# SOME DESCRIPTIVE TITLE
# Copyright (C) YEAR Mageia
# This file is distributed under the same license as the Mageia Installer Help package.
# 
# Translators:
# Ivica  Kolić <ikoli@yahoo.com>, 2014-2015
# Romero, 2015
msgid ""
msgstr ""
"Project-Id-Version: Mageia\n"
"Report-Msgid-Bugs-To: doc-discuss@ml.mageia.org\n"
"POT-Creation-Date: 2015-02-24 19:21+0200\n"
"PO-Revision-Date: 2015-04-02 16:24+0000\n"
"Last-Translator: Ivica  Kolić <ikoli@yahoo.com>\n"
"Language-Team: Croatian (http://www.transifex.com/projects/p/mageia/language/hr/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: hr\n"
"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"

#. type: Content of: <section><info><title>
#: en/acceptLicense.xml:32
msgid "License and Release Notes"
msgstr "Licenca i bilješka o izdanju"

#. type: Content of: <section><mediaobject>
#: en/acceptLicense.xml:36
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-license.png\" "
"format=\"PNG\" revision=\"1\" xml:id=\"acceptLicense-im1\"/> </imageobject>"
msgstr "<imageobject> <imagedata align=\"center\" fileref=\"dx2-license.png\" format=\"PNG\" revision=\"1\" xml:id=\"acceptLicense-im1\"/> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/acceptLicense.xml:45
msgid "License Agreement"
msgstr "Ugovor o licenci"

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:48
msgid ""
"Before installing <application>Mageia</application>, please read the license"
" terms and conditions carefully."
msgstr "Prijew instalacije <application>Mageie</application>, molim pročitajte pažljivo uvjete licence."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:51
msgid ""
"These terms and conditions apply to the entire "
"<application>Mageia</application> distribution and must be accepted before "
"you can continue."
msgstr "Ovi se uvjeti primjenjuju na cijelu <application>Mageia</application> distribuciju i moraju biti prihvaćeni prije nego što nastavite."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:55
msgid ""
"To accept, simply select <guilabel>Accept</guilabel> and then click on "
"<guibutton>Next</guibutton>."
msgstr "Za prihvaćanje jednostavno odaberite <guilabel>Prihvaćam</guilabel> i zatim kliknite na <guibutton>Slijedeće</guibutton>."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:58
msgid ""
"If you decide not to accept these conditions, then we thank you for looking."
" Clicking <guibutton>Quit</guibutton> will reboot your computer."
msgstr "Ako odlučite ne prihvatiti ove uvjete, zahvaljujemo vam pto ste pogledali. Klikom na  <guibutton>Isključi</guibutton> ponovno ćete pokrenuti vaše računalo."

#. type: Content of: <section><section><info><title>
#: en/acceptLicense.xml:68
msgid "Release Notes"
msgstr "Bilješke o izdanju"

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:75
msgid ""
"To see what's new in this release of <application>Mageia</application>, "
"click on the <guibutton>Release Notes</guibutton> button."
msgstr "Da biste vidjeli što je novo u <application>Mageii</application>, kliknite na <guibutton>Bilješka o izdanju</guibutton> dugme."

#. type: Attribute 'xml:lang' of: <section>
#: en/add_supplemental_media.xml:2 en/DrakX-cover.xml:2 en/DrakX.xml:1
#: en/media_selection.xml:1
msgid "en"
msgstr "hr"

#. type: Content of: <section><info><title>
#: en/add_supplemental_media.xml:10
msgid "Media Selection (Configure Supplemental Installation Media)"
msgstr "Odabir Medija (Konfiguracija dopunskog instalacijskog medija)"

#.  papoteur 2013-04-13  - created
#.  marja 2013-04-16 added screenshot and expanded title (because is was the
#. same as for media_selection
#.  marja 2013-04-16 s/a optical/an optcal/ s/support/disc/ s/or or/or/
#. s/at/during/ as suggested by Tristan Campbell
#. type: Content of: <section><mediaobject>
#: en/add_supplemental_media.xml:18
msgid ""
"<imageobject> <imagedata align=\"center\" "
"fileref=\"dx2-add_supplemental_media.png\" format=\"PNG\" revision=\"1\" "
"xml:id=\"dx2-add_supplemental_media-im1\"/> </imageobject>"
msgstr "<imageobject> <imagedata align=\"center\" fileref=\"dx2-add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-add_supplemental_media-im1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/add_supplemental_media.xml:24
msgid ""
"This screen gives you the list of already recognized repositories. You can "
"add other sources for packages, like an optical disc or a remote source. The"
" source selection determines which packages will be available for selection "
"during the next steps."
msgstr "Ovaj zaslon daje vam listu već prepoznatih repozitorija. MOžewte dodati ostale izvore za pakete, poput optičkoga diska ili udaljenog izvora. Odabir izvora određuje koji paketi će biti dostupni za odabir tijekom idućih koraka."

#. type: Content of: <section><para>
#: en/add_supplemental_media.xml:29
msgid "For a network source, there are two steps to follow:"
msgstr "Za mrežni izvor, postoje dva koraka koja trba slijediti:"

#. type: Content of: <section><orderedlist><listitem><para>
#: en/add_supplemental_media.xml:33
msgid "Choosing and activation of the network, if not already up."
msgstr "Odabir aktivacije mreže, ako već nije aktivna."

#. type: Content of: <section><orderedlist><listitem><para>
#: en/add_supplemental_media.xml:37
msgid ""
"Selecting a mirror or specifying a URL (very first entry). By selecting a "
"mirror, you have access to the selection of all repositories managed by "
"Mageia, like the Nonfree , the Tainted repositories and the Updates. With "
"the URL, you can designate a specific repository or your own NFS "
"installation."
msgstr "Odabir ogledala ili određenog URL (prvi unos). Odabirom ogledala imate pristup odabiru svih repozitorija uprave Mageia, poput Nonfree, sa Tainted spremištem i ažuriranjem. Sa URL možete odrediti određeni repozitorij ili vlastitu NFS instalaciju."

#. type: Content of: <section><info><title>
#: en/addUser.xml:4
msgid "User and Superuser Management"
msgstr "Upravljanje korisnikom i superkorisnikom"

#.  Started by marja,using Led43's text, on 2012 03 27
#.  NEEDS TO BE REVIEWED!
#.  SimonNZG 2012-04-03 has taken a look but needs to come back
#.  removed para xml:id's, finished the page using Led43's text in the wiki,
#. but
#.        changed his text about the Advanced User Managment screen (the only
#. thing
#.        about guest account there, is the box you can tick or untick to
#. enable or
#.        disable it, the rest is about the normal user you're adding in the
#. previous
#.        screen), marja, 20120409
#.  barjac 2012-04-13 moved explanation of xguest lower down. I don't
#. understand
#.        "rbash" in the xguest warning - is that correct?
#.  JohnR 2012-04-19 Language proofreading
#.  marja 2012-04-24 Added screenshot
#.  marja 2013-04-26 added new note
#. type: Content of: <section><mediaobject>
#: en/addUser.xml:27
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setRootPassword.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"setRootPassword-im1\"></imagedata> "
"</imageobject>"
msgstr "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setRootPassword.png\" format=\"PNG\" align=\"center\" xml:id=\"setRootPassword-im1\"></imagedata> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:34
msgid "Set Administrator (root)  Password:"
msgstr "Poostavi administratorsku (root) lozinku:"

#. type: Content of: <section><section><para>
#: en/addUser.xml:38
msgid ""
"It is advisable for all <application>Mageia</application> installations to "
"set a superuser or administrator's password, usually called the "
"<emphasis>root password</emphasis> in Linux. As you type a password into the"
" top box the colour of its shield will change from red to yellow to green "
"depending on the strength of the password. A green shield shows you are "
"using a strong password. You need to repeat the same password in the box "
"just below the first password box, this checks that you have not mistyped "
"the first password by comparing them."
msgstr "Preporučljivo je za sve <application>Mageia</application> instalacije postavit isuperkorisničku ili administrativnu lozinku, koju obično nazivamo <emphasis>root lozinka</emphasis> u linuxu. dok upisujete lozinku u gornje polje boja štita će se mijenjati od crvene preko žute do zelene ovisno o jačini lozinke. Zeleni štit pokazuje da koristite jaku lozinku. Morate ponoviti lozinku u donjem polju, što provjerava da niste krivo napisali prvu lozinku uspoređujući ih."

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:48
msgid ""
"All passwords are case sensitive, it is best to use a mixture of letters "
"(upper and lower case), numbers and other characters in a password."
msgstr "Sve su lozinke osjetljive n avelika i mala slova, pa je najbolje koristiti mješavinu slova (velikih i malih), brojeva i ostalih znakova u lozinki."

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:56
msgid "Enter a user"
msgstr "Unesite korisnika"

#. type: Content of: <section><section><para>
#: en/addUser.xml:59
msgid ""
"Add a user here. A user has fewer rights than the superuser (root), but "
"enough to surf the internet, use office applications or play games and "
"anything else the average user does with his computer"
msgstr "Dodajte korisnika ovdje. korisnik ima manje ovlasti od superkorisnika (root), ali dovoljno da koristi internet,uredske programe ili igra igre i sve ostalo što prosječan korisnik radi sa svojim računalom."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:65
msgid ""
"<guibutton>Icon</guibutton>: if you click on this button it will change the "
"users icon."
msgstr "<guibutton>Ikona</guibutton>: ako kliknete na ovo dugme promjeniti će ikonu korisnika."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:70
msgid ""
"<guilabel>Real Name</guilabel>: Insert the users real name into this text "
"box."
msgstr "<guilabel>Pravo ime</guilabel>: Umetni korisničko pravo ime u ovo tekstualno polje."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:75
msgid ""
"<guilabel>Login Name</guilabel>: Here you enter the user login name or let "
"drakx use a version of the users real name. <emphasis>The login name is case"
" sensitive.</emphasis>"
msgstr "<guilabel>Ime prijave</guilabel>: Ovdje unesite korisnikovo ie prijave ili dopustite da drakx koristi verziju korisničkih pravih imena. <emphasis>Ime prijave je osjetljivo na mala i velika slova.</emphasis>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:81
msgid ""
"<guilabel>Password</guilabel>: In this text box you should type in the user "
"password. There is a shield at the end of the text box that indicates the "
"strength of the password. (See also <xref linkend=\"givePassword\"></xref>)"
msgstr "<guilabel>Lozinka</guilabel>: U tekstualno polje trebate uppisati korisničku lozinku. Na kraju tekstualnog polja nalazi se štit koji pokazuje snagu lozinke.(Također vidi <xref linkend=\"givePassword\"></xref>)"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:87
msgid ""
"<guilabel>Password (again)</guilabel>: Retype the user password into this "
"text box and drakx will check you have the same password in each of the user"
" password text boxes."
msgstr "<guilabel>Lozinka (ponovno)</guilabel>: Ponovno upišite korisničku lozinku u ovo tekstualno polje i drakx će provjeriti imate li istu lozinku u svakom tekstualnom polju."

