Scanner einrichtenscannerdrakeInstallationDieses Werkzeug Sie können dieses Werkzeug von der Kommandozeile starten, durch Eingabe von
scannerdrake als root. erlaubt Ihnen ein
einfaches Scannergerät oder ein Multifunktionsgerät mit einem Scanner,
einzurichten. Es erlaubt Ihnen auch lokale Geräte, die mit diesem Computer
verbunden sind, mit einem entfernten Rechner zu teilen oder auf entfernte
Scanner zuzugreifen.Wenn Sie das Werkzeug das erste Mal starten, erhalten Sie womöglich folgende
Meldung:"Die SANE-Pakete müssen installiert sein um Scanner nutzen zu
können.Wollen Sie die SANE-Pakete installieren?"Wähle Ja um fortzufahren. Es wird
scanner-gui und task-scanning installiert, falls
diese noch nicht installiert sind.Wenn Ihr Scanner korrekt identifiziert wurde, wie in dem oberen Bildschrim,
sehen Sie den Namen des Scanners und der Scanner ist bereit zur Verwendung
mit, zum Beispiel, XSane oder Simple
Scan.In that case, you might now want to want to configure the Scanner
sharing option. You can read about it in the .However, if your scanner hasn't been correctly identified, and checking its
cable(s) and power switch and then pressing Search for new
scanners doesn't help, you'll need to press Add a
scanner manually.Choose the brand of your scanner in the list you see, then its type from the
list for that brand and click OkWenn Sie ihren Scanner nicht in der Liste finden können, klicke auf
AbbrechenBitte überprüfe auf der SANE:
Supported Devices Seite, ob Ihr Scanner unterstützt wird und frage
nach Hilfe in den Foren.You can leave this setting to Auto-detect available
ports unless your scanner's interface is a parallel port. In that
case, select /dev/parport0 if you have only one.After clicking Ok, in most cases you will see a screen
similar to the one below.If you don't get that screen, then please read the .ScannersharingHere you can choose whether the scanners connected to this machine should be
accessible by remote machines and by which remote machines. You can also
decide here whether scanners on remote machines should be made available on
this machine.Scanner sharing to hosts : name or IP address of hosts can be added or
deleted from the list of hosts allowed to access the local device(s), on
this computer.Usage of remote scanners : name or IP address of hosts can added or deleted
from the list of hosts which give access to a remote scanner.Scanner mit folgenden Rechnern teilen: Sie können einen Rechner hinzufügen.Scanner sharing to hosts: specify which host(s) to add, or allow all remote
machines."All remote machines" are allowed to access the local scanner.If the package saned is not yet installed, the tool
offers to do it.At the end, the tool will alter these files:/etc/sane.d/saned.conf/etc/sane.d/net.conf/etc/sane.d/dll.conf to add or comment the directive
"net"It will also configure saned and
xinetd to be started on boot.SpecificsHewlett-PackardMost HP scanners are managed from HP Device Manager
(hplip) which also manages printers. In this case, this tool does not allow
you to configure it and invites you to use HP Device
Manager.EpsonDrivers are available from this
page. When indicated, you must install the
iscan-data package first, then
iscan (in this order). It is possible that the
iscan package will generate a warning about a conflict
with sane. Users have reported that this warning can be
ignored.Zusätzliche InstallationsschritteIt is possible that after selecting a port for your scanner in the screen, you need to take one or more extra
steps to correctly configure your scanner.In some cases, you're told the scanner needs its firmware to be uploaded
each time it is started. This tool allows you to load it into the device,
after you installed it on your system. In this screen you can install the
firmware from a CD or a Windows installation, or install the one you
downloaded from an Internet site of the vendor.
When your device's firmware needs to be loaded, it can take a long time at
each first usage, possibly more than one minute. So be patient.Also, you may get a screen telling you to adjust the
/etc/sane.d/"name_of_your_SANE_backend".conf file.Read those or other instructions you get carefully and if you don't know
what to do, feel free to ask for help in the forums.