# Traditional Chinese translation for isodumper package.
# Copyright (C) 2013 THE isodumper'S COPYRIGHT HOLDER
# This file is distributed under the same license as the isodumper package.
#
# Translators:
# Automatically generated, 2013
# FIRST AUTHOR <EMAIL@ADDRESS>, 2008
# You-Cheng Hsieh <yochenhsieh@gmail.com>, 2013~2014
msgid ""
msgstr ""
"Project-Id-Version: isodumper\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2016-05-09 20:37+0200\n"
"PO-Revision-Date: 2014-10-31 06:00+0800\n"
"Last-Translator: You-Cheng Hsieh <yochenhsieh@gmail.com>\n"
"Language-Team: Chinese (Taiwan) (http://www.transifex.com/projects/p/mageia/"
"language/zh_TW/)\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: lib/isodumper.py:123
#, python-format
msgid "%r not known to UDisks2"
msgstr ""

#: lib/isodumper.py:190
msgid "Mb"
msgstr "Mb"

#: lib/isodumper.py:210
msgid "Target Device: "
msgstr "目標裝置： "

#: lib/isodumper.py:232
msgid "Backup to: "
msgstr "備份在："

#: lib/isodumper.py:236
msgid "Formatting confirmation"
msgstr ""

#: lib/isodumper.py:241
msgid "The device was formatted successfully."
msgstr "裝置已經成功格式化了。"

#: lib/isodumper.py:245
msgid "An error occurred while creating a partition."
msgstr "建立磁碟區時發生了一個錯誤。"

#: lib/isodumper.py:249
msgid "Authentication error."
msgstr "認證錯誤。"

#: lib/isodumper.py:253
msgid "An error occurred."
msgstr "發生一個錯誤。"

#: lib/isodumper.py:290
msgid "Backup confirmation"
msgstr ""

#: lib/isodumper.py:290
msgid "Do you want to overwrite the file?"
msgstr "您想要覆寫檔案嗎？"

#: lib/isodumper.py:298
#, python-format
msgid ""
"The destination directory is too small to receive the backup (%s Mb needed)"
msgstr ""

#: lib/isodumper.py:304 lib/isodumper.py:666
msgid "Backup to:"
msgstr "備份在："

#: lib/isodumper.py:324
msgid "The device is too small to contain the ISO file."
msgstr "這個裝置太小而放不下 ISO 檔案。"

#: lib/isodumper.py:328
msgid "Writing confirmation"
msgstr ""

#: lib/isodumper.py:331
msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?"
msgstr "這個裝置超過 32 GB。您確定要使用它嗎？"

#: lib/isodumper.py:331 lib/isodumper.py:508
msgid "Warning"
msgstr ""

#: lib/isodumper.py:356
msgid "Unmounting all partitions of "
msgstr "卸載以下裝置的所有分區 "

#: lib/isodumper.py:358
msgid "Trying to unmount "
msgstr "嘗試卸載分區 "

#: lib/isodumper.py:362
#, python-format
msgid "Partition %s is busy"
msgstr ""

#: lib/isodumper.py:366
msgid " was terminated by signal "
msgstr " 被信號終止 "

#: lib/isodumper.py:366 lib/isodumper.py:372
msgid "Error, umount "
msgstr "出錯，卸載分區 "

#: lib/isodumper.py:370
msgid " successfully unmounted"
msgstr " 成功卸載裝置"

#: lib/isodumper.py:372
msgid " returned "
msgstr " 已返回 "

#: lib/isodumper.py:376
msgid "Execution failed: "
msgstr "執行失敗： "

#: lib/isodumper.py:385
msgid "Could not read mtab !"
msgstr "無法讀取 mtab！"

#: lib/isodumper.py:395 lib/isodumper.py:422
msgid "Reading error."
msgstr "讀取錯誤。"

#: lib/isodumper.py:403
msgid "You don't have permission to write to the device"
msgstr "您沒有權限寫入這個裝置"

#: lib/isodumper.py:408 lib/isodumper.py:409
msgid " to "
msgstr " 至 "

#: lib/isodumper.py:408
msgid "Writing "
msgstr "正在寫入 "

#: lib/isodumper.py:409
msgid "Executing copy from "
msgstr "正在從這個來源複製"

#: lib/isodumper.py:429 lib/isodumper.py:443 lib/isodumper.py:453
msgid "Writing error."
msgstr "寫入錯誤。"

#: lib/isodumper.py:436
msgid "Wrote: "
msgstr "已寫入： "

#: lib/isodumper.py:448
msgid " successfully written to "
msgstr " 成功寫入到 "

#: lib/isodumper.py:448 lib/isodumper.py:567
msgid "Image "
msgstr "映像 "

#: lib/isodumper.py:449
msgid "Bytes written: "
msgstr "寫入位元組："

#: lib/isodumper.py:461
msgid "Checking "
msgstr ""

#: lib/isodumper.py:486
msgid "SHA1 sum: "
msgstr ""

