drakconnect

This tool Komando-lerrotik tresna hau abiaraz dezakezu, drakconnect root bezala idatziz. allows to configure much of local network or Internet access. You have to know some information from your access provider or your network administrator. Select the type of connection you want to set, according to which hardware and provider you have.

The first window lists the interfaces which are available. Select the one to configure. Puntu honetan, IP helbide automatiko edo eskuzko bat aukeratzea ematen da. IP Automatikoa Ethernet/IP settings: you have to select if DNS servers are declared by the DHCP server or are manually specified, as explained below. In the last case, the IP address of DNS servers has to be set. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. The Hostname can also be provided by the DHCP server with the option Assign host name from DHCP server. Not all DHCP servers have such a function and if you're setting up your PC to get an IP address from a domestic ADSL router, it is unlikely. Botoi aurreratuak aukera zehatzak ematen ditu: Search domain (not accessible, as provided by the DHCP server) DHCP bezeroa erabili DHCP denbora muga Get YP server from DHCP (checked by default): specify the NIS server Get NTPD server from DHCP (synchronisation of clocks) the HOSTNAME required by DHCP. Only use this option if the DHCP server requires the client to specify a hostname before receiving an IP address. This option is not dealt by some DHCP servers. After accepting, the last steps which are common to all connection configurations are explained: Eskuzko konfigurazioa Ethernet/IP settings: you need to declare what DNS servers to use. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. For a residential network, the IP address usually looks like 192.168.x.x, Netmask is 255.255.255.0, and the Gateway and DNS servers are available from your service provider's website. In advanced settings, you can specified a Search domain. It would usually be your home domain, i.e. if your computer is called "splash", and it's full domain name is "splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless you specifically need it, it's ok not to define this setting. Again, domestic ADSL would not need this setting. The next steps are exposed at

This section hasn't been written yet for lack of resources. If you think you can write this help, please contact the Doc team. Thanking you in advance.

The first window lists the interfaces which are available. Select the one to configure. Puntu honetan, IP helbide automatiko edo eskuzko bat aukeratzea ematen da. Egiaztatze-metodo bat zehaztu behar duzu: Bat ere ez BPALogin (necessary for Telstra). In this case you have to provide User name and password. IP Automatikoa Cable/IP settings: you have to select if DNS servers are declared by the DHCP server or are manually specified, as explained below. In the last case, the IP address of DNS servers has to be set. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. The Hostname can also be provided by the DHCP server with the option Assign host name from DHCP server. Not all DHCP servers have such a function and if you're setting up your PC to get an IP address from a domestic ADSL router, it is unlikely. Botoi aurreratuak aukera zehatzak ematen ditu: Search domain (not accessible, as provided by the DHCP server) DHCP bezeroa erabili DHCP denbora muga Get YP server from DHCP (checked by default): specify the NIS server Get NTPD server from DHCP (synchronisation of clocks) the HOSTNAME required by DHCP. Only use this option if the DHCP server requires the client to specify a hostname before receiving an IP address. This option is not dealt by some DHCP servers. After accepting, the last steps which are common to all connection configurations are explained: Eskuzko konfigurazioa Cable/IP settings: you need to declare what DNS servers to use. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. For a residential network, the IP address usually looks like 192.168.x.x, Netmask is 255.255.255.0, and the Gateway and DNS servers are available from your service provider's website. In advanced settings, you can specified a Search domain. It would usually be your home domain, i.e. if your computer is called "splash", and it's full domain name is "splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless you specifically need it, it's ok not to define this setting. Again, domestic connection would not need this setting. The next steps are exposed at

If the tool detects network interfaces, it offers to select one and to configure it. A list of providers is proposed, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave. Protokolo erabilgarrietako bat hautatu ezazu: Dynamic Host Configuration Protocol (DHCP) Eskuzko TCP/IP konfigurazioa PPP ADSL gainetik (PPPoA) PPP over Ethernet (PPPoE) Point to Point Tunneling Protocol (PPTP) Sarbide ezarpenak Kontuaren identifikatzailea (erabiltzaile-izena) Kontu pasahitza (Aurreratuta) Bide Birtualeko ID-a (VPI) (Aurreratuta) Zirkuitu Birtualeko ID-a (VCI) The next steps are exposed at

