# Traditional Chinese translation for isodumper package. # Copyright (C) 2013 THE isodumper'S COPYRIGHT HOLDER # This file is distributed under the same license as the isodumper package. # # Translators: # Automatically generated, 2013 # FIRST AUTHOR , 2008 # You-Cheng Hsieh , 2013~2014 msgid "" msgstr "" "Project-Id-Version: isodumper\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2016-04-10 10:50+0200\n" "PO-Revision-Date: 2014-10-31 06:00+0800\n" "Last-Translator: You-Cheng Hsieh \n" "Language-Team: Chinese (Taiwan) (http://www.transifex.com/projects/p/mageia/" "language/zh_TW/)\n" "Language: zh_TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" #: lib/isodumper.py:123 #, python-format msgid "%r not known to UDisks2" msgstr "" #: lib/isodumper.py:189 msgid "Mb" msgstr "Mb" #: lib/isodumper.py:209 msgid "Target Device: " msgstr "目標裝置： " #: lib/isodumper.py:231 msgid "Backup to: " msgstr "備份在：" #: lib/isodumper.py:235 msgid "Formatting confirmation" msgstr "" #: lib/isodumper.py:240 msgid "The device was formatted successfully." msgstr "裝置已經成功格式化了。" #: lib/isodumper.py:244 msgid "An error occurred while creating a partition." msgstr "建立磁碟區時發生了一個錯誤。" #: lib/isodumper.py:248 msgid "Authentication error." msgstr "認證錯誤。" #: lib/isodumper.py:252 msgid "An error occurred." msgstr "發生一個錯誤。" #: lib/isodumper.py:289 msgid "Backup confirmation" msgstr "" #: lib/isodumper.py:289 msgid "Do you want to overwrite the file?" msgstr "您想要覆寫檔案嗎？" #: lib/isodumper.py:297 #, python-format msgid "" "The destination directory is too small to receive the backup (%s Mb needed)" msgstr "" #: lib/isodumper.py:303 lib/isodumper.py:652 msgid "Backup to:" msgstr "備份在：" #: lib/isodumper.py:323 msgid "The device is too small to contain the ISO file." msgstr "這個裝置太小而放不下 ISO 檔案。" #: lib/isodumper.py:327 msgid "Writing confirmation" msgstr "" #: lib/isodumper.py:330 msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?" msgstr "這個裝置超過 32 GB。您確定要使用它嗎？" #: lib/isodumper.py:330 lib/isodumper.py:507 msgid "Warning" msgstr "" #: lib/isodumper.py:355 msgid "Unmounting all partitions of " msgstr "卸載以下裝置的所有分區 " #: lib/isodumper.py:357 msgid "Trying to unmount " msgstr "嘗試卸載分區 " #: lib/isodumper.py:361 #, python-format msgid "Partition %s is busy" msgstr "" #: lib/isodumper.py:365 msgid " was terminated by signal " msgstr " 被信號終止 " #: lib/isodumper.py:365 lib/isodumper.py:371 msgid "Error, umount " msgstr "出錯，卸載分區 " #: lib/isodumper.py:369 msgid " successfully unmounted" msgstr " 成功卸載裝置" #: lib/isodumper.py:371 msgid " returned " msgstr " 已返回 " #: lib/isodumper.py:375 msgid "Execution failed: " msgstr "執行失敗： " #: lib/isodumper.py:384 msgid "Could not read mtab !" msgstr "無法讀取 mtab！" #: lib/isodumper.py:394 lib/isodumper.py:421 msgid "Reading error." msgstr "讀取錯誤。" #: lib/isodumper.py:402 msgid "You don't have permission to write to the device" msgstr "您沒有權限寫入這個裝置" #: lib/isodumper.py:407 lib/isodumper.py:408 msgid " to " msgstr " 至 " #: lib/isodumper.py:407 msgid "Writing " msgstr "正在寫入 " #: lib/isodumper.py:408 msgid "Executing copy from " msgstr "正在從這個來源複製" #: lib/isodumper.py:428 lib/isodumper.py:442 lib/isodumper.py:452 msgid "Writing error." msgstr "寫入錯誤。" #: lib/isodumper.py:435 msgid "Wrote: " msgstr "已寫入： " #: lib/isodumper.py:447 msgid " successfully written to " msgstr " 成功寫入到 " #: lib/isodumper.py:447 lib/isodumper.py:566 msgid "Image " msgstr "映像 " #: lib/isodumper.py:448 msgid "Bytes written: " msgstr "寫入位元組：" #: lib/isodumper.py:460 msgid "Checking " msgstr "" #: lib/isodumper.py:485 msgid "SHA1 sum: " msgstr "" #: lib/isodumper.py:486 msgid "MD5 sum: " msgstr "" #: lib/isodumper.py:495 msgid "Success" msgstr "" #: lib/isodumper.py:495 msgid "" "The operation completed successfully.
