# drakx messages in Simplified Chinese
# Danny Zeng <danny@zeng.com.cn>, 2000, 2002
# Jesse Kuang <kjx@mandriva.com>, 2002
# 汤诗语 <shiyu@mandriva.org>, 2003, 2004, 2008
# Funda Wang <fundawang@linux.net.cn>, 2002, 2003, 2004, 2005
#
msgid ""
msgstr ""
"Project-Id-Version: zh_CN\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-04-30 09:51+BRT\n"
"PO-Revision-Date: 2008-03-29 21:33+0800\n"
"Last-Translator: Funda Wang <fundawang@linux.net.cn>\n"
"Language-Team: Mandriva Linux i18n Team <cooker-i18n@mandrivalinux.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../src/msec/config.py:46
msgid "Modified system files"
msgstr "修改系统文件"

#: ../src/msec/config.py:47
msgid "No changes in system files"
msgstr "系统文件无更改"

#: ../src/msec/config.py:60
msgid "Disabled"
msgstr "禁用"

#: ../src/msec/config.py:211 ../src/msec/config.py:423
msgid "Unable to load configuration file %s: %s"
msgstr ""

#: ../src/msec/config.py:225 ../src/msec/config.py:334
#: ../src/msec/config.py:442
#, fuzzy
msgid "Bad config option: %s"
msgstr "保存配置(_S)"

#: ../src/msec/config.py:260 ../src/msec/config.py:373
#: ../src/msec/config.py:468
#, fuzzy
msgid "Unable to save %s: %s"
msgstr "无法装入图像文件 %s"

#: ../src/msec/config.py:319
msgid "loading exceptions file %s: %s"
msgstr ""

#: ../src/msec/config.py:320
#, fuzzy
msgid "No exceptions loaded"
msgstr "例外"

#: ../src/msec/help.py:14
#, fuzzy
msgid ""
"Allow local users to connect to X server. Accepted arguments: yes (all "
"connections are allowed), local (only local connection), no (no connection)."
msgstr ""
"允许 X 连接:\n"
"\n"
"- 所有(允许所有连接), \n"
"\n"
"- 本地(只允许本地连接), \n"
"\n"
"- 无(禁止所有连接)。"

#: ../src/msec/help.py:16
#, fuzzy
msgid "Enable checking for files/directories writable by everybody."
msgstr "检查每人可写的文件/目录"

#: ../src/msec/help.py:18
msgid "Log syslog messages on console terminal 12."
msgstr ""

#: ../src/msec/help.py:20
msgid "Send mail reports even if no changes were detected."
msgstr "如果没有检测到更改，也发送邮件报告。"

#: ../src/msec/help.py:22
msgid ""
"Defines the base security level, on top of which the current configuration "
"is based."
msgstr ""

#: ../src/msec/help.py:24
msgid "Accept broadcasted ICMP echo."
msgstr "接受广播 ICMP 回应。"

#: ../src/msec/help.py:26
msgid ""
"Enable verification for changes in the installed RPM packages. This will "
"notify you when new packages are installed or removed."
msgstr ""

#: ../src/msec/help.py:28
msgid "Enable periodic permission checking for files specified in msec policy."
msgstr ""

#: ../src/msec/help.py:30
msgid "Ignore changes in process IDs when checking for open network ports."
msgstr ""

#: ../src/msec/help.py:32
msgid "Allow X server to accept connections from network on tcp port 6000."
msgstr ""

#: ../src/msec/help.py:34
msgid "Enable checking for known rootkits using chkrootkit."
msgstr ""

#: ../src/msec/help.py:36
msgid ""
"Enable msec to enforce file permissions to the values specified in the msec "
"security policy."
msgstr ""

#: ../src/msec/help.py:38
msgid ""
"Enable sectools checks. This check will run all sectool checks for a "
"security level configuration. The security level to be used during this test "
"is determined by the CHECK_SECTOOL_LEVELS variable."
msgstr ""

#: ../src/msec/help.py:40
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr "设置 shell 命令历史大小。-1 表示没有限制。"

#: ../src/msec/help.py:42
#, fuzzy
msgid "Allow system reboot and shutdown to local users."
msgstr "允许控制台用户重新启动。"

#: ../src/msec/help.py:44
msgid "Enable checking for changes in firewall settings."
msgstr "启用对防火墙设置更改的检查。"

#: ../src/msec/help.py:46
#, fuzzy
msgid "Enable checking for additions/removals of suid root files."
msgstr "检查 suid root 文件的添加/删除"

#: ../src/msec/help.py:48
msgid "Enables logging of periodic checks to system log."
msgstr ""

#: ../src/msec/help.py:50
#, fuzzy
msgid ""
"Enable crontab and at for users. Put allowed users in /etc/cron.allow and /"
"etc/at.allow (see man at(1) and crontab(1))."
msgstr ""
"启用用户的 crontab 和 at。\n"
"\n"
"将允许的用户放在 /etc/cron.allow 和 /etc/at.allow(参看 at(1) 和 crontab(1) "
"的 man)。"

#: ../src/msec/help.py:52
msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
msgstr ""

#: ../src/msec/help.py:54
msgid ""
"Enable password-related checks, such as empty passwords and strange super-"
"user accounts."
msgstr ""

#: ../src/msec/help.py:56
#, fuzzy
msgid ""
"Set the password history length to prevent password reuse. This is not "
"supported by pam_tcb."
msgstr "设置密码历史长度以避免密码重用。"

#: ../src/msec/help.py:58
msgid "Enable checksum verification for suid files."
msgstr ""

#: ../src/msec/help.py:60
msgid ""
"Use secure location for temporary files. If this parameter is set to 'yes', "
"user home directory will be used for temporary files. Otherwise, /tmp will "
"be used."
msgstr ""

#: ../src/msec/help.py:62
#, fuzzy
msgid "User email to receive security notifications."
msgstr "请稍候, 正在设置安全选项..."

