Налаштовування способу завантаження системи
drakboot --boot
this tool
Запустити цю програму можна за допомогою термінала: достатньо ввести команду
drakboot --boot від імені адміністратора
(root).
allows you to configure the
boot options (choice of the bootloader, set a password, the default boot,
etc.)
It is found under the Boot tab in the Mageia Control Center labelled "Set up
boot system".
Don't use this tool if you don't know exactly what you are doing. Changing
some settings may prevent your machine from booting again !
In the first part, called Bootloader, it is possible to
choose which Bootloader to use, Grub or Lilo, and
with a graphical or a text menu. It is just a question of taste, there are
no other consequences. You can also set the Boot
device, don't change anything here unless you are an expert. The
boot device is where the bootloader is installed and any modification can
prevent you machine from booting.
In the second part, called Main options, you can set
the Delay before booting default image, in
seconds. During this delay, grub or Lilo will display the list of available
operating systems, prompting you to make your choice, if no selection is
made, the bootloader will boot the default one once the delay elapses.
In the third and last part, called Security, it is
possible to set a password.
За допомогою кнопки Додатково можна отримати доступ
до додаткових параметрів.
Увімкнути ACPI:
ACPI (Advanced Configuration and Power Interface) is a standard for the
power management. It can save energy by stopping unused devices, this was
the method used before APM. Check this box if your hardware is ACPI
compatible.
Увімкнути SMP
SMP stands for Symmetric Multi Processors, it's an architecture for
multicore processors.
If you have a processor with HyperThreading, Mageia will see it as a dual
processor and enable SMP.
Enable APIC and Enable Local
APIC:
APIC stands for Advanced Programmable Interrupt Controller. There are two
components in the Intel APIC system, the local APIC (LAPIC) and the I/O
APIC. This one routes the interrupts it receives them from peripheral buses
to one or more local APICs that are in the processor. It is really useful
for multi-processor systems. Some computers have problems with the APIC
system which can cause freezes or incorrect device detection (error message
"spurious 8259A interrupt: IRQ7"). In this case, disable APIC and/or Local
APIC.
Очищати /tmp при кожному перезавантаженні:
If checked, this option will empty the /tmp directory at each boot,
preventing it from become too big and clearing the trackings that don't need
to be kept.
In the Next screen, you can see the list of all the
available entries at boot time. The default one is asterisked. To change the
order of the menu entries, click on the up or down arrows to move the
selected item. If you click on the Add or
Modify buttons, a new window appears to add a new
entry in the Grub menu or to modify an existing one. You need to be familiar
with Lilo or Grub to be able to use these tools.
The Label field is freeform, write here what you want
to be displayed in the menu. It matches the Grub command "title". For
example: Mageia3.
The Image field contains the kernel name. It matches
the Grub command "kernel". For example /boot/vmlinuz.
The Root field contains the device name where the
kernel is stored. It matches the Grub command "root". For example (hd0,1).
The Append field contains the options to be given to
the kernel at boot time.
If the box Default is checked, Grub will boot this
entry by default.
In the extra screen called Advanced, it is possible to
chose the Video mode, an initrd
file and a Network profile in the drop-down lists. (Complements needed)
Запустити цю програму можна за допомогою термінала: достатньо ввести команду
drakboot --boot від імені адміністратора
(root).