# SOME DESCRIPTIVE TITLE
# Copyright (C) YEAR Mageia
# This file is distributed under the same license as the Mageia Installer Help package.
#
# Translators:
# Balzamon, 2015
# Balzamon, 2015,2017
# Egy G <takacsgergely.soundman@gmail.com>, 2017
# gergo huba <hubasetech@gmail.com>, 2016
# Kardos László <lacesz@ox.io>, 2017
# Kardos László <lacesz@ox.io>, 2017
# Kardos László <lacesz@ox.io>, 2017
# Zsolt Bölöny <bolony.zsolt@gmail.com>, 2013
msgid ""
msgstr ""
"Project-Id-Version: Mageia\n"
"Report-Msgid-Bugs-To: doc-discuss@ml.mageia.org\n"
"POT-Creation-Date: 2017-06-25 20:39+0300\n"
"PO-Revision-Date: 2017-10-28 23:02+0000\n"
"Last-Translator: Kardos László <lacesz@ox.io>\n"
"Language-Team: Hungarian (http://www.transifex.com/MageiaLinux/mageia/"
"language/hu/)\n"
"Language: hu\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#. type: Content of: <section><info><title>
#: en/acceptLicense.xml:25
msgid "License and Release Notes"
msgstr "Licenc és Kiadási megjegyzések"

#. type: Content of: <section><mediaobject>
#: en/acceptLicense.xml:29
msgid ""
"<imageobject condition=\"classical\"> <imagedata xml:id=\"acceptLicense-"
"im1\" revision=\"4\" align=\"center\" format=\"PNG\" fileref=\"dx2-license."
"png\"/> </imageobject> <imageobject> <imagedata xml:id=\"acceptLicense-im2\" "
"revision=\"5\" align=\"center\" condition=\"live\" format=\"PNG\" fileref="
"\"live-license.png\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata xml:id=\"acceptLicense-"
"im1\" revision=\"4\" align=\"center\" format=\"PNG\" fileref=\"dx2-license."
"png\"/> </imageobject> <imageobject> <imagedata xml:id=\"acceptLicense-im2\" "
"revision=\"5\" align=\"center\" condition=\"live\" format=\"PNG\" fileref="
"\"live-license.png\"/> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/acceptLicense.xml:40
msgid "License Agreement"
msgstr "Licencegyezmény"

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:43
msgid ""
"Before installing <application>Mageia</application>, please read the license "
"terms and conditions carefully."
msgstr "Mielőtt telepítené a Mageiát kérjük olvassa el a licenc feltételeket."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:46
msgid ""
"These terms and conditions apply to the entire <application>Mageia</"
"application> distribution and must be accepted before you can continue."
msgstr ""
"A feltételek a <application>Mageia</application> rendszerre vonatkoznak "
"folytatás előtt kattintson az alkalmaz gombra."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:50
msgid ""
"To accept, simply select <guilabel>Accept</guilabel> and then click on "
"<guibutton>Next</guibutton>."
msgstr ""
"Az elfogadáshoz válassza az <guilabel>elfogadom</guilabel> lehetőséget és "
"kattintson a <guibutton>tovább</guibutton> gombra. "

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:53
msgid ""
"If you decide not to accept these conditions, then we thank you for looking. "
"Clicking <guibutton>Quit</guibutton> will reboot your computer."
msgstr ""
"Ha még is úgy dönt, hogy ezeket a feltételeket nem fogadja el  akkor "
"kattintson a <guibutton>kilépés</guibutton> gombra és a számítógép újraindul."

#. type: Content of: <section><section><info><title>
#: en/acceptLicense.xml:63
msgid "Release Notes"
msgstr "Kiadási megjegyzések"

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:70
msgid ""
"Important information are given about this release of <application>Mageia</"
"application> and are accessible clicking on the <guibutton>Release Notes</"
"guibutton> button."
msgstr ""
"A <application>Mageiáról</application> Fontos információk érhetők el ha "
"rákattint a <guibutton>megjegyzések</guibutton> gombra."

#. type: Attribute 'xml:lang' of: <section>
#: en/add_supplemental_media.xml:2 en/DrakLive-cover.xml:2 en/DrakLive.xml:1
#: en/DrakX-cover.xml:2 en/DrakX.xml:1 en/media_selection.xml:1
msgid "en"
msgstr "hu"

#. type: Content of: <section><info><title>
#: en/add_supplemental_media.xml:10
msgid "Media Selection (Configure Supplemental Installation Media)"
msgstr ""
"Média kiválasztás (Kiegészítő media csomagok telepítése és konfigurálása)"

#.  papoteur 2013-04-13  - created 
#.  marja 2013-04-16 added screenshot and expanded title (because is was the same as for media_selection 
#.  marja 2013-04-16 s/a optical/an optcal/ s/support/disc/ s/or or/or/ s/at/during/ as suggested by Tristan Campbell 
#. type: Content of: <section><mediaobject>
#: en/add_supplemental_media.xml:18
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-"
"add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-"
"add_supplemental_media-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-"
"add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-"
"add_supplemental_media-im1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/add_supplemental_media.xml:24
msgid ""
"This screen gives you the list of already recognized repositories. You can "
"add other sources for packages, like an optical disc or a remote source. The "
"source selection determines which packages will be available for selection "
"during the next steps."
msgstr ""
"Ez az ablak megjeleníti a mostani szoftvercomagokat mutatja. Ha hozzá kíván "
"adni szoftvercsomagokat más forrásból akkor megteheti lemezről vagy más "
"egyébb forrásból. A forrás kiválasztása határozza meg, hogy későbbiekben "
"milyen csomagok állnak a rendelkezésére."

#. type: Content of: <section><para>
#: en/add_supplemental_media.xml:29
msgid "For a network source, there are two steps to follow:"
msgstr "Hálózati forrás esetén két lépésre lesz szükség."

#. type: Content of: <section><orderedlist><listitem><para>
#: en/add_supplemental_media.xml:33
msgid "Choosing and activation of the network, if not already up."
msgstr "Először is a hálózati kapcsolat kiválasztása és aktiválása."

#. type: Content of: <section><orderedlist><listitem><para>
#: en/add_supplemental_media.xml:37
msgid ""
"Selecting a mirror or specifying a URL (very first entry). By selecting a "
"mirror, you have access to the selection of all repositories managed by "
"Mageia, like the Nonfree , the Tainted repositories and the Updates. With "
"the URL, you can designate a specific repository or your own NFS "
"installation."
msgstr ""
"Válasszuk ki a nekünk megfelelő tükört vagy a kívánt URL -t (első "
"bejegyzésként).  A tükör kiválasztásásval hozzáférhet a Mageia összes "
"csomagjához és forrásához. Ilyen forrás lehet a nonfree és egyébb más "
"források. Egy URL címmel kiválaszthatunk egy adott szofver forrást vagy "
"saját NFS -t telepíthetünk."

#. type: Content of: <section><note><para>
#: en/add_supplemental_media.xml:46
msgid ""
"If you are updating a 64 bit installation which may contain some 32 bit "
"packages, it is advised to use this screen to add an online mirror by "
"ticking one of the Network protocols here. The 64 bit DVD iso only contains "
"64 bit and noarch packages, it will not be able to update the 32 bit "
"packages. However, after adding an online mirror, installer will find the "
"needed 32 bit packages there."
msgstr ""
"Ha frissít egy 64 bites csomagot akkor a frissítés tartalmazhat 32 bites "
"csomagokat is. Ezért javasoljuk, hogy online tükörhozzá adásával frissítsen, "
"Itt választhat a hálózati protokolok közül. A 64 bites DVD ISO -val csak 64 "
"bites és noarch csomagokat tudd frissíteni. De a kiválasztott internetes "
"tükörrel 32 bites csomagokat is tudd telepíteni,"

#. type: Content of: <section><info><title>
#: en/addUser.xml:3
msgid "User and Superuser Management"
msgstr "Felhasználó és rendszergazda útmutató."

#.  Lebarhon: 20170210 updated for Mageia 6 (umask)
#. type: Content of: <section><mediaobject>
#: en/addUser.xml:7
msgid ""
"<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref="
"\"dx2-setRootPassword.png\" align=\"center\" revision=\"1\" xml:id="
"\"setRootPassword-im1\"/> </imageobject> <imageobject> <imagedata format="
"\"PNG\" fileref=\"live-user1.png\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref="
"\"dx2-setRootPassword.png\" align=\"center\" revision=\"1\" xml:id="
"\"setRootPassword-im1\"/> </imageobject> <imageobject> <imagedata format="
"\"PNG\" fileref=\"live-user1.png\"/> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:16
msgid "Set Administrator (root)  Password:"
msgstr "A rendszergazdai (root) jelszó beállítása"

#. type: Content of: <section><section><para>
#: en/addUser.xml:19
msgid ""
"It is advisable for all <application>Mageia</application> installations to "
"set a superuser or administrator's password, usually called the "
"<emphasis>root password</emphasis> in Linux. As you type a password into the "
"top box the colour of its shield will change from red to yellow to green "
"depending on the strength of the password. A green shield shows you are "
"using a strong password. You need to repeat the same password in the box "
"just below the first password box, this checks that you have not mistyped "
"the first password by comparing them."
msgstr ""
"Fontos, hogy a <application>Mageiánkba</application>magasabb szintű  "
"felhasználó vagy egy rendszergazda legyen. A Mageiában telepítéskor "
"<emphasis>root jelszót</emphasis> kell megadni. Root jelszót a Linuxnál "
"rendszergazdai jelszónak nevezik. A root jelszó beírásakor a pajzs szine "
"piros, sárga és zöld  színüre változik ez a jelszó erősségétől függ. A zöld "
"pajsz azt jelenti, hogy a jelszó erős. Ezt a jelszót mégegyszer be kell írni "
"az alsó mezőbe azért, hogy biztossan nem tévesztettünk el egy karaktert se."

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:28
msgid ""
"All passwords are case sensitive, it is best to use a mixture of letters "
"(upper and lower case), numbers and other characters in a password."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:35
msgid "Enter a user"
msgstr "Adjon meg egy felhasználót"

#. type: Content of: <section><section><para>
#: en/addUser.xml:37
msgid ""
"Add a user here. A user has fewer rights than the superuser (root), but "
"enough to use the internet, office applications or play games and anything "
"else the average user does with his computer"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:40
msgid ""
"<guibutton>Icon</guibutton>: if you click on this button it will change the "
"user's icon."
msgstr ""
"<guibutton>Ikon</guibutton>: Ha erre a gombra kattint akkor a felhasználók "
"ikonja megváltozik."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:43
msgid ""
"<guilabel>Real Name</guilabel>: Insert the user's real name into this text "
"box."
msgstr "<guilabel>Igazi Név</guilabel>: Adja meg a felhasználó igazi nevét."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:46
msgid ""
"<guilabel>Login Name</guilabel>: Here you enter the user login name or let "
"drakx use a version of the user's real name. <emphasis>The login name is "
"case sensitive.</emphasis>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:50
msgid ""
"<guilabel>Password</guilabel>: In this text box you should type in the user "
"password. There is a shield at the end of the text box that indicates the "
"strength of the password. (See also <xref linkend=\"givePassword\"/>)"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:55
msgid ""
"<guilabel>Password (again)</guilabel>: Retype the user password into this "
"text box and drakx will check you have the same password in each of the user "
"password text boxes."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:61
msgid ""
"Any user you add while installing Mageia, will have a both read and write "
"protected home directory (umask=0027)."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:63
msgid ""
"You can add all extra needed users in the <emphasis>Configuration - Summary</"
"emphasis> step during the install. Choose <emphasis>User management</"
"emphasis>."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:66
msgid "The access permissions can also be changed after the install."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:72
msgid "Advanced User Management"
msgstr "Speciális Felhasználókezelés"

#. type: Content of: <section><section><para>
#: en/addUser.xml:74
msgid ""
"If the <guibutton>advanced</guibutton> button is clicked you are offered a "
"screen that allows you to edit the settings for the user you are adding."
msgstr ""

#. type: Content of: <section><section><para>
#: en/addUser.xml:77
msgid "Additionally, you can disable or enable a guest account."
msgstr ""

#. type: Content of: <section><section><warning><para>
#: en/addUser.xml:80
msgid ""
"Anything a guest with a default <emphasis>rbash</emphasis> guest account "
"saves to his /home directory will be erased when he logs out.  The guest "
"should save his important files to a USB key."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:86
msgid ""
"<guilabel>Enable guest account</guilabel>: Here you can enable or disable a "
"guest account. The guest account allows a guest to log into and use the PC, "
"but he has more restricted access than normal users."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:92
msgid ""
"<guilabel>Shell</guilabel>: This drop down list allows you to change the "
"shell used by the user you are adding in the previous screen, options are "
"Bash, Dash and Sh"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:97
msgid ""
"<guilabel>User ID</guilabel>: Here you can set the user ID for the user you "
"are adding in the previous screen. This is a number.  Leave it blank unless "
"you know what you are doing."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:102
msgid ""
"<guilabel>Group ID</guilabel>: This lets you set the group ID.  Also a "
"number, usually the same one as for the user. Leave it blank unless you know "
"what you are doing."
msgstr ""

#. type: Content of: <section><info><title>
#: en/ask_mntpoint_s.xml:11
msgid "Choose the mount points"
msgstr "Válassza ki a csatolási pontokat"

