Opciones principales del cargador de arranqueInterfaz del cargador de arranquePor defecto, Mageia usa exclusivamente:Grub2 (con o sin menú gráfico) para sistemas Legacy/MBR o Legacy/GPTGrub2-efi para un sistema UEFI.Los menús gráficos de Mageia son agradables:Grub2 en sistemas Legacy/MBR y Legacy/GPTNo modifique el "Dispositivo de Arranque" a menos que sepa realmente qué
está hace.Grub2-efi en sistemas UEFIWith an UEFI system, the user interface is slightly different as you cannot
choose between with or without graphical menuIf Mageia is the only system installed on your computer, the installer
created an ESP (EFI System Partition) to receive the bootloader
(Grub2-efi). If there are already UEFI operating systems installed on your
computer (Windows 8 for example), the Mageia installer detects the existing
ESP created by Windows and adds grub2-efi. Although it is possible to have
several ESPs, only one is advised and enough whatever the number of
operating systems you have.No modifique el "Dispositivo de Arranque" a menos que sepa realmente qué
está hace.Usando el cargador de arranque de MageiaBy default, according to your system, Mageia writes a new:GRUB2 bootloader either into the MBR (Master Boot Record) of your first hard
drive or in the BIOS boot partition.Grub2-efi bootloader into the ESPIf you already have other operating systems installed, Mageia attempts to
add them to your new Mageia boot menu. If you don't want this behaviour,
click on Next and then uncheck the box
Probe Foreign OSUsando un cargador de arranque existenteEl proceso exacto para añadir su sistema operativo Mageia al cargador de
arranque existente están fuera del alcance de este manual, pero normalmente
consiste en ejecutar el programa de instalación del cargador de arranque que
debería detectarlo y añadirlo automáticamente. Vea la documentación del
sistema operativo en cuestión.Using chain loadingIf you don't want a bootable Mageia, but to chain load it from another OS,
click on Next, then on
Advanced and Check the box Do not touch ESP
or MBR.You will get a warning that the bootloader is missing, ignore it by clicking
OK.OpcionesFirst pageDelay before booting the default image: This text box
lets you set a delay in seconds before the default operating system is
started up.Security: This allows you to set a password for the
bootloader. This means other people can not enter single user mode or change
settings at the boot time.Password: This text box is where you actually put the
passwordPassword (again): Retype the password and Drakx will
check that it matches with the one set above.AdvancedEnable ACPI: ACPI (Advanced Configuration and Power
Interface) is a standard for the power management. It can save energy by
stopping unused devices, this was the method used before APM. Unchecking it
could be useful if, for example, your computer does not support ACPI or if
you think the ACPI implementation might cause some problems (for instance
random reboots or system lockups).Enable SMP: This option enables / disables symmetric
multiprocessing for multi core processors.Enable APIC: Enabling or disabling this gives the
operating system access to the Advanced Programmable Interrupt
Controller. APIC devices permit more complex priority models, and Advanced
IRQ (Interrupt Request) management.Enable Local APIC: Here you can set local APIC, which
manages all external interrupts for a specific processor in an SMP system.Next pageDefault: Operating system started up by defaultAppend: This option lets you pass the kernel
information or tell the kernel to give you more information as it boots.Probe foreign OS: see above Using a Mageia bootloaderAdvancedVideo mode: This sets the screen size and colour depth
the boot menu will use. If you click the down triangle you will be offered
other size and colour depth options.Do not touch ESP or MBR: see above Using the chain loading