# SOME DESCRIPTIVE TITLE # Copyright (C) YEAR Mageia # This file is distributed under the same license as the Mageia Installer Help package. # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: Mageia Installer Help 3.0\n" "Report-Msgid-Bugs-To: doc-discuss@ml.mageia.org\n" "POT-Creation-Date: 2013-10-09 20:39+0400\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Language-Team: LANGUAGE <LL@li.org>\n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" #. type: Content of: <section><info><title> #: en/acceptLicense.xml:32 msgid "License and Release Notes" msgstr "" #. type: Content of: <section><mediaobject> #: en/acceptLicense.xml:36 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-license.png\" " "format=\"PNG\" revision=\"1\" xml:id=\"acceptLicense-im1\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><info><title> #: en/acceptLicense.xml:45 msgid "License Agreement" msgstr "" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:48 msgid "" "Before installing <application>Mageia</application>, please read the license " "terms and conditions carefully." msgstr "" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:51 msgid "" "These terms and conditions apply to the entire " "<application>Mageia</application> distribution and must be accepted before " "you can continue." msgstr "" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:55 msgid "" "To accept, simply select <guilabel>Accept</guilabel> and then click on " "<guibutton>Next</guibutton>." msgstr "" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:58 msgid "" "If you decide not to accept these conditions, then we thank you for " "looking. Clicking <guibutton>Quit</guibutton> will reboot your computer." msgstr "" #. type: Content of: <section><section><info><title> #: en/acceptLicense.xml:68 msgid "Release Notes" msgstr "" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:75 msgid "" "To see what's new in this release of <application>Mageia</application>, " "click on the <guibutton>Release Notes</guibutton> button." msgstr "" #. type: Attribute 'xml:lang' of: <section> #: en/add_supplemental_media.xml:2 en/DrakX.xml:1 en/media_selection.xml:1 msgid "en" msgstr "" #. type: Content of: <section><info><title> #: en/add_supplemental_media.xml:10 msgid "Media Selection (Configure Supplemental Installation Media)" msgstr "" #. papoteur 2013-04-13 - created #. marja 2013-04-16 added screenshot and expanded title (because is was the same as for media_selection #. marja 2013-04-16 s/a optical/an optcal/ s/support/disc/ s/or or/or/ s/at/during/ as suggested by Tristan Campbell #. type: Content of: <section><mediaobject> #: en/add_supplemental_media.xml:18 msgid "" "<imageobject> <imagedata align=\"center\" " "fileref=\"dx2-add_supplemental_media.png\" format=\"PNG\" revision=\"1\" " "xml:id=\"dx2-add_supplemental_media-im1\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/add_supplemental_media.xml:24 msgid "" "This screen gives you the list of already recognized repositories. You can " "add other sources for packages, like an optical disc or a remote source. The " "source selection determines which packages will be available for selection " "during the next steps." msgstr "" #. type: Content of: <section><para> #: en/add_supplemental_media.xml:29 msgid "For a network source, there are two steps to follow:" msgstr "" #. type: Content of: <section><orderedlist><listitem><para> #: en/add_supplemental_media.xml:33 msgid "Choosing and activation of the network, if not already up." msgstr "" #. type: Content of: <section><orderedlist><listitem><para> #: en/add_supplemental_media.xml:37 msgid "" "Selecting a mirror or specifying a URL (very first entry). By selecting a " "mirror, you have access to the selection of all repositories managed by " "Mageia, like the Nonfree , the Tainted repositories and the Updates. With " "the URL, you can designate a specific repository or your own NFS " "installation." msgstr "" #. type: Content of: <section><info><title> #: en/addUser.xml:4 msgid "User and Superuser Management" msgstr "" #. Started by marja,using Led43's text, on 2012 03 27 #. NEEDS TO BE REVIEWED! #. SimonNZG 2012-04-03 has taken a look but needs to come back #. removed para xml:id's, finished the page using Led43's text in the wiki, but #. changed his text about the Advanced User Managment screen (the only thing #. about guest account there, is the box you can tick or untick to enable or #. disable it, the rest is about the normal user you're adding in the previous #. screen), marja, 20120409 #. barjac 2012-04-13 moved explanation of xguest lower down. I don't understand #. "rbash" in the xguest warning - is that correct? #. JohnR 2012-04-19 Language proofreading #. marja 2012-04-24 Added screenshot #. marja 2013-04-26 added new note #. type: Content of: <section><mediaobject> #: en/addUser.xml:27 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setRootPassword.png\" " "format=\"PNG\" align=\"center\" xml:id=\"setRootPassword-im1\"></imagedata> " "</imageobject>" msgstr "" #. type: Content of: <section><section><info><title> #: en/addUser.xml:34 msgid "Set Administrator (root) Password:" msgstr "" #. type: Content of: <section><section><para> #: en/addUser.xml:38 msgid "" "It is advisable for all <application>Mageia</application> installations to " "set a superuser or administrator's password, usually called the " "<emphasis>root password</emphasis> in Linux. As you type a password into the " "top box the colour of its shield will change from red to yellow to green " "depending on the strength of the password. A green shield shows you are " "using a strong password. You need to repeat the same password in the box " "just below the first password box, this checks that you have not mistyped " "the first password by comparing them." msgstr "" #. type: Content of: <section><section><note><para> #: en/addUser.xml:48 msgid "" "All passwords are case sensitive, it is best to use a mixture of letters " "(upper and lower case), numbers and other characters in a password." msgstr "" #. type: Content of: <section><section><info><title> #: en/addUser.xml:56 msgid "Enter a user" msgstr "" #. type: Content of: <section><section><para> #: en/addUser.xml:59 msgid "" "Add a user here. A user has fewer rights than the superuser (root), but " "enough to surf the internet, use office applications or play games and " "anything else the average user does with his computer" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:65 msgid "" "<guibutton>Icon</guibutton>: if you click on this button it will change the " "users icon." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:70 msgid "" "<guilabel>Real Name</guilabel>: Insert the users real name into this text " "box." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:75 msgid "" "<guilabel>Login Name</guilabel>: Here you enter the user login name or let " "drakx use a version of the users real name. <emphasis>The login name is case " "sensitive.</emphasis>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:81 msgid "" "<guilabel>Password</guilabel>: In this text box you should type in the user " "password. There is a shield at the end of the text box that indicates the " "strength of the password. (See also <xref linkend=\"givePassword\"></xref>)" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:87 msgid "" "<guilabel>Password (again)</guilabel>: Retype the user password into this " "text box and drakx will check you have the same password in each of the user " "password text boxes." msgstr "" #. type: Content of: <section><section><note><para> #: en/addUser.xml:94 msgid "" "Any user you add while installing Mageia, will have a world readable (but " "write protected) home directory." msgstr "" #. type: Content of: <section><section><note><para> #: en/addUser.xml:97 msgid "" "However, while using your new install, any user you add in <emphasis>MCC - " "System - Manage users on system</emphasis> will have a home directory that " "is both read and write protected." msgstr "" #. type: Content of: <section><section><note><para> #: en/addUser.xml:101 msgid "" "If you don't want a world readable home directory for anyone, it is advised " "to only add a temporary user now and to add the real one(s) after reboot." msgstr "" #. type: Content of: <section><section><note><para> #: en/addUser.xml:105 msgid "" "If you prefer world readable home directories, you might want to add all " "extra needed users in the <emphasis>Configuration - Summary</emphasis> step " "during the install. Choose <emphasis>User management</emphasis>." msgstr "" #. type: Content of: <section><section><note><para> #: en/addUser.xml:109 msgid "The access permissions can also be changed after the install." msgstr "" #. type: Content of: <section><section><info><title> #: en/addUser.xml:116 msgid "Advanced User Management" msgstr "" #. type: Content of: <section><section><para> #: en/addUser.xml:119 msgid "" "If the <guibutton>advanced</guibutton> button is clicked you are offered a " "screen that allows you to edit the settings for the user you are " "adding. Additionally, you can disable or enable a guest account." msgstr "" #. type: Content of: <section><section><warning><para> #: en/addUser.xml:124 msgid "" "Anything a guest with a default <emphasis>rbash</emphasis> guest account " "saves to his /home directory will be erased when he logs out. The guest " "should save his important files to a USB key." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:131 msgid "" "<guilabel>Enable guest account</guilabel>: Here you can enable or disable a " "guest account. The guest account allows a guest to log into and use the PC, " "but he has more restricted access than normal users." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:138 msgid "" "<guilabel>Shell</guilabel>: This drop down list allows you to change the " "shell used by the user you are adding in the previous screen, options are " "Bash, Dash and Sh" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:144 msgid "" "<guilabel>User ID</guilabel>: Here you can set the user ID for the user you " "are adding in the previous screen. This is a number. Leave it blank unless " "you know what you are doing." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:150 msgid "" "<guilabel>Group ID</guilabel>: This lets you set the group ID. Also a " "number, usually the same one as for the user. Leave it blank unless you know " "what you are doing." msgstr "" #. type: Content of: <section><info><title> #: en/ask_mntpoint_s.xml:11 msgid "Choose the mount points" msgstr "" #. Made by marja on 2012 03 28 #. NEEDS TO BE REVIEWED! #. SimonNZG 2012-04-03 has taken a look but needs to come back #. removed para xml:id's, marja, 20120409 #. barjac 14/04/2012 Minor edit to improve grammar and replaced "at least ONE" #. with "a", as I can't imagine having more than one root partition ;) #. Lebarhon : I put [] where it seems having mistakes #. Marja: you're right, in English English it is "its type", however, the Americans #. write "it's type". And you're right about the redundant part, too, I removed it #. And JohnR says the Americans are WRONG! :-)) #. 2012-04-19 Language proofreading done #. type: Content of: <section><mediaobject> #: en/ask_mntpoint_s.xml:27 msgid "" "<imageobject> <imagedata revision=\"1\" " "fileref=\"dx2-chooseMountpoints.png\" align=\"center\" format=\"PNG\" " "xml:id=\"chooseMountPoints-im1\"></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/ask_mntpoint_s.xml:33 msgid "" "Here you see the Linux partitions that have been found on your computer. If " "you don't agree with the <application>DrakX</application> suggestions, you " "can change the mount points." msgstr "" #. type: Content of: <section><note><para> #: en/ask_mntpoint_s.xml:38 msgid "" "If you change anything, make sure you still have a <literal>/</literal> " "(root) partition." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:44 msgid "" "Every partition is shown as follows: \"Device\" (\"Capacity\", \"Mount " "point\", \"Type\")." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:49 msgid "" "\"Device\", is made up of: \"hard drive\", [\"hard drive number\"(letter)], " "\"partition number\" (for example, \"sda5\")." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:55 msgid "" "If you have many partitions, you can choose many different mount points from " "the drop down menu, such as <literal>/</literal>, <literal>/home</literal> " "and <literal>/var</literal>. You can even make your own mount points, for " "instance <literal>/video</literal> for a partition where you want to store " "your films, or <literal>/cauldron-home</literal> for the " "<literal>/home</literal> partition of a cauldron install." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:65 msgid "" "For partitions you don't need to have access to, you can leave the mount " "point field blank." msgstr "" #. type: Content of: <section><warning><para> #: en/ask_mntpoint_s.xml:71 msgid "" "Choose <guibutton>Previous</guibutton> if you are not sure what to choose, " "and then tick <guilabel>Custom disk partitioning</guilabel>. In the screen " "that follows, you can click on a partition to see its type and size." msgstr "" #. type: Content of: <section><para> #: en/ask_mntpoint_s.xml:77 msgid "" "If you are sure the mount points are correct, click on " "<guibutton>Next</guibutton>, and choose whether you only want to format the " "partition(s) DrakX suggests, or more." msgstr "" #. type: Content of: <section><info><title> #: en/chooseDesktop.xml:5 msgid "Desktop Selection" msgstr "" #. type: Content of: <section><para> #: en/chooseDesktop.xml:11 msgid "" "Depending on your selection here, you may be offered further screens to fine " "tune your choice." msgstr "" #. type: Content of: <section><para> #: en/chooseDesktop.xml:13 msgid "" "After the selection step(s), you will see a slide show during package " "installation. The slide show can be disabled by pressing the " "<guilabel>Details</guilabel> button" msgstr "" #. type: Content of: <section><mediaobject> #: en/chooseDesktop.xml:20 msgid "" "<imageobject> <imagedata fileref=\"dx2-chooseDesktop.png\" align=\"center\" " "format=\"PNG\" ></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/chooseDesktop.xml:26 msgid "" "Choose whether you prefer to use the <application>KDE</application> or " "<application>Gnome</application> desktop environment. Both come with a full " "set of useful applications and tools. Tick <guilabel>Custom</guilabel> if " "you want to use neither or both, or if you want something other than the " "default software choices for these desktop environments. The " "<application>LXDE</application> desktop is lighter than the previous two, " "sporting less eye candy and fewer packages installed by default." msgstr "" #. type: Content of: <section><info><title> #: en/choosePackageGroups.xml:4 msgid "Package Group Selection" msgstr "" #. 2012-12-26 marja - exported this section from choosePackages.xml to start a new page #. type: Content of: <section><mediaobject> #: en/choosePackageGroups.xml:10 msgid "" "<imageobject> <imagedata fileref=\"dx2-choosePackageGroups.png\" " "align=\"center\" format=\"PNG\" ></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/choosePackageGroups.xml:16 msgid "" "Packages have been sorted into groups, to make choosing what you need on " "your system a lot easier. The groups are fairly self explanatory, however " "more information about the content of each is available in tool-tips which " "become visible as the mouse is hovered over them." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:23 msgid "Workstation." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:27 msgid "Server." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:31 msgid "Graphical Environment." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:35 msgid "" "Individual Package Selection: You can use this option to manually add or " "remove packages." msgstr "" #. type: Content of: <section><para> #: en/choosePackageGroups.xml:39 msgid "" "Read <xref linkend=\"minimal-install\"></xref> for instructions on how to do " "a minimal install." msgstr "" #. type: Content of: <section><info><title> #: en/choosePackagesTree.xml:4 msgid "Choose Individual Packages" msgstr "" #. 2012-12-26 marja - exported this section from choosePackages.xml to start a new page #. type: Content of: <section><mediaobject> #: en/choosePackagesTree.xml:11 msgid "" "<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" " "align=\"center\" format=\"PNG\" ></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/choosePackagesTree.xml:17 msgid "" "Here you can add or remove any extra packages to customise your " "installation." msgstr "" #. type: Content of: <section><para> #: en/choosePackagesTree.xml:20 msgid "" "After having made your choice, you can click on the <guibutton>floppy " "icon</guibutton> at the bottom of the page to save your choice of packages " "(saving to a USB key works, too). You can then use this file to install the " "same packages on another system, by pressing the same button during install " "and choosing to load it." msgstr "" #. type: Content of: <section><info><title> #: en/configureServices.xml:12 msgid "Configure your Services" msgstr "" #. 2012-12-25 marja - moved this section out of misc-params.xml #. 2013-05-05 marja - added screenshot #. type: Content of: <section><mediaobject> #: en/configureServices.xml:21 msgid "" "<imageobject> <imagedata revision=\"1\" " "fileref=\"dx2-configureServices.png\" align=\"center\" format=\"PNG\" " "xml:id=\"configureServices-im1\"></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/configureServices.xml:27 msgid "" "Here you can set which services should (not) start when you boot your " "system." msgstr "" #. type: Content of: <section><para> #: en/configureServices.xml:30 msgid "" "There are four groups, click on the triangle before a group to expand it and " "see all services in it." msgstr "" #. type: Content of: <section><para> #: en/configureServices.xml:34 msgid "The setting DrakX chose are usually good." msgstr "" #. type: Content of: <section><para> #: en/configureServices.xml:37 msgid "" "If you highlight a service, some information about it is shown in the info " "box below." msgstr "" #. type: Content of: <section><para> #: en/configureServices.xml:41 msgid "Only change things when you know very well what you are doing." msgstr "" #. type: Content of: <section><info><title> #: en/configureTimezoneUTC.xml:12 msgid "Configure your Timezone" msgstr "" #. 