#.  Made by marja on 2012 03 28 
#.  NEEDS TO BE REVIEWED! 
#.  SimonNZG 2012-04-03 has taken a look but needs to come back 
#.  removed para xml:id's, marja, 20120409 
#.  barjac 14/04/2012 Minor edit to improve grammar and replaced "at least ONE"
#.        with "a", as I can't imagine having more than one root partition ;) 
#.  Lebarhon : I put [] where it seems having mistakes 
#.  Marja: you're right, in English English it is "its type", however, the Americans
#.        write "it's type". And you're right about the redundant part, too, I removed it
#.  And JohnR says the Americans are WRONG! :-)) 
#.  2012-04-19  Language proofreading done 
#. type: Content of: <section><mediaobject>
#: en/ask_mntpoint_s.xml:27
msgid ""
"<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-"
"chooseMountpoints.png\" align=\"center\" format=\"PNG\" xml:id="
"\"chooseMountPoints-im1\"></imagedata> </imageobject> <imageobject "
"condition='live'> <imagedata revision=\"1\" fileref=\"live-chooseMountpoints."
"png\" align=\"center\" format=\"PNG\" xml:id=\"live-chooseMountPoints-"
"im1\"></imagedata> </imageobject>"
msgstr ""
"<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-"
"chooseMountpoints.png\" align=\"center\" format=\"PNG\" xml:id="
"\"chooseMountPoints-im1\"></imagedata> </imageobject> <imageobject "
"condition='live'> <imagedata revision=\"1\" fileref=\"live-chooseMountpoints."
"png\" align=\"center\" format=\"PNG\" xml:id=\"live-chooseMountPoints-"
"im1\"></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/ask_mntpoint_s.xml:37
msgid ""
"Here you see the Linux partitions that have been found on your computer. If "
"you don't agree with the <application>DrakX</application> suggestions, you "
"can change the mount points."
msgstr ""

#. type: Content of: <section><note><para>
#: en/ask_mntpoint_s.xml:42
msgid ""
"If you change anything, make sure you still have a <literal>/</literal> "
"(root) partition."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:48
msgid ""
"Every partition is shown as follows: \"Device\" (\"Capacity\", \"Mount point"
"\", \"Type\")."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:53
msgid ""
"\"Device\", is made up of: \"hard drive\", [\"hard drive number\"(letter)], "
"\"partition number\" (for example, \"sda5\")."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:59
msgid ""
"If you have many partitions, you can choose many different mount points from "
"the drop down menu, such as <literal>/</literal>, <literal>/home</literal> "
"and <literal>/var</literal>. You can even make your own mount points, for "
"instance <literal>/video</literal> for a partition where you want to store "
"your films, or <literal>/cauldron-home</literal> for the <literal>/home</"
"literal> partition of a cauldron install."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:69
msgid ""
"For partitions you don't need to have access to, you can leave the mount "
"point field blank."
msgstr ""

#. type: Content of: <section><warning><para>
#: en/ask_mntpoint_s.xml:75
msgid ""
"Choose <guibutton>Previous</guibutton> if you are not sure what to choose, "
"and then tick <guilabel>Custom disk partitioning</guilabel>. In the screen "
"that follows, you can click on a partition to see its type and size."
msgstr ""

#. type: Content of: <section><para>
#: en/ask_mntpoint_s.xml:81
msgid ""
"If you are sure the mount points are correct, click on <guibutton>Next</"
"guibutton>, and choose whether you only want to format the partition(s) "
"DrakX suggests, or more."
msgstr ""

#. type: Content of: <section><info><title>
#: en/bestTime.xml:10
msgid "Clock settings"
msgstr "Az óra beállítása"

#. type: Content of: <section><mediaobject>
#: en/bestTime.xml:14
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"live-bestTime.png\" "
"format=\"PNG\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"live-bestTime.png\" "
"format=\"PNG\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/bestTime.xml:20
msgid ""
"In this step, you have to select on which time your internal clock is set, "
"either local time or UTC time."
msgstr ""

#. type: Content of: <section><para>
#: en/bestTime.xml:23
msgid "In advanced tab, you will find more options about clock settings."
msgstr ""

#. type: Content of: <section><info><title>
#: en/bootLive.xml:1
msgid "Boot Mageia as Live system"
msgstr "Mageia indítása mint Live rendszer"

#. type: Content of: <section><section><info><title>
#: en/bootLive.xml:1
msgid "Booting the medium"
msgstr ""

#. type: Content of: <section><section><section><info><title>
#: en/bootLive.xml:1
msgid "From a disc"
msgstr "Betöltés lemezről"

#. type: Content of: <section><section><section><para>
#: en/bootLive.xml:1
msgid ""
"You can boot directly from the media you used to burn your image (CD-ROM, "
"DVD-ROM...). You usually just need to insert it in your CD/DVD drive for the "
"bootloader to launch the installation automatically after rebooting the "
"computer. If that does not happen you may need to reconfigure your BIOS or "
"press one key that will offer you to choose the peripheral from which the "
"computer will boot."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/bootLive.xml:6
msgid ""
"According to which hardware you have, and how it is configured, you get "
"either one or another of the two screens below."
msgstr ""

#. type: Content of: <section><section><section><info><title>
#: en/bootLive.xml:7
msgid "From a USB device"
msgstr "Betöltés USB eszközről"

#. type: Content of: <section><section><section><para>
#: en/bootLive.xml:7
msgid ""
"You can boot from the USB device on which you dumped your image ISO. "
"According to your BIOS settings, the computer boots perhaps directly on the "
"USB device already plugged in a port. If that does not happen you may need "
"to reconfigure your BIOS or press one key that will offer you to choose the "
"peripheral from which the computer will boot."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/bootLive.xml:12
msgid "In BIOS/CSM/Legacy mode"
msgstr ""

#. type: Content of: <section><section><mediaobject>
#: en/bootLive.xml:12
msgid "<imageobject><imagedata fileref=\"../live-bootCSM.png\"/></imageobject>"
msgstr ""
"<imageobject><imagedata fileref=\"../live-bootCSM.png\"/></imageobject>"

#. type: Content of: <section><section><mediaobject><caption><para>
#: en/bootLive.xml:12
msgid "First screen while booting in BIOS mode"
msgstr ""

#. type: Content of: <section><section><para>
#: en/bootLive.xml:12
msgid "In the middle menu, you have the choice between three actions:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:13
msgid ""
"Boot Mageia: That means Mageia 5 will start from the connected media (CD/DVD "
"or USB stick) without writing anything on the disk, so expect a very slow "
"system. Once the boot is done, you can proceed to the installation on a hard "
"disk."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:16
msgid ""
"Install Mageia: This choice will directly install Mageia on a hard disk."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:17
msgid ""
"Boot from hard disk: This choice allows to boot from hard disk, as usual, "
"when no media (CD/DVD or USB stick) is connected. (not working with Mageia "
"5)."
msgstr ""

#. type: Content of: <section><section><para>
#: en/bootLive.xml:19
msgid "In the bottom menu, are the Boot Options:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:19
msgid ""
"F1 - Help. Explain the options \"splash\", \"apm\", \"acpi\" and \"Ide\""
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:20
msgid "F2 - Language. Choose the display language of the screens."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:21
msgid "F3 - Screen resolution. Choose between text, 640x400, 800x600, 1024x728"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:22
msgid ""
"F4 - CD-Rom. CD-Rom or Other. Normally, the installation is performed from "
"the inserted installation medium. Here, select other sources, like FTP or "
"NFS servers. If the installation is carried out in a network with an SLP "
"server, select one of the installation sources available on the server with "
"this option."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:26
msgid ""
"F5 - Driver. Yes or No. The system is aware about the presence of an "
"optional disk with a driver update and will require its insertion during "
"installation process."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:28
msgid ""
"F6 - Kernel options. This is a way to specify options according to your "
"hardware and the drivers to use."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/bootLive.xml:29
msgid "In UEFI mode"
msgstr "UEFI módal"

#. type: Content of: <section><section><mediaobject>
#: en/bootLive.xml:29
msgid ""
"<imageobject><imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" "
"align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/></imageobject>"
msgstr ""
"<imageobject><imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" "
"align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/></imageobject>"

#. type: Content of: <section><section><mediaobject><caption><para>
#: en/bootLive.xml:29
msgid "First screen while booting on UEFI system from disk"
msgstr ""

#. type: Content of: <section><section><para>
#: en/bootLive.xml:29
msgid ""
"You have only the choice to run Mageia in Live mode (first choice)  or to "
"process the installation (second choice)."
msgstr ""

#. type: Content of: <section><section><para>
#: en/bootLive.xml:30
msgid ""
"If you booted from a USB stick, you get two supplemental lines which are a "
"duplicata of the previous lines suffixed with \"USB\". You have to choose "
"them."
msgstr ""

#. type: Content of: <section><section><para>
#: en/bootLive.xml:32
msgid ""
"In each case, the first steps will be the same to choose language, timezone "
"and keyboard, then the processes differ, with <link linkend=\"testing"
"\">additional steps in Live mode</link>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/chooseDesktop.xml:3
msgid "Desktop Selection"
msgstr "Munkaasztal kiválasztása"

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:8
msgid ""
"Depending on your selection here, you may be offered further screens to fine "
"tune your choice."
msgstr ""

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:11
msgid ""
"After the selection step(s), you will see a slide show during package "
"installation. The slide show can be disabled by pressing the "
"<guilabel>Details</guilabel> button"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/chooseDesktop.xml:16
msgid ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-chooseDesktop.png\" "
"align=\"center\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-chooseDesktop.png\" "
"align=\"center\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:21
msgid ""
"Choose whether you prefer to use the <application>KDE</application> or "
"<application>Gnome</application> desktop environment. Both come with a full "
"set of useful applications and tools. Tick <guilabel>Custom</guilabel> if "
"you want to use neither or both, or if you want something other than the "
"default software choices for these desktop environments. The "
"<application>LXDE</application> desktop is lighter than the previous two, "
"sporting less eye candy and fewer packages installed by default."
msgstr ""

#. type: Content of: <section><info><title>
#: en/choosePackageGroups.xml:3
msgid "Package Group Selection"
msgstr "Csomagcsoportok kiválasztása"

#. Lebarhon 20170209 Updated SC
#. type: Content of: <section><mediaobject>
#: en/choosePackageGroups.xml:9
msgid ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-choosePackageGroups.png"
"\" align=\"center\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-choosePackageGroups.png"
"\" align=\"center\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/choosePackageGroups.xml:14
msgid ""
"Packages have been sorted into groups, to make choosing what you need on "
"your system a lot easier. The groups are fairly self explanatory, however "
"more information about the content of each is available in tool-tips which "
"become visible as the mouse is hovered over them."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:21
msgid "Workstation."
msgstr "Munkaállomás."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:25
msgid "Server."
msgstr "Kiszolgáló."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:29
msgid "Graphical Environment."
msgstr "Grafikus környezet"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:33
msgid ""
"Individual Package Selection: You can use this option to manually add or "
"remove packages."
msgstr ""

#. type: Content of: <section><para>
#: en/choosePackageGroups.xml:38
msgid ""
"Read <xref linkend=\"minimal-install\"/> for instructions on how to do a "
"minimal install (without or with X &amp; IceWM)."
msgstr ""

#. type: Content of: <section><info><title>
#: en/choosePackagesTree.xml:4
msgid "Choose Individual Packages"
msgstr ""

#. 2012-12-26 marja - exported this section from choosePackages.xml to start a new page
#. type: Content of: <section><mediaobject>
#: en/choosePackagesTree.xml:11
msgid ""
"<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" align="
"\"center\" format=\"PNG\" ></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" align="
"\"center\" format=\"PNG\" ></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/choosePackagesTree.xml:17
msgid ""
"Here you can add or remove any extra packages to customise your installation."
msgstr ""

#. type: Content of: <section><para>
#: en/choosePackagesTree.xml:20
msgid ""
"After having made your choice, you can click on the <guibutton>floppy icon</"
"guibutton> at the bottom of the page to save your choice of packages (saving "
"to a USB key works, too). You can then use this file to install the same "
"packages on another system, by pressing the same button during install and "
"choosing to load it."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureServices.xml:12
msgid "Configure your Services"
msgstr ""

#.  2012-12-25 marja - moved this section out of misc-params.xml 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/configureServices.xml:21
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></"
"imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/configureServices.xml:27
msgid ""
"Here you can set which services should (not) start when you boot your system."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:30
msgid ""
"There are four groups, click on the triangle before a group to expand it and "
"see all services in it."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:34
msgid "The setting DrakX chose are usually good."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:37
msgid ""
"If you highlight a service, some information about it is shown in the info "
"box below."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:41
msgid "Only change things when you know very well what you are doing."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureTimezoneUTC.xml:3
msgid "Configure your Timezone"
msgstr ""

#.  2012-12-25 marja - moved this part out of misc-params.xml 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/configureTimezoneUTC.xml:11
msgid ""
"<imageobject condition=\"classical\"> <imagedata xml:id="
"\"configureTimezoneUTC-im1\" revision=\"1\" fileref=\"dx2-"
"configureTimezoneUTC.png\" align=\"center\" format=\"PNG\"/> </imageobject> "
"<imageobject> <imagedata fileref=\"live-timeZone.png\" condition=\"live\" "
"format=\"PNG\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata xml:id="
"\"configureTimezoneUTC-im1\" revision=\"1\" fileref=\"dx2-"
"configureTimezoneUTC.png\" align=\"center\" format=\"PNG\"/> </imageobject> "
"<imageobject> <imagedata fileref=\"live-timeZone.png\" condition=\"live\" "
"format=\"PNG\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/configureTimezoneUTC.xml:20
msgid ""
"Choose your time zone by choosing your country or a city close to you in the "
"same time zone."
msgstr ""

#. type: Content of: <section><para>
#: en/configureTimezoneUTC.xml:24
msgid ""
"In next screen you can choose to set your hardware clock to local time or to "
"GMT, also known as UTC."
msgstr ""

#. type: Content of: <section><note><para>
#: en/configureTimezoneUTC.xml:29
msgid ""
"If you have more than one operating system on your computer, make sure they "
"are all set to local time, or all to UTC/GMT."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureX_card_list.xml:11
msgid "Choose an X Server (Configure your Graphic Card)"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/configureX_card_list.xml:16
msgid ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id="
"\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" format="
"\"PNG\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id="
"\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" format="
"\"PNG\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:21
msgid ""
"DrakX has a very comprehensive database of video cards and will usually "
"correctly identify your video device."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:24
msgid ""
"If the installer has not correctly detected your graphic card and you know "
"which one you have, you can select it from the tree by:"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:27 en/configureX_monitor.xml:69
msgid "vendor"
msgstr "gyártó"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:31
msgid "then the name of your card"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:35
msgid "and the type of card"
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:39
msgid ""
"If you cannot find your card in the vendor lists (because it's not yet in "
"the database or it's an older card) you may find a suitable driver in the "
"Xorg category"
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:43
msgid ""
"The Xorg listing provides more than 40 generic and open source video card "
"drivers. If you still can't find a named driver for your card there is the "
"option of using the vesa driver which provides basic capabilities."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:48
msgid ""
"Be aware that if you select an incompatible driver you may only have access "
"to the Commandline Interface."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:51
msgid ""
"Some video card manufacturers provide proprietary drivers for Linux which "
"may only be available in the Nonfree repository and in some cases only from "
"the card manufacturers' websites."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:55
msgid ""
"The Nonfree repository needs to be explicitly enabled to access them.  If "
"you didn't select it previously, you should do this after your first reboot."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureX_chooser.xml:4
msgid "Graphic Card and Monitor Configuration"
msgstr ""