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:94
msgid ""
"Any user you add while installing Mageia, will have a world readable (but "
"write protected) home directory."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:97
msgid ""
"However, while using your new install, any user you add in <emphasis>MCC - "
"System - Manage users on system</emphasis> will have a home directory that "
"is both read and write protected."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:101
msgid ""
"If you don't want a world readable home directory for anyone, it is advised "
"to only add a temporary user now and to add the real one(s) after reboot."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:105
msgid ""
"If you prefer world readable home directories, you might want to add all "
"extra needed users in the <emphasis>Configuration - Summary</emphasis> step "
"during the install. Choose <emphasis>User management</emphasis>."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:109
msgid "The access permissions can also be changed after the install."
msgstr "Dozvole pristupa također se mogu promjeniti nakon instlacije."

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:116
msgid "Advanced User Management"
msgstr "Napredno korisničko upravljanje"

#. type: Content of: <section><section><para>
#: en/addUser.xml:119
msgid ""
"If the <guibutton>advanced</guibutton> button is clicked you are offered a "
"screen that allows you to edit the settings for the user you are adding. "
"Additionally, you can disable or enable a guest account."
msgstr "Ako je  kliknuto na <guibutton>napredno</guibutton> dugme nudi vam se zaslon gdje možete urediti postavke korisnika kojega dodajete. Dodatno, možete onemogućiti ili omogućiti račun gosta."

#. type: Content of: <section><section><warning><para>
#: en/addUser.xml:124
msgid ""
"Anything a guest with a default <emphasis>rbash</emphasis> guest account "
"saves to his /home directory will be erased when he logs out.  The guest "
"should save his important files to a USB key."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:131
msgid ""
"<guilabel>Enable guest account</guilabel>: Here you can enable or disable a "
"guest account. The guest account allows a guest to log into and use the PC, "
"but he has more restricted access than normal users."
msgstr "<guilabel>Omogući račun gosta</guilabel>: Ovdje možete omogućiti ili onemogućiti račun gosta. Račun gosta dopušta gostu prijavu i korištenje PC-ja, ali ima ograničeniji pristup od normalnih korisnika."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:138
msgid ""
"<guilabel>Shell</guilabel>: This drop down list allows you to change the "
"shell used by the user you are adding in the previous screen, options are "
"Bash, Dash and Sh"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:144
msgid ""
"<guilabel>User ID</guilabel>: Here you can set the user ID for the user you "
"are adding in the previous screen. This is a number.  Leave it blank unless "
"you know what you are doing."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:150
msgid ""
"<guilabel>Group ID</guilabel>: This lets you set the group ID.  Also a "
"number, usually the same one as for the user. Leave it blank unless you know"
" what you are doing."
msgstr ""

#. type: Content of: <section><info><title>
#: en/ask_mntpoint_s.xml:11
msgid "Choose the mount points"
msgstr "Odaberite mjesta montiranja"

#.  Made by marja on 2012 03 28
#.  NEEDS TO BE REVIEWED!
#.  SimonNZG 2012-04-03 has taken a look but needs to come back
#.  removed para xml:id's, marja, 20120409
#.  barjac 14/04/2012 Minor edit to improve grammar and replaced "at least
#. ONE"
#.        with "a", as I can't imagine having more than one root partition ;)
#.  Lebarhon : I put [] where it seems having mistakes
#.  Marja: you're right, in English English it is "its type", however, the
#. Americans
#.        write "it's type". And you're right about the redundant part, too, I
#. removed it
#.  And JohnR says the Americans are WRONG! :-))
#.  2012-04-19  Language proofreading done
#. type: Content of: <section><mediaobject>
#: en/ask_mntpoint_s.xml:27
msgid ""
"<imageobject> <imagedata revision=\"1\" "
"fileref=\"dx2-chooseMountpoints.png\" align=\"center\" format=\"PNG\" xml:id"
"=\"chooseMountPoints-im1\"></imagedata> </imageobject>"
msgstr "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-chooseMountpoints.png\" align=\"center\" format=\"PNG\" xml:id=\"chooseMountPoints-im1\"></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/ask_mntpoint_s.xml:33
msgid ""
"Here you see the Linux partitions that have been found on your computer. If "
"you don't agree with the <application>DrakX</application> suggestions, you "
"can change the mount points."
msgstr "Ovdje možete vidjeti linux particije kje su nađene na vašem računalu. Ako se ne slažete sa <application>DrakX</application> sugerstijama, možete promjeniti točke montiranja."

#. type: Content of: <section><note><para>
#: en/ask_mntpoint_s.xml:38
msgid ""
"If you change anything, make sure you still have a <literal>/</literal> "
"(root) partition."
msgstr "Ako išta promjenite, budite sigurni da još uvijek imate <literal>/</literal> (root) particiju."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:44
msgid ""
"Every partition is shown as follows: \"Device\" (\"Capacity\", \"Mount "
"point\", \"Type\")."
msgstr "Svaka particija je prikazana kao što slijedi:\n\"Uređaj\" (\"Kapacitet\", \"Točka montiranja\", \"Vrsta\")."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:49
msgid ""
"\"Device\", is made up of: \"hard drive\", [\"hard drive number\"(letter)], "
"\"partition number\" (for example, \"sda5\")."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:55
msgid ""
"If you have many partitions, you can choose many different mount points from"
" the drop down menu, such as <literal>/</literal>, <literal>/home</literal> "
"and <literal>/var</literal>. You can even make your own mount points, for "
"instance <literal>/video</literal> for a partition where you want to store "
"your films, or <literal>/cauldron-home</literal> for the "
"<literal>/home</literal> partition of a cauldron install."
msgstr "Ako imate puno particija, možete izabrati mnogo različitih točaka montiranja iz padajućeg izbornika, kao što su  <literal>/</literal>, <literal>/home</literal> and <literal>/var</literal>. Možete čak napraviti vlastite točke montiranja, na primjer <literal>/video</literal> za particiju gdje želite pohraniti filmove, ili <literal>/cauldron-home</literal> za<literal>/home</literal> particiju cauldron instalacije."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:65
msgid ""
"For partitions you don't need to have access to, you can leave the mount "
"point field blank."
msgstr "Za particije kojima nemate pristup, možete ostaviti prazno polje točke montiranja."

#. type: Content of: <section><warning><para>
#: en/ask_mntpoint_s.xml:71
msgid ""
"Choose <guibutton>Previous</guibutton> if you are not sure what to choose, "
"and then tick <guilabel>Custom disk partitioning</guilabel>. In the screen "
"that follows, you can click on a partition to see its type and size."
msgstr "Izaberite  <guibutton>Prethodno</guibutton> ako niste sigurni što odabrati, i zatim označite <guilabel>Prilagođeno particioniranje diska</guilabel>. Na zalonu koji će uslijediti, kliknite na particiju da vidite vrstu i veličinu."

#. type: Content of: <section><para>
#: en/ask_mntpoint_s.xml:77
msgid ""
"If you are sure the mount points are correct, click on "
"<guibutton>Next</guibutton>, and choose whether you only want to format the "
"partition(s) DrakX suggests, or more."
msgstr "Ako ste sigurni da su točke montiranja ispravne, kliknite na <guibutton>Slijedeće</guibutton>, i izaberite želite li formatirati samo particiju(e) koje sugerira DrakX, ili više."

#. type: Content of: <section><info><title>
#: en/chooseDesktop.xml:5
msgid "Desktop Selection"
msgstr "Odabir radnog okruženja"

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:11
msgid ""
"Depending on your selection here, you may be offered further screens to fine"
" tune your choice."
msgstr "Ovisno o vašem odabiru, možda vam budu ponuđeni daljnji zasloni za fino ugađanje vašega izbora."

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:13
msgid ""
"After the selection step(s), you will see a slide show during package "
"installation. The slide show can be disabled by pressing the "
"<guilabel>Details</guilabel> button"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/chooseDesktop.xml:20
msgid ""
"<imageobject> <imagedata fileref=\"dx2-chooseDesktop.png\" align=\"center\" "
"format=\"PNG\" ></imagedata> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"dx2-chooseDesktop.png\" align=\"center\" format=\"PNG\" ></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:26
msgid ""
"Choose whether you prefer to use the <application>KDE</application> or "
"<application>Gnome</application> desktop environment. Both come with a full "
"set of useful applications and tools. Tick <guilabel>Custom</guilabel> if "
"you want to use neither or both, or if you want something other than the "
"default software choices for these desktop environments. The "
"<application>LXDE</application> desktop is lighter than the previous two, "
"sporting less eye candy and fewer packages installed by default."
msgstr ""

#. type: Content of: <section><info><title>
#: en/choosePackageGroups.xml:4
msgid "Package Group Selection"
msgstr "Odabir grupe paketa"

#. 2012-12-26 marja - exported this section from choosePackages.xml to start a
#. new page
#. type: Content of: <section><mediaobject>
#: en/choosePackageGroups.xml:10
msgid ""
"<imageobject> <imagedata fileref=\"dx2-choosePackageGroups.png\" "
"align=\"center\" format=\"PNG\" ></imagedata> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"dx2-choosePackageGroups.png\" align=\"center\" format=\"PNG\" ></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/choosePackageGroups.xml:16
msgid ""
"Packages have been sorted into groups, to make choosing what you need on "
"your system a lot easier. The groups are fairly self explanatory, however "
"more information about the content of each is available in tool-tips which "
"become visible as the mouse is hovered over them."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:23
msgid "Workstation."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:27
msgid "Server."
msgstr "Poslužitelj"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:31
msgid "Graphical Environment."
msgstr "Grafičko okruženje"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:35
msgid ""
"Individual Package Selection: You can use this option to manually add or "
"remove packages."
msgstr "Odabir pojedinačnih paketa: Možete koristiti ovu opciju za ručno dodavanje ili uklanajnje paketa."

#. type: Content of: <section><para>
#: en/choosePackageGroups.xml:39
msgid ""
"Read <xref linkend=\"minimal-install\"></xref> for instructions on how to do"
" a minimal install."
msgstr "Pročitaj  <xref linkend=\"minimal-install\"></xref> za instrukcije kako napraviti minimalnu instalaciju."

#. type: Content of: <section><info><title>
#: en/choosePackagesTree.xml:4
msgid "Choose Individual Packages"
msgstr "Izaberi pojedinačne pakete"

#. 2012-12-26 marja - exported this section from choosePackages.xml to start a
#. new page
#. type: Content of: <section><mediaobject>
#: en/choosePackagesTree.xml:11
msgid ""
"<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" "
"align=\"center\" format=\"PNG\" ></imagedata> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" align=\"center\" format=\"PNG\" ></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/choosePackagesTree.xml:17
msgid ""
"Here you can add or remove any extra packages to customise your "
"installation."
msgstr "Ovdje možete dodati ili ukloniti dodatne pakete za prilagodbu vaše instalacije."

