# SOME DESCRIPTIVE TITLE # Copyright (C) YEAR Mageia # This file is distributed under the same license as the Mageia Installer Help package. # # Translators: # Cristian Garde Zarza , 2015 # Davidmp , 2016 # Francesc Pinyol Margalef , 2013-2015 # Francesc Pinyol Margalef , 2015 # Davidmp , 2016-2017 # Robert Antoni Buj Gelonch , 2015,2017-2018 # Robert Antoni Buj Gelonch , 2015 # Yuri Chornoivan , 2016 msgid "" msgstr "" "Project-Id-Version: Mageia\n" "Report-Msgid-Bugs-To: doc-discuss@ml.mageia.org\n" "POT-Creation-Date: 2017-06-25 20:39+0300\n" "PO-Revision-Date: 2018-02-23 15:22+0000\n" "Last-Translator: Robert Antoni Buj Gelonch \n" "Language-Team: Catalan (http://www.transifex.com/MageiaLinux/mageia/language/" "ca/)\n" "Language: ca\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #. type: Content of:
#: en/acceptLicense.xml:25 msgid "License and Release Notes" msgstr "Llicència i notes de la versió" #. type: Content of: <section><mediaobject> #: en/acceptLicense.xml:29 msgid "" "<imageobject condition=\"classical\"> <imagedata xml:id=\"acceptLicense-" "im1\" revision=\"4\" align=\"center\" format=\"PNG\" fileref=\"dx2-license." "png\"/> </imageobject> <imageobject> <imagedata xml:id=\"acceptLicense-im2\" " "revision=\"5\" align=\"center\" condition=\"live\" format=\"PNG\" fileref=" "\"live-license.png\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata xml:id=\"acceptLicense-" "im1\" revision=\"4\" align=\"center\" format=\"PNG\" fileref=\"dx2-license." "png\"/> </imageobject> <imageobject> <imagedata xml:id=\"acceptLicense-im2\" " "revision=\"5\" align=\"center\" condition=\"live\" format=\"PNG\" fileref=" "\"live-license.png\"/> </imageobject>" #. type: Content of: <section><section><info><title> #: en/acceptLicense.xml:40 msgid "License Agreement" msgstr "Acord de llicència" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:43 msgid "" "Before installing <application>Mageia</application>, please read the license " "terms and conditions carefully." msgstr "" "Abans d'instal·lar <application>Mageia</application>, llegiu atentament els " "termes i les condicions de la llicència." #. type: Content of: <section><section><para> #: en/acceptLicense.xml:46 msgid "" "These terms and conditions apply to the entire <application>Mageia</" "application> distribution and must be accepted before you can continue." msgstr "" "Aquests termes i condicions s'apliquen a la totalitat de la distribució " "<application>Mageia</application> i cal acceptar-los abans de continuar." #. type: Content of: <section><section><para> #: en/acceptLicense.xml:50 msgid "" "To accept, simply select <guilabel>Accept</guilabel> and then click on " "<guibutton>Next</guibutton>." msgstr "" "Per acceptar-los, seleccioneu <guilabel>Accepta</guilabel> i després feu " "clic a <guibutton>Següent</guibutton>." #. type: Content of: <section><section><para> #: en/acceptLicense.xml:53 msgid "" "If you decide not to accept these conditions, then we thank you for looking. " "Clicking <guibutton>Quit</guibutton> will reboot your computer." msgstr "" "Si decidiu no acceptar aquestes condicions, us agraïm el vostre interès. " "Fent clic a <guibutton>Surt</guibutton> l'ordinador es reiniciarà." #. type: Content of: <section><section><info><title> #: en/acceptLicense.xml:63 msgid "Release Notes" msgstr "Notes de la versió" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:70 msgid "" "Important information are given about this release of <application>Mageia</" "application> and are accessible clicking on the <guibutton>Release Notes</" "guibutton> button." msgstr "" "Hi ha informació important sobre aquesta versió de <application>Mageia</" "application> i és accessible clicant al botó de les <guibutton>Notes de la " "versió</guibutton>." #. type: Attribute 'xml:lang' of: <section> #: en/add_supplemental_media.xml:2 en/DrakLive-cover.xml:2 en/DrakLive.xml:1 #: en/DrakX-cover.xml:2 en/DrakX.xml:1 en/media_selection.xml:1 msgid "en" msgstr "ca" #. type: Content of: <section><info><title> #: en/add_supplemental_media.xml:10 msgid "Media Selection (Configure Supplemental Installation Media)" msgstr "" "Selecció dels mitjans (configura els mitjans d'instal·lació suplementaris)" #. papoteur 2013-04-13 - created #. marja 2013-04-16 added screenshot and expanded title (because is was the same as for media_selection #. marja 2013-04-16 s/a optical/an optcal/ s/support/disc/ s/or or/or/ s/at/during/ as suggested by Tristan Campbell #. type: Content of: <section><mediaobject> #: en/add_supplemental_media.xml:18 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-" "add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-" "add_supplemental_media-im1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-" "add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-" "add_supplemental_media-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/add_supplemental_media.xml:24 msgid "" "This screen gives you the list of already recognized repositories. You can " "add other sources for packages, like an optical disc or a remote source. The " "source selection determines which packages will be available for selection " "during the next steps." msgstr "" "Aquesta pantalla us mostra la llista dels dipòsits ja reconeguts. Podeu " "afegir altres orígens de paquets, com ara un disc òptic i bé un origen " "remot. La selecció de l'origen determina quins paquets estaran disponibles " "per a ser seleccionats en els següents passos." #. type: Content of: <section><para> #: en/add_supplemental_media.xml:29 msgid "For a network source, there are two steps to follow:" msgstr "Per a un origen en xarxa cal seguir dos passos:" #. type: Content of: <section><orderedlist><listitem><para> #: en/add_supplemental_media.xml:33 msgid "Choosing and activation of the network, if not already up." msgstr "Tria i activació de la xarxa, si encara no està activa." #. type: Content of: <section><orderedlist><listitem><para> #: en/add_supplemental_media.xml:37 msgid "" "Selecting a mirror or specifying a URL (very first entry). By selecting a " "mirror, you have access to the selection of all repositories managed by " "Mageia, like the Nonfree , the Tainted repositories and the Updates. With " "the URL, you can designate a specific repository or your own NFS " "installation." msgstr "" "Selecció d'una rèplica o especificació d'un URL (la primera entrada). En " "seleccionar una rèplica teniu accés a la selecció de tots els dipòsits " "gestionats per Mageia, com ara Nonfree, Tainted i Updates. Amb l'URL podeu " "designar un dipòsit específic o la vostra pròpia instal·lació NFS." #. type: Content of: <section><note><para> #: en/add_supplemental_media.xml:46 msgid "" "If you are updating a 64 bit installation which may contain some 32 bit " "packages, it is advised to use this screen to add an online mirror by " "ticking one of the Network protocols here. The 64 bit DVD iso only contains " "64 bit and noarch packages, it will not be able to update the 32 bit " "packages. However, after adding an online mirror, installer will find the " "needed 32 bit packages there." msgstr "" "Si esteu actualitzant una instal·lació de 64 bits que pot contenir alguns " "paquets de 32 bits, s'aconsella utilitzar aquesta finestra per afegir una " "rèplica en línia, marcant aquí un dels protocols de xarxa. L'ISO del DVD de " "64 bits només conté els paquets de 64 bits i els paquets noarch, no serà " "capaç d'actualitzar els paquets de 32 bits. No obstant això, després de " "l'addició d'una rèplica en línia, l'instal·lador trobarà els paquets de 32 " "bits necessaris." #. type: Content of: <section><info><title> #: en/addUser.xml:3 msgid "User and Superuser Management" msgstr "Gestió d'usuaris i superusuari" #. Lebarhon: 20170210 updated for Mageia 6 (umask) #. type: Content of: <section><mediaobject> #: en/addUser.xml:7 msgid "" "<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref=" "\"dx2-setRootPassword.png\" align=\"center\" revision=\"1\" xml:id=" "\"setRootPassword-im1\"/> </imageobject> <imageobject> <imagedata format=" "\"PNG\" fileref=\"live-user1.png\"/> </imageobject>" msgstr "" "<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref=" "\"dx2-setRootPassword.png\" align=\"center\" revision=\"1\" xml:id=" "\"setRootPassword-im1\"/> </imageobject> <imageobject> <imagedata format=" "\"PNG\" fileref=\"live-user1.png\"/> </imageobject>" #. type: Content of: <section><section><info><title> #: en/addUser.xml:16 msgid "Set Administrator (root) Password:" msgstr "Estableix la contrasenya d'administrador (root):" #. type: Content of: <section><section><para> #: en/addUser.xml:19 msgid "" "It is advisable for all <application>Mageia</application> installations to " "set a superuser or administrator's password, usually called the " "<emphasis>root password</emphasis> in Linux. As you type a password into the " "top box the colour of its shield will change from red to yellow to green " "depending on the strength of the password. A green shield shows you are " "using a strong password. You need to repeat the same password in the box " "just below the first password box, this checks that you have not mistyped " "the first password by comparing them." msgstr "" "Per a qualsevol instal·lació de <application>Mageia</application> és " "aconsellable que establiu una contrasenya de superusuari o administrador, " "normalment anomenada <emphasis>contrasenya de root</emphasis> en Linux. A " "mesura que aneu introduint la contrasenya a la casella el color de l'escut " "canviarà de vermell a groc i a verd en funció de la fortalesa de la " "contrasenya. Un escut verd indica que la contrasenya és forta. Heu de " "repetir la mateixa contrasenya a la casella de sota, per a comprovar per " "comparació que no heu teclejat malament la primera contrasenya." #. type: Content of: <section><section><note><para> #: en/addUser.xml:28 msgid "" "All passwords are case sensitive, it is best to use a mixture of letters " "(upper and lower case), numbers and other characters in a password." msgstr "" "Totes les contrasenyes distingeixen entre majúscules i minúscules. És " "recomanable fer servir una barreja de lletres (majúscules i minúscules), " "nombres i altres caràcters." #. type: Content of: <section><section><info><title> #: en/addUser.xml:35 msgid "Enter a user" msgstr "Introduïu un usuari" #. type: Content of: <section><section><para> #: en/addUser.xml:37 msgid "" "Add a user here. A user has fewer rights than the superuser (root), but " "enough to use the internet, office applications or play games and anything " "else the average user does with his computer" msgstr "" "Afegiu aquí un usuari. Un usuari té menys permisos que el superusuari " "(root), però prou per a navegar per Internet, fer servir aplicacions " "ofimàtiques o jugar, i fer qualsevol altra cosa que un usuari mitjà fa amb " "el seu ordinador." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:40 msgid "" "<guibutton>Icon</guibutton>: if you click on this button it will change the " "user's icon." msgstr "" "<guibutton>Icona</guibutton>: si feu clic en aquest botó, canviarà la icona " "d'usuari." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:43 msgid "" "<guilabel>Real Name</guilabel>: Insert the user's real name into this text " "box." msgstr "<guilabel>Nom real</guilabel>: poseu-hi el nom real de l'usuari." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:46 msgid "" "<guilabel>Login Name</guilabel>: Here you enter the user login name or let " "drakx use a version of the user's real name. <emphasis>The login name is " "case sensitive.</emphasis>" msgstr "" "<guilabel>Nom de connexió</guilabel>: poseu-hi el nom de connexió de " "l'usuari o deixeu que drakx en creï un a partir del nom real de l'usuari. " "<emphasis>El nom de connexió distingeix entre majúscules i minúscules</" "emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:50 msgid "" "<guilabel>Password</guilabel>: In this text box you should type in the user " "password. There is a shield at the end of the text box that indicates the " "strength of the password. (See also <xref linkend=\"givePassword\"/>)" msgstr "" "<guilabel>Contrasenya</guilabel>: en aquesta casella hauríeu d'escriure la " "contrasenya de l'usuari. Hi ha un camp al final que indica la força de la " "contrasenya. (Vegeu també <xref linkend=\"givePassword\"/>.)" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:55 msgid "" "<guilabel>Password (again)</guilabel>: Retype the user password into this " "text box and drakx will check you have the same password in each of the user " "password text boxes." msgstr "" "<guilabel>Contrasenya (una altra vegada)</guilabel>: torneu a escriure-hi la " "contrasenya i drakx comprovarà que hi hagi la mateixa contrasenya en les " "dues caselles." #. type: Content of: <section><section><note><para> #: en/addUser.xml:61 msgid "" "Any user you add while installing Mageia, will have a both read and write " "protected home directory (umask=0027)." msgstr "" #. type: Content of: <section><section><note><para> #: en/addUser.xml:63 msgid "" "You can add all extra needed users in the <emphasis>Configuration - Summary</" "emphasis> step during the install. Choose <emphasis>User management</" "emphasis>." msgstr "" #. type: Content of: <section><section><note><para> #: en/addUser.xml:66 msgid "The access permissions can also be changed after the install." msgstr "" "Els permisos d'accés també es poden modificar després de la instal·lació." #. type: Content of: <section><section><info><title> #: en/addUser.xml:72 msgid "Advanced User Management" msgstr "Gestió avançada d'usuaris" #. type: Content of: <section><section><para> #: en/addUser.xml:74 msgid "" "If the <guibutton>advanced</guibutton> button is clicked you are offered a " "screen that allows you to edit the settings for the user you are adding." msgstr "" #. type: Content of: <section><section><para> #: en/addUser.xml:77 msgid "Additionally, you can disable or enable a guest account." msgstr "A més, podeu habilitar o inhabilitar un compte de convidat." #. type: Content of: <section><section><warning><para> #: en/addUser.xml:80 msgid "" "Anything a guest with a default <emphasis>rbash</emphasis> guest account " "saves to his /home directory will be erased when he logs out. The guest " "should save his important files to a USB key." msgstr "" "Tot allò que un convidat, amb un compte predeterminat <emphasis>rbash</" "emphasis>, desi al seu directori /home serà esborrat quan tanqui la sessió. " "El convidat hauria de desar els fitxers importants en una memòria USB." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:86 msgid "" "<guilabel>Enable guest account</guilabel>: Here you can enable or disable a " "guest account. The guest account allows a guest to log into and use the PC, " "but he has more restricted access than normal users." msgstr "" "<guilabel>Habilita el compte de convidat</guilabel>: aquí podeu habilitar o " "inhabilitar el compte d'un convidat. Aquest tipus de compte permet a un " "convidat iniciar la sessió i utilitzar el PC, però té un accés més " "restringit que els usuaris normals." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:92 msgid "" "<guilabel>Shell</guilabel>: This drop down list allows you to change the " "shell used by the user you are adding in the previous screen, options are " "Bash, Dash and Sh" msgstr "" "<guilabel>Shell d'inici de sessió</guilabel>: aquesta llista desplegable us " "permet canviar el shell d'inici de sessió utilitzat per a l'usuari que " "acabeu d'afegir a la pantalla anterior. Les opcions són Bash, Dash i Sh." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:97 msgid "" "<guilabel>User ID</guilabel>: Here you can set the user ID for the user you " "are adding in the previous screen. This is a number. Leave it blank unless " "you know what you are doing." msgstr "" "<guilabel>Id. d'usuari</guilabel>: aquí podeu establir l'id. d'usuari per a " "l'usuari que acabeu d'afegir a la pantalla anterior. És un nombre. Deixeu-lo " "en blanc excepte si sabeu què esteu fent." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:102 msgid "" "<guilabel>Group ID</guilabel>: This lets you set the group ID. Also a " "number, usually the same one as for the user. Leave it blank unless you know " "what you are doing." msgstr "" "<guilabel>Id. de grup</guilabel>: aquí podeu establir l'id. de grup. També " "és un nombre, habitualment el mateix que per a l'usuari. Deixeu-ho en blanc " "excepte si sabeu què esteu fent." #. type: Content of: <section><info><title> #: en/ask_mntpoint_s.xml:11 msgid "Choose the mount points" msgstr "Tria dels punts de muntatge" #. Made by marja on 2012 03 28 #. NEEDS TO BE REVIEWED! #. SimonNZG 2012-04-03 has taken a look but needs to come back #. removed para xml:id's, marja, 20120409 #. barjac 14/04/2012 Minor edit to improve grammar and replaced "at least ONE" #. with "a", as I can't imagine having more than one root partition ;) #. Lebarhon : I put [] where it seems having mistakes #. Marja: you're right, in English English it is "its type", however, the Americans #. write "it's type". And you're right about the redundant part, too, I removed it #. And JohnR says the Americans are WRONG! :-)) #. 2012-04-19 Language proofreading done #. type: Content of: <section><mediaobject> #: en/ask_mntpoint_s.xml:27 msgid "" "<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-" "chooseMountpoints.png\" align=\"center\" format=\"PNG\" xml:id=" "\"chooseMountPoints-im1\"></imagedata> </imageobject> <imageobject " "condition='live'> <imagedata revision=\"1\" fileref=\"live-chooseMountpoints." "png\" align=\"center\" format=\"PNG\" xml:id=\"live-chooseMountPoints-" "im1\"></imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/ask_mntpoint_s.xml:37 msgid "" "Here you see the Linux partitions that have been found on your computer. If " "you don't agree with the <application>DrakX</application> suggestions, you " "can change the mount points." msgstr "" "Aquí podeu veure les particions Linux que s'han trobat a l'ordinador. Si no " "esteu d'acord amb els suggeriments de <application>DrakX</application>, " "podeu canviar els punts de muntatge." #. type: Content of: <section><note><para> #: en/ask_mntpoint_s.xml:42 msgid "" "If you change anything, make sure you still have a <literal>/</literal> " "(root) partition." msgstr "" "Si canvieu alguna cosa, assegureu-vos que encara teniu una partició " "<literal>/</literal> (root)." #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:48 msgid "" "Every partition is shown as follows: \"Device\" (\"Capacity\", \"Mount point" "\", \"Type\")." msgstr "" "Cada partició es mostra així: «Dispositiu» («Capacitat», «Punt de muntatge», " "«Tipus»)." #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:53 msgid "" "\"Device\", is made up of: \"hard drive\", [\"hard drive number\"(letter)], " "\"partition number\" (for example, \"sda5\")." msgstr "" "«Dispositiu» es compon de: «unitat de disc dur», [«número d'unitat de disc " "dur»(lletra)], «número de partició» (per exemple, «sda5»)." #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:59 msgid "" "If you have many partitions, you can choose many different mount points from " "the drop down menu, such as <literal>/</literal>, <literal>/home</literal> " "and <literal>/var</literal>. You can even make your own mount points, for " "instance <literal>/video</literal> for a partition where you want to store " "your films, or <literal>/cauldron-home</literal> for the <literal>/home</" "literal> partition of a cauldron install." msgstr "" "Si teniu diverses particions, podeu triar diversos punts de muntatge amb el " "menú desplegable, com ara <literal>/</literal>, <literal>/home</literal> i " "<literal>/var</literal>. Podeu fins i tot crear els vostres propis punts de " "muntatge, per exemple <literal>/video</literal> per a una partició on voleu " "emmagatzemar les pel·lícules, o bé <literal>/cauldron-home</literal> per a " "la partició <literal>/home</literal> de la instal·lació cauldron." #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:69 msgid "" "For partitions you don't need to have access to, you can leave the mount " "point field blank." msgstr "" "Per a les particions a les quals no heu d'accedir, podeu deixar el camp del " "punt de muntatge en blanc." #. type: Content of: <section><warning><para> #: en/ask_mntpoint_s.xml:75 msgid "" "Choose <guibutton>Previous</guibutton> if you are not sure what to choose, " "and then tick <guilabel>Custom disk partitioning</guilabel>. In the screen " "that follows, you can click on a partition to see its type and size." msgstr "" "Trieu <guibutton>Anterior</guibutton> si no esteu segur de què triar, i " "llavors marqueu <guilabel>Partició personalitzada de disc</guilabel>. A la " "següent pantalla podeu clicar a una partició per a veure'n el tipus i la " "mida. " #. type: Content of: <section><para> #: en/ask_mntpoint_s.xml:81 msgid "" "If you are sure the mount points are correct, click on <guibutton>Next</" "guibutton>, and choose whether you only want to format the partition(s) " "DrakX suggests, or more." msgstr "" "Si esteu segur que els punts de muntatge són correctes, feu clic a " "<guibutton>Següent</guibutton>, i trieu si voleu formatar les particions " "suggerides per DrakX, o bé més." #. type: Content of: <section><info><title> #: en/bestTime.xml:10 msgid "Clock settings" msgstr "Paràmetres del rellotge" #. type: Content of: <section><mediaobject> #: en/bestTime.xml:14 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"live-bestTime.png\" " "format=\"PNG\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"live-bestTime.png\" " "format=\"PNG\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/bestTime.xml:20 msgid "" "In this step, you have to select on which time your internal clock is set, " "either local time or UTC time." msgstr "" #. type: Content of: <section><para> #: en/bestTime.xml:23 msgid "In advanced tab, you will find more options about clock settings." msgstr "" "A la pestanya de paràmetres avançats trobareu més opcions sobre els " "paràmetres del rellotge." #. type: Content of: <section><info><title> #: en/bootLive.xml:1 msgid "Boot Mageia as Live system" msgstr "Arrencada de Mageia com a sistema autònom" #. type: Content of: <section><section><info><title> #: en/bootLive.xml:1 msgid "Booting the medium" msgstr "Arrencada del mitjà" #. type: Content of: <section><section><section><info><title> #: en/bootLive.xml:1 msgid "From a disc" msgstr "Des d'un disc" #. type: Content of: <section><section><section><para> #: en/bootLive.xml:1 msgid "" "You can boot directly from the media you used to burn your image (CD-ROM, " "DVD-ROM...). You usually just need to insert it in your CD/DVD drive for the " "bootloader to launch the installation automatically after rebooting the " "computer. If that does not happen you may need to reconfigure your BIOS or " "press one key that will offer you to choose the peripheral from which the " "computer will boot." msgstr "" #. type: Content of: <section><section><section><para> #: en/bootLive.xml:6 msgid "" "According to which hardware you have, and how it is configured, you get " "either one or another of the two screens below." msgstr "" #. type: Content of: <section><section><section><info><title> #: en/bootLive.xml:7 msgid "From a USB device" msgstr "Des d'un dispositiu USB" #. type: Content of: <section><section><section><para> #: en/bootLive.xml:7 msgid "" "You can boot from the USB device on which you dumped your image ISO. " "According to your BIOS settings, the computer boots perhaps directly on the " "USB device already plugged in a port. If that does not happen you may need " "to reconfigure your BIOS or press one key that will offer you to choose the " "peripheral from which the computer will boot." msgstr "" #. type: Content of: <section><section><info><title> #: en/bootLive.xml:12 msgid "In BIOS/CSM/Legacy mode" msgstr "En mode BIOS/CSM/Legacy" #. type: Content of: <section><section><mediaobject> #: en/bootLive.xml:12 msgid "<imageobject><imagedata fileref=\"../live-bootCSM.png\"/></imageobject>" msgstr "" "<imageobject><imagedata fileref=\"../live-bootCSM.png\"/></imageobject>" #. type: Content of: <section><section><mediaobject><caption><para> #: en/bootLive.xml:12 msgid "First screen while booting in BIOS mode" msgstr "La primera pantalla de l'arrencada en mode BIOS" #. type: Content of: <section><section><para> #: en/bootLive.xml:12 msgid "In the middle menu, you have the choice between three actions:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:13 msgid "" "Boot Mageia: That means Mageia 5 will start from the connected media (CD/DVD " "or USB stick) without writing anything on the disk, so expect a very slow " "system. Once the boot is done, you can proceed to the installation on a hard " "disk." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:16 msgid "" "Install Mageia: This choice will directly install Mageia on a hard disk." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:17 msgid "" "Boot from hard disk: This choice allows to boot from hard disk, as usual, " "when no media (CD/DVD or USB stick) is connected. (not working with Mageia " "5)." msgstr "" #. type: Content of: <section><section><para> #: en/bootLive.xml:19 msgid "In the bottom menu, are the Boot Options:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:19 msgid "" "F1 - Help. Explain the options \"splash\", \"apm\", \"acpi\" and \"Ide\"" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:20 msgid "F2 - Language. Choose the display language of the screens." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:21 msgid "F3 - Screen resolution. Choose between text, 640x400, 800x600, 1024x728" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:22 msgid "" "F4 - CD-Rom. CD-Rom or Other. Normally, the installation is performed from " "the inserted installation medium. Here, select other sources, like FTP or " "NFS servers. If the installation is carried out in a network with an SLP " "server, select one of the installation sources available on the server with " "this option." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:26 msgid "" "F5 - Driver. Yes or No. The system is aware about the presence of an " "optional disk with a driver update and will require its insertion during " "installation process." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:28 msgid "" "F6 - Kernel options. This is a way to specify options according to your " "hardware and the drivers to use." msgstr "" #. type: Content of: <section><section><info><title> #: en/bootLive.xml:29 msgid "In UEFI mode" msgstr "En mode UEFI" #. type: Content of: <section><section><mediaobject> #: en/bootLive.xml:29 msgid "" "<imageobject><imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" " "align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/></imageobject>" msgstr "" "<imageobject><imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" " "align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/></imageobject>" #. type: Content of: <section><section><mediaobject><caption><para> #: en/bootLive.xml:29 msgid "First screen while booting on UEFI system from disk" msgstr "La primera pantalla de l'arrencada en un sistema UEFI des del disc" #. type: Content of: <section><section><para> #: en/bootLive.xml:29 msgid "" "You have only the choice to run Mageia in Live mode (first choice) or to " "process the installation (second choice)." msgstr "" #. type: Content of: <section><section><para> #: en/bootLive.xml:30 msgid "" "If you booted from a USB stick, you get two supplemental lines which are a " "duplicata of the previous lines suffixed with \"USB\". You have to choose " "them." msgstr "" #. type: Content of: <section><section><para> #: en/bootLive.xml:32 msgid "" "In each case, the first steps will be the same to choose language, timezone " "and keyboard, then the processes differ, with <link linkend=\"testing" "\">additional steps in Live mode</link>." msgstr "" #. type: Content of: <section><info><title> #: en/chooseDesktop.xml:3 msgid "Desktop Selection" msgstr "Selecció de l'escriptori" #. type: Content of: <section><para> #: en/chooseDesktop.xml:8 msgid "" "Depending on your selection here, you may be offered further screens to fine " "tune your choice." msgstr "" "En funció de la selecció que feu aquí, se us poden oferir altres pantalles " "per a afinar la tria." #. type: Content of: <section><para> #: en/chooseDesktop.xml:11 msgid "" "After the selection step(s), you will see a slide show during package " "installation. The slide show can be disabled by pressing the " "<guilabel>Details</guilabel> button" msgstr "" "Després dels passos de selecció veureu una sessió de diapositives durant la " "instal·lació dels paquets. Podeu desactivar la sessió de diapositives " "clicant el botó <guilabel>Detalls</guilabel>." #. type: Content of: <section><mediaobject> #: en/chooseDesktop.xml:16 msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-chooseDesktop.png\" " "align=\"center\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/chooseDesktop.xml:21 msgid "" "Choose whether you prefer to use the <application>KDE</application> or " "<application>Gnome</application> desktop environment. Both come with a full " "set of useful applications and tools. Tick <guilabel>Custom</guilabel> if " "you want to use neither or both, or if you want something other than the " "default software choices for these desktop environments. The " "<application>LXDE</application> desktop is lighter than the previous two, " "sporting less eye candy and fewer packages installed by default." msgstr "" "Trieu si preferiu utilitzar l'entorn d'escriptori <application>KDE</" "application> o bé <application>Gnome</application>. Ambdós porten un conjunt " "complet d'aplicacions i eines ben útils. Marqueu <guilabel>Personalitzat</" "guilabel> si no en voleu utilitzar cap dels dos, o bé si voleu una selecció " "de programari diferent de la tria predeterminada d'aquests entorns " "d'escriptori. L'escriptori <application>LXDE</application> és més lleuger " "que els anteriors, amb una estètica menys carregada i menys paquets com a " "instal·lació predeterminada." #. type: Content of: <section><info><title> #: en/choosePackageGroups.xml:3 msgid "Package Group Selection" msgstr "Selecció de grups de paquets" #. Lebarhon 20170209 Updated SC #. type: Content of: <section><mediaobject> #: en/choosePackageGroups.xml:9 msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-choosePackageGroups.png" "\" align=\"center\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/choosePackageGroups.xml:14 msgid "" "Packages have been sorted into groups, to make choosing what you need on " "your system a lot easier. The groups are fairly self explanatory, however " "more information about the content of each is available in tool-tips which " "become visible as the mouse is hovered over them." msgstr "" "Els paquets estan agrupats per a facilitar-ne la tria. El seu contingut és " "força obvi, però per a veure'n més informació només cal que hi passeu el " "ratolí per sobre." #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:21 msgid "Workstation." msgstr "Estació de treball." #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:25 msgid "Server." msgstr "Servidor." #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:29 msgid "Graphical Environment." msgstr "Entorn gràfic." #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:33 msgid "" "Individual Package Selection: You can use this option to manually add or " "remove packages." msgstr "" "Selecció individual de paquets: podeu utilitzar aquesta opció per afegir o " "eliminar paquets individualment." #. type: Content of: <section><para> #: en/choosePackageGroups.xml:38 msgid "" "Read <xref linkend=\"minimal-install\"/> for instructions on how to do a " "minimal install (without or with X & IceWM)." msgstr "" #. type: Content of: <section><info><title> #: en/choosePackagesTree.xml:4 msgid "Choose Individual Packages" msgstr "Tria de paquets individuals" #. 2012-12-26 marja - exported this section from choosePackages.xml to start a new page #. type: Content of: <section><mediaobject> #: en/choosePackagesTree.xml:11 msgid "" "<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" align=" "\"center\" format=\"PNG\" ></imagedata> </imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" align=" "\"center\" format=\"PNG\" ></imagedata> </imageobject>" #. type: Content of: <section><para> #: en/choosePackagesTree.xml:17 msgid "" "Here you can add or remove any extra packages to customise your installation." msgstr "" "Aquí podeu afegir o eliminar qualsevol paquet extra per a personalitzar la " "instal·lació." #. type: Content of: <section><para> #: en/choosePackagesTree.xml:20 msgid "" "After having made your choice, you can click on the <guibutton>floppy icon</" "guibutton> at the bottom of the page to save your choice of packages (saving " "to a USB key works, too). You can then use this file to install the same " "packages on another system, by pressing the same button during install and " "choosing to load it." msgstr "" "Després de la tria podeu fer clic a la <guibutton>icona del disquet</" "guibutton> al capdavall de la pàgina per a desar la selecció de paquets " "(també es pot desar en una clau USB). Més endavant podreu utilitzar aquest " "fitxer per instal·lar els mateixos paquets en un altre sistema si premeu el " "mateix botó durant la instal·lació i trieu l'opció de carregar-lo." #. type: Content of: <section><info><title> #: en/configureServices.xml:12 msgid "Configure your Services" msgstr "Configuració dels serveis" #. 2012-12-25 marja - moved this section out of misc-params.xml #. 2013-05-05 marja - added screenshot #. type: Content of: <section><mediaobject> #: en/configureServices.xml:21 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices.png" "\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></" "imagedata> </imageobject>" msgstr "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices.png" "\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></" "imagedata> </imageobject>" #. type: Content of: <section><para> #: en/configureServices.xml:27 msgid "" "Here you can set which services should (not) start when you boot your system." msgstr "" "Aquí podeu establir quins serveis cal (o no) iniciar quan s'engega " "l'ordinador." #. type: Content of: <section><para> #: en/configureServices.xml:30 msgid "" "There are four groups, click on the triangle before a group to expand it and " "see all services in it." msgstr "" "Hi ha quatre grups, feu clic sobre el triangle que hi ha abans de cada grup " "per a expandir-lo i mostrar tots els serveis que conté." #. type: Content of: <section><para> #: en/configureServices.xml:34 msgid "The setting DrakX chose are usually good." msgstr "Generalment, la tria feta per DrakX és la bona." #. type: Content of: <section><para> #: en/configureServices.xml:37 msgid "" "If you highlight a service, some information about it is shown in the info " "box below." msgstr "" "Si realceu un servei, se us en mostrarà informació a la casella inferior." #. type: Content of: <section><para> #: en/configureServices.xml:41 msgid "Only change things when you know very well what you are doing." msgstr "Canvieu coses només si teniu molt clar què esteu fent." #. type: Content of: <section><info><title> #: en/configureTimezoneUTC.xml:3 msgid "Configure your Timezone" msgstr "Configuració de la zona horària" #. 2012-12-25 marja - moved this part out of misc-params.xml #. 2013-05-05 marja - added screenshot #. type: Content of: <section><mediaobject> #: en/configureTimezoneUTC.xml:11 msgid "" "<imageobject condition=\"classical\"> <imagedata xml:id=" "\"configureTimezoneUTC-im1\" revision=\"1\" fileref=\"dx2-" "configureTimezoneUTC.png\" align=\"center\" format=\"PNG\"/> </imageobject> " "<imageobject> <imagedata fileref=\"live-timeZone.png\" condition=\"live\" " "format=\"PNG\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/configureTimezoneUTC.xml:20 msgid "" "Choose your time zone by choosing your country or a city close to you in the " "same time zone." msgstr "" "Trieu la zona horària escollint un país o bé una ciutat propera a la mateixa " "zona horària." #. type: Content of: <section><para> #: en/configureTimezoneUTC.xml:24 msgid "" "In next screen you can choose to set your hardware clock to local time or to " "GMT, also known as UTC." msgstr "" "A la següent pantalla podreu triar si establiu el rellotge de maquinari a " "l'hora local o bé a GMT, també coneguda com a UTC." #. type: Content of: <section><note><para> #: en/configureTimezoneUTC.xml:29 msgid "" "If you have more than one operating system on your computer, make sure they " "are all set to local time, or all to UTC/GMT." msgstr "" "Si teniu més d'un sistema operatiu a l'ordinador, assegureu-vos que tots " "estan configurats a l'hora local, o bé tots a l'hora UTC/GMT." #. type: Content of: <section><info><title> #: en/configureX_card_list.xml:11 msgid "Choose an X Server (Configure your Graphic Card)" msgstr "Tria del servidor de les X (configura la targeta gràfica)" #. type: Content of: <section><mediaobject> #: en/configureX_card_list.xml:16 msgid "" "<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id=" "\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" format=" "\"PNG\"/> </imageobject>" msgstr "" "<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id=" "\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" format=" "\"PNG\"/> </imageobject>" #. type: Content of: <section><para> #: en/configureX_card_list.xml:21 msgid "" "DrakX has a very comprehensive database of video cards and will usually " "correctly identify your video device." msgstr "" "DrakX té una base de dades de targetes de vídeo força completa i normalment " "identifica correctament el dispositiu de vídeo." #. type: Content of: <section><para> #: en/configureX_card_list.xml:24 msgid "" "If the installer has not correctly detected your graphic card and you know " "which one you have, you can select it from the tree by:" msgstr "" "Si l'instal·lador no ha detectat correctament la targeta gràfica i sabeu " "quina és, seleccioneu-la a l'arbre:" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_card_list.xml:27 en/configureX_monitor.xml:69 msgid "vendor" msgstr "fabricant" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_card_list.xml:31 msgid "then the name of your card" msgstr "llavors el nom de la targeta" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_card_list.xml:35 msgid "and the type of card" msgstr "i el tipus de targeta" #. type: Content of: <section><para> #: en/configureX_card_list.xml:39 msgid "" "If you cannot find your card in the vendor lists (because it's not yet in " "the database or it's an older card) you may find a suitable driver in the " "Xorg category" msgstr "" "Si no trobeu la vostra targeta a la llista de proveïdors (perquè encara no " "és a la base de dades o bé perquè és antiga) potser encara podeu trobar un " "controlador adequat a la categoria Xorg" #. type: Content of: <section><para> #: en/configureX_card_list.xml:43 msgid "" "The Xorg listing provides more than 40 generic and open source video card " "drivers. If you still can't find a named driver for your card there is the " "option of using the vesa driver which provides basic capabilities." msgstr "" "El llistat de Xorg proporciona més de 40 controladors genèrics i lliures. Si " "tot i això encara no trobeu el controlador adequat, hi ha l'opció de fer " "servir el controlador VESA, que proporciona funcionalitats bàsiques." #. type: Content of: <section><para> #: en/configureX_card_list.xml:48 msgid "" "Be aware that if you select an incompatible driver you may only have access " "to the Commandline Interface." msgstr "" "Tingueu en compte que si seleccioneu un controlador incompatible, potser " "només teniu accés a la interfície de línia d'ordres." #. type: Content of: <section><para> #: en/configureX_card_list.xml:51 msgid "" "Some video card manufacturers provide proprietary drivers for Linux which " "may only be available in the Nonfree repository and in some cases only from " "the card manufacturers' websites." msgstr "" "Alguns fabricants de targetes de vídeo proporcionen controladors de " "propietat per a Linux, que només estan disponibles al dipòsit Nonfree o bé, " "en alguns casos, als llocs web dels fabricants." #. type: Content of: <section><para> #: en/configureX_card_list.xml:55 msgid "" "The Nonfree repository needs to be explicitly enabled to access them. If " "you didn't select it previously, you should do this after your first reboot." msgstr "" "Cal activar explícitament els dipòsits Nonfree per poder-hi accedir. Si " "encara no ho heu fet, ho podreu fer després que reinicieu per primera vegada." #. type: Content of: <section><info><title> #: en/configureX_chooser.xml:4 msgid "Graphic Card and Monitor Configuration" msgstr "Configuració de targeta gràfica i monitor" #. Marja 2012-08-10, copied setupX.xml to this file and replaced all "setupX" in the code by "configureX_chooser", because this is the correct filename for this page #. type: Content of: <section><mediaobject> #: en/configureX_chooser.xml:11 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureX_chooser.png" "\" align=\"center\" format=\"PNG\" xml:id=\"configureX_chooser-im1\"> </" "imagedata> </imageobject>" msgstr "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureX_chooser.png" "\" align=\"center\" format=\"PNG\" xml:id=\"configureX_chooser-im1\"> </" "imagedata> </imageobject>" #. type: Content of: <section><para> #: en/configureX_chooser.xml:18 msgid "" "No matter which graphical environment (also known as desktop environment) " "you chose for this install of <application>Mageia</application>, they are " "all based on a graphical user interface system called <acronym>X Window " "System</acronym>, or simply <acronym>X</acronym>. So in order for " "<acronym>KDE</acronym>, <acronym>Gnome</acronym>, <acronym>LXDE</acronym> or " "any other graphical environment to work well, the following <acronym>X</" "acronym> settings need to be correct. Choose the correct settings if you can " "see that <application>DrakX</application> didn't make a choice, or if you " "think the choice is incorrect." msgstr "" "Sigui quin sigui l'entorn gràfic (també anomenat entorn d'escriptori) triat " "per a aquesta instal·lació de <application>Mageia</application>, està basat " "en el sistema