# translation of DrakX-af21-09.po to Afrikaans
# translation of DrakX-af.po to Afrikaans
# KTranslator Generated File
# KTranslator Generated File
# Copyright (C) 2000,2003, 2004 Free Software Foundation, Inc.
# Schalk W. Cronjé <schalkc@ntaba.co.za>, 2000.
# Dirk van der Walt <mandrake@webmail.co.za>, 2003.
# Dirk van der Walt <dirkvanderwalt@webmail.co.za>, 2004.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-af\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2013-08-04 18:39+EEST\n"
"PO-Revision-Date: 2005-04-21 17:33+0200\n"
"Last-Translator: Dirk van der Walt <dirkvanderwalt@webmail.co.za>\n"
"Language-Team: Afrikaans\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.2\n"

#: ../src/msec/config.py:46
msgid "Modified system files"
msgstr ""

#: ../src/msec/config.py:47
#, fuzzy
msgid "No changes in system files"
msgstr "Raporteer eienaarlose-lêers"

#: ../src/msec/config.py:60 ../src/msec/tools.py:36
msgid "Disabled"
msgstr ""

#: ../src/msec/config.py:211 ../src/msec/config.py:423
msgid "Unable to load configuration file %s: %s"
msgstr ""

#: ../src/msec/config.py:225 ../src/msec/config.py:334
#: ../src/msec/config.py:442
#, fuzzy
msgid "Bad config option: %s"
msgstr "Klankkonfigurasie"

#: ../src/msec/config.py:260 ../src/msec/config.py:373
#: ../src/msec/config.py:468
msgid "Unable to save %s: %s"
msgstr ""

#: ../src/msec/config.py:319
msgid "loading exceptions file %s: %s"
msgstr ""

#: ../src/msec/config.py:320
#, fuzzy
msgid "No exceptions loaded"
msgstr "Opsies"

#: ../src/msec/help.py:14
#, fuzzy
msgid ""
"Allow local users to connect to X server. Accepted arguments: yes (all "
"connections are allowed), local (only local connection), no (no connection)."
msgstr ""
"Laat toe/Verbied X-konneksies:\n"
"\n"
"- ALMAL ( alle konneksies word toegelaat),\n"
"\n"
"- PLAASLIK (slegs vanaf die plaaslike rekenaar),\n"
"\n"
"- GEEN (geen konneksie)."

#: ../src/msec/help.py:16
#, fuzzy
msgid "Enable checking for files/directories writable by everybody."
msgstr "Soek vir lêers/lêergidse waarna enige iemand kan skryf."

#: ../src/msec/help.py:18
#, fuzzy
msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
msgstr "Kyk vir leë wagwoorde in '/etc/shadow'"

#: ../src/msec/help.py:20
msgid "Log syslog messages on console terminal 12."
msgstr ""

#: ../src/msec/help.py:22
msgid "Send mail reports even if no changes were detected."
msgstr ""

#: ../src/msec/help.py:24
msgid ""
"Defines the base security level, on top of which the current configuration "
"is based."
msgstr ""

#: ../src/msec/help.py:26
#, fuzzy
msgid "Accept broadcasted ICMP echo."
msgstr "Aanvaar uitgesaaide icmp-ego's"

#: ../src/msec/help.py:28
msgid ""
"Enable verification for changes in the installed RPM packages. This will "
"notify you when new packages are installed or removed."
msgstr ""

#: ../src/msec/help.py:30
msgid "Enable periodic permission checking for files specified in msec policy."
msgstr ""

#: ../src/msec/help.py:32
msgid "Ignore changes in process IDs when checking for open network ports."
msgstr ""

#: ../src/msec/help.py:34
msgid "Allow X server to accept connections from network on tcp port 6000."
msgstr ""

#: ../src/msec/help.py:36
msgid "Enable checking for known rootkits using chkrootkit."
msgstr ""

#: ../src/msec/help.py:38
msgid ""
"Enable msec to enforce file permissions to the values specified in the msec "
"security policy."
msgstr ""

#: ../src/msec/help.py:40
msgid ""
"Enable sectools checks. This check will run all sectool checks for a "
"security level configuration. The security level to be used during this test "
"is determined by the CHECK_SECTOOL_LEVELS variable."
msgstr ""

#: ../src/msec/help.py:42
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr "Stel instruksiedop se geskiedenisgrootte. '-1' beteken oneindig groot."

#: ../src/msec/help.py:44
#, fuzzy
msgid "Allow system reboot and shutdown to local users."
msgstr "Laat toe/Verbied herbegin deur 'n konsole-gebruiker."

#: ../src/msec/help.py:46
#, fuzzy
msgid "Enable checking for changes in firewall settings."
msgstr "Raporteer eienaarlose-lêers"

#: ../src/msec/help.py:48
#, fuzzy
msgid "Enable checking for additions/removals of suid root files."
msgstr "Ondersoek die byvoeg/verwydering van suid 'root'-lêers"

#: ../src/msec/help.py:50
msgid "Include current directory into user PATH by default"
msgstr ""

#: ../src/msec/help.py:52
#, fuzzy
msgid ""
"Enable crontab and at for users. Put allowed users in /etc/cron.allow and /"
"etc/at.allow (see man at(1) and crontab(1))."
msgstr ""
"Versper/Ontsper 'crantab' en 'at' vir gebruikers.\n"
"\n"
"Plaas toegelete gebruikers in /etc/cron.allow en /etc/at.allow\n"
"(verwys na man at(1) en crontab(1))."

