# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"POT-Creation-Date: 2009-03-30 11:44+BRT\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: ENCODING\n"
"Generated-By: pygettext.py 1.5\n"


#: ../src/msec/help.py:15
msgid "Enable name resolution spoofing protection."
msgstr ""

#: ../src/msec/help.py:17
msgid "Send mail reports even if no changes were detected."
msgstr ""

#: ../src/msec/help.py:19
msgid "Accept broadcasted ICMP echo."
msgstr ""

#: ../src/msec/help.py:21
msgid "Allow users to authenticate with their passwords for sudo. If this parameter is set to 'wheel', users must belong to the 'wheel' group to be able to use sudo"
msgstr ""

#: ../src/msec/help.py:23
msgid "Allow X server to accept connections from network on tcp port 6000."
msgstr ""

#: ../src/msec/help.py:25
msgid "Enable checking for known rootkits using chkrootkit."
msgstr ""

#: ../src/msec/help.py:27
msgid "Enable checking for additions/removals of suid root files."
msgstr ""

#: ../src/msec/help.py:29
msgid "Enable crontab and at for users. Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1) and crontab(1))."
msgstr ""

#: ../src/msec/help.py:31
msgid "Accept bogus IPv4 error messages."
msgstr ""

#: ../src/msec/help.py:33
msgid "Enable checksum verification for suid files."
msgstr ""

#: ../src/msec/help.py:35
msgid "User email to receive security notifications."
msgstr ""

#: ../src/msec/help.py:37
msgid "Allow autologin."
msgstr ""

#: ../src/msec/help.py:39
msgid "Allow only users in wheel group to su to root."
msgstr ""

#: ../src/msec/help.py:41
msgid "Creates the symlink /etc/security/msec/server to point to /etc/security/msec/server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --add to decide to add a service if it is present in the file during the installation of packages. By default, two presets are provided: local (which only enables local services) and remote (which also enables some remote services considered safe). Note that the allowed services must be placed manually into the server.SERVER_LEVEL files when necessary."
msgstr ""

#: ../src/msec/help.py:43
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: ../src/msec/help.py:45
msgid "Enable permission checking on users' files that should not be owned by someone else, or writable."
msgstr ""

#: ../src/msec/help.py:47
msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
msgstr ""

#: ../src/msec/help.py:49
msgid "Use password to authenticate users. Take EXTREMELY care when disabling passwords, as it will leave the machine vulnerable."
msgstr ""

#: ../src/msec/help.py:51
msgid "Set umask option for mounting vfat and ntfs partitions. If umask is '0', default system umask is used."
msgstr ""

#: ../src/msec/help.py:53
msgid "Enable checking for open network ports."
msgstr ""

#: ../src/msec/help.py:55
msgid "Enable logging of strange network packets."
msgstr ""

#: ../src/msec/help.py:57
msgid "Enable verification of installed RPM packages."
msgstr ""

#: ../src/msec/help.py:59
msgid "Allow root access without password for the members of the wheel group."
msgstr ""

#: ../src/msec/help.py:61
msgid "Send security check results by email."
msgstr ""

#: ../src/msec/help.py:63
msgid "Set the password minimum length and minimum number of digit and minimum number of capitalized letters, using length,ndigits,nupper format."
msgstr ""

#: ../src/msec/help.py:65
msgid "Set the root umask."
msgstr ""

#: ../src/msec/help.py:67
msgid "Enable checking for additions/removals of sgid files."
msgstr ""

#: ../src/msec/help.py:69
msgid "Activate ethernet cards promiscuity check."
msgstr ""

#: ../src/msec/help.py:71
msgid "Enable AppArmor security framework on boot"
msgstr ""

#: ../src/msec/help.py:73
msgid "Allow local users to connect to X server. Accepted arguments: yes (all connections are allowed), local (only local connection), no (no connection)."
msgstr ""

#: ../src/msec/help.py:75
msgid "Enable checking for files/directories writable by everybody."
msgstr ""

#: ../src/msec/help.py:77
msgid "Log syslog messages on console terminal 12."
msgstr ""

#: ../src/msec/help.py:79
msgid "Enable IP spoofing protection."
msgstr ""

#: ../src/msec/help.py:81
msgid "Defines the base security level, on top of which the current configuration is based."
msgstr ""

