# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the isodumper package.
#
# Translators:
# Automatically generated, 2013
# FIRST AUTHOR <EMAIL@ADDRESS>, 2009
# Marek Laane <qiilaq69@gmail.com>, 2013-2015
# Marek Laane <qiilaq69@gmail.com>, 2016
# Marek Laane <qiilaq69@gmail.com>, 2018-2020
msgid ""
msgstr ""
"Project-Id-Version: Mageia\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-06-29 11:20+0200\n"
"PO-Revision-Date: 2020-06-29 10:06+0000\n"
"Last-Translator: Marek Laane <qiilaq69@gmail.com>\n"
"Language-Team: Estonian (http://www.transifex.com/MageiaLinux/mageia/"
"language/et/)\n"
"Language: et\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: backend/raw_write.py:51 backend/raw_write.py:81
msgid "Reading error."
msgstr "Tõrge lugemisel."

#: backend/raw_write.py:61
msgid "You don't have permission to write to the device {}"
msgstr "Teil pole kirjutamisõigust seadmes {}"

#: backend/raw_write.py:90 backend/raw_write.py:104 backend/raw_write.py:113
msgid "Writing error."
msgstr "Tõrge kirjutamisel."

#: backend/raw_write.py:122
msgid "Writing terminated"
msgstr "Kirjutamisest loobuti"

#: backend/raw_write.py:129
msgid "No partition is mounted."
msgstr "Ühtegi partitsiooni pole haagitud."

#: backend/raw_write.py:135
msgid "Could not read mtab ! {} {}"
msgstr "Mtab'i lugemine nurjus! {} {}"

#: backend/raw_write.py:138
msgid "Unmounting all partitions of  {}:\n"
msgstr "Haagitakse lahti kõik partitsioonid seadmes  {}:\n"

#: backend/raw_write.py:141
msgid "Trying to unmount {}...\n"
msgstr "Proovitakse lahti haakida {}...\n"

#: backend/raw_write.py:145
msgid "Partition {} is busy"
msgstr "Partitsioon {} on hõivatud"

#: backend/raw_write.py:147
msgid "Error, umount {} was terminated by signal {}"
msgstr "Tõrge, lahtihaakimine käsuga umount {} katkestati signaaliga {}"

#: backend/raw_write.py:149
msgid "{} successfully unmounted"
msgstr "{} haagiti edukalt lahti"

#: backend/raw_write.py:151
msgid "Error, umount returned {}"
msgstr "Tõrge, lahtihaakimise käsk umount tagastas {}"

#: backend/raw_write.py:153
msgid "Execution failed: {}"
msgstr "Täitmine nurjus: {}"

#: backend/raw_write.py:181
msgid "Signature file {} not found\n"
msgstr "Allkirjafaili {} ei leitud\n"

#: backend/raw_write.py:189
msgid "Sum file {} not found\n"
msgstr "Summafaili {} ei leitud\n"

#: backend/raw_write.py:218 backend/raw_write.py:223
msgid "SHA3 sum: {}"
msgstr "SHA3 summa: {}"

#: backend/raw_write.py:221
#, python-format
msgid "Invalid signature for %s"
msgstr "Vigase allkirjaga %s"

#: backend/raw_write.py:228
msgid "The {} sum check is OK and the sum is signed"
msgstr "{} summa on edukalt kontrollitud ja sel on allkiri"

#: backend/raw_write.py:231
msgid "The signature of the sum is false !"
msgstr "Kontrollumma allkiri on väär!"