#: lib/isodumper.py:487
msgid "MD5  sum: "
msgstr ""

#: lib/isodumper.py:496
msgid "Success"
msgstr ""

#: lib/isodumper.py:496
msgid ""
"The operation completed successfully.\n"
" You are free to unplug it now, a logfile \n"
"(/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
" you close the application."
msgstr ""

#: lib/isodumper.py:508
msgid ""
"Writing is in progress. Exiting during writing \n"
"            will make the device or the backup unusable.\n"
"            Are you sure you want to quit during writing?"
msgstr ""

#: lib/isodumper.py:520
msgid "Error"
msgstr ""

#: lib/isodumper.py:571 lib/isodumper.py:625
msgid "IsoDumper"
msgstr "IsoDumper"

#: lib/isodumper.py:571
msgid ""
"Mageia IsoDumper<BR />----------------<BR />This GUI program is primarily "
"for safely writing a bootable ISO image to a USB flash drive, an operation "
"devious & potentially hazardous when done by hand. As a bonus, it can also "
"back up theentire previous<BR />contents of the flash drive onto the hard "
"disc, and restore the flash drive to its previous state subsequently.<BR /"
">It gives also a feature for formatting the USB device.<BR /><BR />IsoDumper "
"can be launched either from the menus, or a user or root console with the "
"command 'isodumper'.<BR />For normal users, the root password is solicited; "
"this is necessary for the program's operation. <BR />The flash drive can be "
"inserted beforehand or once the program is started. In the latter case, a "
"dialogue will say that there is no flash drive inserted, and allow a 'retry' "
"to find it once it is. <BR />(You may have to close any automatically opened "
"File Manager window).<BR /><BR />The fields of the main window are as "
"follows:<BR />- Device to work on: the device of the USB flash drive, a drop-"
"down list to choose from.<BR />- Write Image: to choose the source ISO image "
"*.iso (or flash drive backup file *.img) to write out.<BR />- Write to "
"device: This button launches the operation - with a prior warning dialogue. "
"<BR />The operation is shown in the progress bar beneath.<BR />- Backup to: "
"define the name and placement of the backup image file. The current flash "
"drive will be backed up to a disc file. Note that the entire flash drive is "
"preserved, regardless of its actual contents; ensure that you have the "
"necessary free disc space (the same size as the USB device). This backup "
"file can be used later to restore the flash drive by selecting it as the "
"source *.img file to write out.<BR />- Backup the device: launch the backup "
"operation.<BR />- Format the device:  create an unique partition on the "
"entire volume in the specified format in FAT, NTFS or ext. You can specify a "
"volume name and the format in a new dialog box.<BR />"
msgstr ""

#: lib/isodumper.py:617
msgid "Choose an image"
msgstr ""

#: lib/isodumper.py:618
msgid ""
"Warning\n"
"This will destroy all data on the target device,\n"
"        are you sure you want to proceed?\n"
"        If you say ok here, please <b>do not unplug</b>        the device "
"during the following operation."
msgstr ""

#: lib/isodumper.py:653
msgid "Device to work on:"
msgstr "工作的裝置:"

#: lib/isodumper.py:657
msgid "Write Image:"
msgstr "寫入映像："

#: lib/isodumper.py:663
msgid "&Write to device"
msgstr "寫入到裝置"

#: lib/isodumper.py:672
msgid "&Backup the device"
msgstr ""

#: lib/isodumper.py:676
msgid "Format the device in FAT, NTFS or ext:"
msgstr "格式化裝置成 FAT, NTFS 或 ext:"

#: lib/isodumper.py:678
msgid "&Format the device"
msgstr "格式化裝置"

#: lib/isodumper.py:682
msgid "Progression"
msgstr ""

#: lib/isodumper.py:686
msgid "Report"
msgstr ""

#: lib/isodumper.py:691 lib/isodumper.py:799
msgid "&Refresh"
msgstr ""

#: lib/isodumper.py:693
msgid "&About"
msgstr ""

#: lib/isodumper.py:695
msgid "&Help"
msgstr ""

#: lib/isodumper.py:697
msgid "&Quit"
msgstr ""

#: lib/isodumper.py:703
msgid "UDisks2 is not available on your system"
msgstr ""

#: lib/isodumper.py:722
msgid "Label for the device:"
msgstr "裝置的標籤:"

#: lib/isodumper.py:726
msgid "FAT 32 (Windows)"
msgstr "FAT 32 (Windows)"

#: lib/isodumper.py:728
msgid "NTFS (Windows)"
msgstr "NTFS (Windows)"

#: lib/isodumper.py:730
msgid "ext4 (Linux)"
msgstr "ext4 (Linux)"

#: lib/isodumper.py:732
msgid "Execute"
msgstr ""

#: lib/isodumper.py:733 lib/isodumper.py:800
msgid "Cancel"
msgstr ""

#: lib/isodumper.py:790
msgid "A tool for writing ISO images to  a device"
msgstr ""

