Instalar y configurar una impresora system-config-printer
Introducción La impresión se gestiona en Mageia por un servidor denominado CUPS. Tiene su propio interfaz de configuración que es accesible a través de un navegador de Internet, pero Mageia ofrece su propia herramienta para la instalación de impresoras llamada system-config-printer que se comparte con otras distribuciones como Fedora, Mandriva, Ubuntu y openSUSE. sted debe habilitar el repositorio non-free antes de proceder con la instalación, debido a que algunos controladores sólo pueden estar disponibles en este modo. Printer installation is carried out in the Hardware section of the Mageia Control Centre. Select the Configure printing and scanning tool You can start this tool from the command line, by typing system-config-printer. The root password will be asked for. . MCC le preguntará por la instalación de dos paquetes:
task-printing-server task-printing-hp
Es necesario aceptar esta instalación para continuar. Hasta 230MB de dependencias son necesarios. Para agregar una impresora, seleccione el botón de "Agregar" la impresora. El sistema intentará detectar las impresoras y los puertos disponibles. La captura de pantalla muestra una impresora conectada a un puerto paralelo. Si se detecta una impresora, tal como una impresora en un puerto USB, que se mostrará en la primera línea. La ventana también intentará configurar una impresora de red.
Impresora detectada automáticamente This usually refers to USB printers. The utility automatically finds the name of the printer and displays it. Select the printer and then click "Next". If there is a known driver associated for the printer, it will be automatically installed. If there is more than one driver or no known drivers, a window will ask you to select or furnish one, as explained in the next paragraph. Continue with
No detectó automáticamente la impresora Cuando se selecciona un puerto, el sistema carga una lista de controladores y muestra una ventana para seleccionar un driver. La elección puede hacerse a través de una de las siguientes opciones. Seleccione la impresora desde la base de datos proporcionar archivo PPD buscar un controlador para descargar Al seleccionar a partir de la base de datos, la ventana sugiere un fabricante de la impresora primero, y luego un dispositivo y un controlador asociado con él. Si se sugiere más de un controlador, seleccionar uno que se recomienda, a menos que se haya encontrado con algunos problemas antes, en este caso, seleccionar el que sabe que funciona.
Completar el proceso de instalación Después de la selección del controlador, una ventana solicitara alguna información que le permitirá al sistema designar y descubrir la impresora. La primera línea es el nombre con el que aparecerá el dispositivo en las aplicaciones en la lista de impresoras disponibles. El programa de instalación sugiere entonces la impresión de una página de prueba. Después de este paso, se agrega la impresora y aparece en la lista de impresoras disponibles.
Impresora en red Las impresoras de red son impresoras que están conectadas directamente a una red cableada o inalámbrica, que están conectadas a un servidor de impresión o que están unidas a otra estación de trabajo que sirve como servidor de impresión. A menudo, es mejor configurar el servidor DHCP para que siempre asocie una dirección IP fija a la dirección MAC de la impresora. Por supuesto que debe ser la misma dirección IP de la impresora del servidor de impresión, si tiene uno fijo. The printer's Mac-address is a serial number given to the printer or printserver or computer it is attached to, that can be obtained from a configuration page printed by the printer or which may be written on a label on the printer or printserver. If your shared printer is attached to a Mageia system, you can run ifconfig on it as root to find the MAC-address. It is the sequence of numbers and letters after "HWaddr". You can add your network printer by choosing the protocol it uses to talk to your computer over the network. If you don't know which protocol to choose, you can try the Network Printer - Find Network Printer option in the Devices menu and give the IP address of the printer in the box on the right, where it says "host". Si la herramienta reconoce la impresora o el servidor de impresión, propondrá un protocolo y una cola, pero usted puede elegir uno más apropiado de la lista siguiente o darle el nombre de la cola correcta si no está en la lista. Busque en la documentación que acompaña a la impresora o servidor de impresión para encontrar protocolo(s) que apoya y los posibles nombres de cola específicos.
