# SOME DESCRIPTIVE TITLE
# Copyright (C) YEAR Mageia
# This file is distributed under the same license as the Mageia Installer Help package.
#
# Translators:
# Adolfo Jayme Barrientos <fitoschido@ubuntu.com>, 2014
# motitos, 2013-2014
# Fernando J. E. Aren <phy.tester@gmail.com>, 2014
# jdru_drv <j.d.ramirez.u@gmail.com>, 2014
# jdru_drv <j.d.ramirez.u@gmail.com>, 2014
# Miguel Ortega, 2013
# tortuleon <rodrigo.prieto@ymail.com>, 2014
# tortuleon <rodrigo.prieto@ymail.com>, 2014
msgid ""
msgstr ""
"Project-Id-Version: Mageia\n"
"Report-Msgid-Bugs-To: doc-discuss@ml.mageia.org\n"
"POT-Creation-Date: 2014-10-12 15:13+0300\n"
"PO-Revision-Date: 2014-08-25 13:57+0000\n"
"Last-Translator: Fernando J. E. Aren <phy.tester@gmail.com>\n"
"Language-Team: Spanish (http://www.transifex.com/projects/p/mageia/language/"
"es/)\n"
"Language: es\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#. type: Content of: <section><info><title>
#: en/acceptLicense.xml:32
msgid "License and Release Notes"
msgstr "Licencia y Notas de Versión"

#. type: Content of: <section><mediaobject>
#: en/acceptLicense.xml:36
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-license.png\" format="
"\"PNG\" revision=\"1\" xml:id=\"acceptLicense-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata xml:id=\"acceptLicense-im1\" revision=\"1\" align="
"\"center\" format=\"PNG\" fileref=\"dx2-license.png\" /> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/acceptLicense.xml:45
msgid "License Agreement"
msgstr "Acuerdo de la Licencia"

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:48
msgid ""
"Before installing <application>Mageia</application>, please read the license "
"terms and conditions carefully."
msgstr ""
"Antes de instalar <application>Mageia</application>, por favor, lea "
"cuidadosamente los términos y condiciones de la licencia ."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:51
msgid ""
"These terms and conditions apply to the entire <application>Mageia</"
"application> distribution and must be accepted before you can continue."
msgstr ""
"Estos términos y condiciones se aplican a la distribución completa de "
"<application>Mageia</application> y tiene que aceptarlos para poder "
"continuar."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:55
msgid ""
"To accept, simply select <guilabel>Accept</guilabel> and then click on "
"<guibutton>Next</guibutton>."
msgstr ""
"Para aceptar, simplemente seleccione <guilabel>Aceptar</guilabel> y luego "
"haga click en <guibutton>Siguiente</guibutton>."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:58
msgid ""
"If you decide not to accept these conditions, then we thank you for looking. "
"Clicking <guibutton>Quit</guibutton> will reboot your computer."
msgstr ""
"Si decide no aceptar las condiciones, nosotros le agradecemos que las haya "
"leído. Haciendo click en <guibutton>Salir</guibutton> se reiniciará su "
"ordenador."

#. type: Content of: <section><section><info><title>
#: en/acceptLicense.xml:68
msgid "Release Notes"
msgstr "Notas de versión"

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:75
msgid ""
"To see what's new in this release of <application>Mageia</application>, "
"click on the <guibutton>Release Notes</guibutton> button."
msgstr ""
"Para ver que hay nuevo en esta versión de <application>Mageia</application>, "
"haga click en <guibutton>Notas de versión</guibutton>."

#. type: Attribute 'xml:lang' of: <section>
#: en/add_supplemental_media.xml:2 en/DrakX-cover.xml:2 en/DrakX.xml:1
#: en/media_selection.xml:1 en/uninstall-Mageia.xml:2
msgid "en"
msgstr "es"

#. type: Content of: <section><info><title>
#: en/add_supplemental_media.xml:10
msgid "Media Selection (Configure Supplemental Installation Media)"
msgstr ""
"Selección de repositorios (Configurar repositorios de instalación "
"suplementarios)"

#.  papoteur 2013-04-13  - created 
#.  marja 2013-04-16 added screenshot and expanded title (because is was the same as for media_selection 
#.  marja 2013-04-16 s/a optical/an optcal/ s/support/disc/ s/or or/or/ s/at/during/ as suggested by Tristan Campbell 
#. type: Content of: <section><mediaobject>
#: en/add_supplemental_media.xml:18
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-"
"add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-"
"add_supplemental_media-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-"
"add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-"
"add_supplemental_media-im1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/add_supplemental_media.xml:24
msgid ""
"This screen gives you the list of already recognized repositories. You can "
"add other sources for packages, like an optical disc or a remote source. The "
"source selection determines which packages will be available for selection "
"during the next steps."
msgstr ""
"Esta pantalla muestra la lista de repositorios ya reconocidos. Puede agregar "
"otras fuentes de paquetes como un disco óptico o una fuente remota. La "
"selección de fuentes determina qué paquetes pueden ser elegidos en los "
"siguientes pasos."

#. type: Content of: <section><para>
#: en/add_supplemental_media.xml:29
msgid "For a network source, there are two steps to follow:"
msgstr "Para un repositorio por red, hay dos pasos a seguir:"

#. type: Content of: <section><orderedlist><listitem><para>
#: en/add_supplemental_media.xml:33
msgid "Choosing and activation of the network, if not already up."
msgstr "Elección y activación de la red, si es que no está activada ya."

#. type: Content of: <section><orderedlist><listitem><para>
#: en/add_supplemental_media.xml:37
msgid ""
"Selecting a mirror or specifying a URL (very first entry). By selecting a "
"mirror, you have access to the selection of all repositories managed by "
"Mageia, like the Nonfree , the Tainted repositories and the Updates. With "
"the URL, you can designate a specific repository or your own NFS "
"installation."
msgstr ""
"Seleccionar un servidor espejo o especificar una URL (la primera entrada). "
"Al seleccionar un servidor espejo tendrá acceso a la selección de todos los "
"repositorios administrados por Mageia, tales como los repositorios nonfree, "
"tainted y updates. Con la URL, puede designar un repositorio específico o su "
"propia instalación NFS."

#. type: Content of: <section><info><title>
#: en/addUser.xml:4
msgid "User and Superuser Management"
msgstr "Administración de usuarios y del administrador"

#.  Started by marja,using Led43's text, on 2012 03 27 
#.  NEEDS TO BE REVIEWED! 
#.  SimonNZG 2012-04-03 has taken a look but needs to come back 
#.  removed para xml:id's, finished the page using Led43's text in the wiki, but
#.        changed his text about the Advanced User Managment screen (the only thing 
#.        about guest account there, is the box you can tick or untick to enable or 
#.        disable it, the rest is about the normal user you're adding in the previous
#.        screen), marja, 20120409
#.  barjac 2012-04-13 moved explanation of xguest lower down. I don't understand
#.        "rbash" in the xguest warning - is that correct? 
#.  JohnR 2012-04-19 Language proofreading  
#.  marja 2012-04-24 Added screenshot 
#.  marja 2013-04-26 added new note 
#. type: Content of: <section><mediaobject>
#: en/addUser.xml:27
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setRootPassword.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"setRootPassword-im1\"></imagedata> "
"</imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id="
"\"setRootPassword-im1\" fileref=\"dx2-setRootPassword.png\" format=\"PNG\" /"
"> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:34
msgid "Set Administrator (root)  Password:"
msgstr "Configure la Contraseña del Administrador (root)"

#. type: Content of: <section><section><para>
#: en/addUser.xml:38
msgid ""
"It is advisable for all <application>Mageia</application> installations to "
"set a superuser or administrator's password, usually called the "
"<emphasis>root password</emphasis> in Linux. As you type a password into the "
"top box the colour of its shield will change from red to yellow to green "
"depending on the strength of the password. A green shield shows you are "
"using a strong password. You need to repeat the same password in the box "
"just below the first password box, this checks that you have not mistyped "
"the first password by comparing them."
msgstr ""
"Es recomendable que configure una contraseña de administrador/súper usuario, "
"conocida como <emphasis>contraseña de root</emphasis> en Linux, para todas "
"las instalaciones de <application>Mageia</application>. Conforme vaya "
"escribiendo una contraseña en el recuadro, el color del escudo irá cambiando "
"desde rojo a amarillo hasta verde, dependiendo del nivel de seguridad de la "
"contraseña. Un escudo verde muestra un alto grado de seguridad.Necesita "
"repetir la misma en el recuadro de abajo, para comprobar que no ha cometido "
"ningún error en la primera contraseña,comparándolas."

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:48
msgid ""
"All passwords are case sensitive, it is best to use a mixture of letters "
"(upper and lower case), numbers and other characters in a password."
msgstr ""
"Todas las contraseñas son sensibles a las mayúsculas. Para tener una "
"contraseña segura, se recomienda usar una mezcla de letras (mayúsculas y "
"minúsculas), números y otros símbolos."

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:56
msgid "Enter a user"
msgstr "Introduzca un usuario"

#. type: Content of: <section><section><para>
#: en/addUser.xml:59
msgid ""
"Add a user here. A user has fewer rights than the superuser (root), but "
"enough to surf the internet, use office applications or play games and "
"anything else the average user does with his computer"
msgstr ""
"Aquí puede añadir un usuario. Un usuario tiene menos permisos que el "
"administrador, pero suficientes para navegar en Internet, usar aplicaciones "
"ofimáticas, jugar y cualquier cosa que un usuario medio hace con su "
"ordenador."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:65
msgid ""
"<guibutton>Icon</guibutton>: if you click on this button it will change the "
"users icon."
msgstr ""
"<guibutton>Icono</guibutton>: Si hace click en este botón cambiará el icono "
"del usuario."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:70
msgid ""
"<guilabel>Real Name</guilabel>: Insert the users real name into this text "
"box."
msgstr ""
"<guilabel>Nombre y Apellidos</guilabel>: Introduzca el nombre real del "
"usuario en este recuadro."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:75
msgid ""
"<guilabel>Login Name</guilabel>: Here you enter the user login name or let "
"drakx use a version of the users real name. <emphasis>The login name is case "
"sensitive.</emphasis>"
msgstr ""
"<guilabel>Nombre de conexión</guilabel>: Aquí puede introducir el nombre de "
"conexión del usuario o dejar a Drakx que cree un nombre de usuario a partir "
"del nombre real del usuario. <emphasis>El nombre de conexión es sensible a "
"las mayúsculas.</emphasis>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:81
msgid ""
"<guilabel>Password</guilabel>: In this text box you should type in the user "
"password. There is a shield at the end of the text box that indicates the "
"strength of the password. (See also <xref linkend=\"givePassword\"></xref>)"
msgstr ""
"<guilabel>Contraseña</guilabel>: En este recuadro debe de escribir la "
"contraseña del usuario. Hay un escudo al final del espacio que muestra el "
"nivel de seguridad de la contraseña. (Vea también <xref linkend="
"\"givePassword\"/>)"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:87
msgid ""
"<guilabel>Password (again)</guilabel>: Retype the user password into this "
"text box and drakx will check you have the same password in each of the user "
"password text boxes."
msgstr ""
"<guilabel>Contraseña (de nuevo)</guilabel>: Vuelva a escribir la contraseña "
"en este recuadro y Drakx comprobará que ha escrito la misma que en el "
"recuadro anterior."

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:94
msgid ""
"Any user you add while installing Mageia, will have a world readable (but "
"write protected) home directory."
msgstr ""
"Todo usario que se añada en la instación de Mageia tendrá un directorio "
"personal home legiblepor todos (pero protegido contra escritura)."

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:97
msgid ""
"However, while using your new install, any user you add in <emphasis>MCC - "
"System - Manage users on system</emphasis> will have a home directory that "
"is both read and write protected."
msgstr ""
"Sin embargo, cuando use su nueva instalación, todo usuario que añada en "
"<emphasis>MCC - Sistema - Administrar usuarios del sistema</emphasis> tendrá "
"un directorio personal home protegido contra lectura y escritura."

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:101
msgid ""
"If you don't want a world readable home directory for anyone, it is advised "
"to only add a temporary user now and to add the real one(s) after reboot."
msgstr ""
"Si no quiere directorios home legibles por todo el mundo, se recomienda "
"añadir ahora un usuario temporal y añadir los usuarios reales tras reiniciar "
"el ordenador."

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:105
msgid ""
"If you prefer world readable home directories, you might want to add all "
"extra needed users in the <emphasis>Configuration - Summary</emphasis> step "
"during the install. Choose <emphasis>User management</emphasis>."
msgstr ""
"Si prefiere directorios legibles por todo el mundo, puede añadir todos los "
"usuarios necesarios en <emphasis>Configuración - Resumen</emphasis> durante "
"la instación. Elija <emphasis>Administrar usuarios</emphasis>."

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:109
msgid "The access permissions can also be changed after the install."
msgstr "Los permisos de acceso se pueden cambiar también tras la instación."

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:116
msgid "Advanced User Management"
msgstr "Configuración avanzada de usuario"

#. type: Content of: <section><section><para>
#: en/addUser.xml:119
msgid ""
"If the <guibutton>advanced</guibutton> button is clicked you are offered a "
"screen that allows you to edit the settings for the user you are adding. "
"Additionally, you can disable or enable a guest account."
msgstr ""
"Si hace click en el botón <guibutton>avanzado</guibutton>, aparecerá una "
"pantalla que le permite editar la configuración del usuario que está "
"añadiendo. También puede habilitar o inhabilitar la cuenta de invitado."

#. type: Content of: <section><section><warning><para>
#: en/addUser.xml:124
msgid ""
"Anything a guest with a default <emphasis>rbash</emphasis> guest account "
"saves to his /home directory will be erased when he logs out.  The guest "
"should save his important files to a USB key."
msgstr ""
"Cualquier cosa que un usuario invitado (con <emphasis>rbash</emphasis>) "
"guarde en su directorio home será borrado cuando cierre sesión. El invitado "
"debe de guardar sus archivos importantes en una unidad USB."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:131
msgid ""
"<guilabel>Enable guest account</guilabel>: Here you can enable or disable a "
"guest account. The guest account allows a guest to log into and use the PC, "
"but he has more restricted access than normal users."
msgstr ""
"<guilabel>Habilitar cuenta de invitado</guilabel>: Aquí puede habilitar o "
"inhabilitar la cuenta de invitado. La cuenta de invitado permite a un "
"usuario ocasional acceder y usar el PC, pero tiene un acceso más restringido "
"que los usuarios normales."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:138
msgid ""
"<guilabel>Shell</guilabel>: This drop down list allows you to change the "
"shell used by the user you are adding in the previous screen, options are "
"Bash, Dash and Sh"
msgstr ""
"<guilabel>Shell</guilabel>: Esta pestaña permite cambiar el shell usado por "
"el usuario que está añadiendo. Las opciones son Bash, Dash y Sh."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:144
msgid ""
"<guilabel>User ID</guilabel>: Here you can set the user ID for the user you "
"are adding in the previous screen. This is a number.  Leave it blank unless "
"you know what you are doing."
msgstr ""
"<guilabel>ID de usuario</guilabel>: Aquí puede configurar el número de "
"identificación del usuario que está añadiendo. Es un número. Déjelo vació "
"salvo que sepa lo que está haciendo."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:150
msgid ""
"<guilabel>Group ID</guilabel>: This lets you set the group ID.  Also a "
"number, usually the same one as for the user. Leave it blank unless you know "
"what you are doing."
msgstr ""
"<guilabel>ID de grupo</guilabel>: Aquí puede configurar el número de "
"identificación del grupo. También es un número, normalmente el mismo que "
"para el usuario. Déjelo vacío salvo que sepa lo que está haciendo."

#. type: Content of: <section><info><title>
#: en/ask_mntpoint_s.xml:11
msgid "Choose the mount points"
msgstr "Elija los puntos de montaje"

#.  Made by marja on 2012 03 28 
#.  NEEDS TO BE REVIEWED! 
#.  SimonNZG 2012-04-03 has taken a look but needs to come back 
#.  removed para xml:id's, marja, 20120409 
#.  barjac 14/04/2012 Minor edit to improve grammar and replaced "at least ONE"
#.        with "a", as I can't imagine having more than one root partition ;) 
#.  Lebarhon : I put [] where it seems having mistakes 
#.  Marja: you're right, in English English it is "its type", however, the Americans
#.        write "it's type". And you're right about the redundant part, too, I removed it
#.  And JohnR says the Americans are WRONG! :-)) 
#.  2012-04-19  Language proofreading done 
#. type: Content of: <section><mediaobject>
#: en/ask_mntpoint_s.xml:27
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-chooseMountpoints.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"chooseMountPoints-im1\"></"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id="
"\"chooseMountPoints-im1\" format=\"PNG\" fileref=\"../es/dx2-"
"chooseMountpoints.png\" /> </imageobject>"

#. type: Content of: <section><para>
#: en/ask_mntpoint_s.xml:33
msgid ""
"Here you see the Linux partitions that have been found on your computer. If "
"you don't agree with the <application>DrakX</application> suggestions, you "
"can change the mount points."
msgstr ""
"Aquí puede ver las particiones de Linux que se han encontrado en su "
"ordenador. Si no está de acuerdo con la sugerencia de <application>DrakX</"
"application>, puede cambiar los puntos de montaje."

