# SOME DESCRIPTIVE TITLE
# Copyright (C) YEAR Mageia
# This file is distributed under the same license as the Mageia Installer Help package.
#
# Translators:
# Filip Komar <filip.komar@gmail.com>, 2013
# Filip Komar <filip.komar@gmail.com>, 2013,2016-2017
# Rok Kepa <rokkepa@gmail.com>, 2014
# Yuri Chornoivan <yurchor@ukr.net>, 2016
msgid ""
msgstr ""
"Project-Id-Version: Mageia\n"
"Report-Msgid-Bugs-To: doc-discuss@ml.mageia.org\n"
"POT-Creation-Date: 2017-06-25 20:39+0300\n"
"PO-Revision-Date: 2017-07-27 22:37+0000\n"
"Last-Translator: Filip Komar <filip.komar@gmail.com>\n"
"Language-Team: Slovenian (http://www.transifex.com/MageiaLinux/mageia/"
"language/sl/)\n"
"Language: sl\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=4; plural=(n%100==1 ? 0 : n%100==2 ? 1 : n%100==3 || n"
"%100==4 ? 2 : 3);\n"

#. type: Content of: <section><info><title>
#: en/acceptLicense.xml:25
msgid "License and Release Notes"
msgstr "Licenčna pogodba in opombe ob izdaji"

#. type: Content of: <section><mediaobject>
#: en/acceptLicense.xml:29
msgid ""
"<imageobject condition=\"classical\"> <imagedata xml:id=\"acceptLicense-"
"im1\" revision=\"4\" align=\"center\" format=\"PNG\" fileref=\"dx2-license."
"png\"/> </imageobject> <imageobject> <imagedata xml:id=\"acceptLicense-im2\" "
"revision=\"5\" align=\"center\" condition=\"live\" format=\"PNG\" fileref="
"\"live-license.png\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata xml:id=\"acceptLicense-"
"im1\" revision=\"4\" align=\"center\" format=\"PNG\" fileref=\"dx2-license."
"png\"/> </imageobject> <imageobject> <imagedata xml:id=\"acceptLicense-im2\" "
"revision=\"5\" align=\"center\" condition=\"live\" format=\"PNG\" fileref="
"\"live-license.png\"/> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/acceptLicense.xml:40
msgid "License Agreement"
msgstr "Licenčna pogodba"

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:43
msgid ""
"Before installing <application>Mageia</application>, please read the license "
"terms and conditions carefully."
msgstr ""
"Pred namestitvijo <application>Mageje</application> pozorno preberite "
"licenčne pogoje."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:46
msgid ""
"These terms and conditions apply to the entire <application>Mageia</"
"application> distribution and must be accepted before you can continue."
msgstr ""
"Ti licenčni pogoji se nanašajo na celotno distribucijo <application>Mageia</"
"application>. Pred nadaljevanjem jih je potrebno sprejeti."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:50
msgid ""
"To accept, simply select <guilabel>Accept</guilabel> and then click on "
"<guibutton>Next</guibutton>."
msgstr ""
"Za sprejem preprosto označite  <guilabel>Sprejmem</guilabel> in kliknite "
"gumb <guibutton>Naprej</guibutton>."

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:53
msgid ""
"If you decide not to accept these conditions, then we thank you for looking. "
"Clicking <guibutton>Quit</guibutton> will reboot your computer."
msgstr ""
"Zahvaljujemo se za vaš ogled tudi če se odločite, da teh pogojev ne boste "
"sprejeli. S klikom na gumb <guibutton>Izhod</guibutton> se bo vaš računalnik "
"ponovno zagnal."

#. type: Content of: <section><section><info><title>
#: en/acceptLicense.xml:63
msgid "Release Notes"
msgstr "Opombe ob izdaji"

#. type: Content of: <section><section><para>
#: en/acceptLicense.xml:70
msgid ""
"Important information are given about this release of <application>Mageia</"
"application> and are accessible clicking on the <guibutton>Release Notes</"
"guibutton> button."
msgstr ""
"Za to izdajo distribucije <application>Mageia</application> so na voljo "
"pomembne informacije, dosegljive s klikom na gumb <guibutton>Opombe ob "
"izdaji</guibutton>."

#. type: Attribute 'xml:lang' of: <section>
#: en/add_supplemental_media.xml:2 en/DrakLive-cover.xml:2 en/DrakLive.xml:1
#: en/DrakX-cover.xml:2 en/DrakX.xml:1 en/media_selection.xml:1
msgid "en"
msgstr "sl"

#. type: Content of: <section><info><title>
#: en/add_supplemental_media.xml:10
msgid "Media Selection (Configure Supplemental Installation Media)"
msgstr "Izbira virov (nastavitev dodatnih virov namestitve)"

#.  papoteur 2013-04-13  - created 
#.  marja 2013-04-16 added screenshot and expanded title (because is was the same as for media_selection 
#.  marja 2013-04-16 s/a optical/an optcal/ s/support/disc/ s/or or/or/ s/at/during/ as suggested by Tristan Campbell 
#. type: Content of: <section><mediaobject>
#: en/add_supplemental_media.xml:18
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-"
"add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-"
"add_supplemental_media-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-"
"add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-"
"add_supplemental_media-im1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/add_supplemental_media.xml:24
msgid ""
"This screen gives you the list of already recognized repositories. You can "
"add other sources for packages, like an optical disc or a remote source. The "
"source selection determines which packages will be available for selection "
"during the next steps."
msgstr ""
"Ta zaslon ponuja seznam že prepoznanih odlagališč paketov. Lahko dodate še "
"kak drug vir, recimo DVD ali kak oddaljen vir. Ta izbor bo določil kateri "
"paketi bodo na voljo v naslednjih korakih."

