#
# Alastair McKinstry <mckinstry@computer.org>, 2002
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-09-08 22:17+BRT\n"
"PO-Revision-Date: 2005-09-12 18:04+0200\n"
"Last-Translator: Alastair McKinstry <mckinstry@computer.org>\n"
"Language-Team: Irish <ga@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../src/msec/help.py:14
msgid "Enable checking for changes in firewall settings."
msgstr ""

#: ../src/msec/help.py:16
msgid "Enable IP spoofing protection."
msgstr ""

#: ../src/msec/help.py:18
msgid "Send mail reports even if no changes were detected."
msgstr ""

#: ../src/msec/help.py:20
msgid "Accept broadcasted ICMP echo."
msgstr ""

#: ../src/msec/help.py:22
msgid ""
"Allow users to authenticate with their passwords for sudo. If this parameter "
"is set to 'wheel', users must belong to the 'wheel' group to be able to use "
"sudo"
msgstr ""

#: ../src/msec/help.py:24
msgid "Allow X server to accept connections from network on tcp port 6000."
msgstr ""

#: ../src/msec/help.py:26
msgid "Enable checking for known rootkits using chkrootkit."
msgstr ""

#: ../src/msec/help.py:28
msgid "Enable checking for additions/removals of suid root files."
msgstr ""

#: ../src/msec/help.py:30
msgid ""
"Enable crontab and at for users. Put allowed users in /etc/cron.allow and /"
"etc/at.allow (see man at(1) and crontab(1))."
msgstr ""

#: ../src/msec/help.py:32
msgid "Accept bogus IPv4 error messages."
msgstr ""

#: ../src/msec/help.py:34
msgid "Enable checksum verification for suid files."
msgstr ""

#: ../src/msec/help.py:36
msgid "User email to receive security notifications."
msgstr ""

#: ../src/msec/help.py:38
#, fuzzy
msgid "Allow autologin."
msgstr "Uath-Logann"

#: ../src/msec/help.py:40
msgid "Allow only users in wheel group to su to root."
msgstr ""

#: ../src/msec/help.py:42
msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
msgstr ""

#: ../src/msec/help.py:44
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: ../src/msec/help.py:46
msgid ""
"Enable permission checking on users' files that should not be owned by "
"someone else, or writable."
msgstr ""

#: ../src/msec/help.py:48
msgid ""
"Creates the symlink /etc/security/msec/server to point to /etc/security/msec/"
"server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --"
"add to decide to add a service if it is present in the file during the "
"installation of packages. By default, two presets are provided: local (which "
"only enables local services) and remote (which also enables some remote "
"services considered safe). Note that the allowed services must be placed "
"manually into the server.SERVER_LEVEL files when necessary."
msgstr ""

#: ../src/msec/help.py:50
msgid ""
"Use password to authenticate users. Take EXTREME care when disabling "
"passwords, as it will leave the machine vulnerable."
msgstr ""

#: ../src/msec/help.py:52
msgid ""
"Set umask option for mounting vfat and ntfs partitions. If umask is '-1', "
"default system umask is used."
msgstr ""

#: ../src/msec/help.py:54
msgid "Enable checking for open network ports."
msgstr ""

#: ../src/msec/help.py:56
msgid "Enable logging of strange network packets."
msgstr ""

#: ../src/msec/help.py:58
msgid "Allow root access without password for the members of the wheel group."
msgstr ""

#: ../src/msec/help.py:60
msgid "Fix owner and group of unowned files to use nobody/nogroup."
msgstr ""

#: ../src/msec/help.py:62
msgid "Send security check results by email."
msgstr ""

#: ../src/msec/help.py:64
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters, using length,ndigits,nupper format."
msgstr ""

#: ../src/msec/help.py:66
#, fuzzy
msgid "Set the root umask."
msgstr "Gan pasfhocal"

#: ../src/msec/help.py:68
msgid "Enable checking for additions/removals of sgid files."
msgstr ""

#: ../src/msec/help.py:70
msgid ""
"Enable verification of integrity of installed RPM packages. This will notify "
"you if checksums of the installed files were changed, showing separate "
"results for binary and configuration files."
msgstr ""