#. type: Content of: <section><note><para>
#: en/ask_mntpoint_s.xml:38
msgid ""
"If you change anything, make sure you still have a <literal>/</literal> "
"(root) partition."
msgstr ""
"Si cambia algo, asegúrese de que conserva una partición <literal>/</literal> "
"(root)."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:44
msgid ""
"Every partition is shown as follows: \"Device\" (\"Capacity\", \"Mount point"
"\", \"Type\")."
msgstr ""
"Cada partición se muestra así: \"Dispositivo\" (\"Capacidad\", \"Punto de "
"montaje\", \"Tipo\")."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:49
msgid ""
"\"Device\", is made up of: \"hard drive\", [\"hard drive number\"(letter)], "
"\"partition number\" (for example, \"sda5\")."
msgstr ""
"\"Dispositivo\", está compuesto por: \"disco duro\", [\"número del disco duro"
"\"(letra)], \"número de partición\" (por ejemplo, \"sda5\")."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:55
msgid ""
"If you have many partitions, you can choose many different mount points from "
"the drop down menu, such as <literal>/</literal>, <literal>/home</literal> "
"and <literal>/var</literal>. You can even make your own mount points, for "
"instance <literal>/video</literal> for a partition where you want to store "
"your films, or <literal>/cauldron-home</literal> for the <literal>/home</"
"literal> partition of a cauldron install."
msgstr ""
"Si tiene varias particiones, puede elegir diferentes puntos de montaje "
"desplegando la lista, como <literal>/</literal>, <literal>/home</literal> y "
"<literal>/var</literal>. También puede hacer sus propios puntos de montaje, "
"por ejemplo <literal>/video</literal> para nombrar una partición donde "
"quiere guardar sus películas, o <literal>/cauldron-home </literal> para la "
"partición <literal>/home</literal> de una instalación Cauldron."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:65
msgid ""
"For partitions you don't need to have access to, you can leave the mount "
"point field blank."
msgstr ""
"Para las particiones a las que no necesite acceso, puede dejar el punto de "
"montaje vacío."

#. type: Content of: <section><warning><para>
#: en/ask_mntpoint_s.xml:71
msgid ""
"Choose <guibutton>Previous</guibutton> if you are not sure what to choose, "
"and then tick <guilabel>Custom disk partitioning</guilabel>. In the screen "
"that follows, you can click on a partition to see its type and size."
msgstr ""
"Elija <guibutton>Anterior</guibutton> si no está seguro de qué elegir y "
"luego marque <guilabel>Particionamiento personalizado</guilabel>. En la "
"siguiente pantalla, puede hacer click en una partición para ver su tipo y "
"tamaño."

#. type: Content of: <section><para>
#: en/ask_mntpoint_s.xml:77
msgid ""
"If you are sure the mount points are correct, click on <guibutton>Next</"
"guibutton>, and choose whether you only want to format the partition(s) "
"DrakX suggests, or more."
msgstr ""
"Si está seguro de que los puntos de montaje son correctos, haga click en "
"<guibutton>Siguiente</guibutton>, y elija si quiere formatear o bien "
"solamentelas particiones que DrakX sugiere o bien alguna más."

#. type: Content of: <section><info><title>
#: en/chooseDesktop.xml:5
msgid "Desktop Selection"
msgstr "Selección de escritorio"

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:11
msgid ""
"Depending on your selection here, you may be offered further screens to fine "
"tune your choice."
msgstr ""
"Dependiendo de su selección aquí, pueden aparecer otras ventanas para "
"ajustar su elección de manera más precisa."

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:13
msgid ""
"After the selection step(s), you will see a slide show during package "
"installation. The slide show can be disabled by pressing the "
"<guilabel>Details</guilabel> button"
msgstr ""
"Después de los pasos de selección, verá una presentación durante la "
"instalación de los paquetes. Esta presentación puede desactivarse pulsando "
"<guilabel>Detalles</guilabel>."

#. type: Content of: <section><mediaobject>
#: en/chooseDesktop.xml:20
msgid ""
"<imageobject> <imagedata fileref=\"dx2-chooseDesktop.png\" align=\"center\" "
"format=\"PNG\" ></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"../es/dx2-chooseDesktop.png\" align="
"\"center\" format=\"PNG\" /> </imageobject>"

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:26
msgid ""
"Choose whether you prefer to use the <application>KDE</application> or "
"<application>Gnome</application> desktop environment. Both come with a full "
"set of useful applications and tools. Tick <guilabel>Custom</guilabel> if "
"you want to use neither or both, or if you want something other than the "
"default software choices for these desktop environments. The "
"<application>LXDE</application> desktop is lighter than the previous two, "
"sporting less eye candy and fewer packages installed by default."
msgstr ""
"Elija el entorno de escritorio que prefiera, <application>KDE</application> "
"o <application>Gnome</application>. Ambos incluyen un juego completo de "
"útiles aplicaciones y herramientas. Marque <guilabel>Personalizada</"
"guilabel> si no quiere usar ninguno o ambos, o si quiere algo más que el "
"software elegido por defecto para cada entorno de escritorio. El escritorio "
"<application>LXDE</application> es más ligero que los otros dos anteriores, "
"con una apariencia menos llamativa y menos paquetes instalados por defecto."

#. type: Content of: <section><info><title>
#: en/choosePackageGroups.xml:4
msgid "Package Group Selection"
msgstr "Selección de Grupo de Paquetes"

#. 2012-12-26 marja - exported this section from choosePackages.xml to start a new page
#. type: Content of: <section><mediaobject>
#: en/choosePackageGroups.xml:10
msgid ""
"<imageobject> <imagedata fileref=\"dx2-choosePackageGroups.png\" align="
"\"center\" format=\"PNG\" ></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-choosePackageGroups."
"png\" format=\"PNG\" /> </imageobject>"

#. type: Content of: <section><para>
#: en/choosePackageGroups.xml:16
msgid ""
"Packages have been sorted into groups, to make choosing what you need on "
"your system a lot easier. The groups are fairly self explanatory, however "
"more information about the content of each is available in tool-tips which "
"become visible as the mouse is hovered over them."
msgstr ""
"Los paquetes han sido agrupados para hacer mucho más sencilla la elección de "
"lo que necesite. Los grupos se definen intuitivamente. Sin embargo, si "
"necesita más información, simplemente pasando el ratón por encima de cada "
"grupo se muestra más información sobre ellos."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:23
msgid "Workstation."
msgstr "Estación de trabajo."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:27
msgid "Server."
msgstr "Servidor."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:31
msgid "Graphical Environment."
msgstr "Entorno gráfico."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:35
msgid ""
"Individual Package Selection: You can use this option to manually add or "
"remove packages."
msgstr ""
"Selección individual de paquetes: Puede usar esta opción para añadir o "
"eliminar manualmente los paquetes."

#. type: Content of: <section><para>
#: en/choosePackageGroups.xml:39
msgid ""
"Read <xref linkend=\"minimal-install\"></xref> for instructions on how to do "
"a minimal install."
msgstr ""
"Lea <xref linkend=\"minimal-install\"></xref> para instrucciónes sobre como "
"hacer una instalación minima."

#. type: Content of: <section><info><title>
#: en/choosePackagesTree.xml:4
msgid "Choose Individual Packages"
msgstr "Elegir paquetes detalladamente"

#. 2012-12-26 marja - exported this section from choosePackages.xml to start a new page
#. type: Content of: <section><mediaobject>
#: en/choosePackagesTree.xml:11
msgid ""
"<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" align="
"\"center\" format=\"PNG\" ></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-choosePackagesTree."
"png\" format=\"PNG\" /> </imageobject>"

#. type: Content of: <section><para>
#: en/choosePackagesTree.xml:17
msgid ""
"Here you can add or remove any extra packages to customise your installation."
msgstr ""
"Aquí puede añadir o eliminar cualquier paquete extra para personalizar su "
"instalación."

#. type: Content of: <section><para>
#: en/choosePackagesTree.xml:20
msgid ""
"After having made your choice, you can click on the <guibutton>floppy icon</"
"guibutton> at the bottom of the page to save your choice of packages (saving "
"to a USB key works, too). You can then use this file to install the same "
"packages on another system, by pressing the same button during install and "
"choosing to load it."
msgstr ""
"Después de elegir, puede hacer click en el <guibutton>icono del disquete</"
"guibutton> al final de la página para guardar su elección de paquetes "
"(también puede guardarlas en una unidad USB). Puede usar este archivo para "
"instalar los mismos paquetes en otro sistema, pulsando el mismo botón "
"durante la instalación para cargarlo."

#. type: Content of: <section><info><title>
#: en/configureServices.xml:12
msgid "Configure your Services"
msgstr "Configure sus Servicios"

#.  2012-12-25 marja - moved this section out of misc-params.xml 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/configureServices.xml:21
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></"
"imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/configureServices.xml:27
msgid ""
"Here you can set which services should (not) start when you boot your system."
msgstr ""
"Aquí puede configurar que servicios deberían (o no) iniciarse cuando "
"arranque su sistema."

#. type: Content of: <section><para>
#: en/configureServices.xml:30
msgid ""
"There are four groups, click on the triangle before a group to expand it and "
"see all services in it."
msgstr ""
"Hay cuatro grupos, haga click en el triángulo junto al grupo para expandirlo "
"y ver todos los servicios que contiene."

#. type: Content of: <section><para>
#: en/configureServices.xml:34
msgid "The setting DrakX chose are usually good."
msgstr "La configuración elegida por DrakX es normalmente la más correcta."

#. type: Content of: <section><para>
#: en/configureServices.xml:37
msgid ""
"If you highlight a service, some information about it is shown in the info "
"box below."
msgstr ""
"Si selecciona un servicio, se mostrara información de este en el recuadro de "
"abajo."

#. type: Content of: <section><para>
#: en/configureServices.xml:41
msgid "Only change things when you know very well what you are doing."
msgstr "Sólo cambie servicios cuando sepa bien lo que está haciendo."

#. type: Content of: <section><info><title>
#: en/configureTimezoneUTC.xml:12
msgid "Configure your Timezone"
msgstr "Configure su huso horario"

#.  2012-12-25 marja - moved this part out of misc-params.xml 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/configureTimezoneUTC.xml:20
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureTimezoneUTC."
"png\" align=\"center\" format=\"PNG\" xml:id=\"configureTimezoneUTC-im1\"></"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureTimezoneUTC."
"png\" align=\"center\" format=\"PNG\" xml:id=\"configureTimezoneUTC-im1\"></"
"imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/configureTimezoneUTC.xml:26
msgid ""
"Choose your time zone by choosing your country or a city close to you in the "
"same time zone."
msgstr ""
"Elija su zona escogiendo su país o una ciudad próxima a usted en el mismo "
"huso horario."

#. type: Content of: <section><para>
#: en/configureTimezoneUTC.xml:30
msgid ""
"In next screen you can choose to set your hardware clock to local time or to "
"GMT, also known as UTC."
msgstr ""
"En la siguiente pantalla, puede ajustar el reloj de su hardware a una hora "
"local o GMT, también conociddo como UTC."

#. type: Content of: <section><note><para>
#: en/configureTimezoneUTC.xml:35
msgid ""
"If you have more than one operating system on your computer, make sure they "
"are all set to local time, or all to UTC/GMT."
msgstr ""
"Si tiene más de un sistema operativo en su máquina, asegúrese de que todos "
"están ajustados bien a la hora local bien a UTC/GMT."

#. type: Content of: <section><info><title>
#: en/configureX_card_list.xml:11
msgid "Choose an X Server (Configure your Graphic Card)"
msgstr "Escoja un servidor X (Configurando su tarjeta gráfica)"

#. type: Content of: <section><mediaobject>
#: en/configureX_card_list.xml:16
msgid ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id="
"\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" format="
"\"PNG\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id="
"\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" format="
"\"PNG\" /> </imageobject>"

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:21
msgid ""
"DrakX has a very comprehensive database of video cards and will usually "
"correctly identify your video device."
msgstr ""
"DrakX tiene una base de datos de tarjetas gráficas bastante amplia y "
"usualmente puede identificar su tarjeta correctamente."

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:24
msgid ""
"If the installer has not correctly detected your graphic card and you know "
"which one you have, you can select it from the tree by:"
msgstr ""
"Si el instalador no ha dectectado su tarjeta grafica correctamente y usted "
"sabe cuál es, puede escogerla del árbol:"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:27 en/configureX_monitor.xml:69
msgid "vendor"
msgstr "fabricante"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:31
msgid "then the name of your card"
msgstr "el nombre de su tarjeta"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:35
msgid "and the type of card"
msgstr "y el tipo de tarjeta"

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:39
msgid ""
"If you cannot find your card in the vendor lists (because it's not yet in "
"the database or it's an older card) you may find a suitable driver in the "
"Xorg category"
msgstr ""
"Si no puede encontrar su tarjeta en la lista de fabricantes (porque todavía "
"no se ha incluido en la base de datos o la tarjeta es vieja) puede encontrar "
"un controlador apropiado en la categoría de Xorg."

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:43
msgid ""
"The Xorg listing provides more than 40 generic and open source video card "
"drivers. If you still can't find a named driver for your card there is the "
"option of using the vesa driver which provides basic capabilities."
msgstr ""
"El listado de Xorg provee más de 40 controladores genéricos y de código "
"abierto para su tarjeta de vídeo. Si todavía no puede encontrar un "
"controlador adecuado para su tarjeta, tiene la opción de usar el controlador "
"vesa. Este controlador provee una capacidad básica a su tarjeta de vídeo."

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:48
msgid ""
"Be aware that if you select an incompatible driver you may only have access "
"to the Commandline Interface."
msgstr ""
"Sea consciente que si escoge el controlador equivocado, podria tener acceso "
"solamente al interfaz de la línea de comandos."

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:51
msgid ""
"Some video card manufacturers provide proprietary drivers for Linux which "
"may only be available in the Nonfree repository and in some cases only from "
"the card manufacturers' websites."
msgstr ""
"Algunos fabricantes de tarjetas de vídeo proveen controladores propietarios "
"para Linux que se encuentran solamente en los repositorios Nonfree. En "
"algunos casos, solo se encuentran en el sitio web del fabricante."

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:55
msgid ""
"The Nonfree repository needs to be explicitly enabled to access them.  If "
"you didn't select it previously, you should do this after your first reboot."
msgstr ""
"Los repositorios Nonfree tienen que ser activados explícitamente para poder "
"acceder a ellos. Esto se debe hacer después de reiniciar su sistema."

#. type: Content of: <section><info><title>
#: en/configureX_chooser.xml:4
msgid "Graphic Card and Monitor Configuration"
msgstr "Configuración de la tarjeta gráfica y del monitor"

#.  Marja 2012-08-10, copied setupX.xml to this file and replaced all "setupX" in the code by "configureX_chooser", because this is the correct filename for this page
#. type: Content of: <section><mediaobject>
#: en/configureX_chooser.xml:11
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureX_chooser.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureX_chooser-im1\"> </"
"imagedata> </imageobject>"
msgstr ""
"  <imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureX_chooser."
"png\" align=\"center\" format=\"PNG\" xml:id=\"configureX_chooser-im1\"> </"
"imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/configureX_chooser.xml:18
msgid ""
"No matter which graphical environment (also known as desktop environment) "
"you chose for this install of <application>Mageia</application>, they are "
"all based on a graphical user interface system called <acronym>X Window "
"System</acronym>, or simply <acronym>X</acronym>. So in order for "
"<acronym>KDE</acronym>, <acronym>Gnome</acronym>, <acronym>LXDE</acronym> or "
"any other graphical environment to work well, the following <acronym>X</"
"acronym> settings need to be correct. Choose the correct settings if you can "
"see that <application>DrakX</application> didn't make a choice, or if you "
"think the choice is incorrect."
msgstr ""
"Independientemente del entorno gráfico (también conocido como entorno de "
"escritorio) que usted elija para esta instalación de <application>Mageia</"
"application>, todos están basados en el sistema de interfaz gráfico de "
"usuario llamado <acronym>Sistema X Window</acronym>, o simplemente "
"<acronym>X</acronym>. Así, para que <acronym>KDE</acronym>, <acronym>Gnome</"
"acronym>, <acronym>LXDE</acronym> o cualquier otro entorno gráfico funcione "
"bien, la siguiente configuración de <acronym>X</acronym> debe ser correcta. "
"Elija la configuración adecuada si ve que <application>DrakX</application> "
"no eligió nada o no eligió correctamente."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:31
msgid ""
"<emphasis><guibutton>Graphic card</guibutton></emphasis>: Choose your card "
"from the list if needed."
msgstr ""
"<emphasis><guibutton>Tarjeta gráfica</guibutton></emphasis>: Elija su "
"tarjeta de la lista si es necesario."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:37
msgid ""
"<emphasis><guibutton>Monitor</guibutton></emphasis>: You can choose "
"<guilabel>Plug'n Play</guilabel> when applicable, or choose your monitor "
"from the <guilabel>Vendor</guilabel> or <guilabel>Generic</guilabel> list. "
"Choose <guilabel>Custom</guilabel> if you prefer to manually set the "
"horizontal and vertical refresh rates of your monitor."
msgstr ""
"<emphasis><guibutton>Monitor</guibutton></emphasis>: Puede elegir "
"<guilabel>Plug'n Play</guilabel> cuando sea posible, o escoger su monitor de "
"la lista <guilabel>Frabricantes</guilabel> o <guilabel>genérico</guilabel>. "
"Escoja <guilabel>personalizado</guilabel> si prefiere fijar manualmente las "
"tasas de refresco horizontal y vertical de su monitor."

