Installation und Einrichten eines Druckers system-config-printer
Einleitung Drucken unter Mageia wird von einem Server namens CUPS verwaltet. Es besitzt eine eigene Konfigurationsoberfläche welche über den Internetbrowser verfügbar ist, allerdings bietet Mageia ein eigenes Werkzeug um Drucker zu installieren, welches system-config-printer genannt wird und auch in anderen Distributionen wie Fedora, Madriva, Ubuntu und openSUSE verwendet wird. Sie sollten die non-free Repositorys aktivieren bevor Sie die Installation fortfahren, da einige Treiber nur auf diesem Weg verfügbar sind. Die Druckerinstallation wird in der Hardware-Sektion des Mageia Kontrollzentrums angeboten. Wähle das Konfigurieren des Druckers und Scanners Werkzeug Sie können dieses Werkzeug von der Kommandozeile starten, durch Eingabe von system-config-printer. Das root Passwort wird hierfür abgefragt. . MCC wird bezüglich der Installation von zwei Paketen nachfragen:
task-printing-server task-printing-hp
Es ist nötig die Installation zu akzeptieren um fortzufahren. Bis zu 230MB an Abhängigkeiten werden benötigt. Um einen Drucker hinzuzufügen, wähle den "Hinzufügen" Knopf. Das System wird versuchen jeden Drucker und die verfügbaren Ports zu erkennen. Der Screenshot zeigt einen Drucker, der mit einem Parallelport verbunden ist. Wenn ein Drucker erkannt wurde, wie ein Drucker am USB-Anschluss, wird dieser in der ersten Zeile angezeigt. Das Fenster bietet auch das konfigurieren von Netzwerkdrucker an.
Automatisch erkannte Drucker Dies bezieht sich hauptsächlich auf USB Drucker. Das Werkzeug findet automatisch den Namen des Druckers und zeigt diesen an. Wähle den Drucker aus und klicke auf "Weiter". Falls ein bekannter Treiber für den Drucker zugeordnet werden kann wird dieser automatisch installiert. Falls es mehr als einen Treiber gibt oder kein bekannter Treiber gefunden wurde wird ein Fenster Sie auffordern, einen auszuwählen oder bereitzustellen, wie im nächsten Absatz beschrieben. Fahre fort mit
Nicht automatisch erkannte Drucker Wenn Sie einen Port auswählen wird das System eine Treiberliste laden und ein Fenster anzeigen um einen Treiber auszuwählen. Die Auswahl kann anhand von einer der folgenden Möglichkeiten getroffen werden. Einen Drucker aus der Datenbank auswählen eine PPD Datei bereitstellen nach einem herunterladbaren Treiber suchen Bei der Auswahl "Drucker aus Datenbank auswählen", schlägt das Fenster zuerst einen Druckerhersteller vor, anschließend ein Gerät und einen Treiber welcher zu diesem zugeordnet werden kann. Falls mehr als ein Treiber vorgeschlagen wird, wähle einen der empfohlen wird, außer Sie haben vorher bereits Probleme mit diesem festgestellt. In dem Fall wählen Sie einen, bei dem Sie wissen das er funktioniert.
Installationsvorgang abschließen After the driver selection, a window requests some information which will allow the system to designate and discover the printer. The first line is the name under which the device will appear in applications in the list of available printers. The installer then suggests printing a test page. After this step, the printer is added and appears in the list of available printers.
Netzwerkdrucker Netzwerkdrucker sind Drucker welche direkt an ein kabelgebundenes oder drahtloses Netzwerk verbunden sind, welche mit einem Druckserver verbunden sind oder welche, die mit einer Workstation verbunden sind der als Druckserver dient. Häufig ist es besser den DHCP Server so zu konfigurieren, dass immer eine feste IP Adresse für die MAC-Adresse des Druckers vergeben wird. Dies sollte natürlich auch die selbe IP Adresse sein, die der Drucker über einen Druckserver festgelegt bekam, falls eine feste IP festgelegt wurde. Die Drucker MAC-Adresse ist eine Seriennummer, die der Drucker, Druckserver oder Computer erhalten hat, welche anhand einer durch den Drucker gedruckten Konfigurationsseite oder möglicherweise auf einem Etikett am Drucker oder Druckserver entnommen werden kann. Falls der für die gemeinsame Nutzung freigegebene Drucker am Mageia System angeschlossen ist, können Sie dort als root ifconfig ausführen, um die MAC-Adresse anzeigen zu lassen. Es ist eine Zusammenstellung aus Nummern und Buchstaben nach "HWaddr". You can add your network printer by choosing the protocol it uses to talk to your computer over the network. If you don't know which protocol to choose, you can try the Network Printer - Find Network Printer option in the Devices menu and give the IP address of the printer in the box on the right, where it says "host". If the tool recognises your printer or printserver, it will propose a protocol and a queue, but you can choose a more appropriate one from the list below it or give the correct queue name if it isn't in the list. Schauen Sie in die Beschreibung, welche Sie mit Ihrem Drucker oder Druckserver erhalten haben, um herauszufinden welche(s) Protokoll(e) dieser unterstützt und für mögliche festgelegte Namen der Druckerwarteschlange.
