# translation of DrakX-vi.po to 
# Vietnamese Translation for DrakX module.
# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
# Trinh Minh Thanh <tmthanh@yahoo.com> 2001-2005.
# Larry Nguyen <larry@vnlinux.org> 2005.
msgid ""
msgstr ""
"Project-Id-Version: DrakX-vi version\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-02-04 11:31+BRST\n"
"PO-Revision-Date: 2005-06-02 21:17+0700\n"
"Last-Translator: Larry Nguyen <larry@vnlinux.org>\n"
"Language-Team:  <gnomevi-list@lists.sourceforge.net>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../src/msec/config.py:45
msgid "Modified system files"
msgstr ""

#: ../src/msec/config.py:46
#, fuzzy
msgid "No changes in system files"
msgstr "Báo cáo các tập tin vô chủ"

#: ../src/msec/config.py:59
msgid "Disabled"
msgstr ""

#: ../src/msec/config.py:195 ../src/msec/config.py:290
#: ../src/msec/config.py:393
msgid "Unable to load configuration file %s: %s"
msgstr ""

#: ../src/msec/config.py:209 ../src/msec/config.py:304
#: ../src/msec/config.py:415
#, fuzzy
msgid "Bad config option: %s"
msgstr "Cấu hình âm thanh"

#: ../src/msec/config.py:244 ../src/msec/config.py:343
#: ../src/msec/config.py:441
msgid "Unable to save %s: %s"
msgstr ""

#: ../src/msec/help.py:14
#, fuzzy
msgid ""
"Allow local users to connect to X server. Accepted arguments: yes (all "
"connections are allowed), local (only local connection), no (no connection)."
msgstr ""
"Cho phép/Cấm kết nối X:\n"
"\n"
"- Toàn Bộ (cho phép mọi kết nối),\n"
"\n"
"- Cục Bộ (chỉ cho kết nối từ máy cục bộ),\n"
"\n"
"- Không (không có kết nối)."

#: ../src/msec/help.py:16
#, fuzzy
msgid "Enable checking for files/directories writable by everybody."
msgstr ""
"Mọi người dùng được phép kiểm tra các tập tin/thư mục có thể ghi vào được."

#: ../src/msec/help.py:18
msgid "Log syslog messages on console terminal 12."
msgstr ""

#: ../src/msec/help.py:20
msgid "Send mail reports even if no changes were detected."
msgstr ""

#: ../src/msec/help.py:22
msgid ""
"Defines the base security level, on top of which the current configuration "
"is based."
msgstr ""

#: ../src/msec/help.py:24
#, fuzzy
msgid "Accept broadcasted ICMP echo."
msgstr "Chấp nhận broadcasted icmp echo"

#: ../src/msec/help.py:26
msgid ""
"Enable msec to enforce file permissions to the values specified in the msec "
"security policy."
msgstr ""

#: ../src/msec/help.py:28
msgid "Enable periodic permission checking for files specified in msec policy."
msgstr ""

#: ../src/msec/help.py:30
msgid "Allow X server to accept connections from network on tcp port 6000."
msgstr ""

#: ../src/msec/help.py:32
msgid "Enable checking for known rootkits using chkrootkit."
msgstr ""

#: ../src/msec/help.py:34
msgid ""
"Enable verification for changes in the installed RPM packages. This will "
"notify you when new packages are installed or removed."
msgstr ""

#: ../src/msec/help.py:36
msgid ""
"Enable sectools checks. This check will run all sectool checks for a "
"security level configuration. The security level to be used during this test "
"is determined by the CHECK_SECTOOL_LEVELS variable."
msgstr ""

#: ../src/msec/help.py:38
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr "Đặt kích thước lược sử các lệnh shell. Giá trị là 1 sẽ là vô giới hạn."

#: ../src/msec/help.py:40
#, fuzzy
msgid "Allow system reboot and shutdown to local users."
msgstr "Cho phép/Cấm khởi động lại bằng người dùng từ console."

#: ../src/msec/help.py:42
#, fuzzy
msgid "Enable checking for changes in firewall settings."
msgstr "Báo cáo các tập tin vô chủ"

#: ../src/msec/help.py:44
#, fuzzy
msgid "Enable checking for additions/removals of suid root files."
msgstr "Kiểm tra việc thêm/gỡ bỏ của các tập tin suid của root"

#: ../src/msec/help.py:46
msgid "Enables logging of periodic checks to system log."
msgstr ""

#: ../src/msec/help.py:48
#, fuzzy
msgid ""
"Enable crontab and at for users. Put allowed users in /etc/cron.allow and /"
"etc/at.allow (see man at(1) and crontab(1))."
msgstr ""
"Bật/Tắt crontab và at cho người dùng.\n"
"\n"
"Đặt người dùng được phép vào /etc/cron.allow và /etc/at.allow (hãy xem man at"
"(1)\n"
"và crontab(1))."