#: ../src/msec/help.py:83
msgid "Enable periodic permission checking for system files."
msgstr ""

#: ../src/msec/help.py:85
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: ../src/msec/help.py:87
msgid "Allow system reboot and shutdown to local users."
msgstr ""

#: ../src/msec/help.py:89
msgid "Enables logging of periodic checks to system log."
msgstr ""

#: ../src/msec/help.py:91
msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
msgstr ""

#: ../src/msec/help.py:93
msgid "Enable password-related checks, such as empty passwords and strange super-user accounts."
msgstr ""

#: ../src/msec/help.py:95
msgid "Set the password history length to prevent password reuse. This is not supported by pam_tcb."
msgstr ""

#: ../src/msec/help.py:97
msgid "Enable daily security checks."
msgstr ""

#: ../src/msec/help.py:99
msgid "Allow direct root login on terminal."
msgstr ""

#: ../src/msec/help.py:101
msgid "Enable checking for unowned files."
msgstr ""

#: ../src/msec/help.py:103
msgid "Allow display managers (kdm and gdm) to display list of local users."
msgstr ""

#: ../src/msec/help.py:105
msgid "Enforce MSEC file directory permissions on system startup. If this parameter is set to 'enforce', system permissions will be enforced automatically, according to system security settings."
msgstr ""

#: ../src/msec/help.py:107
msgid "Show security notifications in system tray using libnotify."
msgstr ""

#: ../src/msec/help.py:109
msgid "Allow remote root login via sshd. If yes, login is allowed. If without-password, only public-key authentication logins are allowed. See sshd_config(5) man page for more information."
msgstr ""

#: ../src/msec/help.py:111
msgid "Perform hourly security check for changes in system configuration."
msgstr ""

#: ../src/msec/help.py:113
msgid "Ask for root password when going to single user level (man sulogin(8))."
msgstr ""

#: ../src/msec/help.py:115
msgid "Allow to export display when passing from the root account to the other users. See pam_xauth(8) for more details."
msgstr ""

#: ../src/msec/help.py:117
msgid "Set the user umask."
msgstr ""

#: ../src/msec/help.py:119
msgid "Accept ICMP echo."
msgstr ""

#: ../src/msec/help.py:121
msgid "Allow full access to network services controlled by tcp_wrapper (see hosts.deny(5)). If yes, all services are allowed. If local, only connections to local services are authorized. If no, the services must be authorized manually in /etc/hosts.allow (see hosts.allow(5))."
msgstr ""

#: ../src/msec/help.py:123
msgid "Enforce MSEC settings on system startup"
msgstr ""

#: ../src/msec/help.py:125
msgid "Enable periodic security check results to terminal."
msgstr ""

#: ../src/msec/help.py:127
msgid "Enable PolicyKit security framework for all users. If this option is not enabled, only users in wheel group may change advanced PolicyKit permissions and settings"
msgstr ""

#: ../src/msec/libmsec.py:326
msgid "%s modified so launched command: %s"
msgstr ""

#: ../src/msec/libmsec.py:335
msgid "%s modified so should have run command: %s"
msgstr ""

#: ../src/msec/libmsec.py:437 ../src/msec/libmsec.py:469
msgid "deleted %s"
msgstr ""

#: ../src/msec/libmsec.py:455
msgid "touched file %s"
msgstr ""

#: ../src/msec/libmsec.py:475
msgid "made symbolic link from %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:478
msgid "moved file %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:528 ../src/msec/libmsec.py:544
msgid "set variable %s to %s in %s"
msgstr ""

#: ../src/msec/libmsec.py:755
msgid "Error loading plugin '%s' from %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:769
msgid "Invalid callback: %s"
msgstr ""

#: ../src/msec/libmsec.py:778
msgid "Plugin %s not found"
msgstr ""

#: ../src/msec/libmsec.py:785
msgid "Not supported function '%s' in '%s'"
msgstr ""

#: ../src/msec/libmsec.py:792 ../src/msec/libmsec.py:1575
msgid "In check-only mode, nothing is written back to disk."
msgstr ""

#: ../src/msec/libmsec.py:809
msgid "'%s' is not available in this version"
msgstr ""

