# SOME DESCRIPTIVE TITLE # Copyright (C) YEAR Mageia # This file is distributed under the same license as the Mageia Installer Help package. # # Translators: # 吴善俊 <sjwuny@126.com>, 2013 # xiao wenming <xwm-citcc5@hotmail.com>, 2015 # zwpwjwtz <zwpwjwtz@126.com>, 2016 # 吴善俊 <sjwuny@126.com>, 2013 # 周潇波 <zhouxiaobo.500@gmail.com>, 2014 msgid "" msgstr "" "Project-Id-Version: Mageia\n" "Report-Msgid-Bugs-To: doc-discuss@ml.mageia.org\n" "POT-Creation-Date: 2016-02-10 16:29+0200\n" "PO-Revision-Date: 2016-03-21 14:13+0000\n" "Last-Translator: zwpwjwtz <zwpwjwtz@126.com>\n" "Language-Team: Chinese (China) (http://www.transifex.com/MageiaLinux/mageia/" "language/zh_CN/)\n" "Language: zh_CN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" #. type: Content of: <section><info><title> #: en/acceptLicense.xml:25 msgid "License and Release Notes" msgstr "许可证和发行说明" #. type: Content of: <section><mediaobject> #: en/acceptLicense.xml:29 msgid "" "<imageobject condition=\"classical\"> <imagedata xml:id=\"acceptLicense-" "im1\" revision=\"4\" align=\"center\" format=\"PNG\" fileref=\"dx2-license." "png\"/> </imageobject> <imageobject> <imagedata xml:id=\"acceptLicense-im2\" " "revision=\"5\" align=\"center\" condition=\"live\" format=\"PNG\" fileref=" "\"live-license.png\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata xml:id=\"acceptLicense-" "im1\" revision=\"4\" align=\"center\" format=\"PNG\" fileref=\"dx2-license." "png\"/> </imageobject> <imageobject> <imagedata xml:id=\"acceptLicense-im2\" " "revision=\"5\" align=\"center\" condition=\"live\" format=\"PNG\" fileref=" "\"live-license.png\"/> </imageobject>" #. type: Content of: <section><section><info><title> #: en/acceptLicense.xml:40 msgid "License Agreement" msgstr "许可协议" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:43 msgid "" "Before installing <application>Mageia</application>, please read the license " "terms and conditions carefully." msgstr "" "在安装 <application>Mageia</application> 之前，请先仔细阅读许可条款和许可条" "件。" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:46 msgid "" "These terms and conditions apply to the entire <application>Mageia</" "application> distribution and must be accepted before you can continue." msgstr "" "这些许可条款和许可条件适用于整个 <application>Mageia</application> 发行版，你" "必须予以接受才能继续安装。" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:50 msgid "" "To accept, simply select <guilabel>Accept</guilabel> and then click on " "<guibutton>Next</guibutton>." msgstr "" "要接受, 只要选择 <guilabel>接受</guilabel> 后点击 <guibutton>下一步</" "guibutton>." #. type: Content of: <section><section><para> #: en/acceptLicense.xml:53 msgid "" "If you decide not to accept these conditions, then we thank you for looking. " "Clicking <guibutton>Quit</guibutton> will reboot your computer." msgstr "" "若你不希望接受这些条件，我们向您表示诚挚歉意。请点击 <guibutton>退出</" "guibutton> 来重启计算机。" #. type: Content of: <section><section><info><title> #: en/acceptLicense.xml:63 msgid "Release Notes" msgstr "发行说明" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:70 msgid "" "Important information are given about this release of <application>Mageia</" "application> and are accessible clicking on the <guibutton>Release Notes</" "guibutton> button." msgstr "" "有关此 Mageia 发布版本的重要信息，可以通过点击 <guibutton>发行说明</" "guibutton> 来阅读。" #. type: Attribute 'xml:lang' of: <section> #: en/add_supplemental_media.xml:2 en/DrakLive-cover.xml:2 en/DrakLive.xml:1 #: en/DrakX-cover.xml:2 en/DrakX.xml:1 en/media_selection.xml:1 msgid "en" msgstr "zh_CN" #. type: Content of: <section><info><title> #: en/add_supplemental_media.xml:10 msgid "Media Selection (Configure Supplemental Installation Media)" msgstr "介质选择 (设置增补的安装介质)" #. papoteur 2013-04-13 - created #. marja 2013-04-16 added screenshot and expanded title (because is was the same as for media_selection #. marja 2013-04-16 s/a optical/an optcal/ s/support/disc/ s/or or/or/ s/at/during/ as suggested by Tristan Campbell #. type: Content of: <section><mediaobject> #: en/add_supplemental_media.xml:18 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-" "add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-" "add_supplemental_media-im1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-" "add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-" "add_supplemental_media-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/add_supplemental_media.xml:24 msgid "" "This screen gives you the list of already recognized repositories. You can " "add other sources for packages, like an optical disc or a remote source. The " "source selection determines which packages will be available for selection " "during the next steps." msgstr "" "此窗口中列出了已识别的软件仓库。你可以添加其他的软件源，如光盘或远程资源。所" "选的源将决定下一步中哪些软件包可用于安装。" #. type: Content of: <section><para> #: en/add_supplemental_media.xml:29 msgid "For a network source, there are two steps to follow:" msgstr "如果需要获取网络资源，请执行以下两步：" #. type: Content of: <section><orderedlist><listitem><para> #: en/add_supplemental_media.xml:33 msgid "Choosing and activation of the network, if not already up." msgstr "若尚未启用网络链接，请选择并启用它。" #. type: Content of: <section><orderedlist><listitem><para> #: en/add_supplemental_media.xml:37 msgid "" "Selecting a mirror or specifying a URL (very first entry). By selecting a " "mirror, you have access to the selection of all repositories managed by " "Mageia, like the Nonfree , the Tainted repositories and the Updates. With " "the URL, you can designate a specific repository or your own NFS " "installation." msgstr "" "选择一个镜像，或指定 URL（第一个选项）。若选择了镜像，则您需要能够访问所选择" "的所有仓库（由 Mageia 管理，例如 Nonfree、Tainted 和 Updates）。若指定了 " "URL，则可以使用特定的仓库或您的个人 NFS。" #. type: Content of: <section><note><para> #: en/add_supplemental_media.xml:46 msgid "" "If you are updating a 64 bit installation which may contain some 32 bit " "packages, it is advised to use this screen to add an online mirror by " "ticking one of the Network protocols here. The 64 bit DVD iso only contains " "64 bit and noarch packages, it will not be able to update the 32 bit " "packages. However, after adding an online mirror, installer will find the " "needed 32 bit packages there." msgstr "" "若您整从包含 32 位软件包的版本升级到 64 位，我们建议您使用此窗口添加在线镜像" "（勾选一个网络协议）。64 位 DVD iso 仅包含 64 位软件包和非特定架构的软件包。" "若添加了在线镜像，则所需 32 位软件包也会被显示在这里。" #. type: Content of: <section><info><title> #: en/addUser.xml:3 msgid "User and Superuser Management" msgstr "用户和管理员管理" #. Started by marja,using Led43's text, on 2012 03 27 #. NEEDS TO BE REVIEWED! #. SimonNZG 2012-04-03 has taken a look but needs to come back #. removed para xml:id's, finished the page using Led43's text in the wiki, but #. changed his text about the Advanced User Managment screen (the only thing #. about guest account there, is the box you can tick or untick to enable or #. disable it, the rest is about the normal user you're adding in the previous #. screen), marja, 20120409 #. barjac 2012-04-13 moved explanation of xguest lower down. I don't understand #. "rbash" in the xguest warning - is that correct? #. JohnR 2012-04-19 Language proofreading #. marja 2012-04-24 Added screenshot #. marja 2013-04-26 added new note #. type: Content of: <section><mediaobject> #: en/addUser.xml:28 msgid "" "<imageobject condition=\"classical\"> <imagedata revision=\"1\" align=" "\"center\" xml:id=\"setRootPassword-im1\" fileref=\"dx2-setRootPassword.png" "\" format=\"PNG\"/> </imageobject> <imageobject> <imagedata format=\"PNG\" " "fileref=\"live-user1.png\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata revision=\"1\" align=" "\"center\" xml:id=\"setRootPassword-im1\" fileref=\"dx2-setRootPassword.png" "\" format=\"PNG\"/> </imageobject> <imageobject> <imagedata format=\"PNG\" " "fileref=\"live-user1.png\"/> </imageobject>" #. type: Content of: <section><section><info><title> #: en/addUser.xml:39 msgid "Set Administrator (root) Password:" msgstr "设置管理员(root账户)密码：" #. type: Content of: <section><section><para> #: en/addUser.xml:43 msgid "" "It is advisable for all <application>Mageia</application> installations to " "set a superuser or administrator's password, usually called the " "<emphasis>root password</emphasis> in Linux. As you type a password into the " "top box the colour of its shield will change from red to yellow to green " "depending on the strength of the password. A green shield shows you are " "using a strong password. You need to repeat the same password in the box " "just below the first password box, this checks that you have not mistyped " "the first password by comparing them." msgstr "" "我们建议任何时候安装 <application>Mageia</application> 都设置一个超级用户或管" "理员密码（Linux 中一般叫做 root 密码）。当你在顶部输入框中输入密码时，盾的颜" "色将会从红色变为黄色、绿色，用以指示你所输入密码的强度。绿色表示你的密码强度" "较高。你需要在下方输入框中在此输入相同的密码，以确保你之前的密码没有输错。" #. type: Content of: <section><section><note><para> #: en/addUser.xml:53 msgid "" "All passwords are case sensitive, it is best to use a mixture of letters " "(upper and lower case), numbers and other characters in a password." msgstr "" "所有的密码都区分大小写。建议子啊密码中混合使用字母（大写和小写）、数字和其他" "字符。" #. type: Content of: <section><section><info><title> #: en/addUser.xml:61 msgid "Enter a user" msgstr "输入用户名" #. type: Content of: <section><section><para> #: en/addUser.xml:64 msgid "" "Add a user here. A user has fewer rights than the superuser (root), but " "enough to surf the internet, use office applications or play games and " "anything else the average user does with his computer" msgstr "" "在这里添加一个用户。一个用户拥有比超级管理员更少的权限，但是网上冲浪，使用办" "公软件或者玩游戏等是足够的。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:70 msgid "" "<guibutton>Icon</guibutton>: if you click on this button it will change the " "users icon." msgstr "<guibutton>图标</guibutton>：若点击此按钮，则会改变用户图标。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:75 msgid "" "<guilabel>Real Name</guilabel>: Insert the users real name into this text " "box." msgstr "<guilabel>真实姓名</guilabel>：在文本框中输入用户的真名。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:80 msgid "" "<guilabel>Login Name</guilabel>: Here you enter the user login name or let " "drakx use a version of the users real name. <emphasis>The login name is case " "sensitive.</emphasis>" msgstr "" "<guilabel>登录名</guilabel>：输入用户的登录名，或让 drakx 根据真实姓名自动设" "置。<emphasis>登录名区分大小写。</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:86 msgid "" "<guilabel>Password</guilabel>: In this text box you should type in the user " "password. There is a shield at the end of the text box that indicates the " "strength of the password. (See also <xref linkend=\"givePassword\"/>)" msgstr "" "<guilabel>密码</guilabel>：在此文本框中输入用户密码。后面的盾牌图标将会指示密" "码强度。（参见 <xref linkend=\"givePassword\"/>）" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:92 msgid "" "<guilabel>Password (again)</guilabel>: Retype the user password into this " "text box and drakx will check you have the same password in each of the user " "password text boxes." msgstr "" "<guilabel>密码（重复）</guilabel>：再输入依次用户密码。drakx 将会检查两次输入" "的密码是否一致。" #. type: Content of: <section><section><note><para> #: en/addUser.xml:99 msgid "" "Any user you add while installing Mageia, will have a world readable (but " "write protected) home directory." msgstr "任何在安装 Mageia 时添加的用户将拥有一个全局可读（但写保护）的主目录。" #. type: Content of: <section><section><note><para> #: en/addUser.xml:102 msgid "" "However, while using your new install, any user you add in <emphasis>MCC - " "System - Manage users on system</emphasis> will have a home directory that " "is both read and write protected." msgstr "" "不过，在使用系统时，通过 <emphasis>Mageia 控制中心 - 系统 -管理系统用户</" "emphasis>添加的用户将拥有其他用户不可读且不可写的主目录。" #. type: Content of: <section><section><note><para> #: en/addUser.xml:106 msgid "" "If you don't want a world readable home directory for anyone, it is advised " "to only add a temporary user now and to add the real one(s) after reboot." msgstr "" "若您不希望为任何人创建全局可读的主目录，则现在最好只添加一个临时用户，然后在" "重启后添加您所需要的用户。" #. type: Content of: <section><section><note><para> #: en/addUser.xml:110 msgid "" "If you prefer world readable home directories, you might want to add all " "extra needed users in the <emphasis>Configuration - Summary</emphasis> step " "during the install. Choose <emphasis>User management</emphasis>." msgstr "" "若您需要全局可读主目录，你可能需要在安装的<emphasis>配置 - 概要</emphasis>这" "一步中添加有此需要的用户。请在<emphasis>用户管理</emphasis>中进行此操作。。" #. type: Content of: <section><section><note><para> #: en/addUser.xml:115 msgid "The access permissions can also be changed after the install." msgstr "也可以在安装完成后改变访问权限。" #. type: Content of: <section><section><info><title> #: en/addUser.xml:122 msgid "Advanced User Management" msgstr "高级用户管理" #. type: Content of: <section><section><para> #: en/addUser.xml:125 msgid "" "If the <guibutton>advanced</guibutton> button is clicked you are offered a " "screen that allows you to edit the settings for the user you are adding." msgstr "" "若点击<guibutton>高级</guibutton>按钮，您可以在弹出的窗口中对所添加的用户进行" "设置。" #. type: Content of: <section><section><para> #: en/addUser.xml:129 msgid "Additionally, you can disable or enable a guest account." msgstr "此外，您还可以禁用或启用来宾账户。" #. type: Content of: <section><section><warning><para> #: en/addUser.xml:133 msgid "" "Anything a guest with a default <emphasis>rbash</emphasis> guest account " "saves to his /home directory will be erased when he logs out. The guest " "should save his important files to a USB key." msgstr "" "任何使用<emphasis>rbash</emphasis>来宾账户创建的文件将会在注销后被删除。来宾" "应当将他/她的临时文件存储于 U 盘等设备中。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:140 msgid "" "<guilabel>Enable guest account</guilabel>: Here you can enable or disable a " "guest account. The guest account allows a guest to log into and use the PC, " "but he has more restricted access than normal users." msgstr "" "<guilabel>启用来宾账户</guilabel>：这里您可以启用或禁用来宾账户。来宾账户允许" "来宾登录并使用电脑，但对其使用更严格的访问权限控制。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:147 msgid "" "<guilabel>Shell</guilabel>: This drop down list allows you to change the " "shell used by the user you are adding in the previous screen, options are " "Bash, Dash and Sh" msgstr "" "<guilabel>Shell</guilabel>：可以在下列列表中选择用户所使用的 shell（在上一步" "中添加），可能的选项有 Bash、Dash 和 Sh。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:153 msgid "" "<guilabel>User ID</guilabel>: Here you can set the user ID for the user you " "are adding in the previous screen. This is a number. Leave it blank unless " "you know what you are doing." msgstr "" "<guilabel>用户 ID</guilabel>：这里您可以设置之前所添加的用户的 ID（数值）。若" "您不确定如何设置，请将其留空。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:159 msgid "" "<guilabel>Group ID</guilabel>: This lets you set the group ID. Also a " "number, usually the same one as for the user. Leave it blank unless you know " "what you are doing." msgstr "" "<guilabel>组 ID</guilabel>：这里您可以设置之前所添加的用户的 组 ID（数值，一" "般与用户 ID 相同）。若您不确定如何设置，请将其留空。" #. type: Content of: <section><info><title> #: en/ask_mntpoint_s.xml:11 msgid "Choose the mount points" msgstr "选择挂载点" #. Made by marja on 2012 03 28 #. NEEDS TO BE REVIEWED! #. SimonNZG 2012-04-03 has taken a look but needs to come back #. removed para xml:id's, marja, 20120409 #. barjac 14/04/2012 Minor edit to improve grammar and replaced "at least ONE" #. with "a", as I can't imagine having more than one root partition ;) #. Lebarhon : I put [] where it seems having mistakes #. Marja: you're right, in English English it is "its type", however, the Americans #. write "it's type". And you're right about the redundant part, too, I removed it #. And JohnR says the Americans are WRONG! :-)) #. 2012-04-19 Language proofreading done #. type: Content of: <section><mediaobject> #: en/ask_mntpoint_s.xml:27 msgid "" "<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-" "chooseMountpoints.png\" align=\"center\" format=\"PNG\" xml:id=" "\"chooseMountPoints-im1\"></imagedata> </imageobject> <imageobject " "condition='live'> <imagedata revision=\"1\" fileref=\"live-chooseMountpoints." "png\" align=\"center\" format=\"PNG\" xml:id=\"live-chooseMountPoints-" "im1\"></imagedata> </imageobject>" msgstr "" "<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-" "chooseMountpoints.png\" align=\"center\" format=\"PNG\" xml:id=" "\"chooseMountPoints-im1\"></imagedata> </imageobject> <imageobject " "condition='live'> <imagedata revision=\"1\" fileref=\"live-chooseMountpoints." "png\" align=\"center\" format=\"PNG\" xml:id=\"live-chooseMountPoints-" "im1\"></imagedata> </imageobject>" #. type: Content of: <section><para> #: en/ask_mntpoint_s.xml:37 msgid "" "Here you see the Linux partitions that have been found on your computer. If " "you don't agree with the <application>DrakX</application> suggestions, you " "can change the mount points." msgstr "" "这里你可以查看已找到的 Linux 分区。