#: ../src/msec/help.py:50
msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
msgstr ""

#: ../src/msec/help.py:52
msgid ""
"Enable password-related checks, such as empty passwords and strange super-"
"user accounts."
msgstr ""

#: ../src/msec/help.py:54
#, fuzzy
msgid ""
"Set the password history length to prevent password reuse. This is not "
"supported by pam_tcb."
msgstr "Đặt độ dài lược sử của mật khẩu để tránh dùng lại mật khẩu."

#: ../src/msec/help.py:56
msgid "Enable checksum verification for suid files."
msgstr ""

#: ../src/msec/help.py:58
msgid ""
"Use secure location for temporary files. If this parameter is set to 'yes', "
"user home directory will be used for temporary files. Otherwise, /tmp will "
"be used."
msgstr ""

#: ../src/msec/help.py:60
#, fuzzy
msgid "User email to receive security notifications."
msgstr "Hãy đợi, đang thiết lập tùy chọn bảo mật..."

#: ../src/msec/help.py:62
#, fuzzy
msgid "Set the user umask."
msgstr "Đặt umask của người dùng."

#: ../src/msec/help.py:64
msgid "Allow only users in wheel group to su to root."
msgstr ""

#: ../src/msec/help.py:66
#, fuzzy
msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
msgstr "Kiểm tra mật khẩu trống trong /etc/shadow"

#: ../src/msec/help.py:68
#, fuzzy
msgid "Allow autologin."
msgstr "Cho phép/Cấm đăng nhập tự động."

#: ../src/msec/help.py:70
#, fuzzy
msgid "Enable checking for changes in system users."
msgstr "Báo cáo các tập tin vô chủ"

#: ../src/msec/help.py:72
#, fuzzy
msgid "Enable checking for unowned files."
msgstr "Báo cáo các tập tin vô chủ"

#: ../src/msec/help.py:74
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr "Đặt thời hạn shell. Giá trị bằng 0 sẽ là không có thời hạn."

#: ../src/msec/help.py:76
msgid "Allow display managers (kdm and gdm) to display list of local users."
msgstr ""

#: ../src/msec/help.py:78
#, fuzzy
msgid "Enable name resolution spoofing protection."
msgstr "Chống giả mạo diễn giải tên"

#: ../src/msec/help.py:80
msgid ""
"Enforce MSEC file directory permissions on system startup. If this parameter "
"is set to 'enforce', system permissions will be enforced automatically, "
"according to system security settings."
msgstr ""

#: ../src/msec/help.py:82
msgid "Include current directory into user PATH by default"
msgstr ""

#: ../src/msec/help.py:84
msgid ""
"Enable permission checking on users' files that should not be owned by "
"someone else, or writable."
msgstr ""

#: ../src/msec/help.py:86
msgid ""
"Creates the symlink /etc/security/msec/server to point to /etc/security/msec/"
"server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --"
"add to decide to add a service if it is present in the file during the "
"installation of packages. By default, two presets are provided: local (which "
"only enables local services) and remote (which also enables some remote "
"services considered safe). Note that the allowed services must be placed "
"manually into the server.SERVER_LEVEL files when necessary."
msgstr ""

#: ../src/msec/help.py:88
msgid ""
"Use password to authenticate users. Take EXTREME care when disabling "
"passwords, as it will leave the machine vulnerable."
msgstr ""

#: ../src/msec/help.py:90
msgid "Show security notifications in system tray using libnotify."
msgstr ""

#: ../src/msec/help.py:92
msgid ""
"Set umask option for mounting vfat and ntfs partitions. If umask is '-1', "
"default system umask is used."
msgstr ""

#: ../src/msec/help.py:94
msgid "Enable checking for open network ports."
msgstr ""

#: ../src/msec/help.py:96
#, fuzzy
msgid "Allow direct root login on terminal."
msgstr "Cho phép/Cấm đăng nhập root trực tiếp."

#: ../src/msec/help.py:98
msgid "Run security checks when machine is running on battery power."
msgstr ""

#: ../src/msec/help.py:100
#, fuzzy
msgid "Enable checking for changes in system groups."
msgstr "Báo cáo các tập tin vô chủ"

#: ../src/msec/help.py:102
msgid ""
"Allow remote root login via sshd. If yes, login is allowed. If without-"
"password, only public-key authentication logins are allowed. See sshd_config"
"(5) man page for more information."
msgstr ""

#: ../src/msec/help.py:104
#, fuzzy
msgid "Enable logging of strange network packets."
msgstr "Cho phép tạo bản ghi (log) các gói IPv4 lạ."

#: ../src/msec/help.py:106
msgid "Ask for root password when going to single user level (man sulogin(8))."
msgstr ""

#: ../src/msec/help.py:108
#, fuzzy
msgid "Enable IP spoofing protection."
msgstr "Bật chạy việc bảo vệ IP spoofing"

#: ../src/msec/help.py:110
msgid "Allow root access without password for the members of the wheel group."
msgstr ""

#: ../src/msec/help.py:112
msgid "Fix owner and group of unowned files to use nobody/nogroup."
msgstr ""

#: ../src/msec/help.py:114
#, fuzzy
msgid "Send security check results by email."
msgstr "Báo cáo kết quả kiểm tra bằng thư."