You are free to unplug it now, a " "log isodumper.log
of the operation will be saved in your homedir/." "isodumper/ when
you close the application." msgstr "" #: lib/isodumper.py:507 msgid "" "Writing is in progress. Exiting during writing
will make " "the device or the backup unusable.
Are you sure you want to " "quit during writing?" msgstr "" #: lib/isodumper.py:519 msgid "Error" msgstr "" #: lib/isodumper.py:570 lib/isodumper.py:611 #: share/applications/isodumper.desktop.in.h:1 msgid "IsoDumper" msgstr "IsoDumper" #: lib/isodumper.py:570 msgid "" "Mageia IsoDumper
----------------
This GUI program is primarily " "for safely writing a bootable ISO image to a USB flash drive,
an " "operation devious & potentially hazardous when done by hand. As a bonus, it " "can also back up the entire previous
contents of the flash drive onto " "the hard disc, and restore the flash drive to its previous state " "subsequently.
It gives also a feature for formatting the USB device." "

IsoDumper can be launched either from the menus, or a user or " "root console with the command 'isodumper'.
For normal users, the root " "password is solicited; this is necessary for the program's operation.
The flash drive can be inserted beforehand or once the program is started. " "In the latter case, a dialogue will say
that there is no flash drive " "inserted, and allow a 'retry' to find it once it is.
(You may have to " "close any automatically opened File Manager window).

The fields " "of the main window are as follows:
- Device to work on: the device of " "the USB flash drive, a drop-down list to choose from.
- Write Image: to " "choose the source ISO image *.iso (or flash drive backup file *.img) to " "write out.
- Write to device: This button launches the operation - with " "a prior warning dialogue.
The operation is shown in the progress bar " "beneath.
- Backup to: define the name and placement of the backup image " "file. The current flash
drive will be backed up to a disc file. Note " "that the entire flash drive is preserved, regardless of its actual contents;" "
ensure that you have the necessary free disc space (the same size as " "the USB device).
This backup file can be used later to restore the " "flash drive by selecting it as the source *.img file to write out.
- " "Backup the device: launch the backup operation.
- Format the device: " "create an unique partition on the entire volume in the specified format in " "FAT,
NTFS or ext. You can specify a volume name and the format in a " "new dialog box.
" msgstr "" #: lib/isodumper.py:603 msgid "Choose an image" msgstr "" #: lib/isodumper.py:604 msgid "" "Warning
This will destroy all data on the target device,
" "are you sure you want to proceed?
If you say ok here, please " "do not unplug the device during the following operation." msgstr "" #: lib/isodumper.py:639 msgid "Device to work on:" msgstr "工作的裝置:" #: lib/isodumper.py:643 msgid "Write Image:" msgstr "寫入映像：" #: lib/isodumper.py:649 msgid "&Write to device" msgstr "寫入到裝置" #: lib/isodumper.py:658 msgid "&Backup the device" msgstr "" #: lib/isodumper.py:662 msgid "Format the device in FAT, NTFS or ext:" msgstr "" #: lib/isodumper.py:664 msgid "&Format the device" msgstr "格式化裝置" #: lib/isodumper.py:677 lib/isodumper.py:785 msgid "&Refresh" msgstr "" #: lib/isodumper.py:679 msgid "&About" msgstr "" #: lib/isodumper.py:681 msgid "&Help" msgstr "" #: lib/isodumper.py:683 msgid "&Quit" msgstr "" #: lib/isodumper.py:689 msgid "UDisks2 is not available on your system" msgstr "" #: lib/isodumper.py:708 msgid "Label for the device:" msgstr "裝置的標籤:" #: lib/isodumper.py:712 msgid "FAT 32 (Windows)" msgstr "FAT 32 (Windows)" #: lib/isodumper.py:714 msgid "NTFS (Windows)" msgstr "NTFS (Windows)" #: lib/isodumper.py:716 msgid "ext4 (Linux)" msgstr "ext4 (Linux)" #: lib/isodumper.py:718 msgid "Execute" msgstr "" #: lib/isodumper.py:719 lib/isodumper.py:786 msgid "Cancel" msgstr "" #: lib/isodumper.py:784 msgid "" "Warning
No target devices were found.