#. type: Content of: <section><para>
#: en/add_supplemental_media.xml:29
msgid "For a network source, there are two steps to follow:"
msgstr "Za omrežni vir je potrebno slediti dvema korakoma:"

#. type: Content of: <section><orderedlist><listitem><para>
#: en/add_supplemental_media.xml:33
msgid "Choosing and activation of the network, if not already up."
msgstr "Izbor in po potrebi aktiviranje omrežja."

#. type: Content of: <section><orderedlist><listitem><para>
#: en/add_supplemental_media.xml:37
msgid ""
"Selecting a mirror or specifying a URL (very first entry). By selecting a "
"mirror, you have access to the selection of all repositories managed by "
"Mageia, like the Nonfree , the Tainted repositories and the Updates. With "
"the URL, you can designate a specific repository or your own NFS "
"installation."
msgstr ""
"Izbor zrcala ali določanje URL-ja (čisto prvi vnos). Z izborom zrcala "
"pridobite dostop do vseh skladišč, ki jih upravlja skupnost Mageia, Npr. z "
"lastniško programsko opremo (Nonfree) ali Patentno zaščiteni (Tainted) in "
"seveda posodobitve. Z določanjem URL-ja lahko določite specifično skladišče "
"ali vašo lastno namestitev NFS."

#. type: Content of: <section><note><para>
#: en/add_supplemental_media.xml:46
msgid ""
"If you are updating a 64 bit installation which may contain some 32 bit "
"packages, it is advised to use this screen to add an online mirror by "
"ticking one of the Network protocols here. The 64 bit DVD iso only contains "
"64 bit and noarch packages, it will not be able to update the 32 bit "
"packages. However, after adding an online mirror, installer will find the "
"needed 32 bit packages there."
msgstr ""
"Za posodobitev 64-bitne namestitve, ki lahko vsebuje nekaj 32-bitnih paketov "
"je priporočljivo tukaj dodati aktivno zrcalo z označenjem enega od omrežnih "
"protokolov. To je potrebno, ker 64-bitna slika odtisa diska ne vsebuje 32-"
"bitnih paketov, zato jih brez aktivnega zrcala namestitev ne more posodobiti."

#. type: Content of: <section><info><title>
#: en/addUser.xml:3
msgid "User and Superuser Management"
msgstr "Upravljanje z naprednimi in navadnimi uporabniki"

#.  Lebarhon: 20170210 updated for Mageia 6 (umask)
#. type: Content of: <section><mediaobject>
#: en/addUser.xml:7
msgid ""
"<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref="
"\"dx2-setRootPassword.png\" align=\"center\" revision=\"1\" xml:id="
"\"setRootPassword-im1\"/> </imageobject> <imageobject> <imagedata format="
"\"PNG\" fileref=\"live-user1.png\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref="
"\"dx2-setRootPassword.png\" align=\"center\" revision=\"1\" xml:id="
"\"setRootPassword-im1\"/> </imageobject> <imageobject> <imagedata format="
"\"PNG\" fileref=\"live-user1.png\"/> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:16
msgid "Set Administrator (root)  Password:"
msgstr "Nastavite geslo skrbnika (uporabnika root):"

#. type: Content of: <section><section><para>
#: en/addUser.xml:19
msgid ""
"It is advisable for all <application>Mageia</application> installations to "
"set a superuser or administrator's password, usually called the "
"<emphasis>root password</emphasis> in Linux. As you type a password into the "
"top box the colour of its shield will change from red to yellow to green "
"depending on the strength of the password. A green shield shows you are "
"using a strong password. You need to repeat the same password in the box "
"just below the first password box, this checks that you have not mistyped "
"the first password by comparing them."
msgstr ""
"V vseh namestitvah <application>Mageje</application> je priporočljivo "
"nastaviti geslo skrbnika, v Linux-u znan kot <emphasis>geslo root "
"uporabnika</emphasis>. Med tipkanjem gesla v polje se bo barva ščita "
"spremenila glede na moč gesla od rdeče do rumene in pri močnem geslu zelene. "
"Zaradi preverjanja pravilnosti vnosa morate geslo ponoviti v polju niže."

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:28
msgid ""
"All passwords are case sensitive, it is best to use a mixture of letters "
"(upper and lower case), numbers and other characters in a password."
msgstr ""
"Vsa gesla so občutljiva na velikost črk. Najbolje je v njem uporabiti "
"mešanico velikih ter malih črk, številk in posebnih znakov."