#: ../src/msec/help.py:116
#, fuzzy
msgid ""
"Allow to export display when passing from the root account to the other "
"users. See pam_xauth(8) for more details."
msgstr ""
"Cho phép/Cấm xuất ra màn hình khi\n"
"chuyển từ tài khoản root sang người dùng khác.\n"
"\n"
"Xem pam_xauth(8) để biết thêm thông tin.'"

#: ../src/msec/help.py:118
msgid ""
"Defines the sectool level to use during the periodic security check. You may "
"use the sectool-gui application to select individual tests for each level. "
"If this variable is not defined, the default level defined in sectool "
"configuration will be used."
msgstr ""

#: ../src/msec/help.py:120
#, fuzzy
msgid "Enable daily security checks."
msgstr "Chạy kiểm tra bảo mật hàng ngày"

#: ../src/msec/help.py:122
#, fuzzy
msgid "Accept ICMP echo."
msgstr "Chấp nhận icmp echo"

#: ../src/msec/help.py:124
#, fuzzy
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters, using length,ndigits,nupper format."
msgstr ""
"Đặt độ dài tối thiểu của mật khẩu và số tối thiểu các số và số tối thiểu các "
"chữ cái viết hoa."

#: ../src/msec/help.py:126
#, fuzzy
msgid ""
"Allow full access to network services controlled by tcp_wrapper (see hosts."
"deny(5)). If yes, all services are allowed. If local, only connections to "
"local services are authorized. If no, the services must be authorized "
"manually in /etc/hosts.allow (see hosts.allow(5))."
msgstr ""
"Cho phép:\n"
"\n"
"- mọi dịch vụ được điều khiển bởi tcp_wrappers (hãy xem hosts.deny(5) man "
"page) nếu đặt là \"Toàn Bộ\",\n"
"\n"
"- chỉ các máy cục bộ nếu đặt là \"Cục Bộ\"\n"
"\n"
"- không nếu đặt là \"Không\".\n"
"\n"
"Để cho phép dịch vụ bạn cần, dùng /etc/hosts.allow (hãy xem hosts.allow(5))."

#: ../src/msec/help.py:128
msgid ""
"Enable verification of integrity of installed RPM packages. This will notify "
"you if checksums of the installed files were changed, showing separate "
"results for binary and configuration files."
msgstr ""

#: ../src/msec/help.py:130
#, fuzzy
msgid "Set the root umask."
msgstr "Đặt root umask."

#: ../src/msec/help.py:132
msgid "Perform hourly security check for changes in system configuration."
msgstr ""

#: ../src/msec/help.py:134
msgid "Enforce MSEC settings on system startup"
msgstr ""

#: ../src/msec/help.py:136
msgid "Enable periodic security check results to terminal."
msgstr ""

#: ../src/msec/help.py:138
#, fuzzy
msgid "Accept bogus IPv4 error messages."
msgstr "Chấp nhận các thông điệp báo lỗi giả của IPv4"

#: ../src/msec/help.py:140
#, fuzzy
msgid "Enable checking for additions/removals of sgid files."
msgstr "Kiểm tra phần thêm/gỡ bỏ của các tập tin sgid"

#: ../src/msec/help.py:142
#, fuzzy
msgid "Activate ethernet cards promiscuity check."
msgstr "Kích hoạt/Tắt việc kiểm tra tính hỗn nhiên của ethernet card."

#: ../src/msec/libmsec.py:266
msgid "%s modified so launched command: %s"
msgstr ""

#: ../src/msec/libmsec.py:275
msgid "%s modified so should have run command: %s"
msgstr ""

#: ../src/msec/libmsec.py:377 ../src/msec/libmsec.py:409
#, fuzzy
msgid "deleted %s"
msgstr "Xóa"

#: ../src/msec/libmsec.py:395
#, fuzzy
msgid "touched file %s"
msgstr "Không có tập tin như vậy"

#: ../src/msec/libmsec.py:415
#, fuzzy
msgid "made symbolic link from %s to %s"
msgstr "Chuyển từ ext2 sang ext3"

#: ../src/msec/libmsec.py:418
msgid "moved file %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:468 ../src/msec/libmsec.py:484
msgid "set variable %s to %s in %s"
msgstr ""

#: ../src/msec/libmsec.py:686
msgid "Error loading plugin '%s' from %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:703
msgid "Invalid callback: %s"
msgstr ""

#: ../src/msec/libmsec.py:712
msgid "Plugin %s not found"
msgstr ""

#: ../src/msec/libmsec.py:719
msgid "Not supported function '%s' in '%s'"
msgstr ""

#: ../src/msec/libmsec.py:726 ../src/msec/libmsec.py:856
msgid "In check-only mode, nothing is written back to disk."
msgstr ""

#: ../src/msec/libmsec.py:753
msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
msgstr ""