You need to plug in a USB " "Key to which the image can be written." msgstr "" #: polkit/org.mageia.isodumper.policy.in.h:1 msgid "Run Isodumper" msgstr "執行 Isodumper" #: polkit/org.mageia.isodumper.policy.in.h:2 msgid "Authentication is required to run Isodumper" msgstr "執行 Isodumper 需要認證" #: share/applications/isodumper.desktop.in.h:2 msgid "A GUI tool to write .img and .iso files to USB sticks" msgstr "一個寫入 .img 和 .iso 檔案到 USB 隨身碟的 GUI 工具" #~ msgid "" #~ "Success\n" #~ " The operation completed successfully.\n" #~ " \n" #~ " You are free to unplug it now, a log isodumper.log \n" #~ " of the operation will be saved in your homedir/.isodumper/ when\n" #~ " you close the application." #~ msgstr "" #~ "成功\n" #~ " 作業已經成功完成了。\n" #~ " \n" #~ " 您可以現在將它取出, 當您關閉程式的時候，一個檔案 isodumper.log 會被存在您" #~ "的家目錄/.isodumper/" #~ msgid "" #~ "Warning\n" #~ " No target devices were found. \n" #~ "\n" #~ " You need to plug in a USB Key\n" #~ " to which the image can be written." #~ msgstr "" #~ "警告 \n" #~ " 找不到目標裝置。\n" #~ "\n" #~ " 您需要插入一個 USB 隨身碟\n" #~ " 以便寫入映像檔。" #~ msgid "Details" #~ msgstr "詳細資料" #~ msgid "Choose the format. The device will be formatted as one partition" #~ msgstr "選擇格式。該裝置會被格式化成一個磁碟區" #~ msgid "Format the device as FAT, NTFS or ext:" #~ msgstr "格式化裝置成 FAT, NTFS 或 ext:" #~ msgid "Backup the device" #~ msgstr "備份裝置" #~ msgid "Select a folder in which to write the backup image" #~ msgstr "選擇一個目錄以供寫入備份映像" #~ msgid "(None)" #~ msgstr "(無)" #~ msgid "Create a backup of the device as image to restore it later" #~ msgstr "建立這個裝置的映像備份以便之後還原" #~ msgid "Select Image" #~ msgstr "選擇映像" #~ msgid "Select an image file to be written to the device" #~ msgstr "選擇一個要寫入到裝置的映像檔" #~ msgid "Select target device to write the image to" #~ msgstr "選擇要寫入映像的目標裝置" #~ msgid "Only for Linux systems" #~ msgstr "只能給 Linux 系統" #~ msgid "To handle files bigger than 4Gb" #~ msgstr "可存放大於 4GB 的檔案" #~ msgid "The standard. The size of files are limited to 4Gb" #~ msgstr "標準格式。檔案大小限制為 4GB" #~ msgid "" #~ "Error\n" #~ " Something went wrong, please see the details\n" #~ " window for the exact error.\n" #~ "\n" #~ " The application will be closed with this window, and a logfile\n" #~ " isodumper.log will be saved in your homedir/.isodumper " #~ msgstr "" #~ "Error\n" #~ " 發生問題了，詳細錯誤請查看細節視窗。\n" #~ "\n" #~ " 應用程式將會關閉這個視窗，在您的家目錄/.isodumper 中\n" #~ " 會有一個紀錄檔 isodumper.log " #~ msgid "" #~ "Warning\n" #~ " This will destroy all data on the target\n" #~ " device, are you sure you want to proceed ?\n" #~ "\n" #~ " If you say ok here, please do not unplug\n" #~ " the device during the following operation." #~ msgstr "" #~ "警告\n" #~ " 這樣將會造成目標裝置上的資料損壞\n" #~ " 確認要繼續嗎？\n" #~ "\n" #~ " 如果您回答是，請在執行下述操作時\n" #~ " 不要移除裝置" #~ msgid "Select" #~ msgstr "選取" #~ msgid "" #~ "A tool for writing ISO images on a USB stick. It's a fork of usb-" #~ "imagewriter." #~ msgstr "" #~ "一個將 ISO 映像檔寫到 USB 隨身碟上的工具。它是一個 usb-imagewriter 的分支" #~ "版本。" #~ msgid "" #~ "Writing is in progress. Exiting during writing will make the device or " #~ "the backup unusable.\n" #~ "Are you sure you want to quit during writing?" #~ msgstr "" #~ "寫入正在進行中。 在寫入中退出會導致該裝置或備份無法使用。\n" #~ "您確定您想要在寫入時退出嗎?"