#: ../src/msec/libmsec.py:819
msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
msgstr ""

#: ../src/msec/libmsec.py:834
msgid "Allowing unrestricted chkconfig for packages"
msgstr ""

#: ../src/msec/libmsec.py:839
msgid "Restricting chkconfig for packages according to \"%s\" profile"
msgstr ""

#: ../src/msec/libmsec.py:849
msgid "Setting root umask to %s"
msgstr ""

#: ../src/msec/libmsec.py:859
msgid "Setting users umask to %s"
msgstr ""

#: ../src/msec/libmsec.py:880
msgid "Allowing users to connect X server from everywhere"
msgstr ""

#: ../src/msec/libmsec.py:883
msgid "Allowing users to connect X server from localhost"
msgstr ""

#: ../src/msec/libmsec.py:886
msgid "Restricting X server connection to the console user"
msgstr ""

#: ../src/msec/libmsec.py:889
msgid "invalid allow_x_connections arg: %s"
msgstr ""

#: ../src/msec/libmsec.py:912
msgid "Allowing the X server to listen to tcp connections"
msgstr ""

#: ../src/msec/libmsec.py:923
msgid "Forbidding the X server to listen to tcp connection"
msgstr ""

#: ../src/msec/libmsec.py:939
msgid "Invalid shell timeout \"%s\""
msgstr ""

#: ../src/msec/libmsec.py:947
msgid "Setting shell timeout to %s"
msgstr ""

#: ../src/msec/libmsec.py:955
msgid "Invalid shell history size \"%s\""
msgstr ""

#: ../src/msec/libmsec.py:966
msgid "Setting shell history size to %s"
msgstr ""

#: ../src/msec/libmsec.py:970
msgid "Removing limit on shell history size"
msgstr ""

#: ../src/msec/libmsec.py:1009
msgid "Allowing reboot and shutdown to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1016
msgid "Allowing SysRq key to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1019
msgid "Allowing Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1023
msgid "Allowing Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1026
msgid "Allowing Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/libmsec.py:1030
msgid "Forbidding reboot and shutdown to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1038
msgid "Forbidding SysRq key to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1041
msgid "Forbidding Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1045
msgid "Forbidding Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1048
msgid "Forbidding Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/libmsec.py:1062
msgid "Allowing list of users in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1066
msgid "Allowing list of users in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1071
msgid "Forbidding list of users in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1075
msgid "Forbidding list of users in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1089
msgid "Allowing remote root login"
msgstr ""

#: ../src/msec/libmsec.py:1093
msgid "Forbidding remote root login"
msgstr ""

#: ../src/msec/libmsec.py:1097
msgid "Allowing remote root login only by passphrase"
msgstr ""

#: ../src/msec/libmsec.py:1109
msgid "Allowing autologin"
msgstr ""

#: ../src/msec/libmsec.py:1112
msgid "Forbidding autologin"
msgstr ""

#: ../src/msec/libmsec.py:1117
msgid "Activating password in boot loader"
msgstr ""

#: ../src/msec/libmsec.py:1131
msgid "Removing password in boot loader"
msgstr ""

#: ../src/msec/libmsec.py:1146
msgid "Enabling log on console"
msgstr ""

#: ../src/msec/libmsec.py:1150
msgid "Disabling log on console"
msgstr ""

#: ../src/msec/libmsec.py:1162
msgid "Activating daily security check"
msgstr ""

#: ../src/msec/libmsec.py:1166
msgid "Disabling daily security check"
msgstr ""

#: ../src/msec/libmsec.py:1183
msgid "Authorizing all services"
msgstr ""

#: ../src/msec/libmsec.py:1187
msgid "Disabling all services"
msgstr ""

#: ../src/msec/libmsec.py:1191
msgid "Disabling non local services"
msgstr ""

#: ../src/msec/libmsec.py:1224
msgid "Enabling name resolution spoofing protection"
msgstr ""

#: ../src/msec/libmsec.py:1229
msgid "Disabling name resolution spoofing protection"
msgstr ""

#: ../src/msec/libmsec.py:1257
msgid "Enabling sulogin in single user runlevel"
msgstr ""

#: ../src/msec/libmsec.py:1261
msgid "Disabling sulogin in single user runlevel"
msgstr ""