#. type: Content of: <section><para>
#: en/choosePackagesTree.xml:20
msgid ""
"After having made your choice, you can click on the <guibutton>floppy "
"icon</guibutton> at the bottom of the page to save your choice of packages "
"(saving to a USB key works, too). You can then use this file to install the "
"same packages on another system, by pressing the same button during install "
"and choosing to load it."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureServices.xml:12
msgid "Configure your Services"
msgstr "Konfigurirajte vaše servise"

#.  2012-12-25 marja - moved this section out of misc-params.xml
#.  2013-05-05 marja - added screenshot
#. type: Content of: <section><mediaobject>
#: en/configureServices.xml:21
msgid ""
"<imageobject> <imagedata revision=\"1\" "
"fileref=\"dx2-configureServices.png\" align=\"center\" format=\"PNG\" xml:id"
"=\"configureServices-im1\"></imagedata> </imageobject>"
msgstr "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices.png\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/configureServices.xml:27
msgid ""
"Here you can set which services should (not) start when you boot your "
"system."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:30
msgid ""
"There are four groups, click on the triangle before a group to expand it and"
" see all services in it."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:34
msgid "The setting DrakX chose are usually good."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:37
msgid ""
"If you highlight a service, some information about it is shown in the info "
"box below."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:41
msgid "Only change things when you know very well what you are doing."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureTimezoneUTC.xml:12
msgid "Configure your Timezone"
msgstr "Konfigurirajte vremensku zonu"

#.  2012-12-25 marja - moved this part out of misc-params.xml
#.  2013-05-05 marja - added screenshot
#. type: Content of: <section><mediaobject>
#: en/configureTimezoneUTC.xml:20
msgid ""
"<imageobject> <imagedata revision=\"1\" "
"fileref=\"dx2-configureTimezoneUTC.png\" align=\"center\" format=\"PNG\" "
"xml:id=\"configureTimezoneUTC-im1\"></imagedata> </imageobject>"
msgstr "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureTimezoneUTC.png\" align=\"center\" format=\"PNG\" xml:id=\"configureTimezoneUTC-im1\"></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/configureTimezoneUTC.xml:26
msgid ""
"Choose your time zone by choosing your country or a city close to you in the"
" same time zone."
msgstr "Odaberite vašu vremensku zonu birajući vašu državu ili grad blizu vas u istoj vremenskoj zoni."

#. type: Content of: <section><para>
#: en/configureTimezoneUTC.xml:30
msgid ""
"In next screen you can choose to set your hardware clock to local time or to"
" GMT, also known as UTC."
msgstr "Na slijedećem zaslonu moći ćete postaviti sat vašega sklopovlja na lokalno vrijeme ili na GMT, također poznat kao UTC."

#. type: Content of: <section><note><para>
#: en/configureTimezoneUTC.xml:35
msgid ""
"If you have more than one operating system on your computer, make sure they "
"are all set to local time, or all to UTC/GMT."
msgstr "Ako imate više operativinih sustava na vašem računalu, budite sigurni da su svi postavljeni na lokalno vrijeme ili na "

#. type: Content of: <section><info><title>
#: en/configureX_card_list.xml:11
msgid "Choose an X Server (Configure your Graphic Card)"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/configureX_card_list.xml:16
msgid ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id"
"=\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" "
"format=\"PNG\"/> </imageobject>"
msgstr "<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id=\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" format=\"PNG\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:21
msgid ""
"DrakX has a very comprehensive database of video cards and will usually "
"correctly identify your video device."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:24
msgid ""
"If the installer has not correctly detected your graphic card and you know "
"which one you have, you can select it from the tree by:"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:27 en/configureX_monitor.xml:69
msgid "vendor"
msgstr "proizvođač"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:31
msgid "then the name of your card"
msgstr "ime vaše kartice"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:35
msgid "and the type of card"
msgstr "vrsta kartice"

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:39
msgid ""
"If you cannot find your card in the vendor lists (because it's not yet in "
"the database or it's an older card) you may find a suitable driver in the "
"Xorg category"
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:43
msgid ""
"The Xorg listing provides more than 40 generic and open source video card "
"drivers. If you still can't find a named driver for your card there is the "
"option of using the vesa driver which provides basic capabilities."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:48
msgid ""
"Be aware that if you select an incompatible driver you may only have access "
"to the Commandline Interface."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:51
msgid ""
"Some video card manufacturers provide proprietary drivers for Linux which "
"may only be available in the Nonfree repository and in some cases only from "
"the card manufacturers' websites."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:55
msgid ""
"The Nonfree repository needs to be explicitly enabled to access them.  If "
"you didn't select it previously, you should do this after your first reboot."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureX_chooser.xml:4
msgid "Graphic Card and Monitor Configuration"
msgstr ""

#.  Marja 2012-08-10, copied setupX.xml to this file and replaced all "setupX"
#. in the code by "configureX_chooser", because this is the correct filename
#. for this page
#. type: Content of: <section><mediaobject>
#: en/configureX_chooser.xml:11
msgid ""
"<imageobject> <imagedata revision=\"1\" "
"fileref=\"dx2-configureX_chooser.png\" align=\"center\" format=\"PNG\" "
"xml:id=\"configureX_chooser-im1\"> </imagedata> </imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_chooser.xml:18
msgid ""
"No matter which graphical environment (also known as desktop environment) "
"you chose for this install of <application>Mageia</application>, they are "
"all based on a graphical user interface system called <acronym>X Window "
"System</acronym>, or simply <acronym>X</acronym>. So in order for "
"<acronym>KDE</acronym>, <acronym>Gnome</acronym>, <acronym>LXDE</acronym> or"
" any other graphical environment to work well, the following "
"<acronym>X</acronym> settings need to be correct. Choose the correct "
"settings if you can see that <application>DrakX</application> didn't make a "
"choice, or if you think the choice is incorrect."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:31
msgid ""
"<emphasis><guibutton>Graphic card</guibutton></emphasis>: Choose your card "
"from the list if needed."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:37
msgid ""
"<emphasis><guibutton>Monitor</guibutton></emphasis>: You can choose "
"<guilabel>Plug'n Play</guilabel> when applicable, or choose your monitor "
"from the <guilabel>Vendor</guilabel> or <guilabel>Generic</guilabel> list. "
"Choose <guilabel>Custom</guilabel> if you prefer to manually set the "
"horizontal and vertical refresh rates of your monitor."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><warning><para>
#: en/configureX_chooser.xml:45
msgid "Incorrect refresh rates may damage your monitor"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:51
msgid ""
"<emphasis><guibutton>Resolution</guibutton></emphasis>: Set the desired "
"resolution and color depth of your monitor here."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:56
msgid ""
"<emphasis><guibutton>Test</guibutton></emphasis>: The test button does not "
"always appear during install. If the button is there, you can control your "
"settings by pressing it. If you see a question asking you whether your "
"settings are correct, you can answer \"yes\", and the settings will be kept."
" If you don't see anything, you'll return to the configuration screen and be"
" able to reconfigure everything until the test is good. <emphasis>Make sure "
"your settings are on the safe side if the test button isn't "
"available</emphasis>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:67
msgid ""
"<emphasis><guibutton>Options</guibutton></emphasis>: Here you can choose to "
"enable or disable various options."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureX_monitor.xml:18
msgid "Choosing your Monitor"
msgstr "Izaberite vaš monitor"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:21
msgid ""
"DrakX has a very comprehensive database of monitors and will usually "
"correctly identify yours."
msgstr "DrakX  ima vrlo opsežnu bazu podataka monitora i obično će točno identificirati vaš."

#. type: Content of: <section><warning><para>
#: en/configureX_monitor.xml:26
msgid ""
"<emphasis>Selecting a monitor with different characteristics could damage "
"your monitor or video hardware. Please don't try something without knowing "
"what you are doing.</emphasis> If in doubt you should consult your monitor "
"documentation"
msgstr "<emphasis>Odabirom monitora drugih karakteristika možete oštetiti vaš monitor i video sklopovlje. Molim ne pokušavajte tako nešto ukoliko ne znate što radite.</emphasis> Ako imate sumnji savjetujte se sa dokumentacijom svoga monitora"

#. type: Content of: <section><mediaobject>
#: en/configureX_monitor.xml:34
msgid ""
"<imageobject> <imagedata align=\"center\" "
"fileref=\"dx2-configureX_monitor.png\" format=\"PNG\" revision=\"1\" xml:id"
"=\"configureX_monitor-im1\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:42
msgid "<emphasis>Custom</emphasis>"
msgstr "<emphasis>Prilagođeno</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:44
msgid ""
"This option allows you to set two critical parameters, the vertical refresh "
"rate and the horizontal sync rate. Vertical refresh determines how often the"
" screen is refreshed and horizontal sync is the rate at which scan lines are"
" displayed."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:49
msgid ""
"It is <emphasis>VERY IMPORTANT</emphasis> that you do not specify a monitor "
"type with a sync range that is beyond the capabilities of your monitor: you "
"may damage your monitor. If in doubt, choose a conservative setting and "
"consult your monitor documentation."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:55
msgid "<emphasis>Plug 'n Play</emphasis>"
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:58
msgid ""
"This is the default option and tries to determine the monitor type from the "
"monitor database."
msgstr "Ovo je zadana opcija i pokušava odrediti vrstu monitora iz baze podataka monitora."

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:63
msgid "<emphasis>Vendor</emphasis>"
msgstr "<emphasis>Proizvođač</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:65
msgid ""
"If the installer has not correctly detected your monitor and you know which "
"one you have, you can select it from the tree by selecting:"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_monitor.xml:73
msgid "the monitor manufacturers name"
msgstr "ime proizvođača monitora"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_monitor.xml:77
msgid "the monitor description"
msgstr "opis monitora"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:82
msgid "<emphasis>Generic</emphasis>"
msgstr "<emphasis>Generički</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:84
msgid ""
"selecting this group displays nearly 30 display configurations such as "
"1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is"
" often a good monitor selection group if you need to use the Vesa card "
"driver when your video hardware cannot be determined automatically. Once "
"again it may be wise to be conservative in your selections."
msgstr ""

#. type: Content of: <section><info><title>
#: en/diskdrake.xml:19
msgid "Custom disk partitioning with DiskDrake"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/diskdrake.xml:26
msgid ""
"<imageobject> <imagedata fileref=\"dx2-diskdrake.png\" "
"align=\"center\"></imagedata> </imageobject>"
msgstr ""

#. type: Content of: <section><warning><para>
#: en/diskdrake.xml:33
msgid ""
"If you wish to use encryption on your <literal>/</literal> partition you "
"must ensure that you have a separate <literal>/boot</literal> partition. The"
" encryption option for the <literal>/boot</literal> partition must NOT be "
"set, otherwise your system will be unbootable."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:39
msgid ""
"Adjust the layout of your disk(s) here. You can remove or create partitions,"
" change the filesystem of a partition or change its size and even view what "
"is in them before you start."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:42
msgid ""
"There is a tab for every detected hard disk or other storage device, like an"
" USB key. For example sda, sdb and sdc if there are three of them."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:45
msgid ""
"Push <guibutton>Clear all</guibutton> to wipe all partitions on the selected"
" storage device"
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:47
msgid ""
"For all other actions: click on the desired partition first. Then view it, "
"or choose a filesystem and a mount point, resize it or wipe it."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:49
msgid "Continue until you adjusted everything to your wishes."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:51
msgid "Click <guibutton>Done</guibutton> when you're ready."
msgstr ""

#. type: Content of: <section><info><title>
#: en/doPartitionDisks.xml:25
msgid "Partitioning"
msgstr "Particioniranje"

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:28
msgid ""
"In this screen you can see the content of your hard drive(s) and see the "
"solutions the DrakX partitioning wizard found for where to install "
"<application>Mageia</application>."
msgstr ""

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:33
msgid ""
"The options available from the list below will vary depending on your "
"particular hard drive(s) layout and content."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/doPartitionDisks.xml:38
msgid ""
"<imageobject> <imagedata align=\"center\" "
"fileref=\"dx2-doPartitionDisks.png\" /> </imageobject>"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:45
msgid "Use Existing Partitions"
msgstr "Koristi postojeće particije"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:48
msgid ""
"If this option is available, then existing Linux compatible partitions have "
"been found and may be used for the installation."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:54
msgid "Use Free Space"
msgstr "Koristi slobodni prostor"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:56
msgid ""
"If you have unused space on your hard drive then this option will use it for"
" your new Mageia installation."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:62
msgid "Use Free Space on a Windows Partition"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:65
msgid ""
"If you have unused space on an existing Windows partition, the installer may"
" offer to use it."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:69
msgid ""
"This can be a useful way of making room for your new Mageia installation, "
"but is a risky operation so you should make sure you have backed up all "
"important files!"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:74
msgid ""
"Note that this involves shrinking the size of the Windows partition. The "
"partition must be \"clean\", meaning that Windows must have closed down "
"correctly the last time it was used. It must also have been defragmented, "
"although this is not a guarantee that all files in the partition have been "
"moved out of the area that is about to be used. It is highly recommended to "
"back up your personal files."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:84
msgid "Erase and use Entire Disk."
msgstr "Izbriši i koristi cijeli disk."

