Eine Netzwerkschnittstelle erstellen (LAN, ISDN, ADSL, ...)drakconnectEinleitungThis toolSie können das Programm über die Kommandozeile aufrufen, indem Sie drakconnect als root eingeben. allows to configure much of
local network or Internet access. You have to know some information from
your access provider or your network administrator.Wähle die Art der Verbindung die Sie einrichten möchten, abhängig von der
Hardware und dem Provider den Sie nutzen.Eine neue kabelgebundene Verbindung (Ethernet)Das erste Fenster listet die verfügbaren Geräte auf. Wähle das Gerät aus,
das eingerichtet werden soll.An diesem Punkt können Sie zwischen einer automatisch generierten oder
manuell eingegebenen IP Adresse wählen.Automatische IPEthernet/IP settings: you have to select if DNS servers
are declared by the DHCP server or are manually specified, as explained
below. In the last case, the IP address of DNS servers has to be set. The
HOSTNAME of the computer can be specified here. If no HOSTNAME is specified,
the name localhost.localdomain is attributed by default.
The Hostname can also be provided by the DHCP server with the option
Assign host name from DHCP server. Not all DHCP servers
have such a function and if you're setting up your PC to get an IP address
from a domestic ADSL router, it is unlikely.The advanced button give the opportunity to specify:Search domain (not accessible, as provided by the DHCP server)der DHCP-ClientDHCP ZeitüberschreitungGet YP server from DHCP (checked by default): specify the NIS serverNTPD-Server via DHCP bekommen (Synchronisation der Uhr)the HOSTNAME required by DHCP. Only use this option if the DHCP server
requires the client to specify a hostname before receiving an IP
address. This option is not dealt by some DHCP servers.After accepting, the last steps which are common to all connection
configurations are explained: Manuelle KonfigurationEthernet/IP settings: you need to declare what DNS
servers to use. The HOSTNAME of the computer can be specified here. If no
HOSTNAME is specified, the name localhost.localdomain is
attributed by default.For a residential network, the IP address usually looks like
192.168.x.x, Netmask is
255.255.255.0, and the Gateway and DNS servers are
available from your service provider's website.In advanced settings, you can specified a Search
domain. It would usually be your home domain, i.e. if your
computer is called "splash", and it's full domain name is
"splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless
you specifically need it, it's ok not to define this setting. Again,
domestic ADSL would not need this setting.The next steps are exposed at Eine neue Satelliten-Verbindung (DVB)This section hasn't been written yet for lack of resources. If you think you
can write this help, please contact the Doc
team. Thanking you in advance.Eine neue Modem-VerbindungDas erste Fenster listet die verfügbaren Geräte auf. Wähle das Gerät aus,
das eingerichtet werden soll.An diesem Punkt können Sie zwischen einer automatisch generierten oder
manuell eingegebenen IP Adresse wählen.Sie müssen eine Authentifizierungsmethode angeben:KeineBPALogin (necessary for Telstra). In this case you have to provide User name
and password.Automatische IPCable/IP settings: you have to select if DNS servers
are declared by the DHCP server or are manually specified, as explained
below. In the last case, the IP address of DNS servers has to be set. The
HOSTNAME of the computer can be specified here. If no HOSTNAME is specified,
the name localhost.localdomain is attributed by default.
The Hostname can also be provided by the DHCP server with the option
Assign host name from DHCP server. Not all DHCP servers
have such a function and if you're setting up your PC to get an IP address
from a domestic ADSL router, it is unlikely.The advanced button give the opportunity to specify:Search domain (not accessible, as provided by the DHCP server)der DHCP-ClientDHCP ZeitüberschreitungGet YP server from DHCP (checked by default): specify the NIS serverNTPD-Server via DHCP bekommen (Synchronisation der Uhr)the HOSTNAME required by DHCP. Only use this option if the DHCP server
requires the client to specify a hostname before receiving an IP
address. This option is not dealt by some DHCP servers.After accepting, the last steps which are common to all connection
configurations are explained: Manuelle KonfigurationCable/IP settings: you need to declare what DNS servers
to use. The HOSTNAME of the computer can be specified here. If no HOSTNAME
is specified, the name localhost.localdomain is
attributed by default.For a residential network, the IP address usually looks like
192.168.x.x, Netmask is
255.255.255.0, and the Gateway and DNS servers are
available from your service provider's website.In advanced settings, you can specified a Search
domain. It would usually be your home domain, i.e. if your
computer is called "splash", and it's full domain name is
"splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless
you specifically need it, it's ok not to define this setting. Again,
domestic connection would not need this setting.The next steps are exposed at Eine neue DSL-VerbindungIf the tool detects network interfaces, it offers to select one and to
configure it.A list of providers is proposed, classified by countries. Select your
provider. If it is not listed, select the option
Unlisted and then enter the options your provider gave.Wählen Sie eins der verfügbaren Protokolle aus:Dynamic Host Configuration Protocol (DHCP)Manuelle TCP/IP KonfigurationPPP über ADSL (PPPoA)PPP über Ethernet (PPPoE)Point-to-Point Tunneling Protocol (PPTP)ZugangseinstellungenBenutzername (Login)Passwort(Fortgeschrittener) Virtuelle Pfad-ID (VPI):(Fortgeschrittener) Virtuelle Circuit-ID (VCI):The next steps are exposed at Eine neue ISDN-VerbindungDer Assistent fragt welches Gerät konfiguriert werden soll:Manuelle Auswahl (Interne ISDN-Karte)Externes ISDN-ModemA list of hardware is proposed, classified by category and
