prisjetite se da neki servisi mogu biti opasni ako su pokrenuti na "
"poslužitelju.\n"
"Općenito, izaberite samo one servise koji vam stvarno trebaju.\n"
"!!"

#: ../../help.pm_.c:203
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
"local time according to the time zone you selected. It is however possible\n"
"to deactivate this by unselecting \"Hardware clock set to GMT\" so that the\n"
"hardware clock is the same as the system clock. This is useful when the\n"
"machine is hosting another operating system like Windows.\n"
"\n"
"The \"Automatic time synchronization\" option will automatically regulate\n"
"the clock by connecting to a remote time server on the Internet. In the\n"
"list that is presented, choose a server located near you. Of course you\n"
"must have a working Internet connection for this feature to work. It will\n"
"actually install on your machine a time server which can be optionally used\n"
"by other machines on your local network."
msgstr ""
"GNU/Linux upravlja vremenom po GMTu (Greenwich Mean Time) i prevodi ga u\n"
"lokalno vrijeme prema vremenskoj zoni koju ste izabrali. Moguće je, doduše,\n"
"ovo isključiti isključivanjem odabira \"Hardverski sat namješten na GMT\" "
"tako\n"
"da je hardverski sat jednak sustavskom. Ovo je korisno kada se na računalu\n"
"nalazi drugi operacijski sustav, poput Windows.\n"
"\n"
"Opcija \"Automatska sinhronizacija vremena\" će automatski podešavati sat\n"
"tako da će se povezivati sa vremenskim poslužiteljem na Internetu. Sa "
"popisa\n"
"izaberite poslužitelj najbliže vama. Naravno, morate imati ispravnu vezu sa\n"
"Internetom da bi ovo radilo. Također, instalirat će vremenski poslužitelj "
"na\n"
"vaše računalo kojeg, opcionalno, mogu koristiti druga računala u vašoj\n"
"lokalnoj mreži."

#: ../../help.pm_.c:217
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
"will try to configure X automatically.\n"
"\n"
"It is extremely rare for it to fail, unless the hardware is very old (or\n"
"very new). If it succeeds, it will start X automatically with the best\n"
"resolution possible, depending on the size of the monitor. A window will\n"
"then appear and ask you if you can see it.\n"
"\n"
"If you are doing an \"Expert\" installation, you will enter the X\n"
"configuration wizard. See the corresponding section of the manual for more\n"
"information about this wizard.\n"
"\n"
"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
"will proceed to the next step. If you cannot see the message, it simply\n"
"means that the configuration was wrong and the test will automatically end\n"
"after 10 seconds, restoring the screen. Refer then to the Video\n"
"configuration section of the user guide for more information on how to\n"
"configure your display."
msgstr ""
"X (od X Window System) jest srce GNU/Linux grafičkog sučelja, na kojem "
"počivaju\n"
"sva grafička okružja (KDE, GNOME, AfterStep, WindowMaker, itd.) koja dolaze "
"sa\n"
"Mandrake Linuxom. Ovdje će DrakX pokušati automatski podesiti Xe.\n"
"Jako je rijetko da će zakazati, osim ako hardver nije vrlo star (ili nov)\n"
"Ako uspije, pokrenut će Xe automatski sa najboljom mogućom rezolucijom, "
"ovisno\n"
"o veličini monitora. Pojavit će se prozor s upitom da li ga vidite.\n"
"\n"
"Ako ste pokrenuli \"Stručnjak\" instalaciju, ući ćete u čarobnjak za "
"namještanje\n"
"Xa. Pogledajte odgovarajući odjeljak u priručniku za više informacija o "
"ovom\n"
"čarobnjaku.\n"
"\n"
"Ako vidite poruku tijekom testa, i odgovorite \"Da\", onda će DrakX krenuti\n"
"na slijedeći korak. Ako ne možete vidjeti poruku, to jednostavno znači da "
"je\n"
"konfiguracija pogrešna i test će se automatski završiti nakon 10 sekundi, "
"te\n"
"povratiti ekran."

#: ../../help.pm_.c:239
msgid ""
"Finally, you will be asked whether you want to see the graphical interface\n"
"at boot. Note this question will be asked even if you chose not to test the\n"
"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
"act as a server, or if you were not successful in getting the display\n"
"configured."
msgstr ""
"Konačno ćete biti pitani da li želite vidjeti grafičko sučelje pri\n"
"dizanju. Primjetite da ovo pitanje će biti pitano iako ne želite "
"istestirati\n"
"konfiguraciju. Vjerojatno, želite odgovoriti sa \"Ne\" ukoliko će vaše "
"računalo\n"
"raditi kao poslužitelj, ili ako niste bili uspješni u konfiguriranju vašeg\n"
"zaslona."

#: ../../help.pm_.c:246
#, fuzzy
msgid ""
"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
"should come back to this step for help in at least two situations:\n"
"\n"
" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
"of your main disk (unless you are using another boot manager), to allow you\n"
"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
"your system). If you need to reinstall Windows, the Microsoft install\n"
"process will rewrite the boot sector, and then you will not be able to\n"
"start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start up GNU/Linux from the hard\n"
"disk, this floppy disk will be the only means of starting up GNU/Linux. It\n"
"contains a fair number of system tools for restoring a system, which has\n"
"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
"password, or any other reason.\n"
"\n"
"If you say \"Yes\", you will be asked to enter a disk inside the drive. The\n"
"floppy disk you will insert must be empty or contain data which you do not\n"
"need. You will not have to format it since DrakX will rewrite the whole\n"
"disk."
msgstr ""
"Mandrake Linux CD-ROM ima ugrađeni mod za spašavanje. Možete mu pristupiti\n"
"pokretanjem sustava sa CD-ROMa, pritiskanjem >>F1<< tipke pri podizanju "
"sustava\n"
"i upisivanjem >>rescue<< u komandnoj liniji. Ali ako se sustav ne može "
"podići\n"
"sa CD-ROMa, trebali biste se vratiti ovom koraku za pomoć u barem dvije "
"situacije:\n"
"\n"
" * kada instalira bootloader, DrakX će prepisati boot sektor (MBR) vašeg\n"
"primarnog diska (osim ako već ne koristite neki drugi boot manager), da bi "
"vam\n"
"omogućio pokretanje ili Windowsa ili GNU/Linuxa (ako imate Windowse u "
"računalu).\n"
"Ako trebate ponovno instalirati Windowse, Microsoftov proces instalacije će\n"
"prepisati boot sektor, i nećete moći pokrenuti GNU/Linux!\n"
"\n"
" * ako se pojavi problem i ne možete pokrenuti GNU/Linux sa tvrdog diska,\n"
"ova disketa će biti jedini način na koji možete pokrenuti GNU/Linux. Sadrži\n"
"dovoljan broj sustavskih alata za povrat sustava koji se srušio zbog "
"nedostatka\n"
"energije, nesretne greške pri tipkanju, pogreške pri upisivanju lozinke ili "
"bilo\n"
"kojeg drugog razloga.\n"
"\n"
"Kada kliknete na ovaj korak, pojavit će se zahtjev za ubacivanjem diskete u "
"pogon.\n"
"Disketa koju ubacujete mora biti prazna ili sadržavati podatke koji vam "
"nisu\n"
"potrebni. Nećete je morati formatirati, jer će je DrakX potpuno prepisati."

#: ../../help.pm_.c:270
msgid ""
"At this point, you need to choose where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
"if an existing operating system is using all the available space, you will\n"
"need to partition it. Basically, partitioning a hard drive consists of\n"
"logically dividing it to create space to install your new Mandrake Linux\n"
"system.\n"
"\n"
"Because the partitioning process' effects are usually irreversible,\n"
"partitioning can be intimidating and stressful if you are an inexperienced\n"
"user. Fortunately, there is a wizard which simplifies this process. Before\n"
"beginning, please consult the manual and take your time.\n"
"\n"
"If you are running the installation in Expert mode, you will enter\n"
"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
"From the installation interface, you can use the wizards as described here\n"
"by clicking the dialog's \"Wizard\" button.\n"
"\n"
"If partitions have already been defined, either from a previous\n"
"installation or from another partitioning tool, simply select those to\n"
"install your Linux system.\n"
"\n"
"If partitions are not defined, you will need to create them using the\n"
"wizard. Depending on your hard drive configuration, several options are\n"
"available:\n"
"\n"
" * \"Use free space\": this option will simply lead to an automatic\n"
"partitioning of your blank drive(s). You will not be prompted further;\n"
"\n"
" * \"Use existing partition\": the wizard has detected one or more existing\n"
"Linux partitions on your hard drive. If you want to use them, choose this\n"
"option. You will then be asked to choose the mount points associated to\n"
"each of the partitions. The legacy mount points are selected by default,\n"
"and you should generally keep them.\n"
"\n"
" * \"Use the free space on the Windows; partition\": if Microsoft Windows\n"
"is installed on your hard drive and takes all the space available on it,\n"
"you have to create free space for Linux data. To do so, you can delete your\n"
"Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n"
"mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n"
"be performed without the loss of any data, provided you previously\n"
"defragment the Windows partition. Backing up your data won't hurt either..\n"
"This solution is recommended if you want to use both Mandrake Linux and\n"
"Microsoft Windows on the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than at the present time. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software;\n"
"\n"
" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
"present on your hard drive and replace them with your new Mandrake Linux\n"
"system, choose this option. Be careful with this solution because you will\n"
"not be able to revert your choice after you confirm;\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Remove Windows\": this will simply erase everything on the drive and\n"
"begin fresh, partitioning everything from scratch. All data on your disk\n"
"will be lost;\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Expert mode\": choose this option if you want to manually partition\n"
"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
"can very easily lose all your data. Hence, do not choose this unless you\n"
"know what you are doing. To know how do use the DiskDrake utility used\n"
"here, refer to the section ``Managing Your Partitions'' of the ````User\n"
"Guide''''"
msgstr ""
"U ovom trenutku, trebate izabrati gdje ćete instalirati vaš\n"
"Mandrake Linux operativni sustav na vašem tvrdom disku. Ukoliko je prazan "
"ili \n"
"ako postojeći operativni sustav koristi čitav prostor na disku, trebate ga\n"
"particionirati. Jednostavno, particioniranje hard diska sastoji se od\n"
"logičkog dijeljenja kako bi napravili prostor za instalaciju vašeg novog\n"
"Mandrake Linux sustava.\n"
"\n"
"Zato što su posljedice procesa particioniranja obično nepovratne,\n"
"particioniranje može biti strašno i stresno ukoliko ste korisnik bez "
"iskustva.\n"
"Ovaj čarobnjak pojednostavljuje proces. Prije početka, molimo konzultirajte\n"
"upute i uzmite vremena koliko vam je potrebno.\n"
"\n"
"Ako ste pokrenuli instalaciju u modu za stručnjake, ući ćete u DiskDrake,\n"
"Mandrake Linuxov alat za particioniranje, s kojim možete fino podešavati\n"
"particije. Pogledajte DiskDrake odjeljak u ``User Guide''.\n"
"Iz sučelja instalacije možete koristiti čarobnjake koji su ovdje opisani\n"
"pritiskom na \"Čarobnjak\" dugme.\n"
"\n"
"Ako su particije već određene, od prijašnje instalacije, ili nekog drugog\n"
"alata za particioniranje, samo ih izaberite da bi instalirali vaš Linux "
"sustav.\n"
"\n"
"Ako particije nisu definirane, morate ih stvoriti korištenjem čarobnjaka.\n"
"Ovisno o vašem tvrdom disku, nekoliko opcija je dostupno:\n"
"\n"
" * \"Koristi slobodni prostor\": ova opcija će jednostavno automatski\n"
"particionirati vaše prazne diskove. Nećete biti više ništa priupitani;\n"
"\n"
" * \"Korištenje postojeće particije\": čarobnjak je detektirao jednu ili "
"više\n"
"postojećih Linux particija na vašem hard disku. Ukoliko\n"
"ih želite zadržati, izaberite ovu opciju.\n"
"\n"
" * \"Obriši cijeli disk\": ukoliko želite obrisati sve podatke i sve "
"particije\n"
"koje postoje na vašem hard disku i zamjeniti ih sa\n"
"vašim novim Mandrake Linux sustavom, možete izabrati ovu opciju. Budite\n"
"pažljivi sa ovim rješenjem, nećete moći\n"
"povratiti vaš izbor nakon potvrde.\n"
"\n"
" * \"Koristiti slobodan prostor na Windows particiji\": ukoliko je "
"Microsoft\n"
"Windows instaliran na vašem hard disku i zauzima\n"
"cjeli raspoloživ prostor na njemu, trebate napraviti slobodan prostor za\n"
"Linux podatke. Da biste to napravili možete obrisati vašu\n"
"Microsoft Windows particiju i podatke (pogledajte \"Brisanje cijelog diska"
"\"\n"
"ili \"Ekspert mod\" rješenja) ili mijenjati veličinu vaše\n"
"Microsoft Windows particije. Mijenjanje veličine može se obaviti bez\n"
"gubitka bilo kakvih podataka, ako prethodno defragmentirate Windows "
"particiju.\n"
"Ovo rješenje je preporučeno ukoliko želite koristiti zajedno Mandrake Linux\n"
"i Microsoft Windows-e na istom računalu.\n"
"\n"
"  Prije izabiranja ovog rješenja, molimo shvatite da će veličina vaše "
"Microsoft\n"
"Windows partiticije biti manja nego što je sada. To znači da ćete imati\n"
"manje slobodnog prostora pod\n"
"Microsoft Windows-ima za spremanje vaših podataka ili instaliranje novog "
"software-a.\n"
"\n"
" * \"Obiši Windowse\": ovo će jednostavno obri sati sve na disku i početi\n"
"particionirati sve ispočetka. Svi podaci na disku će biti izgubljeni;\n"
"\n"
" * \"Ekspertni mod\": Ukoliko želite particionirati ručno vaš hard disk, "
"možete\n"
"izabrati ovu opciju. Budite pažljivi prije\n"
"izabiranja ovog rješenja. Vrlo je moćno, ali i vrlo opasno. Možete\n"
"izgubiti sve vaše podatke vrlo lako. Zato,\n"
"nemojte izabrati ovo rješenje ukoliko ne znate što radite."

#: ../../help.pm_.c:341
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"OK\" to reboot the system. You can start\n"
"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
"soon as the computer has booted up again.\n"
"\n"
"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"which will automatically perform a whole installation without the help of\n"
"an operator, similar to the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"Replay\". This is a partially automated installation as the\n"
"partitioning step (and only this one) remains interactive;\n"
"\n"
"    * \"Automated\". Fully automated installation: the hard disk is\n"
"completely rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a great number of similar\n"
"machines. See the Auto install section on our web site;\n"
"\n"
" * \"Save packages selection\"(*): saves the package selection as done\n"
"previously. Then, when doing another installation, insert the floppy inside\n"
"the drive and run the installation going to the help screen by pressing on\n"
"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""
"Eto. Instalacija je završena i vaš GNU/Linux sustav je spreman za "
"korištenje.\n"
"Samo pritisnite \"U redu\" da bi ponovno pokrenuli sustav. Možete pokrenuti\n"
"GNU/Linux ili Windowse, što god želite (ako imate dva sustava), čim se\n"
"računalo ponovno podigne.\n"
"\n"
"\"Napredno\" dugme (samo u modu za stručnjake) će prikazati još dva "
"dugmeta: \n"
"\n"
" * \"napravi disketu za automatsku instalaciju\": za stvaranje "
"instalacijske\n"
"diskete koja će automatski izvršiti čitavu instalaciju bez pomoći "
"operatora,\n"
"sličnu instalaciji koju ste upravo namjestili.\n"
"\n"
"   Primjetite da su dvije različite opcije dostupne nakon pritiska na "
"dugme:\n"
"\n"
"    * \"Replay\". Ovo je djelomice automatizirana instalacija, pošto\n"
"particioniranje (i samo to) ostaje interaktivno;\n"
"\n"
"    * \"Automatska instalacija\". Potpuno automatizirana instalacija: tvrdi\n"
"disk se u potpunosti prebrisava, svi podaci se gube.\n"
"\n"
"   Ova opcija je dosta korisna pri instaliranju na veći broj sličnih "
"mašina.\n"
"Pogledajte odjeljak za automatsku instalaciju na našem web siteu;\n"
"\n"
" * \"Snimi odabir paketa\"(*): snima prethodni odabir paketa. Potom, pri "
"drugoj\n"
"instalaciji, stavite disketu u pogon i pokrenite instalaciju odlaskom u\n"
"ekran za pomoć pritiskom na [F1], te zadavanjem >>linux defcfg=\"floppy\"<<\n"
"naredbe.\n"
"\n"
"(*) Trebate FAT formatiranu disketu (da bi je napravili u GNU/Linuxu, "
"napišite\n"
"\"mformat a:\")"

#: ../../help.pm_.c:372
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a filesystem).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"any of it.\n"
"\n"
"Click on \"OK\" when you are ready to format partitions.\n"
"\n"
"Click on \"Cancel\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
"for bad blocks on the disk."
msgstr ""
"Svaka novo definirana particija mora biti\n"
"formatirana za korištenje (formatiranje znači pravljenje datotečnog "
"sustava).\n"
"\n"
"Trenutno, možete htjeti ponovno formatirati neke već postojeće particije\n"
"kako bi obrisali\n"
"podatke koje one posjeduju. Ukoliko želite to napraviti,\n"
"izaberite particije koje želite formatirati.\n"
"\n"
"Primjetite da nije nužno ponovno formatirati sve već postojeće particije.\n"
"Morate ponovno formatirati particije koje sadrže operativni sustav (poput \n"
"\"/\",\"/usr\" ili \"/var\") ali ne morate ponovno formatirati particije "
"koje\n"
"sadrže podatke koje želite zadržati (tipično \"/home\").\n"
"\n"
"Molimo budite pažljivi odabirom particija, poslije formatiranja, svi podaci\n"
"će biti obrisani i nećete ih moći povratiti.\n"
"\n"
"Pritisnite na \"U redu\" kada ste spremni za formatiranje particije.\n"
"\n"
"Pritisnite na \"Odustani\" kada želite izabrati druge particije za\n"
"instalaciju vašeg novog Mandrake Linux operativnog sustava.\n"
"\n"
"Pritisnite na \"Napredno\" ako želite izabrati particije koje će biti\n"
"provjeravane radi loših blokova (bad blocks)."

#: ../../help.pm_.c:398
msgid ""
"Your new Mandrake Linux operating system is currently being installed.\n"
"Depending on the number of packages you will be installing and the speed of\n"
"your computer, this operation could take from a few minutes to a\n"
"significant amount of time.\n"
"\n"
"Please be patient."
msgstr ""
"Vaš novi Mandrake Linux operativni sustav se trenutno instalira.\n"
"U Zavisnosti od broja paketa koliko instalirate i brzine vašeg računala,\n"
"ova operacija može potrajati od nekoliko minuta do značajne količine\n"
"vremena.\n"
"\n"
"\n"
"Molimo budite strpljivi."

#: ../../help.pm_.c:406
msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages have been updated since the initial release. Some bugs may have\n"
"been fixed, and security issues solved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Choose\n"
"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
"to install updated packages later.\n"
"\n"
"Choosing \"Yes\" displays a list of places from which updates can be\n"
"retrieved. Choose the one nearest you. Then a package-selection tree\n"
"appears: review the selection, and press \"Install\" to retrieve and\n"
"install the selected package(s), or \"Cancel\" to abort."
msgstr ""
"Dok instalirate Mandrake Linux, moguće je da su neki paketi već nadograđeni\n"
"od prvotne inačice. Neki bugovi su možda uklonjeni, i sigurnost poboljšana.\n"
"Da bi iskoristili prednosti tih nadogradnji, predloženo vam je da ih\n"
"skinete s Interneta. Izaberite \"Da\" ako ste povezani s Internetom, ili \"Ne"
"\"\n"
"ako biste radije instalirali nadograđene pakete kasnije.\n"
"\n"
"Odabir \"Da\" prikazuje popis mjesta otkuda se nadogradnje mogu skinuti.\n"
"Izaberite ono najbliže vama. Tada će se pojaviti stablo za odabir paketa:\n"
"pregledajte odabir i stisnite \"Instaliraj\" da bi skinuli i instalirali "
"odabrane\n"
"pakete, ili \"Odustani\" za prekid."

#: ../../help.pm_.c:419
msgid ""
"Before continuing, you should read carefully the terms of the license. It\n"
"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
"all the terms in it, click on the \"Refuse\" button which will immediately\n"
"terminate the installation. To continue with the installation, click on the\n"
"\"Accept\" button."
msgstr ""
"Prije nastavka trebate pažljivo pročitati stavke licence. Ona\n"
"pokriva cijelu Mandrake Linux distribuciju, i ako se ne slažete u svim\n"
"stavkama sadržanih u njoj, kliknite na \"Odbij\" gumb koji će automatski\n"
"završiti instalaciju. Za nastavak instalacije, kliknite na\n"
"\"Prihvati\" gumb."

#: ../../help.pm_.c:426
msgid ""
"At this point, it is time to choose the security level desired for the\n"
"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
"the data stored in it is crucial, the higher the security level should be.\n"
"However, a higher security level is generally obtained at the expense of\n"
"ease of use. Refer to the \"msec\" chapter of the ``Reference Manual'' to\n"
"get more information about the meaning of these levels.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""
"Sada treba odabrati željenu razinu sigurnosti računala. Opće pravilo jest "
"da\n"
"što je više računalo izloženo i podaci vrijedniji, to bi veća razina "
"sigurnosti\n"
"trebala biti. Međutim, veća razina sigurnosti utječe na jednostavnost "
"korištenja.\n"
"Pogledajte u \"msec\" poglavlje u ``Reference Manual'' za bolje obješnjenje\n"
"značenja tih razina.\n"
"\n"
"Ako ne znate što biste odabrali, ostavite podrazumijevanu opciju."

#: ../../help.pm_.c:436
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or from another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"Clear all\": this option deletes all partitions on the selected hard\n"
"drive;\n"
"\n"
" * \"Auto allocate\": this option enables to automatically create ext3 and\n"
"swap partitions in free space of your hard drive;\n"
"\n"
"\"More\": gives access to additional features:\n"
"\n"
" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
"for later partition-table recovery if necessary. It is strongly recommended\n"
"to perform this step;\n"
"\n"
" * \"Restore partition table\": allows to restore a previously saved\n"
"partition table from floppy disk;\n"
"\n"
" * \"Rescue partition table\": if your partition table is damaged, you can\n"
"try to recover it using this option. Please be careful and remember that it\n"
"can fail;\n"
"\n"
" * \"Reload partition table\": discards all changes and loads your initial\n"
"partition table;\n"
"\n"
" * \"Removable media automounting\": unchecking this option will force\n"
"users to manually mount and unmount removable medias such as floppies and\n"
"CD-ROMs.\n"
"\n"
" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
"your hard drive. This is recommended if you do not have a good knowledge of\n"
"partitioning;\n"
"\n"
" * \"Undo\": use this option to cancel your changes;\n"
"\n"
" * \"Toggle to normal/expert mode\": allows additional actions on\n"
"partitions (type, options, format) and gives more information;\n"
"\n"
" * \"Done\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
"\n"
" * Ctrl-d to delete a partition;\n"
"\n"
" * Ctrl-m to set the mount point.\n"
"\n"
"To get information about the different filesystem types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"U ovoj točki instalacije, trebate izabrati koje partiticije ćete koristiti "
"za\n"
"instalaciju vašeg novog Mandrake Linux sustava. Ukoliko su\n"
"particije već definirane (iz prethodne instalacije GNU/Linux-a ili iz\n"
"drugih particijskih alata), možete koristiti postojeće particije. Inače,\n"
"moraju biti definirane.\n"
"\n"
"Za pravljenje particija, morate prvo izabrati tvrdi disk. Možete izabrati \n"
"disk za particioniranje klikanjem na \"hda\" za prvi IDE disk, \"hdb\" za\n"
"drugi ili \"sda\" za prvi SCSI disk i tako dalje.\n"
"\n"
"Za particioniranje izabranog hard diska, možete izabrati ove opcije:\n"
"\n"
" * \"Obriši sve\": ova opcija će obrisati sve raspoložive particije na\n"
"odabranom hard disku.\n"
"\n"
" * \"Auto alokacija\": ova opcija vam dozvoljava da automatski napravite\n"
"\"Ext2\" i swap particije u slobodnom prostoru vašeg hard diska.\n"
"\n"
" * \"Dodatno\": pristup dodatnim mogućnostima:\n"
"\n"
"   * \"Spasi particijsku tablicu\": ukoliko je vaša particijska tablica\n"
"oštećena, možete probati spasiti ju koristeći ovu opciju. Molimo\n"
"budite pažljivi i zapamtite da ne mora biti uspješna.\n"
"\n"
"   * \"Povrati\": možete koristiti ovu opciju za odustajanje od vaših "
"promjena.\n"
"\n"
"   * \"Ponovno učitaj\": možete koristiti ovu opciju ukoliko želite vratiti\n"
"unazad sve promjene i učitati vašu inicijalnu particijsku tablicu\n"
"\n"
"   * \"Čarobnjak\": ukoliko želite koristiti čarobnjak za particioniranje "
"vašeg\n"
"hard diska, možete koristiti ovu opciju. Preporučeno je ukoliko \n"
"nemate dovoljno znanja oko particioniranja.\n"
"\n"
"   * \"Vrati sa diskete\": ukoliko ste spremili vašu particijsku tablicu na\n"
"disketu tijekom prijašnje instalacije, možete\n"
"je vratiti koristeći ovu opciju.\n"
"\n"
"   * \"Spremi na disketu\": ukoliko želite spremiti vašu particijsku tablicu "
"na\n"
"disketu kako biste je mogli kasnije vratiti, možete koristiti ovu\n"
"opciju. Jako je preporučljivo koristiti ovu opciju\n"
"\n"
"   * \"Završi\": kada ste završili s particioniranjem vašeg hard diska,\n"
"koristite ovu opciju za spremanje vaših promjena.\n"
"\n"
"Za informaciju, možete dohvatiti bilo koju opciju koristeći tastaturu:\n"
"navigiranje kroz particije se obavlja koristeći [Tab] i [Up/Down] strelice.\n"
"\n"
"Kada je particija odabrana, možete koristiti:\n"
"\n"
" * Ctrl-c za pravljenje novih particija (kada je prazna particija\n"
"izabrana)\n"
"\n"
" * Ctrl-d za brisanje particije\n"
"\n"
" * Ctrl-m za postavljanje točke montiranja\n"
"\n"
"Za informacije o raznim dostupnim datotečnim sustavima, pročitajte ext2fs\n"
"poglavlje u ``Reference Manual''\n"
"\n"
"Ukoliko instalirate na PPC računalo, željet ćete napraviti malu HFS\n"
"'bootstrap' particiju od najmanje 1MB koju će koristiti\n"
"yaboot bootloader. Ukoliko se odlučite za pravljenje malo veće \n"
"particije, recimo 50MB, možete ju pronaći korisnom za stavljanje\n"
"dodatnog kernela i ramdisk slike u slučaju nužde."

#: ../../help.pm_.c:507
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one you want to resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"Više od jedne Microsoft Windows particije su pronađene\n"
"na vašem hard disku. Molimo izaberite jednu kojoj želite promjeniti "
"veličinu\n"
"kako bi instalirali vaš novi Mandrake Linux operativni sustav.\n"
"\n"
"Svaka je particija popisana kako slijedi; \"Linux ime\", \"Windows ime\"\n"
"\"Kapacitet\".\n"
"\n"
"\"Linux ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska"
"\",\n"
"\"broj particije\" (naprimjer, \"hda1\").\n"
"\n"
"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
"ukoliko je on SCSI hard disk.\n"
"\n"
"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard\n"
"diskovima:\n"
"\n"
"   * \"a\" znači \"master hard disk na primarnom IDE kontroleru\",\n"
"\n"
"   * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\",\n"
"\n"
"   * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\",\n"
"\n"
"   * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\".\n"
"\n"
"Sa SCSI hard diskovima, \"a\" znači \"primarni hard disk\", \"b\" znači\n"
"\"sekundarni hard disk\", itd...\n"
"\n"
"\"Windows ime\" je slovo vašeg hard diska pod Windows-ima (prvi disk\n"
"ili particija se zove \"C:\")."

#: ../../help.pm_.c:538
msgid "Please be patient. This operation can take several minutes."
msgstr "Molimo budite strpljivi. Ova operacija može potrajati nekoliko minuta."

#: ../../help.pm_.c:541
msgid ""
"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
"installation or if you want to have greater control (\"Expert\"). You can\n"
"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
"system:\n"
"\n"
" * \"Install\": completely wipes out the old system, however, depending on\n"
"what is currently installed on your machine, you may be able to keep some\n"
"old partitions (Linux or otherwise) unchanged;\n"
"\n"
" * \"Upgrade\": this installation class allows to simply update the\n"
"packages currently installed on your Mandrake Linux system. It keeps the\n"
"current partitions of your hard drives as well as user configurations. All\n"
"other configuration steps remain available, similar to a normal\n"
"installation;\n"
"\n"
" * \"Upgrade Packages Only\": this new installation class allows you to\n"
"upgrade an existing Mandrake Linux system while keeping all system\n"
"configurations unchanged. Adding new packages to the current installation\n"
"is also possible.\n"
"\n"
"Upgrades should work fine on Mandrake Linux systems containing version\n"
"\"8.1\" or later.\n"
"\n"
"Depending on your knowledge of GNU/Linux, select one of the following\n"
"choices:\n"
"\n"
" * Recommended: choose this if you have never installed a GNU/Linux\n"
"operating system. The installation will be very easy and you will only be\n"
"asked a few questions;\n"
"\n"
" * Expert: if you have a good understanding of GNU/Linux, you may wish to\n"
"perform a highly customized installation. Some of the decisions you will\n"
"have to make may be difficult if you do not have good knowledge of\n"
"GNU/Linux, so it is not recommended that those without a fair amount of\n"
"experience select this installation class."
msgstr ""
"DrakX sada treba znati da li želite raditi podrazumijevanu instalaciju\n"
"(\"Preporučeno\") ili želite li imati veću kontrolu (\"Stručnjak\"). Možete\n"
"također izabrati da li želite novu instalaciju ili nadogradnju postojećeg\n"
"Mandrake Linux sustava:\n"
"\n"
" * \"Instalacija\": potuno briše stari sustav. U stvari, ovisno kako je "
"sačinjen\n"
"sustav, moći ćete zadržati neke stare (Linux ili ne) particije "
"nepromijenjene;\n"
"\n"
" * \"Dogradnja\": ova vrsta instalacije vam omogućuje da jednostavno "
"nadogradite\n"
"pakete instalirane u vašem Mandrake Linux sustavu. Zadržava particije na "
"vašem\n"
"tvrdom disku kao i postavke korisnika. Svi ostali koraci (u odnosu na "
"običnu\n"
"instalaciju) pri konfiguraciji ostaju dostupni;\n"
"\n"
" * \"Dogradnja paketa\": ova nova vrsta instalacije omogućuje dogradnju "
"postojećeg\n"
"Mandrake Linux sustava i zadržavanje svih sustavskih postavki. Dodavanje "
"novih\n"
"paketa postojećoj instalaciji je također moguće.\n"
"\n"
"Dogradnje bi trebale raditi dobro za Mandrake Linux sustave počev od \"8.1"
"\"\n"
"inačice.\n"
"\n"
"U zavisnosti od znanja u GNU/Linux, možete izabrati jednu od slijedećih\n"
"razina za instalaciju ili dogradnju\n"
"vašeg Mandrake Linux operativnog sustava:\n"
"\n"
"* Preporučeno: ukoliko nikad niste instalirali GNU/Linux operativni sustav \n"
"izaberite ovo. Instalacija će biti vrlo laka i pitati će vas samo nekoliko "
"pitanja.\n"
"\n"
"* Prilagođeno: ukoliko ste već upoznati sa GNU/Linux, možete izabrati\n"
"primarnu upotrebu (radna stanica, poslužitelj,\n"
"razvoj) za vaš sustav. Trebati ćete odgovoriti na više pitanja nego u\n"
"\"Preporučenoj\" instalacijskoj\n"
"klasi, zato trebate znati više o tome kako GNU/Linux radi kako bi izabrali\n"
"ovu instalacijsku klasu.\n"
"\n"
"* Stručnjak: ukoliko imate dobro znanje o GNU/Linux-u, možete izabrati ovu\n"
"instalacijsku klasu. Kao u \"Prilagođenoj\"\n"
"instalacijskoj klasi, moći ćete izabrati primarnu upotrebu za vaš sustav\n"
"(radna stanica, poslužitelj, razvoj). Budite jako\n"
"pažljivi prije nego što odaberete ovu instalacijsku klasu. Moći ćete\n"
"izvršiti visoko prilagođenu instalaciju.\n"
"Odgovori na neka pitanja mogu biti jako teški ukoliko nemate dobro znanje\n"
"GNU/Linux. Dakle, nemojte izabrati\n"
"ovu instalacijsku klasu ukoliko ne znate što radite."

#: ../../help.pm_.c:578
msgid ""
"Normally, DrakX selects the right keyboard for you (depending on the\n"
"language you have chosen). However, you might not have a keyboard that\n"
"corresponds exactly to your language: for example, if you are an English\n"
"speaking Swiss person, you may still want your keyboard to be a Swiss\n"
"keyboard. Or if you speak English but are located in Quebec, you may find\n"
"yourself in the same situation. In both cases, you will have to go back to\n"
"this installation step and select an appropriate keyboard from the list.\n"
"\n"
"Click on the \"More\" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-latin alphabet, you will be\n"
"asked on next dialog to choose the key binding that will switch the\n"
"keyboard layout between the latin and non latin layouts."
msgstr ""
"Obično, DrakX izabere pravu tipkovnicu za vas (ovisno o jeziku koji ste "
"odabrali)\n"
"i nećete ni vidjeti ovaj korak. Međutim, možda nemate tipkovnicu koja točno\n"
"odgovara vašem jeziku: npr. ako ste iz Švicarske a govorite engleski, možda\n"
"svejedno želite švicarsku tipkovnicu. Ili ako govorite engleski, a živite u\n"
"Quebecu, možda ćete se naći u sličnoj situaciji. U oba slučaja, morate se "
"vratiti\n"
"na ovaj instalacijski korak i odabrati odgovarajuću tipkovnicu iz popisa.\n"
"\n"
"Pristisnite \"Dodatno\" da biste dobili potpun popis podržanih tipkovnica."

#: ../../help.pm_.c:594
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Please choose your preferred language for installation and system usage.\n"
"\n"
"Clicking on the \"Advanced\" button will allow you to select other\n"
"languages to be installed on your workstation. Selecting other languages\n"
"will install the language-specific files for system documentation and\n"
"applications. For example, if you will host users from Spain on your\n"
"machine, select English as the main language in the tree view and in the\n"
"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
"\n"
"Note that multiple languages may be installed. Once you have selected any\n"
"additional locales, click the \"OK\" button to continue."
msgstr ""
"Izaberite jezik kojim se želite služiti u instalaciji i sustavu.\n"
"\n"
"Pritiskom na \"Napredno\" moći ćete izabrati druge jezike koji će biti "
"instalirani\n"
"na vašu radnu stanicu. Odabiranjem drugih jezika instalirat će se "
"specifične\n"
"jezične datoteke za sustavsku dokumentaciju i aplikacije. Npr. ako ćete na "
"svom\n"
"računalu imati korisnike iz Španjolske, u stablu odaberite Engleski kao "
"glavni\n"
"jezik i u sekciji Napredno označite kućicu koja odgovara Španjolskoj.\n"
"\n"
"Primjetite da se može instalirati više jezika. Kada odredite eventualne "
"dodatne\n"
"lokale, stisnite \"U redu\" za nastavak."