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:87
msgid "This option will use the complete drive for Mageia."
msgstr "Ova će opcija koristiti cijeli pogon za Mageiu."

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:90
msgid "Note! This will erase ALL data on the selected hard drive. Take care!"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:93
msgid ""
"If you intend to use part of the disk for something else, or you already "
"have data on the drive that you are not prepared to lose, then do not use "
"this option."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:100
msgid "Custom"
msgstr "Prilagođeno"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:102
msgid ""
"This gives you complete control over the placing of the installation on your"
" hard drive(s)."
msgstr ""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:109
msgid ""
"Some newer drives are now using 4096 byte logical sectors, instead of the "
"previous standard of 512 byte logical sectors. Due to lack of available "
"hardware, the partitioning tool used in the installer has not been tested "
"with such a drive. Also some ssd drives now use an erase block size over 1 "
"MB. We suggest to pre-partition the drive, using an alternative partitioning"
" tool like gparted, if you own such a device, and to use the following "
"settings:"
msgstr ""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:117
msgid "\"Align to\" \"MiB\""
msgstr ""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:119
msgid "\"Free space preceding (MiB)\" \"2\""
msgstr ""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:121
msgid ""
"Also make sure all partitions are created with an even number of megabytes."
msgstr ""

#. type: Content of: <article><info><title>
#: en/DrakX-cover.xml:4 en/DrakX-cover.xml:22 en/DrakX.xml:3
msgid "Installation with DrakX"
msgstr "Instalacija pomoću "

#. type: Content of: <book><info><cover><info>
#: en/DrakX-cover.xml:5 en/DrakX-cover.xml:23
msgid "<publisher> <publishername>Mageia.org</publishername> </publisher>"
msgstr "<publisher> <publishername>Mageia.org</publishername> </publisher>"

#. type: Content of: <book><info><cover><info><revhistory><revision><date>
#: en/DrakX-cover.xml:10 en/DrakX-cover.xml:28
msgid "February 2014"
msgstr "Veljača 2014"

#. type: Content of:
#. <book><info><cover><info><revhistory><revision><revremark>
#: en/DrakX-cover.xml:11 en/DrakX-cover.xml:29
msgid "Mageia 4"
msgstr "Mageia 4"

#. type: Content of: <book><info><cover><para>
#: en/DrakX-cover.xml:15
msgid "The Official Documentation for Mageia"
msgstr "Službena dokumentacija za Mageiu"

#. type: Content of: <book><info><cover><mediaobject>
#: en/DrakX-cover.xml:17
msgid "<imageobject> <imagedata fileref=\"mageia-2013.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <article><info><cover><para><note>
#: en/DrakX-cover.xml:42 en/DrakX.xml:6
msgid "<note>"
msgstr ""

#. type: Content of: <article><info><cover><para><note><para>
#: en/DrakX-cover.xml:43 en/DrakX.xml:7
msgid ""
"No one will see all the installer screens that you see in this manual. Which"
" screens you will see, depends on your hardware and the choices you make "
"while installing."
msgstr ""

#. type: Content of: <article><info><cover><para>
#: en/DrakX-cover.xml:46 en/DrakX.xml:10
msgid "</note>"
msgstr ""

#. type: Content of: <article><info><cover><para>
#: en/DrakX-cover.xml:48 en/DrakX.xml:12
msgid ""
"The texts and screenshots in this manual are available under the CC BY-SA "
"3.0 license <link ns6:href=\"http://creativecommons.org/licenses/by-"
"sa/3.0/\">http://creativecommons.org/licenses/by-sa/3.0/</link>."
msgstr ""

#. type: Content of: <article><info><cover><para>
#: en/DrakX-cover.xml:52 en/DrakX.xml:16
msgid ""
"This manual was produced with the help of the <link "
"ns6:href=\"http://www.calenco.com\">Calenco CMS</link> developed by <link "
"ns6:href=\"http://www.neodoc.biz\">NeoDoc</link>."
msgstr ""

#. type: Content of: <article><info><cover><para>
#: en/DrakX-cover.xml:54 en/DrakX.xml:18
msgid ""
"It was written by volunteers in their free time. Please contact <link "
"ns6:href=\"https://wiki.mageia.org/en/Documentation_team\">Documentation "
"Team</link>, if you would like to help improve this manual."
msgstr ""

#. type: Content of: <section><info><title>
#: en/exitInstall.xml:4
msgid "Congratulations"
msgstr "Čestitamo"

#.  Started by marja on 2012 03 29
#.  NEEDS TO BE WRITTEN AND THEN REVIEWED!
#.  marja - 2012-04-24 added screenshot and text
#.  same day, added "s" to "sytems"
#. type: Content of: <section><mediaobject>
#: en/exitInstall.xml:14
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-exitInstall.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"exitInstall-im1\"> </imagedata> "
"</imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/exitInstall.xml:21
msgid ""
"You have finished installing and configuring "
"<application>Mageia</application> and it is now safe to remove the "
"installation medium and reboot your computer."
msgstr "Završili ste instaliranje i konfiguriranje <application>Mageie</application> i sada je sigurno ukloniti instalcijski medij i napraviti reboot računala."

#. type: Content of: <section><para>
#: en/exitInstall.xml:25
msgid ""
"After reboot, in the bootloader screen, you can choose between the operating"
" systems on your computer (if you have more than one)."
msgstr ""

#. type: Content of: <section><para>
#: en/exitInstall.xml:28
msgid ""
"If you didn't adjust the settings for the bootloader, your Mageia install "
"will be automatically selected and started."
msgstr ""

#. type: Content of: <section><para>
#: en/exitInstall.xml:31
msgid "Enjoy!"
msgstr "Uživajte!"

#. type: Content of: <section><para>
#: en/exitInstall.xml:33
msgid ""
"Visit www.mageia.org if you have any questions or want to contribute to "
"Mageia"
msgstr ""

#. type: Content of: <section><info><title>
#: en/formatPartitions.xml:4
msgid "Formatting"
msgstr "Formatiram"

#.  Made by marja on 2012 03 29
#.  NEEDS TO BE REVIEWED!
#.  marja 2012-04-24 added screenshot
#.  marja 2012-04-24 added emphasis tags in formatPartitions-pa1
#. type: Content of: <section><mediaobject>
#: en/formatPartitions.xml:18
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-formatPartitions.png\""
" format=\"PNG\" align=\"center\" xml:id=\"formatPartitions-im1\"> "
"</imagedata> </imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/formatPartitions.xml:25
msgid ""
"Here you can choose which partition(s) you wish to format. Any data on "
"partitions <emphasis>not</emphasis> marked for formatting will be saved."
msgstr ""

#. type: Content of: <section><para>
#: en/formatPartitions.xml:29
msgid "Usually at least the partitions DrakX selected, need to be formatted"
msgstr "Uobičajeno je da barem particije koje je odabrao DrakX moraju biti formatirane."

#. type: Content of: <section><para>
#: en/formatPartitions.xml:32
msgid ""
"Click on <guibutton>Advanced</guibutton> to choose partitions you want to "
"check for so called <emphasis>bad blocks</emphasis>"
msgstr ""

#. type: Content of: <section><tip><para>
#: en/formatPartitions.xml:37
msgid ""
"If you're not sure you have made the right choice, you can click on "
"<guibutton>Previous</guibutton>, again on <guibutton>Previous</guibutton> "
"and then on <guibutton>Custom</guibutton> to get back to the main screen.  "
"In that screen you can choose to view what is in your partitions."
msgstr ""

#. type: Content of: <section><para>
#: en/formatPartitions.xml:44
msgid ""
"When you are confident about the selection, click on "
"<guibutton>Next</guibutton> to continue."
msgstr ""

#. type: Content of: <section><info><title>
#: en/installer.xml:17
msgid "DrakX, the Mageia Installer"
msgstr "DrakX, Mageia instalacijski program"

#. type: Content of: <section><para>
#: en/installer.xml:20
msgid ""
"Whether you are new to GNU-Linux or an experienced user, the Mageia "
"Installer is designed to help make your installation or upgrade as easy as "
"possible."
msgstr ""

#. type: Content of: <section><para>
#: en/installer.xml:28
msgid ""
"The initial menu screen has various options, however the default one will "
"start the installer, which will normally be all that you will need."
msgstr ""

#. type: Content of: <section><figure><info><title>
#: en/installer.xml:34
msgid "Installation Welcome Screen"
msgstr "Instalacijski zaslon dobrodošlice"

#. type: Content of: <section><figure>
#: en/installer.xml:33
msgid "<placeholder type=\"info\" id=\"0\"/>"
msgstr ""

#. type: Content of: <section><figure><para>
#: en/installer.xml:37
msgid "Here is the default welcome screen when using a Mageia DVD:"
msgstr ""

#. type: Content of: <section><figure><mediaobject>
#: en/installer.xml:40
msgid ""
"<imageobject> <imagedata xml:id=\"BId-drakx-intro-im1\" revision=\"1\" "
"align=\"center\" format=\"PNG\" fileref=\"../dx-welcome.png\"/> "
"</imageobject>"
msgstr ""

#. type: Content of: <section><figure>
#: en/installer.xml:39
msgid "<placeholder type=\"mediaobject\" id=\"0\"/>"
msgstr ""

#. type: Content of: <section><para>
#: en/installer.xml:46
msgid ""
"From this first screen, it is possible to set some personal preferences:"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:51
msgid ""
"The language (for the installation only, may be different that the chosen "
"language for the system) by pressing the key F2"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:57
msgid "<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:62
msgid "Use the arrow keys to select the language and press the key Enter."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:65
msgid ""
"Here is for example, the French welcome screen when using a Live DVD/CD. "
"Note that the Live DVD/CD menu does not propose: <guilabel>Rescue "
"System</guilabel>, <guilabel>Memory test</guilabel> and <guilabel>Hardware "
"Detection Tool</guilabel>."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:73
msgid "<imageobject> <imagedata fileref=\"dx-welcome4fr.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:82
msgid "Change the screen resolution by pressing the F3 key."
msgstr "Promjenite rezoluciju zaslona pritiskom na tipku F3."