#.  Marja 2012-08-10, copied setupX.xml to this file and replaced all "setupX" in the code by "configureX_chooser", because this is the correct filename for this page
#. type: Content of: <section><mediaobject>
#: en/configureX_chooser.xml:11
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureX_chooser.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureX_chooser-im1\"> </"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureX_chooser.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureX_chooser-im1\"> </"
"imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/configureX_chooser.xml:18
msgid ""
"No matter which graphical environment (also known as desktop environment) "
"you chose for this install of <application>Mageia</application>, they are "
"all based on a graphical user interface system called <acronym>X Window "
"System</acronym>, or simply <acronym>X</acronym>. So in order for "
"<acronym>KDE</acronym>, <acronym>Gnome</acronym>, <acronym>LXDE</acronym> or "
"any other graphical environment to work well, the following <acronym>X</"
"acronym> settings need to be correct. Choose the correct settings if you can "
"see that <application>DrakX</application> didn't make a choice, or if you "
"think the choice is incorrect."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:31
msgid ""
"<emphasis><guibutton>Graphic card</guibutton></emphasis>: Choose your card "
"from the list if needed."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:37
msgid ""
"<emphasis><guibutton>Monitor</guibutton></emphasis>: You can choose "
"<guilabel>Plug'n Play</guilabel> when applicable, or choose your monitor "
"from the <guilabel>Vendor</guilabel> or <guilabel>Generic</guilabel> list. "
"Choose <guilabel>Custom</guilabel> if you prefer to manually set the "
"horizontal and vertical refresh rates of your monitor."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><warning><para>
#: en/configureX_chooser.xml:45
msgid "Incorrect refresh rates may damage your monitor"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:51
msgid ""
"<emphasis><guibutton>Resolution</guibutton></emphasis>: Set the desired "
"resolution and color depth of your monitor here."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:56
msgid ""
"<emphasis><guibutton>Test</guibutton></emphasis>: The test button does not "
"always appear during install. If the button is there, you can control your "
"settings by pressing it. If you see a question asking you whether your "
"settings are correct, you can answer \"yes\", and the settings will be kept. "
"If you don't see anything, you'll return to the configuration screen and be "
"able to reconfigure everything until the test is good. <emphasis>Make sure "
"your settings are on the safe side if the test button isn't available</"
"emphasis>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:67
msgid ""
"<emphasis><guibutton>Options</guibutton></emphasis>: Here you can choose to "
"enable or disable various options."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureX_monitor.xml:18
msgid "Choosing your Monitor"
msgstr "Monitor kiválasztása"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:21
msgid ""
"DrakX has a very comprehensive database of monitors and will usually "
"correctly identify yours."
msgstr ""

#. type: Content of: <section><warning><para>
#: en/configureX_monitor.xml:26
msgid ""
"<emphasis>Selecting a monitor with different characteristics could damage "
"your monitor or video hardware. Please don't try something without knowing "
"what you are doing.</emphasis> If in doubt you should consult your monitor "
"documentation"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/configureX_monitor.xml:34
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor."
"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor."
"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:42
msgid "<emphasis>Custom</emphasis>"
msgstr "<emphasis>Egyéni</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:44
msgid ""
"This option allows you to set two critical parameters, the vertical refresh "
"rate and the horizontal sync rate. Vertical refresh determines how often the "
"screen is refreshed and horizontal sync is the rate at which scan lines are "
"displayed."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:49
msgid ""
"It is <emphasis>VERY IMPORTANT</emphasis> that you do not specify a monitor "
"type with a sync range that is beyond the capabilities of your monitor: you "
"may damage your monitor. If in doubt, choose a conservative setting and "
"consult your monitor documentation."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:55
msgid "<emphasis>Plug 'n Play</emphasis>"
msgstr "<emphasis>Plug 'n Play</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:58
msgid ""
"This is the default option and tries to determine the monitor type from the "
"monitor database."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:63
msgid "<emphasis>Vendor</emphasis>"
msgstr "<emphasis>Gyártó</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:65
msgid ""
"If the installer has not correctly detected your monitor and you know which "
"one you have, you can select it from the tree by selecting:"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_monitor.xml:73
msgid "the monitor manufacturers name"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_monitor.xml:77
msgid "the monitor description"
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:82
msgid "<emphasis>Generic</emphasis>"
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:84
msgid ""
"selecting this group displays nearly 30 display configurations such as "
"1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is "
"often a good monitor selection group if you need to use the Vesa card driver "
"when your video hardware cannot be determined automatically. Once again it "
"may be wise to be conservative in your selections."
msgstr ""

#. type: Content of: <section><info><title>
#: en/diskdrake.xml:6
msgid "Custom disk partitioning with DiskDrake"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/diskdrake.xml:10
msgid ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake.png"
"\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> "
"<imagedata fileref=\"live-diskdrake.png\" align=\"center\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake.png"
"\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> "
"<imagedata fileref=\"live-diskdrake.png\" align=\"center\"/> </imageobject>"

#. type: Content of: <section><warning><para>
#: en/diskdrake.xml:18
msgid ""
"If you wish to use encryption on your <literal>/</literal> partition you "
"must ensure that you have a separate <literal>/boot</literal> partition. The "
"encryption option for the <literal>/boot</literal> partition must NOT be "
"set, otherwise your system will be unbootable."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:24
msgid ""
"Adjust the layout of your disk(s)  here. You can remove or create "
"partitions, change the filesystem of a partition or change its size and even "
"view what is in them before you start."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:28
msgid ""
"There is a tab for every detected hard disk or other storage device, like an "
"USB key. For example sda, sdb and sdc if there are three of them."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:31
msgid ""
"Push <guibutton>Clear all</guibutton> to wipe all partitions on the selected "
"storage device"
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:33
msgid ""
"For all other actions: click on the desired partition first. Then view it, "
"or choose a filesystem and a mount point, resize it or wipe it. "
"<guibutton>Toggle to expert mode</guibutton> (or <guibutton>Expert mode</"
"guibutton>) gives some more tools like to add a label or to choose a "
"partition type."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:38
msgid "Continue until you adjusted everything to your wishes."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:40
msgid "Click <guibutton>Done</guibutton> when you're ready."
msgstr ""

#. type: Content of: <section><note><para>
#: en/diskdrake.xml:43
msgid ""
"If you are installing Mageia on an UEFI system, check that an ESP (EFI "
"System Partition) is present and correctly mounted on /boot/EFI (see below)"
msgstr ""

#. type: Content of: <section><note><para><mediaobject>
#: en/diskdrake.xml:46
msgid ""
"<imageobject condition=\"classical\"><imagedata fileref=\"dx2-diskdrake2.png"
"\" align=\"center\"/></imageobject><imageobject condition=\"live"
"\"><imagedata align=\"center\" fileref=\"live-diskdrake2.png\"/></"
"imageobject>"
msgstr ""
"<imageobject condition=\"classical\"><imagedata fileref=\"dx2-diskdrake2.png"
"\" align=\"center\"/></imageobject><imageobject condition=\"live"
"\"><imagedata align=\"center\" fileref=\"live-diskdrake2.png\"/></"
"imageobject>"

#. type: Content of: <section><note><para>
#: en/diskdrake.xml:46
msgid "<placeholder type=\"mediaobject\" id=\"0\"/>"
msgstr "<placeholder type=\"mediaobject\" id=\"0\"/>"

#. type: Content of: <section><note><para>
#: en/diskdrake.xml:49
msgid ""
"If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot "
"partition is present and of the correct type"
msgstr ""

#. type: Content of: <section><note><mediaobject>
#: en/diskdrake.xml:51
msgid ""
"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
"\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
"\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks3.png\"/> </"
"imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
"\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
"\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks3.png\"/> </"
"imageobject>"

#. type: Content of: <section><info><title>
#: en/doPartitionDisks.xml:7
msgid "Partitioning"
msgstr "Partícionálás"

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:9
msgid ""
"In this screen you can see the content of your hard drive(s) and see the "
"solutions the DrakX partitioning wizard found for where to install "
"<application>Mageia</application>."
msgstr ""

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:13
msgid ""
"The options available from the list below will vary depending on your "
"particular hard drive(s) layout and content."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/doPartitionDisks.xml:17
msgid ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" align="
"\"center\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" align="
"\"center\"/> </imageobject>"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:24
msgid "Use Existing Partitions"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:25
msgid ""
"If this option is available, then existing Linux compatible partitions have "
"been found and may be used for the installation."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:27
msgid "Use Free Space"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:27
msgid ""
"If you have unused space on your hard drive then this option will use it for "
"your new Mageia installation."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:29
msgid "Use Free Space on a Windows Partition"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:30
msgid ""
"If you have unused space on an existing Windows partition, the installer may "
"offer to use it."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:32
msgid ""
"This can be a useful way of making room for your new Mageia installation, "
"but is a risky operation so you should make sure you have backed up all "
"important files!"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:35
msgid ""
"Note that this involves shrinking the size of the Windows partition. The "
"partition must be \"clean\", meaning that Windows must have closed down "
"correctly the last time it was used. It must also have been defragmented, "
"although this is not a guarantee that all files in the partition have been "
"moved out of the area that is about to be used. It is highly recommended to "
"back up your personal files."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:41
msgid ""
"With this option, the installer displays the remaining Windows partition in "
"light blue and the future Mageia partition in dark blue with their intended "
"sizes just under. You have the possibility to adapt these sizes by clicking "
"and dragging the gap between both partitions. See the screen-shot below."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><mediaobject>
#: en/doPartitionDisks.xml:45
msgid ""
"<imageobject condition=\"classical\"><imagedata fileref=\"dx2-"
"doPartitionDisks2.png\" align=\"center\"/></imageobject><imageobject "
"condition=\"live\"><imagedata fileref=\"live-doPartitionDisks2.png\" align="
"\"center\"/></imageobject>"
msgstr ""
"<imageobject condition=\"classical\"><imagedata fileref=\"dx2-"
"doPartitionDisks2.png\" align=\"center\"/></imageobject><imageobject "
"condition=\"live\"><imagedata fileref=\"live-doPartitionDisks2.png\" align="
"\"center\"/></imageobject>"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:45
msgid "Erase and use Entire Disk."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:46
msgid "This option will use the complete drive for Mageia."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:47
msgid "Note! This will erase ALL data on the selected hard drive. Take care!"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:48
msgid ""
"If you intend to use part of the disk for something else, or you already "
"have data on the drive that you are not prepared to lose, then do not use "
"this option."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:51
msgid "Custom disk partitioning"
msgstr "Egyéni lemezpartícionálás"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:52
msgid ""
"This gives you complete control over the placing of the installation on your "
"hard drive(s)."
msgstr ""

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:55
msgid "<emphasis role=\"bold\">Partition sizing:</emphasis>"
msgstr ""

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:56
msgid ""
"The installer will share the available place out according to the following "
"rules:"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:58
msgid ""
"If the total available place is lower than 50 GB, only one partition is "
"created for /, there is no separate partition for /home."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:60
msgid ""
"If the total available place is over 50 GB, then three partitions are created"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:61
msgid ""
"6/19 of the total available place is allocated to / with a maximum of 50 GB"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:62
msgid "1/19 is allocated to swap with a maximum of 4 GB"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:62
msgid "the rest (at least 12/19) is allocated to /home"
msgstr ""

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:63
msgid ""
"That means that from 160 GB and over of available place, the installer will "
"create three partitions: 50 GB for /, 4 GB for swap and the rest for /home."
msgstr ""

#. type: Content of: <section><note><para>
#: en/doPartitionDisks.xml:67
msgid ""
"If you are using an UEFI system, the ESP (EFI System Partition) will be "
"automatically detected, or created if it does not exist yet, and mounted on /"
"boot/EFI. The \"Custom disk partitioning\" option is the only one that "
"allows to check it has been correctly done"
msgstr ""

#. type: Content of: <section><note><para>
#: en/doPartitionDisks.xml:73
msgid ""
"If you are using a Legacy (as known as CSM or BIOS) system with a GPT disk, "
"you need to create a Bios boot partition if not already existing. It is an "
"about 1 MiB partition with no mount point. Choose <xref linkend=\"diskdrake"
"\"/> to be able to create it with the Installer like any other partition, "
"just select BIOS boot partition as filesystem type."
msgstr ""

#. type: Content of: <section><note><mediaobject>
#: en/doPartitionDisks.xml:79
msgid ""
"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
"\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
"\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
"\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
"\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </imageobject>"

#. type: Content of: <section><note><mediaobject>
#: en/doPartitionDisks.xml:87
msgid ""
"<imageobject> <imagedata fileref=\"dx2-doPartitionDisks4.png\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-doPartitionDisks4.png\"/> </"
"imageobject>"

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:93
msgid ""
"Some newer drives are now using 4096 byte logical sectors, instead of the "
"previous standard of 512 byte logical sectors. Due to lack of available "
"hardware, the partitioning tool used in the installer has not been tested "
"with such a drive. Also some ssd drives now use an erase block size over 1 "
"MB. We suggest to pre-partition the drive, using an alternative partitioning "
"tool like gparted, if you own such a device, and to use the following "
"settings:"
msgstr ""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:100
msgid "\"Align to\" \"MiB\""
msgstr ""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:101
msgid "\"Free space preceding (MiB)\" \"2\""
msgstr ""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:102
msgid ""
"Also make sure all partitions are created with an even number of megabytes."
msgstr ""

