Ndërto një ndërfaqe rrjeti (LAN, ISDN, ADSL, ...) drakconnect
Paraqitje This tool You can start this tool from the command line, by typing drakconnect as root. allows to configure much of local network or Internet access. You have to know some information from your access provider or your network administrator. Select the type of connection you want to set, according to which hardware and provider you have.
A new Wired connection (Ethernet) The first window lists the interfaces which are available. Select the one to configure. At this point, the choice is given between an automatic or a manual IP address. IP Automatike Ethernet/IP settings: you have to select if DNS servers are declared by the DHCP server or are manually specified, as explained below. In the last case, the IP address of DNS servers has to be set. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. The Hostname can also be provided by the DHCP server with the option Assign host name from DHCP server. Not all DHCP servers have such a function and if you're setting up your PC to get an IP address from a domestic ADSL router, it is unlikely. The advanced button give the opportunity to specify: Search domain (not accessible, as provided by the DHCP server) Klienti DHCP DHCP timeout Get YP server from DHCP (checked by default): specify the NIS server Get NTPD server from DHCP (synchronisation of clocks) the HOSTNAME required by DHCP. Only use this option if the DHCP server requires the client to specify a hostname before receiving an IP address. This option is not dealt by some DHCP servers. After accepting, the last steps which are common to all connection configurations are explained: Konfigurimi manual Ethernet/IP settings: you need to declare what DNS servers to use. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. For a residential network, the IP address usually looks like 192.168.x.x, Netmask is 255.255.255.0, and the Gateway and DNS servers are available from your service provider's website. In advanced settings, you can specified a Search domain. It would usually be your home domain, i.e. if your computer is called "splash", and it's full domain name is "splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless you specifically need it, it's ok not to define this setting. Again, domestic ADSL would not need this setting. The next steps are exposed at
Një lidhje e re Satelitore (DVB) This section hasn't been written yet for lack of resources. If you think you can write this help, please contact the Doc team. Thanking you in advance.
Një lidhje e re me Kabull modem The first window lists the interfaces which are available. Select the one to configure. At this point, the choice is given between an automatic or a manual IP address. You have to specify a authentication method: Asnjë BPALogin (necessary for Telstra). In this case you have to provide User name and password. IP Automatike Cable/IP settings: you have to select if DNS servers are declared by the DHCP server or are manually specified, as explained below. In the last case, the IP address of DNS servers has to be set. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. The Hostname can also be provided by the DHCP server with the option Assign host name from DHCP server. Not all DHCP servers have such a function and if you're setting up your PC to get an IP address from a domestic ADSL router, it is unlikely. The advanced button give the opportunity to specify: Search domain (not accessible, as provided by the DHCP server) Klienti DHCP DHCP timeout Get YP server from DHCP (checked by default): specify the NIS server Get NTPD server from DHCP (synchronisation of clocks) the HOSTNAME required by DHCP. Only use this option if the DHCP server requires the client to specify a hostname before receiving an IP address. This option is not dealt by some DHCP servers. After accepting, the last steps which are common to all connection configurations are explained: Konfigurimi manual Cable/IP settings: you need to declare what DNS servers to use. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. For a residential network, the IP address usually looks like 192.168.x.x, Netmask is 255.255.255.0, and the Gateway and DNS servers are available from your service provider's website. In advanced settings, you can specified a Search domain. It would usually be your home domain, i.e. if your computer is called "splash", and it's full domain name is "splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless you specifically need it, it's ok not to define this setting. Again, domestic connection would not need this setting. The next steps are exposed at
A new DSL connection If the tool detects network interfaces, it offers to select one and to configure it. A list of providers is proposed, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave. Select one of the protocols available: DHCP Konfigurimi manual TCP/IP PPP mbi ADSL (PPPoA) PPP mbi Ethernet (PPPoE) Protokolli tunel Pikë për Pikë (PPTP) Cilësime hyrëse Hyrje Llogarie (emri përdoruesit) Fjalëkalimi llogarisë (Avancuar) Shtegu Virtual ID (VPI) (Avancuar) Qarku Virtual ID (VCI) The next steps are exposed at