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:85
msgid "<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:92
msgid "Add some kernel options by pressing the F6 key."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:94
msgid ""
"If the installation fails, then it may be necessary to try again using one "
"of the extra options. The menu called by F6 displays a new line called "
"<guilabel>Boot options</guilabel> and propose four entries:"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:99
msgid "- Default, it doesn't alter anything in the default options."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:102
msgid ""
"- Safe Settings, priority is given to the safer options to the detriment of "
"performances."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:105
msgid ""
"- No ACPI (Advanced Configuration and Power Interface), power management "
"isn't taken into account."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:108
msgid ""
"- No Local APIC (Local Advanced Programmable Interrupt Controller), it is "
"about CPU interruptions, select this option if you are asked for."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:112
msgid ""
"When you select one of these entries, it modifies the default options "
"displayed in the <guilabel>Boot Options</guilabel> line."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><note><para>
#: en/installer.xml:116
msgid ""
"In some Mageia releases, it may happen that the entries selected with the "
"key F6 does not appear in the <guilabel>Boot Options</guilabel> line, "
"however, they are really taken into account."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:123
msgid "<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:130
msgid "Add more kernel options by pressing the key F1"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:132
msgid ""
"Pressing F1 opens a new window with more available options. Select one with "
"the arrow keys and press Enter to have more details or press the Esc key to "
"go back to the welcome screen."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:139
msgid "<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:146
msgid ""
"The detailed view about the option splash. Press Esc or select "
"<guilabel>Return to Boot Options</guilabel> to go back to the options list. "
"These options can by added by hand in the <guilabel>Boot options</guilabel> "
"line."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:152
msgid "<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><note><para>
#: en/installer.xml:160
msgid "The help is translated in the chosen language with the F2 key."
msgstr ""

#. type: Content of: <section><para>
#: en/installer.xml:166
msgid ""
"Here is the default welcome screen when using a Wired Network-based "
"Installation CD (Boot.iso or Boot-Nonfree.iso images):"
msgstr ""

#. type: Content of: <section><para>
#: en/installer.xml:169
msgid ""
"It does not allow to change the language, the available options are "
"described in the screen. For more information about using a Wired Network-"
"based Installation CD, see <link "
"ns2:href=\"https://wiki.mageia.org/en/Boot.iso_install\">the Mageia "
"Wiki</link>"
msgstr ""

#. type: Content of: <section><warning><para>
#: en/installer.xml:175
msgid "The keyboard layout is the American one."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/installer.xml:179
msgid ""
"<imageobject> <imagedata revision=\"1\" xml:id=\"installer-im2\" "
"align=\"center\" format=\"PNG\" fileref=\"../dx-help.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/installer.xml:186
msgid "The installation steps"
msgstr ""

#. type: Content of: <section><section><para>
#: en/installer.xml:189
msgid ""
"The install process is divided into a number of steps, which can be followed"
" on the side panel of the screen."
msgstr ""

#. type: Content of: <section><section><para>
#: en/installer.xml:192
msgid ""
"Each step has one or more screens which may also have "
"<guibutton>Advanced</guibutton> buttons with extra, less commonly required, "
"options."
msgstr ""

#. type: Content of: <section><section><para>
#: en/installer.xml:196
msgid ""
"Most screens have <guibutton>Help</guibutton> buttons which give further "
"explanations about the current step."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/installer.xml:200
msgid ""
"If somewhere during install you decide to stop the installation, it is "
"possible to reboot, but please think twice before you do this.  Once a "
"partition has been formatted or updates have started to be installed, your "
"computer is no longer in the same state and rebooting it could very well "
"leave you with an unusable system. If in spite of this you are very sure "
"rebooting is what you want, go to a text terminal by pressing the three keys"
" <guibutton>Alt Ctrl F2</guibutton> at the same time. After that, press "
"<guibutton>Alt Ctrl Delete</guibutton> simultaneously to reboot."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/installer.xml:214
msgid "Installation Problems and Possible Solutions"
msgstr ""

#. type: Content of: <section><section><section><info><title>
#: en/installer.xml:220
msgid "No Graphical Interface"
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/installer.xml:225
msgid ""
"After the initial screen you did not reach the language selection screen. "
"This can happen with some graphic cards and older systems. Try using low "
"resolution by typing <code>vgalo</code> at the prompt."
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/installer.xml:232
msgid ""
"If the hardware is very old, a graphical installation may not be possible. "
"In this case it is worth trying a text mode installation. To use this hit "
"ESC at the first welcome screen and confirm with ENTER. You will be "
"presented with a black screen with the word \"boot:\". Type \"text\" and hit"
" ENTER. Now continue with the installation in text mode."
msgstr ""

#. type: Content of: <section><section><section><info><title>
#: en/installer.xml:244
msgid "The Install Freezes"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/installer.xml:247
msgid ""
"If the system appeared to freeze during the installation, this may be a "
"problem with hardware detection. In this case the automatic detection of "
"hardware may be bypassed and dealt with later. To try this, type "
"<code>noauto</code> at the prompt. This option may also be combined with "
"other options as necessary."
msgstr ""

#. type: Content of: <section><section><section><info><title>
#: en/installer.xml:256
msgid "RAM problem"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/installer.xml:259
msgid ""
"These will rarely be needed, but in some cases the hardware may report the "
"available RAM incorrectly. To specify this manually, you can use the "
"<code>mem=xxxM</code> parameter, where xxx is the correct amount of RAM. "
"e.g. <code>mem=256M</code> would specify 256MB of RAM."
msgstr ""

#. type: Content of: <section><section><section><info><title>
#: en/installer.xml:268
msgid "Dynamic partitions"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/installer.xml:271
msgid ""
"If you converted your hard disk from \"basic\" format to \"dynamic\" format "
"on Microsoft Windows, you must know that it is impossible to install Mageia "
"on this disc. To go back to a basic disk, see the Microsoft documentation: "
"<link ns2:href=\"http://msdn.microsoft.com/en-"
"us/library/cc776315.aspx\">http://msdn.microsoft.com/en-"
"us/library/cc776315.aspx</link>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/installUpdates.xml:3
msgid "Updates"
msgstr "Nadogradnje"

#.  Made by marja on 2012 03 30
#.  NEEDS TO BE REVIEWED!
#.  marja 20120418 removed xmlns="http://docbook.org/ns/docbook"
#. xmlns:ns5="http://www.w3.org/1999/xhtml"
#. xmlns:ns42="http://www.w3.org/1998/Math/MathML"
#. xmlns:ns4="http://www.w3.org/1999/xlink"
#. xmlns:ns3="http://www.w3.org/2000/svg"" from section tag, trying to restore
#. correct html filename
#.  marja, 2012-04-24 added screenshot
#. type: Content of: <section><mediaobject>
#: en/installUpdates.xml:13
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></imagedata> "
"</imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/installUpdates.xml:19
msgid ""
"Since this version of <application>Mageia</application> was released, some "
"packages will have been updated or improved."
msgstr ""

#. type: Content of: <section><para>
#: en/installUpdates.xml:23
msgid ""
"Choose <guilabel>yes</guilabel> if you wish to download and install them, "
"select <guilabel>no</guilabel> if you don't want to do this now, or if you "
"aren't connected to the Internet"
msgstr ""

#. type: Content of: <section><para>
#: en/installUpdates.xml:28
msgid "Then press <guibutton>Next</guibutton> to continue"
msgstr ""

#. type: Content of: <section><info><title>
#: en/media_selection.xml:3
msgid "Media Selection (Nonfree)"
msgstr ""

#.  papoteur 2013-04-11  - created
#.  marja 2013-04-16 added screenshot + made title longer (because it was the
#. same as for add_supplemental_media)
#.  marja 2013-04-16 s/in/during/ as suggested by Tristan Campbell
#. marja 2013-04-17 s/xml:id="media-selection"/xml:id="media_selection"/ (html
#. filename was wrong)
#. type: Content of: <section><mediaobject>
#: en/media_selection.xml:12
msgid ""
"<imageobject> <imagedata align=\"center\" "
"fileref=\"dx2-media_selection.png\" format=\"PNG\" revision=\"1\" xml:id"
"=\"media_selection-im1\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/media_selection.xml:18
msgid ""
"Here you have the list of available repositories. Not all repositories are "
"available, according to which media you use for installing. The repositories"
" selection determines which packages will be available for selection during "
"the next steps."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:25
msgid ""
"The <emphasis>Core</emphasis> repository cannot be disabled as it contains "
"the base of the distribution."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:30
msgid ""
"The <emphasis>Nonfree</emphasis> repository includes packages that are free-"
"of-charge, i.e. Mageia may redistribute them, but they contain closed-source"
" software (hence the name - Nonfree). For example this repository includes "
"nVidia and ATI graphics card proprietary drivers, firmware for various WiFi "
"cards, etc."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:38
msgid ""
"The <emphasis>Tainted</emphasis> repository includes packages released under"
" a free license. The main criteria for placing packages in this repository "
"is that they may infringe patents and copyright laws in some countries, e.g."
" Multimedia codecs needed to play various audio/video files; packages needed"
" to play commercial video DVD, etc."
msgstr ""

#. type: Content of: <section><info><title>
#: en/minimal-install.xml:3
msgid "Minimal Install"
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:9
msgid ""
"You can choose a Minimal Installation by de-selecting everything in the "
"Package Group Selection screen, see <xref "
"linkend=\"choosePackageGroups\"></xref>."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:10
msgid ""
"Minimal Installation is intended for those with specific uses in mind for "
"their <application>Mageia</application>, such as a server or a specialised "
"workstation. You will probably use this option combined with Manual Package "
"Selection, see <xref linkend=\"choosePackagesTree\"></xref>."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:14
msgid ""
"If you choose this installation class, then the related screen will offer "
"you a few useful extras to install, such as documentation and X."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/minimal-install.xml:19
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></imagedata> "
"</imageobject>"
msgstr ""

#. type: Content of: <section><info><title>
#: en/misc-params.xml:3
msgid "Summary of miscellaneous parameters"
msgstr ""