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:35
msgid "Enter a user"
msgstr "Dodajte uporabnika"

#. type: Content of: <section><section><para>
#: en/addUser.xml:37
msgid ""
"Add a user here. A user has fewer rights than the superuser (root), but "
"enough to use the internet, office applications or play games and anything "
"else the average user does with his computer"
msgstr ""
"Tukaj dodajte uporabnika. Imel bo manj pravic kot skrbnik (root), a dovolj "
"za uporabo spleta, pisarniških programov, igranje iger in vse ostalo kar "
"običajni uporabnik počne z računalnikom."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:40
msgid ""
"<guibutton>Icon</guibutton>: if you click on this button it will change the "
"user's icon."
msgstr ""
"<guibutton>Ikona</guibutton>: s klikom na ta gumb je možno spremeniti ikono "
"oz. sliko uporabnika."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:43
msgid ""
"<guilabel>Real Name</guilabel>: Insert the user's real name into this text "
"box."
msgstr "<guilabel>Pravo ime</guilabel>: tukaj vnesite pravo ime uporabnika."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:46
msgid ""
"<guilabel>Login Name</guilabel>: Here you enter the user login name or let "
"drakx use a version of the user's real name. <emphasis>The login name is "
"case sensitive.</emphasis>"
msgstr ""
"<guilabel>Prijavno ime</guilabel>: Tukaj vnesete prijavno ime uporabnika ali "
"pustite programu drakx uporabiti verzijo pravega imena uporabnika. "
"<emphasis>Prijavno ime razlikuje med velikostjo črk.</emphasis>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:50
msgid ""
"<guilabel>Password</guilabel>: In this text box you should type in the user "
"password. There is a shield at the end of the text box that indicates the "
"strength of the password. (See also <xref linkend=\"givePassword\"/>)"
msgstr ""
"<guilabel>Geslo</guilabel>: Tukaj vnesite uporabniško geslo. Med tipkanjem "
"gesla v polje se bo barva ščita desno spremenila glede na moč gesla od rdeče "
"do rumene in pri močnem geslu zelene. (Glejte tudi <xref linkend="
"\"givePassword\"/>)"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:55
msgid ""
"<guilabel>Password (again)</guilabel>: Retype the user password into this "
"text box and drakx will check you have the same password in each of the user "
"password text boxes."
msgstr ""
"<guilabel>Geslo (ponovno)</guilabel>: Program drakx preverja pravilnost "
"vnosa, zato morate vnos gesla ponoviti."

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:61
msgid ""
"Any user you add while installing Mageia, will have a both read and write "
"protected home directory (umask=0027)."
msgstr ""
"Vsak uporabnik, dodan med namestitvijo Mageje, bo imel domačo mapo zaščiteno "
"tako pred branjem kot tudi pisanjem (umask=0027)"

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:63
msgid ""
"You can add all extra needed users in the <emphasis>Configuration - Summary</"
"emphasis> step during the install. Choose <emphasis>User management</"
"emphasis>."
msgstr ""
"Več uporabnikov je med namestitvijo možno dodati v koraku "
"<emphasis>Nastavitve - povzetek</emphasis>. Izberite <emphasis>Upravljanje "
"uporabnikov</emphasis>."

#. type: Content of: <section><section><note><para>
#: en/addUser.xml:66
msgid "The access permissions can also be changed after the install."
msgstr "Dovoljenje dostopa lahko spremenite tudi po namestitvi"

#. type: Content of: <section><section><info><title>
#: en/addUser.xml:72
msgid "Advanced User Management"
msgstr "Napredno upravljanje z uporabniki"

#. type: Content of: <section><section><para>
#: en/addUser.xml:74
msgid ""
"If the <guibutton>advanced</guibutton> button is clicked you are offered a "
"screen that allows you to edit the settings for the user you are adding."
msgstr ""
"S klikom na gumb <guibutton>Napredno</guibutton> lahko urejate nastavitev za "
"tega dodanega uporabnika."

#. type: Content of: <section><section><para>
#: en/addUser.xml:77
msgid "Additionally, you can disable or enable a guest account."
msgstr "Dodatno lahko onemogočite ali omogočite prijavo gosta."

#. type: Content of: <section><section><warning><para>
#: en/addUser.xml:80
msgid ""
"Anything a guest with a default <emphasis>rbash</emphasis> guest account "
"saves to his /home directory will be erased when he logs out.  The guest "
"should save his important files to a USB key."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:86
msgid ""
"<guilabel>Enable guest account</guilabel>: Here you can enable or disable a "
"guest account. The guest account allows a guest to log into and use the PC, "
"but he has more restricted access than normal users."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:92
msgid ""
"<guilabel>Shell</guilabel>: This drop down list allows you to change the "
"shell used by the user you are adding in the previous screen, options are "
"Bash, Dash and Sh"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:97
msgid ""
"<guilabel>User ID</guilabel>: Here you can set the user ID for the user you "
"are adding in the previous screen. This is a number.  Leave it blank unless "
"you know what you are doing."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/addUser.xml:102
msgid ""
"<guilabel>Group ID</guilabel>: This lets you set the group ID.  Also a "
"number, usually the same one as for the user. Leave it blank unless you know "
"what you are doing."
msgstr ""

#. type: Content of: <section><info><title>
#: en/ask_mntpoint_s.xml:11
msgid "Choose the mount points"
msgstr "Izberite priklopne točke"