d'interfície gràfica d'usuari anomenat <acronym>Sistema X " "Window</acronym>, o simplement <acronym>X</acronym>. Per tant, perquè " "<acronym>KDE</acronym>, <acronym>Gnome</acronym>, <acronym>LXDE</acronym> o " "qualsevol altre entorn funcioni bé, cal configurar correctament els següents " "paràmetres de les <acronym>X</acronym>. Si veieu que <application>DrakX</" "application> no ha pogut triar la configuració, o bé si penseu que no ho ha " "fet bé, corregiu-los." #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:31 msgid "" "<emphasis><guibutton>Graphic card</guibutton></emphasis>: Choose your card " "from the list if needed." msgstr "" "<emphasis><guibutton>Targeta gràfica</guibutton></emphasis>: si cal, trieu " "la vostra targeta de la llista." #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:37 msgid "" "<emphasis><guibutton>Monitor</guibutton></emphasis>: You can choose " "<guilabel>Plug'n Play</guilabel> when applicable, or choose your monitor " "from the <guilabel>Vendor</guilabel> or <guilabel>Generic</guilabel> list. " "Choose <guilabel>Custom</guilabel> if you prefer to manually set the " "horizontal and vertical refresh rates of your monitor." msgstr "" "<emphasis><guibutton>Monitor</guibutton></emphasis>: podeu triar " "<guilabel>Plug'n Play</guilabel> quan sigui possible, o bé trieu un monitor " "de la llista de <guilabel>Proveïdor</guilabel> o de <guilabel>Genèric</" "guilabel>. Trieu <guilabel>Personalitzat</guilabel> si preferiu establir " "manualment les freqüències de refresc horitzontal i vertical del monitor." #. type: Content of: <section><itemizedlist><listitem><warning><para> #: en/configureX_chooser.xml:45 msgid "Incorrect refresh rates may damage your monitor" msgstr "Freqüències de refresc incorrectes poden fer malbé el monitor" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:51 msgid "" "<emphasis><guibutton>Resolution</guibutton></emphasis>: Set the desired " "resolution and color depth of your monitor here." msgstr "" "<emphasis><guibutton>Resolució</guibutton></emphasis>: aquí establiu la " "resolució i profunditat de color del monitor." #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:56 msgid "" "<emphasis><guibutton>Test</guibutton></emphasis>: The test button does not " "always appear during install. If the button is there, you can control your " "settings by pressing it. If you see a question asking you whether your " "settings are correct, you can answer \"yes\", and the settings will be kept. " "If you don't see anything, you'll return to the configuration screen and be " "able to reconfigure everything until the test is good. <emphasis>Make sure " "your settings are on the safe side if the test button isn't available</" "emphasis>" msgstr "" "<emphasis><guibutton>Prova</guibutton></emphasis>: el botó de prova no " "sempre apareix durant la instal·lació. Si hi surt i el pressioneu, podeu " "controlar els paràmetres. Si veieu una pregunta sobre si els paràmetres són " "correctes i premeu «sí», els paràmetres es desaran. Si no veieu cap " "pregunta, tornareu a la pantalla de configuració i ho podreu reconfigurar " "tot fins que la prova sigui correcta. <emphasis>Si el botó no està " "disponible, assegureu-vos que la configuració és conservadora</emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:67 msgid "" "<emphasis><guibutton>Options</guibutton></emphasis>: Here you can choose to " "enable or disable various options." msgstr "" "<emphasis><guibutton>Opcions</guibutton></emphasis>: aquí podeu triar " "activar o desactivar diverses opcions." #. type: Content of: <section><info><title> #: en/configureX_monitor.xml:18 msgid "Choosing your Monitor" msgstr "Tria del monitor" #. type: Content of: <section><para> #: en/configureX_monitor.xml:21 msgid "" "DrakX has a very comprehensive database of monitors and will usually " "correctly identify yours." msgstr "" "DrakX té una base de dades de monitors força completa i normalment " "identificarà correctament el vostre." #. type: Content of: <section><warning><para> #: en/configureX_monitor.xml:26 msgid "" "<emphasis>Selecting a monitor with different characteristics could damage " "your monitor or video hardware. Please don't try something without knowing " "what you are doing.</emphasis> If in doubt you should consult your monitor " "documentation" msgstr "" "<emphasis>La selecció d'un monitor amb característiques diferents podria fer " "malbé el monitor o el maquinari de vídeo. No intenteu res si no teniu clar " "què esteu fent.</emphasis> En cas de dubte és recomanable consultar la " "documentació del monitor" #. type: Content of: <section><mediaobject> #: en/configureX_monitor.xml:34 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor." "png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor." "png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </" "imageobject>" #. type: Content of: <section><para> #: en/configureX_monitor.xml:42 msgid "<emphasis>Custom</emphasis>" msgstr "<emphasis>Personalitzat</emphasis>" #. type: Content of: <section><para> #: en/configureX_monitor.xml:44 msgid "" "This option allows you to set two critical parameters, the vertical refresh " "rate and the horizontal sync rate. Vertical refresh determines how often the " "screen is refreshed and horizontal sync is the rate at which scan lines are " "displayed." msgstr "" "Aquesta opció us permet especificar dos paràmetres crítics, la freqüència de " "refresc vertical i la freqüència de sincronisme horitzontal. La freqüència " "de refresc vertical determina a quina freqüència es refresca la pantalla i " "la freqüència de sincronisme horitzontal determina a quina freqüència es " "mostren les línies." #. type: Content of: <section><para> #: en/configureX_monitor.xml:49 msgid "" "It is <emphasis>VERY IMPORTANT</emphasis> that you do not specify a monitor " "type with a sync range that is beyond the capabilities of your monitor: you " "may damage your monitor. If in doubt, choose a conservative setting and " "consult your monitor documentation." msgstr "" "És <emphasis>MOLT IMPORTANT</emphasis> que no especifiqueu un tipus de " "monitor amb un interval de sincronismes que superi les capacitats del vostre " "monitor: podríeu fer-lo malbé. En cas de dubte, trieu una configuració " "conservadora i consulteu la documentació del monitor." #. type: Content of: <section><para> #: en/configureX_monitor.xml:55 msgid "<emphasis>Plug 'n Play</emphasis>" msgstr "<emphasis>Integració automàtica</emphasis>" #. type: Content of: <section><para> #: en/configureX_monitor.xml:58 msgid "" "This is the default option and tries to determine the monitor type from the " "monitor database." msgstr "" "Aquesta és l'opció predeterminada i tracta d'establir el tipus de monitor a " "partir de la base de dades." #. type: Content of: <section><para> #: en/configureX_monitor.xml:63 msgid "<emphasis>Vendor</emphasis>" msgstr "<emphasis>Proveïdor</emphasis>" #. type: Content of: <section><para> #: en/configureX_monitor.xml:65 msgid "" "If the installer has not correctly detected your monitor and you know which " "one you have, you can select it from the tree by selecting:" msgstr "" "Si l'instal·lador no ha detectat correctament el monitor i sabeu quin és, el " "podeu seleccionar de l'arbre:" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_monitor.xml:73 msgid "the monitor manufacturers name" msgstr "el nom dels fabricants del monitor" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_monitor.xml:77 msgid "the monitor description" msgstr "descripció del monitor" #. type: Content of: <section><para> #: en/configureX_monitor.xml:82 msgid "<emphasis>Generic</emphasis>" msgstr "<emphasis>Genèric</emphasis>" #. type: Content of: <section><para> #: en/configureX_monitor.xml:84 msgid "" "selecting this group displays nearly 30 display configurations such as " "1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is " "often a good monitor selection group if you need to use the Vesa card driver " "when your video hardware cannot be determined automatically. Once again it " "may be wise to be conservative in your selections." msgstr "" "Seleccionant aquest grup se us presentaran gairebé 30 configuracions de " "pantalles, per exemple 1024x768 @ 60 Hz i inclou pantalles planes com les " "dels portàtils. Sovint aquest és un bon grup de selecció de monitors en cas " "que feu servir VESA perquè el maquinari de vídeo no ha estat determinat " "automàticament. De nou, sigueu prudents en les vostres seleccions." #. type: Content of: <section><info><title> #: en/diskdrake.xml:6 msgid "Custom disk partitioning with DiskDrake" msgstr "Particions personalitzades del disc amb DiskDrake" #. type: Content of: <section><mediaobject> #: en/diskdrake.xml:10 msgid "" "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake.png" "\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata fileref=\"live-diskdrake.png\" align=\"center\"/> </imageobject>" msgstr "" #. type: Content of: <section><warning><para> #: en/diskdrake.xml:18 msgid "" "If you wish to use encryption on your <literal>/</literal> partition you " "must ensure that you have a separate <literal>/boot</literal> partition. The " "encryption option for the <literal>/boot</literal> partition must NOT be " "set, otherwise your system will be unbootable." msgstr "" "Si voleu utilitzar el xifratge a la partició <literal>/</literal>, assegureu-" "vos que teniu una partició <literal>/boot</literal> separada. Cal que " "l'opció de xifratge estigui deshabilitada per a la partició <literal>/boot</" "literal>. Altrament, el sistema no arrencarà." #. type: Content of: <section><para> #: en/diskdrake.xml:24 msgid "" "Adjust the layout of your disk(s) here. You can remove or create " "partitions, change the filesystem of a partition or change its size and even " "view what is in them before you start." msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:28 msgid "" "There is a tab for every detected hard disk or other storage device, like an " "USB key. For example sda, sdb and sdc if there are three of them." msgstr "" "Hi ha una pestanya per a cada disc dur o altre dispositiu d'emmagatzematge " "detectats, com ara un llapis de memòria USB. Per exemple, sda, sdb i sdc si " "n'hi ha tres." #. type: Content of: <section><para> #: en/diskdrake.xml:31 msgid "" "Push <guibutton>Clear all</guibutton> to wipe all partitions on the selected " "storage device" msgstr "" "Premeu <guibutton>Neteja-ho tot</guibutton> per a eliminar totes les " "particions del dispositiu d'emmagatzematge seleccionat." #. type: Content of: <section><para> #: en/diskdrake.xml:33 msgid "" "For all other actions: click on the desired partition first. Then view it, " "or choose a filesystem and a mount point, resize it or wipe it. " "<guibutton>Toggle to expert mode</guibutton> (or <guibutton>Expert mode</" "guibutton>) gives some more tools like to add a label or to choose a " "partition type." msgstr "" #. type: Content of: <section><para> #: en/diskdrake.xml:38 msgid "Continue until you adjusted everything to your wishes." msgstr "Continueu fins que tot sigui del vostre grat." #. type: Content of: <section><para> #: en/diskdrake.xml:40 msgid "Click <guibutton>Done</guibutton> when you're ready." msgstr "Feu clic a <guibutton>Fet</guibutton> quan estigueu a punt." #. type: Content of: <section><note><para> #: en/diskdrake.xml:43 msgid "" "If you are installing Mageia on an UEFI system, check that an ESP (EFI " "System Partition) is present and correctly mounted on /boot/EFI (see below)" msgstr "" #. type: Content of: <section><note><para><mediaobject> #: en/diskdrake.xml:46 msgid "" "<imageobject condition=\"classical\"><imagedata fileref=\"dx2-diskdrake2.png" "\" align=\"center\"/></imageobject><imageobject condition=\"live" "\"><imagedata align=\"center\" fileref=\"live-diskdrake2.png\"/></" "imageobject>" msgstr "" #. type: Content of: <section><note><para> #: en/diskdrake.xml:46 msgid "<placeholder type=\"mediaobject\" id=\"0\"/>" msgstr "<placeholder type=\"mediaobject\" id=\"0\"/>" #. type: Content of: <section><note><para> #: en/diskdrake.xml:49 msgid "" "If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot " "partition is present and of the correct type" msgstr "" #. type: Content of: <section><note><mediaobject> #: en/diskdrake.xml:51 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks3.png\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><info><title> #: en/doPartitionDisks.xml:7 msgid "Partitioning" msgstr "Particions" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:9 msgid "" "In this screen you can see the content of your hard drive(s) and see the " "solutions the DrakX partitioning wizard found for where to install " "<application>Mageia</application>." msgstr "" "En aquesta pantalla podeu veure en contingut del(s) disc(s) dur(s) i les " "propostes de l'auxiliar de particions de DrakX sobre on instal·lar " "<application>Mageia</application>." #. type: Content of: <section><para> #: en/doPartitionDisks.xml:13 msgid "" "The options available from the list below will vary depending on your " "particular hard drive(s) layout and content." msgstr "" "Les opcions disponibles a la llista de sota poden variar en funció de la " "disposició i contingut del(s) vostre(s) disc(s) dur(s) en particular." #. type: Content of: <section><mediaobject> #: en/doPartitionDisks.xml:17 msgid "" "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" "doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" align=" "\"center\"/> </imageobject>" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:24 msgid "Use Existing Partitions" msgstr "Utilitza les particions existents" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:25 msgid "" "If this option is available, then existing Linux compatible partitions have " "been found and may be used for the installation." msgstr "" "Si aquesta opció està disponible, vol dir que s'han trobat particions " "compatibles amb Linux i es podrien utilitzar per a la instal·lació." #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:27 msgid "Use Free Space" msgstr "Utilitza l'espai lliure" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:27 msgid "" "If you have unused space on your hard drive then this option will use it for " "your new Mageia installation." msgstr "" "Si teniu espai lliure al disc dur, aquesta opció l'aprofitarà per a la " "instal·lació de Mageia." #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:29 msgid "Use Free Space on a Windows Partition" msgstr "Utilitza l'espai lliure en una partició Windows" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:30 msgid "" "If you have unused space on an existing Windows partition, the installer may " "offer to use it." msgstr "" "Si teniu espai lliure en una partició Windows existent, pot ser que " "l'instal·lador us proposi utilitzar-la." #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:32 msgid "" "This can be a useful way of making room for your new Mageia installation, " "but is a risky operation so you should make sure you have backed up all " "important files!" msgstr "" "Aquesta és una bona manera de fer lloc per a la nova instal·lació de Mageia, " "però és una operació arriscada i per tant hauríeu d'estar segur d'haver fet " "una còpia de seguretat dels fitxers importants." #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:35 msgid "" "Note that this involves shrinking the size of the Windows partition. The " "partition must be \"clean\", meaning that Windows must have closed down " "correctly the last time it was used. It must also have been defragmented, " "although this is not a guarantee that all files in the partition have been " "moved out of the area that is about to be used. It is highly recommended to " "back up your personal files." msgstr "" "Tingueu present que això implica encongir la partició de Windows. La " "partició ha d'estar «neta», és a dir, Windows s'ha d'haver tancat " "correctament la darrera vegada que es va fer servir. També cal que hagi " "estat desfragmentada, tot i que això no és garantia que els fitxers de la " "partició hagin estat desplaçats fora de la regió que s'està a punt de fer " "servir. És altament recomanable fer una còpia de seguretat dels fitxers " "personals." #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:41 msgid "" "With this option, the installer displays the remaining Windows partition in " "light blue and the future Mageia partition in dark blue with their intended " "sizes just under. You have the possibility to adapt these sizes by clicking " "and dragging the gap between both partitions. See the screen-shot below." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><mediaobject> #: en/doPartitionDisks.xml:45 msgid "" "<imageobject condition=\"classical\"><imagedata fileref=\"dx2-" "doPartitionDisks2.png\" align=\"center\"/></imageobject><imageobject " "condition=\"live\"><imagedata fileref=\"live-doPartitionDisks2.png\" align=" "\"center\"/></imageobject>" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:45 msgid "Erase and use Entire Disk." msgstr "Esborra i utilitza el disc sencer." #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:46 msgid "This option will use the complete drive for Mageia." msgstr "Aquesta opció utilitzarà tota la unitat per a Mageia." #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:47 msgid "Note! This will erase ALL data on the selected hard drive. Take care!" msgstr "" "Nota! Això esborrarà TOTES les dades del disc dur seleccionat. Vigileu!" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:48 msgid "" "If you intend to use part of the disk for something else, or you already " "have data on the drive that you are not prepared to lose, then do not use " "this option." msgstr "" "Si teniu pensat fer servir part del disc per a alguna altra cosa, o bé ja " "teniu dades al disc que no voleu perdre, llavors no feu servir aquesta opció." #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:51 msgid "Custom disk partitioning" msgstr "Particions personalitzades de disc" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:52 msgid "" "This gives you complete control over the placing of the installation on your " "hard drive(s)." msgstr "" "Aquesta opció us dóna control total sobre la localització de la instal·lació " "al(s) disc(s) dur(s)." #. type: Content of: <section><para> #: en/doPartitionDisks.xml:55 msgid "<emphasis role=\"bold\">Partition sizing:</emphasis>" msgstr "" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:56 msgid "" "The installer will share the available place out according to the following " "rules:" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:58 msgid "" "If the total available place is lower than 50 GB, only one partition is " "created for /, there is no separate partition for /home." msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:60 msgid "" "If the total available place is over 50 GB, then three partitions are created" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:61 msgid "" "6/19 of the total available place is allocated to / with a maximum of 50 GB" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:62 msgid "1/19 is allocated to swap with a maximum of 4 GB" msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:62 msgid "the rest (at least 12/19) is allocated to /home" msgstr "" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:63 msgid "" "That means that from 160 GB and over of available place, the installer will " "create three partitions: 50 GB for /, 4 GB for swap and the rest for /home." msgstr "" #. type: Content of: <section><note><para> #: en/doPartitionDisks.xml:67 msgid "" "If you are using an UEFI system, the ESP (EFI System Partition) will be " "automatically detected, or created if it does not exist yet, and mounted on /" "boot/EFI. The \"Custom disk partitioning\" option is the only one that " "allows to check it has been correctly done" msgstr "" #. type: Content of: <section><note><para> #: en/doPartitionDisks.xml:73 msgid "" "If you are using a Legacy (as known as CSM or BIOS) system with a GPT disk, " "you need to create a Bios boot partition if not already existing. It is an " "about 1 MiB partition with no mount point. Choose <xref linkend=\"diskdrake" "\"/> to be able to create it with the Installer like any other partition, " "just select BIOS boot partition as filesystem type." msgstr "" #. type: Content of: <section><note><mediaobject> #: en/doPartitionDisks.xml:79 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><note><mediaobject> #: en/doPartitionDisks.xml:87 msgid "" "<imageobject> <imagedata fileref=\"dx2-doPartitionDisks4.png\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><warning><para> #: en/doPartitionDisks.xml:93 msgid "" "Some newer drives are now using 4096 byte logical sectors, instead of the " "previous standard of 512 byte logical sectors. Due to lack of available " "hardware, the partitioning tool used in the installer has not been tested " "with such a drive. Also some ssd drives now use an erase block size over 1 " "MB. We suggest to pre-partition the drive, using an alternative partitioning " "tool like gparted, if you own such a device, and to use the following " "settings:" msgstr "" "Alguns discs nous fan servir