#.  Started by marja on 2012 03 31
#.  NEEDS TO BE WRITTEN AND REVIEWED!
#. marja - 2012 04 15 added some text, not much, unfortunately :(
#. marja 2012-04-24 added screenshots
#. JohnR 2012-04-25 Added text as requested by Psec :-)
#. marja 2012-04-24 added 2 links to other help pages
#. marja 2012-04-24 added some text in the drakxid-configureServices and
#.       the drakxid-miscellaneous section
#. marja 2012-04-24 corrected "Magaia" in the last paragraph
#. marja 2012-04-24 corrected para xml:id number in the last paragraph
#.  2012-05-01 marja - added You-Cheng Hsieh's section about IBus etc.
#.  2012-08-09 marja - replaced linkend="setupBootloaderBeginner" by
#. linkend="setupBootloader"
#. 2012-12-25 marja - moved configureTimezoneUTC, selectCountry,
#. configureServices and SecurityLevel out to separate files
#. type: Content of: <section><mediaobject>
#: en/misc-params.xml:33
msgid ""
"<imageobject> <imagedata fileref=\"dx2-summary.png\" revision=\"1\" "
"align=\"center\" format=\"PNG\" xml:id=\"summary-im1\" /> </imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/misc-params.xml:38
msgid ""
"DrakX made smart choices for the configuration of your system depending on "
"the choices you made and on the hardware DrakX detected. You can check the "
"settings here and change them if you want after pressing "
"<guibutton>Configure</guibutton>."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:45
msgid "System parameters"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:50
msgid "<guilabel>Timezone</guilabel>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:52
msgid ""
"DrakX selected a time zone for you, depending on your preferred language. "
"You can change it if needed. See also <xref "
"linkend=\"configureTimezoneUTC\"/>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:58
msgid "<guilabel>Country / Region</guilabel>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:61
msgid ""
"If you are not in the selected country, it is very important that you "
"correct the setting. See <xref linkend=\"selectCountry\"/>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:67
msgid "<guilabel>Bootloader</guilabel>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:69
msgid "DrakX has made good choices for the bootloader setting."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:72
msgid ""
"Do not change anything, unless you know how to configure Grub and/or Lilo"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:75
msgid "For more information, see <xref linkend=\"setupBootloader\"/>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:80
msgid "<guilabel>User management</guilabel>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:83
msgid ""
"You can add extra users here. They will each get their own "
"<literal>/home</literal> directories."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:89
msgid "<guilabel>Services</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:91
msgid ""
"System services refer to those small programs which run the background "
"(daemons). This tool allows you to enable or disable certain tasks."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:95
msgid ""
"You should check carefully before changing anything here - a mistake may "
"prevent your computer from operating correctly."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:99
msgid "For more information, see <xref linkend=\"configureServices\"/>"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:106
msgid "Hardware parameters"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:111
msgid "<guilabel>Keyboard</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:113
msgid ""
"This is where you setup or change your keyboard layout which will depend on "
"your location, language or type of keyboard."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:119
msgid "<guilabel>Mouse</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:121
msgid ""
"Here you can add or configure other pointing devices, tablets, trackballs "
"etc."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:126
msgid "<guilabel>Sound card</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:129
msgid ""
"The installer uses the default driver, if there is a default one. The option"
" to select a different driver is only given when there is more than one "
"driver for your card, but none of them is the default one."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:136
msgid "<guilabel>Graphical interface</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:139
msgid ""
"This section allows you to configure your graphic card(s) and displays."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:142
msgid "For more information, see <xref linkend=\"configureX_chooser\"/>."
msgstr ""

#. type: Content of: <section><section><mediaobject>
#: en/misc-params.xml:148
msgid ""
"<imageobject> <imagedata xml:id=\"summaryBottom-im1\" revision=\"1\" "
"align=\"center\" format=\"PNG\" fileref=\"dx2-summaryBottom.png\" /> "
"</imageobject>"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:156
msgid "Network and Internet parameters"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:162
msgid "<guilabel>Network</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:164
msgid ""
"You can configure your network here, but for network cards with non-free "
"drivers it is better to do that after reboot, in the <application>Mageia "
"Control Center</application>, if you have not yet enabled the Nonfree media "
"repositories."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><warning><para>
#: en/misc-params.xml:171
msgid ""
"When you add a network card, do not forget to set your firewall to watch "
"that interface as well."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:178
msgid "<guilabel>Proxies</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:180
msgid ""
"A Proxy Server acts as an intermediary between your computer and the wider "
"internet.  This section allows you to configure your computer to utilize a "
"proxy service."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:185
msgid ""
"You may need to consult your systems administrator to get the parameters you"
" need to enter here"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:194
msgid "Security"
msgstr "Sigurnost"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:199
msgid "<guilabel>Security Level</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:202
msgid ""
"Here you set the Security level for your computer, in most cases the default"
" setting (Standard) is adequate for general use."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:206
msgid "Check the option which best suits your usage."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:211
msgid "<guilabel>Firewall</guilabel>:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:213
msgid ""
"A firewall is intended to be a barrier between your important data and the "
"rascals out there on the internet who would compromise or steal it."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:217
msgid ""
"Select the services that you wish to have access to your system. Your "
"selections will depend on what you use your computer for."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><warning><para>
#: en/misc-params.xml:222
msgid "Bear in mind that allowing everything (no firewall) may be very risky."
msgstr ""

#. type: Content of: <section><info><title>
#: en/resizeFATChoose.xml:16
msgid ""
"Resize <application>Windows<superscript>®</superscript></application> "
"partition"
msgstr ""

#. type: Content of: <section><para>
#: en/resizeFATChoose.xml:20
msgid ""
"You have more than one "
"<application>Windows<superscript>®</superscript></application> partition.  "
"Choose which one should be made smaller to make space for installing "
"<application>Mageia</application>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/securityLevel.xml:12
msgid "Security Level"
msgstr "Sigurnosna Razina"

#.  2012-12-25 marja - moved this part out of misc-params.xml"
#.  2013-05-05 marja - added screenshot
#. type: Content of: <section><mediaobject>
#: en/securityLevel.xml:19
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> "
"</imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/securityLevel.xml:24
msgid "You can adjust your security level here."
msgstr ""

#. type: Content of: <section><para>
#: en/securityLevel.xml:27
msgid ""
"Leave the default settings as they are, if you don't know what to choose."
msgstr ""

#. type: Content of: <section><para>
#: en/securityLevel.xml:30
msgid ""
"After install, it will always be possible to adjust your security settings "
"in the <guilabel>Security</guilabel> part of the Mageia Control Center."
msgstr ""

#. type: Content of: <section><info><title>
#: en/SelectAndUseISOs2.xml:5
msgid "Select and use ISOs"
msgstr ""

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:9
msgid "Media"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:12
msgid "Definition"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:14
msgid ""
"Here, a medium (plural: media) is an ISO image file that allows you to "
"install and/or update Mageia and by extension any physical support the ISO "
"file is copied to."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:18
msgid ""
"You can find them <link "
"ns4:href=\"http://www.mageia.org/en/downloads/\">here</link>."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:22
msgid "Classical installation media"
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:25 en/SelectAndUseISOs2.xml:94
#: en/SelectAndUseISOs2.xml:200
msgid "Common features"
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:29
msgid "These ISOs use the traditional installer called drakx."
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:34
msgid ""
"They are able to make a clean install or an update from previous releases."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:41
msgid "DVD"
msgstr "DVD"

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:45
msgid "Different media for architecture 32 or 64 bits."
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:49
msgid ""
"Some tools are available in the Welcome screen: Rescue System, Memory Test, "
"Hardware Detection Tool."
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:54
msgid "Each DVD contains many available desktop environments and languages."
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:59
msgid ""
"You'll be given the choice during the installation to add non free software."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:66
msgid "DVD dual arch"
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:70
msgid ""
"Both architectures are present on the same medium, the choice is made "
"automatically according to the detected CPU."
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:75
msgid "Uses Xfce desktop only."
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:79
msgid ""
"Not all languages are available. (be, bg, ca, de, en, es, fr, it, mk, pl, "
"pt, ru, sv, uk) TO BE CHECKED!"
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:84
msgid "It contains non free software."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:91
msgid "Live media"
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:98
msgid ""
"Can be used to preview the distribution without installing it on a HDD, and "
"optionally install Mageia on to your HDD."
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:103
msgid "Each ISO contains only one desktop environment (KDE or GNOME)."
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:108 en/SelectAndUseISOs2.xml:172
#: en/SelectAndUseISOs2.xml:190 en/SelectAndUseISOs2.xml:220
msgid "Different media for 32 or 64 bit architectures."
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:112
msgid ""
"<emphasis role=\"bold\">Live ISOs can only be used to create clean "
"installations, they cannot be used to upgrade from previous "
"releases.</emphasis>"
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:118
msgid "They contain non free software."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:124
msgid "Live CD KDE"
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:128 en/SelectAndUseISOs2.xml:164
msgid "KDE desktop environment only."
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:132 en/SelectAndUseISOs2.xml:150
#: en/SelectAndUseISOs2.xml:224
msgid "English language only."
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:136 en/SelectAndUseISOs2.xml:154
msgid "32 bit only."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:142
msgid "Live CD GNOME"
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:146 en/SelectAndUseISOs2.xml:182
msgid "GNOME desktop environment only."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:160
msgid "Live DVD KDE"
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:168 en/SelectAndUseISOs2.xml:186
msgid "All languages are present."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:178
msgid "Live DVD GNOME"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:197
msgid "Boot-only CD media"
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:204
msgid ""
"Each one is a small image that contains no more than that which is needed to"
" start the drakx installer and find drakx-installer-stage2 and other "
"packages that are needed to continue and complete the install. These "
"packages may be on the PC hard disk, on a local drive, on a local network or"
" on the Internet."
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:213
msgid ""
"These media are very light (less than 100 MB) and are convenient when "
"bandwidth is too low to download a full DVD, a PC without a DVD drive or a "
"PC that can't boot from a USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:230
msgid "boot.iso"
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:234
msgid ""
"Contains only free software, for those people who refuse to use non-free "
"software."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:241
msgid "boot-nonfree.iso"
msgstr ""

#. type: Content of:
#. <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:245
msgid ""
"Contains non-free software (mostly drivers, codecs...) for people who need "
"it."
msgstr ""

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:254
msgid "Downloading and Checking Media"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:257
msgid "Downloading"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:259
msgid ""
"Once you have chosen your ISO file, you can download it using either http or"
" BitTorrent. In both cases, a window gives you some information, such as the"
" mirror in use and the possibility to change if the bandwidth is to low. If "
"http is chosen, you may also see something like"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:266
msgid ""
"<imageobject> <imagedata fileref=\"Checking.png\" contentwidth=\"650\"/> "
"</imageobject>"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:271
msgid ""
"md5sum and sha1sum are tools to check the ISO integrity. Use only one of "
"them. Both hexadecimal numbers have been calculated by an algorithm from the"
" file to be downloaded. When you ask these algorithms to recalculate this "
"number from your downloaded file, either you have the same number and your "
"downloaded file is correct, or the number is different and you have a "
"failure. A failure infers that you should retry the download.Then this "
"window appears:"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:280
msgid "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:285
msgid "Check the radio button Save File."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:289
msgid "Checking the downloaded media integrity"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:291
msgid "Open a console, no need to be root, and:"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:293
msgid ""
"- To use md5sum, type: [sam@localhost]$ <userinput>md5sum "
"path/to/the/image/file.iso</userinput>."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:296
msgid ""
"- To use sha1sum, type: [sam@localhost]$ <userinput>sha1sum "
"path/to/the/image/file.iso</userinput>."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:299
msgid ""
"and compare the obtained number on your computer (you may have to wait for a"
" while) with the number given by Mageia. Example:"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:303
msgid ""
"<imageobject> <imagedata fileref=\"../Md5sum.png\" contentwidth=\"650\"/> "
"</imageobject>"
msgstr ""

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:313
msgid "Burn or dump the ISO"
msgstr ""

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:315
msgid ""
"The checked ISO can now be burned to a CD or DVD or dumped to a USB stick. "
"These operations are not a simple copy and aim to make a boot-able medium."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:320
msgid "Burning the ISO to a CD/DVD"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:322
msgid ""
"Use whatever burner you wish but ensure the burning device is set correctly "
"to <emphasis role=\"bold\">burn an image</emphasis>, burn data or files is "
"not correct. There is more information in <link "
"ns4:href=\"https://wiki.mageia.org/en/Writing_CD_and_DVD_images\">the Mageia"
" wiki</link>."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:329
msgid "Dump the ISO to a USB stick"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:331
msgid ""
"All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick "
"and then use it to boot and install the system."
msgstr ""