#.  Made by marja on 2012 03 28 
#.  NEEDS TO BE REVIEWED! 
#.  SimonNZG 2012-04-03 has taken a look but needs to come back 
#.  removed para xml:id's, marja, 20120409 
#.  barjac 14/04/2012 Minor edit to improve grammar and replaced "at least ONE"
#.        with "a", as I can't imagine having more than one root partition ;) 
#.  Lebarhon : I put [] where it seems having mistakes 
#.  Marja: you're right, in English English it is "its type", however, the Americans
#.        write "it's type". And you're right about the redundant part, too, I removed it
#.  And JohnR says the Americans are WRONG! :-)) 
#.  2012-04-19  Language proofreading done 
#. type: Content of: <section><mediaobject>
#: en/ask_mntpoint_s.xml:27
msgid ""
"<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-"
"chooseMountpoints.png\" align=\"center\" format=\"PNG\" xml:id="
"\"chooseMountPoints-im1\"></imagedata> </imageobject> <imageobject "
"condition='live'> <imagedata revision=\"1\" fileref=\"live-chooseMountpoints."
"png\" align=\"center\" format=\"PNG\" xml:id=\"live-chooseMountPoints-"
"im1\"></imagedata> </imageobject>"
msgstr ""
"<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-"
"chooseMountpoints.png\" align=\"center\" format=\"PNG\" xml:id="
"\"chooseMountPoints-im1\"></imagedata> </imageobject> <imageobject "
"condition='live'> <imagedata revision=\"1\" fileref=\"live-chooseMountpoints."
"png\" align=\"center\" format=\"PNG\" xml:id=\"live-chooseMountPoints-"
"im1\"></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/ask_mntpoint_s.xml:37
msgid ""
"Here you see the Linux partitions that have been found on your computer. If "
"you don't agree with the <application>DrakX</application> suggestions, you "
"can change the mount points."
msgstr ""

#. type: Content of: <section><note><para>
#: en/ask_mntpoint_s.xml:42
msgid ""
"If you change anything, make sure you still have a <literal>/</literal> "
"(root) partition."
msgstr ""
"Karkoli spremenite, pazite, da razdelek <literal>/</literal> (koren) ostane."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:48
msgid ""
"Every partition is shown as follows: \"Device\" (\"Capacity\", \"Mount point"
"\", \"Type\")."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:53
msgid ""
"\"Device\", is made up of: \"hard drive\", [\"hard drive number\"(letter)], "
"\"partition number\" (for example, \"sda5\")."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:59
msgid ""
"If you have many partitions, you can choose many different mount points from "
"the drop down menu, such as <literal>/</literal>, <literal>/home</literal> "
"and <literal>/var</literal>. You can even make your own mount points, for "
"instance <literal>/video</literal> for a partition where you want to store "
"your films, or <literal>/cauldron-home</literal> for the <literal>/home</"
"literal> partition of a cauldron install."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/ask_mntpoint_s.xml:69
msgid ""
"For partitions you don't need to have access to, you can leave the mount "
"point field blank."
msgstr ""

#. type: Content of: <section><warning><para>
#: en/ask_mntpoint_s.xml:75
msgid ""
"Choose <guibutton>Previous</guibutton> if you are not sure what to choose, "
"and then tick <guilabel>Custom disk partitioning</guilabel>. In the screen "
"that follows, you can click on a partition to see its type and size."
msgstr ""

#. type: Content of: <section><para>
#: en/ask_mntpoint_s.xml:81
msgid ""
"If you are sure the mount points are correct, click on <guibutton>Next</"
"guibutton>, and choose whether you only want to format the partition(s) "
"DrakX suggests, or more."
msgstr ""

#. type: Content of: <section><info><title>
#: en/bestTime.xml:10
msgid "Clock settings"
msgstr "Nastavitve ure"

#. type: Content of: <section><mediaobject>
#: en/bestTime.xml:14
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"live-bestTime.png\" "
"format=\"PNG\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"live-bestTime.png\" "
"format=\"PNG\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/bestTime.xml:20
msgid ""
"In this step, you have to select on which time your internal clock is set, "
"either local time or UTC time."
msgstr ""

#. type: Content of: <section><para>
#: en/bestTime.xml:23
msgid "In advanced tab, you will find more options about clock settings."
msgstr ""

#. type: Content of: <section><info><title>
#: en/bootLive.xml:1
msgid "Boot Mageia as Live system"
msgstr "Zaženi Magejo kot živ sistem"

#. type: Content of: <section><section><info><title>
#: en/bootLive.xml:1
msgid "Booting the medium"
msgstr "Zagon medija"

#. type: Content of: <section><section><section><info><title>
#: en/bootLive.xml:1
msgid "From a disc"
msgstr "Z diska"

#. type: Content of: <section><section><section><para>
#: en/bootLive.xml:1
msgid ""
"You can boot directly from the media you used to burn your image (CD-ROM, "
"DVD-ROM...). You usually just need to insert it in your CD/DVD drive for the "
"bootloader to launch the installation automatically after rebooting the "
"computer. If that does not happen you may need to reconfigure your BIOS or "
"press one key that will offer you to choose the peripheral from which the "
"computer will boot."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/bootLive.xml:6
msgid ""
"According to which hardware you have, and how it is configured, you get "
"either one or another of the two screens below."
msgstr ""

#. type: Content of: <section><section><section><info><title>
#: en/bootLive.xml:7
msgid "From a USB device"
msgstr "Z naprave USB"

#. type: Content of: <section><section><section><para>
#: en/bootLive.xml:7
msgid ""
"You can boot from the USB device on which you dumped your image ISO. "
"According to your BIOS settings, the computer boots perhaps directly on the "
"USB device already plugged in a port. If that does not happen you may need "
"to reconfigure your BIOS or press one key that will offer you to choose the "
"peripheral from which the computer will boot."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/bootLive.xml:12
msgid "In BIOS/CSM/Legacy mode"
msgstr "V načinu BIOS/CSM/Legacy"

#. type: Content of: <section><section><mediaobject>
#: en/bootLive.xml:12
msgid "<imageobject><imagedata fileref=\"../live-bootCSM.png\"/></imageobject>"
msgstr ""
"<imageobject><imagedata fileref=\"../live-bootCSM.png\"/></imageobject>"