#: backend/raw_write.py:234
msgid "The {} sum check is OK but the signature can't be found"
msgstr "{} summa on edukalt kontrollitud, aga allkirja ei leitud"

#: backend/raw_write.py:236
msgid "/!\\The computed and stored sums don't match"
msgstr "/!\\Arvutatud ja salvestatud summad ei klapi"

#: backend/raw_write.py:261 backend/raw_write.py:284 backend/raw_write.py:306
#: backend/raw_write.py:325 backend/raw_write.py:344 backend/raw_write.py:363
msgid "Error while doing persistent partition: "
msgstr "Tõrge püsipartitsiooni loomisel:"

#: backend/raw_write.py:281 backend/raw_write.py:367
msgid "Persistent partition done"
msgstr "Püsipartitsioon on valmis"

#: lib/isodumper.py:161
msgid "Target Device: "
msgstr "Sihtseade: "

#. I18N these are units for files size
#: lib/isodumper.py:169
msgid "B"
msgstr "B"

#: lib/isodumper.py:169
msgid "GiB"
msgstr "GiB"

#: lib/isodumper.py:169
msgid "KiB"
msgstr "KiB"

#: lib/isodumper.py:169
msgid "MiB"
msgstr "MiB"

#: lib/isodumper.py:169 lib/isodumper.py:173
msgid "TiB"
msgstr "TiB"

#: lib/isodumper.py:187
msgid "Formatting confirmation"
msgstr "Vormindamise kinnitus"

#: lib/isodumper.py:192
msgid "The device was formatted successfully."
msgstr "Seade vormindati edukalt."

#: lib/isodumper.py:196
msgid "An error occurred while creating a partition."
msgstr "Partitsiooni loomisel tekkis tõrge."

#: lib/isodumper.py:200
msgid "Authentication error."
msgstr "Tõrge autentimisel."

#: lib/isodumper.py:204
msgid "An error occurred."
msgstr "Tekkis tõrge."

#: lib/isodumper.py:225
msgid "Wrote: {}% "
msgstr "Kirjutati: {}% "

#: lib/isodumper.py:251
msgid "Backup confirmation"
msgstr "Varundamise kinnitus"

#: lib/isodumper.py:251
msgid "Do you want to overwrite the file?"
msgstr "Kas kirjutada fail üle?"

#: lib/isodumper.py:259
#, python-format
msgid ""
"The destination directory is too small to receive the backup (%s Mb needed)"
msgstr "Sihtkataloog on varukoopia jaoks liiga väike (vajalik on %s Mb)"

#: lib/isodumper.py:265 lib/isodumper.py:560 lib/isodumper.py:736
msgid "Backup to:"
msgstr "Varukoopia:"

#: lib/isodumper.py:278
#, python-brace-format
msgid "{source} successfully written to {target}"
msgstr "{source} kirjutati edukalt asukohta {target}"

#: lib/isodumper.py:300
msgid "The device is too small to contain the ISO file."
msgstr "Seade on ISO-tõmmise mahutamiseks liiga väike."

#: lib/isodumper.py:304
msgid "Writing confirmation"
msgstr "Kirjutamise kinnitus"

#: lib/isodumper.py:307
msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?"
msgstr "Seadme maht on üle 32 gigabaidi. Kas tõesti soovite seda kasutada?"

#: lib/isodumper.py:307 lib/isodumper.py:390
msgid "Warning"
msgstr "Hoiatus"

#: lib/isodumper.py:314
#, python-brace-format
msgid "Writing {source} to {target}"
msgstr "{source} kirjutatakse asukohta {target}"

#: lib/isodumper.py:315
msgid " to "
msgstr " asukohta "

#: lib/isodumper.py:315
msgid "Executing copy from "
msgstr "Kopeeritakse asukohast "

#: lib/isodumper.py:331
#, python-brace-format
msgid "Image {source} successfully written to {target}"
msgstr "Tõmmis {source} kirjutati edukalt asukohta {target}"

#: lib/isodumper.py:332
msgid "Bytes written: "
msgstr "Baite kirjutati: "

#: lib/isodumper.py:333
msgid "Checking "
msgstr "Kontrollitakse "

#: lib/isodumper.py:351
msgid "Adding persistent partition"
msgstr "Püsipartitsiooni lisamine"

#: lib/isodumper.py:354
msgid "No key for encrypted partition provided. Adding the partition aborted."
msgstr ""
"Partitsiooni krüptimiseks pole võtit antud: Partitsiooni lisamisest "
"loobutakse."

