# SOME DESCRIPTIVE TITLE
# Copyright (C) YEAR Mageia
# This file is distributed under the same license as the Mageia Installer Help package.
#
# Translators:
# Daniel Napora <napcok@gmail.com>, 2013
# mrzysko <m.rzysko@gmail.com>, 2014
msgid ""
msgstr ""
"Project-Id-Version: Mageia\n"
"Report-Msgid-Bugs-To: doc-discuss@ml.mageia.org\n"
"POT-Creation-Date: 2014-09-30 20:36+0300\n"
"PO-Revision-Date: 2014-08-03 18:13+0000\n"
"Last-Translator: Yuri Chornoivan <yurchor@ukr.net>\n"
"Language-Team: Polish (http://www.transifex.com/projects/p/mageia/language/"
"pl/)\n"
"Language: pl\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
"|| n%100>=20) ? 1 : 2);\n"

#. type: Content of: <section><info><title>
#: en/acceptLicense.xml:32
msgid "License and Release Notes"
msgstr "Licencja oraz informacje o wydaniu"

#. type: Content of: <section><mediaobject>
#: en/acceptLicense.xml:36
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-license.png\" format="
"\"PNG\" revision=\"1\" xml:id=\"acceptLicense-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-license.png\" format="
"\"PNG\" revision=\"1\" xml:id=\"acceptLicense-im1\"/> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/acceptLicense.xml:45
msgid "License Agreement"
msgstr "Umowa licencyjna"

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:48
msgid ""
"Before installing <application>Mageia</application>, please read the license "
"terms and conditions carefully."
msgstr ""
"Przed instalacją <application>Mageia</application>, proszę przeczytać "
"uważnie warunki umowy licencyjnej."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:51
msgid ""
"These terms and conditions apply to the entire <application>Mageia</"
"application> distribution and must be accepted before you can continue."
msgstr ""
"Warunki umowy licencyjnej odnoszą się do całej dystrybucji "
"<application>Mageia</application> i muszą być zaakceptowane przed "
"kontynuacją instalacji."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:55
msgid ""
"To accept, simply select <guilabel>Accept</guilabel> and then click on "
"<guibutton>Next</guibutton>."
msgstr ""
"Aby zaakceptować po prostu wybierz <guilabel>Akceptuj</guilabel> i kliknij "
"<guibutton>Dalej</guibutton>."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:58
msgid ""
"If you decide not to accept these conditions, then we thank you for looking. "
"Clicking <guibutton>Quit</guibutton> will reboot your computer."
msgstr ""
"Jeśli zdecydujesz że nie zgadzasz się na warunki licencji, dziękujemy za "
"zainteresowanie. Kliknięcie <guibutton>Zakończ</guibutton> spowoduje ponowne "
"uruchomienie komputera."

#. type: Content of: <section><section><info><title>
#: en/acceptLicense.xml:68
msgid "Release Notes"
msgstr "Informacje o wydaniu"

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:75
msgid ""
"To see what's new in this release of <application>Mageia</application>, "
"click on the <guibutton>Release Notes</guibutton> button."
msgstr ""
"Aby zobaczyć co nowego w tym wydaniu <application>Mageia</application>, "
"Kliknij <guibutton>Informacje na temat wydania</guibutton>."

#. type: Attribute 'xml:lang' of: <section>
#: en/add_supplemental_media.xml:2 en/DrakX-cover.xml:2 en/DrakX.xml:1
#: en/media_selection.xml:1
msgid "en"
msgstr "pl"

#. type: Content of: <section><info><title>
#: en/add_supplemental_media.xml:10
msgid "Media Selection (Configure Supplemental Installation Media)"
msgstr "Wybór nośników (konfiguracja dodatkowych nośników instalacyjnych)"

#.  papoteur 2013-04-13  - created 
#.  marja 2013-04-16 added screenshot and expanded title (because is was the same as for media_selection 
#.  marja 2013-04-16 s/a optical/an optcal/ s/support/disc/ s/or or/or/ s/at/during/ as suggested by Tristan Campbell 
#. type: Content of: <section><mediaobject>
#: en/add_supplemental_media.xml:18
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-"
"add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-"
"add_supplemental_media-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-"
"add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-"
"add_supplemental_media-im1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/add_supplemental_media.xml:24
msgid ""
"This screen gives you the list of already recognized repositories. You can "
"add other sources for packages, like an optical disc or a remote source. The "
"source selection determines which packages will be available for selection "
"during the next steps."
msgstr ""
"Ten ekran pokazuje listę znalezionych nośników. Możesz dodać inne nośniki "
"instalacyjne, jak dysk cd/dvd lub zdalny serwer sieciowy. Wybór źródeł "
"(nośników) decyduje o tym jakie pakiety będą mogły zostać wybrane podczas "
"następnych kroków."

#. type: Content of: <section><para>
#: en/add_supplemental_media.xml:29
msgid "For a network source, there are two steps to follow:"
msgstr "Dla nośników sieciowych, wymagane są dwa kroki:"

#. type: Content of: <section><orderedlist><listitem><para>
#: en/add_supplemental_media.xml:33
msgid "Choosing and activation of the network, if not already up."
msgstr ""
"Wybór i aktywacja połączenia sieciowego, jeśli jeszcze nie zostało "
"ustanowione."

#. type: Content of: <section><orderedlist><listitem><para>
#: en/add_supplemental_media.xml:37
msgid ""
"Selecting a mirror or specifying a URL (very first entry). By selecting a "
"mirror, you have access to the selection of all repositories managed by "
"Mageia, like the Nonfree , the Tainted repositories and the Updates. With "
"the URL, you can designate a specific repository or your own NFS "
"installation."
msgstr ""
"Wybór mirrora lub podanie adresu URL. Wybierając mirror masz dostęp do "
"wszystkich repozytoriów udostępnianych przez Mageię, jak Nonfree, Tainted "
"oraz Updates. Za pomocą URL możesz określić jakiekolwiek repozytorium lub "
"swój własny mirror np. NFS."

#. type: Content of: <section><info><title>
#: en/addUser.xml:4
msgid "User and Superuser Management"
msgstr "Zarządzanie użytkownikami"

#.  Started by marja,using Led43's text, on 2012 03 27 
#.  NEEDS TO BE REVIEWED! 
#.  SimonNZG 2012-04-03 has taken a look but needs to come back 
#.  removed para xml:id's, finished the page using Led43's text in the wiki, but
#.        changed his text about the Advanced User Managment screen (the only thing 
#.        about guest account there, is the box you can tick or untick to enable or 
#.        disable it, the rest is about the normal user you're adding in the previous
#.        screen), marja, 20120409
#.  barjac 2012-04-13 moved explanation of xguest lower down. I don't understand
#.        "rbash" in the xguest warning - is that correct? 
#.  JohnR 2012-04-19 Language proofreading  
#.  marja 2012-04-24 Added screenshot 
#.  marja 2013-04-26 added new note 
#. type: Content of: <section><mediaobject>
#: en/addUser.xml:27
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setRootPassword.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"setRootPassword-im1\"></imagedata> "
"</imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setRootPassword.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"setRootPassword-im1\"></imagedata> "
"</imageobject>"

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:34
msgid "Set Administrator (root)  Password:"
msgstr "Ustawienie hasła administratora (root):"

#. type: Content of: <section><section><para>
#: en/addUser.xml:38
msgid ""
"It is advisable for all <application>Mageia</application> installations to "
"set a superuser or administrator's password, usually called the "
"<emphasis>root password</emphasis> in Linux. As you type a password into the "
"top box the colour of its shield will change from red to yellow to green "
"depending on the strength of the password. A green shield shows you are "
"using a strong password. You need to repeat the same password in the box "
"just below the first password box, this checks that you have not mistyped "
"the first password by comparing them."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:48
msgid ""
"All passwords are case sensitive, it is best to use a mixture of letters "
"(upper and lower case), numbers and other characters in a password."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:56
msgid "Enter a user"
msgstr "Dodaj użytkownika"

#. type: Content of: <section><section><para>
#: en/addUser.xml:59
msgid ""
"Add a user here. A user has fewer rights than the superuser (root), but "
"enough to surf the internet, use office applications or play games and "
"anything else the average user does with his computer"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:65
msgid ""
"<guibutton>Icon</guibutton>: if you click on this button it will change the "
"users icon."
msgstr ""
"<guibutton>Ikona</guibutton>: użycie tego przycisku zmieni ikonę użytkownika."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:70
msgid ""
"<guilabel>Real Name</guilabel>: Insert the users real name into this text "
"box."
msgstr ""
"<guilabel>Imię i nazwisko</guilabel>: Wpisz swoje imię i nazwisko do tego "
"pola tekstowego"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:75
msgid ""
"<guilabel>Login Name</guilabel>: Here you enter the user login name or let "
"drakx use a version of the users real name. <emphasis>The login name is case "
"sensitive.</emphasis>"
msgstr ""
"<guilabel>Nazwa użytkownika</guilabel>: Tutaj wpisz nazwę użytkownika - "
"będzie ona używana podczas logowania. Możesz też pozwolić, aby instalator "
"wygenerował nazwę na podstawie imienia i nazwiska. <emphasis>Wielkość liter "
"ma znaczenie.</emphasis>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:81
msgid ""
"<guilabel>Password</guilabel>: In this text box you should type in the user "
"password. There is a shield at the end of the text box that indicates the "
"strength of the password. (See also <xref linkend=\"givePassword\"></xref>)"
msgstr ""
"<guilabel>Hasło</guilabel>: W tym polu wpisz hasło użytkownika. Pojawi się w "
"nim ikonka tarczy, która oznacza siłę hasła (Zobacz również <xref linkend="
"\"givePassword\"></xref>)"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:87
msgid ""
"<guilabel>Password (again)</guilabel>: Retype the user password into this "
"text box and drakx will check you have the same password in each of the user "
"password text boxes."
msgstr ""
"<guilabel>Hasło (powtórnie)</guilabel>: Wpisz powtórnie hasło użytkownika w "
"tym polu, instalator sprawdzi czy hasła się zgadzają."

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:94
msgid ""
"Any user you add while installing Mageia, will have a world readable (but "
"write protected) home directory."
msgstr ""
"Wszyscy użytkownicy, których dodasz podczas instalacji Magei, będą mieli "
"katalogi domowe (dostępne do odczytu dla każdego, ale do zapisu tylko dla "
"danego użytkownika)"

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:97
msgid ""
"However, while using your new install, any user you add in <emphasis>MCC - "
"System - Manage users on system</emphasis> will have a home directory that "
"is both read and write protected."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:101
msgid ""
"If you don't want a world readable home directory for anyone, it is advised "
"to only add a temporary user now and to add the real one(s) after reboot."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:105
msgid ""
"If you prefer world readable home directories, you might want to add all "
"extra needed users in the <emphasis>Configuration - Summary</emphasis> step "
"during the install. Choose <emphasis>User management</emphasis>."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:109
msgid "The access permissions can also be changed after the install."
msgstr "Ustawienia dostępu mogą być również zmienione po instalacji."