Protocolos de impresión por red One current technique is one developed by Hewlett-Packard and known as JetDirect. It allows access to a printer directly connected to the network via an Ethernet port. You must know the IP-address at which the printer is known on the network. This technique is also used inside some ADSL-routers which contain an USB port to connect the printer. In this case, the IP-address is that of the router. Note that the tool "Hp Device manager" can manage dynamically configured IP-adress, setting an URI like hp:/net/<name-of-the-printer> . In this case, fixed IP-adress is not required. Choose the option AppSocket/HP JetDirect as the protocol and set the address in Host:, do not change the Port Number, unless you know that it needs to be changed. After the selection of the protocol, the selection of the driver is the same as above. Los otros protocolos son: Internet Printing Protocol (ipp): a printer which can be accessed on a TCP/IP network via the IPP protocol, for example a printer connected to a station using CUPS. This protocol may also be used also by some ADSL-routers. Internet Printing Protocol (https): the same as ipp, but using http transport and with TLS secured protocol. The port has to be defined. By default, the port 631 is used. Internet Printing Protocol (ipps): the same as ipp, but with TLS secured protocol. LPD/LPR host or Printer: a printer which can be accessed on a TCP/IP network via the LPD protocol, for example a printer connected to a station using LPD. Windows printer via SAMBA: a printer connected to a station running Windows or a SMB server and shared. El URI también se puede añadir directamente. Estos son algunos ejemplos de cómo formar el URI: Appsocket socket://ip-address-or-hostname:port Protocolo de Impresion por Internet (IPP) ipp://ip-address-or-hostname:port-number/resource http://ip-address-or-hostname:port-number/resource Line Printer Daemon (LPD) Protocol lpd://username@ip-address-or-hostname/queue Additional information can be found in the CUPS documentation.
Propiedades del dispositivo You can access the properties of the device. The menu allows access to parameters for the CUPS server. By default a CUPS server is launched on your system, but you can specify a different one with the Server | Connect... menu, another window which gives access to the tuning of other specific parameters of the server, following Server | Settings.
Solución de problemas You can find some information on occurring errors during printing by inspecting /var/log/cups/error_log You can also access to a tool to diagnose problems using the Help | Troubleshoot menu.
Especificos It is possible that some drivers for specific printers are not available in Mageia or are not functional. In this case, have a look at the openprinting site to check if a driver for your device is available. If yes, check if the package is already present in Mageia and in this case install it manually. Then, redo the installation process to configure the printer. In all cases, report the problem in bugzilla or on the forum if you are comfortable with this tool and furnish the model and driver information and whether the printer works or not after installation. Here are some sources to find other up-to-date drivers or for more recent devices. Impresoras Brother This page give a list of drivers provided by Brother. Search the driver for your device, download the rpm(s) and install. Deberá instalar controladores de Brother antes de ejecutar la utilidad de configuración. Impresoras Hewlett-Packard y dispositivos todo en uno These devices use the hplip tool. It is installed automatically after the detection or the selection of the printer. You can find other information here. The tool "HP Device Manager" is available in the System menu. Also view configuration for the management of the printer. Un dispositivo HP TAll in one solo debe ser instalado como una impresora y se añadirán las funciones del escáner. Tenga en cuenta que, a veces, la interfaz Xsane no permite escanear películas o diapositivas (la iluminación deslizante puede no funcionar). En este caso, es posible escanear, utilizando el modo independiente, y guarde la imagen en una tarjeta de memoria o memoria USB insertada en el dispositivo. Después, abra el software de imágenes favorito y cargue su fotografía de la tarjeta de memoria en la carpeta /media. impresoara a color Samsung For specific Samsung and Xerox colour printers, this site provides drivers for the QPDL protocol. impresoras y scaners Epson Drivers for Epson printers are available from this search page. For the scanner part, you must install the "iscan-data" package first, then "iscan" (in this order). A iscan-plugin package can also be available and is to install. Choose the rpm packages according to your architecture. Es posible que el paquete iScan generaré una advertencia sobre un conflicto con sane. Los usuarios han informado que esta advertencia puede ser ignorada. impresoras Canon For Canon printers, it may be advisable to install a tool named turboprint available here .