#: lib/isodumper.py:358
msgid "Added encrypted persistent partition"
msgstr "Krüptitud püsipartitsioon lisatud"

#: lib/isodumper.py:363
msgid "Added persistent partition"
msgstr "Püsipartitsioon lisatud"

#: lib/isodumper.py:378
msgid "Success"
msgstr "Kordaminek"

#: lib/isodumper.py:378
msgid ""
"The operation completed successfully.\n"
" You are free to unplug it now, a logfile \n"
"(/home/-user- or /root)/.isodumper/isodumper.log will be saved when\n"
" you close the application."
msgstr ""
"Operatsioon lõppes edukalt.\n"
" Võite nüüd USB-pulga eemaldada. Operatsiooni logifail\n"
" salvestatakse pärast rakenduse sulgemist asukohta\n"
" (/home/-kasutaja- või /root)/.isodumper/isodumper.log."

#: lib/isodumper.py:390
msgid ""
"Writing is in progress. Exiting during writing \n"
"            will make the device or the backup unusable.\n"
"            Are you sure you want to quit during writing?"
msgstr ""
"Kirjutamine käib. Väljumise korral kirjutamise ajal\n"
"            võib seade või varukoopia muutuda kasutamiskõlbmatuks.\n"
"            Kas tõesti väljuda kirjutamise ajal?"

#: lib/isodumper.py:402 lib/isodumper.py:486
msgid "Error"
msgstr "Tõrge"

#: lib/isodumper.py:442
msgid "Image "
msgstr "Tõmmis "

#: lib/isodumper.py:446 lib/isodumper.py:508
msgid "IsoDumper"
msgstr "IsoDumper"

#: lib/isodumper.py:446
msgid "Mageia IsoDumper"
msgstr "Mageia IsoDumper"

#: lib/isodumper.py:448
msgid ""
"This GUI program is primarily for safely writing a bootable ISO image to a "
"USB flash drive, an operation devious & potentially hazardous when done by "
"hand. As a bonus, it can also back up the entire previous contents of the "
"flash drive onto the hard disc, and restore the flash drive to its previous "
"state subsequently."
msgstr ""
"See graafiline kasutajaliides on esijoones mõeldud laaditava ISO-tõmmise "
"kirjutamiseks USB-pulgale, mis on üks nõudlik ja potentsiaalselt ohtlik "
"tegevus, kui seda puhtalt käsitsi teha. Lisahüvena saab kogu pulga varasema "
"sisu varundada kõvakettale ning taastada hiljem pulga varasem seisund."

#: lib/isodumper.py:452
msgid "It gives also a feature for formatting the USB device."
msgstr "Samuti saab USB-pulka vormindada."

#: lib/isodumper.py:453
msgid ""
"IsoDumper can be launched either from the menus, or a user console with the "
"command 'isodumper'."
msgstr ""
"IsoDumperi võib käivitada nii menüüst kui ka konsoolis käsuga \"isodumper\"."

#: lib/isodumper.py:454
msgid ""
"The root password is solicited when this is necessary for the program's "
"operation."
msgstr "Kui seda peaks vaja minema, küsitakse administraatori parooli."

#: lib/isodumper.py:455
msgid ""
"The flash drive can be inserted beforehand or once the program is started. "
"In the latter case, a dialogue will say that there is no flash drive "
"inserted, and allow a 'retry' to find it once it is. <BR />(You may have to "
"close any automatically opened File Manager window)."
msgstr ""
"USB-pulga võib sisestada nii eelnevalt kui ka siis. kui rakendus on juba "
"käivitatud. Viimasel juhul annab dialoog teada, et pulka pole sisestatud, ja "
"võimaldab seda \"uuesti otsida\". <BR /> (Sel puhul võib olla tarvilik "
"sulgeda automaatselt avatud failihalduri aken.)"

