Velg og bruk ISOer
Introduksjon Mageia distribuers som ISO bilder. Denne siden vil hjelpe deg til å velge hvilket bilde som passer dine behov. Det er to typer media: Classical installer: After booting the media, it will follow a process allowing to choose what to install and how to configure your target system. This give you the maximal flexibility for a customized installation, in particular to choose which Desktop Environment you will install. LIVE media: you can boot the media in a real Mageia system without installing it, to see what you will get after installation. The installation process is simpler, but you get lesser choices. Details are given in the next sections.
Media
Definisjon Here, a medium (plural: media) is an ISO image file that allows you to install and/or update Mageia and by extension any physical support the ISO file is copied to. Du kan finne dem her.
Klassisk installasjonsmedia
Felles egenskaper Disse ISOene bruker den tradisjonelle installereren, DrakX. De kan enten gjøre en ren installasjon eller oppgrader fra en tidligere versjon.
DVD Forskjellige media for 32 eller 64 biters arkitektur. Some tools are available in the Welcome screen: Rescue System, Memory Test, Hardware Detection Tool. Each DVD contains many available desktop environments and languages. You'll be given the choice during the installation to add non free software.
Live media
Felles egenskaper Can be used to preview the distribution without installing it on a HDD, and optionally install Mageia on to your HDD. Each ISO contains only one desktop environment (KDE, GNOME or Xfce). Forskjellige media for 32 eller 64 biters arkitektur. Live ISOs can only be used to create clean installations, they cannot be used to upgrade from previous releases. They contain non free software.
Live DVD Plasma Kun Plasma desktop. Alle språk er tilgjengelige Forskjellige media for 32 eller 64 biters arkitektur.
Live DVD GNOME Kun GNOME desktop. Alle språk er tilgjengelige Forskjellige media for 32 eller 64 biters arkitektur.
Live DVD Xfce Kun Xfce desktop. Alle språk er tilgjengelige Forskjellige media for 32 eller 64 biters arkitektur.
Kun oppstarts CD media
Felles egenskaper Each one is a small image that contains no more than that which is needed to start the drakx installer and find drakx-installer-stage2 and other packages that are needed to continue and complete the install. These packages may be on the PC hard disk, on a local drive, on a local network or on the Internet. These media are very light (less than 100 MB) and are convenient when bandwidth is too low to download a full DVD, a PC without a DVD drive or a PC that can't boot from a USB stick. Forskjellige media for 32 eller 64 biters arkitektur. Kun Engelsk.
netinstall.iso Inneholder bare fri programvare for de som nekter å bruke ikke-fri programvare.
netinstall-nonfree.iso Inneholder ikke-fri programvare (mest drivere og multimedia kodeks) for de som trenger det.
Laster ned og kontrollerer media.
Laster ned Once you have chosen your ISO file, you can download it using either http or BitTorrent. In both cases, a window gives you some information, such as the mirror in use and the possibility to change if the bandwidth is to low. If http is chosen, you may also see something like md5sum and sha1sum are tools to check the ISO integrity. Use only one of them. Keep one of them for further usage. Then this window appears: Klikk radioknappen Lagre Fil.
Kontrollerer integriteten til det nedlastede medium Both checksums are hexadecimal numbers calculated by an algorithm from the file to be downloaded. When you ask these algorithms to recalculate this number from your downloaded file, either you have the same number and your downloaded file is correct, or the number is different and you have a failure. A failure infers that you should retry the download or attempt a repair using BitTorrent. Åpne et konsollvindu, du trenger ikke være root og: - For å bruke md5sum, type: [sam@localhost]$ md5sum path/to/the/image/file.iso. - For å bruke sha1sum, type: [sam@localhost]$ sha1sum path/to/the/image/file.iso. and compare the obtained number on your computer (you may have to wait for a while) with the number given by Mageia. Example:
Brenn eller dump ISOen The checked ISO can now be burned to a CD or DVD or dumped to a USB stick. These operations are not a simple copy and aim to make a bootable medium.
Brenner ISO til en CD/DVD Use whatever burner you wish but ensure the burning device is set correctly to burn an image, burn data or files is not correct. There is more information in the Mageia wiki.
Dumper ISOen til en USB disk All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick and then use it to boot and install the system. "Dumping" an image onto a flash device destroys any previous file-system on the device; any other data will be lost and the partition capacity will be reduced to the image size. To recover the original capacity, you must redo partitioning and re-format the USB stick.
Bruker et grafisk verktøy inne i Mageia Du kan bruke et grafisk verktøy som IsoDumper
Bruker et grafisk verktøy i Windows Du kan prøve: - Rufus bruke "ISO bildet" alternativet; - Win32 Disk Imager
Å bruke kommandolinje i et GNU/Linux system It is potentially *dangerous* to do this by hand. You risk to overwrite a disc partition if you get the device-ID wrong. Du kan også bruke dd verktøyet i en konsoll: Åpne et konsollsvindu Bli root med kommandoen su - (ikke glem '-' på slutten) Plug in your USB stick (do not mount it, this also means do not open any application or file manager that could access or read it) Skriv inn komandoen fdisk -l Alternatively, you can get the device name with the command dmesg: at end, you see the device name starting with sd, and sdd in this case: [72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd [72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000 [72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [72594.770536] usb 1-1: Product: Mass Storage Device [72594.770537] usb 1-1: Manufacturer: JetFlash [72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB [72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected [72594.772447] scsi host8: usb-storage 1-1:1.0 [72595.963238] scsi 8:0:0:0: Direct-Access JetFlash Transcend 2GB 1100 PQ: 0 ANSI: 4 [72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB) [72595.964104] sd 8:0:0:0: [sdd] Write Protect is off [72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00 [72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found [72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through [72595.967251] sdd: sdd1 [72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk Find the device name for your USB stick (by its size), for example /dev/sdb in the screenshot above, it is a 8GB USB stick. Skriv inn kommandoen: # dd if=path/to/the/ISO/file of=/dev/sdX bs=1M Hvor X=enhetsnavnet feks: /dev/sdc Eksempel: # dd if=/home/user/Downloads/Mageia-4-x86_64-DVD.iso of=/dev/sdb bs=1M Skriv inn kommandoen: # sync Ferdig, ta ut USB disken.