Netzwerkdruck-Protokolle One current technique is one developed by Hewlett-Packard and known as JetDirect. It allows access to a printer directly connected to the network via an Ethernet port. You must know the IP-address at which the printer is known on the network. This technique is also used inside some ADSL-routers which contain an USB port to connect the printer. In this case, the IP-address is that of the router. Note that the tool "Hp Device manager" can manage dynamically configured IP-adress, setting an URI like hp:/net/<name-of-the-printer> . In this case, fixed IP-adress is not required. Choose the option AppSocket/HP JetDirect as the protocol and set the address in Host:, do not change the Port Number, unless you know that it needs to be changed. After the selection of the protocol, the selection of the driver is the same as above. Die weiteren Protokolle sind: Internet Printing Protocol (ipp): Ein Drucker worüber über das TCP/IP Netzwerk mit dem IPP Protokoll zugegriffen werden kann, z. B. ein Drucker der mit einer Station über CUPS verbunden ist. Dieses Protokoll wird womöglich auch von einigen ADSL Router verwendet. Internet Printing Protocol (https): Das gleiche wie ipp, jedoch wird für die Übertragung HTTP und das abgesicherte TLS Protokoll verwendet. Der Port muss festgelegt werden. Als Standard wird der Port 631 verwendet. Internet Printing Protocol (ipps): Das selbe wie ipp, jedoch mit dem abgesicherten TLS Protokoll. LPD/LPR Host oder Drucker: Ein Drucker worüber über das TCP/IP Netzwerk mit dem LPD Protokoll zugegriffen werden kann, z. B. ein Drucker der mit einer Station über LPD verbunden ist. Windows-Drucker via SAMBA: Ein Drucker der mit einer Station verbunden ist, welche mit Windows oder einem SMB Server läuft und im Netzwerk freigegeben wurde. Die URI kann auch direkt eingegeben werden. Hier sind einige Beispiele wie sich die URI zusammensetzt: Appsocket socket://ip-address-or-hostname:port Internet Printing Protocol (IPP) ipp://ip-address-or-hostname:port-number/resource http://ip-address-or-hostname:port-number/resource Line Printer Daemon (LPD)-Protokoll lpd://username@ip-address-or-hostname/queue Weitere Informationen finden Sie in der CUPS-Dokumentation.
Geräteeigenschaften You can access the properties of the device. The menu allows access to parameters for the CUPS server. By default a CUPS server is launched on your system, but you can specify a different one with the Server | Connect... menu, another window which gives access to the tuning of other specific parameters of the server, following Server | Settings.
Problembehebung Sie können einige Informationen zu auftretende Fehler während dem Drucken in /var/log/cups/error_log finden You can also access to a tool to diagnose problems using the Help | Troubleshoot menu.
Specifics It is possible that some drivers for specific printers are not available in Mageia or are not functional. In this case, have a look at the openprinting site to check if a driver for your device is available. If yes, check if the package is already present in Mageia and in this case install it manually. Then, redo the installation process to configure the printer. In all cases, report the problem in bugzilla or on the forum if you are comfortable with this tool and furnish the model and driver information and whether the printer works or not after installation. Here are some sources to find other up-to-date drivers or for more recent devices. Brother Drucker This page give a list of drivers provided by Brother. Search the driver for your device, download the rpm(s) and install. Sie sollten die Brother Treiber installieren bevor Sie das Konfigurationsprogramm starten. Hewlett-Packard Drucker und Multifunktionsgeräte These devices use the hplip tool. It is installed automatically after the detection or the selection of the printer. You can find other information here. The tool "HP Device Manager" is available in the System menu. Also view configuration for the management of the printer. A HP All in one device must be installed as a printer and the scanner features will be added. Note that sometimes, the Xsane interface doesn't allow to scan films or slides (the lighting slid can't operate). In this case, it is possible to scan, using the standalone mode, and save the picture on a memory card or USB stick inserted in the device. Afterwards, open your favourite imaging software and load your picture from the memory card which is appeared in the /media folder. Samsung Farbdrucker For specific Samsung and Xerox colour printers, this site provides drivers for the QPDL protocol. Epson Drucker und Scanner Drivers for Epson printers are available from this search page. For the scanner part, you must install the "iscan-data" package first, then "iscan" (in this order). A iscan-plugin package can also be available and is to install. Choose the rpm packages according to your architecture. It is possible that the iscan package will generate a warning about a conflict with sane. Users have reported that this warning can be ignored. Canon Drucker For Canon printers, it may be advisable to install a tool named turboprint available here .