#: ../src/msec/help.py:64
#, fuzzy
msgid "Set the user umask."
msgstr "设置用户文件的模式创建 mask。"

#: ../src/msec/help.py:66
msgid "Allow only users in wheel group to su to root."
msgstr "只允许 wheel 组中的用户 su 到 root。"

#: ../src/msec/help.py:68
#, fuzzy
msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
msgstr "检查 /etc/shadow 中的空密码"

#: ../src/msec/help.py:70
msgid "Allow autologin."
msgstr "允许自动登录。"

#: ../src/msec/help.py:72
#, fuzzy
msgid "Enable checking for changes in system users."
msgstr "报告无主文件"

#: ../src/msec/help.py:74
#, fuzzy
msgid "Enable checking for unowned files."
msgstr "报告无主文件"

#: ../src/msec/help.py:76
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr "设置 shell 超时。若设为 0, 则为没有超时。"

#: ../src/msec/help.py:78
msgid "Allow display managers (kdm and gdm) to display list of local users."
msgstr ""

#: ../src/msec/help.py:80
#, fuzzy
msgid "Enable name resolution spoofing protection."
msgstr "名称解析欺骗保护"

#: ../src/msec/help.py:82
msgid ""
"Enforce MSEC file directory permissions on system startup. If this parameter "
"is set to 'enforce', system permissions will be enforced automatically, "
"according to system security settings."
msgstr ""

#: ../src/msec/help.py:84
msgid "Include current directory into user PATH by default"
msgstr ""

#: ../src/msec/help.py:86
msgid ""
"Enable permission checking on users' files that should not be owned by "
"someone else, or writable."
msgstr ""

#: ../src/msec/help.py:88
msgid ""
"Creates the symlink /etc/security/msec/server to point to /etc/security/msec/"
"server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --"
"add to decide to add a service if it is present in the file during the "
"installation of packages. By default, two presets are provided: local (which "
"only enables local services) and remote (which also enables some remote "
"services considered safe). Note that the allowed services must be placed "
"manually into the server.SERVER_LEVEL files when necessary."
msgstr ""

#: ../src/msec/help.py:90
msgid ""
"Use password to authenticate users. Take EXTREME care when disabling "
"passwords, as it will leave the machine vulnerable."
msgstr ""

#: ../src/msec/help.py:92
msgid "Show security notifications in system tray using libnotify."
msgstr ""

#: ../src/msec/help.py:94
msgid ""
"Set umask option for mounting vfat and ntfs partitions. If umask is '-1', "
"default system umask is used."
msgstr ""

#: ../src/msec/help.py:96
msgid "Enable checking for open network ports."
msgstr ""

#: ../src/msec/help.py:98
#, fuzzy
msgid "Allow direct root login on terminal."
msgstr "允许直接 root 登录。"

#: ../src/msec/help.py:100
msgid "Run security checks when machine is running on battery power."
msgstr ""

#: ../src/msec/help.py:102
#, fuzzy
msgid "Enable checking for changes in system groups."
msgstr "报告无主文件"

#: ../src/msec/help.py:104
msgid ""
"Allow remote root login via sshd. If yes, login is allowed. If without-"
"password, only public-key authentication logins are allowed. See sshd_config"
"(5) man page for more information."
msgstr ""

#: ../src/msec/help.py:106
#, fuzzy
msgid "Enable logging of strange network packets."
msgstr "启用 IPv4 异常包日志。"

#: ../src/msec/help.py:108
msgid ""
"Define the default retention period for logs, in weeks. Some countries "
"require that the log files should be kept for 12 months, other do not have "
"such strict requirements. This variable defines the number of past log files "
"that should be kept by logrotate on the system."
msgstr ""

#: ../src/msec/help.py:110
msgid "Ask for root password when going to single user level (man sulogin(8))."
msgstr ""

#: ../src/msec/help.py:112
msgid "Enable IP spoofing protection."
msgstr "启用 IP 欺骗保护。"

#: ../src/msec/help.py:114
msgid "Allow root access without password for the members of the wheel group."
msgstr ""

#: ../src/msec/help.py:116
msgid "Fix owner and group of unowned files to use nobody/nogroup."
msgstr ""

#: ../src/msec/help.py:118
#, fuzzy
msgid "Send security check results by email."
msgstr "通过邮件报告检测结果"

#: ../src/msec/help.py:120
#, fuzzy
msgid ""
"Allow to export display when passing from the root account to the other "
"users. See pam_xauth(8) for more details."
msgstr ""
"允许从 root 账户传递给其它用户时导出显示。\n"
"\n"
"请查看 pam_xauth(8) 中的细节。"