#: ../src/msec/help.py:54
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr "Voorsien die tydsbeperking van die dop. Indien geen, maak dit Zero"

#: ../src/msec/help.py:56
msgid ""
"Enable password-related checks, such as empty passwords and strange super-"
"user accounts."
msgstr ""

#: ../src/msec/help.py:58
#, fuzzy
msgid ""
"Set the password history length to prevent password reuse. This is not "
"supported by pam_tcb."
msgstr "Stel die wagwoord-geskiedenis se lente om hergebruik te voorkom"

#: ../src/msec/help.py:60
#, fuzzy
msgid "Set the user umask."
msgstr "Stel die 'umask'"

#: ../src/msec/help.py:62
msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
msgstr ""

#: ../src/msec/help.py:64
msgid "User email to receive security notifications."
msgstr ""

#: ../src/msec/help.py:66
#, fuzzy
msgid "Allow autologin."
msgstr "Laat toe/Verbied outo-inteken."

#: ../src/msec/help.py:68
msgid "Allow only users in wheel group to su to root."
msgstr ""

#: ../src/msec/help.py:70
#, fuzzy
msgid "Enable daily security checks."
msgstr "Loop die daaglikse sekuriteits-toetse"

#: ../src/msec/help.py:72
msgid ""
"Use secure location for temporary files. If this parameter is set to 'yes', "
"user home directory will be used for temporary files. Otherwise, /tmp will "
"be used."
msgstr ""

#: ../src/msec/help.py:74
#, fuzzy
msgid "Allow direct root login on terminal."
msgstr "Laat toe/Weier vir 'root' om direk in te teken."

#: ../src/msec/help.py:76
#, fuzzy
msgid "Enable checking for changes in system users."
msgstr "Raporteer eienaarlose-lêers"

#: ../src/msec/help.py:78
#, fuzzy
msgid "Enable checking for unowned files."
msgstr "Raporteer eienaarlose-lêers"

#: ../src/msec/help.py:80
#, fuzzy
msgid "Enable IP spoofing protection."
msgstr "Ontsper flous-naamresolusie-beskerming"

#: ../src/msec/help.py:82
msgid "Allow display managers (kdm and gdm) to display list of local users."
msgstr ""

#: ../src/msec/help.py:84
#, fuzzy
msgid "Enable name resolution spoofing protection."
msgstr "Flous-naamresolusie-beskerming"

#: ../src/msec/help.py:86
msgid ""
"Enforce MSEC file directory permissions on system startup. If this parameter "
"is set to 'enforce', system permissions will be enforced automatically, "
"according to system security settings."
msgstr ""

#: ../src/msec/help.py:88
msgid "Enables logging of periodic checks to system log."
msgstr ""

#: ../src/msec/help.py:90
msgid ""
"Enable permission checking on users' files that should not be owned by "
"someone else, or writable."
msgstr ""

#: ../src/msec/help.py:92
msgid ""
"Creates the symlink /etc/security/msec/server to point to /etc/security/msec/"
"server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --"
"add to decide to add a service if it is present in the file during the "
"installation of packages. By default, two presets are provided: local (which "
"only enables local services) and remote (which also enables some remote "
"services considered safe). Note that the allowed services must be placed "
"manually into the server.SERVER_LEVEL files when necessary."
msgstr ""

#: ../src/msec/help.py:94
msgid ""
"Use password to authenticate users. Take EXTREME care when disabling "
"passwords, as it will leave the machine vulnerable."
msgstr ""

#: ../src/msec/help.py:96
#, fuzzy
msgid "Enable checking for changes in system groups."
msgstr "Raporteer eienaarlose-lêers"

#: ../src/msec/help.py:98
msgid ""
"Set umask option for mounting vfat and ntfs partitions. If umask is '-1', "
"default system umask is used."
msgstr ""

#: ../src/msec/help.py:100
msgid "Show security notifications in system tray using libnotify."
msgstr ""

#: ../src/msec/help.py:102
msgid "Enable checking for open network ports."
msgstr ""

#: ../src/msec/help.py:104
msgid "Run security checks when machine is running on battery power."
msgstr ""

#: ../src/msec/help.py:106
msgid "Perform hourly security check for changes in system configuration."
msgstr ""

#: ../src/msec/help.py:108
msgid ""
"Allow remote root login via sshd. If yes, login is allowed. If without-"
"password, only public-key authentication logins are allowed. See "
"sshd_config(5) man page for more information."
msgstr ""

#: ../src/msec/help.py:110
#, fuzzy
msgid "Enable logging of strange network packets."
msgstr "Ontsper aanteken van vreemde IPv4-pakkies in staaflêer."

#: ../src/msec/help.py:112
msgid ""
"Define the default retention period for logs, in weeks. Some countries "
"require that the log files should be kept for 12 months, other do not have "
"such strict requirements. This variable defines the number of past log files "
"that should be kept by logrotate on the system."
msgstr ""

#: ../src/msec/help.py:114
msgid "Ask for root password when going to single user level (man sulogin(8))."
msgstr ""

#: ../src/msec/help.py:116
msgid "Allow root access without password for the members of the wheel group."
msgstr ""

#: ../src/msec/help.py:118
msgid "Fix owner and group of unowned files to use nobody/nogroup."
msgstr ""

#: ../src/msec/help.py:120
#, fuzzy
msgid "Send security check results by email."
msgstr "Stuur toets-reslutate via e-pos"

#: ../src/msec/help.py:122
msgid ""
"Allow to export display when passing from the root account to the other "
"users. See pam_xauth(8) for more details."
msgstr ""

#: ../src/msec/help.py:124
msgid ""
"Allow users in wheel group to use sudo. If this option is set to 'yes', the "
"users in wheel group are allowed to use sudo and run commands as root by "
"using their passwords. If this option to set to 'without-password', the "
"users can use sudo without being asked for their password. WARNING: using "
"sudo without any password makes your system very vulnerable, and you should "
"only use this setting if you know what you are doing!"
msgstr ""

#: ../src/msec/help.py:126
msgid "Enable checksum verification for suid files."
msgstr ""

#: ../src/msec/help.py:128
#, fuzzy
msgid "Accept ICMP echo."
msgstr "Aanvaar icmp-ego's"

#: ../src/msec/help.py:130
#, fuzzy
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters, using length,ndigits,nupper format."
msgstr ""
"Stel die wagwoord se minimum lengte, minimum aantal syfers en die minimum "
"hoofletters."