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:116
msgid "Advanced User Management"
msgstr ""

#. type: Content of: <section><section><para>
#: en/addUser.xml:119
msgid ""
"If the <guibutton>advanced</guibutton> button is clicked you are offered a "
"screen that allows you to edit the settings for the user you are adding. "
"Additionally, you can disable or enable a guest account."
msgstr ""

#. type: Content of: <section><section><warning><para>
#: en/addUser.xml:124
msgid ""
"Anything a guest with a default <emphasis>rbash</emphasis> guest account "
"saves to his /home directory will be erased when he logs out.  The guest "
"should save his important files to a USB key."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:131
msgid ""
"<guilabel>Enable guest account</guilabel>: Here you can enable or disable a "
"guest account. The guest account allows a guest to log into and use the PC, "
"but he has more restricted access than normal users."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:138
msgid ""
"<guilabel>Shell</guilabel>: This drop down list allows you to change the "
"shell used by the user you are adding in the previous screen, options are "
"Bash, Dash and Sh"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:144
msgid ""
"<guilabel>User ID</guilabel>: Here you can set the user ID for the user you "
"are adding in the previous screen. This is a number.  Leave it blank unless "
"you know what you are doing."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:150
msgid ""
"<guilabel>Group ID</guilabel>: This lets you set the group ID.  Also a "
"number, usually the same one as for the user. Leave it blank unless you know "
"what you are doing."
msgstr ""

#. type: Content of: <section><info><title>
#: en/ask_mntpoint_s.xml:11
msgid "Choose the mount points"
msgstr "Wybierz punkty montowania"

#.  Made by marja on 2012 03 28 
#.  NEEDS TO BE REVIEWED! 
#.  SimonNZG 2012-04-03 has taken a look but needs to come back 
#.  removed para xml:id's, marja, 20120409 
#.  barjac 14/04/2012 Minor edit to improve grammar and replaced "at least ONE"
#.        with "a", as I can't imagine having more than one root partition ;) 
#.  Lebarhon : I put [] where it seems having mistakes 
#.  Marja: you're right, in English English it is "its type", however, the Americans
#.        write "it's type". And you're right about the redundant part, too, I removed it
#.  And JohnR says the Americans are WRONG! :-)) 
#.  2012-04-19  Language proofreading done 
#. type: Content of: <section><mediaobject>
#: en/ask_mntpoint_s.xml:27
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-chooseMountpoints.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"chooseMountPoints-im1\"></"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-chooseMountpoints.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"chooseMountPoints-im1\"></"
"imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/ask_mntpoint_s.xml:33
msgid ""
"Here you see the Linux partitions that have been found on your computer. If "
"you don't agree with the <application>DrakX</application> suggestions, you "
"can change the mount points."
msgstr ""

#. type: Content of: <section><note><para>
#: en/ask_mntpoint_s.xml:38
msgid ""
"If you change anything, make sure you still have a <literal>/</literal> "
"(root) partition."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:44
msgid ""
"Every partition is shown as follows: \"Device\" (\"Capacity\", \"Mount point"
"\", \"Type\")."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:49
msgid ""
"\"Device\", is made up of: \"hard drive\", [\"hard drive number\"(letter)], "
"\"partition number\" (for example, \"sda5\")."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:55
msgid ""
"If you have many partitions, you can choose many different mount points from "
"the drop down menu, such as <literal>/</literal>, <literal>/home</literal> "
"and <literal>/var</literal>. You can even make your own mount points, for "
"instance <literal>/video</literal> for a partition where you want to store "
"your films, or <literal>/cauldron-home</literal> for the <literal>/home</"
"literal> partition of a cauldron install."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:65
msgid ""
"For partitions you don't need to have access to, you can leave the mount "
"point field blank."
msgstr ""

#. type: Content of: <section><warning><para>
#: en/ask_mntpoint_s.xml:71
msgid ""
"Choose <guibutton>Previous</guibutton> if you are not sure what to choose, "
"and then tick <guilabel>Custom disk partitioning</guilabel>. In the screen "
"that follows, you can click on a partition to see its type and size."
msgstr ""

#. type: Content of: <section><para>
#: en/ask_mntpoint_s.xml:77
msgid ""
"If you are sure the mount points are correct, click on <guibutton>Next</"
"guibutton>, and choose whether you only want to format the partition(s) "
"DrakX suggests, or more."
msgstr ""

#. type: Content of: <section><info><title>
#: en/chooseDesktop.xml:5
msgid "Desktop Selection"
msgstr "Wybór pulpitu"

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:11
msgid ""
"Depending on your selection here, you may be offered further screens to fine "
"tune your choice."
msgstr ""

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:13
msgid ""
"After the selection step(s), you will see a slide show during package "
"installation. The slide show can be disabled by pressing the "
"<guilabel>Details</guilabel> button"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/chooseDesktop.xml:20
msgid ""
"<imageobject> <imagedata fileref=\"dx2-chooseDesktop.png\" align=\"center\" "
"format=\"PNG\" ></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-chooseDesktop.png\" align=\"center\" "
"format=\"PNG\" ></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:26
msgid ""
"Choose whether you prefer to use the <application>KDE</application> or "
"<application>Gnome</application> desktop environment. Both come with a full "
"set of useful applications and tools. Tick <guilabel>Custom</guilabel> if "
"you want to use neither or both, or if you want something other than the "
"default software choices for these desktop environments. The "
"<application>LXDE</application> desktop is lighter than the previous two, "
"sporting less eye candy and fewer packages installed by default."
msgstr ""

#. type: Content of: <section><info><title>
#: en/choosePackageGroups.xml:4
msgid "Package Group Selection"
msgstr "Wybór grup pakietów"

#. 2012-12-26 marja - exported this section from choosePackages.xml to start a new page
#. type: Content of: <section><mediaobject>
#: en/choosePackageGroups.xml:10
msgid ""
"<imageobject> <imagedata fileref=\"dx2-choosePackageGroups.png\" align="
"\"center\" format=\"PNG\" ></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-choosePackageGroups.png\" align="
"\"center\" format=\"PNG\" ></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/choosePackageGroups.xml:16
msgid ""
"Packages have been sorted into groups, to make choosing what you need on "
"your system a lot easier. The groups are fairly self explanatory, however "
"more information about the content of each is available in tool-tips which "
"become visible as the mouse is hovered over them."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:23
msgid "Workstation."
msgstr "Stacja robocza"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:27
msgid "Server."
msgstr "Serwer"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:31
msgid "Graphical Environment."
msgstr "Środowisko graficzne"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:35
msgid ""
"Individual Package Selection: You can use this option to manually add or "
"remove packages."
msgstr ""

#. type: Content of: <section><para>
#: en/choosePackageGroups.xml:39
msgid ""
"Read <xref linkend=\"minimal-install\"></xref> for instructions on how to do "
"a minimal install."
msgstr ""

#. type: Content of: <section><info><title>
#: en/choosePackagesTree.xml:4
msgid "Choose Individual Packages"
msgstr "Samodzielny wybór pakietów"

#. 2012-12-26 marja - exported this section from choosePackages.xml to start a new page
#. type: Content of: <section><mediaobject>
#: en/choosePackagesTree.xml:11
msgid ""
"<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" align="
"\"center\" format=\"PNG\" ></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" align="
"\"center\" format=\"PNG\" ></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/choosePackagesTree.xml:17
msgid ""
"Here you can add or remove any extra packages to customise your installation."
msgstr ""

#. type: Content of: <section><para>
#: en/choosePackagesTree.xml:20
msgid ""
"After having made your choice, you can click on the <guibutton>floppy icon</"
"guibutton> at the bottom of the page to save your choice of packages (saving "
"to a USB key works, too). You can then use this file to install the same "
"packages on another system, by pressing the same button during install and "
"choosing to load it."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureServices.xml:12
msgid "Configure your Services"
msgstr "Konfiguracja usług"

#.  2012-12-25 marja - moved this section out of misc-params.xml 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/configureServices.xml:21
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></"
"imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/configureServices.xml:27
msgid ""
"Here you can set which services should (not) start when you boot your system."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:30
msgid ""
"There are four groups, click on the triangle before a group to expand it and "
"see all services in it."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:34
msgid "The setting DrakX chose are usually good."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:37
msgid ""
"If you highlight a service, some information about it is shown in the info "
"box below."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:41
msgid "Only change things when you know very well what you are doing."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureTimezoneUTC.xml:12
msgid "Configure your Timezone"
msgstr "Konfiguruj strefę czasową"

#.  2012-12-25 marja - moved this part out of misc-params.xml 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/configureTimezoneUTC.xml:20
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureTimezoneUTC."
"png\" align=\"center\" format=\"PNG\" xml:id=\"configureTimezoneUTC-im1\"></"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureTimezoneUTC."
"png\" align=\"center\" format=\"PNG\" xml:id=\"configureTimezoneUTC-im1\"></"
"imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/configureTimezoneUTC.xml:26
msgid ""
"Choose your time zone by choosing your country or a city close to you in the "
"same time zone."
msgstr ""
"Wybierz swoją strefę czasową poprzez wybranie swojego kraju lub miasta w "
"pobliżu w tej samej strefie czasowej."

#. type: Content of: <section><para>
#: en/configureTimezoneUTC.xml:30
msgid ""
"In next screen you can choose to set your hardware clock to local time or to "
"GMT, also known as UTC."
msgstr ""

#. type: Content of: <section><note><para>
#: en/configureTimezoneUTC.xml:35
msgid ""
"If you have more than one operating system on your computer, make sure they "
"are all set to local time, or all to UTC/GMT."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureX_card_list.xml:11
msgid "Choose an X Server (Configure your Graphic Card)"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/configureX_card_list.xml:16
msgid ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id="
"\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" format="
"\"PNG\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id="
"\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" format="
"\"PNG\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:21
msgid ""
"DrakX has a very comprehensive database of video cards and will usually "
"correctly identify your video device."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:24
msgid ""
"If the installer has not correctly detected your graphic card and you know "
"which one you have, you can select it from the tree by:"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:27 en/configureX_monitor.xml:69
msgid "vendor"
msgstr "dostawca"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:31
msgid "then the name of your card"
msgstr "następnie nazwa karty"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:35
msgid "and the type of card"
msgstr "oraz typ karty"

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:39
msgid ""
"If you cannot find your card in the vendor lists (because it's not yet in "
"the database or it's an older card) you may find a suitable driver in the "
"Xorg category"
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:43
msgid ""
"The Xorg listing provides more than 40 generic and open source video card "
"drivers. If you still can't find a named driver for your card there is the "
"option of using the vesa driver which provides basic capabilities."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:48
msgid ""
"Be aware that if you select an incompatible driver you may only have access "
"to the Commandline Interface."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:51
msgid ""
"Some video card manufacturers provide proprietary drivers for Linux which "
"may only be available in the Nonfree repository and in some cases only from "
"the card manufacturers' websites."
msgstr ""
"Niektórzy producenci kart graficznych udostępniają własnościowe sterowniki "
"dla Linuksa, które mogą być umieszczone jedynie w repozytorium Nonfree, w "
"niektórych przypadkach są one dostępne jedynie na stronie producenta."

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:55
msgid ""
"The Nonfree repository needs to be explicitly enabled to access them.  If "
"you didn't select it previously, you should do this after your first reboot."
msgstr ""
"Aby je zainstalować musi być włączone repozytorium Nonfree. Jeśli nie "
"włączono tego repozytorium wcześniej, należy je włączyć po ponownym "
"uruchomieniu komputera."