2012-12-25 marja - moved this part out of misc-params.xml #. 2013-05-05 marja - added screenshot #. type: Content of: <section><mediaobject> #: en/configureTimezoneUTC.xml:20 msgid "" "<imageobject> <imagedata revision=\"1\" " "fileref=\"dx2-configureTimezoneUTC.png\" align=\"center\" format=\"PNG\" " "xml:id=\"configureTimezoneUTC-im1\"></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/configureTimezoneUTC.xml:26 msgid "" "Choose your time zone by choosing your country or a city close to you in the " "same time zone." msgstr "" #. type: Content of: <section><para> #: en/configureTimezoneUTC.xml:30 msgid "" "In next screen you can choose to set your hardware clock to local time or to " "GMT, also known as UTC." msgstr "" #. type: Content of: <section><note><para> #: en/configureTimezoneUTC.xml:35 msgid "" "If you have more than one operating system on your computer, make sure they " "are all set to local time, or all to UTC/GMT." msgstr "" #. type: Content of: <section><info><title> #: en/configureX_card_list.xml:11 msgid "Choose an X Server (Configure your Graphic Card)" msgstr "" #. type: Content of: <section><mediaobject> #: en/configureX_card_list.xml:16 msgid "" "<imageobject> <imagedata revision=\"1\" align=\"center\" " "xml:id=\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" " "format=\"PNG\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:21 msgid "" "DrakX has a very comprehensive database of video cards and will usually " "correctly identify your video device." msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:24 msgid "" "If the installer has not correctly detected your graphic card and you know " "which one you have, you can select it from the tree by:" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_card_list.xml:27 en/configureX_monitor.xml:69 msgid "vendor" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_card_list.xml:31 msgid "then the name of your card" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_card_list.xml:35 msgid "and the type of card" msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:39 msgid "" "If you cannot find your card in the vendor lists (because it's not yet in " "the database or it's an older card) you may find a suitable driver in the " "Xorg category" msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:43 msgid "" "The Xorg listing provides more than 40 generic and open source video card " "drivers. If you still can't find a named driver for your card there is the " "option of using the vesa driver which provides basic capabilities." msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:48 msgid "" "Be aware that if you select an incompatible driver you may only have access " "to the Commandline Interface." msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:51 msgid "" "Some video card manufacturers provide proprietary drivers for Linux which " "may only be available in the Nonfree repository and in some cases only from " "the card manufacturers' websites." msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:55 msgid "" "The Nonfree repository needs to be explicitly enabled to access them. If " "you didn't select it previously, you should do this after your first reboot." msgstr "" #. type: Content of: <section><info><title> #: en/configureX_chooser.xml:4 msgid "Graphic Card and Monitor Configuration" msgstr "" #. Marja 2012-08-10, copied setupX.xml to this file and replaced all "setupX" in the code by "configureX_chooser", because this is the correct filename for this page #. type: Content of: <section><mediaobject> #: en/configureX_chooser.xml:11 msgid "" "<imageobject> <imagedata revision=\"1\" " "fileref=\"dx2-configureX_chooser.png\" align=\"center\" format=\"PNG\" " "xml:id=\"configureX_chooser-im1\"> </imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/configureX_chooser.xml:18 msgid "" "No matter which graphical environment (also known as desktop environment) " "you chose for this install of <application>Mageia</application>, they are " "all based on a graphical user interface system called <acronym>X Window " "System</acronym>, or simply <acronym>X</acronym>. So in order for " "<acronym>KDE</acronym>, <acronym>Gnome</acronym>, <acronym>LXDE</acronym> or " "any other graphical environment to work well, the following " "<acronym>X</acronym> settings need to be correct. Choose the correct " "settings if you can see that <application>DrakX</application> didn't make a " "choice, or if you think the choice is incorrect." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:31 msgid "" "<emphasis><guibutton>Graphic card</guibutton></emphasis>: Choose your card " "from the list if needed." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:37 msgid "" "<emphasis><guibutton>Monitor</guibutton></emphasis>: You can choose " "<guilabel>Plug'n Play</guilabel> when applicable, or choose your monitor " "from the <guilabel>Vendor</guilabel> or <guilabel>Generic</guilabel> " "list. Choose <guilabel>Custom</guilabel> if you prefer to manually set the " "horizontal and vertical refresh rates of your monitor." msgstr "" #. type: Content of: <section><itemizedlist><listitem><warning><para> #: en/configureX_chooser.xml:45 msgid "Incorrect refresh rates may damage your monitor" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:51 msgid "" "<emphasis><guibutton>Resolution</guibutton></emphasis>: Set the desired " "resolution and color depth of your monitor here." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:56 msgid "" "<emphasis><guibutton>Test</guibutton></emphasis>: The test button does not " "always appear during install. If the button is there, you can control your " "settings by pressing it. If you see a question asking you whether your " "settings are correct, you can answer \"yes\", and the settings will be " "kept. If you don't see anything, you'll return to the configuration screen " "and be able to reconfigure everything until the test is good. <emphasis>Make " "sure your settings are on the safe side if the test button isn't " "available</emphasis>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:67 msgid "" "<emphasis><guibutton>Options</guibutton></emphasis>: Here you can choose to " "enable or disable various options." msgstr "" #. type: Content of: <section><info><title> #: en/configureX_monitor.xml:18 msgid "Choosing your Monitor" msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:21 msgid "" "DrakX has a very comprehensive database of monitors and will usually " "correctly identify yours." msgstr "" #. type: Content of: <section><warning><para> #: en/configureX_monitor.xml:26 msgid "" "<emphasis>Selecting a monitor with different characteristics could damage " "your monitor or video hardware. Please don't try something without knowing " "what you are doing.</emphasis> If in doubt you should consult your monitor " "documentation" msgstr "" #. type: Content of: <section><mediaobject> #: en/configureX_monitor.xml:34 msgid "" "<imageobject> <imagedata align=\"center\" " "fileref=\"dx2-configureX_monitor.png\" format=\"PNG\" revision=\"1\" " "xml:id=\"configureX_monitor-im1\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:42 msgid "<emphasis>Custom</emphasis>" msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:44 msgid "" "This option allows you to set two critical parameters, the vertical refresh " "rate and the horizontal sync rate. Vertical refresh determines how often the " "screen is refreshed and horizontal sync is the rate at which scan lines are " "displayed." msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:49 msgid "" "It is <emphasis>VERY IMPORTANT</emphasis> that you do not specify a monitor " "type with a sync range that is beyond the capabilities of your monitor: you " "may damage your monitor. If in doubt, choose a conservative setting and " "consult your monitor documentation." msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:55 msgid "<emphasis>Plug 'n Play</emphasis>" msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:58 msgid "" "This is the default option and tries to determine the monitor type from the " "monitor database." msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:63 msgid "<emphasis>Vendor</emphasis>" msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:65 msgid "" "If the installer has not correctly detected your monitor and you know which " "one you have, you can select it from the tree by selecting:" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_monitor.xml:73 msgid "the monitor manufacturers name" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_monitor.xml:77 msgid "the monitor description" msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:82 msgid "<emphasis>Generic</emphasis>" msgstr "" #. type: Content of: <section><para> #: en/configureX_monitor.xml:84 msgid "" "selecting this group displays nearly 30 display configurations such as " "1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is " "often a good monitor selection group if you need to use the Vesa card driver " "when your video hardware cannot be determined automatically. Once again it " "may be wise to be conservative in your selections." msgstr "" #. type: Content of: <section><info><title> #: en/diskdrake.xml:19 msgid "Custom