#: ../src/msec/help.py:72
msgid ""
"Allow local users to connect to X server. Accepted arguments: yes (all "
"connections are allowed), local (only local connection), no (no connection)."
msgstr ""

#: ../src/msec/help.py:74
msgid "Enable checking for files/directories writable by everybody."
msgstr ""

#: ../src/msec/help.py:76
msgid "Log syslog messages on console terminal 12."
msgstr ""

#: ../src/msec/help.py:78
msgid "Enable name resolution spoofing protection."
msgstr ""

#: ../src/msec/help.py:80
msgid ""
"Defines the base security level, on top of which the current configuration "
"is based."
msgstr ""

#: ../src/msec/help.py:82
msgid ""
"Enable periodic permission checking for files specified in msec policy. If "
"set to yes, the permissions are verified on every run. If set to enforce, "
"incorrect permissions are restored to the ones specified in msec security "
"policy."
msgstr ""

#: ../src/msec/help.py:84
msgid ""
"Enable verification for changes in the installed RPM packages. This will "
"notify you when new packages are installed or removed."
msgstr ""

#: ../src/msec/help.py:86
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: ../src/msec/help.py:88
msgid "Allow system reboot and shutdown to local users."
msgstr ""

#: ../src/msec/help.py:90
msgid "Enables logging of periodic checks to system log."
msgstr ""

#: ../src/msec/help.py:92
msgid "Enable checking for changes in system groups."
msgstr ""

#: ../src/msec/help.py:94
msgid ""
"Enable password-related checks, such as empty passwords and strange super-"
"user accounts."
msgstr ""

#: ../src/msec/help.py:96
msgid ""
"Set the password history length to prevent password reuse. This is not "
"supported by pam_tcb."
msgstr ""

#: ../src/msec/help.py:98
msgid "Enable daily security checks."
msgstr ""

#: ../src/msec/help.py:100
msgid ""
"Use secure location for temporary files. If this parameter is set to 'yes', "
"user home directory will be used for temporary files. Otherwise, /tmp will "
"be used."
msgstr ""

#: ../src/msec/help.py:102
#, fuzzy
msgid "Allow direct root login on terminal."
msgstr "Scríos Printéir"

#: ../src/msec/help.py:104
msgid "Enable checking for changes in system users."
msgstr ""

#: ../src/msec/help.py:106
msgid "Enable checking for unowned files."
msgstr ""

#: ../src/msec/help.py:108
msgid "Allow display managers (kdm and gdm) to display list of local users."
msgstr ""

#: ../src/msec/help.py:110
msgid ""
"Enforce MSEC file directory permissions on system startup. If this parameter "
"is set to 'enforce', system permissions will be enforced automatically, "
"according to system security settings."
msgstr ""

#: ../src/msec/help.py:112
msgid "Include current directory into user PATH by default"
msgstr ""

#: ../src/msec/help.py:114
msgid "Show security notifications in system tray using libnotify."
msgstr ""

#: ../src/msec/help.py:116
msgid ""
"Allow remote root login via sshd. If yes, login is allowed. If without-"
"password, only public-key authentication logins are allowed. See sshd_config"
"(5) man page for more information."
msgstr ""

#: ../src/msec/help.py:118
msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
msgstr ""

#: ../src/msec/help.py:120
msgid "Ask for root password when going to single user level (man sulogin(8))."
msgstr ""

#: ../src/msec/help.py:122
msgid ""
"Allow to export display when passing from the root account to the other "
"users. See pam_xauth(8) for more details."
msgstr ""

#: ../src/msec/help.py:124
#, fuzzy
msgid "Set the user umask."
msgstr "Ainm úsáideora"

#: ../src/msec/help.py:126
msgid "Accept ICMP echo."
msgstr ""

#: ../src/msec/help.py:128
msgid ""
"Allow full access to network services controlled by tcp_wrapper (see hosts."
"deny(5)). If yes, all services are allowed. If local, only connections to "
"local services are authorized. If no, the services must be authorized "
"manually in /etc/hosts.allow (see hosts.allow(5))."
msgstr ""