#: lib/isodumper.py:458
msgid ""
"The fields of the main window are as follows:<BR />- Device to work on: the "
"device of the USB flash drive, a drop-down list to choose from.<BR />- Write "
"Image: to choose the source ISO image *.iso (or flash drive backup file *."
"img) to write out.<BR />- Write to device: This button launches the "
"operation - with a prior warning dialogue."
msgstr ""
"Peaakna väljad on järgmised:<BR />-  kasutatav seade ehk USB-pulk, mida võib "
"valida rippmenüüst.<BR />- tõmmise kirjutamine: siin saab valida kirjutatava "
"ISO-tõmmise *.iso-faili (või pulga varukoopiafaili *.img).<BR />- seadmesse "
"kirjutamine - see käivitab toimingu, näidates eelnevalt hoiatust."

#: lib/isodumper.py:462
msgid ""
"- Add a persistent partition: the remaining space will be used in a new "
"partition where data from the Live system can be written and recovered "
"between sessions."
msgstr ""
"- püsipartitsiooni lisamine: järelejäänud ruum eraldatakse uuele "
"partitsioonile, kuhu saab Live-süsteemist andmeid kirjutada, mis jäävad "
"seansside vahel alles."

#: lib/isodumper.py:463
msgid ""
"- Encrypt: the persistent partition will be encrypted with the key provided "
"in <i>Key</i> field."
msgstr ""
"- krüptimine: püsipartitsiooni saab krüptida võtmega, mis on antud väljal "
"<i>Võti</i>."

#: lib/isodumper.py:464
msgid "The operation is shown in the progress bar beneath."
msgstr "Toimingu edenemist näitab allservas edenemisriba."

#: lib/isodumper.py:465
msgid ""
"- Backup to: define the name and placement of the backup image file. The "
"current flash drive will be backed up to a disc file. Note that the entire "
"flash drive is preserved, regardless of its actual contents; ensure that you "
"have the necessary free disc space (the same size as the USB device). This "
"backup file can be used later to restore the flash drive by selecting it as "
"the source *.img file to write out."
msgstr ""
"- varundamine: siin tuleb anda tõmmisefaili varukoopia nimi ja asukoht. "
"Aktiivne USB-pulk varundatakse failina kõvakettale. Arvestage, et nii jääb "
"alles terve pulga sisu sõltumata sellest, mis tegelikult pulga peal leidub: "
"Samuti tuleb hoolitseda selle eest, et kõvakettal oleks vähemalt USB-pulga "
"jagu vaba ruumi. Seda varukoopiafaili saab hiljem tarvitada USB-pulga "
"taastamiseks, valides vastava *.img-faili kirjutamiseks."

#: lib/isodumper.py:469
msgid "- Backup the device: launch the backup operation."
msgstr "- seadme varundamine: varundamise käivitamine."

#: lib/isodumper.py:470
msgid ""
"- Format the device: create an unique partition on the entire volume in the "
"specified format in FAT, exFAT, NTFS or ext. You can specify a volume name "
"and the format in a new dialog box."
msgstr ""
"- seadme vormindamine: unikaalse partitsiooni loomine tervel seadmel "
"määratud vormingus: FAT, exFAT, NTFS või ext. Uues dialoogikastis saab "
"määrata seadme nime ja vormingu."

#: lib/isodumper.py:486
msgid "There is another instance of Isodumper already running."
msgstr "Isodumper juba töötab."

#: lib/isodumper.py:500
msgid "Choose an image"
msgstr "Tõmmise valimine"

#: lib/isodumper.py:501
msgid ""
"Warning\n"
"This will destroy all data on the target device,\n"
"        are you sure you want to proceed?\n"
"        If you say ok here, please <b>do not unplug</b>        the device "
"during the following operation."
msgstr ""
"Hoiatus\n"
" See hävitab kõik andmed sihtseadmes,\n"
" kas tõesti jätkata?\n"
"\n"
" Kui olete kindel, palun <b>ärge lahutage</b>\n"
" seadet selle operatsiooni jooksul."