#: ../src/msec/help.py:132
#, fuzzy
msgid ""
"Allow full access to network services controlled by tcp_wrapper (see hosts."
"deny(5)). If yes, all services are allowed. If local, only connections to "
"local services are authorized. If no, the services must be authorized "
"manually in /etc/hosts.allow (see hosts.allow(5))."
msgstr ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts."
"allow(5))."

#: ../src/msec/help.py:134
msgid ""
"Enable verification of integrity of installed RPM packages. This will notify "
"you if checksums of the installed files were changed, showing separate "
"results for binary and configuration files."
msgstr ""

#: ../src/msec/help.py:136
msgid ""
"Patterns to exclude from disk checks. This parameter is parsed as a regex "
"(7), so you may use complex expressions."
msgstr ""

#: ../src/msec/help.py:138
msgid ""
"Defines the sectool level to use during the periodic security check. You may "
"use the sectool-gui application to select individual tests for each level. "
"If this variable is not defined, the default level defined in sectool "
"configuration will be used."
msgstr ""

#: ../src/msec/help.py:140
#, fuzzy
msgid "Set the root umask."
msgstr "Kies 'root' se 'umask'."

#: ../src/msec/help.py:142
msgid "Enforce MSEC settings on system startup"
msgstr ""

#: ../src/msec/help.py:144
msgid "Enable periodic security check results to terminal."
msgstr ""

#: ../src/msec/help.py:146
#, fuzzy
msgid "Accept bogus IPv4 error messages."
msgstr "Aanvaar snert IPv4 foutboodskappe"

#: ../src/msec/help.py:148
#, fuzzy
msgid "Enable checking for additions/removals of sgid files."
msgstr "Ondersoek die byvoeg/verwydering van sgid-lêers"

#: ../src/msec/help.py:150
#, fuzzy
msgid "Activate ethernet cards promiscuity check."
msgstr "Aktiveer/Versper ethernetkaarte 'promoscuity' toets."

#: ../src/msec/libmsec.py:265
msgid "%s modified so launched command: %s"
msgstr ""

#: ../src/msec/libmsec.py:274
msgid "%s modified so should have run command: %s"
msgstr ""

#: ../src/msec/libmsec.py:376 ../src/msec/libmsec.py:408
#, fuzzy
msgid "deleted %s"
msgstr "Uitwis"

#: ../src/msec/libmsec.py:394
#, fuzzy
msgid "touched file %s"
msgstr "Nee soos lêer"

#: ../src/msec/libmsec.py:414
#, fuzzy
msgid "made symbolic link from %s to %s"
msgstr "Oorskakeling van ext2 na ext3"

#: ../src/msec/libmsec.py:417
msgid "moved file %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:467 ../src/msec/libmsec.py:483
msgid "set variable %s to %s in %s"
msgstr ""

#: ../src/msec/libmsec.py:685
msgid "Error loading plugin '%s' from %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:702
msgid "Invalid callback: %s"
msgstr ""

#: ../src/msec/libmsec.py:711
msgid "Plugin %s not found"
msgstr ""

#: ../src/msec/libmsec.py:718
msgid "Not supported function '%s' in '%s'"
msgstr ""

#: ../src/msec/libmsec.py:725 ../src/msec/libmsec.py:855
msgid "In check-only mode, nothing is written back to disk."
msgstr ""

#: ../src/msec/libmsec.py:752
msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
msgstr ""

#: ../src/msec/libmsec.py:785
#, fuzzy
msgid "user name %s not found"
msgstr "Hierdie naam is te lank"

#: ../src/msec/libmsec.py:797
msgid "user name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:809
msgid "group name %s not found"
msgstr ""

#: ../src/msec/libmsec.py:821
msgid "group name not found for id %d"
msgstr ""

#: ../src/msec/libmsec.py:831
msgid "Unable to check /proc/mounts. Assuming all file systems are local."
msgstr ""

#: ../src/msec/libmsec.py:870
#, fuzzy
msgid "Forcing ownership of %s to %s"
msgstr "Oorskakeling van ext2 na ext3"

#: ../src/msec/libmsec.py:874
#, fuzzy
msgid "Error changing user on %s: %s"
msgstr "fout met onthegting van %s: %s"

#: ../src/msec/libmsec.py:876
msgid "Wrong owner of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:879
#, fuzzy
msgid "Enforcing group on %s to %s"
msgstr "Oorskakeling van ext2 na ext3"

#: ../src/msec/libmsec.py:883
#, fuzzy
msgid "Error changing group on %s: %s"
msgstr "fout met onthegting van %s: %s"

#: ../src/msec/libmsec.py:885
msgid "Wrong group of %s: should be %s"
msgstr ""

#: ../src/msec/libmsec.py:890
msgid "Enforcing permissions on %s to %o"
msgstr ""

#: ../src/msec/libmsec.py:894
msgid "Error changing permissions on %s: %s"
msgstr ""

#: ../src/msec/libmsec.py:896
msgid "Wrong permissions of %s: should be %o"
msgstr ""

#: ../src/msec/libmsec.py:900
#, fuzzy
msgid "Enforcing acl on %s"
msgstr "Oorskakeling van ext2 na ext3"

#: ../src/msec/libmsec.py:914
msgid "Unable to add filesystem-specific ACL %s to %s"
msgstr ""

#: ../src/msec/libmsec.py:916
#, fuzzy
msgid "Error changing acl on %s: %s"
msgstr "fout met onthegting van %s: %s"

#: ../src/msec/libmsec.py:918
msgid "Wrong acl of %s"
msgstr ""

#: ../src/msec/libmsec.py:935
msgid "bad permissions for '%s': '%s'"
msgstr ""