#. type: Content of: <section><itemizedlist><listitem><warning><para>
#: en/configureX_chooser.xml:45
msgid "Incorrect refresh rates may damage your monitor"
msgstr "Tasas de refresco incorrectas pueden dañar su monitor"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:51
msgid ""
"<emphasis><guibutton>Resolution</guibutton></emphasis>: Set the desired "
"resolution and color depth of your monitor here."
msgstr ""
"<emphasis><guibutton>Resolución</guibutton></emphasis>: Fije la resolución "
"deseada y la profundidad de color de su monitor aquí."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:56
msgid ""
"<emphasis><guibutton>Test</guibutton></emphasis>: The test button does not "
"always appear during install. If the button is there, you can control your "
"settings by pressing it. If you see a question asking you whether your "
"settings are correct, you can answer \"yes\", and the settings will be kept. "
"If you don't see anything, you'll return to the configuration screen and be "
"able to reconfigure everything until the test is good. <emphasis>Make sure "
"your settings are on the safe side if the test button isn't available</"
"emphasis>"
msgstr ""
"<emphasis><guibutton>Prueba</guibutton></emphasis>: El botón de prueba no "
"siempre aparece durante la instalación. Si el botón está, puede controlar su "
"configuración pulsándolo. Si aparece una pregunta acerca de si la "
"configuración es correcta, puede responder \"sí\", y la configuración se "
"guardará. Si no ve nada, regresará a la pantalla de configuración y podrá "
"reconfigurar todo hasta que la prueba sea válido. <emphasis>Asegúrese de que "
"la configuración está en el lado seguro si el botón de prueba no está "
"disponible</emphasis>."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:67
msgid ""
"<emphasis><guibutton>Options</guibutton></emphasis>: Here you can choose to "
"enable or disable various options."
msgstr ""
"<emphasis><guibutton>Opciones</guibutton></emphasis>: Aquí puede escoger el "
"activar o desactivar varias opciones."

#. type: Content of: <section><info><title>
#: en/configureX_monitor.xml:18
msgid "Choosing your Monitor"
msgstr "Escogiendo su monitor"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:21
msgid ""
"DrakX has a very comprehensive database of monitors and will usually "
"correctly identify yours."
msgstr ""
"DrakX tiene un base de datos de monitores bastante amplia y usualmente puede "
"identificar su monitor correctamente."

#. type: Content of: <section><warning><para>
#: en/configureX_monitor.xml:26
msgid ""
"<emphasis>Selecting a monitor with different characteristics could damage "
"your monitor or video hardware. Please don't try something without knowing "
"what you are doing.</emphasis> If in doubt you should consult your monitor "
"documentation"
msgstr ""
"<emphasis>Escogiendo un monitor con características diferentes puede dañar "
"su pantalla o componentes de vídeo. Por favor, no intente hacer algo sin "
"saber lo que hace.</emphasis> Si tiene dudas, debe consultar la "
"documentacion de su monitor."

#. type: Content of: <section><mediaobject>
#: en/configureX_monitor.xml:34
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor."
"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor."
"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:42
msgid "<emphasis>Custom</emphasis>"
msgstr "<emphasis>Personalizado</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:44
msgid ""
"This option allows you to set two critical parameters, the vertical refresh "
"rate and the horizontal sync rate. Vertical refresh determines how often the "
"screen is refreshed and horizontal sync is the rate at which scan lines are "
"displayed."
msgstr ""
"Esta opción deja cambiar dos parámetros críticos, la tasa de refresco "
"vertical y la sincronizacion horizontal. La tasa de refresco vertical "
"determina cada cuánto se actualiza la pantalla y la sincronizacion "
"horizontal es la tasa por lo cual las lineas de escaneo se pueden ver."

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:49
msgid ""
"It is <emphasis>VERY IMPORTANT</emphasis> that you do not specify a monitor "
"type with a sync range that is beyond the capabilities of your monitor: you "
"may damage your monitor. If in doubt, choose a conservative setting and "
"consult your monitor documentation."
msgstr ""
"Es <emphasis>MUY IMPORTANTE</emphasis> que no escoja un tipo de monitor con "
"un tasa de refresco superior a la capacidad de su monitor real, puesto que "
"puede dañarlo. Si tiene duda, escoja un configuración conservadora y "
"consulte la documentacion de su monitor."

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:55
msgid "<emphasis>Plug 'n Play</emphasis>"
msgstr "<emphasis>Plug 'n Play</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:58
msgid ""
"This is the default option and tries to determine the monitor type from the "
"monitor database."
msgstr ""
"Esta es la opción predeterminada y trata de identificar el tipo de monitor "
"que tiene usando la base de datos de monitores."

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:63
msgid "<emphasis>Vendor</emphasis>"
msgstr "<emphasis>Vendedor</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:65
msgid ""
"If the installer has not correctly detected your monitor and you know which "
"one you have, you can select it from the tree by selecting:"
msgstr ""
"Si el instalador no pudo identificar su monitor correctamente y usted sabe "
"cuál es, lo puede escoger del árbol:"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_monitor.xml:73
msgid "the monitor manufacturers name"
msgstr "el nombre del fabricante del monitor"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_monitor.xml:77
msgid "the monitor description"
msgstr "la descripción del monitor"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:82
msgid "<emphasis>Generic</emphasis>"
msgstr "<emphasis>Genérico</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:84
msgid ""
"selecting this group displays nearly 30 display configurations such as "
"1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is "
"often a good monitor selection group if you need to use the Vesa card driver "
"when your video hardware cannot be determined automatically. Once again it "
"may be wise to be conservative in your selections."
msgstr ""
"escogiendo este grupo, se muestra casi 30 configuraciones de pantalla como "
"1024x768 @ 60Hz y encluye pantallas planas como las que se usan en "
"portátiles. Usualmente, este es un buen grupo para elegir monitores si "
"necesita usar el controlador de tarjetas Vesa cuando su hardware de vídeo no "
"se puede determinar automáticamente. De nuevo, es mejor realizar una "
"selección conservadora. "

#. type: Content of: <section><info><title>
#: en/diskdrake.xml:19
msgid "Custom disk partitioning with DiskDrake"
msgstr "Particionado de disco personalizado con DiskDrake"

#. type: Content of: <section><mediaobject>
#: en/diskdrake.xml:26
msgid ""
"<imageobject> <imagedata fileref=\"dx2-diskdrake.png\" align=\"center\"></"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-diskdrake.png\" align=\"center\"></"
"imagedata> </imageobject>"

#. type: Content of: <section><warning><para>
#: en/diskdrake.xml:33
msgid ""
"If you wish to use encryption on your <literal>/</literal> partition you "
"must ensure that you have a separate <literal>/boot</literal> partition. The "
"encryption option for the <literal>/boot</literal> partition must NOT be "
"set, otherwise your system will be unbootable."
msgstr ""
"Si desea encriptar su partición <literal>/</literal>, debe asegurarse de que "
"tiene una partición <literal>/boot</literal> separada. La opción de "
"encriptación para la partición <literal>/boot</literal> NO DEBE USARSE, de "
"lo contrario, su sistema no arrancará."

#. type: Content of: <section><para>
#: en/diskdrake.xml:39
msgid ""
"Adjust the layout of your disk(s) here. You can remove or create partitions, "
"change the filesystem of a partition or change its size and even view what "
"is in them before you start."
msgstr ""
"Ajuste la estructura de su(s) disco(s) aquí. Se pueden añadir y quitar "
"particiones, cambiar el sistema de archivos de una partición o cambiar su "
"tamaño, e incluso echar un vistazo antes de empezar."

#. type: Content of: <section><para>
#: en/diskdrake.xml:42
msgid ""
"There is a tab for every detected hard disk or other storage device, like an "
"USB key. For example sda, sdb and sdc if there are three of them."
msgstr ""
"Hay una pestaña para cada disco duro o sistema de almacenaje detectados, "
"como una unidad USB. Por ejemplo, sda, sdb y sdc si se encuentran tres."

#. type: Content of: <section><para>
#: en/diskdrake.xml:45
msgid ""
"Push <guibutton>Clear all</guibutton> to wipe all partitions on the selected "
"storage device"
msgstr ""
"Pulse <guibutton>Quitar todo</guibutton> para eliminar todas las particiones "
"del disco de almacenaje seleccionado."

#. type: Content of: <section><para>
#: en/diskdrake.xml:47
msgid ""
"For all other actions: click on the desired partition first. Then view it, "
"or choose a filesystem and a mount point, resize it or wipe it."
msgstr ""
"Para cada una de las restantes acciones: haga primero click en la partición "
"escogida. Entonces, véala, escoja un sistema de ficheros y un punto de "
"montaje, cambie el tamaño o elimínela."

#. type: Content of: <section><para>
#: en/diskdrake.xml:49
msgid "Continue until you adjusted everything to your wishes."
msgstr "Continue hasta que ajuste todo a su gusto."

#. type: Content of: <section><para>
#: en/diskdrake.xml:51
msgid "Click <guibutton>Done</guibutton> when you're ready."
msgstr "Haga click en <guibutton>Hecho</guibutton> cuando esté listo."

#. type: Content of: <section><info><title>
#: en/doPartitionDisks.xml:25
msgid "Partitioning"
msgstr "Particionando"

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:28
msgid ""
"In this screen you can see the content of your hard drive(s) and see the "
"solutions the DrakX partitioning wizard found for where to install "
"<application>Mageia</application>."
msgstr ""
"En esta pantalla puede ver el contenido de su(s) disco(s) duro(s) y ver el "
"sitio que el asistente de particionado de DrakX ha encontrado para instalar "
"<application>Mageia</application>."

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:33
msgid ""
"The options available from the list below will vary depending on your "
"particular hard drive(s) layout and content."
msgstr ""
"Las opciones disponibles en la lista de abajo pueden variar dependiendo del "
"contenido de su(s) disco(s)  duro(s)."

#. type: Content of: <section><mediaobject>
#: en/doPartitionDisks.xml:38
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-doPartitionDisks.png"
"\" /> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-doPartitionDisks.png"
"\" /> </imageobject>"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:45
msgid "Use Existing Partitions"
msgstr "Usar la partición existente"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:48
msgid ""
"If this option is available, then existing Linux compatible partitions have "
"been found and may be used for the installation."
msgstr ""
"Si esta opción está disponible significa que se han encontrado particiones "
"compatibles con Linux que pueden ser usadas para la instalación."

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:54
msgid "Use Free Space"
msgstr "Usar el espacio libre"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:56
msgid ""
"If you have unused space on your hard drive then this option will use it for "
"your new Mageia installation."
msgstr ""
"Si tiene espacio sin usar en su disco duro, esta opción lo usará para su "
"nueva instalación de Mageia."

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:62
msgid "Use Free Space on a Windows Partition"
msgstr "Usar espacio libre en una partición de Windows"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:65
msgid ""
"If you have unused space on an existing Windows partition, the installer may "
"offer to use it."
msgstr ""
"Si tiene espacio libre en una partición existente de Windows, el instalador "
"puede ofrecer usarlo."

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:69
msgid ""
"This can be a useful way of making room for your new Mageia installation, "
"but is a risky operation so you should make sure you have backed up all "
"important files!"
msgstr ""
"¡Esta puede ser una manera útil de hacer espacio para su nueva instalación "
"de Mageia, pero es una operación peligrosa, así que debería hacer una copia "
"de seguridad de todos sus archivos importantes!"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:74
msgid ""
"Note that this involves shrinking the size of the Windows partition. The "
"partition must be \"clean\", meaning that Windows must have closed down "
"correctly the last time it was used. It must also have been defragmented, "
"although this is not a guarantee that all files in the partition have been "
"moved out of the area that is about to be used. It is highly recommended to "
"back up your personal files."
msgstr ""
"Sea consciente de que esta operación implica una reducción del tamaño de la "
"partición de Windows. Esta partición debe de estar \"limpia\", es decir, "
"Windows debe de haberse cerrado correctamente la última vez que fue usado. "
"También debe de haber sido desfragmentada, aunque esto no garantiza que "
"todos los archivos de la partición hayan sido movidos fuera del área que se "
"va a usar. Por ello, es altamente recomendable hacer una copia de seguridad "
"de sus archivos personales."

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:84
msgid "Erase and use Entire Disk."
msgstr "Borrar y usar el disco entero"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:87
msgid "This option will use the complete drive for Mageia."
msgstr "Esta opción usará el disco completo para Mageia."

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:90
msgid "Note! This will erase ALL data on the selected hard drive. Take care!"
msgstr ""
"¡Aviso! Esto borrara TODA la información en el disco duro seleccionado. "
"¡Tenga cuidado!"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:93
msgid ""
"If you intend to use part of the disk for something else, or you already "
"have data on the drive that you are not prepared to lose, then do not use "
"this option."
msgstr ""
"Si pretende usar una parte del disco para otra cosa o ya tiene información "
"en la unidad que no quiere perder, no use esta opción."

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:100
msgid "Custom"
msgstr "Particionamiento  personalizado"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:102
msgid ""
"This gives you complete control over the placing of the installation on your "
"hard drive(s)."
msgstr ""
"Esta opción le ofrece el control completo sobre donde colocar su instalación "
"en su(s)  disco(s) duro(s)."

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:109
msgid ""
"Some newer drives are now using 4096 byte logical sectors, instead of the "
"previous standard of 512 byte logical sectors. Due to lack of available "
"hardware, the partitioning tool used in the installer has not been tested "
"with such a drive. Also some ssd drives now use an erase block size over 1 "
"MB. We suggest to pre-partition the drive, using an alternative partitioning "
"tool like gparted, if you own such a device, and to use the following "
"settings:"
msgstr ""
"Algunos discros duros recientes usan sectores lógicos de 4096 bytes, en vez "
"de la versión estándar de 512 bytes. Debido a la falta de hardware "
"disponiblela herramienta de particionado no se ha comprobado en tales "
"discos. Además, algunos discos ssd usarn un bloque de borrado de más de 1MB."
"Sugerimos que previamente se use otra herramienta de particionado como "
"gparted,en caso de que posea un disco de estos tipos, y que use las "
"siguientes configuraciones:"

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:117
msgid "\"Align to\" \"MiB\""
msgstr "\"Alinear a\" \"MiB\""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:119
msgid "\"Free space preceding (MiB)\" \"2\""
msgstr "\"Espacio libre que precede a (MiB)\" \"2\""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:121
msgid ""
"Also make sure all partitions are created with an even number of megabytes."
msgstr ""
"Asegúrese de que todas las particiones se han creado con un número par de "
"megabytes."

#. type: Content of: <article><info><title>
#: en/DrakX-cover.xml:4 en/DrakX-cover.xml:22 en/DrakX.xml:3
msgid "Installation with DrakX"
msgstr "Instalación con DrakX"

#. type: Content of: <book><info><cover><info>
#: en/DrakX-cover.xml:5 en/DrakX-cover.xml:23
msgid "<publisher> <publishername>Mageia.org</publishername> </publisher>"
msgstr "<publisher> <publishername>Mageia.org</publishername> </publisher>"

#. type: Content of: <book><info><cover><info><revhistory><revision><date>
#: en/DrakX-cover.xml:10 en/DrakX-cover.xml:28
msgid "February 2014"
msgstr "Febrero 2014"

#. type: Content of: <book><info><cover><info><revhistory><revision><revremark>
#: en/DrakX-cover.xml:11 en/DrakX-cover.xml:29
msgid "Mageia 4"
msgstr "Mageia 4"

#. type: Content of: <book><info><cover><para>
#: en/DrakX-cover.xml:15
msgid "The Official Documentation for Mageia"
msgstr "Documentación Oficial para Mageia"

#. type: Content of: <book><info><cover><mediaobject>
#: en/DrakX-cover.xml:17
msgid "<imageobject> <imagedata fileref=\"mageia-2013.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"mageia-2013.png\"/> </imageobject>"

#. type: Content of: <article><info><cover><para><note>
#: en/DrakX-cover.xml:42 en/DrakX.xml:6
msgid "<note>"
msgstr "<note>"

#. type: Content of: <article><info><cover><para><note><para>
#: en/DrakX-cover.xml:43 en/DrakX.xml:7
msgid ""
"No one will see all the installer screens that you see in this manual. Which "
"screens you will see, depends on your hardware and the choices you make "
"while installing."
msgstr ""
"Nadie verá las imágenes que puede ver en este manual. Las imágenes que verá "
"dependerán de su hardware y las decisiones que tomó durante la instalación."

