# translation of DrakX.po to furlan # Copyright (C) 2004 Free Software Foundation, Inc. # Andrea Gracco , 2004. # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-08-30 16:40+BRT\n" "PO-Revision-Date: 2004-06-28 17:41+0200\n" "Last-Translator: Andrea Gracco \n" "Language-Team: furlan \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.3\n" #: ../src/msec/help.py:14 msgid "Enable checking for changes in firewall settings." msgstr "" #: ../src/msec/help.py:16 msgid "Enable IP spoofing protection." msgstr "" #: ../src/msec/help.py:18 msgid "Send mail reports even if no changes were detected." msgstr "" #: ../src/msec/help.py:20 msgid "Accept broadcasted ICMP echo." msgstr "" #: ../src/msec/help.py:22 msgid "" "Allow users to authenticate with their passwords for sudo. If this parameter " "is set to 'wheel', users must belong to the 'wheel' group to be able to use " "sudo" msgstr "" #: ../src/msec/help.py:24 msgid "Allow X server to accept connections from network on tcp port 6000." msgstr "" #: ../src/msec/help.py:26 msgid "Enable checking for known rootkits using chkrootkit." msgstr "" #: ../src/msec/help.py:28 msgid "Enable checking for additions/removals of suid root files." msgstr "" #: ../src/msec/help.py:30 msgid "" "Enable crontab and at for users. Put allowed users in /etc/cron.allow and /" "etc/at.allow (see man at(1) and crontab(1))." msgstr "" #: ../src/msec/help.py:32 msgid "Accept bogus IPv4 error messages." msgstr "" #: ../src/msec/help.py:34 msgid "Enable checksum verification for suid files." msgstr "" #: ../src/msec/help.py:36 msgid "User email to receive security notifications." msgstr "" #: ../src/msec/help.py:38 #, fuzzy msgid "Allow autologin." msgstr "Acès automatic" #: ../src/msec/help.py:40 msgid "Allow only users in wheel group to su to root." msgstr "" #: ../src/msec/help.py:42 msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))." msgstr "" #: ../src/msec/help.py:44 msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: ../src/msec/help.py:46 msgid "" "Enable permission checking on users' files that should not be owned by " "someone else, or writable." msgstr "" #: ../src/msec/help.py:48 msgid "" "Creates the symlink /etc/security/msec/server to point to /etc/security/msec/" "server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --" "add to decide to add a service if it is present in the file during the " "installation of packages. By default, two presets are provided: local (which " "only enables local services) and remote (which also enables some remote " "services considered safe). Note that the allowed services must be placed " "manually into the server.SERVER_LEVEL files when necessary." msgstr "" #: ../src/msec/help.py:50 msgid "" "Use password to authenticate users. Take EXTREME care when disabling " "passwords, as it will leave the machine vulnerable." msgstr "" #: ../src/msec/help.py:52 msgid "" "Set umask option for mounting vfat and ntfs partitions. If umask is '-1', " "default system umask is used." msgstr "" #: ../src/msec/help.py:54 msgid "Enable checking for open network ports." msgstr "" #: ../src/msec/help.py:56 msgid "Enable logging of strange network packets." msgstr "" #: ../src/msec/help.py:58 msgid "Allow root access without password for the members of the wheel group." msgstr "" #: ../src/msec/help.py:60 msgid "Fix owner and group of unowned files to use nobody/nogroup." msgstr "" #: ../src/msec/help.py:62 msgid "Send security check results by email." msgstr "" #: ../src/msec/help.py:64 msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters, using length,ndigits,nupper format." msgstr "" #: ../src/msec/help.py:66 msgid "Set the root umask." msgstr "" #: ../src/msec/help.py:68 msgid "Enable checking for additions/removals of sgid files." msgstr "" #: ../src/msec/help.py:70 msgid "" "Enable verification of integrity of installed RPM packages. This will notify " "you if checksums of the installed files were changed, showing separate " "results for binary and configuration files." msgstr "" #: ../src/msec/help.py:72 msgid "Enable AppArmor security framework on boot" msgstr "" #: ../src/msec/help.py:74 msgid "" "Allow local users to connect to X server. Accepted arguments: yes (all " "connections are allowed), local (only local connection), no (no connection)." msgstr "" #: ../src/msec/help.py:76 msgid "Enable checking for files/directories writable by everybody." msgstr "" #: ../src/msec/help.py:78 msgid "Log syslog messages on console terminal 12." msgstr "" #: ../src/msec/help.py:80 msgid "Enable name resolution spoofing protection." msgstr "" #: ../src/msec/help.py:82 msgid "" "Defines the base security level, on top of which the current configuration " "is based." msgstr "" #: ../src/msec/help.py:84 msgid "Enable periodic permission checking for system files." msgstr "" #: ../src/msec/help.py:86 msgid "" "Enable verification for changes in the installed RPM packages. This will " "notify you when new packages are installed or removed." msgstr "" #: ../src/msec/help.py:88 msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: ../src/msec/help.py:90 msgid "Allow system reboot and shutdown to local users." msgstr "" #: ../src/msec/help.py:92 msgid "Enables logging of periodic checks to system log." msgstr "" #: ../src/msec/help.py:94 msgid "Enable checking for changes in system groups." msgstr "" #: ../src/msec/help.py:96 msgid "" "Enable password-related checks, such as empty passwords and strange super-" "user accounts." msgstr "" #: ../src/msec/help.py:98 msgid "" "Set the password history length to prevent password reuse. This is not " "supported by pam_tcb." msgstr "" #: ../src/msec/help.py:100 msgid "Enable daily security checks." msgstr "" #: ../src/msec/help.py:102 msgid "" "Use secure location for temporary files. If this parameter is set to 'yes', " "user home directory will be used for temporary files. Otherwise, /tmp will " "be used." msgstr "" #: ../src/msec/help.py:104 msgid "Allow direct root login on terminal." msgstr "" #: ../src/msec/help.py:106 msgid "Enable checking for changes in system users." msgstr "" #: ../src/msec/help.py:108 msgid "Enable checking for unowned files." msgstr "" #: ../src/msec/help.py:110 msgid "Allow display managers (kdm and gdm) to display list of local users." msgstr "" #: ../src/msec/help.py:112 msgid "" "Enforce MSEC file directory permissions on system startup. If this parameter " "is set to 'enforce', system permissions will be enforced automatically, " "according to system security settings." msgstr "" #: ../src/msec/help.py:114 msgid "Include current directory into user PATH by default" msgstr "" #: ../src/msec/help.py:116 msgid "Show security notifications in system tray using libnotify." msgstr "" #: ../src/msec/help.py:118 msgid "" "Allow remote root login via sshd. If yes, login is allowed. If without-" "password, only public-key authentication logins are allowed. See sshd_config" "(5) man page for more information." msgstr "" #: ../src/msec/help.py:120 msgid "Enable checking for dangerous options in users' .rhosts/.shosts files." msgstr "" #: ../src/msec/help.py:122 msgid "Ask for root password when going to single user level (man sulogin(8))." msgstr "" #: ../src/msec/help.py:124 msgid "" "Allow to export display when passing from the root account to the other " "users. See pam_xauth(8) for more details." msgstr "" #: ../src/msec/help.py:126 msgid "Set the user umask." msgstr "" #: ../src/msec/help.py:128 msgid "Accept ICMP echo." msgstr "" #: ../src/msec/help.py:130 msgid "" "Allow full access to network services controlled by tcp_wrapper (see hosts." "deny(5)). If yes, all services are allowed. If local, only connections to " "local services are authorized. If no, the services must be authorized " "manually in /etc/hosts.allow (see hosts.allow(5))." msgstr "" #: ../src/msec/help.py:132 msgid "Activate ethernet cards promiscuity check." msgstr "" #: ../src/msec/help.py:134 msgid "Perform hourly security check for changes in system configuration." msgstr "" #: ../src/msec/help.py:136 msgid "Enforce MSEC settings on system startup" msgstr "" #: ../src/msec/help.py:138 msgid "Enable periodic security check results to terminal." msgstr "" #: ../src/msec/help.py:140 msgid "" "Enable PolicyKit security framework for all users. If this option is not " "enabled, only users in wheel group may change advanced PolicyKit permissions " "and settings" msgstr "" #: ../src/msec/libmsec.py:338 msgid "%s modified so launched command: %s" msgstr "" #: ../src/msec/libmsec.py:347 msgid "%s modified so should have run command: %s" msgstr "" #: ../src/msec/libmsec.py:449 ../src/msec/libmsec.py:481 #, fuzzy msgid "deleted %s" msgstr "Scancele" #: ../src/msec/libmsec.py:467 #, fuzzy msgid "touched file %s" msgstr "File locâi" #: ../src/msec/libmsec.py:487 #, fuzzy msgid "made symbolic link from %s to %s" msgstr "O cambii di ext2 a ext3" #: ../src/msec/libmsec.py:490 msgid "moved file %s to %s" msgstr "" #: ../src/msec/libmsec.py:540 ../src/msec/libmsec.py:556 msgid "set variable %s to %s in %s" msgstr "" #: ../src/msec/libmsec.py:767 msgid "Error loading plugin '%s' from %s: %s" msgstr "" #: ../src/msec/libmsec.py:781 msgid "Invalid callback: %s" msgstr "" #: ../src/msec/libmsec.py:790 msgid "Plugin %s not found" msgstr "" #: ../src/msec/libmsec.py:797 msgid "Not supported function '%s' in '%s'" msgstr "" #: ../src/msec/libmsec.py:804 ../src/msec/libmsec.py:1638 msgid "In check-only mode, nothing is written back to disk." msgstr "" #: ../src/msec/libmsec.py:821 msgid "'%s' is not available in this version" msgstr "" #: ../src/msec/libmsec.py:831 msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'." msgstr "" #: ../src/msec/libmsec.py:846 msgid "Allowing unrestricted chkconfig for packages" msgstr "" #: ../src/msec/libmsec.py:851 msgid "Restricting chkconfig for packages according to \"%s\" profile" msgstr "" #: ../src/msec/libmsec.py:861 #, fuzzy msgid "Setting root umask to %s" msgstr "O cambii di ext2 a ext3" #: ../src/msec/libmsec.py:871 #, fuzzy msgid "Setting users umask to %s" msgstr "O cambii di ext2 a ext3" #: ../src/msec/libmsec.py:892 msgid "Allowing users to connect X server from everywhere" msgstr "" #: ../src/msec/libmsec.py:895 msgid "Allowing users to connect X server from localhost" msgstr "" #: ../src/msec/libmsec.py:898 msgid "Restricting X server connection to the console user" msgstr "" #: ../src/msec/libmsec.py:901 msgid "invalid allow_x_connections arg: %s" msgstr "" #: ../src/msec/libmsec.py:924 msgid "Allowing the X server to listen to tcp connections" msgstr "" #: ../src/msec/libmsec.py:935 msgid "Forbidding the X server to listen to tcp connection" msgstr "" #: ../src/msec/libmsec.py:951 msgid "Invalid shell timeout \"%s\"" msgstr "" #: ../src/msec/libmsec.py:959 msgid "Setting shell timeout to %s" msgstr "" #: ../src/msec/libmsec.py:967 msgid "Invalid shell history size \"%s\"" msgstr "" #: ../src/msec/libmsec.py:978 msgid "Setting shell history size to %s" msgstr "" #: ../src/msec/libmsec.py:982 msgid "Removing limit on shell