#. type: Content of: <article><info><title>
#: en/DrakLive-cover.xml:4 en/DrakLive-cover.xml:30 en/DrakLive.xml:3
msgid "Installation from LIVE medium"
msgstr "Telepítés a LIVE médiumról"

#. type: Content of: <book><info>
#: en/DrakLive-cover.xml:5 en/DrakX-cover.xml:5
msgid "<publisher> <publishername>Mageia.org</publishername> </publisher>"
msgstr "<publisher> <publishername>Mageia.org</publishername> </publisher>"

#. type: Content of: <book><info><revhistory><revision><date>
#: en/DrakLive-cover.xml:10
msgid "January 2015"
msgstr "2015 Január"

#. type: Content of: <book><info><revhistory><revision><revremark>
#: en/DrakLive-cover.xml:11
msgid "Mageia 5"
msgstr "Mageia 5"

#. type: Content of: <book><info><cover><para>
#: en/DrakLive-cover.xml:15 en/DrakX-cover.xml:15
msgid "The Official Documentation for Mageia"
msgstr "Mageia Hivatalos dokumentáció"

#. type: Content of: <book><info><cover><mediaobject>
#: en/DrakLive-cover.xml:17 en/DrakX-cover.xml:17
msgid "<imageobject> <imagedata fileref=\"mageia-2013.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"mageia-2013.png\"/> </imageobject>"

#. type: Content of: <article><info><cover><para>
#: en/DrakLive-cover.xml:21 en/DrakLive.xml:12 en/DrakX-cover.xml:21
#: en/DrakX.xml:12
msgid ""
"The texts and screenshots in this manual are available under the CC BY-SA "
"3.0 license <link ns6:href=\"http://creativecommons.org/licenses/by-sa/3.0/"
"\">http://creativecommons.org/licenses/by-sa/3.0/</link>."
msgstr ""

#. type: Content of: <article><info><cover><para>
#: en/DrakLive-cover.xml:24 en/DrakLive.xml:15 en/DrakX-cover.xml:24
#: en/DrakX.xml:15
msgid ""
"This manual was produced with the help of the <link ns6:href=\"http://www."
"calenco.com\">Calenco CMS</link> developed by <link ns6:href=\"http://www."
"neodoc.biz\">NeoDoc</link>."
msgstr ""

#. type: Content of: <article><info><cover><para>
#: en/DrakLive-cover.xml:26 en/DrakLive.xml:17 en/DrakX-cover.xml:26
#: en/DrakX.xml:17
msgid ""
"It was written by volunteers in their free time. Please contact <link ns6:"
"href=\"https://wiki.mageia.org/en/Documentation_team\">Documentation Team</"
"link>, if you would like to help improve this manual."
msgstr ""

#. type: Content of: <article><info><cover><para><note>
#: en/DrakLive-cover.xml:31 en/DrakLive.xml:6 en/DrakX-cover.xml:37
#: en/DrakX.xml:6
msgid "<note>"
msgstr "<note>"

#. type: Content of: <article><info><cover><para><note><para>
#: en/DrakLive-cover.xml:32 en/DrakLive.xml:7 en/DrakX-cover.xml:38
#: en/DrakX.xml:7
msgid ""
"No one will see all the installer screens that you see in this manual. Which "
"screens you will see, depends on your hardware and the choices you make "
"while installing."
msgstr ""

#. type: Content of: <article><info><cover><para>
#: en/DrakLive-cover.xml:35 en/DrakLive.xml:10 en/DrakX-cover.xml:41
#: en/DrakX.xml:10
msgid "</note>"
msgstr "</note>"

#. type: Content of: <article><info><title>
#: en/DrakX-cover.xml:4 en/DrakX-cover.xml:36 en/DrakX.xml:3
msgid "Installation with DrakX"
msgstr ""

#. type: Content of: <book><info><revhistory><revision><date>
#: en/DrakX-cover.xml:10
msgid "February 2014"
msgstr "2014 Február"

#. type: Content of: <book><info><revhistory><revision><revremark>
#: en/DrakX-cover.xml:11
msgid "Mageia 4"
msgstr "Mageia 4"

#. type: Content of: <section><info><title>
#: en/exitInstall.xml:3
msgid "Congratulations"
msgstr "Gratulálunk"

#.  Lebarhon 20170209 updated SC
#. type: Content of: <section><mediaobject>
#: en/exitInstall.xml:7
msgid ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-exitInstall.png\" "
"align=\"center\" revision=\"1\" xml:id=\"exitInstall-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-exitInstall.png\" "
"align=\"center\" revision=\"1\" xml:id=\"exitInstall-im1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/exitInstall.xml:11
msgid ""
"You have finished installing and configuring <application>Mageia</"
"application> and it is now safe to remove the installation medium and reboot "
"your computer."
msgstr ""

#. type: Content of: <section><para>
#: en/exitInstall.xml:14
msgid ""
"After reboot, in the bootloader screen, you can choose between the operating "
"systems on your computer (if you have more than one)."
msgstr ""

#. type: Content of: <section><para>
#: en/exitInstall.xml:17
msgid ""
"If you didn't adjust the settings for the bootloader, your Mageia install "
"will be automatically selected and started."
msgstr ""

#. type: Content of: <section><para>
#: en/exitInstall.xml:20
msgid "Enjoy!"
msgstr ""

#. type: Content of: <section><para>
#: en/exitInstall.xml:21
msgid ""
"Visit www.mageia.org if you have any questions or want to contribute to "
"Mageia"
msgstr ""

#. type: Content of: <section><info><title>
#: en/firewall.xml:3
msgid "Firewall"
msgstr "Tűzfal"

#. type: Content of: <section><para>
#: en/firewall.xml:6
msgid ""
"This section allows to configure some simple firewall rules: they determine "
"which type of message from the Internet will be accepted by the target "
"system. This, in turn, allows the corresponding services on the system to be "
"accessible from the Internet."
msgstr ""

#. type: Content of: <section><para>
#: en/firewall.xml:12
msgid ""
"In the default setting, no button is checked - no service of the system is "
"accessibly from the network. The \"<emphasis>Everything (no firewall)</"
"emphasis>\" button has a particular role: it enables access to all services "
"of the machine - an option that does not make much sense in the context of "
"the installer since it would create a totally unprotected system.  Its "
"veritable use is in the context of the Mageia Control Center (which uses the "
"same GUI layout) for temporarily disabling the entire set of firewall rules "
"for testing and debugging purposes."
msgstr ""

#. type: Content of: <section><para>
#: en/firewall.xml:21
msgid ""
"All other checkbuttons are more or less self-explanatory. As an example, you "
"will check the \"CUPS server\" button if you want printers on your machine "
"to be accessible from the network."
msgstr ""

#. type: Content of: <section><para>
#: en/firewall.xml:25
msgid "<emphasis role=\"bold\">Advanced</emphasis>"
msgstr ""

#. type: Content of: <section><para>
#: en/firewall.xml:27
msgid ""
"The set of checkbuttons only comprises the most common services. The "
"\"Advanced\" button allows to enable messages that correspond to a service "
"for which no checkbutton exists. The \"<emphasis>Advanced</emphasis>\" "
"button opens a window where you can enable a series of services by typing a "
"list of couples (blank separated)"
msgstr ""

#. type: Content of: <section><para>
#: en/firewall.xml:33
msgid "<emphasis>&lt;port-number>/&lt;protocol></emphasis>"
msgstr "<emphasis>&lt;port-number>/&lt;protocol></emphasis>"

#. type: Content of: <section><simplelist><member>
#: en/firewall.xml:36
msgid ""
"- <emphasis>&lt;port-number></emphasis> is the value of the port assigned to "
"the service you want to enable (e.g. 873 for the RSYNC service) as defined "
"in <emphasis>RFC-433</emphasis>;"
msgstr ""

#. type: Content of: <section><simplelist><member>
#: en/firewall.xml:40
msgid ""
"- <emphasis>&lt;protocol></emphasis> is one of <emphasis>TCP</emphasis> or "
"<emphasis>UDP</emphasis> - the internet protocol that is used by the service."
msgstr ""

#. type: Content of: <section><para>
#: en/firewall.xml:45
msgid ""
"For instance, the entry for enabling access to the RSYNC service therefore "
"is <emphasis>873/tcp</emphasis>."
msgstr ""

#. type: Content of: <section><para>
#: en/firewall.xml:48
msgid ""
"In case a service is implemented to use both protocols, you specify 2 "
"couples for the same port."
msgstr ""

#. type: Content of: <section><info><title>
#: en/formatPartitions.xml:4
msgid "Formatting"
msgstr ""

#.  Made by marja on 2012 03 29 
#.  NEEDS TO BE REVIEWED! 
#.  marja 2012-04-24 added screenshot 
#.  marja 2012-04-24 added emphasis tags in formatPartitions-pa1 
#. type: Content of: <section><mediaobject>
#: en/formatPartitions.xml:18
msgid ""
"<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-"
"formatPartitions.png\" format=\"PNG\" align=\"center\" xml:id="
"\"formatPartitions-im1\"> </imagedata> </imageobject> <imageobject "
"condition='live'> <imagedata revision=\"1\" fileref=\"live-formatPartitions."
"png\" format=\"PNG\" align=\"center\" xml:id=\"live-formatPartitions-im1\"> "
"</imagedata> </imageobject>"
msgstr ""
"<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-"
"formatPartitions.png\" format=\"PNG\" align=\"center\" xml:id="
"\"formatPartitions-im1\"> </imagedata> </imageobject> <imageobject "
"condition='live'> <imagedata revision=\"1\" fileref=\"live-formatPartitions."
"png\" format=\"PNG\" align=\"center\" xml:id=\"live-formatPartitions-im1\"> "
"</imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/formatPartitions.xml:30
msgid ""
"Here you can choose which partition(s) you wish to format. Any data on "
"partitions <emphasis>not</emphasis> marked for formatting will be saved."
msgstr ""

#. type: Content of: <section><para>
#: en/formatPartitions.xml:34
msgid "Usually at least the partitions DrakX selected, need to be formatted"
msgstr ""

#. type: Content of: <section><para>
#: en/formatPartitions.xml:37
msgid ""
"Click on <guibutton>Advanced</guibutton> to choose partitions you want to "
"check for so called <emphasis>bad blocks</emphasis>"
msgstr ""

#. type: Content of: <section><tip><para>
#: en/formatPartitions.xml:42
msgid ""
"If you're not sure you have made the right choice, you can click on "
"<guibutton>Previous</guibutton>, again on <guibutton>Previous</guibutton> "
"and then on <guibutton>Custom</guibutton> to get back to the main screen.  "
"In that screen you can choose to view what is in your partitions."
msgstr ""

#. type: Content of: <section><para>
#: en/formatPartitions.xml:49
msgid ""
"When you are confident about the selection, click on <guibutton>Next</"
"guibutton> to continue."
msgstr ""

#. type: Content of: <section><info><title>
#: en/installer.xml:3
msgid "DrakX, the Mageia Installer"
msgstr "DrakX, a Mageia telepítő"

#. type: Content of: <section><para>
#: en/installer.xml:7
msgid ""
"Whether you are new to GNU-Linux or an experienced user, the Mageia "
"Installer is designed to help make your installation or upgrade as easy as "
"possible."
msgstr ""

#. type: Content of: <section><para>
#: en/installer.xml:11
msgid ""
"The initial menu screen has various options, however the default one will "
"start the installer, which will normally be all that you will need."
msgstr ""

#. type: Content of: <section><section><title>
#: en/installer.xml:16
msgid "Installation Welcome Screen"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/installer.xml:19
msgid "Using a Mageia DVD"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/installer.xml:21
msgid ""
"Here are the default welcome screens when using a Mageia DVD, The first one "
"with an UEFI system and the second one with a Legacy system:"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/installer.xml:26
msgid "<imageobject> <imagedata fileref=\"dx-welcome2.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"dx-welcome2.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para>
#: en/installer.xml:31
msgid ""
"From this screen, you can access to options by pressing the \"e\" letter to "
"enter the \"edit mode\". To come back to this screen, press either the key "
"\"esc\" to quit without saving or press the key \"Ctrl\" or \"F10\" to quit "
"with saving."
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/installer.xml:37
msgid "<imageobject> <imagedata fileref=\"dx-welcome.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"dx-welcome.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para>
#: en/installer.xml:42
msgid "From this screen, it is possible to set some personal preferences:"
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:45
msgid ""
"The language (for the installation only, may be different that the chosen "
"language for the system) by pressing the key F2 (Legacy mode only)"
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
#: en/installer.xml:50
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:55
msgid "Use the arrow keys to select the language and press the key Enter."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:58
msgid ""
"Here is for example, the French welcome screen when using a Live DVD/CD. "
"Note that the Live DVD/CD menu does not propose: <guilabel>Rescue System</"
"guilabel>, <guilabel>Memory test</guilabel> and <guilabel>Hardware Detection "
"Tool</guilabel>."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
#: en/installer.xml:65
msgid "<imageobject> <imagedata fileref=\"dx-welcome4fr.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcome4fr.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:72
msgid "Change the screen resolution by pressing the F3 key (Legacy mode only)."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
#: en/installer.xml:76
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:83
msgid ""
"Add some kernel options by pressing the <emphasis role=\"bold\">F6</"
"emphasis> key for the legacy mode or the <emphasis role=\"bold\">e</"
"emphasis> key for the UEFI mode."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:85
msgid ""
"If the installation fails, then it may be necessary to try again using one "
"of the extra options. The menu called by F6 displays a new line called "
"<guilabel>Boot options</guilabel> and propose four entries:"
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:90 en/installer.xml:93
msgid "- Default, it doesn't alter anything in the default options."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:96
msgid ""
"- No ACPI (Advanced Configuration and Power Interface), power management "
"isn't taken into account."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:99
msgid ""
"- No Local APIC (Local Advanced Programmable Interrupt Controller), it is "
"about CPU interruptions, select this option if you are asked for."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:103
msgid ""
"When you select one of these entries, it modifies the default options "
"displayed in the <guilabel>Boot Options</guilabel> line."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><note><para>
#: en/installer.xml:108
msgid ""
"In some Mageia releases, it may happen that the entries selected with the "
"key F6 does not appear in the <guilabel>Boot Options</guilabel> line, "
"however, they are really taken into account."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
#: en/installer.xml:115
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:122
msgid "Add more kernel options by pressing the key F1 (Legacy mode only)."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:125
msgid ""
"Pressing F1 opens a new window with more available options.  Select one with "
"the arrow keys and press Enter to have more details or press the Esc key to "
"go back to the welcome screen."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
#: en/installer.xml:131
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:136
msgid ""
"The detailed view about the option splash. Press Esc or select "
"<guilabel>Return to Boot Options</guilabel> to go back to the options list. "
"These options can by added by hand in the <guilabel>Boot options</guilabel> "
"line."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
#: en/installer.xml:142
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><note><para>
#: en/installer.xml:148
msgid "The help is translated in the chosen language with the F2 key."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:152
msgid ""
"For more information about kernel options on legacy and UEFI systems, see: "
"<link ns2:href=\"https://wiki.mageia.org/en/How_to_set_up_kernel_options"
"\">https://wiki.mageia.org/en/How_to_set_up_kernel_options</link>"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/installer.xml:159
msgid "Using a Wired Network"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/installer.xml:161
msgid ""
"Here is the default welcome screen when using a Wired Network-based "
"Installation CD (netinstall.iso or netinstall-nonfree.iso images):"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/installer.xml:165
msgid ""
"It does not allow to change the language, the available options are "
"described in the screen. For more information about using a Wired Network-"
"based Installation CD, see <link ns2:href=\"https://wiki.mageia.org/en/Boot."
"iso_install\">the Mageia Wiki</link>"
msgstr ""