disk partitioning with DiskDrake" msgstr "" #. type: Content of: <section><mediaobject> #: en/diskdrake.xml:26 msgid "" "<imageobject> <imagedata fileref=\"dx2-diskdrake.png\" " "align=\"center\"></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><warning><para> #: en/diskdrake.xml:33 msgid "" "If you wish to use encryption on your <literal>/</literal> partition you " "must ensure that you have a separate <literal>/boot</literal> partition. The " "encryption option for the <literal>/boot</literal> partition must NOT be " "set, otherwise your system will be unbootable." msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:39 msgid "" "Adjust the layout of your disk(s) here. You can remove or create partitions, " "change the filesystem of a partition or change its size and even view what " "is in them before you start." msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:42 msgid "" "There is a tab for every detected hard disk or other storage device, like an " "USB key. For example sda, sdb and sdc if there are three of them." msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:45 msgid "" "Push <guibutton>Clear all</guibutton> to wipe all partitions on the selected " "storage device" msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:47 msgid "" "For all other actions: click on the desired partition first. Then view it, " "or choose a filesystem and a mount point, resize it or wipe it." msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:49 msgid "Continue until you adjusted everything to your wishes." msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:51 msgid "Click <guibutton>Done</guibutton> when you're ready." msgstr "" #. type: Content of: <section><info><title> #: en/doPartitionDisks.xml:25 msgid "Partitioning" msgstr "" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:28 msgid "" "In this screen you can see the content of your hard drive(s) and see the " "solutions the DrakX partitioning wizard found for where to install " "<application>Mageia</application>." msgstr "" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:33 msgid "" "The options available from the list below will vary depending on your " "particular hard drive(s) layout and content." msgstr "" #. type: Content of: <section><mediaobject> #: en/doPartitionDisks.xml:38 msgid "" "<imageobject> <imagedata align=\"center\" " "fileref=\"dx2-doPartitionDisks.png\" /> </imageobject>" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:45 msgid "Use Existing Partitions" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:48 msgid "" "If this option is available, then existing Linux compatible partitions have " "been found and may be used for the installation." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:54 msgid "Use Free Space" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:56 msgid "" "If you have unused space on your hard drive then this option will use it for " "your new Mageia installation." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:62 msgid "Use Free Space on a Windows Partition" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:65 msgid "" "If you have unused space on an existing Windows partition, the installer may " "offer to use it." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:69 msgid "" "This can be a useful way of making room for your new Mageia installation, " "but is a risky operation so you should make sure you have backed up all " "important files!" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:74 msgid "" "Note that this involves shrinking the size of the Windows partition. The " "partition must be \"clean\", meaning that Windows must have closed down " "correctly the last time it was used. It must also have been defragmented, " "although this is not a guarantee that all files in the partition have been " "moved out of the area that is about to be used. It is highly recommended to " "back up your personal files." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:84 msgid "Erase and use Entire Disk." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:87 msgid "This option will use the complete drive for Mageia." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:90 msgid "Note! This will erase ALL data on the selected hard drive. Take care!" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:93 msgid "" "If you intend to use part of the disk for something else, or you already " "have data on the drive that you are not prepared to lose, then do not use " "this option." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:100 msgid "Custom" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:102 msgid "" "This gives you complete control over the placing of the installation on your " "hard drive(s)." msgstr "" #. type: Content of: <section><warning><para> #: en/doPartitionDisks.xml:109 msgid "" "Some newer drives are now using 4096 byte logical sectors, instead of the " "previous standard of 512 byte logical sectors. Due to lack of available " "hardware, the partitioning tool used in the installer has not been tested " "with such a drive. Also some ssd drives now use an erase block size over 1 " "MB. We suggest to pre-partition the drive, using an alternative partitioning " "tool like gparted, if you own such a device, and to use the following " "settings:" msgstr "" #. type: Content of: <section><warning><para> #: en/doPartitionDisks.xml:117 msgid "\"Align to\" \"MiB\"" msgstr "" #. type: Content of: <section><warning><para> #: en/doPartitionDisks.xml:119 msgid "\"Free space preceding (MiB)\" \"2\"" msgstr "" #. type: Content of: <section><warning><para> #: en/doPartitionDisks.xml:121 msgid "Also make sure all partitions are created with an even number of megabytes." msgstr "" #. type: Content of: <article><info><title> #: en/DrakX.xml:3 msgid "Installation with DrakX" msgstr "" #. type: Content of: <article><info><cover><para><note> #: en/DrakX.xml:6 msgid "<note>" msgstr "" #. type: Content of: <article><info><cover><para><note><para> #: en/DrakX.xml:7 msgid "" "No one will see all the installer screens that you see in this manual. Which " "screens you will see, depends on your hardware and the choices you make " "while installing." msgstr "" #. type: Content of: <article><info><cover><para> #: en/DrakX.xml:10 msgid "</note>" msgstr "" #. type: Content of: <article><info><cover><para> #: en/DrakX.xml:12 msgid "" "The texts and screenshots in this manual are available under the CC BY-SA " "3.0 license <link " "ns6:href=\"http://creativecommons.org/licenses/by-sa/3.0/\">http://creativecommons.org/licenses/by-sa/3.0/</link>." msgstr "" #. type: Content of: <article><info><cover><para> #: en/DrakX.xml:16 msgid "" "This manual was produced with the help of the <link " "ns6:href=\"http://www.calenco.com\">Calenco CMS</link> developed by <link " "ns6:href=\"http://www.neodoc.biz\">NeoDoc</link>." msgstr "" #. type: Content of: <article><info><cover><para> #: en/DrakX.xml:18 msgid "" "It was written by volunteers in their free time. Please contact <link " "ns6:href=\"https://wiki.mageia.org/en/Documentation_team\">Documentation " "Team</link>, if you would like to help improve this manual." msgstr "" #. type: Content of: <section><info><title> #: en/exitInstall.xml:4 msgid "Congratulations" msgstr "" #. Started by marja on 2012 03 29 #. NEEDS TO BE WRITTEN AND THEN REVIEWED! #. marja - 2012-04-24 added screenshot and text #. same day, added "s" to "sytems" #. type: Content of: <section><mediaobject> #: en/exitInstall.xml:14 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-exitInstall.png\" " "format=\"PNG\" align=\"center\" xml:id=\"exitInstall-im1\"> </imagedata> " "</imageobject>" msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:21 msgid "" "You have finished installing and configuring " "<application>Mageia</application> and it is now safe to remove the " "installation medium and reboot your computer." msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:25 msgid "" "After reboot, in the bootloader screen, you can choose between the operating " "systems on your computer (if you have more than one)." msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:28 msgid "" "If you didn't adjust the settings for the bootloader, your Mageia install " "will be automatically selected and started." msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:31 msgid "Enjoy!" msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:33 msgid "" "Visit www.mageia.org if you have any questions or want to contribute to " "Mageia" msgstr "" #. type: Content of: <section><info><title> #: en/formatPartitions.xml:4 msgid "Formatting" msgstr "" #. Made by marja on 2012 03 29 #. NEEDS TO BE REVIEWED! #. marja 2012-04-24 added screenshot #. marja 2012-04-24 added emphasis tags in formatPartitions-pa1 #. type: Content of: <section><mediaobject> #: en/formatPartitions.xml:18 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-formatPartitions.png\" " "format=\"PNG\" align=\"center\" xml:id=\"formatPartitions-im1\"> " "</imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/formatPartitions.xml:25 msgid "" "Here you can choose which partition(s) you wish to format. Any data on " "partitions <emphasis>not</emphasis> marked for formatting will be saved." msgstr "" #. type: Content of: <section><para> #: en/formatPartitions.xml:29 msgid "Usually at least the partitions DrakX selected, need to be formatted" msgstr "" #. type: Content of: <section><para> #: en/formatPartitions.xml:32 msgid "" "Click on <guibutton>Advanced</guibutton> to choose partitions you want to " "check for so called <emphasis>bad blocks</emphasis>" msgstr "" #. type: Content of: <section><tip><para> #: en/formatPartitions.xml:37 msgid "" "If you're not sure you have made the right choice, you can click on " "<guibutton>Previous</guibutton>, again on <guibutton>Previous</guibutton> " "and then on <guibutton>Custom</guibutton> to get back to the main screen. " "In that screen you can choose to view what is in your partitions." msgstr "" #. type: Content of: <section><para> #: en/formatPartitions.xml:44 msgid "" "When you are confident about the selection, click on " "<guibutton>Next</guibutton> to continue." msgstr "" #. type: Content of: <section><info><title> #: en/installer.xml:18 msgid "DrakX, the Mageia Installer" msgstr "" #. type: Content of: <section><para> #: en/installer.xml:21 msgid "" "Whether you are new to GNU-Linux or an experienced user, the Mageia " "Installer is designed to help make your installation or upgrade as easy as " "possible." msgstr "" #. type: Content of: <section><para> #: en/installer.xml:29 msgid "" "The initial menu screen has various options, however the default one will " "start the installer, which will normally be all that you will need." msgstr "" #. type: Content of: <section><figure><info><title> #: en/installer.xml:35 msgid "Installation Welcome Screen" msgstr "" #. type: Content of: <section><figure><mediaobject> #: en/installer.xml:39 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"../dx-welcome.png\" " "align=\"center\" format=\"PNG\" xml:id=\"BId-drakx-intro-im1\"> </imagedata> " "</imageobject>" msgstr "" #. type: Content of: <section><section><figure> #: en/installer.xml:34 en/installer.xml:90 msgid "" "<placeholder type=\"info\" id=\"0\"/> <placeholder type=\"mediaobject\" " "id=\"1\"/>" msgstr "" #. type: Content of: <section><para> #: en/installer.xml:47 msgid "" "If there are problems during install, then it may be necessary to use " "special installation options, see <xref " "linkend=\"installationOptions\"></xref>." msgstr "" #. type: Content of: <section><section><info><title> #: en/installer.xml:52 msgid "The installation steps" msgstr "" #. type: Content of: <section><section><para> #: en/installer.xml:55 msgid "" "The install process is divided into a number of steps, which can be followed " "on the side panel of the screen." msgstr "" #. type: Content of: <section><section><para> #: en/installer.xml:58 msgid "" "Each step has one or more screens which may also have " "<guibutton>Advanced</guibutton> buttons with extra, less commonly required, " "options." msgstr "" #. type: Content of: <section><section><para> #: en/installer.xml:62 msgid "" "Most screens have <guibutton>Help</guibutton> buttons which give further " "explanations about the current step." msgstr "" #. type: Content of: <section><section><note><para> #: en/installer.xml:66 msgid "" "If somewhere during install you decide to stop the installation, it is " "possible to reboot, but please think twice before you do this. Once a " "partition has been formatted or updates have started to be installed, your " "computer is no longer in the same state and rebooting it could very well " "leave you with an unusable system. If in spite of this you are very sure " "rebooting is what you want, go to a text terminal by pressing the three keys " "<guibutton>Alt Ctrl F2</guibutton> at the same time. After that, press " "<guibutton>Alt Ctrl Delete</guibutton> simultaneously to reboot." msgstr "" #. type: Content of: <section><section><info><title> #: en/installer.xml:80 msgid "Installation options" msgstr "" #. type: Content of: <section><section><para> #: en/installer.xml:83 msgid "" "If the installation fails then it may be necessary to try again by using one " "of the extra options available by hitting the <guibutton>F1 " "(Help)</guibutton> key see <xref linkend=\"dx-welcome\"></xref>" msgstr "" #. type: Content of: <section><section><para> #: en/installer.xml:87 msgid "This will open the following text based help." msgstr "" #. type: Content of: <section><section><figure><info><title> #: en/installer.xml:91 msgid "Installation Help Screen" msgstr "" #. type: Content of: <section><section><figure><mediaobject> #: en/installer.xml:96 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"../dx-help.png\" " "align=\"center\" format=\"PNG\" xml:id=\"installer-im2\"></imagedata> " "</imageobject>" msgstr "" #. type: Content of: <section><section><section><info><title> #: en/installer.xml:105 msgid "Installation Problems and Possible Solutions" msgstr "" #. type: Content of: <section><section><section><section><info><title> #: en/installer.xml:111 msgid "No Graphical Interface" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/installer.xml:116 msgid "" "After the initial screen you did not reach the language selection " "screen. This can happen with some graphic cards and older systems. Try using " "low resolution by typing <code>vgalo</code> at the prompt." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/installer.xml:123 msgid "" "If the hardware is very old, a graphical installation may not be " "possible. In this case it is worth trying a text mode installation. To use " "this hit ESC at the first welcome screen and confirm with ENTER. You will be " "presented with a black screen with the word \"boot:\". Type \"text\" and hit " "ENTER. Now continue with the installation in text mode.<emphasis></emphasis>" msgstr "" #. type: Content of: <section><section><section><section><info><title> #: en/installer.xml:135 msgid "The Install Freezes" msgstr "" #. type: Content of: <section><section><section><section><para> #: en/installer.xml:138 msgid "" "If the system appeared to freeze during the installation, this may be a " "problem with hardware detection. In this case the automatic detection of " "hardware may be bypassed and dealt with later. To try this, type " "<code>noauto</code> at the prompt. This option may also be combined with " "other options as necessary." msgstr "" #. type: Content of: <section><section><section><section><info><title> #: en/installer.xml:147 msgid "Kernel Options" msgstr "" #. type: Content of: <section><section><section><section><para> #: en/installer.xml:150 msgid "" "These will rarely be needed, but in some cases the hardware may report the " "available RAM incorrectly. To specify this manually, you can use the " "<code>mem=xxxM</code> parameter, where xxx is the correct amount of " "RAM. e.g. <code>mem=256M</code> would specify 256MB of RAM." msgstr "" #. type: Content of: <section><info><title> #: en/installUpdates.xml:3 msgid "Updates" msgstr "" #. Made by marja on 2012 03 30 #. NEEDS TO BE REVIEWED! #. marja 20120418 removed xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg"" from section tag, trying to restore correct html filename #. marja, 2012-04-24 added screenshot #. type: Content of: <section><mediaobject> #: en/installUpdates.xml:13 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png\" " "format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></imagedata> " "</imageobject>" msgstr "" #. type: Content of: <section><para> #: en/installUpdates.xml:19 msgid "" "Since this version of <application>Mageia</application> was released, some " "packages will have been updated or improved." msgstr "" #. type: Content of: <section><para> #: en/installUpdates.xml:23 msgid "" "Choose <guilabel>yes</guilabel> if you wish to download and install them, " "select <guilabel>no</guilabel> if you don't want to do this now, or if you " "aren't connected to the Internet" msgstr "" #. type: Content of: <section><para> #: en/installUpdates.xml:28 msgid "Then press <guibutton>Next</guibutton> to continue" msgstr "" #. type: Content of: <section><info><title> #: en/media_selection.xml:3 msgid "Media Selection (Nonfree)" msgstr "" #. papoteur 2013-04-11 - created #. marja 2013-04-16 added screenshot + made title longer (because it was the same as for add_supplemental_media) #. marja 2013-04-16 s/in/during/ as suggested by Tristan Campbell #. marja 2013-04-17 s/xml:id="media-selection"/xml:id="media_selection"/ (html filename was wrong) #. type: Content of: <section><mediaobject> #: en/media_selection.xml:12 msgid "" "<imageobject> <imagedata align=\"center\" " "fileref=\"dx2-media_selection.png\" format=\"PNG\" revision=\"1\" " "xml:id=\"media_selection-im1\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/media_selection.xml:18 msgid "" "Here you have the list of available repositories. Not all repositories are " "available, according to which media you use for installing. The repositories " "selection determines which packages will be available for selection during " "the next steps." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:25 msgid "" "The <emphasis>Core</emphasis> repository cannot be disabled as it contains " "the base of the distribution." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:30 msgid "" "The <emphasis>Nonfree</emphasis> repository includes packages that are " "free-of-charge, i.e. Mageia may redistribute them, but they contain " "closed-source software (hence the name - Nonfree). For example this " "repository includes nVidia and ATI graphics card proprietary drivers, " "firmware for various WiFi cards, etc." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:38 msgid "" "The <emphasis>Tainted</emphasis> repository includes packages released under " "a free license. The main criteria for placing packages in this repository is " "that they may infringe patents and copyright laws in some countries, " "e.g. Multimedia codecs needed to play various audio/video files; packages " "needed to play commercial video DVD, etc." msgstr "" #. type: Content of: <section><info><title> #: en/minimal-install.xml:3 msgid "Minimal Install" msgstr "" #. type: Content of: <section><para> #: en/minimal-install.xml:9 msgid "" "You can choose a Minimal Installation by de-selecting everything in the " "Package Group Selection screen, see <xref " "linkend=\"choosePackageGroups\"></xref>." msgstr "" #. type: Content of: <section><para> #: en/minimal-install.xml:10 msgid "" "Minimal Installation is intended for those with specific uses in mind for " "their <application>Mageia</application>, such as a server or a specialised " "workstation. You will probably use this option combined with Manual Package " "Selection, see <xref linkend=\"choosePackagesTree\"></xref>." msgstr "" #. type: Content of: <section><para> #: en/minimal-install.xml:14 msgid "" "If you choose this installation class, then the related screen will offer " "you a few useful extras to install, such as documentation and X." msgstr "" #. type: Content of: <section><mediaobject> #: en/minimal-install.xml:19 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png\" " "align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></imagedata> " "</imageobject>" msgstr "" #. type: Content of: <section><info><title> #: en/misc-params.xml:3 msgid "Summary of miscellaneous parameters" msgstr "" #. Started by marja on 2012 03 31 #. NEEDS TO BE WRITTEN AND REVIEWED! #. marja - 2012 04 15 added some text, not much, unfortunately :( #. marja 2012-04-24 added screenshots #. JohnR 2012-04-25 Added text as requested by Psec :-) #. marja 2012-04-24 added 2 links to other help pages #. marja 2012-04-24 added some text in the drakxid-configureServices and #. the drakxid-miscellaneous section #. marja 2012-04-24 corrected "Magaia" in the last paragraph #. marja 2012-04-24 corrected para xml:id number in the last paragraph #. 2012-05-01 marja - added You-Cheng Hsieh's section about IBus etc. #. 2012-08-09 marja - replaced linkend="setupBootloaderBeginner" by linkend="setupBootloader" #. 2012-12-25 marja - moved configureTimezoneUTC, selectCountry, configureServices and SecurityLevel out to separate files #. type: Content of: <section><mediaobject> #: en/misc-params.xml:33 msgid "" "<imageobject> <imagedata fileref=\"dx2-summary.png\" revision=\"1\" " "align=\"center\" format=\"PNG\" xml:id=\"summary-im1\" /> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/misc-params.xml:38 msgid "" "DrakX made smart choices for the configuration of your system depending on " "the choices you made and on the hardware DrakX detected. You can check the " "settings here and change them if you want after pressing " "<guibutton>Configure</guibutton>." msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:45 msgid "System parameters" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:50 msgid "<guilabel>Timezone</guilabel>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:52 msgid "" "DrakX selected a time zone for you, depending on your preferred " "language. You can change it if needed. See also <xref " "linkend=\"configureTimezoneUTC\"/>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:58 msgid "<guilabel>Country / Region</guilabel>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:61 msgid "" "If you are not in the selected country, it is very important that you " "correct the setting. See <xref linkend=\"selectCountry\"/>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:67 msgid "<guilabel>Bootloader</guilabel>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:69 msgid "DrakX has made good choices for the bootloader setting." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:72 msgid "Do not change anything, unless you know how to configure Grub and/or Lilo" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:75 msgid "For more information, see <xref linkend=\"setupBootloader\"/>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:80 msgid "<guilabel>User management</guilabel>" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:83 msgid "" "You can add extra users here. They will each get their own " "<literal>/home</literal> directories." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:89 msgid "<guilabel>Services</guilabel>:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:91 msgid "" "System services refer to those small programs which run the background " "(daemons). This tool allows you to enable or disable certain tasks." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:95 msgid "" "You should check carefully before changing anything here - a mistake may " "prevent your computer from operating correctly." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:99 msgid "For more information, see <xref linkend=\"configureServices\"/>" msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:106 msgid "Hardware parameters" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:111 msgid "<guilabel>Keyboard</guilabel>:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:113 msgid "" "This is where you setup or change your keyboard layout which will depend on " "your location, language or type of keyboard." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:119 msgid "<guilabel>Mouse</guilabel>:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:121 msgid "" "Here you can add or configure other pointing devices, tablets, trackballs " "etc." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:126 msgid "<guilabel>Sound card</guilabel>:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:129 msgid "" "This section allows you to fine tune your sound card. In most cases the " "options selected will work with your computer." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:135 msgid "<guilabel>Graphical interface</guilabel>:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:138 msgid "This section allows you to configure your graphic card(s) and displays." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:141 msgid "For more information, see <xref linkend=\"configureX_chooser\"/>." msgstr "" #. type: Content of: <section><section><mediaobject> #: en/misc-params.xml:147 msgid "" "<imageobject> <imagedata xml:id=\"summaryBottom-im1\" revision=\"1\" " "align=\"center\" format=\"PNG\" fileref=\"dx2-summaryBottom.png\" /> " "</imageobject>" msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:155 msgid "Network and Internet parameters" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:161 msgid "<guilabel>Network</guilabel>:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:163 msgid "" "You can configure your network here, but for network cards with non-free " "drivers it is better to do that after reboot, in the <application>Mageia " "Control Center</application>, if you have not yet enabled the Nonfree media " "repositories." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><warning><para> #: en/misc-params.xml:170 msgid "" "When you add a network card, do not forget to set your firewall to watch " "that interface as well." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:177 msgid "<guilabel>Proxies</guilabel>:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:179 msgid "" "A Proxy Server acts as an intermediary between your computer and the wider " "internet. This section allows you to configure your computer to utilize a " "proxy service." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:184 msgid "" "You may need to consult your systems administrator to get the parameters you " "need to enter here" msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:193 msgid "Security" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:198 msgid "<guilabel>Security Level</guilabel>:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:201 msgid "" "Here you set the Security level for your computer, in most cases the default " "setting (Standard) is adequate for general use." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:205 msgid "Check the option which best suits your usage." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:210 msgid "<guilabel>Firewall</guilabel>:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:212 msgid "" "A firewall is intended to be a barrier between your important data and the " "rascals out there on the internet who would compromise or steal it." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:216 msgid "" "Select the services that you wish to have access to your system. Your " "selections will depend on what you use your computer for." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><warning><para> #: en/misc-params.xml:221 msgid "Bear in mind that allowing everything (no firewall) may be very risky." msgstr "" #. type: Content of: <section><info><title> #: en/securityLevel.xml:12 msgid "Security Level" msgstr "" #. 2012-12-25 marja - moved this part out of misc-params.xml" #. 2013-05-05 marja - added screenshot #. type: Content of: <section><mediaobject> #: en/securityLevel.xml:19 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" " "align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> " "</imageobject>" msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:24 msgid "You can adjust your security level here." msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:27 msgid "Leave the default settings as they are, if you don't know what to choose." msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:30 msgid "" "After install, it will always be possible to adjust your security settings " "in the <guilabel>Security</guilabel> part of the Mageia Control Center." msgstr "" #. type: Content of: <section><info><title> #: en/selectCountry.xml:13 msgid "Select your Country / Region" msgstr "" #. 2012-12-25 marja - moved this section out of misc-params #. 2013-05-05 marja - added screenshot #. type: Content of: <section><mediaobject> #: en/selectCountry.xml:21 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-selectCountry.png\" " "align=\"center\" format=\"PNG\" xml:id=\"selectCountry-im1\"></imagedata> " "</imageobject>" msgstr "" #. type: Content of: <section><para> #: en/selectCountry.xml:27 msgid "" "Select your country or region. This is important for all kinds of settings, " "like the currency and wireless regulatory domain. Setting the wrong country " "can lead to not being able to use a Wireless network." msgstr "" #. type: Content of: <section><para> #: en/selectCountry.xml:32 msgid "" "If your country isn't in the list, click the <guilabel>Other " "Countries</guilabel> button and choose your country / region there." msgstr "" #. type: Content of: <section><note><para> #: en/selectCountry.xml:37 msgid "" "If your country is only in the <guilabel>Other Countries</guilabel> list, " "after clicking <guibutton>OK</guibutton> it may seem a country from the " "first list was chosen. Please ignore this, DrakX will follow your real " "choice." msgstr "" #. type: Content of: <section><section><info><title> #: en/selectCountry.xml:46 msgid "Input method" msgstr "" #. type: Content of: <section><section><para> #: en/selectCountry.xml:49 msgid "" "In the <guilabel>Other Countries</guilabel> screen you can also select an " "input method (at the bottom of the list). Input methods allow users to input " "multilingual characters (Chinese, Japanese, Korean, etc). IBus is the " "default input method in Mageia DVDs, Africa/India and Asia/no-India " "Live-CDs. For Asian and African locales, IBus will be set as default input " "method so users should not need to configure it manually. Other input " "methods(SCIM, GCIN, HIME, etc) also provide similar functions and can be " "installed if you added HTTP/FTP media before package selection." msgstr "" #. type: Content of: <section><section><note><para> #: en/selectCountry.xml:61 msgid "" "If you missed the input method setup during installation, you can access it " "after you boot your installed system via \"Configure your Computer\" -> " "\"System\", or by running localedrake as root." msgstr "" #. type: Content of: <section><info><title> #: en/selectInstallClass.xml:23 msgid "Install or Upgrade" msgstr "" #. type: Content of: <section><mediaobject> #: en/selectInstallClass.xml:27 msgid "" "<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" " "align=\"center\" format=\"PNG\"></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:34 msgid "Install" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:36 msgid "Use this option for a fresh <application>Mageia</application> installation." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:41 msgid "Upgrade" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:43 msgid "" "If you have one or more <application>Mageia 2</application> installations on " "your system, the installer will allow you to upgrade one of them to the " "latest release." msgstr "" #. type: Content of: <section><note><para> #: en/selectInstallClass.xml:49 msgid "" "If during install you decide to stop the installation, it is possible to " "reboot, but please think twice before you do this. Once a partition has been " "formatted or updates have started to be installed, your computer isn't in " "the same state anymore and rebooting it could very well leave you with an " "unusable system. If in spite of that you are very sure rebooting is what you " "want, go to a text terminal by pressing the three keys <guilabel>Alt Ctrl " "F2</guilabel> at the same time. After that, press <guilabel>Alt Ctrl " "Delete</guilabel> simultaneously to reboot." msgstr "" #. type: Content of: <section><tip><para> #: en/selectInstallClass.xml:60 msgid "" "If you have discovered that you forgot to select an additional language, you " "can return from the \"Install or Upgrade\" screen to the language choice " "screen by pressing <guilabel>Alt Ctrl Home</guilabel>. Do " "<emphasis>not</emphasis> do this later in the install." msgstr "" #. type: Content of: <section><info><title> #: en/selectKeyboard.xml:14 msgid "Keyboard" msgstr "" #. type: Content of: <section><para> #: en/selectKeyboard.xml:17 msgid "" "DrakX selects an appropriate keyboard for your language. If no suitable " "keyboard is found it will default to a US keyboard layout." msgstr "" #. type: Content of: <section><mediaobject> #: en/selectKeyboard.xml:22 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png\" " "/> </imageobject>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:30 msgid "" "Make sure that the selection is correct or choose another keyboard " "layout. If you don't know which layout your keyboard has, look in the " "specifications that came with your system, or ask the computer vendor. There " "may even be a label on the keyboard that identifies the layout. You can also " "look here: <link " "xlink:href=\"http://en.wikipedia.org/wiki/Keyboard_layout\">en.wikipedia.org/wiki/Keyboard_layout</link>" msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:40 msgid "" "If your keyboard isn't in the list shown, click on " "<guibutton>More</guibutton> to get a full list, and select your keyboard " "there." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para><warning><para> #: en/selectKeyboard.xml:45 msgid "" "After choosing a keyboard from the <guibutton>More</guibutton> dialog, " "you'll return to the first keyboard choice dialog and it will seem as though " "a keyboard from that screen was chosen. You can safely ignore this anomaly " "and continue the installation: Your keyboard is the one you chose from the " "full list." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:55 msgid "" "If you choose a keyboard based on non-Latin characters, you will see an " "extra dialog screen asking how you would prefer to switch between the Latin " "and non-Latin keyboard layouts" msgstr "" #. type: Content of: <section><info><title> #: en/selectLanguage.xml:23 msgid "Please choose a language to use" msgstr "" #. type: Content of: <section><para> #: en/selectLanguage.xml:26 msgid "" "Select your preferred language, by first expanding the list for your " "continent. <application>Mageia</application> will use this selection during " "the installation and for your installed system." msgstr "" #. type: Content of: <section><para> #: en/selectLanguage.xml:30 msgid "" "If it is likely that you will require several languages installed on your " "system, for yourself or other users, then you should use the " "<guibutton>Multiple languages</guibutton> button to add them now. It will be " "difficult to add extra language support after installation." msgstr "" #. type: Content of: <section><mediaobject> #: en/selectLanguage.xml:36 msgid "" "<imageobject> <imagedata fileref=\"dx2-selectLanguage.png\" align=\"center\" " "format=\"PNG\" > </imagedata> </imageobject>" msgstr "" #. type: Content of: <section><warning><para> #: en/selectLanguage.xml:44 msgid "" "Even if you choose more than one language, you must first choose one of them " "as your preferred language in the first language screen. It will also be " "marked as chosen in the multiple languages screen ." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:51 msgid "" "If your keyboard language is not the same as your preferred language, then " "it is advisable to install the language of your keyboard as well." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:57 msgid "" "Mageia uses UTF-8 (Unicode) support by default. This may be disabled in the " "\"multiple languages\" screen if you know that it is inappropriate for your " "language. Disabling UTF-8 applies to all installed languages." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:64 msgid "" "You can change the language of your system after installation in the Mageia " "Control Center -> System -> Manage localization for your system." msgstr "" #. type: Content of: <section><info><title> #: en/selectMouse.xml:4 msgid "Select mouse" msgstr "" #. Made by marja on 2012 04 11 #. NEEDS TO BE REVIEWED! #. adding some "real" text now that we know the page shows up in the right place #. marja 2012-04-24 adding screenshot #. type: Content of: <section><mediaobject> #: en/selectMouse.xml:16 msgid "" "<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" " "format=\"PNG\" > </imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/selectMouse.xml:23 msgid "" "If you are not happy with how your mouse responds, you can select a " "different one here." msgstr "" #. type: Content of: <section><para> #: en/selectMouse.xml:25 msgid "" "Usually, <guilabel>Universal</guilabel> - <guilabel>Any PS/2 and USB " "mice</guilabel> is a good choice." msgstr "" #. type: Content of: <section><para> #: en/selectMouse.xml:27 msgid "" "Select <guilabel>Universal</guilabel> - <guilabel>Force evdev</guilabel> to " "configure the buttons that do not work on a mouse with six or more buttons." msgstr "" #. type: Content of: <section><info><title> #: en/setupBootloaderAddEntry.xml:5 msgid "Add or Modify a Boot Menu Entry" msgstr "" #. type: Content of: <section><mediaobject> #: en/setupBootloaderAddEntry.xml:10 msgid "" "<imageobject> <imagedata revision=\"1\" " "fileref=\"dx2-bootloaderConfiguration.png\" format=\"PNG\" align=\"center\" " "xml:id=\"bootloaderConfiguration-im1\"></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/setupBootloaderAddEntry.xml:17 msgid "" "You can add an entry or modify the one you select first, by pressing the " "relevant button in the <emphasis>Bootloader Configuration</emphasis> screen " "and editing the screen that pops up on top of it." msgstr "" #. type: Content of: <section><mediaobject> #: en/setupBootloaderAddEntry.xml:21 msgid "" "<imageobject> <imagedata revision=\"1\" " "fileref=\"dx2-setupBootloaderAddEntry.png\" format=\"PNG\" align=\"center\" " "xml:id=\"setupBootloaderAddEntry-im1\"></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/setupBootloaderAddEntry.xml:26 msgid "" "Some things that can be done without any risk, are changing the label of an " "entry and ticking the box to make an entry the default one." msgstr "" #. type: Content of: <section><para> #: en/setupBootloaderAddEntry.xml:27 msgid "You can add the proper version number of an entry, or rename it completely." msgstr "" #. type: Content of: <section><para> #: en/setupBootloaderAddEntry.xml:28 msgid "" "The default entry is the one the systems boots into if you don't make a " "choice while booting up." msgstr "" #. type: Content of: <section><warning><para> #: en/setupBootloaderAddEntry.xml:29 msgid "" "Editing other things can leave you with an unbootable system. Please don't " "just try something without knowing what you are doing." msgstr "" #. type: Content of: <section><info><title> #: en/setupBootloader.xml:3 msgid "Bootloader main options" msgstr "" #. 2012-08-12 Copied this page, setupBootloader.xml, from setupBootloaderBeginner.xml and REMOVED the string "Beginner" everywhere, except in this sentence. # #. 2013-3-30 Removed refernce to bootloader expert page and suggest using grub2 where other grub2 systems exist #. type: Content of: <section><mediaobject> #: en/setupBootloader.xml:11 msgid "" "<imageobject> <imagedata revision=\"1\" align=\"center\" " "fileref=\"dx2-setupBootloader.png\" xml:id=\"setupBootloader-im1\" " "format=\"PNG\" /> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/setupBootloader.xml:16 msgid "" "If you prefer different bootloader settings to those chosen automatically by " "the installer, you can change them here." msgstr "" #. type: Content of: <section><para> #: en/setupBootloader.xml:20 msgid "" "You may already have another operating system on your machine, in which case " "you need to decide whether to add Mageia to your existing bootloader, or " "allow Mageia to create a new one." msgstr "" #. type: Content of: <section><tip><para> #: en/setupBootloader.xml:26 msgid "The Mageia graphical menus are nice :)" msgstr "" #. type: Content of: <section><section><info><title> #: en/setupBootloader.xml:32 msgid "Using a Mageia bootloader" msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:36 msgid "" "By default, Mageia writes a new GRUB (legacy) bootloader into the MBR " "(Master Boot Record) of your first hard drive. If you already have other " "operating systems installed, Mageia attempts to add them to your new Mageia " "boot menu." msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:41 msgid "" "Mageia now also offers GRUB2 as an optional bootloader in addition to GRUB " "legacy and Lilo." msgstr "" #. type: Content of: <section><section><warning><para> #: en/setupBootloader.xml:45 msgid "" "Linux systems which use the GRUB2 bootloader are not currently supported by " "GRUB (legacy) and will not be recognised if the default GRUB bootloader is " "used." msgstr "" #. type: Content of: <section><section><warning><para> #: en/setupBootloader.xml:49 msgid "" "The best solution here is to use the GRUB2 bootloader which is available at " "the Summary page during installation." msgstr "" #. type: Content of: <section><section><info><title> #: en/setupBootloader.xml:56 msgid "Using an existing bootloader" msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:60 msgid "" "If you decide to use an existing bootloader then you will need to remember " "to STOP at the summary page during the installation and click the Bootloader " "<guibutton>Configure</guibutton> button, which will allow you to change the " "bootloader install location." msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:66 msgid "" "Do not select a device e.g.\"sda\", or you will overwrite your existing " "MBR. You must select the root partition that you chose during the " "partitioning phase earlier, e.g. sda7." msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:71 msgid "To be clear, sda is a device, sda7 is a partition on that device." msgstr "" #. type: Content of: <section><section><tip><para> #: en/setupBootloader.xml:75 msgid "" "Go to tty2 with Ctrl+Alt+F2 and type <literal>df</literal> to check where " "your <literal>/</literal> (root) partition is. Ctrl+Alt+F7 takes you back to " "the installer screen." msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:81 msgid "" "The exact procedure for adding your Mageia system to an existing bootloader " "is beyond the scope of this help, however in most cases it will involve " "running the relevant bootloader installation program which should detect and " "add it automatically. See the documentation for the operating system in " "question." msgstr "" #. type: Content of: <section><section><info><title> #: en/setupBootloader.xml:91 msgid "Bootloader advanced option" msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:95 msgid "" "If you have very limited disk space for the <literal>/</literal> partition " "that contains <literal>/tmp</literal>, click on " "<guibutton>Advanced</guibutton> and check the box for <guilabel>Clean /tmp " "at each boot</guilabel>. This helps to maintain some free space." msgstr "" #. type: Content of: <section><info><title> #: en/setupSCSI.xml:11 msgid "Setup SCSI" msgstr "" #. Made by marja on 2012 04 02 #. NEEDS TO BE REVIEWED! #. JohnR - edited 2012-03-03 #. SimonNZG has reviewed 2012-04-03 (changed editted to edited in JohnR's comment ;-) #. barjac has re-reviewed and made some minor tweaks. Revisions incremented. #. marja 2012-04-24 added screenshot #. marja 2012-04-25 replacing John's version 1.6 because that one was based on the #. Mdv doc instead of on our setupSCSI file #. type: Content of: <section><mediaobject> #: en/setupSCSI.xml:26 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" " "format=\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> " "</imageobject>" msgstr "" #. type: Content of: <section><para> #: en/setupSCSI.xml:32 msgid "" "DrakX usually detects hard disks correctly. With some older SCSI controllers " "it may be unable to determine the correct drivers to use and subsequently " "fail to recognise the drive." msgstr "" #. type: Content of: <section><para> #: en/setupSCSI.xml:36 msgid "" "If this happens, you will need to manually tell Drakx which SCSI drive(s) " "you have." msgstr "" #. type: Content of: <section><para> #: en/setupSCSI.xml:39 msgid "DrakX should then be able to configure the drive(s) correctly." msgstr "" #. type: Content of: <section><info><title> #: en/takeOverHdConfirm.xml:4 msgid "Confirm hard disk to be formatted" msgstr "" #. Made by marja on 2012 04 03 #. test comment - johnr #. 2012-04-24 marja - replaced "if you are not sure you selected the correct #. hard disk." with "if you are not sure about your choice", because I'm sure I #. saw this help screen when I had only one HD #. 2013-05-05 marja added screenshot #. type: Content of: <section><mediaobject> #: en/takeOverHdConfirm.xml:19 msgid "" "<imageobject> <imagedata fileref=\"dx2-takeOverHdConfirm.png\" " "format=\"PNG\" align=\"center\" ></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/takeOverHdConfirm.xml:24 msgid "" "Click on <guibutton>Previous</guibutton> if you are not sure about your " "choice." msgstr "" #. type: Content of: <section><para> #: en/takeOverHdConfirm.xml:27 msgid "" "Click on <guibutton>Next</guibutton> if you are sure and want to erase every " "partition, every operating system and all data on that hard disk." msgstr ""