如果 <application>DrakX</application> 的建" "议不合适，你可以手动更改挂载点。" #. type: Content of: <section><note><para> #: en/ask_mntpoint_s.xml:42 msgid "" "If you change anything, make sure you still have a <literal>/</literal> " "(root) partition." msgstr "" "如果进行了更改，请确保你仍然具有访问 <literal>/</literal> （根）分区的权限。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:48 msgid "" "Every partition is shown as follows: \"Device\" (\"Capacity\", \"Mount point" "\", \"Type\")." msgstr "所有分区的属性将按下列顺序显示：“设备名”（“容量”，“挂载点”，“类型”）。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:53 msgid "" "\"Device\", is made up of: \"hard drive\", [\"hard drive number\"(letter)], " "\"partition number\" (for example, \"sda5\")." msgstr "" "“设备名”包括：“硬盘驱动器”，[“硬盘驱动器编号”（由字母表示）]，“分区编号”。例" "如，“sda5”表示第一个 SCSI 设备上的第五个分区。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:59 msgid "" "If you have many partitions, you can choose many different mount points from " "the drop down menu, such as <literal>/</literal>, <literal>/home</literal> " "and <literal>/var</literal>. You can even make your own mount points, for " "instance <literal>/video</literal> for a partition where you want to store " "your films, or <literal>/cauldron-home</literal> for the <literal>/home</" "literal> partition of a cauldron install." msgstr "" "如果存在多个分区，你可以从下列列表中选择不同的挂载点来使用，例如 <literal>/</" "literal>、<literal>/home</literal> 和 <literal>/var</literal>。也可以自定义挂" "载点，例如将 <literal>/video</literal> 用于存储视频文件，<literal>/cauldron-" "home</literal> 用于 cauldron 系统的用户主目录。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:69 msgid "" "For partitions you don't need to have access to, you can leave the mount " "point field blank." msgstr "对于非必需的分区，挂载点一项可以留空。" #. type: Content of: <section><warning><para> #: en/ask_mntpoint_s.xml:75 msgid "" "Choose <guibutton>Previous</guibutton> if you are not sure what to choose, " "and then tick <guilabel>Custom disk partitioning</guilabel>. In the screen " "that follows, you can click on a partition to see its type and size." msgstr "" "如果不确定如何选择，请点击 <guibutton>上一步</guibutton> 按钮，然后点击 " "<guilabel>自定义磁盘分区</guilabel>，在出现的窗口中点击分区来查看其类型和大" "小。" #. type: Content of: <section><para> #: en/ask_mntpoint_s.xml:81 msgid "" "If you are sure the mount points are correct, click on <guibutton>Next</" "guibutton>, and choose whether you only want to format the partition(s) " "DrakX suggests, or more." msgstr "" "若确定挂载点设置正确，则可点击 <guibutton>下一步</guibutton>，并确定是否根据 " "DrakX 的建议格式化分区等。" #. type: Content of: <section><info><title> #: en/bestTime.xml:10 msgid "Clock settings" msgstr "时钟设置" #. type: Content of: <section><mediaobject> #: en/bestTime.xml:14 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"live-bestTime.png\" " "format=\"PNG\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"live-bestTime.png\" " "format=\"PNG\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/bestTime.xml:20 msgid "" "In this step, you have to select on which time your internal clock is set, " "either local time or UTC time." msgstr "在这一步中，你需要选择内部时钟的计时方式（本地时间或 UTC 时间）。" #. type: Content of: <section><para> #: en/bestTime.xml:23 msgid "In advanced tab, you will find more options about clock settings." msgstr "在高级选项卡中，你可以找到更多有关时钟设置的选项。" #. type: Content of: <section><info><title> #: en/bootLive.xml:3 msgid "Boot Mageia as Live system" msgstr "引导 Mageia Live 系统" #. type: Content of: <section><section><info><title> #: en/bootLive.xml:8 msgid "Booting the medium" msgstr "引导媒体" #. type: Content of: <section><section><section><info><title> #: en/bootLive.xml:13 msgid "From a disc" msgstr "自磁盘" #. type: Content of: <section><section><section><para> #: en/bootLive.xml:16 msgid "" "You can boot directly from the media you used to burn your image (CD-ROM, " "DVD-ROM...). You usually just need to insert it in your CD/DVD drive for the " "bootloader to launch the installation automatically after rebooting the " "computer. If that does not happen you may need to reconfigure your BIOS or " "press one key that will offer you to choose the peripheral from which the " "computer will boot." msgstr "" "可以使用烧录的镜像（CD-ROM，DVD-ROM等）直接引导 Mageia。只需将媒体插入到光盘" "驱动器中，然后重启电脑即可。若没有出现引导画面，则需要手动修改 BIOS 配置，或" "者在电脑启动时按下特定按键来选择引导设备。" #. type: Content of: <section><section><section><para> #: en/bootLive.xml:23 msgid "" "According to which hardware you have, and how it is configured, you get " "either one or another of the two screens below." msgstr "根据你所使用的硬件以及配置的不同，接下来还有一些安装选项需要设置。" #. type: Content of: <section><section><section><info><title> #: en/bootLive.xml:29 msgid "From a USB device" msgstr "自 USB 设备" #. type: Content of: <section><section><section><para> #: en/bootLive.xml:32 msgid "" "You can boot from the USB device on which you dumped your image ISO. " "According to your BIOS settings, the computer boots perhaps directly on the " "USB device already plugged in a port. If that does not happen you may need " "to reconfigure your BIOS or press one key that will offer you to choose the " "peripheral from which the computer will boot." msgstr "" "你可以通过写有镜像 ISO 的 USB 设备来引导 Mageia。根据 BIOS 设置不同，电脑可能" "直接从插入的 USB 设备上启动，也可能跳过 USB 设备。在后一种情况下，你需要手动" "修改 BIOS 配置，或在电脑启动时按下特定按键来选择引导设备。" #. type: Content of: <section><section><info><title> #: en/bootLive.xml:43 msgid "In BIOS/CSM/Legacy mode" msgstr "在 BIOS/CSM/Legacy 模式下" #. type: Content of: <section><section><mediaobject> #: en/bootLive.xml:47 msgid "<imageobject> <imagedata fileref=\"live-bootCSM.png\"/> </imageobject>" msgstr "<imageobject> <imagedata fileref=\"live-bootCSM.png\"/> </imageobject>" #. type: Content of: <section><section><mediaobject><caption><para> #: en/bootLive.xml:52 msgid "First screen while booting in BIOS mode" msgstr "在 BIOS 模式下引导时的第一个画面" #. type: Content of: <section><section><para> #: en/bootLive.xml:56 msgid "In the middle menu, you have the choice between three actions:" msgstr "中间的菜单提供了三个可选操作：" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:61 msgid "" "Boot Mageia: That means Mageia 5 will start from the connected media (CD/DVD " "or USB stick) without writing anything on the disk, so expect a very slow " "system. Once the boot is done, you can proceed to the installation on a hard " "disk." msgstr "" "Boot Mageia：将从媒体（CD/DVD 或 U 盘）直接启动 Mageia 5，并且不会向硬盘写入" "任何数据，所以系统可能运行较慢。引导完成后，即可将系统安装到硬盘。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:68 msgid "" "Install Mageia: This choice will directly install Mageia on a hard disk." msgstr "Install Mageia：将 Mageia 直接安装到硬盘。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:73 msgid "" "Boot from hard disk: This choice allows to boot from hard disk, as usual, " "when no media (CD/DVD or USB stick) is connected. (not working with Mageia " "5)." msgstr "" "Boot from hard disk：从硬盘引导，和不使用引导媒体的情况相同（即不启动 Mageia " "5）。" #. type: Content of: <section><section><para> #: en/bootLive.xml:79 msgid "In the bottom menu, are the Boot Options:" msgstr "底部菜单中提供了引导选项：" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:83 msgid "" "F1 - Help. Explain the options \"splash\", \"apm\", \"acpi\" and \"Ide\"" msgstr "F1 - 帮助。说明”splash“、”apm“、”acpi“、”ide“等选项。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:88 msgid "F2 - Language. Choose the display language of the screens." msgstr "F2 - 语言。选择用于显示的语言。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:93 msgid "F3 - Screen resolution. Choose between text, 640x400, 800x600, 1024x728" msgstr "F3 -屏幕分辨率。选择 640x400、800x600、1024x728 或纯文本模式。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:98 msgid "" "F4 - CD-Rom. CD-Rom or Other. Normally, the installation is performed from " "the inserted installation medium. Here, select other sources, like FTP or " "NFS servers. If the installation is carried out in a network with an SLP " "server, select one of the installation sources available on the server with " "this option." msgstr "" "F4 - CD-Rom。CD-Rom 相关选项。一般通过插入的安装媒体来安装，但也可以选择 " "FTP、NFS 等其他安装源。如果通过网络上的 SLP 服务器来安装，请用此选项选择一个" "服务器上可用的安装源。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:106 msgid "" "F5 - Driver. Yes or No. The system is aware about the presence of an " "optional disk with a driver update and will require its insertion during " "installation process." msgstr "" "F5 - 驱动。是否使用驱动。系统将在安装过程中提醒需要使用驱动更新的磁盘，并将其" "插入。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:112 msgid "" "F6 - Kernel options. This is a way to specify options according to your " "hardware and the drivers to use." msgstr "F6 - 内核选项。用于指定与硬件和驱动相关的内核参数。" #. type: Content of: <section><section><info><title> #: en/bootLive.xml:120 msgid "In UEFI mode" msgstr "在 UEFI 模式下" #. type: Content of: <section><section><mediaobject> #: en/bootLive.xml:124 msgid "" "<imageobject> <imagedata revision=\"1\" align=\"center\" fileref=\"live-" "bootUEFI.png\" format=\"PNG\" xml:id=\"bootUEFI-im1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata revision=\"1\" align=\"center\" fileref=\"live-" "bootUEFI.png\" format=\"PNG\" xml:id=\"bootUEFI-im1\"/> </imageobject>" #. type: Content of: <section><section><mediaobject><caption><para> #: en/bootLive.xml:129 msgid "First screen while booting on UEFI system from disk" msgstr "在 UEFI 模式下引导时的第一个画面" #. type: Content of: <section><section><para> #: en/bootLive.xml:133 msgid "" "You have only the choice to run Mageia in Live mode (first choice) or to " "process the installation (second choice)." msgstr "" "你可以选择以 Live 模式运行 Mageia（第一个选项）或者直接进行安装（第二个选" "项）。" #. type: Content of: <section><section><para> #: en/bootLive.xml:135 msgid "" "If you booted from a USB stick, you get two supplemental lines which are a " "duplicata of the previous lines suffixed with \"USB\". You have to choose " "them." msgstr "若从 U 盘引导，除了以”uSB“结尾的行以外，还会有额外的两行供选择。" #. type: Content of: <section><section><para> #: en/bootLive.xml:139 msgid "" "In each case, the first steps will be the same to choose language, timezone " "and keyboard, then the processes differ, with <link linkend=\"testing" "\">additional steps in Live mode</link>." msgstr "" "在不同选项中，都需要先选择语言、时区和键盘布局，然后 <link linkend=\"testing" "\">Live 模式下会有额外的步骤</link>。" #. type: Content of: <section><info><title> #: en/chooseDesktop.xml:5 msgid "Desktop Selection" msgstr "桌面环境选择" #. type: Content of: <section><para> #: en/chooseDesktop.xml:11 msgid "" "Depending on your selection here, you may be offered further screens to fine " "tune your choice." msgstr "根据所选项不同，随后会出现不同的窗口用于详细设置。" #. type: Content of: <section><para> #: en/chooseDesktop.xml:13 msgid "" "After the selection step(s), you will see a slide show during package " "installation. The slide show can be disabled by pressing the " "<guilabel>Details</guilabel> button" msgstr "" "在选择完成之后，将会在安装软件包时展示一系列幻灯片。可以按 <guilabel>详细</" "guilabel> 按钮来关闭幻灯片显示。" #. type: Content of: <section><mediaobject> #: en/chooseDesktop.xml:20 msgid "" "<imageobject> <imagedata fileref=\"dx2-chooseDesktop.png\" align=\"center\" " "format=\"PNG\" ></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/chooseDesktop.xml:26 msgid "" "Choose whether you prefer to use the <application>KDE</application> or " "<application>Gnome</application> desktop environment. Both come with a full " "set of useful applications and tools. Tick <guilabel>Custom</guilabel> if " "you want to use neither or both, or if you want something other than the " "default software choices for these desktop environments. The " "<application>LXDE</application> desktop is lighter than the previous two, " "sporting less eye candy and fewer packages installed by default." msgstr "" #. type: Content of: <section><info><title> #: en/choosePackageGroups.xml:4 msgid "Package Group Selection" msgstr "选择软件包组" #. 2012-12-26 marja - exported this section from choosePackages.xml to start a new page #. type: Content of: <section><mediaobject> #: en/choosePackageGroups.xml:10 msgid "" "<imageobject> <imagedata fileref=\"dx2-choosePackageGroups.png\" align=" "\"center\" format=\"PNG\" ></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/choosePackageGroups.xml:16 msgid "" "Packages have been sorted into groups, to make choosing what you need on " "your system a lot easier. The groups are fairly self explanatory, however " "more information about the content of each is available in tool-tips which " "become visible as the mouse is hovered over them." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:23 msgid "Workstation." msgstr "工作区" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:27 msgid "Server." msgstr "服务器。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:31 msgid "Graphical Environment." msgstr "图形界面环境" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:35 msgid "" "Individual Package Selection: You can use this option to manually add or " "remove packages." msgstr "" #. type: Content of: <section><para> #: en/choosePackageGroups.xml:39 msgid "" "Read <xref linkend=\"minimal-install\"></xref> for instructions on how to do " "a minimal install (without or with X & IceWM)." msgstr "" #. type: Content of: <section><info><title> #: en/choosePackagesTree.xml:4 msgid "Choose Individual Packages" msgstr "选择单个软件包" #. 2012-12-26 marja - exported this section from choosePackages.xml to start a new page #. type: Content of: <section><mediaobject> #: en/choosePackagesTree.xml:11 msgid "" "<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" align=" "\"center\" format=\"PNG\" ></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/choosePackagesTree.xml:17 msgid "" "Here you can add or remove any extra packages to customise your installation." msgstr "" #. type: Content of: <section><para> #: en/choosePackagesTree.xml:20 msgid "" "After having made your choice, you can click on the <guibutton>floppy icon</" "guibutton> at the bottom of the page to save your choice of packages (saving " "to a USB key works, too). You can then use this file to install the same " "packages on another system, by pressing the same button during install and " "choosing to load it." msgstr "" #. type: Content of: <section><info><title> #: en/configureServices.xml:12 msgid "Configure your Services" msgstr "配置服务" #. 2012-12-25 marja - moved this section out of misc-params.xml #. 2013-05-05 marja - added screenshot #. type: Content of: <section><mediaobject> #: en/configureServices.xml:21 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices.png" "\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></" "imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/configureServices.xml:27 msgid "" "Here you can set which services should (not) start when you boot your system." msgstr "" #. type: Content of: <section><para> #: en/configureServices.xml:30 msgid "" "There are four groups, click on the triangle before a group to expand it and " "see all services in it." msgstr "" #. type: Content of: <section><para> #: en/configureServices.xml:34 msgid "The setting DrakX chose are usually good." msgstr "DrakX自动选择的设置通常可正常工作。" #. type: Content of: <section><para> #: en/configureServices.xml:37 msgid "" "If you highlight a service, some information about it is shown in the info " "box below." msgstr "" #. type: Content of: <section><para> #: en/configureServices.xml:41 msgid "Only change things when you know very well what you are doing." msgstr "只有在您完全了解您的行为的风险后再作出改动。" #. type: Content of: <section><info><title> #: en/configureTimezoneUTC.xml:3 msgid "Configure your Timezone" msgstr "配置时区" #. 2012-12-25 marja - moved this part out of misc-params.xml #. 