#. type: Content of: <section><info><title>
#: en/configureX_chooser.xml:4
msgid "Graphic Card and Monitor Configuration"
msgstr ""

#.  Marja 2012-08-10, copied setupX.xml to this file and replaced all "setupX" in the code by "configureX_chooser", because this is the correct filename for this page
#. type: Content of: <section><mediaobject>
#: en/configureX_chooser.xml:11
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureX_chooser.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureX_chooser-im1\"> </"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureX_chooser.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureX_chooser-im1\"> </"
"imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/configureX_chooser.xml:18
msgid ""
"No matter which graphical environment (also known as desktop environment) "
"you chose for this install of <application>Mageia</application>, they are "
"all based on a graphical user interface system called <acronym>X Window "
"System</acronym>, or simply <acronym>X</acronym>. So in order for "
"<acronym>KDE</acronym>, <acronym>Gnome</acronym>, <acronym>LXDE</acronym> or "
"any other graphical environment to work well, the following <acronym>X</"
"acronym> settings need to be correct. Choose the correct settings if you can "
"see that <application>DrakX</application> didn't make a choice, or if you "
"think the choice is incorrect."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:31
msgid ""
"<emphasis><guibutton>Graphic card</guibutton></emphasis>: Choose your card "
"from the list if needed."
msgstr ""
"<emphasis><guibutton>Karta graficzna</guibutton></emphasis>: Wybierz swoją "
"kartę graficzną z listy."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:37
msgid ""
"<emphasis><guibutton>Monitor</guibutton></emphasis>: You can choose "
"<guilabel>Plug'n Play</guilabel> when applicable, or choose your monitor "
"from the <guilabel>Vendor</guilabel> or <guilabel>Generic</guilabel> list. "
"Choose <guilabel>Custom</guilabel> if you prefer to manually set the "
"horizontal and vertical refresh rates of your monitor."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><warning><para>
#: en/configureX_chooser.xml:45
msgid "Incorrect refresh rates may damage your monitor"
msgstr "Niepoprawna wartość odświeżania może uszkodzić monitor"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:51
msgid ""
"<emphasis><guibutton>Resolution</guibutton></emphasis>: Set the desired "
"resolution and color depth of your monitor here."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:56
msgid ""
"<emphasis><guibutton>Test</guibutton></emphasis>: The test button does not "
"always appear during install. If the button is there, you can control your "
"settings by pressing it. If you see a question asking you whether your "
"settings are correct, you can answer \"yes\", and the settings will be kept. "
"If you don't see anything, you'll return to the configuration screen and be "
"able to reconfigure everything until the test is good. <emphasis>Make sure "
"your settings are on the safe side if the test button isn't available</"
"emphasis>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:67
msgid ""
"<emphasis><guibutton>Options</guibutton></emphasis>: Here you can choose to "
"enable or disable various options."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureX_monitor.xml:18
msgid "Choosing your Monitor"
msgstr "Wybór monitora"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:21
msgid ""
"DrakX has a very comprehensive database of monitors and will usually "
"correctly identify yours."
msgstr ""

#. type: Content of: <section><warning><para>
#: en/configureX_monitor.xml:26
msgid ""
"<emphasis>Selecting a monitor with different characteristics could damage "
"your monitor or video hardware. Please don't try something without knowing "
"what you are doing.</emphasis> If in doubt you should consult your monitor "
"documentation"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/configureX_monitor.xml:34
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor."
"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor."
"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:42
msgid "<emphasis>Custom</emphasis>"
msgstr "<emphasis>Własny</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:44
msgid ""
"This option allows you to set two critical parameters, the vertical refresh "
"rate and the horizontal sync rate. Vertical refresh determines how often the "
"screen is refreshed and horizontal sync is the rate at which scan lines are "
"displayed."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:49
msgid ""
"It is <emphasis>VERY IMPORTANT</emphasis> that you do not specify a monitor "
"type with a sync range that is beyond the capabilities of your monitor: you "
"may damage your monitor. If in doubt, choose a conservative setting and "
"consult your monitor documentation."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:55
msgid "<emphasis>Plug 'n Play</emphasis>"
msgstr "<emphasis>Plug 'n Play</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:58
msgid ""
"This is the default option and tries to determine the monitor type from the "
"monitor database."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:63
msgid "<emphasis>Vendor</emphasis>"
msgstr "<emphasis>Dostawca</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:65
msgid ""
"If the installer has not correctly detected your monitor and you know which "
"one you have, you can select it from the tree by selecting:"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_monitor.xml:73
msgid "the monitor manufacturers name"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_monitor.xml:77
msgid "the monitor description"
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:82
msgid "<emphasis>Generic</emphasis>"
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:84
msgid ""
"selecting this group displays nearly 30 display configurations such as "
"1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is "
"often a good monitor selection group if you need to use the Vesa card driver "
"when your video hardware cannot be determined automatically. Once again it "
"may be wise to be conservative in your selections."
msgstr ""

#. type: Content of: <section><info><title>
#: en/diskdrake.xml:19
msgid "Custom disk partitioning with DiskDrake"
msgstr "Zaawansowany podział na partycje za pomocą DiskDrake"

#. type: Content of: <section><mediaobject>
#: en/diskdrake.xml:26
msgid ""
"<imageobject> <imagedata fileref=\"dx2-diskdrake.png\" align=\"center\"></"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-diskdrake.png\" align=\"center\"></"
"imagedata> </imageobject>"

#. type: Content of: <section><warning><para>
#: en/diskdrake.xml:33
msgid ""
"If you wish to use encryption on your <literal>/</literal> partition you "
"must ensure that you have a separate <literal>/boot</literal> partition. The "
"encryption option for the <literal>/boot</literal> partition must NOT be "
"set, otherwise your system will be unbootable."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:39
msgid ""
"Adjust the layout of your disk(s) here. You can remove or create partitions, "
"change the filesystem of a partition or change its size and even view what "
"is in them before you start."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:42
msgid ""
"There is a tab for every detected hard disk or other storage device, like an "
"USB key. For example sda, sdb and sdc if there are three of them."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:45
msgid ""
"Push <guibutton>Clear all</guibutton> to wipe all partitions on the selected "
"storage device"
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:47
msgid ""
"For all other actions: click on the desired partition first. Then view it, "
"or choose a filesystem and a mount point, resize it or wipe it."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:49
msgid "Continue until you adjusted everything to your wishes."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:51
msgid "Click <guibutton>Done</guibutton> when you're ready."
msgstr ""

#. type: Content of: <section><info><title>
#: en/doPartitionDisks.xml:25
msgid "Partitioning"
msgstr "Partycjonowanie"

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:28
msgid ""
"In this screen you can see the content of your hard drive(s) and see the "
"solutions the DrakX partitioning wizard found for where to install "
"<application>Mageia</application>."
msgstr ""

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:33
msgid ""
"The options available from the list below will vary depending on your "
"particular hard drive(s) layout and content."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/doPartitionDisks.xml:38
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-doPartitionDisks.png"
"\" /> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-doPartitionDisks.png"
"\" /> </imageobject>"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:45
msgid "Use Existing Partitions"
msgstr "Użyj istniejących partycji"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:48
msgid ""
"If this option is available, then existing Linux compatible partitions have "
"been found and may be used for the installation."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:54
msgid "Use Free Space"
msgstr "Wykorzystaj wolne miejsce"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:56
msgid ""
"If you have unused space on your hard drive then this option will use it for "
"your new Mageia installation."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:62
msgid "Use Free Space on a Windows Partition"
msgstr "Wykorzystaj wolne miejsce na partycji Windows"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:65
msgid ""
"If you have unused space on an existing Windows partition, the installer may "
"offer to use it."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:69
msgid ""
"This can be a useful way of making room for your new Mageia installation, "
"but is a risky operation so you should make sure you have backed up all "
"important files!"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:74
msgid ""
"Note that this involves shrinking the size of the Windows partition. The "
"partition must be \"clean\", meaning that Windows must have closed down "
"correctly the last time it was used. It must also have been defragmented, "
"although this is not a guarantee that all files in the partition have been "
"moved out of the area that is about to be used. It is highly recommended to "
"back up your personal files."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:84
msgid "Erase and use Entire Disk."
msgstr "Wymaż i wykorzystaj cały dysk"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:87
msgid "This option will use the complete drive for Mageia."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:90
msgid "Note! This will erase ALL data on the selected hard drive. Take care!"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:93
msgid ""
"If you intend to use part of the disk for something else, or you already "
"have data on the drive that you are not prepared to lose, then do not use "
"this option."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:100
msgid "Custom"
msgstr "Własne"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:102
msgid ""
"This gives you complete control over the placing of the installation on your "
"hard drive(s)."
msgstr ""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:109
msgid ""
"Some newer drives are now using 4096 byte logical sectors, instead of the "
"previous standard of 512 byte logical sectors. Due to lack of available "
"hardware, the partitioning tool used in the installer has not been tested "
"with such a drive. Also some ssd drives now use an erase block size over 1 "
"MB. We suggest to pre-partition the drive, using an alternative partitioning "
"tool like gparted, if you own such a device, and to use the following "
"settings:"
msgstr ""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:117
msgid "\"Align to\" \"MiB\""
msgstr ""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:119
msgid "\"Free space preceding (MiB)\" \"2\""
msgstr ""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:121
msgid ""
"Also make sure all partitions are created with an even number of megabytes."
msgstr ""

#. type: Content of: <article><info><title>
#: en/DrakX-cover.xml:4 en/DrakX-cover.xml:22 en/DrakX.xml:3
msgid "Installation with DrakX"
msgstr "Instalacja za pomocą DrakX"

#. type: Content of: <book><info><cover><info>
#: en/DrakX-cover.xml:5 en/DrakX-cover.xml:23
msgid "<publisher> <publishername>Mageia.org</publishername> </publisher>"
msgstr ""

#. type: Content of: <book><info><cover><info><revhistory><revision><date>
#: en/DrakX-cover.xml:10 en/DrakX-cover.xml:28
msgid "February 2014"
msgstr ""

#. type: Content of: <book><info><cover><info><revhistory><revision><revremark>
#: en/DrakX-cover.xml:11 en/DrakX-cover.xml:29
msgid "Mageia 4"
msgstr "Mageia 4"

#. type: Content of: <book><info><cover><para>
#: en/DrakX-cover.xml:15
msgid "The Official Documentation for Mageia"
msgstr ""

#. type: Content of: <book><info><cover><mediaobject>
#: en/DrakX-cover.xml:17
msgid "<imageobject> <imagedata fileref=\"mageia-2013.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <article><info><cover><para><note>
#: en/DrakX-cover.xml:42 en/DrakX.xml:6
msgid "<note>"
msgstr "<note>"

#. type: Content of: <article><info><cover><para><note><para>
#: en/DrakX-cover.xml:43 en/DrakX.xml:7
msgid ""
"No one will see all the installer screens that you see in this manual. Which "
"screens you will see, depends on your hardware and the choices you make "
"while installing."
msgstr ""

#. type: Content of: <article><info><cover><para>
#: en/DrakX-cover.xml:46 en/DrakX.xml:10
msgid "</note>"
msgstr "</note>"

#. type: Content of: <article><info><cover><para>
#: en/DrakX-cover.xml:48 en/DrakX.xml:12
msgid ""
"The texts and screenshots in this manual are available under the CC BY-SA "
"3.0 license <link ns6:href=\"http://creativecommons.org/licenses/by-sa/3.0/"
"\">http://creativecommons.org/licenses/by-sa/3.0/</link>."
msgstr ""

#. type: Content of: <article><info><cover><para>
#: en/DrakX-cover.xml:52 en/DrakX.xml:16
msgid ""
"This manual was produced with the help of the <link ns6:href=\"http://www."
"calenco.com\">Calenco CMS</link> developed by <link ns6:href=\"http://www."
"neodoc.biz\">NeoDoc</link>."
msgstr ""

#. type: Content of: <article><info><cover><para>
#: en/DrakX-cover.xml:54 en/DrakX.xml:18
msgid ""
"It was written by volunteers in their free time. Please contact <link ns6:"
"href=\"https://wiki.mageia.org/en/Documentation_team\">Documentation Team</"
"link>, if you would like to help improve this manual."
msgstr ""

#. type: Content of: <section><info><title>
#: en/exitInstall.xml:4
msgid "Congratulations"
msgstr "Gratulacje"

#.  Started by marja on 2012 03 29 
#.  NEEDS TO BE WRITTEN AND THEN REVIEWED! 
#.  marja - 2012-04-24 added screenshot and text 
#.  same day, added "s" to "sytems"
#. type: Content of: <section><mediaobject>
#: en/exitInstall.xml:14
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-exitInstall.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"exitInstall-im1\"> </imagedata> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-exitInstall.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"exitInstall-im1\"> </imagedata> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/exitInstall.xml:21
msgid ""
"You have finished installing and configuring <application>Mageia</"
"application> and it is now safe to remove the installation medium and reboot "
"your computer."
msgstr ""
"Instalacja i konfiguracja <application>Magei</application>została "
"zakończona, teraz można bezpiecznie usunąć nośnik instalacyjny i uruchomić "
"komputer ponownie."