#. type: Content of: <section><section><mediaobject><caption><para>
#: en/bootLive.xml:12
msgid "First screen while booting in BIOS mode"
msgstr "Prvi zaslon med zagonom v načinu BIOS"

#. type: Content of: <section><section><para>
#: en/bootLive.xml:12
msgid "In the middle menu, you have the choice between three actions:"
msgstr "V srednjem meniju so na voljo tri možna dejanja:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:13
msgid ""
"Boot Mageia: That means Mageia 5 will start from the connected media (CD/DVD "
"or USB stick) without writing anything on the disk, so expect a very slow "
"system. Once the boot is done, you can proceed to the installation on a hard "
"disk."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:16
msgid ""
"Install Mageia: This choice will directly install Mageia on a hard disk."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:17
msgid ""
"Boot from hard disk: This choice allows to boot from hard disk, as usual, "
"when no media (CD/DVD or USB stick) is connected. (not working with Mageia "
"5)."
msgstr ""

#. type: Content of: <section><section><para>
#: en/bootLive.xml:19
msgid "In the bottom menu, are the Boot Options:"
msgstr "V spodnjem meniju so na voljo zagonske možnosti:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:19
msgid ""
"F1 - Help. Explain the options \"splash\", \"apm\", \"acpi\" and \"Ide\""
msgstr "F1 - pomoč. Razlaga možnosti »splash«, »apm«, »acpi« in »Ide«"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:20
msgid "F2 - Language. Choose the display language of the screens."
msgstr "F2 - jezik. Izbor jezika za prikaz na zaslonu."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:21
msgid "F3 - Screen resolution. Choose between text, 640x400, 800x600, 1024x728"
msgstr ""
"F3 - ločljivost zaslona. Na voljo je izbor: tekst, 640x400, 800x600, 1024x728"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:22
msgid ""
"F4 - CD-Rom. CD-Rom or Other. Normally, the installation is performed from "
"the inserted installation medium. Here, select other sources, like FTP or "
"NFS servers. If the installation is carried out in a network with an SLP "
"server, select one of the installation sources available on the server with "
"this option."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:26
msgid ""
"F5 - Driver. Yes or No. The system is aware about the presence of an "
"optional disk with a driver update and will require its insertion during "
"installation process."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/bootLive.xml:28
msgid ""
"F6 - Kernel options. This is a way to specify options according to your "
"hardware and the drivers to use."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/bootLive.xml:29
msgid "In UEFI mode"
msgstr "V načinu UEFI"

#. type: Content of: <section><section><mediaobject>
#: en/bootLive.xml:29
msgid ""
"<imageobject><imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" "
"align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/></imageobject>"
msgstr ""
"<imageobject><imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" "
"align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/></imageobject>"

#. type: Content of: <section><section><mediaobject><caption><para>
#: en/bootLive.xml:29
msgid "First screen while booting on UEFI system from disk"
msgstr "Prvi zaslon med zagonom sistema z diska v načinu UEFI "

#. type: Content of: <section><section><para>
#: en/bootLive.xml:29
msgid ""
"You have only the choice to run Mageia in Live mode (first choice)  or to "
"process the installation (second choice)."
msgstr ""

#. type: Content of: <section><section><para>
#: en/bootLive.xml:30
msgid ""
"If you booted from a USB stick, you get two supplemental lines which are a "
"duplicata of the previous lines suffixed with \"USB\". You have to choose "
"them."
msgstr ""

#. type: Content of: <section><section><para>
#: en/bootLive.xml:32
msgid ""
"In each case, the first steps will be the same to choose language, timezone "
"and keyboard, then the processes differ, with <link linkend=\"testing"
"\">additional steps in Live mode</link>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/chooseDesktop.xml:3
msgid "Desktop Selection"
msgstr "Izbira namizja"

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:8
msgid ""
"Depending on your selection here, you may be offered further screens to fine "
"tune your choice."
msgstr ""

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:11
msgid ""
"After the selection step(s), you will see a slide show during package "
"installation. The slide show can be disabled by pressing the "
"<guilabel>Details</guilabel> button"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/chooseDesktop.xml:16
msgid ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-chooseDesktop.png\" "
"align=\"center\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-chooseDesktop.png\" "
"align=\"center\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/chooseDesktop.xml:21
msgid ""
"Choose whether you prefer to use the <application>KDE</application> or "
"<application>Gnome</application> desktop environment. Both come with a full "
"set of useful applications and tools. Tick <guilabel>Custom</guilabel> if "
"you want to use neither or both, or if you want something other than the "
"default software choices for these desktop environments. The "
"<application>LXDE</application> desktop is lighter than the previous two, "
"sporting less eye candy and fewer packages installed by default."
msgstr ""

#. type: Content of: <section><info><title>
#: en/choosePackageGroups.xml:3
msgid "Package Group Selection"
msgstr "Izbira skupin paketov"

#. Lebarhon 20170209 Updated SC
#. type: Content of: <section><mediaobject>
#: en/choosePackageGroups.xml:9
msgid ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-choosePackageGroups.png"
"\" align=\"center\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-choosePackageGroups.png"
"\" align=\"center\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/choosePackageGroups.xml:14
msgid ""
"Packages have been sorted into groups, to make choosing what you need on "
"your system a lot easier. The groups are fairly self explanatory, however "
"more information about the content of each is available in tool-tips which "
"become visible as the mouse is hovered over them."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:21
msgid "Workstation."
msgstr "Delovna postaja."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:25
msgid "Server."
msgstr "Strežnik."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:29
msgid "Graphical Environment."
msgstr "Grafično okolje."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/choosePackageGroups.xml:33
msgid ""
"Individual Package Selection: You can use this option to manually add or "
"remove packages."
msgstr ""