#: ../src/msec/libmsec.py:786
#, fuzzy
msgid "user name %s not found"
msgstr "Tên người dùng quá dài"

#: ../src/msec/libmsec.py:798
msgid "user name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:810
msgid "group name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:822
msgid "group name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:832
msgid "Unable to check /proc/mounts. Assuming all file systems are local."
msgstr ""

#: ../src/msec/libmsec.py:871
#, fuzzy
msgid "Forcing ownership of %s to %s"
msgstr "Chuyển từ ext2 sang ext3"

#: ../src/msec/libmsec.py:875
#, fuzzy
msgid "Error changing user on %s: %s"
msgstr "Lỗi khi đang thôi gắn kết %s: %s"

#: ../src/msec/libmsec.py:877
msgid "Wrong owner of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:880
#, fuzzy
msgid "Enforcing group on %s to %s"
msgstr "Chuyển từ ext2 sang ext3"

#: ../src/msec/libmsec.py:884
#, fuzzy
msgid "Error changing group on %s: %s"
msgstr "Lỗi khi đang thôi gắn kết %s: %s"

#: ../src/msec/libmsec.py:886
msgid "Wrong group of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:891
msgid "Enforcing permissions on %s to %o"
msgstr ""

#: ../src/msec/libmsec.py:895
msgid "Error changing permissions on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:897
msgid "Wrong permissions of %s: should be %o"
msgstr ""

#: ../src/msec/libmsec.py:914
msgid "bad permissions for '%s': '%s'"
msgstr ""

#: ../src/msec/libmsec.py:939
msgid "Non local file: \"%s\". Nothing changed."
msgstr ""

#: ../src/msec/libmsec.py:981
#, fuzzy
msgid "Checking paths: %s"
msgstr "Kiểm tra %s"

#: ../src/msec/msec.py:87 ../src/msec/msecperms.py:96
#, fuzzy
msgid "Invalid security level '%s'."
msgstr "Mức độ bảo mật"

#: ../src/msec/msec.py:114 ../src/msec/msecperms.py:121
msgid "Msec: Mandriva Security Center (%s)\n"
msgstr ""

#: ../src/msec/msec.py:115 ../src/msec/msecperms.py:122
msgid "Error: This application must be executed by root!"
msgstr ""

#: ../src/msec/msec.py:116 ../src/msec/msecperms.py:123
msgid "Run with --help to get help."
msgstr ""

#: ../src/msec/msec.py:142
msgid "Level '%s' not found, aborting."
msgstr ""

#: ../src/msec/msec.py:144
#, fuzzy
msgid "Switching to '%s' level."
msgstr "Chuyển từ ext2 sang ext3"

#: ../src/msec/msec.py:151
msgid "No custom file permissions for level '%s'."
msgstr ""

#: ../src/msec/msec.py:152
#, fuzzy
msgid "Saving file permissions to '%s' level."
msgstr "Chuyển từ ext2 sang ext3"

#: ../src/msec/msec.py:192 ../src/msec/msecperms.py:160
msgid "Unable to save config!"
msgstr ""

#: ../src/msec/msec.py:194
msgid "Unable to save file system permissions!"
msgstr ""

#: ../src/msec/msecgui.py:51
msgid ""
"<big><b>Choose security level</b></big>\n"
"This application allows you to configure your system security. If you wish\n"
"to activate it, choose the appropriate security level: "
msgstr ""

#: ../src/msec/msecgui.py:55
msgid ""
"This profile configures a reasonably safe set of security features. It "
"activates several non-intrusive periodic system checks. This is the "
"suggested level for Desktop."
msgstr ""

#: ../src/msec/msecgui.py:57
msgid ""
"This profile is configured to provide maximum security, even at the cost of "
"limiting the remote access to the system. It also runs a wider set of "
"periodic checks. This level is suggested for Servers and security-concerned "
"systems . "
msgstr ""

#: ../src/msec/msecgui.py:60
msgid ""
"<big><b>System security options</b></big>\n"
"These options control the local security configuration, such as the login "
"restrictions,\n"
"password configurations, integration with other security tools, and default "
"file creation\n"
"permissions.  "
msgstr ""

#: ../src/msec/msecgui.py:65
msgid ""
"<big><b>Network security options</b></big>\n"
"These options define the network security against remote threats, "
"unauthorized accesses,\n"
"and breakin attempts.  "
msgstr ""

#: ../src/msec/msecgui.py:69
msgid ""
"<big><b>Periodic security checks</b></big>\n"
"These options configure the security checks that should be executed "
"periodically.  "
msgstr ""

#: ../src/msec/msecgui.py:72
msgid ""
"<big><b>Exceptions</b></big>\n"
"Here you can configure the allowed exceptions for msec periodic security\n"
"checks. For each supported test, you may add as many exceptions as you want\n"
"for each check. Note that each exception is parsed as a regexp."
msgstr ""

