# Czech translation for isodumper package. # Copyright (C) 2013 THE isodumper'S COPYRIGHT HOLDER # This file is distributed under the same license as the isodumper package. # # Translators: # Jiří Vírava , 2013 # Automatically generated, 2013 # FIRST AUTHOR , 2008 # fri, 2014 # fri, 2014 # Jiří Vírava , 2013-2014 # Jiří Vírava , 2013 # fri, 2014-2015 msgid "" msgstr "" "Project-Id-Version: isodumper\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2015-10-06 08:24+0200\n" "PO-Revision-Date: 2015-04-27 13:45+0000\n" "Last-Translator: fri\n" "Language-Team: Czech (http://www.transifex.com/projects/p/mageia/language/" "cs/)\n" "Language: cs\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" #: lib/isodumper.py:91 #, python-format msgid "%r not known to UDisks2" msgstr "%r neznámé UDisks2" #: lib/isodumper.py:210 msgid "UDisks2 is not available on your system" msgstr "UDisks2 není ve vašem systému dostupný" #: lib/isodumper.py:231 msgid "Mb" msgstr "Mb" #: lib/isodumper.py:247 lib/isodumper.py:410 msgid "Target Device: " msgstr "Cílové zařízení: " #: lib/isodumper.py:271 msgid "Backup in: " msgstr "Záloha za: " #: lib/isodumper.py:309 msgid "The device was formatted successfully." msgstr "Zařízení bylo úspěšně naformátováno." #: lib/isodumper.py:313 msgid "An error occurred while creating a partition." msgstr "Při vytváření diskového oddílu se vyskytla chyba." #: lib/isodumper.py:317 msgid "Authentication error." msgstr "Chyba při ověření." #: lib/isodumper.py:321 msgid "An error occurred." msgstr "Stala se chyba." #: lib/isodumper.py:385 #, python-format msgid "" "The destination directory is too small to receive the backup (%s Mb needed)" msgstr "Cílový adresář je na přijetí zálohy příliš malý (potřeba %s MB)" #: lib/isodumper.py:390 share/isodumper/isodumper.glade.h:50 msgid "Backup in:" msgstr "Záloha za:" #: lib/isodumper.py:413 msgid "The device is too small to contain the ISO file." msgstr "Zařízení je příliš malé, aby mohlo obsahovat soubor ISO." #: lib/isodumper.py:420 msgid "The device is bigger than 32 Gbytes. Are you sure you want use it?" msgstr "" "Zařízení je větší než 32 GB. Jste si jisti, že ho chcete opravdu použít?" #: lib/isodumper.py:454 msgid "Unmounting all partitions of " msgstr "Odpojují se všechny oddíly " #: lib/isodumper.py:456 msgid "Trying to unmount " msgstr "Pokouší se odpojit " #: lib/isodumper.py:462 msgid " was terminated by signal " msgstr " bylo přerušeno signálem " #: lib/isodumper.py:462 lib/isodumper.py:468 msgid "Error, umount " msgstr "Chyba, odpojení " #: lib/isodumper.py:466 msgid " successfully unmounted" msgstr " úspěšně odpojen" #: lib/isodumper.py:468 msgid " returned " msgstr " vrátilo " #: lib/isodumper.py:471 msgid "Execution failed: " msgstr "Spuštění selhalo: " #: lib/isodumper.py:479 msgid "Could not read mtab !" msgstr "Nelze přečíst mtab!" #: lib/isodumper.py:489 lib/isodumper.py:518 msgid "Reading error." msgstr "Chyba při čtení." #: lib/isodumper.py:496 msgid "You have not the rights for writing on the device" msgstr "Nemáte práva pro zápis na zařízení" #: lib/isodumper.py:502 lib/isodumper.py:503 msgid " to " msgstr " do " #: lib/isodumper.py:502 msgid "Writing " msgstr "Zapisuje se " #: lib/isodumper.py:503 msgid "Executing copy from " msgstr "Kopíruje se z " #: lib/isodumper.py:524 lib/isodumper.py:540 lib/isodumper.py:550 msgid "Writing error." msgstr "Chyba při zápisu." #: lib/isodumper.py:530 msgid "Wrote: " msgstr "Zapsáno: " #: lib/isodumper.py:545 msgid " successfully written to " msgstr " byl úspěšně zapsán do " #: lib/isodumper.py:545 lib/isodumper.py:674 msgid "Image " msgstr "Obraz " #: lib/isodumper.py:546 msgid "Bytes written: " msgstr "Zapsáno bytů: " #: lib/isodumper.py:559 msgid "Checking " msgstr "Ověřuje se" #: lib/isodumper.py:586 msgid "SHA1 sum: " msgstr "Kontrolní součet SHA1: " #: lib/isodumper.py:587 msgid "MD5 sum: " msgstr "Kontrolní součet MD5: " #: polkit/org.mageia.isodumper.policy.in.h:1 