#. type: Content of: <section><para>
#: en/choosePackageGroups.xml:38
msgid ""
"Read <xref linkend=\"minimal-install\"/> for instructions on how to do a "
"minimal install (without or with X &amp; IceWM)."
msgstr ""

#. type: Content of: <section><info><title>
#: en/choosePackagesTree.xml:4
msgid "Choose Individual Packages"
msgstr "Izbira posamičnih paketov"

#. 2012-12-26 marja - exported this section from choosePackages.xml to start a new page
#. type: Content of: <section><mediaobject>
#: en/choosePackagesTree.xml:11
msgid ""
"<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" align="
"\"center\" format=\"PNG\" ></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" align="
"\"center\" format=\"PNG\" ></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/choosePackagesTree.xml:17
msgid ""
"Here you can add or remove any extra packages to customise your installation."
msgstr ""

#. type: Content of: <section><para>
#: en/choosePackagesTree.xml:20
msgid ""
"After having made your choice, you can click on the <guibutton>floppy icon</"
"guibutton> at the bottom of the page to save your choice of packages (saving "
"to a USB key works, too). You can then use this file to install the same "
"packages on another system, by pressing the same button during install and "
"choosing to load it."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureServices.xml:12
msgid "Configure your Services"
msgstr "Nastavite vaše storitve"

#.  2012-12-25 marja - moved this section out of misc-params.xml 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/configureServices.xml:21
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></"
"imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/configureServices.xml:27
msgid ""
"Here you can set which services should (not) start when you boot your system."
msgstr ""
"Tukaj lahko izberete, katere storitve naj se (ali ne) samodejno zaženejo ob "
"zagonu računalnika"

#. type: Content of: <section><para>
#: en/configureServices.xml:30
msgid ""
"There are four groups, click on the triangle before a group to expand it and "
"see all services in it."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:34
msgid "The setting DrakX chose are usually good."
msgstr "Izbor, ki ga naredi DrakX, je običajno primeren."

#. type: Content of: <section><para>
#: en/configureServices.xml:37
msgid ""
"If you highlight a service, some information about it is shown in the info "
"box below."
msgstr ""

#. type: Content of: <section><para>
#: en/configureServices.xml:41
msgid "Only change things when you know very well what you are doing."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureTimezoneUTC.xml:3
msgid "Configure your Timezone"
msgstr "Nastavite vaš časovni pas"

#.  2012-12-25 marja - moved this part out of misc-params.xml 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/configureTimezoneUTC.xml:11
msgid ""
"<imageobject condition=\"classical\"> <imagedata xml:id="
"\"configureTimezoneUTC-im1\" revision=\"1\" fileref=\"dx2-"
"configureTimezoneUTC.png\" align=\"center\" format=\"PNG\"/> </imageobject> "
"<imageobject> <imagedata fileref=\"live-timeZone.png\" condition=\"live\" "
"format=\"PNG\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata xml:id="
"\"configureTimezoneUTC-im1\" revision=\"1\" fileref=\"dx2-"
"configureTimezoneUTC.png\" align=\"center\" format=\"PNG\"/> </imageobject> "
"<imageobject> <imagedata fileref=\"live-timeZone.png\" condition=\"live\" "
"format=\"PNG\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/configureTimezoneUTC.xml:20
msgid ""
"Choose your time zone by choosing your country or a city close to you in the "
"same time zone."
msgstr ""

#. type: Content of: <section><para>
#: en/configureTimezoneUTC.xml:24
msgid ""
"In next screen you can choose to set your hardware clock to local time or to "
"GMT, also known as UTC."
msgstr ""

#. type: Content of: <section><note><para>
#: en/configureTimezoneUTC.xml:29
msgid ""
"If you have more than one operating system on your computer, make sure they "
"are all set to local time, or all to UTC/GMT."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureX_card_list.xml:11
msgid "Choose an X Server (Configure your Graphic Card)"
msgstr "Izberite strežnik X ()nastavite grafično kartico"

#. type: Content of: <section><mediaobject>
#: en/configureX_card_list.xml:16
msgid ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id="
"\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" format="
"\"PNG\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id="
"\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" format="
"\"PNG\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:21
msgid ""
"DrakX has a very comprehensive database of video cards and will usually "
"correctly identify your video device."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:24
msgid ""
"If the installer has not correctly detected your graphic card and you know "
"which one you have, you can select it from the tree by:"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:27 en/configureX_monitor.xml:69
msgid "vendor"
msgstr "Proizvajalec"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:31
msgid "then the name of your card"
msgstr "ime vaše kartice"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_card_list.xml:35
msgid "and the type of card"
msgstr "in tip kartice"

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:39
msgid ""
"If you cannot find your card in the vendor lists (because it's not yet in "
"the database or it's an older card) you may find a suitable driver in the "
"Xorg category"
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:43
msgid ""
"The Xorg listing provides more than 40 generic and open source video card "
"drivers. If you still can't find a named driver for your card there is the "
"option of using the vesa driver which provides basic capabilities."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:48
msgid ""
"Be aware that if you select an incompatible driver you may only have access "
"to the Commandline Interface."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:51
msgid ""
"Some video card manufacturers provide proprietary drivers for Linux which "
"may only be available in the Nonfree repository and in some cases only from "
"the card manufacturers' websites."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_card_list.xml:55
msgid ""
"The Nonfree repository needs to be explicitly enabled to access them.  If "
"you didn't select it previously, you should do this after your first reboot."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureX_chooser.xml:4
msgid "Graphic Card and Monitor Configuration"
msgstr "Nastavitev grafične kartice in monitorja"