#: lib/isodumper.py:798
msgid ""
"Warning\n"
"No target devices were found.\n"
"You need to plug in a USB Key to which the image can be written."
msgstr ""

#: polkit/org.mageia.isodumper.policy.in.h:1
msgid "Run Isodumper"
msgstr "執行 Isodumper"

#: polkit/org.mageia.isodumper.policy.in.h:2
msgid "Authentication is required to run Isodumper"
msgstr "執行 Isodumper 需要認證"

#: share/applications/isodumper.desktop.in.h:1
msgid "A GUI tool to write .img and .iso files to USB sticks"
msgstr ""

#~ msgid ""
#~ "<b>Success</b>\n"
#~ " The operation completed successfully.\n"
#~ " \n"
#~ " You are free to unplug it now, a logfile\n"
#~ " (/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
#~ " you close the application."
#~ msgstr ""
#~ "<b>成功</b>\n"
#~ " 作業已經成功完成了。\n"
#~ " \n"
#~ " 您可以現在將它取出, 當您關閉程式的時候，一個檔案 isodumper.log 會被存在您"
#~ "的家目錄/.isodumper/"

#~ msgid ""
#~ "<b>Warning</b>\n"
#~ " No target devices were found. \n"
#~ "\n"
#~ " You need to plug in a USB Key\n"
#~ " to which the image can be written."
#~ msgstr ""
#~ "<b>警告 </b>\n"
#~ " 找不到目標裝置。\n"
#~ "\n"
#~ " 您需要插入一個 USB 隨身碟\n"
#~ " 以便寫入映像檔。"

#~ msgid "Details"
#~ msgstr "詳細資料"

#~ msgid "Choose the format. The device will be formatted in one partition"
#~ msgstr "選擇格式。該裝置會被格式化成一個磁碟區"

#~ msgid "Backup the device"
#~ msgstr "備份裝置"

#~ msgid "Select a folder in which to write the backup image"
#~ msgstr "選擇一個目錄以供寫入備份映像"

#~ msgid "(None)"
#~ msgstr "(無)"

#~ msgid "Create a backup of the device as image to restore it later"
#~ msgstr "建立這個裝置的映像備份以便之後還原"

#~ msgid "Select Image"
#~ msgstr "選擇映像"

#~ msgid "Select an image file to be written to the device"
#~ msgstr "選擇一個要寫入到裝置的映像檔"

#~ msgid "Select target device to write the image to"
#~ msgstr "選擇要寫入映像的目標裝置"

#~ msgid "Only for Linux systems"
#~ msgstr "只能給 Linux 系統"

#~ msgid "To handle files bigger than 4Gb"
#~ msgstr "可存放大於 4GB 的檔案"

#~ msgid "The standard. The size of files are limited to 4Gb"
#~ msgstr "標準格式。檔案大小限制為 4GB"

#~ msgid ""
#~ "<b>Error</b>\n"
#~ " Something went wrong, please see the details\n"
#~ " window for the exact error.\n"
#~ "\n"
#~ " The application will be closed with this window, and a logfile\n"
#~ " (/home/-user- or /root)/.isodumper/isodumper.log will be saved."
#~ msgstr ""
#~ "<b>Error</b>\n"
#~ " 發生問題了，詳細錯誤請查看細節視窗。\n"
#~ "\n"
#~ " 應用程式將會關閉這個視窗，在您的家目錄/.isodumper 中\n"
#~ " 會有一個紀錄檔 isodumper.log "

#~ msgid ""
#~ "<b>Warning</b>\n"
#~ " This will <b>destroy all data</b> on the target\n"
#~ " device, are you sure you want to proceed ?\n"
#~ "\n"
#~ " If you say ok here, please <b>do not unplug</b>\n"
#~ " the device during the following operation."
#~ msgstr ""
#~ "<b>警告</b>\n"
#~ " 這樣將會造成目標裝置上的<b>資料損壞</b>\n"
#~ " 確認要繼續嗎？\n"
#~ "\n"
#~ " 如果您回答是，請在執行下述操作時\n"
#~ " <b>不要移除裝置</b>"

#~ msgid "Select"
#~ msgstr "選取"

#~ msgid ""
#~ "A tool for writing ISO images on a USB stick. It's a fork of usb-"
#~ "imagewriter."
#~ msgstr ""
#~ "一個將 ISO 映像檔寫到 USB 隨身碟上的工具。它是一個 usb-imagewriter 的分支"
#~ "版本。"

#~ msgid ""
#~ "Writing is in progress. Exiting during writing will occur that the device "
#~ "or the backup will be unusable.\n"
#~ "Are you sure you want to quit during writing?"
#~ msgstr ""
#~ "寫入正在進行中。 在寫入中退出會導致該裝置或備份無法使用。\n"
#~ "您確定您想要在寫入時退出嗎?"

#~ msgid "A GUI tool to write .img and .iso files to USB Keys"
#~ msgstr "一個寫入 .img 和 .iso 檔案到 USB 隨身碟的 GUI 工具"