#: ../src/msec/help.py:130
msgid "Activate ethernet cards promiscuity check."
msgstr ""

#: ../src/msec/help.py:132
msgid "Perform hourly security check for changes in system configuration."
msgstr ""

#: ../src/msec/help.py:134
msgid "Enforce MSEC settings on system startup"
msgstr ""

#: ../src/msec/help.py:136
msgid "Enable periodic security check results to terminal."
msgstr ""

#: ../src/msec/libmsec.py:338
msgid "%s modified so launched command: %s"
msgstr ""

#: ../src/msec/libmsec.py:347
msgid "%s modified so should have run command: %s"
msgstr ""

#: ../src/msec/libmsec.py:449 ../src/msec/libmsec.py:481
#, fuzzy
msgid "deleted %s"
msgstr "Scríos"

#: ../src/msec/libmsec.py:467
#, fuzzy
msgid "touched file %s"
msgstr "Níl a leithéid de chomhad ann"

#: ../src/msec/libmsec.py:487
#, fuzzy
msgid "made symbolic link from %s to %s"
msgstr "Ag athrú ó ext2 go ext3"

#: ../src/msec/libmsec.py:490
msgid "moved file %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:540 ../src/msec/libmsec.py:556
msgid "set variable %s to %s in %s"
msgstr ""

#: ../src/msec/libmsec.py:767
msgid "Error loading plugin '%s' from %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:781
msgid "Invalid callback: %s"
msgstr ""

#: ../src/msec/libmsec.py:790
msgid "Plugin %s not found"
msgstr ""

#: ../src/msec/libmsec.py:797
msgid "Not supported function '%s' in '%s'"
msgstr ""

#: ../src/msec/libmsec.py:804 ../src/msec/libmsec.py:1638
msgid "In check-only mode, nothing is written back to disk."
msgstr ""

#: ../src/msec/libmsec.py:821
msgid "'%s' is not available in this version"
msgstr ""

#: ../src/msec/libmsec.py:831
msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
msgstr ""

#: ../src/msec/libmsec.py:846
msgid "Allowing unrestricted chkconfig for packages"
msgstr ""

#: ../src/msec/libmsec.py:851
msgid "Restricting chkconfig for packages according to \"%s\" profile"
msgstr ""

#: ../src/msec/libmsec.py:861
#, fuzzy
msgid "Setting root umask to %s"
msgstr "Ag athrú ó ext2 go ext3"

#: ../src/msec/libmsec.py:871
#, fuzzy
msgid "Setting users umask to %s"
msgstr "Ag athrú ó ext2 go ext3"

#: ../src/msec/libmsec.py:892
msgid "Allowing users to connect X server from everywhere"
msgstr ""

#: ../src/msec/libmsec.py:895
msgid "Allowing users to connect X server from localhost"
msgstr ""

#: ../src/msec/libmsec.py:898
msgid "Restricting X server connection to the console user"
msgstr ""

#: ../src/msec/libmsec.py:901
msgid "invalid allow_x_connections arg: %s"
msgstr ""

#: ../src/msec/libmsec.py:924
#, fuzzy
msgid "Allowing the X server to listen to tcp connections"
msgstr "Cumraigh nasc ghréasán"

#: ../src/msec/libmsec.py:935
msgid "Forbidding the X server to listen to tcp connection"
msgstr ""

#: ../src/msec/libmsec.py:951
msgid "Invalid shell timeout \"%s\""
msgstr ""

#: ../src/msec/libmsec.py:959
msgid "Setting shell timeout to %s"
msgstr ""

#: ../src/msec/libmsec.py:967
msgid "Invalid shell history size \"%s\""
msgstr ""

#: ../src/msec/libmsec.py:978
msgid "Setting shell history size to %s"
msgstr ""

#: ../src/msec/libmsec.py:982
msgid "Removing limit on shell history size"
msgstr ""

#: ../src/msec/libmsec.py:991
msgid "Invalid file system umask \"%s\""
msgstr ""