#: ../src/msec/libmsec.py:960
msgid "Non local file: \"%s\". Nothing changed."
msgstr ""

#: ../src/msec/libmsec.py:1005
#, fuzzy
msgid "Checking paths: %s"
msgstr "Toets %s"

#: ../src/msec/msec.py:87 ../src/msec/msecperms.py:96
#, fuzzy
msgid "Invalid security level '%s'."
msgstr "Sekuriteitsvlak"

#: ../src/msec/msec.py:114 ../src/msec/msecperms.py:121
msgid "Msec: Mageia Security Center (%s)\n"
msgstr ""

#: ../src/msec/msec.py:115 ../src/msec/msecperms.py:122
msgid "Error: This application must be executed by root!"
msgstr ""

#: ../src/msec/msec.py:116 ../src/msec/msecperms.py:123
msgid "Run with --help to get help."
msgstr ""

#: ../src/msec/msec.py:142
msgid "Level '%s' not found, aborting."
msgstr ""

#: ../src/msec/msec.py:144
#, fuzzy
msgid "Switching to '%s' level."
msgstr "Oorskakeling van ext2 na ext3"

#: ../src/msec/msec.py:151
msgid "No custom file permissions for level '%s'."
msgstr ""

#: ../src/msec/msec.py:152
#, fuzzy
msgid "Saving file permissions to '%s' level."
msgstr "Oorskakeling van ext2 na ext3"

#: ../src/msec/msec.py:192 ../src/msec/msecperms.py:166
msgid "Unable to save config!"
msgstr ""

#: ../src/msec/msec.py:194
msgid "Unable to save file system permissions!"
msgstr ""

#: ../src/msec/msecgui.py:55
msgid ""
"<big><b>Choose security level</b></big>\n"
"This application allows you to configure your system security. If you wish\n"
"to activate it, choose the appropriate security level: "
msgstr ""

#: ../src/msec/msecgui.py:61
msgid ""
"This profile configures a reasonably safe set of security features. It is "
"the suggested level for Desktop. If unsure which profile to use, use this "
"one."
msgstr ""

#: ../src/msec/msecgui.py:62
msgid ""
"This profile is focused on netbooks, laptops or low-end devices, which are "
"only accessed by local users and run on batteries."
msgstr ""

#: ../src/msec/msecgui.py:64
msgid ""
"This profile is configured to provide maximum security, even at the cost of "
"limiting the remote access to the system. This level is suggested for "
"security-concerned systems and servers. "
msgstr ""

#: ../src/msec/msecgui.py:66
msgid ""
"This profile is targeted on local network servers, which do not receive "
"accesses from unauthorized Internet users."
msgstr ""

#: ../src/msec/msecgui.py:68
msgid ""
"This profile is provided for servers which are intended to be accessed by "
"unauthorized Internet users."
msgstr ""

#: ../src/msec/msecgui.py:69
msgid ""
"This profile is intended for the users who do not rely on msec to change "
"system settings, and use it for periodic checks only. It configures all "
"periodic checks to run once a day."
msgstr ""

#: ../src/msec/msecgui.py:70
msgid ""
"This profile is similar to the 'audit_daily' profile, but it runs all checks "
"weekly."
msgstr ""

#: ../src/msec/msecgui.py:77
#, fuzzy
msgid "Custom security level."
msgstr "Sekuriteit"

#: ../src/msec/msecgui.py:80
msgid ""
"<big><b>System security options</b></big>\n"
"These options control the local security configuration, such as the login "
"restrictions,\n"
"password configurations, integration with other security tools, and default "
"file creation\n"
"permissions.  "
msgstr ""

#: ../src/msec/msecgui.py:85
msgid ""
"<big><b>Network security options</b></big>\n"
"These options define the network security against remote threats, "
"unauthorized accesses,\n"
"and breakin attempts.  "
msgstr ""

#: ../src/msec/msecgui.py:89
msgid ""
"<big><b>Periodic security checks</b></big>\n"
"These options configure the security checks that should be executed "
"periodically.  "
msgstr ""

#: ../src/msec/msecgui.py:92
msgid ""
"<big><b>Exceptions</b></big>\n"
"Here you can configure the allowed exceptions for msec periodic security\n"
"checks. For each supported test, you may add as many exceptions as you want\n"
"for each check. Note that each exception is parsed as a regexp."
msgstr ""

#: ../src/msec/msecgui.py:97
msgid ""
"<big><b>File permissions</b></big>\n"
"These options allow to fine-tune system permissions for important files and "
"directories.\n"
"The following permissions are checked periodically, and any change to the "
"owner, group,\n"
"or current permission is reported. The permissions can be enforced, "
"automatically\n"
"changing them to the specified values when a change is detected.  "
msgstr ""

#: ../src/msec/msecgui.py:103
#, fuzzy
msgid "Save and apply new configuration?"
msgstr "Wag asb... Konfigurasie word toegpas"

#: ../src/msec/msecgui.py:154
msgid "Unable to load configuration for level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:160
msgid "Unable to load permissions for level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:193
#, fuzzy
msgid "_File"
msgstr "Chili"

#: ../src/msec/msecgui.py:195
#, fuzzy
msgid "_Save configuration"
msgstr "Klankkonfigurasie"

#: ../src/msec/msecgui.py:200
#, fuzzy
msgid "_Quit"
msgstr "Verlaat"

#: ../src/msec/msecgui.py:202 ../src/msec/msecgui.py:204
#, fuzzy
msgid "_Help"
msgstr "Hulp"

#: ../src/msec/msecgui.py:205
msgid "_About"
msgstr ""

#: ../src/msec/msecgui.py:232
msgid "MSEC: System Security and Audit"
msgstr ""

#: ../src/msec/msecgui.py:245
msgid "Overview"
msgstr ""

#: ../src/msec/msecgui.py:246
#, fuzzy
msgid "Security settings"
msgstr "Spesifieer opsies"