ara sectors lògics de 4096 bytes, en lloc dels " "sectors lògics de 512 bytes, estàndards fins ara. A causa de la manca de " "maquinari disponible, l'eina de particions utilitzada per l'instal·lador no " "s'ha pogut provar amb un dispositiu d'aquestes característiques. A més, " "alguns discs SSD fan servir actualment un bloc d'esborrament de més d'1 MB. " "Si teniu algun d'aquests dispositius, us recomanem de fer les particions del " "disc prèviament, utilitzant alguna eina de particions alternativa, com ara " "gparted, i feu servir la configuració següent:" #. type: Content of: <section><warning><para> #: en/doPartitionDisks.xml:100 msgid "\"Align to\" \"MiB\"" msgstr "\"Alinea a\" \"MiB\"" #. type: Content of: <section><warning><para> #: en/doPartitionDisks.xml:101 msgid "\"Free space preceding (MiB)\" \"2\"" msgstr "\"Espai lliure que precedeix a (MiB)\" \"2\"" #. type: Content of: <section><warning><para> #: en/doPartitionDisks.xml:102 msgid "" "Also make sure all partitions are created with an even number of megabytes." msgstr "" "Assegureu-vos també que totes les particions s'han creat amb un nombre " "parell de megabytes." #. type: Content of: <article><info><title> #: en/DrakLive-cover.xml:4 en/DrakLive-cover.xml:30 en/DrakLive.xml:3 msgid "Installation from LIVE medium" msgstr "Instal·lació des d'un mitjà AUTÒNOM" #. type: Content of: <book><info> #: en/DrakLive-cover.xml:5 en/DrakX-cover.xml:5 msgid "<publisher> <publishername>Mageia.org</publishername> </publisher>" msgstr "<publisher> <publishername>Mageia.org</publishername> </publisher>" #. type: Content of: <book><info><revhistory><revision><date> #: en/DrakLive-cover.xml:10 msgid "January 2015" msgstr "" #. type: Content of: <book><info><revhistory><revision><revremark> #: en/DrakLive-cover.xml:11 msgid "Mageia 5" msgstr "Mageia 5" #. type: Content of: <book><info><cover><para> #: en/DrakLive-cover.xml:15 en/DrakX-cover.xml:15 msgid "The Official Documentation for Mageia" msgstr "Documentació oficial de Mageia" #. type: Content of: <book><info><cover><mediaobject> #: en/DrakLive-cover.xml:17 en/DrakX-cover.xml:17 msgid "<imageobject> <imagedata fileref=\"mageia-2013.png\"/> </imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"../mageia-2013.png\"/> </imageobject>" #. type: Content of: <article><info><cover><para> #: en/DrakLive-cover.xml:21 en/DrakLive.xml:12 en/DrakX-cover.xml:21 #: en/DrakX.xml:12 msgid "" "The texts and screenshots in this manual are available under the CC BY-SA " "3.0 license <link ns6:href=\"http://creativecommons.org/licenses/by-sa/3.0/" "\">http://creativecommons.org/licenses/by-sa/3.0/</link>." msgstr "" "Els textos i les captures de pantalla d'aquest manual estan disponibles sota " "la llicència CC BY-SA 3.0 <link ns6:href=\"http://creativecommons.org/" "licenses/by-sa/3.0/\">http://creativecommons.org/licenses/by-sa/3.0/</link>." #. type: Content of: <article><info><cover><para> #: en/DrakLive-cover.xml:24 en/DrakLive.xml:15 en/DrakX-cover.xml:24 #: en/DrakX.xml:15 msgid "" "This manual was produced with the help of the <link ns6:href=\"http://www." "calenco.com\">Calenco CMS</link> developed by <link ns6:href=\"http://www." "neodoc.biz\">NeoDoc</link>." msgstr "" "Aquest manual ha estat creat amb l'ajuda de <link ns6:href=\"http://www." "calenco.com\">Calenco CMS</link> desenvolupat per <link ns6:href=\"http://" "www.neodoc.biz\">NeoDoc</link>." #. type: Content of: <article><info><cover><para> #: en/DrakLive-cover.xml:26 en/DrakLive.xml:17 en/DrakX-cover.xml:26 #: en/DrakX.xml:17 msgid "" "It was written by volunteers in their free time. Please contact <link ns6:" "href=\"https://wiki.mageia.org/en/Documentation_team\">Documentation Team</" "link>, if you would like to help improve this manual." msgstr "" "L'han escrit voluntaris durant el seu temps lliure. Si voleu ajudar a " "millorar-lo, contacteu l'<link ns6:href=\"https://wiki.mageia.org/en/" "Documentation_team\">equip de documentació</link>." #. type: Content of: <article><info><cover><para><note> #: en/DrakLive-cover.xml:31 en/DrakLive.xml:6 en/DrakX-cover.xml:37 #: en/DrakX.xml:6 msgid "<note>" msgstr "<note>" #. type: Content of: <article><info><cover><para><note><para> #: en/DrakLive-cover.xml:32 en/DrakLive.xml:7 en/DrakX-cover.xml:38 #: en/DrakX.xml:7 msgid "" "No one will see all the installer screens that you see in this manual. Which " "screens you will see, depends on your hardware and the choices you make " "while installing." msgstr "" "No tothom veurà totes les pantalles d'instal·lació que apareixen en aquest " "manual. Les imatges que veureu dependran del vostre maquinari i de les " "decisions que aneu prenent durant la instal·lació." #. type: Content of: <article><info><cover><para> #: en/DrakLive-cover.xml:35 en/DrakLive.xml:10 en/DrakX-cover.xml:41 #: en/DrakX.xml:10 msgid "</note>" msgstr "</note>" #. type: Content of: <article><info><title> #: en/DrakX-cover.xml:4 en/DrakX-cover.xml:36 en/DrakX.xml:3 msgid "Installation with DrakX" msgstr "Instal·lació amb DrakX" #. type: Content of: <book><info><revhistory><revision><date> #: en/DrakX-cover.xml:10 msgid "February 2014" msgstr "Febrer del 2014" #. type: Content of: <book><info><revhistory><revision><revremark> #: en/DrakX-cover.xml:11 msgid "Mageia 4" msgstr "Mageia 4" #. type: Content of: <section><info><title> #: en/exitInstall.xml:3 msgid "Congratulations" msgstr "Enhorabona" #. Lebarhon 20170209 updated SC #. type: Content of: <section><mediaobject> #: en/exitInstall.xml:7 msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-exitInstall.png\" " "align=\"center\" revision=\"1\" xml:id=\"exitInstall-im1\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:11 msgid "" "You have finished installing and configuring <application>Mageia</" "application> and it is now safe to remove the installation medium and reboot " "your computer." msgstr "" "Heu acabat d'instal·lar i configurar <application>Mageia</application> i ara " "és segur treure el mitjà d'instal·lació i arrencar de nou l'ordinador." #. type: Content of: <section><para> #: en/exitInstall.xml:14 msgid "" "After reboot, in the bootloader screen, you can choose between the operating " "systems on your computer (if you have more than one)." msgstr "" "Després de l'arrencada, a la pantalla del gestor d'arrencada podeu triar " "entre els diversos sistemes operatius instal·lats (si n'hi ha més d'un)." #. type: Content of: <section><para> #: en/exitInstall.xml:17 msgid "" "If you didn't adjust the settings for the bootloader, your Mageia install " "will be automatically selected and started." msgstr "" "Si no heu ajustat els paràmetres del gestor d'arrencada, automàticament se " "seleccionarà i iniciarà la vostra instal·lació de Mageia." #. type: Content of: <section><para> #: en/exitInstall.xml:20 msgid "Enjoy!" msgstr "Gaudiu!" #. type: Content of: <section><para> #: en/exitInstall.xml:21 msgid "" "Visit www.mageia.org if you have any questions or want to contribute to " "Mageia" msgstr "" "Visiteu www.mageia.org si teniu algun dubte o voleu col·laborar amb Mageia." #. type: Content of: <section><info><title> #: en/firewall.xml:3 msgid "Firewall" msgstr "Tallafoc" #. type: Content of: <section><para> #: en/firewall.xml:6 msgid "" "This section allows to configure some simple firewall rules: they determine " "which type of message from the Internet will be accepted by the target " "system. This, in turn, allows the corresponding services on the system to be " "accessible from the Internet." msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:12 msgid "" "In the default setting, no button is checked - no service of the system is " "accessibly from the network. The \"<emphasis>Everything (no firewall)</" "emphasis>\" button has a particular role: it enables access to all services " "of the machine - an option that does not make much sense in the context of " "the installer since it would create a totally unprotected system. Its " "veritable use is in the context of the Mageia Control Center (which uses the " "same GUI layout) for temporarily disabling the entire set of firewall rules " "for testing and debugging purposes." msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:21 msgid "" "All other checkbuttons are more or less self-explanatory. As an example, you " "will check the \"CUPS server\" button if you want printers on your machine " "to be accessible from the network." msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:25 msgid "<emphasis role=\"bold\">Advanced</emphasis>" msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:27 msgid "" "The set of checkbuttons only comprises the most common services. The " "\"Advanced\" button allows to enable messages that correspond to a service " "for which no checkbutton exists. The \"<emphasis>Advanced</emphasis>\" " "button opens a window where you can enable a series of services by typing a " "list of couples (blank separated)" msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:33 msgid "<emphasis><port-number>/<protocol></emphasis>" msgstr "" #. type: Content of: <section><simplelist><member> #: en/firewall.xml:36 msgid "" "- <emphasis><port-number></emphasis> is the value of the port assigned to " "the service you want to enable (e.g. 873 for the RSYNC service) as defined " "in <emphasis>RFC-433</emphasis>;" msgstr "" #. type: Content of: <section><simplelist><member> #: en/firewall.xml:40 msgid "" "- <emphasis><protocol></emphasis> is one of <emphasis>TCP</emphasis> or " "<emphasis>UDP</emphasis> - the internet protocol that is used by the service." msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:45 msgid "" "For instance, the entry for enabling access to the RSYNC service therefore " "is <emphasis>873/tcp</emphasis>." msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:48 msgid "" "In case a service is implemented to use both protocols, you specify 2 " "couples for the same port." msgstr "" #. type: Content of: <section><info><title> #: en/formatPartitions.xml:4 msgid "Formatting" msgstr "Formatació" #. Made by marja on 2012 03 29 #. NEEDS TO BE REVIEWED! #. marja 2012-04-24 added screenshot #. marja 2012-04-24 added emphasis tags in formatPartitions-pa1 #. type: Content of: <section><mediaobject> #: en/formatPartitions.xml:18 msgid "" "<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-" "formatPartitions.png\" format=\"PNG\" align=\"center\" xml:id=" "\"formatPartitions-im1\"> </imagedata> </imageobject> <imageobject " "condition='live'> <imagedata revision=\"1\" fileref=\"live-formatPartitions." "png\" format=\"PNG\" align=\"center\" xml:id=\"live-formatPartitions-im1\"> " "</imagedata> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/formatPartitions.xml:30 msgid "" "Here you can choose which partition(s) you wish to format. Any data on " "partitions <emphasis>not</emphasis> marked for formatting will be saved." msgstr "" "Aquí podeu triar les particions que voleu formatar. Es conservaran totes les " "dades de les particions que <emphasis>no</emphasis> estiguin marcades per a " "formatar." #. type: Content of: <section><para> #: en/formatPartitions.xml:34 msgid "Usually at least the partitions DrakX selected, need to be formatted" msgstr "" "Normalment cal formatar com a mínim les particions seleccionades per DrakX." #. type: Content of: <section><para> #: en/formatPartitions.xml:37 msgid "" "Click on <guibutton>Advanced</guibutton> to choose partitions you want to " "check for so called <emphasis>bad blocks</emphasis>" msgstr "" "Feu clic a <guibutton>Avançat</guibutton> per a triar les particions on " "voleu comprovar si hi ha <emphasis>blocs defectuosos</emphasis>." #. type: Content of: <section><tip><para> #: en/formatPartitions.xml:42 msgid "" "If you're not sure you have made the right choice, you can click on " "<guibutton>Previous</guibutton>, again on <guibutton>Previous</guibutton> " "and then on <guibutton>Custom</guibutton> to get back to the main screen. " "In that screen you can choose to view what is in your partitions." msgstr "" "Si no esteu segur d'haver triat l'opció correcta, podeu clicar a " "<guibutton>Anterior</guibutton>, novament a <guibutton>Anterior</guibutton> " "i llavors a <guibutton>Personalitzat</guibutton> per a tornar a la pantalla " "principal. En aquella pantalla podreu visualitzar el contingut de les " "particions." #. type: Content of: <section><para> #: en/formatPartitions.xml:49 msgid "" "When you are confident about the selection, click on <guibutton>Next</" "guibutton> to continue." msgstr "" "Quan estigueu segur de la selecció feu clic a <guibutton>Següent</guibutton> " "per continuar." #. type: Content of: <section><info><title> #: en/installer.xml:3 msgid "DrakX, the Mageia Installer" msgstr "DrakX, l'instal·lador de Mageia" #. type: Content of: <section><para> #: en/installer.xml:7 msgid "" "Whether you are new to GNU-Linux or an experienced user, the Mageia " "Installer is designed to help make your installation or upgrade as easy as " "possible." msgstr "" "Tant si sou nou en GNU-Linux com si sou un usuari amb experiència, " "l'instal·lador de Mageia està dissenyat per a ajudar-vos a fer la " "instal·lació o actualització tan fàcil com sigui possible." #. type: Content of: <section><para> #: en/installer.xml:11 msgid "" "The initial menu screen has various options, however the default one will " "start the installer, which will normally be all that you will need." msgstr "" "La pantalla del menú inicial té diverses opcions, però l'opció " "predeterminada engegarà l'instal·lador, que normalment és tot el que cal." #. type: Content of: <section><section><title> #: en/installer.xml:16 msgid "Installation Welcome Screen" msgstr "Pantalla de benvinguda de la instal·lació" #. type: Content of: <section><section><section><title> #: en/installer.xml:19 msgid "Using a Mageia DVD" msgstr "Ús d'un DVD de Mageia" #. type: Content of: <section><section><section><para> #: en/installer.xml:21 msgid "" "Here are the default welcome screens when using a Mageia DVD, The first one " "with an UEFI system and the second one with a Legacy system:" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/installer.xml:26 msgid "<imageobject> <imagedata fileref=\"dx-welcome2.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><section><para> #: en/installer.xml:31 msgid "" "From this screen, you can access to options by pressing the \"e\" letter to " "enter the \"edit mode\". To come back to this screen, press either the key " "\"esc\" to quit without saving or press the key \"Ctrl\" or \"F10\" to quit " "with saving." msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/installer.xml:37 msgid "<imageobject> <imagedata fileref=\"dx-welcome.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><section><para> #: en/installer.xml:42 msgid "From this screen, it is possible to set some personal preferences:" msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:45 msgid "" "The language (for the installation only, may be different that the chosen " "language for the system) by pressing the key F2 (Legacy mode only)" msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject> #: en/installer.xml:50 msgid "" "<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>" #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:55 msgid "Use the arrow keys to select the language and press the key Enter." msgstr "" "Utilitzeu les tecles de les fletxes per a seleccionar l'idioma i premeu la " "tecla de retorn." #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:58 msgid "" "Here is for example, the French welcome screen when using a Live DVD/CD. " "Note that the Live DVD/CD menu does not propose: <guilabel>Rescue System</" "guilabel>, <guilabel>Memory test</guilabel> and <guilabel>Hardware Detection " "Tool</guilabel>." msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject> #: en/installer.xml:65 msgid "<imageobject> <imagedata fileref=\"dx-welcome4fr.png\"/> </imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"dx-welcome4fr.png\"/> </imageobject>" #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:72 msgid "Change the screen resolution by pressing the F3 key (Legacy mode only)." msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject> #: en/installer.xml:76 msgid "" "<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>" #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:83 msgid "" "Add some kernel options by pressing the <emphasis role=\"bold\">F6</" "emphasis> key for the legacy mode or the <emphasis role=\"bold\">e</" "emphasis> key for the UEFI mode." msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:85 msgid "" "If the installation fails, then it may be necessary to try again using one " "of the extra options. The menu called by F6 displays a new line called " "<guilabel>Boot options</guilabel> and propose four entries:" msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:90 en/installer.xml:93 msgid "- Default, it doesn't alter anything in the default options." msgstr "- Per defecte, no altera res en les opcions per defecte." #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:96 msgid "" "- No ACPI (Advanced Configuration and Power Interface), power management " "isn't taken into account." msgstr "" "- Sense ACPI (Advanced Configuration and Power Interface), no es té en " "compte la gestió del consum." #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:99 msgid "" "- No Local APIC (Local Advanced Programmable Interrupt Controller), it is " "about CPU interruptions, select this option if you are asked for." msgstr "" "- Sense APIC local (Local Advanced Programmable Interrupt Controller), sobre " "interrupcions de la CPU, seleccioneu aquesta opció si us la demana." #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:103 msgid "" "When you select one of these entries, it modifies the default options " "displayed in the <guilabel>Boot Options</guilabel> line." msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><note><para> #: en/installer.xml:108 msgid "" "In some Mageia releases, it may happen that the entries selected with the " "key F6 does not appear in the <guilabel>Boot Options</guilabel> line, " "however, they are really taken into account." msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject> #: en/installer.xml:115 msgid "" "<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>" #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:122 msgid "Add more kernel options by pressing the key F1 (Legacy mode only)." msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:125 msgid "" "Pressing F1 opens a new window with more available options. Select one with " "the arrow keys and press Enter to have more details or press the Esc key to " "go back to the welcome screen." msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject> #: en/installer.xml:131 msgid "" "<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>" #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:136 msgid "" "The detailed view about the option splash. Press Esc or select " "<guilabel>Return to Boot Options</guilabel> to go back to the options list. " "These options can by added by hand in the <guilabel>Boot options</guilabel> " "line." msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject> #: en/installer.xml:142 msgid "" "<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>" #. type: Content of: <section><section><section><para><itemizedlist><listitem><note><para> #: en/installer.xml:148 msgid "The help is translated in the chosen language with the F2 key." msgstr "Amb la tecla F2 l'ajuda es tradueix a l'idioma seleccionat." #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/installer.xml:152 msgid "" "For more information about kernel options on legacy and UEFI systems, see: " "<link ns2:href=\"https://wiki.mageia.org/en/How_to_set_up_kernel_options" "\">https://wiki.mageia.org/en/How_to_set_up_kernel_options</link>" msgstr "" #. type: Content of: <section><section><section><title> #: en/installer.xml:159 msgid "Using a Wired Network" msgstr "" #. type: Content of: <section><section><section><para> #: en/installer.xml:161 msgid "" "Here is the default welcome screen when using a Wired Network-based " "Installation CD (netinstall.iso or netinstall-nonfree.iso images):" msgstr "" #. type: Content of: <section><section><section><para> #: en/installer.xml:165 msgid "" "It does not allow to change the language, the available options are " "described in the screen. For more information about using a Wired Network-" "based Installation CD, see <link ns2:href=\"https://wiki.mageia.org/en/Boot." "iso_install\">the Mageia Wiki</link>" msgstr "" #. type: Content of: <section><section><section><warning><para> #: en/installer.xml:171 msgid "The keyboard layout is the American one." msgstr "La disposició del teclat és l'americana." #. type: Content of: <section><section><section><mediaobject> #: en/installer.xml:175 msgid "<imageobject> <imagedata fileref=\"../dx-help.