#: ../src/msec/libmsec.py:1025
msgid "Allowing reboot and shutdown to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1032
msgid "Allowing SysRq key to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1035
msgid "Allowing Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1039
msgid "Allowing Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1042
msgid "Allowing Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/libmsec.py:1046
msgid "Forbidding reboot and shutdown to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1054
msgid "Forbidding SysRq key to the console user"
msgstr ""

#: ../src/msec/libmsec.py:1057
msgid "Forbidding Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1061
msgid "Forbidding Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1064
msgid "Forbidding Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/libmsec.py:1078
msgid "Allowing list of users in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1082
msgid "Allowing list of users in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1087
msgid "Forbidding list of users in KDM"
msgstr ""

#: ../src/msec/libmsec.py:1091
msgid "Forbidding list of users in GDM"
msgstr ""

#: ../src/msec/libmsec.py:1105
#, fuzzy
msgid "Allowing remote root login"
msgstr "Scríos Printéir"

#: ../src/msec/libmsec.py:1109
#, fuzzy
msgid "Forbidding remote root login"
msgstr "Scríos Printéir"

#: ../src/msec/libmsec.py:1113
#, fuzzy
msgid "Allowing remote root login only by passphrase"
msgstr "Scríos Printéir"

#: ../src/msec/libmsec.py:1125
#, fuzzy
msgid "Allowing autologin"
msgstr "Uath-Logann"

#: ../src/msec/libmsec.py:1128
#, fuzzy
msgid "Forbidding autologin"
msgstr "Uath-Logann"

#: ../src/msec/libmsec.py:1133
msgid "Activating password in boot loader"
msgstr ""

#: ../src/msec/libmsec.py:1147
#, fuzzy
msgid "Removing password in boot loader"
msgstr "Gan pasfhocal"

#: ../src/msec/libmsec.py:1162
msgid "Enabling log on console"
msgstr ""

#: ../src/msec/libmsec.py:1166
msgid "Disabling log on console"
msgstr ""

#: ../src/msec/libmsec.py:1178
msgid "Activating daily security check"
msgstr ""

#: ../src/msec/libmsec.py:1182
msgid "Disabling daily security check"
msgstr ""

#: ../src/msec/libmsec.py:1199
msgid "Authorizing all services"
msgstr ""

#: ../src/msec/libmsec.py:1203
msgid "Disabling all services"
msgstr ""

#: ../src/msec/libmsec.py:1207
msgid "Disabling non local services"
msgstr ""

#: ../src/msec/libmsec.py:1240
msgid "Enabling name resolution spoofing protection"
msgstr ""

#: ../src/msec/libmsec.py:1245
msgid "Disabling name resolution spoofing protection"
msgstr ""

#: ../src/msec/libmsec.py:1273
msgid "Enabling sulogin in single user runlevel"
msgstr ""

#: ../src/msec/libmsec.py:1277
msgid "Disabling sulogin in single user runlevel"
msgstr ""

#: ../src/msec/libmsec.py:1288
#, fuzzy
msgid "Enabling msec periodic runs"
msgstr "Ag formáidiú rann %s"

#: ../src/msec/libmsec.py:1292
msgid "Disabling msec periodic runs"
msgstr ""

#: ../src/msec/libmsec.py:1305
msgid "Enabling crontab and at"
msgstr ""

#: ../src/msec/libmsec.py:1312
msgid "Disabling crontab and at"
msgstr ""

#: ../src/msec/libmsec.py:1324
msgid "Allowing export display from root"
msgstr ""

#: ../src/msec/libmsec.py:1328
msgid "Forbidding export display from root"
msgstr ""

#: ../src/msec/libmsec.py:1339
msgid "Activating periodic promiscuity check"
msgstr ""

#: ../src/msec/libmsec.py:1343
msgid "Disabling periodic promiscuity check"
msgstr ""

#: ../src/msec/libmsec.py:1369
#, fuzzy
msgid "Allowing direct root login"
msgstr "Scríos Printéir"

#: ../src/msec/libmsec.py:1386
#, fuzzy
msgid "Forbidding direct root login"
msgstr "Scríos Printéir"