#: ../src/msec/help.py:122
msgid ""
"Defines the sectool level to use during the periodic security check. You may "
"use the sectool-gui application to select individual tests for each level. "
"If this variable is not defined, the default level defined in sectool "
"configuration will be used."
msgstr ""

#: ../src/msec/help.py:124
#, fuzzy
msgid "Enable daily security checks."
msgstr "运行每日安全检查"

#: ../src/msec/help.py:126
#, fuzzy
msgid "Accept ICMP echo."
msgstr "接受 icmp 回应。"

#: ../src/msec/help.py:128
#, fuzzy
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters, using length,ndigits,nupper format."
msgstr "设置密码最短长度, 数字的最少个数, 大写字母的最少个数。"

#: ../src/msec/help.py:130
#, fuzzy
msgid ""
"Allow full access to network services controlled by tcp_wrapper (see hosts."
"deny(5)). If yes, all services are allowed. If local, only connections to "
"local services are authorized. If no, the services must be authorized "
"manually in /etc/hosts.allow (see hosts.allow(5))."
msgstr ""
"认证:\n"
"\n"
"- 如果设为“ALL”, 则认证所有被 tcp_wrappers 控制的服务(参看 hosts.deny(5) man "
"page)；\n"
"\n"
"- 如果设为“LOCAL”, 则仅对本地服务；\n"
"\n"
"- 如果设为“NONE”, 则不认证任何服务。\n"
"\n"
"要认证您需要的服务, 请使用 /etc/hosts.allow(参看 hosts.allow(5))。"

#: ../src/msec/help.py:132
msgid ""
"Enable verification of integrity of installed RPM packages. This will notify "
"you if checksums of the installed files were changed, showing separate "
"results for binary and configuration files."
msgstr ""

#: ../src/msec/help.py:134
msgid ""
"Patterns to exclude from disk checks. This parameter is parsed as a regex "
"(7), so you may use complex expressions."
msgstr ""

#: ../src/msec/help.py:136
msgid ""
"Allow users in wheel group to use sudo. If this option is set to 'yes', the "
"users in wheel group are allowed to use sudo and run commands as root by "
"using their passwords. If this option to set to 'without-password', the "
"users can use sudo without being asked for their password. WARNING: using "
"sudo without any password makes your system very vulnerable, and you should "
"only use this setting if you know what you are doing!"
msgstr ""

#: ../src/msec/help.py:138
#, fuzzy
msgid "Set the root umask."
msgstr "设置 root 的文件模式创建 mask。"

#: ../src/msec/help.py:140
msgid "Perform hourly security check for changes in system configuration."
msgstr ""

#: ../src/msec/help.py:142
msgid "Enforce MSEC settings on system startup"
msgstr ""

#: ../src/msec/help.py:144
msgid "Enable periodic security check results to terminal."
msgstr ""

#: ../src/msec/help.py:146
msgid "Accept bogus IPv4 error messages."
msgstr "接受有错的 IPv4 错误消息。"

#: ../src/msec/help.py:148
#, fuzzy
msgid "Enable checking for additions/removals of sgid files."
msgstr "检查 sgid 文件的添加/删除"

#: ../src/msec/help.py:150
msgid "Activate ethernet cards promiscuity check."
msgstr "激活以太网卡混用检查。"

#: ../src/msec/libmsec.py:266
msgid "%s modified so launched command: %s"
msgstr ""

#: ../src/msec/libmsec.py:275
msgid "%s modified so should have run command: %s"
msgstr ""

#: ../src/msec/libmsec.py:377 ../src/msec/libmsec.py:409
#, fuzzy
msgid "deleted %s"
msgstr "删除"

#: ../src/msec/libmsec.py:395
#, fuzzy
msgid "touched file %s"
msgstr "非本地文件"

#: ../src/msec/libmsec.py:415
#, fuzzy
msgid "made symbolic link from %s to %s"
msgstr "从 %s 切换到 %s"

#: ../src/msec/libmsec.py:418
msgid "moved file %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:468 ../src/msec/libmsec.py:484
msgid "set variable %s to %s in %s"
msgstr ""

#: ../src/msec/libmsec.py:686
msgid "Error loading plugin '%s' from %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:703
msgid "Invalid callback: %s"
msgstr ""

#: ../src/msec/libmsec.py:712
msgid "Plugin %s not found"
msgstr ""

#: ../src/msec/libmsec.py:719
msgid "Not supported function '%s' in '%s'"
msgstr ""

#: ../src/msec/libmsec.py:726 ../src/msec/libmsec.py:856
msgid "In check-only mode, nothing is written back to disk."
msgstr ""

#: ../src/msec/libmsec.py:753
msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
msgstr ""

#: ../src/msec/libmsec.py:786
#, fuzzy
msgid "user name %s not found"
msgstr "该用户名太长"

#: ../src/msec/libmsec.py:798
msgid "user name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:810
msgid "group name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:822
msgid "group name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:832
msgid "Unable to check /proc/mounts. Assuming all file systems are local."
msgstr ""

#: ../src/msec/libmsec.py:871
#, fuzzy
msgid "Forcing ownership of %s to %s"
msgstr "从 %s 切换到 %s"

#: ../src/msec/libmsec.py:875
#, fuzzy
msgid "Error changing user on %s: %s"
msgstr "卸载 %s 出错: %s"

#: ../src/msec/libmsec.py:877
msgid "Wrong owner of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:880
#, fuzzy
msgid "Enforcing group on %s to %s"
msgstr "从 %s 切换到 %s"