#: ../src/msec/msecgui.py:77
msgid ""
"<big><b>File permissions</b></big>\n"
"These options allow to fine-tune system permissions for important files and "
"directories.\n"
"The following permissions are checked periodically, and any change to the "
"owner, group,\n"
"or current permission is reported. The permissions can be enforced, "
"automatically\n"
"changing them to the specified values when a change is detected.  "
msgstr ""

#: ../src/msec/msecgui.py:83
#, fuzzy
msgid "Save and apply new configuration?"
msgstr "Hãy chờ...đang áp dụng cấu hình"

#: ../src/msec/msecgui.py:151
#, fuzzy
msgid "_File"
msgstr "Chi Lê"

#: ../src/msec/msecgui.py:153
#, fuzzy
msgid "_Save configuration"
msgstr "Cấu hình âm thanh"

#: ../src/msec/msecgui.py:158
#, fuzzy
msgid "_Quit"
msgstr "Thoát"

#: ../src/msec/msecgui.py:160 ../src/msec/msecgui.py:162
#, fuzzy
msgid "_Help"
msgstr "Trợ giúp"

#: ../src/msec/msecgui.py:163
#, fuzzy
msgid "_About"
msgstr "Giới thiệu về"

#: ../src/msec/msecgui.py:190
#, fuzzy
msgid "MSEC: System Security and Audit"
msgstr "Thiết lập của hệ thống"

#: ../src/msec/msecgui.py:208
#, fuzzy
msgid "Basic security"
msgstr "Kiểm tra bảo mật hàng ngày"

#: ../src/msec/msecgui.py:209
#, fuzzy
msgid "System security"
msgstr "Bảo mật"

#: ../src/msec/msecgui.py:210
#, fuzzy
msgid "Network security"
msgstr "Lý lịch mạng"

#: ../src/msec/msecgui.py:211
#, fuzzy
msgid "Periodic checks"
msgstr "Kiểm tra theo giai đoạn"

#: ../src/msec/msecgui.py:212
#, fuzzy
msgid "Exceptions"
msgstr "Tùy chọn"

#: ../src/msec/msecgui.py:213 ../src/msec/msecgui.py:890
msgid "Permissions"
msgstr "Sự chấp thuận"

#: ../src/msec/msecgui.py:246
msgid "MSEC option changes"
msgstr ""

#: ../src/msec/msecgui.py:246
#, fuzzy
msgid "option"
msgstr "Tùy chọn"

#: ../src/msec/msecgui.py:247
#, fuzzy
msgid "System permissions changes"
msgstr "Tùy Chọn Hệ Thống"

#: ../src/msec/msecgui.py:247
#, fuzzy
msgid "permission check"
msgstr "Sự chấp thuận"

#: ../src/msec/msecgui.py:257
msgid "changed %s <b>%s</b> (%s -> %s)"
msgstr ""

#: ../src/msec/msecgui.py:262
msgid "added %s <b>%s</b> (%s)"
msgstr ""

#: ../src/msec/msecgui.py:267
msgid "removed %s <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:271
#, fuzzy
msgid "no changes"
msgstr "Không chia sẻ"

#: ../src/msec/msecgui.py:283
#, fuzzy
msgid "Saving changes.."
msgstr "Đang gỡ bỏ các gói tin..."

#: ../src/msec/msecgui.py:317
msgid "<b>%s:</b> <i>%s</i>\n"
msgstr ""

#: ../src/msec/msecgui.py:324
msgid "<b>MSEC test run results:</b> <i>%s</i>"
msgstr ""

#: ../src/msec/msecgui.py:332
msgid "Details"
msgstr "Chi tiết"

#: ../src/msec/msecgui.py:338
msgid "MSEC messages (%s): %d"
msgstr ""

#: ../src/msec/msecgui.py:352
msgid "Details (%d changes).."
msgstr ""

#: ../src/msec/msecgui.py:405
msgid "No base msec level specified, using '%s'"
msgstr ""

#: ../src/msec/msecgui.py:408
msgid "Detected base msec level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:413
msgid "Custom base config level '%s' found. Will default to '%s'"
msgstr ""

#: ../src/msec/msecgui.py:441
#, fuzzy
msgid "Security Option"
msgstr "Định rõ tùy chọn"

#: ../src/msec/msecgui.py:451
#, fuzzy
msgid "Description"
msgstr "Định rõ tùy chọn"

#: ../src/msec/msecgui.py:456
#, fuzzy
msgid "Value"
msgstr "Palau"

#: ../src/msec/msecgui.py:466
#, fuzzy
msgid "Invalid option '%s'!"
msgstr "Tùy Chọn Cơ Bản"

#: ../src/msec/msecgui.py:516
#, fuzzy
msgid "Enable MSEC tool"
msgstr "Cho phép khởi động từ CD?"