#: ../src/msec/libmsec.py:1516
msgid "Using secure location for temporary files"
msgstr ""

#: ../src/msec/libmsec.py:1518
msgid "Not using secure location for temporary files"
msgstr ""

#: ../src/msec/libmsec.py:1538
msgid "Allowing including current directory in path"
msgstr ""

#: ../src/msec/libmsec.py:1541
msgid "Not allowing including current directory in path"
msgstr ""

#: ../src/msec/libmsec.py:1568
#, fuzzy
msgid "user name %s not found"
msgstr "Tá an ainm úsáideora ró-fhada"

#: ../src/msec/libmsec.py:1580
msgid "user name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:1592
msgid "group name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:1604
msgid "group name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:1614
msgid "Unable to check /proc/mounts. Assuming all file systems are local."
msgstr ""

#: ../src/msec/libmsec.py:1653
#, fuzzy
msgid "Forcing ownership of %s to %s"
msgstr "Ag athrú ó ext2 go ext3"

#: ../src/msec/libmsec.py:1657
#, fuzzy
msgid "Error changing user on %s: %s"
msgstr "Earráid ag léamh comhad %s"

#: ../src/msec/libmsec.py:1659
msgid "Wrong owner of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:1662
#, fuzzy
msgid "Enforcing group on %s to %s"
msgstr "Ag athrú ó ext2 go ext3"

#: ../src/msec/libmsec.py:1666
msgid "Error changing group on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:1668
msgid "Wrong group of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:1673
msgid "Enforcing permissions on %s to %o"
msgstr ""

#: ../src/msec/libmsec.py:1677
msgid "Error changing permissions on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:1679
msgid "Wrong permissions of %s: should be %o"
msgstr ""

#: ../src/msec/libmsec.py:1696
msgid "bad permissions for '%s': '%s'"
msgstr ""

#: ../src/msec/libmsec.py:1721
msgid "Non local file: \"%s\". Nothing changed."
msgstr ""

#: ../src/msec/libmsec.py:1763
#, fuzzy
msgid "Checking paths: %s"
msgstr "Ag seiceáil %s"

#: ../src/msec/msec.py:85 ../src/msec/msecperms.py:98
#, fuzzy
msgid "Invalid security level '%s'."
msgstr "Leibhéal Slándála"

#: ../src/msec/msec.py:108 ../src/msec/msecperms.py:127
msgid "Msec: Mandriva Security Center (%s)\n"
msgstr ""

#: ../src/msec/msec.py:109 ../src/msec/msecperms.py:128
msgid "Error: This application must be executed by root!"
msgstr ""

#: ../src/msec/msec.py:110 ../src/msec/msecperms.py:129
msgid "Run with --help to get help."
msgstr ""

#: ../src/msec/msec.py:132 ../src/msec/msecperms.py:150
msgid "Level '%s' not found, aborting."
msgstr ""

#: ../src/msec/msec.py:134 ../src/msec/msecperms.py:152
#, fuzzy
msgid "Switching to '%s' level."
msgstr "Ag athrú ó ext2 go ext3"

#: ../src/msec/msec.py:151 ../src/msec/msecperms.py:170
msgid "Unable to save config!"
msgstr ""

#: ../src/msec/msecgui.py:50
msgid ""
"<big><b>Choose security level</b></big>\n"
"This application allows you to configure your system security. If you wish\n"
"to activate it, choose the appropriate security level: "
msgstr ""

#: ../src/msec/msecgui.py:54
msgid ""
"This profile configures a reasonably safe set of security features. It "
"activates several non-intrusive periodic system checks. This is the "
"suggested level for Desktop."
msgstr ""

#: ../src/msec/msecgui.py:56
msgid ""
"This profile is configured to provide maximum security, even at the cost of "
"limiting the remote access to the system. It also runs a wider set of "
"periodic checks. This level is suggested for Servers and security-concerned "
"systems . "
msgstr ""

#: ../src/msec/msecgui.py:59
msgid ""
"<big><b>System security options</b></big>\n"
"These options control the local security configuration, such as the login "
"restrictions,\n"
"password configurations, integration with other security tools, and default "
"file creation\n"
"permissions.  "
msgstr ""