history size" msgstr "" #: ../src/msec/libmsec.py:991 msgid "Invalid file system umask \"%s\"" msgstr "" #: ../src/msec/libmsec.py:1025 msgid "Allowing reboot and shutdown to the console user" msgstr "" #: ../src/msec/libmsec.py:1032 msgid "Allowing SysRq key to the console user" msgstr "" #: ../src/msec/libmsec.py:1035 msgid "Allowing Shutdown/Reboot in GDM" msgstr "" #: ../src/msec/libmsec.py:1039 msgid "Allowing Shutdown/Reboot in KDM" msgstr "" #: ../src/msec/libmsec.py:1042 msgid "Allowing Ctrl-Alt-Del from console" msgstr "" #: ../src/msec/libmsec.py:1046 msgid "Forbidding reboot and shutdown to the console user" msgstr "" #: ../src/msec/libmsec.py:1054 msgid "Forbidding SysRq key to the console user" msgstr "" #: ../src/msec/libmsec.py:1057 msgid "Forbidding Shutdown/Reboot in GDM" msgstr "" #: ../src/msec/libmsec.py:1061 msgid "Forbidding Shutdown/Reboot in KDM" msgstr "" #: ../src/msec/libmsec.py:1064 msgid "Forbidding Ctrl-Alt-Del from console" msgstr "" #: ../src/msec/libmsec.py:1078 msgid "Allowing list of users in KDM" msgstr "" #: ../src/msec/libmsec.py:1082 msgid "Allowing list of users in GDM" msgstr "" #: ../src/msec/libmsec.py:1087 msgid "Forbidding list of users in KDM" msgstr "" #: ../src/msec/libmsec.py:1091 msgid "Forbidding list of users in GDM" msgstr "" #: ../src/msec/libmsec.py:1105 #, fuzzy msgid "Allowing remote root login" msgstr "Acès automatic" #: ../src/msec/libmsec.py:1109 msgid "Forbidding remote root login" msgstr "" #: ../src/msec/libmsec.py:1113 msgid "Allowing remote root login only by passphrase" msgstr "" #: ../src/msec/libmsec.py:1125 #, fuzzy msgid "Allowing autologin" msgstr "Acès automatic" #: ../src/msec/libmsec.py:1128 #, fuzzy msgid "Forbidding autologin" msgstr "Acès automatic" #: ../src/msec/libmsec.py:1133 msgid "Activating password in boot loader" msgstr "" #: ../src/msec/libmsec.py:1147 msgid "Removing password in boot loader" msgstr "" #: ../src/msec/libmsec.py:1162 msgid "Enabling log on console" msgstr "" #: ../src/msec/libmsec.py:1166 msgid "Disabling log on console" msgstr "" #: ../src/msec/libmsec.py:1178 msgid "Activating daily security check" msgstr "" #: ../src/msec/libmsec.py:1182 msgid "Disabling daily security check" msgstr "" #: ../src/msec/libmsec.py:1199 msgid "Authorizing all services" msgstr "" #: ../src/msec/libmsec.py:1203 msgid "Disabling all services" msgstr "" #: ../src/msec/libmsec.py:1207 msgid "Disabling non local services" msgstr "" #: ../src/msec/libmsec.py:1240 msgid "Enabling name resolution spoofing protection" msgstr "" #: ../src/msec/libmsec.py:1245 msgid "Disabling name resolution spoofing protection" msgstr "" #: ../src/msec/libmsec.py:1273 msgid "Enabling sulogin in single user runlevel" msgstr "" #: ../src/msec/libmsec.py:1277 msgid "Disabling sulogin in single user runlevel" msgstr "" #: ../src/msec/libmsec.py:1288 msgid "Enabling msec periodic runs" msgstr "" #: ../src/msec/libmsec.py:1292 msgid "Disabling msec periodic runs" msgstr "" #: ../src/msec/libmsec.py:1305 msgid "Enabling crontab and at" msgstr "" #: ../src/msec/libmsec.py:1312 msgid "Disabling crontab and at" msgstr "" #: ../src/msec/libmsec.py:1324 msgid "Allowing export display from root" msgstr "" #: ../src/msec/libmsec.py:1328 msgid "Forbidding export display from root" msgstr "" #: ../src/msec/libmsec.py:1339 msgid "Activating periodic promiscuity check" msgstr "" #: ../src/msec/libmsec.py:1343 msgid "Disabling periodic promiscuity check" msgstr "" #: ../src/msec/libmsec.py:1369 #, fuzzy msgid "Allowing direct root login" msgstr "Acès automatic" #: ../src/msec/libmsec.py:1386 msgid "Forbidding direct root login" msgstr "" #: ../src/msec/libmsec.py:1516 msgid "Using secure