2013-05-05 marja - added screenshot #. type: Content of: <section><mediaobject> #: en/configureTimezoneUTC.xml:11 msgid "" "<imageobject condition=\"classical\"> <imagedata xml:id=" "\"configureTimezoneUTC-im1\" revision=\"1\" fileref=\"dx2-" "configureTimezoneUTC.png\" align=\"center\" format=\"PNG\"/> </imageobject> " "<imageobject> <imagedata fileref=\"live-timeZone.png\" condition=\"live\" " "format=\"PNG\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/configureTimezoneUTC.xml:20 msgid "" "Choose your time zone by choosing your country or a city close to you in the " "same time zone." msgstr "" #. type: Content of: <section><para> #: en/configureTimezoneUTC.xml:24 msgid "" "In next screen you can choose to set your hardware clock to local time or to " "GMT, also known as UTC." msgstr "" #. type: Content of: <section><note><para> #: en/configureTimezoneUTC.xml:29 msgid "" "If you have more than one operating system on your computer, make sure they " "are all set to local time, or all to UTC/GMT." msgstr "" #. type: Content of: <section><info><title> #: en/configureX_card_list.xml:11 msgid "Choose an X Server (Configure your Graphic Card)" msgstr "选择一个X服务器(配置您的显示卡)" #. type: Content of: <section><mediaobject> #: en/configureX_card_list.xml:16 msgid "" "<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id=" "\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" format=" "\"PNG\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:21 msgid "" "DrakX has a very comprehensive database of video cards and will usually " "correctly identify your video device." msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:24 msgid "" "If the installer has not correctly detected your graphic card and you know " "which one you have, you can select it from the tree by:" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_card_list.xml:27 en/configureX_monitor.xml:69 msgid "vendor" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_card_list.xml:31 msgid "then the name of your card" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_card_list.xml:35 msgid "and the type of card" msgstr "卡的类型" #. type: Content of: <section><para> #: en/configureX_card_list.xml:39 msgid "" "If you cannot find your card in the vendor lists (because it's not yet in " "the database or it's an older card) you may find a suitable driver in the " "Xorg category" msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:43 msgid "" "The Xorg listing provides more than 40 generic and open source video card " "drivers. If you still can't find a named driver for your card there is the " "option of using the vesa driver which provides basic capabilities." msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:48 msgid "" "Be aware that if you select an incompatible driver you may only have access " "to the Commandline Interface." msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:51 msgid "" "Some video card manufacturers provide proprietary drivers for Linux which " "may only be available in the Nonfree repository and in some cases only from " "the card manufacturers' websites." msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:55 msgid "" "The Nonfree repository needs to be explicitly enabled to access them. If " "you didn't select it previously, you should do this after your first reboot." msgstr "" #. type: Content of: <section><info><title> #: en/configureX_chooser.xml:4 msgid "Graphic Card and Monitor Configuration" msgstr "显示卡和显示器配置" #. Marja 2012-08-10, copied setupX.xml to this file and replaced all "setupX" in the code by "configureX_chooser", because this is the correct filename for this page #. type: Content of: <section><mediaobject> #: en/configureX_chooser.xml:11 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureX_chooser.png" "\" align=\"center\" format=\"PNG\" xml:id=\"configureX_chooser-im1\"> </" "imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/configureX_chooser.xml:18 msgid "" "No matter which graphical environment (also known as desktop environment) " "you chose for this install of <application>Mageia</application>, they are " "all based on a graphical user interface system called <acronym>X Window " "System</acronym>, or simply <acronym>X</acronym>. So in order for " "<acronym>KDE</acronym>, <acronym>Gnome</acronym>, <acronym>LXDE</acronym> or " "any other graphical environment to work well, the following <acronym>X</" "acronym> settings need to be correct. Choose the correct settings if you can " "see that <application>DrakX</application> didn't make a choice, or if you " "think the choice is incorrect." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:31 msgid "" "<emphasis><guibutton>Graphic card</guibutton></emphasis>: Choose your card " "from the list if needed." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:37 msgid "" "<emphasis><guibutton>Monitor</guibutton></emphasis>: You can choose " "<guilabel>Plug'n Play</guilabel> when applicable, or choose your monitor " "from the <guilabel>Vendor</guilabel> or <guilabel>Generic</guilabel> list. " "Choose <guilabel>Custom</guilabel> if you prefer to manually set the " "horizontal and vertical refresh rates of your monitor." msgstr "" #. type: Content of: <section><itemizedlist><listitem><warning><para> #: en/configureX_chooser.xml:45 msgid "Incorrect refresh rates may damage your monitor" msgstr "不正确的刷新率可能会损坏显示器" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:51 msgid "" "<emphasis><guibutton>Resolution</guibutton></emphasis>: Set the desired " "resolution and color depth of your monitor here." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:56 msgid "" "<emphasis><guibutton>Test</guibutton></emphasis>: The test button does not " "always appear during install. If the button is there, you can control your " "settings by pressing it. If you see a question asking you whether your " "settings are correct, you can answer \"yes\", and the settings will be kept. " "If you don't see anything, you'll return to the configuration screen and be " "able to reconfigure everything until the test is good. <emphasis>Make sure " "your settings are on the safe side if the test button isn't available</" "emphasis>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:67 msgid "" "<emphasis><guibutton>Options</guibutton></emphasis>: Here you can choose to " "enable or disable various options." msgstr "" #. type: Content of: <section><info><title> #: en/configureX_monitor.xml:18 msgid "Choosing your Monitor" msgstr "选择您的显示器" #. type: Content of: <section><para> #: en/configureX_monitor.xml:21 msgid "" "DrakX has a very comprehensive database of monitors and will usually " "correctly identify yours." msgstr "" #. type: Content of: <section><warning><para> #: en/configureX_monitor.xml:26 msgid "" "<emphasis>Selecting a monitor with different characteristics could damage " "your monitor or video hardware. Please don't try something without knowing " "what you are doing.</emphasis> If in doubt you should consult your monitor " "documentation" msgstr "" #. type: Content of: <section><mediaobject> #: en/configureX_monitor.xml:34 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor." "png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:42 msgid "<emphasis>Custom</emphasis>" msgstr "<emphasis>自定义</emphasis>" #. type: Content of: <section><para> #: en/configureX_monitor.xml:44 msgid "" "This option allows you to set two critical parameters, the vertical refresh " "rate and the horizontal sync rate. Vertical refresh determines how often the " "screen is refreshed and horizontal sync is the rate at which scan lines are " "displayed." msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:49 msgid "" "It is <emphasis>VERY IMPORTANT</emphasis> that you do not specify a monitor " "type with a sync range that is beyond the capabilities of your monitor: you " "may damage your monitor. If in doubt, choose a conservative setting and " "consult your monitor documentation." msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:55 msgid "<emphasis>Plug 'n Play</emphasis>" msgstr "<emphasis>即插即用</emphasis>" #. type: Content of: <section><para> #: en/configureX_monitor.xml:58 msgid "" "This is the default option and tries to determine the monitor type from the " "monitor database." msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:63 msgid "<emphasis>Vendor</emphasis>" msgstr "<emphasis>供应商</emphasis>" #. type: Content of: <section><para> #: en/configureX_monitor.xml:65 msgid "" "If the installer has not correctly detected your monitor and you know which " "one you have, you can select it from the tree by selecting:" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_monitor.xml:73 msgid "the monitor manufacturers name" msgstr "显示器制造商名称" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_monitor.xml:77 msgid "the monitor description" msgstr "显示器描述" #. type: Content of: <section><para> #: en/configureX_monitor.xml:82 msgid "<emphasis>Generic</emphasis>" msgstr "<emphasis>通用</emphasis>" #. type: Content of: <section><para> #: en/configureX_monitor.xml:84 msgid "" "selecting this group displays nearly 30 display configurations such as " "1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is " "often a good monitor selection group if you need to use the Vesa card driver " "when your video hardware cannot be determined automatically. Once again it " "may be wise to be conservative in your selections." msgstr "" #. type: Content of: <section><info><title> #: en/diskdrake.xml:20 msgid "Custom disk partitioning with DiskDrake" msgstr "" #. type: Content of: <section><mediaobject> #: en/diskdrake.xml:25 msgid "" "<imageobject condition='classical'> <imagedata fileref=\"dx2-diskdrake.png\" " "align=\"center\"/> </imageobject> <imageobject condition='live' > <imagedata " "fileref=\"live-diskdrake.png\" align=\"center\"/> </imageobject>" msgstr "" #. type: Content of: <section><warning><para> #: en/diskdrake.xml:34 msgid "" "If you wish to use encryption on your <literal>/</literal> partition you " "must ensure that you have a separate <literal>/boot</literal> partition. The " "encryption option for the <literal>/boot</literal> partition must NOT be " "set, otherwise your system will be unbootable." msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:41 msgid "" "Adjust the layout of your disk(s) here. You can remove or create " "partitions, change the filesystem of a partition or change its size and even " "view what is in them before you start." msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:46 msgid "" "There is a tab for every detected hard disk or other storage device, like an " "USB key. For example sda, sdb and sdc if there are three of them." msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:50 msgid "" "Push <guibutton>Clear all</guibutton> to wipe all partitions on the selected " "storage device" msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:53 msgid "" "For all other actions: click on the desired partition first. Then view it, " "or choose a filesystem and a mount point, resize it or wipe it." msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:57 msgid "Continue until you adjusted everything to your wishes." msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:60 msgid "Click <guibutton>Done</guibutton> when you're ready." msgstr " 准备好时点击<guibutton>完成</guibutton>按钮。" #. type: Content of: <section><note><para> #: en/diskdrake.xml:64 msgid "" "If you are installing Mageia on an UEFI system, check that an ESP (EFI " "System Partition) is present and correctly mounted on /boot/EFI (see above)" msgstr "" #. type: Content of: <section><note><para><mediaobject> #: en/diskdrake.xml:69 msgid "" "<imageobject> <imagedata fileref=\"dx2-diskdrake2.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><figure> #: en/diskdrake.xml:68 en/installer.xml:41 msgid "<placeholder type=\"mediaobject\" id=\"0\"/>" msgstr "" #. type: Content of: <section><info><title> #: en/doPartitionDisks.xml:7 msgid "Partitioning" msgstr "分区" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:10 msgid "" "In this screen you can see the content of your hard drive(s) and see the " "solutions the DrakX partitioning wizard found for where to install " "<application>Mageia</application>." msgstr "" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:15 msgid "" "The options available from the list below will vary depending on your " "particular hard drive(s) layout and content." msgstr "" #. type: Content of: <section><mediaobject> #: en/doPartitionDisks.xml:20 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-doPartitionDisks.png" "\"/> </imageobject>" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:27 msgid "Use Existing Partitions" msgstr "使用现存的分区" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:30 msgid "" "If this option is available, then existing Linux compatible partitions have " "been found and may be used for the installation." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:36 msgid "Use Free Space" msgstr "使用空闲空间" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:38 msgid "" "If you have unused space on your hard drive then this option will use it for " "your new Mageia installation." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:44 msgid "Use Free Space on a Windows Partition" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:47 msgid "" "If you have unused space on an existing Windows partition, the installer may " "offer to use it." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:51 msgid "" "This can be a useful way of making room for your new Mageia installation, " "but is a risky operation so you should make sure you have backed up all " "important files!" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:56 msgid "" "Note that this involves shrinking the size of the Windows partition. The " "partition must be \"clean\", meaning that Windows must have closed down " "correctly the last time it was used. It must also have been defragmented, " "although this is not a guarantee that all files in the partition have been " "moved out of the area that is about to be used. It is highly recommended to " "back up your personal files." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:64 msgid "" "With this option, the installer displays the remaining Windows partition in " "light blue and the future Mageia partition in dark blue with their intended " "sizes just under. You have the possibility to adapt these sizes by clicking " "and dragging the gap between both partitions. See the screen-shot below." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><mediaobject> #: en/doPartitionDisks.xml:71 msgid "" "<imageobject> <imagedata fileref=\"dx2-doPartitionDisks2.png\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:78 msgid "Erase and use Entire Disk." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:81 msgid "This option will use the complete drive for Mageia." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:84 msgid "Note! This will erase ALL data on the selected hard drive. Take care!" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:87 msgid "" "If you intend to use part of the disk for something else, or you already " "have data on the drive that you are not prepared to lose, then do not use " "this option." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:94 msgid "Custom" msgstr "自定义" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:96 msgid "" "This gives you complete control over the placing of the installation on your " "hard drive(s)." msgstr "" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:102 msgid "<emphasis role=\"bold\">Partitions sizing:</emphasis>" msgstr "" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:104 msgid "" "The installer will share the available place out according to the following " "rules:" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:109 msgid "" "If the total available place is lower than 50 GB, only one partition is " "created for /, there is no separate partition for /home." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:115 msgid "" "If the total available place is over 50 GB, then three partitions are created" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:120 msgid "" "6/19 of the total available place is allocated to / with a maximum of 50 GB" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:125 msgid "1/19 is allocated to swap with a maximum of 4 GB" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:129 msgid "the rest (at least 12/19) is allocated to /home" msgstr "" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:135 msgid "" "That means that from 160 GB and over of available place, the installer will " "create three partitions: 50 GB for /, 4 GB for swap and the rest for /home." msgstr "" #. type: Content of: <section><note><para> #: en/doPartitionDisks.xml:140 msgid "" "If you are using an UEFI system, the ESP (EFI System Partition) will be " "automatically detected, or created if it does not exist yet, and mounted on /" "boot/EFI. The \"Custom\" option is the only one that allows to check it has " "been correctly done" msgstr "" #. type: Content of: <section><warning><para> #: en/doPartitionDisks.xml:147 msgid "" "Some newer drives are now using 4096 byte logical sectors, instead of the " "previous standard of 512 byte logical sectors. Due to lack of available " "hardware, the partitioning tool used in the installer has not been tested " "with such a drive. Also some ssd drives now use an erase block size over 1 " "MB. We suggest to pre-partition the drive, using an alternative partitioning " "tool like gparted, if you own such a device, and to use the following " "settings:" msgstr "" #. type: Content of: <section><warning><para> #: en/doPartitionDisks.xml:155 msgid "\"Align to\" \"MiB\"" msgstr "" #. type: Content of: <section><warning><para> #: en/doPartitionDisks.xml:157 msgid "\"Free space preceding (MiB)\" \"2\"" msgstr "" #. type: Content of: <section><warning><para> #: en/doPartitionDisks.xml:159 msgid "" "Also make sure all partitions are created with an even number of megabytes." msgstr "" #. type: Content of: <article><info><title> #: en/DrakLive-cover.xml:4 en/DrakLive-cover.xml:30 en/DrakLive.xml:3 msgid "Installation from LIVE medium" msgstr "" #. type: Content of: <book><info> #: en/DrakLive-cover.xml:5 en/DrakX-cover.xml:5 msgid "<publisher> <publishername>Mageia.org</publishername> </publisher>" msgstr "" #. type: Content of: <book><info><revhistory><revision><date> #: en/DrakLive-cover.xml:10 msgid "January 2015" msgstr "" #. type: Content of: <book><info><revhistory><revision><revremark> #: en/DrakLive-cover.xml:11 msgid "Mageia 5" msgstr "Mageia 5" #. type: Content of: <book><info><cover><para> #: en/DrakLive-cover.xml:15 en/DrakX-cover.xml:15 msgid "The Official Documentation for Mageia" msgstr "" #. type: Content of: <book><info><cover><mediaobject> #: en/DrakLive-cover.xml:17 en/DrakX-cover.xml:17 msgid "<imageobject> <imagedata fileref=\"mageia-2013.png\"/> </imageobject>" msgstr "" #. type: Content of: <article><info><cover><para> #: en/DrakLive-cover.xml:21 en/DrakLive.xml:12 en/DrakX-cover.xml:21 #: en/DrakX.xml:12 msgid "" "The texts and screenshots in this manual are available under the CC BY-SA " "3.0 license <link ns6:href=\"http://creativecommons.org/licenses/by-sa/3.0/" "\">http://creativecommons.org/licenses/by-sa/3.0/</link>." msgstr "" #. type: Content of: <article><info><cover><para> #: en/DrakLive-cover.xml:24 en/DrakLive.xml:15 en/DrakX-cover.xml:24 #: en/DrakX.xml:16 msgid "" "This manual was produced with the help of the <link ns6:href=\"http://www." "calenco.com\">Calenco CMS</link> developed by <link ns6:href=\"http://www." "neodoc.biz\">NeoDoc</link>." msgstr "" #. type: Content of: <article><info><cover><para> #: en/DrakLive-cover.xml:26 en/DrakLive.xml:17 en/DrakX-cover.xml:26 #: en/DrakX.xml:18 msgid "" "It was written by volunteers in their free time. Please contact <link ns6:" "href=\"https://wiki.mageia.org/en/Documentation_team\">Documentation Team</" "link>, if you would like to help improve this manual." msgstr "" #. type: Content of: <article><info><cover><para><note> #: en/DrakLive-cover.xml:31 en/DrakLive.xml:6 en/DrakX-cover.xml:37 #: en/DrakX.xml:6 msgid "<note>" msgstr "<note>" #. type: Content of: <article><info><cover><para><note><para> #: en/DrakLive-cover.xml:32 en/DrakLive.xml:7 en/DrakX-cover.xml:38 #: en/DrakX.xml:7 msgid "" "No one will see all the installer screens that you see in this manual. Which " "screens you will see, depends on your hardware and the choices you make " "while installing." msgstr "" "其他人不一定能在此手册中看到你所看到的安装页面。这取决于你的硬件规格以及安装" "时的选项。" #. type: Content of: <article><info><cover><para> #: en/DrakLive-cover.xml:35 en/DrakLive.xml:10 en/DrakX-cover.xml:41 #: en/DrakX.xml:10 msgid "</note>" msgstr "</note>" #. type: Content of: <article><info><title> #: en/DrakX-cover.xml:4 en/DrakX-cover.xml:36 en/DrakX.xml:3 msgid "Installation with DrakX" msgstr "用 DrakX 安装" #. type: Content of: <book><info><revhistory><revision><date> #: en/DrakX-cover.xml:10 msgid "February 2014" msgstr "2014 年二月" #. type: Content of: <book><info><revhistory><revision><revremark> #: en/DrakX-cover.xml:11 msgid "Mageia 4" msgstr "Mageia 4" #. type: Content of: <section><info><title> #: en/exitInstall.xml:4 msgid "Congratulations" msgstr "恭喜" #. Started by marja on 2012 03 29 #. NEEDS TO BE WRITTEN AND THEN REVIEWED! #. marja - 2012-04-24 added screenshot and text #. same day, added "s" to "sytems" #. type: Content of: <section><mediaobject> #: en/exitInstall.xml:14 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-exitInstall.png\" " "format=\"PNG\" align=\"center\" xml:id=\"exitInstall-im1\"> </imagedata> </" "imageobject>" msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:21 msgid "" "You have finished installing and configuring <application>Mageia</" "application> and it is now safe to remove the installation medium and reboot " "your computer." msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:25 msgid "" "After reboot, in the bootloader screen, you can choose between the operating " "systems on your computer (if you have more than one)." msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:28 msgid "" "If you didn't adjust the settings for the bootloader, your Mageia install " "will be automatically selected and started." msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:31 msgid "Enjoy!" msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:33 msgid "" "Visit www.mageia.org if you have any questions or want to contribute to " "Mageia" msgstr "" #. type: Content of: <section><info><title> #: en/formatPartitions.xml:4 msgid "Formatting" msgstr "" #. Made by marja on 2012 03 29 #. NEEDS TO BE REVIEWED! #. marja 2012-04-24 added screenshot #. marja 2012-04-24 added emphasis tags in formatPartitions-pa1 #. type: Content of: <section><mediaobject> #: en/formatPartitions.xml:18 msgid "" "<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-" "formatPartitions.png\" format=\"PNG\" align=\"center\" xml:id=" "\"formatPartitions-im1\"> </imagedata> </imageobject> <imageobject " "condition='live'> <imagedata revision=\"1\" fileref=\"live-formatPartitions." "png\" format=\"PNG\" align=\"center\" xml:id=\"live-formatPartitions-im1\"> " "</imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/formatPartitions.xml:30 msgid "" "Here you can choose which partition(s) you wish to format. Any data on " "partitions <emphasis>not</emphasis> marked for formatting will be saved." msgstr "" #. type: Content of: <section><para> #: en/formatPartitions.xml:34 msgid "Usually at least the partitions DrakX selected, need to be formatted" msgstr "" #. type: Content of: <section><para> #: en/formatPartitions.xml:37 msgid "" "Click on <guibutton>Advanced</guibutton> to choose partitions you want to " "check for so called <emphasis>bad blocks</emphasis>" msgstr "" #. type: Content of: <section><tip><para> #: en/formatPartitions.xml:42 msgid "" "If you're not sure you have made the right choice, you can click on " "<guibutton>Previous</guibutton>, again on <guibutton>Previous</guibutton> " "and then on <guibutton>Custom</guibutton> to get back to the main screen. " "In that screen you can choose to view what is in your partitions." msgstr "" #. type: Content of: <section><para> #: en/formatPartitions.xml:49 msgid "" "When you are confident about the selection, click on <guibutton>Next</" "guibutton> to continue." msgstr "" #. type: Content of: <section><info><title> #: en/installer.xml:17 msgid "DrakX, the Mageia Installer" msgstr "" #. type: Content of: <section><para> #: en/installer.xml:20 msgid "" "Whether you are new to GNU-Linux or an experienced user, the Mageia " "Installer is designed to help make your installation or upgrade as easy as " "possible." msgstr "" #. type: Content of: <section><para> #: en/installer.xml:28 msgid "" "The initial menu screen has various options, however the default one will " "start the installer, which will normally be all that you will need." msgstr "" #. type: Content of: <section><figure><info><title> #: en/installer.xml:34 msgid "Installation Welcome Screen" msgstr "" #. type: Content of: <section><figure> #: en/installer.xml:33 msgid "<placeholder type=\"info\" id=\"0\"/>" msgstr "" #. type: Content of: <section><figure><para> #: en/installer.xml:37 msgid "" "Here are the default welcome screens when using a Mageia DVD, The first one " "with a legacy system and the second one with an UEFI system:" msgstr "" #. type: Content of: <section><figure><mediaobject> #: en/installer.xml:42 msgid "" "<imageobject> <imagedata xml:id=\"BId-drakx-intro-im1\" revision=\"1\" align=" "\"center\" format=\"PNG\" fileref=\"../dx-welcome.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><mediaobject> #: en/installer.xml:49 msgid "" "<imageobject> <imagedata fileref=\"dx-welcome2.png\" align=\"center\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><para> #: en/installer.xml:54 msgid "" "From this first screen, it is possible to set some personal preferences:" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:59 msgid "" "The language (for the installation only, may be different that the chosen " "language for the system) by pressing the key F2 (Legacy mode only)" msgstr "" #. type: Content of: <section><itemizedlist><listitem><mediaobject> #: en/installer.xml:66 msgid "" "<imageobject> <imagedata fileref=\"dx-welcome-lang.png\" align=\"center\"/> " "</imageobject>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:71 msgid "Use the arrow keys to select the language and press the key Enter." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:74 msgid "" "Here is for example, the French welcome screen when using a Live DVD/CD. " "Note that the Live DVD/CD menu does not propose: <guilabel>Rescue System</" "guilabel>, <guilabel>Memory test</guilabel> and <guilabel>Hardware Detection " "Tool</guilabel>." msgstr "" #. type: Content of: <section><itemizedlist><listitem><mediaobject> #: en/installer.xml:82 msgid "" "<imageobject> <imagedata fileref=\"dx-welcome4fr.png\" align=\"center\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:91 msgid "Change the screen resolution by pressing the F3 key (Legacy mode only)." msgstr "" #. type: Content of: <section><itemizedlist><listitem><mediaobject> #: en/installer.xml:95 msgid "" "<imageobject> <imagedata fileref=\"dx-welcome5def.png\" align=\"center\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:102 msgid "" "Add some kernel options by pressing the <emphasis role=\"bold\">F6</" "emphasis> key for the legacy mode or the <emphasis role=\"bold\">e</" "emphasis> key for the UEFI mode." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:104 msgid "" "If the installation fails, then it may be necessary to try again using one " "of the extra options. The menu called by F6 displays a new line called " "<guilabel>Boot options</guilabel> and propose four entries:" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:109 msgid "- Default, it doesn't alter anything in the default options." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:112 msgid "" "- Safe Settings, priority is given to the safer options to the detriment of " "performances." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:115 msgid "" "- No ACPI (Advanced Configuration and Power Interface), power management " "isn't taken into account." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:118 msgid "" "- No Local APIC (Local Advanced Programmable Interrupt Controller), it is " "about CPU interruptions, select this option if you are asked for." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:122 msgid "" "When you select one of these entries, it modifies the default options " "displayed in the <guilabel>Boot Options</guilabel> line." msgstr "" #. type: Content of: <section><itemizedlist><listitem><note><para> #: en/installer.xml:126 msgid "" "In some Mageia releases, it may happen that the entries selected with the " "key F6 does not appear in the <guilabel>Boot Options</guilabel> line, " "however, they are really taken into account." msgstr "" #. type: Content of: <section><itemizedlist><listitem><mediaobject> #: en/installer.xml:133 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx-welcome6opt.png\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:140 msgid "Add more kernel options by pressing the key F1 (Legacy mode only)." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:143 msgid "" "Pressing F1 opens a new window with more available options. Select one with " "the arrow keys and press Enter to have more details or press the Esc key to " "go back to the welcome screen." msgstr "" #. type: Content of: <section><itemizedlist><listitem><mediaobject> #: en/installer.xml:150 msgid "" "<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\" align=\"center\"/> " "</imageobject>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installer.xml:157 msgid "" "The detailed view about the option splash. Press Esc or select " "<guilabel>Return to Boot Options</guilabel> to go back to the options list. " "These options can by added by hand in the <guilabel>Boot options</guilabel> " "line." msgstr "" #. type: Content of: <section><itemizedlist><listitem><mediaobject> #: en/installer.xml:163 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx-welcomeHelp2.png\"/> " "</imageobject>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><note><para> #: en/installer.xml:171 msgid "The help is translated in the chosen language with the F2 key." msgstr "" #. type: Content of: <section><para> #: en/installer.xml:177 msgid "" "For more information about kernel options on legacy and UEFI systems, see: " "<link ns2:href=\"https://wiki.mageia.org/en/How_to_set_up_kernel_options" "\">https://wiki.mageia.org/en/How_to_set_up_kernel_options</link>" msgstr "" #. type: Content of: <section><para> #: en/installer.xml:180 msgid "" "Here is the default welcome screen when using a Wired Network-based " "Installation CD (Boot.iso or Boot-Nonfree.iso images):" msgstr "" #. type: Content of: <section><para> #: en/installer.xml:183 msgid "" "It does not allow to change the language, the available options are " "described in the screen. For more information about using a Wired Network-" "based Installation CD, see <link ns2:href=\"https://wiki.mageia.org/en/Boot." "iso_install\">the Mageia Wiki</link>" msgstr "" #. type: Content of: <section><warning><para> #: en/installer.xml:189 msgid "The keyboard layout is the American one." msgstr "" #. type: Content of: <section><mediaobject> #: en/installer.xml:193 msgid "" "<imageobject> <imagedata revision=\"1\" xml:id=\"installer-im2\" align=" "\"center\" format=\"PNG\" fileref=\"../dx-help.