#. type: Content of: <article><info><cover><para>
#: en/DrakX-cover.xml:46 en/DrakX.xml:10
msgid "</note>"
msgstr "</note>"

#. type: Content of: <article><info><cover><para>
#: en/DrakX-cover.xml:48 en/DrakX.xml:12
msgid ""
"The texts and screenshots in this manual are available under the CC BY-SA "
"3.0 license <link ns6:href=\"http://creativecommons.org/licenses/by-sa/3.0/"
"\">http://creativecommons.org/licenses/by-sa/3.0/</link>."
msgstr ""
"Los textos y capturas de pantalla de este manual están disponibles bajo la "
"licencia CC BY-SA 3.0 <link ns6:href=\"http://creativecommons.org/licenses/"
"by-sa/3.0/\">http://creativecommons.org/licenses/by-sa/3.0/</link>"

#. type: Content of: <article><info><cover><para>
#: en/DrakX-cover.xml:52 en/DrakX.xml:16
msgid ""
"This manual was produced with the help of the <link ns6:href=\"http://www."
"calenco.com\">Calenco CMS</link> developed by <link ns6:href=\"http://www."
"neodoc.biz\">NeoDoc</link>."
msgstr ""
"Éste manual ha sido realizado con la ayuda de <link ns6:href=\"http://www."
"calenco.com\">Calenco CMS</link> desarrollado por <link ns6:href=\"http://"
"www.neodoc.biz\">NeoDoc</link>"

#. type: Content of: <article><info><cover><para>
#: en/DrakX-cover.xml:54 en/DrakX.xml:18
msgid ""
"It was written by volunteers in their free time. Please contact <link ns6:"
"href=\"https://wiki.mageia.org/en/Documentation_team\">Documentation Team</"
"link>, if you would like to help improve this manual."
msgstr ""
"Fue escrito por voluntarios en sus ratos libres. Por favor contacte con el "
"<link ns6:href=\"https://wiki.mageia.org/en/Documentation_team\">Equipo de "
"Documentación</link> si puede ayudar a mejorar este manual."

#. type: Content of: <section><info><title>
#: en/exitInstall.xml:4
msgid "Congratulations"
msgstr "Felicitaciones"

#.  Started by marja on 2012 03 29 
#.  NEEDS TO BE WRITTEN AND THEN REVIEWED! 
#.  marja - 2012-04-24 added screenshot and text 
#.  same day, added "s" to "sytems"
#. type: Content of: <section><mediaobject>
#: en/exitInstall.xml:14
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-exitInstall.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"exitInstall-im1\"> </imagedata> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"../es/dx2-exitInstall.png\" revision="
"\"1\" align=\"center\" xml:id=\"exitInstall-im1\" format=\"PNG\" /> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/exitInstall.xml:21
msgid ""
"You have finished installing and configuring <application>Mageia</"
"application> and it is now safe to remove the installation medium and reboot "
"your computer."
msgstr ""
"Ha terminado de instalar y configurar <application>Mageia</application> y "
"ahora es seguro retirar el medio de instalación y reiniciar su ordenador."

#. type: Content of: <section><para>
#: en/exitInstall.xml:25
msgid ""
"After reboot, in the bootloader screen, you can choose between the operating "
"systems on your computer (if you have more than one)."
msgstr ""
"Después del reinicio, en el cargador de arranque, puede elegir entre los "
"sistemas operativos de su ordenador (si tiene más de uno)."

#. type: Content of: <section><para>
#: en/exitInstall.xml:28
msgid ""
"If you didn't adjust the settings for the bootloader, your Mageia install "
"will be automatically selected and started."
msgstr ""
"Si no ajustó la configuracion del cargador de arranque, su instalación de "
"Mageia será automáticamente seleccionada e iniciada."

#. type: Content of: <section><para>
#: en/exitInstall.xml:31
msgid "Enjoy!"
msgstr "¡Que lo disfrute!"

#. type: Content of: <section><para>
#: en/exitInstall.xml:33
msgid ""
"Visit www.mageia.org if you have any questions or want to contribute to "
"Mageia"
msgstr ""
"Visite www.mageia.org si tiene alguna duda o quiere contribuir con Mageia."

#. type: Content of: <section><info><title>
#: en/formatPartitions.xml:4
msgid "Formatting"
msgstr "Formateo"

#.  Made by marja on 2012 03 29 
#.  NEEDS TO BE REVIEWED! 
#.  marja 2012-04-24 added screenshot 
#.  marja 2012-04-24 added emphasis tags in formatPartitions-pa1 
#. type: Content of: <section><mediaobject>
#: en/formatPartitions.xml:18
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-formatPartitions.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"formatPartitions-im1\"> </"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata xml:id=\"formatPartitions-im1\" revision=\"1\" "
"fileref=\"../es/dx2-formatPartitions.png\" align=\"center\" format=\"PNG\" /"
"> </imageobject>"

#. type: Content of: <section><para>
#: en/formatPartitions.xml:25
msgid ""
"Here you can choose which partition(s) you wish to format. Any data on "
"partitions <emphasis>not</emphasis> marked for formatting will be saved."
msgstr ""
"Aquí puede elegir qué partición(es) quiere formatear. Se guardará cualquier "
"información en las particiones <emphasis>no</emphasis> marcadas para "
"formatear."

#. type: Content of: <section><para>
#: en/formatPartitions.xml:29
msgid "Usually at least the partitions DrakX selected, need to be formatted"
msgstr ""
"Normalmente, por lo menos las particiones seleccionadas por DrakX, necesitan "
"formatearse."

#. type: Content of: <section><para>
#: en/formatPartitions.xml:32
msgid ""
"Click on <guibutton>Advanced</guibutton> to choose partitions you want to "
"check for so called <emphasis>bad blocks</emphasis>"
msgstr ""
"Haga click en <guibutton>Avanzado</guibutton> para elegir particiones que "
"quiera comprobar los <emphasis>bloques defectuosos</emphasis>."

#. type: Content of: <section><tip><para>
#: en/formatPartitions.xml:37
msgid ""
"If you're not sure you have made the right choice, you can click on "
"<guibutton>Previous</guibutton>, again on <guibutton>Previous</guibutton> "
"and then on <guibutton>Custom</guibutton> to get back to the main screen.  "
"In that screen you can choose to view what is in your partitions."
msgstr ""
"Si no está seguro de haber hecho la elección correcta, puede hacer click en "
"<guibutton>Anterior</guibutton>, de nuevo en <guibutton>Anterior</guibutton> "
"y luego en <guibutton>Personalizado</guibutton> para volver a la pantalla "
"principal.  En esta pantalla puede comprobar lo que haya en sus particiones."

#. type: Content of: <section><para>
#: en/formatPartitions.xml:44
msgid ""
"When you are confident about the selection, click on <guibutton>Next</"
"guibutton> to continue."
msgstr ""
"Cuando esté seguro de su elección, haga click en <guibutton>Siguiente</"
"guibutton> para continuar."

#. type: Content of: <section><info><title>
#: en/installer.xml:17
msgid "DrakX, the Mageia Installer"
msgstr "DrakX, el instalador de Mageia"

#. type: Content of: <section><para>
#: en/installer.xml:20
msgid ""
"Whether you are new to GNU-Linux or an experienced user, the Mageia "
"Installer is designed to help make your installation or upgrade as easy as "
"possible."
msgstr ""
"Seas nuevo en GNU-Linux o un usuario avanzado, el instalador de Mageia está "
"diseñado para ayudarle a hacer su instalación o actualización lo más fácil "
"posible."

#. type: Content of: <section><para>
#: en/installer.xml:28
msgid ""
"The initial menu screen has various options, however the default one will "
"start the installer, which will normally be all that you will need."
msgstr ""
"El menú inicial tiene varias opciones, aunque la elegida por defecto "
"iniciará el instalador, que normalmente será todo lo que necesite."

#. type: Content of: <section><figure><info><title>
#: en/installer.xml:34
msgid "Installation Welcome Screen"
msgstr "Pantalla de bienvenida del Instalador"

#. type: Content of: <section><figure>
#: en/installer.xml:33
msgid "<placeholder type=\"info\" id=\"0\"/>"
msgstr "<placeholder type=\"info\" id=\"0\"/>"

#. type: Content of: <section><figure><para>
#: en/installer.xml:37
msgid "Here is the default welcome screen when using a Mageia DVD:"
msgstr ""
"Esta es la pantalla de bienvenida por defecto cuando se usa un DVD de Mageia:"

#. type: Content of: <section><figure><mediaobject>
#: en/installer.xml:40
msgid ""
"<imageobject> <imagedata xml:id=\"BId-drakx-intro-im1\" revision=\"1\" align="
"\"center\" format=\"PNG\" fileref=\"../dx-welcome.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata xml:id=\"BId-drakx-intro-im1\" revision=\"1\" align="
"\"center\" format=\"PNG\" fileref=\"../dx-welcome.png\"/> </imageobject>"

#. type: Content of: <section><figure>
#: en/installer.xml:39
msgid "<placeholder type=\"mediaobject\" id=\"0\"/>"
msgstr "<placeholder type=\"mediaobject\" id=\"0\"/>"

#. type: Content of: <section><para>
#: en/installer.xml:46
msgid ""
"From this first screen, it is possible to set some personal preferences:"
msgstr ""
"Desde esta primera pantalla, es posible configurar algunas preferencias "
"personales:"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:51
msgid ""
"The language (for the installation only, may be different that the chosen "
"language for the system) by pressing the key F2"
msgstr ""
"El idioma (solo para la instalación, puede que sea diferente del idioma "
"elegido para el sistema) presionando la tecla F2"

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:57
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:62
msgid "Use the arrow keys to select the language and press the key Enter."
msgstr ""
"Use las teclas de flechas para elegir el idioma y pulse la tecla Enter."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:65
msgid ""
"Here is for example, the French welcome screen when using a Live DVD/CD. "
"Note that the Live DVD/CD menu does not propose: <guilabel>Rescue System</"
"guilabel>, <guilabel>Memory test</guilabel> and <guilabel>Hardware Detection "
"Tool</guilabel>."
msgstr ""
"Aquí hay un ejemplo, la pantalla de bienvenida en Francés al emplear un CD/"
"DVD de tipo Live. Note que el menú de dicho DVD/CD no propone: "
"<guilabel>Sistema de recuperacion</guilabel>, <guilabel>Prueba de Memoria</"
"guilabel> ni <guilabel>Herramienta de deteccion de Hardware</guilabel>."

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:73
msgid "<imageobject> <imagedata fileref=\"dx-welcome4fr.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcome4fr.png\"/> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:82
msgid "Change the screen resolution by pressing the F3 key."
msgstr "Cambie la resolución de la pantalla pulsando la tecla F3."

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:85
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:92
msgid "Add some kernel options by pressing the F6 key."
msgstr "Añada algunas opciones al kernel pulsando la tecla F6."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:94
msgid ""
"If the installation fails, then it may be necessary to try again using one "
"of the extra options. The menu called by F6 displays a new line called "
"<guilabel>Boot options</guilabel> and propose four entries:"
msgstr ""
"Si la instalación falla, entonces puede ser necesario intentarlo de nuevo "
"usando alguna de las opciones extra. El menú que aparece al pulsar F6 "
"muestra la nueva línea <guilabel>Opciones de arranque</guilabel> y propone "
"cuatro opciones:"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:99
msgid "- Default, it doesn't alter anything in the default options."
msgstr "- Por defecto, no cambia nada en las opciones por defecto."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:102
msgid ""
"- Safe Settings, priority is given to the safer options to the detriment of "
"performances."
msgstr ""
"- Configuración segura, se da prioridad a las opciones más seguras en "
"detrimento del rendimiento."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:105
msgid ""
"- No ACPI (Advanced Configuration and Power Interface), power management "
"isn't taken into account."
msgstr ""
"- Sin ACPI (Advanced Configuration and Power Interface), la administración "
"de energía no se tiene en cuenta."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:108
msgid ""
"- No Local APIC (Local Advanced Programmable Interrupt Controller), it is "
"about CPU interruptions, select this option if you are asked for."
msgstr ""
"- Sin Local APIC (Local Advanced Programmable Interrupt Controller), se "
"refiere a las interrupciones de la CPU. Seleccione esta opción si se le pide."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:112
msgid ""
"When you select one of these entries, it modifies the default options "
"displayed in the <guilabel>Boot Options</guilabel> line."
msgstr ""
"Cuando seleccione una de estas entradas, se modifica las opciones por "
"defecto mostradas en la línea <guilabel>Opciones de Arranque</guilabel>."

#. type: Content of: <section><itemizedlist><listitem><note><para>
#: en/installer.xml:116
msgid ""
"In some Mageia releases, it may happen that the entries selected with the "
"key F6 does not appear in the <guilabel>Boot Options</guilabel> line, "
"however, they are really taken into account."
msgstr ""
"En algunas versiones de Maegia, puede suceder que las opciones seleccionadas "
"con la tecla F6 no aparezcan en la línea <guilabel>Opciones de Arranque</"
"guilabel>. Sin embargo, sí se tienen en cuenta."

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:123
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:130
msgid "Add more kernel options by pressing the key F1"
msgstr "Añada más opciones al kernel presionando la tecla F1"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:132
msgid ""
"Pressing F1 opens a new window with more available options. Select one with "
"the arrow keys and press Enter to have more details or press the Esc key to "
"go back to the welcome screen."
msgstr ""
"Presionando F1 se abre una nueva ventana con más opciones disponibles. "
"Seleccione una con las teclas de flechas y pulse Enter para más detalles, o "
"pulse la tecla Esc para volver a la ventana anterior."

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:139
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/installer.xml:146
msgid ""
"The detailed view about the option splash. Press Esc or select "
"<guilabel>Return to Boot Options</guilabel> to go back to the options list. "
"These options can by added by hand in the <guilabel>Boot options</guilabel> "
"line."
msgstr ""
"La vista detallada de la pantalla de opciones. Presione Esc o seleccione "
"<guilabel>Retornar a las opciones de Arranque</guilabel> para regresar a la "
"lista de opciones. Estas opciones pueden ser añadidas a mano en la linea de "
"<guilabel>Opciones de Arranque</guilabel>."

#. type: Content of: <section><itemizedlist><listitem><mediaobject>
#: en/installer.xml:152
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><note><para>
#: en/installer.xml:160
msgid "The help is translated in the chosen language with the F2 key."
msgstr ""
"Esta ayuda se encuentra traducida en el idioma de su elección con la tecla F2"

#. type: Content of: <section><para>
#: en/installer.xml:166
msgid ""
"Here is the default welcome screen when using a Wired Network-based "
"Installation CD (Boot.iso or Boot-Nonfree.iso images):"
msgstr ""
"Aqui se encuentra la pantalla de bienvenida por defecto cuando se utiliza un "
"CD de instalacion basada en Red Alambrica (imagenes Boot.iso o Boot-Nonfree."
"iso)"

#. type: Content of: <section><para>
#: en/installer.xml:169
msgid ""
"It does not allow to change the language, the available options are "
"described in the screen. For more information about using a Wired Network-"
"based Installation CD, see <link ns2:href=\"https://wiki.mageia.org/en/Boot."
"iso_install\">the Mageia Wiki</link>"
msgstr ""
"No se permite cambiar el idioma, las opciones están descritas en la "
"pantalla. Para mayor información relacionada a como usar el CD de "
"instalación basada en Red Alámbrica, visite <link ns2:href=\"https://wiki."
"mageia.org/en/Boot.iso_install\">el Wiki de Mageia</link>"

#. type: Content of: <section><warning><para>
#: en/installer.xml:175
msgid "The keyboard layout is the American one."
msgstr "La distribución del teclado es la de un teclado Americano"

#. type: Content of: <section><mediaobject>
#: en/installer.xml:179
msgid ""
"<imageobject> <imagedata revision=\"1\" xml:id=\"installer-im2\" align="
"\"center\" format=\"PNG\" fileref=\"../dx-help.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" xml:id=\"installer-im2\" align="
"\"center\" format=\"PNG\" fileref=\"../dx-help.png\"/> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/installer.xml:186
msgid "The installation steps"
msgstr "Los pasos de la instalación"

#. type: Content of: <section><section><para>
#: en/installer.xml:189
msgid ""
"The install process is divided into a number of steps, which can be followed "
"on the side panel of the screen."
msgstr ""
"El proceso de instalación está dividido en un número de pasos que pueden ser "
"seguidos en el panel lateral de la pantalla."

#. type: Content of: <section><section><para>
#: en/installer.xml:192
msgid ""
"Each step has one or more screens which may also have <guibutton>Advanced</"
"guibutton> buttons with extra, less commonly required, options."
msgstr ""
"Cada paso tiene una o varias pantallas que pueden tener botones "
"<guibutton>Avanzados</guibutton> con opciones extra, normalmente poco usadas."

#. type: Content of: <section><section><para>
#: en/installer.xml:196
msgid ""
"Most screens have <guibutton>Help</guibutton> buttons which give further "
"explanations about the current step."
msgstr ""
"La mayoría de las pantallas tiene botones de <guibutton>Ayuda</guibutton> "
"que le darán explicaciones sobre el paso en cuestión."

#. type: Content of: <section><section><note><para>
#: en/installer.xml:200
msgid ""
"If somewhere during install you decide to stop the installation, it is "
"possible to reboot, but please think twice before you do this.  Once a "
"partition has been formatted or updates have started to be installed, your "
"computer is no longer in the same state and rebooting it could very well "
"leave you with an unusable system. If in spite of this you are very sure "
"rebooting is what you want, go to a text terminal by pressing the three keys "
"<guibutton>Alt Ctrl F2</guibutton> at the same time. After that, press "
"<guibutton>Alt Ctrl Delete</guibutton> simultaneously to reboot."
msgstr ""
"Si en cualquier momento durante la instalación decide parar el proceso, es "
"posible reiniciar, pero piénselo dos veces. Una vez que una partición ha "
"sido formateada o cuando las actualizaciones han empezado a instalarse, su "
"ordenador no estará en el mismo estado y un reinicio puede dejarle con un "
"sistema inutilizable. No obstante, si decide reiniciar, acceda a la terminal "
"pulsando al mismo tiempo <guibutton>Alt Ctrl F2</guibutton>. Después, pulse "
"<guibutton>Alt Ctrl Delete</guibutton> simultáneamente para reiniciar."