#: ../src/msec/msecgui.py:523
#, fuzzy
msgid "Select the base security level"
msgstr "Hãy chọn mức bảo mật mong muốn"

#: ../src/msec/msecgui.py:527
msgid "Standard"
msgstr "Chuẩn"

#: ../src/msec/msecgui.py:536
#, fuzzy
msgid "Secure"
msgstr "Bảo mật"

#: ../src/msec/msecgui.py:549
#, fuzzy
msgid "Send security alerts by email"
msgstr "Cảnh Báo Bảo Mật:"

#: ../src/msec/msecgui.py:556
#, fuzzy
msgid "System administrator email address:"
msgstr "Đặt mật khẩu root"

#: ../src/msec/msecgui.py:575
msgid "Display security alerts on desktop"
msgstr ""

#: ../src/msec/msecgui.py:739
#, fuzzy
msgid "Enable periodic security checks"
msgstr "Bật chạy việc kiểm tra bảo mật hàng giờ của msec"

#: ../src/msec/msecgui.py:801
#, fuzzy
msgid "Security check"
msgstr "Kiểm tra theo giai đoạn"

#: ../src/msec/msecgui.py:807
#, fuzzy
msgid "Exception"
msgstr "Tùy chọn"

#: ../src/msec/msecgui.py:828 ../src/msec/msecgui.py:947
#, fuzzy
msgid "Add a rule"
msgstr "Thêm người dùng"

#: ../src/msec/msecgui.py:833 ../src/msec/msecgui.py:952
msgid "Delete"
msgstr "Xóa"

#: ../src/msec/msecgui.py:872
msgid "Path"
msgstr "Đường dẫn"

#: ../src/msec/msecgui.py:878
#, fuzzy
msgid "User"
msgstr "ID Người Dùng"

#: ../src/msec/msecgui.py:884
#, fuzzy
msgid "Group"
msgstr "ID Nhóm"

#: ../src/msec/msecgui.py:898
#, fuzzy
msgid "Enforce"
msgstr "Bỏ qua"

#: ../src/msec/msecgui.py:1051
msgid "Editing exception"
msgstr ""

#: ../src/msec/msecgui.py:1056
msgid "Adding new exception"
msgstr ""

#: ../src/msec/msecgui.py:1063
msgid ""
"Editing exception. Please select the correspondent msec check and exception "
"value\n"
msgstr ""

#: ../src/msec/msecgui.py:1070
msgid "Check: "
msgstr ""

#: ../src/msec/msecgui.py:1085
msgid "Exception: "
msgstr ""

#: ../src/msec/msecgui.py:1120
msgid "Changing permissions for %s"
msgstr ""

#: ../src/msec/msecgui.py:1127
msgid "Adding new permission check"
msgstr ""

#: ../src/msec/msecgui.py:1139
msgid ""
"Changing permissions on <b>%s</b>\n"
"Please specify new permissions, or use 'current' to keep current "
"permissions.\n"
msgstr ""

#: ../src/msec/msecgui.py:1139
msgid "new file"
msgstr ""

#: ../src/msec/msecgui.py:1147
#, fuzzy
msgid "File: "
msgstr "/_Tệp"

#: ../src/msec/msecgui.py:1155
#, fuzzy
msgid "User: "
msgstr "ID Người Dùng"

#: ../src/msec/msecgui.py:1163
#, fuzzy
msgid "Group: "
msgstr "ID Nhóm"

#: ../src/msec/msecgui.py:1171
#, fuzzy
msgid "Permissions: "
msgstr "Sự chấp thuận"

#: ../src/msec/msecgui.py:1232
#, fuzzy
msgid "Select new value for %s"
msgstr "Chọn tập tin firmware cho %s"

#: ../src/msec/msecgui.py:1241
msgid ""
"<i>%s</i>\n"
"\n"
"\tCurrent value:\t\t\t<i>%s</i>\n"
"\t%sStandard level value:\t<i>%s</i>%s\n"
"\t%sSecure level value:\t\t<i>%s</i>%s\n"
msgstr ""

#: ../src/msec/msecgui.py:1252
#, fuzzy
msgid "New value:"
msgstr "New Caledonia"

#: ../src/msec/msecgui.py:1314
msgid "Save your changes?"
msgstr ""

#: ../src/msec/msecgui.py:1316
#, fuzzy
msgid "_Cancel"
msgstr "Bỏ qua"

#: ../src/msec/msecgui.py:1317
#, fuzzy
msgid "_Ignore"
msgstr "Bỏ qua"

#: ../src/msec/msecgui.py:1318
#, fuzzy
msgid "_Save"
msgstr "Lưu"

#: ../src/msec/msecgui.py:1320
#, fuzzy
msgid "Do you want to save changes before closing?"
msgstr "Bạn có muốn lưu các thay đổi của /etc/fstab?"