#.  Marja 2012-08-10, copied setupX.xml to this file and replaced all "setupX" in the code by "configureX_chooser", because this is the correct filename for this page
#. type: Content of: <section><mediaobject>
#: en/configureX_chooser.xml:11
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureX_chooser.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureX_chooser-im1\"> </"
"imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureX_chooser.png"
"\" align=\"center\" format=\"PNG\" xml:id=\"configureX_chooser-im1\"> </"
"imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/configureX_chooser.xml:18
msgid ""
"No matter which graphical environment (also known as desktop environment) "
"you chose for this install of <application>Mageia</application>, they are "
"all based on a graphical user interface system called <acronym>X Window "
"System</acronym>, or simply <acronym>X</acronym>. So in order for "
"<acronym>KDE</acronym>, <acronym>Gnome</acronym>, <acronym>LXDE</acronym> or "
"any other graphical environment to work well, the following <acronym>X</"
"acronym> settings need to be correct. Choose the correct settings if you can "
"see that <application>DrakX</application> didn't make a choice, or if you "
"think the choice is incorrect."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:31
msgid ""
"<emphasis><guibutton>Graphic card</guibutton></emphasis>: Choose your card "
"from the list if needed."
msgstr ""
"<emphasis><guibutton>Grafična kartica</guibutton></emphasis>: Izberite jo iz "
"seznama, če je potrebno."

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:37
msgid ""
"<emphasis><guibutton>Monitor</guibutton></emphasis>: You can choose "
"<guilabel>Plug'n Play</guilabel> when applicable, or choose your monitor "
"from the <guilabel>Vendor</guilabel> or <guilabel>Generic</guilabel> list. "
"Choose <guilabel>Custom</guilabel> if you prefer to manually set the "
"horizontal and vertical refresh rates of your monitor."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><warning><para>
#: en/configureX_chooser.xml:45
msgid "Incorrect refresh rates may damage your monitor"
msgstr "Napačna frekvenca osveževanja lahko poškoduje vaš monitor"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:51
msgid ""
"<emphasis><guibutton>Resolution</guibutton></emphasis>: Set the desired "
"resolution and color depth of your monitor here."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:56
msgid ""
"<emphasis><guibutton>Test</guibutton></emphasis>: The test button does not "
"always appear during install. If the button is there, you can control your "
"settings by pressing it. If you see a question asking you whether your "
"settings are correct, you can answer \"yes\", and the settings will be kept. "
"If you don't see anything, you'll return to the configuration screen and be "
"able to reconfigure everything until the test is good. <emphasis>Make sure "
"your settings are on the safe side if the test button isn't available</"
"emphasis>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/configureX_chooser.xml:67
msgid ""
"<emphasis><guibutton>Options</guibutton></emphasis>: Here you can choose to "
"enable or disable various options."
msgstr ""

#. type: Content of: <section><info><title>
#: en/configureX_monitor.xml:18
msgid "Choosing your Monitor"
msgstr "Izberite vaš zaslon"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:21
msgid ""
"DrakX has a very comprehensive database of monitors and will usually "
"correctly identify yours."
msgstr ""

#. type: Content of: <section><warning><para>
#: en/configureX_monitor.xml:26
msgid ""
"<emphasis>Selecting a monitor with different characteristics could damage "
"your monitor or video hardware. Please don't try something without knowing "
"what you are doing.</emphasis> If in doubt you should consult your monitor "
"documentation"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/configureX_monitor.xml:34
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor."
"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor."
"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:42
msgid "<emphasis>Custom</emphasis>"
msgstr "<emphasis>Po meri</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:44
msgid ""
"This option allows you to set two critical parameters, the vertical refresh "
"rate and the horizontal sync rate. Vertical refresh determines how often the "
"screen is refreshed and horizontal sync is the rate at which scan lines are "
"displayed."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:49
msgid ""
"It is <emphasis>VERY IMPORTANT</emphasis> that you do not specify a monitor "
"type with a sync range that is beyond the capabilities of your monitor: you "
"may damage your monitor. If in doubt, choose a conservative setting and "
"consult your monitor documentation."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:55
msgid "<emphasis>Plug 'n Play</emphasis>"
msgstr "<emphasis>Vstavi in poženi</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:58
msgid ""
"This is the default option and tries to determine the monitor type from the "
"monitor database."
msgstr ""

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:63
msgid "<emphasis>Vendor</emphasis>"
msgstr "<emphasis>prodajalec</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:65
msgid ""
"If the installer has not correctly detected your monitor and you know which "
"one you have, you can select it from the tree by selecting:"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_monitor.xml:73
msgid "the monitor manufacturers name"
msgstr "ime proizvajalca zaslona"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/configureX_monitor.xml:77
msgid "the monitor description"
msgstr "opis zaslona"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:82
msgid "<emphasis>Generic</emphasis>"
msgstr "<emphasis>Običajen</emphasis>"

#. type: Content of: <section><para>
#: en/configureX_monitor.xml:84
msgid ""
"selecting this group displays nearly 30 display configurations such as "
"1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is "
"often a good monitor selection group if you need to use the Vesa card driver "
"when your video hardware cannot be determined automatically. Once again it "
"may be wise to be conservative in your selections."
msgstr ""