#: ../../help.pm_.c:609
msgid ""
"DrakX generally detects the number of buttons your mouse has. If not, it\n"
"assumes you have a two-button mouse and will set it up for third-button\n"
"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
"USB mouse.\n"
"\n"
"If you wish to specify a different type of mouse select the appropriate\n"
"type from the provided list.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct. If the mouse is not working well, press the space bar or [Return]\n"
"to \"Cancel\" and choose again.\n"
"\n"
"Wheel mouses are sometimes not automatically detected. You will need to\n"
"manually select it in the list. Be sure to select the one corresponding to\n"
"the correct port it is attached to. After you have pressed the \"OK\"\n"
"button, a mouse image is displayed. You then need to move the wheel of your\n"
"mouse to activate it correctly. Then test all buttons and movements are\n"
"correct."
msgstr ""
"DrakX obično prepozna koliko vaš miš ima dugmeta. Ako ne, pretpostavlja da\n"
"imate miš sa dva dugmeta, a treće će emulirati. DrakX će automatski znati da "
"li\n"
"se radi o PS/2, serijskom ili USB mišu.\n"
"\n"
"Ako želite odrediti drugačiji tip miša, odaberite odgovarajući tip iz "
"ponuđenog\n"
"popisa.\n"
"\n"
"Ako izaberete miš različit od podrazumijevanog, prikazati će se testni "
"ekran.\n"
"Koristite dugmad i kotačić da potvrdite da li su postavke točne. Ako miš ne "
"radi\n"
"dobro, stisnite razmaknicu ili [Return] da bi odustali i ponovno izabirali."

#: ../../help.pm_.c:630
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Molim odaberite ispravni port. Na primjer, COM1 port pod MS Windowsima\n"
"se,  pod GNU/Linuxom zove \"ttyS0\"."

#: ../../help.pm_.c:634
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"root\" is the system\n"
"administrator and is the only one authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
"choose not to enter a password, but we strongly advise you against this if\n"
"only for one reason: do not think that because you booted GNU/Linux that\n"
"your other operating systems are safe from mistakes. Since \"root\" can\n"
"overcome all limitations and unintentionally erase all data on partitions\n"
"by carelessly accessing the partitions themselves, it is important for it\n"
"to be difficult to become \"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password - it makes it too\n"
"easy to compromise a system.\n"
"\n"
"However, please do not make the password too long or complicated because\n"
"you must be able to remember it without too much effort.\n"
"\n"
"The password will not be displayed on screen as you type it in. Hence, you\n"
"will have to type the password twice to reduce the chance of a typing\n"
"error. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will have to be used the first time you connect.\n"
"\n"
"In Expert mode, you will be asked if you will be connecting to an\n"
"authentication server, like NIS or LDAP.\n"
"\n"
"If your network uses either of the LDAP, NIS, or PDC Windows Domain\n"
"authentication services, select the appropriate one as \"authentication\".\n"
"If you do not know, ask your network administrator.\n"
"\n"
"If your computer is not connected to any administrated network, you will\n"
"want to choose \"Local files\" for authentication."
msgstr ""
"Ovo je najvažnija odluka za sigurnost vašeg GNU/Linux sustava: morate "
"unijeti\n"
"\"root\" lozinku. \"root\" je sustavski administrator i jedini koji je "
"ovlašten\n"
"da vrši nadogradnje, dodaje korisnike, mijenja cjelokupne postavke sustava, "
"itd.\n"
"Ukratko, \"root\" može raditi sve! Stoga morate izabrati lozinku koju je "
"teško\n"
"pogoditi, DrakX će vam reći da li je prelagana. Kao što vidite, možete "
"odabrati\n"
"da ne unesete lozinku, ali jako vam savjetujemo da to ne činite, barem zbog\n"
"jednog razloga: nemojte mislite da, zbog tog što ste pokrenuli GNU/Linux, su "
"vaši\n"
"ostali operacijski sustavi sigurni od grešaka. Pošto \"root\" može "
"premostiti\n"
"sva ograničenja i nenamjerno obrisati sve podatke na particijama nemarnim "
"pristupanjem,\n"
"važno je da bude teško postati \"root\".\n"
"\n"
"Lozinka bi trebala biti kombinacija alfanumeričkih znakova i barem 8 znakova "
"duga.\n"
"Nikad ne zapisujte \"root\" lozinku, prelako dovodite sustav u opasnost.\n"
"\n"
"Ipak, nemojte izabrati predugu ili presloženu lozinku, jer ćete je morati "
"lako\n"
"zapamtiti.\n"
"\n"
"Lozinka se neće pojaviti na ekranu kako je budete upisivali. Zato je morate\n"
"upisati dvaput da bi smanjili mogućnost greške pri upisu. Ako ipak ponovite "
"istu\n"
"grešku dva puta, morat ćete koristiti ovu \"netočnu\" lozinku kada se prvi "
"put\n"
"budete prijavljivali.\n"
"\n"
"U stručnjak modu, bit ćete zapitani da li ćete se spajati na "
"autentifikacijski\n"
"poslužitelj, poput NISa ili LDAPa.\n"
"\n"
"Ako vaša mreža koristi LDAP (ili NIS) protokole za autentifikaciju, "
"izaberite\n"
"\"LDAP\" (ili \"NIS\") kao autentifikaciju. Ako ne znate kako, pitajte\n"
"administratora mreže.\n"
"\n"
"Ako vaše računalo nije povezano sa administriranom mrežom, morat ćete "
"izabrati\n"
"\"Lokalne datoteke\" za autentifikaciju."

#: ../../help.pm_.c:670
msgid ""
"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
"accordingly, depending on what it finds here:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
"OS;\n"
"\n"
" * if a grub or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"If in doubt, DrakX will display a dialog with various options.\n"
"\n"
" * \"Bootloader to use\": you have three choices:\n"
"\n"
"    * \"GRUB\": if you prefer grub (text menu).\n"
"\n"
"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
"interface.\n"
"\n"
"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
"interface.\n"
"\n"
" * \"Boot device\": in most cases, you will not change the default\n"
"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
"\n"
" * \"Delay before booting the default image\": when rebooting the computer,\n"
"this is the delay granted to the user to choose - in the bootloader menu,\n"
"another boot entry than the default one.\n"
"\n"
"!! Beware that if you choose not to install a bootloader (by selecting\n"
"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
"Linux system! Also, be sure you know what you do before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
"options, which are reserved for the expert user."
msgstr ""
"LILO i grub su GNU/Linux bootloaderi. Ovaj korak je obično potpuno "
"automatiziran.\n"
"U stvarim DrakX analizira boot sektor diska i ponaša se u skladu s onim što "
"je\n"
"tamo pronašao:\n"
"\n"
" * ako je pronađen Windows boot sektor, bit će zamijenjen sa grub/LILO boot "
"sektorom.\n"
"Prema tome, moći ćete podizati ili GNU/Linux ili neki drugi OS;\n"
"\n"
" * ako je pronađen grub/LILO boot sektor, bit će zamijenjen sa novim.\n"
"\n"
"Ako postoji neka dvojba, DrakX će izbaciti dijalog za različitim opcijama.\n"
"\n"
" * \"Koji bootloader koristiti\": imate tri izbora:\n"
"\n"
"    * \"GRUB\": ako preferirate grub (tekstualni izbornik).\n"
"\n"
"    * \"LILO sa grafičkim izbornikom\": ako preferirate LILO sa svojim\n"
"grafičkim sučeljem.\n"
"\n"
"    * \"LILO sa tekstualnim izbornikom\": ako preferirate LILO sa svojim\n"
"tekstualnim sučeljem.\n"
"\n"
" * \"Boot uređaj\": u većini slučajeva, nećete mijenjati podrazumijevani\n"
"(\"/dev/hda\"), ali ak vam je tako draže, bootloader se može instalirati na "
"drugi\n"
"tvrdi disk (\"/dev/hdb\"), ili čak na disketu (\"/dev/fd0\");\n"
"\n"
" * \"Vrijeme do podizanja podrazumijevane slike\": kada pokrećete računalo,\n"
"ovo je vrijeme koje korisnik ima da u bootloader izborniku izabere drugi "
"izbor\n"
"od podrazumijevanog.\n"
"\n"
"!! Pazite da, ako izaberete da se bootloader ne instalira (pritiskom na\n"
"\"Odustani\"), morate na neki drugi način osigurati podizanje Mandrake/"
"Linux\n"
"sustava! Također, budite sigurni da znate što radite prije mijenjanja "
"opcija. !!\n"
"\n"
"Pritiskom na \"Napredno\" u ovom dijalogu dobit ćete mnoštvo naprednih "
"opcija,\n"
"rezerviranih za napredne korisnike.\n"
"\n"
"Nakon što ste namjestili opće parametre bootloadera, bit će prikazan popis "
"opcija\n"
"za podizanje sustava koje će biti dostupne prilikom podizanja sustava.\n"
"\n"
"Ako postoji neki drugi operacijski sustav instaliran na vašem računalu, "
"automatski\n"
"će biti dodan boot izborniku. Ovdje možete fino podesiti postojeće opcije. "
"Izaberite\n"
"stavku i stisnite \"Promijeni\" da bi je promijenili ili uklonili; \"Dodaj\" "
"stvara\n"
"novu stavku; i \"Završi\" kreće dalje na slijedeći instalacijski korak."

#: ../../help.pm_.c:710
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options which will be available at boot time will be displayed.\n"
"\n"
"If there is another operating system installed on your machine, it will\n"
"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
"the existing options. Select an entry and click \"Modify\" to modify or\n"
"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
"installation step.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone. In which case, you can delete the corresponding entries. But then,\n"
"you will need a boot disk in order to boot those other operating systems!"
msgstr ""
"LILO (the LInux LOader) i Grub su bootloaderi: oni su u mogućnosti podići\n"
"ili GNU/Linux ili bilo koji drugi postojeći operativni sustav na vašem\n"
"računalu.\n"
"Normalno, ti drugi operativni sustavi su ispravno pronađeni i\n"
"instalirani. Ako to nije slučaj, možete ga dodati ručno na ovom\n"
"zaslonu. Budite pažljivi da izaberete ispravne parametre.\n"
"\n"
"Također ćete poželiti ne dati pristup tim drugim operativnim sustavima\n"
"drugima, u tom slučaju možete obrisati odgovarajuće unose. Ali\n"
"u tom slučaju, trebati ćete boot disketu kako bi ih mogli podići!"

#: ../../help.pm_.c:724
msgid ""
"You must indicate where you wish to place the information required to boot\n"
"to GNU/Linux.\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of drive\n"
"(MBR)\"."
msgstr ""
"Sada morate odabrati gdje želite staviti zahtijevane informacije za "
"podizanje\n"
"GNU/Linuxa.\n"
"\n"
"Ako ne znate točno što radite, izaberite \"Prvi sektor diska\n"
"(MBR)\"."

#: ../../help.pm_.c:731
msgid ""
"Here, we select a printing system for your computer. Other OSs may offer\n"
"you one, but Mandrake Linux offers three.\n"
"\n"
" * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n"
"a direct connection to your printer and you want to be able to panic out of\n"
"printer jams, and you do not have networked printers. It will handle only\n"
"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
"after installation by running PrinterDrake from the Mandrake Control Center\n"
"and clicking the expert button.\n"
"\n"
" * \"CUPS\" - ``Common Unix Printing System'', is excellent at printing to\n"
"your local printer and also halfway-around the planet. It is simple and can\n"
"act as a server or a client for the ancient \"lpd\" printing system. Hence,\n"
"it is compatible with the systems that went before. It can do many tricks,\n"
"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
"graphical front-ends for printing or choosing printer options.\n"
"\n"
" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
"approximately the same things the others can do, but it will print to\n"
"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
"and it can print directly to shell commands. If you have need of Novell or\n"
"printing to commands without using a separate pipe construct, use lprNG.\n"
"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
"networks."
msgstr ""
"Ovdje biramo sustav za ispis za vaše računalo. Drugi OSovi možda nude "
"jedan,\n"
"ali Mandrake Linux nudi tri.\n"
"\n"
" * \"pdq\", što znači ``print, don't queue'' (ispiši, bez stavljanja u red), "
"je\n"
"izbor koji ćete koristiti ako imate izravnu vezu sa pisačem, želite izbjeći\n"
"zastoje u ispisu i nemate pisače u mreži. Ima samo jednostavne mrežne "
"mogućnosti\n"
"i ponešto je spor za mrežu. Izaberite \"pdq\" ako ste novi u GNU/Linuxu. "
"Možete\n"
"promijeniti odabir poslije instalacije pokretanjem PrinterDrakea iz "
"Mandrake\n"
"kontrolnog centra i pritiskom na dugme za stručnjake.\n"
"\n"
" * \"CUPS\"``Common Unix Printing System'', je izvrstan za ispis na vašem "
"lokalnom\n"
"računalu, kao i za ispis na drugom kraju svijeta. Jednostavan je i može "
"poslužiti\n"
"kao poslužitelj i klijent za drevni \"lpd\" sustav za ispis. Dakle, "
"kompatibilan je\n"
"s ranijim sustavima. Ima mnoštvo trikova, ali osnovne postavke su gotovo\n"
"jednostavne kao i \"pdq\". Ako trebate da vam emulira \"lpd\" poslužitelj, "
"morate\n"
"uključiti \"cups-lpd\" daemon. Ima grafička sučelja za ispis i za odabir "
"opcija\n"
"za ispis.\n"
"\n"
" * \"lprNG\"``line printer daemon New Generation''. Ovaj sustav može raditi\n"
"otprilike iste stvari kao i ostali, ali će pisati i s pisačima u Novell "
"mreži,\n"
"jer podržava IPX protokol, i može ispisivati izravno u komande ljuske. Ako "
"vam\n"
"treba Novell ili ispis u komande bez korištenja preusmjeravanja, koristite "
"lprNG.\n"
"Inačem CUPS je najbolji jer je jednostavniji i bolje radi preko mreže."

#: ../../help.pm_.c:759
msgid ""
"DrakX now detects any IDE devices present in your computer. It will also\n"
"scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection does not always detect a piece of hardware,\n"
"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
"if you know that there is a SCSI card installed in your machine. You will\n"
"be presented with a list of SCSI cards to choose from. Click \"No\" if you\n"
"have no SCSI hardware. If you are unsure, you can check the list of\n"
"hardware detected in your machine by selecting \"See hardware info\" and\n"
"clicking \"OK\". Examine the list of hardware and then click on the \"OK\"\n"
"button to return to the SCSI interface question.\n"
"\n"
"If you have to manually specify your adapter, DrakX will ask if you want to\n"
"specify options for it. You should allow DrakX to probe the hardware for\n"
"the card-specific options which the hardware needs to initialize. This\n"
"usually works well.\n"
"\n"
"If DrakX is not able to probe for the options which need to be passed, you\n"
"will need to provide options to the driver manually. Please review the\n"
"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
"Hardware'' section) for hints on retrieving the parameters required from\n"
"hardware documentation, from the manufacturer's web site (if you have\n"
"Internet access) or from Microsoft Windows (if you used this hardware with\n"
"Windows on your system)."
msgstr ""
"DrakX sada pretražuje IDE uređaje prisutne u vašem računalu.Također će "
"pokušati\n"
"pronaći PCI SCSI adapter(e). Ukoliko DrakX\n"
"pronađe SCSI adapter i zna koji upravljački program da koristi, on će \n"
"automatski biti instaliran.\n"
"\n"
"Ukoliko imate SCSI adapter, ISA SCSI adapter ili PCI SCSI adapter koji\n"
"DrakX ne može prepoznati, biti ćete pitani da li imate SCSI adapter u vašem\n"
"sustavu. Ukoliko nemate adapter, možete kliknuti na \"Ne\". Ukoliko kliknete "
"na\n"
"\"Da\", dobiti ćete popis upravljačkih programa odakle možete izabrati vaš\n"
"specifičan adapter.\n"
"\n"
"Ako trebate ručno specifirati vaš adapter, DrakX će pitati da li želite \n"
"specifirati opcije za njega. Trebali biste dozvoliti DrakX-u da isproba "
"opcije za\n"
"hardware. Ovo obično radi dobro.\n"
"\n"
"Ako ne, trebati ćete navesti opcije za upravljački program. Molimo\n"
"pregledajte User\n"
"Guide (poglavlje 3, sekciju \"Collecting informations on your hardware\") "
"za\n"
"preporuke o pribavljanju ovih informacija iz dokumentacije hardware-a, sa \n"
"proizvođačevog Web site-a (ukoliko imate Internet pristup) ili iz Microsoft "
"Windows-a\n"
"(ukoliko ga imate na vašem sustavu)."

#: ../../help.pm_.c:786
msgid ""
"You can add additional entries for yaboot, either for other operating\n"
"systems, alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSs, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is simply the name you will have to type at the yaboot\n"
"prompt to select this boot option;\n"
"\n"
" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
"or a variation of vmlinux with an extension;\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
"\n"
" * Append: on Apple hardware, the kernel append option is used quite often\n"
"to assist in initializing video hardware, or to enable keyboard mouse\n"
"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
"Apple mouse. The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules, before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation;\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
"need to allocate a large ramdisk, this option can be used;\n"
"\n"
" * Read-write: normally the \"root\" partition is initially brought up in\n"
"read-only, to allow a file system check before the system becomes ``live''.\n"
"Here, you can override this option;\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support;\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
"selections."
msgstr ""
"Možete dodati dodatne unose za yaboot, ili za drugi operativni sustav,\n"
"alternativne kernele, ili za spasonosnu boot sliku.\n"
"\n"
"Za druge OS-ove - unos se sastoji samo od labele i \"root\" particije.\n"
"\n"
"Za Linux, postoji nekoliko mogućih opcija: \n"
"\n"
" * Labela: Jednostavno, ovo je ime koje ćete napisati u yaboot promptu za\n"
"odabir ove boot opcije.\n"
"\n"
" * Slika: Ovo je ime kernela koji se podiže. Tipično vmlinux ili\n"
"varijacija vmlinux-a sa ekstenzijom;\n"
"\n"
" * Root: \"root\" uređaj ili '/' za vašu Linux instalaciju.\n"
"\n"
" * Dodatak: Na Apple hardware-u, kernel dodatak opcija se koristi vrlo često "
"za\n"
"pomoć pri inicijaliziranju video hardware-a, ili za omogućavanje emulacije\n"
"tipaka na mišu tipkovnicom zbog čestog nedostatka 2-og ili 3-eg tipke na "
"Apple\n"
" miševima. Neki primjeri:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
"\n"
" * Initrd: Ova opcija se može koristiti ili za učitavanje inicijalnih\n"
"modula, prije nego što je boot\n"
"uređaj raspoloživ, ili za učitavanje ramdisk slike za spasonosne boot "
"situacije.\n"
"\n"
" * Initrd-veličina: Podrazumijevana veličina ramdisk-a je općenito 4096\n"
"byte-ova. Ukoliko trebate alocirati veći ramdisk, ova opcija može biti "
"korištena.\n"
"\n"
" * Čitaj-Piši: Normalno je \"root\" particija inicijalno podignuta u čitaj-"
"samo,\n"
"radi mogućnosti provjere datotečnog sustava prije nego sustav postane "
"'živ'.\n"
"Možete premostiti tu opciju ovdje.\n"
"\n"
" * NoVideo: Ako se Apple hardware pokaže kao iznimno problematičan, možete\n"
"izabrati ovu opciju za podizanje u 'novideo' modu, sa native framebuffer "
"podrškom.\n"
"\n"
" * Podrazumijevano: Izabire ovaj unos kao podrazumijevani Linux izbor,\n"
"moguće izbirati pritiskom ENTER-a na yaboot pitanju. Ovaj unos će također\n"
"biti označen sa '*', ukoliko stisnete [Tab] za pregledavanje boot izbora."

#: ../../help.pm_.c:833
msgid ""
"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
"these other operating systems are correctly detected and installed. If this\n"
"is not the case, you can add an entry by hand in this screen. Be careful to\n"
"choose the correct parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt;\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information;\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second before your\n"
"default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt;\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt;\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""
"Yaboot je bootloader za NewWorld MacIntosh hardware. Može\n"
"podići GNU/Linux, MacOS, ili MacOSX, ukoliko postoje na vašem računalu.\n"
"Obično, ti drugi operativni sustavi su ispravno pronađeni i\n"
"instalirani. Ukoliko to nije slučaj, možete dodati unos ručno na ovom\n"
"zaslonu. Budite pažljivi da izaberete ispravne parametre.\n"
"\n"
"Glavne opcije Yaboota su:\n"
"\n"
" * Init Poruka: Jednostavna tekst poruka koja se prikaže prije pitanja o\n"
"podizanju.\n"
"\n"
" * Boot Uređaj: Označava gdje želite staviti informaciju potrebnu za \n"
"podizanje GNU/Linux-a. Općenito, bootstrap particiju namještate prije, \n"
"da sadrži ovu informaciju.\n"
"\n"
" * Otvorena Firmware Pauza: Za razliku od LILO-a, postoje dvije raspoložive\n"
"pauze sa yaboot-om.  Prva pauza se mjeru sekundama i na tom mjestu možete \n"
"birati izmežu CD-a, OF boot-a, MacOS-a ili Linux-a.\n"
"\n"
" * Kernel Boot Čekanje: Ovo čekanje je slično LILO boot čekanju. Poslije \n"
"izabiranja Linux-a, imati ćete pauzu od 0.1 sekunde prije nego "
"podrazumijevani\n"
"kernel opis bude odabran.\n"
"\n"
" * Omogući CD Boot?: Postavljanje ove opcije će vam dozvoliti da možete\n"
"izabrati 'C' za CD na prvom pitanju pri podizanju.\n"
"\n"
" * Omogući OF Boot?: Postavljanje ove opcije će vam dozvoliti da možete\n"
"izabrati 'N' za Open Firmware prvi prvom pitanju pri podizanju.\n"
"\n"
" * Podrazumijevani OS: Možete izabrati koji OS ćete podići podrazumijevano\n"
"kada Open Firmware pauza istekne."

#: ../../help.pm_.c:865
msgid ""
"Here are presented various parameters concerning your machine. Depending on\n"
"your installed hardware, you may - or not, see the following entries:\n"
"\n"
" * \"Mouse\": check the current mouse configuration and click on the button\n"
"to change it if necessary;\n"
"\n"
" * \"Keyboard\": check the current keyboard map configuration and click on\n"
"the button to change that if necessary;\n"
"\n"
" * \"Timezone\": DrakX, by default, guesses your time zone from the\n"
"language you have chosen. But here again, as for the choice of a keyboard,\n"
"you may not be in the country for which the chosen language should\n"
"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
"order to configure the clock according to the time zone you are in;\n"
"\n"
" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``User\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation;\n"
"\n"
" * \"Sound card\": if a sound card is detected on your system, it is\n"
"displayed here. No modification possible at installation time;\n"
"\n"
" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
"here. No modification possible at installation time;\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
"displayed here. You can click on the button to change the parameters\n"
"associated with it."
msgstr ""
"Ovdje su predstavljeni različiti parametri za vaše računalo. Ovisno o\n"
"instaliranom hardveru, vidjet ćete ili ne slijedeće stavke:\n"
"\n"
" * \"Miš\": možete provjeriti trenutne postavke miša i promijeniti\n"
"ih, ako treba, pritiskom na dugme;\n"
"\n"
" * \"Tipkovnica\": možete provjeriti trenutnu postavu tipkovnice i "
"promijeniti\n"
"je, ako treba, pritiskom na dugme;\n"
"\n"
" * \"Vremenska zona\": DrakX, podrazumijevano, pogađa vremensku zonu prema\n"
"izabranom jeziku. Ali i ovdje, kao i kod izbora tipkovnice, možda niste u "
"zemlji\n"
"za koju bi izabrani jezik trebao odgovarati. Stoga, možda ćete trabati "
"stisnuti\n"
"\"Vremenska zona\" dugme da bi namjestili sat prema vašoj vremenskoj zoni;\n"
"\n"
" * \"Pisač\": pritiskom na \"Nema pisača\" dugme otvorit će se čarobnjak za\n"
"namještanje pisača;\n"
"\n"
" * \"Zvučna kartica\": ako je zvučna kartica nađena, bit će ovdje "
"prikazana.\n"
"Nije je moguće mijenjati tijekom instalacije;\n"
"\n"
" * \"TV kartica\": ako je nađena TV kartica, ovdje će biti prikazana. Nije "
"je\n"
"moguće mijenjati tijekom instalacije;\n"
"\n"
" * \"ISDN kartica\": ako je nađena ISDN kartica, ovdje će biti prikazana. "
"Možete\n"
"mijenjati njene parametre pritiskom na dugme."

#: ../../help.pm_.c:896
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
"and will not be recoverable!"
msgstr ""
"Izaberite hard disk kojeg želite obrisati kako bi instalirali vašu\n"
"novu Mandrake Linux particiju. Budite pažljivi, svi postojeći podaci\n"
"biti će izgubljen i neće se moći povratiti!"

#: ../../help.pm_.c:901
msgid ""
"Click on \"OK\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"Cancel\" to cancel this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"Izaberite \"U redu\" ukoliko želite obrisati sve podatke i\n"
"postojeće particije na navedenom tvrdom disku. Budite pažljivi, nakon\n"
"klikanja na \"U redu\", nećete moći povratiti bilo kakve postojeće podatke "
"ili\n"
"particije na ovom hard disku, uključujući Windows podatke.\n"
"\n"
"Pritisnite na \"Odustani\" za prekidanje ove operacije bez gubljenja bilo\n"
"kakvih postojećih podataka i particija na ovom hard disku."

#: ../../install2.pm_.c:111
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"Ne mogu pristupiti kernel modulima koji odgovaraju vašem kernelu (datoteka %"
"s nedostaje), ovo obično znači da vaša disketa za dizanje sustava nije "
"usklađena sainstalacijskim medijem (napravite noviju boot disketu)"

#: ../../install2.pm_.c:167
#, c-format
msgid "You must also format %s"
msgstr "Morate također formatirati %s"

#: ../../install_any.pm_.c:423
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new could be found. In that case, you must make sure to "
"upgrade\n"
"as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"Izabrali ste slijedeće poslužitelje: %s\n"
"\n"
"\n"
"Ti poslužitelji biti će postavljeno aktivirani. Oni nemaju poznatih "
"sigurnosnih\n"
"propusta, ali neki novi mogu biti pronađeni. U tom slučaju, morate ga "
"nadograditi\n"
"što prije moguće.\n"
"\n"
"\n"
"Da li zaista želite instalirati te poslužitelje?\n"

#: ../../install_any.pm_.c:441
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""

#: ../../install_any.pm_.c:471
msgid "Can't use broadcast with no NIS domain"
msgstr "Ne mogu koristiti broadcast bez NIS domene"

#: ../../install_any.pm_.c:862
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "Umetnite FAT formatiranu disketu u pogon %s"

#: ../../install_any.pm_.c:866
msgid "This floppy is not FAT formatted"
msgstr "Ova disketa nije FAT formatirana"

#: ../../install_any.pm_.c:878
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"Za korištenje spremljenog odabira paketa, podignite instalaciju sa ``linux "
"defcfg=floppy''"

#: ../../install_any.pm_.c:901 ../../partition_table.pm_.c:767
#, c-format
msgid "Error reading file %s"
msgstr "Greška prilikom čitanja datoteke %s"

#: ../../install_any.pm_.c:1023
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Pojavila se greška - ne mogu pronaći niti jedan valjani uređaj na kojem\n"
"bih mogao instalirati datotečni sustav. Provjerite da li je sa vašim "
"hardverom sve u redu."

#: ../../install_interactive.pm_.c:23
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Neki hardware na vašem računalu treba ``vlasničke'' upravljačke programe\n"
"kako bi proradio. Možete naći više informaciju o tome na: %s"

#: ../../install_interactive.pm_.c:58
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Morate imati root particiju.\n"
"Prvo napravite particiju (ili kliknite na postojeću) te\n"
"odaberite akciju ``Mjesto monitranja'' te odaberite `/'"

#: ../../install_interactive.pm_.c:63
msgid "You must have a swap partition"
msgstr "Morate imati swap particiju"

#: ../../install_interactive.pm_.c:64
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Swap particija ne postoji\n"
"\n"
"Da ipak nastavim?"

#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:169
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Morate imati FAT particiju montiranu na /boot/efi"

#: ../../install_interactive.pm_.c:92
msgid "Use free space"
msgstr "Koristi slobodan prostor"

#: ../../install_interactive.pm_.c:94
msgid "Not enough free space to allocate new partitions"
msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"

#: ../../install_interactive.pm_.c:102
msgid "Use existing partitions"
msgstr "Koristi postojeće particije"

#: ../../install_interactive.pm_.c:104
msgid "There is no existing partition to use"
msgstr "Nema postojećih particija koje bih mogao upotrijebiti"

#: ../../install_interactive.pm_.c:111
msgid "Use the Windows partition for loopback"
msgstr "Koristi Windows particiju za loopback"

#: ../../install_interactive.pm_.c:114
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Koju particiju želite koristiti za Linux4Win?"

#: ../../install_interactive.pm_.c:116
msgid "Choose the sizes"
msgstr "Odaberite veličinu"

#: ../../install_interactive.pm_.c:117
msgid "Root partition size in MB: "
msgstr "Veličina korijenske particije u MB: "

#: ../../install_interactive.pm_.c:118
msgid "Swap partition size in MB: "
msgstr "Veličina swap particiju u MB: "

#: ../../install_interactive.pm_.c:128
msgid "Use the free space on the Windows partition"
msgstr "Iskoristi slobodan prostor na Windows particiji"

#: ../../install_interactive.pm_.c:131
msgid "Which partition do you want to resize?"
msgstr "Kojoj particiji želite promijeniti veličinu?"

#: ../../install_interactive.pm_.c:133
msgid "Resizing Windows partition"
msgstr "Izračunavam granice Windows datotečnog sustava"

#: ../../install_interactive.pm_.c:136
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"Program koji mjenja veličinu FAT-a ne može rukovati vašom particijom, \n"
"slijedeća greška se dogodila: %s"

#: ../../install_interactive.pm_.c:139
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
"installation."
msgstr ""
"Vaša Windows particija je prefragmentirana, molim pokrenite ``defrag'' prvo."

#: ../../install_interactive.pm_.c:140
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful:\n"
"this operation is dangerous. If you have not already done\n"
"so, you should first exit the installation, run scandisk\n"
"under Windows (and optionally run defrag), then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"UPOZORENJE!\n"
"\n"
"DrakX sada mora promijeniti veličinu vaše Windows particije\n"
"Budite vrlo oprezni budući da je ova operacija\n"
"izuzetno opasna. Ukoliko još niste mijenjali veličinu particije molim\n"
"izađite prvo iz instalacije, pokrenite scandisk pod Windowsima (opcionalno "
"pokrenite defrag), tada ponovno pokrenite instalaciju.\n"
"Također preporučljivo je da sačuvate vaše podatke (napravite backup).\n"
"Kada ste sigurni da želite nastaviti, pritisnite U redu."

#: ../../install_interactive.pm_.c:150
msgid "Which size do you want to keep for Windows on"
msgstr "Koliku veličinu želite zadržati za windowse"

#: ../../install_interactive.pm_.c:151
#, c-format
msgid "partition %s"
msgstr "particija %s"

#: ../../install_interactive.pm_.c:158
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Mijenjanje FAT veličine nije uspjelo: %s"

#: ../../install_interactive.pm_.c:173
msgid ""
"There is no FAT partition to resize or to use as loopback (or not enough "
"space left)"
msgstr ""
"Nema FAT particije za mjenjanje veličine ili za korištenje loopback-a (ili "
"nema dovoljno prostora)"

#: ../../install_interactive.pm_.c:179
msgid "Erase entire disk"
msgstr "Obriši cijeli disk"

#: ../../install_interactive.pm_.c:179
msgid "Remove Windows(TM)"
msgstr "Ukloni Windowse(TM)"

#: ../../install_interactive.pm_.c:182
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "Imate više od jednog hard diska, na koji želite instalirati Linux?"

#: ../../install_interactive.pm_.c:185
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "SVE postojeće particije i podaci biti će izgubljeni na disku %s"

#: ../../install_interactive.pm_.c:193
msgid "Custom disk partitioning"
msgstr "Proizvoljno particioniranje diska"

#: ../../install_interactive.pm_.c:197
msgid "Use fdisk"
msgstr "Koristi fdisk"

#: ../../install_interactive.pm_.c:200
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"Sada možete razdijeliti %s.\n"
"Kada ste gotovi ne zaboravite spremiti postavu sa `w'"

#: ../../install_interactive.pm_.c:229
msgid "You don't have enough free space on your Windows partition"
msgstr "Nemate dovoljno slobodnog prostora na vašoj Windows particiji"

#: ../../install_interactive.pm_.c:245
msgid "I can't find any room for installing"
msgstr "Ne mogu pronaći bilo kakvo mjesto za instaliranje"

#: ../../install_interactive.pm_.c:248
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX čarobnjak za particioniranje je pronašao slijedeća rješenja:"

#: ../../install_interactive.pm_.c:252
#, c-format
msgid "Partitioning failed: %s"
msgstr "Particioniranje neuspjelo: %s"

#: ../../install_interactive.pm_.c:262
msgid "Bringing up the network"
msgstr "Podižem mrežu"

#: ../../install_interactive.pm_.c:267
msgid "Bringing down the network"
msgstr "Onemogućujem mrežu"

#: ../../install_steps.pm_.c:76
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Dogodila se greška, ali neznam kako s njom lijepo rukovati.\n"
"Nastavite dalje na vlastiti rizik."

#: ../../install_steps.pm_.c:211
#, c-format
msgid "Duplicate mount point %s"
msgstr "Dupliciraj mjesto monitranja %s"

#: ../../install_steps.pm_.c:380
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"Neki važni paketi nisu se instalirali pravilno.\n"
"Ili je vaš cdrom pogon ili cd medij u defektu.\n"
"Provjerite cdrom na instaliranom računalu koristeći \"rpm -qpl Mandrake/RPMS/"
"*.rpm\"\n"

#: ../../install_steps.pm_.c:452
#, c-format
msgid "Welcome to %s"
msgstr "Dobrodošli u %s"

#: ../../install_steps.pm_.c:531 ../../install_steps.pm_.c:772
msgid "No floppy drive available"
msgstr "Disketni pogon nije dostupan"

#: ../../install_steps_auto_install.pm_.c:76
#: ../../install_steps_stdio.pm_.c:22
#, c-format
msgid "Entering step `%s'\n"
msgstr "Pokrećem korak `%s'\n"

#: ../../install_steps_gtk.pm_.c:150
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"Vaš sustav je slab na resursima. Možete imati nekih problem prilikom\n"
"instalacije Mandrake Linux-a. Ukoliko se to desi, možete probati tekstualnu\n"
"instalaciju. Za to, pritisnite `F1' kada podižete CDROM, i unesite `text'."