#: ../src/msec/plugins/msec.py:149
msgid "Allowing unrestricted chkconfig for packages"
msgstr ""

#: ../src/msec/plugins/msec.py:154
msgid "Restricting chkconfig for packages according to \"%s\" profile"
msgstr ""

#: ../src/msec/plugins/msec.py:164
#, fuzzy
msgid "Setting root umask to %s"
msgstr "Chuyển từ ext2 sang ext3"

#: ../src/msec/plugins/msec.py:174
#, fuzzy
msgid "Setting users umask to %s"
msgstr "Chuyển từ ext2 sang ext3"

#: ../src/msec/plugins/msec.py:195
msgid "Allowing users to connect X server from everywhere"
msgstr ""

#: ../src/msec/plugins/msec.py:198
msgid "Allowing users to connect X server from localhost"
msgstr ""

#: ../src/msec/plugins/msec.py:201
msgid "Restricting X server connection to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:204
msgid "invalid allow_x_connections arg: %s"
msgstr ""

#: ../src/msec/plugins/msec.py:227
#, fuzzy
msgid "Allowing the X server to listen to tcp connections"
msgstr "Cho phép kết nối tới X Window"

#: ../src/msec/plugins/msec.py:238
msgid "Forbidding the X server to listen to tcp connection"
msgstr ""

#: ../src/msec/plugins/msec.py:254
#, fuzzy
msgid "Invalid shell timeout \"%s\""
msgstr "Thời hạn của Shell"

#: ../src/msec/plugins/msec.py:262
#, fuzzy
msgid "Setting shell timeout to %s"
msgstr "Thời hạn của Shell"

#: ../src/msec/plugins/msec.py:270
#, fuzzy
msgid "Invalid shell history size \"%s\""
msgstr "Kích thước lược sử của shell"

#: ../src/msec/plugins/msec.py:281
#, fuzzy
msgid "Setting shell history size to %s"
msgstr "Kích thước lược sử của shell"

#: ../src/msec/plugins/msec.py:285
#, fuzzy
msgid "Removing limit on shell history size"
msgstr "Kích thước lược sử của shell"

#: ../src/msec/plugins/msec.py:294
#, fuzzy
msgid "Invalid file system umask \"%s\""
msgstr "Thời hạn của Shell"

#: ../src/msec/plugins/msec.py:328
#, fuzzy
msgid "Allowing reboot and shutdown to the console user"
msgstr "Cho phép/Cấm khởi động lại bằng người dùng từ console."

#: ../src/msec/plugins/msec.py:335
#, fuzzy
msgid "Allowing SysRq key to the console user"
msgstr "Cho phép/Cấm khởi động lại bằng người dùng từ console."

#: ../src/msec/plugins/msec.py:338
msgid "Allowing Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:342
msgid "Allowing Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:345
msgid "Allowing Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/plugins/msec.py:349
#, fuzzy
msgid "Forbidding reboot and shutdown to the console user"
msgstr "Cho phép/Cấm khởi động lại bằng người dùng từ console."

#: ../src/msec/plugins/msec.py:357
#, fuzzy
msgid "Forbidding SysRq key to the console user"
msgstr "Khởi động lại bằng người dùng console"

#: ../src/msec/plugins/msec.py:360
msgid "Forbidding Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:364
msgid "Forbidding Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:367
msgid "Forbidding Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/plugins/msec.py:381
msgid "Allowing list of users in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:385
msgid "Allowing list of users in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:390
msgid "Forbidding list of users in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:394
msgid "Forbidding list of users in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:405
#, fuzzy
msgid "Allowing autologin"
msgstr "Cho phép/Cấm đăng nhập tự động."

#: ../src/msec/plugins/msec.py:408
#, fuzzy
msgid "Forbidding autologin"
msgstr "Cho phép/Cấm đăng nhập tự động."

#: ../src/msec/plugins/msec.py:413
msgid "Activating password in boot loader"
msgstr ""

#: ../src/msec/plugins/msec.py:427
#, fuzzy
msgid "Removing password in boot loader"
msgstr "Không có thời hạn mật khẩu cho"

#: ../src/msec/plugins/msec.py:442
#, fuzzy
msgid "Enabling log on console"
msgstr "Bật/Tắt báo cáo syslog đến console 12"

#: ../src/msec/plugins/msec.py:446
#, fuzzy
msgid "Disabling log on console"
msgstr "Hiển thị Logo trên Console"

#: ../src/msec/plugins/msec.py:463
msgid "Authorizing all services"
msgstr ""

#: ../src/msec/plugins/msec.py:467
msgid "Disabling all services"
msgstr ""

#: ../src/msec/plugins/msec.py:471
#, fuzzy
msgid "Disabling non local services"
msgstr "Chia sẻ máy quét cục bộ"

#: ../src/msec/plugins/msec.py:483
#, fuzzy
msgid "Enabling sulogin in single user runlevel"
msgstr "Bật/Tắt sulogin(8) ở mức độ người dùng đơn lẻ."

#: ../src/msec/plugins/msec.py:487
#, fuzzy
msgid "Disabling sulogin in single user runlevel"
msgstr "Bật/Tắt sulogin(8) ở mức độ người dùng đơn lẻ."