manufacturer. Select your card.Wählen Sie eins der verfügbaren Protokolle aus:Protocol for the rest of the world, except Europe (DHCP)Protokoll für Europa (EDSS1)A list of providers is then offered, classified by countries. Select your
provider. If it is not listed, select the option
Unlisted and then enter the options your provider gave
you. Then it is asked for parameters:Name der VerbindungTelefonnummerLogin-IDPasswortAuthentifizierungsmethodeAfter that, you have to select if you get the IP address by automatic or
manual method. In the last case, specify IP address and Subnet mask.The next step is to choose how DNS servers address are obtained, by
automatic or manual method. In the case of manual configuration, you have to
put:Name der DomäneErster und zweiter DNS ServerSelect if the hostname is set from IP. This option is to select only if you
are sure that your provider is configured to accept it.The next step is to choose how the gateway address is obtained, by automatic
or manual method. In the case of manual configuration, you have to enter the
IP address.The next steps are exposed at Eine neue Drahtlos-VerbindungDas erste Fenster listet die Geräte welche verfügbar sind, sowie einen
Eintrag für Windows Treiber (ndiswrapper). Wähle das Gerät aus welches
Eingerichtet werden soll. Verwende ndiswrapper nur wenn die anderen
Konfigurationsmethoden nicht funktionieren.In diesem Schritt haben Sie die Auswahl zwischen verschiedene
Zugriffspunkte, welche die Karte gefunden hat.Spezifische Parameter für die WLAN Karte müssen bereitgestellt werden:BetriebsmodusGeführtTo access to an existing access point (the most frequent).DirektUm eine direkte Verbindung zwischen Computern zu konfigurieren.Netzwerkname (ESSID)Verschlüsselungsmodus: Dies hängt davon ab wie der Zugriffspunkt
konfiguriert ist.WPA/WPA2Dieses Verschlüsselungsverfahren wird empfohlen, wenn es Ihre Hardware
unterstützt.WEPEinige alte Hardware unterstützt nur dieses Verschlüsselungsverfahren.SchlüsselIt is generally provided with the hardware which give the access point.In diesem Schritt haben Sie die Auswahl zwischen einer automatisch
generierten IP-Adresse oder einer manuellen IP-Adresse.Automatische IPIP settings: you have to select if DNS servers are
declared by the DHCP server or are manually specified, as explained
below. In the last case, IP address of DNS servers has to be set. The
HOSTNAME of the computer can be specified here. If no HOSTNAME is
specified, the name localhost.localdomain is attributed by default. The
Hostname can also be provided by the DHCP server with the option
Assign host name from DHCP serverThe advanced button give the opportunity to specify:Search domain (not accessible, as provided by the DHCP server)der DHCP-ClientDHCP ZeitüberschreitungGet YP server from DHCP (checked by default): specify the NIS serversNTPD-Server via DHCP bekommen (Synchronisation der Uhr)the HOSTNAME required by DHCP. Only use this option if the DHCP server
requires the client to specify a hostname before receiving an IP
address. This option is not dealt by some DHCP servers.After accepting the configuration the step, which is common to all
connection configurations, is explained: Manuelle KonfigurationIP settings: you have to declare DNS servers. The
HOSTNAME of the computer can be specified here. If no HOSTNAME is specified,
the name localhost.localdomain is attributed by default.For a residential network, the IP address always looks like
192.168.x.x, Netmask is
255.255.255.0, and the Gateway and DNS servers are
available from your providers website.In advanced settings, you can specified a Search
domain. It must seem to your hostname without the first name,
before the period.The next steps are exposed at Eine neue GPRS/Edge/3G VerbindungIf the tool detects wireless interfaces, it offers to select one and to
configure it.The PIN is asked. Leave empty if the PIN is not required.The wizard asks for network. If it is not detected, select the option
Unlisted.A list of providers is proposed, classified by countries. Select your
provider. If it is not listed, select the option
Unlisted and then enter the options your provider gave.Provide access settingsAccess-Point-NameBenutzername (Login)PasswortThe next steps are exposed at A new Bluetooth Dial-Up Networking connectionThis section hasn't been written yet for lack of resources. If you think you
can write this help, please contact the Doc
team. Thanking you in advance.A new Analog telephone modem connection (POTS)Der Assistent fragt welches Gerät konfiguriert werden soll:Manuelle AuswahlGefundene Hardware, falls vorhandenA list of ports is proposed. Select your port.If not yet installed, it will be suggested that you install the package
kppp-provider.A list of providers is proposed, classified by countries. Select your
provider. If it is not listed, select the option
Unlisted and then enter the options your provider
gave. Then it is asked for Dialup options:Verbindungs NameTelefon NumberLogin IDPasswortAuthentikation, Auswahl:PAP/CHAPSkript-basiertPAPTerminal-basiertCHAPThe next steps are exposed at Beenden der KonfigurationIm nächsten Schritt können Sie festlegen:Den Benutzer die Verwaltung der Verbindung ermöglichenStarten der Verbindung beim BootenNetzwerkverkehr-Protokollierung aktivierenErlaubt der Schnittstelle vom Netzwerk-Manager gesteuert zu
werdenIn the case of a wireless connection, a supplemental box is Allow
access point roaming which give the possibility to switch
automatically between access point according to the signal strength.Mit dem Fortgeschrittene Optionen Knopf können Sie festlegen:Metrisch (standardmäßig 10)MTUNetzwerk HotpluggingAktiviere IPv6-zu-IPv4-TunnelDer letzte Schritt erlaubt Ihnen festzulegen, ob die Verbindung sofort
aufgebaut werden soll oder nicht.