#. type: Content of: <section><section><section><info><title>
#: en/installer.xml:215
msgid "Installation Problems and Possible Solutions"
msgstr "Problemas en la Instalación y Posibles Soluciones."

#. type: Content of: <section><section><section><section><info><title>
#: en/installer.xml:221
msgid "No Graphical Interface"
msgstr "No hay Interfaz Gráfica"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/installer.xml:226
msgid ""
"After the initial screen you did not reach the language selection screen. "
"This can happen with some graphic cards and older systems. Try using low "
"resolution by typing <code>vgalo</code> at the prompt."
msgstr ""
"Después de la pantalla inicial, no carga la pantalla de selección del "
"idioma. Esto puede ocurrir con algunas tarjetas gráficas y sistemas "
"antiguos. Intente usando una resolución más baja, escribiendo <code>vgalo</"
"code> en la terminal."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/installer.xml:233
msgid ""
"If the hardware is very old, a graphical installation may not be possible. "
"In this case it is worth trying a text mode installation. To use this hit "
"ESC at the first welcome screen and confirm with ENTER. You will be "
"presented with a black screen with the word \"boot:\". Type \"text\" and hit "
"ENTER. Now continue with the installation in text mode."
msgstr ""
"Si el Hardware es un viejo, Tal vez no se posible realizar una instalación "
"gráfica. En dicho caso, podría intentar una instalación en modo texto. Para "
"llevar a cabo dicho modo, presione ESC durante la primera pantalla de "
"bienvenida y confirme presionando ENTER. Una pantalla negra aparecerá con la "
"palabra \"boot\". Escriba \"text\" y presione ENTER. Ahora continúe con la "
"instalación en modo texto."

#. type: Content of: <section><section><section><section><info><title>
#: en/installer.xml:245
msgid "The Install Freezes"
msgstr "La Instalación se congela"

#. type: Content of: <section><section><section><section><para>
#: en/installer.xml:248
msgid ""
"If the system appeared to freeze during the installation, this may be a "
"problem with hardware detection. In this case the automatic detection of "
"hardware may be bypassed and dealt with later. To try this, type "
"<code>noauto</code> at the prompt. This option may also be combined with "
"other options as necessary."
msgstr ""
"Si el sistema parece congelarse durante la instalación, puede ser un "
"problema con la detección de hardware. En este caso, la detección automática "
"de hardware se puede desactivar y configurarse después. Para probar esto, "
"escriba <code>noauto</code> en la terminal.  Esta opción puede ser combinada "
"con otras si es necesario."

#. type: Content of: <section><section><section><section><info><title>
#: en/installer.xml:257
msgid "RAM problem"
msgstr "Problema de RAM"

#. type: Content of: <section><section><section><section><para>
#: en/installer.xml:260
msgid ""
"These will rarely be needed, but in some cases the hardware may report the "
"available RAM incorrectly. To specify this manually, you can use the "
"<code>mem=xxxM</code> parameter, where xxx is the correct amount of RAM. e."
"g. <code>mem=256M</code> would specify 256MB of RAM."
msgstr ""
"Es raro que lo necesite, pero en algunos casos, el hardware puede informar "
"erróneamente de la cantidad de RAM disponible. Para especificarla "
"manualmente, puede usar el parámetro <code>mem=xxxM</code>, donde xxx es la "
"cantidad correcta de RAM, por ejemplo: <code>mem=256M</code> significaría "
"256MB de RAM."

#. type: Content of: <section><section><section><section><info><title>
#: en/installer.xml:269
msgid "Dynamic partitions"
msgstr "Particiones dinámicas"

#. type: Content of: <section><section><section><section><para>
#: en/installer.xml:272
msgid ""
"If you converted your hard disk from \"basic\" format to \"dynamic\" format "
"on Microsoft Windows, you must know that it is impossible to install Mageia "
"on this disc. To go back to a basic disk, see the Microsoft documentation: "
"<link ns2:href=\"http://msdn.microsoft.com/en-us/library/cc776315.aspx"
"\">http://msdn.microsoft.com/en-us/library/cc776315.aspx</link>."
msgstr ""
"Si usted convirtió su disco duro de formato \"básico\" a \"dinámico\" en "
"Microsoft Windows, debe saber que será imposible instalar Mageia en este "
"disco. Para volver a un disco básico vea la documentación de Microsoft: "
"<link ns2:href=\"http://msdn.microsoft.com/en-us/library/cc776315.aspx"
"\">http://msdn.microsoft.com/en-us/library/cc776315.aspx</link>."

#. type: Content of: <section><info><title>
#: en/installUpdates.xml:3
msgid "Updates"
msgstr "Actualizaciones"

#.  Made by marja on 2012 03 30 
#.  NEEDS TO BE REVIEWED! 
#.  marja 20120418 removed xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg"" from section tag, trying to restore correct html filename
#.  marja, 2012-04-24 added screenshot 
#. type: Content of: <section><mediaobject>
#: en/installUpdates.xml:13
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></imagedata> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"../es/dx2-installUpdates."
"png\" align=\"center\" xml:id=\"installUpdates-im1\" format=\"PNG\" /> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/installUpdates.xml:19
msgid ""
"Since this version of <application>Mageia</application> was released, some "
"packages will have been updated or improved."
msgstr ""
"Desde que se lanzara esta versión de <application>Mageia</application>, se "
"han actualizado o mejorado algunos paquetes."

#. type: Content of: <section><para>
#: en/installUpdates.xml:23
msgid ""
"Choose <guilabel>yes</guilabel> if you wish to download and install them, "
"select <guilabel>no</guilabel> if you don't want to do this now, or if you "
"aren't connected to the Internet"
msgstr ""
"Elija <guilabel>Sí</guilabel> si quiere instalarlas, elija <guilabel>No</"
"guilabel> si no quiere hacerlo ahora, o si no está conectado a Internet"

#. type: Content of: <section><para>
#: en/installUpdates.xml:28
msgid "Then press <guibutton>Next</guibutton> to continue"
msgstr "Luego, pulse <guibutton>Siguiente</guibutton> para continuar."

#. type: Content of: <section><info><title>
#: en/media_selection.xml:3
msgid "Media Selection (Nonfree)"
msgstr "Selección de medio (Nonfree)"

#.  papoteur 2013-04-11  - created 
#.  marja 2013-04-16 added screenshot + made title longer (because it was the same as for add_supplemental_media)
#.  marja 2013-04-16 s/in/during/ as suggested by Tristan Campbell 
#. marja 2013-04-17 s/xml:id="media-selection"/xml:id="media_selection"/ (html filename was wrong)
#. type: Content of: <section><mediaobject>
#: en/media_selection.xml:12
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png"
"\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png"
"\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/media_selection.xml:18
msgid ""
"Here you have the list of available repositories. Not all repositories are "
"available, according to which media you use for installing. The repositories "
"selection determines which packages will be available for selection during "
"the next steps."
msgstr ""
"Aquí tiene una lista de los repositorios disponibles. No todos los "
"repositorios están disponibles, dependiendo de qué medio utilice para la "
"instalación. La selección de repositorios determina qué paquetes podrán ser "
"elegidos en los próximos pasos."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:25
msgid ""
"The <emphasis>Core</emphasis> repository cannot be disabled as it contains "
"the base of the distribution."
msgstr ""
"El repositorio <emphasis>Core</emphasis> no puede ser deshabilitado ya que "
"contiene la base de la distribución."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:30
msgid ""
"The <emphasis>Nonfree</emphasis> repository includes packages that are free-"
"of-charge, i.e. Mageia may redistribute them, but they contain closed-source "
"software (hence the name - Nonfree). For example this repository includes "
"nVidia and ATI graphics card proprietary drivers, firmware for various WiFi "
"cards, etc."
msgstr ""
"El repositorio <emphasis>Nonfree</emphasis> incluye paquetes que son gratis, "
"es decir, Mageia puede redistribuirlos, pero que contienen software de "
"código cerrado, de aquí el nombre Nonfree. Por ejemplo, este repositorio "
"incluye controladores propietarios de tarjetas gráficas nVidia y ATI, "
"firmware para diversas tarjetas WiFi, etc."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:38
msgid ""
"The <emphasis>Tainted</emphasis> repository includes packages released under "
"a free license. The main criteria for placing packages in this repository is "
"that they may infringe patents and copyright laws in some countries, e.g. "
"Multimedia codecs needed to play various audio/video files; packages needed "
"to play commercial video DVD, etc."
msgstr ""
"El repositorio <emphasis>Tainted</emphasis> incluye paquetes liberados bajo "
"una licencia libre. El criterio principal para poner paquetes en este "
"repositorio es que pueden infringir patentes y leyes de derechos de autor en "
"algunos países, como por ejemplo codecs multimedia necesarios para "
"reproducir ciertos archivos de audio/vídeo, paquetes necesarios para "
"reproducir DVD de video comercial, etc."

#. type: Content of: <section><info><title>
#: en/minimal-install.xml:3
msgid "Minimal Install"
msgstr "Instalación mínima."

#. type: Content of: <section><para>
#: en/minimal-install.xml:9
msgid ""
"You can choose a Minimal Installation by de-selecting everything in the "
"Package Group Selection screen, see <xref linkend=\"choosePackageGroups\"></"
"xref>."
msgstr ""
"Puede elegir la instalación mínima deseleccionando todo en la pantalla de "
"Selección de Grupos de Paquetes, vea <xref linkend=\"choosePackageGroups\"></"
"xref>."

#. type: Content of: <section><para>
#: en/minimal-install.xml:10
msgid ""
"Minimal Installation is intended for those with specific uses in mind for "
"their <application>Mageia</application>, such as a server or a specialised "
"workstation. You will probably use this option combined with Manual Package "
"Selection, see <xref linkend=\"choosePackagesTree\"></xref>."
msgstr ""
"La instalación mínima está dirigida a aquellos que tienen en mente usos "
"específicos para su <application>Mageia</application>, como un servidor o "
"una estación de trabajo especializada. Probablemente usará esta opción junto "
"con la seleccion de paquetes manual, vea <xref linkend=\"choosePackagesTree"
"\"></xref>."

#. type: Content of: <section><para>
#: en/minimal-install.xml:14
msgid ""
"If you choose this installation class, then the related screen will offer "
"you a few useful extras to install, such as documentation and X."
msgstr ""
"Si selecciona este tipo de instalación, la siguiente pantalla le ofrecerá "
"algunos extras útiles para instalar, como documentación y las X."

#. type: Content of: <section><mediaobject>
#: en/minimal-install.xml:19
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></imagedata> "
"</imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></imagedata> "
"</imageobject>"

#. type: Content of: <section><info><title>
#: en/misc-params.xml:3
msgid "Summary of miscellaneous parameters"
msgstr "Resumen de la Configuración"

#.  Started by marja on 2012 03 31 
#.  NEEDS TO BE WRITTEN AND REVIEWED! 
#. marja - 2012 04 15 added some text, not much, unfortunately :( 
#. marja 2012-04-24 added screenshots 
#. JohnR 2012-04-25 Added text as requested by Psec :-)
#. marja 2012-04-24 added 2 links to other help pages 
#. marja 2012-04-24 added some text in the drakxid-configureServices and 
#.       the drakxid-miscellaneous section 
#. marja 2012-04-24 corrected "Magaia" in the last paragraph 
#. marja 2012-04-24 corrected para xml:id number in the last paragraph 
#.  2012-05-01 marja - added You-Cheng Hsieh's section about IBus etc. 
#.  2012-08-09 marja - replaced linkend="setupBootloaderBeginner" by linkend="setupBootloader" 
#. 2012-12-25 marja - moved configureTimezoneUTC, selectCountry, configureServices and SecurityLevel out to separate files
#. type: Content of: <section><mediaobject>
#: en/misc-params.xml:33
msgid ""
"<imageobject> <imagedata fileref=\"dx2-summary.png\" revision=\"1\" align="
"\"center\" format=\"PNG\" xml:id=\"summary-im1\" /> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-summary.png\" revision=\"1\" align="
"\"center\" format=\"PNG\" xml:id=\"summary-im1\" /> </imageobject>"

#. type: Content of: <section><para>
#: en/misc-params.xml:38
msgid ""
"DrakX made smart choices for the configuration of your system depending on "
"the choices you made and on the hardware DrakX detected. You can check the "
"settings here and change them if you want after pressing "
"<guibutton>Configure</guibutton>."
msgstr ""
"DrakX elige inteligentemente la configuración para su sistema dependiendo "
"del hardware que ha detectado.  Puede comprobar la configuración aquí y "
"cambiarla si quiere pulsando <guibutton>Configurar</guibutton>."

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:45
msgid "System parameters"
msgstr "Configuraciones del sistema"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:50
msgid "<guilabel>Timezone</guilabel>"
msgstr "<guilabel>Huso horario</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:52
msgid ""
"DrakX selected a time zone for you, depending on your preferred language. "
"You can change it if needed. See also <xref linkend=\"configureTimezoneUTC\"/"
">"
msgstr ""
"DrakX le elige un huso horario dependiendo del idioma seleccionado. Puede "
"cambiarlo si lo necesita, Vea también <xref linkend=\"configureTimezoneUTC\"/"
">"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:58
msgid "<guilabel>Country / Region</guilabel>"
msgstr "<guilabel>País / Región</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:61
msgid ""
"If you are not in the selected country, it is very important that you "
"correct the setting. See <xref linkend=\"selectCountry\"/>"
msgstr ""
"Si no está en el país seleccionado, es importante que lo corrijas. Vea <xref "
"linkend=\"selectCountry\"/>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:67
msgid "<guilabel>Bootloader</guilabel>"
msgstr "<guilabel>Cargador de arranque</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:69
msgid "DrakX has made good choices for the bootloader setting."
msgstr "DrakX ha hecho una buena elección para el cargador del arranque."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:72
msgid ""
"Do not change anything, unless you know how to configure Grub and/or Lilo"
msgstr "No cambie nada, salvo que sepa configurar Grub y/o Lilo."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:75
msgid "For more information, see <xref linkend=\"setupBootloader\"/>"
msgstr "Para más información, vea <xref linkend=\"setupBootloader\"/>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:80
msgid "<guilabel>User management</guilabel>"
msgstr "<guilabel>Administración de usuarios</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:83
msgid ""
"You can add extra users here. They will each get their own <literal>/home</"
"literal> directories."
msgstr ""
"Aquí puede añadir más usuarios. Cada uno tendrá su propio directorio "
"<literal>/home</literal>."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:89
msgid "<guilabel>Services</guilabel>:"
msgstr "<guilabel>Servicios</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:91
msgid ""
"System services refer to those small programs which run the background "
"(daemons). This tool allows you to enable or disable certain tasks."
msgstr ""
"Los Servicios del sistema se refieren a esos pequeños programas que "
"funcionan en segundo plano (conocidos como \"demonios\"). Esta herramienta "
"le permite activar o desactivar algunos de ellos."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:95
msgid ""
"You should check carefully before changing anything here - a mistake may "
"prevent your computer from operating correctly."
msgstr ""
"Debe de pensar con mucho cuidado antes de cambiar nada aquí, una "
"equivocación puede hacer que su ordenador no funcione correctamente."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:99
msgid "For more information, see <xref linkend=\"configureServices\"/>"
msgstr ""
"Para obtener más información, consulte <xref linkend=\"configureServices\"/>"

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:106
msgid "Hardware parameters"
msgstr "Configuraciones de hardware"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:111
msgid "<guilabel>Keyboard</guilabel>:"
msgstr "<guilabel>Teclado</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:113
msgid ""
"This is where you setup or change your keyboard layout which will depend on "
"your location, language or type of keyboard."
msgstr ""
"Aquí es donde puede configurar o cambiar la disposición de su teclado, que "
"dependerá de su localización, lenguaje o tipo de teclado."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:119
msgid "<guilabel>Mouse</guilabel>:"
msgstr "<guilabel>Ratón</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:121
msgid ""
"Here you can add or configure other pointing devices, tablets, trackballs "
"etc."
msgstr ""
"Aquí puede añadir o configurar otros dispositivos señaladores, tablets, "
"trackballs, etc."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:126
msgid "<guilabel>Sound card</guilabel>:"
msgstr "<guilabel>Tarjeta de sonido</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:129
msgid ""
"The installer uses the default driver, if there is a default one. The option "
"to select a different driver is only given when there is more than one "
"driver for your card, but none of them is the default one."
msgstr ""
"El instalador usa el driver por defecto, si hay alguno. La opción de escoger "
"uno diferente aparece solamente cuando hay más de un driver para su tarjeta "
"pero ninguno es el que viene por defecto."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:136
msgid "<guilabel>Graphical interface</guilabel>:"
msgstr "<guilabel>Interfaz gráfica</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:139
msgid "This section allows you to configure your graphic card(s) and displays."
msgstr ""
"Esta sección le permite configurar sus tarjeta(s) gráficas y pantallas."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:142
msgid "For more information, see <xref linkend=\"configureX_chooser\"/>."
msgstr "Para más información, vea <xref linkend=\"configureX_chooser\"/>."

