drakconnect

Met deze tool U kunt deze tool op de commandoregel starten, door als root drakconnect te typen. kunt u veel instellen voor uw lokale netwerk- of internettoegang. U dient sommige gegevens te weten van uw internetprovider of uw netwerkbeheerder. Kies het verbindingstype dat u in wilt stellen, afhankelijk van de hardware en de provider die u heeft.

Het eerste venster laat de interfaces zien die beschikbaar zijn. Kies welke ingesteld moet worden. Hier wordt de keuze gegeven tussen zelf, handmatig, een IP-adres invoeren, of er automatisch een toegewezen krijgen. Automatisch IP Ethernet/IP settings: you have to select if DNS servers are declared by the DHCP server or are manually specified, as explained below. In the last case, the IP address of DNS servers has to be set. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. The Hostname can also be provided by the DHCP server with the option Assign host name from DHCP server. Not all DHCP servers have such a function and if you're setting up your PC to get an IP address from a domestic ADSL router, it is unlikely. De 'Geavanceerd'-knop geeft u de mogelijkheid te specificeren: Search domain (not accessible, as provided by the DHCP server) de DHCP-client DHCP-wachttijd YP-server van DHCP ophalen (standaard aangevinkt): specificeer de NIS-server NTPD-servers van DHCP ophalen (klokkensynchronisatie) DHCP-hostnaam: gebruik deze optie alleen als de DHCP-server vereist dat de client een hostnaam heeft alvorens een IP-adres te ontvangen. Deze optie werkt niet bij sommige DHCP-servers. After accepting, the last steps which are common to all connection configurations are explained: Handmatige configuratie Ethernet/IP settings: you need to declare what DNS servers to use. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. For a residential network, the IP address usually looks like 192.168.x.x, Netmask is 255.255.255.0, and the Gateway and DNS servers are available from your service provider's website. In advanced settings, you can specified a Search domain. It would usually be your home domain, i.e. if your computer is called "splash", and it's full domain name is "splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless you specifically need it, it's ok not to define this setting. Again, domestic ADSL would not need this setting. The next steps are exposed at

Dit deel werd nog niet geschreven door gebrek aan middelen. Als u denkt dat u dit deel kan schrijven, contacteer dan a.u.b. het Documentatieteam. Bij voorbaat dank.

Het eerste venster laat de interfaces zien die beschikbaar zijn. Kies welke ingesteld moet worden. Hier wordt de keuze gegeven tussen zelf, handmatig, een IP-adres invoeren, of er automatisch een toegewezen krijgen. U dient een authenticatiemethode in te stellen: Geen BPALogin (necessary for Telstra). In this case you have to provide User name and password. Automatisch IP Cable/IP settings: you have to select if DNS servers are declared by the DHCP server or are manually specified, as explained below. In the last case, the IP address of DNS servers has to be set. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. The Hostname can also be provided by the DHCP server with the option Assign host name from DHCP server. Not all DHCP servers have such a function and if you're setting up your PC to get an IP address from a domestic ADSL router, it is unlikely. De 'Geavanceerd'-knop geeft u de mogelijkheid te specificeren: Search domain (not accessible, as provided by the DHCP server) de DHCP-client DHCP-wachttijd YP-server van DHCP ophalen (standaard aangevinkt): specificeer de NIS-server NTPD-servers van DHCP ophalen (klokkensynchronisatie) DHCP-hostnaam: gebruik deze optie alleen als de DHCP-server vereist dat de client een hostnaam heeft alvorens een IP-adres te ontvangen. Deze optie werkt niet bij sommige DHCP-servers. After accepting, the last steps which are common to all connection configurations are explained: Handmatige configuratie Cable/IP settings: you need to declare what DNS servers to use. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. For a residential network, the IP address usually looks like 192.168.x.x, Netmask is 255.255.255.0, and the Gateway and DNS servers are available from your service provider's website. In advanced settings, you can specified a Search domain. It would usually be your home domain, i.e. if your computer is called "splash", and it's full domain name is "splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless you specifically need it, it's ok not to define this setting. Again, domestic connection would not need this setting. The next steps are exposed at

If the tool detects network interfaces, it offers to select one and to configure it. A list of providers is proposed, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave. Kies een van de beschikbare protocollen: Dynamic Host Configuration Protocol (DHCP) Handmatige TCP/IP-configuratie PPP over ADSL (PPPoA) PPP over Ethernet (PPPoE) Point to Point Tunneling Protocol (PPTP) Toegangsinstellingen Account-aanmelding (gebruikersnaam) Account password (Advanced) Virtual Path ID (VPI) (Advanced) Virtual Circuit ID (VCI) The next steps are exposed at