#. type: Content of: <section><para>
#: en/exitInstall.xml:25
msgid ""
"After reboot, in the bootloader screen, you can choose between the operating "
"systems on your computer (if you have more than one)."
msgstr ""

#. type: Content of: <section><para>
#: en/exitInstall.xml:28
msgid ""
"If you didn't adjust the settings for the bootloader, your Mageia install "
"will be automatically selected and started."
msgstr ""

#. type: Content of: <section><para>
#: en/exitInstall.xml:31
msgid "Enjoy!"
msgstr ""

#. type: Content of: <section><para>
#: en/exitInstall.xml:33
msgid ""
"Visit www.mageia.org if you have any questions or want to contribute to "
"Mageia"
msgstr ""
"Jeśli masz jakieś pytania, bądź chciał(a)byś dołączyć do pojektu Mageia - "
"odwiedź www.mageia.org"

#. type: Content of: <section><info><title>
#: en/formatPartitions.xml:4
msgid "Formatting"
msgstr "Formatowanie"

#.  Made by marja on 2012 03 29 
#.  NEEDS TO BE REVIEWED! 
#.  marja 2012-04-24 added screenshot 
#.  marja 2012-04-24 added emphasis tags in formatPartitions-pa1 
#. type: Content of: <section><mediaobject>
#: en/formatPartitions.xml:18
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-formatPartitions.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"formatPartitions-im1\"> </"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-formatPartitions.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"formatPartitions-im1\"> </"
"imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/formatPartitions.xml:25
msgid ""
"Here you can choose which partition(s) you wish to format. Any data on "
"partitions <emphasis>not</emphasis> marked for formatting will be saved."
msgstr ""
"Tutaj możesz wybrać, które partycje chcesz sformatować. Wszystkie dane na "
"partycjach <emphasis>nie</emphasis> zaznaczonych do formatowania zostaną "
"zachowane."

#. type: Content of: <section><para>
#: en/formatPartitions.xml:29
msgid "Usually at least the partitions DrakX selected, need to be formatted"
msgstr ""

#. type: Content of: <section><para>
#: en/formatPartitions.xml:32
msgid ""
"Click on <guibutton>Advanced</guibutton> to choose partitions you want to "
"check for so called <emphasis>bad blocks</emphasis>"
msgstr ""

#. type: Content of: <section><tip><para>
#: en/formatPartitions.xml:37
msgid ""
"If you're not sure you have made the right choice, you can click on "
"<guibutton>Previous</guibutton>, again on <guibutton>Previous</guibutton> "
"and then on <guibutton>Custom</guibutton> to get back to the main screen.  "
"In that screen you can choose to view what is in your partitions."
msgstr ""

#. type: Content of: <section><para>
#: en/formatPartitions.xml:44
msgid ""
"When you are confident about the selection, click on <guibutton>Next</"
"guibutton> to continue."
msgstr ""

#. type: Content of: <section><info><title>
#: en/installer.xml:17
msgid "DrakX, the Mageia Installer"
msgstr "DrakX instalator Mageia"

#. type: Content of: <section><para>
#: en/installer.xml:20
msgid ""
"Whether you are new to GNU-Linux or an experienced user, the Mageia "
"Installer is designed to help make your installation or upgrade as easy as "
"possible."
msgstr ""
"Niezależnie czy jesteś początkującym, czy zaawansowanym użytkownikiem GNU-"
"Linuxa, instalator Magei jest zaprojektowany tak, aby uczynić instalację lub "
"aktualizację łatwą i przyjemną. "

#. type: Content of: <section><para>
#: en/installer.xml:28
msgid ""
"The initial menu screen has various options, however the default one will "
"start the installer, which will normally be all that you will need."
msgstr ""
"Pierwszy ekran instalatora zawiera różne opcje,jednak opcja zaznaczona "
"domyślnie rozpoczyna instalację i zazwyczaj będzie to wszystko czego "
"potrzebujesz."

#. type: Content of: <section><figure><info><title>
#: en/installer.xml:34
msgid "Installation Welcome Screen"
msgstr ""

#. type: Content of: <section><figure>
#: en/installer.xml:33
msgid "<placeholder type=\"info\" id=\"0\"/>"
msgstr ""

#. type: Content of: <section><figure><para>
#: en/installer.xml:37
msgid "Here is the default welcome screen when using a Mageia DVD:"
msgstr ""

#. type: Content of: <section><figure><mediaobject>
#: en/installer.xml:40
msgid ""
"<imageobject> <imagedata xml:id=\"BId-drakx-intro-im1\" revision=\"1\" align="
"\"center\" format=\"PNG\" fileref=\"../dx-welcome.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><figure>
#: en/installer.xml:39
msgid "<placeholder type=\"mediaobject\" id=\"0\"/>"
msgstr ""

#. type: Content of: <section><para>
#: en/installer.xml:46
msgid ""
"From this first screen, it is possible to set some personal preferences:"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:51
msgid ""
"The language (for the installation only, may be different that the chosen "
"language for the system) by pressing the key F2"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:57
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:62
msgid "Use the arrow keys to select the language and press the key Enter."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:65
msgid ""
"Here is for example, the French welcome screen when using a Live DVD/CD. "
"Note that the Live DVD/CD menu does not propose: <guilabel>Rescue System</"
"guilabel>, <guilabel>Memory test</guilabel> and <guilabel>Hardware Detection "
"Tool</guilabel>."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:73
msgid "<imageobject> <imagedata fileref=\"dx-welcome4fr.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:82
msgid "Change the screen resolution by pressing the F3 key."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:85
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:92
msgid "Add some kernel options by pressing the F6 key."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:94
msgid ""
"If the installation fails, then it may be necessary to try again using one "
"of the extra options. The menu called by F6 displays a new line called "
"<guilabel>Boot options</guilabel> and propose four entries:"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:99
msgid "- Default, it doesn't alter anything in the default options."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:102
msgid ""
"- Safe Settings, priority is given to the safer options to the detriment of "
"performances."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:105
msgid ""
"- No ACPI (Advanced Configuration and Power Interface), power management "
"isn't taken into account."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:108
msgid ""
"- No Local APIC (Local Advanced Programmable Interrupt Controller), it is "
"about CPU interruptions, select this option if you are asked for."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:112
msgid ""
"When you select one of these entries, it modifies the default options "
"displayed in the <guilabel>Boot Options</guilabel> line."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><note><para>
#: en/installer.xml:116
msgid ""
"In some Mageia releases, it may happen that the entries selected with the "
"key F6 does not appear in the <guilabel>Boot Options</guilabel> line, "
"however, they are really taken into account."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:123
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:130
msgid "Add more kernel options by pressing the key F1"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:132
msgid ""
"Pressing F1 opens a new window with more available options. Select one with "
"the arrow keys and press Enter to have more details or press the Esc key to "
"go back to the welcome screen."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:139
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:146
msgid ""
"The detailed view about the option splash. Press Esc or select "
"<guilabel>Return to Boot Options</guilabel> to go back to the options list. "
"These options can by added by hand in the <guilabel>Boot options</guilabel> "
"line."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:152
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><note><para>
#: en/installer.xml:160
msgid "The help is translated in the chosen language with the F2 key."
msgstr ""

#. type: Content of: <section><para>
#: en/installer.xml:166
msgid ""
"Here is the default welcome screen when using a Wired Network-based "
"Installation CD (Boot.iso or Boot-Nonfree.iso images):"
msgstr ""

#. type: Content of: <section><para>
#: en/installer.xml:169
msgid ""
"It does not allow to change the language, the available options are "
"described in the screen. For more information about using a Wired Network-"
"based Installation CD, see <link ns2:href=\"https://wiki.mageia.org/en/Boot."
"iso_install\">the Mageia Wiki</link>"
msgstr ""

#. type: Content of: <section><warning><para>
#: en/installer.xml:175
msgid "The keyboard layout is the American one."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/installer.xml:179
msgid ""
"<imageobject> <imagedata revision=\"1\" xml:id=\"installer-im2\" align="
"\"center\" format=\"PNG\" fileref=\"../dx-help.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/installer.xml:186
msgid "The installation steps"
msgstr "Etapy instalacji"

#. type: Content of: <section><section><para>
#: en/installer.xml:189
msgid ""
"The install process is divided into a number of steps, which can be followed "
"on the side panel of the screen."
msgstr ""
"Proces instalacji jest podzielony na kilka etapów, możesz je śledzić po "
"lewej stronie ekranu instalatora."

#. type: Content of: <section><section><para>
#: en/installer.xml:192
msgid ""
"Each step has one or more screens which may also have <guibutton>Advanced</"
"guibutton> buttons with extra, less commonly required, options."
msgstr ""
"Każdy etap zawiera jeden lub więcej ekranów, które mogą także mieć przycisk "
"<guibutton>Zaawansowane</guibutton>, który umożliwia dostęp do rzadziej "
"używanych opcji."

#. type: Content of: <section><section><para>
#: en/installer.xml:196
msgid ""
"Most screens have <guibutton>Help</guibutton> buttons which give further "
"explanations about the current step."
msgstr ""
"Większość ekranów posiada przycisk <guibutton>Pomoc</guibutton>, który "
"pozwala na zapoznanie się z wyjaśnieniami dotyczącymi aktualnego etapu "
"instalacji."