#. type: Content of: <section><section><mediaobject>
#: en/misc-params.xml:148
msgid ""
"<imageobject> <imagedata xml:id=\"summaryBottom-im1\" revision=\"1\" align="
"\"center\" format=\"PNG\" fileref=\"dx2-summaryBottom.png\" /> </imageobject>"
msgstr ""
"<imageobject> <imagedata xml:id=\"summaryBottom-im1\" revision=\"1\" align="
"\"center\" format=\"PNG\" fileref=\"dx2-summaryBottom.png\" /> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:156
msgid "Network and Internet parameters"
msgstr "Configuraciones de redes e Internet"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:162
msgid "<guilabel>Network</guilabel>:"
msgstr "<guilabel>Red</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:164
msgid ""
"You can configure your network here, but for network cards with non-free "
"drivers it is better to do that after reboot, in the <application>Mageia "
"Control Center</application>, if you have not yet enabled the Nonfree media "
"repositories."
msgstr ""
"Puede configurar su red aquí, pero para tarjetas de red sin controladores "
"libres (nonfree), es mejor hacerlo después de reiniciar, en el "
"<application>Centro de Control de Mageia</application>, después de tener "
"activados los repositorios non-free."

#. type: Content of: <section><section><itemizedlist><listitem><warning><para>
#: en/misc-params.xml:171
msgid ""
"When you add a network card, do not forget to set your firewall to watch "
"that interface as well."
msgstr ""
"Cuando añada una tarjeta de red, no olvide configurar el cortafuegos para "
"que también la controle."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:178
msgid "<guilabel>Proxies</guilabel>:"
msgstr "<guilabel>Servidores proxy</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:180
msgid ""
"A Proxy Server acts as an intermediary between your computer and the wider "
"internet.  This section allows you to configure your computer to utilize a "
"proxy service."
msgstr ""
"Un servidor proxy actúa como un intermediario entre su ordenador e Internet. "
"Esta sección le permite configurar su ordenador para usar un servicio de "
"proxy."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:185
msgid ""
"You may need to consult your systems administrator to get the parameters you "
"need to enter here"
msgstr ""
"Puede que necesite consultar a su administrador de sistemas para obtener los "
"parámetros que debe poner aquí."

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:194
msgid "Security"
msgstr "Seguridad"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:199
msgid "<guilabel>Security Level</guilabel>:"
msgstr "<guilabel>Nivel de seguridad</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:202
msgid ""
"Here you set the Security level for your computer, in most cases the default "
"setting (Standard) is adequate for general use."
msgstr ""
"Aquí puede configurar el nivel de seguridad que desee para su ordenador, en "
"la mayoría de los casos, la configuración por defecto (Estándar) es adecuada "
"para un uso general."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:206
msgid "Check the option which best suits your usage."
msgstr "Marque la opción que se ajuste mejor al uso que le dé a su ordenador."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:211
msgid "<guilabel>Firewall</guilabel>:"
msgstr "<guilabel>Cortafuegos</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:213
msgid ""
"A firewall is intended to be a barrier between your important data and the "
"rascals out there on the internet who would compromise or steal it."
msgstr ""
"El propósito de un cortafuegos es ser una barrera entre sus archivos "
"importantes y la gente malintencionada que pulula por Internet, quienes "
"pueden intentar robar o comprometer sus archivos."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:217
msgid ""
"Select the services that you wish to have access to your system. Your "
"selections will depend on what you use your computer for."
msgstr ""
"Seleccione los servicios a los que quiere tener acceso en su sistema. Su "
"selección dependerá del uso que haga de su ordenador."

#. type: Content of: <section><section><itemizedlist><listitem><warning><para>
#: en/misc-params.xml:222
msgid "Bear in mind that allowing everything (no firewall) may be very risky."
msgstr ""
"¡Tenga en cuenta de que permitiendo todo (sin cortafuegos) puede ser muy "
"peligroso!"

#. type: Content of: <section><info><title>
#: en/resizeFATChoose.xml:16
msgid ""
"Resize <application>Windows<superscript>®</superscript></application> "
"partition"
msgstr ""
"Cambiando el tamaño de la partición <application>Windows<superscript>®</"
"superscript></application>"

#. type: Content of: <section><para>
#: en/resizeFATChoose.xml:20
msgid ""
"You have more than one <application>Windows<superscript>®</superscript></"
"application> partition.  Choose which one should be made smaller to make "
"space for installing <application>Mageia</application>."
msgstr ""
"Si tiene más de una partición de <application>Windows<superscript>®</"
"superscript></application> , elija cuál quiere hacer más pequeña para hacer "
"espacio para instalar <application>Mageia</application>."

#. type: Content of: <section><info><title>
#: en/securityLevel.xml:12
msgid "Security Level"
msgstr "Nivel de seguridad"

#.  2012-12-25 marja - moved this part out of misc-params.xml" 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/securityLevel.xml:19
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/securityLevel.xml:24
msgid "You can adjust your security level here."
msgstr "Aquí puede ajustar su nivel de seguridad."

#. type: Content of: <section><para>
#: en/securityLevel.xml:27
msgid ""
"Leave the default settings as they are, if you don't know what to choose."
msgstr "Si no sabe qué elegir, deje la configuración por defecto como está."

#. type: Content of: <section><para>
#: en/securityLevel.xml:30
msgid ""
"After install, it will always be possible to adjust your security settings "
"in the <guilabel>Security</guilabel> part of the Mageia Control Center."
msgstr ""
"Después de instalar, siempre será posible cambiar sus ajustes de seguridad "
"en la parte de <guilabel>Seguridad</guilabel> del Centro de Control de "
"Mageia."

#. type: Content of: <section><info><title>
#: en/SelectAndUseISOs2.xml:4
msgid "Select and use ISOs"
msgstr "Seleccione y use una ISO"

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:8
msgid "Media"
msgstr "Medio"

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:11
msgid "Definition"
msgstr "Definicion"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:13
msgid ""
"We call a media here a ISO image file that allows to install and/or update "
"Mageia and by extension any physical support where the ISO file is copied."
msgstr ""
"Aquí llamamos medio a un archivo de imagen ISO que permite instalar y/o "
"actualizar Mageia y por extensión a cualquier soporte físico dónde el "
"archivo ISO sea copiado."

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:17
msgid ""
"You can find them <link ns4:href=\"http://www.mageia.org/en/downloads/"
"\">here</link>."
msgstr ""
"Los puede encontar<link ns4:href=\"http://www.mageia.org/en/downloads/"
"\">aquí</link>."

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:21
msgid "Classical installation media"
msgstr "Medio de instalación clásico."

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:24 en/SelectAndUseISOs2.xml:92
#: en/SelectAndUseISOs2.xml:199
msgid "Common features"
msgstr "Caracterśticas comunes."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:28
msgid "They use the traditional installer called drakx."
msgstr "Usan el instalador tradicional llamado \"drakx\"."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:32
msgid ""
"They are able to make a clean install or an update from previous releases."
msgstr ""
"Son capaces de hacer una instalación limpia o una actualización de "
"lanzamientos previos."

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:39
msgid "DVD"
msgstr "DVD"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:43 en/SelectAndUseISOs2.xml:107
#: en/SelectAndUseISOs2.xml:171 en/SelectAndUseISOs2.xml:189
#: en/SelectAndUseISOs2.xml:217
msgid "Different media for architecture 32 or 64 bits."
msgstr "Medios diferentes para arquitecturas de 32 o 64 bits."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:47
msgid ""
"Some tools are available in the Welcome screen: Rescue System, Memory Test, "
"Hardware Detection Tool."
msgstr ""
"Algunas herramientas están disponibles en la pantalla de bienvenida: Sistema "
"de Rescate, Prueba de Memoria, Herramienta de Detección de Hardware."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:52
msgid "Each DVD contains any available desktop environments and languages."
msgstr ""
"Cada DVD contiene todos los entornos de escritorio y lenguajes disponibles."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:57
msgid ""
"You'll be given the choice during the installation to add or not non free "
"software."
msgstr ""
"Se le dará la opción durante la instalación de agregar o no software no "
"libre."

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:64
msgid "DVD dual arch"
msgstr "DVD dual arch"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:68
msgid ""
"Both architectures are present on the same media, the choice is made "
"automatically according to the detected CPU."
msgstr ""
"Ambas arquitecturas están presentes en el mismo medio, la ellección se "
"realiza automáticamente de acuerdo al CPU detectado."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:73
msgid "Xfce desktop only."
msgstr "Sólo Escritorio Xfce."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:77
msgid ""
"Some languages only (be, bg, ca, de, en, es, fr, it, mk, pl, pt, ru, sv, uk) "
"TO BE CHECKED!"
msgstr ""
"Sólo algunos lenguajes (be, bg, ca, de, en, es, fr, it, mk, pl, pt, ru, sv, "
"uk) PARA REVISAR!"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:82
msgid "It contains non free software."
msgstr "Contiene software no libre"

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:89
msgid "Live media"
msgstr "Medio Live"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:96
msgid ""
"Can be used to preview the distribution without first installing it on a "
"HDD, and optionally install Mageia on your HDD."
msgstr ""
"Puede ser utilizado para probar la distribución sin haberla instalado "
"previamente en un disco rígido y , opcionalmente, instalar Mageia en su "
"disco rígido."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:102
msgid "ISO contains only one desktop environment (KDE or GNOME)."
msgstr "El ISO solo contiene un entorno de escritorio (KDE o GNOME)"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:111
msgid ""
"<emphasis role=\"bold\">Live ISOs can only be used to create clean "
"installations, they cannot be used to upgrade from previous releases.</"
"emphasis>"
msgstr ""
"<emphasis role=\"bold\">las imágenes ISO Vivas sólo pueden ser utilizadas "
"para crear instalaciones limpias, no pueden utilizarse para actualizar desde "
"versiones previas.</emphasis>"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:117
msgid "They contains non free software."
msgstr "Ellos contienen software no libre."

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:123
msgid "Live CD KDE"
msgstr "Live CD KDE"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:127 en/SelectAndUseISOs2.xml:163
msgid "KDE desktop environment only."
msgstr "Sólo entorno de escritorio KDE."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:131 en/SelectAndUseISOs2.xml:149
#: en/SelectAndUseISOs2.xml:221
msgid "English language only."
msgstr "Sólo idioma Inglés."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:135 en/SelectAndUseISOs2.xml:153
msgid "32 bits only."
msgstr "Sólo 32 bits."

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:141
msgid "Live CD GNOME"
msgstr "Live CD GNOME"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:145 en/SelectAndUseISOs2.xml:181
msgid "GNOME desktop environment only."
msgstr "Sólo entorno de escritorio GNOME."

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:159
msgid "Live DVD KDE"
msgstr "Live DVD KDE"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:167 en/SelectAndUseISOs2.xml:185
msgid "All languages are present."
msgstr "Todos los idiomas presentes."

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:177
msgid "Live DVD GNOME"
msgstr "Live DVD GNOME"

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:196
msgid "Boot-only CDs media"
msgstr "Medio CD sólo de arranque"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:203
msgid ""
"Each one is a small image that contains no more than that which is needed to "
"start the drakx installer and find the ISO file to continue and complete the "
"install. These ISO files may be on the PC hard disk, on a local drive, on a "
"local network or on the Internet."
msgstr ""
"Cada una es una imágen pequeña que contiene sólo lo necesario para iniciar "
"el programa de instalación drakx y encontrar el archivo ISO para continuar y "
"completar la instalación. Estos archivos ISO pueden estar en el disco rígido "
"de la PC, en un disco local, en una red local o en Internet."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:211
msgid ""
"These media are very light (less than 100 Mo) and are convenient when "
"bandwidth is too low to download a full DVD, PC without DVD drive or PC that "
"can't boot on a USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:227
msgid "boot.iso"
msgstr "boot.iso"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:231
msgid "Contains only free software, for people who refuse non free software."
msgstr ""
"Contiene sólo software libre, para todos aquellos que rehusan del software "
"propietario."

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:238
msgid "boot-nonfree.iso"
msgstr "boot-nonfree.iso"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:242
msgid ""
"Contains non free software (mostly drivers, codecs...) for people who need "
"it."
msgstr ""
"Contiene software propietario (mayormente drivers, codecs, etc.) para "
"aquellos que lo necesiten."

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:251
msgid "Media downloading and checking"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:254
msgid "Downloading"
msgstr "Descargando"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:256
msgid ""
"Once you have chosen your ISO file, you can download it either using http or "
"BitTorrent. In both cases, a window give you some information, like the used "
"mirror and the possibility to change if the bandwidth is to low. If http is "
"chosen, you can also see something like"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:263
msgid ""
"<imageobject> <imagedata fileref=\"Checking.png\" contentwidth=\"650\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"Checking.png\" contentwidth=\"650\"/> </"
"imageobject>"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:268
msgid ""
"md5sum and sha1sum are tools to check your ISO integrity. Use only one of "
"them. Both hexadecimal numbers have been calculated by an algorithm from the "
"file to be downloaded. If you ask this algorithm to calculate again this "
"number from your downloaded file, either you have the same number and your "
"downloaded file is correct, or the number is different and you met a "
"failure. Then this window appears:"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:276
msgid "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:281
msgid "Check the radio button Save File."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:285
msgid "Checking the downloaded media integrity"
msgstr "Verificar integridad del medio descargado"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:287
msgid "Open a console, no need to be root, and:"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:289
msgid ""
"- To use md5sum, type: [sam@localhost]$ <userinput>md5sum path/to/the/image/"
"file.iso</userinput>."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:292
msgid ""
"- To use sha1sum, type: [sam@localhost]$ <userinput>sha1sum path/to/the/"
"image/file.iso</userinput>."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:295
msgid ""
"and compare the obtained number on your computer (you may have to wait for a "
"while) with the number given by Mageia. Example:"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:299
msgid ""
"<imageobject> <imagedata fileref=\"Md5sum.png\" contentwidth=\"650\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"Md5sum.png\" contentwidth=\"650\"/> </"
"imageobject>"

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:309
msgid "Burn or dump the ISO"
msgstr "Grabar o volcar el ISO"

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:311
msgid ""
"The checked ISO can now be burned on a CD or DVD or dumped on a USB stick. "
"These operations are not a simple copy and aim at make a boot-able media."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:316
msgid "Burn the ISO on a CD/DVD"
msgstr "Grabar el ISO en un CD/DVD"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:318
msgid ""
"Use whatever burner you want but ensure the burning device is set correctly "
"to <emphasis role=\"bold\">burn an image</emphasis>, burn data or files is "
"not correct.  More information in <link ns4:href=\"https://wiki.mageia.org/"
"en/Writing_CD_and_DVD_images\">the Mageia wiki</link>."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:324
msgid "Dump the ISO on a USB stick"
msgstr "Volvar el ISO en un USB"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:326
msgid ""
"All Mageia ISOs are hybrid, which means you can 'dump' them on a USB stick "
"and use it to boot and install the system."
msgstr ""

#. type: Content of: <section><section><section><warning><para>
#: en/SelectAndUseISOs2.xml:330
msgid ""
"\"dumping\" an image onto a flash device destroys any prior file-system in "
"the partition; any data will be lost and partition capacity will be reduced "
"to the image size."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:335
msgid "To recover the original capacity, you have to format the USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:339
msgid "Using Mageia"
msgstr "Usando Mageia"

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:341
msgid ""
"You can use a graphical tool like <link ns4:href=\"https://wiki.mageia.org/"
"en/IsoDumper_Writing_ISO_images_on_USB_sticks\">IsoDumper</link>"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:343
msgid "You can also use the dd tool in a console:"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:347
msgid "Open a console"
msgstr "Abrir consola"

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:351
msgid ""
"Become root with the command <userinput>su -</userinput> (don't forget the "
"final -)"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject>
#: en/SelectAndUseISOs2.xml:355
msgid ""
"<imageobject> <imagedata fileref=\"Root.png\" contentwidth=\"650\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"Root.png\" contentwidth=\"650\"/> </"
"imageobject>"

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:362
msgid ""
"Plug your USB stick (do not mount it, that means do not open any application "
"or file manager that read it)"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:367
msgid "Enter the command <userinput>fdisk -l</userinput>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject>
#: en/SelectAndUseISOs2.xml:370
msgid ""
"<imageobject> <imagedata fileref=\"Fdisk.png\" contentwidth=\"650\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"Fdisk.png\" contentwidth=\"650\"/> </"
"imageobject>"

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:377
msgid ""
"Find the device name for your USB stick (by its size), for example /dev/sdb "
"in the screenshot above, it is a 8Go USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:383
msgid ""
"Enter the command: # <userinput>dd if=path/to/the/ISO/file of=/dev/sdX "
"bs=1M</userinput>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:386
msgid ""
"(x)=your device name eg: /dev/sdc Example: # <userinput>dd if=/home/user/"
"Downloads/Mageia-4-x86_64-DVD.iso of=/dev/sdb bs=1M</userinput>"
msgstr ""
"(x)=nombre de tu dispositivo ej: /dev/sdc Ejemplo: # <userinput>dd if=/home/"
"user/Downloads/Mageia-4-x86_64-DVD.iso of=/dev/sdb bs=1M</userinput>"

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:392
msgid "Enter the command: # <userinput>sync</userinput>"
msgstr "Introduce el comando: # <userinput>sync</userinput>"

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:396
msgid "Unplug your USB stick, it is done"
msgstr "Desconecta tu pendrive USB, esta echo"

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:402
msgid "Using Windows"
msgstr "Usando Windows"

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:404
msgid "You can try:"
msgstr "Puedes probar:"

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:406
msgid "- <link ns4:href=\"http://rufus.akeo.ie/?locale=en_US\">Rufus</link>"
msgstr "- <link ns4:href=\"http://rufus.akeo.ie/?locale=en_US\">Rufus</link>"

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:408
msgid ""
"- <link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 "
"Disk Imager</link>"
msgstr ""
"- <link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 "
"Disco de Imagenes</link>"

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:416
msgid "Mageia Installation"
msgstr "Insatlación de Mageia"

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:418
msgid ""
"This step is detailed in <link ns4:href=\"http://www.mageia.org/en/doc/"
"\">the Mageia documentation</link>."
msgstr ""

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:420
msgid ""
"More information, is available in <link ns4:href=\"https://wiki.mageia.org/"
"en/Category:Documentation\">the Mageia wiki</link>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectCountry.xml:13
msgid "Select your Country / Region"
msgstr "Seleccione su país / Región"

#.  2012-12-25 marja - moved this section out of misc-params 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/selectCountry.xml:21
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-selectCountry.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"selectCountry-im1\"></imagedata> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-selectCountry.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"selectCountry-im1\"></imagedata> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/selectCountry.xml:27
msgid ""
"Select your country or region. This is important for all kinds of settings, "
"like the currency and wireless regulatory domain. Setting the wrong country "
"can lead to not being able to use a Wireless network."
msgstr ""
"Seleccione su país o región. Es importante para todos los ajustes, como la "
"moneda y la regulación inalámbrica. Si configura un país erróneo puede que "
"no pueda usar la conexión inalámbrica."