location for temporary files" msgstr "" #: ../src/msec/libmsec.py:1518 msgid "Not using secure location for temporary files" msgstr "" #: ../src/msec/libmsec.py:1538 msgid "Allowing including current directory in path" msgstr "" #: ../src/msec/libmsec.py:1541 msgid "Not allowing including current directory in path" msgstr "" #: ../src/msec/libmsec.py:1568 #, fuzzy msgid "user name %s not found" msgstr "Il non utent al è masse lunc" #: ../src/msec/libmsec.py:1580 msgid "user name not found for id %d" msgstr "" #: ../src/msec/libmsec.py:1592 msgid "group name %s not found" msgstr "" #: ../src/msec/libmsec.py:1604 msgid "group name not found for id %d" msgstr "" #: ../src/msec/libmsec.py:1614 msgid "Unable to check /proc/mounts. Assuming all file systems are local." msgstr "" #: ../src/msec/libmsec.py:1653 #, fuzzy msgid "Forcing ownership of %s to %s" msgstr "O cambii di ext2 a ext3" #: ../src/msec/libmsec.py:1657 msgid "Error changing user on %s: %s" msgstr "" #: ../src/msec/libmsec.py:1659 msgid "Wrong owner of %s: should be %s" msgstr "" #: ../src/msec/libmsec.py:1662 #, fuzzy msgid "Enforcing group on %s to %s" msgstr "O cambii di ext2 a ext3" #: ../src/msec/libmsec.py:1666 msgid "Error changing group on %s: %s" msgstr "" #: ../src/msec/libmsec.py:1668 msgid "Wrong group of %s: should be %s" msgstr "" #: ../src/msec/libmsec.py:1673 msgid "Enforcing permissions on %s to %o" msgstr "" #: ../src/msec/libmsec.py:1677 msgid "Error changing permissions on %s: %s" msgstr "" #: ../src/msec/libmsec.py:1679 msgid "Wrong permissions of %s: should be %o" msgstr "" #: ../src/msec/libmsec.py:1696 msgid "bad permissions for '%s': '%s'" msgstr "" #: ../src/msec/libmsec.py:1721 msgid "Non local file: \"%s\". Nothing changed." msgstr "" #: ../src/msec/libmsec.py:1763 msgid "Checking paths: %s" msgstr "" #: ../src/msec/msec.py:85 ../src/msec/msecperms.py:98 #, fuzzy msgid "Invalid security level '%s'." msgstr "Nivel di Sigurece" #: ../src/msec/msec.py:108 ../src/msec/msecperms.py:127 msgid "Msec: Mandriva Security Center (%s)\n" msgstr "" #: ../src/msec/msec.py:109 ../src/msec/msecperms.py:128 msgid "Error: This application must be executed by root!" msgstr "" #: ../src/msec/msec.py:110 ../src/msec/msecperms.py:129 msgid "Run with --help to get help." msgstr "" #: ../src/msec/msec.py:132 ../src/msec/msecperms.py:150 msgid "Level '%s' not found, aborting." msgstr "" #: ../src/msec/msec.py:134 ../src/msec/msecperms.py:152 #, fuzzy msgid "Switching to '%s' level." msgstr "O cambii di ext2 a ext3" #: ../src/msec/msec.py:150 ../src/msec/msecperms.py:169 msgid "Unable to save config!" msgstr "" #: ../src/msec/msecgui.py:50 msgid "" "Choose security level\n" "This application allows you to configure your system security. If you wish\n" "to activate it, choose the appropriate security level: " msgstr "" #: ../src/msec/msecgui.py:54 msgid "" "This profile configures a reasonably safe set of security features. It " "activates several non-intrusive periodic system checks. This is the " "suggested level for Desktop." msgstr "" #: ../src/msec/msecgui.py:56 msgid "" "This profile is configured to provide maximum security, even at the cost of " "limiting the remote access to the system. It also runs a wider set of " "periodic checks. This level is suggested for Servers and security-concerned " "systems . " msgstr "" #: ../src/msec/msecgui.py:59 msgid "" "System security options\n" "These options control the local security configuration, such as the login " "restrictions,\n" "password configurations, integration with other security tools, and default " "file creation\n" "permissions. " msgstr "" #: ../src/msec/msecgui.py:64 msgid "" "Network security options\n" "These options define the network security against remote threats, " "unauthorized accesses,\n" "and breakin attempts. " msgstr "" #: ../src/msec/msecgui.py:68 msgid "" "Periodic security checks\n" "These options configure the security checks that should be executed " "periodically. " msgstr "" #: ../src/msec/msecgui.py:71 msgid "" "File permissions\n" "These options allow to fine-tune system permissions for important files and " "directories.