#. type: Content of: <section><section><section><warning><para>
#: en/installer.xml:171
msgid "The keyboard layout is the American one."
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/installer.xml:175
msgid "<imageobject> <imagedata fileref=\"../dx-help.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"../dx-help.png\"/> </imageobject>"

#. type: Content of: <section><section><title>
#: en/installer.xml:183
msgid "The installation steps"
msgstr ""

#. type: Content of: <section><section><para>
#: en/installer.xml:185
msgid ""
"The install process is divided into a number of steps, which can be followed "
"on the side panel of the screen."
msgstr ""

#. type: Content of: <section><section><para>
#: en/installer.xml:188
msgid ""
"Each step has one or more screens which may also have <guibutton>Advanced</"
"guibutton> buttons with extra, less commonly required, options."
msgstr ""

#. type: Content of: <section><section><para>
#: en/installer.xml:192
msgid ""
"Most screens have <guibutton>Help</guibutton> buttons which give further "
"explanations about the current step."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/installer.xml:196
msgid ""
"If somewhere during install you decide to stop the installation, it is "
"possible to reboot, but please think twice before you do this.  Once a "
"partition has been formatted or updates have started to be installed, your "
"computer is no longer in the same state and rebooting it could very well "
"leave you with an unusable system. If in spite of this you are very sure "
"rebooting is what you want, go to a text terminal by pressing the three keys "
"<guibutton>Alt Ctrl F2</guibutton> at the same time. After that, press "
"<guibutton>Alt Ctrl Delete</guibutton> simultaneously to reboot."
msgstr ""

#. type: Content of: <section><section><title>
#: en/installer.xml:209
msgid "Installation Problems and Possible Solutions"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/installer.xml:212
msgid "No Graphical Interface"
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/installer.xml:216
msgid ""
"After the initial screen you did not reach the language selection screen. "
"This can happen with some graphic cards and older systems. Try using low "
"resolution by typing <code>vgalo</code> at the prompt."
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/installer.xml:223
msgid ""
"If the hardware is very old, a graphical installation may not be possible. "
"In this case it is worth trying a text mode installation. To use this hit "
"ESC at the first welcome screen and confirm with ENTER. You will be "
"presented with a black screen with the word \"boot:\". Type \"text\" and hit "
"ENTER. Now continue with the installation in text mode."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/installer.xml:234
msgid "The Install Freezes"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/installer.xml:236
msgid ""
"If the system appeared to freeze during the installation, this may be a "
"problem with hardware detection. In this case the automatic detection of "
"hardware may be bypassed and dealt with later. To try this, type "
"<code>noauto</code> at the prompt. This option may also be combined with "
"other options as necessary."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/installer.xml:244
msgid "RAM problem"
msgstr "RAM hiba"

#. type: Content of: <section><section><section><para>
#: en/installer.xml:246
msgid ""
"These will rarely be needed, but in some cases the hardware may report the "
"available RAM incorrectly. To specify this manually, you can use the "
"<code>mem=xxxM</code> parameter, where xxx is the correct amount of RAM. e."
"g. <code>mem=256M</code> would specify 256MB of RAM."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/installer.xml:253
msgid "Dynamic partitions"
msgstr "Dinamikus partíciók"

#. type: Content of: <section><section><section><para>
#: en/installer.xml:255
msgid ""
"If you converted your hard disk from \"basic\" format to \"dynamic\" format "
"on Microsoft Windows, you must know that it is impossible to install Mageia "
"on this disc. To go back to a basic disk, see the Microsoft documentation: "
"<link ns2:href=\"http://msdn.microsoft.com/en-us/library/cc776315.aspx"
"\">http://msdn.microsoft.com/en-us/library/cc776315.aspx</link>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/installUpdates.xml:3
msgid "Updates"
msgstr "Frissítések"

#.  Made by marja on 2012 03 30 
#.  NEEDS TO BE REVIEWED! 
#.  marja 20120418 removed xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg"" from section tag, trying to restore correct html filename
#.  marja, 2012-04-24 added screenshot 
#. type: Content of: <section><mediaobject>
#: en/installUpdates.xml:13
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></imagedata> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></imagedata> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/installUpdates.xml:19
msgid ""
"Since this version of <application>Mageia</application> was released, some "
"packages will have been updated or improved."
msgstr ""

#. type: Content of: <section><para>
#: en/installUpdates.xml:23
msgid ""
"Choose <guilabel>yes</guilabel> if you wish to download and install them, "
"select <guilabel>no</guilabel> if you don't want to do this now, or if you "
"aren't connected to the Internet"
msgstr ""

#. type: Content of: <section><para>
#: en/installUpdates.xml:28
msgid "Then press <guibutton>Next</guibutton> to continue"
msgstr ""

#. type: Content of: <section><info><title>
#: en/login.xml:1
msgid "Login screen"
msgstr "Bejelentkező képernyő"

#. type: Content of: <section><mediaobject>
#: en/login.xml:1
msgid ""
"<imageobject><imagedata format=\"PNG\" xml:id=\"login-im1\" fileref=\"live-"
"login.png\" align=\"center\" revision=\"1\"/></imageobject>"
msgstr ""
"<imageobject><imagedata format=\"PNG\" xml:id=\"login-im1\" fileref=\"live-"
"login.png\" align=\"center\" revision=\"1\"/></imageobject>"

#. type: Content of: <section><mediaobject><caption><para>
#: en/login.xml:1
msgid "KDM login screen"
msgstr "KDM bejelentkező képernyő"

#. type: Content of: <section><para>
#: en/login.xml:1
msgid "Finally, you will come to the login screen."
msgstr ""

#. type: Content of: <section><para>
#: en/login.xml:1
msgid ""
"Enter your user name and user password, and in a few seconds you will find "
"yourself with a loaded KDE or GNOME desktop, depending on which live medium "
"you used. You can now start using your Mageia installation."
msgstr ""

#. type: Content of: <section><para>
#: en/login.xml:3
msgid ""
"You can find another part of our documentation in <link linkend=\"https://"
"wiki.mageia.org/en/Category:Documentation\">the Mageia wiki</link>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/media_selection.xml:3
msgid "Media Selection (Nonfree)"
msgstr ""

#.  papoteur 2013-04-11  - created 
#.  marja 2013-04-16 added screenshot + made title longer (because it was the same as for add_supplemental_media)
#.  marja 2013-04-16 s/in/during/ as suggested by Tristan Campbell 
#. marja 2013-04-17 s/xml:id="media-selection"/xml:id="media_selection"/ (html filename was wrong)
#. type: Content of: <section><mediaobject>
#: en/media_selection.xml:12
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png"
"\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png"
"\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/media_selection.xml:18
msgid ""
"Here you have the list of available repositories. Not all repositories are "
"available, according to which media you use for installing. The repositories "
"selection determines which packages will be available for selection during "
"the next steps."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:25
msgid ""
"The <emphasis>Core</emphasis> repository cannot be disabled as it contains "
"the base of the distribution."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:30
msgid ""
"The <emphasis>Nonfree</emphasis> repository includes packages that are free-"
"of-charge, i.e. Mageia may redistribute them, but they contain closed-source "
"software (hence the name - Nonfree). For example this repository includes "
"nVidia and ATI graphics card proprietary drivers, firmware for various WiFi "
"cards, etc."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:38
msgid ""
"The <emphasis>Tainted</emphasis> repository includes packages released under "
"a free license. The main criteria for placing packages in this repository is "
"that they may infringe patents and copyright laws in some countries, e.g. "
"Multimedia codecs needed to play various audio/video files; packages needed "
"to play commercial video DVD, etc."
msgstr ""

#. type: Content of: <section><info><title>
#: en/minimal-install.xml:12
msgid "Minimal Install"
msgstr "Minimális telepítő"

#. type: Content of: <section><para>
#: en/minimal-install.xml:19
msgid ""
"You can choose a Minimal Installation by de-selecting everything in the "
"Package Group Selection screen, see <xref linkend=\"choosePackageGroups\"></"
"xref>."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:22
msgid ""
"If desired, you can additionally tick the \"Individual package selection\" "
"option in the same screen."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:24
msgid ""
"Minimal Installation is intended for those with specific uses in mind for "
"their <application>Mageia</application>, such as a server or a specialised "
"workstation. You will probably use this option combined with the "
"\"Individual package selection\" option mentioned above, to fine-tune your "
"installation, see <xref linkend=\"choosePackagesTree\"></xref>."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:29
msgid ""
"If you choose this installation class, then the related screen will offer "
"you a few useful extras to install, such as documentation and X."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:31
msgid ""
"If selected, \"With X\" will also include IceWM as lightweight desktop "
"environment."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:33
msgid ""
"The basic documentation is provided in the form of man and info pages.  It "
"contains the man pages from the <link xlink:href=\"http://www.tldp.org/"
"manpages/man.html\">Linux Documentation Project</link> and the <link xlink:"
"href=\"http://www.gnu.org/software/coreutils/manual/\">GNU coreutils</link> "
"info pages."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/minimal-install.xml:41
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></imagedata> "
"</imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></imagedata> "
"</imageobject>"

#. type: Content of: <section><info><title>
#: en/misc-params.xml:3
msgid "Summary of miscellaneous parameters"
msgstr ""

#.  Lebarhon 2016 12 16 updated for Mageia 6. 20170209 updated SC
#. type: Content of: <section><mediaobject>
#: en/misc-params.xml:10
msgid ""
"<imageobject> <imagedata fileref=\"dx2-summaryTop.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-summaryTop.png\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/misc-params.xml:15
msgid ""
"DrakX made smart choices for the configuration of your system depending on "
"the choices you made and on the hardware DrakX detected. You can check the "
"settings here and change them if you want after pressing "
"<guibutton>Configure</guibutton>."
msgstr ""

#. type: Content of: <section><note><para>
#: en/misc-params.xml:21
msgid ""
"As a general rule, default settings are recommended and you can keep them "
"with 3 exceptions:"
msgstr ""

#. type: Content of: <section><note><para><itemizedlist><listitem><para>
#: en/misc-params.xml:24
msgid "there are known issues with a default setting"
msgstr ""

#. type: Content of: <section><note><para><itemizedlist><listitem><para>
#: en/misc-params.xml:28
msgid "the default setting has already been tried and it fails"
msgstr ""

#. type: Content of: <section><note><para><itemizedlist><listitem><para>
#: en/misc-params.xml:32
msgid "something else is said in the detailed sections below"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:39
msgid "System parameters"
msgstr "Rendszer paraméterek"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:44
msgid "<guilabel>Timezone</guilabel>"
msgstr "<guilabel>Időzóna</guilabel>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:46
msgid ""
"DrakX selected a time zone for you, depending on your preferred language. "
"You can change it if needed. See also <xref linkend=\"configureTimezoneUTC\"/"
">"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:52
msgid "<guilabel>Country / Region</guilabel>"
msgstr "<guilabel>Ország / Régió</guilabel>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:55
msgid ""
"If you are not in the selected country, it is very important that you "
"correct the setting. See <xref linkend=\"selectCountry\"/>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:61
msgid "<guilabel>Bootloader</guilabel>"
msgstr "<guilabel>Rendszerbetöltő</guilabel>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:63
msgid "DrakX has made good choices for the bootloader setting."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:66
msgid "Do not change anything, unless you know how to configure Grub2"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:69
msgid "For more information, see <xref linkend=\"setupBootloader\"/>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:74
msgid "<guilabel>User management</guilabel>"
msgstr "<guilabel>Felhasználókezelő</guilabel>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:77
msgid ""
"You can add extra users here. They will each get their own <literal>/home</"
"literal> directories."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:83
msgid "<guilabel>Services</guilabel>:"
msgstr "<guilabel>Szolgálatások</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:85
msgid ""
"System services refer to those small programs which run the background "
"(daemons). This tool allows you to enable or disable certain tasks."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:89
msgid ""
"You should check carefully before changing anything here - a mistake may "
"prevent your computer from operating correctly."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:93
msgid "For more information, see <xref linkend=\"configureServices\"/>"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:100
msgid "Hardware parameters"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:105
msgid "<guilabel>Keyboard</guilabel>:"
msgstr "<guilabel>Billentyűzet</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:107
msgid ""
"This is where you setup or change your keyboard layout which will depend on "
"your location, language or type of keyboard."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><note><para>
#: en/misc-params.xml:112
msgid ""
"If you notice a wrong keyboard layout and want to change it, keep in mind "
"that your passwords are going to change too."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:118
msgid "<guilabel>Mouse</guilabel>:"
msgstr "<guilabel>Egér</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:120
msgid ""
"Here you can add or configure other pointing devices, tablets, trackballs "
"etc."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:125
msgid "<guilabel>Sound card</guilabel>:"
msgstr "<guilabel>Hangkártya</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:128
msgid ""
"The installer uses the default driver, if there is a default one. The option "
"to select a different driver is only given when there is more than one "
"driver for your card, but none of them is the default one."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:135
msgid "<guilabel>Graphical interface</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:138
msgid "This section allows you to configure your graphic card(s) and displays."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:141
msgid "For more information, see <xref linkend=\"configureX_chooser\"/>."
msgstr ""