#: ../src/msec/plugins/msec.py:498
#, fuzzy
msgid "Enabling msec periodic runs"
msgstr "Bật chạy phân vùng swap %s"

#: ../src/msec/plugins/msec.py:502
msgid "Disabling msec periodic runs"
msgstr ""

#: ../src/msec/plugins/msec.py:515
#, fuzzy
msgid "Enabling crontab and at"
msgstr "Cho phép chạy \"crontab\" và \"at\" cho người dùng"

#: ../src/msec/plugins/msec.py:522
#, fuzzy
msgid "Disabling crontab and at"
msgstr "Cho phép chạy \"crontab\" và \"at\" cho người dùng"

#: ../src/msec/plugins/msec.py:534
msgid "Allowing export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:538
msgid "Forbidding export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:564
#, fuzzy
msgid "Allowing direct root login"
msgstr "Cho phép/Cấm đăng nhập root trực tiếp."

#: ../src/msec/plugins/msec.py:581
#, fuzzy
msgid "Forbidding direct root login"
msgstr "Cho phép/Cấm đăng nhập root trực tiếp."

#: ../src/msec/plugins/msec.py:603
msgid "Using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:605
msgid "Not using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:625
msgid "Allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/msec.py:628
msgid "Not allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/network.py:134
#, fuzzy
msgid "Allowing remote root login"
msgstr "Cho phép đăng nhập root từ xa"

#: ../src/msec/plugins/network.py:138
#, fuzzy
msgid "Forbidding remote root login"
msgstr "Cho phép/Cấm đăng nhập root từ xa."

#: ../src/msec/plugins/network.py:142
#, fuzzy
msgid "Allowing remote root login only by passphrase"
msgstr "Cho phép đăng nhập root từ xa"

#: ../src/msec/plugins/network.py:175
#, fuzzy
msgid "Enabling name resolution spoofing protection"
msgstr "Chống giả mạo diễn giải tên"

#: ../src/msec/plugins/network.py:180
#, fuzzy
msgid "Disabling name resolution spoofing protection"
msgstr "Chống giả mạo diễn giải tên"

#: ../src/msec/plugins/pam.py:67
#, fuzzy
msgid "Using password to authenticate users"
msgstr "Dùng mật khẩu để chứng thực người dùng"

#: ../src/msec/plugins/pam.py:71
#, fuzzy
msgid "Don't use password to authenticate users"
msgstr "Dùng mật khẩu để chứng thực người dùng"

#: ../src/msec/plugins/pam.py:82
msgid "Password history not supported with pam_tcb."
msgstr ""

#: ../src/msec/plugins/pam.py:90
#, fuzzy
msgid "Invalid maximum password history length: \"%s\""
msgstr "Độ dài lược sử mật khẩu"

#: ../src/msec/plugins/pam.py:105
#, fuzzy
msgid "Setting password history to %d."
msgstr "Độ dài lược sử mật khẩu"

#: ../src/msec/plugins/pam.py:111
#, fuzzy
msgid "Disabling password history"
msgstr "Độ dài lược sử mật khẩu"

#: ../src/msec/plugins/pam.py:123
msgid ""
"Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter"
msgstr ""

#: ../src/msec/plugins/pam.py:144
msgid "Setting minimum password length %d"
msgstr ""

#: ../src/msec/plugins/pam.py:168
#, fuzzy
msgid "Allowing su only from wheel group members"
msgstr ""
"Chỉ cho phép su từ các thành viên của nhóm wheel hay cho phép mọi người dùng"

#: ../src/msec/plugins/pam.py:172
msgid "no wheel group"
msgstr ""

#: ../src/msec/plugins/pam.py:176
msgid "wheel group is empty"
msgstr ""

#: ../src/msec/plugins/pam.py:184
msgid "Allowing su for all"
msgstr ""

#: ../src/msec/plugins/pam.py:203
msgid "Allowing transparent root access for wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:210
#, fuzzy
msgid "Disabling transparent root access for wheel group members"
msgstr ""
"Chỉ cho phép su từ các thành viên của nhóm wheel hay cho phép mọi người dùng"

#, fuzzy
#~ msgid "'%s' is not available in this version"
#~ msgstr "%s không được hỗ trợ bởi phiên bản này của %s."

#, fuzzy
#~ msgid "Activating daily security check"
#~ msgstr "Kích hoạt/Tắt việc kiểm tra bảo mật hàng ngày."

#, fuzzy
#~ msgid "Disabling daily security check"
#~ msgstr "Kiểm tra bảo mật hàng ngày"

#, fuzzy
#~ msgid "Activating periodic promiscuity check"
#~ msgstr "Kích hoạt/Tắt việc kiểm tra tính hỗn nhiên của ethernet card."

#, fuzzy
#~ msgid "Disabling periodic promiscuity check"
#~ msgstr "Kiểm tra tính hỗn nhiên của ethernet card"

#, fuzzy
#~ msgid "_Import configuration"
#~ msgstr "Cấu hình âm thanh"

#, fuzzy
#~ msgid "_Export configuration"
#~ msgstr "Cấu hình âm thanh"

#, fuzzy
#~ msgid "Save and apply current policy"
#~ msgstr "Hãy chờ...đang áp dụng cấu hình"

#, fuzzy
#~ msgid "Quit"
#~ msgstr "Thoát"