#. type: Content of: <section><section><note><para>
#: en/installer.xml:200
msgid ""
"If somewhere during install you decide to stop the installation, it is "
"possible to reboot, but please think twice before you do this.  Once a "
"partition has been formatted or updates have started to be installed, your "
"computer is no longer in the same state and rebooting it could very well "
"leave you with an unusable system. If in spite of this you are very sure "
"rebooting is what you want, go to a text terminal by pressing the three keys "
"<guibutton>Alt Ctrl F2</guibutton> at the same time. After that, press "
"<guibutton>Alt Ctrl Delete</guibutton> simultaneously to reboot."
msgstr ""
"Jeśli w którymś momencie instalacji zdecydujesz się ją przerwać, istnieje "
"możliwość ponownego uruchomienia komputera, lecz należy sie nad tym poważnie "
"zastanowić. W chwili gdy partycje zostały już sformatowane lub rozpoczęła "
"się instalacja pakietów, twój komputer nie jest już w takim samym stanie jak "
"wcześniej, ponowne uruchomienie w tym momencie najprawdopodobniej spowoduje, "
"że system nie będzie zdatny do użytku. Jeśli masz pewność, że chcesz "
"ponownie uruchomić komputer, możesz przejśc do terminala tekstowego "
"wciskając jednocześnie klawisze<guibutton>Alt Ctrl F2</guibutton>. Następnie "
"zrebootuj komputer za pomocą klawiszy <guibutton>Alt Ctrl Delete</guibutton>."

#. type: Content of: <section><section><section><info><title>
#: en/installer.xml:215
msgid "Installation Problems and Possible Solutions"
msgstr "Problemy z instalacją oraz możliwe rozwiązania"

#. type: Content of: <section><section><section><section><info><title>
#: en/installer.xml:221
msgid "No Graphical Interface"
msgstr "Brak graficznego interfejsu"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/installer.xml:226
msgid ""
"After the initial screen you did not reach the language selection screen. "
"This can happen with some graphic cards and older systems. Try using low "
"resolution by typing <code>vgalo</code> at the prompt."
msgstr ""
"Po ekranie powitalnym nie wyświetla się ekran wyboru języka. To może się "
"zdarzyć dla niektórych kart graficznych lub starszych komputerów. Spróbuj "
"użyć niskiej rozdzielczości wpisując w linii komend <code>vgalo</code>."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/installer.xml:233
msgid ""
"If the hardware is very old, a graphical installation may not be possible. "
"In this case it is worth trying a text mode installation. To use this hit "
"ESC at the first welcome screen and confirm with ENTER. You will be "
"presented with a black screen with the word \"boot:\". Type \"text\" and hit "
"ENTER. Now continue with the installation in text mode."
msgstr ""

#. type: Content of: <section><section><section><section><info><title>
#: en/installer.xml:245
msgid "The Install Freezes"
msgstr "Zawieszenie się instalacji"

#. type: Content of: <section><section><section><section><para>
#: en/installer.xml:248
msgid ""
"If the system appeared to freeze during the installation, this may be a "
"problem with hardware detection. In this case the automatic detection of "
"hardware may be bypassed and dealt with later. To try this, type "
"<code>noauto</code> at the prompt. This option may also be combined with "
"other options as necessary."
msgstr ""
"Jeśli system zawiesi się podczas instalacji, może to oznaczać problem z "
"detekcją sprzętu. W tym przypadku automatyczna detekcja sprzętu może zostać "
"pominięta. Wpisz w linii komend <code>noauto</code>. Ta opcja może być "
"łączona z innymi opcjami jeśli zajdzie taka potrzeba."

#. type: Content of: <section><section><section><section><info><title>
#: en/installer.xml:257
msgid "RAM problem"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/installer.xml:260
msgid ""
"These will rarely be needed, but in some cases the hardware may report the "
"available RAM incorrectly. To specify this manually, you can use the "
"<code>mem=xxxM</code> parameter, where xxx is the correct amount of RAM. e."
"g. <code>mem=256M</code> would specify 256MB of RAM."
msgstr ""
"To są rzadkie przypadki, jednak czasem zdarza się, że system zgłasza "
"niepoprawnie ilość dostępnej pamięci RAM. Aby określić ją manualnie wpisz "
"parametr <code>mem=xxxM</code>, gdzie xxx jest poprawną ilością dostępnej "
"pamięci RAM wyrażoną w MB, np. <code>mem=256M</code> oznacza 256MB."

#. type: Content of: <section><section><section><section><info><title>
#: en/installer.xml:269
msgid "Dynamic partitions"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/installer.xml:272
msgid ""
"If you converted your hard disk from \"basic\" format to \"dynamic\" format "
"on Microsoft Windows, you must know that it is impossible to install Mageia "
"on this disc. To go back to a basic disk, see the Microsoft documentation: "
"<link ns2:href=\"http://msdn.microsoft.com/en-us/library/cc776315.aspx"
"\">http://msdn.microsoft.com/en-us/library/cc776315.aspx</link>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/installUpdates.xml:3
msgid "Updates"
msgstr "Aktualizacje"

#.  Made by marja on 2012 03 30 
#.  NEEDS TO BE REVIEWED! 
#.  marja 20120418 removed xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg"" from section tag, trying to restore correct html filename
#.  marja, 2012-04-24 added screenshot 
#. type: Content of: <section><mediaobject>
#: en/installUpdates.xml:13
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></imagedata> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></imagedata> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/installUpdates.xml:19
msgid ""
"Since this version of <application>Mageia</application> was released, some "
"packages will have been updated or improved."
msgstr ""
"Od czasu gdy ta wersja <application>Magei</application> została "
"udostępniona, niektóre pakiety zostały zaktualizowane lub poprawione."

#. type: Content of: <section><para>
#: en/installUpdates.xml:23
msgid ""
"Choose <guilabel>yes</guilabel> if you wish to download and install them, "
"select <guilabel>no</guilabel> if you don't want to do this now, or if you "
"aren't connected to the Internet"
msgstr ""
"Wybierz <guilabel>tak</guilabel> jeśli chcesz je pobrać i zainstalować, "
"wybierz <guilabel>nie</guilabel> jeśli nie chcesz tego teraz robić lub jeśli "
"nie masz połączenia z Internetem"

#. type: Content of: <section><para>
#: en/installUpdates.xml:28
msgid "Then press <guibutton>Next</guibutton> to continue"
msgstr "Kliknij <guibutton>Dalej</guibutton> aby kontynuować"

#. type: Content of: <section><info><title>
#: en/media_selection.xml:3
msgid "Media Selection (Nonfree)"
msgstr "Wybór nośników (Nonfree)"

#.  papoteur 2013-04-11  - created 
#.  marja 2013-04-16 added screenshot + made title longer (because it was the same as for add_supplemental_media)
#.  marja 2013-04-16 s/in/during/ as suggested by Tristan Campbell 
#. marja 2013-04-17 s/xml:id="media-selection"/xml:id="media_selection"/ (html filename was wrong)
#. type: Content of: <section><mediaobject>
#: en/media_selection.xml:12
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png"
"\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png"
"\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/media_selection.xml:18
msgid ""
"Here you have the list of available repositories. Not all repositories are "
"available, according to which media you use for installing. The repositories "
"selection determines which packages will be available for selection during "
"the next steps."
msgstr ""
"Tutaj jest lista dostępnych repozytoriów. Nie wszystkie repozytoria są "
"dostępne, zależy to od nośników jakie wykorzystujesz do instalacji. Wybór "
"repozytoriów ma wpływ na to jakie pakiety będzie można zainstalować w "
"następnych krokach."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:25
msgid ""
"The <emphasis>Core</emphasis> repository cannot be disabled as it contains "
"the base of the distribution."
msgstr ""
"Repozytorium <emphasis>Core</emphasis> nie może zostać wyłączone ponieważ "
"zawiera ono podstawowe pakiety dystrybucji."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:30
msgid ""
"The <emphasis>Nonfree</emphasis> repository includes packages that are free-"
"of-charge, i.e. Mageia may redistribute them, but they contain closed-source "
"software (hence the name - Nonfree). For example this repository includes "
"nVidia and ATI graphics card proprietary drivers, firmware for various WiFi "
"cards, etc."
msgstr ""
"Repozytorium <emphasis>Nonfree</emphasis> zawiera pakiety wolne od opłat, "
"które mogą być udostępniane przez Mageię, lecz zawierają oprogramowanie do "
"którego źródła nie są dostępne (stąd nazwa - Nonfree). To repozytorium "
"zawiera np. własnościowe sterowniki do kart graficznych nVidia oraz ATI, "
"firmware dla niektórych kart WIFI, itp."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:38
msgid ""
"The <emphasis>Tainted</emphasis> repository includes packages released under "
"a free license. The main criteria for placing packages in this repository is "
"that they may infringe patents and copyright laws in some countries, e.g. "
"Multimedia codecs needed to play various audio/video files; packages needed "
"to play commercial video DVD, etc."
msgstr ""
"Repozytorium <emphasis>Tainted</emphasis> zawiera pakiety wydane na wolnych "
"licencjach. Głównym powodem umieszczenia tych pakietów w tym repozytorium "
"jest fakt, że mogą one naruszać prawa patentowe w niektórych krajach, np. "
"kodeki multimedialne, pakiety potrzebne do odtwarzania komercyjnych płyt "
"DVD, itp."

#. type: Content of: <section><info><title>
#: en/minimal-install.xml:3
msgid "Minimal Install"
msgstr "Minimalna instalacja"

#. type: Content of: <section><para>
#: en/minimal-install.xml:9
msgid ""
"You can choose a Minimal Installation by de-selecting everything in the "
"Package Group Selection screen, see <xref linkend=\"choosePackageGroups\"></"
"xref>."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:10
msgid ""
"Minimal Installation is intended for those with specific uses in mind for "
"their <application>Mageia</application>, such as a server or a specialised "
"workstation. You will probably use this option combined with Manual Package "
"Selection, see <xref linkend=\"choosePackagesTree\"></xref>."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:14
msgid ""
"If you choose this installation class, then the related screen will offer "
"you a few useful extras to install, such as documentation and X."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/minimal-install.xml:19
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></imagedata> "
"</imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></imagedata> "
"</imageobject>"

#. type: Content of: <section><info><title>
#: en/misc-params.xml:3
msgid "Summary of miscellaneous parameters"
msgstr ""

#.  Started by marja on 2012 03 31 
#.  NEEDS TO BE WRITTEN AND REVIEWED! 
#. marja - 2012 04 15 added some text, not much, unfortunately :( 
#. marja 2012-04-24 added screenshots 
#. JohnR 2012-04-25 Added text as requested by Psec :-)
#. marja 2012-04-24 added 2 links to other help pages 
#. marja 2012-04-24 added some text in the drakxid-configureServices and 
#.       the drakxid-miscellaneous section 
#. marja 2012-04-24 corrected "Magaia" in the last paragraph 
#. marja 2012-04-24 corrected para xml:id number in the last paragraph 
#.  2012-05-01 marja - added You-Cheng Hsieh's section about IBus etc. 
#.  2012-08-09 marja - replaced linkend="setupBootloaderBeginner" by linkend="setupBootloader" 
#. 2012-12-25 marja - moved configureTimezoneUTC, selectCountry, configureServices and SecurityLevel out to separate files
#. type: Content of: <section><mediaobject>
#: en/misc-params.xml:33
msgid ""
"<imageobject> <imagedata fileref=\"dx2-summary.png\" revision=\"1\" align="
"\"center\" format=\"PNG\" xml:id=\"summary-im1\" /> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-summary.png\" revision=\"1\" align="
"\"center\" format=\"PNG\" xml:id=\"summary-im1\" /> </imageobject>"