#: ../src/msec/msecgui.py:64
msgid ""
"<big><b>Network security options</b></big>\n"
"These options define the network security against remote threats, "
"unauthorized accesses,\n"
"and breakin attempts.  "
msgstr ""

#: ../src/msec/msecgui.py:68
msgid ""
"<big><b>Periodic security checks</b></big>\n"
"These options configure the security checks that should be executed "
"periodically.  "
msgstr ""

#: ../src/msec/msecgui.py:71
msgid ""
"<big><b>Exceptions</b></big>\n"
"Here you can configure the allowed exceptions for msec periodic security\n"
"checks. For each supported test, you may add as many exceptions as you want\n"
"for each check. Note that each exception is parsed as a regexp."
msgstr ""

#: ../src/msec/msecgui.py:76
msgid ""
"<big><b>File permissions</b></big>\n"
"These options allow to fine-tune system permissions for important files and "
"directories.\n"
"The following permissions are checked periodically, and any change to the "
"owner, group,\n"
"or current permission is reported. The permissions can be enforced, "
"automatically\n"
"changing them to the specified values when a change is detected.  "
msgstr ""

#: ../src/msec/msecgui.py:82
#, fuzzy
msgid "Save and apply new configuration?"
msgstr "Fan tamall... ag cur na cumraíochta i bhfeidhm"

#: ../src/msec/msecgui.py:150
#, fuzzy
msgid "_File"
msgstr "An tSile"

#: ../src/msec/msecgui.py:152
#, fuzzy
msgid "_Save configuration"
msgstr "Cumraíocht fuaime"

#: ../src/msec/msecgui.py:154
#, fuzzy
msgid "_Import configuration"
msgstr "Cumraíocht fuaime"

#: ../src/msec/msecgui.py:155
#, fuzzy
msgid "_Export configuration"
msgstr "Cumraíocht fuaime"

#: ../src/msec/msecgui.py:157
#, fuzzy
msgid "_Quit"
msgstr "Éalaigh"

#: ../src/msec/msecgui.py:159 ../src/msec/msecgui.py:161
#, fuzzy
msgid "_Help"
msgstr "C_úidiú"

#: ../src/msec/msecgui.py:162
#, fuzzy
msgid "_About"
msgstr "Eolas"

#: ../src/msec/msecgui.py:190
#, fuzzy
msgid "MSEC: System Security and Audit"
msgstr "Mód Coras"

#: ../src/msec/msecgui.py:205
#, fuzzy
msgid "Save and apply current policy"
msgstr "Fan tamall... ag cur na cumraíochta i bhfeidhm"

#: ../src/msec/msecgui.py:211
#, fuzzy
msgid "Quit"
msgstr "Éalaigh"

#: ../src/msec/msecgui.py:227
#, fuzzy
msgid "Basic security"
msgstr "Slándáil"

#: ../src/msec/msecgui.py:228
#, fuzzy
msgid "System security"
msgstr "Slándáil"

#: ../src/msec/msecgui.py:229
#, fuzzy
msgid "Network security"
msgstr "Próifíl líonra"

#: ../src/msec/msecgui.py:230
msgid "Periodic checks"
msgstr ""

#: ../src/msec/msecgui.py:231
#, fuzzy
msgid "Exceptions"
msgstr "Roghnachais"

#: ../src/msec/msecgui.py:232 ../src/msec/msecgui.py:909
msgid "Permissions"
msgstr "Ceadanna"

#: ../src/msec/msecgui.py:265
msgid "MSEC option changes"
msgstr ""

#: ../src/msec/msecgui.py:265
#, fuzzy
msgid "option"
msgstr "Roghnachais"

#: ../src/msec/msecgui.py:266
#, fuzzy
msgid "System permissions changes"
msgstr "Roghanna an Chórais"

#: ../src/msec/msecgui.py:266
#, fuzzy
msgid "permission check"
msgstr "Ceadanna"

#: ../src/msec/msecgui.py:276
msgid "changed %s <b>%s</b> (%s -> %s)"
msgstr ""

#: ../src/msec/msecgui.py:281
msgid "added %s <b>%s</b> (%s)"
msgstr ""

#: ../src/msec/msecgui.py:286
msgid "removed %s <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:290
#, fuzzy
msgid "no changes"
msgstr "Gan roinnt"

#: ../src/msec/msecgui.py:302
#, fuzzy
msgid "Saving changes.."
msgstr "Ag baint pacáistí..."