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><info><title> #: en/installer.xml:200 msgid "The installation steps" msgstr "安装步骤" #. type: Content of: <section><section><para> #: en/installer.xml:203 msgid "" "The install process is divided into a number of steps, which can be followed " "on the side panel of the screen." msgstr "" #. type: Content of: <section><section><para> #: en/installer.xml:206 msgid "" "Each step has one or more screens which may also have <guibutton>Advanced</" "guibutton> buttons with extra, less commonly required, options." msgstr "" #. type: Content of: <section><section><para> #: en/installer.xml:210 msgid "" "Most screens have <guibutton>Help</guibutton> buttons which give further " "explanations about the current step." msgstr "" #. type: Content of: <section><section><note><para> #: en/installer.xml:214 msgid "" "If somewhere during install you decide to stop the installation, it is " "possible to reboot, but please think twice before you do this. Once a " "partition has been formatted or updates have started to be installed, your " "computer is no longer in the same state and rebooting it could very well " "leave you with an unusable system. If in spite of this you are very sure " "rebooting is what you want, go to a text terminal by pressing the three keys " "<guibutton>Alt Ctrl F2</guibutton> at the same time. After that, press " "<guibutton>Alt Ctrl Delete</guibutton> simultaneously to reboot." msgstr "" #. type: Content of: <section><section><info><title> #: en/installer.xml:228 msgid "Installation Problems and Possible Solutions" msgstr "安装问题和问题解决方案" #. type: Content of: <section><section><section><info><title> #: en/installer.xml:234 msgid "No Graphical Interface" msgstr "不使用图形界面" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:239 msgid "" "After the initial screen you did not reach the language selection screen. " "This can happen with some graphic cards and older systems. Try using low " "resolution by typing <code>vgalo</code> at the prompt." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:246 msgid "" "If the hardware is very old, a graphical installation may not be possible. " "In this case it is worth trying a text mode installation. To use this hit " "ESC at the first welcome screen and confirm with ENTER. You will be " "presented with a black screen with the word \"boot:\". Type \"text\" and hit " "ENTER. Now continue with the installation in text mode." msgstr "" #. type: Content of: <section><section><section><info><title> #: en/installer.xml:258 msgid "The Install Freezes" msgstr "" #. type: Content of: <section><section><section><para> #: en/installer.xml:261 msgid "" "If the system appeared to freeze during the installation, this may be a " "problem with hardware detection. In this case the automatic detection of " "hardware may be bypassed and dealt with later. To try this, type " "<code>noauto</code> at the prompt. This option may also be combined with " "other options as necessary." msgstr "" #. type: Content of: <section><section><section><info><title> #: en/installer.xml:270 msgid "RAM problem" msgstr "内存问题" #. type: Content of: <section><section><section><para> #: en/installer.xml:273 msgid "" "These will rarely be needed, but in some cases the hardware may report the " "available RAM incorrectly. To specify this manually, you can use the " "<code>mem=xxxM</code> parameter, where xxx is the correct amount of RAM. e." "g. <code>mem=256M</code> would specify 256MB of RAM." msgstr "" #. type: Content of: <section><section><section><info><title> #: en/installer.xml:281 msgid "Dynamic partitions" msgstr "" #. type: Content of: <section><section><section><para> #: en/installer.xml:284 msgid "" "If you converted your hard disk from \"basic\" format to \"dynamic\" format " "on Microsoft Windows, you must know that it is impossible to install Mageia " "on this disc. To go back to a basic disk, see the Microsoft documentation: " "<link ns2:href=\"http://msdn.microsoft.com/en-us/library/cc776315.aspx" "\">http://msdn.microsoft.com/en-us/library/cc776315.aspx</link>." msgstr "" #. type: Content of: <section><info><title> #: en/installUpdates.xml:3 msgid "Updates" msgstr "更新" #. Made by marja on 2012 03 30 #. NEEDS TO BE REVIEWED! #. marja 20120418 removed xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg"" from section tag, trying to restore correct html filename #. marja, 2012-04-24 added screenshot #. type: Content of: <section><mediaobject> #: en/installUpdates.xml:13 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png\" " "format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></imagedata> </" "imageobject>" msgstr "" #. type: Content of: <section><para> #: en/installUpdates.xml:19 msgid "" "Since this version of <application>Mageia</application> was released, some " "packages will have been updated or improved." msgstr "" #. type: Content of: <section><para> #: en/installUpdates.xml:23 msgid "" "Choose <guilabel>yes</guilabel> if you wish to download and install them, " "select <guilabel>no</guilabel> if you don't want to do this now, or if you " "aren't connected to the Internet" msgstr "" #. type: Content of: <section><para> #: en/installUpdates.xml:28 msgid "Then press <guibutton>Next</guibutton> to continue" msgstr "" #. type: Content of: <section><info><title> #: en/login.xml:3 msgid "Login screen" msgstr "" #. type: Content of: <section><mediaobject> #: en/login.xml:7 msgid "" "<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id=\"login-" "im1\" format=\"PNG\" fileref=\"live-login.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><mediaobject><caption><para> #: en/login.xml:12 msgid "KDM login screen" msgstr "" #. type: Content of: <section><para> #: en/login.xml:16 msgid "Finally, you will come to the login screen." msgstr "" #. type: Content of: <section><para> #: en/login.xml:18 msgid "" "Enter your user name and user password, and in a few seconds you will find " "yourself with a loaded KDE or GNOME desktop, depending on which live medium " "you used. You can now start using your Mageia installation." msgstr "" #. type: Content of: <section><para> #: en/login.xml:22 msgid "" "You can find another part of our documentation in <link linkend=\"https://" "wiki.mageia.org/en/Category:Documentation\">the Mageia wiki</link>." msgstr "" #. type: Content of: <section><info><title> #: en/media_selection.xml:3 msgid "Media Selection (Nonfree)" msgstr "介质选择 (Nonfree)" #. papoteur 2013-04-11 - created #. marja 2013-04-16 added screenshot + made title longer (because it was the same as for add_supplemental_media) #. marja 2013-04-16 s/in/during/ as suggested by Tristan Campbell #. marja 2013-04-17 s/xml:id="media-selection"/xml:id="media_selection"/ (html filename was wrong) #. type: Content of: <section><mediaobject> #: en/media_selection.xml:12 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png" "\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><para> #: en/media_selection.xml:18 msgid "" "Here you have the list of available repositories. Not all repositories are " "available, according to which media you use for installing. The repositories " "selection determines which packages will be available for selection during " "the next steps." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:25 msgid "" "The <emphasis>Core</emphasis> repository cannot be disabled as it contains " "the base of the distribution." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:30 msgid "" "The <emphasis>Nonfree</emphasis> repository includes packages that are free-" "of-charge, i.e. Mageia may redistribute them, but they contain closed-source " "software (hence the name - Nonfree). For example this repository includes " "nVidia and ATI graphics card proprietary drivers, firmware for various WiFi " "cards, etc." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:38 msgid "" "The <emphasis>Tainted</emphasis> repository includes packages released under " "a free license. The main criteria for placing packages in this repository is " "that they may infringe patents and copyright laws in some countries, e.g. " "Multimedia codecs needed to play various audio/video files; packages needed " "to play commercial video DVD, etc." msgstr "" #. type: Content of: <section><info><title> #: en/minimal-install.xml:12 msgid "Minimal Install" msgstr "最小安装" #. type: Content of: <section><para> #: en/minimal-install.xml:19 msgid "" "You can choose a Minimal Installation by de-selecting everything in the " "Package Group Selection screen, see <xref linkend=\"choosePackageGroups\"></" "xref>." msgstr "" #. type: Content of: <section><para> #: en/minimal-install.xml:22 msgid "" "If desired, you can additionally tick the \"Individual package selection\" " "option in the same screen." msgstr "" #. type: Content of: <section><para> #: en/minimal-install.xml:24 msgid "" "Minimal Installation is intended for those with specific uses in mind for " "their <application>Mageia</application>, such as a server or a specialised " "workstation. You will probably use this option combined with the " "\"Individual package selection\" option mentioned above, to fine-tune your " "installation, see <xref linkend=\"choosePackagesTree\"></xref>." msgstr "" #. type: Content of: <section><para> #: en/minimal-install.xml:29 msgid "" "If you choose this installation class, then the related screen will offer " "you a few useful extras to install, such as documentation and X." msgstr "" #. type: Content of: <section><para> #: en/minimal-install.xml:31 msgid "" "If selected, \"With X\" will also include IceWM as lightweight desktop " "environment." msgstr "" #. type: Content of: <section><para> #: en/minimal-install.xml:33 msgid "" "The basic documentation is provided in the form of man and info pages. It " "contains the man pages from the <link xlink:href=\"http://www.tldp.org/" "manpages/man.html\">Linux Documentation Project</link> and the <link xlink:" "href=\"http://www.gnu.org/software/coreutils/manual/\">GNU coreutils</link> " "info pages." msgstr "" #. type: Content of: <section><mediaobject> #: en/minimal-install.xml:41 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png\" " "align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></imagedata> " "</imageobject>" msgstr "" #. type: Content of: <section><info><title> #: en/misc-params.xml:3 msgid "Summary of miscellaneous parameters" msgstr "" #. Started by marja on 2012 03 31 #. NEEDS TO BE WRITTEN AND REVIEWED! #. marja - 2012 04 15 added some text, not much, unfortunately :( #. marja 2012-04-24 added screenshots #. JohnR 2012-04-25 Added text as requested by Psec :-) #. marja 2012-04-24 added 2 links to other help pages #. marja 2012-04-24 added some text in the drakxid-configureServices and #. the drakxid-miscellaneous section #. marja 2012-04-24 corrected "Magaia" in the last paragraph #. marja 2012-04-24 corrected para xml:id number in the last paragraph #. 2012-05-01 marja - added You-Cheng Hsieh's section about IBus etc. #. 2012-08-09 marja - replaced linkend="setupBootloaderBeginner" by linkend="setupBootloader" #. 2012-12-25 marja - moved configureTimezoneUTC, selectCountry, configureServices and SecurityLevel out to separate files #. type: Content of: <section><mediaobject> #: en/misc-params.xml:33 msgid "" "<imageobject> <imagedata fileref=\"dx2-summary.png\" revision=\"1\" align=" "\"center\" format=\"PNG\" xml:id=\"summary-im1\" /> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/misc-params.xml:38 msgid "" "DrakX made smart choices for the configuration of your system depending on " "the choices you made and on the hardware DrakX detected. You can check the " "settings here and change them if you want after pressing " "<guibutton>Configure</guibutton>." msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:45 msgid "System parameters" msgstr "系统参数" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:50 msgid "<guilabel>Timezone</guilabel>" msgstr "<guilabel>时区</guilabel>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:52 msgid "" "DrakX selected a time zone for you, depending on your preferred language. " "You can change it if needed. See also <xref linkend=\"configureTimezoneUTC\"/" ">" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:58 msgid "<guilabel>Country / Region</guilabel>" msgstr "<guilabel>国家/地区</guilabel>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:61 msgid "" "If you are not in the selected country, it is very important that you " "correct the setting. See <xref linkend=\"selectCountry\"/>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:67 msgid "<guilabel>Bootloader</guilabel>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:69 msgid "DrakX has made good choices for the bootloader setting." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:72 msgid "" "Do not change anything, unless you know how to configure Grub and/or Lilo" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:75 msgid "For more information, see <xref linkend=\"setupBootloader\"/>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:80 msgid "<guilabel>User management</guilabel>" msgstr "<guilabel>用户管理</guilabel>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:83 msgid "" "You can add extra users here. They will each get their own <literal>/home</" "literal> directories." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:89 msgid "<guilabel>Services</guilabel>:" msgstr "<guilabel>服务</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:91 msgid "" "System services refer to those small programs which run the background " "(daemons). This tool allows you to enable or disable certain tasks." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:95 msgid "" "You should check carefully before changing anything here - a mistake may " "prevent your computer from operating correctly." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:99 msgid "For more information, see <xref linkend=\"configureServices\"/>" msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:106 msgid "Hardware parameters" msgstr "硬件参数" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:111 msgid "<guilabel>Keyboard</guilabel>:" msgstr "<guilabel>键盘</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:113 msgid "" "This is where you setup or change your keyboard layout which will depend on " "your location, language or type of keyboard." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:119 msgid "<guilabel>Mouse</guilabel>:" msgstr "<guilabel>鼠标</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:121 msgid "" "Here you can add or configure other pointing devices, tablets, trackballs " "etc." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:126 msgid "<guilabel>Sound card</guilabel>:" msgstr "<guilabel>声卡</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:129 msgid "" "The installer uses the default driver, if there is a default one. The option " "to select a different driver is only given when there is more than one " "driver for your card, but none of them is the default one." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:136 msgid "<guilabel>Graphical interface</guilabel>:" msgstr "<guilabel>图形界面</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:139 msgid "This section allows you to configure your graphic card(s) and displays." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:142 msgid "For more information, see <xref linkend=\"configureX_chooser\"/>." msgstr "更多信息，参见 <xref linkend=\"configureX_chooser\"/>." #. type: Content of: <section><section><mediaobject> #: en/misc-params.xml:148 msgid "" "<imageobject> <imagedata xml:id=\"summaryBottom-im1\" revision=\"1\" align=" "\"center\" format=\"PNG\" fileref=\"dx2-summaryBottom.png\" /> </imageobject>" msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:156 msgid "Network and Internet parameters" msgstr "网络和 Internet 参数" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:162 msgid "<guilabel>Network</guilabel>:" msgstr "<guilabel>网络</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:164 msgid "" "You can configure your network here, but for network cards with non-free " "drivers it is better to do that after reboot, in the <application>Mageia " "Control Center</application>, if you have not yet enabled the Nonfree media " "repositories." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><warning><para> #: en/misc-params.xml:171 msgid "" "When you add a network card, do not forget to set your firewall to watch " "that interface as well." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:178 msgid "<guilabel>Proxies</guilabel>:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:180 msgid "" "A Proxy Server acts as an intermediary between your computer and the wider " "internet. This section allows you to configure your computer to utilize a " "proxy service." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:185 msgid "" "You may need to consult your systems administrator to get the parameters you " "need to enter here" msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:194 msgid "Security" msgstr "安全" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:199 msgid "<guilabel>Security Level</guilabel>:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:202 msgid "" "Here you set the Security level for your computer, in most cases the default " "setting (Standard) is adequate for general use." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:206 msgid "Check the option which best suits your usage." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:211 msgid "<guilabel>Firewall</guilabel>:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:213 msgid "" "A firewall is intended to be a barrier between your important data and the " "rascals out there on the internet who would compromise or steal it." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:217 msgid "" "Select the services that you wish to have access to your system. Your " "selections will depend on what you use your computer for." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><warning><para> #: en/misc-params.xml:222 msgid "Bear in mind that allowing everything (no firewall) may be very risky." msgstr "" #. type: Content of: <section><info><title> #: en/reboot.xml:9 msgid "Reboot" msgstr "重新启动" #. type: Content of: <section><mediaobject> #: en/reboot.xml:13 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"live-reboot.png\" format=" "\"PNG\" revision=\"1\" xml:id=\"reboot-im1\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/reboot.xml:19 msgid "" "Once the bootloader has been installed, you will be prompted to halt your " "computer, remove the live CD and restart the computer. When you restart, you " "will see a succession of download progress bars. These indicate that the " "software media are being downloaded (see Software management)." msgstr "" #. type: Content of: <section><info><title> #: en/resizeFATChoose.xml:16 msgid "" "Resize <application>Windows<superscript>®</superscript></application> " "partition" msgstr "" #. type: Content of: <section><para> #: en/resizeFATChoose.xml:20 msgid "" "You have more than one <application>Windows<superscript>®</superscript></" "application> partition. Choose which one should be made smaller to make " "space for installing <application>Mageia</application>." msgstr "" #. type: Content of: <section><info><title> #: en/securityLevel.xml:12 msgid "Security Level" msgstr "安全级别" #. 2012-12-25 marja - moved this part out of misc-params.xml" #. 2013-05-05 marja - added screenshot #. type: Content of: <section><mediaobject> #: en/securityLevel.xml:19 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" " "align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> </" "imageobject>" msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:24 msgid "You can adjust your security level here." msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:27 msgid "" "Leave the default settings as they are, if you don't know what to choose." msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:30 msgid "" "After install, it will always be possible to adjust your security settings " "in the <guilabel>Security</guilabel> part of the Mageia Control Center." msgstr "" #. type: Content of: <section><info><title> #: en/SelectAndUseISOs2.xml:5 msgid "Select and use ISOs" msgstr "" #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:9 msgid "Introduction" msgstr "简介" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:11 msgid "" "Mageia is distributed via ISO images. This page will help you to choose " "which image match your needs." msgstr "" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:14 msgid "There is two families of media:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:18 msgid "" "Classical installer: After booting the media, it will follow a process " "allowing to choose what to install and how to configure your target system. " "This give you the maximal flexibility for a customized installation, in " "particular to choose which Desktop Environment you will install." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:26 msgid "" "LIVE media: you can boot the media in a real Mageia system without " "installing it, to see what you will get after installation. The " "installation process is simpler, but you get lesser choices." msgstr "" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:33 msgid "Details are given in the next sections." msgstr "" #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:37 msgid "Media" msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:40 msgid "Definition" msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:42 msgid "" "Here, a medium (plural: media) is an ISO image file that allows you to " "install and/or update Mageia and by extension any physical support the ISO " "file is copied to." msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:46 msgid "" "You can find them <link ns4:href=\"http://www.mageia.org/en/downloads/" "\">here</link>." msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:50 msgid "Classical installation media" msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:53 en/SelectAndUseISOs2.xml:122 #: en/SelectAndUseISOs2.xml:228 msgid "Common features" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:57 msgid "These ISOs use the traditional installer called drakx." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:62 msgid "" "They are able to make a clean install or an update from previous releases." msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:69 msgid "DVD" msgstr "DVD" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:73 msgid "Different media for architecture 32 or 64 bits." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:77 msgid "" "Some tools are available in the Welcome screen: Rescue System, Memory Test, " "Hardware Detection Tool." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:82 msgid "Each DVD contains many available desktop environments and languages." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:87 msgid "" "You'll be given the choice during the installation to add non free software." msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:94 msgid "DVD dual arch" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:98 msgid "" "Both architectures are present on the same medium, the choice is made " "automatically according to the detected CPU." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:103 msgid "Uses Xfce desktop only." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:107 msgid "" "Not all languages are available. (be, bg, ca, de, en, es, fr, it, mk, pl, " "pt, ru, sv, uk) TO BE CHECKED!" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:112 msgid "It contains non free software." msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:119 msgid "Live media" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:126 msgid "" "Can be used to preview the distribution without installing it on a HDD, and " "optionally install Mageia on to your HDD." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:131 msgid "Each ISO contains only one desktop environment (KDE or GNOME)." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:136 en/SelectAndUseISOs2.xml:200 #: en/SelectAndUseISOs2.xml:218 en/SelectAndUseISOs2.xml:248 msgid "Different media for 32 or 64 bit architectures." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:140 msgid "" "<emphasis role=\"bold\">Live ISOs can only be used to create clean " "installations, they cannot be used to upgrade from previous releases.</" "emphasis>" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:146 msgid "They contain non free software." msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:152 msgid "Live CD KDE" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:156 en/SelectAndUseISOs2.xml:192 msgid "KDE desktop environment only." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:160 en/SelectAndUseISOs2.xml:178 #: en/SelectAndUseISOs2.xml:252 msgid "English language only." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:164 en/SelectAndUseISOs2.xml:182 msgid "32 bit only." msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:170 msgid "Live CD GNOME" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:174 en/SelectAndUseISOs2.xml:210 msgid "GNOME desktop environment only." msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:188 msgid "Live DVD KDE" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:196 en/SelectAndUseISOs2.xml:214 msgid "All languages are present." msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:206 msgid "Live DVD GNOME" msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:225 msgid "Boot-only CD media" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:232 msgid "" "Each one is a small image that contains no more than that which is needed to " "start the drakx installer and find drakx-installer-stage2 and other packages " "that are needed to continue and complete the install. These packages may be " "on the PC hard disk, on a local drive, on a local network or on the Internet." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:241 msgid "" "These media are very light (less than 100 MB) and are convenient when " "bandwidth is too low to download a full DVD, a PC without a DVD drive or a " "PC that can't boot from a USB stick." msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:258 msgid "boot.iso" msgstr "boot.iso" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:262 msgid "" "Contains only free software, for those people who refuse to use non-free " "software." msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:269 msgid "boot-nonfree.iso" msgstr "boot-nonfree.iso" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:273 msgid "" "Contains non-free software (mostly drivers, codecs...) for people who need " "it." msgstr "" #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:282 msgid "Downloading and Checking Media" msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:285 msgid "Downloading" msgstr "下载中" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:287 msgid "" "Once you have chosen your ISO file, you can download it using either http or " "BitTorrent. In both cases, a window gives you some information, such as the " "mirror in use and the possibility to change if the bandwidth is to low. If " "http is chosen, you may also see something like" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/SelectAndUseISOs2.xml:294 msgid "<imageobject> <imagedata fileref=\"Checking.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:299 msgid "" "md5sum and sha1sum are tools to check the ISO integrity. Use only one of " "them. Keep one of them <link linkend=\"integrity\">for further usage</link>. " "Then this window appears:" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/SelectAndUseISOs2.xml:304 msgid "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:309 msgid "Check the radio button Save File." msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:313 msgid "Checking the downloaded media integrity" msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:316 msgid "" "Both checksums are hexadecimal numbers calculated by an algorithm from the " "file to be downloaded. When you ask these algorithms to recalculate this " "number from your downloaded file, either you have the same number and your " "downloaded file is correct, or the number is different and you have a " "failure. A failure infers that you should retry the download." msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:323 msgid "Open a console, no need to be root, and:" msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:325 msgid "" "- To use md5sum, type: [sam@localhost]$ <userinput>md5sum path/to/the/image/" "file.iso</userinput>." msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:328 msgid "" "- To use sha1sum, type: [sam@localhost]$ <userinput>sha1sum path/to/the/" "image/file.iso</userinput>." msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:331 msgid "" "and compare the obtained number on your computer (you may have to wait for a " "while) with the number given by Mageia. Example:" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/SelectAndUseISOs2.xml:335 msgid "<imageobject> <imagedata fileref=\"../Md5sum.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:345 msgid "Burn or dump the ISO" msgstr "" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:347 msgid "" "The checked ISO can now be burned to a CD or DVD or dumped to a USB stick. " "These operations are not a simple copy and aim to make a boot-able medium." msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:352 msgid "Burning the ISO to a CD/DVD" msgstr "将ISO文件刻录到CD或DVD" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:354 msgid "" "Use whatever burner you wish but ensure the burning device is set correctly " "to <emphasis role=\"bold\">burn an image</emphasis>, burn data or files is " "not correct. There is more information in <link ns4:href=\"https://wiki." "mageia.org/en/Writing_CD_and_DVD_images\">the Mageia wiki</link>." msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:361 msgid "Dump the ISO to a USB stick" msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:363 msgid "" "All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick " "and then use it to boot and install the system." msgstr "" #. type: Content of: <section><section><section><warning><para> #: en/SelectAndUseISOs2.xml:367 msgid "" "\"dumping\" an image onto a flash device destroys any previous file-system " "on the device; any other data will be lost and the partition capacity will " "be reduced to the image size." msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:372 msgid "" "To recover the original capacity, you must redo partitioning and re-format " "the USB stick." msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:376 msgid "Using a graphical tool within Mageia" msgstr "" #. type: Content of: <section><section><section><section><para> #: en/SelectAndUseISOs2.xml:378 msgid "" "You can use a graphical tool like <link ns4:href=\"https://wiki.mageia.org/" "en/IsoDumper_Writing_ISO_images_on_USB_sticks\">IsoDumper</link>" msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:382 msgid "Using a graphical tool within Windows" msgstr "" #. type: Content of: <section><section><section><section><para> #: en/SelectAndUseISOs2.xml:384 msgid "You could try:" msgstr "" #. type: Content of: <section><section><section><section><para> #: en/SelectAndUseISOs2.xml:386 msgid "" "- <link ns4:href=\"http://rufus.akeo.ie/?locale=en_US\">Rufus</link> using " "the \"ISO image\" option;" msgstr "" #. type: Content of: <section><section><section><section><para> #: en/SelectAndUseISOs2.xml:389 msgid "" "- <link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 " "Disk Imager</link>" msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:394 msgid "Using Command line within a GNU/Linux system" msgstr "" #. type: Content of: <section><section><section><section><warning><para> #: en/SelectAndUseISOs2.xml:397 msgid "" "It is potentially *dangerous* to do this by hand. You risk to overwrite a " "disc partition if you get the device-ID wrong." msgstr "" #. type: Content of: <section><section><section><section><para> #: en/SelectAndUseISOs2.xml:401 msgid "You can also use the dd tool in a console:" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:405 msgid "Open a console" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:409 msgid "" "Become root with the command <userinput>su -</userinput> (don't forget the " "final '-' )" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject> #: en/SelectAndUseISOs2.xml:413 msgid "<imageobject> <imagedata fileref=\"../Root.