#: ../src/msec/msecgui.py:255
#, fuzzy
msgid "Basic security"
msgstr "Daaglikse sekuriteits-toets"

#: ../src/msec/msecgui.py:256
#, fuzzy
msgid "System security"
msgstr "Sekuriteit"

#: ../src/msec/msecgui.py:257
#, fuzzy
msgid "Network security"
msgstr "Netwerkkoppelvlak"

#: ../src/msec/msecgui.py:258 ../src/msec/msecgui.py:649
msgid "Periodic checks"
msgstr ""

#: ../src/msec/msecgui.py:259
#, fuzzy
msgid "Exceptions"
msgstr "Opsies"

#: ../src/msec/msecgui.py:260 ../src/msec/msecgui.py:1250
msgid "Permissions"
msgstr "Vergunnigs"

#: ../src/msec/msecgui.py:300
msgid "MSEC option changes"
msgstr ""

#: ../src/msec/msecgui.py:300
#, fuzzy
msgid "option"
msgstr "Opsies"

#: ../src/msec/msecgui.py:301
msgid "System permissions changes"
msgstr ""

#: ../src/msec/msecgui.py:301
msgid "permission check"
msgstr ""

#: ../src/msec/msecgui.py:311
msgid "changed %s <b>%s</b> (%s -> %s)"
msgstr ""

#: ../src/msec/msecgui.py:316
msgid "added %s <b>%s</b> (%s)"
msgstr ""

#: ../src/msec/msecgui.py:321
msgid "removed %s <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:325
#, fuzzy
msgid "no changes"
msgstr "Geen deling"

#: ../src/msec/msecgui.py:338 ../src/msec/msecgui.py:345
#, fuzzy
msgid "Saving changes.."
msgstr "Verwyder pakkette..."

#: ../src/msec/msecgui.py:341
msgid "Ignore and quit"
msgstr ""

#: ../src/msec/msecgui.py:379
msgid "<b>%s:</b> <i>%s</i>\n"
msgstr ""

#: ../src/msec/msecgui.py:386
msgid "<b>MSEC test run results:</b> <i>%s</i>"
msgstr ""

#: ../src/msec/msecgui.py:394
msgid "Details"
msgstr "Detail"

#: ../src/msec/msecgui.py:400
msgid "MSEC messages (%s): %d"
msgstr ""

#: ../src/msec/msecgui.py:414
msgid "Details (%d changes).."
msgstr ""

#: ../src/msec/msecgui.py:467
msgid "No base msec level specified, using '%s'"
msgstr ""

#: ../src/msec/msecgui.py:470
msgid "Detected base msec level '%s'"
msgstr ""

#: ../src/msec/msecgui.py:498
#, fuzzy
msgid "Security Option"
msgstr "Spesifieer opsies"

#: ../src/msec/msecgui.py:508 ../src/msec/msecgui.py:846
#, fuzzy
msgid "Description"
msgstr "Spesifieer opsies"

#: ../src/msec/msecgui.py:513
#, fuzzy
msgid "Value"
msgstr "Palau"

#: ../src/msec/msecgui.py:523
msgid "Invalid option '%s'!"
msgstr ""

#: ../src/msec/msecgui.py:593
msgid "Firewall"
msgstr ""

#: ../src/msec/msecgui.py:600 ../src/msec/msecgui.py:642
msgid "Configure"
msgstr ""

#: ../src/msec/msecgui.py:608
msgid "Updates"
msgstr ""

#: ../src/msec/msecgui.py:614
msgid "Update now"
msgstr ""

#: ../src/msec/msecgui.py:621
#, fuzzy
msgid "Security"
msgstr "Spesifieer opsies"

#: ../src/msec/msecgui.py:624
msgid "Msec is disabled"
msgstr ""

#: ../src/msec/msecgui.py:627
msgid "Msec is enabled"
msgstr ""

#: ../src/msec/msecgui.py:628
#, fuzzy
msgid "Base security level: '%s'"
msgstr "Sekuriteitsvlak"

#: ../src/msec/msecgui.py:636
msgid "Custom settings: %d"
msgstr ""

#: ../src/msec/msecgui.py:657
msgid "Never"
msgstr ""

#: ../src/msec/msecgui.py:658
msgid "Check: %s. Last run: %s"
msgstr ""

#: ../src/msec/msecgui.py:663
msgid "Show results"
msgstr ""

#: ../src/msec/msecgui.py:669
msgid "Run now"
msgstr ""

#: ../src/msec/msecgui.py:690
msgid "Unable to read log file: %s"
msgstr ""

#: ../src/msec/msecgui.py:691
msgid "Periodic check results"
msgstr ""

#: ../src/msec/msecgui.py:723
msgid ""
"Do you want to run the <b>%s</b> periodic check? Please note that it could "
"take a considerable time to finish."
msgstr ""

#: ../src/msec/msecgui.py:731 ../src/msec/msecgui.py:739
msgid "Please wait, running checks..."
msgstr ""

#: ../src/msec/msecgui.py:742
msgid "Please wait, this might take a few minutes."
msgstr ""

#: ../src/msec/msecgui.py:771
msgid "Periodic check was executed successfully!"
msgstr ""

#: ../src/msec/msecgui.py:774
msgid "An error occurred while running periodic check."
msgstr ""

#: ../src/msec/msecgui.py:806
#, fuzzy
msgid "Enable MSEC tool"
msgstr "Laat CD-herlaai toe?"