#: ../../install_steps_gtk.pm_.c:161 ../../install_steps_interactive.pm_.c:231
msgid "Install Class"
msgstr "Instalacijski razred"

#: ../../install_steps_gtk.pm_.c:164
msgid "Please choose one of the following classes of installation:"
msgstr "Molim izaberite jedan od slijedećih razreda instalacije:"

#: ../../install_steps_gtk.pm_.c:237 ../../install_steps_interactive.pm_.c:675
msgid "Package Group Selection"
msgstr "Odabir grupe paketa"

#: ../../install_steps_gtk.pm_.c:270 ../../install_steps_interactive.pm_.c:690
msgid "Individual package selection"
msgstr "Individualan odabir paketa"

#: ../../install_steps_gtk.pm_.c:293 ../../install_steps_interactive.pm_.c:614
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Ukupna veličina: %d / %d MB"

#: ../../install_steps_gtk.pm_.c:335
msgid "Bad package"
msgstr "Loš paket"

#: ../../install_steps_gtk.pm_.c:336
#, c-format
msgid "Name: %s\n"
msgstr "Ime: %s\n"

#: ../../install_steps_gtk.pm_.c:337
#, c-format
msgid "Version: %s\n"
msgstr "Inačica: %s\n"

#: ../../install_steps_gtk.pm_.c:338
#, c-format
msgid "Size: %d KB\n"
msgstr "Veličina: %d KB\n"

#: ../../install_steps_gtk.pm_.c:339
#, c-format
msgid "Importance: %s\n"
msgstr "Značaj: %s\n"

#: ../../install_steps_gtk.pm_.c:361
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr ""
"Ne možete označiti ovaj paket budući da nema dovoljno mjesta gdje ga se može "
"instalirati"

#: ../../install_steps_gtk.pm_.c:366
msgid "The following packages are going to be installed"
msgstr "Slijedeći paketi će biti instalirani"

#: ../../install_steps_gtk.pm_.c:367
msgid "The following packages are going to be removed"
msgstr "Slijedeći paketi će biti uklonjeni"

#: ../../install_steps_gtk.pm_.c:379
msgid "You can't select/unselect this package"
msgstr "Ne možete označiti/odznačiti ovaj paket"

#: ../../install_steps_gtk.pm_.c:391
msgid "This is a mandatory package, it can't be unselected"
msgstr "Budući da je ovo obvezni paket ne možete ga odznačiti"

#: ../../install_steps_gtk.pm_.c:393
msgid "You can't unselect this package. It is already installed"
msgstr "Ne možete odznačiti ovaj paket budući da je već instaliran"

#: ../../install_steps_gtk.pm_.c:396
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Ovaj paket treba nadograditi\n"
"Da li ste sigurni da ga želite odznačiti?"

#: ../../install_steps_gtk.pm_.c:399
msgid "You can't unselect this package. It must be upgraded"
msgstr "Ne možete odznačiti ovaj paket budući da ga treba nadograditi"

#: ../../install_steps_gtk.pm_.c:404
msgid "Show automatically selected packages"
msgstr "Prikaži automatski odabrane pakete"

#: ../../install_steps_gtk.pm_.c:405 ../../install_steps_interactive.pm_.c:255
#: ../../install_steps_interactive.pm_.c:259
#: ../../standalone/drakbackup_.c:4255
msgid "Install"
msgstr "Instaliraj"

#: ../../install_steps_gtk.pm_.c:408
msgid "Load/Save on floppy"
msgstr "Učitaj/Spremi na disketu"

#: ../../install_steps_gtk.pm_.c:409
msgid "Updating package selection"
msgstr "Dograđujem izbor paketa"

#: ../../install_steps_gtk.pm_.c:414
msgid "Minimal install"
msgstr "Minimalna instalacija"

#: ../../install_steps_gtk.pm_.c:429 ../../install_steps_interactive.pm_.c:522
msgid "Choose the packages you want to install"
msgstr "Odaberite pakete koje želite instalirati"

#: ../../install_steps_gtk.pm_.c:445 ../../install_steps_interactive.pm_.c:759
msgid "Installing"
msgstr "Instaliram"

#: ../../install_steps_gtk.pm_.c:451
msgid "Estimating"
msgstr "Procjenjujem"

#: ../../install_steps_gtk.pm_.c:458
msgid "Time remaining "
msgstr "Preostalo vrijeme"

#: ../../install_steps_gtk.pm_.c:470
msgid "Please wait, preparing installation..."
msgstr "Molimo pričekajte, Pripremam instalaciju"

#: ../../install_steps_gtk.pm_.c:554
#, c-format
msgid "%d packages"
msgstr "%d paketa"

#: ../../install_steps_gtk.pm_.c:559
#, c-format
msgid "Installing package %s"
msgstr "Instaliram paket %s"

#: ../../install_steps_gtk.pm_.c:596 ../../install_steps_interactive.pm_.c:189
#: ../../install_steps_interactive.pm_.c:783
#: ../../standalone/drakautoinst_.c:202
msgid "Accept"
msgstr "Prihvati"

#: ../../install_steps_gtk.pm_.c:596 ../../install_steps_interactive.pm_.c:189
#: ../../install_steps_interactive.pm_.c:783
msgid "Refuse"
msgstr "Odbij"

#: ../../install_steps_gtk.pm_.c:597 ../../install_steps_interactive.pm_.c:784
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Promjenite vaš Cd-Rom!\n"
"\n"
"Ubacite Cd-Rom označen \"%s\" u vaš pogon i pritisnite U redu kada "
"završite.\n"
"Ukoliko ga nemate, pritisnite Odustani kako bi izbjegli instalaciju sa ovog "
"Cd-Rom-a."

#: ../../install_steps_gtk.pm_.c:611 ../../install_steps_gtk.pm_.c:615
#: ../../install_steps_interactive.pm_.c:796
#: ../../install_steps_interactive.pm_.c:800
msgid "Go on anyway?"
msgstr "Da ipak nastavim?"

#: ../../install_steps_gtk.pm_.c:611 ../../install_steps_interactive.pm_.c:796
msgid "There was an error ordering packages:"
msgstr "Javila se greška prilikom sortiranja paketa:"

#: ../../install_steps_gtk.pm_.c:615 ../../install_steps_interactive.pm_.c:800
msgid "There was an error installing packages:"
msgstr "Pojavila se greška kod instalacije paketa:"

#: ../../install_steps_interactive.pm_.c:10
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Upozorenje\n"
"\n"
"Molimo pročitajte pažljivo činjenice niže. Ukoliko se ne slažete sa bilo\n"
"kojim dijelom, nemate dozvolu instalirati slijedeći CD medij. Pritisnite "
"'Odbij' \n"
"za nastavak instalacije bez korištenja ovog medija.\n"
"\n"
"\n"
"Neke komponente sadržane u slijedećem CD mediju nisu pokrivene\n"
"GPL licencom ili sličnim ugovorom. Svaka takva komponenta je tada\n"
"pokrivena stavkama i uvjetima svojim vlastitim specifičnim licencama. \n"
"Molimo pročitajte pažljivo i složite se specifičnim licencama prije \n"
"vašeg korištenja ili redistribuiranja navedenih komponenti. \n"
"Takve licence općenito zabranjuju prijenos, dupliciranje \n"
"(osim za spasonosne kopije), redistribuciju, reverzno inženjerstvo, \n"
"disasembliranje, dekompilaciju ili promjenu komponente. \n"
"Svako kršenje ugovora će odmah prekinuti vaša prava kod\n"
"specifične licence. Ako vam stavke specifične licence ne odobre takva\n"
"prava, obično ne možete instalirati programe na više od jednog\n"
"sustava, ili prilagoditi ga za korištenje na mreži. Ako ste u nedoumici,\n"
"kontaktirajte direktno distributera ili urednika komponente. \n"
"Prijenos trećim osobama ili kopiranje takvih komponenti uključujući \n"
"dokumentaciju je obično zabranjeno.\n"
"\n"
"\n"
"Sva prava na komponente slijedećeg CD medija pripadaju njihovim \n"
"uvaženim autorima i zaštićeni su intelektualnim vlasništvom i \n"
"autorskim zakonima primjenjivim na software-ske programe.\n"

#: ../../install_steps_interactive.pm_.c:67
msgid "An error occurred"
msgstr "Pojavila se greška"

#: ../../install_steps_interactive.pm_.c:85
msgid "Do you really want to leave the installation?"
msgstr "Da li zaista želite napustiti instalaciju?"

#: ../../install_steps_interactive.pm_.c:112
msgid "License agreement"
msgstr "Licencni dogovor"

#: ../../install_steps_interactive.pm_.c:113
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurance of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"Uvod\n"
"\n"
"Operativni sustav i njegove različite komponente raspoložive u Mandrake "
"Linux distribuciji \n"
"će se zvati \"Software-ski Produkti\" daljnje u tekstu. Software-ski "
"Produkti  uključuju, ali nisu \n"
"ograničeni na, skup programa, metoda, zakona i dokumentacija vezanih uz "
"operativni\n"
"sustav i različite komponente Mandrake Linux distribucije.\n"
"\n"
"\n"
"1. Licencni Dogovor\n"
"\n"
"Molimo pažljivo pročitajte ovaj dokument. Ovaj dokument je licenci dogovor "
"između vas i \n"
"MandrakeSoft S.A. koji se primjenjuje na Software-ske produkte.\n"
"Instaliranjem, dupliciranjem ili korištenjem Software-skih Produkata u bilo "
"kojem obliku,eksplicitno \n"
"prihvaćate i potpuno se slažete da ćete prihvatiti stavke i uvjete ove "
"Licence. \n"
"Ukoliko se ne slažete sa bilo kojim dijelom licence, nije vam dozvoljeno "
"instalirati, duplicirati ili koristiti \n"
"Software-ski produkt. \n"
"Svaki pokušaj instalacije, dupliciranja ili korištenja Software-skog "
"Produkta u obliku kojem ne priliči \n"
"sa stavkama i uvjetima ove licence je prazno i uništiti će vaša prava pod "
"ovom\n"
"Licencom. Uslijed uništenja licence, morate odmah unišititi sve kopije \n"
"Software-skog Produkta.\n"
"\n"
"\n"
"2. Ograničeno Jamstvo\n"
"\n"
"Software-ski Produkt i pripadajuća dokumentacija je pružena \"kako je\", bez "
"jamstva, do \n"
"mjere dozvoljene zakonom.\n"
"MandrakeSoft S.A. neće, u bilo kojim slučajevima i do te mjere dozvoljene "
"zakonom, biti odgovaran za bilo kakvu specijalnu,\n"
"nesretnu, direktnu ili indirektnu štetu bilo kakvu (uključujući granice "
"štete od gubitka\n"
"posla, prestanka posla, financijskih gubitaka, legalnih plaćanja i kazni "
"posljedica sudskih \n"
"presuda, ili bilo kakvih drugih posljedica gubitka) što je posljedica "
"korištenja ili nemogućnosti korištenja Software-skog \n"
"Produkta, iako je MandrakeSoft S.A. bio upozoren od mogućnosti takve \n"
"štete.\n"
"\n"
"OGRANIČENA ODGOVORNOST POVEZANA SA POSJEDOVANJEM ILI KORIŠTENJEM ZABRANJENOG "
"SOFTWARE-A U NEKIM ZEMLJAMA\n"
"\n"
"Do granice dozvoljene zakonom, MandrakeSoft S.A. ili njegovi distributori "
"neće, u bilo kakvim slučajevima, biti \n"
"odgovaran za bilo kakvu specijalnu, nesretnu, direktnu ili indirektnu štetu "
"bilo kako (uključujući \n"
"ograničene štete zbog gubitka posla, prekida posla, financijskog gubitka, "
"legalnih plaćanja \n"
"i kazni posljedica sudskih presuda, ili bilo kakvih drugih "
"posljedicagubitka) što je posljedica \n"
"posjedovanja ili korištenja software-skih komponenti ili kao posljedica "
"skidanja (download-a) software-skih komponenti \n"
"sa jednog od Mandrake Linux site-ova koja su zabranjena ili ograničena u "
"nekim zemljama po lokalnim zakonima.\n"
"Ova ograničena odgovornost se primjenjuje na, ali nije ograničena, jake "
"kriptografske komponente \n"
"uključene u Software-ski Produkt.\n"
"\n"
"\n"
"3. GPL Licenca i slične licence\n"
"\n"
"Software-ski Prodkt se sastoji od komponenti napravljenih od raznih ljudi "
"ili entiteta.  Veliki \n"
"broj tih komponenti je pokriveno pod stavkama i uvjetima GNU Opće Javne \n"
"Licence, u daljnjem tekstu zvana \"GPL\", ili  sličnih licenci. Veliki broj "
"tih licenci dozvoljava vam korištenje, \n"
"dupliciranje, prilagođavanje ili redistribuciju komponenti koju ona pokriva. "
"Molimo pročitajte pažljivo stavke \n"
"i uvjete licencnog dogovora svake komponente prije korištenja bilo koje "
"komponente. Bilo koje pitanje \n"
"o licenci komponente trebao bi biti adresiran autoru komponente a ne "
"MandrakeSoft-u.\n"
"Programe razvijeni od strane MandrakeSoft S.A. su pokriveni GPL licencom. "
"Dokumentacija napisana \n"
"od strane MandrakeSoft S.A. je pokrivena specifičnom licencom. Molimo "
"pogledajte dokumentaciju za \n"
"više detalja.\n"
"\n"
"\n"
"4. Prava na intelektualno vlasništvo\n"
"\n"
"Sva prava komponenti Software-skog Produkta pripada njihovim uvaženim "
"autorima i \n"
"zaštićeni su intelektualnim vlasništvom i autorskim zakonima primjenjivim na "
"software-ske programe.\n"
"MandrakeSoft S.A. zadržava svoje pravo za izmjenu ili prilagođavanje "
"Software-skog Produkta, kao cijelinu ili u\n"
"dijelovima, u svim slučajevima za sve namjene.\n"
"\"Mandrake\", \"Mandrake Linux\" i pripadajući logoi su zaštićeni prodajni "
"znaci MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Državni zakoni \n"
"\n"
"Ukoliko neki dio ovog dogovora govori ništa, ilegalan ili neprikladan "
"sudstvu, taj \n"
"dio može se isključiti iz ovog ugovora. Ali ostajete obveznu drugim "
"primjenjivim sekcijama\n"
"ugovora.\n"
"Za stavke i uvjete ove Licence je nadležan zakon Francuske.\n"
"Sve sporove oko stavaka licence će preferirano biti uređeno sudom. Kao "
"zadnji \n"
"izlaz, spor će biti predan odgovarajućem Sudu u Parizu - Francuska.\n"
"Za bilo kakva pitanja o ovom dokumentu, molimo kontaktirajte MandrakeSoft S."
"A.  \n"

#: ../../install_steps_interactive.pm_.c:191
msgid "Are you sure you refuse the licence?"
msgstr ""

#: ../../install_steps_interactive.pm_.c:211
#: ../../install_steps_interactive.pm_.c:1020
#: ../../standalone/keyboarddrake_.c:31
msgid "Keyboard"
msgstr "Tipkovnica"

#: ../../install_steps_interactive.pm_.c:212
msgid "Please choose your keyboard layout."
msgstr "Molim, izaberite raspored tipkovnice."

#: ../../install_steps_interactive.pm_.c:213
msgid "Here is the full list of keyboards available"
msgstr "Ovdje je cijeli popis raspoloživih tipkovnica"

#: ../../install_steps_interactive.pm_.c:231
msgid "Which installation class do you want?"
msgstr "Koji instalacijski razred želite?"

#: ../../install_steps_interactive.pm_.c:235
msgid "Install/Update"
msgstr "Instaliraj/Nadogradi"

#: ../../install_steps_interactive.pm_.c:235
msgid "Is this an install or an update?"
msgstr "Da li je ovo instalacija ili nadogradnja?"

#: ../../install_steps_interactive.pm_.c:244
msgid "Recommended"
msgstr "Preporučeno"

#: ../../install_steps_interactive.pm_.c:247
#: ../../install_steps_interactive.pm_.c:250
msgid "Expert"
msgstr "Ekspert"

#: ../../install_steps_interactive.pm_.c:255
#: ../../install_steps_interactive.pm_.c:259
msgid "Upgrade"
msgstr "Dogradnja"

#: ../../install_steps_interactive.pm_.c:255
#: ../../install_steps_interactive.pm_.c:259
msgid "Upgrade packages only"
msgstr "Samo dogradi pakete"

#: ../../install_steps_interactive.pm_.c:275
msgid "Please choose the type of your mouse."
msgstr "Molim izaberite vašu vrstu miša."

#: ../../install_steps_interactive.pm_.c:281 ../../standalone/mousedrake_.c:60
msgid "Mouse Port"
msgstr "Port miša"

#: ../../install_steps_interactive.pm_.c:282 ../../standalone/mousedrake_.c:61
msgid "Please choose on which serial port your mouse is connected to."
msgstr "Izaberite na kojem serijskom portu je miš priključen."

#: ../../install_steps_interactive.pm_.c:290
msgid "Buttons emulation"
msgstr "Emulacija gumbova"

#: ../../install_steps_interactive.pm_.c:292
msgid "Button 2 Emulation"
msgstr "Emulacija 2 gumba"

#: ../../install_steps_interactive.pm_.c:293
msgid "Button 3 Emulation"
msgstr "Emulacija 3 gumba"

#: ../../install_steps_interactive.pm_.c:314
msgid "Configuring PCMCIA cards..."
msgstr "Podešavam PCMCIA kartice..."

#: ../../install_steps_interactive.pm_.c:314
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../install_steps_interactive.pm_.c:321
msgid "Configuring IDE"
msgstr "Podešavam IDE"

#: ../../install_steps_interactive.pm_.c:321
msgid "IDE"
msgstr "IDE"

#: ../../install_steps_interactive.pm_.c:338
msgid "No partition available"
msgstr "nema dostupnih particija"

#: ../../install_steps_interactive.pm_.c:341
msgid "Scanning partitions to find mount points"
msgstr "Tražim particije kako bi pronašao mjesta montiranja"

#: ../../install_steps_interactive.pm_.c:349
msgid "Choose the mount points"
msgstr "Odaberite mjesta montiranja"

#: ../../install_steps_interactive.pm_.c:379
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"Nema slobodnog mjesta za 1 MB bootstrap! Instalacija će nastaviti, ali za "
"podizanje vašeg sustava, trebati ćete napraviti bootstrap particiju u "
"DiskDrake-u"

#: ../../install_steps_interactive.pm_.c:388
msgid "No root partition found to perform an upgrade"
msgstr "Niti jedna root particija nije pronađena da se obavi dogradnja"

#: ../../install_steps_interactive.pm_.c:389
msgid "Root Partition"
msgstr "Korijenska particija"

#: ../../install_steps_interactive.pm_.c:390
msgid "What is the root partition (/) of your system?"
msgstr "Koja je korijenska particija  (/) vašeg sustava?"

#: ../../install_steps_interactive.pm_.c:404
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Morate ponovo pokrenuti sustav kako bi se aktivirala promjena particijske "
"tablice"

#: ../../install_steps_interactive.pm_.c:428
msgid "Choose the partitions you want to format"
msgstr "Izaberite particije koje želite formatirati"

#: ../../install_steps_interactive.pm_.c:429
msgid "Check bad blocks?"
msgstr "Provjeri za loše blokove?"

#: ../../install_steps_interactive.pm_.c:456
msgid "Formatting partitions"
msgstr "Formatiram particije"

#: ../../install_steps_interactive.pm_.c:458
#, c-format
msgid "Creating and formatting file %s"
msgstr "Stvaram i formatiram datoteku %s"

#: ../../install_steps_interactive.pm_.c:463
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can loose data)"
msgstr ""

#: ../../install_steps_interactive.pm_.c:465
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "Nema dovoljno swapa za završetak instalacije, molim dodajte još"

#: ../../install_steps_interactive.pm_.c:472
#, fuzzy
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "Tražim dostupne pakete"

#: ../../install_steps_interactive.pm_.c:473
msgid "Looking for available packages..."
msgstr "Tražim dostupne pakete"

#: ../../install_steps_interactive.pm_.c:476
#, fuzzy
msgid "Looking at packages already installed..."
msgstr "Ne možete odznačiti ovaj paket budući da je već instaliran"

#: ../../install_steps_interactive.pm_.c:480
msgid "Finding packages to upgrade..."
msgstr "Tražim pakete koje mogu nadograditi"

#: ../../install_steps_interactive.pm_.c:498
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
"Vaš sustav nema dovoljno prostora za instalaciju ili dogradnju (%d > %d)"

#: ../../install_steps_interactive.pm_.c:534
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
"Molimo izaberite učitivanje ili spremanje izbora paketa na disketu.\n"
"Format je isto kao auto_install napravljene diskete."

#: ../../install_steps_interactive.pm_.c:536
msgid "Load from floppy"
msgstr "Učitaj sa diskete"

#: ../../install_steps_interactive.pm_.c:536
msgid "Save on floppy"
msgstr "Spremi na disketu"

#: ../../install_steps_interactive.pm_.c:540
msgid "Loading from floppy"
msgstr "Učitavam sa diskete"

#: ../../install_steps_interactive.pm_.c:540
msgid "Package selection"
msgstr "Odabir paketa"

#: ../../install_steps_interactive.pm_.c:545
msgid "Insert a floppy containing package selection"
msgstr "Umetnite disketu koja sadržava izbor paketa"

#: ../../install_steps_interactive.pm_.c:627
msgid "Selected size is larger than available space"
msgstr "Izabrana veličina je veća nego raspoloživ prostor"

#: ../../install_steps_interactive.pm_.c:641
msgid "Type of install"
msgstr "Tip instalacije"

#: ../../install_steps_interactive.pm_.c:642
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"Niste izabrali niti jednu grupu paketa\n"
"Izaberite minimalnu instalaciju ako želite"

#: ../../install_steps_interactive.pm_.c:645
msgid "With X"
msgstr "Sa X-ima"

#: ../../install_steps_interactive.pm_.c:647
msgid "With basic documentation (recommended!)"
msgstr "Sa osnovnom dokumentacijom (preporučeno!)"

#: ../../install_steps_interactive.pm_.c:648
msgid "Truly minimal install (especially no urpmi)"
msgstr "Stvarno malena instalacija (posebice bez urpmia)"

#: ../../install_steps_interactive.pm_.c:733
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Ako imate sve dolje navedene CDove kliknite U redu.\n"
"Ako nemate niti jedan od navedenih CD kliknite Odustani.\n"
"Ako imate samo neke od dolje navedenih CDa odznačite one koje nemate i "
"kliknite U redu."

#: ../../install_steps_interactive.pm_.c:738
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cd-Rom naslovljen \"%s\""

#: ../../install_steps_interactive.pm_.c:759
msgid "Preparing installation"
msgstr "Pripremam instalaciju"

#: ../../install_steps_interactive.pm_.c:768
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Instaliram paket %s\n"
"%d%%"

#: ../../install_steps_interactive.pm_.c:814
msgid "Post-install configuration"
msgstr "Postava nakon instalacije"

#: ../../install_steps_interactive.pm_.c:820
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "Molim, umetnite Boot disketu u pogon %s"

#: ../../install_steps_interactive.pm_.c:826
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "Molim, umetnite Update Modules disketu u pogon %s"

#: ../../install_steps_interactive.pm_.c:846
msgid ""
"You now have the opportunity to download encryption software.\n"
"\n"
"WARNING:\n"
"\n"
"Due to different general requirements applicable to these software and "
"imposed\n"
"by various jurisdictions, customer and/or end user of theses software "
"should\n"
"ensure that the laws of his/their jurisdiction allow him/them to download, "
"stock\n"
"and/or use these software.\n"
"\n"
"In addition customer and/or end user shall particularly be aware to not "
"infringe\n"
"the laws of his/their jurisdiction. Should customer and/or end user not\n"
"respect the provision of these applicable laws, he/they will incure serious\n"
"sanctions.\n"
"\n"
"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
"liable\n"
"for special, indirect or incidental damages whatsoever (including, but not\n"
"limited to loss of profits, business interruption, loss of commercial data "
"and\n"
"other pecuniary losses, and eventual liabilities and indemnification to be "
"paid\n"
"pursuant to a court decision) arising out of use, possession, or the sole\n"
"downloading of these software, to which customer and/or end user could\n"
"eventually have access after having sign up the present agreement.\n"
"\n"
"\n"
"For any queries relating to these agreement, please contact \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"
msgstr ""
"Sada imate mogućnost za skidanje software-a za enkripciju.\n"
"\n"
"UPOZORENJE:\n"
"\n"
"Zbog različitih općih zahtjeva primjenjivih na ovaj software i presuda\n"
"raznih sudova, kupac i/ili krajnji korisnik ovog software-a treba se\n"
"uvjeriti da zakoni njegovog/e sudstva dozvoljava mu/joj da skine, spremi\n"
"i/ili koristi ovaj software.\n"
"\n"
"U dodatku kupac i/ili krajnji korisnik mora dijelom biti svjestan da ne "
"prekrši\n"
"zakon svoga sudstva. Ukoliko kupac i/ili krajnji korisnik ne \n"
"poštuje stavke tih primjenjivih zakona, može ga dovesti do ozbiljnih\n"
"sankcija.\n"
"\n"
"U bilo kojem slučaju Mandrakesoft ili njegovi proizvođači i/ili nabavljačine "
"mogu biti odgovorni\n"
"za specijalne, indirektne ili slučajne štete bilo kako (uključujući, ali ne\n"
"ograničana na gubitak profita, prekid posla, gubitak komercijalnih podataka\n"
"i\n"
"drugih novčanih gubitaka, i eventualne odgovornosti i isplate naknade što "
"treba biti plaćeno\n"
"odlukom suda) što je posljedica korištenja, posjedovanja ili samog\n"
"skidanja ovog software-a, kojemu će kupac i/ili krajnji korisnik može\n"
"eventualno imati pristup poslije potpisivanja postojećeg ugovora/dogovora.\n"
"\n"
"\n"
"Za bilo kakve upite u svezi ovog ugovora, molimo kontaktirajte \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"

#: ../../install_steps_interactive.pm_.c:885
#, fuzzy
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been released after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""
"Imate mogućnost skidanja (downloada) paketa za dogradnju koji su\n"
"izašli poslije nego što je distribucija postala raspoloživa.\n"
"\n"
"Dobit ćete sigurnosne popravke i popravke od grešaka, ali za nastavak\n"
"trebate imati podešenu Internet vezu.\n"
"\n"
"Da li želite instalirati dogradnju?"

#: ../../install_steps_interactive.pm_.c:900
msgid ""
"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
"Kontaktiram Mandrake Linux web site za dobivanje popisa raspoloživih mirrora"

#: ../../install_steps_interactive.pm_.c:905
msgid "Choose a mirror from which to get the packages"
msgstr "Izaberite mirror sa kojeg želite skinuti pakete"

#: ../../install_steps_interactive.pm_.c:914
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Spajam se na mirror kako bih pribavio popis dostupnih paketa"

#: ../../install_steps_interactive.pm_.c:942
msgid "Which is your timezone?"
msgstr "Koja je vaša vremenska zona?"

#: ../../install_steps_interactive.pm_.c:947
msgid "Hardware clock set to GMT"
msgstr "Vaš hardverski sat namješten je na GMT"

#: ../../install_steps_interactive.pm_.c:948
msgid "Automatic time synchronization (using NTP)"
msgstr "Automatska vremenska sinkronizacija (koristeći NTP)"

#: ../../install_steps_interactive.pm_.c:955
msgid "NTP Server"
msgstr "NTP Poslužitelj"

#: ../../install_steps_interactive.pm_.c:989
#: ../../install_steps_interactive.pm_.c:997
msgid "Remote CUPS server"
msgstr "Udaljeni CUPS poslužitelj"

#: ../../install_steps_interactive.pm_.c:990
msgid "No printer"
msgstr "Nema pisača"

#: ../../install_steps_interactive.pm_.c:1007
msgid "Do you have an ISA sound card?"
msgstr "Da li imate ISA zvučnu karticu?"

#: ../../install_steps_interactive.pm_.c:1009
msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
"Pokrenite \"sndconfig\" poslije instalacije za podešavanje vaše zvučne "
"kartice"

#: ../../install_steps_interactive.pm_.c:1011
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
"Nije pronađena zvučna kartica. Probajte \"harddrake\" poslije instalacije"

#: ../../install_steps_interactive.pm_.c:1016 ../../steps.pm_.c:27
msgid "Summary"
msgstr "Sumarno"

#: ../../install_steps_interactive.pm_.c:1019
msgid "Mouse"
msgstr "Miš"

#: ../../install_steps_interactive.pm_.c:1021
msgid "Timezone"
msgstr "Vremenska zona"

#: ../../install_steps_interactive.pm_.c:1022 ../../printerdrake.pm_.c:2937
#: ../../printerdrake.pm_.c:3026
msgid "Printer"
msgstr "Pisac"

#: ../../install_steps_interactive.pm_.c:1024
msgid "ISDN card"
msgstr "ISDN kartica"

#: ../../install_steps_interactive.pm_.c:1027
#: ../../install_steps_interactive.pm_.c:1029
msgid "Sound card"
msgstr "Zvučna kartica"

#: ../../install_steps_interactive.pm_.c:1031
msgid "TV card"
msgstr "TV kartica"

#: ../../install_steps_interactive.pm_.c:1071
#: ../../install_steps_interactive.pm_.c:1096
#: ../../install_steps_interactive.pm_.c:1100
msgid "LDAP"
msgstr "LDAP"

#: ../../install_steps_interactive.pm_.c:1072
#: ../../install_steps_interactive.pm_.c:1096
#: ../../install_steps_interactive.pm_.c:1109
msgid "NIS"
msgstr "NIS"

#: ../../install_steps_interactive.pm_.c:1073
#: ../../install_steps_interactive.pm_.c:1096
#: ../../install_steps_interactive.pm_.c:1117
#: ../../install_steps_interactive.pm_.c:1123
#, fuzzy
msgid "Windows Domain"
msgstr "Dobavi Windows fontove"

#: ../../install_steps_interactive.pm_.c:1074
#: ../../install_steps_interactive.pm_.c:1096
msgid "Local files"
msgstr "Lokalne datoteke"

#: ../../install_steps_interactive.pm_.c:1083
#: ../../install_steps_interactive.pm_.c:1084 ../../steps.pm_.c:24
msgid "Set root password"
msgstr "Podešavanje root lozinke"

#: ../../install_steps_interactive.pm_.c:1085
msgid "No password"
msgstr "Bez lozinke"

#: ../../install_steps_interactive.pm_.c:1090
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
"Ova lozinka je prejednostavna (lozinka mora sadržavati barem %d znakova)"

#: ../../install_steps_interactive.pm_.c:1096 ../../network/modem.pm_.c:49
#: ../../standalone/drakconnect_.c:625 ../../standalone/logdrake_.c:172
msgid "Authentication"
msgstr "Provjera autentičnosti"

#: ../../install_steps_interactive.pm_.c:1104
msgid "Authentication LDAP"
msgstr "LDAP Autentifikacija"

#: ../../install_steps_interactive.pm_.c:1105
msgid "LDAP Base dn"
msgstr "LDAP Base dn"

#: ../../install_steps_interactive.pm_.c:1106
msgid "LDAP Server"
msgstr "LDAP Poslužitelj"

#: ../../install_steps_interactive.pm_.c:1112
msgid "Authentication NIS"
msgstr "NIS Autentifikacija"

#: ../../install_steps_interactive.pm_.c:1113
msgid "NIS Domain"
msgstr "NIS domena"

#: ../../install_steps_interactive.pm_.c:1114
msgid "NIS Server"
msgstr "NIS Poslužitelj"

#: ../../install_steps_interactive.pm_.c:1120
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""

#: ../../install_steps_interactive.pm_.c:1122
#, fuzzy
msgid "Authentication Windows Domain"
msgstr "LDAP Autentifikacija"

#: ../../install_steps_interactive.pm_.c:1124
#, fuzzy
msgid "Domain Admin User Name"
msgstr "Ime domene"

#: ../../install_steps_interactive.pm_.c:1125
msgid "Domain Admin Password"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1160
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"Proizvoljna boot disketa omogućava način podizanja vašeg Linux sustava bez\n"
"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne želite "
"instalirati\n"
"SILO na vaš sustav, ili je drugi operativni sustav uklonio SILO, ili SILO "
"ne\n"
"želi raditi sa vašom konfiguracijom hardware-a. Proizvoljna boot disketa "
"također može biti korištena sa\n"
"Mandrake spasonosnom slikom, omogućavajući tako lakše spašavanje od raznih "
"sustavskih\n"
"grešaka.\n"
"\n"
"Ako želite napraviti boot disketu za vaš sustav, ubacite disketu u prvi\n"
" pogon i pritisnite \"U redu\"."

#: ../../install_steps_interactive.pm_.c:1176
msgid "First floppy drive"
msgstr "Prvi disketni pogon"

#: ../../install_steps_interactive.pm_.c:1177
msgid "Second floppy drive"
msgstr "Drugi disketni pogon"

#: ../../install_steps_interactive.pm_.c:1178 ../../printerdrake.pm_.c:2470
msgid "Skip"
msgstr "Preskoči"

#: ../../install_steps_interactive.pm_.c:1183
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?\n"
"%s"
msgstr ""
"Proizvoljna boot disketa omogućava način podizanja vašeg Linux sustava bez\n"
"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne želite "
"instalirati\n"
"LILO (ili grub) na vaš sustav, ili je drugi operativni sustav uklonio LILO, "
"ili LILO ne\n"
"želi raditi sa vašom konfiguracijom hardware-a. Proizvoljna boot disketa "
"također može biti korištena sa\n"
"Mandrake spasonosnom slikom, omogućavajući tako lakše spašavanje od raznih\n"
" sustavskih grešaka.\n"
"Da li želite napraviti proizvoljnu boot disketu za vaš sustav?\n"
"%s"

#: ../../install_steps_interactive.pm_.c:1189
msgid ""
"\n"
"\n"
"(WARNING! You're using XFS for your root partition,\n"
"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
"because XFS needs a very large driver)."
msgstr ""
"\n"
"\n"
"(UPOZORENJE! Koristite XFS za vašu root particiju,\n"
"stvaranje boot diskete na disketi kapaciteta 1.44 Mb vjerojatno\n"
"neće uspjeti, jer XFS treba vrlo velik pokretački program)."

#: ../../install_steps_interactive.pm_.c:1197
msgid "Sorry, no floppy drive available"
msgstr "Žalim, međutim disketni pogon nije dostupan"

#: ../../install_steps_interactive.pm_.c:1201
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "Izaberite disketni pogon koji želite koristiti za izradu boot diskete"

#: ../../install_steps_interactive.pm_.c:1205
#, c-format
msgid "Insert a floppy in %s"
msgstr "Umetnite disketu u pogon %s"

#: ../../install_steps_interactive.pm_.c:1208
msgid "Creating bootdisk..."
msgstr "Stvaram boot disketu"

#: ../../install_steps_interactive.pm_.c:1215
msgid "Preparing bootloader..."
msgstr "Pripremam bootloader"

#: ../../install_steps_interactive.pm_.c:1226
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX to boot your machine"
msgstr ""
"Čini se da imate OldWorld ili Nepoznato\n"
" računalo, yaboot bootloader neće moći raditi kod vas.\n"
"Instalacija će nastaviti, ali ćete morati\n"
" koristiti BootX da podignete vaše računalo"

#: ../../install_steps_interactive.pm_.c:1232
msgid "Do you want to use aboot?"
msgstr "Da li želite koristiti aboot?"

#: ../../install_steps_interactive.pm_.c:1235
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Greška prilikom instalacije aboot-a, \n"
"probati nasilno instalirati iako to može uništiti prvu particiju?"

#: ../../install_steps_interactive.pm_.c:1242
msgid "Installing bootloader"
msgstr "Instaliranje bootloadera"

#: ../../install_steps_interactive.pm_.c:1248
msgid "Installation of bootloader failed. The following error occured:"
msgstr ""
"Instalacija bootloader-a nije uspjela. Prijavljena je slijedeća grešska:"

#: ../../install_steps_interactive.pm_.c:1256
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Trebati ćete promjeniti vaš Otvoreni Firmware boot-uređaj kako bi\n"
" omogućili bootloader. Ukoliko ne želite vidjeti bootloader prompt pri\n"
" podizanju, pritisnite Command-Option-O-F pri podizanju i unesite:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Tada napišite: shut-down\n"
"Pri slijedećem podizanju trebali biste vidjeti prompt bootloadera."

#: ../../install_steps_interactive.pm_.c:1290
#: ../../standalone/drakautoinst_.c:79
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Umetnite praznu disketu u pogon %s"

#: ../../install_steps_interactive.pm_.c:1294
msgid "Creating auto install floppy..."
msgstr "Pravim auto instalacijsku disketu"

#: ../../install_steps_interactive.pm_.c:1305
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Niste završili sve korake.\n"
"\n"
"Želite li zaista završiti?"