Morroiak zein gailu konfiguratuko den: Eskuz aukeratu (ISDN txartela) Kanpoko ISDN modema Hardware-zerrenda bat proposatzen da, kategoria eta fabrikatzailearen arabera sailkatuta. Aukeratu zure txartela. Protokolo erabilgarrietako bat hautatu ezazu: Gainontzeko muduarentzat Protokoloa, Europan ezik (DHCP) Europarako Protokoloa (EDSS1) A list of providers is then offered, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave you. Then it is asked for parameters: Konexio-izena Telefono-zenbakia Saio-hasierako ID Kontu pasahitza Egiaztatze-metodoa After that, you have to select if you get the IP address by automatic or manual method. In the last case, specify IP address and Subnet mask. The next step is to choose how DNS servers address are obtained, by automatic or manual method. In the case of manual configuration, you have to put: Domeinu-izena: Lehen eta bigarren DNS zerbitzariak Select if the hostname is set from IP. This option is to select only if you are sure that your provider is configured to accept it. The next step is to choose how the gateway address is obtained, by automatic or manual method. In the case of manual configuration, you have to enter the IP address. The next steps are exposed at

A first window lists the interfaces which are available and an entry for Windows driver (ndiswrapper). Select the one to configure. Use ndiswrapper only if the other configuration methods did not work. At this step, the choice is given between the different access points that the card has detected. Haririk gabeko txartel parametro espezifikoak dira ematen: Jardun modua: Kudeatua Oraingo sarbide-puntu batera atzitu (ohikoena). Ad-Hoc Ordenagailuen arteko konexio zuzena konfiguratzeko. Sare Izena (ESSID) Encryption mode: it depends of how the access point is configured. WPA/WPA2 This encryption mode is to prefer if your hardware allows it. WEP Hardware zahar batzuk enkriptazio metodo hau soilik jorratzen dute. Enkriptatze-gakoa It is generally provided with the hardware which give the access point. At this step, the choice is given between an automatic IP address or a manual IP address. IP Automatikoa IP settings: you have to select if DNS servers are declared by the DHCP server or are manually specified, as explained below. In the last case, IP address of DNS servers has to be set. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. The Hostname can also be provided by the DHCP server with the option Assign host name from DHCP server Botoi aurreratuak aukera zehatzak ematen ditu: Search domain (not accessible, as provided by the DHCP server) DHCP bezeroa erabili DHCP denbora muga Get YP server from DHCP (checked by default): specify the NIS servers Get NTPD server from DHCP (synchronisation of clocks) the HOSTNAME required by DHCP. Only use this option if the DHCP server requires the client to specify a hostname before receiving an IP address. This option is not dealt by some DHCP servers. After accepting the configuration the step, which is common to all connection configurations, is explained: Eskuzko konfigurazioa IP settings: you have to declare DNS servers. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. For a residential network, the IP address always looks like 192.168.x.x, Netmask is 255.255.255.0, and the Gateway and DNS servers are available from your providers website. In advanced settings, you can specified a Search domain. It must seem to your hostname without the first name, before the period. The next steps are exposed at

If the tool detects wireless interfaces, it offers to select one and to configure it. The PIN is asked. Leave empty if the PIN is not required. The wizard asks for network. If it is not detected, select the option Unlisted. A list of providers is proposed, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave. Sarbidearen ezarpenak eman Sarbide Puntuaren Izena Kontuaren identifikatzailea (erabiltzaile-izena) Kontu pasahitza The next steps are exposed at

This section hasn't been written yet for lack of resources. If you think you can write this help, please contact the Doc team. Thanking you in advance.

Morroiak zein gailu konfiguratuko den: Eskuzko aukera Hardwarea detektatu, baldin badago. Portu-zerrenda bat proposatzen da. Aukeratu zure ataka. If not yet installed, it will be suggested that you install the package kppp-provider. A list of providers is proposed, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave. Then it is asked for Dialup options: Konexio izena Telefono zenbakia Saioa hastko ID-a Pasa-hitza Autentifikazioa, aukeratu artean: PAP/CHAP Script-ean oinarritua PAP Terminalean oinarritua CHAP The next steps are exposed at

Hurrengo urratsean, zehaztu ahal izango duzu: Erabiltzaileak baimendu konexioa kudeatzeko Hasi konexioa abioan Gaitu trafikoaren kontabilitatea Onartu interfazea Network Managerrek kontrolatzea In the case of a wireless connection, a supplemental box is Allow access point roaming which give the possibility to switch automatically between access point according to the signal strength. Botoi aurreratuaren bidez, zehaztu ahal izango duzu: Metrika (10 lehenespenez) MTU Sareko Hotplugging-a Gaitu IPv6-tik IPv4-ra tunela Azken urratsa ahalbidetzen du zehaztea konexioa berehala hastea edo ez .