#: ../src/msec/libmsec.py:1272
msgid "Enabling msec periodic runs"
msgstr ""

#: ../src/msec/libmsec.py:1276
msgid "Disabling msec periodic runs"
msgstr ""

#: ../src/msec/libmsec.py:1289
msgid "Enabling crontab and at"
msgstr ""

#: ../src/msec/libmsec.py:1296
msgid "Disabling crontab and at"
msgstr ""

#: ../src/msec/libmsec.py:1308
msgid "Allowing export display from root"
msgstr ""

#: ../src/msec/libmsec.py:1312
msgid "Forbidding export display from root"
msgstr ""

#: ../src/msec/libmsec.py:1323
msgid "Activating periodic promiscuity check"
msgstr ""

#: ../src/msec/libmsec.py:1327
msgid "Disabling periodic promiscuity check"
msgstr ""

#: ../src/msec/libmsec.py:1353
msgid "Allowing direct root login"
msgstr ""

#: ../src/msec/libmsec.py:1370
msgid "Forbidding direct root login"
msgstr ""

#: ../src/msec/libmsec.py:1505
msgid "user name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:1517
msgid "user name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:1529
msgid "group name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:1541
msgid "group name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:1551
msgid "Unable to check /proc/mounts. Assuming all file systems are local."
msgstr ""

#: ../src/msec/libmsec.py:1590
msgid "Forcing ownership of %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:1594
msgid "Error changing user on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:1596
msgid "Wrong owner of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:1599
msgid "Enforcing group on %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:1603
msgid "Error changing group on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:1605
msgid "Wrong group of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:1610
msgid "Enforcing permissions on %s to %o"
msgstr ""

#: ../src/msec/libmsec.py:1614
msgid "Error changing permissions on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:1616
msgid "Wrong permissions of %s: should be %o"
msgstr ""

#: ../src/msec/libmsec.py:1633
msgid "bad permissions for '%s': '%s'"
msgstr ""

#: ../src/msec/libmsec.py:1658
msgid "Non local file: \"%s\". Nothing changed."
msgstr ""

#: ../src/msec/libmsec.py:1700
msgid "Checking paths: %s"
msgstr ""

#: ../src/msec/msec.py:86 ../src/msec/msecperms.py:99
msgid "Invalid security level '%s'."
msgstr ""

#: ../src/msec/msec.py:109 ../src/msec/msecperms.py:128
msgid ""
"Msec: Mandriva Security Center (%s)\n"
msgstr ""

#: ../src/msec/msec.py:110 ../src/msec/msecperms.py:129
msgid "Error: This application must be executed by root!"
msgstr ""

#: ../src/msec/msec.py:111 ../src/msec/msecperms.py:130
msgid "Run with --help to get help."
msgstr ""

#: ../src/msec/msec.py:133 ../src/msec/msecperms.py:151
msgid "Level '%s' not found, aborting."
msgstr ""

#: ../src/msec/msec.py:135 ../src/msec/msecperms.py:153
msgid "Switching to '%s' level."
msgstr ""

#: ../src/msec/msec.py:151 ../src/msec/msecperms.py:170
msgid "Unable to save config!"
msgstr ""

#: ../src/msec/msecgui.py:50
msgid ""
"<big><b>Choose security level</b></big>\n"
"This application allows you to configure your system security. If you wish\n"
"to activate it, choose the appropriate security level: "
msgstr ""

#: ../src/msec/msecgui.py:54
msgid "This profile configures a reasonably safe set of security features. It activates several non-intrusive periodic system checks. This is the suggested level for Desktop."
msgstr ""

#: ../src/msec/msecgui.py:56
msgid "This profile is configured to provide maximum security, even at the cost of limiting the remote access to the system. It also runs a wider set of periodic checks. This level is suggested for Servers and security-concerned systems . "
msgstr ""

#: ../src/msec/msecgui.py:59
msgid ""
"<big><b>System security options</b></big>\n"
"These options control the local security configuration, such as the login restrictions,\n"
"password configurations, integration with other security tools, and default file creation\n"
"permissions.  "
msgstr ""

#: ../src/msec/msecgui.py:64
msgid ""
"<big><b>Network security options</b></big>\n"
"These options define the network security against remote threats, unauthorized accesses,\n"
"and breakin attempts.  "
msgstr ""