#: ../src/msec/libmsec.py:884
#, fuzzy
msgid "Error changing group on %s: %s"
msgstr "卸载 %s 出错: %s"

#: ../src/msec/libmsec.py:886
msgid "Wrong group of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:891
msgid "Enforcing permissions on %s to %o"
msgstr ""

#: ../src/msec/libmsec.py:895
msgid "Error changing permissions on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:897
msgid "Wrong permissions of %s: should be %o"
msgstr ""

#: ../src/msec/libmsec.py:901
#, fuzzy
msgid "Enforcing acl on %s"
msgstr "从 %s 切换到 %s"

#: ../src/msec/libmsec.py:915
#, fuzzy
msgid "Unable to add filesystem-specific ACL %s to %s"
msgstr "重置为默认级别权限"

#: ../src/msec/libmsec.py:917
#, fuzzy
msgid "Error changing acl on %s: %s"
msgstr "卸载 %s 出错: %s"

#: ../src/msec/libmsec.py:919
msgid "Wrong acl of %s"
msgstr ""

#: ../src/msec/libmsec.py:936
msgid "bad permissions for '%s': '%s'"
msgstr ""

#: ../src/msec/libmsec.py:961
msgid "Non local file: \"%s\". Nothing changed."
msgstr ""

#: ../src/msec/libmsec.py:1006
#, fuzzy
msgid "Checking paths: %s"
msgstr "正在检查 %s"

#: ../src/msec/msec.py:87 ../src/msec/msecperms.py:96
#, fuzzy
msgid "Invalid security level '%s'."
msgstr "安全级别"

#: ../src/msec/msec.py:114 ../src/msec/msecperms.py:121
msgid "Msec: Mandriva Security Center (%s)\n"
msgstr ""

#: ../src/msec/msec.py:115 ../src/msec/msecperms.py:122
msgid "Error: This application must be executed by root!"
msgstr ""

#: ../src/msec/msec.py:116 ../src/msec/msecperms.py:123
msgid "Run with --help to get help."
msgstr ""

#: ../src/msec/msec.py:142
msgid "Level '%s' not found, aborting."
msgstr ""

#: ../src/msec/msec.py:144
#, fuzzy
msgid "Switching to '%s' level."
msgstr "从 %s 切换到 %s"

#: ../src/msec/msec.py:151
msgid "No custom file permissions for level '%s'."
msgstr ""

#: ../src/msec/msec.py:152
#, fuzzy
msgid "Saving file permissions to '%s' level."
msgstr "更改 %s 的权限"

#: ../src/msec/msec.py:192 ../src/msec/msecperms.py:166
#, fuzzy
msgid "Unable to save config!"
msgstr "无法装入图像文件 %s"

#: ../src/msec/msec.py:194
#, fuzzy
msgid "Unable to save file system permissions!"
msgstr "重置为默认级别权限"

#: ../src/msec/msecgui.py:55
msgid ""
"<big><b>Choose security level</b></big>\n"
"This application allows you to configure your system security. If you wish\n"
"to activate it, choose the appropriate security level: "
msgstr ""

#: ../src/msec/msecgui.py:61
msgid ""
"This profile configures a reasonably safe set of security features. It is "
"the suggested level for Desktop. If unsure which profile to use, use this "
"one."
msgstr ""

#: ../src/msec/msecgui.py:62
msgid ""
"This profile is focused on netbooks, laptops or low-end devices, which are "
"only accessed by local users and run on batteries."
msgstr ""

#: ../src/msec/msecgui.py:64
msgid ""
"This profile is configured to provide maximum security, even at the cost of "
"limiting the remote access to the system. This level is suggested for "
"security-concerned systems and servers. "
msgstr ""

#: ../src/msec/msecgui.py:66
msgid ""
"This profile is targeted on local network servers, which do not receive "
"accesses from unauthorized Internet users."
msgstr ""

#: ../src/msec/msecgui.py:68
msgid ""
"This profile is provided for servers which are intended to be accessed by "
"unauthorized Internet users."
msgstr ""

#: ../src/msec/msecgui.py:69
msgid ""
"This profile is intended for the users who do not rely on msec to change "
"system settings, and use it for periodic checks only. It configures all "
"periodic checks to run once a day."
msgstr ""

#: ../src/msec/msecgui.py:70
msgid ""
"This profile is similar to the 'audit_daily' profile, but it runs all checks "
"weekly."
msgstr ""

#: ../src/msec/msecgui.py:77
#, fuzzy
msgid "Custom security level."
msgstr "系统安全"

#: ../src/msec/msecgui.py:80
msgid ""
"<big><b>System security options</b></big>\n"
"These options control the local security configuration, such as the login "
"restrictions,\n"
"password configurations, integration with other security tools, and default "
"file creation\n"
"permissions.  "
msgstr ""

#: ../src/msec/msecgui.py:85
msgid ""
"<big><b>Network security options</b></big>\n"
"These options define the network security against remote threats, "
"unauthorized accesses,\n"
"and breakin attempts.  "
msgstr ""

#: ../src/msec/msecgui.py:89
msgid ""
"<big><b>Periodic security checks</b></big>\n"
"These options configure the security checks that should be executed "
"periodically.  "
msgstr ""