#: ../src/msec/msecgui.py:813
#, fuzzy
msgid "Select the base security level"
msgstr "Kies die verlangde sekuriteitsvlak"

#: ../src/msec/msecgui.py:836
msgid "Level name"
msgstr ""

#: ../src/msec/msecgui.py:892
#, fuzzy
msgid "Send security alerts by email to:"
msgstr "Sekuriteits-waarskuwings:"

#: ../src/msec/msecgui.py:914
msgid "Display security alerts on desktop"
msgstr ""

#: ../src/msec/msecgui.py:1098
#, fuzzy
msgid "Enable periodic security checks"
msgstr "Aktiveer msec se uurlikse ondersoek"

#: ../src/msec/msecgui.py:1160
#, fuzzy
msgid "Security check"
msgstr "Spesifieer opsies"

#: ../src/msec/msecgui.py:1166
#, fuzzy
msgid "Exception"
msgstr "Opsies"

#: ../src/msec/msecgui.py:1187 ../src/msec/msecgui.py:1314
#, fuzzy
msgid "Add a rule"
msgstr "Voeg gebruiker by"

#: ../src/msec/msecgui.py:1192 ../src/msec/msecgui.py:1319
msgid "Delete"
msgstr "Uitwis"

#: ../src/msec/msecgui.py:1232
msgid "Path"
msgstr "Roete"

#: ../src/msec/msecgui.py:1238
#, fuzzy
msgid "User"
msgstr "Gebruiker ID"

#: ../src/msec/msecgui.py:1244
#, fuzzy
msgid "Group"
msgstr "Groep ID"

#: ../src/msec/msecgui.py:1258
msgid "Enforce"
msgstr ""

#: ../src/msec/msecgui.py:1266
msgid "Acl"
msgstr ""

#: ../src/msec/msecgui.py:1419
msgid "Editing exception"
msgstr ""

#: ../src/msec/msecgui.py:1424
msgid "Adding new exception"
msgstr ""

#: ../src/msec/msecgui.py:1431
msgid ""
"Editing exception. Please select the correspondent msec check and exception "
"value\n"
msgstr ""

#: ../src/msec/msecgui.py:1438
msgid "Check: "
msgstr ""

#: ../src/msec/msecgui.py:1453
msgid "Exception: "
msgstr ""

#: ../src/msec/msecgui.py:1489
msgid "Changing permissions for %s"
msgstr ""

#: ../src/msec/msecgui.py:1497
msgid "Adding new permission check"
msgstr ""

#: ../src/msec/msecgui.py:1509
msgid "Changing permissions on <b>%s</b>"
msgstr ""

#: ../src/msec/msecgui.py:1509
msgid "new file"
msgstr ""

#: ../src/msec/msecgui.py:1521
msgid "File: "
msgstr ""

#: ../src/msec/msecgui.py:1530
msgid ""
"Please specify new file owner and permissions, or use 'current' to keep "
"current settings."
msgstr ""

#: ../src/msec/msecgui.py:1537
#, fuzzy
msgid "User: "
msgstr "Gebruiker ID"

#: ../src/msec/msecgui.py:1548
#, fuzzy
msgid "Group: "
msgstr "Groep ID"

#: ../src/msec/msecgui.py:1559
msgid "Permissions: "
msgstr ""

#: ../src/msec/msecgui.py:1568
msgid ""
"To enforce additional ACL (Access Control List) on file, specify them in the "
"following format:\n"
"user1:acl,user2:acl\n"
"Refer to 'man setfacl' for details."
msgstr ""

#: ../src/msec/msecgui.py:1575
msgid "ACL: "
msgstr ""

#: ../src/msec/msecgui.py:1642
msgid "Select new value for %s"
msgstr ""

#: ../src/msec/msecgui.py:1651
msgid ""
"<i>%s</i>\n"
"\n"
"\tCurrent value:\t\t\t<i>%s</i>\n"
"\t%sDefault level value:\t<i>%s</i>%s\n"
msgstr ""

#: ../src/msec/msecgui.py:1661
#, fuzzy
msgid "New value:"
msgstr "Nieu-Caledonië"

#: ../src/msec/plugins/log.py:45
#, fuzzy
msgid "Invalid retention period: \"%s\""
msgstr "Tydsbeperking vir dop"

#: ../src/msec/plugins/log.py:53
msgid "Setting log retention period to %d weeks"
msgstr ""

#: ../src/msec/plugins/msec.py:150
msgid "Allowing unrestricted chkconfig for packages"
msgstr ""

#: ../src/msec/plugins/msec.py:155
msgid "Restricting chkconfig for packages according to \"%s\" profile"
msgstr ""

#: ../src/msec/plugins/msec.py:165
#, fuzzy
msgid "Setting root umask to %s"
msgstr "Oorskakeling van ext2 na ext3"

#: ../src/msec/plugins/msec.py:175
#, fuzzy
msgid "Setting users umask to %s"
msgstr "Oorskakeling van ext2 na ext3"

#: ../src/msec/plugins/msec.py:196
msgid "Allowing users to connect X server from everywhere"
msgstr ""

#: ../src/msec/plugins/msec.py:199
msgid "Allowing users to connect X server from localhost"
msgstr ""

#: ../src/msec/plugins/msec.py:202
msgid "Restricting X server connection to the console user"
msgstr ""

#: ../src/msec/plugins/msec.py:205
msgid "invalid allow_x_connections arg: %s"
msgstr ""

#: ../src/msec/plugins/msec.py:228
#, fuzzy
msgid "Allowing the X server to listen to tcp connections"
msgstr "Laat X Window konneksies toe"

#: ../src/msec/plugins/msec.py:239
msgid "Forbidding the X server to listen to tcp connection"
msgstr ""

#: ../src/msec/plugins/msec.py:255
#, fuzzy
msgid "Invalid shell timeout \"%s\""
msgstr "Tydsbeperking vir dop"

#: ../src/msec/plugins/msec.py:263
#, fuzzy
msgid "Setting shell timeout to %s"
msgstr "Tydsbeperking vir dop"

#: ../src/msec/plugins/msec.py:271
#, fuzzy
msgid "Invalid shell history size \"%s\""
msgstr "Instruksiedop se geskiendenis-gootte"

#: ../src/msec/plugins/msec.py:282
#, fuzzy
msgid "Setting shell history size to %s"
msgstr "Instruksiedop se geskiendenis-gootte"

#: ../src/msec/plugins/msec.py:286
#, fuzzy
msgid "Removing limit on shell history size"
msgstr "Instruksiedop se geskiendenis-gootte"

#: ../src/msec/plugins/msec.py:295
#, fuzzy
msgid "Invalid file system umask \"%s\""
msgstr "Tydsbeperking vir dop"

#: ../src/msec/plugins/msec.py:331
#, fuzzy
msgid "Allowing reboot and shutdown to the console user"
msgstr "Laat toe/Verbied herbegin deur 'n konsole-gebruiker."