#. type: Content of: <section><para>
#: en/misc-params.xml:38
msgid ""
"DrakX made smart choices for the configuration of your system depending on "
"the choices you made and on the hardware DrakX detected. You can check the "
"settings here and change them if you want after pressing "
"<guibutton>Configure</guibutton>."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:45
msgid "System parameters"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:50
msgid "<guilabel>Timezone</guilabel>"
msgstr "<guilabel>Strefa czasowa</guilabel>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:52
msgid ""
"DrakX selected a time zone for you, depending on your preferred language. "
"You can change it if needed. See also <xref linkend=\"configureTimezoneUTC\"/"
">"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:58
msgid "<guilabel>Country / Region</guilabel>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:61
msgid ""
"If you are not in the selected country, it is very important that you "
"correct the setting. See <xref linkend=\"selectCountry\"/>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:67
msgid "<guilabel>Bootloader</guilabel>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:69
msgid "DrakX has made good choices for the bootloader setting."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:72
msgid ""
"Do not change anything, unless you know how to configure Grub and/or Lilo"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:75
msgid "For more information, see <xref linkend=\"setupBootloader\"/>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:80
msgid "<guilabel>User management</guilabel>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:83
msgid ""
"You can add extra users here. They will each get their own <literal>/home</"
"literal> directories."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:89
msgid "<guilabel>Services</guilabel>:"
msgstr "<guilabel>Usługi</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:91
msgid ""
"System services refer to those small programs which run the background "
"(daemons). This tool allows you to enable or disable certain tasks."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:95
msgid ""
"You should check carefully before changing anything here - a mistake may "
"prevent your computer from operating correctly."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:99
msgid "For more information, see <xref linkend=\"configureServices\"/>"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:106
msgid "Hardware parameters"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:111
msgid "<guilabel>Keyboard</guilabel>:"
msgstr "<guilabel>Klawiatura</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:113
msgid ""
"This is where you setup or change your keyboard layout which will depend on "
"your location, language or type of keyboard."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:119
msgid "<guilabel>Mouse</guilabel>:"
msgstr "<guilabel>Mysz</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:121
msgid ""
"Here you can add or configure other pointing devices, tablets, trackballs "
"etc."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:126
msgid "<guilabel>Sound card</guilabel>:"
msgstr "<guilabel>Karta dźwiękowa</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:129
msgid ""
"The installer uses the default driver, if there is a default one. The option "
"to select a different driver is only given when there is more than one "
"driver for your card, but none of them is the default one."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:136
msgid "<guilabel>Graphical interface</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:139
msgid "This section allows you to configure your graphic card(s) and displays."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:142
msgid "For more information, see <xref linkend=\"configureX_chooser\"/>."
msgstr ""

#. type: Content of: <section><section><mediaobject>
#: en/misc-params.xml:148
msgid ""
"<imageobject> <imagedata xml:id=\"summaryBottom-im1\" revision=\"1\" align="
"\"center\" format=\"PNG\" fileref=\"dx2-summaryBottom.png\" /> </imageobject>"
msgstr ""
"<imageobject> <imagedata xml:id=\"summaryBottom-im1\" revision=\"1\" align="
"\"center\" format=\"PNG\" fileref=\"dx2-summaryBottom.png\" /> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:156
msgid "Network and Internet parameters"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:162
msgid "<guilabel>Network</guilabel>:"
msgstr "<guilabel>Sieć</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:164
msgid ""
"You can configure your network here, but for network cards with non-free "
"drivers it is better to do that after reboot, in the <application>Mageia "
"Control Center</application>, if you have not yet enabled the Nonfree media "
"repositories."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><warning><para>
#: en/misc-params.xml:171
msgid ""
"When you add a network card, do not forget to set your firewall to watch "
"that interface as well."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:178
msgid "<guilabel>Proxies</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:180
msgid ""
"A Proxy Server acts as an intermediary between your computer and the wider "
"internet.  This section allows you to configure your computer to utilize a "
"proxy service."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:185
msgid ""
"You may need to consult your systems administrator to get the parameters you "
"need to enter here"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:194
msgid "Security"
msgstr "Bezpieczeństwo"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:199
msgid "<guilabel>Security Level</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:202
msgid ""
"Here you set the Security level for your computer, in most cases the default "
"setting (Standard) is adequate for general use."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:206
msgid "Check the option which best suits your usage."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:211
msgid "<guilabel>Firewall</guilabel>:"
msgstr "<guilabel>Firewall</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:213
msgid ""
"A firewall is intended to be a barrier between your important data and the "
"rascals out there on the internet who would compromise or steal it."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:217
msgid ""
"Select the services that you wish to have access to your system. Your "
"selections will depend on what you use your computer for."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><warning><para>
#: en/misc-params.xml:222
msgid "Bear in mind that allowing everything (no firewall) may be very risky."
msgstr ""

#. type: Content of: <section><info><title>
#: en/resizeFATChoose.xml:16
msgid ""
"Resize <application>Windows<superscript>®</superscript></application> "
"partition"
msgstr ""

#. type: Content of: <section><para>
#: en/resizeFATChoose.xml:20
msgid ""
"You have more than one <application>Windows<superscript>®</superscript></"
"application> partition.  Choose which one should be made smaller to make "
"space for installing <application>Mageia</application>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/securityLevel.xml:12
msgid "Security Level"
msgstr "Poziom bezpieczeństwa"

#.  2012-12-25 marja - moved this part out of misc-params.xml" 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/securityLevel.xml:19
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/securityLevel.xml:24
msgid "You can adjust your security level here."
msgstr ""

#. type: Content of: <section><para>
#: en/securityLevel.xml:27
msgid ""
"Leave the default settings as they are, if you don't know what to choose."
msgstr ""

#. type: Content of: <section><para>
#: en/securityLevel.xml:30
msgid ""
"After install, it will always be possible to adjust your security settings "
"in the <guilabel>Security</guilabel> part of the Mageia Control Center."
msgstr ""

#. type: Content of: <section><info><title>
#: en/SelectAndUseISOs2.xml:4
msgid "Select and use ISOs"
msgstr ""

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:8
msgid "Media"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:11
msgid "Definition"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:13
msgid ""
"We call a media here a ISO image file that allows to install and/or update "
"Mageia and by extension any physical support where the ISO file is copied."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:17
msgid ""
"You can find them <link ns4:href=\"http://www.mageia.org/en/downloads/"
"\">here</link>."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:21
msgid "Classical installation media"
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:24 en/SelectAndUseISOs2.xml:92
#: en/SelectAndUseISOs2.xml:199
msgid "Common features"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:28
msgid "They use the traditional installer called drakx."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:32
msgid ""
"They are able to make a clean install or an update from previous releases."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:39
msgid "DVD"
msgstr "DVD"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:43 en/SelectAndUseISOs2.xml:107
#: en/SelectAndUseISOs2.xml:171 en/SelectAndUseISOs2.xml:189
#: en/SelectAndUseISOs2.xml:217
msgid "Different media for architecture 32 or 64 bits."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:47
msgid ""
"Some tools are available in the Welcome screen: Rescue System, Memory Test, "
"Hardware Detection Tool."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:52
msgid "Each DVD contains any available desktop environments and languages."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:57
msgid ""
"You'll be given the choice during the installation to add or not non free "
"software."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:64
msgid "DVD dual arch"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:68
msgid ""
"Both architectures are present on the same media, the choice is made "
"automatically according to the detected CPU."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:73
msgid "Xfce desktop only."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:77
msgid ""
"Some languages only (be, bg, ca, de, en, es, fr, it, mk, pl, pt, ru, sv, uk) "
"TO BE CHECKED!"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:82
msgid "It contains non free software."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:89
msgid "Live media"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:96
msgid ""
"Can be used to preview the distribution without first installing it on a "
"HDD, and optionally install Mageia on your HDD."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:102
msgid "ISO contains only one desktop environment (KDE or GNOME)."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:111
msgid ""
"<emphasis role=\"bold\">Live ISOs can only be used to create clean "
"installations, they cannot be used to upgrade from previous releases.</"
"emphasis>"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:117
msgid "They contains non free software."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:123
msgid "Live CD KDE"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:127 en/SelectAndUseISOs2.xml:163
msgid "KDE desktop environment only."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:131 en/SelectAndUseISOs2.xml:149
#: en/SelectAndUseISOs2.xml:221
msgid "English language only."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:135 en/SelectAndUseISOs2.xml:153
msgid "32 bits only."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:141
msgid "Live CD GNOME"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:145 en/SelectAndUseISOs2.xml:181
msgid "GNOME desktop environment only."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:159
msgid "Live DVD KDE"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:167 en/SelectAndUseISOs2.xml:185
msgid "All languages are present."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:177
msgid "Live DVD GNOME"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:196
msgid "Boot-only CDs media"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:203
msgid ""
"Each one is a small image that contains no more than that which is needed to "
"start the drakx installer and find the ISO file to continue and complete the "
"install. These ISO files may be on the PC hard disk, on a local drive, on a "
"local network or on the Internet."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:211
msgid ""
"These media are very light (less than 100 Mo) and are convenient when "
"bandwidth is too low to download a full DVD, PC without DVD drive or PC that "
"can't boot on a USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:227
msgid "boot.iso"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:231
msgid "Contains only free software, for people who refuse non free software."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:238
msgid "boot-nonfree.iso"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:242
msgid ""
"Contains non free software (mostly drivers, codecs...) for people who need "
"it."
msgstr ""

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:251
msgid "Media downloading and checking"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:254
msgid "Downloading"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:256
msgid ""
"Once you have chosen your ISO file, you can download it either using http or "
"BitTorrent. In both cases, a window give you some information, like the used "
"mirror and the possibility to change if the bandwidth is to low. If http is "
"chosen, you can also see something like"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:263
msgid ""
"<imageobject> <imagedata fileref=\"Checking.png\" contentwidth=\"650\"/> </"
"imageobject>"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:268
msgid ""
"md5sum and sha1sum are tools to check your ISO integrity. Use only one of "
"them. Both hexadecimal numbers have been calculated by an algorithm from the "
"file to be downloaded. If you ask this algorithm to calculate again this "
"number from your downloaded file, either you have the same number and your "
"downloaded file is correct, or the number is different and you met a "
"failure. Then this window appears:"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:276
msgid "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:281
msgid "Check the radio button Save File."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:285
msgid "Checking the downloaded media integrity"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:287
msgid "Open a console, no need to be root, and:"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:289
msgid ""
"- To use md5sum, type: [sam@localhost]$ <userinput>md5sum path/to/the/image/"
"file.iso</userinput>."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:292
msgid ""
"- To use sha1sum, type: [sam@localhost]$ <userinput>sha1sum path/to/the/"
"image/file.iso</userinput>."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:295
msgid ""
"and compare the obtained number on your computer (you may have to wait for a "
"while) with the number given by Mageia. Example:"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:299
msgid ""
"<imageobject> <imagedata fileref=\"Md5sum.png\" contentwidth=\"650\"/> </"
"imageobject>"
msgstr ""

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:309
msgid "Burn or dump the ISO"
msgstr ""

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:311
msgid ""
"The checked ISO can now be burned on a CD or DVD or dumped on a USB stick. "
"These operations are not a simple copy and aim at make a boot-able media."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:316
msgid "Burn the ISO on a CD/DVD"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:318
msgid ""
"Use whatever burner you want but ensure the burning device is set correctly "
"to <emphasis role=\"bold\">burn an image</emphasis>, burn data or files is "
"not correct.  More information in <link ns4:href=\"https://wiki.mageia.org/"
"en/Writing_CD_and_DVD_images\">the Mageia wiki</link>."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:324
msgid "Dump the ISO on a USB stick"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:326
msgid ""
"All Mageia ISOs are hybrid, which means you can 'dump' them on a USB stick "
"and use it to boot and install the system."
msgstr ""