#. type: Content of: <section><section><mediaobject>
#: en/misc-params.xml:147
msgid ""
"<imageobject> <imagedata format=\"PNG\" xml:id=\"summaryBottom-im1\" align="
"\"center\" fileref=\"dx2-summaryBottom.png\" revision=\"1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" xml:id=\"summaryBottom-im1\" align="
"\"center\" fileref=\"dx2-summaryBottom.png\" revision=\"1\"/> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:155
msgid "Network and Internet parameters"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:161
msgid "<guilabel>Network</guilabel>:"
msgstr "<guilabel>Hálózat</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:163
msgid ""
"You can configure your network here, but for network cards with non-free "
"drivers it is better to do that after reboot, in the <application>Mageia "
"Control Center</application>, if you have not yet enabled the Nonfree media "
"repositories."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><warning><para>
#: en/misc-params.xml:170
msgid ""
"When you add a network card, do not forget to set your firewall to watch "
"that interface as well."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:177
msgid "<guilabel>Proxies</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:179
msgid ""
"A Proxy Server acts as an intermediary between your computer and the wider "
"internet.  This section allows you to configure your computer to utilize a "
"proxy service."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:184
msgid ""
"You may need to consult your systems administrator to get the parameters you "
"need to enter here"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:193
msgid "Security"
msgstr "Biztonság"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:198
msgid "<guilabel>Security Level</guilabel>:"
msgstr "<guilabel>Biztonsági szint</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:201
msgid ""
"Here you set the Security level for your computer, in most cases the default "
"setting (Standard) is adequate for general use."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:205
msgid "Check the option which best suits your usage."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:210
msgid "<guilabel>Firewall</guilabel>:"
msgstr "<guilabel>Tűzfal</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:212
msgid ""
"A firewall is intended to be a barrier between your important data and the "
"rascals out there on the internet who would compromise or steal it."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:216
msgid ""
"Select the services that you wish to have access to your system. Your "
"selections will depend on what you use your computer for. For more "
"information, see <xref linkend=\"firewall\"/>."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><warning><para>
#: en/misc-params.xml:222
msgid "Bear in mind that allowing everything (no firewall) may be very risky."
msgstr ""

#. type: Content of: <section><info><title>
#: en/reboot.xml:3
msgid "Reboot"
msgstr "Újraindítás"

#. type: Content of: <section><para>
#: en/reboot.xml:6
msgid ""
"Once the bootloader has been installed, you will be prompted to halt your "
"computer, remove the live CD and restart the computer, click on <emphasis "
"role=\"bold\"><guibutton>Finish</guibutton></emphasis> and act as "
"asked<emphasis role=\"bold\"> in this order!</emphasis>"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/reboot.xml:11
msgid "<imageobject> <imagedata fileref=\"live-reboot2.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"live-reboot2.png\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/reboot.xml:15
msgid ""
"When you restart, you will see a succession of download progress bars. These "
"indicate that the software media lists are being downloaded (see Software "
"management)."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/reboot.xml:17
msgid ""
"<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=\"live-"
"reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=\"live-"
"reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>"

#. type: Content of: <section><info><title>
#: en/resizeFATChoose.xml:16
msgid ""
"Resize <application>Windows<superscript>®</superscript></application> "
"partition"
msgstr ""
"<application>Windows<superscript>®</superscript></application> partíciók "
"átméretezése"

#. type: Content of: <section><para>
#: en/resizeFATChoose.xml:20
msgid ""
"You have more than one <application>Windows<superscript>®</superscript></"
"application> partition.  Choose which one should be made smaller to make "
"space for installing <application>Mageia</application>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/securityLevel.xml:12
msgid "Security Level"
msgstr "Biztonsági szint"

#.  2012-12-25 marja - moved this part out of misc-params.xml" 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/securityLevel.xml:19
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/securityLevel.xml:24
msgid "You can adjust your security level here."
msgstr ""

#. type: Content of: <section><para>
#: en/securityLevel.xml:27
msgid ""
"Leave the default settings as they are, if you don't know what to choose."
msgstr ""

#. type: Content of: <section><para>
#: en/securityLevel.xml:30
msgid ""
"After install, it will always be possible to adjust your security settings "
"in the <guilabel>Security</guilabel> part of the Mageia Control Center."
msgstr ""

#. type: Content of: <section><info><title>
#: en/SelectAndUseISOs2.xml:6
msgid "Select and use ISOs"
msgstr "ISO kiválasztás és használat"

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:9
msgid "Introduction"
msgstr "Bevezetés"

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:10
msgid ""
"Mageia is distributed via ISO images. This page will help you to choose "
"which image match your needs."
msgstr ""

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:12
msgid "There is two families of media:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:15
msgid ""
"Classical installer: After booting the media, it will follow a process "
"allowing to choose what to install and how to configure your target system. "
"This give you the maximal flexibility for a customized installation, in "
"particular to choose which Desktop Environment you will install."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:22
msgid ""
"LIVE media: you can boot the media in a real Mageia system without "
"installing it, to see what you will get after installation.  The "
"installation process is simpler, but you get lesser choices."
msgstr ""

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:28
msgid "Details are given in the next sections."
msgstr ""

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:31
msgid "Media"
msgstr "Media"

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:33
msgid "Definition"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:34
msgid ""
"Here, a medium (plural: media) is an ISO image file that allows you to "
"install and/or update Mageia and by extension any physical support the ISO "
"file is copied to."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:37
msgid ""
"You can find them <link ns4:href=\"http://www.mageia.org/en/downloads/"
"\">here</link>."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:40
msgid "Classical installation media"
msgstr "Klasszikus telepítőmédia"

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:42 en/SelectAndUseISOs2.xml:73
#: en/SelectAndUseISOs2.xml:142
msgid "Common features"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:45
msgid "These ISOs use the traditional installer called drakx."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:49
msgid ""
"They are able to make a clean install or an update from previous releases."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:53 en/SelectAndUseISOs2.xml:84
#: en/SelectAndUseISOs2.xml:159
msgid "Different media for 32 or 64 bit architectures."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:56
msgid ""
"Some tools are available in the Welcome screen: Rescue System, Memory Test, "
"Hardware Detection Tool."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:60
msgid "Each DVD contains many available desktop environments and languages."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:64
msgid ""
"You'll be given the choice during the installation to add non free software."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:71
msgid "Live media"
msgstr "Élő lemezkép"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:76
msgid ""
"Can be used to preview the distribution without installing it on a HDD, and "
"optionally install Mageia on to your HDD."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:80
msgid "Each ISO contains only one desktop environment (Plasma, GNOME or Xfce)."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:87
msgid ""
"<emphasis role=\"bold\">Live ISOs can only be used to create clean "
"installations, they cannot be used to upgrade from previous releases.</"
"emphasis>"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:92
msgid "They contain non free software."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:97
msgid "Live DVD Plasma"
msgstr "Élő Plasma DVD"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:100
msgid "Plasma desktop environment only."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:103 en/SelectAndUseISOs2.xml:117
#: en/SelectAndUseISOs2.xml:131
msgid "All languages are present."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:106
msgid "64 bit architecture only."
msgstr "Csak 64 bites architektúra"

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:111
msgid "Live DVD GNOME"
msgstr "Élő GNOME DVD"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:114
msgid "GNOME desktop environment only."
msgstr "Csak GNOME ablakkezelő."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:120
msgid "64 bit architecture only"
msgstr "Csak 64 bites architektúra"

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:125
msgid "Live DVD Xfce"
msgstr "Élő Xfce DVD"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:128
msgid "Xfce desktop environment only."
msgstr "Csak Xfce ablakkezelő."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:134
msgid "32 or 64 bit architectures."
msgstr "32 vagy 64 bites architektúrák."

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:140
msgid "Boot-only CD media"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:145
msgid ""
"Each one is a small image that contains no more than that which is needed to "
"start the drakx installer and find drakx-installer-stage2 and other packages "
"that are needed to continue and complete the install. These packages may be "
"on the PC hard disk, on a local drive, on a local network or on the Internet."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:153
msgid ""
"These media are very light (less than 100 MB) and are convenient when "
"bandwidth is too low to download a full DVD, a PC without a DVD drive or a "
"PC that can't boot from a USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:162
msgid "English language only."
msgstr "Csak Angol nyelv."

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:167
msgid "netinstall.iso"
msgstr "netinstall.iso"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:170
msgid ""
"Contains only free software, for those people who prefer not to use non-free "
"software."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:175
msgid "netinstall-nonfree.iso"
msgstr "netinstall-nonfree.iso"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:178
msgid ""
"Contains non-free software (mostly drivers, codecs...) for people who need "
"it."
msgstr ""

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:186
msgid "Downloading and Checking Media"
msgstr "Mageia letöltése és ellenőrzése"

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:188
msgid "Downloading"
msgstr "Letöltés"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:189
msgid ""
"Once you have chosen your ISO file, you can download it using either http or "
"BitTorrent. In both cases, a window gives you some information, such as the "
"mirror in use and an opportunity to change if the bandwidth is to low. If "
"http is chosen, you may also see something like"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:191
msgid "<imageobject> <imagedata fileref=\"Checking.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"Checking.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:195
msgid ""
"md5sum and sha1sum are tools to check the ISO integrity. Use only one of "
"them. Keep one of them <link linkend=\"integrity\">for further usage</link>. "
"Then a window similar to this one appears:"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:199
msgid "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:203
msgid "Check the radio button Save File."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:206
msgid "Checking the integrity of the downloaded media"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:207
msgid ""
"Both checksums are hexadecimal numbers calculated by an algorithm from the "
"file to be downloaded. When you ask these algorithms to recalculate this "
"number from your downloaded file, either you have the same number and your "
"downloaded file is correct, or the number is different and you have a "
"failure. A failure infers that you should retry the download or attempt a "
"repair using BitTorrent."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:213
msgid "Open a console, no need to be root, and:"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:214
msgid ""
"- To use md5sum, type: [sam@localhost]$ <userinput>md5sum path/to/the/image/"
"file.iso</userinput>."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:216
msgid ""
"- To use sha1sum, type: [sam@localhost]$ <userinput>sha1sum path/to/the/"
"image/file.iso</userinput>."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:218
msgid ""
"and compare the obtained number on your computer (you may have to wait for a "
"while) with the number given by Mageia. Example:"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:221
msgid "<imageobject> <imagedata fileref=\"../Md5sum.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"../Md5sum.png\"/> </imageobject>"

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:229
msgid "Burn or dump the ISO"
msgstr ""

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:230
msgid ""
"The checked ISO can now be burned to a CD or DVD or dumped to a USB stick. "
"These operations are not a simple copy and aim to make a bootable medium."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:234
msgid "Burning the ISO to a CD/DVD"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:235
msgid ""
"Use whatever burner you wish but ensure the burning device is set correctly "
"to <emphasis role=\"bold\">burn an image</emphasis>, burn data or files is "
"not correct. There is more information in <link ns4:href=\"https://wiki."
"mageia.org/en/Writing_CD_and_DVD_images\">the Mageia wiki</link>."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:241
msgid "Dump the ISO to a USB stick"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:242
msgid ""
"All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick "
"and then use it to boot and install the system."
msgstr ""

#. type: Content of: <section><section><section><warning><para>
#: en/SelectAndUseISOs2.xml:245
msgid ""
"\"Dumping\" an image onto a flash device destroys any previous file-system "
"on the device; any other data will be lost and the partition capacity will "
"be reduced to the image size."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:249
msgid ""
"To recover the original capacity, you must redo partitioning and re-format "
"the USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:252
msgid "Using a graphical tool within Mageia"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:253
msgid ""
"You can use a graphical tool like <link ns4:href=\"https://wiki.mageia.org/"
"en/IsoDumper_Writing_ISO_images_on_USB_sticks\">IsoDumper</link>"
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:256
msgid "Using a graphical tool within Windows"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:257
msgid "You could try:"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:258
msgid ""
"- <link ns4:href=\"http://rufus.akeo.ie/?locale=en_US\">Rufus</link> using "
"the \"ISO image\" option;"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:260
msgid ""
"- <link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 "
"Disk Imager</link>"
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:264
msgid "Using Command line within a GNU/Linux system"
msgstr ""

#. type: Content of: <section><section><section><section><warning><para>
#: en/SelectAndUseISOs2.xml:266
msgid ""
"It is potentially *dangerous* to do this by hand. You risk to overwrite a "
"disc partition if you get the device-ID wrong."
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:269
msgid "You can also use the dd tool in a console:"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:272
msgid "Open a console"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:275
msgid ""
"Become root with the command <userinput>su -</userinput> (don't forget the "
"final '-' )"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject>
#: en/SelectAndUseISOs2.xml:278
msgid "<imageobject> <imagedata fileref=\"../Root.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"../Root.png\"/> </imageobject>"

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:284
msgid ""
"Plug in your USB stick (do not mount it, this also means do not open any "
"application or file manager that could access or read it)"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:289
msgid "Enter the command <userinput>fdisk -l</userinput>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject>
#: en/SelectAndUseISOs2.xml:291
msgid "<imageobject> <imagedata fileref=\"../Fdisk.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"../Fdisk.png\"/> </imageobject>"