#: ../../install_steps_interactive.pm_.c:1316
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"Čestitam, instalacija je kompletna.\n"
"Uklonite boot medij i pritisnite return za ponovno podizanje.\n"
"\n"
"\n"
"Za informacije o popravcima koji su raspoloživi za ovo izdanje Mandrake "
"Linux-a,\n"
"konzultirajte Eratu raspoloživu na\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Informacije o konfiguriranju vašeg sustava je raspoloživo u poslije\n"
"instalacijskom poglavlju od Official Mandrake Linux User's Guide."

#: ../../install_steps_interactive.pm_.c:1329
#, fuzzy
msgid "http://www.mandrakelinux.com/en/90errata.php3"
msgstr "http://www.mandrakesoft.com/sales/contact"

#: ../../install_steps_interactive.pm_.c:1334
msgid "Generate auto install floppy"
msgstr "Napravi auto instalacijsku disketu"

#: ../../install_steps_interactive.pm_.c:1336
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"Auto instalacija može biti potpuno automatska ukoliko želite,\n"
"u tom slučaju će preuzeti hard disk!!\n"
"(ovo znači za instalaciju na drugo računalo).\n"
"\n"
"Možete preferirati da ponovite instalaciju.\n"

#: ../../install_steps_interactive.pm_.c:1341
msgid "Automated"
msgstr "Automatski"

#: ../../install_steps_interactive.pm_.c:1341
msgid "Replay"
msgstr "Ponovno prikaži"

#: ../../install_steps_interactive.pm_.c:1344
msgid "Save packages selection"
msgstr "Spremi odabir paketa"

#: ../../install_steps_newt.pm_.c:22
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "Mandrake Linux instalacija %s"

#. -PO This string must fit in a 80-char wide text screen
#: ../../install_steps_newt.pm_.c:35
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> između elemenata  | <Space> bira | <F12> slijedeći zaslon"

#: ../../interactive.pm_.c:87
msgid "kdesu missing"
msgstr "kdesu nedostaje"

#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
msgid "consolehelper missing"
msgstr "nedostaje consolehelper"

#: ../../interactive.pm_.c:152
msgid "Choose a file"
msgstr "Izaberite datoteku"

#: ../../interactive.pm_.c:320
msgid "Advanced"
msgstr "Napredno"

#: ../../interactive.pm_.c:321
msgid "Basic"
msgstr "Osnovno"

#: ../../interactive/newt.pm_.c:174 ../../my_gtk.pm_.c:158
#: ../../printerdrake.pm_.c:2124
msgid "<- Previous"
msgstr "<- Prijašnje"

#: ../../interactive/newt.pm_.c:174 ../../interactive/newt.pm_.c:176
#: ../../standalone/drakbackup_.c:4110 ../../standalone/drakbackup_.c:4137
#: ../../standalone/drakbackup_.c:4167 ../../standalone/drakbackup_.c:4193
msgid "Next"
msgstr "Slijedeće"

#: ../../interactive/stdio.pm_.c:29 ../../interactive/stdio.pm_.c:149
msgid "Bad choice, try again\n"
msgstr "Krivi izbor, pokušajte ponovo\n"

#: ../../interactive/stdio.pm_.c:30 ../../interactive/stdio.pm_.c:150
#, c-format
msgid "Your choice? (default %s) "
msgstr "Vaš izbor? (uobičajeno %s) "

#: ../../interactive/stdio.pm_.c:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"Unosi koje trebate popuniti:\n"
"%s"

#: ../../interactive/stdio.pm_.c:70
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Vaš izbor? (0/1, uobičajeno '%s') "

#: ../../interactive/stdio.pm_.c:95
#, c-format
msgid "Button `%s': %s"
msgstr "Gumb `%s': %s"

#: ../../interactive/stdio.pm_.c:96
msgid "Do you want to click on this button?"
msgstr "Da li želite kliknuti na ovaj gumb? "

#: ../../interactive/stdio.pm_.c:105
msgid " enter `void' for void entry"
msgstr ""

#: ../../interactive/stdio.pm_.c:105
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "Vaš izbor? (uobičajeno `%s'%s) "

#: ../../interactive/stdio.pm_.c:123
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> Postoji mnogo stvari za odabir iz (%s).\n"

#: ../../interactive/stdio.pm_.c:126
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"Molim, izaberite prvi broj do 10 kojeg želite urediti,\n"
"ili samo pritisnite Enter za nastavak.\n"
"Vaš izbor? "

#: ../../interactive/stdio.pm_.c:139
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> Obavijest, naziv promijenjen:\n"
"%s"

#: ../../interactive/stdio.pm_.c:146
msgid "Re-submit"
msgstr "Ponovno Pošalji"

#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:187
msgid "Czech (QWERTZ)"
msgstr "Češka (QWERTZ)"

#: ../../keyboard.pm_.c:153 ../../keyboard.pm_.c:189
msgid "German"
msgstr "Njemačka"

#: ../../keyboard.pm_.c:154
msgid "Dvorak"
msgstr "Dvorak"

#: ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:197
msgid "Spanish"
msgstr "Španjolska"

#: ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:198
msgid "Finnish"
msgstr "Finska"

#: ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:199
msgid "French"
msgstr "Francuska"

#: ../../keyboard.pm_.c:158 ../../keyboard.pm_.c:231
msgid "Norwegian"
msgstr "Norveška"

#: ../../keyboard.pm_.c:159
msgid "Polish"
msgstr "Poljska"

#: ../../keyboard.pm_.c:160 ../../keyboard.pm_.c:239
msgid "Russian"
msgstr "Ruska"

#: ../../keyboard.pm_.c:162 ../../keyboard.pm_.c:241
msgid "Swedish"
msgstr "Švedska"

#: ../../keyboard.pm_.c:163 ../../keyboard.pm_.c:257
msgid "UK keyboard"
msgstr "UK tipkovnica"

#: ../../keyboard.pm_.c:164 ../../keyboard.pm_.c:258
msgid "US keyboard"
msgstr "US tipkovnica"

#: ../../keyboard.pm_.c:166
msgid "Albanian"
msgstr "Albanska"

#: ../../keyboard.pm_.c:167
msgid "Armenian (old)"
msgstr "Armenska (stara)"

#: ../../keyboard.pm_.c:168
msgid "Armenian (typewriter)"
msgstr "Armenska (pisaća mašina)"

#: ../../keyboard.pm_.c:169
msgid "Armenian (phonetic)"
msgstr "Armenska (fonetska)"

#: ../../keyboard.pm_.c:174
msgid "Azerbaidjani (latin)"
msgstr "Azerbejdžanska (latinica)"

#: ../../keyboard.pm_.c:176
msgid "Belgian"
msgstr "Belgijska"

#: ../../keyboard.pm_.c:177
#, fuzzy
msgid "Bengali"
msgstr "omogući"

#: ../../keyboard.pm_.c:178
msgid "Bulgarian (phonetic)"
msgstr "Bugarska (fonetska)"

#: ../../keyboard.pm_.c:179
msgid "Bulgarian (BDS)"
msgstr "Bugarska (BDS)"

#: ../../keyboard.pm_.c:180
msgid "Brazilian (ABNT-2)"
msgstr "Brazilska (ABNT-2)"

#: ../../keyboard.pm_.c:183
#, fuzzy
msgid "Bosnian"
msgstr "Estonska"

#: ../../keyboard.pm_.c:184
msgid "Belarusian"
msgstr "Bjeloruska"

#: ../../keyboard.pm_.c:185
msgid "Swiss (German layout)"
msgstr "Švicarska (Njemački raspored)"

#: ../../keyboard.pm_.c:186
msgid "Swiss (French layout)"
msgstr "Švicarska (francuski raspored)"

#: ../../keyboard.pm_.c:188
msgid "Czech (QWERTY)"
msgstr "Češka (QWERTY)"

#: ../../keyboard.pm_.c:190
msgid "German (no dead keys)"
msgstr "Njemačka (bez mrtvih tipaka)"

#: ../../keyboard.pm_.c:191
msgid "Devanagari"
msgstr ""

#: ../../keyboard.pm_.c:192
msgid "Danish"
msgstr "Danska"

#: ../../keyboard.pm_.c:193
msgid "Dvorak (US)"
msgstr "Dvorak (USA)"

#: ../../keyboard.pm_.c:194
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (Norveška)"

#: ../../keyboard.pm_.c:195
msgid "Dvorak (Swedish)"
msgstr "Dvorak (Švedska)"

#: ../../keyboard.pm_.c:196
msgid "Estonian"
msgstr "Estonska"

#: ../../keyboard.pm_.c:200
msgid "Georgian (\"Russian\" layout)"
msgstr "Gruzijska  (\"Ruski\" raspored)"

#: ../../keyboard.pm_.c:201
msgid "Georgian (\"Latin\" layout)"
msgstr "Gruzijska  (\"Latin\" raspored)"

#: ../../keyboard.pm_.c:202
msgid "Greek"
msgstr "Grčka"

#: ../../keyboard.pm_.c:203
msgid "Gujarati"
msgstr ""

#: ../../keyboard.pm_.c:204
msgid "Gurmukhi"
msgstr ""

#: ../../keyboard.pm_.c:205
msgid "Hungarian"
msgstr "Mađarska"

#: ../../keyboard.pm_.c:206
msgid "Croatian"
msgstr "Hrvatska"

#: ../../keyboard.pm_.c:207
msgid "Israeli"
msgstr "Izraelska"

#: ../../keyboard.pm_.c:208
msgid "Israeli (Phonetic)"
msgstr "Izraelska (fonetska)"

#: ../../keyboard.pm_.c:209
msgid "Iranian"
msgstr "Iranska"

#: ../../keyboard.pm_.c:210
msgid "Icelandic"
msgstr "Islandska"

#: ../../keyboard.pm_.c:211
msgid "Italian"
msgstr "Talijanska"

#: ../../keyboard.pm_.c:212
msgid "Inuktitut"
msgstr ""

#: ../../keyboard.pm_.c:213
msgid "Japanese 106 keys"
msgstr "Japanska (106 tipaka)"

#: ../../keyboard.pm_.c:216
msgid "Korean keyboard"
msgstr "Korejska tipkovnica"

#: ../../keyboard.pm_.c:217
msgid "Latin American"
msgstr "Latino američka"

#: ../../keyboard.pm_.c:218
#, fuzzy
msgid "Laotian"
msgstr "Latvija"

#: ../../keyboard.pm_.c:219
msgid "Lithuanian AZERTY (old)"
msgstr "Lituanska AZERTY (stara)"

#: ../../keyboard.pm_.c:221
msgid "Lithuanian AZERTY (new)"
msgstr "Lituanska AZERTY (nova)"

#: ../../keyboard.pm_.c:222
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Lituanska \"number row\" QWERTY"

#: ../../keyboard.pm_.c:223
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Lituanska \"fonetska\" QWERTY"

#: ../../keyboard.pm_.c:224
msgid "Latvian"
msgstr "Latvija"

#: ../../keyboard.pm_.c:225
msgid "Macedonian"
msgstr "Makedonska"

#: ../../keyboard.pm_.c:226
msgid "Myanmar (Burmese)"
msgstr ""

#: ../../keyboard.pm_.c:227
#, fuzzy
msgid "Mongolian (cyrillic)"
msgstr "Srpska (čirilica)"

#: ../../keyboard.pm_.c:228
msgid "Maltese (UK)"
msgstr ""

#: ../../keyboard.pm_.c:229
msgid "Maltese (US)"
msgstr ""

#: ../../keyboard.pm_.c:230
msgid "Dutch"
msgstr "Nizozemska"

#: ../../keyboard.pm_.c:232
msgid "Polish (qwerty layout)"
msgstr "Poljska (qwerty raspored)"

#: ../../keyboard.pm_.c:233
msgid "Polish (qwertz layout)"
msgstr "Poljska (qwertz raspored)"

#: ../../keyboard.pm_.c:234
msgid "Portuguese"
msgstr "Portugalska"

#: ../../keyboard.pm_.c:235
msgid "Canadian (Quebec)"
msgstr "Kanadska (Quebec)"

#: ../../keyboard.pm_.c:237
msgid "Romanian (qwertz)"
msgstr "Rumunjska (qwertz)"

#: ../../keyboard.pm_.c:238
msgid "Romanian (qwerty)"
msgstr "Rumunjska (qwerty)"

#: ../../keyboard.pm_.c:240
msgid "Russian (Yawerty)"
msgstr "Ruska (Yawerty)"

#: ../../keyboard.pm_.c:242
msgid "Slovenian"
msgstr "Slovenska"

#: ../../keyboard.pm_.c:243
msgid "Slovakian (QWERTZ)"
msgstr "Slovačka (QWERTZ)"

#: ../../keyboard.pm_.c:244
msgid "Slovakian (QWERTY)"
msgstr "Slovačka (QWERTY)"

#: ../../keyboard.pm_.c:246
msgid "Serbian (cyrillic)"
msgstr "Srpska (čirilica)"

#: ../../keyboard.pm_.c:248
msgid "Tamil (Unicode)"
msgstr "Tamil (Unicode)"

#: ../../keyboard.pm_.c:249
msgid "Tamil (TSCII)"
msgstr "Tamil (TSCII)"

#: ../../keyboard.pm_.c:250
msgid "Thai keyboard"
msgstr "Tajlandska tipkovnica"

#: ../../keyboard.pm_.c:252
msgid "Tajik keyboard"
msgstr "Tajik tipkovnica"

#: ../../keyboard.pm_.c:253
msgid "Turkish (traditional \"F\" model)"
msgstr "Turska (tradicionalni \"F\" model)"

#: ../../keyboard.pm_.c:254
msgid "Turkish (modern \"Q\" model)"
msgstr "Turska (moderna  \"Q\" model)"

#: ../../keyboard.pm_.c:256
msgid "Ukrainian"
msgstr "Ukrajinska"

#: ../../keyboard.pm_.c:259
msgid "US keyboard (international)"
msgstr "US keyboard (internacionalna)"

#: ../../keyboard.pm_.c:260
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vijetnamska \"numeric row\" QWERTY"

#: ../../keyboard.pm_.c:261
msgid "Yugoslavian (latin)"
msgstr "Jugoslavenska (latinična)"

#: ../../keyboard.pm_.c:268
msgid "Right Alt key"
msgstr "Desna Alt tipka"

#: ../../keyboard.pm_.c:269
msgid "Both Shift keys simultaneously"
msgstr "Obe Shift tipke istodobno"

#: ../../keyboard.pm_.c:270
msgid "Control and Shift keys simultaneously"
msgstr "Control i Shift tipke istodobno"

#: ../../keyboard.pm_.c:271
msgid "CapsLock key"
msgstr "CapsLock tipka"

#: ../../keyboard.pm_.c:272
msgid "Ctrl and Alt keys simultaneously"
msgstr "Ctrl i Alt tipke istodobno"

#: ../../keyboard.pm_.c:273
msgid "Alt and Shift keys simultaneously"
msgstr "Alt i Shift tipku istodobno"

#: ../../keyboard.pm_.c:274
msgid "\"Menu\" key"
msgstr "\"Menu\" tipka"

#: ../../keyboard.pm_.c:275
msgid "Left \"Windows\" key"
msgstr "Lijeva \"Windows\" tipka"

#: ../../keyboard.pm_.c:276
msgid "Right \"Windows\" key"
msgstr "Desna \"Windows\" tipka"

#: ../../loopback.pm_.c:32
#, c-format
msgid "Circular mounts %s\n"
msgstr "Kružno montiranje %s\n"

#: ../../lvm.pm_.c:98
msgid "Remove the logical volumes first\n"
msgstr "Ukloni logički volumen prvo\n"

#: ../../modparm.pm_.c:50
#, fuzzy
msgid "a number"
msgstr "Telefonski broj"

#: ../../modparm.pm_.c:52
#, c-format
msgid "%d comma separated numbers"
msgstr ""

#: ../../modparm.pm_.c:52
#, c-format
msgid "%d comma separated strings"
msgstr ""

#: ../../modparm.pm_.c:54
msgid "comma separated numbers"
msgstr ""

#: ../../modparm.pm_.c:54
#, fuzzy
msgid "comma separated strings"
msgstr "Formatiraj particije"

#: ../../modules.pm_.c:293
msgid ""
"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
"PCMCIA podrška više ne postoji za 2.2 kernele. Molimo koristite 2.4 kernel."

#: ../../mouse.pm_.c:25
msgid "Sun - Mouse"
msgstr "Sun - miš"

#: ../../mouse.pm_.c:32
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: ../../mouse.pm_.c:33
msgid "Generic PS2 Wheel Mouse"
msgstr "Generički PS2 miš s kotačićem"

#: ../../mouse.pm_.c:34
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:65
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:61
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../mouse.pm_.c:38
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../mouse.pm_.c:39 ../../mouse.pm_.c:48
#, fuzzy
msgid "Microsoft Explorer"
msgstr "Microsoft IntelliMouse"

#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:70
msgid "1 button"
msgstr "1 gumb"

#: ../../mouse.pm_.c:45 ../../mouse.pm_.c:53
msgid "Generic 2 Button Mouse"
msgstr "Generički miš s 2 gumba"

#: ../../mouse.pm_.c:47
msgid "Wheel"
msgstr "Kotačić"

#: ../../mouse.pm_.c:51
msgid "serial"
msgstr "serijski"

#: ../../mouse.pm_.c:54
msgid "Generic 3 Button Mouse"
msgstr "Generički miš s 3 gumba"

#: ../../mouse.pm_.c:55
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: ../../mouse.pm_.c:56
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: ../../mouse.pm_.c:57
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: ../../mouse.pm_.c:59
msgid "Logitech CC Series"
msgstr "Logitech CC serije"

#: ../../mouse.pm_.c:60
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: ../../mouse.pm_.c:62
msgid "MM Series"
msgstr "MM Serije"

#: ../../mouse.pm_.c:63
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../mouse.pm_.c:64
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Miš (serijski, stari C7 tip)"

#: ../../mouse.pm_.c:68
msgid "busmouse"
msgstr "busmiš"

#: ../../mouse.pm_.c:71
msgid "2 buttons"
msgstr "2 gumba"

#: ../../mouse.pm_.c:72
msgid "3 buttons"
msgstr "3 gumba"

#: ../../mouse.pm_.c:75
msgid "none"
msgstr "niti jedan"

#: ../../mouse.pm_.c:77
msgid "No mouse"
msgstr "Nema miša"

#: ../../mouse.pm_.c:488
msgid "Please test the mouse"
msgstr "Molimo istestirajte miša."

#: ../../mouse.pm_.c:489
msgid "To activate the mouse,"
msgstr "Za aktiviranje miša,"

#: ../../mouse.pm_.c:490
msgid "MOVE YOUR WHEEL!"
msgstr "POMAKNITE VAŠ KOTAČIĆ!"

#: ../../my_gtk.pm_.c:64
#, fuzzy
msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"

#: ../../my_gtk.pm_.c:159
msgid "Finish"
msgstr "Završi"

#: ../../my_gtk.pm_.c:159 ../../printerdrake.pm_.c:2126
msgid "Next ->"
msgstr "Slijedeće ->"

#: ../../my_gtk.pm_.c:287
msgid "Is this correct?"
msgstr "Da li je ovo ispravno?"

#: ../../my_gtk.pm_.c:359 ../../services.pm_.c:222
msgid "Info"
msgstr "Info"

#: ../../my_gtk.pm_.c:380
msgid "Expand Tree"
msgstr "Proširi stablo"

#: ../../my_gtk.pm_.c:381
msgid "Collapse Tree"
msgstr "Sažmi stablo"

#: ../../my_gtk.pm_.c:382
msgid "Toggle between flat and group sorted"
msgstr "Prebaci između ravno i grupno sortiranog"

#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
msgid "Connect to the Internet"
msgstr "Spoji se na Internet"

#: ../../network/adsl.pm_.c:20
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few ones use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"Najčešći način da se povežete sa adsl-om je pppoe.\n"
"Neke veze koriste pptp, a nekoliko koriste dhcp.\n"
"Ukoliko neznate, izaberite 'koristi pppoe'"

#: ../../network/adsl.pm_.c:22
msgid "Alcatel speedtouch usb"
msgstr "Alcatel speedtouch usb"

#: ../../network/adsl.pm_.c:22
msgid "ECI Hi-Focus"
msgstr ""

#: ../../network/adsl.pm_.c:22
msgid "use dhcp"
msgstr "koristi dhcp"

#: ../../network/adsl.pm_.c:22
msgid "use pppoe"
msgstr "koristi pppoe"

#: ../../network/adsl.pm_.c:22
msgid "use pptp"
msgstr "koristi pptp"

#: ../../network/drakfirewall.pm_.c:12
#, fuzzy
msgid "Web Server"
msgstr "Poslužitelj"

#: ../../network/drakfirewall.pm_.c:17
#, fuzzy
msgid "Domain Name Server"
msgstr "Ime domene"

# ../../share/compssUsers
#: ../../network/drakfirewall.pm_.c:32
#, fuzzy
msgid "Mail Server"
msgstr "Poslužitelj baza podataka"

#: ../../network/drakfirewall.pm_.c:37
#, fuzzy
msgid "POP and IMAP Server"
msgstr "LDAP Poslužitelj"

#: ../../network/drakfirewall.pm_.c:111
#, fuzzy
msgid "No network card"
msgstr "ne mogu pronaći niti jednu mrežnu karticu"

#: ../../network/drakfirewall.pm_.c:129
#, fuzzy
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"tinyfirewall podešavanje\n"
"\n"
"Ovo podešava osobni vatrozid za ovo Mandrake Linux računalo.\n"
"Za snažno primjenjena vatrozidna rješenja, molimo pogledajte\n"
"specijaliziranu MandrakeSecurity Firewall distribuciju."

#: ../../network/drakfirewall.pm_.c:147
msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""

#: ../../network/drakfirewall.pm_.c:148
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp.\n"
"Have a look at /etc/services for information."
msgstr ""

#: ../../network/drakfirewall.pm_.c:154
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535."
msgstr ""

#: ../../network/drakfirewall.pm_.c:162
msgid "Everything (no firewall)"
msgstr ""

#: ../../network/drakfirewall.pm_.c:164
#, fuzzy
msgid "Other ports"
msgstr "Iskušaj portove"

#: ../../network/ethernet.pm_.c:37
msgid ""
"Which dhcp client do you want to use?\n"
"Default is dhcpcd"
msgstr ""
"Koji dhcp klijent želite koristiti?\n"
"Pretpostavljeni je dhcpcd"

#: ../../network/ethernet.pm_.c:88
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"Nije pronađen niti jedan mrežni adapter na vašem sustavu.\n"
"Ne mogu postaviti ovu vrstu veze."

#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:240
msgid "Choose the network interface"
msgstr "Odaberite mrežni međusklop"

#: ../../network/ethernet.pm_.c:93
msgid ""
"Please choose which network adapter you want to use to connect to Internet"
msgstr ""
"Molimo izaberite sa kojim mrežnim adapterom se želite priključiti na Internet"

#: ../../network/ethernet.pm_.c:178
msgid "no network card found"
msgstr "ne mogu pronaći niti jednu mrežnu karticu"

#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:365
msgid "Configuring network"
msgstr "Podešavam mrežu"

#: ../../network/ethernet.pm_.c:203
msgid ""
"Please enter your host name if you know it.\n"
"Some DHCP servers require the hostname to work.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''."
msgstr ""
"Molim unesite ime računala ukoliko ga znate.\n"
"Neki DHCP serveri zahtjevaju specifiranje imena računala da bi radili.\n"
"Vaše ime računala bi trebalo biti potpuno-kvalificirano ime računala,\n"
"kao što je ``mybox.mylab.myco.com''."

#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:370
msgid "Host name"
msgstr "Ime računala"

#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
#: ../../network/netconnect.pm_.c:94 ../../network/netconnect.pm_.c:108
#: ../../network/netconnect.pm_.c:163 ../../network/netconnect.pm_.c:178
#: ../../network/netconnect.pm_.c:205 ../../network/netconnect.pm_.c:228
#: ../../network/netconnect.pm_.c:236
msgid "Network Configuration Wizard"
msgstr "Čarobnjak mrežnih postavki"

#: ../../network/isdn.pm_.c:22
msgid "External ISDN modem"
msgstr "Vanjski ISDN modem"

#: ../../network/isdn.pm_.c:22
msgid "Internal ISDN card"
msgstr "Interna ISDN kartica"

#: ../../network/isdn.pm_.c:22
msgid "What kind is your ISDN connection?"
msgstr "Kakav tip ISDN veze koristite ?"

#: ../../network/isdn.pm_.c:45
msgid ""
"Which ISDN configuration do you prefer?\n"
"\n"
"* The Old configuration uses isdn4net. It contains powerful\n"
"  tools, but is tricky to configure, and not standard.\n"
"\n"
"* The New configuration is easier to understand, more\n"
"  standard, but with less tools.\n"
"\n"
"We recommand the light configuration.\n"
msgstr ""
"Koju ISDN konfiguraciju preferirate?\n"
"\n"
"* Stara konfiguracija koristi isdn4net. Ona sadrži snažne\n"
"  alate, ali je teška za konfiguriranje, nije standardna.\n"
"\n"
"* Nova konfiguracija je lakša za razumiti, mnogo standardnija,\n"
"  ali sa manje alata.\n"
"\n"
"Preporučamo laku konfiguraciju.\n"

#: ../../network/isdn.pm_.c:54
msgid "New configuration (isdn-light)"
msgstr "Nova konfiguracija (isdn-light)"

#: ../../network/isdn.pm_.c:54
msgid "Old configuration (isdn4net)"
msgstr "Stara konfiguracija (isdn4net)"

#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
#: ../../network/isdn.pm_.c:215
msgid "ISDN Configuration"
msgstr "ISDN postavke"

#: ../../network/isdn.pm_.c:170
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"Izaberite vašeg pružatelja Internet usluga.\n"
" Ako nije na popisu odaberite Drugi"

#: ../../network/isdn.pm_.c:183
msgid "Europe protocol"
msgstr "Europski protokol"

#: ../../network/isdn.pm_.c:183
msgid "Europe protocol (EDSS1)"
msgstr "Europski protokol (EDSS1)"

#: ../../network/isdn.pm_.c:185
msgid "Protocol for the rest of the world"
msgstr "Protokol za ostatak svijeta"

#: ../../network/isdn.pm_.c:185
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"Protokol za ostatak svijeta \n"
" bez D-kanala (za iznajmljene linije)"

#: ../../network/isdn.pm_.c:189
msgid "Which protocol do you want to use?"
msgstr "Koji protokol želite koristiti ?"

#: ../../network/isdn.pm_.c:199
msgid "What kind of card do you have?"
msgstr "Kakvu karticu posjedujete?"

#: ../../network/isdn.pm_.c:200
msgid "I don't know"
msgstr "Ne znam"

#: ../../network/isdn.pm_.c:200
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../network/isdn.pm_.c:200
msgid "PCI"
msgstr "PCI"

#: ../../network/isdn.pm_.c:206
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Ukoliko imate ISA karticu, vrijednosti na slijedećem zaslonu trebale bi biti "
"dobre.\n"
"\n"
"Ukoliko imate PCMCIA karticu, morate znati irq i io vaše kartice.\n"

#: ../../network/isdn.pm_.c:210
msgid "Abort"
msgstr "Prekini"

#: ../../network/isdn.pm_.c:210
msgid "Continue"
msgstr "Nastavi"

#: ../../network/isdn.pm_.c:216
msgid "Which is your ISDN card?"
msgstr "Kakvu ISDN karticu imate?"

#: ../../network/isdn.pm_.c:235
msgid ""
"I have detected an ISDN PCI card, but I don't know its type. Please select a "
"PCI card on the next screen."
msgstr ""
"Pronašao sam ISDN PCI karticu međutim ne znam kojeg je tipa. Molim izaberite "
"vašu PCI karticu na slijedećem ekranu."

#: ../../network/isdn.pm_.c:244
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
"Nisam našao niti jednu ISDN PCI karticu. Molim izaberite vašu PCI karticu na "
"slijedećem ekranu."

#: ../../network/modem.pm_.c:39
msgid "Please choose which serial port your modem is connected to."
msgstr "Izaberite serijski port na kojemu se nalazi modem."

#: ../../network/modem.pm_.c:44
msgid "Dialup options"
msgstr "Podesi dialup"

#: ../../network/modem.pm_.c:45 ../../standalone/drakconnect_.c:621
msgid "Connection name"
msgstr "Ime veze"

#: ../../network/modem.pm_.c:46 ../../standalone/drakconnect_.c:622
msgid "Phone number"
msgstr "Telefonski broj"

#: ../../network/modem.pm_.c:47 ../../standalone/drakconnect_.c:623
msgid "Login ID"
msgstr "Prijavno ime"

#: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625
msgid "CHAP"
msgstr "CHAP"

#: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625
msgid "PAP"
msgstr "PAP"

#: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625
msgid "Script-based"
msgstr "Temeljem skripta"

#: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625
msgid "Terminal-based"
msgstr "Terminal-zasnovano"

#: ../../network/modem.pm_.c:50 ../../standalone/drakconnect_.c:626
msgid "Domain name"
msgstr "Ime domene"

#: ../../network/modem.pm_.c:51 ../../standalone/drakconnect_.c:627
msgid "First DNS Server (optional)"
msgstr "Prvi DNS poslužitelj (opciono)"

#: ../../network/modem.pm_.c:52 ../../standalone/drakconnect_.c:628
msgid "Second DNS Server (optional)"
msgstr "Drugi DNS poslužitelj (opciono)"

#: ../../network/netconnect.pm_.c:33
msgid ""
"\n"
"You can disconnect or reconfigure your connection."
msgstr ""
"\n"
"Možete isključiti ili ponovno konfigurirati vašu vezu."

#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
msgid ""
"\n"
"You can reconfigure your connection."
msgstr ""
"\n"
"Možete ponovno konfigurirati vašu vezu."

#: ../../network/netconnect.pm_.c:33
msgid "You are currently connected to internet."
msgstr "Trenutno ste spojeni na internet."

#: ../../network/netconnect.pm_.c:36
msgid ""
"\n"
"You can connect to Internet or reconfigure your connection."
msgstr ""
"\n"
"Možete se spojiti na Internet ili ponovno konfigurirati vašu vezu."

#: ../../network/netconnect.pm_.c:36
msgid "You are not currently connected to Internet."
msgstr "Niste trenutno spojeni na Internet."

#: ../../network/netconnect.pm_.c:40
msgid "Connect"
msgstr "Poveži"

#: ../../network/netconnect.pm_.c:42
msgid "Disconnect"
msgstr "Odspoji"

#: ../../network/netconnect.pm_.c:44
msgid "Configure the connection"
msgstr "Podesi vezu"

#: ../../network/netconnect.pm_.c:49
msgid "Internet connection & configuration"
msgstr "Internet veza i postava"

#: ../../network/netconnect.pm_.c:99
#, c-format
msgid "We are now going to configure the %s connection."
msgstr "Sada ćemo podesiti %s vezu."

#: ../../network/netconnect.pm_.c:108
#, c-format
msgid ""
"\n"
"\n"
"\n"
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press OK to continue."
msgstr ""
"\n"
"\n"
"\n"
"Sada ćemo podesiti %s vezu.\n"
"\n"
"\n"
"Pritisnite U redu za nastavak."

#: ../../network/netconnect.pm_.c:137 ../../network/netconnect.pm_.c:255
#: ../../network/netconnect.pm_.c:275 ../../network/tools.pm_.c:63
msgid "Network Configuration"
msgstr "Mrežne postavke"

#: ../../network/netconnect.pm_.c:138
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Pošto radite mrežnu instalaciju, vaša mreža je već konfigurirana.\n"
"Pritisnite U redu da zadržite postojeće postavke, ili Odustani za ponovno "
"konfiguriranje vaše mrežne/Internet veze.\n"

#: ../../network/netconnect.pm_.c:164
msgid ""
"Welcome to The Network Configuration Wizard.\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
"Dobro Došli u Čarobnjak za podešavanje mreže\n"
"\n"
"Sada ćemo konfigurirati vašu internet/mrežnu vezu.\n"
"Ukoliko ne želite koristiti auto detekciju, odselektirajte kvadratić s "
"potvrdom.\n"

#: ../../network/netconnect.pm_.c:170
msgid "Choose the profile to configure"
msgstr "Izaberite profil za konfiguriranje"

#: ../../network/netconnect.pm_.c:171
msgid "Use auto detection"
msgstr "Koristi auto detekciju"

#: ../../network/netconnect.pm_.c:172 ../../printerdrake.pm_.c:3151
#: ../../standalone/drakconnect_.c:274 ../../standalone/drakconnect_.c:277
#: ../../standalone/drakfloppy_.c:145
msgid "Expert Mode"
msgstr "Ekspertni mod"

#: ../../network/netconnect.pm_.c:178 ../../printerdrake.pm_.c:386
msgid "Detecting devices..."
msgstr "Otkrivanje uređaja..."

#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
msgid "Normal modem connection"
msgstr "Normalna modemska veza"

#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
#, c-format
msgid "detected on port %s"
msgstr "detektiran na portu %s"

#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
msgid "ISDN connection"
msgstr "ISDN veza"

#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
#, c-format
msgid "detected %s"
msgstr "detektirano %s"

#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
msgid "ADSL connection"
msgstr "ADSL veza"

#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
#, c-format
msgid "detected on interface %s"
msgstr "detektirano na međusklopu %s"

#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
msgid "Cable connection"
msgstr "Kablovska veza"

#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
msgid "cable connection detected"
msgstr "detektirana kablovska veza"

#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
msgid "LAN connection"
msgstr "LAN veza"

#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
msgid "ethernet card(s) detected"
msgstr "ethernet kartica(e) pronađene"

#: ../../network/netconnect.pm_.c:205
msgid "Choose the connection you want to configure"
msgstr "Izaberite vezu koju želite podesiti"

#: ../../network/netconnect.pm_.c:229
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Odabrali ste više načina za spajanje na Internet.\n"
"Molimo izaberite koji želite koristiti.\n"
"\n"

#: ../../network/netconnect.pm_.c:230
msgid "Internet connection"
msgstr "Internet veza"

#: ../../network/netconnect.pm_.c:236
msgid "Do you want to start the connection at boot?"
msgstr "Da li želite pokreniti vašu vezu kod svakog podizanja (boot) sustava ?"

#: ../../network/netconnect.pm_.c:250
msgid "Network configuration"
msgstr "Mrežne postavke"

#: ../../network/netconnect.pm_.c:251
msgid "The network needs to be restarted"
msgstr "Mreža treba biti ponovno pokrenuta"

#: ../../network/netconnect.pm_.c:255
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Problem se pojavio prilikom ponovnog pokretanja mreže: \n"
"\n"
"%s"

#: ../../network/netconnect.pm_.c:265
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"The configuration will now be applied to your system.\n"
"\n"
msgstr ""
"Čestitam, mrežna i internet konfiguracija je završena.\n"
"\n"
"Konfiguracija će sada biti primjenjena na vašem sustavu.\n"

#: ../../network/netconnect.pm_.c:269
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"Nakon što je to napravljeno, preporučamo da ponovno pokrenete vaše X\n"
"okružje kako bi izbjegli probleme prilikom promjene imena računala."

#: ../../network/netconnect.pm_.c:270
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""
"Došlo je do problema tijekom namještanja. Provjerite vezu putem "
"net_monitora\n"
"ili mcca. Ako vaša veza ne radi, možda ćete morati ponovno pokrenuti\n"
"konfiguraciju"

#: ../../network/network.pm_.c:294
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"UPOZORENJE: Ovaj uređaj je bio prethodno konfiguriran za spajanje na "
"Internet.\n"
"Jednostavno prihvatite ovaj uređaj konfiguriran.\n"
"Promjena polja niže će prepisati ovu konfiguraciju."