#: ../src/msec/msecgui.py:68
msgid ""
"<big><b>Periodic security checks</b></big>\n"
"These options configure the security checks that should be executed periodically.  "
msgstr ""

#: ../src/msec/msecgui.py:71
msgid ""
"<big><b>File permissions</b></big>\n"
"These options allow to fine-tune system permissions for important files and directories.\n"
"The following permissions are checked periodically, and any change to the owner, group,\n"
"or current permission is reported. The permissions can be enforced, automatically\n"
"changing them to the specified values when a change is detected.  "
msgstr ""

#: ../src/msec/msecgui.py:77
msgid "Save and apply new configuration?"
msgstr ""

#: ../src/msec/msecgui.py:143
msgid "_File"
msgstr ""

#: ../src/msec/msecgui.py:145
msgid "_Save configuration"
msgstr ""

#: ../src/msec/msecgui.py:147
msgid "_Import configuration"
msgstr ""

#: ../src/msec/msecgui.py:148
msgid "_Export configuration"
msgstr ""

#: ../src/msec/msecgui.py:150
msgid "_Quit"
msgstr ""

#: ../src/msec/msecgui.py:152 ../src/msec/msecgui.py:154
msgid "_Help"
msgstr ""

#: ../src/msec/msecgui.py:155
msgid "_About"
msgstr ""

#: ../src/msec/msecgui.py:182
msgid "MSEC: System Security and Audit"
msgstr ""

#: ../src/msec/msecgui.py:200
msgid "Basic security"
msgstr ""

#: ../src/msec/msecgui.py:201
msgid "System security"
msgstr ""

#: ../src/msec/msecgui.py:202
msgid "Network security"
msgstr ""

#: ../src/msec/msecgui.py:203
msgid "Periodic checks"
msgstr ""

#: ../src/msec/msecgui.py:204 ../src/msec/msecgui.py:809
msgid "Permissions"
msgstr ""

#: ../src/msec/msecgui.py:237
msgid "MSEC option changes"
msgstr ""

#: ../src/msec/msecgui.py:237
msgid "option"
msgstr ""

#: ../src/msec/msecgui.py:238
msgid "System permissions changes"
msgstr ""

#: ../src/msec/msecgui.py:238
msgid "permission check"
msgstr ""

#: ../src/msec/msecgui.py:248
msgid "changed %s <b>%s</b> (%s -> %s)"
msgstr ""

#: ../src/msec/msecgui.py:253
msgid "added %s <b>%s</b> (%s)"
msgstr ""

#: ../src/msec/msecgui.py:258
msgid "removed %s <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:262
msgid "no changes"
msgstr ""

#: ../src/msec/msecgui.py:274
msgid "Saving changes.."
msgstr ""

#: ../src/msec/msecgui.py:308
msgid ""
"<b>%s:</b> <i>%s</i>\n"
msgstr ""

#: ../src/msec/msecgui.py:315
msgid "<b>MSEC test run results:</b> <i>%s</i>"
msgstr ""

#: ../src/msec/msecgui.py:323
msgid "Details"
msgstr ""

#: ../src/msec/msecgui.py:329
msgid "MSEC messages (%s): %d"
msgstr ""

#: ../src/msec/msecgui.py:343
msgid "Details (%d changes).."
msgstr ""

#: ../src/msec/msecgui.py:388
msgid "No base msec level specified, using '%s'"
msgstr ""

#: ../src/msec/msecgui.py:391
msgid "Detected base msec level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:396
msgid "Custom base config level '%s' found. Will default to '%s'"
msgstr ""

#: ../src/msec/msecgui.py:424
msgid "Security Option"
msgstr ""

#: ../src/msec/msecgui.py:434
msgid "Description"
msgstr ""

#: ../src/msec/msecgui.py:439
msgid "Value"
msgstr ""

#: ../src/msec/msecgui.py:449
msgid "Invalid option '%s'!"
msgstr ""

#: ../src/msec/msecgui.py:499
msgid "Enable MSEC tool"
msgstr ""

#: ../src/msec/msecgui.py:506
msgid "Select the base security level"
msgstr ""

#: ../src/msec/msecgui.py:510
msgid "Standard"
msgstr ""