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:295
msgid ""
"Alternatively, you can get the device name with the command <code>dmesg</"
"code>: at end, you see the device name starting with <emphasis>sd</"
"emphasis>, and <emphasis>sdd</emphasis> in this case:"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><screen>
#: en/SelectAndUseISOs2.xml:299
#, no-wrap
msgid ""
"[72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd\n"
"[72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000\n"
"[72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3\n"
"[72594.770536] usb 1-1: Product: Mass Storage Device\n"
"[72594.770537] usb 1-1: Manufacturer: JetFlash\n"
"[72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB\n"
"[72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes\n"
"[72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes\n"
"[72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected\n"
"[72594.772447] scsi host8: usb-storage 1-1:1.0\n"
"[72595.963238] scsi 8:0:0:0: Direct-Access     JetFlash Transcend 2GB    1100 PQ: 0 ANSI: 4\n"
"[72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)\n"
"[72595.964104] sd 8:0:0:0: [sdd] Write Protect is off\n"
"[72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00\n"
"[72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found\n"
"[72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through\n"
"[72595.967251]  <emphasis>sdd</emphasis>: sdd1\n"
"[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:319
msgid ""
"Find the device name for your USB stick (by its size), for example <code>/"
"dev/sdb</code> in the screenshot above, it is a 8GB USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:324
msgid ""
"Enter the command: # <userinput>dd if=path/to/the/ISO/file of=/dev/sdX "
"bs=1M</userinput>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:326
msgid "Where X=your device name eg: /dev/sdc"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:327
msgid ""
"Example: # <userinput>dd if=/home/user/Downloads/Mageia-6-x86_64-DVD.iso of=/"
"dev/sdb bs=1M</userinput>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:330
msgid "Enter the command: # <userinput>sync</userinput>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:333
msgid "Unplug your USB stick, it is done"
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectCountry.xml:3
msgid "Select your Country / Region"
msgstr "Ország / Régió kiválasztása"

#.  Lebarhon 2016 12 16 updated for Mageia 6
#. type: Content of: <section><mediaobject>
#: en/selectCountry.xml:9
msgid ""
"<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" align="
"\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" align="
"\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/selectCountry.xml:14
msgid ""
"Select your country or region.  This is important for all kinds of settings, "
"like the currency and wireless regulatory domain. Setting the wrong country "
"can lead to not being able to use a Wireless network."
msgstr ""

#. type: Content of: <section><para>
#: en/selectCountry.xml:19
msgid ""
"If your country isn't in the list, click the <guilabel>Other Countries</"
"guilabel> button and choose your country / region there."
msgstr ""

#. type: Content of: <section><note><para>
#: en/selectCountry.xml:24
msgid ""
"If your country is only in the <guilabel>Other Countries</guilabel> list, "
"after clicking <guibutton>OK</guibutton> it may seem a country from the "
"first list was chosen. Please ignore this, DrakX will follow your real "
"choice."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/selectCountry.xml:32
msgid "Input method"
msgstr ""

#. type: Content of: <section><section><para>
#: en/selectCountry.xml:35
msgid ""
"In the <guilabel>Other Countries</guilabel> screen you can also select an "
"input method (at the bottom of the list). Input methods allow users to input "
"multilingual characters (Chinese, Japanese, Korean, etc). IBus is the "
"default input method, so users should not need to configure it manually. "
"Other input methods(SCIM, GCIN, HIME, etc) also provide similar functions "
"and can be installed if you added HTTP/FTP media before package selection."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/selectCountry.xml:44
msgid ""
"If you missed the input method setup during installation, you can access it "
"after you boot your installed system via \"Configure your Computer\" -> "
"\"System\", or by running localedrake as root."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectInstallClass.xml:21
msgid "Install or Upgrade"
msgstr "Telepítés vagy Frissítés"

#. type: Content of: <section><mediaobject>
#: en/selectInstallClass.xml:25
msgid ""
"<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" align="
"\"center\" format=\"PNG\"></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" align="
"\"center\" format=\"PNG\"></imagedata> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:32
msgid "Install"
msgstr "Telepítés"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:34
msgid ""
"Use this option for a fresh <application>Mageia</application> installation."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:39
msgid "Upgrade"
msgstr "Frissítés"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:41
msgid ""
"If you have one or more <application>Mageia</application> installations on "
"your system, the installer will allow you to upgrade one of them to the "
"latest release."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><warning><para>
#: en/selectInstallClass.xml:45
msgid ""
"Only upgrading from a previous Mageia version that was <emphasis>still "
"supported</emphasis> when this installer's version was released, has been "
"thoroughly tested. If you want to upgrade a Mageia version that had already "
"reached its End\tOf Life when this one was released, then it is better to do "
"a clean install while preserving your <literal>/home</literal> partition."
msgstr ""

#. type: Content of: <section><note><para>
#: en/selectInstallClass.xml:56
msgid ""
"If during install you decide to stop the installation, it is possible to "
"reboot, but please think twice before you do this. Once a partition has been "
"formatted or updates have started to be installed, your computer isn't in "
"the same state anymore and rebooting it could very well leave you with an "
"unusable system. If in spite of that you are very sure rebooting is what you "
"want, go to a text terminal by pressing the three keys <guilabel>Alt Ctrl "
"F2</guilabel> at the same time. After that, press <guilabel>Alt Ctrl Delete</"
"guilabel> simultaneously to reboot."
msgstr ""

#. type: Content of: <section><tip><para>
#: en/selectInstallClass.xml:67
msgid ""
"If you have discovered that you forgot to select an additional language, you "
"can return from the \"Install or Upgrade\" screen to the language choice "
"screen by pressing <guilabel>Alt Ctrl Home</guilabel>. Do <emphasis>not</"
"emphasis> do this later in the install."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectKeyboardLive.xml:3
msgid "Select keyboard"
msgstr "Billentyűzet kiválasztás"

#. type: Content of: <section><mediaobject>
#: en/selectKeyboardLive.xml:7
msgid ""
"<imageobject> <imagedata xml:id=\"selectKeyboardLive-im1\" revision=\"1\" "
"align=\"center\" format=\"PNG\" fileref=\"live-selectKeyboard.png\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata xml:id=\"selectKeyboardLive-im1\" revision=\"1\" "
"align=\"center\" format=\"PNG\" fileref=\"live-selectKeyboard.png\"/> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/selectKeyboardLive.xml:12
msgid ""
"You will be required to set the keyboard layout you wish to use in Mageia​​. "
"The default one is selected according to your language and timezone "
"previously selected."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectKeyboard.xml:14
msgid "Keyboard"
msgstr "Billentyűzet"

#. type: Content of: <section><para>
#: en/selectKeyboard.xml:17
msgid ""
"DrakX selects an appropriate keyboard for your language. If no suitable "
"keyboard is found it will default to a US keyboard layout."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/selectKeyboard.xml:22
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png"
"\" /> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png"
"\" /> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:30
msgid ""
"Make sure that the selection is correct or choose another keyboard layout. "
"If you don't know which layout your keyboard has, look in the specifications "
"that came with your system, or ask the computer vendor. There may even be a "
"label on the keyboard that identifies the layout. You can also look here: "
"<link xlink:href=\"http://en.wikipedia.org/wiki/Keyboard_layout\">en."
"wikipedia.org/wiki/Keyboard_layout</link>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:40
msgid ""
"If your keyboard isn't in the list shown, click on <guibutton>More</"
"guibutton> to get a full list, and select your keyboard there."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para><warning><para>
#: en/selectKeyboard.xml:45
msgid ""
"After choosing a keyboard from the <guibutton>More</guibutton> dialog, "
"you'll return to the first keyboard choice dialog and it will seem as though "
"a keyboard from that screen was chosen. You can safely ignore this anomaly "
"and continue the installation: Your keyboard is the one you chose from the "
"full list."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:55
msgid ""
"If you choose a keyboard based on non-Latin characters, you will see an "
"extra dialog screen asking how you would prefer to switch between the Latin "
"and non-Latin keyboard layouts"
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectLanguage.xml:10
msgid "Please choose a language to use"
msgstr "Válasszon nyelvet"

#. type: Content of: <section><para>
#: en/selectLanguage.xml:12
msgid ""
"Select your preferred language, by first expanding the list for your "
"continent. <application>Mageia</application> will use this selection during "
"the installation and for your installed system."
msgstr ""

#. type: Content of: <section><para>
#: en/selectLanguage.xml:16
msgid ""
"Select your preferred language.  <application>Mageia</application> will use "
"this selection during the installation and for your installed system."
msgstr ""

#. type: Content of: <section><para>
#: en/selectLanguage.xml:19
msgid ""
"If it is likely that you will require several languages installed on your "
"system, for yourself or other users, then you should use the "
"<guibutton>Multiple languages</guibutton> button to add them now. It will be "
"difficult to add extra language support after installation."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/selectLanguage.xml:25
msgid ""
"<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref="
"\"dx2-selectLanguage.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-language.png\" format=\"\"/> </"
"imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref="
"\"dx2-selectLanguage.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-language.png\" format=\"\"/> </"
"imageobject>"

#. type: Content of: <section><warning><para>
#: en/selectLanguage.xml:33
msgid ""
"Even if you choose more than one language, you must first choose one of them "
"as your preferred language in the first language screen. It will also be "
"marked as chosen in the multiple languages screen ."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:39
msgid ""
"If your keyboard language is not the same as your preferred language, then "
"it is advisable to install the language of your keyboard as well."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:44
msgid "Mageia uses UTF-8 (Unicode) support by default."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:45
msgid ""
"This may be disabled in the \"multiple languages\" screen if you know that "
"it is inappropriate for your language. Disabling UTF-8 applies to all "
"installed languages."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:50
msgid ""
"You can change the language of your system after installation in the Mageia "
"Control Center -> System -> Manage localization for your system."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectMouse.xml:4
msgid "Select mouse"
msgstr "Egér kiválasztás"

#.  Made by marja on 2012 04 11 
#.  NEEDS TO BE REVIEWED! 
#.  adding some "real" text now that we know the page shows up in the right place
#.  marja 2012-04-24 adding screenshot 
#. type: Content of: <section><mediaobject>
#: en/selectMouse.xml:16
msgid ""
"<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" "
"format=\"PNG\" > </imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" "
"format=\"PNG\" > </imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/selectMouse.xml:23
msgid ""
"If you are not happy with how your mouse responds, you can select a "
"different one here."
msgstr ""

#. type: Content of: <section><para>
#: en/selectMouse.xml:25
msgid ""
"Usually, <guilabel>Universal</guilabel> - <guilabel>Any PS/2 and USB mice</"
"guilabel> is a good choice."
msgstr ""

#. type: Content of: <section><para>
#: en/selectMouse.xml:27
msgid ""
"Select <guilabel>Universal</guilabel> - <guilabel>Force evdev</guilabel> to "
"configure the buttons that do not work on a mouse with six or more buttons."
msgstr ""

#. type: Content of: <section><info><title>
#: en/setupBootloaderAddEntry.xml:6
msgid "Add or Modify a Boot Menu Entry"
msgstr ""

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:9
msgid ""
"To do that you need to manually edit /boot/grub2/custom.cfg or use the "
"software grub-customizer instead (Available in the Mageia repositories)."
msgstr ""

#. type: Content of: <section><note><para>
#: en/setupBootloaderAddEntry.xml:13
msgid ""
"For more information, see our wiki: <link ns2:href=\"https://wiki.mageia.org/"
"en/Grub2-efi_and_Mageia\">https://wiki.mageia.org/en/Grub2-efi_and_Mageia</"
"link>"
msgstr ""

#. type: Content of: <section><info><title>
#: en/setupBootloader.xml:9
msgid "Bootloader main options"
msgstr "Rendszerindítási beállítások"

#. type: Content of: <section><section><title>
#: en/setupBootloader.xml:13
msgid "Bootloader interface"
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:15
msgid "By default, Mageia uses exclusively:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:19
msgid ""
"Grub2 (with or without graphical menu) for a Legacy/MBR or Legacy/GPT system"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:24
msgid "Grub2-efi for a UEFI system."
msgstr ""

#. type: Content of: <section><section><tip><para>
#: en/setupBootloader.xml:29
msgid "The Mageia graphical menus are nice :)"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/setupBootloader.xml:33
msgid "Grub2 on Legacy/MBR and Legacy/GPT systems"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/setupBootloader.xml:36
msgid ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"setupBootloader.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata xml:id=\"setupBootloader-im1\" fileref=\"live-"
"setupBootloader.png\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"setupBootloader.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata xml:id=\"setupBootloader-im1\" fileref=\"live-"
"setupBootloader.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para>
#: en/setupBootloader.xml:45 en/setupBootloader.xml:73
msgid ""
"Don't modify the \"Boot Device\" unless you really know what you are doing."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/setupBootloader.xml:50
msgid "Grub2-efi on UEFI systems"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/setupBootloader.xml:52
msgid ""
"With an UEFI system, the user interface is slightly different as you cannot "
"choose between with or without graphical menu"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/setupBootloader.xml:56
msgid ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"setupBootloader2.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-setupBootloader2.png\"/> </"
"imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"setupBootloader2.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-setupBootloader2.png\"/> </"
"imageobject>"

#. type: Content of: <section><section><section><para>
#: en/setupBootloader.xml:65
msgid ""
"If Mageia is the only system installed on your computer, the installer "
"created an ESP (EFI System Partition) to receive the bootloader (Grub2-efi). "
"If there are already UEFI operating systems installed on your computer "
"(Windows 8 for example), the Mageia installer detects the existing ESP "
"created by Windows and adds grub2-efi. Although it is possible to have "
"several ESPs, only one is advised and enough whatever the number of "
"operating systems you have."
msgstr ""

#. type: Content of: <section><section><title>
#: en/setupBootloader.xml:79
msgid "Using a Mageia bootloader"
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:81
msgid "By default, according to your system, Mageia writes a new:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:85
msgid ""
"GRUB2 bootloader either into the MBR (Master Boot Record) of your first hard "
"drive or in the BIOS boot partition."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:90
msgid "Grub2-efi bootloader into the ESP"
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:94
msgid ""
"If you already have other operating systems installed, Mageia attempts to "
"add them to your new Mageia boot menu. If you don't want this behaviour, "
"click on <guibutton>Next</guibutton> and then uncheck the box "
"<guilabel>Probe Foreign OS</guilabel>"
msgstr ""

#. type: Content of: <section><section><mediaobject>
#: en/setupBootloader.xml:100
msgid ""
"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
"\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live"
"\"> <imagedata fileref=\"live-setupBootloader3.png\" align=\"center\"/> </"
"imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
"\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live"
"\"> <imagedata fileref=\"live-setupBootloader3.png\" align=\"center\"/> </"
"imageobject>"