#: ../src/msec/msecgui.py:336
msgid "<b>%s:</b> <i>%s</i>\n"
msgstr ""

#: ../src/msec/msecgui.py:343
msgid "<b>MSEC test run results:</b> <i>%s</i>"
msgstr ""

#: ../src/msec/msecgui.py:351
msgid "Details"
msgstr "Sonraí"

#: ../src/msec/msecgui.py:357
msgid "MSEC messages (%s): %d"
msgstr ""

#: ../src/msec/msecgui.py:371
msgid "Details (%d changes).."
msgstr ""

#: ../src/msec/msecgui.py:419
msgid "No base msec level specified, using '%s'"
msgstr ""

#: ../src/msec/msecgui.py:422
msgid "Detected base msec level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:427
msgid "Custom base config level '%s' found. Will default to '%s'"
msgstr ""

#: ../src/msec/msecgui.py:455
#, fuzzy
msgid "Security Option"
msgstr "Cumraigh roghanna"

#: ../src/msec/msecgui.py:465
#, fuzzy
msgid "Description"
msgstr "Cumraigh roghanna"

#: ../src/msec/msecgui.py:470
#, fuzzy
msgid "Value"
msgstr "Palau"

#: ../src/msec/msecgui.py:480
msgid "Invalid option '%s'!"
msgstr ""

#: ../src/msec/msecgui.py:530
#, fuzzy
msgid "Enable MSEC tool"
msgstr "Cumasaigh dúiseacht ón dlúthdhiosca?"

#: ../src/msec/msecgui.py:537
#, fuzzy
msgid "Select the base security level"
msgstr "Roghnaigh liebhéal slándáil"

#: ../src/msec/msecgui.py:541
msgid "Standard"
msgstr "Caighdeánach"

#: ../src/msec/msecgui.py:554
#, fuzzy
msgid "Secure"
msgstr "Slándáil"

#: ../src/msec/msecgui.py:571
#, fuzzy
msgid "Send security alerts by email"
msgstr "Roghnaigh liebhéal slándáil"

#: ../src/msec/msecgui.py:578
#, fuzzy
msgid "System administrator email address:"
msgstr "Socraigh pasfhocal root"

#: ../src/msec/msecgui.py:597
msgid "Display security alerts on desktop"
msgstr ""

#: ../src/msec/msecgui.py:758
msgid "Enable periodic security checks"
msgstr ""

#: ../src/msec/msecgui.py:820
#, fuzzy
msgid "Security check"
msgstr "Cumraigh roghanna"

#: ../src/msec/msecgui.py:826
#, fuzzy
msgid "Exception"
msgstr "Roghnachais"

#: ../src/msec/msecgui.py:847 ../src/msec/msecgui.py:966
#, fuzzy
msgid "Add a rule"
msgstr "Suimigh úsáideoir"

#: ../src/msec/msecgui.py:852 ../src/msec/msecgui.py:971
msgid "Delete"
msgstr "Scríos"

#: ../src/msec/msecgui.py:891
msgid "Path"
msgstr "Conair"

#: ../src/msec/msecgui.py:897
#, fuzzy
msgid "User"
msgstr "ID Úsáideoir"

#: ../src/msec/msecgui.py:903
#, fuzzy
msgid "Group"
msgstr "ID Grupa"

#: ../src/msec/msecgui.py:917
#, fuzzy
msgid "Enforce"
msgstr "Déan neamhaird de"

#: ../src/msec/msecgui.py:961
msgid "Reset to default level permissions"
msgstr ""

#: ../src/msec/msecgui.py:1067
msgid "Editing exception"
msgstr ""

#: ../src/msec/msecgui.py:1072
msgid "Adding new exception"
msgstr ""