#. type: Content of: <section><section><section><warning><para>
#: en/SelectAndUseISOs2.xml:335
msgid ""
"\"dumping\" an image onto a flash device destroys any previous file-system "
"on the device; any other data will be lost and the partition capacity will "
"be reduced to the image size."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:340
msgid "To recover the original capacity, you must re-format the USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:344
msgid "Using Mageia"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:346
msgid ""
"You can use a graphical tool like <link "
"ns4:href=\"https://wiki.mageia.org/en/IsoDumper_Writing_ISO_images_on_USB_sticks\">IsoDumper</link>"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:348
msgid "You can also use the dd tool in a console:"
msgstr ""

#. type: Content of:
#. <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:352
msgid "Open a console"
msgstr ""

#. type: Content of:
#. <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:356
msgid ""
"Become root with the command <userinput>su -</userinput> (don't forget the "
"final '-' )"
msgstr ""

#. type: Content of:
#. <section><section><section><section><orderedlist><listitem><mediaobject>
#: en/SelectAndUseISOs2.xml:360
msgid ""
"<imageobject> <imagedata contentwidth=\"650\" fileref=\"../Root.png\"/> "
"</imageobject>"
msgstr ""

#. type: Content of:
#. <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:367
msgid ""
"Plug your USB stick (do not mount it, this also means do not open any "
"application or file manager that could access or read it)"
msgstr ""

#. type: Content of:
#. <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:373
msgid "Enter the command <userinput>fdisk -l</userinput>"
msgstr ""

#. type: Content of:
#. <section><section><section><section><orderedlist><listitem><mediaobject>
#: en/SelectAndUseISOs2.xml:376
msgid ""
"<imageobject> <imagedata fileref=\"../Fdisk.png\" contentwidth=\"650\"/> "
"</imageobject>"
msgstr ""

#. type: Content of:
#. <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:383
msgid ""
"Find the device name for your USB stick (by its size), for example /dev/sdb "
"in the screenshot above, it is a 8Go USB stick."
msgstr ""

#. type: Content of:
#. <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:389
msgid ""
"Enter the command: # <userinput>dd if=path/to/the/ISO/file of=/dev/sdX "
"bs=1M</userinput>"
msgstr ""

#. type: Content of:
#. <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:392
msgid "Where X=your device name eg: /dev/sdc"
msgstr ""

#. type: Content of:
#. <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:394
msgid ""
"Example: # <userinput>dd if=/home/user/Downloads/Mageia-4-x86_64-DVD.iso "
"of=/dev/sdb bs=1M</userinput>"
msgstr ""

#. type: Content of:
#. <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:400
msgid "Enter the command: # <userinput>sync</userinput>"
msgstr ""

#. type: Content of:
#. <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:404
msgid "Unplug your USB stick, it is done"
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:410
msgid "Using Windows"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:412
msgid "You could try:"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:414
msgid "- <link ns4:href=\"http://rufus.akeo.ie/?locale=en_US\">Rufus</link>"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:416
msgid ""
"- <link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 "
"Disk Imager</link>"
msgstr ""

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:425
msgid "Mageia Installation"
msgstr ""

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:427
msgid ""
"This step is detailed in <link "
"ns4:href=\"http://www.mageia.org/en/doc/\">the Mageia documentation</link>."
msgstr ""

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:430
msgid ""
"More information is available in <link "
"ns4:href=\"https://wiki.mageia.org/en/Category:Documentation\">the Mageia "
"wiki</link>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectCountry.xml:13
msgid "Select your Country / Region"
msgstr ""

#.  2012-12-25 marja - moved this section out of misc-params
#.  2013-05-05 marja - added screenshot
#. type: Content of: <section><mediaobject>
#: en/selectCountry.xml:21
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-selectCountry.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"selectCountry-im1\"></imagedata> "
"</imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/selectCountry.xml:27
msgid ""
"Select your country or region. This is important for all kinds of settings, "
"like the currency and wireless regulatory domain. Setting the wrong country "
"can lead to not being able to use a Wireless network."
msgstr ""

#. type: Content of: <section><para>
#: en/selectCountry.xml:32
msgid ""
"If your country isn't in the list, click the <guilabel>Other "
"Countries</guilabel> button and choose your country / region there."
msgstr ""

#. type: Content of: <section><note><para>
#: en/selectCountry.xml:37
msgid ""
"If your country is only in the <guilabel>Other Countries</guilabel> list, "
"after clicking <guibutton>OK</guibutton> it may seem a country from the "
"first list was chosen. Please ignore this, DrakX will follow your real "
"choice."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/selectCountry.xml:46
msgid "Input method"
msgstr ""

#. type: Content of: <section><section><para>
#: en/selectCountry.xml:49
msgid ""
"In the <guilabel>Other Countries</guilabel> screen you can also select an "
"input method (at the bottom of the list). Input methods allow users to input"
" multilingual characters (Chinese, Japanese, Korean, etc). IBus is the "
"default input method in Mageia DVDs, Africa/India and Asia/no-India Live-"
"CDs. For Asian and African locales, IBus will be set as default input method"
" so users should not need to configure it manually. Other input "
"methods(SCIM, GCIN, HIME, etc) also provide similar functions and can be "
"installed if you added HTTP/FTP media before package selection."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/selectCountry.xml:61
msgid ""
"If you missed the input method setup during installation, you can access it "
"after you boot your installed system via \"Configure your Computer\" -&gt; "
"\"System\", or by running localedrake as root."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectInstallClass.xml:21
msgid "Install or Upgrade"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/selectInstallClass.xml:25
msgid ""
"<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" "
"align=\"center\" format=\"PNG\"></imagedata> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:32
msgid "Install"
msgstr "Instaliraj"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:34
msgid ""
"Use this option for a fresh <application>Mageia</application> installation."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:39
msgid "Upgrade"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:41
msgid ""
"If you have one or more <application>Mageia</application> installations on "
"your system, the installer will allow you to upgrade one of them to the "
"latest release."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><warning><para>
#: en/selectInstallClass.xml:45
msgid ""
"Only upgrading from a previous Mageia version that was <emphasis>still "
"supported</emphasis> when this installer's version was released, has been "
"thoroughly tested. If you want to upgrade a Mageia version that had already "
"reached its End\tOf Life when this one was released, then it is better to do"
" a clean install while preserving your <literal>/home</literal> partition."
msgstr ""

#. type: Content of: <section><note><para>
#: en/selectInstallClass.xml:56
msgid ""
"If during install you decide to stop the installation, it is possible to "
"reboot, but please think twice before you do this. Once a partition has been"
" formatted or updates have started to be installed, your computer isn't in "
"the same state anymore and rebooting it could very well leave you with an "
"unusable system. If in spite of that you are very sure rebooting is what you"
" want, go to a text terminal by pressing the three keys <guilabel>Alt Ctrl "
"F2</guilabel> at the same time. After that, press <guilabel>Alt Ctrl "
"Delete</guilabel> simultaneously to reboot."
msgstr ""

#. type: Content of: <section><tip><para>
#: en/selectInstallClass.xml:67
msgid ""
"If you have discovered that you forgot to select an additional language, you"
" can return from the \"Install or Upgrade\" screen to the language choice "
"screen by pressing <guilabel>Alt Ctrl Home</guilabel>. Do "
"<emphasis>not</emphasis> do this later in the install."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectKeyboard.xml:14
msgid "Keyboard"
msgstr "Tipkovnica"

#. type: Content of: <section><para>
#: en/selectKeyboard.xml:17
msgid ""
"DrakX selects an appropriate keyboard for your language. If no suitable "
"keyboard is found it will default to a US keyboard layout."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/selectKeyboard.xml:22
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png\""
" /> </imageobject>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:30
msgid ""
"Make sure that the selection is correct or choose another keyboard layout. "
"If you don't know which layout your keyboard has, look in the specifications"
" that came with your system, or ask the computer vendor. There may even be a"
" label on the keyboard that identifies the layout. You can also look here: "
"<link "
"xlink:href=\"http://en.wikipedia.org/wiki/Keyboard_layout\">en.wikipedia.org/wiki/Keyboard_layout</link>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:40
msgid ""
"If your keyboard isn't in the list shown, click on "
"<guibutton>More</guibutton> to get a full list, and select your keyboard "
"there."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para><warning><para>
#: en/selectKeyboard.xml:45
msgid ""
"After choosing a keyboard from the <guibutton>More</guibutton> dialog, "
"you'll return to the first keyboard choice dialog and it will seem as though"
" a keyboard from that screen was chosen. You can safely ignore this anomaly "
"and continue the installation: Your keyboard is the one you chose from the "
"full list."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:55
msgid ""
"If you choose a keyboard based on non-Latin characters, you will see an "
"extra dialog screen asking how you would prefer to switch between the Latin "
"and non-Latin keyboard layouts"
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectLanguage.xml:23
msgid "Please choose a language to use"
msgstr "Molim izaberite jezik koji želite koristiti"

#. type: Content of: <section><para>
#: en/selectLanguage.xml:26
msgid ""
"Select your preferred language, by first expanding the list for your "
"continent. <application>Mageia</application> will use this selection during "
"the installation and for your installed system."
msgstr ""

#. type: Content of: <section><para>
#: en/selectLanguage.xml:30
msgid ""
"If it is likely that you will require several languages installed on your "
"system, for yourself or other users, then you should use the "
"<guibutton>Multiple languages</guibutton> button to add them now. It will be"
" difficult to add extra language support after installation."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/selectLanguage.xml:36
msgid ""
"<imageobject> <imagedata fileref=\"dx2-selectLanguage.png\" align=\"center\""
" format=\"PNG\" > </imagedata> </imageobject>"
msgstr ""

#. type: Content of: <section><warning><para>
#: en/selectLanguage.xml:44
msgid ""
"Even if you choose more than one language, you must first choose one of them"
" as your preferred language in the first language screen. It will also be "
"marked as chosen in the multiple languages screen ."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:51
msgid ""
"If your keyboard language is not the same as your preferred language, then "
"it is advisable to install the language of your keyboard as well."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:57
msgid ""
"Mageia uses UTF-8 (Unicode) support by default. This may be disabled in the "
"\"multiple languages\" screen if you know that it is inappropriate for your "
"language. Disabling UTF-8 applies to all installed languages."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:64
msgid ""
"You can change the language of your system after installation in the Mageia "
"Control Center -&gt; System -&gt; Manage localization for your system."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectMouse.xml:4
msgid "Select mouse"
msgstr ""

#.  Made by marja on 2012 04 11
#.  NEEDS TO BE REVIEWED!
#.  adding some "real" text now that we know the page shows up in the right
#. place
#.  marja 2012-04-24 adding screenshot
#. type: Content of: <section><mediaobject>
#: en/selectMouse.xml:16
msgid ""
"<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" "
"format=\"PNG\" > </imagedata> </imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/selectMouse.xml:23
msgid ""
"If you are not happy with how your mouse responds, you can select a "
"different one here."
msgstr ""

#. type: Content of: <section><para>
#: en/selectMouse.xml:25
msgid ""
"Usually, <guilabel>Universal</guilabel> - <guilabel>Any PS/2 and USB "
"mice</guilabel> is a good choice."
msgstr ""

#. type: Content of: <section><para>
#: en/selectMouse.xml:27
msgid ""
"Select <guilabel>Universal</guilabel> - <guilabel>Force evdev</guilabel> to "
"configure the buttons that do not work on a mouse with six or more buttons."
msgstr ""