msgid "Run Isodumper" msgstr "Spustit Isodumper" #: polkit/org.mageia.isodumper.policy.in.h:2 msgid "Authentication is required to run Isodumper" msgstr "Ke spuštění Isodumper je vyžadováno ověření" #: share/applications/isodumper.desktop.in.h:1 #: share/isodumper/isodumper.glade.h:1 msgid "IsoDumper" msgstr "IsoDumper" #: share/applications/isodumper.desktop.in.h:2 msgid "A GUI tool to write .img and .iso files to USB Keys" msgstr "" "Nástroj s grafickým uživatelským rozhraním k zapsání souborů .img a .iso na " "klíčenku USB" #: share/isodumper/isodumper.glade.h:2 msgid "" "Writing is in progress. Exiting during writing will occur that the device or " "the backup will be unusable.\n" "Are you sure you want to quit during writing?" msgstr "" "Právě probíhá zápis. Ukončením během zápisu se může stát, že zařízení nebo " "záloha bude nepoužitelná.\n" "Jste si jisti, že chcete skončit během zápisu na zařízení?" #: share/isodumper/isodumper.glade.h:4 msgid "" "A tool for writing ISO images on a USB stick. It's a fork of usb-imagewriter." msgstr "" "Nástroj pro zápis ISO obrazů na USB flash disk. Je to větev USB-ImageWriteru." #: share/isodumper/isodumper.glade.h:5 msgid "Select" msgstr "Vybrat" #: share/isodumper/isodumper.glade.h:6 msgid "" "Warning\n" " This will destroy all data on the target\n" " device, are you sure you want to proceed ?\n" "\n" " If you say ok here, please do not unplug\n" " the device during the following operation." msgstr "" "Varování\n" " Toto zničí všechna data na cílovém\n" " zařízení, opravdu chcete pokračovat?\n" "\n" " Pokud budete pokračovat, prosím neodpojujte\n" " zařízení během příštích operací." #: share/isodumper/isodumper.glade.h:12 msgid "Do you want to overwrite the file?" msgstr "Chcete soubor přepsat?" #: share/isodumper/isodumper.glade.h:13 msgid "" "Error\n" " Something went wrong, please see the details\n" " window for the exact error.\n" "\n" " The application will be closed with this window, and a logfile\n" " isodumper.log will be saved in your homedir/.isodumper " msgstr "" "Chyba\n" " Něco se pokazilo, přesnou chybu zjistíte\n" " v okně s podrobnostmi.\n" " \n" " Aplikace bude s tímto oknem zavřena a soubor s obsahem\n" " záznamu isodumper.log bude uložen ve složce homedir/.isodumper" #: share/isodumper/isodumper.glade.h:19 msgid "Label for the device:" msgstr "Popisek pro zařízení:" #: share/isodumper/isodumper.glade.h:20 msgid "FAT 32 (Windows)" msgstr "FAT 32 (Windows)" #: share/isodumper/isodumper.glade.h:21 msgid "The standard. The size of files are limited to 4Gb" msgstr "Standardní. Velikost souborů je omezena na 4 GB" #: share/isodumper/isodumper.glade.h:22 msgid "NTFS (Windows)" msgstr "NTFS (Windows)" #: share/isodumper/isodumper.glade.h:23 msgid "To handle files bigger than 4Gb" msgstr "Pro práci se soubory většími než 4 GB" #: share/isodumper/isodumper.glade.h:24 msgid "ext4 (Linux)" msgstr "ext4 (Linux)" #: share/isodumper/isodumper.glade.h:25 msgid "Only for Linux systems" msgstr "Jen pro linuxové systémy" #: share/isodumper/isodumper.glade.h:26 msgid "Isodumper - Help" msgstr "Isodumper - Nápověda" #: share/isodumper/isodumper.glade.h:27 msgid "" "Mageia IsoDumper\n" "----------------\n" "This GUI program is primarily for safely writing a bootable ISO image to a " "USB flash drive, an operation devious & potentially hazardous when done by " "hand. As a bonus, it can also back up the entire previous contents of the " "flash drive onto the hard disc, and restore the flash drive to its previous " "state subsequently. It gives also a feature for formatting the USB device.\n" "\n" "IsoDumper can be launched either from the menus, or a user or root console " "with the command 'isodumper'. For normal users, the root password is " "solicited; this is necessary for the program's operation. The flash drive " "can be inserted beforehand or once the program is started. In the latter " "case, a dialogue will say that there is no flash drive inserted, and allow a " "'retry' to find it once it is. (You may have to close any automatically " "opened File Manager window).