#: ../src/msec/msecgui.py:1079
msgid ""
"Editing exception. Please select the correspondent msec check and exception "
"value\n"
msgstr ""

#: ../src/msec/msecgui.py:1086
msgid "Check: "
msgstr ""

#: ../src/msec/msecgui.py:1101
msgid "Exception: "
msgstr ""

#: ../src/msec/msecgui.py:1136
msgid "Changing permissions for %s"
msgstr ""

#: ../src/msec/msecgui.py:1143
msgid "Adding new permission check"
msgstr ""

#: ../src/msec/msecgui.py:1155
msgid ""
"Changing permissions on <b>%s</b>\n"
"Please specify new permissions, or use 'current' to keep current "
"permissions.\n"
msgstr ""

#: ../src/msec/msecgui.py:1155
msgid "new file"
msgstr ""

#: ../src/msec/msecgui.py:1163
#, fuzzy
msgid "File: "
msgstr "/_Comhad"

#: ../src/msec/msecgui.py:1171
#, fuzzy
msgid "User: "
msgstr "ID Úsáideoir"

#: ../src/msec/msecgui.py:1179
#, fuzzy
msgid "Group: "
msgstr "ID Grupa"

#: ../src/msec/msecgui.py:1187
#, fuzzy
msgid "Permissions: "
msgstr "Ceadanna"

#: ../src/msec/msecgui.py:1248
msgid "Select new value for %s"
msgstr ""

#: ../src/msec/msecgui.py:1257
msgid ""
"<i>%s</i>\n"
"\n"
"\tCurrent value:\t\t\t<i>%s</i>\n"
"\t%sStandard level value:\t<i>%s</i>%s\n"
"\t%sSecure level value:\t\t<i>%s</i>%s\n"
msgstr ""

#: ../src/msec/msecgui.py:1268
#, fuzzy
msgid "New value:"
msgstr "An Nua-Chaladóin"

#: ../src/msec/msecgui.py:1330
msgid "Save your changes?"
msgstr ""

#: ../src/msec/msecgui.py:1332
#, fuzzy
msgid "_Cancel"
msgstr "Cealaigh"

#: ../src/msec/msecgui.py:1333
#, fuzzy
msgid "_Ignore"
msgstr "Déan neamhaird de"

#: ../src/msec/msecgui.py:1334
#, fuzzy
msgid "_Save"
msgstr "Sábháil"

#: ../src/msec/msecgui.py:1336
#, fuzzy
msgid "Do you want to save changes before closing?"
msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"

#: ../src/msec/plugins/pam.py:67
msgid "Using password to authenticate users"
msgstr ""

#: ../src/msec/plugins/pam.py:71
msgid "Don't use password to authenticate users"
msgstr ""

#: ../src/msec/plugins/pam.py:82
msgid "Password history not supported with pam_tcb."
msgstr ""

#: ../src/msec/plugins/pam.py:90
#, fuzzy
msgid "Invalid maximum password history length: \"%s\""
msgstr "Tá an pasfhocal seo ro-shimplí"

#: ../src/msec/plugins/pam.py:105
#, fuzzy
msgid "Setting password history to %d."
msgstr "Tá an pasfhocal seo ro-shimplí"

#: ../src/msec/plugins/pam.py:111
#, fuzzy
msgid "Disabling password history"
msgstr "Tá an pasfhocal seo ro-shimplí"

#: ../src/msec/plugins/pam.py:123
msgid ""
"Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter"
msgstr ""

#: ../src/msec/plugins/pam.py:144
msgid "Setting minimum password length %d"
msgstr ""

#: ../src/msec/plugins/pam.py:168
msgid "Allowing su only from wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:172
msgid "no wheel group"
msgstr ""

#: ../src/msec/plugins/pam.py:176
msgid "wheel group is empty"
msgstr ""

#: ../src/msec/plugins/pam.py:184
msgid "Allowing su for all"
msgstr ""

#: ../src/msec/plugins/pam.py:203
msgid "Allowing transparent root access for wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:210
msgid "Disabling transparent root access for wheel group members"
msgstr ""