#: ../../network/network.pm_.c:299
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Molim unesite IP postavke za ovaj stroj.\n"
"Svaka stavka treba biti unesena kao  IP adresa odvojena\n"
"točkama (npr. 1.2.3.4)"

#: ../../network/network.pm_.c:309 ../../network/network.pm_.c:310
#, c-format
msgid "Configuring network device %s"
msgstr "Podešavam mrežni uređaj %s"

#: ../../network/network.pm_.c:310
#, c-format
msgid " (driver %s)"
msgstr " (upravljački program %s)"

#: ../../network/network.pm_.c:312 ../../standalone/drakconnect_.c:231
#: ../../standalone/drakconnect_.c:467
msgid "IP address"
msgstr "IP adresa"

#: ../../network/network.pm_.c:313 ../../standalone/drakconnect_.c:468
msgid "Netmask"
msgstr "Netmaska"

#: ../../network/network.pm_.c:314
msgid "(bootp/dhcp)"
msgstr "(bootp/dhcp)"

#: ../../network/network.pm_.c:314
msgid "Automatic IP"
msgstr "Automatski IP"

#: ../../network/network.pm_.c:315
msgid "Start at boot"
msgstr "Pokrenuto pri podizanju"

#: ../../network/network.pm_.c:336 ../../printerdrake.pm_.c:860
msgid "IP address should be in format 1.2.3.4"
msgstr "IP adresa treba biti oblika 1.2.3.4"

#: ../../network/network.pm_.c:366
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""
"Molim unesite ime računala.\n"
"Ime računala treba biti puno ime računala,\n"
"primjerice mojeracunalo.odjel.domena.hr.\n"
"Također unesite IP adresu gateway računala ako gateway postoji"

#: ../../network/network.pm_.c:371
msgid "DNS server"
msgstr "DNS poslužitelj"

#: ../../network/network.pm_.c:372
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Gateway (npr. %s)"

#: ../../network/network.pm_.c:374
msgid "Gateway device"
msgstr "Gateway uređaj"

#: ../../network/network.pm_.c:386
msgid "Proxies configuration"
msgstr "Postava proxy-a"

#: ../../network/network.pm_.c:387
msgid "HTTP proxy"
msgstr "HTTP proxy"

#: ../../network/network.pm_.c:388
msgid "FTP proxy"
msgstr "FTP proxy"

#: ../../network/network.pm_.c:389
msgid "Track network card id (useful for laptops)"
msgstr "Prati id mrežne kartice (korisno za laptope)"

#: ../../network/network.pm_.c:392
msgid "Proxy should be http://..."
msgstr "Proxy treba biti http://..."

#: ../../network/network.pm_.c:393
msgid "Proxy should be ftp://..."
msgstr "Proxy treba biti ftp://..."

#: ../../network/shorewall.pm_.c:24
msgid "Firewalling configuration detected!"
msgstr "Detektirana je vatrozidna konfiguracija!"

#: ../../network/shorewall.pm_.c:25
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fix after installation."
msgstr ""
"Upozorenje! Postojeća vatrozidna konfiguracija je pronađena. Morati ćete "
"ručno popraviti neke dijelove nakon instalacije."

#: ../../network/tools.pm_.c:41
msgid "Internet configuration"
msgstr "Postava Interneta"

#: ../../network/tools.pm_.c:42
msgid "Do you want to try to connect to the Internet now?"
msgstr "Da li želite pokušati spajanje na Internet ?"

#: ../../network/tools.pm_.c:46 ../../standalone/drakconnect_.c:196
msgid "Testing your connection..."
msgstr "Testiram vašu vezu..."

#: ../../network/tools.pm_.c:56
msgid "The system is now connected to Internet."
msgstr "Sustav je sada spojen na Internet."

#: ../../network/tools.pm_.c:57
msgid "For security reason, it will be disconnected now."
msgstr "Zbog sigurnosnih razloga, biti će sada odspojen."

#: ../../network/tools.pm_.c:58
msgid ""
"The system doesn't seem to be connected to internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Čini se kako sustav nije spojen na internet.\n"
"Probajte ponovno podesiti vašu vezu."

#: ../../network/tools.pm_.c:82
msgid "Connection Configuration"
msgstr "Postava Veze"

#: ../../network/tools.pm_.c:83
msgid "Please fill or check the field below"
msgstr "Molim ispunite ili provjerite vrijednost doljnjeg polja"

#: ../../network/tools.pm_.c:85 ../../standalone/drakconnect_.c:607
msgid "Card IRQ"
msgstr "IRQ kartice"

#: ../../network/tools.pm_.c:86 ../../standalone/drakconnect_.c:608
msgid "Card mem (DMA)"
msgstr "Memorija kartice (DMA)"

#: ../../network/tools.pm_.c:87 ../../standalone/drakconnect_.c:609
msgid "Card IO"
msgstr "IO kartice"

#: ../../network/tools.pm_.c:88 ../../standalone/drakconnect_.c:610
msgid "Card IO_0"
msgstr "IO_0 kartice"

#: ../../network/tools.pm_.c:89 ../../standalone/drakconnect_.c:611
msgid "Card IO_1"
msgstr "IO_1 kartice"

#: ../../network/tools.pm_.c:90 ../../standalone/drakconnect_.c:612
msgid "Your personal phone number"
msgstr "Vaš osobni telefonski broj"

#: ../../network/tools.pm_.c:91 ../../standalone/drakconnect_.c:613
msgid "Provider name (ex provider.net)"
msgstr "Ime ISP pružatelja (npr. provider.hr)"

#: ../../network/tools.pm_.c:92 ../../standalone/drakconnect_.c:614
msgid "Provider phone number"
msgstr "Telef. broj pružatelja"

#: ../../network/tools.pm_.c:93 ../../standalone/drakconnect_.c:615
msgid "Provider dns 1 (optional)"
msgstr "Pružateljev DNS 1 (opciono)"

#: ../../network/tools.pm_.c:94 ../../standalone/drakconnect_.c:616
msgid "Provider dns 2 (optional)"
msgstr "Pružateljev DNS 2 (opciono)"

#: ../../network/tools.pm_.c:95
msgid "Choose your country"
msgstr "Odaberite vašu zemlju"

#: ../../network/tools.pm_.c:96 ../../standalone/drakconnect_.c:619
msgid "Dialing mode"
msgstr "Način biranja"

#: ../../network/tools.pm_.c:97 ../../standalone/drakconnect_.c:631
msgid "Connection speed"
msgstr "Brzina"

#: ../../network/tools.pm_.c:98 ../../standalone/drakconnect_.c:632
msgid "Connection timeout (in sec)"
msgstr "Vrijeme čekanja veze (u sek)"

#: ../../network/tools.pm_.c:99 ../../standalone/drakconnect_.c:617
msgid "Account Login (user name)"
msgstr "Korisničko ime"

#: ../../network/tools.pm_.c:100 ../../standalone/drakconnect_.c:618
#: ../../standalone/drakconnect_.c:649
msgid "Account Password"
msgstr "Korisnička Lozinka"

#: ../../network/tools.pm_.c:104 ../../network/tools.pm_.c:118
msgid "United Kingdom"
msgstr ""

#: ../../partition_table.pm_.c:602
msgid "mount failed: "
msgstr "montiranje nije uspjelo: "

#: ../../partition_table.pm_.c:666
msgid "Extended partition not supported on this platform"
msgstr "Proširene particije nisu podržane na ovoj platformi"

#: ../../partition_table.pm_.c:684
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"Imate rupu u svojoj particijskoj tablici međutim ja je ne mogu iskoristiti.\n"
"Jedino rješenje je da pomaknete vašu primarnu particiju kako bi rupa bila\n"
"odmah do proširenih particija."

#: ../../partition_table.pm_.c:774
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Vraćanje iz datoteke %s nije uspjelo: %s"

#: ../../partition_table.pm_.c:776
msgid "Bad backup file"
msgstr "Loša backup datoteka"

#: ../../partition_table.pm_.c:798
#, c-format
msgid "Error writing to file %s"
msgstr "Greška prilikom pisanja u datoteku %s"

#: ../../partition_table/raw.pm_.c:189
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random trash"
msgstr ""
"Nešto loše se dešava sa vašim pogonom. \n"
"Test za provjeru integriteta podataka je neuspješan. \n"
"To znači da pisanje bilo čega na vaš disk rezultira slučajnim smećem"

#: ../../pkgs.pm_.c:26
msgid "must have"
msgstr "potrebno"

#: ../../pkgs.pm_.c:27
msgid "important"
msgstr "važno"

#: ../../pkgs.pm_.c:28
msgid "very nice"
msgstr "vrlo lijepo"

#: ../../pkgs.pm_.c:29
msgid "nice"
msgstr "lijepo"

#: ../../pkgs.pm_.c:30
msgid "maybe"
msgstr "možda"

#: ../../printer.pm_.c:26
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Common Unix Printing System"

#: ../../printer.pm_.c:27
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR Nova Generacija"

#: ../../printer.pm_.c:28
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Daemon"

#: ../../printer.pm_.c:29
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - Ispiši, Bez Reda"

#: ../../printer.pm_.c:34 ../../printer.pm_.c:1125
msgid "CUPS"
msgstr "CUPS"

#: ../../printer.pm_.c:35
msgid "LPRng"
msgstr "LPRng"

#: ../../printer.pm_.c:36
msgid "LPD"
msgstr "LPD"

#: ../../printer.pm_.c:37
msgid "PDQ"
msgstr "PDQ"

#: ../../printer.pm_.c:49
msgid "Local printer"
msgstr "Lokalni pisač"

#: ../../printer.pm_.c:50
msgid "Remote printer"
msgstr "Udaljeni pisač"

#: ../../printer.pm_.c:51
msgid "Printer on remote CUPS server"
msgstr "Pisač na udaljenom CUPS poslužitelju"

#: ../../printer.pm_.c:52 ../../printerdrake.pm_.c:883
msgid "Printer on remote lpd server"
msgstr "Pisač na udaljenom lpd poslužitelju"

#: ../../printer.pm_.c:53
msgid "Network printer (TCP/Socket)"
msgstr "Mrežni pisač (TCP/socket)"

#: ../../printer.pm_.c:54
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "Pisač na SMB/Windows 95/98/NT poslužitelju"

#: ../../printer.pm_.c:55
msgid "Printer on NetWare server"
msgstr "Pisač na NetWare poslužitelju"

#: ../../printer.pm_.c:56 ../../printerdrake.pm_.c:887
msgid "Enter a printer device URI"
msgstr "Unesite URI pisača"

#: ../../printer.pm_.c:57
msgid "Pipe job into a command"
msgstr "Proslijedi (pipe) na komandu"

#: ../../printer.pm_.c:324 ../../printer.pm_.c:366 ../../printer.pm_.c:533
#, fuzzy
msgid "Unknown Model"
msgstr "Nepoznati model"

#: ../../printer.pm_.c:735 ../../printer.pm_.c:926 ../../printer.pm_.c:1318
#: ../../printerdrake.pm_.c:2260 ../../printerdrake.pm_.c:3414
msgid "Unknown model"
msgstr "Nepoznati model"

#: ../../printer.pm_.c:763
msgid "Local Printers"
msgstr "Lokalni pisači"

#: ../../printer.pm_.c:765 ../../printer.pm_.c:1126
msgid "Remote Printers"
msgstr "Udaljeni pisači"

#: ../../printer.pm_.c:772 ../../printerdrake.pm_.c:404
#, c-format
msgid " on parallel port \\/*%s"
msgstr " na paralelnom portu \\/*%s"

#: ../../printer.pm_.c:775 ../../printerdrake.pm_.c:406
#, c-format
msgid ", USB printer \\/*%s"
msgstr ", USB pisač \\/*%s"

#: ../../printer.pm_.c:780
#, c-format
msgid ", multi-function device on parallel port \\/*%s"
msgstr ", multi-funkcionalan uređaj na paralelnom portu \\/*%s"

#: ../../printer.pm_.c:783
msgid ", multi-function device on USB"
msgstr ", multi-funkcionalan uređaj na USBu"

#: ../../printer.pm_.c:785
msgid ", multi-function device on HP JetDirect"
msgstr ", multi-funkcionalan uređaj na HP JetDirectu"

#: ../../printer.pm_.c:787
msgid ", multi-function device"
msgstr ", multi-funkcionalan uređaj"

#: ../../printer.pm_.c:790
#, c-format
msgid ", printing to %s"
msgstr ", ispis na %s"

#: ../../printer.pm_.c:792
#, fuzzy, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr "na LPD poslužitelju \"%s\", pisač \"%s\""

#: ../../printer.pm_.c:794
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", TCP/IP host \"%s\", port %s"

#: ../../printer.pm_.c:798
#, fuzzy, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr "na Windows poslužitelju \"%s\", dijeli \"%s\""

#: ../../printer.pm_.c:802
#, fuzzy, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr "na Novell poslužitelju \"%s\", pisač \"%s\""

#: ../../printer.pm_.c:804
#, c-format
msgid ", using command %s"
msgstr ", korištenjem komande %s"

#: ../../printer.pm_.c:923 ../../printerdrake.pm_.c:1656
msgid "Raw printer (No driver)"
msgstr "Raw printer (Bez upravljačkog programa)"

#: ../../printer.pm_.c:1095
#, c-format
msgid "(on %s)"
msgstr "(na %s)"

#: ../../printer.pm_.c:1097
msgid "(on this machine)"
msgstr "(na ovom računalu)"

#: ../../printer.pm_.c:1122
#, c-format
msgid "On CUPS server \"%s\""
msgstr "Na CUPS poslužitelju \"%s\""

#: ../../printer.pm_.c:1128 ../../printerdrake.pm_.c:3071
#: ../../printerdrake.pm_.c:3082 ../../printerdrake.pm_.c:3303
#: ../../printerdrake.pm_.c:3355 ../../printerdrake.pm_.c:3381
#: ../../printerdrake.pm_.c:3556 ../../printerdrake.pm_.c:3558
msgid " (Default)"
msgstr " (Uobičajeno)"

#: ../../printerdrake.pm_.c:25
msgid "Select Printer Connection"
msgstr "Odaberite vezu pisača"

#: ../../printerdrake.pm_.c:26
msgid "How is the printer connected?"
msgstr "Kako je pisač povezan?"

#: ../../printerdrake.pm_.c:28
msgid ""
"\n"
"Printers on remote CUPS servers you do not have to configure here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"Pisače na udaljenom CUPS poslužitelju ne morate konfiguriratiovdje; ti "
"pisači će biti automatski pronađeni."

#: ../../printerdrake.pm_.c:36
msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""

#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:3135
msgid "CUPS configuration"
msgstr "CUPS postavke"

#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:3136
msgid "Specify CUPS server"
msgstr "Odredi CUPS poslužitelj"

#: ../../printerdrake.pm_.c:86
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"do not have to configure anything; the CUPS servers inform your machine "
"automatically about their printers. All printers currently known to your "
"machine are listed in the \"Remote printers\" section in the main window of "
"Printerdrake. When your CUPS server is not in your local network, you have "
"to enter the CUPS server IP address and optionally the port number to get "
"the printer information from the server, otherwise leave these fields blank."
msgstr ""
"Da bi pristupili pisačima na udaljenim CUPS poslužiteljima u vašoj "
"lokalnojmreži ne morate ništa namještati; CUPS poslužitelji automatski "
"obavještavajuvaše računalo o svojim pisačima. Svi pisači koji su poznati "
"vašem računalusu popisani u \"Udaljeni pisači\" odjeljku glavnog prozora "
"Printerdrakea. Kadavaš CUPS poslužitelj nije u vašoj lokalnoj mreži, morate "
"unesti IP adresuCUPS poslužitelja i, opcionalno, broj porta, da bi dobili "
"informacije o pisačuod poslužitelja. Inače, ostavite ova polja praznima."

#: ../../printerdrake.pm_.c:87
msgid ""
"\n"
"Normally, CUPS is automatically configured according to your network "
"environment, so that you can access the printers on the CUPS servers in your "
"local network. If this does not work correctly, turn off \"Automatic CUPS "
"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
"forget to restart CUPS afterwards (command: \"service cups restart\")."
msgstr ""
"\n"
"Obično, CUPS se automatski namješta prema vašem mrežnom okružju, tako "
"damožete pristupiti pisačima na CUPS poslužiteljima u vašoj lokalnoj mreži."
"Ako ovo ne radi dobro, isključite \"Automatsku CUPS konfiguraciju\" i "
"uredite datoteku /etc/cups/cupsd.conf ručno. Nemojte zaboraviti poslije "
"ponovnopokrenuti CUPS (naredba:\"service cups restart\")."

#: ../../printerdrake.pm_.c:91
msgid "The IP address should look like 192.168.1.20"
msgstr "IP adresa treba izgledati poput 192.168.1.20"

#: ../../printerdrake.pm_.c:95 ../../printerdrake.pm_.c:1094
msgid "The port number should be an integer!"
msgstr "Broj porta bi trebao biti cjelobrojni broj!"

#: ../../printerdrake.pm_.c:102
msgid "CUPS server IP"
msgstr "IP CUPS poslužitelja"

#: ../../printerdrake.pm_.c:103 ../../printerdrake.pm_.c:1114
msgid "Port"
msgstr "Port"

#: ../../printerdrake.pm_.c:105
msgid "Automatic CUPS configuration"
msgstr "Automatska CUPS konfiguracija"

#: ../../printerdrake.pm_.c:177 ../../printerdrake.pm_.c:247
#: ../../printerdrake.pm_.c:1529 ../../printerdrake.pm_.c:1533
#: ../../printerdrake.pm_.c:1651 ../../printerdrake.pm_.c:2203
#: ../../printerdrake.pm_.c:2356 ../../printerdrake.pm_.c:2415
#: ../../printerdrake.pm_.c:2488 ../../printerdrake.pm_.c:2509
#: ../../printerdrake.pm_.c:2699 ../../printerdrake.pm_.c:2740
#: ../../printerdrake.pm_.c:2745 ../../printerdrake.pm_.c:2779
#: ../../printerdrake.pm_.c:2784 ../../printerdrake.pm_.c:2821
#: ../../printerdrake.pm_.c:2874 ../../printerdrake.pm_.c:2894
#: ../../printerdrake.pm_.c:2908 ../../printerdrake.pm_.c:2942
#: ../../printerdrake.pm_.c:2988 ../../printerdrake.pm_.c:3006
#: ../../printerdrake.pm_.c:3095 ../../printerdrake.pm_.c:3169
#: ../../printerdrake.pm_.c:3471 ../../printerdrake.pm_.c:3526
#: ../../printerdrake.pm_.c:3579 ../../standalone/printerdrake_.c:57
msgid "Printerdrake"
msgstr "Printerdrake"

#: ../../printerdrake.pm_.c:178
#, fuzzy
msgid "Checking your system..."
msgstr "Ponovno pokrećem ispisni sutav ..."

#: ../../printerdrake.pm_.c:186
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr ""

#: ../../printerdrake.pm_.c:198
#, fuzzy
msgid ""
"The following printers\n"
"\n"
msgstr "Slijedeći paketi će biti uklonjeni"

#: ../../printerdrake.pm_.c:199
#, fuzzy
msgid ""
"The following printer\n"
"\n"
msgstr "Slijedeći paketi će biti uklonjeni"

#: ../../printerdrake.pm_.c:201
msgid ""
"\n"
"and one unknown printer are "
msgstr ""

#: ../../printerdrake.pm_.c:203
#, c-format
msgid ""
"\n"
"and %d unknown printers are "
msgstr ""

#: ../../printerdrake.pm_.c:207
msgid ""
"\n"
"are "
msgstr ""

#: ../../printerdrake.pm_.c:208
msgid ""
"\n"
"is "
msgstr ""

#: ../../printerdrake.pm_.c:210
#, fuzzy
msgid "directly connected to your system"
msgstr "Kopiraj fontove na vaš sustav"

#: ../../printerdrake.pm_.c:213
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""

#: ../../printerdrake.pm_.c:215
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""

#: ../../printerdrake.pm_.c:221
#, fuzzy
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr "Izaberite port na kojem se nalazi pisač."

#: ../../printerdrake.pm_.c:235
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""

#: ../../printerdrake.pm_.c:236
#, fuzzy
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr ""
"Da li želite postaviti ovaj pisač (\"%s\")\n"
"kao podrazumijevani pisač?"

#: ../../printerdrake.pm_.c:238
#, fuzzy
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "Da li želite pokreniti vašu vezu kod svakog podizanja (boot) sustava ?"

#: ../../printerdrake.pm_.c:239
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""

#: ../../printerdrake.pm_.c:240
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""

#: ../../printerdrake.pm_.c:269 ../../printerdrake.pm_.c:278
#: ../../printerdrake.pm_.c:3117 ../../printerdrake.pm_.c:3242
msgid "Add a new printer"
msgstr "Dodaj novi pisač"

#: ../../printerdrake.pm_.c:270
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""
"\n"
"Dobrodošli u Čarobnjak za namještanje pisača\n"
"\n"
"Ovaj čarobnjak vam omogućuje da instalirate lokalne ili udaljene pisače "
"koji\n"
"će se koristiti s ovog računala kao i sa drugih računala u mreži.\n"
"\n"
"Pita vas za sve potrebne informacije za namještanje pisača i daje vam "
"pristupsvim dostupnim pokretačkim programima za pisače, njihovim opcijama i "
"vrstamaveza prema pisačima."

#: ../../printerdrake.pm_.c:280
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) and you Windows machines must be connected and "
"turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you don't need "
"it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" when you do not "
"want to set up your printer(s) now."
msgstr ""

#: ../../printerdrake.pm_.c:289 ../../printerdrake.pm_.c:306
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" when you do not "
"want to set up your printer(s) now."
msgstr ""

#: ../../printerdrake.pm_.c:297
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you don't need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" when you do not "
"want to set up your printer(s) now."
msgstr ""

#: ../../printerdrake.pm_.c:315
#, fuzzy
msgid "Auto-detect printers connected to this machine"
msgstr "Automatski prepoznaj pisač"

#: ../../printerdrake.pm_.c:318
msgid "Auto-detect printers connected directly to the local network"
msgstr ""

#: ../../printerdrake.pm_.c:321
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""

#: ../../printerdrake.pm_.c:348 ../../printerdrake.pm_.c:562
#: ../../printerdrake.pm_.c:587
msgid "Local Printer"
msgstr "Lokalni pisač"

#: ../../printerdrake.pm_.c:349
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
"Center."
msgstr ""
"\n"
"Čestitamo, vaš pisač je sada instaliran i namješten!\n"
"\n"
"Možete pisati korištenjem \"Ispis\" naredbe u vašoj aplikaciji (obično u "
"\"File\" izborniku).\n"
"\n"
"Ako želite dodati, maknuti ili promijeniti ime pisaču, ili želite "
"promijenitipodrazumijevane opcije (ladicu za uvlačenje papira, kakvoću "
"ispisa,...),izaberite \"Pisač\" u \"Hardver\" odjeljku Mandrake kontrolnog "
"centra."

#: ../../printerdrake.pm_.c:386 ../../printerdrake.pm_.c:577
#: ../../printerdrake.pm_.c:790 ../../printerdrake.pm_.c:1030
#, fuzzy
msgid "Printer auto-detection"
msgstr "Koristi auto detekciju"

#: ../../printerdrake.pm_.c:408
#, fuzzy, c-format
msgid ", network printer \"%s\", port %s"
msgstr ", TCP/IP host \"%s\", port %s"

#: ../../printerdrake.pm_.c:410
#, fuzzy, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr "Pisač na SMB/Windows 95/98/NT poslužitelju"

#: ../../printerdrake.pm_.c:416
#, c-format
msgid "Detected %s"
msgstr "Detektirano %s"

#: ../../printerdrake.pm_.c:420 ../../printerdrake.pm_.c:451
#: ../../printerdrake.pm_.c:470
#, c-format
msgid "Printer on parallel port \\/*%s"
msgstr "Pisač na paralelnom portu \\/*%s"

#: ../../printerdrake.pm_.c:422 ../../printerdrake.pm_.c:453
#: ../../printerdrake.pm_.c:475
#, c-format
msgid "USB printer \\/*%s"
msgstr "USB pisač \\/*%s"

#: ../../printerdrake.pm_.c:424
#, fuzzy, c-format
msgid "Network printer \"%s\", port %s"
msgstr "Mrežni pisač (TCP/socket)"

#: ../../printerdrake.pm_.c:426
#, fuzzy, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "Pisač na SMB/Windows 95/98/NT poslužitelju"

#: ../../printerdrake.pm_.c:563
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""
"Nije pronađen nijedan lokalni pisač! Za ručno instaliranje pisača upišiteime "
"uređaja/datoteke u liniju za unos (paralelni portovi:/dev/lp0, /dev/lp1, ...,"
"odgovara LPT1:, LPT2:, ..., prvi USB pisač: /dev/usb/lp0, drugi USB pisač:/"
"dev/usb/lp1, ...)."

#: ../../printerdrake.pm_.c:567
msgid "You must enter a device or file name!"
msgstr "Morate unijeti ime uređaja ili datoteke!"

#: ../../printerdrake.pm_.c:578
#, fuzzy
msgid "No printer found!"
msgstr ""
"Nije pronađen lokalni pisač!\n"
"\n"

#: ../../printerdrake.pm_.c:588
#, fuzzy
msgid "Available printers"
msgstr "Lokalni pisač"

#: ../../printerdrake.pm_.c:592
msgid ""
"The following printer was auto-detected, if it is not the one you want to "
"configure, enter a device name/file name in the input line"
msgstr ""
"Ovaj pisač je prepoznat, ako to nije onaj kojeg želite podešavati, "
"upišiteime uređaja/datoteke u liniju za unos."

#: ../../printerdrake.pm_.c:593
msgid ""
"Here is a list of all auto-detected printers. Please choose the printer you "
"want to set up or enter a device name/file name in the input line"
msgstr ""
"Ovo je popis svih prepoznatih pisača. Izaberite kojeg želite podesitiili "
"upišite ime uređaja/datoteke u liniju za unos"

#: ../../printerdrake.pm_.c:595
msgid ""
"The following printer was auto-detected. The configuration of the printer "
"will work fully automatically. If your printer was not correctly detected or "
"if you prefer a customized printer configuration, turn on \"Manual "
"configuration\"."
msgstr ""
"Ovaj pisač je prepoznat. Namještanje pisača će raditi potpuno automatski.Ako "
"vaš pisač nije ispravno prepoznat ili ako biste radije ručno "
"namještalipisač, uključite \"Ručno namještanje\"."

#: ../../printerdrake.pm_.c:596
msgid ""
"Here is a list of all auto-detected printers. Please choose the printer you "
"want to set up. The configuration of the printer will work fully "
"automatically. If your printer was not correctly detected or if you prefer a "
"customized printer configuration, turn on \"Manual configuration\"."
msgstr ""
"Ovaj je popis svih prepoznatih pisača. Izaberite pisač kojeg želite podesiti."
"Namještanje pisača će raditi potpuno automatski.Ako vaš pisač nije ispravno "
"prepoznat ili ako biste radije ručno namještalipisač, uključite \"Ručno "
"namještanje\"."

#: ../../printerdrake.pm_.c:598
msgid ""
"Please choose the port where your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""
"Izaberite port preko kojeg je vaš pisač povezan ili upišite ime uređaja/"
"datotekeu liniju za unos."

#: ../../printerdrake.pm_.c:599
msgid "Please choose the port where your printer is connected to."
msgstr "Izaberite port na kojem se nalazi pisač."

#: ../../printerdrake.pm_.c:601
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
" (paralelni portovi:/dev/lp0, /dev/lp1, ...,odgovara LPT1:, LPT2:, ..., prvi "
"USB pisač: /dev/usb/lp0, drugi USB pisač: /dev/usb/lp1, ...)."

#: ../../printerdrake.pm_.c:606
msgid "You must choose/enter a printer/device!"
msgstr "Morate izabrati/upisati pisač/uređaj!"

#: ../../printerdrake.pm_.c:626
msgid "Manual configuration"
msgstr "Ručno namještanje"

#: ../../printerdrake.pm_.c:680
msgid "Remote lpd Printer Options"
msgstr "Postavke udaljenog lpd pisača"

#: ../../printerdrake.pm_.c:681
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"Ukoliko želite koristiti udaljeni lpd pisač, morate unijetiime ispisnog "
"poslužitelja te ime pisača na tom poslužitelju."

#: ../../printerdrake.pm_.c:682
msgid "Remote host name"
msgstr "Udaljeno ime računala"

#: ../../printerdrake.pm_.c:683
msgid "Remote printer name"
msgstr "Ime udaljenog pisača"

#: ../../printerdrake.pm_.c:686
msgid "Remote host name missing!"
msgstr "Nedostaje ime računala udaljenog pisača!"

#: ../../printerdrake.pm_.c:690
msgid "Remote printer name missing!"
msgstr "Nedostaje ime udaljenog pisača!"

#: ../../printerdrake.pm_.c:712 ../../printerdrake.pm_.c:1225
#, fuzzy, c-format
msgid "Detected model: %s %s"
msgstr "Detektirano %s"

#: ../../printerdrake.pm_.c:790 ../../printerdrake.pm_.c:1030
#, fuzzy
msgid "Scanning network..."
msgstr "Pokrećem mrežu ..."

#: ../../printerdrake.pm_.c:799 ../../printerdrake.pm_.c:820
#, fuzzy, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr "na Windows poslužitelju \"%s\", dijeli \"%s\""

#: ../../printerdrake.pm_.c:802 ../../printerdrake.pm_.c:823
#, fuzzy, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "Ispis na pisaču \"%s\""

#: ../../printerdrake.pm_.c:843
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "Postavke SMB (Windows 9x/NT) pisača"

#: ../../printerdrake.pm_.c:844
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"Za ispis na SMB pisač, trebate navestiime SMB domaćina (Primjetite da može "
"biti različit od TCP/IP imena računala) i vjerojatno IP adresu ispisnog "
"poslužitelja, kao iime dijeljenog resursa za pisač kojem želite pristupiti i "
"bilo kojeprimjenjivo korisničko ime, lozinku ili informacije o radnoj grupi."

#: ../../printerdrake.pm_.c:845
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""

#: ../../printerdrake.pm_.c:846
msgid "SMB server host"
msgstr "SMB poslužitelj"

#: ../../printerdrake.pm_.c:847
msgid "SMB server IP"
msgstr "IP SMB poslužitelja"

#: ../../printerdrake.pm_.c:848
msgid "Share name"
msgstr "Ime sharea"

#: ../../printerdrake.pm_.c:851
msgid "Workgroup"
msgstr "Radna grupa"

#: ../../printerdrake.pm_.c:853
#, fuzzy
msgid "Auto-detected"
msgstr "Koristi auto detekciju"

#: ../../printerdrake.pm_.c:864
msgid "Either the server name or the server's IP must be given!"
msgstr "Ime poslužitelja ili IP poslužitelja mora biti naveden!"

#: ../../printerdrake.pm_.c:868
msgid "Samba share name missing!"
msgstr "Ime dijeljenog samba resursa nedostaje!"

#: ../../printerdrake.pm_.c:874
msgid "SECURITY WARNING!"
msgstr "SIGURNOSNO UPOZORENJE!"

#: ../../printerdrake.pm_.c:875
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Sada ćete namjestiti ispis na Windows korisničkom računu sa lozinkom. "
"Zboggreške u arhitekturi Samba klijent softvera, lozinka je stavljena u "
"čistomtekstualnom obliku u komandnoj liniji Samba klijenta koji se koristi "
"zaslanje ispisnog posla Windows poslužitelju. Tako je moguće da si svaki "
"korisnikna ovom računalu ispiše lozinku na ekranu izdavanje komandi poput "
"\"psauxwww\".\n"
"\n"
"Preporučamo da iskoristite jednu od slijedećih alternativa (u svim "
"slučajevimamorate provjeriti da samo računala sa vaše lokalne mreže imaju "
"pristup vašemWindows serveru, npr. putem vatrozida):\n"
"\n"
"Koristite korisnički račun bez lozinke na vašem Windows poslužitelju, kao"
"\"GUEST\" račun ili posebni račun određen samo za ispis. Nemojte "
"micatizaštitu lozinkom sa osobnog ili administratorskog računa.\n"
"\n"
"Namjestite vaš Windows poslužitelj da omogućuje pristup pisaču preko "
"lpdprotokola. Zatim namjestite ispis s ovog računala sa \"%s\" tipom veze "
"uPrinterdrakeu.\n"
"\n"

#: ../../printerdrake.pm_.c:885
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Namjestite vaš Windows poslužitelj da omogućuje pristup pisaču preko "
"IPPprotokola i namjestite ispis s ovog računala sa \"%s\" tipom veze u "
"Printerdrakeu.\n"
"\n"

#: ../../printerdrake.pm_.c:888
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
"Povežite vaš pisač na Linux poslužitelj i dopustite da se vaša "
"Windowsračunala povezuju na njega kao klijenti.\n"
"\n"
"Da li stvarno želite nastaviti namještati ovaj pisač kao što činite sada?"

#: ../../printerdrake.pm_.c:960
msgid "NetWare Printer Options"
msgstr "Postavke NetWare pisača"

#: ../../printerdrake.pm_.c:961
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"Za ispis na NetWare pisač, trebate navestiNetWare ime ispisnog poslužitelja "
"(Primjetite da može biti različit odnjegovog TCP/IP imena računala!) kao i "
"ime ispisnog reda za pisač kojimželite pristupiti, te neko primjenjivo "
"korisničko ime i lozinku."

#: ../../printerdrake.pm_.c:962
msgid "Printer Server"
msgstr "Ispisni poslužitelj"

#: ../../printerdrake.pm_.c:963
msgid "Print Queue Name"
msgstr "Ime reda pisača"

#: ../../printerdrake.pm_.c:968
msgid "NCP server name missing!"
msgstr "Ime NCP poslužitelja nedostaje!"

#: ../../printerdrake.pm_.c:972
msgid "NCP queue name missing!"
msgstr "Nedostaje ime NCP reda!"

#: ../../printerdrake.pm_.c:1039 ../../printerdrake.pm_.c:1059
#, fuzzy, c-format
msgid ", host \"%s\", port %s"
msgstr ", TCP/IP host \"%s\", port %s"

#: ../../printerdrake.pm_.c:1042 ../../printerdrake.pm_.c:1062
#, fuzzy, c-format
msgid "Host \"%s\", port %s"
msgstr ", TCP/IP host \"%s\", port %s"

#: ../../printerdrake.pm_.c:1082
msgid "TCP/Socket Printer Options"
msgstr "Opcije TCP/Socket pisača"

#: ../../printerdrake.pm_.c:1084
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) into the input fields."
msgstr ""

#: ../../printerdrake.pm_.c:1085
#, fuzzy
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"Za ispis na TCP ili socket pisač, trebate navestiime poslužitelja pisača te "
"opciono broj porta. Na HP JetDirect poslužiteljimabroj porta je obično 9100, "
"na drugim poslužiteljima može biti drugačije.Pogledajte priručnik vašeg "
"hardvera."

#: ../../printerdrake.pm_.c:1090
#, fuzzy
msgid "Printer host name or IP missing!"
msgstr "Nedostaje ime računala od pisača!"

#: ../../printerdrake.pm_.c:1112
#, fuzzy
msgid "Printer host name or IP"
msgstr "Ime računala od pisača"

#: ../../printerdrake.pm_.c:1160 ../../printerdrake.pm_.c:1162
msgid "Printer Device URI"
msgstr "URI Uređaja pisača"

#: ../../printerdrake.pm_.c:1161
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"Možete izravno odrediti da URI pristupa pisaču. URI mora odgovarati oliCUPS "
"ili Foomatic specifikacijama. Primjetite da nisu svi URI tipovi podržani od "
"svih spoolera."