\n" "\n" "The fields of the main window are as follows:\n" "- Device to work on: the device of the USB flash drive, a drop-down list to " "choose from.\n" "- Write Image: to choose the source ISO image *.iso (or flash drive backup " "file *.img) to write out.\n" "- Write to device: This button launches the operation - with a prior warning " "dialogue. If a flash drive backup was requested, this is done first. Then " "(or only) the image file write. Each operation is shown in the progress bar " "beneath.\n" "- Backup in: define the name and placement of the backup image file. The " "current flash drive will be backed up to a disc file. Note that the entire " "flash drive is preserved, regardless of its actual contents; ensure that you " "have the necessary free disc space (the same size as the USB device). This " "backup file can be used later to restore the flash drive by selecting it as " "the source *.img file to write out.\n" "- Backup the device: launch the backup operation.\n" "- Format the device: create an unique partition on the entire volume in the " "specified format in FAT, NTFS or ext. You can specify a volume name and the " "format in a new dialog box.\n" "- Details: this button shows detailed log information.\n" "\n" msgstr "" #: share/isodumper/isodumper.glade.h:43 msgid "Device to work on:" msgstr "Zařízení, na kterém se má pracovat:" #: share/isodumper/isodumper.glade.h:44 msgid "Select target device to write the image to" msgstr "Zvolte cílové zařízení, na které chcete obraz zapsat" #: share/isodumper/isodumper.glade.h:45 msgid "Write Image:" msgstr "Zapsat obraz:" #: share/isodumper/isodumper.glade.h:46 msgid "Select an image file to be written to the device" msgstr "Zvolte soubor obrazu, který chcete zapsat na zařízení" #: share/isodumper/isodumper.glade.h:47 msgid "Select Image" msgstr "Zvolte obraz" #: share/isodumper/isodumper.glade.h:48 msgid "Write to device" msgstr "Zapsat na zařízení" #: share/isodumper/isodumper.glade.h:49 msgid "Create a backup of the device as image to restore it later" msgstr "Vytvořit zálohu zařízení jako obraz pro jeho pozdější obnovení" #: share/isodumper/isodumper.glade.h:52 msgid "(None)" msgstr "(žádná)" #: share/isodumper/isodumper.glade.h:53 msgid "Select a folder in which to write the backup image" msgstr "Zvolte složku, do které se má zapsat obraz se zálohou" #: share/isodumper/isodumper.glade.h:54 msgid "Backup the device" msgstr "Zálohovat zařízení" #: share/isodumper/isodumper.glade.h:55 msgid "Format the device in FAT, NTFS or ext:" msgstr "Formátovat zařízení na FAT, NTFS nebo ext:" #: share/isodumper/isodumper.glade.h:56 msgid "Choose the format. The device will be formatted in one partition" msgstr "Zvolte formát. Zařízení bude zformátováno do jednoho diskového oddílu" #: share/isodumper/isodumper.glade.h:57 msgid "Format the device" msgstr "Formátovat zařízení" #: share/isodumper/isodumper.glade.h:58 msgid "Details" msgstr "Podrobnosti" #: share/isodumper/isodumper.glade.h:59 msgid "" "Warning\n" " No target devices were found. \n" "\n" " You need to plug in a USB Key\n" " to which the image can be written." msgstr "" "Varování\n" " Nebyla nalezena žádná cílová zařízení. \n" "\n" " Je potřeba, abyste zastrčili zařízení USB,\n" " na které lze obraz zapsat." #: share/isodumper/isodumper.glade.h:64 msgid "" "Success\n" " The operation was successfully performed.\n" " \n" " You are free to unplug it now, a log isodumper.log \n" " of the operation will be saved in your homedir/.isodumper/ when\n" " you close the application." msgstr "" "Úspěch\n" " Operace byla úspěšně provedena.\n" " \n" " Můžete jej nyní bezpečně odebrat. Záznam\n" " operace v isodumper.log bude uložen v domovské složce,\n" " až bude aplikace zavřena (homedir/.isodumper/)."