#: ../src/msec/msecgui.py:92
msgid ""
"<big><b>Exceptions</b></big>\n"
"Here you can configure the allowed exceptions for msec periodic security\n"
"checks. For each supported test, you may add as many exceptions as you want\n"
"for each check. Note that each exception is parsed as a regexp."
msgstr ""

#: ../src/msec/msecgui.py:97
msgid ""
"<big><b>File permissions</b></big>\n"
"These options allow to fine-tune system permissions for important files and "
"directories.\n"
"The following permissions are checked periodically, and any change to the "
"owner, group,\n"
"or current permission is reported. The permissions can be enforced, "
"automatically\n"
"changing them to the specified values when a change is detected.  "
msgstr ""

#: ../src/msec/msecgui.py:103
msgid "Save and apply new configuration?"
msgstr "保存并应用新配置吗？"

#: ../src/msec/msecgui.py:154
msgid "Unable to load configuration for level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:160
msgid "Unable to load permissions for level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:193
msgid "_File"
msgstr "文件(_F)"

#: ../src/msec/msecgui.py:195
msgid "_Save configuration"
msgstr "保存配置(_S)"

#: ../src/msec/msecgui.py:200
msgid "_Quit"
msgstr "退出(_Q)"

#: ../src/msec/msecgui.py:202 ../src/msec/msecgui.py:204
msgid "_Help"
msgstr "帮助(_H)"

#: ../src/msec/msecgui.py:205
msgid "_About"
msgstr "关于(_A)"

#: ../src/msec/msecgui.py:232
msgid "MSEC: System Security and Audit"
msgstr "MSEC: 系统安全审计"

#: ../src/msec/msecgui.py:245
msgid "Overview"
msgstr "概要"

#: ../src/msec/msecgui.py:246
msgid "Security settings"
msgstr "安全设置"

#: ../src/msec/msecgui.py:255
msgid "Basic security"
msgstr "基本安全"

#: ../src/msec/msecgui.py:256
msgid "System security"
msgstr "系统安全"

#: ../src/msec/msecgui.py:257
msgid "Network security"
msgstr "网络安全"

#: ../src/msec/msecgui.py:258 ../src/msec/msecgui.py:649
msgid "Periodic checks"
msgstr "定期检查"

#: ../src/msec/msecgui.py:259
msgid "Exceptions"
msgstr "例外"

#: ../src/msec/msecgui.py:260 ../src/msec/msecgui.py:1250
msgid "Permissions"
msgstr "权限"

#: ../src/msec/msecgui.py:300
msgid "MSEC option changes"
msgstr "MSEC 选项更改"

#: ../src/msec/msecgui.py:300
msgid "option"
msgstr "选项"

#: ../src/msec/msecgui.py:301
msgid "System permissions changes"
msgstr "系统权限更改"

#: ../src/msec/msecgui.py:301
msgid "permission check"
msgstr "权限检查"

#: ../src/msec/msecgui.py:311
msgid "changed %s <b>%s</b> (%s -> %s)"
msgstr ""

#: ../src/msec/msecgui.py:316
msgid "added %s <b>%s</b> (%s)"
msgstr ""

#: ../src/msec/msecgui.py:321
msgid "removed %s <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:325
msgid "no changes"
msgstr "无更改"

#: ../src/msec/msecgui.py:338 ../src/msec/msecgui.py:345
msgid "Saving changes.."
msgstr "正在保存更改..."

#: ../src/msec/msecgui.py:341
msgid "Ignore and quit"
msgstr "忽略并退出"

#: ../src/msec/msecgui.py:379
msgid "<b>%s:</b> <i>%s</i>\n"
msgstr "<b>%s:</b> <i>%s</i>\n"

#: ../src/msec/msecgui.py:386
msgid "<b>MSEC test run results:</b> <i>%s</i>"
msgstr "<b>MSEC 测试运行结果:</b> <i>%s</i>"

#: ../src/msec/msecgui.py:394
msgid "Details"
msgstr "细节"

#: ../src/msec/msecgui.py:400
msgid "MSEC messages (%s): %d"
msgstr ""

#: ../src/msec/msecgui.py:414
msgid "Details (%d changes).."
msgstr "细节(%d 处更改)..."

#: ../src/msec/msecgui.py:467
msgid "No base msec level specified, using '%s'"
msgstr ""

#: ../src/msec/msecgui.py:470
msgid "Detected base msec level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:498
msgid "Security Option"
msgstr "安全选项"

#: ../src/msec/msecgui.py:508 ../src/msec/msecgui.py:846
msgid "Description"
msgstr "描述"

#: ../src/msec/msecgui.py:513
msgid "Value"
msgstr "值"

#: ../src/msec/msecgui.py:523
msgid "Invalid option '%s'!"
msgstr "无效的选项“%s”!"