\n" "The following permissions are checked periodically, and any change to the " "owner, group,\n" "or current permission is reported. The permissions can be enforced, " "automatically\n" "changing them to the specified values when a change is detected. " msgstr "" #: ../src/msec/msecgui.py:77 msgid "Save and apply new configuration?" msgstr "" #: ../src/msec/msecgui.py:143 #, fuzzy msgid "_File" msgstr "Cile" #: ../src/msec/msecgui.py:145 #, fuzzy msgid "_Save configuration" msgstr "Configurazion dal stîl di inviament" #: ../src/msec/msecgui.py:147 #, fuzzy msgid "_Import configuration" msgstr "Configurazion dal stîl di inviament" #: ../src/msec/msecgui.py:148 #, fuzzy msgid "_Export configuration" msgstr "Configurazion dal stîl di inviament" #: ../src/msec/msecgui.py:150 #, fuzzy msgid "_Quit" msgstr "Jessî" #: ../src/msec/msecgui.py:152 ../src/msec/msecgui.py:154 #, fuzzy msgid "_Help" msgstr "Jutori" #: ../src/msec/msecgui.py:155 #, fuzzy msgid "_About" msgstr "Informazions" #: ../src/msec/msecgui.py:183 msgid "MSEC: System Security and Audit" msgstr "" #: ../src/msec/msecgui.py:198 msgid "Save and apply current policy" msgstr "" #: ../src/msec/msecgui.py:204 #, fuzzy msgid "Quit" msgstr "Jessî" #: ../src/msec/msecgui.py:220 #, fuzzy msgid "Basic security" msgstr "Sigurece" #: ../src/msec/msecgui.py:221 #, fuzzy msgid "System security" msgstr "Sigurece" #: ../src/msec/msecgui.py:222 #, fuzzy msgid "Network security" msgstr "Gnûf profîl..." #: ../src/msec/msecgui.py:223 msgid "Periodic checks" msgstr "" #: ../src/msec/msecgui.py:224 ../src/msec/msecgui.py:829 msgid "Permissions" msgstr "Permès" #: ../src/msec/msecgui.py:257 msgid "MSEC option changes" msgstr "" #: ../src/msec/msecgui.py:257 #, fuzzy msgid "option" msgstr "Opzions" #: ../src/msec/msecgui.py:258 msgid "System permissions changes" msgstr "" #: ../src/msec/msecgui.py:258 #, fuzzy msgid "permission check" msgstr "Permès" #: ../src/msec/msecgui.py:268 msgid "changed %s %s (%s -> %s)" msgstr "" #: ../src/msec/msecgui.py:273 msgid "added %s %s (%s)" msgstr "" #: ../src/msec/msecgui.py:278 msgid "removed %s %s" msgstr "" #: ../src/msec/msecgui.py:282 #, fuzzy msgid "no changes" msgstr "Nissune condivision" #: ../src/msec/msecgui.py:294 #, fuzzy msgid "Saving changes.." msgstr "O rimôf i pachets..." #: ../src/msec/msecgui.py:328 msgid "%s: %s\n" msgstr "" #: ../src/msec/msecgui.py:335 msgid "MSEC test run results: %s" msgstr "" #: ../src/msec/msecgui.py:343 msgid "Details" msgstr "" #: ../src/msec/msecgui.py:349 msgid "MSEC messages (%s): %d" msgstr "" #: ../src/msec/msecgui.py:363 msgid "Details (%d changes).." msgstr "" #: ../src/msec/msecgui.py:408 msgid "No base msec level specified, using '%s'" msgstr "" #: ../src/msec/msecgui.py:411 msgid "Detected base msec level '%s'" msgstr "" #: ../src/msec/msecgui.py:416 msgid "Custom base config level '%s' found. Will default to '%s'" msgstr "" #: ../src/msec/msecgui.py:444 #, fuzzy msgid "Security Option" msgstr "Sigurece" #: ../src/msec/msecgui.py:454 msgid "Description" msgstr "Descrizion" #: ../src/msec/msecgui.py:459 #, fuzzy msgid "Value" msgstr "Palau" #: ../src/msec/msecgui.py:469 msgid "Invalid option '%s'!" msgstr "" #: ../src/msec/msecgui.py:519 #, fuzzy msgid "Enable MSEC tool" msgstr "Abilite l'inviament di CD?" #: ../src/msec/msecgui.py:526 #, fuzzy msgid "Select the base security level" msgstr "Nivel di Sigurece" #: ../src/msec/msecgui.py:530 msgid "Standard" msgstr "" #: ../src/msec/msecgui.py:543 #, fuzzy msgid "Secure" msgstr "Sigurece" #: ../src/msec/msecgui.py:560 #, fuzzy msgid "Send security alerts by email" msgstr "Nivel di Sigurece" #: ../src/msec/msecgui.py:567 msgid "System administrator email address:" msgstr "" #: ../src/msec/msecgui.py:586 msgid "Display security alerts on desktop" msgstr "" #: ../src/msec/msecgui.py:747 msgid "Enable periodic security checks" msgstr "" #: ../src/msec/msecgui.py:811 msgid "Path" msgstr "" #: ../src/msec/msecgui.py:817 #, fuzzy msgid "User" msgstr "ID Utent" #: ../src/msec/msecgui.py:823 #, fuzzy msgid "Group" msgstr "ID Grop" #: ../src/msec/msecgui.py:837 msgid "Enforce" msgstr "" #: ../src/msec/msecgui.py:881 msgid "Reset to default level permissions" msgstr "" #: ../src/msec/msecgui.py:886 #, fuzzy msgid "Add a rule" msgstr "Zonte utent" #: ../src/msec/msecgui.py:891 msgid "Delete" msgstr "Scancele" #: ../src/msec/msecgui.py:974 msgid "Changing permissions for %s" msgstr "" #: ../src/msec/msecgui.py:981 msgid "Adding new permission check" msgstr "" #: ../src/msec/msecgui.py:993 msgid "" "Changing permissions on %s\n" "Please specify new permissions, or use 'current' to keep current " "permissions.\n" msgstr "" #: ../src/msec/msecgui.py:1001 #, fuzzy msgid "File: " msgstr "/_File" #: ../src/msec/msecgui.py:1009 #, fuzzy msgid "User: " msgstr "ID Utent" #: ../src/msec/msecgui.py:1017 #, fuzzy msgid "Group: " msgstr "ID Grop" #: ../src/msec/msecgui.py:1025 #, fuzzy msgid "Permissions: " msgstr "Permès" #: ../src/msec/msecgui.py:1086 msgid "Select new value for %s" msgstr "" #: ../src/msec/msecgui.py:1095 msgid "" "%s\n" "\n" "\tCurrent value:\t\t\t%s\n" "\t%sStandard level value:\t%s%s\n" "\t%sSecure level value:\t\t%s%s\n" msgstr "" #: ../src/msec/msecgui.py:1106 msgid "New value:" msgstr "" #: ../src/msec/msecgui.py:1168 msgid "Save your changes?" msgstr "" #: ../src/msec/msecgui.py:1170 #, fuzzy msgid "_Cancel" msgstr "Scancele" #: ../src/msec/msecgui.py:1171 msgid "_Ignore" msgstr "" #: ../src/msec/msecgui.py:1172 #, fuzzy msgid "_Save" msgstr "Salve" #: ../src/msec/msecgui.py:1174 #, fuzzy msgid "Do you want to save changes before closing?" msgstr "Vuelistu salvâ les modifichis a /etc/fstab" #: ../src/msec/plugins/pam.py:67 msgid "Using password to authenticate users" msgstr "" #: ../src/msec/plugins/pam.py:71 msgid "Don't use password to authenticate users" msgstr "" #: ../src/msec/plugins/pam.py:82 msgid "Password history not supported with pam_tcb." msgstr "" #: ../src/msec/plugins/pam.py:90 msgid "Invalid maximum password history length: \"%s\"" msgstr "" #: ../src/msec/plugins/pam.py:105 msgid "Setting password history to %d." msgstr "" #: ../src/msec/plugins/pam.py:111 msgid "Disabling password history" msgstr "" #: ../src/msec/plugins/pam.py:123 msgid "" "Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter" msgstr "" #: ../src/msec/plugins/pam.py:144 msgid "Setting minimum password length %d" msgstr "" #: ../src/msec/plugins/pam.py:168 msgid "Allowing su only from wheel group members" msgstr "" #: ../src/msec/plugins/pam.py:172 msgid "no wheel group" msgstr "" #: ../src/msec/plugins/pam.py:176 msgid "wheel group is empty" msgstr "" #: ../src/msec/plugins/pam.py:184 msgid "Allowing su for all" msgstr "" #: ../src/msec/plugins/pam.py:203 msgid "Allowing transparent root access for wheel group members" msgstr "" #: ../src/msec/plugins/pam.py:210 msgid "Disabling transparent root access for wheel group members" msgstr ""