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:420 msgid "" "Plug your USB stick (do not mount it, this also means do not open any " "application or file manager that could access or read it)" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:426 msgid "Enter the command <userinput>fdisk -l</userinput>" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject> #: en/SelectAndUseISOs2.xml:429 msgid "<imageobject> <imagedata fileref=\"../Fdisk.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:434 msgid "" "Alternatively, you can get the device name with the command <code>dmesg</" "code>: at end, you see the device name starting with <emphasis>sd</" "emphasis>, and <emphasis>sdd</emphasis> in this case:" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><screen> #: en/SelectAndUseISOs2.xml:439 #, no-wrap msgid "" "[72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd\n" "[72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000\n" "[72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3\n" "[72594.770536] usb 1-1: Product: Mass Storage Device\n" "[72594.770537] usb 1-1: Manufacturer: JetFlash\n" "[72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB\n" "[72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes\n" "[72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes\n" "[72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected\n" "[72594.772447] scsi host8: usb-storage 1-1:1.0\n" "[72595.963238] scsi 8:0:0:0: Direct-Access JetFlash Transcend 2GB 1100 PQ: 0 ANSI: 4\n" "[72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)\n" "[72595.964104] sd 8:0:0:0: [sdd] Write Protect is off\n" "[72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00\n" "[72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found\n" "[72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through\n" "[72595.967251] <emphasis>sdd</emphasis>: sdd1\n" "[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:460 msgid "" "Find the device name for your USB stick (by its size), for example <code>/" "dev/sdb</code> in the screenshot above, it is a 8GB USB stick." msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:466 msgid "" "Enter the command: # <userinput>dd if=path/to/the/ISO/file of=/dev/sdX " "bs=1M</userinput>" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:469 msgid "Where X=your device name eg: /dev/sdc" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:471 msgid "" "Example: # <userinput>dd if=/home/user/Downloads/Mageia-4-x86_64-DVD.iso of=/" "dev/sdb bs=1M</userinput>" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:477 msgid "Enter the command: # <userinput>sync</userinput>" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:481 msgid "Unplug your USB stick, it is done" msgstr "" #. type: Content of: <section><info><title> #: en/selectCountry.xml:13 msgid "Select your Country / Region" msgstr "" #. 2012-12-25 marja - moved this section out of misc-params #. 2013-05-05 marja - added screenshot #. type: Content of: <section><mediaobject> #: en/selectCountry.xml:21 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-selectCountry.png\" " "align=\"center\" format=\"PNG\" xml:id=\"selectCountry-im1\"></imagedata> </" "imageobject>" msgstr "" #. type: Content of: <section><para> #: en/selectCountry.xml:27 msgid "" "Select your country or region. This is important for all kinds of settings, " "like the currency and wireless regulatory domain. Setting the wrong country " "can lead to not being able to use a Wireless network." msgstr "" #. type: Content of: <section><para> #: en/selectCountry.xml:32 msgid "" "If your country isn't in the list, click the <guilabel>Other Countries</" "guilabel> button and choose your country / region there." msgstr "" #. type: Content of: <section><note><para> #: en/selectCountry.xml:37 msgid "" "If your country is only in the <guilabel>Other Countries</guilabel> list, " "after clicking <guibutton>OK</guibutton> it may seem a country from the " "first list was chosen. Please ignore this, DrakX will follow your real " "choice." msgstr "" #. type: Content of: <section><section><info><title> #: en/selectCountry.xml:46 msgid "Input method" msgstr "" #. type: Content of: <section><section><para> #: en/selectCountry.xml:49 msgid "" "In the <guilabel>Other Countries</guilabel> screen you can also select an " "input method (at the bottom of the list). Input methods allow users to input " "multilingual characters (Chinese, Japanese, Korean, etc). IBus is the " "default input method in Mageia DVDs, Africa/India and Asia/no-India Live-" "CDs. For Asian and African locales, IBus will be set as default input method " "so users should not need to configure it manually. Other input methods(SCIM, " "GCIN, HIME, etc) also provide similar functions and can be installed if you " "added HTTP/FTP media before package selection." msgstr "" #. type: Content of: <section><section><note><para> #: en/selectCountry.xml:61 msgid "" "If you missed the input method setup during installation, you can access it " "after you boot your installed system via \"Configure your Computer\" -> " "\"System\", or by running localedrake as root." msgstr "" #. type: Content of: <section><info><title> #: en/selectInstallClass.xml:21 msgid "Install or Upgrade" msgstr "新安装或升级" #. type: Content of: <section><mediaobject> #: en/selectInstallClass.xml:25 msgid "" "<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" align=" "\"center\" format=\"PNG\"></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:32 msgid "Install" msgstr "安装" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:34 msgid "" "Use this option for a fresh <application>Mageia</application> installation." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:39 msgid "Upgrade" msgstr "升级" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:41 msgid "" "If you have one or more <application>Mageia</application> installations on " "your system, the installer will allow you to upgrade one of them to the " "latest release." msgstr "" #. type: Content of: <section><itemizedlist><listitem><warning><para> #: en/selectInstallClass.xml:45 msgid "" "Only upgrading from a previous Mageia version that was <emphasis>still " "supported</emphasis> when this installer's version was released, has been " "thoroughly tested. If you want to upgrade a Mageia version that had already " "reached its End\tOf Life when this one was released, then it is better to do " "a clean install while preserving your <literal>/home</literal> partition." msgstr "" #. type: Content of: <section><note><para> #: en/selectInstallClass.xml:56 msgid "" "If during install you decide to stop the installation, it is possible to " "reboot, but please think twice before you do this. Once a partition has been " "formatted or updates have started to be installed, your computer isn't in " "the same state anymore and rebooting it could very well leave you with an " "unusable system. If in spite of that you are very sure rebooting is what you " "want, go to a text terminal by pressing the three keys <guilabel>Alt Ctrl " "F2</guilabel> at the same time. After that, press <guilabel>Alt Ctrl Delete</" "guilabel> simultaneously to reboot." msgstr "" #. type: Content of: <section><tip><para> #: en/selectInstallClass.xml:67 msgid "" "If you have discovered that you forgot to select an additional language, you " "can return from the \"Install or Upgrade\" screen to the language choice " "screen by pressing <guilabel>Alt Ctrl Home</guilabel>. Do <emphasis>not</" "emphasis> do this later in the install." msgstr "" #. type: Content of: <section><info><title> #: en/selectKeyboardLive.xml:3 msgid "Select keyboard" msgstr "" #. type: Content of: <section><mediaobject> #: en/selectKeyboardLive.xml:7 msgid "" "<imageobject> <imagedata xml:id=\"selectKeyboardLive-im1\" revision=\"1\" " "align=\"center\" format=\"PNG\" fileref=\"live-selectKeyboard.png\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><para> #: en/selectKeyboardLive.xml:12 msgid "" "You will be required to set the keyboard layout you wish to use in Mageia. " "The default one is selected according to your language and timezone " "previously selected." msgstr "" #. type: Content of: <section><info><title> #: en/selectKeyboard.xml:14 msgid "Keyboard" msgstr "键盘" #. type: Content of: <section><para> #: en/selectKeyboard.xml:17 msgid "" "DrakX selects an appropriate keyboard for your language. If no suitable " "keyboard is found it will default to a US keyboard layout." msgstr "" #. type: Content of: <section><mediaobject> #: en/selectKeyboard.xml:22 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png" "\" /> </imageobject>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:30 msgid "" "Make sure that the selection is correct or choose another keyboard layout. " "If you don't know which layout your keyboard has, look in the specifications " "that came with your system, or ask the computer vendor. There may even be a " "label on the keyboard that identifies the layout. You can also look here: " "<link xlink:href=\"http://en.wikipedia.org/wiki/Keyboard_layout\">en." "wikipedia.org/wiki/Keyboard_layout</link>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:40 msgid "" "If your keyboard isn't in the list shown, click on <guibutton>More</" "guibutton> to get a full list, and select your keyboard there." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para><warning><para> #: en/selectKeyboard.xml:45 msgid "" "After choosing a keyboard from the <guibutton>More</guibutton> dialog, " "you'll return to the first keyboard choice dialog and it will seem as though " "a keyboard from that screen was chosen. You can safely ignore this anomaly " "and continue the installation: Your keyboard is the one you chose from the " "full list." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:55 msgid "" "If you choose a keyboard based on non-Latin characters, you will see an " "extra dialog screen asking how you would prefer to switch between the Latin " "and non-Latin keyboard layouts" msgstr "" #. type: Content of: <section><info><title> #: en/selectLanguage.xml:15 msgid "Please choose a language to use" msgstr "请选择要使用的语言。" #. type: Content of: <section><para> #: en/selectLanguage.xml:18 msgid "" "Select your preferred language, by first expanding the list for your " "continent. <application>Mageia</application> will use this selection during " "the installation and for your installed system." msgstr "" #. type: Content of: <section><para> #: en/selectLanguage.xml:22 msgid "" "If it is likely that you will require several languages installed on your " "system, for yourself or other users, then you should use the " "<guibutton>Multiple languages</guibutton> button to add them now. It will be " "difficult to add extra language support after installation." msgstr "" #. type: Content of: <section><mediaobject> #: en/selectLanguage.xml:29 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-selectLanguage.png\" format=\"PNG\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata fileref=\"live-language.png\" format=\"\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><warning><para> #: en/selectLanguage.xml:39 msgid "" "Even if you choose more than one language, you must first choose one of them " "as your preferred language in the first language screen. It will also be " "marked as chosen in the multiple languages screen ." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:46 msgid "" "If your keyboard language is not the same as your preferred language, then " "it is advisable to install the language of your keyboard as well." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:52 msgid "Mageia uses UTF-8 (Unicode) support by default." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:54 msgid "" "This may be disabled in the \"multiple languages\" screen if you know that " "it is inappropriate for your language. Disabling UTF-8 applies to all " "installed languages." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:60 msgid "" "You can change the language of your system after installation in the Mageia " "Control Center -> System -> Manage localization for your system." msgstr "" #. type: Content of: <section><info><title> #: en/selectMouse.xml:4 msgid "Select mouse" msgstr "选择鼠标" #. Made by marja on 2012 04 11 #. NEEDS TO BE REVIEWED! #. adding some "real" text now that we know the page shows up in the right place #. marja 2012-04-24 adding screenshot #. type: Content of: <section><mediaobject> #: en/selectMouse.xml:16 msgid "" "<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" " "format=\"PNG\" > </imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/selectMouse.xml:23 msgid "" "If you are not happy with how your mouse responds, you can select a " "different one here." msgstr "" #. type: Content of: <section><para> #: en/selectMouse.xml:25 msgid "" "Usually, <guilabel>Universal</guilabel> - <guilabel>Any PS/2 and USB mice</" "guilabel> is a good choice." msgstr "" #. type: Content of: <section><para> #: en/selectMouse.xml:27 msgid "" "Select <guilabel>Universal</guilabel> - <guilabel>Force evdev</guilabel> to " "configure the buttons that do not work on a mouse with six or more buttons." msgstr "" #. type: Content of: <section><info><title> #: en/setupBootloaderAddEntry.xml:5 msgid "Add or Modify a Boot Menu Entry" msgstr "" #. type: Content of: <section><mediaobject> #: en/setupBootloaderAddEntry.xml:10 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-" "bootloaderConfiguration.png\" align=\"center\" format=\"PNG\" xml:id=" "\"bootloaderConfiguration-im1\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><title> #: en/setupBootloaderAddEntry.xml:16 en/setupBootloader.xml:17 msgid "With a Bios system" msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloaderAddEntry.xml:18 msgid "" "You can add an entry or modify the one you select first, by pressing the " "relevant button in the <emphasis>Bootloader Configuration</emphasis> screen " "and editing the screen that pops up on top of it." msgstr "" #. type: Content of: <section><section><note><para> #: en/setupBootloaderAddEntry.xml:23 msgid "" "If you have chosen <code>Grub 2</code> as your bootloader, you cannot use " "this tool to edit entries at this step, press 'Next'. You need to manually " "edit <code>/boot/grub2/custom.cfg</code> or use <code>grub-customizer</code> " "instead." msgstr "" #. type: Content of: <section><section><mediaobject> #: en/setupBootloaderAddEntry.xml:30 msgid "" "<imageobject> <imagedata revision=\"1\" xml:id=\"setupBootloaderAddEntry-" "im1\" align=\"center\" format=\"PNG\" fileref=\"dx2-setupBootloaderAddEntry." "png\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloaderAddEntry.xml:35 msgid "" "Some things that can be done without any risk, are changing the label of an " "entry and ticking the box to make an entry the default one." msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloaderAddEntry.xml:39 msgid "" "You can add the proper version number of an entry, or rename it completely." msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloaderAddEntry.xml:42 msgid "" "The default entry is the one the systems boots into if you don't make a " "choice while booting up." msgstr "" #. type: Content of: <section><section><warning><para> #: en/setupBootloaderAddEntry.xml:46 msgid "" "Editing other things can leave you with an unbootable system. Please don't " "just try something without knowing what you are doing." msgstr "" #. type: Content of: <section><section><title> #: en/setupBootloaderAddEntry.xml:53 en/setupBootloader.xml:109 msgid "With an UEFI system" msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloaderAddEntry.xml:55 msgid "" "In