The wizard asks which device to configure: Manual choice (internal ISDN card) Extern ISDN modem A list of hardware is proposed, classified by category and manufacturer. Select your card. Kies een van de beschikbare protocollen: Protocol for the rest of the world, except Europe (DHCP) Protocol for Europe (EDSS1) A list of providers is then offered, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave you. Then it is asked for parameters: Verbindingsnaam Telefoonnummer Aanmeldingsnaam Account password Aanmeldingscontrole-methode After that, you have to select if you get the IP address by automatic or manual method. In the last case, specify IP address and Subnet mask. The next step is to choose how DNS servers address are obtained, by automatic or manual method. In the case of manual configuration, you have to put: Domeinnaam Eerste en tweede DNS-server Select if the hostname is set from IP. This option is to select only if you are sure that your provider is configured to accept it. The next step is to choose how the gateway address is obtained, by automatic or manual method. In the case of manual configuration, you have to enter the IP address. The next steps are exposed at

A first window lists the interfaces which are available and an entry for Windows driver (ndiswrapper). Select the one to configure. Use ndiswrapper only if the other configuration methods did not work. Hier wordt de keuze gegeven tussen de verschillende toegangspunten die de kaart ontdekt heeft. Specific parameter for the wireless card are to provide: Operating mode: Beheerd To access to an existing access point (the most frequent). Ad-Hoc To configure direct connection between computers. Netwerknaam (ESSID) Encryption mode: it depends of how the access point is configured. WPA/WPA2 This encryption mode is to prefer if your hardware allows it. WEP Some old hardware deals only this encryption method. Vercijferingssleutel It is generally provided with the hardware which give the access point. Hier kunt u kiezen tussen automatisch een IP-adres krijgen, of dat handmatig instellen. Automatisch IP IP settings: you have to select if DNS servers are declared by the DHCP server or are manually specified, as explained below. In the last case, IP address of DNS servers has to be set. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. The Hostname can also be provided by the DHCP server with the option Assign host name from DHCP server De 'Geavanceerd'-knop geeft u de mogelijkheid te specificeren: Search domain (not accessible, as provided by the DHCP server) de DHCP-client DHCP-wachttijd YP-server van DHCP ophalen (standaard aangevinkt): specificeer de NIS-servers NTPD-servers van DHCP ophalen (klokkensynchronisatie) DHCP-hostnaam: gebruik deze optie alleen als de DHCP-server vereist dat de client een hostnaam heeft alvorens een IP-adres te ontvangen. Deze optie werkt niet bij sommige DHCP-servers. After accepting the configuration the step, which is common to all connection configurations, is explained: Handmatige configuratie IP settings: you have to declare DNS servers. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. For a residential network, the IP address always looks like 192.168.x.x, Netmask is 255.255.255.0, and the Gateway and DNS servers are available from your providers website. In advanced settings, you can specified a Search domain. It must seem to your hostname without the first name, before the period. The next steps are exposed at

If the tool detects wireless interfaces, it offers to select one and to configure it. The PIN is asked. Leave empty if the PIN is not required. The wizard asks for network. If it is not detected, select the option Unlisted. A list of providers is proposed, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave. Provide access settings Naam toegangspunt Account-aanmelding (gebruikersnaam) Account password The next steps are exposed at

Dit deel werd nog niet geschreven door gebrek aan middelen. Als u denkt dat u dit deel kan schrijven, contacteer dan a.u.b. het Documentatieteam. Bij voorbaat dank.

The wizard asks which device to configure: Handmatige keuze Gevonden hardware, indien van toepassing. A list of ports is proposed. Select your port. Indien dat nog niet gebeurd is, zal voorgesteld worden dat u het pakket kppp-provider installeert. A list of providers is proposed, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave. Then it is asked for Dialup options: Verbindingsnaam Telefoonnummer Aanmeldingsnaam Wachtwoord Aanmeldingscontrole, kies tussen: PAP/CHAP Script-gebaseerd PAP Gebaseerd op een terminal CHAP The next steps are exposed at

In de volgende stap kunt u instellen: Gebruikers toestaan de verbinding te beheren De verbinding bij het opstarten maken Schakel 'traffic-accounting' in Sta toe dat deze interface door Network Manager beheerd wordt In the case of a wireless connection, a supplemental box is Allow access point roaming which give the possibility to switch automatically between access point according to the signal strength. Met de 'Geavanceerd'-knop kunt u instellen: Metrisch MTU "Hot"-aansluiten van netwerk Schakel IPv6 naar IPv4 tunnel in De laatste stap laat u instellen of de verbinding meteen moet starten, of niet.