#: ../../printerdrake.pm_.c:1176
msgid "A valid URI must be entered!"
msgstr "Ispravan URI mora biti unešen!"

#: ../../printerdrake.pm_.c:1515
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"Svaki pisač treba ime (na primjer \"pisač\").Polja opisa i lokacije ne "
"moraju biti popunjena. To su komentari za korisnike."

#: ../../printerdrake.pm_.c:1516
msgid "Name of printer"
msgstr "Ime pisača"

#: ../../printerdrake.pm_.c:1518
msgid "Location"
msgstr "Lokacija"

#: ../../printerdrake.pm_.c:1530 ../../printerdrake.pm_.c:1652
msgid "Reading printer database..."
msgstr "Čitam bazu pisača ..."

#: ../../printerdrake.pm_.c:1534
msgid "Preparing printer database..."
msgstr "Pripremam bazu pisača ..."

#: ../../printerdrake.pm_.c:1631
msgid "Your printer model"
msgstr "Model vašeg pisača"

#: ../../printerdrake.pm_.c:1632
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""
"Printerdrake je usporedio ime modela koje je dobio autodetekcijom s "
"modelimapopisanim u svojoj bazi podataka da bi našao koji najbolje odgovara. "
"Ovaj izbormože biti pogrešan, posebice kada vaš pisač uopće nije u bazi "
"pisača. Zatoprovjerite da li je izbor točan i stisnite \"Model je točan\" "
"ako jest, a ako nestisnite \"Ručno izaberi model\" da bi mogli ručno "
"izabrati model pisačana slijedećem ekranu.\n"
"\n"
"Za vaš pisač Printerdrake je našao:\n"
"\n"
"%s"

#: ../../printerdrake.pm_.c:1637 ../../printerdrake.pm_.c:1640
msgid "The model is correct"
msgstr "Model je točan"

#: ../../printerdrake.pm_.c:1638 ../../printerdrake.pm_.c:1639
#: ../../printerdrake.pm_.c:1642
msgid "Select model manually"
msgstr "Ručno izaberi model"

#: ../../printerdrake.pm_.c:1659
msgid "Printer model selection"
msgstr "Izabir modela pisača"

#: ../../printerdrake.pm_.c:1660
msgid "Which printer model do you have?"
msgstr "Kakav model pisača imate?"

#: ../../printerdrake.pm_.c:1661
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Search the correct model in the list when the cursor is "
"standing on a wrong model or on \"Raw printer\"."
msgstr ""
"\n"
"\n"
"Molim, provjerite da li je Printerdrakeautomatski pronašao vaš model "
"pisačaispravno. Pronađite ispravan model upopisu kada pokazivač pokazuje "
"nakrivi model ili na \"Raw pisač\"."

#: ../../printerdrake.pm_.c:1664
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""
"Ako vaš pisač nije prikazan, izaberite kombatibilni (pogledajte priručnik "
"odpisača) ili neki slični."

#: ../../printerdrake.pm_.c:1741
msgid "OKI winprinter configuration"
msgstr "OKI winprinter konfiguracija"

#: ../../printerdrake.pm_.c:1742
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""
"Namještate OKI laserski winpisač. Ovi pisači koriste dosta poseban\n"
"komunikacijski protokol i stoga će raditi samo ako su spojeni na "
"prviparalelni port. Kada je vaš pisač spojen na drugi port ili na "
"kutijuispisnog poslužitelja spojite ga na prvi paralelni port prije "
"ispisaprobne stranice. Inače pisač neće raditi. Vašu postavu tipa veze "
"pokretačkiprogram će ignorirati."

#: ../../printerdrake.pm_.c:1785 ../../printerdrake.pm_.c:1812
msgid "Lexmark inkjet configuration"
msgstr "Lexmark inkjet konfiguracija"

#: ../../printerdrake.pm_.c:1786
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""
"Pokretački programi za Inkjet pisače od Lexmarka podržavaju samo lokalne "
"pisače,ne pisače na udaljenim računalima ili kutijama ispisnog poslužitelja. "
"Spojitevaš pisač na lokalni port ili ga namjestite na računalu u kojeg je "
"uključen."

#: ../../printerdrake.pm_.c:1813
#, fuzzy
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""
"Da bi mogli ispisivati sa svojim Lexmark inkjetom i ovom postavom, "
"trebateLexmarkove inkjet pokretačke programe za pisače (http://www.lexmark."
"com/).Otiđite na američki site i stisnite na \"Drivers\" dugme. Zatim "
"izaberitevaš model i potom \"Linux\" kao operativni sustav. Pokretački "
"programi dolazekao RPM paketi ili skripte za ljusku sa interaktivnom "
"grafičkom instalacijom.Ne trebate raditi ovu konfiguraciju iz grafičkog "
"sučelja. Odustanite odmahnakon pristajanja na licencu. Zatim ispišite "
"stranice za namještanje glavepisača sa \"lexmarkmaintain\" i podesite "
"postavke za namještanje glave saovim programom."

#: ../../printerdrake.pm_.c:1816
msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
msgstr ""

#: ../../printerdrake.pm_.c:1817
msgid ""
"Your printer belongs to the group of GDI laser printers (winprinters) sold "
"by different manufacturers which uses the Zenographics ZJ-stream raster "
"format for the data sent to the printer. The driver for these printers is "
"still in a very early development stage and so it will perhaps not always "
"work properly. Especially it is possible that the printer only works when "
"you choose the A4 paper size.\n"
"\n"
"Some of these printers, as the HP LaserJet 1000, for which this driver was "
"originally created, need their firmware to be uploaded to them after they "
"are turned on. In the case of the HP LaserJet 1000 you have to search the "
"printer's Windows driver CD or your Windows partition for the file "
"\"sihp1000.img\" and upload the file to the printer with one of the "
"following commands:\n"
"\n"
"     lpr -o raw sihp1000.img\n"
"     cat sihp1000.img > /dev/usb/lp0\n"
"\n"
"The first command can be given by any normal user, the second must be given "
"as root. After having done so you can print normally.\n"
msgstr ""

#: ../../printerdrake.pm_.c:2040
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""
"Podrazumijevane postavke pisača\n"
"\n"
"Trebali biste se uvjeriti da li su veličina stranice, vrsta tinte/"
"načinispisa (ako je dostupan) i hardverske postavke laserskih pisača "
"(memorija,duplex jedinica, dodatne ladice) postavljeni ispravno. Primjetite "
"dasa vrlo velikom kakvoćom ispisa/rezolucijom ispis može znatno usporiti."

#: ../../printerdrake.pm_.c:2049
#, c-format
msgid "Option %s must be an integer number!"
msgstr "Opcija %s mora biti cijeli broj!"

#: ../../printerdrake.pm_.c:2053
#, c-format
msgid "Option %s must be a number!"
msgstr "Opcija %s mora biti broj!"

#: ../../printerdrake.pm_.c:2058
#, c-format
msgid "Option %s out of range!"
msgstr "Opcija %s je izvan dosega!<"

#: ../../printerdrake.pm_.c:2097
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""
"Da li želite postaviti ovaj pisač (\"%s\")\n"
"kao podrazumijevani pisač?"

#: ../../printerdrake.pm_.c:2120
msgid "Test pages"
msgstr "Testne stranice"

#: ../../printerdrake.pm_.c:2121
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""
"Izaberite probne stranice koje želite ispisati.\n"
"Primjetite: foto probna stranica se može vrlo dugo ispisivati, a na "
"laserskimpisačima sa malo memorije i uopće se ne ispisati. U većini "
"slučajeva jedovoljno ispisati standardnu probnu stranicu."

#: ../../printerdrake.pm_.c:2125
msgid "No test pages"
msgstr "Bez testnih stranica"

#: ../../printerdrake.pm_.c:2126
msgid "Print"
msgstr "Ispiši"

#: ../../printerdrake.pm_.c:2183
msgid "Standard test page"
msgstr "Standardna testna stranica"

#: ../../printerdrake.pm_.c:2186
msgid "Alternative test page (Letter)"
msgstr "Alternativna testna stranica (Letter)"

#: ../../printerdrake.pm_.c:2189
msgid "Alternative test page (A4)"
msgstr "Alternativna testna stranica (A4)"

#: ../../printerdrake.pm_.c:2191
msgid "Photo test page"
msgstr "Foto testna stranica"

#: ../../printerdrake.pm_.c:2195
msgid "Do not print any test page"
msgstr "Ne ispiši nikakve probne stranice"

#: ../../printerdrake.pm_.c:2204 ../../printerdrake.pm_.c:2357
msgid "Printing test page(s)..."
msgstr "Ispisujem probnu stranicu(e)..."

#: ../../printerdrake.pm_.c:2229
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Testna/e stranica/e su poslane na pisač.\n"
"Može potrajati neko vrijeme dok ispisivanje ne započne.\n"
"Status ispisa:\n"
"%s\n"
"\n"

#: ../../printerdrake.pm_.c:2233
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"Probna stranica(e) poslana je na pisač.\n"
"Ponekad je potrebno par sekundi prije nego pisač počne s ispisom.\n"

#: ../../printerdrake.pm_.c:2240
msgid "Did it work properly?"
msgstr "Da li je sve radilo ispravno?"

#: ../../printerdrake.pm_.c:2262 ../../printerdrake.pm_.c:3416
msgid "Raw printer"
msgstr "Raw pisač"

#: ../../printerdrake.pm_.c:2288
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""
"Da bi ispisali datoteku iz komandne linije (terminalski prozor) koristiteili "
"komandu \"%s <datoteka>\" ili grafički alat za ispis: \"xpp <datoteka>\"ili "
"\"kprinter <datoteka>\". Grafički alati vam omogućuju da lako izaberetepisač "
"i podesite opcije.\n"

#: ../../printerdrake.pm_.c:2290
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Ove komande možete također koristiti u \"Printing command\" polju dijalogaza "
"ispis mnogih aplikacija, ali ovdje ne stavljate ime datoteke jerdatoteku za "
"ispis dobavlja sama aplikacija.\n"

#: ../../printerdrake.pm_.c:2293 ../../printerdrake.pm_.c:2310
#: ../../printerdrake.pm_.c:2320
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
"\"%s\" komanda dozvoljava da podesite opcije za pojedini posao ispisa.Samo "
"dodajte željene postavke u komandnu liniju, npr. \"%s <datoteka>\"."

#: ../../printerdrake.pm_.c:2296 ../../printerdrake.pm_.c:2336
#, fuzzy, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s\n"
"\n"
msgstr ""
"Da bi saznali o dostupnim opcijama za trenutni pisač pročitajte ili "
"popisprikazan dolje ili stisnite na \"Popis ispisnih opcija\".%s\n"

#: ../../printerdrake.pm_.c:2300
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
"Ovo je popis dostupnih opcija za ispis za trenutni pisač:\n"
"\n"

#: ../../printerdrake.pm_.c:2305 ../../printerdrake.pm_.c:2315
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""
"Da bi ipisali datoteku iz komandne linije (terminalski prozor) "
"koristitekomandu \"%s <datoteka>\".\n"

#: ../../printerdrake.pm_.c:2307 ../../printerdrake.pm_.c:2317
#: ../../printerdrake.pm_.c:2327
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Ovu naredbu možete također koristiti u \"Printing command\" polju "
"dijalogamnogih aplikacija. Ali tamo ne upisujete ime datoteke jer datoteku "
"za ispisdobavlja sama aplikacija.\n"

#: ../../printerdrake.pm_.c:2312 ../../printerdrake.pm_.c:2322
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""
"Da bi dobili popis opcija dostupnih za trenutni pisač stisnite na "
"\"Popisispisnih opcija\"."

#: ../../printerdrake.pm_.c:2325
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""
"Da bi ispisali datoteku iz komandne linije (terminalskog prozora) "
"koristitenaredbu \"%s <datoteka>\" ili \"%s <datoteka>\".\n"

#: ../../printerdrake.pm_.c:2329
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""
"Možete također koristiti grafičko sučelje \"xpdq\" za namještanje opcijai "
"upravljanje poslovima ispisa.\n"
"Ako koristite KDE okružje, imate \"dugme za paniku\", ikonu na radnom stolu,"
"nazvanu \"ZAUSTAVI pisač!\", koja zaustavlja sve poslove ispisa čim "
"jestisnete. Ovo je korisno kad se, npr., zaglavi papir.\n"

#: ../../printerdrake.pm_.c:2333
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""
"\n"
"\"%s\" i \"%s\" naredbe vam također omogućuju da podesite opcije za "
"određeniposao ispisa. Jednostavno dodajte željene postavke u komandnu "
"liniju, npr.\"%s <datoteka>\".\n"

#: ../../printerdrake.pm_.c:2343
#, fuzzy, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr "Ispis/skeniranje na \"%s\""

#: ../../printerdrake.pm_.c:2344
#, c-format
msgid "Printing/Scanning on \"%s\""
msgstr "Ispis/skeniranje na \"%s\""

#: ../../printerdrake.pm_.c:2346
#, fuzzy, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr "Ispis/skeniranje na \"%s\""

#: ../../printerdrake.pm_.c:2347
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "Ispis na pisaču \"%s\""

#: ../../printerdrake.pm_.c:2350 ../../printerdrake.pm_.c:2353
#: ../../printerdrake.pm_.c:2354 ../../printerdrake.pm_.c:2355
#: ../../printerdrake.pm_.c:3400 ../../standalone/drakTermServ_.c:248
#: ../../standalone/drakbackup_.c:1558 ../../standalone/drakbackup_.c:4206
#: ../../standalone/drakbug_.c:130 ../../standalone/drakfont_.c:705
#: ../../standalone/drakfont_.c:1014
msgid "Close"
msgstr "Zatvori"

#: ../../printerdrake.pm_.c:2353
msgid "Print option list"
msgstr "Popis ispisnih opcija"

#: ../../printerdrake.pm_.c:2373
#, fuzzy, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""
"Vaš HP multi-funkcijski uređaj je automatski namješten za skeniranje. "
"Sadamožete skenirati sa \"scanimage\" (\"scanimage -d hp:%s\" da odredite "
"kojiskener, ako ih imate više) iz komandne linije ili s grafičkim sučeljima"
"\"xscanimage\" ili \"xsane\". Ako koristite GIMP, također možete "
"skeniratibiranjem odgovarajuće stavke u \"File\"/\"Acquire\" izborniku. "
"Probajte\"man scanimage\" i \"man sane-hp\" u komandnoj liniji za više "
"informacija.\n"
"\n"
"Ne koristite \"scannerdrake\" za ovaj uređaj!"

#: ../../printerdrake.pm_.c:2394
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""

#: ../../printerdrake.pm_.c:2416 ../../printerdrake.pm_.c:2875
#: ../../printerdrake.pm_.c:3170
msgid "Reading printer data..."
msgstr "Čitam podatke o pisaču ..."

#: ../../printerdrake.pm_.c:2436 ../../printerdrake.pm_.c:2464
#: ../../printerdrake.pm_.c:2499
msgid "Transfer printer configuration"
msgstr "Prebaci postavke pisača"

#: ../../printerdrake.pm_.c:2437
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
"Možete preslikati postavke pisača koje ste napravili za spooler %s na %s,vaš "
"trenutni spooler. Svi konfiguracijski podaci (ime pisača, opis, lokacija,"
"vrsta veze i podrazumijevane opcije) su preuzeti, ali ne i poslovi.\n"
"Ne mogu se svi redovi prebaciti zbog:\n"

#: ../../printerdrake.pm_.c:2440
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""
"CUPS ne podržava pisače na Novell poslužiteljima ili pisače koji "
"šaljupodatke u naredbu slobodne forme.\n"

#: ../../printerdrake.pm_.c:2442
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""
"PDQ podržava samo lokalne pisače, udaljene LPD pisače i socket/TCPpisače.\n"

#: ../../printerdrake.pm_.c:2444
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "LPD i LPRng ne podržavaju IPP pisače.\n"

#: ../../printerdrake.pm_.c:2446
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""
"Uz to, ovaj program ne može stvarati redove ili \"foomatic-configure\" sene "
"može prebaciti."

#: ../../printerdrake.pm_.c:2447
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""
"\n"
"Također, pisači podešeni sa PPD datotekama od svog proizvođača ili sanative "
"CUPS pokretačkim programima se ne mogu prebaciti."

#: ../../printerdrake.pm_.c:2448
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"Označite pisače koje želite prebaciti i stisnite \"Prebaci\"."

#: ../../printerdrake.pm_.c:2451
msgid "Do not transfer printers"
msgstr "Ne prebacuj pisače"

#: ../../printerdrake.pm_.c:2452 ../../printerdrake.pm_.c:2469
msgid "Transfer"
msgstr "Prebaci"

#: ../../printerdrake.pm_.c:2465
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""
"Pisač \"%s\" već postoji na %s.\n"
"Stisnite \"Prebaci\" da prepišete preko njega.\n"
"Možete i upisati novo ime ili preskočiti ovaj pisač."

#: ../../printerdrake.pm_.c:2473
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "Ime pisača može sadržavati samo slova, brojeve i podvlaku"

#: ../../printerdrake.pm_.c:2478
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""
"Pisač \"%s\" već postoji,\n"
"da li zaista želite prepisati njegovu konfiguraciju?"

#: ../../printerdrake.pm_.c:2486
msgid "New printer name"
msgstr "Novo ime pisača"

#: ../../printerdrake.pm_.c:2489
#, c-format
msgid "Transferring %s..."
msgstr "Prebacujem %s ..."

#: ../../printerdrake.pm_.c:2500
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""
"Prebacili ste vaš bivši podrazumijevani pisač(\"%s\"), da li bi trebao "
"bitipodrazumijevani pisač i u novom sustavu %s?"

#: ../../printerdrake.pm_.c:2510
msgid "Refreshing printer data..."
msgstr "Osvježavam padatke o pisaču ..."

#: ../../printerdrake.pm_.c:2518 ../../printerdrake.pm_.c:2590
#: ../../printerdrake.pm_.c:2602
msgid "Configuration of a remote printer"
msgstr "Postavke udaljenog pisača"

#: ../../printerdrake.pm_.c:2519
msgid "Starting network..."
msgstr "Pokrećem mrežu ..."

#: ../../printerdrake.pm_.c:2554 ../../printerdrake.pm_.c:2558
#: ../../printerdrake.pm_.c:2560
msgid "Configure the network now"
msgstr "Podesi mrežu"

#: ../../printerdrake.pm_.c:2555
msgid "Network functionality not configured"
msgstr "Mreža nije podešena"

#: ../../printerdrake.pm_.c:2556
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""
"Sada ćete podesiti udaljeni pisač. Zahtjeva ispravni pristup mreži, aliona "
"još nije podešena. Ako nastavite bez ispravne mreže, nećete moćikoristiti "
"pisač kojeg sada podešavate. Kako želite nastaviti?"

#: ../../printerdrake.pm_.c:2559
msgid "Go on without configuring the network"
msgstr "Nastavi bez podešavanja mreže"

#: ../../printerdrake.pm_.c:2592
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network gets accessable after booting your "
"system and correct the configuration using the Mandrake Control Center, "
"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
"printer, also using the Mandrake Control Center, section \"Hardware\"/"
"\"Printer\""
msgstr ""
"Postava mreže napravljena tijekom instalacije se ne može sada pokrenuti."
"Provjerite da li je mreža dostupna poslije pokretanja sustava i "
"ispravitepostavke korištenjem Mandrake kontrolnog centra, odjeljak \"Mreža i "
"Internet\"/\"Veza\", i poslije podesite pisač, također iz Mandrake "
"kontrolnog centra,odjeljak \"Hardver\"/\"Pisač\""

#: ../../printerdrake.pm_.c:2593
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""
"Mreža nije pokrenuta. Provjerite postavke i hardver. Zatim probajte "
"ponovnopodesiti vaš udaljeni pisač."

#: ../../printerdrake.pm_.c:2603
msgid "Restarting printing system..."
msgstr "Ponovno pokrećem ispisni sutav ..."

#: ../../printerdrake.pm_.c:2641
msgid "high"
msgstr "Visoka"

#: ../../printerdrake.pm_.c:2641
msgid "paranoid"
msgstr "Paranoidna"

#: ../../printerdrake.pm_.c:2642
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr "Instaliram ispisni sustav s %s sigurnosnom razinom."

#: ../../printerdrake.pm_.c:2643
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessable by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""
"Sada ćete instalirati ispisni sustav %s na sustav koji radi pod %s "
"sigurnosnomrazinom.\n"
"Ovaj ispisni sustav pokreće daemon (pozadinski proces) koji čeka na "
"posloveispisa i rješava ih. Ovaj daemon je dostupan i udaljenim računalima "
"prekomreže, te je tako moguće mjesto napada. Stoga se na ovoj sigurnosnoj "
"razinisamo nekoliko izabranih daemona podrazumijevano pokreće.\n"
"\n"
"Da li stvarno želite namjestiti ispisivanje na ovom računalu?"

#: ../../printerdrake.pm_.c:2675
msgid "Starting the printing system at boot time"
msgstr "Pokretanje ispisnog sustava prilikom podizanja sustava"

#: ../../printerdrake.pm_.c:2676
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""
"Ispisni sustav (%s) se neće automatski pokretati kada se računalu pokrene.\n"
"\n"
"Moguće je da je automatsko pokretanje isključeno zbog prebacivanja na "
"višusigurnosnu razinu, jer je ispisni sustav moguća točka napada.\n"
"\n"
"Želite li ponovno uključiti automatsko podizanje ispisnog sustava?"

#: ../../printerdrake.pm_.c:2700 ../../printerdrake.pm_.c:2741
#: ../../printerdrake.pm_.c:2780 ../../printerdrake.pm_.c:2822
#: ../../printerdrake.pm_.c:2943
msgid "Checking installed software..."
msgstr "Provjeravam instalirani softver..."

#: ../../printerdrake.pm_.c:2746
msgid "Removing LPRng..."
msgstr "Uklanjam LPRng..."

#: ../../printerdrake.pm_.c:2785
msgid "Removing LPD..."
msgstr "Uklanjam LPD..."

#: ../../printerdrake.pm_.c:2858
msgid "Select Printer Spooler"
msgstr "Odaberite spooler pisača"

#: ../../printerdrake.pm_.c:2859
msgid "Which printing system (spooler) do you want to use?"
msgstr "Koji ispisni sustav (spooler) želite koristiti?"

#: ../../printerdrake.pm_.c:2895
#, fuzzy, c-format
msgid "Configuring printer \"%s\"..."
msgstr "Podešavam pisač \"%s\" ..."

#: ../../printerdrake.pm_.c:2909
msgid "Installing Foomatic..."
msgstr "Instaliram Foomatic ..."

#: ../../printerdrake.pm_.c:2979 ../../printerdrake.pm_.c:3020
#: ../../printerdrake.pm_.c:3417 ../../printerdrake.pm_.c:3490
msgid "Printer options"
msgstr "Postavke pisača"

#: ../../printerdrake.pm_.c:2989
#, fuzzy
msgid "Preparing Printerdrake..."
msgstr "Pripremam PrinterDrake ..."

#: ../../printerdrake.pm_.c:3007 ../../printerdrake.pm_.c:3580
msgid "Configuring applications..."
msgstr "Podešavam aplikacije..."

#: ../../printerdrake.pm_.c:3027
msgid "Would you like to configure printing?"
msgstr "Da li želite podesiti ispisivanje?"

#: ../../printerdrake.pm_.c:3039
msgid "Printing system: "
msgstr "Ispisni sustav:"

#: ../../printerdrake.pm_.c:3099
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; to view information about it; "
"or to make a printer on a remote CUPS server available for Star Office/"
"OpenOffice.org/GIMP."
msgstr ""
"Navedeni pisači su podešeni. Dvostruko kliknite na pisač da bi mu "
"promijenilipostavke; da bi ga odredili za podrazumijevani pisač; da bi "
"pogledali informacijeo njemu; ili da bi pisač sa udaljenog CUPS poslužitelja "
"učinili dostupnimStarOfficeu/OpenOffice.org/GIMPu."

#: ../../printerdrake.pm_.c:3100
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it."
msgstr ""
"Navedeni pisači su podešeni. Dvostruko kliknite na pisač da bi mu "
"promijenilipostavke; da ga odredite za podrazumijevani pisač; ili da bi "
"pogledaliinformacije o njemu."

#: ../../printerdrake.pm_.c:3127
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr "Osvježi popis pisača (za prikaz svih dostupnih udaljenih CUPS pisača)"

#: ../../printerdrake.pm_.c:3145
msgid "Change the printing system"
msgstr "Promijeni ispisni sustav"

#: ../../printerdrake.pm_.c:3150 ../../standalone/drakconnect_.c:277
msgid "Normal Mode"
msgstr "Normalni mod"

#: ../../printerdrake.pm_.c:3310 ../../printerdrake.pm_.c:3360
#: ../../printerdrake.pm_.c:3573
msgid "Do you want to configure another printer?"
msgstr "Želite li podesiti neki drugi pisač?"

#: ../../printerdrake.pm_.c:3395
msgid "Modify printer configuration"
msgstr "Promijeni postavke pisača"

#: ../../printerdrake.pm_.c:3397
#, c-format
msgid ""
"Printer %s\n"
"What do you want to modify on this printer?"
msgstr ""
"Pisač %s\n"
"Što želite promijeniti na ovom pisaču?"

#: ../../printerdrake.pm_.c:3401
msgid "Do it!"
msgstr "Napravi!"

#: ../../printerdrake.pm_.c:3406 ../../printerdrake.pm_.c:3461
msgid "Printer connection type"
msgstr "Vrsta veze s pisačem"

#: ../../printerdrake.pm_.c:3407 ../../printerdrake.pm_.c:3465
msgid "Printer name, description, location"
msgstr "Ime pisača, opis, lokacija"

#: ../../printerdrake.pm_.c:3409 ../../printerdrake.pm_.c:3483
msgid "Printer manufacturer, model, driver"
msgstr "Proizvođač pisača, model, pokretački program"

#: ../../printerdrake.pm_.c:3410 ../../printerdrake.pm_.c:3484
msgid "Printer manufacturer, model"
msgstr "Proizvođač pisača, model"

#: ../../printerdrake.pm_.c:3419 ../../printerdrake.pm_.c:3494
msgid "Set this printer as the default"
msgstr "Odredi ovaj pisač za podrazumijevani"

#: ../../printerdrake.pm_.c:3421 ../../printerdrake.pm_.c:3499
msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr "Dodaj ovaj pisač StarOfficeu/OpenOffice.org/GIMPu"

#: ../../printerdrake.pm_.c:3422 ../../printerdrake.pm_.c:3508
msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr "Ukloni ovaj pisač iz StarOfficea/OpenOffice.org/GIMPa"

#: ../../printerdrake.pm_.c:3423 ../../printerdrake.pm_.c:3517
msgid "Print test pages"
msgstr "Ispiši probne stranice"

#: ../../printerdrake.pm_.c:3424 ../../printerdrake.pm_.c:3519
msgid "Know how to use this printer"
msgstr "Saznajte kako koristiti ovaj pisač"

#: ../../printerdrake.pm_.c:3426 ../../printerdrake.pm_.c:3521
msgid "Remove printer"
msgstr "Ukloni pisač"

#: ../../printerdrake.pm_.c:3472
#, fuzzy, c-format
msgid "Removing old printer \"%s\"..."
msgstr "Uklanjam stari pisač \"%s\" ..."

#: ../../printerdrake.pm_.c:3497
msgid "Default printer"
msgstr "Podrazumijevani pisač"

#: ../../printerdrake.pm_.c:3498
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "Pisač \"%s\" je sada određen za podrazumijevani."

#: ../../printerdrake.pm_.c:3502 ../../printerdrake.pm_.c:3505
msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr "Dodavanje pisača StarOfficeu/OpenOffice.org/GIMPu"

#: ../../printerdrake.pm_.c:3503
#, c-format
msgid ""
"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr "Pisač \"%s\" je uspješno dodan StarOfficeu/OpenOffice.org/GIMPu."

#: ../../printerdrake.pm_.c:3506
#, c-format
msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr "Nisam uspio dodati \"%s\" StarOfficeu/OpenOffice.org/GIMPu."

#: ../../printerdrake.pm_.c:3511 ../../printerdrake.pm_.c:3514
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr "Uklanjam pisač iz StarOfficea/OpenOffice.org/GIMPa"

#: ../../printerdrake.pm_.c:3512
#, c-format
msgid ""
"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
"GIMP."
msgstr "Pisač \"%s\" je uspješno uklonjen iz StarOfficea/OpenOffice.org/GIMPa."

#: ../../printerdrake.pm_.c:3515
#, c-format
msgid ""
"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr "Nisam uspio ukloniti pisač \"%s\" iz StarOfficea/OpenOffice.org/GIMPa."

#: ../../printerdrake.pm_.c:3523
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "Da li stvarno želite ukloniti pisač \"%s\"?"

#: ../../printerdrake.pm_.c:3527
#, fuzzy, c-format
msgid "Removing printer \"%s\"..."
msgstr "Uklanjam pisač \"%s\" ..."

#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
#: ../../proxy.pm_.c:78
msgid "Proxy configuration"
msgstr "Postava proxy-a"

#: ../../proxy.pm_.c:30
msgid ""
"Welcome to the proxy configuration utility.\n"
"\n"
"Here, you'll be able to set up your http and ftp proxies\n"
"with or without login and password\n"
msgstr ""
"Dobro došli u pomoćni program za konfiguriranje proxy-a.\n"
"\n"
"Ovdje ćete moći postaviti vaš http i ftp proxi-e\n"
"sa ili bez logina i lozinke\n"

#: ../../proxy.pm_.c:38
msgid ""
"Please fill in the http proxy informations\n"
"Leave it blank if you don't want an http proxy"
msgstr ""
"Molimo popunite http proxy informacije\n"
"Molimo ostavite prazno ukoliko ne želite http proxy"

#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
msgid "URL"
msgstr "URL"

#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
msgid "port"
msgstr "port"

#: ../../proxy.pm_.c:44
msgid "Url should begin with 'http:'"
msgstr "Url treba početi sa 'http:'"

#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
msgid "The port part should be numeric"
msgstr "Broj porta bi trebao biti numerički"

#: ../../proxy.pm_.c:59
msgid ""
"Please fill in the ftp proxy informations\n"
"Leave it blank if you don't want an ftp proxy"
msgstr ""
"Molimo unesite ftp proxy informacije\n"
"Ostavite prazno ukoliko ne želite ftp proxy"

#: ../../proxy.pm_.c:65
#, fuzzy
msgid "Url should begin with 'ftp:' or 'http:'"
msgstr "Url treba početi sa 'http:'"

#: ../../proxy.pm_.c:79
msgid ""
"Please enter proxy login and password, if any.\n"
"Leave it blank if you don't want login/passwd"
msgstr ""
"Molimo unesite proxy login i lozinku ukoliko postoje.\n"
"Ostavite prazno ako ne želite login/lozinku"

#: ../../proxy.pm_.c:80
msgid "login"
msgstr "login"

#: ../../proxy.pm_.c:82
msgid "password"
msgstr "lozinka"

#: ../../proxy.pm_.c:84
msgid "re-type password"
msgstr "ponovno unesite lozinku"

#: ../../proxy.pm_.c:88
msgid "The passwords don't match. Try again!"
msgstr "Lozinke se ne podudaraju. Pokušajte ponovno!"

#: ../../raid.pm_.c:35
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Ne mogu dodati particiju na _formatirani_ RAID md%d"

#: ../../raid.pm_.c:108
#, c-format
msgid "Can't write file %s"
msgstr "Ne mogu pisati u datoteku %s"

#: ../../raid.pm_.c:137
msgid "mkraid failed"
msgstr "mkraid nije uspio"

#: ../../raid.pm_.c:137
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid nije uspio (možda niste instalirali raidtools alate?)"

#: ../../raid.pm_.c:153
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Nema dovoljno particija za RAID nivo %d\n"

#: ../../services.pm_.c:14
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "Pokreni ALSA (Naprednu Linux Zvučnu Arhitekturu) zvučni sustav"

#: ../../services.pm_.c:15
msgid "Anacron a periodic command scheduler."
msgstr "Anacron periodno zakazivanje komandi"

#: ../../services.pm_.c:16
msgid ""
"apmd is used for monitoring batery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd služi za monitoriranje statusa i baterije i njegovo logiranje putem "
"syslog-a.\n"
"Također može biti korišten za gašenje računala kada je baterija slaba."

#: ../../services.pm_.c:18
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Pokreće komande zakazane sa at komandom u specifirano vrijeme kada\n"
"je at pokrenut, i pokreće batch komande kada je prosječna zauzetost dovoljno "
"niska."

#: ../../services.pm_.c:20
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron je standardan UNIX program koji pokreće korisnički definirane programe\n"
"u periodično zakazana vremena. vixie cron dodaje veliki broj korisnih "
"funkcija običnom UNIX cron-u, uključujući bolju sigurnost i veću snagu "
"konfiguracijskih opcija."

#: ../../services.pm_.c:23
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM dodaje podršku za mišu tekst baziranim Linux aplikacijama kao što je\n"
"Midnight Commander. Također pruža miš baziranim konzolama odreži-i-zalijepi "
"operacije,\n"
"i uključuje podršku za iskočive menije u konzoli."

#: ../../services.pm_.c:26
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake pokreće isprobavanje hardware-a, i opciono konfigurira\n"
"novi/promjenjeni hardware."

#: ../../services.pm_.c:28
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache je World Wide Web poslužitelj. Koristi se za posluživanje HTML\n"
"dokumenata i CGI skripti."

#: ../../services.pm_.c:29
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Internet superserver demon (najčešće zvan inetd) pokreće \n"
"razne druge internet servise po potrebi. Odgovoran je za pokretanje \n"
"mnogo servisa, uključujući telnet, ftp, rsh, i rlogin. Isključivanje inetd-"
"a\n"
"onemogučuje sve servise za koje je zadužen."

#: ../../services.pm_.c:33
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"Pokreće paketno filtriranje za Linux kernel 2.2 serije, za postavljanje\n"
"vatrozida za zaštitu vašeg računala od mrežnih napada."

#: ../../services.pm_.c:35
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Ovaj paket učitava odabranu tastaturnu mapu kao što je postavljenu u\n"
"/etc/sysconfig/keyboard. Ona se može odabrati koristeći kbdconfig alat.\n"
"Trebali biste ostaviti ovo uključeno za većinu računala."

#: ../../services.pm_.c:38
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"Automatsko regeneriranje kernel header-a u /boot za\n"
"/usr/include/linux/{autoconf,version}.h"

#: ../../services.pm_.c:40
msgid "Automatic detection and configuration of hardware at boot."
msgstr "Automatska detekcija i konfiguracija hardware-a pri podizanju."

#: ../../services.pm_.c:41
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""
"Linuxconf će ponekada urediti izvršavanje raznih radnji\n"
"pri samom podizanju kako bi održao sustavsku konfiguraciju."

#: ../../services.pm_.c:43
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd je daemon za ispis koji je potreban od lpr-a kako bi radio ispravno.\n"
"On je pojednostavljeno poslužitelj koji šalje ispisne poslove pisaču(ima)."

#: ../../services.pm_.c:45
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"Linux Virtualni Poslužitelj, koristi se za pravljenje visoko raspoloživog\n"
"poslužitelja visokih performansi."

#: ../../services.pm_.c:47
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"named (BIND) je Domain Name Server (DNS) poslužitelj koji se upotrebljava\n"
"za razlučivanje imena računala u IP adrese."

#: ../../services.pm_.c:48
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Montira i Demontira sve Mrežne datotečne sustave (NFS), SMB (Lan\n"
"Manager/Windows), i NCP (NetWare) točke montiranja."

#: ../../services.pm_.c:50
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Aktivira/Deaktivira sva podešena mrežna sučelja prilikom pokretanja\n"
"sustava."