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><title> #: en/installer.xml:183 msgid "The installation steps" msgstr "Passos de la instal·lació" #. type: Content of: <section><section><para> #: en/installer.xml:185 msgid "" "The install process is divided into a number of steps, which can be followed " "on the side panel of the screen." msgstr "" "El procés d'instal·lació està dividit en un seguit de passos, que es poden " "veure en el plafó lateral de la pantalla." #. type: Content of: <section><section><para> #: en/installer.xml:188 msgid "" "Each step has one or more screens which may also have <guibutton>Advanced</" "guibutton> buttons with extra, less commonly required, options." msgstr "" "Cada pas té una o més pantalles, que a la vegada poden tenir " "botons<guibutton>Avançat</guibutton> amb opcions suplementàries menys " "habituals." #. type: Content of: <section><section><para> #: en/installer.xml:192 msgid "" "Most screens have <guibutton>Help</guibutton> buttons which give further " "explanations about the current step." msgstr "" "La majoria de les pantalles tenen un botó <guibutton>Ajuda</guibutton> que " "dóna més explicacions sobre el pas actual." #. type: Content of: <section><section><note><para> #: en/installer.xml:196 msgid "" "If somewhere during install you decide to stop the installation, it is " "possible to reboot, but please think twice before you do this. Once a " "partition has been formatted or updates have started to be installed, your " "computer is no longer in the same state and rebooting it could very well " "leave you with an unusable system. If in spite of this you are very sure " "rebooting is what you want, go to a text terminal by pressing the three keys " "<guibutton>Alt Ctrl F2</guibutton> at the same time. After that, press " "<guibutton>Alt Ctrl Delete</guibutton> simultaneously to reboot." msgstr "" "Si en algun moment de la instal·lació decidiu aturar-la, és possible tornar " "a iniciar l'ordinador, però penseu-vos-ho dues vegades abans de fer-ho. Un " "cop s'ha formatat una partició o les actualitzacions s'han començat a " "instal·lar, l'ordinador ja no es troba en el mateix estat, i reiniciar-lo " "podria ben bé deixar-lo inservible. Si tot i això esteu ben segur de voler-" "lo reiniciar, aneu a un terminal de text prement alhora les tres tecles " "<guibutton>Alt Ctrl F2</guibutton>. Després premeu alhora <guibutton>Alt " "Ctrl Delete </guibutton> per a reiniciar." #. type: Content of: <section><section><title> #: en/installer.xml:209 msgid "Installation Problems and Possible Solutions" msgstr "Problemes en la instal·lació i possibles solucions" #. type: Content of: <section><section><section><title> #: en/installer.xml:212 msgid "No Graphical Interface" msgstr "Sense interfície gràfica" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:216 msgid "" "After the initial screen you did not reach the language selection screen. " "This can happen with some graphic cards and older systems. Try using low " "resolution by typing <code>vgalo</code> at the prompt." msgstr "" "Després de la pantalla inicial no arriba a la pàgina de selecció de " "l'idioma. Això pot passar amb algunes targetes gràfiques de sistemes antics. " "Proveu de fer servir una resolució baixa, teclejant <code>vgalo</code> a la " "consola." #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:223 msgid "" "If the hardware is very old, a graphical installation may not be possible. " "In this case it is worth trying a text mode installation. To use this hit " "ESC at the first welcome screen and confirm with ENTER. You will be " "presented with a black screen with the word \"boot:\". Type \"text\" and hit " "ENTER. Now continue with the installation in text mode." msgstr "" #. type: Content of: <section><section><section><title> #: en/installer.xml:234 msgid "The Install Freezes" msgstr "La instal·lació es penja" #. type: Content of: <section><section><section><para> #: en/installer.xml:236 msgid "" "If the system appeared to freeze during the installation, this may be a " "problem with hardware detection. In this case the automatic detection of " "hardware may be bypassed and dealt with later. To try this, type " "<code>noauto</code> at the prompt. This option may also be combined with " "other options as necessary." msgstr "" "Si el sistema sembla que es congela durant la instal·lació, pot ser a causa " "d'un problema en la detecció del maquinari. En aquest cas, podeu saltar la " "detecció automàtica i deixar-la per més tard. Per a provar-ho, teclegeu " "<code>noauto</code> a la consola. Si cal, aquesta opció es pot combinar amb " "d'altres." #. type: Content of: <section><section><section><title> #: en/installer.xml:244 msgid "RAM problem" msgstr "Problema en la RAM" #. type: Content of: <section><section><section><para> #: en/installer.xml:246 msgid "" "These will rarely be needed, but in some cases the hardware may report the " "available RAM incorrectly. To specify this manually, you can use the " "<code>mem=xxxM</code> parameter, where xxx is the correct amount of RAM. e." "g. <code>mem=256M</code> would specify 256MB of RAM." msgstr "" "Això rarament serà necessari, però en alguns casos pot ser que l'informe de " "maquinari indiqui la RAM disponible de forma errònia. Per a especificar-la " "manualment, podeu fer servir el paràmetre <code>mem=xxxM</code>, on xxx és " "la quantitat correcta de RAM. Per exemple, <code>mem=256M</code> " "significaria 256 MB de RAM." #. type: Content of: <section><section><section><title> #: en/installer.xml:253 msgid "Dynamic partitions" msgstr "Particions dinàmiques" #. type: Content of: <section><section><section><para> #: en/installer.xml:255 msgid "" "If you converted your hard disk from \"basic\" format to \"dynamic\" format " "on Microsoft Windows, you must know that it is impossible to install Mageia " "on this disc. To go back to a basic disk, see the Microsoft documentation: " "<link ns2:href=\"http://msdn.microsoft.com/en-us/library/cc776315.aspx" "\">http://msdn.microsoft.com/en-us/library/cc776315.aspx</link>." msgstr "" #. type: Content of: <section><info><title> #: en/installUpdates.xml:3 msgid "Updates" msgstr "Actualitzacions" #. Made by marja on 2012 03 30 #. NEEDS TO BE REVIEWED! #. marja 20120418 removed xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg"" from section tag, trying to restore correct html filename #. marja, 2012-04-24 added screenshot #. type: Content of: <section><mediaobject> #: en/installUpdates.xml:13 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png\" " "format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></imagedata> </" "imageobject>" msgstr "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png\" " "format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></imagedata> </" "imageobject>" #. type: Content of: <section><para> #: en/installUpdates.xml:19 msgid "" "Since this version of <application>Mageia</application> was released, some " "packages will have been updated or improved." msgstr "" "Des del llançament d'aquesta versió de <application>Mageia</application> " "s'han actualitzat o millorat alguns paquets." #. type: Content of: <section><para> #: en/installUpdates.xml:23 msgid "" "Choose <guilabel>yes</guilabel> if you wish to download and install them, " "select <guilabel>no</guilabel> if you don't want to do this now, or if you " "aren't connected to the Internet" msgstr "" "Trieu <guilabel>Sí</guilabel> si voleu baixar-los i instal·lar-los, trieu " "<guilabel>No</guilabel> si no ho voleu fer ara o si no teniu connexió a " "Internet" #. type: Content of: <section><para> #: en/installUpdates.xml:28 msgid "Then press <guibutton>Next</guibutton> to continue" msgstr "Llavors premeu <guibutton>Següent</guibutton> per a continuar." #. type: Content of: <section><info><title> #: en/login.xml:1 msgid "Login screen" msgstr "" #. type: Content of: <section><mediaobject> #: en/login.xml:1 msgid "" "<imageobject><imagedata format=\"PNG\" xml:id=\"login-im1\" fileref=\"live-" "login.png\" align=\"center\" revision=\"1\"/></imageobject>" msgstr "" "<imageobject><imagedata format=\"PNG\" xml:id=\"login-im1\" fileref=\"live-" "login.png\" align=\"center\" revision=\"1\"/></imageobject>" #. type: Content of: <section><mediaobject><caption><para> #: en/login.xml:1 msgid "KDM login screen" msgstr "" #. type: Content of: <section><para> #: en/login.xml:1 msgid "Finally, you will come to the login screen." msgstr "" #. type: Content of: <section><para> #: en/login.xml:1 msgid "" "Enter your user name and user password, and in a few seconds you will find " "yourself with a loaded KDE or GNOME desktop, depending on which live medium " "you used. You can now start using your Mageia installation." msgstr "" #. type: Content of: <section><para> #: en/login.xml:3 msgid "" "You can find another part of our documentation in <link linkend=\"https://" "wiki.mageia.org/en/Category:Documentation\">the Mageia wiki</link>." msgstr "" "Els podeu trobar <link linkend=\"https://wiki.mageia.org/en/Category:" "Documentation\">aquí</link>." #. type: Content of: <section><info><title> #: en/media_selection.xml:3 msgid "Media Selection (Nonfree)" msgstr "Selecció del mitjà (Nonfree)" #. papoteur 2013-04-11 - created #. marja 2013-04-16 added screenshot + made title longer (because it was the same as for add_supplemental_media) #. marja 2013-04-16 s/in/during/ as suggested by Tristan Campbell #. marja 2013-04-17 s/xml:id="media-selection"/xml:id="media_selection"/ (html filename was wrong) #. type: Content of: <section><mediaobject> #: en/media_selection.xml:12 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png" "\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </" "imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png" "\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </" "imageobject>" #. type: Content of: <section><para> #: en/media_selection.xml:18 msgid "" "Here you have the list of available repositories. Not all repositories are " "available, according to which media you use for installing. The repositories " "selection determines which packages will be available for selection during " "the next steps." msgstr "" "Aquí teniu una llista de tots els dipòsits disponibles. No tots els dipòsits " "estan disponibles, depenent del mitjà que feu servir per a la instal·lació. " "La selecció dels dipòsits determina quins paquets es proposaran per a " "seleccionar durant els següents passos." #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:25 msgid "" "The <emphasis>Core</emphasis> repository cannot be disabled as it contains " "the base of the distribution." msgstr "" "No es pot inhabilitar el dipòsit <emphasis>core</emphasis>, ja que conté la " "base de la instal·lació." #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:30 msgid "" "The <emphasis>Nonfree</emphasis> repository includes packages that are free-" "of-charge, i.e. Mageia may redistribute them, but they contain closed-source " "software (hence the name - Nonfree). For example this repository includes " "nVidia and ATI graphics card proprietary drivers, firmware for various WiFi " "cards, etc." msgstr "" "El dipòsit <emphasis>Nonfree</emphasis> inclou paquets gratuïts, i per tant " "Mageia els pot distribuir, però contenen programari no lliure (d'aquí el nom " "- Nonfree). Per exemple, aquest dipòsit inclou pilots de propietat per a " "targetes gràfiques nVidia i ATI, microprogramari per a diverses targetes Wi-" "Fi, etc." #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:38 msgid "" "The <emphasis>Tainted</emphasis> repository includes packages released under " "a free license. The main criteria for placing packages in this repository is " "that they may infringe patents and copyright laws in some countries, e.g. " "Multimedia codecs needed to play various audio/video files; packages needed " "to play commercial video DVD, etc." msgstr "" "El dipòsit <emphasis>Tainted</emphasis> inclou paquets publicats sota una " "llicència lliure. El principal criteri per a posar-los en aquest dipòsit és " "que poden infringir patents o bé lleis de drets de còpia en alguns països. " "Per exemple, els còdecs necessaris per a reproduir diversos fitxers d'àudio " "o de vídeo; paquets per a poder reproduir DVD de vídeo comercials, etc." #. type: Content of: <section><info><title> #: en/minimal-install.xml:12 msgid "Minimal Install" msgstr "Instal·lació mínima" #. type: Content of: <section><para> #: en/minimal-install.xml:19 msgid "" "You can choose a Minimal Installation by de-selecting everything in the " "Package Group Selection screen, see <xref linkend=\"choosePackageGroups\"></" "xref>." msgstr "" "Podeu triar una instal·lació mínima desseleccionant-ho tot a la pantalla de " "selecció de grups de paquets. Vegeu <xref linkend=\"choosePackageGroups\"></" "xref>." #. type: Content of: <section><para> #: en/minimal-install.xml:22 msgid "" "If desired, you can additionally tick the \"Individual package selection\" " "option in the same screen." msgstr "" #. type: Content of: <section><para> #: en/minimal-install.xml:24 msgid "" "Minimal Installation is intended for those with specific uses in mind for " "their <application>Mageia</application>, such as a server or a specialised " "workstation. You will probably use this option combined with the " "\"Individual package selection\" option mentioned above, to fine-tune your " "installation, see <xref linkend=\"choosePackagesTree\"></xref>." msgstr "" #. type: Content of: <section><para> #: en/minimal-install.xml:29 msgid "" "If you choose this installation class, then the related screen will offer " "you a few useful extras to install, such as documentation and X." msgstr "" "Si seleccioneu aquesta classe d'instal·lació, la pantalla següent us " "proposarà d'instal·lar alguns extres útils, com ara la documentació i les X." #. type: Content of: <section><para> #: en/minimal-install.xml:31 msgid "" "If selected, \"With X\" will also include IceWM as lightweight desktop " "environment." msgstr "" #. type: Content of: <section><para> #: en/minimal-install.xml:33 msgid "" "The basic documentation is provided in the form of man and info pages. It " "contains the man pages from the <link xlink:href=\"http://www.tldp.org/" "manpages/man.html\">Linux Documentation Project</link> and the <link xlink:" "href=\"http://www.gnu.org/software/coreutils/manual/\">GNU coreutils</link> " "info pages." msgstr "" #. type: Content of: <section><mediaobject> #: en/minimal-install.xml:41 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png\" " "align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></imagedata> " "</imageobject>" msgstr "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png\" " "align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></imagedata> " "</imageobject>" #. type: Content of: <section><info><title> #: en/misc-params.xml:3 msgid "Summary of miscellaneous parameters" msgstr "Resum dels paràmetres diversos" #. Lebarhon 2016 12 16 updated for Mageia 6. 20170209 updated SC #. type: Content of: <section><mediaobject> #: en/misc-params.xml:10 msgid "" "<imageobject> <imagedata fileref=\"dx2-summaryTop.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/misc-params.xml:15 msgid "" "DrakX made smart choices for the configuration of your system depending on " "the choices you made and on the hardware DrakX detected. You can check the " "settings here and change them if you want after pressing " "<guibutton>Configure</guibutton>." msgstr "" "DrakX ha fet unes tries adequades per a la configuració del sistema, en " "funció de les tries que heu fet i del maquinari detectat. Podeu comprovar " "aquí la configuració i canviar-la prement el botó <guibutton>Configura</" "guibutton>." #. type: Content of: <section><note><para> #: en/misc-params.xml:21 msgid "" "As a general rule, default settings are recommended and you can keep them " "with 3 exceptions:" msgstr "" #. type: Content of: <section><note><para><itemizedlist><listitem><para> #: en/misc-params.xml:24 msgid "there are known issues with a default setting" msgstr "" #. type: Content of: <section><note><para><itemizedlist><listitem><para> #: en/misc-params.xml:28 msgid "the default setting has already been tried and it fails" msgstr "" #. type: Content of: <section><note><para><itemizedlist><listitem><para> #: en/misc-params.xml:32 msgid "something else is said in the detailed sections below" msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:39 msgid "System parameters" msgstr "Paràmetres del sistema" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:44 msgid "<guilabel>Timezone</guilabel>" msgstr "<guilabel>Zona horària</guilabel>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:46 msgid "" "DrakX selected a time zone for you, depending on your preferred language. " "You can change it if needed. See also <xref linkend=\"configureTimezoneUTC\"/" ">" msgstr "" "DrakX us ha triat una zona horària basant-se en l'idioma de preferència. Si " "cal, ho podeu canviar. Vegeu també <xref linkend=\"configureTimezoneUTC\"/>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:52 msgid "<guilabel>Country / Region</guilabel>" msgstr "<guilabel>País / Regió</guilabel>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:55 msgid "" "If you are not in the selected country, it is very important that you " "correct the setting. See <xref linkend=\"selectCountry\"/>" msgstr "" "Si no us trobeu al país seleccionat, és molt important que corregiu la " "configuració. Vegeu <xref linkend=\"selectCountry\"/>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:61 msgid "<guilabel>Bootloader</guilabel>" msgstr "<guilabel>Gestor d'arrencada</guilabel>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:63 msgid "DrakX has made good choices for the bootloader setting." msgstr "" "DraxK ha fet una bona tria per a la configuració del gestor d'arrencada." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:66 msgid "Do not change anything, unless you know how to configure Grub2" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:69 msgid "For more information, see <xref linkend=\"setupBootloader\"/>" msgstr "Per a més informació vegeu <xref linkend=\"setupBootloader\"/>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:74 msgid "<guilabel>User management</guilabel>" msgstr "<guilabel>Gestió d'usuaris</guilabel>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:77 msgid "" "You can add extra users here. They will each get their own <literal>/home</" "literal> directories." msgstr "" "Aquí podeu afegir usuaris suplementaris. Cadascun tindrà el seu propi " "directori <literal>/home</literal>." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:83 msgid "<guilabel>Services</guilabel>:" msgstr "<guilabel>Serveis</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:85 msgid "" "System services refer to those small programs which run the background " "(daemons). This tool allows you to enable or disable certain tasks." msgstr "" "Els serveis de sistema es refereixen a petits programes que corren en segon " "pla (dimonis). Aquesta eina us permet habilitar o inhabilitar determinades " "tasques." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:89 msgid "" "You should check carefully before changing anything here - a mistake may " "prevent your computer from operating correctly." msgstr "" "Penseu-vos-ho bé abans de canviar res aquí - una errada podria fer que " "l'ordinador no funcionés correctament." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:93 msgid "For more information, see <xref linkend=\"configureServices\"/>" msgstr "Per a més informació vegeu <xref linkend=\"configureServices\"/>" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:100 msgid "Hardware parameters" msgstr "Paràmetres del maquinari" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:105 msgid "<guilabel>Keyboard</guilabel>:" msgstr "<guilabel>Teclat</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:107 msgid "" "This is where you setup or change your keyboard layout which will depend on " "your location, language or type of keyboard." msgstr "" "Aquí és on establiu o canvieu la disposició del teclat, que depèn de la " "vostra ubicació, idioma o tipus de teclat." #. type: Content of: <section><section><itemizedlist><listitem><note><para> #: en/misc-params.xml:112 msgid "" "If you notice a wrong keyboard layout and want to change it, keep in mind " "that your passwords are going to change too." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:118 msgid "<guilabel>Mouse</guilabel>:" msgstr "<guilabel>Ratolí</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:120 msgid "" "Here you can add or configure other pointing devices, tablets, trackballs " "etc." msgstr "" "Aquí podeu afegir i configurar altres dispositius apuntadors, tauletes, " "ratolins de bola, etc." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:125 msgid "<guilabel>Sound card</guilabel>:" msgstr "<guilabel>Targeta de so</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:128 msgid "" "The installer uses the default driver, if there is a default one. The option " "to select a different driver is only given when there is more than one " "driver for your card, but none of them is the default one." msgstr "" "L'instal·lador fa servir un controlador predeterminat, si n'hi ha un. " "L'opció de seleccionar un controlador diferent només apareix quan hi ha més " "d'un controlador per a la targeta, però cap d'ells és el predeterminat." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:135 msgid "<guilabel>Graphical interface</guilabel>:" msgstr "<guilabel>Interfície gràfica</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:138 msgid "This section allows you to configure your graphic card(s) and displays." msgstr "" "Aquesta secció us permet configurar la targeta gràfica i les pantalles." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:141 msgid "For more information, see <xref linkend=\"configureX_chooser\"/>." msgstr "Per a més informació vegeu <xref linkend=\"configureX_chooser\"/>." #. type: Content of: <section><section><mediaobject> #: en/misc-params.xml:147 msgid "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"summaryBottom-im1\" align=" "\"center\" fileref=\"dx2-summaryBottom.png\" revision=\"1\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:155 msgid "Network and Internet parameters" msgstr "Paràmetres de xarxa i Internet" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:161 msgid "<guilabel>Network</guilabel>:" msgstr "<guilabel>Xarxa</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:163 msgid "" "You can configure your network here, but for network cards with non-free " "drivers it is better to do that after reboot, in the <application>Mageia " "Control Center</application>, if you have not yet enabled the Nonfree media " "repositories." msgstr "" "Podeu configurar aquí la xarxa, però per a les targetes de xarxa amb " "controladors no lliures, si encara no heu habilitat els dipòsits Nonfree, és " "millor fer-ho després de reiniciar, a l'aplicació <application>Centre de " "control de Mageia</application>." #. type: Content of: <section><section><itemizedlist><listitem><warning><para> #: en/misc-params.xml:170 msgid "" "When you add a network card, do not forget to set your firewall to watch " "that interface as well." msgstr "" "Quan afegiu una targeta de xarxa, no us oblideu de configurar el tallafoc " "perquè vigili també aquella interfície." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:177 msgid "<guilabel>Proxies</guilabel>:" msgstr "<guilabel>Servidors intermediaris</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:179 msgid "" "A Proxy Server acts as an intermediary between your computer and the wider " "internet. This section allows you to configure your computer to utilize a " "proxy service." msgstr "" "Un servidor intermediari actua entre l'ordinador i internet. Aquesta secció " "us permet configurar el vostre ordinador perquè utilitzi un servidor " "intermediari." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:184 msgid "" "You may need to consult your systems administrator to get the parameters you " "need to enter here" msgstr "" "Potser heu de consultar l'administrador de sistemes per a obtenir els " "paràmetres que cal posar aquí" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:193 msgid "Security" msgstr "Seguretat" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:198 msgid "<guilabel>Security Level</guilabel>:" msgstr "<guilabel>Nivell de seguretat</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:201 msgid "" "Here you set the Security level for your computer, in most cases the default " "setting (Standard) is adequate for general use." msgstr "" "Aquí podeu establir el nivell de seguretat de l'ordinador. La majoria de " "vegades la configuració predeterminada (Estàndard) és adequada per a un ús " "general." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:205 msgid "Check the option which best suits your usage." msgstr "Trieu l'opció que millor s'adapta a la vostra utilització." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:210 msgid "<guilabel>Firewall</guilabel>:" msgstr "<guilabel>Tallafoc</guilabel>:" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:212 msgid "" "A firewall is intended to be a barrier between your important data and the " "rascals out there on the internet who would compromise or steal it." msgstr "" "Un tallafoc actua de barrera entre les vostres dades importants i els " "espavilats que ronden per internet amb intenció de comprometre-les o robar-" "les." #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:216 msgid "" "Select the services that you wish to have access to your system. Your " "selections will depend on what you use your computer for. For more " "information, see <xref linkend=\"firewall\"/>." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><warning><para> #: en/misc-params.xml:222 msgid "Bear in mind that allowing everything (no firewall) may be very risky." msgstr "" "Tingueu present que el fet de permetre-ho tot (sense tallafoc) pot ser molt " "arriscat." #. type: Content of: <section><info><title> #: en/reboot.xml:3 msgid "Reboot" msgstr "Reinicia" #. type: Content of: <section><para> #: en/reboot.xml:6 msgid "" "Once the bootloader has been installed, you will be prompted to halt your " "computer, remove the live CD and restart the computer, click on <emphasis " "role=\"bold\"><guibutton>Finish</guibutton></emphasis> and act as " "asked<emphasis role=\"bold\"> in this order!</emphasis>" msgstr "" #. type: Content of: <section><mediaobject> #: en/reboot.xml:11 msgid "<imageobject> <imagedata fileref=\"live-reboot2.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/reboot.xml:15 msgid "" "When you restart, you will see a succession of download progress bars. These " "indicate that the software media lists are being downloaded (see Software " "management)." msgstr "" #. type: Content of: <section><mediaobject> #: en/reboot.xml:17 msgid "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=\"live-" "reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>" msgstr "" #. type: Content of: <section><info><title> #: en/resizeFATChoose.xml:16 msgid "" "Resize <application>Windows<superscript>®</superscript></application> " "partition" msgstr "" "Redimensiona la partició <application>Windows<superscript>®</superscript></" "application>" #. type: Content of: <section><para> #: en/resizeFATChoose.xml:20 msgid "" "You have more than one <application>Windows<superscript>®</superscript></" "application> partition. Choose which one should be made smaller to make " "space for installing <application>Mageia</application>." msgstr "" "Teniu més d'una partició <application>Windows<superscript>®</superscript></" "application>. Trieu quina cal reduir per a fer lloc per a instal·lar " "<application>Mageia</application>." #. type: Content of: <section><info><title> #: en/securityLevel.xml:12 msgid "Security Level" msgstr "Nivell de seguretat" #. 2012-12-25 marja - moved this part out of misc-params.xml" #. 2013-05-05 marja - added screenshot #. type: Content of: <section><mediaobject> #: en/securityLevel.xml:19 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" " "align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> </" "imageobject>" msgstr "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" " "align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> </" "imageobject>" #. type: Content of: <section><para> #: en/securityLevel.xml:24 msgid "You can adjust your security level here." msgstr "Aquí podeu ajustar el nivell de seguretat." #. type: Content of: <section><para> #: en/securityLevel.xml:27 msgid "" "Leave the default settings as they are, if you don't know what to choose." msgstr "Si no sabeu què triar, no toqueu les opcions predeterminades." #. type: Content of: <section><para> #: en/securityLevel.xml:30 msgid "" "After install, it will always be possible to adjust your security settings " "in the <guilabel>Security</guilabel> part of the Mageia Control Center." msgstr "" "Després de la instal·lació sempre és possible ajustar la configuració de " "seguretat a la part de <guilabel>Seguretat</guilabel> del centre de control " "de Mageia." #. type: Content of: <section><info><title> #: en/SelectAndUseISOs2.xml:6 msgid "Select and use ISOs" msgstr "Selecció i utilització de les ISO" #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:9 msgid "Introduction" msgstr "Introducció" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:10 msgid "" "Mageia is distributed via ISO images. This page will help you to choose " "which image match your needs." msgstr "" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:12 msgid "There is two families of media:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:15 msgid "" "Classical installer: After booting the media, it will follow a process " "allowing to choose what to install and how to configure your target system. " "This give you the maximal flexibility for a customized installation, in " "particular to choose which Desktop Environment you will install." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:22 msgid "" "LIVE media: you can boot the media in a real Mageia system without " "installing it, to see what you will get after installation. The " "installation process is simpler, but you get lesser choices." msgstr "" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:28 msgid "Details are given in the next sections." msgstr "" #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:31 msgid "Media" msgstr "Mitjà" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:33 msgid "Definition" msgstr "Definició" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:34 msgid "" "Here, a medium (plural: media) is an ISO image file that allows you to " "install and/or update Mageia and by extension any physical support the ISO " "file is copied to." msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:37 msgid "" "You can find them <link ns4:href=\"http://www.mageia.org/en/downloads/" "\">here</link>." msgstr "" "Els podeu trobar <link ns4:href=\"http://www.mageia.org/en/downloads/" "\">aquí</link>." #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:40 msgid "Classical installation media" msgstr "Mitjans d'instal·lació clàssics" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:42 en/SelectAndUseISOs2.xml:73 #: en/SelectAndUseISOs2.xml:142 msgid "Common features" msgstr "Característiques comunes" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:45 msgid "These ISOs use the traditional installer called drakx." msgstr "Aquestes ISO utilitzen l'instal·lador clàssic anomenat drakx." #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:49 msgid "" "They are able to make a clean install or an update from previous releases." msgstr "" "Poden fer una instal·lació neta o bé una actualització des de versions " "anteriors." #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:53 en/SelectAndUseISOs2.xml:84 #: en/SelectAndUseISOs2.xml:159 msgid "Different media for 32 or 64 bit architectures." msgstr "Mitjans diferents per a les arquitectures de 32 ó 64 bits." #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:56 msgid "" "Some tools are available in the Welcome screen: Rescue System, Memory Test, " "Hardware Detection Tool." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:60 msgid "Each DVD contains many available desktop environments and languages." msgstr "" "Cada DVD conté diversos entorns d'escriptori disponible i diversos idiomes." #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:64 msgid "" "You'll be given the choice during the installation to add non free software." msgstr "" "Durant la instal·lació se us oferirà la possibilitat d'afegir programari de " "propietat." #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:71 msgid "Live media" msgstr "Mitjà autònom" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:76 msgid "" "Can be used to preview the distribution without installing it on a HDD, and " "optionally install Mageia on to your HDD." msgstr "" "Es pot utilitzar per a la vista prèvia de la distribució sense instal·lar-la " "al disc dur, amb la possibilitat d'instal·lar Mageia al vostre disc dur si " "ho voleu." #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:80 msgid "Each ISO contains only one desktop environment (Plasma, GNOME or Xfce)." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:87 msgid "" "<emphasis role=\"bold\">Live ISOs can only be used to create clean " "installations, they cannot be used to upgrade from previous releases.</" "emphasis>" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:92 msgid "They contain non free software." msgstr "Contenen programari de propietat." #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:97 msgid "Live DVD Plasma" msgstr "DVD autònom de Plasma" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:100 msgid "Plasma desktop environment only." msgstr "Només entorn d'escriptori Plasma." #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:103 en/SelectAndUseISOs2.xml:117 #: en/SelectAndUseISOs2.xml:131 msgid "All languages are present." msgstr "Conté tots els idiomes." #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:106 msgid "64 bit architecture only." msgstr "Només l'arquitectura de 64 bits." #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:111 msgid "Live DVD GNOME" msgstr "DVD autònom de GNOME" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:114 msgid "GNOME desktop environment only." msgstr "Només entorn d'escriptori GNOME." #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:120 msgid "64 bit architecture only" msgstr "Només l'arquitectura de 64 bits" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:125 msgid "Live DVD Xfce" msgstr "DVD autònom de Xfce" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:128 msgid "Xfce desktop environment only." msgstr "Només entorn d'escriptori Xfce." #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:134 msgid "32 or 64 bit architectures." msgstr "Arquitectures de 32 ó 64 bits." #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:140 msgid "Boot-only CD media" msgstr "Mitjà de CD de només d'arrencada" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:145 msgid "" "Each one is a small image that contains no more than that which is needed to " "start the drakx installer and find drakx-installer-stage2 and other packages " "that are needed to continue and complete the install. These packages may be " "on the PC hard disk, on a local drive, on a local network or on the Internet." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:153 msgid "" "These media are very light (less than 100 MB) and are convenient when " "bandwidth is too low to download a full DVD, a PC without a DVD drive or a " "PC that can't boot from a USB stick." msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:162 msgid "English language only." msgstr "Només en anglès." #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:167 msgid "netinstall.iso" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:170 msgid "" "Contains only free software, for those people who prefer not to use non-free " "software." msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:175 msgid "netinstall-nonfree.iso" msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:178 msgid "" "Contains non-free software (mostly drivers, codecs...) for people who need " "it." msgstr "" "Conté programari de propietat (principalment controladors, còdecs...) per a " "qui el necessiti." #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:186 msgid "Downloading and Checking Media" msgstr "Baixada i comprovació del mitjà" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:188 msgid "Downloading" msgstr "Baixada" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:189 msgid "" "Once you have chosen your ISO file, you can download it using either http or " "BitTorrent. In both cases, a window gives you some information, such as the " "mirror in use and an opportunity to change if the bandwidth is to low. If " "http is chosen, you may also see something like" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/SelectAndUseISOs2.xml:191 msgid "<imageobject> <imagedata fileref=\"Checking.png\"/> </imageobject>" msgstr "<imageobject> <imagedata fileref=\"Checking.png\"/> </imageobject>" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:195 msgid "" "md5sum and sha1sum are tools to check the ISO integrity. Use only one of " "them. Keep one of them <link linkend=\"integrity\">for further usage</link>. " "Then a window similar to this one appears:" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/SelectAndUseISOs2.xml:199 msgid "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>" msgstr "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:203 msgid "Check the radio button Save File." msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:206 msgid "Checking the integrity of the downloaded media" msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:207 msgid "" "Both checksums are hexadecimal numbers calculated by an algorithm from the " "file to be downloaded. When you ask these algorithms to recalculate this " "number from your downloaded file, either you have the same number and your " "downloaded file is correct, or the number is different and you have a " "failure. A failure infers that you should retry the download or attempt a " "repair using BitTorrent." msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:213 msgid "Open a console, no need to be root, and:" msgstr "Obriu una consola, no cal que sigueu root, i:" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:214 msgid "" "- To use md5sum, type: [sam@localhost]$ <userinput>md5sum path/to/the/image/" "file.iso</userinput>." msgstr "" "- Per a fer servir md5sum, teclegeu: [sam@localhost]$ <userinput>md5sum camí/" "cap/a/la/imatge/fitxer.iso</userinput>." #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:216 msgid "" "- To use sha1sum, type: [sam@localhost]$ <userinput>sha1sum path/to/the/" "image/file.iso</userinput>." msgstr "" "- Per a fer servir sha1sum, teclegeu [sam@localhost]$ <userinput>sha1sum " "camí/cap/a/la/imatge/fitxer.iso</userinput>." #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:218 msgid "" "and compare the obtained number on your computer (you may have to wait for a " "while) with the number given by Mageia. Example:" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/SelectAndUseISOs2.xml:221 msgid "<imageobject> <imagedata fileref=\"../Md5sum.png\"/> </imageobject>" msgstr "<imageobject> <imagedata fileref=\"../Md5sum.png\"/> </imageobject>" #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:229 msgid "Burn or dump the ISO" msgstr "Enregistrament o bolcat de l'ISO" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:230 msgid "" "The checked ISO can now be burned to a CD or DVD or dumped to a USB stick. " "These operations are not a simple copy and aim to make a bootable medium." msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:234 msgid "Burning the ISO to a CD/DVD" msgstr "Gravació de l'ISO a un CD/DVD" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:235 msgid "" "Use whatever burner you wish but ensure the burning device is set correctly " "to <emphasis role=\"bold\">burn an image</emphasis>, burn data or files is " "not correct. There is more information in <link ns4:href=\"https://wiki." "mageia.org/en/Writing_CD_and_DVD_images\">the Mageia wiki</link>." msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:241 msgid "Dump the ISO to a USB stick" msgstr "Bolcat de l'ISO a un llapis de memòria USB" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:242 msgid "" "All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick " "and then use it to boot and install the system." msgstr "" "Totes les ISO de Mageia són híbrides, que vol dir que les podeu «bolcar» a " "un llapis de memòria USB i després fer-lo servir per a arrencar i instal·lar " "el sistema." #. type: Content of: <section><section><section><warning><para> #: en/SelectAndUseISOs2.xml:245 msgid "" "\"Dumping\" an image onto a flash device destroys any previous file-system " "on the device; any other data will be lost and the partition capacity will " "be reduced to the image size." msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:249 msgid "" "To recover the original capacity, you must redo partitioning and re-format " "the USB stick." msgstr "" "Per recuperar la capacitat original, heu de refer les particions i tornar a " "formatar la memòria USB." #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:252 msgid "Using a graphical tool within Mageia" msgstr "" #. type: Content of: <section><section><section><section><para> #: en/SelectAndUseISOs2.xml:253 msgid "" "You can use a graphical tool like <link ns4:href=\"https://wiki.mageia.org/" "en/IsoDumper_Writing_ISO_images_on_USB_sticks\">IsoDumper</link>" msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:256 msgid "Using a graphical tool within Windows" msgstr "" #. type: Content of: <section><section><section><section><para> #: en/SelectAndUseISOs2.xml:257 msgid "You could try:" msgstr "Podeu provar:" #. type: Content of: <section><section><section><section><para> #: en/SelectAndUseISOs2.xml:258 msgid "" "- <link ns4:href=\"http://rufus.akeo.ie/?locale=en_US\">Rufus</link> using " "the \"ISO image\" option;" msgstr "" #. type: Content of: <section><section><section><section><para> #: en/SelectAndUseISOs2.xml:260 msgid "" "- <link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 " "Disk Imager</link>" msgstr "" "- <link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 " "Disk Imager</link>" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:264 msgid "Using Command line within a GNU/Linux system" msgstr "" #. type: Content of: <section><section><section><section><warning><para> #: en/SelectAndUseISOs2.xml:266 msgid "" "It is potentially *dangerous* to do this by hand. You risk to overwrite a " "disc partition if you get the device-ID wrong." msgstr "" #. type: Content of: <section><section><section><section><para> #: en/SelectAndUseISOs2.xml:269 msgid "You can also use the dd tool in a console:" msgstr "També podeu fer servir l'eina dd en una consola:" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:272 msgid "Open a console" msgstr "Obriu una consola" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:275 msgid "" "Become root with the command <userinput>su -</userinput> (don't forget the " "final '-' )" msgstr "" "Convertiu-vos en root amb l'ordre <userinput>su -</userinput> (no oblideu el " "«-» final)" #. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject> #: en/SelectAndUseISOs2.xml:278 msgid "<imageobject> <imagedata fileref=\"../Root.png\"/> </imageobject>" msgstr "<imageobject> <imagedata fileref=\"../Root.png\"/> </imageobject>" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:284 msgid "" "Plug in your USB stick (do not mount it, this also means do not open any " "application or file manager that could access or read it)" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:289 msgid "Enter the command <userinput>fdisk -l</userinput>" msgstr "Introduïu l'ordre <userinput>fdisk -l</userinput>" #. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject> #: en/SelectAndUseISOs2.xml:291 msgid "<imageobject> <imagedata fileref=\"../Fdisk.png\"/> </imageobject>" msgstr "<imageobject> <imagedata fileref=\"../Fdisk.png\"/> </imageobject>" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:295 msgid "" "Alternatively, you can get the device name with the command <code>dmesg</" "code>: at end, you see the device name starting with <emphasis>sd</" "emphasis>, and <emphasis>sdd</emphasis> in this case:" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><screen> #: en/SelectAndUseISOs2.xml:299 #, no-wrap msgid "" "[72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd\n" "[72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000\n" "[72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3\n" "[72594.770536] usb 1-1: Product: Mass Storage Device\n" "[72594.770537] usb 1-1: Manufacturer: JetFlash\n" "[72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB\n" "[72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes\n" "[72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes\n" "[72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected\n" "[72594.772447] scsi host8: usb-storage 1-1:1.0\n" "[72595.963238] scsi 8:0:0:0: Direct-Access JetFlash Transcend 2GB 1100 PQ: 0 ANSI: 4\n" "[72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)\n" "[72595.964104] sd 8:0:0:0: [sdd] Write Protect is off\n" "[72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00\n" "[72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found\n" "[72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through\n" "[72595.967251] <emphasis>sdd</emphasis>: sdd1\n" "[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:319 msgid "" "Find the device name for your USB stick (by its size), for example <code>/" "dev/sdb</code> in the screenshot above, it is a 8GB USB stick." msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:324 msgid "" "Enter the command: # <userinput>dd if=path/to/the/ISO/file of=/dev/sdX " "bs=1M</userinput>" msgstr "" "Introduïu l'ordre: # <userinput>dd if=camí/al/fitxer/ISO of=/dev/sdX bs=1M</" "userinput>" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:326 msgid "Where X=your device name eg: /dev/sdc" msgstr "On X=nom del dispositiu, per exemple: /dev/sdc" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:327 msgid "" "Example: # <userinput>dd if=/home/user/Downloads/Mageia-6-x86_64-DVD.iso of=/" "dev/sdb bs=1M</userinput>" msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:330 msgid "Enter the command: # <userinput>sync</userinput>" msgstr "Introduïu l'ordre: # <userinput>sync</userinput>" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:333 msgid "Unplug your USB stick, it is done" msgstr "Desconnecteu el llapis de memòria USB, ja està" #. type: Content of: <section><info><title> #: en/selectCountry.xml:3 msgid "Select your Country / Region" msgstr "Selecció de país / regió" #. Lebarhon 2016 12 16 updated for Mageia 6 #. type: Content of: <section><mediaobject> #: en/selectCountry.xml:9 msgid "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" align=" "\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/selectCountry.xml:14 msgid "" "Select your country or region. This is important for all kinds of settings, " "like the currency and wireless regulatory domain. Setting the wrong country " "can lead to not being able to use a Wireless network." msgstr "" #. type: Content of: <section><para> #: en/selectCountry.xml:19 msgid "" "If your country isn't in the list, click the <guilabel>Other Countries</" "guilabel> button and choose your country / region there." msgstr "" "Si el vostre país no es troba a la llista, feu clic a <guilabel>Altres " "països</guilabel> i trieu-hi el país o regió." #. type: Content of: <section><note><para> #: en/selectCountry.xml:24 msgid "" "If your country is only in the <guilabel>Other Countries</guilabel> list, " "after clicking <guibutton>OK</guibutton> it may seem a country from the " "first list was chosen. Please ignore this, DrakX will follow your real " "choice." msgstr "" "Si el vostre país es troba únicament dins de la llista d'<guilabel>Altres " "països</guilabel>, després de clicar <guibutton>D'acord</guibutton> podria " "semblar que hi ha seleccionat un dels països de la primera llista. No en feu " "cas, DrakX respectarà la tria." #. type: Content of: <section><section><info><title> #: en/selectCountry.xml:32 msgid "Input method" msgstr "Mètode d'entrada" #. type: Content of: <section><section><para> #: en/selectCountry.xml:35 msgid "" "In the <guilabel>Other Countries</guilabel> screen you can also select an " "input method (at the bottom of the list). Input methods allow users to input " "multilingual characters (Chinese, Japanese, Korean, etc). IBus is the " "default input method, so users should not need to configure it manually. " "Other input methods(SCIM, GCIN, HIME, etc) also provide similar functions " "and can be installed if you added HTTP/FTP media before package selection." msgstr "" #. type: Content of: <section><section><note><para> #: en/selectCountry.xml:44 msgid "" "If you missed the input method setup during installation, you can access it " "after you boot your installed system via \"Configure your Computer\" -> " "\"System\", or by running localedrake as root." msgstr "" #. type: Content of: <section><info><title> #: en/selectInstallClass.xml:21 msgid "Install or Upgrade" msgstr "Instal·lació o actualització" #. type: Content of: <section><mediaobject> #: en/selectInstallClass.xml:25 msgid "" "<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" align=" "\"center\" format=\"PNG\"></imagedata> </imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" align=" "\"center\" format=\"PNG\"></imagedata> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:32 msgid "Install" msgstr "Instal·la" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:34 msgid "" "Use this option for a fresh <application>Mageia</application> installation." msgstr "" "Utilitzeu aquesta opció per a una nova instal·lació de <application>Mageia</" "application>." #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:39 msgid "Upgrade" msgstr "Actualització" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:41 msgid "" "If you have one or more <application>Mageia</application> installations on " "your system, the installer will allow you to upgrade one of them to the " "latest release." msgstr "" "Si teniu una o més instal·lacions de <application>Mageia</application> en el " "sistema, l'instal·lador us permetrà actualitzar-ne una a la darrera versió." #. type: Content of: <section><itemizedlist><listitem><warning><para> #: en/selectInstallClass.xml:45 msgid "" "Only upgrading from a previous Mageia version that was <emphasis>still " "supported</emphasis> when this installer's version was released, has been " "thoroughly tested. If you want to upgrade a Mageia version that had already " "reached its End\tOf Life when this one was released, then it is better to do " "a clean install while preserving your <literal>/home</literal> partition." msgstr "" "Només s'ha provat completament l'actualització a partir d'una versió de " "Mageia que <emphasis>encara fos compatible</emphasis> en el moment de " "publicació d'aquesta versió. Si partiu d'una versió de Mageia que hagués " "arribat a la fi de vida quan es va publicar aquesta, llavors és molt millor " "fer una instal·lació neta, conservant la partició <literal>/home</literal>." #. type: Content of: <section><note><para> #: en/selectInstallClass.xml:56 msgid "" "If during install you decide to stop the installation, it is possible to " "reboot, but please think twice before you do this. Once a partition has been " "formatted or updates have started to be installed, your computer isn't in " "the same state anymore and rebooting it could very well leave you with an " "unusable system. If in spite of that you are very sure rebooting is what you " "want, go to a text terminal by pressing the three keys <guilabel>Alt Ctrl " "F2</guilabel> at the same time. After that, press <guilabel>Alt Ctrl Delete</" "guilabel> simultaneously to reboot." msgstr "" "Si durant la instal·lació decidiu aturar-la, és possible reiniciar " "l'ordinador, però penseu-vos-ho bé abans de fer-ho. Un cop s'ha formatat una " "partició o bé s'han començat a instal·lar les actualitzacions, l'ordinador " "ja no es troba en el mateix estat de partida, i el fet de reiniciar-lo " "podria fer que l'ordinador ja no es pogués fer servir. Si, tot i això, esteu " "molt segur del que voleu, aneu a una terminal de text prement alhora " "<guibutton>Alt Ctrl F2</guibutton>. Després, premeu <guibutton>Alt Ctrl " "Delete</guibutton> alhora per a reiniciar." #. type: Content of: <section><tip><para> #: en/selectInstallClass.xml:67 msgid "" "If you have discovered that you forgot to select an additional language, you " "can return from the \"Install or Upgrade\" screen to the language choice " "screen by pressing <guilabel>Alt Ctrl Home</guilabel>. Do <emphasis>not</" "emphasis> do this later in the install." msgstr "" "Si us adoneu que us heu oblidat de seleccionar un idioma addicional, podeu " "tornar des de la pantalla «Instal·la o actualitza» cap a la pantalla de " "selecció d'idioma prement <guilabel>Alt Ctrl Inici</guilabel>. <emphasis>No</" "emphasis> ho feu més endavant en la instal·lació." #. type: Content of: <section><info><title> #: en/selectKeyboardLive.xml:3 msgid "Select keyboard" msgstr "" #. type: Content of: <section><mediaobject> #: en/selectKeyboardLive.xml:7 msgid "" "<imageobject> <imagedata xml:id=\"selectKeyboardLive-im1\" revision=\"1\" " "align=\"center\" format=\"PNG\" fileref=\"live-selectKeyboard.png\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><para> #: en/selectKeyboardLive.xml:12 msgid "" "You will be required to set the keyboard layout you wish to use in Mageia​​. " "The default one is selected according to your language and timezone " "previously selected." msgstr "" #. type: Content of: <section><info><title> #: en/selectKeyboard.xml:14 msgid "Keyboard" msgstr "Teclat" #. type: Content of: <section><para> #: en/selectKeyboard.xml:17 msgid "" "DrakX selects an appropriate keyboard for your language. If no suitable " "keyboard is found it will default to a US keyboard layout." msgstr "" "DrakX selecciona el teclat adequat per al vostre idioma. Si no en troba cap, " "triarà la disposició de teclat US." #. type: Content of: <section><mediaobject> #: en/selectKeyboard.xml:22 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png" "\" /> </imageobject>" msgstr "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png" "\" /> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:30 msgid "" "Make sure that the selection is correct or choose another keyboard layout. " "If you don't know which layout your keyboard has, look in the specifications " "that came with your system, or ask the computer vendor. There may even be a " "label on the keyboard that identifies the layout. You can also look here: " "<link xlink:href=\"http://en.wikipedia.org/wiki/Keyboard_layout\">en." "wikipedia.org/wiki/Keyboard_layout</link>" msgstr "" "Assegureu-vos que la selecció és correcta o seleccioneu una altra disposició " "de teclat. Si no sabeu quina disposició té el vostre teclat, mireu a les " "especificacions lliurades amb el vostre sistema, o bé pregunteu-ho al " "proveïdor. Fins i tot pot ser que hi hagi una etiqueta al teclat que " "n'identifiqui la disposició. També podeu mirar aquí: <link xlink:href=" "\"http://ca.wikipedia.org/wiki/Mapes_de_teclats\"> ca.wikipedia.org/wiki/" "Mapes_de_teclats</link>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:40 msgid "" "If your keyboard isn't in the list shown, click on <guibutton>More</" "guibutton> to get a full list, and select your keyboard there." msgstr "" "Si el vostre teclat no apareix a la llista mostrada, cliqueu a " "<guibutton>Més </guibutton> per a obtenir la llista completa, i seleccioneu-" "hi el teclat." #. type: Content of: <section><itemizedlist><listitem><para><warning><para> #: en/selectKeyboard.xml:45 msgid "" "After choosing a keyboard from the <guibutton>More</guibutton> dialog, " "you'll return to the first keyboard choice dialog and it will seem as though " "a keyboard from that screen was chosen. You can safely ignore this anomaly " "and continue the installation: Your keyboard is the one you chose from the " "full list." msgstr "" "Un cop triat el teclat al diàleg de <guibutton>Més</guibutton>, tornareu al " "diàleg original de selecció de teclat, i semblarà que hàgiu triat un dels " "teclats que hi apareixen. Podeu ignorar tranquil·lament aquesta anomalia i " "continuar la instal·lació: el teclat que val és el que heu triat a la llista " "completa." #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:55 msgid "" "If you choose a keyboard based on non-Latin characters, you will see an " "extra dialog screen asking how you would prefer to switch between the Latin " "and non-Latin keyboard layouts" msgstr "" "Si trieu un teclat basat en caràcters no llatins, veureu una pantalla de " "diàleg extra que us preguntarà com preferiu alternar entre les disposicions " "de teclat llatines i no llatines." #. type: Content of: <section><info><title> #: en/selectLanguage.xml:10 msgid "Please choose a language to use" msgstr "Trieu l'idioma que voleu utilitzar" #. type: Content of: <section><para> #: en/selectLanguage.xml:12 msgid "" "Select your preferred language, by first expanding the list for your " "continent. <application>Mageia</application> will use this selection during " "the installation and for your installed system." msgstr "" "Seleccioneu l'idioma preferit, desplegant primer la llista corresponent al " "vostre continent. <application>Mageia</application> farà servir aquesta " "selecció durant la instal·lació i per al sistema instal·lat." #. type: Content of: <section><para> #: en/selectLanguage.xml:16 msgid "" "Select your preferred language. <application>Mageia</application> will use " "this selection during the installation and for your installed system." msgstr "" #. type: Content of: <section><para> #: en/selectLanguage.xml:19 msgid "" "If it is likely that you will require several languages installed on your " "system, for yourself or other users, then you should use the " "<guibutton>Multiple languages</guibutton> button to add them now. It will be " "difficult to add extra language support after installation." msgstr "" "Si és probable que us calguin diversos idiomes instal·lats al sistema, tant " "per un o diversos usuaris, hauríeu d'utilitzar el botó <guibutton>Diversos " "idiomes</guibutton> i afegir-los ara. Serà difícil afegir els idiomes extres " "un cop feta la instal·lació." #. type: Content of: <section><mediaobject> #: en/selectLanguage.xml:25 msgid "" "<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref=" "\"dx2-selectLanguage.png\" align=\"center\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata fileref=\"live-language.png\" format=\"\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><warning><para> #: en/selectLanguage.xml:33 msgid "" "Even if you choose more than one language, you must first choose one of them " "as your preferred language in the first language screen. It will also be " "marked as chosen in the multiple languages screen ." msgstr "" "Encara que trieu més d'un idioma, n'heu de triar un com a l'idioma de " "preferència a la pantalla de primer idioma. També es marcarà com a " "seleccionat a la pantalla de diversos idiomes." #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:39 msgid "" "If your keyboard language is not the same as your preferred language, then " "it is advisable to install the language of your keyboard as well." msgstr "" "Si l'idioma del vostre teclat no es correspon amb l'idioma preferit, llavors " "és recomanable instal·lar també l'idioma del vostre teclat." #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:44 msgid "Mageia uses UTF-8 (Unicode) support by default." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:45 msgid "" "This may be disabled in the \"multiple languages\" screen if you know that " "it is inappropriate for your language. Disabling UTF-8 applies to all " "installed languages." msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:50 msgid "" "You can change the language of your system after installation in the Mageia " "Control Center -> System -> Manage localization for your system." msgstr "" #. type: Content of: <section><info><title> #: en/selectMouse.xml:4 msgid "Select mouse" msgstr "Selecció del ratolí" #. Made by marja on 2012 04 11 #. NEEDS TO BE REVIEWED! #. adding some "real" text now that we know the page shows up in the right place #. marja 2012-04-24 adding screenshot #. type: Content of: <section><mediaobject> #: en/selectMouse.xml:16 msgid "" "<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" " "format=\"PNG\" > </imagedata> </imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" " "format=\"PNG\" > </imagedata> </imageobject>" #. type: Content of: <section><para> #: en/selectMouse.xml:23 msgid "" "If you are not happy with how your mouse responds, you can select a " "different one here." msgstr "" "Si no us agrada com respon el ratolí, aquí en podeu seleccionar un altre." #. type: Content of: <section><para> #: en/selectMouse.xml:25 msgid "" "Usually, <guilabel>Universal</guilabel> - <guilabel>Any PS/2 and USB mice</" "guilabel> is a good choice." msgstr "" "Normalment, <guilabel>Universal</guilabel> - <guilabel>Qualsevol ratolí PS/2 " "i USB</guilabel> és la millor tria." #. type: Content of: <section><para> #: en/selectMouse.xml:27 msgid "" "Select <guilabel>Universal</guilabel> - <guilabel>Force evdev</guilabel> to " "configure the buttons that do not work on a mouse with six or more buttons." msgstr "" "Seleccioneu <guilabel>Universal</guilabel> - <guilabel>Força evdev</" "guilabel> per a configurar els botons que no funcionen en un ratolí de sis " "botons o més." #. type: Content of: <section><info><title> #: en/setupBootloaderAddEntry.xml:6 msgid "Add or Modify a Boot Menu Entry" msgstr "Addició o modificació d'una entrada al menú d'arrencada" #. type: Content of: <section><para> #: en/setupBootloaderAddEntry.xml:9 msgid "" "To do that you need to manually edit /boot/grub2/custom.cfg or use the " "software grub-customizer instead (Available in the Mageia repositories)." msgstr "" #. type: Content of: <section><note><para> #: en/setupBootloaderAddEntry.xml:13 msgid "" "For more information, see our wiki: <link ns2:href=\"https://wiki.mageia.org/" "en/Grub2-efi_and_Mageia\">https://wiki.mageia.org/en/Grub2-efi_and_Mageia</" "link>" msgstr "" #. type: Content of: <section><info><title> #: en/setupBootloader.xml:9 msgid "Bootloader main options" msgstr "Opcions principals del menú d'arrencada" #. type: Content of: <section><section><title> #: en/setupBootloader.xml:13 msgid "Bootloader interface" msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:15 msgid "By default, Mageia uses exclusively:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:19 msgid "" "Grub2 (with or without graphical menu) for a Legacy/MBR or Legacy/GPT system" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:24 msgid "Grub2-efi for a UEFI system." msgstr "" #. type: Content of: <section><section><tip><para> #: en/setupBootloader.xml:29 msgid "The Mageia graphical menus are nice :)" msgstr "Els menús gràfics de Mageia són bonics :)" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:33 msgid "Grub2 on Legacy/MBR and Legacy/GPT systems" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/setupBootloader.xml:36 msgid "" "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" "setupBootloader.png\" align=\"center\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata xml:id=\"setupBootloader-im1\" fileref=\"live-" "setupBootloader.