this case you are using Grub2-efi and you cannot use this tool to edit " "entries at this step. To do that you need to manually edit <code>/boot/grub2/" "custom.cfg</code> or use <code>grub-customizer</code> instead. All you can " "do here, is to choose the default entry in the drop down list." msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloaderAddEntry.xml:61 msgid "" "After a click on the <guibutton>Next</guibutton> button, another drop down " "list allows to choose the video resolution for Grub2 which is a graphical " "boot loader." msgstr "" #. type: Content of: <section><section><mediaobject> #: en/setupBootloaderAddEntry.xml:66 msgid "" "<imageobject> <imagedata fileref=\"dx2-bootloaderConfiguration2.png\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><info><title> #: en/setupBootloader.xml:7 msgid "Bootloader main options" msgstr "引导程序的主要选项" #. type: Content of: <section><mediaobject> #: en/setupBootloader.xml:11 msgid "" "<imageobject> <imagedata revision=\"1\" align=\"center\" fileref=\"dx2-" "setupBootloader.png\" xml:id=\"setupBootloader-im1\" format=\"PNG\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:19 msgid "" "If you prefer different bootloader settings to those chosen automatically by " "the installer, you can change them here." msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:23 msgid "" "You may already have another operating system on your machine, in which case " "you need to decide whether to add Mageia to your existing bootloader, or " "allow Mageia to create a new one." msgstr "" #. type: Content of: <section><section><tip><para> #: en/setupBootloader.xml:29 msgid "The Mageia graphical menus are nice :" msgstr "" #. type: Content of: <section><section><section><info><title> #: en/setupBootloader.xml:34 msgid "Using a Mageia bootloader" msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:38 msgid "" "By default, Mageia writes a new GRUB (legacy) bootloader into the MBR " "(Master Boot Record) of your first hard drive. If you already have other " "operating systems installed, Mageia attempts to add them to your new Mageia " "boot menu." msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:44 msgid "" "Mageia now also offers GRUB2 as an optional bootloader in addition to GRUB " "legacy and Lilo." msgstr "" #. type: Content of: <section><section><section><warning><para> #: en/setupBootloader.xml:48 msgid "" "Linux systems which use the GRUB2 bootloader are not currently supported by " "GRUB (legacy) and will not be recognized if the default GRUB bootloader is " "used." msgstr "" #. type: Content of: <section><section><section><warning><para> #: en/setupBootloader.xml:53 msgid "" "The best solution here is to use the GRUB2 bootloader which is available at " "the Summary page during installation." msgstr "" #. type: Content of: <section><section><section><info><title> #: en/setupBootloader.xml:61 msgid "Using an existing bootloader" msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:65 msgid "" "If you decide to use an existing bootloader then you will need to remember " "to STOP at the summary page during the installation and click the Bootloader " "<guibutton>Configure</guibutton> button, which will allow you to change the " "bootloader install location." msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:71 msgid "" "Do not select a device e.g.\"sda\", or you will overwrite your existing MBR. " "You must select the root partition that you chose during the partitioning " "phase earlier, e.g. sda7." msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:76 msgid "To be clear, sda is a device, sda7 is a partition on that device." msgstr "" #. type: Content of: <section><section><section><tip><para> #: en/setupBootloader.xml:80 msgid "" "Go to tty2 with Ctrl+Alt+F2 and type <literal>df</literal> to check where " "your <literal>/</literal> (root) partition is. Ctrl+Alt+F7 takes you back to " "the installer screen." msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:86 msgid "" "The exact procedure for adding your Mageia system to an existing bootloader " "is beyond the scope of this help, however in most cases it will involve " "running the relevant bootloader installation program which should detect and " "add it automatically. See the documentation for the operating system in " "question." msgstr "" #. type: Content of: <section><section><section><info><title> #: en/setupBootloader.xml:96 msgid "Bootloader advanced option" msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:100 msgid "" "If you have very limited disk space for the <literal>/</literal> partition " "that contains <literal>/tmp</literal>, click on <guibutton>Advanced</" "guibutton> and check the box for <guilabel>Clean /tmp at each boot</" "guilabel>. This helps to maintain some free space." msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:111 msgid "" "With an UEFI system, the user interface is slightly different as you cannot " "choose the boot loader since only Grub2-efi is available." msgstr "" #. type: Content of: <section><section><mediaobject> #: en/setupBootloader.xml:115 msgid "" "<imageobject> <imagedata fileref=\"dx2-setupBootloader2.png\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:120 msgid "" "If Mageia is the first system installed on your computer, the installer " "created an ESP (EFI System Partition) to receive the bootloader (Grub2-efi). " "If there was already UEFI operating systems previously installed on your " "computer (Windows 8 for example), the Mageia installer detected the existing " "ESP created by Windows and added grub2-efi. Although it is possible to have " "several ESPs, only one is advised and enough whatever the number of " "operating systems you have." msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:128 msgid "Don't modify the \"Boot Device\" unless really knowing what you do." msgstr "" #. type: Content of: <section><info><title> #: en/setupSCSI.xml:11 msgid "Setup SCSI" msgstr "设置SCSI" #. Made by marja on 2012 04 02 #. NEEDS TO BE REVIEWED! #. JohnR - edited 2012-03-03 #. SimonNZG has reviewed 2012-04-03 (changed editted to edited in JohnR's comment ;-) #. barjac has re-reviewed and made some minor tweaks. Revisions incremented. #. marja 2012-04-24 added screenshot #. marja 2012-04-25 replacing John's version 1.6 because that one was based on the #. Mdv doc instead of on our setupSCSI file #. type: Content of: <section><mediaobject> #: en/setupSCSI.xml:26 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" format=" "\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/setupSCSI.xml:32 msgid "" "DrakX usually detects hard disks correctly. With some older SCSI controllers " "it may be unable to determine the correct drivers to use and subsequently " "fail to recognise the drive." msgstr "" #. type: Content of: <section><para> #: en/setupSCSI.xml:36 msgid "" "If this happens, you will need to manually tell Drakx which SCSI drive(s) " "you have." msgstr "" #. type: Content of: <section><para> #: en/setupSCSI.xml:39 msgid "DrakX should then be able to configure the drive(s) correctly." msgstr "" #. type: Content of: <section><info><title> #: en/soundConfig.xml:11 msgid "Sound Configuration" msgstr "声音配置" #. Started by marja on 2013-12-07 #. type: Content of: <section><mediaobject> #: en/soundConfig.xml:17 msgid "" "<imageobject> <imagedata fileref=\"dx2-soundConfig.png\" revision=\"1\" " "format=\"PNG\" xml:id=\"soundConfig-im1\" /> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/soundConfig.xml:23 msgid "" "In this screen the name of the driver that the installer chose for your " "sound card is given, which will be the default driver if we have a default " "one." msgstr "" #. type: Content of: <section><para> #: en/soundConfig.xml:27 msgid "" "The default driver should work without problems. However, if after install " "you do encounter problems, then run <command>draksound</command> or start " "this tool via MCC (Mageia Control Center), by choosing the " "<guilabel>Hardware</guilabel> tab and clicking on <guilabel>Sound " "Configuration</guilabel> at the top right of the screen." msgstr "" #. type: Content of: <section><para> #: en/soundConfig.xml:33 msgid "" "Then, in the draksound or \"Sound Configuration\" tool screen, click on " "<guibutton>Advanced</guibutton> and then on <guibutton>Troubleshooting</" "guibutton> to find very useful advice about how to solve the problem." msgstr "" #. type: Content of: <section><section><info><title> #: en/soundConfig.xml:41 msgid "Advanced" msgstr "高级" #. type: Content of: <section><section><para> #: en/soundConfig.xml:44 msgid "" "Clicking <guibutton>Advanced</guibutton> in this screen, during install, is " "useful if there is no default driver and there are several drivers " "available, but you think the installer selected the wrong one." msgstr "" #. type: Content of: <section><section><para> #: en/soundConfig.xml:49 msgid "" "In that case you can select a different driver after clicking on " "<guibutton>Let me pick any driver</guibutton>." msgstr "" #. type: Content of: <section><info><title> #: en/takeOverHdConfirm.xml:4 msgid "Confirm hard disk to be formatted" msgstr "" #. Made by marja on 2012 04 03 #. test comment - johnr #. 2012-04-24 marja - replaced "if you are not sure you selected the correct #. hard disk." with "if you are not sure about your choice", because I'm sure I #. saw this help screen when I had only one HD #. 2013-05-05 marja added screenshot #. type: Content of: <section><mediaobject> #: en/takeOverHdConfirm.xml:19 msgid "" "<imageobject condition='live'> <imagedata fileref=\"live-takeOverHdConfirm." "png\" format=\"PNG\" align=\"center\" ></imagedata> </imageobject> " "<imageobject condition='classical'> <imagedata fileref=\"dx2-" "takeOverHdConfirm.png\" format=\"PNG\" align=\"center\" ></imagedata> </" "imageobject>" msgstr "" #. type: Content of: <section><para> #: en/takeOverHdConfirm.xml:27 msgid "" "Click on <guibutton>Previous</guibutton> if you are not sure about your " "choice." msgstr "" #. type: Content of: <section><para> #: en/takeOverHdConfirm.xml:30 msgid "" "Click on <guibutton>Next</guibutton> if you are sure and want to erase every " "partition, every operating system and all data on that hard disk." msgstr "" #. type: Content of: <section><info><title> #: en/testing.xml:9 msgid "Testing Mageia as Live system" msgstr "" #. type: Content of: <section><section><info><title> #: en/testing.xml:14 msgid "Live mode" msgstr "" #. type: Content of: <section><section><mediaobject> #: en/testing.xml:18 msgid "<imageobject> <imagedata fileref=\"live-liveMode.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><para> #: en/testing.xml:23 msgid "" "You get this screen if you selected \"Boot Mageia\". If not, you get the " "\"<link linkend=\"doPartitionDisks\">Partitioning</link> step\"" msgstr "" #. type: Content of: <section><section><section><info><title> #: en/testing.xml:28 msgid "Testing hardware" msgstr "" #. type: Content of: <section><section><section><para> #: en/testing.xml:31 msgid "" "One of the Live mode goals is to test if the hardware is correctly managed " "by Mageia. You can check if all devices have a driver in the Hardware " "section of the Mageia Control Center. You can test the most current devices:" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:38 msgid "network interface: configure it with net_applet" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:42 msgid "graphical card: if you see the previous screen, it's already OK." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:47 msgid "webcam:" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:51 msgid "sound: a jingle has already been played" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:55 msgid "printer: configure it and print a test page" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:59 msgid "scanner: scan a document from ..." msgstr "" #. type: Content of: <section><section><section><para> #: en/testing.xml:63 msgid "" "If all is OK for you, you can process to the installation. If not, you can " "leave with the quit button." msgstr "" #. type: Content of: <section><section><section><remark> #: en/testing.xml:66 msgid "The configuration settings you made here are kept for the installation." msgstr "" #. type: Content of: <section><section><section><info><title> #: en/testing.xml:72 msgid "Launch installation" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/testing.xml:76 msgid "" "<imageobject> <imagedata fileref=\"live-liveMode-install.png\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><section><section><para> #: en/testing.xml:81 msgid "" "To launch the installation of Mageia LiveCD or Live DVD to the hard disc or " "SSD drive, simply click on the icon \"Install on Hard Disk\". You will get " "this screen, and then the \"<link linkend=\"doPartitionDisks\">Partitioning</" "link> step\" as for the direct installation." msgstr "" #. type: Content of: <section><info><title> #: en/uninstall-Mageia.xml:3 msgid "Uninstalling Mageia" msgstr "正在卸载Mageia" #. type: Content of: <section><section><title> #: en/uninstall-Mageia.xml:9 msgid "Howto" msgstr "Howto" #. type: Content of: <section><section><para> #: en/uninstall-Mageia.xml:11 msgid "" "If Mageia didn't convince you or you can't install it correctly, in short " "you want get rid of it. That is your right and Mageia also gives you the " "possibility to uninstall. This is not true for every operating system." msgstr "" #. type: Content of: <section><section><para> #: en/uninstall-Mageia.xml:16 msgid "" "After your data backup, reboot your installation Mageia DVD and select " "Rescue system, then, Restore Windows boot loader. At the next boot, you will " "only have Windows with no option to choose your operating system." msgstr "" #. type: Content of: <section><section><para> #: en/uninstall-Mageia.xml:20 msgid "" "To recover the space used by Mageia partitions on Windows, click on " "<code>Start -> Control Panel -> Administrative Tools -> Computer Management -" "> Storage -> Disk Management</code> to access to the partition management. " "You will recognize the Mageia partition because they are labeled " "<guilabel>Unknown</guilabel>, and also by their size and place in the disk. " "Right click on each of these partitions and select <guibutton>Delete</" "guibutton>. The space will be freed." msgstr "" #. type: Content of: <section><section><para> #: en/uninstall-Mageia.xml:28 msgid "" "If you are using Windows XP, you can create a new partition and format it " "(FAT32 or NTFS). It will get a partition letter." msgstr "" #. type: Content of: <section><section><para> #: en/uninstall-Mageia.xml:31 msgid "" "If you have Vista or 7, you have one more possibility, you can extend the " "existing partition that is at the left of the freed space. There are other " "partitioning tools that can be used, such as gparted, available for both " "windows and linux. As always, when changing partitions, be very careful, and " "make sure all important things have been backed up." msgstr "" #. type: Content of: <section><info><title> #: en/unused.xml:9 msgid "Keep or delete unused material" msgstr "" #. type: Content of: <section><mediaobject> #: en/unused.xml:13 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format=" "\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/unused.xml:19 msgid "" "In this step, the installer looks for unused locales packages and unused " "hardware packages. Then it proposes you to delete them. It is a good idea to " "accept, except if you prepare an installation which has to run on different " "hardware." msgstr "" #. type: Content of: <section><mediaobject> #: en/unused.xml:25 msgid "" "<imageobject> <imagedata fileref=\"live-unused-InstallationProgress.png\"/> " "</imageobject>" msgstr "" #. type: Content of: <section><para> #: en/unused.xml:30 msgid "" "The next step is the copying of files on hard disk. This takes some minutes. " "At the end, you get a blank screen for some time, it's normal." msgstr ""