#: ../../services.pm_.c:52
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mreža.\n"
"Ovaj servis pruža NFS poslužiteljsku funkcionalnost, koji se konfigurira\n"
"putem /etc/exports datoteke."

#: ../../services.pm_.c:55
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mreža.\n"
"Ovaj servis pruža funkcionalnost NFS datotečnog zaključavanja."

#: ../../services.pm_.c:57
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""
"Automatski uključuje numlock tipku u konzoli i\n"
"XFree-u pri podizanju."

#: ../../services.pm_.c:59
msgid "Support the OKI 4w and compatible winprinters."
msgstr "Podržava OKI 4w i kompaktibilne win pisače."

#: ../../services.pm_.c:60
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA podrška je obično za podržavanje stvari poput ethernet i\n"
"modema u laptopima. Ona neće biti pokrenuta ukoliko nije tako\n"
" konfigurirana zato je sigurno pokrenuti ju iako na instaliranom\n"
" računalu ne treba."

#: ../../services.pm_.c:63
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmapper uređuje RPC vezama, koje su korištene u protokolima\n"
"poput NFS-a ili NIS-a. Portmap poslužitelj mora biti pokrenut na računalima\n"
"koji su poslužitelji za protokole koji se služe RPC mehanizmima."

#: ../../services.pm_.c:66
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix je Mail Transport Agent, što je program kojišalje mail-ove sa jednog "
"računala na drugo."

#: ../../services.pm_.c:67
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Sprema i vraća sustavsku entropiju za veću kvalitetu generiranja\n"
"slučajnih brojeva."

#: ../../services.pm_.c:69
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle"
msgstr ""
"Dodjeljuje raw uređaje (kao što su hard disk\n"
"particije), za uporabu u aplikacijama kao što su Oracle"

#: ../../services.pm_.c:71
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Routed daemon omogućava automatsku IP ruter tablicu koja se obnavlja\n"
"putem RIP protokola. Dok se RIP najšire koristi na malim mrežama, više "
"kompleksniji\n"
"ruting protokoli su potrebni za kompleksnije mreže."

#: ../../services.pm_.c:74
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"Rstat protokol omogućava korisnicima na mreži da dohvate\n"
"mjerljive performanse za svako računalo koje je na mreži."

#: ../../services.pm_.c:76
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"Rusers protokol omogućava korisnicima na mreži da identificira tko je\n"
"prijavljen na drugim računalima koja odgovaraju."

#: ../../services.pm_.c:78
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"Rwho protokol omogućava udaljenim korisnicima da dobiju popis svih\n"
"korisnika prijavljenih na računalo na kojima je pokrenut rwho (slično finger-"
"u)."

#: ../../services.pm_.c:80
msgid "Launch the sound system on your machine"
msgstr "Pokreni zvučni sustav na vašem računalu"

#: ../../services.pm_.c:81
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog je resurs kojega koriste mnogi demoni kako bi logirali poruke\n"
"u različite sustavske log datoteke. Dobra je ideja uvijek imati pokrenuti "
"syslog."

#: ../../services.pm_.c:83
msgid "Load the drivers for your usb devices."
msgstr "Učitava upravljačke programe za vaše usb uređaje."

#: ../../services.pm_.c:84
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr "Pokreće X Pismovni Poslužitelj (ovo je nužno za XFree da se pokrene)."

#: ../../services.pm_.c:110 ../../services.pm_.c:152
msgid "Choose which services should be automatically started at boot time"
msgstr "Izaberite koji servisi trebaju biti startani automatski kod boot-a"

#: ../../services.pm_.c:122
msgid "Printing"
msgstr "Ispisujem"

#: ../../services.pm_.c:123
msgid "Internet"
msgstr "Internet"

#: ../../services.pm_.c:126
msgid "File sharing"
msgstr "Dijeljenje datoteka"

#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:1742
msgid "System"
msgstr "Sustav"

#: ../../services.pm_.c:133
msgid "Remote Administration"
msgstr "Udaljeno administriranje"

# ../../share/compssUsers
#: ../../services.pm_.c:141
msgid "Database Server"
msgstr "Poslužitelj baza podataka"

#: ../../services.pm_.c:170
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "Servisi: %d aktiviran za %d registriran"

#: ../../services.pm_.c:186
msgid "Services"
msgstr "Servisi"

#: ../../services.pm_.c:198
msgid "running"
msgstr "pokrećem"

#: ../../services.pm_.c:198
msgid "stopped"
msgstr "zaustavljen"

#: ../../services.pm_.c:212
msgid "Services and deamons"
msgstr "Servisi i daemoni"

#: ../../services.pm_.c:217
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"Nema dodatnih informacija\n"
"o ovom servisu, žalim."

#: ../../services.pm_.c:224
msgid "On boot"
msgstr "Pri pokretanju"

#: ../../services.pm_.c:236
msgid "Start"
msgstr "Pokretanje"

#: ../../services.pm_.c:236
msgid "Stop"
msgstr "Zaustavljanje"

#: ../../share/advertising/01-thanks.pl_.c:9
msgid "Thank you for choosing Mandrake Linux 9.0"
msgstr "Hvala vam što ste izabrali Mandrake Linux 9.0"

#: ../../share/advertising/01-thanks.pl_.c:10
msgid "Welcome to the Open Source world"
msgstr "Dobrodošli u Open Source svijet"

#: ../../share/advertising/01-thanks.pl_.c:11
msgid ""
"The success of MandrakeSoft is based upon the principle of Free Software. "
"Your new operating system is the result of collaborative work on the part of "
"the worldwide Linux Community"
msgstr ""
"Uspjeh MandrakeSofta se temelji na principima slobodnog softvera. Vašnovi "
"operativni sustav je rezultat udruženog rada svjetske Linux zajednice"

#: ../../share/advertising/02-community.pl_.c:9
msgid "Get involved in the Free Software world"
msgstr "Pridružite se svijetu slobodnog softvera"

#: ../../share/advertising/02-community.pl_.c:10
msgid "Want to know more about the Open Source community?"
msgstr ""

#: ../../share/advertising/02-community.pl_.c:11
#, fuzzy
msgid ""
"To share your own knowledge and help build Linux tools, join the discussion "
"forums you'll find on our \"Community\" webpages"
msgstr ""
"Upoznajte Open Source zajednicu i postanite članom. Učite, podučavajte "
"ipomažite drugima učestvovanjem u diskusijama u mnogim forumima koje "
"ćetepronaći na \"Community\" web stranicama"

#: ../../share/advertising/03-internet.pl_.c:9
#, fuzzy
msgid "Get the most from the Internet"
msgstr "Spoji se na Internet"

#: ../../share/advertising/03-internet.pl_.c:10
#, fuzzy
msgid ""
"Mandrake Linux 9.0 has selected the best softwares for you. Surf the Web and "
"view animations with Mozilla and Konqueror, or read your mail and handle "
"your personal information with Evolution and Kmail"
msgstr ""
"Mandrake Linux 9.0 pruža najbolji softver za pristupanje svemu što "
"Internetima za ponuditi: surfajte webom i gledajte animacije sa Mozillom i "
"Koquererom,razmjenjujte emailove i organizirajte vaše osobne informacije sa "
"Evolutionomi Kmailom, i još mnogo toga"

#: ../../share/advertising/04-multimedia.pl_.c:9
msgid "Discover the most up-to-date graphical and multimedia tools!"
msgstr ""

#: ../../share/advertising/04-multimedia.pl_.c:10
msgid "Push multimedia to its limits!"
msgstr ""

#: ../../share/advertising/04-multimedia.pl_.c:11
#, fuzzy
msgid ""
"Mandrake Linux 9.0 enables you to use the very latest software to play audio "
"files, edit and handle your images or photos, and play videos"
msgstr ""
"Mandrake Linux 8.2 vam omogućuje da potpuno ostvarite "
"multimedijalnipotencijal vašeg računala! Koristite najnovije programe za "
"reprodukcijuglazbe i zvučnih datoteka, uređujte i organizirajte slike i "
"fotografije,gledajte TV i video zapise, i još mnogo toga"

#: ../../share/advertising/05-games.pl_.c:9
msgid "Games"
msgstr "Igre"

#: ../../share/advertising/05-games.pl_.c:10
#, fuzzy
msgid ""
"Mandrake Linux 9.0 provides the best Open Source games - arcade, action, "
"strategy, ..."
msgstr ""
"Mandrake Linux 8.2 dolazi sa najboljim Open Source igrama - arkade, akcijske,"
"kartanje, sport, strategije, ..."

#: ../../share/advertising/06-mcc.pl_.c:9 ../../standalone/drakbug_.c:69
msgid "Mandrake Control Center"
msgstr "Mandrake Kontrolni Centar"

#: ../../share/advertising/06-mcc.pl_.c:10
#, fuzzy
msgid ""
"Mandrake Linux 9.0 provides a powerful tool to fully customize and configure "
"your machine"
msgstr ""
"Mandrake Linux 8.2 Kontrolni Centar je mjesto gdje si potpuno "
"možetepodrediti i podesiti vaš Mandrake sustav"

#: ../../share/advertising/07-desktop.pl_.c:9
msgid "User interfaces"
msgstr "Korisnička sučelja"

#: ../../share/advertising/07-desktop.pl_.c:10
msgid ""
"Mandrake Linux 9.0 provides you with 11 user interfaces which can be fully "
"modified: KDE 3, Gnome 2, WindowMaker, ..."
msgstr ""

#: ../../share/advertising/08-development.pl_.c:9
#, fuzzy
msgid "Development simplified"
msgstr "Razvoj"

#: ../../share/advertising/08-development.pl_.c:10
msgid "Mandrake Linux 9.0 is the ultimate development platform"
msgstr ""

#: ../../share/advertising/08-development.pl_.c:11
#, fuzzy
msgid ""
"Use the full power of the GNU gcc 3 compiler as well as the best Open Source "
"development environments"
msgstr ""
"Mandrake Linux 8.2 je najbolja platforma za razvoj aplikacija. Otkrijte moć "
"GNU gcc prevoditelja kao i najbolja Open Source okružja za razvojaplikacija."

#: ../../share/advertising/09-server.pl_.c:9
msgid "Turn your machine into a reliable server"
msgstr ""

#: ../../share/advertising/09-server.pl_.c:10
#, fuzzy
msgid ""
"Transform your machine into a powerful Linux server in a few clicks of your "
"mouse: Web server, mail, firewall, router, file and print server, ..."
msgstr ""
"Učinite od svog računala moćni poslužitelj sa samo nekoliko pritisaka na "
"mišu:Web poslužitelj, email, vatrozid, router, datotečni i ispisni "
"poslužitelj, ..."

#: ../../share/advertising/10-mnf.pl_.c:9
msgid "Optimize your security"
msgstr ""

#: ../../share/advertising/10-mnf.pl_.c:10
msgid ""
"The MandrakeSecurity range includes the Multi Network Firewall product (M.N."
"F.)"
msgstr ""

#: ../../share/advertising/10-mnf.pl_.c:11
msgid ""
"This firewall product includes network features which allow you to fulfill "
"all your security needs"
msgstr ""

#: ../../share/advertising/10-mnf.pl_.c:12
msgid "This product is available on MandrakeStore website"
msgstr ""

#: ../../share/advertising/11-mdkstore.pl_.c:9
msgid "The official MandrakeSoft store"
msgstr ""

#: ../../share/advertising/11-mdkstore.pl_.c:10
#, fuzzy
msgid ""
"Our full range of Linux solutions, as well as special offers on products and "
"other \"goodies\", are available online on our e-store:"
msgstr ""
"Potpun raspon Linux rješenja, kao i posebne ponude proizvoda i 'goodiesa', "
"sudostupni online preko naše e-trgovine"

#: ../../share/advertising/12-mdkstore.pl_.c:9
msgid "Strategic partners"
msgstr ""

#: ../../share/advertising/12-mdkstore.pl_.c:10
msgid ""
"MandrakeSoft works alongside a selection of companies offering professional "
"solutions compatible with Mandrake Linux. A list of these partners is "
"available on the MandrakeStore"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl_.c:9
msgid "Discover MandrakeSoft's training catalogue Linux-Campus"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl_.c:10
msgid ""
"The training program has been created to respond to the needs of both end "
"users and experts (Network and System administrators)"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl_.c:11
msgid "Certify yourself on Linux"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl_.c:12
msgid ""
"Whether you choose to teach yourself online or via our network of training "
"partners, the Linux-Campus catalogue prepares you for the acknowledged LPI "
"certification program (worldwide professional technical certification)"
msgstr ""

#: ../../share/advertising/14-mdkexpert.pl_.c:9
#, fuzzy
msgid "Become a MandrakeExpert"
msgstr "MandrakeExpert"

#: ../../share/advertising/14-mdkexpert.pl_.c:10
msgid ""
"Find the solutions of your problems via MandrakeSoft's online support "
"platform"
msgstr ""

#: ../../share/advertising/14-mdkexpert.pl_.c:11
msgid ""
"Join the MandrakeSoft support teams and the Linux Community online to share "
"your knowledge and help your others by becoming a recognized Expert on the "
"online technical support website:"
msgstr ""

#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:9
#, fuzzy
msgid "MandrakeExpert Corporate"
msgstr "MandrakeExpert"

#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:10
msgid "An online platform to respond to company's specific support needs"
msgstr ""

#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:11
msgid ""
"All incidents will be followed up by a single qualified MandrakeSoft "
"technical expert."
msgstr ""

#: ../../share/advertising/17-mdkclub.pl_.c:9
msgid "Discover MandrakeClub and Mandrake Corporate Club"
msgstr ""

#: ../../share/advertising/17-mdkclub.pl_.c:10
msgid ""
"MandrakeClub and Mandrake Corporate Club were created for business and "
"private users of Mandrake Linux who would like to directly support their "
"favorite Linux distribution while also receiving special privileges. If you "
"enjoy our products, if your company benefits from our products to gain a "
"competititve edge, if you want to support Mandrake Linux development, join "
"MandrakeClub!"
msgstr ""

#: ../../standalone.pm_.c:41
msgid "Installing packages..."
msgstr "Instaliram pakete..."

#: ../../standalone/XFdrake_.c:145
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Molim prvo se odjavite te pritisnite Ctrl-Alt-BackSpace"

#: ../../standalone/XFdrake_.c:149
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "Molim ponovo se logirajte u %s kako bi aktivirali promjenjeno"

#: ../../standalone/drakTermServ_.c:188
#, fuzzy
msgid "Mandrake Terminal Server Configuration"
msgstr "Prebaci postavke pisača"

# ../../share/compssUsers
#: ../../standalone/drakTermServ_.c:203
#, fuzzy
msgid "Enable Server"
msgstr "Poslužitelj baza podataka"

# ../../share/compssUsers
#: ../../standalone/drakTermServ_.c:210
#, fuzzy
msgid "Disable Server"
msgstr "Poslužitelj baza podataka"

#: ../../standalone/drakTermServ_.c:218
#, fuzzy
msgid "Start Server"
msgstr "NIS Poslužitelj"

#: ../../standalone/drakTermServ_.c:225
#, fuzzy
msgid "Stop Server"
msgstr "NIS Poslužitelj"

#: ../../standalone/drakTermServ_.c:233
msgid "Etherboot Floppy/ISO"
msgstr ""

#: ../../standalone/drakTermServ_.c:235
msgid "Net Boot Images"
msgstr ""

#: ../../standalone/drakTermServ_.c:239
#, fuzzy
msgid "Add/Del Users"
msgstr "Dodaj korisnika"

#: ../../standalone/drakTermServ_.c:241
#, fuzzy
msgid "Add/Del Clients"
msgstr "DHCP klijent"

#: ../../standalone/drakTermServ_.c:246 ../../standalone/drakbackup_.c:3928
#: ../../standalone/drakbackup_.c:3961 ../../standalone/drakbackup_.c:3987
#: ../../standalone/drakbackup_.c:4014 ../../standalone/drakbackup_.c:4041
#: ../../standalone/drakbackup_.c:4080 ../../standalone/drakbackup_.c:4101
#: ../../standalone/drakbackup_.c:4128 ../../standalone/drakbackup_.c:4158
#: ../../standalone/drakbackup_.c:4184 ../../standalone/drakbackup_.c:4209
#: ../../standalone/drakfont_.c:700
msgid "Help"
msgstr "Pomoć"

#: ../../standalone/drakTermServ_.c:436
msgid "Boot Floppy"
msgstr ""

#: ../../standalone/drakTermServ_.c:438
msgid "Boot ISO"
msgstr ""

#: ../../standalone/drakTermServ_.c:507
msgid "Build Whole Kernel -->"
msgstr ""

#: ../../standalone/drakTermServ_.c:509 ../../standalone/drakTermServ_.c:539
msgid "This will take a few minutes."
msgstr ""

#: ../../standalone/drakTermServ_.c:521
#, fuzzy
msgid "No kernel selected!"
msgstr "Nema TV kartice!"

#: ../../standalone/drakTermServ_.c:524
msgid "Build Single NIC -->"
msgstr ""

#: ../../standalone/drakTermServ_.c:535
#, fuzzy
msgid "No nic selected!"
msgstr "Nije povezan"

#: ../../standalone/drakTermServ_.c:538
msgid "Build All Kernels -->"
msgstr ""

#: ../../standalone/drakTermServ_.c:552
#, fuzzy
msgid "<-- Delete"
msgstr "Obriši"

#: ../../standalone/drakTermServ_.c:559
#, fuzzy
msgid "Delete All NBIs"
msgstr "Izabrao sve"

#: ../../standalone/drakTermServ_.c:621
#, fuzzy
msgid "Add User -->"
msgstr "Dodaj korisnika"

#: ../../standalone/drakTermServ_.c:629
msgid "<-- Del User"
msgstr ""

#: ../../standalone/drakTermServ_.c:703
msgid "Add Client -->"
msgstr ""

#: ../../standalone/drakTermServ_.c:735
#, fuzzy
msgid "<-- Del Client"
msgstr "DHCP klijent"

#: ../../standalone/drakTermServ_.c:741
#, fuzzy
msgid "dhcpd Config..."
msgstr "Podešavam..."

#: ../../standalone/drakTermServ_.c:870
#, fuzzy
msgid "Write Config"
msgstr "ponovno postavi"

#: ../../standalone/drakTermServ_.c:960
#, fuzzy
msgid "Please insert floppy disk:"
msgstr "Molim, umetnite Boot disketu u pogon %s"

#: ../../standalone/drakTermServ_.c:964
msgid "Couldn't access the floppy!"
msgstr ""

#: ../../standalone/drakTermServ_.c:966
msgid "Floppy can be removed now"
msgstr ""

#: ../../standalone/drakTermServ_.c:969
#, fuzzy
msgid "No floppy drive available!"
msgstr "Disketni pogon nije dostupan"

#: ../../standalone/drakTermServ_.c:978
#, c-format
msgid "Etherboot ISO image is %s"
msgstr ""

#: ../../standalone/drakTermServ_.c:980
msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""

#: ../../standalone/drakTermServ_.c:999
msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""

#: ../../standalone/drakautoinst_.c:43
msgid "Error!"
msgstr "Greška!"

#: ../../standalone/drakautoinst_.c:44
#, c-format
msgid "I can't find needed image file `%s'."
msgstr "Ne mogu naći potrebnu datoteku sa slikom '%s'."

#: ../../standalone/drakautoinst_.c:46
msgid "Auto Install Configurator"
msgstr "Postava automatske instalacije"

#: ../../standalone/drakautoinst_.c:47
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Do you want to continue?"
msgstr ""
"Sada ćete instalirati disketu za automatsku instalaciju. Ova mogućnost "
"jedonekle opasna i mora se oprezno koristiti.\n"
"\n"
"Sa tom mogućnošću, moći ćete ponoviti instalaciju kako ste je proveli naovom "
"računalu, s tim da ćete biti interaktivno priupitani u nekim koracima,da bi "
"promijenili njihove vrijednosti.\n"
"\n"
"Za maksimalnu sigurnost, particioniranje i formatiranje se nikad "
"nećeobavljati automatski, što god izabrali prilikom instalacije na ovo "
"računalo.\n"
"\n"
"Želite li nastaviti?"

#: ../../standalone/drakautoinst_.c:69
msgid "Automatic Steps Configuration"
msgstr "Postava automatskih koraka"

#: ../../standalone/drakautoinst_.c:70
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""
"Izaberite za svaki korak da li će se ponoviti kao i u vašoj instalaciji, "
"iliće se izvoditi ručno"

#: ../../standalone/drakautoinst_.c:81 ../../standalone/drakautoinst_.c:82
#, fuzzy
msgid "Creating auto install floppy"
msgstr "Pravim auto instalacijsku disketu"

#: ../../standalone/drakautoinst_.c:144
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""
"\n"
"Dobrodošli.\n"
"\n"
"Parametri automatske instalacije su dostupni u odjeljku na lijevoj strani"

#: ../../standalone/drakautoinst_.c:239 ../../standalone/drakgw_.c:484
#: ../../standalone/scannerdrake_.c:119
msgid "Congratulations!"
msgstr "Čestitke!"

#: ../../standalone/drakautoinst_.c:240
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""
"Disketa je uspješno stvorena.\n"
"Sada možete ponoviti svoju instalaciju"

#: ../../standalone/drakautoinst_.c:278
msgid "Auto Install"
msgstr "Automatska Instalacija"

#: ../../standalone/drakautoinst_.c:348
msgid "Add an item"
msgstr "Dodaj stavku"

#: ../../standalone/drakautoinst_.c:355
msgid "Remove the last item"
msgstr "Ukloni posljednju stavku"

#: ../../standalone/drakbackup_.c:617
msgid "Cron not available yet as non-root"
msgstr ""

#: ../../standalone/drakbackup_.c:723
msgid "WARNING"
msgstr ""

#: ../../standalone/drakbackup_.c:724
#, fuzzy
msgid "FATAL"
msgstr "FAT"

#: ../../standalone/drakbackup_.c:725
msgid "INFO"
msgstr ""

#: ../../standalone/drakbackup_.c:737
msgid ""
"\n"
"                      DrakBackup Report \n"
"\n"
msgstr ""
"\n"
"                      DrakBackup Report \n"
"\n"

#: ../../standalone/drakbackup_.c:738
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
"\n"
"\n"
msgstr ""
"\n"
"                      DrakBackup Daemon Report\n"
"\n"
"\n"

#: ../../standalone/drakbackup_.c:742
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""
"\n"
"                    DrakBackup Report detalji\n"
"\n"
"\n"

#: ../../standalone/drakbackup_.c:763 ../../standalone/drakbackup_.c:833
#: ../../standalone/drakbackup_.c:887
#, fuzzy
msgid "Total progess"
msgstr "ukupni progres"

#: ../../standalone/drakbackup_.c:815
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"Warning: If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""

#: ../../standalone/drakbackup_.c:824
msgid "This may take a moment to generate the keys."
msgstr ""

#: ../../standalone/drakbackup_.c:831
#, c-format
msgid "ERROR: Cannot spawn %s."
msgstr ""

#: ../../standalone/drakbackup_.c:848
#, c-format
msgid "No password prompt on %s at port %s"
msgstr ""

#: ../../standalone/drakbackup_.c:849
#, fuzzy, c-format
msgid "Bad password on %s"
msgstr "Bez lozinke"

#: ../../standalone/drakbackup_.c:850
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr ""

#: ../../standalone/drakbackup_.c:851
#, fuzzy, c-format
msgid "Can't find %s on %s"
msgstr "Ne mogu otvoriti %s: %s\n"

#: ../../standalone/drakbackup_.c:854
#, c-format
msgid "%s not responding"
msgstr ""

#: ../../standalone/drakbackup_.c:858
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s\\@%s\n"
"\n"
"without being prompted for a password."
msgstr ""

#: ../../standalone/drakbackup_.c:901
msgid "WebDAV remote site already in sync!"
msgstr ""

#: ../../standalone/drakbackup_.c:905
msgid "WebDAV transfer failed!"
msgstr ""

#: ../../standalone/drakbackup_.c:926
msgid "No CDR/DVDR in drive!"
msgstr ""

#: ../../standalone/drakbackup_.c:930
msgid "Does not appear to be recordable media!"
msgstr ""

#: ../../standalone/drakbackup_.c:934
msgid "Not erasable media!"
msgstr ""

#: ../../standalone/drakbackup_.c:973
msgid "This may take a moment to erase the media."
msgstr ""

#: ../../standalone/drakbackup_.c:1058
msgid "Permission problem accessing CD."
msgstr ""

#: ../../standalone/drakbackup_.c:1085
#, c-format
msgid "No tape in %s!"
msgstr ""

#: ../../standalone/drakbackup_.c:1197 ../../standalone/drakbackup_.c:1246
msgid "Backup system files..."
msgstr "Sigurnosna pohrana sustavskih datoteka"

#: ../../standalone/drakbackup_.c:1247 ../../standalone/drakbackup_.c:1314
msgid "Hard Disk Backup files..."
msgstr "Sigurnosna pohrana datoteka na tvrdom disku..."

#: ../../standalone/drakbackup_.c:1259
msgid "Backup User files..."
msgstr "Sigurnosna pohrana korisničkih datoteka"

#: ../../standalone/drakbackup_.c:1260
msgid "Hard Disk Backup Progress..."
msgstr "Progres sigurnosne pohrane tvrdog diska"

#: ../../standalone/drakbackup_.c:1313
msgid "Backup Other files..."
msgstr "Sigurnosna pohrana drugih datoteka"

#: ../../standalone/drakbackup_.c:1319
#, fuzzy
msgid "No changes to backup!"
msgstr "Koristi vrpcu za pohranu"

#: ../../standalone/drakbackup_.c:1335 ../../standalone/drakbackup_.c:1358
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1342
#, fuzzy, c-format
msgid ""
"file list sent by FTP: %s\n"
" "
msgstr ""
"popis datoteka poslan FTPom: %s\n"
" "

#: ../../standalone/drakbackup_.c:1345
#, fuzzy
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""
"\n"
"(!) problem sa FTP vezom: nije bilo moguće poslati vaše pohranjene "
"datotekeFTPom.\n"

#: ../../standalone/drakbackup_.c:1363
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1368
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1377
#, fuzzy
msgid " Error during mail sending. \n"
msgstr "Greška prilikom čitanja datoteke %s"

#: ../../standalone/drakbackup_.c:1402
msgid "Can't create catalog!"
msgstr ""

#: ../../standalone/drakbackup_.c:1515 ../../standalone/drakbackup_.c:1526
#: ../../standalone/drakfont_.c:1004
msgid "File Selection"
msgstr "Odabir datoteka"

#: ../../standalone/drakbackup_.c:1554
msgid "Select the files or directories and click on 'Add'"
msgstr "Izaberi datoteke ili mape i stisni 'Dodaj'"

#: ../../standalone/drakbackup_.c:1598
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""
"\n"
"Provjerite sve opcije koje trebate.\n"

#: ../../standalone/drakbackup_.c:1599
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
"Ove opcije mogu pohraniti i povratiti sve datoteke u vašoj /etc mapi.\n"

#: ../../standalone/drakbackup_.c:1600
#, fuzzy
msgid "Backup your System files. (/etc directory)"
msgstr "Sigurnosno pohranjivanje vaših sustavskih datoteka ( /etc mapa )"

#: ../../standalone/drakbackup_.c:1601
msgid "Use incremental backup  (do not replace old backups)"
msgstr "Koristi inkrementalno pohranjivanje (ne zamjenjuje staru pohranu)"

#: ../../standalone/drakbackup_.c:1602
msgid "Do not include critical files (passwd, group, fstab)"
msgstr "Izostavi kritične datoteke (passwd, group, fstab)"

#: ../../standalone/drakbackup_.c:1603
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr ""
"S ovom opcijom moći ćete povratiti bilo koju inačicu\n"
"vašeg /etc direktorija."

#: ../../standalone/drakbackup_.c:1620
msgid "Please check all users that you want to include in your backup."
msgstr "Odaberite sve korisnike koje želite uključiti u pohranu."

#: ../../standalone/drakbackup_.c:1647
msgid "Do not include the browser cache"
msgstr "Izostavi cache preglednika (browsera)"

#: ../../standalone/drakbackup_.c:1648 ../../standalone/drakbackup_.c:1672
msgid "Use Incremental Backups  (do not replace old backups)"
msgstr "Koristi inkrementalnu pohranu (ne zamjenjuje stare pohrane)"

#: ../../standalone/drakbackup_.c:1670 ../../standalone/drakfont_.c:1058
msgid "Remove Selected"
msgstr "Ukloni izabrano"

#: ../../standalone/drakbackup_.c:1708
msgid "Windows (FAT32)"
msgstr "Windowse (FAT32)"

#: ../../standalone/drakbackup_.c:1747
msgid "Users"
msgstr "Korisnici"

#: ../../standalone/drakbackup_.c:1773
#, fuzzy
msgid "Use network connection to backup"
msgstr "Koristi FTP vezu za pohranu"

#: ../../standalone/drakbackup_.c:1775
msgid "Net Method:"
msgstr ""

#: ../../standalone/drakbackup_.c:1779
msgid "Use Expect for SSH"
msgstr ""

#: ../../standalone/drakbackup_.c:1780
msgid ""
"Create/Transfer\n"
"backup keys for SSH"
msgstr ""

#: ../../standalone/drakbackup_.c:1781
#, fuzzy
msgid ""
"  Transfer  \n"
"Now"
msgstr "Prebaci"

#: ../../standalone/drakbackup_.c:1782
msgid "Keys in place already"
msgstr ""

#: ../../standalone/drakbackup_.c:1786
msgid "Please enter the host name or IP."
msgstr "Upišite ime hosta ili IP."

#: ../../standalone/drakbackup_.c:1791
#, fuzzy
msgid ""
"Please enter the directory (or module) to\n"
" put the backup on this host."
msgstr "Upišite mapu na ovom hostu u koju ćete staviti pohranu."

#: ../../standalone/drakbackup_.c:1796
msgid "Please enter your login"
msgstr "Upišite svoje korisničko ime"

#: ../../standalone/drakbackup_.c:1801
msgid "Please enter your password"
msgstr "Upišite svoju lozinku"

#: ../../standalone/drakbackup_.c:1807
msgid "Remember this password"
msgstr "Zapamti ovu lozinku"

#: ../../standalone/drakbackup_.c:1818
msgid "Need hostname, username and password!"
msgstr ""

#: ../../standalone/drakbackup_.c:1913
msgid "Use CD/DVDROM to backup"
msgstr "Koristi CD/DVDROM za pohranu"

#: ../../standalone/drakbackup_.c:1916
msgid ""
"Please choose your CD/DVD device\n"
"(Press Enter to propogate settings to other fields.\n"
"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""

#: ../../standalone/drakbackup_.c:1921
#, fuzzy
msgid "Please choose your CD/DVD media size"
msgstr "Izaberite prostor na CDu"

#: ../../standalone/drakbackup_.c:1927
#, fuzzy
msgid "Please check for multisession CD"
msgstr "Naznačite da li koristite CDRW medij"

#: ../../standalone/drakbackup_.c:1933
msgid "Please check if you are using CDRW media"
msgstr "Naznačite da li koristite CDRW medij"

#: ../../standalone/drakbackup_.c:1939
#, fuzzy
msgid "Please check if you want to erase your RW media (1st Session)"
msgstr "Naznačite da li prethodno želite obrisati vaš CDRW"

#: ../../standalone/drakbackup_.c:1940
#, fuzzy
msgid " Erase Now "
msgstr "Prebaci"

#: ../../standalone/drakbackup_.c:1946
#, fuzzy
msgid "Please check if you are using a DVDR device"
msgstr "Naznačite da li koristite CDRW medij"

#: ../../standalone/drakbackup_.c:1952
#, fuzzy
msgid "Please check if you are using a DVDRAM device"
msgstr "Naznačite da li koristite CDRW medij"

#: ../../standalone/drakbackup_.c:1965
msgid ""
"Please enter your CD Writer device name\n"
" ex: 0,1,0"
msgstr ""
"Upišite ime vašeg CD snimača\n"
" ex: 0,1,0"

#: ../../standalone/drakbackup_.c:1998
#, fuzzy
msgid "No CD device defined!"
msgstr "Odaberite datoteku"

#: ../../standalone/drakbackup_.c:2046
msgid "Use tape to backup"
msgstr "Koristi vrpcu za pohranu"

#: ../../standalone/drakbackup_.c:2049
msgid "Please enter the device name to use for backup"
msgstr "Upišite ime uređaja kojeg ćete koristiti za sigurnosnu pohranu"

#: ../../standalone/drakbackup_.c:2055
#, fuzzy
msgid "Please check if you want to use the non-rewinding device."
msgstr "Naznačite da li prethodno želite obrisati vaš CDRW"

#: ../../standalone/drakbackup_.c:2061
#, fuzzy
msgid "Please check if you want to erase your tape before the backup."
msgstr "Naznačite da li prethodno želite obrisati vaš CDRW"

#: ../../standalone/drakbackup_.c:2067
#, fuzzy
msgid "Please check if you want to eject your tape after the backup."
msgstr "Naznačite da li prethodno želite obrisati vaš CDRW"

#: ../../standalone/drakbackup_.c:2073 ../../standalone/drakbackup_.c:2147
#: ../../standalone/drakbackup_.c:3114
msgid ""
"Please enter the maximum size\n"
" allowed for Drakbackup"
msgstr ""
"Upišite maksimalnu dozvoljenu\n"
" veličinu za Drakbackup"

#: ../../standalone/drakbackup_.c:2138
#, fuzzy
msgid "Please enter the directory to save to:"
msgstr "Upišite mapu za snimanje:"

#: ../../standalone/drakbackup_.c:2153 ../../standalone/drakbackup_.c:3120
msgid "Use quota for backup files."
msgstr "Koristi quotu za pohranjene datoteke"

#: ../../standalone/drakbackup_.c:2219
msgid "Network"
msgstr "Mreža"

#: ../../standalone/drakbackup_.c:2224
msgid "CDROM / DVDROM"
msgstr "CDROM / DVDROM"

#: ../../standalone/drakbackup_.c:2229
msgid "HardDrive / NFS"
msgstr "Tvrdi disk / NFS"

#: ../../standalone/drakbackup_.c:2234
#, fuzzy
msgid "Tape"
msgstr "Vrsta"

#: ../../standalone/drakbackup_.c:2248 ../../standalone/drakbackup_.c:2252
#: ../../standalone/drakbackup_.c:2256
msgid "hourly"
msgstr "svaki sat"

#: ../../standalone/drakbackup_.c:2249 ../../standalone/drakbackup_.c:2253
#: ../../standalone/drakbackup_.c:2256
msgid "daily"
msgstr "svaki dan"

#: ../../standalone/drakbackup_.c:2250 ../../standalone/drakbackup_.c:2254
#: ../../standalone/drakbackup_.c:2256
msgid "weekly"
msgstr "svaki tjedan"

#: ../../standalone/drakbackup_.c:2251 ../../standalone/drakbackup_.c:2255
#: ../../standalone/drakbackup_.c:2256
msgid "monthly"
msgstr "svaki mjesec"

#: ../../standalone/drakbackup_.c:2269
msgid "Use daemon"
msgstr "Koristi daemon"

#: ../../standalone/drakbackup_.c:2274
msgid ""
"Please choose the time \n"
"interval between each backup"
msgstr ""
"Izaberite vremenski razmak između\n"
"dvije sigurnosne pohrane"

#: ../../standalone/drakbackup_.c:2280
msgid ""
"Please choose the\n"
"media for backup."
msgstr "Izaberite medij za pohranu."