#: ../src/msec/msecgui.py:593
msgid "Firewall"
msgstr "防火墙"

#: ../src/msec/msecgui.py:600 ../src/msec/msecgui.py:642
msgid "Configure"
msgstr "配置"

#: ../src/msec/msecgui.py:608
msgid "Updates"
msgstr "更新"

#: ../src/msec/msecgui.py:614
msgid "Update now"
msgstr "立即更新"

#: ../src/msec/msecgui.py:621
msgid "Security"
msgstr "安全"

#: ../src/msec/msecgui.py:624
msgid "Msec is disabled"
msgstr "Msec 已禁用"

#: ../src/msec/msecgui.py:627
msgid "Msec is enabled"
msgstr "Msec 已启用"

#: ../src/msec/msecgui.py:628
msgid "Base security level: '%s'"
msgstr ""

#: ../src/msec/msecgui.py:636
msgid "Custom settings: %d"
msgstr "自定义设置：%d"

#: ../src/msec/msecgui.py:657
msgid "Never"
msgstr ""

#: ../src/msec/msecgui.py:658
msgid "Check: %s. Last run: %s"
msgstr ""

#: ../src/msec/msecgui.py:663
msgid "Show results"
msgstr ""

#: ../src/msec/msecgui.py:669
msgid "Run now"
msgstr ""

#: ../src/msec/msecgui.py:690
#, fuzzy
msgid "Unable to read log file: %s"
msgstr "无法装入图像文件 %s"

#: ../src/msec/msecgui.py:691
#, fuzzy
msgid "Periodic check results"
msgstr "定期检查"

#: ../src/msec/msecgui.py:723
msgid ""
"Do you want to run the <b>%s</b> periodic check? Please note that it could "
"take a considerable time to finish."
msgstr ""

#: ../src/msec/msecgui.py:731 ../src/msec/msecgui.py:739
msgid "Please wait, running checks..."
msgstr ""

#: ../src/msec/msecgui.py:742
msgid "Please wait, this might take a few minutes."
msgstr ""

#: ../src/msec/msecgui.py:771
msgid "Periodic check was executed successfully!"
msgstr ""

#: ../src/msec/msecgui.py:774
msgid "An error occurred while running periodic check."
msgstr ""

#: ../src/msec/msecgui.py:806
msgid "Enable MSEC tool"
msgstr "允许 MSEC 工具"

#: ../src/msec/msecgui.py:813
msgid "Select the base security level"
msgstr "选择基础安全级别"

#: ../src/msec/msecgui.py:836
msgid "Level name"
msgstr "级别名称"

#: ../src/msec/msecgui.py:892
msgid "Send security alerts by email to:"
msgstr "通过电子邮件发送安全警告:"

#: ../src/msec/msecgui.py:914
msgid "Display security alerts on desktop"
msgstr "在桌面上显示安全警告"

#: ../src/msec/msecgui.py:1098
msgid "Enable periodic security checks"
msgstr "启用定期安全检查"

#: ../src/msec/msecgui.py:1160
msgid "Security check"
msgstr "安全检查"

#: ../src/msec/msecgui.py:1166
msgid "Exception"
msgstr "例外"

#: ../src/msec/msecgui.py:1187 ../src/msec/msecgui.py:1314
msgid "Add a rule"
msgstr "添加规则"

#: ../src/msec/msecgui.py:1192 ../src/msec/msecgui.py:1319
msgid "Delete"
msgstr "删除"

#: ../src/msec/msecgui.py:1232
msgid "Path"
msgstr "路径"

#: ../src/msec/msecgui.py:1238
msgid "User"
msgstr "用户"

#: ../src/msec/msecgui.py:1244
msgid "Group"
msgstr "组"

#: ../src/msec/msecgui.py:1258
msgid "Enforce"
msgstr "强制"

#: ../src/msec/msecgui.py:1266
msgid "Acl"
msgstr ""

#: ../src/msec/msecgui.py:1419
msgid "Editing exception"
msgstr "编辑例外"

#: ../src/msec/msecgui.py:1424
msgid "Adding new exception"
msgstr "添加新例外"

#: ../src/msec/msecgui.py:1431
msgid ""
"Editing exception. Please select the correspondent msec check and exception "
"value\n"
msgstr "编辑例外。请选择相应的 msec 检查及例外值\n"

#: ../src/msec/msecgui.py:1438
msgid "Check: "
msgstr "检查: "

#: ../src/msec/msecgui.py:1453
msgid "Exception: "
msgstr "例外: "

#: ../src/msec/msecgui.py:1489
msgid "Changing permissions for %s"
msgstr "更改 %s 的权限"

#: ../src/msec/msecgui.py:1497
msgid "Adding new permission check"
msgstr "添加新的权限检查"

#: ../src/msec/msecgui.py:1509
#, fuzzy
msgid "Changing permissions on <b>%s</b>"
msgstr "更改 %s 的权限"

#: ../src/msec/msecgui.py:1509
msgid "new file"
msgstr "新文件"

#: ../src/msec/msecgui.py:1521
msgid "File: "
msgstr "文件: "

#: ../src/msec/msecgui.py:1530
#, fuzzy
msgid ""
"Please specify new file owner and permissions, or use 'current' to keep "
"current settings."
msgstr ""
"更改 <b>%s</b> 的权限\n"
"请指定新权限，或者使用“current”保持当前权限。\n"

#: ../src/msec/msecgui.py:1537
msgid "User: "
msgstr "用户: "

#: ../src/msec/msecgui.py:1548
msgid "Group: "
msgstr "组: "

#: ../src/msec/msecgui.py:1559
msgid "Permissions: "
msgstr "权限: "

#: ../src/msec/msecgui.py:1568
msgid ""
"To enforce additional ACL (Access Control List) on file, specify them in the "
"following format:\n"
"user1:acl,user2:acl\n"
"Refer to 'man setfacl' for details."
msgstr ""