#. type: Content of: <section><section><section><warning><para>
#: en/SelectAndUseISOs2.xml:330
msgid ""
"\"dumping\" an image onto a flash device destroys any prior file-system in "
"the partition; any data will be lost and partition capacity will be reduced "
"to the image size."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:335
msgid "To recover the original capacity, you have to format the USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:339
msgid "Using Mageia"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:341
msgid ""
"You can use a graphical tool like <link ns4:href=\"https://wiki.mageia.org/"
"en/IsoDumper_Writing_ISO_images_on_USB_sticks\">IsoDumper</link>"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:343
msgid "You can also use the dd tool in a console:"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:347
msgid "Open a console"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:351
msgid ""
"Become root with the command <userinput>su -</userinput> (don't forget the "
"final -)"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject>
#: en/SelectAndUseISOs2.xml:355
msgid ""
"<imageobject> <imagedata fileref=\"Root.png\" contentwidth=\"650\"/> </"
"imageobject>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:362
msgid ""
"Plug your USB stick (do not mount it, that means do not open any application "
"or file manager that read it)"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:367
msgid "Enter the command <userinput>fdisk -l</userinput>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject>
#: en/SelectAndUseISOs2.xml:370
msgid ""
"<imageobject> <imagedata fileref=\"Fdisk.png\" contentwidth=\"650\"/> </"
"imageobject>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:377
msgid ""
"Find the device name for your USB stick (by its size), for example /dev/sdb "
"in the screenshot above, it is a 8Go USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:383
msgid ""
"Enter the command: # <userinput>dd if=path/to/the/ISO/file of=/dev/sdX "
"bs=1M</userinput>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:386
msgid ""
"(x)=your device name eg: /dev/sdc Example: # <userinput>dd if=/home/user/"
"Downloads/Mageia-4-x86_64-DVD.iso of=/dev/sdb bs=1M</userinput>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:392
msgid "Enter the command: # <userinput>sync</userinput>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:396
msgid "Unplug your USB stick, it is done"
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:402
msgid "Using Windows"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:404
msgid "You can try:"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:406
msgid "- <link ns4:href=\"http://rufus.akeo.ie/?locale=en_US\">Rufus</link>"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:408
msgid ""
"- <link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 "
"Disk Imager</link>"
msgstr ""

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:416
msgid "Mageia Installation"
msgstr ""

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:418
msgid ""
"This step is detailed in <link ns4:href=\"http://www.mageia.org/en/doc/"
"\">the Mageia documentation</link>."
msgstr ""

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:420
msgid ""
"More information, is available in <link ns4:href=\"https://wiki.mageia.org/"
"en/Category:Documentation\">the Mageia wiki</link>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectCountry.xml:13
msgid "Select your Country / Region"
msgstr ""

#.  2012-12-25 marja - moved this section out of misc-params 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/selectCountry.xml:21
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-selectCountry.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"selectCountry-im1\"></imagedata> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-selectCountry.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"selectCountry-im1\"></imagedata> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/selectCountry.xml:27
msgid ""
"Select your country or region. This is important for all kinds of settings, "
"like the currency and wireless regulatory domain. Setting the wrong country "
"can lead to not being able to use a Wireless network."
msgstr ""

#. type: Content of: <section><para>
#: en/selectCountry.xml:32
msgid ""
"If your country isn't in the list, click the <guilabel>Other Countries</"
"guilabel> button and choose your country / region there."
msgstr ""

#. type: Content of: <section><note><para>
#: en/selectCountry.xml:37
msgid ""
"If your country is only in the <guilabel>Other Countries</guilabel> list, "
"after clicking <guibutton>OK</guibutton> it may seem a country from the "
"first list was chosen. Please ignore this, DrakX will follow your real "
"choice."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/selectCountry.xml:46
msgid "Input method"
msgstr ""

#. type: Content of: <section><section><para>
#: en/selectCountry.xml:49
msgid ""
"In the <guilabel>Other Countries</guilabel> screen you can also select an "
"input method (at the bottom of the list). Input methods allow users to input "
"multilingual characters (Chinese, Japanese, Korean, etc). IBus is the "
"default input method in Mageia DVDs, Africa/India and Asia/no-India Live-"
"CDs. For Asian and African locales, IBus will be set as default input method "
"so users should not need to configure it manually. Other input methods(SCIM, "
"GCIN, HIME, etc) also provide similar functions and can be installed if you "
"added HTTP/FTP media before package selection."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/selectCountry.xml:61
msgid ""
"If you missed the input method setup during installation, you can access it "
"after you boot your installed system via \"Configure your Computer\" -&gt; "
"\"System\", or by running localedrake as root."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectInstallClass.xml:21
msgid "Install or Upgrade"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/selectInstallClass.xml:25
msgid ""
"<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" align="
"\"center\" format=\"PNG\"></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" align="
"\"center\" format=\"PNG\"></imagedata> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:32
msgid "Install"
msgstr "Zainstaluj"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:34
msgid ""
"Use this option for a fresh <application>Mageia</application> installation."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:39
msgid "Upgrade"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:41
msgid ""
"If you have one or more <application>Mageia</application> installations on "
"your system, the installer will allow you to upgrade one of them to the "
"latest release."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><warning><para>
#: en/selectInstallClass.xml:45
msgid ""
"Only upgrading from a previous Mageia version that was <emphasis>still "
"supported</emphasis> when this installer's version was released, has been "
"thoroughly tested. If you want to upgrade a Mageia version that had already "
"reached its End\tOf Life when this one was released, then it is better to do "
"a clean install while preserving your <literal>/home</literal> partition."
msgstr ""

#. type: Content of: <section><note><para>
#: en/selectInstallClass.xml:56
msgid ""
"If during install you decide to stop the installation, it is possible to "
"reboot, but please think twice before you do this. Once a partition has been "
"formatted or updates have started to be installed, your computer isn't in "
"the same state anymore and rebooting it could very well leave you with an "
"unusable system. If in spite of that you are very sure rebooting is what you "
"want, go to a text terminal by pressing the three keys <guilabel>Alt Ctrl "
"F2</guilabel> at the same time. After that, press <guilabel>Alt Ctrl Delete</"
"guilabel> simultaneously to reboot."
msgstr ""

#. type: Content of: <section><tip><para>
#: en/selectInstallClass.xml:67
msgid ""
"If you have discovered that you forgot to select an additional language, you "
"can return from the \"Install or Upgrade\" screen to the language choice "
"screen by pressing <guilabel>Alt Ctrl Home</guilabel>. Do <emphasis>not</"
"emphasis> do this later in the install."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectKeyboard.xml:14
msgid "Keyboard"
msgstr "Klawiatura"

#. type: Content of: <section><para>
#: en/selectKeyboard.xml:17
msgid ""
"DrakX selects an appropriate keyboard for your language. If no suitable "
"keyboard is found it will default to a US keyboard layout."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/selectKeyboard.xml:22
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png"
"\" /> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png"
"\" /> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:30
msgid ""
"Make sure that the selection is correct or choose another keyboard layout. "
"If you don't know which layout your keyboard has, look in the specifications "
"that came with your system, or ask the computer vendor. There may even be a "
"label on the keyboard that identifies the layout. You can also look here: "
"<link xlink:href=\"http://en.wikipedia.org/wiki/Keyboard_layout\">en."
"wikipedia.org/wiki/Keyboard_layout</link>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:40
msgid ""
"If your keyboard isn't in the list shown, click on <guibutton>More</"
"guibutton> to get a full list, and select your keyboard there."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para><warning><para>
#: en/selectKeyboard.xml:45
msgid ""
"After choosing a keyboard from the <guibutton>More</guibutton> dialog, "
"you'll return to the first keyboard choice dialog and it will seem as though "
"a keyboard from that screen was chosen. You can safely ignore this anomaly "
"and continue the installation: Your keyboard is the one you chose from the "
"full list."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:55
msgid ""
"If you choose a keyboard based on non-Latin characters, you will see an "
"extra dialog screen asking how you would prefer to switch between the Latin "
"and non-Latin keyboard layouts"
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectLanguage.xml:23
msgid "Please choose a language to use"
msgstr "Wybór języka"

#. type: Content of: <section><para>
#: en/selectLanguage.xml:26
msgid ""
"Select your preferred language, by first expanding the list for your "
"continent. <application>Mageia</application> will use this selection during "
"the installation and for your installed system."
msgstr ""
"Wybierz preferowany język, najpierw rozwijając listę dla swojego kontynentu. "
"<application>Mageia</application> będzie używać wybranego języka zarówno "
"podczas instalacji jak i w zainstalowanym systemie."

#. type: Content of: <section><para>
#: en/selectLanguage.xml:30
msgid ""
"If it is likely that you will require several languages installed on your "
"system, for yourself or other users, then you should use the "
"<guibutton>Multiple languages</guibutton> button to add them now. It will be "
"difficult to add extra language support after installation."
msgstr ""
"Jeśli potrzebujesz mieć kilka języków zainstalowanych w systemie, dla siebie "
"lub innych użytkowników, możesz użyć przycisku <guibutton>Więcej języków</"
"guibutton> aby je teraz dodać.  "

#. type: Content of: <section><mediaobject>
#: en/selectLanguage.xml:36
msgid ""
"<imageobject> <imagedata fileref=\"dx2-selectLanguage.png\" align=\"center\" "
"format=\"PNG\" > </imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-selectLanguage.png\" align=\"center\" "
"format=\"PNG\" > </imagedata> </imageobject>"

#. type: Content of: <section><warning><para>
#: en/selectLanguage.xml:44
msgid ""
"Even if you choose more than one language, you must first choose one of them "
"as your preferred language in the first language screen. It will also be "
"marked as chosen in the multiple languages screen ."
msgstr ""
"Nawet jeśli chcesz zainstalować więcej niż jeden język, musisz najpierw "
"wybrać jeden z nich jako domyślny w głównym oknie wyboru języka. Będzie on "
"również zaznaczony jako domyślny w oknie wyboru wielu języków."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:51
msgid ""
"If your keyboard language is not the same as your preferred language, then "
"it is advisable to install the language of your keyboard as well."
msgstr ""
"Jeśli język twojej klawiatury nie jest taki sam jak język, który wybierasz "
"jako domyślny, należy zainstalować także język odpowiedni do twojej "
"klawiatury."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:57
msgid ""
"Mageia uses UTF-8 (Unicode) support by default. This may be disabled in the "
"\"multiple languages\" screen if you know that it is inappropriate for your "
"language. Disabling UTF-8 applies to all installed languages."
msgstr ""
"Mageia używa domyślnie kodowania UTF-8 (Unikod). Jeśli wiesz, że to "
"kodowanie nie jest odpowiednie dla twojego języka, możesz wyłączyć wsparcie "
"dla UTF-8 w oknie \"więcej języków\". Będzie to dotyczyć wszystkich "
"zainstalowanych języków."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:64
msgid ""
"You can change the language of your system after installation in the Mageia "
"Control Center -&gt; System -&gt; Manage localization for your system."
msgstr ""
"Po instalacji możesz zmienic domyslny język uzywany w systemie za pomocą "
"Centrum Sterowania Mageia -> System -> Zarządzanie lokalizacją systemu"

#. type: Content of: <section><info><title>
#: en/selectMouse.xml:4
msgid "Select mouse"
msgstr "Wybierz mysz"