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:45 en/setupBootloader.xml:73 msgid "" "Don't modify the \"Boot Device\" unless you really know what you are doing." msgstr "" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:50 msgid "Grub2-efi on UEFI systems" msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:52 msgid "" "With an UEFI system, the user interface is slightly different as you cannot " "choose between with or without graphical menu" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/setupBootloader.xml:56 msgid "" "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" "setupBootloader2.png\" align=\"center\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata fileref=\"live-setupBootloader2.png\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:65 msgid "" "If Mageia is the only system installed on your computer, the installer " "created an ESP (EFI System Partition) to receive the bootloader (Grub2-efi). " "If there are already UEFI operating systems installed on your computer " "(Windows 8 for example), the Mageia installer detects the existing ESP " "created by Windows and adds grub2-efi. Although it is possible to have " "several ESPs, only one is advised and enough whatever the number of " "operating systems you have." msgstr "" #. type: Content of: <section><section><title> #: en/setupBootloader.xml:79 msgid "Using a Mageia bootloader" msgstr "Ús del gestor d'arrencada de Mageia" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:81 msgid "By default, according to your system, Mageia writes a new:" msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:85 msgid "" "GRUB2 bootloader either into the MBR (Master Boot Record) of your first hard " "drive or in the BIOS boot partition." msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:90 msgid "Grub2-efi bootloader into the ESP" msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:94 msgid "" "If you already have other operating systems installed, Mageia attempts to " "add them to your new Mageia boot menu. If you don't want this behaviour, " "click on <guibutton>Next</guibutton> and then uncheck the box " "<guilabel>Probe Foreign OS</guilabel>" msgstr "" #. type: Content of: <section><section><mediaobject> #: en/setupBootloader.xml:100 msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata fileref=\"live-setupBootloader3.png\" align=\"center\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><section><title> #: en/setupBootloader.xml:111 msgid "Using an existing bootloader" msgstr "Ús d'un gestor d'arrencada existent" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:113 msgid "" "The exact procedure for adding your Mageia system to an existing bootloader " "is beyond the scope of this help, however in most cases it will involve " "running the relevant bootloader installation program which should detect and " "add it automatically. See the documentation for the operating system in " "question." msgstr "" "El procediment exacte per a afegir Mageia a un gestor d'arrencada ja " "existent està fora de l'abast d'aquesta ajuda, tot i que normalment " "implicarà executar el programa d'instal·lació del gestor d'arrencada en " "qüestió, que el detectarà i afegirà automàticament. Vegeu la documentació " "del sistema operatiu corresponent." #. type: Content of: <section><section><title> #: en/setupBootloader.xml:121 msgid "Using chain loading" msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:123 msgid "" "If you don't want a bootable Mageia, but to chain load it from another OS, " "click on <guibutton>Next</guibutton>, then on <guibutton>Advanced</" "guibutton> and Check the box <guilabel>Do not touch ESP or MBR</guilabel>." msgstr "" #. type: Content of: <section><section><mediaobject> #: en/setupBootloader.xml:129 msgid "" "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" "setupBootloader4.png\" align=\"center\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata fileref=\"live-setupBootloader4.png\" align=" "\"center\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><para> #: en/setupBootloader.xml:138 msgid "" "You will get a warning that the bootloader is missing, ignore it by clicking " "<guibutton>OK</guibutton>." msgstr "" #. type: Content of: <section><section><mediaobject> #: en/setupBootloader.xml:142 msgid "" "<imageobject> <imagedata fileref=\"live-setupBootloader5.png\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><section><title> #: en/setupBootloader.xml:149 msgid "Options" msgstr "Opcions" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:152 msgid "First page" msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/setupBootloader.xml:156 msgid "" "<guilabel>Delay before booting the default image</guilabel>: This text box " "lets you set a delay in seconds before the default operating system is " "started up." msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/setupBootloader.xml:162 msgid "" "<guilabel>Security</guilabel>: This allows you to set a password for the " "bootloader. This means a username and password will be asked at the boot " "time to select a booting entry or change settings. The username is \"root\" " "and the password is the one chosen here after." msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/setupBootloader.xml:170 msgid "" "<guilabel>Password</guilabel>: This text box is where you actually put the " "password" msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><para> #: en/setupBootloader.xml:175 msgid "" "<guilabel>Password (again)</guilabel>: Retype the password and Drakx will " "check that it matches with the one set above." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:181 en/setupBootloader.xml:239 msgid "<guilabel>Advanced</guilabel>" msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para> #: en/setupBootloader.xml:185 msgid "" "<guilabel>Enable ACPI:</guilabel> ACPI (Advanced Configuration and Power " "Interface) is a standard for the power management. It can save energy by " "stopping unused devices, this was the method used before APM. Unchecking it " "could be useful if, for example, your computer does not support ACPI or if " "you think the ACPI implementation might cause some problems (for instance " "random reboots or system lockups)." msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para> #: en/setupBootloader.xml:195 msgid "" "<guilabel>Enable SMP</guilabel>: This option enables / disables symmetric " "multiprocessing for multi core processors." msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para> #: en/setupBootloader.xml:201 msgid "" "<guilabel>Enable APIC</guilabel>: Enabling or disabling this gives the " "operating system access to the Advanced Programmable Interrupt Controller. " "APIC devices permit more complex priority models, and Advanced IRQ " "(Interrupt Request) management." msgstr "" #. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para> #: en/setupBootloader.xml:209 msgid "" "<guilabel>Enable Local APIC</guilabel>: Here you can set local APIC, which " "manages all external interrupts for a specific processor in an SMP system." msgstr "" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:219 msgid "Next page" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:223 msgid "<guilabel>Default:</guilabel> Operating system started up by default" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:228 msgid "" "<guilabel>Append:</guilabel> This option lets you pass the kernel " "information or tell the kernel to give you more information as it boots." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:234 msgid "" "<guilabel>Probe foreign OS</guilabel>: see above <link linkend=" "\"setupMageiaBootloader\">Using a Mageia bootloader</link>" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para><itemizedlist><listitem><para> #: en/setupBootloader.xml:241 msgid "" "<guilabel>Video mode:</guilabel> This sets the screen size and colour depth " "the boot menu will use. If you click the down triangle you will be offered " "other size and colour depth options." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para><itemizedlist><listitem><para> #: en/setupBootloader.xml:248 msgid "" "<emphasis role=\"bold\">Do not touch ESP or MBR</emphasis>: see above <link " "linkend=\"setupChainLoading\">Using the chain loading</link>" msgstr "" #. type: Content of: <section><info><title> #: en/setupSCSI.xml:11 msgid "Setup SCSI" msgstr "Configuració SCSI" #. Made by marja on 2012 04 02 #. NEEDS TO BE REVIEWED! #. JohnR - edited 2012-03-03 #. SimonNZG has reviewed 2012-04-03 (changed editted to edited in JohnR's comment ;-) #. barjac has re-reviewed and made some minor tweaks. Revisions incremented. #. marja 2012-04-24 added screenshot #. marja 2012-04-25 replacing John's version 1.6 because that one was based on the #. Mdv doc instead of on our setupSCSI file #. type: Content of: <section><mediaobject> #: en/setupSCSI.xml:26 msgid "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" format=" "\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> </imageobject>" msgstr "" "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" format=" "\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> </imageobject>" #. type: Content of: <section><para> #: en/setupSCSI.xml:32 msgid "" "DrakX usually detects hard disks correctly. With some older SCSI controllers " "it may be unable to determine the correct drivers to use and subsequently " "fail to recognise the drive." msgstr "" "DrakX acostuma a detectar correctament els discs durs. Amb alguns " "controladors SCSI antics, potser no és capaç de determinar correctament els " "controladors que cal utilitzar, i per tant no pot reconèixer el disc." #. type: Content of: <section><para> #: en/setupSCSI.xml:36 msgid "" "If this happens, you will need to manually tell Drakx which SCSI drive(s) " "you have." msgstr "" "Si passa això, caldrà indicar manualment a DrakX quins són els discs SCSI." #. type: Content of: <section><para> #: en/setupSCSI.xml:39 msgid "DrakX should then be able to configure the drive(s) correctly." msgstr "" "Llavors DrakX hauria de ser capaç de configurar els discs correctament." #. type: Content of: <section><info><title> #: en/soundConfig.xml:3 msgid "Sound Configuration" msgstr "Configuració del so" #. Lebarhon 20170209 updated SC #. type: Content of: <section><mediaobject> #: en/soundConfig.xml:9 msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-soundConfig.png\" xml:" "id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/soundConfig.xml:14 msgid "" "In this screen the name of the driver that the installer chose for your " "sound card is given, which will be the default driver if we have a default " "one." msgstr "" "En aquesta pantalla es mostra el nom del controlador que l'instal·lador ha " "triat per a la targeta de so, que serà el predeterminat si n'hi ha un." #. type: Content of: <section><para> #: en/soundConfig.xml:18 msgid "" "The default driver should work without problems. However, if after install " "you do encounter problems, then run <command>draksound</command> or start " "this tool via MCC (Mageia Control Center), by choosing the " "<guilabel>Hardware</guilabel> tab and clicking on <guilabel>Sound " "Configuration</guilabel> at the top right of the screen." msgstr "" "El controlador predeterminat hauria de funcionar sense problemes. Tot i " "això, si després de la instal·lació trobeu algun problema, executeu " "<command>draksound</command> o bé inicieu aquesta eina des de l'MCC (centre " "de control de Mageia), triant la pestanya <guilabel>Maquinari</guilabel> i " "clicant a <guilabel>Configuració del so</guilabel> a la part superior dreta " "de la pantalla." #. type: Content of: <section><para> #: en/soundConfig.xml:24 msgid "" "Then, in the draksound or \"Sound Configuration\" tool screen, click on " "<guibutton>Advanced</guibutton> and then on <guibutton>Troubleshooting</" "guibutton> to find very useful advice about how to solve the problem." msgstr "" "Llavors, a la pantalla de l'eina draksound o «Configuració del so», feu clic " "a <guibutton>Avançat</guibutton> i després a <guibutton>Solució de " "problemes</guibutton> per a trobar consells molt útils per a resoldre el " "problema." #. type: Content of: <section><section><info><title> #: en/soundConfig.xml:31 msgid "Advanced" msgstr "Avançat" #. type: Content of: <section><section><para> #: en/soundConfig.xml:34 msgid "" "Clicking <guibutton>Advanced</guibutton> in this screen, during install, is " "useful if there is no default driver and there are several drivers " "available, but you think the installer selected the wrong one." msgstr "" "Clicar a <guibutton>Avançat</guibutton> en aquesta pantalla durant la " "instal·lació és útil si no hi ha cap controlador predeterminat i n'hi ha " "diversos de disponibles, però creieu que l'instal·lador n'ha seleccionat un " "d'equivocat." #. type: Content of: <section><section><para> #: en/soundConfig.xml:39 msgid "" "In that case you can select a different driver after clicking on " "<guibutton>Let me pick any driver</guibutton>." msgstr "" "En aquest cas podeu seleccionar un controlador diferent després de fer clic " "a <guibutton>Deixa'm triar un controlador</guibutton>." #. type: Content of: <section><info><title> #: en/takeOverHdConfirm.xml:4 msgid "Confirm hard disk to be formatted" msgstr "Confirmació del disc dur que es formatarà" #. Made by marja on 2012 04 03 #. test comment - johnr #. 2012-04-24 marja - replaced "if you are not sure you selected the correct #. hard disk." with "if you are not sure about your choice", because I'm sure I #. saw this help screen when I had only one HD #. 2013-05-05 marja added screenshot #. type: Content of: <section><mediaobject> #: en/takeOverHdConfirm.xml:19 msgid "" "<imageobject condition='live'> <imagedata fileref=\"live-takeOverHdConfirm." "png\" format=\"PNG\" align=\"center\" ></imagedata> </imageobject> " "<imageobject condition='classical'> <imagedata fileref=\"dx2-" "takeOverHdConfirm.png\" format=\"PNG\" align=\"center\" ></imagedata> </" "imageobject>" msgstr "" #. type: Content of: <section><para> #: en/takeOverHdConfirm.xml:27 msgid "" "Click on <guibutton>Previous</guibutton> if you are not sure about your " "choice." msgstr "" "Feu clic a <guibutton>Anterior</guibutton> si no esteu segur sobre la tria." #. type: Content of: <section><para> #: en/takeOverHdConfirm.xml:30 msgid "" "Click on <guibutton>Next</guibutton> if you are sure and want to erase every " "partition, every operating system and all data on that hard disk." msgstr "" "Feu clic a <guibutton>Següent</guibutton> si esteu segur i voleu esborrar " "totes les particions, tots els sistemes operatius i totes les dades del disc." #. type: Content of: <section><info><title> #: en/testing.xml:9 msgid "Testing Mageia as Live system" msgstr "" #. type: Content of: <section><section><info><title> #: en/testing.xml:14 msgid "Live mode" msgstr "" #. type: Content of: <section><section><mediaobject> #: en/testing.xml:18 msgid "<imageobject> <imagedata fileref=\"live-liveMode.png\"/> </imageobject>" msgstr "" #. type: Content of: <section><section><para> #: en/testing.xml:23 msgid "" "You get this screen if you selected \"Boot Mageia\". If not, you get the " "\"<link linkend=\"doPartitionDisks\">Partitioning</link> step\"" msgstr "" "Us surt aquesta pantalla si heu seleccionat \"Arrenca Mageia\". Si no, us " "surt el pas de les <link linkend=\"doPartitionDisks\">particions</link>" #. type: Content of: <section><section><section><info><title> #: en/testing.xml:28 msgid "Testing hardware" msgstr "" #. type: Content of: <section><section><section><para> #: en/testing.xml:31 msgid "" "One of the Live mode goals is to test if the hardware is correctly managed " "by Mageia. You can check if all devices have a driver in the Hardware " "section of the Mageia Control Center. You can test the most current devices:" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:38 msgid "network interface: configure it with net_applet" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:42 msgid "graphical card: if you see the previous screen, it's already OK." msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:47 msgid "webcam:" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:51 msgid "sound: a jingle has already been played" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:55 msgid "printer: configure it and print a test page" msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:59 msgid "scanner: scan a document from ..." msgstr "" #. type: Content of: <section><section><section><para> #: en/testing.xml:63 msgid "" "If all is OK for you, you can process to the installation. If not, you can " "leave with the quit button." msgstr "" #. type: Content of: <section><section><section><remark> #: en/testing.xml:66 msgid "The configuration settings you made here are kept for the installation." msgstr "" #. type: Content of: <section><section><section><info><title> #: en/testing.xml:72 msgid "Launch installation" msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/testing.xml:76 msgid "" "<imageobject> <imagedata fileref=\"live-liveMode-install.png\"/> </" "imageobject>" msgstr "" #. type: Content of: <section><section><section><para> #: en/testing.xml:81 msgid "" "To launch the installation of Mageia LiveCD or Live DVD to the hard disc or " "SSD drive, simply click on the icon \"Install on Hard Disk\". You will get " "this screen, and then the \"<link linkend=\"doPartitionDisks\">Partitioning</" "link> step\" as for the direct installation." msgstr "" "Per llançar el CD o DVD autònom d'instal·lació de Mageia al disc dur o " "dispositiu SSD, només heu de clicar a la icona \"Instal·la al disc dur\". Us " "sortirà aquesta pantalla i després el pas de les <link linkend=" "\"doPartitionDisks\">particions</link> per a la instal·lació directa." #. type: Content of: <section><info><title> #: en/uninstall-Mageia.xml:3 msgid "Uninstalling Mageia" msgstr "Desinstal·lació de Mageia" #. type: Content of: <section><section><title> #: en/uninstall-Mageia.xml:10 msgid "Howto" msgstr "" #. type: Content of: <section><section><para> #: en/uninstall-Mageia.xml:12 msgid "" "If Mageia didn't convince you or you can't install it correctly, in short " "you want get rid of it. That is your right and Mageia also gives you the " "possibility to uninstall. This is not true for every operating system." msgstr "" #. type: Content of: <section><section><para> #: en/uninstall-Mageia.xml:17 msgid "" "After your data backup, reboot your installation Mageia DVD and select " "Rescue system, then, Restore Windows boot loader. At the next boot, you will " "only have Windows with no option to choose your operating system." msgstr "" #. type: Content of: <section><section><para> #: en/uninstall-Mageia.xml:22 msgid "" "To recover the space used by Mageia partitions on Windows, click on " "<code>Start -> Control Panel -> Administrative Tools -> Computer Management -" "> Storage -> Disk Management</code> to access to the partition management. " "You will recognize the Mageia partition because they are labeled " "<guilabel>Unknown</guilabel>, and also by their size and place in the disk. " "Right click on each of these partitions and select <guibutton>Delete</" "guibutton>. The space will be freed." msgstr "" #. type: Content of: <section><section><para> #: en/uninstall-Mageia.xml:30 msgid "" "If you are using Windows XP, you can create a new partition and format it " "(FAT32 or NTFS). It will get a partition letter." msgstr "" #. type: Content of: <section><section><para> #: en/uninstall-Mageia.xml:33 msgid "" "If you have Vista or 7, you have one more possibility, you can extend the " "existing partition that is at the left of the freed space. There are other " "partitioning tools that can be used, such as gparted, available for both " "windows and linux. As always, when changing partitions, be very careful, and " "make sure all important things have been backed up." msgstr "" #. type: Content of: <section><info><title> #: en/unused.xml:9 msgid "Keep or delete unused material" msgstr "" #. type: Content of: <section><mediaobject> #: en/unused.xml:13 msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format=" "\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>" msgstr "" #. type: Content of: <section><para> #: en/unused.xml:19 msgid "" "In this step, the installer looks for unused locales packages and unused " "hardware packages. Then it proposes you to delete them. It is a good idea to " "accept, except if you prepare an installation which has to run on different " "hardware." msgstr "" #. type: Content of: <section><mediaobject> #: en/unused.xml:25 msgid "" "<imageobject> <imagedata fileref=\"../live-unused-InstallationProgress.png\"/" "> </imageobject>" msgstr "" "<imageobject> <imagedata fileref=\"../live-unused-InstallationProgress.png\"/" "> </imageobject>" #. type: Content of: <section><para> #: en/unused.xml:30 msgid "" "The next step is the copying of files on hard disk. This takes some minutes. " "At the end, you get a blank screen for some time, it's normal." msgstr ""