Lidhja e re ISDN Udhëzuesi pyet cilën pajisje të konfiguroj: Zgjedhje manuale (kartë e brendshme ISDN) Modemi i jashtëm ISDN Një listë e pjesëve-elektronike propozohet, klasifikuar sipas kategorisë dhe prodhues. Zgjidhni kartën tuaj. Select one of the protocols available: Protokolli për pjesën tjetër të botës, me përjashtim të Evropës (DHCP) Protokolli për Evropën (EDSS1) A list of providers is then offered, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave you. Then it is asked for parameters: Emri i lidhjes Numri i telefonit ID Hyrëse Fjalëkalimi llogarisë Metodë vërtetimi Pas kësaj, ju duhet të zgjidhni nëse ju merrni adresën IP nga metoda automatike apo manuale. Në rastin e fundit, specifikoni adresën IP dhe subnet mask. Hapi i ardhshëm është që të zgjidhni se si adresa DNS serverët janë të marra, me metodën automatike apo manuale. Në rastin e konfigurimit manual, ju duhet të vini: Emri pronës First and second DNS Server Select if the hostname is set from IP. This option is to select only if you are sure that your provider is configured to accept it. The next step is to choose how the gateway address is obtained, by automatic or manual method. In the case of manual configuration, you have to enter the IP address. The next steps are exposed at
A new Wireless connection (WiFi) A first window lists the interfaces which are available and an entry for Windows driver (ndiswrapper). Select the one to configure. Use ndiswrapper only if the other configuration methods did not work. At this step, the choice is given between the different access points that the card has detected. Specific parameter for the wireless card are to provide: Operating mode: Menaxhuar To access to an existing access point (the most frequent). Ad-Hoc Për të konfiguruar lidhje të drejtpërdrejtë ndërmjet kompjuterëve. Network Name (ESSID) Encryption mode: it depends of how the access point is configured. WPA/WPA2 This encryption mode is to prefer if your hardware allows it. WEP Some old hardware deals only this encryption method. Çelës enkriptues It is generally provided with the hardware which give the access point. At this step, the choice is given between an automatic IP address or a manual IP address. IP Automatike IP settings: you have to select if DNS servers are declared by the DHCP server or are manually specified, as explained below. In the last case, IP address of DNS servers has to be set. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. The Hostname can also be provided by the DHCP server with the option Assign host name from DHCP server The advanced button give the opportunity to specify: Search domain (not accessible, as provided by the DHCP server) Klienti DHCP DHCP timeout Get YP server from DHCP (checked by default): specify the NIS servers Get NTPD server from DHCP (synchronisation of clocks) the HOSTNAME required by DHCP. Only use this option if the DHCP server requires the client to specify a hostname before receiving an IP address. This option is not dealt by some DHCP servers. After accepting the configuration the step, which is common to all connection configurations, is explained: Konfigurimi manual IP settings: you have to declare DNS servers. The HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, the name localhost.localdomain is attributed by default. For a residential network, the IP address always looks like 192.168.x.x, Netmask is 255.255.255.0, and the Gateway and DNS servers are available from your providers website. In advanced settings, you can specified a Search domain. It must seem to your hostname without the first name, before the period. The next steps are exposed at
A new GPRS/Edge/3G connection If the tool detects wireless interfaces, it offers to select one and to configure it. The PIN is asked. Leave empty if the PIN is not required. The wizard asks for network. If it is not detected, select the option Unlisted. A list of providers is proposed, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave. Provide access settings Access Point Name Hyrje Llogarie (emri përdoruesit) Fjalëkalimi llogarisë The next steps are exposed at
A new Bluetooth Dial-Up Networking connection This section hasn't been written yet for lack of resources. If you think you can write this help, please contact the Doc team. Thanking you in advance.
A new Analog telephone modem connection (POTS) Udhëzuesi pyet cilën pajisje të konfiguroj: Zgjedhja manuale Detected hardware, if any. A list of ports is proposed. Select your port. If not yet installed, it will be suggested that you install the package kppp-provider. A list of providers is proposed, classified by countries. Select your provider. If it is not listed, select the option Unlisted and then enter the options your provider gave. Then it is asked for Dialup options: Emri lidhjes Numri telefonit ID Hyrëse Fjalëkalimi Vërtetimi, zgjedhin midis: PAP/CHAP Skript-bazë PAP Terminali-bazuar CHAP The next steps are exposed at
Përfundimi i konfigurimit Në hapin tjetër, ju mund të specifikoni: Lejo përdoruesit për të menaxhuar lidhjen Fillo lidhjen në ndezje Mundëso llogaritjen trafikut Lejo ndërfaqen të kontrollohet nga Menaxheri Rrjetit In the case of a wireless connection, a supplemental box is Allow access point roaming which give the possibility to switch automatically between access point according to the signal strength. With the advanced button, you can specify: Metrit (10 nga parazgjedhja) MTU Rrjet i Prizuar Mundëso tunelin IPv6 në IPv4 The last step allows you to specify if the connection is to start immediately or not.