#: ../src/msec/plugins/msec.py:338
#, fuzzy
msgid "Allowing SysRq key to the console user"
msgstr "Laat toe/Verbied herbegin deur 'n konsole-gebruiker."

#: ../src/msec/plugins/msec.py:341
msgid "Allowing Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:350
msgid "Allowing Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:353
msgid "Allowing Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/plugins/msec.py:357
#, fuzzy
msgid "Forbidding reboot and shutdown to the console user"
msgstr "Laat toe/Verbied herbegin deur 'n konsole-gebruiker."

#: ../src/msec/plugins/msec.py:365
#, fuzzy
msgid "Forbidding SysRq key to the console user"
msgstr "Herbegin deur die konsole se gebruiker"

#: ../src/msec/plugins/msec.py:368
msgid "Forbidding Shutdown/Reboot in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:377
msgid "Forbidding Shutdown/Reboot in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:380
msgid "Forbidding Ctrl-Alt-Del from console"
msgstr ""

#: ../src/msec/plugins/msec.py:395
msgid "Allowing list of users in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:402
msgid "Allowing list of users in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:407
msgid "Forbidding list of users in KDM"
msgstr ""

#: ../src/msec/plugins/msec.py:414
msgid "Forbidding list of users in GDM"
msgstr ""

#: ../src/msec/plugins/msec.py:425
#, fuzzy
msgid "Allowing autologin"
msgstr "Laat toe/Verbied outo-inteken."

#: ../src/msec/plugins/msec.py:428
#, fuzzy
msgid "Forbidding autologin"
msgstr "Laat toe/Verbied outo-inteken."

#: ../src/msec/plugins/msec.py:433
msgid "Activating password in boot loader"
msgstr ""

#: ../src/msec/plugins/msec.py:447
#, fuzzy
msgid "Removing password in boot loader"
msgstr "Geen wagwoordveroudering vir"

#: ../src/msec/plugins/msec.py:462
#, fuzzy
msgid "Enabling log on console"
msgstr "Ontsper/Versper 'syslog' verslae na konsole 12"

#: ../src/msec/plugins/msec.py:466
msgid "Disabling log on console"
msgstr ""

#: ../src/msec/plugins/msec.py:483
msgid "Authorizing all services"
msgstr ""

#: ../src/msec/plugins/msec.py:487
msgid "Disabling all services"
msgstr ""

#: ../src/msec/plugins/msec.py:491
msgid "Disabling non local services"
msgstr ""

#: ../src/msec/plugins/msec.py:503
#, fuzzy
msgid "Enabling sulogin in single user runlevel"
msgstr "Versper/Ontsper sulogin(8) in enkel-gebruiker modus"

#: ../src/msec/plugins/msec.py:507
#, fuzzy
msgid "Disabling sulogin in single user runlevel"
msgstr "Versper/Ontsper sulogin(8) in enkel-gebruiker modus"

#: ../src/msec/plugins/msec.py:518
#, fuzzy
msgid "Enabling msec periodic runs"
msgstr "Aktiveer 'swap'-partisie %s"

#: ../src/msec/plugins/msec.py:522
msgid "Disabling msec periodic runs"
msgstr ""

#: ../src/msec/plugins/msec.py:535
#, fuzzy
msgid "Enabling crontab and at"
msgstr "Aktiveer \"crontab en \"at\" vir gebruikers"

#: ../src/msec/plugins/msec.py:542
#, fuzzy
msgid "Disabling crontab and at"
msgstr "Aktiveer \"crontab en \"at\" vir gebruikers"

#: ../src/msec/plugins/msec.py:554
msgid "Allowing export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:558
msgid "Forbidding export display from root"
msgstr ""

#: ../src/msec/plugins/msec.py:585
#, fuzzy
msgid "Allowing direct root login"
msgstr "Laat toe/Weier vir 'root' om direk in te teken."

#: ../src/msec/plugins/msec.py:608
#, fuzzy
msgid "Forbidding direct root login"
msgstr "Laat toe/Weier vir 'root' om direk in te teken."

#: ../src/msec/plugins/msec.py:630
msgid "Using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:632
msgid "Not using secure location for temporary files"
msgstr ""

#: ../src/msec/plugins/msec.py:652
msgid "Allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/msec.py:655
msgid "Not allowing including current directory in path"
msgstr ""

#: ../src/msec/plugins/network.py:134
#, fuzzy
msgid "Allowing remote root login"
msgstr "Laat eksterne 'root'-inteken toe"

#: ../src/msec/plugins/network.py:138
#, fuzzy
msgid "Forbidding remote root login"
msgstr "Laat toe/Verbied 'root' deur die netwerk in te teken."