#. type: Content of: <section><section><title>
#: en/setupBootloader.xml:111
msgid "Using an existing bootloader"
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:113
msgid ""
"The exact procedure for adding your Mageia system to an existing bootloader "
"is beyond the scope of this help, however in most cases it will involve "
"running the relevant bootloader installation program which should detect and "
"add it automatically. See the documentation for the operating system in "
"question."
msgstr ""

#. type: Content of: <section><section><title>
#: en/setupBootloader.xml:121
msgid "Using chain loading"
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:123
msgid ""
"If you don't want a bootable Mageia, but to chain load it from another OS, "
"click on <guibutton>Next</guibutton>, then on <guibutton>Advanced</"
"guibutton> and Check the box <guilabel>Do not touch ESP or MBR</guilabel>."
msgstr ""

#. type: Content of: <section><section><mediaobject>
#: en/setupBootloader.xml:129
msgid ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"setupBootloader4.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-setupBootloader4.png\" align="
"\"center\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"setupBootloader4.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-setupBootloader4.png\" align="
"\"center\"/> </imageobject>"

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:138
msgid ""
"You will get a warning that the bootloader is missing, ignore it by clicking "
"<guibutton>OK</guibutton>."
msgstr ""

#. type: Content of: <section><section><mediaobject>
#: en/setupBootloader.xml:142
msgid ""
"<imageobject> <imagedata fileref=\"live-setupBootloader5.png\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"live-setupBootloader5.png\"/> </"
"imageobject>"

#. type: Content of: <section><section><title>
#: en/setupBootloader.xml:149
msgid "Options"
msgstr "Beállítások"

#. type: Content of: <section><section><section><title>
#: en/setupBootloader.xml:152
msgid "First page"
msgstr "Előző oldal"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/setupBootloader.xml:156
msgid ""
"<guilabel>Delay before booting the default image</guilabel>: This text box "
"lets you set a delay in seconds before the default operating system is "
"started up."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/setupBootloader.xml:162
msgid ""
"<guilabel>Security</guilabel>: This allows you to set a password for the "
"bootloader. This means a username and password will be asked at the boot "
"time to select a booting entry or change settings. The username is \"root\" "
"and the password is the one chosen here after."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/setupBootloader.xml:170
msgid ""
"<guilabel>Password</guilabel>: This text box is where you actually put the "
"password"
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/setupBootloader.xml:175
msgid ""
"<guilabel>Password (again)</guilabel>: Retype the password and Drakx will "
"check that it matches with the one set above."
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:181 en/setupBootloader.xml:239
msgid "<guilabel>Advanced</guilabel>"
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/setupBootloader.xml:185
msgid ""
"<guilabel>Enable ACPI:</guilabel> ACPI (Advanced Configuration and Power "
"Interface) is a standard for the power management. It can save energy by "
"stopping unused devices, this was the method used before APM. Unchecking it "
"could be useful if, for example, your computer does not support ACPI or if "
"you think the ACPI implementation might cause some problems (for instance "
"random reboots or system lockups)."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/setupBootloader.xml:195
msgid ""
"<guilabel>Enable SMP</guilabel>: This option enables / disables symmetric "
"multiprocessing for multi core processors."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/setupBootloader.xml:201
msgid ""
"<guilabel>Enable APIC</guilabel>: Enabling or disabling this gives the "
"operating system access to the Advanced Programmable Interrupt Controller. "
"APIC devices permit more complex priority models, and Advanced IRQ "
"(Interrupt Request)  management."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/setupBootloader.xml:209
msgid ""
"<guilabel>Enable Local APIC</guilabel>: Here you can set local APIC, which "
"manages all external interrupts for a specific processor in an SMP system."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/setupBootloader.xml:219
msgid "Next page"
msgstr "Következő oldal"

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:223
msgid "<guilabel>Default:</guilabel> Operating system started up by default"
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:228
msgid ""
"<guilabel>Append:</guilabel> This option lets you pass the kernel "
"information or tell the kernel to give you more information as it boots."
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:234
msgid ""
"<guilabel>Probe foreign OS</guilabel>: see above <link linkend="
"\"setupMageiaBootloader\">Using a Mageia bootloader</link>"
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para><itemizedlist><listitem><para>
#: en/setupBootloader.xml:241
msgid ""
"<guilabel>Video mode:</guilabel> This sets the screen size and colour depth "
"the boot menu will use. If you click the down triangle you will be offered "
"other size and colour depth options."
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para><itemizedlist><listitem><para>
#: en/setupBootloader.xml:248
msgid ""
"<emphasis role=\"bold\">Do not touch ESP or MBR</emphasis>: see above <link "
"linkend=\"setupChainLoading\">Using the chain loading</link>"
msgstr ""

#. type: Content of: <section><info><title>
#: en/setupSCSI.xml:11
msgid "Setup SCSI"
msgstr "SCSI beállítás"

#.  Made by marja on 2012 04 02 
#.  NEEDS TO BE REVIEWED! 
#.  JohnR - edited 2012-03-03 
#.  SimonNZG has reviewed 2012-04-03 (changed editted to edited in JohnR's comment ;-) 
#.  barjac has re-reviewed and made some minor tweaks. Revisions incremented. 
#.  marja 2012-04-24 added screenshot 
#.  marja 2012-04-25 replacing John's version 1.6 because that one was based on the
#.        Mdv doc instead of on our setupSCSI file 
#. type: Content of: <section><mediaobject>
#: en/setupSCSI.xml:26
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" format="
"\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" format="
"\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/setupSCSI.xml:32
msgid ""
"DrakX usually detects hard disks correctly. With some older SCSI controllers "
"it may be unable to determine the correct drivers to use and subsequently "
"fail to recognise the drive."
msgstr ""

#. type: Content of: <section><para>
#: en/setupSCSI.xml:36
msgid ""
"If this happens, you will need to manually tell Drakx which SCSI drive(s) "
"you have."
msgstr ""

#. type: Content of: <section><para>
#: en/setupSCSI.xml:39
msgid "DrakX should then be able to configure the drive(s) correctly."
msgstr ""

#. type: Content of: <section><info><title>
#: en/soundConfig.xml:3
msgid "Sound Configuration"
msgstr "Hang beállítása"

#.  Lebarhon 20170209 updated SC
#. type: Content of: <section><mediaobject>
#: en/soundConfig.xml:9
msgid ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-soundConfig.png\" xml:"
"id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-soundConfig.png\" xml:"
"id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/soundConfig.xml:14
msgid ""
"In this screen the name of the driver that the installer chose for your "
"sound card is given, which will be the default driver if we have a default "
"one."
msgstr ""

#. type: Content of: <section><para>
#: en/soundConfig.xml:18
msgid ""
"The default driver should work without problems. However, if after install "
"you do encounter problems, then run <command>draksound</command> or start "
"this tool via MCC (Mageia Control Center), by choosing the "
"<guilabel>Hardware</guilabel> tab and clicking on <guilabel>Sound "
"Configuration</guilabel> at the top right of the screen."
msgstr ""

#. type: Content of: <section><para>
#: en/soundConfig.xml:24
msgid ""
"Then, in the draksound or \"Sound Configuration\" tool screen, click on "
"<guibutton>Advanced</guibutton> and then on <guibutton>Troubleshooting</"
"guibutton> to find very useful advice about how to solve the problem."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/soundConfig.xml:31
msgid "Advanced"
msgstr "Speciális"

#. type: Content of: <section><section><para>
#: en/soundConfig.xml:34
msgid ""
"Clicking <guibutton>Advanced</guibutton> in this screen, during install, is "
"useful if there is no default driver and there are several drivers "
"available, but you think the installer selected the wrong one."
msgstr ""

#. type: Content of: <section><section><para>
#: en/soundConfig.xml:39
msgid ""
"In that case you can select a different driver after clicking on "
"<guibutton>Let me pick any driver</guibutton>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/takeOverHdConfirm.xml:4
msgid "Confirm hard disk to be formatted"
msgstr ""

#.  Made by marja on 2012 04 03 
#.  test comment - johnr 
#.  2012-04-24 marja - replaced "if you are not sure you selected the correct
#.     hard disk." with "if you are not sure about your choice", because I'm sure I
#.     saw this help screen when I had only one HD 
#.  2013-05-05 marja added screenshot 
#. type: Content of: <section><mediaobject>
#: en/takeOverHdConfirm.xml:19
msgid ""
"<imageobject condition='live'> <imagedata fileref=\"live-takeOverHdConfirm."
"png\" format=\"PNG\" align=\"center\" ></imagedata> </imageobject> "
"<imageobject condition='classical'> <imagedata fileref=\"dx2-"
"takeOverHdConfirm.png\" format=\"PNG\" align=\"center\" ></imagedata> </"
"imageobject>"
msgstr ""
"<imageobject condition='live'> <imagedata fileref=\"live-takeOverHdConfirm."
"png\" format=\"PNG\" align=\"center\" ></imagedata> </imageobject> "
"<imageobject condition='classical'> <imagedata fileref=\"dx2-"
"takeOverHdConfirm.png\" format=\"PNG\" align=\"center\" ></imagedata> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/takeOverHdConfirm.xml:27
msgid ""
"Click on <guibutton>Previous</guibutton> if you are not sure about your "
"choice."
msgstr ""

#. type: Content of: <section><para>
#: en/takeOverHdConfirm.xml:30
msgid ""
"Click on <guibutton>Next</guibutton> if you are sure and want to erase every "
"partition, every operating system and all data on that hard disk."
msgstr ""

#. type: Content of: <section><info><title>
#: en/testing.xml:9
msgid "Testing Mageia as Live system"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/testing.xml:14
msgid "Live mode"
msgstr "Élő mód"

#. type: Content of: <section><section><mediaobject>
#: en/testing.xml:18
msgid "<imageobject> <imagedata fileref=\"live-liveMode.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"live-liveMode.png\"/> </imageobject>"

#. type: Content of: <section><section><para>
#: en/testing.xml:23
msgid ""
"You get this screen if you selected \"Boot Mageia\". If not, you get the "
"\"<link linkend=\"doPartitionDisks\">Partitioning</link> step\""
msgstr ""

#. type: Content of: <section><section><section><info><title>
#: en/testing.xml:28
msgid "Testing hardware"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/testing.xml:31
msgid ""
"One of the Live mode goals is to test if the hardware is correctly managed "
"by Mageia. You can check if all devices have a driver in the Hardware "
"section of the Mageia Control Center. You can test the most current devices:"
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/testing.xml:38
msgid "network interface: configure it with net_applet"
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/testing.xml:42
msgid "graphical card: if you see the previous screen, it's already OK."
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/testing.xml:47
msgid "webcam:"
msgstr "webkamera:"

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/testing.xml:51
msgid "sound: a jingle has already been played"
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/testing.xml:55
msgid "printer: configure it and print a test page"
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/testing.xml:59
msgid "scanner: scan a document from ..."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/testing.xml:63
msgid ""
"If all is OK for you, you can process to the installation. If not, you can "
"leave with the quit button."
msgstr ""

#. type: Content of: <section><section><section><remark>
#: en/testing.xml:66
msgid "The configuration settings you made here are kept for the installation."
msgstr ""

#. type: Content of: <section><section><section><info><title>
#: en/testing.xml:72
msgid "Launch installation"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/testing.xml:76
msgid ""
"<imageobject> <imagedata fileref=\"live-liveMode-install.png\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"live-liveMode-install.png\"/> </"
"imageobject>"

#. type: Content of: <section><section><section><para>
#: en/testing.xml:81
msgid ""
"To launch the installation of Mageia LiveCD or Live DVD to the hard disc or "
"SSD drive, simply click on the icon \"Install on Hard Disk\". You will get "
"this screen, and then the \"<link linkend=\"doPartitionDisks\">Partitioning</"
"link> step\" as for the direct installation."
msgstr ""

#. type: Content of: <section><info><title>
#: en/uninstall-Mageia.xml:3
msgid "Uninstalling Mageia"
msgstr "Mageia eltávolítás"

#. type: Content of: <section><section><title>
#: en/uninstall-Mageia.xml:10
msgid "Howto"
msgstr "Hogyan"

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:12
msgid ""
"If Mageia didn't convince you or you can't install it correctly, in short "
"you want get rid of it. That is your right and Mageia also gives you the "
"possibility to uninstall. This is not true for every operating system."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:17
msgid ""
"After your data backup, reboot your installation Mageia DVD and select "
"Rescue system, then, Restore Windows boot loader. At the next boot, you will "
"only have Windows with no option to choose your operating system."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:22
msgid ""
"To recover the space used by Mageia partitions on Windows, click on "
"<code>Start -> Control Panel -> Administrative Tools -> Computer Management -"
"> Storage -> Disk Management</code> to access to the partition management. "
"You will recognize the Mageia partition because they are labeled "
"<guilabel>Unknown</guilabel>, and also by their size and place in the disk. "
"Right click on each of these partitions and select <guibutton>Delete</"
"guibutton>. The space will be freed."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:30
msgid ""
"If you are using Windows XP, you can create a new partition and format it "
"(FAT32 or NTFS). It will get a partition letter."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:33
msgid ""
"If you have Vista or 7, you have one more possibility, you can extend the "
"existing partition that is at the left of the freed space.  There are other "
"partitioning tools that can be used, such as gparted, available for both "
"windows and linux. As always, when changing partitions, be very careful, and "
"make sure all important things have been backed up."
msgstr ""

#. type: Content of: <section><info><title>
#: en/unused.xml:9
msgid "Keep or delete unused material"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/unused.xml:13
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format="
"\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format="
"\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/unused.xml:19
msgid ""
"In this step, the installer looks for unused locales packages and unused "
"hardware packages. Then it proposes you to delete them. It is a good idea to "
"accept, except if you prepare an installation which has to run on different "
"hardware."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/unused.xml:25
msgid ""
"<imageobject> <imagedata fileref=\"../live-unused-InstallationProgress.png\"/"
"> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"../live-unused-InstallationProgress.png\"/"
"> </imageobject>"

#. type: Content of: <section><para>
#: en/unused.xml:30
msgid ""
"The next step is the copying of files on hard disk. This takes some minutes. "
"At the end, you get a blank screen for some time, it's normal."
msgstr ""