#: lib/isodumper.py:535
msgid "Device to work on:"
msgstr "Kasutatav seade:"

#: lib/isodumper.py:539
msgid "Write Image:"
msgstr "Tõmmise kirjutamine:"

#: lib/isodumper.py:545
msgid "&Write to device"
msgstr "Kir&juta seadmele"

#: lib/isodumper.py:550
msgid "Add a persistent partition in the remaining space"
msgstr "Püsipartitsiooni lisamine ülejäänud alale"

#: lib/isodumper.py:552
msgid "Encrypt partition"
msgstr "Partitsiooni krüptimine"

#: lib/isodumper.py:553
msgid "Key:"
msgstr "Võti:"

#: lib/isodumper.py:566
msgid "Backup the device"
msgstr "Varunda seade"

#: lib/isodumper.py:569
msgid "Format the device in FAT, exFAT, NTFS or ext:"
msgstr "Seadme vormindamine - FAT, exFAT, NTFS või ext:"

#: lib/isodumper.py:571
msgid "Format the device"
msgstr "Vorminda seade"

#: lib/isodumper.py:574
msgid "Progress"
msgstr "Edenemine"

#: lib/isodumper.py:578
msgid "Report"
msgstr "Aruanne"

#: lib/isodumper.py:581 lib/isodumper.py:691
msgid "Refresh"
msgstr "Värskenda"

#: lib/isodumper.py:583
msgid "About"
msgstr "Teave"

#: lib/isodumper.py:585
msgid "Help"
msgstr "Abi"

#: lib/isodumper.py:587
msgid "Quit"
msgstr "Välju"

#: lib/isodumper.py:593
msgid "UDisks2 is not available on your system"
msgstr "UDisks2 ei ole Teie süsteemis saadaval"

#: lib/isodumper.py:609
msgid "Label for the device:"
msgstr "Seadme nimi:"

#: lib/isodumper.py:613
msgid "FAT 32 (Windows)"
msgstr "FAT 32 (Windows)"

#: lib/isodumper.py:615
msgid "exFAT (Windows)"
msgstr "exFAT (Windows)"

#: lib/isodumper.py:617
msgid "NTFS (Windows)"
msgstr "NTFS (Windows)"

#: lib/isodumper.py:619
msgid "ext4 (Linux)"
msgstr "ext4 (Linux)"

#: lib/isodumper.py:621
msgid "Execute"
msgstr "Käivita"

#: lib/isodumper.py:622 lib/isodumper.py:692
msgid "Cancel"
msgstr "Loobu"

#: lib/isodumper.py:663
msgid "OK"
msgstr "Olgu"

#: lib/isodumper.py:673
msgid "Yes"
msgstr "Jah"

#: lib/isodumper.py:674
msgid "No"
msgstr "Ei"

#: lib/isodumper.py:682
msgid "A tool for writing ISO images to  a device"
msgstr "Tööriist ISO-tõmmiste kirjutamiseks USB-pulgale"

#: lib/isodumper.py:682
msgid "Oliver Grawert<BR />Papoteur<BR />Pictures : Timothée Giet"
msgstr "Oliver Grawert<BR />Papoteur<BR />Pildid: Timothée Giet"

#: lib/isodumper.py:690
msgid ""
"Warning\n"
"No target devices were found.\n"
"You need to plug in a USB Key to which the image can be written."
msgstr ""
"Hoiatus\n"
"Ühtegi sihtseadet ei leitud. \n"
"Teil tuleb ühendada USB-pulk,\n"
" millele saab tõmmise kirjutada."

#: polkit/org.mageia.isodumper.policy.in.h:1
msgid "Isodumper requesting write access"
msgstr "Isodumper vajab kirjutamisõigust"

#: polkit/org.mageia.isodumper.policy.in.h:2
msgid "Manatools requesting write access"
msgstr "Manatools vajab kirjutamisõigust"

#: share/applications/format-usb.desktop.in.h:1
msgid "A GUI tool to format USB sticks"
msgstr "Rakendus USB-pulkade vormindamiseks"

#: share/applications/isodumper.desktop.in.h:1
msgid "A GUI tool to write .img and .iso files to USB sticks"
msgstr "Rakendus .img- ja .iso-failide kirjutamiseks USB-pulgale"