#. type: Content of: <section><para>
#: en/selectCountry.xml:32
msgid ""
"If your country isn't in the list, click the <guilabel>Other Countries</"
"guilabel> button and choose your country / region there."
msgstr ""
"Si su país no se encuentra en la lista, haga click en <guilabel>Otros "
"Países</guilabel> y elija su país / región allí."

#. type: Content of: <section><note><para>
#: en/selectCountry.xml:37
msgid ""
"If your country is only in the <guilabel>Other Countries</guilabel> list, "
"after clicking <guibutton>OK</guibutton> it may seem a country from the "
"first list was chosen. Please ignore this, DrakX will follow your real "
"choice."
msgstr ""
"Si su país está únicamente en la lista de <guilabel>Otros Países</guilabel>, "
"después de pulsar <guibutton>OK</guibutton> puede aparecer otro país de la "
"primera lista como si lo hubiera elegido. Por favor, ignore esto, DrakX "
"seguirá su elección real."

#. type: Content of: <section><section><info><title>
#: en/selectCountry.xml:46
msgid "Input method"
msgstr "Método de entrada"

#. type: Content of: <section><section><para>
#: en/selectCountry.xml:49
msgid ""
"In the <guilabel>Other Countries</guilabel> screen you can also select an "
"input method (at the bottom of the list). Input methods allow users to input "
"multilingual characters (Chinese, Japanese, Korean, etc). IBus is the "
"default input method in Mageia DVDs, Africa/India and Asia/no-India Live-"
"CDs. For Asian and African locales, IBus will be set as default input method "
"so users should not need to configure it manually. Other input methods(SCIM, "
"GCIN, HIME, etc) also provide similar functions and can be installed if you "
"added HTTP/FTP media before package selection."
msgstr ""
"En la pantalla de <guilabel>Otros Países</guilabel> también puede "
"seleccionar un método de entrada (al final de la lista). Los métodos de "
"entrada permiten a los usuarios introducir carácteres de múltiples lenguas "
"(Chino, Japonés, Coreano, etc.). IBus es el método por defecto en los DVDs "
"de Mageia, África/India y Asia/no-India Live-CDs. Para las localizaciones "
"asiáticas y africanas, IBus se configurará como método de entrada por lo que "
"los usuarios no deberán de configurarlo manualmente. Otros métodos de "
"entrada (SCIM, GCIN, HIME, etc) también proveen funciones similares y pueden "
"instalarse si añadió medios HTTP/FTP antes de la selección de paquetes."

#. type: Content of: <section><section><note><para>
#: en/selectCountry.xml:61
msgid ""
"If you missed the input method setup during installation, you can access it "
"after you boot your installed system via \"Configure your Computer\" -&gt; "
"\"System\", or by running localedrake as root."
msgstr ""
"Si durante la instalación olvidó configurar el método de entrada, puede "
"hacerlo cuando su sistema esté instalado, entrando en \"Configure su "
"computador\" -> \"Sistema\" o ejecutando localdrake como root."

#. type: Content of: <section><info><title>
#: en/selectInstallClass.xml:21
msgid "Install or Upgrade"
msgstr "Instalar o actualizar"

#. type: Content of: <section><mediaobject>
#: en/selectInstallClass.xml:25
msgid ""
"<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" align="
"\"center\" format=\"PNG\"></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" align="
"\"center\" format=\"PNG\" /> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:32
msgid "Install"
msgstr "Instalación"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:34
msgid ""
"Use this option for a fresh <application>Mageia</application> installation."
msgstr ""
"Use esta opción para una nueva instalación de <application>Mageia</"
"application>."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:39
msgid "Upgrade"
msgstr "Actualización"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:41
msgid ""
"If you have one or more <application>Mageia</application> installations on "
"your system, the installer will allow you to upgrade one of them to the "
"latest release."
msgstr ""
"Si tiene una o más versiones de <application>Mageia</application> instaladas "
"en su sistema, el instalador le permitirá actualizar una de ellas a la "
"última versión."

#. type: Content of: <section><itemizedlist><listitem><warning><para>
#: en/selectInstallClass.xml:45
msgid ""
"Only upgrading from a previous Mageia version that was <emphasis>still "
"supported</emphasis> when this installer's version was released, has been "
"thoroughly tested. If you want to upgrade a Mageia version that had already "
"reached its End\tOf Life when this one was released, then it is better to do "
"a clean install while preserving your <literal>/home</literal> partition."
msgstr ""
"Solamente se ha testado la actualización desde una versión de Mageia "
"anterior que <emphasis>todavía está soportada</emphasis> cuando esta versión "
"del instalador se lanzó. Si quiere actualizar una versión de Mageia que ya "
"ha alcanzado su fin de soporte, entonces es mejor hacer una instalación "
"limpia preservando su partición <literal>/home</literal>."

#. type: Content of: <section><note><para>
#: en/selectInstallClass.xml:56
msgid ""
"If during install you decide to stop the installation, it is possible to "
"reboot, but please think twice before you do this. Once a partition has been "
"formatted or updates have started to be installed, your computer isn't in "
"the same state anymore and rebooting it could very well leave you with an "
"unusable system. If in spite of that you are very sure rebooting is what you "
"want, go to a text terminal by pressing the three keys <guilabel>Alt Ctrl "
"F2</guilabel> at the same time. After that, press <guilabel>Alt Ctrl Delete</"
"guilabel> simultaneously to reboot."
msgstr ""
"Si en cualquier momento durante la instalación decide parar el proceso, es "
"posible reiniciar, pero piénselo dos veces. Una vez que una partición ha "
"sido formateada o cuando las actualizaciones han empezado a instalarse, su "
"ordenador no estará en el mismo estado y un reinicio puede dejarle con un "
"sistema inutilizable. No obstante, si decide reiniciar, acceda a la terminal "
"pulsando al mismo tiempo <guibutton>Alt Ctrl F2</guibutton>. Después, pulse "
"<guibutton>Alt Ctrl Delete</guibutton> simultáneamente para reiniciar"

#. type: Content of: <section><tip><para>
#: en/selectInstallClass.xml:67
msgid ""
"If you have discovered that you forgot to select an additional language, you "
"can return from the \"Install or Upgrade\" screen to the language choice "
"screen by pressing <guilabel>Alt Ctrl Home</guilabel>. Do <emphasis>not</"
"emphasis> do this later in the install."
msgstr ""
"Si ha descubierto que se le olvidó seleccionar un idioma adicional, puede "
"volver desde la pantalla de \"Instalar o Actualizar\" a la de selección de "
"Idioma pulsando <guilabel>Alt Ctrl Inicio</guilabel>.  <emphasis>NO</"
"emphasis> haga esto durante la instalación."

#. type: Content of: <section><info><title>
#: en/selectKeyboard.xml:14
msgid "Keyboard"
msgstr "Teclado"

#. type: Content of: <section><para>
#: en/selectKeyboard.xml:17
msgid ""
"DrakX selects an appropriate keyboard for your language. If no suitable "
"keyboard is found it will default to a US keyboard layout."
msgstr ""
"DrakX selecciona el teclado apropiado a su idioma. Si no encuentra ningún "
"teclado compatible, elegirá el teclado estadounidense."

#. type: Content of: <section><mediaobject>
#: en/selectKeyboard.xml:22
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png"
"\" /> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-selectKeyboard.png\" align=\"center"
"\" /> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:30
msgid ""
"Make sure that the selection is correct or choose another keyboard layout. "
"If you don't know which layout your keyboard has, look in the specifications "
"that came with your system, or ask the computer vendor. There may even be a "
"label on the keyboard that identifies the layout. You can also look here: "
"<link xlink:href=\"http://en.wikipedia.org/wiki/Keyboard_layout\">en."
"wikipedia.org/wiki/Keyboard_layout</link>"
msgstr ""
"Asegúrese de que la selección es la correcta o escoja otra distribución del "
"teclado. Si no conoce cuál es la distribución correcta para su teclado, mire "
"en las especificaciones que venían con su sistema o pregunte a su vendedor.  "
"Incluso puede haber una etiqueta en su teclado que la identifique.También "
"puede mirarlo aquí: <link xlink:href=\"http://es.wikipedia.org/wiki/"
"Distribuci%C3%B3n_del_teclado\">es.wikipedia.org/wiki/"
"Distribución_del_teclado</link>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:40
msgid ""
"If your keyboard isn't in the list shown, click on <guibutton>More</"
"guibutton> to get a full list, and select your keyboard there."
msgstr ""
"Si su teclado no está en la lista que aparece, haga click en <guibutton>Más</"
"guibutton> para mostrar una lista completa y seleccionar ahí su teclado."

#. type: Content of: <section><itemizedlist><listitem><para><warning><para>
#: en/selectKeyboard.xml:45
msgid ""
"After choosing a keyboard from the <guibutton>More</guibutton> dialog, "
"you'll return to the first keyboard choice dialog and it will seem as though "
"a keyboard from that screen was chosen. You can safely ignore this anomaly "
"and continue the installation: Your keyboard is the one you chose from the "
"full list."
msgstr ""
"Después de seleccionar un teclado desde la ventana de <guibutton>Más</"
"guibutton>, el instalador volverá a la primera ventana de selección de "
"teclado, y parecerá que ha elegido un teclado de la lista. Puede ignorar "
"esta anomalía y continuar la instalación, su teclado es el que eligió en la "
"lista completa."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:55
msgid ""
"If you choose a keyboard based on non-Latin characters, you will see an "
"extra dialog screen asking how you would prefer to switch between the Latin "
"and non-Latin keyboard layouts"
msgstr ""
"Si selecciona un teclado basado en carácteres no latinos, aparecerá una "
"pantalla extra preguntando como prefiere cambiar entre disposiciones latinas "
"y no latinas."

#. type: Content of: <section><info><title>
#: en/selectLanguage.xml:23
msgid "Please choose a language to use"
msgstr "Por favor elija un idioma"

#. type: Content of: <section><para>
#: en/selectLanguage.xml:26
msgid ""
"Select your preferred language, by first expanding the list for your "
"continent. <application>Mageia</application> will use this selection during "
"the installation and for your installed system."
msgstr ""
"Elija su idioma preferido extendiendo la lista de su continente.  "
"<application>Mageia</application> usará esta selección durante la "
"instalación y para su sistema instalado."

#. type: Content of: <section><para>
#: en/selectLanguage.xml:30
msgid ""
"If it is likely that you will require several languages installed on your "
"system, for yourself or other users, then you should use the "
"<guibutton>Multiple languages</guibutton> button to add them now. It will be "
"difficult to add extra language support after installation."
msgstr ""
"Si necesitara tener varios idiomas instalados para usted u otros usuarios, "
"usa el botón de <guibutton>Múltiples idiomas</guibutton> para añadirlos "
"ahora. Puede ser más difícil añadir soporte en otros idiomas después de la "
"instalación."

#. type: Content of: <section><mediaobject>
#: en/selectLanguage.xml:36
msgid ""
"<imageobject> <imagedata fileref=\"dx2-selectLanguage.png\" align=\"center\" "
"format=\"PNG\" > </imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"../es/dx2-selectLanguage.png\" align="
"\"center\" format=\"PNG\" /> </imageobject>"

#. type: Content of: <section><warning><para>
#: en/selectLanguage.xml:44
msgid ""
"Even if you choose more than one language, you must first choose one of them "
"as your preferred language in the first language screen. It will also be "
"marked as chosen in the multiple languages screen ."
msgstr ""
"Aunque elija más de un idioma, primero debe elegir su idioma preferido en la "
"primera pantalla. También se marcará como elegido en la pantalla de elección "
"de múltiples idiomas."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:51
msgid ""
"If your keyboard language is not the same as your preferred language, then "
"it is advisable to install the language of your keyboard as well."
msgstr ""
"Si su teclado no es de su idioma preferido, es recomendable que instale "
"también el idioma de su teclado."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:57
msgid ""
"Mageia uses UTF-8 (Unicode) support by default. This may be disabled in the "
"\"multiple languages\" screen if you know that it is inappropriate for your "
"language. Disabling UTF-8 applies to all installed languages."
msgstr ""
"Mageia usa el soporte UTF-8 (Unicode) por defecto. Puede ser desactivado en "
"la pantalla de \"multiples idiomas\" si sabe que no funciona con su idioma. "
"Si lo desactiva, no estará disponible para ningún idioma instalado."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:64
msgid ""
"You can change the language of your system after installation in the Mageia "
"Control Center -&gt; System -&gt; Manage localization for your system."
msgstr ""
"Puede cambiar el idioma de su sistema después de la instalación en el Centro "
"de Control de Mageia --&gt; Sistema --&gt; Administrar la localización de su "
"sistema."

#. type: Content of: <section><info><title>
#: en/selectMouse.xml:4
msgid "Select mouse"
msgstr "Elección del ratón"

#.  Made by marja on 2012 04 11 
#.  NEEDS TO BE REVIEWED! 
#.  adding some "real" text now that we know the page shows up in the right place
#.  marja 2012-04-24 adding screenshot 
#. type: Content of: <section><mediaobject>
#: en/selectMouse.xml:16
msgid ""
"<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" "
"format=\"PNG\" > </imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"../es/dx2-selectMouse.png"
"\" format=\"PNG\" /> </imageobject>"

#. type: Content of: <section><para>
#: en/selectMouse.xml:23
msgid ""
"If you are not happy with how your mouse responds, you can select a "
"different one here."
msgstr ""
"Si el ratón no responde correctamente, aquí puede elegir uno diferente."

#. type: Content of: <section><para>
#: en/selectMouse.xml:25
msgid ""
"Usually, <guilabel>Universal</guilabel> - <guilabel>Any PS/2 and USB mice</"
"guilabel> is a good choice."
msgstr ""
"Normalmente, <guilabel>Universal</guilabel> - <guilabel>Cualquier ratón PS/2 "
"y ratones USB</guilabel> es la mejor elección."

#. type: Content of: <section><para>
#: en/selectMouse.xml:27
msgid ""
"Select <guilabel>Universal</guilabel> - <guilabel>Force evdev</guilabel> to "
"configure the buttons that do not work on a mouse with six or more buttons."
msgstr ""
"Seleccione <guilabel>Universal</guilabel> - <guilabel>Forzar evdev</"
"guilabel> para configurar los botones que no funcionan en un ratón de seis o "
"más botones."

#. type: Content of: <section><info><title>
#: en/setupBootloaderAddEntry.xml:3
msgid "Add or Modify a Boot Menu Entry"
msgstr "Agregando o modificando una entrada en el menú de arranque"

#. type: Content of: <section><mediaobject>
#: en/setupBootloaderAddEntry.xml:8
#, fuzzy
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-"
"bootloaderConfiguration.png\" align=\"center\" format=\"PNG\" xml:id="
"\"bootloaderConfiguration-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-"
"bootloaderConfiguration.png\" format=\"PNG\" align=\"center\" xml:id="
"\"bootloaderConfiguration-im1\"></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:13
msgid ""
"You can add an entry or modify the one you select first, by pressing the "
"relevant button in the <emphasis>Bootloader Configuration</emphasis> screen "
"and editing the screen that pops up on top of it."
msgstr ""
"Puede agregar una entrada o modificar la que escogió primero, pulsando el "
"boton necesario en la ventana <emphasis>Configuración de arranque</emphasis> "
"y modificando los opciones en la ventana que aparece encima."