#. type: Content of: <section><info><title>
#: en/setupBootloaderAddEntry.xml:3
msgid "Add or Modify a Boot Menu Entry"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/setupBootloaderAddEntry.xml:8
msgid ""
"<imageobject> <imagedata revision=\"1\" "
"fileref=\"dx2-bootloaderConfiguration.png\" align=\"center\" format=\"PNG\" "
"xml:id=\"bootloaderConfiguration-im1\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:13
msgid ""
"You can add an entry or modify the one you select first, by pressing the "
"relevant button in the <emphasis>Bootloader Configuration</emphasis> screen "
"and editing the screen that pops up on top of it."
msgstr ""

#. type: Content of: <section><note><para>
#: en/setupBootloaderAddEntry.xml:18
msgid ""
"If you have chosen <code>Grub 2</code> as your bootloader, you cannot use "
"this tool to edit entries at this step, press 'Next'. You need to manually "
"edit <code>/boot/grub2/custom.cfg</code> or use <code>grub-customizer</code>"
" instead."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/setupBootloaderAddEntry.xml:25
msgid ""
"<imageobject> <imagedata revision=\"1\" xml:id=\"setupBootloaderAddEntry-"
"im1\" align=\"center\" format=\"PNG\" "
"fileref=\"dx2-setupBootloaderAddEntry.png\"/> </imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:30
msgid ""
"Some things that can be done without any risk, are changing the label of an "
"entry and ticking the box to make an entry the default one."
msgstr ""

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:33
msgid ""
"You can add the proper version number of an entry, or rename it completely."
msgstr ""

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:36
msgid ""
"The default entry is the one the systems boots into if you don't make a "
"choice while booting up."
msgstr ""

#. type: Content of: <section><warning><para>
#: en/setupBootloaderAddEntry.xml:40
msgid ""
"Editing other things can leave you with an unbootable system. Please don't "
"just try something without knowing what you are doing."
msgstr ""

#. type: Content of: <section><info><title>
#: en/setupBootloader.xml:3
msgid "Bootloader main options"
msgstr "Glavne postavke bootloadera"

#.  2012-08-12 Copied this page, setupBootloader.xml,  from
#. setupBootloaderBeginner.xml and REMOVED the string "Beginner" everywhere,
#. except in this sentence.
#.  2013-3-30 Removed refernce to bootloader expert page and suggest using
#. grub2 where other grub2 systems exist
#. type: Content of: <section><mediaobject>
#: en/setupBootloader.xml:11
msgid ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" "
"fileref=\"dx2-setupBootloader.png\" xml:id=\"setupBootloader-im1\" "
"format=\"PNG\" /> </imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/setupBootloader.xml:16
msgid ""
"If you prefer different bootloader settings to those chosen automatically by"
" the installer, you can change them here."
msgstr ""

#. type: Content of: <section><para>
#: en/setupBootloader.xml:20
msgid ""
"You may already have another operating system on your machine, in which case"
" you need to decide whether to add Mageia to your existing bootloader, or "
"allow Mageia to create a new one."
msgstr ""

#. type: Content of: <section><tip><para>
#: en/setupBootloader.xml:26
msgid "The Mageia graphical menus are nice :)"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/setupBootloader.xml:32
msgid "Using a Mageia bootloader"
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:36
msgid ""
"By default, Mageia writes a new GRUB (legacy) bootloader into the MBR "
"(Master Boot Record) of your first hard drive. If you already have other "
"operating systems installed, Mageia attempts to add them to your new Mageia "
"boot menu."
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:41
msgid ""
"Mageia now also offers GRUB2 as an optional bootloader in addition to GRUB "
"legacy and Lilo."
msgstr ""

#. type: Content of: <section><section><warning><para>
#: en/setupBootloader.xml:45
msgid ""
"Linux systems which use the GRUB2 bootloader are not currently supported by "
"GRUB (legacy) and will not be recognised if the default GRUB bootloader is "
"used."
msgstr ""

#. type: Content of: <section><section><warning><para>
#: en/setupBootloader.xml:49
msgid ""
"The best solution here is to use the GRUB2 bootloader which is available at "
"the Summary page during installation."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/setupBootloader.xml:56
msgid "Using an existing bootloader"
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:60
msgid ""
"If you decide to use an existing bootloader then you will need to remember "
"to STOP at the summary page during the installation and click the Bootloader"
" <guibutton>Configure</guibutton> button, which will allow you to change the"
" bootloader install location."
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:66
msgid ""
"Do not select a device e.g.\"sda\", or you will overwrite your existing MBR."
" You must select the root partition that you chose during the partitioning "
"phase earlier, e.g.  sda7."
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:71
msgid "To be clear, sda is a device, sda7 is a partition on that device."
msgstr ""

#. type: Content of: <section><section><tip><para>
#: en/setupBootloader.xml:75
msgid ""
"Go to tty2 with Ctrl+Alt+F2 and type <literal>df</literal> to check where "
"your <literal>/</literal> (root) partition is. Ctrl+Alt+F7 takes you back to"
" the installer screen."
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:81
msgid ""
"The exact procedure for adding your Mageia system to an existing bootloader "
"is beyond the scope of this help, however in most cases it will involve "
"running the relevant bootloader installation program which should detect and"
" add it automatically. See the documentation for the operating system in "
"question."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/setupBootloader.xml:91
msgid "Bootloader advanced option"
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:95
msgid ""
"If you have very limited disk space for the <literal>/</literal> partition "
"that contains <literal>/tmp</literal>, click on "
"<guibutton>Advanced</guibutton> and check the box for <guilabel>Clean /tmp "
"at each boot</guilabel>. This helps to maintain some free space."
msgstr ""

#. type: Content of: <section><info><title>
#: en/setupSCSI.xml:11
msgid "Setup SCSI"
msgstr ""

#.  Made by marja on 2012 04 02
#.  NEEDS TO BE REVIEWED!
#.  JohnR - edited 2012-03-03
#.  SimonNZG has reviewed 2012-04-03 (changed editted to edited in JohnR's
#. comment ;-)
#.  barjac has re-reviewed and made some minor tweaks. Revisions incremented.
#.  marja 2012-04-24 added screenshot
#.  marja 2012-04-25 replacing John's version 1.6 because that one was based
#. on the
#.        Mdv doc instead of on our setupSCSI file
#. type: Content of: <section><mediaobject>
#: en/setupSCSI.xml:26
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> "
"</imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/setupSCSI.xml:32
msgid ""
"DrakX usually detects hard disks correctly. With some older SCSI controllers"
" it may be unable to determine the correct drivers to use and subsequently "
"fail to recognise the drive."
msgstr ""

#. type: Content of: <section><para>
#: en/setupSCSI.xml:36
msgid ""
"If this happens, you will need to manually tell Drakx which SCSI drive(s) "
"you have."
msgstr ""

#. type: Content of: <section><para>
#: en/setupSCSI.xml:39
msgid "DrakX should then be able to configure the drive(s) correctly."
msgstr ""

#. type: Content of: <section><info><title>
#: en/soundConfig.xml:11
msgid "Sound Configuration"
msgstr "Konfiguracija zvuka"

#.  Started by marja on 2013-12-07
#. type: Content of: <section><mediaobject>
#: en/soundConfig.xml:17
msgid ""
"<imageobject> <imagedata fileref=\"dx2-soundConfig.png\" revision=\"1\" "
"format=\"PNG\" xml:id=\"soundConfig-im1\" /> </imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/soundConfig.xml:23
msgid ""
"In this screen the name of the driver that the installer chose for your "
"sound card is given, which will be the default driver if we have a default "
"one."
msgstr ""

#. type: Content of: <section><para>
#: en/soundConfig.xml:27
msgid ""
"The default driver should work without problems. However, if after install "
"you do encounter problems, then run <command>draksound</command> or start "
"this tool via MCC (Mageia Control Center), by choosing the "
"<guilabel>Hardware</guilabel> tab and clicking on <guilabel>Sound "
"Configuration</guilabel> at the top right of the screen."
msgstr ""

#. type: Content of: <section><para>
#: en/soundConfig.xml:33
msgid ""
"Then, in the draksound or \"Sound Configuration\" tool screen, click on "
"<guibutton>Advanced</guibutton> and then on "
"<guibutton>Troubleshooting</guibutton> to find very useful advice about how "
"to solve the problem."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/soundConfig.xml:41
msgid "Advanced"
msgstr "Napredno"

#. type: Content of: <section><section><para>
#: en/soundConfig.xml:44
msgid ""
"Clicking <guibutton>Advanced</guibutton> in this screen, during install, is "
"useful if there is no default driver and there are several drivers "
"available, but you think the installer selected the wrong one."
msgstr ""

#. type: Content of: <section><section><para>
#: en/soundConfig.xml:49
msgid ""
"In that case you can select a different driver after clicking on "
"<guibutton>Let me pick any driver</guibutton>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/takeOverHdConfirm.xml:4
msgid "Confirm hard disk to be formatted"
msgstr ""

#.  Made by marja on 2012 04 03
#.  test comment - johnr
#.  2012-04-24 marja - replaced "if you are not sure you selected the correct
#.     hard disk." with "if you are not sure about your choice", because I'm
#. sure I
#.     saw this help screen when I had only one HD
#.  2013-05-05 marja added screenshot
#. type: Content of: <section><mediaobject>
#: en/takeOverHdConfirm.xml:19
msgid ""
"<imageobject> <imagedata fileref=\"dx2-takeOverHdConfirm.png\" "
"format=\"PNG\" align=\"center\" ></imagedata> </imageobject>"
msgstr ""

#. type: Content of: <section><para>
#: en/takeOverHdConfirm.xml:24
msgid ""
"Click on <guibutton>Previous</guibutton> if you are not sure about your "
"choice."
msgstr ""

#. type: Content of: <section><para>
#: en/takeOverHdConfirm.xml:27
msgid ""
"Click on <guibutton>Next</guibutton> if you are sure and want to erase every"
" partition, every operating system and all data on that hard disk."
msgstr ""

#. type: Content of: <section><info><title>
#: en/uninstall-Mageia.xml:3
msgid "Uninstalling Mageia"
msgstr ""

#. type: Content of: <section><section><title>
#: en/uninstall-Mageia.xml:9
msgid "Howto"
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:11
msgid ""
"If Mageia didn't convince you or you can't install it correctly, in short "
"you want get rid of it. That is your right and Mageia also gives you the "
"possibility to uninstall. This is not true for every operating system."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:16
msgid ""
"After your data backup, reboot your installation Mageia DVD and select "
"Rescue system, then, Restore Windows boot loader. At the next boot, you will"
" only have Windows with no option to choose your operating system."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:20
msgid ""
"To recover the space used by Mageia partitions on Windows, click on "
"<code>Start -> Control Panel -> Administrative Tools -> Computer Management "
"-> Storage -> Disk Management</code> to access to the partition management. "
"You will recognize the Mageia partition because they are labeled "
"<guilabel>Unknown</guilabel>, and also by their size and place in the disk. "
"Right click on each of these partitions and select "
"<guibutton>Delete</guibutton>. The space will be freed."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:28
msgid ""
"If you are using Windows XP, you can create a new partition and format it "
"(FAT32 or NTFS). It will get a partition letter."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:31
msgid ""
"If you have Vista or 7, you have one more possibility, you can extend the "
"existing partition that is at the left of the freed space.  There are other "
"partitioning tools that can be used, such as gparted, available for both "
"windows and linux. As always, when changing partitions, be very careful, and"
" make sure all important things have been backed up."
msgstr ""