#: ../src/msec/msecgui.py:1575
msgid "ACL: "
msgstr ""

#: ../src/msec/msecgui.py:1642
msgid "Select new value for %s"
msgstr "选择 %s 的新值"

#: ../src/msec/msecgui.py:1651
#, fuzzy
msgid ""
"<i>%s</i>\n"
"\n"
"\tCurrent value:\t\t\t<i>%s</i>\n"
"\t%sDefault level value:\t<i>%s</i>%s\n"
msgstr ""
"<i>%s</i>\n"
"\n"
"\t当前值:\t\t\t<i>%s</i>\n"
"\t%s标准级别值:\t<i>%s</i>%s\n"
"\t%s安全级别值:\t\t<i>%s</i>%s\n"

#: ../src/msec/msecgui.py:1661
msgid "New value:"
msgstr "新值:"

#: ../src/msec/plugins/msec.py:149
msgid "Allowing unrestricted chkconfig for packages"
msgstr ""

#: ../src/msec/plugins/msec.py:154
msgid "Restricting chkconfig for packages according to \"%s\" profile"
msgstr ""

#: ../src/msec/plugins/msec.py:164
#, fuzzy
msgid "Setting root umask to %s"
msgstr "从 %s 切换到 %s"

#: ../src/msec/plugins/msec.py:174
#, fuzzy
msgid "Setting users umask to %s"
msgstr "从 %s 切换到 %s"

#: ../src/msec/plugins/msec.py:195
msgid "Allowing users to connect X server from everywhere"
msgstr ""

#: ../src/msec/plugins/msec.py:198
msgid "Allowing users to connect X server from localhost"
msgstr ""

#: ../src/msec/plugins/msec.py:201
msgid "Restricting X server connection to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:204
msgid "invalid allow_x_connections arg: %s"
msgstr ""

#: ../src/msec/plugins/msec.py:227
#, fuzzy
msgid "Allowing the X server to listen to tcp connections"
msgstr "允许 X Window 连接"

#: ../src/msec/plugins/msec.py:238
msgid "Forbidding the X server to listen to tcp connection"
msgstr ""

#: ../src/msec/plugins/msec.py:254
#, fuzzy
msgid "Invalid shell timeout \"%s\""
msgstr "Shell 超时"

#: ../src/msec/plugins/msec.py:262
#, fuzzy
msgid "Setting shell timeout to %s"
msgstr "Shell 超时"

#: ../src/msec/plugins/msec.py:270
#, fuzzy
msgid "Invalid shell history size \"%s\""
msgstr "Shell 历史大小"

#: ../src/msec/plugins/msec.py:281
#, fuzzy
msgid "Setting shell history size to %s"
msgstr "Shell 历史大小"

#: ../src/msec/plugins/msec.py:285
#, fuzzy
msgid "Removing limit on shell history size"
msgstr "Shell 历史大小"

#: ../src/msec/plugins/msec.py:294
#, fuzzy
msgid "Invalid file system umask \"%s\""
msgstr "Shell 超时"

#: ../src/msec/plugins/msec.py:328
#, fuzzy
msgid "Allowing reboot and shutdown to the console user"
msgstr "允许控制台用户重新启动。"

#: ../src/msec/plugins/msec.py:335
#, fuzzy
msgid "Allowing SysRq key to the console user"
msgstr "允许控制台用户重新启动。"

#: ../src/msec/plugins/msec.py:338
msgid "Allowing Shutdown/Reboot in GDM"
msgstr "允许在 GDM 中关机/重启"

#: ../src/msec/plugins/msec.py:342
msgid "Allowing Shutdown/Reboot in KDM"
msgstr "允许在 KDM 中关机/重启"

#: ../src/msec/plugins/msec.py:345
msgid "Allowing Ctrl-Alt-Del from console"
msgstr "允许在控制台按 Ctrl+Alt+Del"

#: ../src/msec/plugins/msec.py:349
#, fuzzy
msgid "Forbidding reboot and shutdown to the console user"
msgstr "允许控制台用户重新启动。"

#: ../src/msec/plugins/msec.py:357
#, fuzzy
msgid "Forbidding SysRq key to the console user"
msgstr "控制台用户可重新启动"

#: ../src/msec/plugins/msec.py:360
msgid "Forbidding Shutdown/Reboot in GDM"
msgstr "禁止在 GDM 中关机/重启"

#: ../src/msec/plugins/msec.py:364
msgid "Forbidding Shutdown/Reboot in KDM"
msgstr "禁止在 KDM 中关机/重启"

#: ../src/msec/plugins/msec.py:367
msgid "Forbidding Ctrl-Alt-Del from console"
msgstr "禁止在控制台按 Ctrl+Alt+Del"

#: ../src/msec/plugins/msec.py:381
msgid "Allowing list of users in KDM"
msgstr "允许在 KDM 中列出用户"

#: ../src/msec/plugins/msec.py:385
msgid "Allowing list of users in GDM"
msgstr "允许在 GDM 中列出用户"

#: ../src/msec/plugins/msec.py:390
msgid "Forbidding list of users in KDM"
msgstr "禁止在 KDM 中列出用户"

#: ../src/msec/plugins/msec.py:394
msgid "Forbidding list of users in GDM"
msgstr "禁止在 GDM 中列出用户"

#: ../src/msec/plugins/msec.py:405
msgid "Allowing autologin"
msgstr "允许自动登录"