#. type: Content of: <section><note><para>
#: en/setupBootloaderAddEntry.xml:18
msgid ""
"If you have chosen <code>Grub 2</code> as your bootloader, you cannot use "
"this tool to edit entries at this step, press 'Next'. You need to manually "
"edit <code>/boot/grub2/custom.cfg</code> or use <code>grub-customizer</code> "
"instead."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/setupBootloaderAddEntry.xml:25
#, fuzzy
msgid ""
"<imageobject> <imagedata revision=\"1\" xml:id=\"setupBootloaderAddEntry-"
"im1\" align=\"center\" format=\"PNG\" fileref=\"dx2-setupBootloaderAddEntry."
"png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" xml:id=\"installer-im2\" align="
"\"center\" format=\"PNG\" fileref=\"../dx-help.png\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:30
msgid ""
"Some things that can be done without any risk, are changing the label of an "
"entry and ticking the box to make an entry the default one."
msgstr ""
"Unas cosas que se pueden hacer sin peligro son cambiar la etiqueta de una "
"entrada y marcar una como la predeterminada."

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:33
msgid ""
"You can add the proper version number of an entry, or rename it completely."
msgstr ""
"Puede anadir el número de versión adecuado a una entrada o la puede "
"renombrar completamente."

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:36
msgid ""
"The default entry is the one the systems boots into if you don't make a "
"choice while booting up."
msgstr ""
"La entrada predeterminada es la que usará su sistema para arrancar a menos "
"que seleccione otra."

#. type: Content of: <section><warning><para>
#: en/setupBootloaderAddEntry.xml:40
msgid ""
"Editing other things can leave you with an unbootable system. Please don't "
"just try something without knowing what you are doing."
msgstr ""
"Modificando otras cosas puede hacer que su sistema no arranque. Por favor, "
"no haga nada sin saber lo que está haciendo."

#. type: Content of: <section><info><title>
#: en/setupBootloader.xml:3
msgid "Bootloader main options"
msgstr "Opciones principales del cargador de arranque"

#.  2012-08-12 Copied this page, setupBootloader.xml,  from setupBootloaderBeginner.xml and REMOVED the string "Beginner" everywhere, except in this sentence.  
#.  2013-3-30 Removed refernce to bootloader expert page and suggest using grub2 where other grub2 systems exist
#. type: Content of: <section><mediaobject>
#: en/setupBootloader.xml:11
msgid ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" fileref=\"dx2-"
"setupBootloader.png\" xml:id=\"setupBootloader-im1\" format=\"PNG\" /> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"../es/dx2-setupBootloader."
"png\" align=\"center\" xml:id=\"setupBootloader-im1\" format=\"PNG\" /> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/setupBootloader.xml:16
msgid ""
"If you prefer different bootloader settings to those chosen automatically by "
"the installer, you can change them here."
msgstr ""
"Si prefiere una configuración distinta de la elegida automáticamente por "
"elinstalador del cargador de arranque, aquí puede cambiarla."

#. type: Content of: <section><para>
#: en/setupBootloader.xml:20
msgid ""
"You may already have another operating system on your machine, in which case "
"you need to decide whether to add Mageia to your existing bootloader, or "
"allow Mageia to create a new one."
msgstr ""
"Puede que tenga otro sistema operativo en su ordenador. En ese caso, "
"necesita decidir si desea añadir Mageia al cargador de arranque existente o "
"permitir a Mageia crear uno nuevo."

#. type: Content of: <section><tip><para>
#: en/setupBootloader.xml:26
msgid "The Mageia graphical menus are nice :)"
msgstr "Los menús gráficos de Mageia son buenos y bonitos :)"

#. type: Content of: <section><section><info><title>
#: en/setupBootloader.xml:32
msgid "Using a Mageia bootloader"
msgstr "Usando el cargador de arranque de Mageia"

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:36
msgid ""
"By default, Mageia writes a new GRUB (legacy) bootloader into the MBR "
"(Master Boot Record) of your first hard drive. If you already have other "
"operating systems installed, Mageia attempts to add them to your new Mageia "
"boot menu."
msgstr ""
"Por defecto, Mageia escribe un nuevo cargador GRUB en el MBR (Master Boot "
"Record) de su primer disco duro. Si ya tiene otros sistemas operativos, "
"Mageia intentará añadirlos al nuevo menú de arranque."

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:41
msgid ""
"Mageia now also offers GRUB2 as an optional bootloader in addition to GRUB "
"legacy and Lilo."
msgstr ""
"Mageia ahora también ofrece GRUB2 como administrador de arranque "
"opcionalademás del tradicional GRUB y de Lilo."

#. type: Content of: <section><section><warning><para>
#: en/setupBootloader.xml:45
msgid ""
"Linux systems which use the GRUB2 bootloader are not currently supported by "
"GRUB (legacy) and will not be recognised if the default GRUB bootloader is "
"used."
msgstr ""
"Los sistemas Linux que usan el cargador de arranque GRUB2 actualmente no son "
"soportados por GRUB  y no se reconocerán si se usa el cargador GRUB por "
"defecto."

#. type: Content of: <section><section><warning><para>
#: en/setupBootloader.xml:49
msgid ""
"The best solution here is to use the GRUB2 bootloader which is available at "
"the Summary page during installation."
msgstr ""
"La mejor solución es usar el cargador de arranque GRUB2 que está disponible "
"en la página de resumen durante la instación."

#. type: Content of: <section><section><info><title>
#: en/setupBootloader.xml:56
msgid "Using an existing bootloader"
msgstr "Usando un cargador de arranque existente"

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:60
msgid ""
"If you decide to use an existing bootloader then you will need to remember "
"to STOP at the summary page during the installation and click the Bootloader "
"<guibutton>Configure</guibutton> button, which will allow you to change the "
"bootloader install location."
msgstr ""
"Si decide usar un cargador de arranque existente, tendrá que acordarse de "
"PARAR en la página del resumen durante la instalación y pulsar el botón de "
"<guibutton>Configuración</guibutton> del Cargador de Arranque, que le "
"permitirá cambiar el lugar de instalación del cargador de arranque."

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:66
msgid ""
"Do not select a device e.g.\"sda\", or you will overwrite your existing MBR. "
"You must select the root partition that you chose during the partitioning "
"phase earlier, e.g.  sda7."
msgstr ""
"No elija un dispositivo como \"sda\", o sobrescribirá el MBR existente. Debe "
"de elegir la partición root que eligió durante la fase de particionado, como "
"por ejemplo sda7."

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:71
msgid "To be clear, sda is a device, sda7 is a partition on that device."
msgstr "Para ser claro, sda es un dispositivo, sda7 es una partición."

#. type: Content of: <section><section><tip><para>
#: en/setupBootloader.xml:75
msgid ""
"Go to tty2 with Ctrl+Alt+F2 and type <literal>df</literal> to check where "
"your <literal>/</literal> (root) partition is. Ctrl+Alt+F7 takes you back to "
"the installer screen."
msgstr ""
"Vaya a tty2 con Ctrl+Alt+F2 y escriba <literal>df</literal> para comprobar "
"donde está su partición <literal>/</literal> (root). Ctrl+Alt+F7 le devuelve "
"al instalador."

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:81
msgid ""
"The exact procedure for adding your Mageia system to an existing bootloader "
"is beyond the scope of this help, however in most cases it will involve "
"running the relevant bootloader installation program which should detect and "
"add it automatically. See the documentation for the operating system in "
"question."
msgstr ""
"El proceso exacto para añadir su sistema operativo Mageia al cargador de "
"arranque existente están fuera del alcance de este manual, pero normalmente "
"consiste en ejecutar el programa de instalación del cargador de arranque que "
"debería detectarlo y añadirlo automáticamente. Vea la documentación del "
"sistema operativo en cuestión."

#. type: Content of: <section><section><info><title>
#: en/setupBootloader.xml:91
msgid "Bootloader advanced option"
msgstr "Opción avanzada del cargador de arranque"

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:95
msgid ""
"If you have very limited disk space for the <literal>/</literal> partition "
"that contains <literal>/tmp</literal>, click on <guibutton>Advanced</"
"guibutton> and check the box for <guilabel>Clean /tmp at each boot</"
"guilabel>. This helps to maintain some free space."
msgstr ""
"Si tiene el espacio del disco muy limitado para la partición <literal>/</"
"literal> que contiene <literal>/tmp</literal>, haga click en "
"<guibutton>Avanzado</guibutton> y marque la casilla para <guilabel>Limpiar /"
"tmp en cada arranque</guilabel>.  Esto ayuda a mantener algo de espacio "
"libre."

#. type: Content of: <section><info><title>
#: en/setupSCSI.xml:11
msgid "Setup SCSI"
msgstr "Configurando SCSI"

#.  Made by marja on 2012 04 02 
#.  NEEDS TO BE REVIEWED! 
#.  JohnR - edited 2012-03-03 
#.  SimonNZG has reviewed 2012-04-03 (changed editted to edited in JohnR's comment ;-) 
#.  barjac has re-reviewed and made some minor tweaks. Revisions incremented. 
#.  marja 2012-04-24 added screenshot 
#.  marja 2012-04-25 replacing John's version 1.6 because that one was based on the
#.        Mdv doc instead of on our setupSCSI file 
#. type: Content of: <section><mediaobject>
#: en/setupSCSI.xml:26
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" format="
"\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" align="
"\"center\" format=\"PNG\" xml:id=\"setupSCSI-im1\" /> </imageobject>"

#. type: Content of: <section><para>
#: en/setupSCSI.xml:32
msgid ""
"DrakX usually detects hard disks correctly. With some older SCSI controllers "
"it may be unable to determine the correct drivers to use and subsequently "
"fail to recognise the drive."
msgstr ""
"DrakX suele detectar correctamente los discos duros. Con algunos "
"controladores SCSI antiguos puede que no sea capaz de detectar los "
"controladores correctos a usar y puede fallar al intentar reconocer el disco "
"duro."

#. type: Content of: <section><para>
#: en/setupSCSI.xml:36
msgid ""
"If this happens, you will need to manually tell Drakx which SCSI drive(s) "
"you have."
msgstr ""
"Si pasa esto, necesitará \"mostrarle\" manualmente el disco duro SCSI que "
"tenga."

#. type: Content of: <section><para>
#: en/setupSCSI.xml:39
msgid "DrakX should then be able to configure the drive(s) correctly."
msgstr ""
"Después DrakX debería de poder configurar el(los) disco(s) correctamente."

#. type: Content of: <section><info><title>
#: en/soundConfig.xml:11
msgid "Sound Configuration"
msgstr "Configurar el sonido"

#.  Started by marja on 2013-12-07 
#. type: Content of: <section><mediaobject>
#: en/soundConfig.xml:17
msgid ""
"<imageobject> <imagedata fileref=\"dx2-soundConfig.png\" revision=\"1\" "
"format=\"PNG\" xml:id=\"soundConfig-im1\" /> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-soundConfig.png\" revision=\"1\" "
"format=\"PNG\" xml:id=\"soundConfig-im1\" /> </imageobject>"

#. type: Content of: <section><para>
#: en/soundConfig.xml:23
msgid ""
"In this screen the name of the driver that the installer chose for your "
"sound card is given, which will be the default driver if we have a default "
"one."
msgstr ""
"En esta pantalla aparece el nombre del driver que el instalador ha escogido "
"para su tarjeta de sonido, que será el dado por defecto si es que hay alguno."

#. type: Content of: <section><para>
#: en/soundConfig.xml:27
msgid ""
"The default driver should work without problems. However, if after install "
"you do encounter problems, then run <command>draksound</command> or start "
"this tool via MCC (Mageia Control Center), by choosing the "
"<guilabel>Hardware</guilabel> tab and clicking on <guilabel>Sound "
"Configuration</guilabel> at the top right of the screen."
msgstr ""
"El driver por defecto debería funcionar sin problemas. Sin embargo, si tras "
"la instalación hay problemas, ejecute <command>draksound</command> o inicie "
"esta herramienta vía MCC (Centro de Control de Mageia), escogiendo la "
"etiqueta <guilabel>Hardware</guilabel> y haciendo click en "
"<guilabel>Configurar Sonido</guilabel> en la esquina superior derecha de la "
"pantalla."

#. type: Content of: <section><para>
#: en/soundConfig.xml:33
msgid ""
"Then, in the draksound or \"Sound Configuration\" tool screen, click on "
"<guibutton>Advanced</guibutton> and then on <guibutton>Troubleshooting</"
"guibutton> to find very useful advice about how to solve the problem."
msgstr ""
"Entonces, en la pantalla de la herramienta de \"Configurar sonido\" de "
"draksound, haga click en <guibutton>Avanzado</guibutton> y en "
"<guibutton>Solución de problemas</guibutton> para encontrar un consejo útil "
"sobre cómo resolver el problema."

#. type: Content of: <section><section><info><title>
#: en/soundConfig.xml:41
msgid "Advanced"
msgstr "Avanzado"

#. type: Content of: <section><section><para>
#: en/soundConfig.xml:44
msgid ""
"Clicking <guibutton>Advanced</guibutton> in this screen, during install, is "
"useful if there is no default driver and there are several drivers "
"available, but you think the installer selected the wrong one."
msgstr ""
"Hacer click en <guibutton>Avanzado</guibutton> en esta pantalla, durante la "
"instalación, es útil si no hay un driver por defecto y hay varios "
"disponibles, o si cree que el instalador escogió el driver equivocado."

#. type: Content of: <section><section><para>
#: en/soundConfig.xml:49
msgid ""
"In that case you can select a different driver after clicking on "
"<guibutton>Let me pick any driver</guibutton>."
msgstr ""
"In ese caso, puede seleccionar un driver diferente tras hacer click en "
"<guibutton>Escoger un driver</guibutton>."

#. type: Content of: <section><info><title>
#: en/takeOverHdConfirm.xml:4
msgid "Confirm hard disk to be formatted"
msgstr "Confirme el disco que va a formatear"

#.  Made by marja on 2012 04 03 
#.  test comment - johnr 
#.  2012-04-24 marja - replaced "if you are not sure you selected the correct
#.     hard disk." with "if you are not sure about your choice", because I'm sure I
#.     saw this help screen when I had only one HD 
#.  2013-05-05 marja added screenshot 
#. type: Content of: <section><mediaobject>
#: en/takeOverHdConfirm.xml:19
msgid ""
"<imageobject> <imagedata fileref=\"dx2-takeOverHdConfirm.png\" format=\"PNG"
"\" align=\"center\" ></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-takeOverHdConfirm.png\" format=\"PNG"
"\" align=\"center\" ></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/takeOverHdConfirm.xml:24
msgid ""
"Click on <guibutton>Previous</guibutton> if you are not sure about your "
"choice."
msgstr ""
"Haga click en <guibutton>Previo</guibutton> si no está seguro de su elección."

#. type: Content of: <section><para>
#: en/takeOverHdConfirm.xml:27
msgid ""
"Click on <guibutton>Next</guibutton> if you are sure and want to erase every "
"partition, every operating system and all data on that hard disk."
msgstr ""
"Haga click en <guibutton>Siguiente</guibutton> si está seguro y quiereborrar "
"todas las particiones, sistemas operativos y datos de su disco duro."

#. type: Content of: <section><info><title>
#: en/uninstall-Mageia.xml:10
msgid "Uninstall Media"
msgstr ""

#. type: Content of: <section><section><title>
#: en/uninstall-Mageia.xml:16
msgid "Howto"
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:18
msgid ""
"If Mageia didn't convince you or you can't install it correctly, in short "
"you want get rid of it. That is your right and Mageia give you also the "
"possibility to be uninstalled. That is not true for every operating system."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:23
msgid ""
"After your data backup, reboot on your Mageia DVD and select Rescue system, "
"then, Restore Windows boot loader. At the next boot, you will only have "
"Windows without any menu to choose your operating system."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:27
msgid ""
"To get back the place used by Mageia partitions on Windows, click on "
"<code>Start -&gt; Control Panel -&gt; Administrative Tools -&gt; Computer "
"Management -&gt; Storage -&gt; Disk Management</code> to access to the "
"partition management. You will recognize the Mageia partition because they "
"are labeled <guilabel>Unknown</guilabel>, and also by there size and place "
"in the disk. Right click on one of these partitions and select "
"<guibutton>Delete</guibutton>. The space will be freed."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:35
msgid ""
"If you have XP, you can create a new partition and format it (FAT32 or "
"NTFS). It will get a partition letter."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:38
msgid ""
"If you have Vista or 7, you have one more possibility, you can extend the "
"existing partition that is at the left hand of the free space.  It also "
"exists in the shops or in the Internet, shareware, free or not, that allows "
"more possibilities for XP, Vista or 7 (Gparted for example).  That is at "
"your own risk."
msgstr ""

#~ msgid ""
#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-"
#~ "setupBootloaderAddEntry.png\" format=\"PNG\" align=\"center\" xml:id="
#~ "\"setupBootloaderAddEntry-im1\"></imagedata> </imageobject>"
#~ msgstr ""
#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-"
#~ "setupBootloaderAddEntry.png\" format=\"PNG\" align=\"center\" xml:id="
#~ "\"setupBootloaderAddEntry-im1\"></imagedata> </imageobject>"