#.  Made by marja on 2012 04 11 
#.  NEEDS TO BE REVIEWED! 
#.  adding some "real" text now that we know the page shows up in the right place
#.  marja 2012-04-24 adding screenshot 
#. type: Content of: <section><mediaobject>
#: en/selectMouse.xml:16
msgid ""
"<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" "
"format=\"PNG\" > </imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" "
"format=\"PNG\" > </imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/selectMouse.xml:23
msgid ""
"If you are not happy with how your mouse responds, you can select a "
"different one here."
msgstr ""

#. type: Content of: <section><para>
#: en/selectMouse.xml:25
msgid ""
"Usually, <guilabel>Universal</guilabel> - <guilabel>Any PS/2 and USB mice</"
"guilabel> is a good choice."
msgstr ""

#. type: Content of: <section><para>
#: en/selectMouse.xml:27
msgid ""
"Select <guilabel>Universal</guilabel> - <guilabel>Force evdev</guilabel> to "
"configure the buttons that do not work on a mouse with six or more buttons."
msgstr ""

#. type: Content of: <section><info><title>
#: en/setupBootloaderAddEntry.xml:3
msgid "Add or Modify a Boot Menu Entry"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/setupBootloaderAddEntry.xml:8
#, fuzzy
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-"
"bootloaderConfiguration.png\" align=\"center\" format=\"PNG\" xml:id="
"\"bootloaderConfiguration-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-"
"bootloaderConfiguration.png\" format=\"PNG\" align=\"center\" xml:id="
"\"bootloaderConfiguration-im1\"></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:13
msgid ""
"You can add an entry or modify the one you select first, by pressing the "
"relevant button in the <emphasis>Bootloader Configuration</emphasis> screen "
"and editing the screen that pops up on top of it."
msgstr ""

#. type: Content of: <section><note><para>
#: en/setupBootloaderAddEntry.xml:18
msgid ""
"If you have chosen <code>Grub 2</code> as your bootloader, you cannot use "
"this tool to edit entries at this step, press 'Next'. You need to manually "
"edit <code>/boot/grub2/custom.cfg</code> or use <code>grub-customizer</code> "
"instead."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/setupBootloaderAddEntry.xml:25
#, fuzzy
msgid ""
"<imageobject> <imagedata revision=\"1\" xml:id=\"setupBootloaderAddEntry-"
"im1\" align=\"center\" format=\"PNG\" fileref=\"dx2-setupBootloaderAddEntry."
"png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-"
"setupBootloaderAddEntry.png\" format=\"PNG\" align=\"center\" xml:id="
"\"setupBootloaderAddEntry-im1\"></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:30
msgid ""
"Some things that can be done without any risk, are changing the label of an "
"entry and ticking the box to make an entry the default one."
msgstr ""

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:33
msgid ""
"You can add the proper version number of an entry, or rename it completely."
msgstr ""

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:36
msgid ""
"The default entry is the one the systems boots into if you don't make a "
"choice while booting up."
msgstr ""

#. type: Content of: <section><warning><para>
#: en/setupBootloaderAddEntry.xml:40
msgid ""
"Editing other things can leave you with an unbootable system. Please don't "
"just try something without knowing what you are doing."
msgstr ""

#. type: Content of: <section><info><title>
#: en/setupBootloader.xml:3
msgid "Bootloader main options"
msgstr "Podstawowe opcje programu rozruchowego"

#.  2012-08-12 Copied this page, setupBootloader.xml,  from setupBootloaderBeginner.xml and REMOVED the string "Beginner" everywhere, except in this sentence.  
#.  2013-3-30 Removed refernce to bootloader expert page and suggest using grub2 where other grub2 systems exist
#. type: Content of: <section><mediaobject>
#: en/setupBootloader.xml:11
msgid ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" fileref=\"dx2-"
"setupBootloader.png\" xml:id=\"setupBootloader-im1\" format=\"PNG\" /> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" fileref=\"dx2-"
"setupBootloader.png\" xml:id=\"setupBootloader-im1\" format=\"PNG\" /> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/setupBootloader.xml:16
msgid ""
"If you prefer different bootloader settings to those chosen automatically by "
"the installer, you can change them here."
msgstr ""

#. type: Content of: <section><para>
#: en/setupBootloader.xml:20
msgid ""
"You may already have another operating system on your machine, in which case "
"you need to decide whether to add Mageia to your existing bootloader, or "
"allow Mageia to create a new one."
msgstr ""

#. type: Content of: <section><tip><para>
#: en/setupBootloader.xml:26
msgid "The Mageia graphical menus are nice :)"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/setupBootloader.xml:32
msgid "Using a Mageia bootloader"
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:36
msgid ""
"By default, Mageia writes a new GRUB (legacy) bootloader into the MBR "
"(Master Boot Record) of your first hard drive. If you already have other "
"operating systems installed, Mageia attempts to add them to your new Mageia "
"boot menu."
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:41
msgid ""
"Mageia now also offers GRUB2 as an optional bootloader in addition to GRUB "
"legacy and Lilo."
msgstr ""

#. type: Content of: <section><section><warning><para>
#: en/setupBootloader.xml:45
msgid ""
"Linux systems which use the GRUB2 bootloader are not currently supported by "
"GRUB (legacy) and will not be recognised if the default GRUB bootloader is "
"used."
msgstr ""

#. type: Content of: <section><section><warning><para>
#: en/setupBootloader.xml:49
msgid ""
"The best solution here is to use the GRUB2 bootloader which is available at "
"the Summary page during installation."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/setupBootloader.xml:56
msgid "Using an existing bootloader"
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:60
msgid ""
"If you decide to use an existing bootloader then you will need to remember "
"to STOP at the summary page during the installation and click the Bootloader "
"<guibutton>Configure</guibutton> button, which will allow you to change the "
"bootloader install location."
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:66
msgid ""
"Do not select a device e.g.\"sda\", or you will overwrite your existing MBR. "
"You must select the root partition that you chose during the partitioning "
"phase earlier, e.g.  sda7."
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:71
msgid "To be clear, sda is a device, sda7 is a partition on that device."
msgstr ""

#. type: Content of: <section><section><tip><para>
#: en/setupBootloader.xml:75
msgid ""
"Go to tty2 with Ctrl+Alt+F2 and type <literal>df</literal> to check where "
"your <literal>/</literal> (root) partition is. Ctrl+Alt+F7 takes you back to "
"the installer screen."
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:81
msgid ""
"The exact procedure for adding your Mageia system to an existing bootloader "
"is beyond the scope of this help, however in most cases it will involve "
"running the relevant bootloader installation program which should detect and "
"add it automatically. See the documentation for the operating system in "
"question."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/setupBootloader.xml:91
msgid "Bootloader advanced option"
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:95
msgid ""
"If you have very limited disk space for the <literal>/</literal> partition "
"that contains <literal>/tmp</literal>, click on <guibutton>Advanced</"
"guibutton> and check the box for <guilabel>Clean /tmp at each boot</"
"guilabel>. This helps to maintain some free space."
msgstr ""

#. type: Content of: <section><info><title>
#: en/setupSCSI.xml:11
msgid "Setup SCSI"
msgstr ""

#.  Made by marja on 2012 04 02 
#.  NEEDS TO BE REVIEWED! 
#.  JohnR - edited 2012-03-03 
#.  SimonNZG has reviewed 2012-04-03 (changed editted to edited in JohnR's comment ;-) 
#.  barjac has re-reviewed and made some minor tweaks. Revisions incremented. 
#.  marja 2012-04-24 added screenshot 
#.  marja 2012-04-25 replacing John's version 1.6 because that one was based on the
#.        Mdv doc instead of on our setupSCSI file 
#. type: Content of: <section><mediaobject>
#: en/setupSCSI.xml:26
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" format="
"\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" format="
"\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/setupSCSI.xml:32
msgid ""
"DrakX usually detects hard disks correctly. With some older SCSI controllers "
"it may be unable to determine the correct drivers to use and subsequently "
"fail to recognise the drive."
msgstr ""

#. type: Content of: <section><para>
#: en/setupSCSI.xml:36
msgid ""
"If this happens, you will need to manually tell Drakx which SCSI drive(s) "
"you have."
msgstr ""

#. type: Content of: <section><para>
#: en/setupSCSI.xml:39
msgid "DrakX should then be able to configure the drive(s) correctly."
msgstr ""

#. type: Content of: <section><info><title>
#: en/soundConfig.xml:11
msgid "Sound Configuration"
msgstr "Konfiguracja dźwięku"

#.  Started by marja on 2013-12-07 
#. type: Content of: <section><mediaobject>
#: en/soundConfig.xml:17
msgid ""
"<imageobject> <imagedata fileref=\"dx2-soundConfig.png\" revision=\"1\" "
"format=\"PNG\" xml:id=\"soundConfig-im1\" /> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-soundConfig.png\" revision=\"1\" "
"format=\"PNG\" xml:id=\"soundConfig-im1\" /> </imageobject>"

#. type: Content of: <section><para>
#: en/soundConfig.xml:23
msgid ""
"In this screen the name of the driver that the installer chose for your "
"sound card is given, which will be the default driver if we have a default "
"one."
msgstr ""

#. type: Content of: <section><para>
#: en/soundConfig.xml:27
msgid ""
"The default driver should work without problems. However, if after install "
"you do encounter problems, then run <command>draksound</command> or start "
"this tool via MCC (Mageia Control Center), by choosing the "
"<guilabel>Hardware</guilabel> tab and clicking on <guilabel>Sound "
"Configuration</guilabel> at the top right of the screen."
msgstr ""

#. type: Content of: <section><para>
#: en/soundConfig.xml:33
msgid ""
"Then, in the draksound or \"Sound Configuration\" tool screen, click on "
"<guibutton>Advanced</guibutton> and then on <guibutton>Troubleshooting</"
"guibutton> to find very useful advice about how to solve the problem."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/soundConfig.xml:41
msgid "Advanced"
msgstr "Zaawansowane"

#. type: Content of: <section><section><para>
#: en/soundConfig.xml:44
msgid ""
"Clicking <guibutton>Advanced</guibutton> in this screen, during install, is "
"useful if there is no default driver and there are several drivers "
"available, but you think the installer selected the wrong one."
msgstr ""

#. type: Content of: <section><section><para>
#: en/soundConfig.xml:49
msgid ""
"In that case you can select a different driver after clicking on "
"<guibutton>Let me pick any driver</guibutton>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/takeOverHdConfirm.xml:4
msgid "Confirm hard disk to be formatted"
msgstr ""

#.  Made by marja on 2012 04 03 
#.  test comment - johnr 
#.  2012-04-24 marja - replaced "if you are not sure you selected the correct
#.     hard disk." with "if you are not sure about your choice", because I'm sure I
#.     saw this help screen when I had only one HD 
#.  2013-05-05 marja added screenshot 
#. type: Content of: <section><mediaobject>
#: en/takeOverHdConfirm.xml:19
msgid ""
"<imageobject> <imagedata fileref=\"dx2-takeOverHdConfirm.png\" format=\"PNG"
"\" align=\"center\" ></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-takeOverHdConfirm.png\" format=\"PNG"
"\" align=\"center\" ></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/takeOverHdConfirm.xml:24
msgid ""
"Click on <guibutton>Previous</guibutton> if you are not sure about your "
"choice."
msgstr ""

#. type: Content of: <section><para>
#: en/takeOverHdConfirm.xml:27
msgid ""
"Click on <guibutton>Next</guibutton> if you are sure and want to erase every "
"partition, every operating system and all data on that hard disk."
msgstr ""