#: ../../standalone/drakbackup_.c:2287
#, fuzzy
msgid ""
"Please be sure that the cron daemon is included in your services. \n"
"\n"
"Note that currently all 'net' medias also use the hard drive."
msgstr "Osigurajte da je cron daemon uključen u vaše servise"

#: ../../standalone/drakbackup_.c:2324
msgid "Send mail report after each backup to:"
msgstr "Ovjde pošalji izvještaj mailom poslije svake pohrane:"

#: ../../standalone/drakbackup_.c:2330
msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""

#: ../../standalone/drakbackup_.c:2369
msgid "What"
msgstr "Što"

#: ../../standalone/drakbackup_.c:2374
msgid "Where"
msgstr "Gdje"

#: ../../standalone/drakbackup_.c:2379
msgid "When"
msgstr "Kada"

#: ../../standalone/drakbackup_.c:2384
msgid "More Options"
msgstr "Još opcija"

#: ../../standalone/drakbackup_.c:2403 ../../standalone/drakbackup_.c:4528
msgid "Drakbackup Configuration"
msgstr "Drakbackup postava"

#: ../../standalone/drakbackup_.c:2421
msgid "Please choose where you want to backup"
msgstr "Izaberite gdje želite pohranjivati"

#: ../../standalone/drakbackup_.c:2423
msgid "on Hard Drive"
msgstr "na tvrdi disk"

#: ../../standalone/drakbackup_.c:2433
msgid "across Network"
msgstr "preko mreže"

#: ../../standalone/drakbackup_.c:2443
msgid "on CDROM"
msgstr ""

#: ../../standalone/drakbackup_.c:2451
msgid "on Tape Device"
msgstr ""

#: ../../standalone/drakbackup_.c:2494
msgid "Please choose what you want to backup"
msgstr "Izaberite što želite pohranjivati"

#: ../../standalone/drakbackup_.c:2495
msgid "Backup system"
msgstr "Pohrani sustav"

#: ../../standalone/drakbackup_.c:2496
msgid "Backup Users"
msgstr "Pohrani korisnike"

#: ../../standalone/drakbackup_.c:2499
msgid "Select user manually"
msgstr "Ručno izaberi korisnika"

#: ../../standalone/drakbackup_.c:2582
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""
"\n"
"Izvori za pohranu: \n"

#: ../../standalone/drakbackup_.c:2583
msgid ""
"\n"
"- System Files:\n"
msgstr ""
"\n"
"- Sustavske datoteke:\n"

#: ../../standalone/drakbackup_.c:2585
msgid ""
"\n"
"- User Files:\n"
msgstr ""
"\n"
"- Korisničke datoteke:\n"

#: ../../standalone/drakbackup_.c:2587
msgid ""
"\n"
"- Other Files:\n"
msgstr ""
"\n"
"- Druge datoteke:\n"

#: ../../standalone/drakbackup_.c:2589
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""
"\n"
"- Snimi na tvrdi disk u putanju: %s\n"

#: ../../standalone/drakbackup_.c:2592
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2598
msgid ""
"\n"
"- Burn to CD"
msgstr ""

#: ../../standalone/drakbackup_.c:2599
msgid "RW"
msgstr ""

#: ../../standalone/drakbackup_.c:2600
#, fuzzy, c-format
msgid " on device: %s"
msgstr "Uređaj miša: %s\n"

#: ../../standalone/drakbackup_.c:2601
msgid " (multi-session)"
msgstr ""

#: ../../standalone/drakbackup_.c:2602
#, fuzzy, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""
"\n"
"Snimi FTPom na host: %s\n"

#: ../../standalone/drakbackup_.c:2603
#, c-format
msgid "\t\tErase=%s"
msgstr ""

#: ../../standalone/drakbackup_.c:2606
#, fuzzy, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""
"\n"
"Snimi FTPom na host: %s\n"

#: ../../standalone/drakbackup_.c:2607
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""
"\t\t korisničko ime: %s\n"
"\t\t u putanju: %s \n"

#: ../../standalone/drakbackup_.c:2608
msgid ""
"\n"
"- Options:\n"
msgstr ""
"\n"
"- Opcije:\n"

#: ../../standalone/drakbackup_.c:2609
msgid "\tDo not include System Files\n"
msgstr "\tIzostavi sustavske datoteke\n"

#: ../../standalone/drakbackup_.c:2612
msgid "\tBackups use tar and bzip2\n"
msgstr "\tPohrana koristi tar i bzip2\n"

#: ../../standalone/drakbackup_.c:2614
msgid "\tBackups use tar and gzip\n"
msgstr "\tPohrana koristi tar i gzip\n"

#: ../../standalone/drakbackup_.c:2617
#, c-format
msgid ""
"\n"
"- Daemon (%s) include:\n"
msgstr ""
"\n"
"- Daemon (%s) uključi :\n"

#: ../../standalone/drakbackup_.c:2618
msgid "\t-Hard drive.\n"
msgstr "\t-Tvrdi disk.\n"

#: ../../standalone/drakbackup_.c:2619
msgid "\t-CDROM.\n"
msgstr "\t-CDROM.\n"

#: ../../standalone/drakbackup_.c:2620
msgid "\t-Tape \n"
msgstr ""

#: ../../standalone/drakbackup_.c:2621
msgid "\t-Network by FTP.\n"
msgstr "\t-Mrežu FTPom.\n"

#: ../../standalone/drakbackup_.c:2622
msgid "\t-Network by SSH.\n"
msgstr "\t-Mrežu SSHom.\n"

#: ../../standalone/drakbackup_.c:2623
#, fuzzy
msgid "\t-Network by rsync.\n"
msgstr "\t-Mrežu FTPom.\n"

#: ../../standalone/drakbackup_.c:2624
#, fuzzy
msgid "\t-Network by webdav.\n"
msgstr "\t-Mrežu FTPom.\n"

#: ../../standalone/drakbackup_.c:2626
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr "Nema postavki, molimo izaberite Čarobnjaka ili Napredno.\n"

#: ../../standalone/drakbackup_.c:2632
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""
"Popis podataka za povrat:\n"
"\n"

#: ../../standalone/drakbackup_.c:2799
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""
"Popis oštećenih podataka:\n"
"\n"

#: ../../standalone/drakbackup_.c:2801
msgid "Please uncheck or remove it on next time."
msgstr "Molimo poništite odabir ili ga uklonite idući put"

#: ../../standalone/drakbackup_.c:2811
msgid "Backup files are corrupted"
msgstr "Pohranjene datoteke su oštećene"

#: ../../standalone/drakbackup_.c:2832
#, fuzzy
msgid "          All of your selected data have been          "
msgstr "          Svi vaši izabrani podaci su              "

#: ../../standalone/drakbackup_.c:2833
#, c-format
msgid "          Successfuly Restored on %s       "
msgstr "          Uspješno povraćeni na %s          "

#: ../../standalone/drakbackup_.c:2951
msgid "         Restore Configuration       "
msgstr "         Povrati postavke          "

#: ../../standalone/drakbackup_.c:2969
msgid "OK to restore the other files."
msgstr "U redu da bi povratili ostale datoteke"

#: ../../standalone/drakbackup_.c:2986
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
"Popis korisnika za povrat (samo je najnoviji nadnevak važan za svakog "
"korisnika)"

#: ../../standalone/drakbackup_.c:3064
msgid "Backup the system files before:"
msgstr "Pohrani sustavske datoteke prije:"

#: ../../standalone/drakbackup_.c:3066
msgid "please choose the date to restore"
msgstr "izaberite nadnevak za povrat"

#: ../../standalone/drakbackup_.c:3103
msgid "Use Hard Disk to backup"
msgstr "Koristi tvrdi disk za pohranu"

#: ../../standalone/drakbackup_.c:3106
msgid "Please enter the directory to save:"
msgstr "Upišite mapu za snimanje:"

#: ../../standalone/drakbackup_.c:3149
msgid "FTP Connection"
msgstr "FTP veza"

#: ../../standalone/drakbackup_.c:3156
msgid "Secure Connection"
msgstr "Sigurna veza"

#: ../../standalone/drakbackup_.c:3182
msgid "Restore from Hard Disk."
msgstr "Povrati s tvrdog diska"

#: ../../standalone/drakbackup_.c:3184
msgid "Please enter the directory where backups are stored"
msgstr "Upišite mapu u koju ste pohranili podatke"

#: ../../standalone/drakbackup_.c:3252
msgid "Select another media to restore from"
msgstr "Izaberite drugi medij s kojeg ćete povratiti podatke"

#: ../../standalone/drakbackup_.c:3254
msgid "Other Media"
msgstr "Ostali mediji"

#: ../../standalone/drakbackup_.c:3259
msgid "Restore system"
msgstr "Povrati sustav"

#: ../../standalone/drakbackup_.c:3260
msgid "Restore Users"
msgstr "Povrati korisnike"

#: ../../standalone/drakbackup_.c:3261
msgid "Restore Other"
msgstr "Povrati ostalo"

#: ../../standalone/drakbackup_.c:3263
#, fuzzy
msgid "select path to restore (instead of /)"
msgstr "izaberi putanju za povrat (umjesto / )"

#: ../../standalone/drakbackup_.c:3267
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""
"Napravi novu sigurnosnu pohranu prije povrata (samo za inkrementalne "
"pohrane.)"

#: ../../standalone/drakbackup_.c:3269
msgid "Remove user directories before restore."
msgstr "Ukloni mape korisnika prije povrata."

#: ../../standalone/drakbackup_.c:3382
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""

#: ../../standalone/drakbackup_.c:3392
#, fuzzy
msgid ""
"Restore Selected\n"
"Files"
msgstr "Ukloni izabrano"

#: ../../standalone/drakbackup_.c:3409
#, fuzzy
msgid ""
"Change\n"
"Restore Path"
msgstr "Povrati ostalo"

#: ../../standalone/drakbackup_.c:3475
#, fuzzy, c-format
msgid "Backup files not found at %s."
msgstr "Pohranjene datoteke su oštećene"

#: ../../standalone/drakbackup_.c:3488
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""

#: ../../standalone/drakbackup_.c:3488
#, fuzzy
msgid "Restore From CD"
msgstr "Povrati s tvrdog diska"

#: ../../standalone/drakbackup_.c:3490
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""

#: ../../standalone/drakbackup_.c:3500
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""

#: ../../standalone/drakbackup_.c:3500
#, fuzzy
msgid "Restore From Tape"
msgstr "Vrati particijsku tabelu"

#: ../../standalone/drakbackup_.c:3502
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""

#: ../../standalone/drakbackup_.c:3522
#, fuzzy
msgid "Restore Via Network"
msgstr "Povrati korisnike"

#: ../../standalone/drakbackup_.c:3522
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr ""

#: ../../standalone/drakbackup_.c:3523
#, fuzzy
msgid "Host Name"
msgstr "Ime računala"

#: ../../standalone/drakbackup_.c:3524
msgid "Host Path or Module"
msgstr ""

#: ../../standalone/drakbackup_.c:3531
#, fuzzy
msgid "Password required"
msgstr "Lozinka"

#: ../../standalone/drakbackup_.c:3537
#, fuzzy
msgid "Username required"
msgstr "Korisničko ime"

#: ../../standalone/drakbackup_.c:3540
#, fuzzy
msgid "Hostname required"
msgstr "Ime računala: "

#: ../../standalone/drakbackup_.c:3545
msgid "Path or Module required"
msgstr ""

#: ../../standalone/drakbackup_.c:3558
msgid "Files Restored..."
msgstr ""

#: ../../standalone/drakbackup_.c:3561
#, fuzzy
msgid "Restore Failed..."
msgstr "Povrati ostalo"

#: ../../standalone/drakbackup_.c:3799
msgid "Restore all backups"
msgstr "Povrati sve pohrane"

#: ../../standalone/drakbackup_.c:3808
msgid "Custom Restore"
msgstr "Prilagođena pohrana"

#: ../../standalone/drakbackup_.c:3854
msgid "CD in place - continue."
msgstr ""

#: ../../standalone/drakbackup_.c:3860
msgid "Browse to new restore repository."
msgstr ""

#: ../../standalone/drakbackup_.c:3863
#, fuzzy
msgid "Restore From Catalog"
msgstr "Vrati particijsku tabelu"

#: ../../standalone/drakbackup_.c:3891
#, fuzzy
msgid "Restore Progress"
msgstr "Povrati korisnike"

#: ../../standalone/drakbackup_.c:3933 ../../standalone/drakbackup_.c:3966
#: ../../standalone/drakbackup_.c:3992 ../../standalone/drakbackup_.c:4019
#: ../../standalone/drakbackup_.c:4046 ../../standalone/drakbackup_.c:4106
#: ../../standalone/drakbackup_.c:4133 ../../standalone/drakbackup_.c:4163
#: ../../standalone/drakbackup_.c:4189
msgid "Previous"
msgstr "Prijašnje"

#: ../../standalone/drakbackup_.c:3937 ../../standalone/drakbackup_.c:4023
#: ../../standalone/logdrake_.c:223
msgid "Save"
msgstr "Snimi"

#: ../../standalone/drakbackup_.c:3996
msgid "Build Backup"
msgstr "Složi sigurnosnu pohranu"

#: ../../standalone/drakbackup_.c:4050 ../../standalone/drakbackup_.c:4630
msgid "Restore"
msgstr "Povrati"

#: ../../standalone/drakbackup_.c:4229
#, fuzzy
msgid ""
"Error during sendmail.\n"
"  Your report mail was not sent.\n"
"  Please configure sendmail"
msgstr ""
"Greška tijekom slanja pošte\n"
"  vaš mail sa izvještajem nije poslan\n"
"  molimo podesite sendmail"

#: ../../standalone/drakbackup_.c:4253
#, fuzzy
msgid ""
"The following packages need to be installed:\n"
" @list_of_rpm_to_install"
msgstr "Slijedeći paketi će biti instalirani"

#: ../../standalone/drakbackup_.c:4276
#, fuzzy
msgid ""
"Error during sending file via FTP.\n"
" Please correct your FTP configuration."
msgstr ""
"Greška tijekom slanja datoteke putem FTPa.\n"
" Ispravite svoje FTP postavke."

#: ../../standalone/drakbackup_.c:4299
msgid "Please select data to restore..."
msgstr "Izaberite podatke za povrat"

#: ../../standalone/drakbackup_.c:4320
msgid "Please select media for backup..."
msgstr "Izaberite medij za sigurnosnu pohranu..."

#: ../../standalone/drakbackup_.c:4342
msgid "Please select data to backup..."
msgstr "Izaberite podatke koje ćete pohraniti..."

#: ../../standalone/drakbackup_.c:4364
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""
"Nije pronađena datoteka s postavkama \n"
"pritisnite Čarobnjaka ili Napredno."

#: ../../standalone/drakbackup_.c:4385
msgid "Under Devel ... please wait."
msgstr "Razvija se ... molimo sačekajte."

#: ../../standalone/drakbackup_.c:4466
msgid "Backup system files"
msgstr "Pohrani sustavske datoteke"

#: ../../standalone/drakbackup_.c:4468
msgid "Backup user files"
msgstr "Pohrani korisničke datoteke"

#: ../../standalone/drakbackup_.c:4470
msgid "Backup other files"
msgstr "Pohrani ostale datoteke"

#: ../../standalone/drakbackup_.c:4472 ../../standalone/drakbackup_.c:4505
msgid "Total Progress"
msgstr "Ukupni progres"

#: ../../standalone/drakbackup_.c:4496
msgid "files sending by FTP"
msgstr "slanje datoteka FTPom"

#: ../../standalone/drakbackup_.c:4500
msgid "Sending files..."
msgstr "Šaljem datoteke..."

#: ../../standalone/drakbackup_.c:4586
msgid "Backup Now from configuration file"
msgstr "Pohrani iz datoteke sa postavkama"

#: ../../standalone/drakbackup_.c:4591
msgid "View Backup Configuration."
msgstr "Pogledaj postavke sigurnosne pohrane"

#: ../../standalone/drakbackup_.c:4612
msgid "Wizard Configuration"
msgstr "Postavke čarobnjaka"

#: ../../standalone/drakbackup_.c:4617
msgid "Advanced Configuration"
msgstr "Napredne postavke"

#: ../../standalone/drakbackup_.c:4622
msgid "Backup Now"
msgstr "Pohrani sada"

#: ../../standalone/drakbackup_.c:4656
msgid "Drakbackup"
msgstr "Drakbackup"

#: ../../standalone/drakbackup_.c:4705
#, fuzzy
msgid ""
"options description:\n"
"\n"
" In this step Drakbackup allow you to change:\n"
"\n"
" - The compression mode:\n"
"    \n"
"      If you check bzip2 compression, you will compress\n"
"      your data better than gzip (about 2-10 %).\n"
"      This option is not checked by default because\n"
"      this compression mode needs more time (about 1000% more).\n"
" \n"
" - The update mode:\n"
"\n"
"      This option will update your backup, but this\n"
"      option is not really useful because you need to\n"
"      decompress your backup before you can update it.\n"
"      \n"
" - the .backupignore mode:\n"
"\n"
"      Like with cvs, Drakbackup will ignore all references\n"
"      included in .backupignore files in each directories.\n"
"      ex: \n"
"         /*> cat .backupignore*/\n"
"         *.o\n"
"         *~\n"
"         ...\n"
"      \n"
"\n"
msgstr ""
"opis opcija:\n"
"\n"
"U ovom koraku Drakbackup će vam omogućiti da promijenite:\n"
"\n"
" - Način sažimanja:\n"
"      \n"
"        Ako označite bzip2 sažimanje, sažet ćete vaše\n"
"        podatke bolje nego sa gzipom (oko 2-10 %).\n"
"        Ova opcija nije podrazumijevano označena jer\n"
"        ovaj način sažimanja zathjeva više vremena (oko 1000% više).\n"
" \n"
" - Način osvježavanja pohrane:\n"
"\n"
"        Ova opcija će osvježavati pohranu, ali nije baš\n"
"        pretjerano korisna jer se prvo sve mora dekompresirati\n"
"        prije nego što se osvježi.\n"
"        \n"
" - .backupignore način:\n"
"\n"
"        Kao kod cvsa, Drakbackup će ignorirati sve reference\n"
"        iz .backupignore datoteka u svakoj od mapa.\n"
"        ex: \n"
"           /*> cat .backupignore*/\n"
"           *.o\n"
"           *~\n"
"           ...\n"
"      \n"
"\n"

#: ../../standalone/drakbackup_.c:4735
msgid ""
"\n"
" Some errors during sendmail are caused by \n"
" a bad configuration of postfix. To solve it you have to\n"
" set myhostname or mydomain in /etc/postfix/main.cf\n"
"\n"
msgstr ""
"\n"
"Neke greške tijekom slanja pošte su uzrokovane \n"
" lošim postavkama postfixa. Da bi ih riješili, morate\n"
" namjesiti myhostname ili mydomain u /etc/postfix/main.cf\n"
"\n"

#: ../../standalone/drakbackup_.c:4743
msgid ""
"options description:\n"
"\n"
" - Backup system files:\n"
"       \n"
"\tThis option allows you to backup your /etc directory,\n"
"\twhich contains all configuration files. Please be\n"
"\tcareful during the restore step to not overwrite:\n"
"\t\t/etc/passwd \n"
"\t\t/etc/group \n"
"\t\t/etc/fstab\n"
"\n"
" - Backup User files: \n"
"\n"
"\tThis option allows you select all users that you want \n"
"\tto backup.\n"
"\tTo preserve disk space, it is recommended that you \n"
"\tdo not include web browser's cache.\n"
"\n"
" - Backup Other files: \n"
"\n"
"\tThis option allows you to add more data to save.\n"
"\tWith the other backup it's not possible at the \n"
"\tmoment to select incremental backup.\t\t\n"
" \n"
" - Incremental Backups:\n"
"\n"
"\tThe incremental backup is the most powerful \n"
"\toption for backup. This option allows you \n"
"\tto backup all your data the first time, and \n"
"\tonly the changed afterward.\n"
"\tThen you will be able, during the restore\n"
"\tstep, to restore your data from a specified\n"
"\tdate.\n"
"\tIf you have not selected this option all\n"
"\told backups are deleted before each backup.    \n"
"\n"
"\n"
msgstr ""
"opis opcija:\n"
"\n"
" - Pohrani sustavske datoteke:\n"
"        \n"
"\tOva opcija vam omogućuje da pohranite svoju /etc mapu,\n"
"\tkoja sadrži sve datoteke s postavkama. Budite\n"
"\toprezni tijekom postupka povrata da ne bi prepisali:\n"
"\t\t/etc/passed \n"
"\t\t/etc/group \n"
"\t\t/etc/fstab\n"
"\n"
" - Pohrani korisničke datoteke: \n"
"\n"
"\tOva opcija vam omogućuje da izaberete sve korisnike koje\n"
"\tželite pohraniti.\n"
"\tDa bi uštedjeli prostor na disku, preporučamo da\n"
"\tizostavite cache web preglednika.\n"
"\n"
" - Pohrani ostale datoteke: \n"
"\n"
"\tOva opcija vam omogućuje da dodate još podataka za pohranu.\n"
"\tSa ovom pohranom nije trenutačno moguće izabrati\n"
"\tinkrementalnu pohranu.\t\t\n"
" \n"
" - Inkrementalne pohrane:\n"
"\n"
"\tInkrementalna pohrana je najmoćnija opcija kod\n"
"\tpohranjivanja. Omogućuje vam da pohranite\n"
"\tsve svoje podatke prvi put, a potom samo one\n"
"\tpromijenjene.\n"
"\tZatim ćete moći, prilikom povrata,\n"
"\tvratiti vaše podatke prema određenom\n"
"\tnadnevku.\n"
"\tAko niste izabrali ovu opciju sve\n"
"\tstare pohrane će biti prebrisane prije svake pohrane.\n"
"\n"
"\n"

#: ../../standalone/drakbackup_.c:4782
#, fuzzy
msgid ""
"restore description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
"\n"
"So if you don't want to restore a user please unselect all their\n"
"check boxes.\n"
"\n"
"Otherwise, you are able to select only one of these.\n"
"\n"
" - Incremental Backups:\n"
"\n"
"\tThe incremental backup is the most powerful \n"
"\toption to use. This option allows you to \n"
"\tbackup all of your data the first time, and \n"
"\tonly the changed data after.\n"
"\tSo you will be able, during the restore\n"
"\tstep, to restore your data from a specified\n"
"\tdate.\n"
"\tIf you have not selected this option all\n"
"\told backups are deleted before each backup.    \n"
"\n"
"\n"
"\n"
msgstr ""
"opis povrata:\n"
" \n"
"Samo će se najnoviji nadnevak koristiti, jer je s inkrementalnim \n"
"pohranama potrebno povratiti stare pohrane jednu po jednu.\n"
"\n"
"Dakle, ako ne želite povratiti korisnika, isključite sve njegove\n"
"kućice.\n"
"\n"
"Inače, možete izabrati samo jedno od ovog\n"
"\n"
" - Inkrementalne pohrane:\n"
"\n"
"\tInkrementalna pohrana je najmoćnija opcija kod\n"
"\tpohranjivanja. Omogućuje vam da pohranite\n"
"\tsve svoje podatke prvi put, a potom samo one\n"
"\tpromijenjene.\n"
"\tZatim ćete moći, prilikom povrata,\n"
"\tvratiti vaše podatke prema određenom\n"
"\tnadnevku.\n"
"\tAko niste izabrali ovu opciju sve\n"
"\tstare pohrane će biti prebrisane prije svake pohrane.\n"
"\n"
"\n"
"\n"

#: ../../standalone/drakbackup_.c:4808 ../../standalone/drakbackup_.c:4885
msgid ""
" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
msgstr ""
" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"

#: ../../standalone/drakbackup_.c:4810 ../../standalone/drakbackup_.c:4887
msgid ""
" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""

#: ../../standalone/drakbackup_.c:4812 ../../standalone/drakbackup_.c:4889
msgid ""
" This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""
"Ovaj program je besplatni softver; možete ga redistribuirati i/ili "
"mijenjati\n"
"pod uvjetima GNU General Public License objavljenje od Free Software\n"
"Foundationa; ili inačice 2, ili (kako izaberete) neke kasnije inačice.\n"
"\n"
"Ovaj program se distribuira u nadi da će biti koristan, ali\n"
"BEZ IKAKVE GARANCIJE; bez čak i podrazumijevane TRŽIŠNE GARANCIJE\n"
"ili POGODNOSTI ZA ODREĐENU SVRHU. Pogledajte\n"
"GNU General Public License za više detalja.\n"
"\n"
"Trebali ste dobiti presliku GNU General Public License\n"
"sa ovim programom; ako ne, pišite na Free Software Foundation,\n"
"Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."

#: ../../standalone/drakbackup_.c:4826
msgid ""
"Description:\n"
"\n"
"  Drakbackup is used to backup your system.\n"
"  During the configuration you can select: \n"
"\t- System files, \n"
"\t- Users files, \n"
"\t- Other files.\n"
"\tor All your system ...  and Other (like Windows Partitions)\n"
"\n"
"  Drakbackup allows you to backup your system on:\n"
"\t- Harddrive.\n"
"\t- NFS.\n"
"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
"\t- FTP.\n"
"\t- Rsync.\n"
"\t- Webdav.\n"
"\t- Tape.\n"
"\n"
"  Drakbackup allows you to restore your system to\n"
"  a user selected directory.\n"
"\n"
"  Per default all backup will be stored on your\n"
"  /var/lib/drakbackup directory\n"
"\n"
"  Configuration file:\n"
"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
"\n"
"\n"
"Restore Step:\n"
"  \n"
"  During the restore step, DrakBackup will remove \n"
"  your original directory and verify that all \n"
"  backup files are not corrupted. It is recommended \n"
"  you do a last backup before restoring.\n"
"\n"
"\n"
msgstr ""
"Opis:\n"
"\n"
"  Drakbackup se koristi za sigurnosnu pohranu vašeg sustava.\n"
"  Tijekom podešavanja možete izabrati: \n"
"\t- Sustavske datoteke, \n"
"\t- Korisničke datoteke, \n"
"\t- Ostale datoteke.\n"
"\tčitav vaš sustav ... i ostale (poput Windows particija)\n"
"\n"
"  Drakbackup vam omogućuje da pohranite vaš sustav na:\n"
"\t- Tvrdi disk.\n"
"\t- NFS.\n"
"\t- CDROM (CDRW), DVDROM (s automatskim pokretanjem prilikom podizanja "
"računala,\n"
"spasonosnom opcijom i automatskom instalacijom.).\n"
"\t- FTP.\n"
"\t- Rsync.\n"
"\t- Webdav.\n"
"\t- Vrpcu.\n"
"\n"
"  Drakbackup vam omogućuje da povratite vaš sustav u\n"
"  izabranu mapu.\n"
"\n"
"  Podrazumijevano, sve pohrane će biti u\n"
"  /var/lib/drakbackup mapi\n"
"\n"
"  Datoteka s postavkama:\n"
"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
"\n"
"\n"
"Povrat:\n"
"  \n"
"  Tijekom povrata, DrakBackup će ukloniti \n"
"  vašu izvornu mapu i potvrditi da li su sve\n"
"  datoteke u pohrani ispravne. Preporučamo \n"
"  da napravite posljednju pohranu prije povrata.\n"
"\n"
"\n"

#: ../../standalone/drakbackup_.c:4864
msgid ""
"options description:\n"
"\n"
"Please be careful when you are using ftp backup, because only \n"
"backups that are already built are sent to the server.\n"
"So at the moment, you need to build the backup on your hard \n"
"drive before sending it to the server.\n"
"\n"
msgstr ""
"opis opcija:\n"
"\n"
"Budite oprezni kada koristite ftp pohranu, jer se samo\n"
"pohrane koje su već složene mogu slati polužitelju.\n"
"Tako sada trebate složiti pohranu na vaš tvrdi disk prije\n"
"no što je pošaljete poslužitelju.\n"
"\n"

#: ../../standalone/drakbackup_.c:4873
msgid ""
"\n"
"Restore Backup Problems:\n"
"\n"
"During the restore step, Drakbackup will verify all your\n"
"backup files before restoring them.\n"
"Before the restore, Drakbackup will remove \n"
"your original directory, and you will loose all your \n"
"data. It is important to be careful and not modify the \n"
"backup data files by hand.\n"
msgstr ""
"\n"
"Problemi sa povratom pohrane:\n"
"\n"
"Tijekom pohrane, drakbackup će provjeriti\n"
"sve vaše datoteke u pohrani prije nego ih povrati.\n"
"Prije povrata, Drakbackup će ukloniti vašu izvornu\n"
"mapu, i izgubit ćete sve podatke. Važno je biti\n"
"oprezan i ne mijenjati podatke u pohrani ručno.\n"

#: ../../standalone/drakbackup_.c:4903
msgid ""
"Description:\n"
"\n"
"  Drakbackup is used to backup your system.\n"
"  During the configuration you can select \n"
"\t- System files, \n"
"\t- Users files, \n"
"\t- Other files.\n"
"\tor All your system ...  and Other (like Windows Partitions)\n"
"\n"
"  Drakbackup allows you to backup your system on:\n"
"\t- Harddrive.\n"
"\t- NFS.\n"
"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
"\t- FTP.\n"
"\t- Rsync.\n"
"\t- Webdav.\n"
"\t- Tape.\n"
"\n"
"  Drakbackup allows you to restore your system to\n"
"  a user selected directory.\n"
"\n"
"  Per default all backup will be stored on your\n"
"  /var/lib/drakbackup directory\n"
"\n"
"  Configuration file:\n"
"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
"\n"
"Restore Step:\n"
"  \n"
"  During the restore step, Drakbackup will remove\n"
"  your original directory and verify that all\n"
"  backup files are not corrupted. It is recommended\n"
"  you do a last backup before restoring.\n"
" \n"
"\n"
msgstr ""
"Opis:\n"
"\n"
"  Drakbackup se koristi za sigurnosnu pohranu vašeg sustava.\n"
"  Tijekom podešavanja možete izabrati: \n"
"\t- Sustavske datoteke, \n"
"\t- Korisničke datoteke, \n"
"\t- Ostale datoteke.\n"
"\tčitav vaš sustav ... i ostale (poput Windows particija)\n"
"\n"
"  Drakbackup vam omogućuje da pohranite vaš sustav na:\n"
"\t- Tvrdi disk.\n"
"\t- NFS.\n"
"\t- CDROM (CDRW), DVDROM (s automatskim pokretanjem prilikom podizanja "
"računala,\n"
"spasonosnom opcijom i automatskom instalacijom.).\n"
"\t- FTP.\n"
"\t- Rsync.\n"
"\t- Webdav.\n"
"\t- Vrpcu.\n"
"\n"
"  Drakbackup vam omogućuje da povratite vaš sustav u\n"
"  izabranu mapu.\n"
"\n"
"  Podrazumijevano, sve pohrane će biti u\n"
"  /var/lib/drakbackup mapi\n"
"\n"
"  Datoteka s postavkama:\n"
"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
"\n"
"Povrat:\n"
"  \n"
"  Tijekom povrata, DrakBackup će ukloniti \n"
"  vašu izvornu mapu i potvrditi da li su sve\n"
"  datoteke u pohrani ispravne. Preporučamo \n"
"  da napravite posljednju pohranu prije povrata.\n"
"\n"
"\n"

#: ../../standalone/drakboot_.c:57
#, c-format
msgid "Installation of %s failed. The following error occured:"
msgstr "Instalacija %s-a nije uspjela. Prijavljena je slijedeća grešska:"

#: ../../standalone/drakbug_.c:40
#, c-format
msgid ""
"drakbug version %s\n"
"Copyright (C) 2002 MandrakeSoft.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"usage: drakbug [OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
msgstr ""

#: ../../standalone/drakbug_.c:47
msgid "  --help            - print this help message.\n"
msgstr ""

#: ../../standalone/drakbug_.c:48
msgid "  --report          - program should be one of mandrake tools\n"
msgstr ""

#: ../../standalone/drakbug_.c:49
msgid "  --incident        - program should be one of mandrake tools\n"
msgstr ""

#: ../../standalone/drakbug_.c:64
msgid "Mandrake Bug Report Tool"
msgstr ""

#: ../../standalone/drakbug_.c:70
msgid "First Time Wizard"
msgstr ""

#: ../../standalone/drakbug_.c:71
msgid "Synchronization tool"
msgstr ""

# ../../share/compssUsers
#: ../../standalone/drakbug_.c:72 ../../standalone/drakbug_.c:86
#: ../../standalone/drakbug_.c:151 ../../standalone/drakbug_.c:153
#: ../../standalone/drakbug_.c:157
#, fuzzy
msgid "Standalone Tools"
msgstr "Konzolni Alati"

#: ../../standalone/drakbug_.c:73
#, fuzzy
msgid "HardDrake"
msgstr "na tvrdi disk"

#: ../../standalone/drakbug_.c:74
#, fuzzy
msgid "Mandrake Online"
msgstr "MandrakConsulting"

#: ../../standalone/drakbug_.c:75
#, fuzzy
msgid "Menudrake"
msgstr "MandrakeStore"

#: ../../standalone/drakbug_.c:76
#, fuzzy
msgid "Msec"
msgstr "Miš"

#: ../../standalone/drakbug_.c:77
#, fuzzy
msgid "Remote Control"
msgstr "Udaljeni pisač"

#: ../../standalone/drakbug_.c:78
#, fuzzy
msgid "Software Manager"
msgstr "Ime sharea"

#: ../../standalone/drakbug_.c:79
msgid "Urpmi"
msgstr ""

#: ../../standalone/drakbug_.c:80
msgid "Windows Migration tool"
msgstr ""

#: ../../standalone/drakbug_.c:81
#, fuzzy
msgid "Userdrake"
msgstr "Printerdrake"

#: ../../standalone/drakbug_.c:82
#, fuzzy
msgid "Configuration Wizards"
msgstr "Čarobnjak mrežnih postavki"

#: ../../standalone/drakbug_.c:97
#, fuzzy
msgid "Application:"
msgstr "Provjera autentičnosti"

#: ../../standalone/drakbug_.c:98
#, fuzzy
msgid "Package: "
msgstr "Odabir paketa"

#: ../../standalone/drakbug_.c:99
msgid "Kernel:"
msgstr ""

#: ../../standalone/drakbug_.c:100
#, fuzzy
msgid "Release: "
msgstr "Molim pričekajte"

#: ../../standalone/drakbug_.c:115
msgid ""
"\n"
"\n"
"To submit a bug report, click on the button report.\n"
"This will open  a web browser window  on https://www.bugzilla.com\n"
" where you'll find a form to fill in.The information displayed above will "
"be \n"
"transferred to that server\n"
"\n"
msgstr ""

#: ../../standalone/drakbug_.c:136
#, fuzzy
msgid "Report"
msgstr "port"

#: ../../standalone/drakbug_.c:166
#, fuzzy
msgid "Not installed"
msgstr "Post deinstalacija"

#: ../../standalone/drakbug_.c:183
msgid "connecting to Bugzilla wizard ..."
msgstr ""

#: ../../standalone/drakbug_.c:190
#, fuzzy
msgid "No browser available! Please install one"
msgstr "Screenshotovi će biti raspoloživi poslije instalaciju u %s"

#: ../../standalone/drakconnect_.c:79
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Mrežne postavke (%d adaptera)"

#: ../../standalone/drakconnect_.c:86 ../../standalone/drakconnect_.c:594
msgid "Profile: "
msgstr "Profil: "

#: ../../standalone/drakconnect_.c:94
msgid "Del profile..."
msgstr "Obriši profil..."

#: ../../standalone/drakconnect_.c:100
msgid "Profile to delete:"
msgstr "Profil za obrisati:"

#: ../../standalone/drakconnect_.c:128
msgid "New profile..."
msgstr "Novi profil..."

#: ../../standalone/drakconnect_.c:134
msgid ""
"Name of the profile to create (the new profile is created as a copy of the "
"current one) :"
msgstr ""
"Ime profila kojeg treba stvoriti (novi profil se stvara kao kopija "
"trenutnog):"

#: ../../standalone/drakconnect_.c:160
msgid "Hostname: "
msgstr "Ime računala: "

#: ../../standalone/drakconnect_.c:167
msgid "Internet access"
msgstr "Internet pristup"