#: ../src/msec/plugins/network.py:142
#, fuzzy
msgid "Allowing remote root login only by passphrase"
msgstr "Laat eksterne 'root'-inteken toe"

#: ../src/msec/plugins/network.py:175
#, fuzzy
msgid "Enabling name resolution spoofing protection"
msgstr "Flous-naamresolusie-beskerming"

#: ../src/msec/plugins/network.py:180
#, fuzzy
msgid "Disabling name resolution spoofing protection"
msgstr "Flous-naamresolusie-beskerming"

#: ../src/msec/plugins/pam.py:68
#, fuzzy
msgid "Using password to authenticate users"
msgstr "Geldigverklaring deur wagwoorde"

#: ../src/msec/plugins/pam.py:72
#, fuzzy
msgid "Don't use password to authenticate users"
msgstr "Geldigverklaring deur wagwoorde"

#: ../src/msec/plugins/pam.py:83
msgid "Password history not supported with pam_tcb."
msgstr ""

#: ../src/msec/plugins/pam.py:91
#, fuzzy
msgid "Invalid maximum password history length: \"%s\""
msgstr "Lengte van wagwoord-geskiedenis"

#: ../src/msec/plugins/pam.py:106
#, fuzzy
msgid "Setting password history to %d."
msgstr "Lengte van wagwoord-geskiedenis"

#: ../src/msec/plugins/pam.py:112
#, fuzzy
msgid "Disabling password history"
msgstr "Lengte van wagwoord-geskiedenis"

#: ../src/msec/plugins/pam.py:124
msgid ""
"Invalid password length \"%s\". Use \"length,ndigits,nupper\" as parameter"
msgstr ""

#: ../src/msec/plugins/pam.py:145
msgid "Setting minimum password length %d"
msgstr ""

#: ../src/msec/plugins/pam.py:169
#, fuzzy
msgid "Allowing su only from wheel group members"
msgstr ""
"Aktiveer 'su' slegs vir die 'wheel'-groep se lede OF vir enige gebruiker"

#: ../src/msec/plugins/pam.py:173
msgid "no wheel group"
msgstr ""

#: ../src/msec/plugins/pam.py:177
msgid ""
"Security configuration is defined to allow only members of the wheel group "
"to su to root, but this group is empty. Please add the allowed users into "
"the wheel group."
msgstr ""

#: ../src/msec/plugins/pam.py:185
msgid "Allowing su for all"
msgstr ""

#: ../src/msec/plugins/pam.py:204
msgid "Allowing transparent root access for wheel group members"
msgstr ""

#: ../src/msec/plugins/pam.py:211
#, fuzzy
msgid "Disabling transparent root access for wheel group members"
msgstr ""
"Aktiveer 'su' slegs vir die 'wheel'-groep se lede OF vir enige gebruiker"

#: ../src/msec/plugins/sudo.py:49
#, fuzzy
msgid "Allowing users in wheel group to use sudo"
msgstr ""
"Aktiveer 'su' slegs vir die 'wheel'-groep se lede OF vir enige gebruiker"

#: ../src/msec/plugins/sudo.py:54
msgid "Allowing users in wheel group to use sudo without password"
msgstr ""

#: ../src/msec/plugins/sudo.py:57
#, fuzzy
msgid "Not allowing users in wheel group to use sudo"
msgstr ""
"Aktiveer 'su' slegs vir die 'wheel'-groep se lede OF vir enige gebruiker"

#: ../src/msec/tools.py:33
msgid "Unable to parse firewall configuration: %s"
msgstr ""

#: ../src/msec/tools.py:38
msgid "Enabled, with %d rules"
msgstr ""

#: ../src/msec/tools.py:48
msgid "Last updated: %s"
msgstr ""

#: ../src/msec/tools.py:50
msgid "Unable to access %s: %s"
msgstr ""

#: ../src/msec/tools.py:51
msgid "Unable to determine update status"
msgstr ""

# File: ../cron-sh/security.sh, line: 15
#, sh-format
msgid "Error: base level $BASE_LEVEL not found"
msgstr ""

#
# File: ../cron-sh/security.sh, line: 21
#, sh-format
msgid "/etc/security/msec/security.conf don't exist."
msgstr ""

#
# File: ../cron-sh/security.sh, line: 92
#, sh-format
msgid "MSEC: audit script $script failed"
msgstr ""

#
# File: ../cron-sh/security.sh, line: 127
#, sh-format
msgid ""
"MSEC has performed Security Check on ${REPORT_HOSTNAME} on ${REPORT_DATE}. "
"Detailed results are available in ${MAIL_LOG_TODAY}"
msgstr ""

#
# File: ../cron-sh/security.sh, line: 138
#, sh-format
msgid ""
"MSEC has performed Diff Check on ${REPORT_HOSTNAME} on ${REPORT_DATE}. "
"Changes in system security were detected and are available in "
"${SECURITY_LOG}."
msgstr ""

#~ msgid "Standard"
#~ msgstr "Standaard"

#, fuzzy
#~ msgid "Secure"
#~ msgstr "Sekuriteit"

#, fuzzy
#~ msgid "System administrator email address:"
#~ msgstr "Kies 'root' se wagwoord"

#, fuzzy
#~ msgid "_Cancel"
#~ msgstr "Kanselleer"

#, fuzzy
#~ msgid "Do you want to save changes before closing?"
#~ msgstr "Wil u die /etc/fstab veranderinge stoor?"

#, fuzzy
#~ msgid "Activating daily security check"
#~ msgstr "Aktiveer/Versper daaglikese sekuriteits-toets."

#, fuzzy
#~ msgid "Disabling daily security check"
#~ msgstr "Daaglikse sekuriteits-toets"

#, fuzzy
#~ msgid "Activating periodic promiscuity check"
#~ msgstr "Aktiveer/Versper ethernetkaarte 'promoscuity' toets."

#, fuzzy
#~ msgid "Disabling periodic promiscuity check"
#~ msgstr "Ethernetkaarte 'promoscuity' toets"

#, fuzzy
#~ msgid "_Import configuration"
#~ msgstr "Klankkonfigurasie"

#, fuzzy
#~ msgid "_Export configuration"
#~ msgstr "Klankkonfigurasie"

#, fuzzy
#~ msgid "Save and apply current policy"
#~ msgstr "Wag asb... Konfigurasie word toegpas"

#, fuzzy
#~ msgid "Quit"
#~ msgstr "Verlaat"