#: ../src/msec/msecgui.py:523
msgid "Secure"
msgstr ""

#: ../src/msec/msecgui.py:540
msgid "Send security alerts by email"
msgstr ""

#: ../src/msec/msecgui.py:547
msgid "System administrator email address:"
msgstr ""

#: ../src/msec/msecgui.py:566
msgid "Display security alerts on desktop"
msgstr ""

#: ../src/msec/msecgui.py:727
msgid "Enable periodic security checks"
msgstr ""

#: ../src/msec/msecgui.py:791
msgid "Path"
msgstr ""

#: ../src/msec/msecgui.py:797
msgid "User"
msgstr ""

#: ../src/msec/msecgui.py:803
msgid "Group"
msgstr ""

#: ../src/msec/msecgui.py:817
msgid "Enforce"
msgstr ""

#: ../src/msec/msecgui.py:861
msgid "Reset to default level permissions"
msgstr ""

#: ../src/msec/msecgui.py:866
msgid "Add a rule"
msgstr ""

#: ../src/msec/msecgui.py:871
msgid "Delete"
msgstr ""

#: ../src/msec/msecgui.py:954
msgid "Changing permissions for %s"
msgstr ""

#: ../src/msec/msecgui.py:961
msgid "Adding new permission check"
msgstr ""

#: ../src/msec/msecgui.py:973
msgid ""
"Changing permissions on <b>%s</b>\n"
"Please specify new permissions, or use 'current' to keep current permissions.\n"
msgstr ""

#: ../src/msec/msecgui.py:981
msgid "File: "
msgstr ""

#: ../src/msec/msecgui.py:989
msgid "User: "
msgstr ""

#: ../src/msec/msecgui.py:997
msgid "Group: "
msgstr ""

#: ../src/msec/msecgui.py:1005
msgid "Permissions: "
msgstr ""

#: ../src/msec/msecgui.py:1066
msgid "Select new value for %s"
msgstr ""

#: ../src/msec/msecgui.py:1075
msgid ""
"<i>%s</i>\n"
"\n"
"\tCurrent value:\t\t\t<i>%s</i>\n"
"\t%sStandard level value:\t<i>%s</i>%s\n"
"\t%sSecure level value:\t\t<i>%s</i>%s\n"
msgstr ""

#: ../src/msec/msecgui.py:1086
msgid "New value:"
msgstr ""

#: ../src/msec/msecgui.py:1148
msgid "Save your changes?"
msgstr ""

#: ../src/msec/msecgui.py:1150
msgid "_Cancel"
msgstr ""

#: ../src/msec/msecgui.py:1151
msgid "_Ignore"
msgstr ""

#: ../src/msec/msecgui.py:1152
msgid "_Save"
msgstr ""

#: ../src/msec/msecgui.py:1154
msgid "Do you want to save changes before closing?"
msgstr ""

#: ../src/msec/plugins/pam.py:68
msgid "Using password to authenticate users"
msgstr ""

#: ../src/msec/plugins/pam.py:72
msgid "Don't use password to authenticate users"
msgstr ""

#: ../src/msec/plugins/pam.py:83
msgid "Password history not supported with pam_tcb."
msgstr ""

#: ../src/msec/plugins/pam.py:91
msgid "Invalid maximum password history length: \"%s\""
msgstr ""

#: ../src/msec/plugins/pam.py:106
msgid "Setting password history to %d."
msgstr ""

#: ../src/msec/plugins/pam.py:112
msgid "Disabling password history"
msgstr ""

#: ../src/msec/plugins/pam.py:124
msgid "Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter"
msgstr ""

#: ../src/msec/plugins/pam.py:145
msgid "Setting minimum password length %d"
msgstr ""

#: ../src/msec/plugins/pam.py:169
msgid "Allowing su only from wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:173
msgid "no wheel group"
msgstr ""

#: ../src/msec/plugins/pam.py:177
msgid "wheel group is empty"
msgstr ""

#: ../src/msec/plugins/pam.py:185
msgid "Allowing su for all"
msgstr ""

#: ../src/msec/plugins/pam.py:204
msgid "Allowing transparent root access for wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:211
msgid "Disabling transparent root access for wheel group members"
msgstr ""