#: ../src/msec/plugins/msec.py:408
#, fuzzy
msgid "Forbidding autologin"
msgstr "允许自动登录。"

#: ../src/msec/plugins/msec.py:413
msgid "Activating password in boot loader"
msgstr ""

#: ../src/msec/plugins/msec.py:427
#, fuzzy
msgid "Removing password in boot loader"
msgstr "没有密码时效"

#: ../src/msec/plugins/msec.py:442
#, fuzzy
msgid "Enabling log on console"
msgstr "在 12 号控制台上启用系统日志报告"

#: ../src/msec/plugins/msec.py:446
#, fuzzy
msgid "Disabling log on console"
msgstr "在控制台显示 LOGO"

#: ../src/msec/plugins/msec.py:463
msgid "Authorizing all services"
msgstr ""

#: ../src/msec/plugins/msec.py:467
msgid "Disabling all services"
msgstr ""

#: ../src/msec/plugins/msec.py:471
#, fuzzy
msgid "Disabling non local services"
msgstr "共享本地扫描仪"

#: ../src/msec/plugins/msec.py:483
#, fuzzy
msgid "Enabling sulogin in single user runlevel"
msgstr "在单用户级别上启用 sulogin(8)。"

#: ../src/msec/plugins/msec.py:487
#, fuzzy
msgid "Disabling sulogin in single user runlevel"
msgstr "在单用户级别上启用 sulogin(8)。"

#: ../src/msec/plugins/msec.py:498
#, fuzzy
msgid "Enabling msec periodic runs"
msgstr "正在启用 swap 分区 %s"

#: ../src/msec/plugins/msec.py:502
msgid "Disabling msec periodic runs"
msgstr ""

#: ../src/msec/plugins/msec.py:515
#, fuzzy
msgid "Enabling crontab and at"
msgstr "启用用户的“crontab”和“at”"

#: ../src/msec/plugins/msec.py:522
#, fuzzy
msgid "Disabling crontab and at"
msgstr "启用用户的“crontab”和“at”"

#: ../src/msec/plugins/msec.py:534
msgid "Allowing export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:538
msgid "Forbidding export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:564
#, fuzzy
msgid "Allowing direct root login"
msgstr "允许直接 root 登录。"

#: ../src/msec/plugins/msec.py:581
#, fuzzy
msgid "Forbidding direct root login"
msgstr "允许直接 root 登录。"

#: ../src/msec/plugins/msec.py:603
msgid "Using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:605
msgid "Not using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:625
msgid "Allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/msec.py:628
msgid "Not allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/network.py:134
msgid "Allowing remote root login"
msgstr "允许远程 root 登录"

#: ../src/msec/plugins/network.py:138
msgid "Forbidding remote root login"
msgstr "禁止远程 root 登录"

#: ../src/msec/plugins/network.py:142
#, fuzzy
msgid "Allowing remote root login only by passphrase"
msgstr "允许远程 root 登录"

#: ../src/msec/plugins/network.py:175
#, fuzzy
msgid "Enabling name resolution spoofing protection"
msgstr "名称解析欺骗保护"

#: ../src/msec/plugins/network.py:180
#, fuzzy
msgid "Disabling name resolution spoofing protection"
msgstr "名称解析欺骗保护"

#: ../src/msec/plugins/pam.py:68
msgid "Using password to authenticate users"
msgstr "使用密码验证用户"

#: ../src/msec/plugins/pam.py:72
msgid "Don't use password to authenticate users"
msgstr "不使用密码验证用户"

#: ../src/msec/plugins/pam.py:83
msgid "Password history not supported with pam_tcb."
msgstr "pam_tcb 不支持密码历史。"

#: ../src/msec/plugins/pam.py:91
msgid "Invalid maximum password history length: \"%s\""
msgstr "无效的最大密码历史长度: “%s”"

#: ../src/msec/plugins/pam.py:106
msgid "Setting password history to %d."
msgstr "将密码设置为 %d。"

#: ../src/msec/plugins/pam.py:112
msgid "Disabling password history"
msgstr "禁用密码历史"

#: ../src/msec/plugins/pam.py:124
msgid ""
"Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter"
msgstr "无效的密码长度“%s”。请使用“长度,数字数,大写字母数”作为参数"

#: ../src/msec/plugins/pam.py:145
msgid "Setting minimum password length %d"
msgstr "设置最小的密码长度 %d"

#: ../src/msec/plugins/pam.py:169
msgid "Allowing su only from wheel group members"
msgstr "只对 wheel 组成员启用 su"

#: ../src/msec/plugins/pam.py:173
msgid "no wheel group"
msgstr "没有 wheel 组"

#: ../src/msec/plugins/pam.py:177
msgid ""
"Security configuration is defined to allow only members of the wheel group "
"to su to root, but this group is empty. Please add the allowed users into "
"the wheel group."
msgstr ""

#: ../src/msec/plugins/pam.py:185
msgid "Allowing su for all"
msgstr "允许所有人 su"

#: ../src/msec/plugins/pam.py:204
msgid "Allowing transparent root access for wheel group members"
msgstr "允许 wheel 组的成员执行 root 的透明访问"

#: ../src/msec/plugins/pam.py:211
msgid "Disabling transparent root access for wheel group members"
msgstr "禁止 wheel 组的成员执行 root 的透明访问"