#. type: Content of: <section><info><title>
#: en/diskdrake.xml:6
msgid "Custom disk partitioning with DiskDrake"
msgstr "Razdeljevanje diska po meri s programom DiskDrake"

#. type: Content of: <section><mediaobject>
#: en/diskdrake.xml:10
msgid ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake.png"
"\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> "
"<imagedata fileref=\"live-diskdrake.png\" align=\"center\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake.png"
"\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> "
"<imagedata fileref=\"live-diskdrake.png\" align=\"center\"/> </imageobject>"

#. type: Content of: <section><warning><para>
#: en/diskdrake.xml:18
msgid ""
"If you wish to use encryption on your <literal>/</literal> partition you "
"must ensure that you have a separate <literal>/boot</literal> partition. The "
"encryption option for the <literal>/boot</literal> partition must NOT be "
"set, otherwise your system will be unbootable."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:24
msgid ""
"Adjust the layout of your disk(s)  here. You can remove or create "
"partitions, change the filesystem of a partition or change its size and even "
"view what is in them before you start."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:28
msgid ""
"There is a tab for every detected hard disk or other storage device, like an "
"USB key. For example sda, sdb and sdc if there are three of them."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:31
msgid ""
"Push <guibutton>Clear all</guibutton> to wipe all partitions on the selected "
"storage device"
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:33
msgid ""
"For all other actions: click on the desired partition first. Then view it, "
"or choose a filesystem and a mount point, resize it or wipe it. "
"<guibutton>Toggle to expert mode</guibutton> (or <guibutton>Expert mode</"
"guibutton>) gives some more tools like to add a label or to choose a "
"partition type."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:38
msgid "Continue until you adjusted everything to your wishes."
msgstr ""

#. type: Content of: <section><para>
#: en/diskdrake.xml:40
msgid "Click <guibutton>Done</guibutton> when you're ready."
msgstr "Klikni <guibutton>Končano</guibutton> ko bo v redu."

#. type: Content of: <section><note><para>
#: en/diskdrake.xml:43
msgid ""
"If you are installing Mageia on an UEFI system, check that an ESP (EFI "
"System Partition) is present and correctly mounted on /boot/EFI (see below)"
msgstr ""

#. type: Content of: <section><note><para><mediaobject>
#: en/diskdrake.xml:46
msgid ""
"<imageobject condition=\"classical\"><imagedata fileref=\"dx2-diskdrake2.png"
"\" align=\"center\"/></imageobject><imageobject condition=\"live"
"\"><imagedata align=\"center\" fileref=\"live-diskdrake2.png\"/></"
"imageobject>"
msgstr ""
"<imageobject condition=\"classical\"><imagedata fileref=\"dx2-diskdrake2.png"
"\" align=\"center\"/></imageobject><imageobject condition=\"live"
"\"><imagedata align=\"center\" fileref=\"live-diskdrake2.png\"/></"
"imageobject>"

#. type: Content of: <section><note><para>
#: en/diskdrake.xml:46
msgid "<placeholder type=\"mediaobject\" id=\"0\"/>"
msgstr "<placeholder type=\"mediaobject\" id=\"0\"/>"

#. type: Content of: <section><note><para>
#: en/diskdrake.xml:49
msgid ""
"If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot "
"partition is present and of the correct type"
msgstr ""

#. type: Content of: <section><note><mediaobject>
#: en/diskdrake.xml:51
msgid ""
"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
"\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
"\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks3.png\"/> </"
"imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
"\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
"\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks3.png\"/> </"
"imageobject>"

#. type: Content of: <section><info><title>
#: en/doPartitionDisks.xml:7
msgid "Partitioning"
msgstr "Razdelitev diska"

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:9
msgid ""
"In this screen you can see the content of your hard drive(s) and see the "
"solutions the DrakX partitioning wizard found for where to install "
"<application>Mageia</application>."
msgstr ""

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:13
msgid ""
"The options available from the list below will vary depending on your "
"particular hard drive(s) layout and content."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/doPartitionDisks.xml:17
msgid ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" align="
"\"center\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" align="
"\"center\"/> </imageobject>"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:24
msgid "Use Existing Partitions"
msgstr "Uporabi obstoječe razdelke"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:25
msgid ""
"If this option is available, then existing Linux compatible partitions have "
"been found and may be used for the installation."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:27
msgid "Use Free Space"
msgstr "Uporabi razpoložljivi prostor"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:27
msgid ""
"If you have unused space on your hard drive then this option will use it for "
"your new Mageia installation."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:29
msgid "Use Free Space on a Windows Partition"
msgstr "Uporabi razpoložljivi prostor v razdelku za Windows"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:30
msgid ""
"If you have unused space on an existing Windows partition, the installer may "
"offer to use it."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:32
msgid ""
"This can be a useful way of making room for your new Mageia installation, "
"but is a risky operation so you should make sure you have backed up all "
"important files!"
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:35
msgid ""
"Note that this involves shrinking the size of the Windows partition. The "
"partition must be \"clean\", meaning that Windows must have closed down "
"correctly the last time it was used. It must also have been defragmented, "
"although this is not a guarantee that all files in the partition have been "
"moved out of the area that is about to be used. It is highly recommended to "
"back up your personal files."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:41
msgid ""
"With this option, the installer displays the remaining Windows partition in "
"light blue and the future Mageia partition in dark blue with their intended "
"sizes just under. You have the possibility to adapt these sizes by clicking "
"and dragging the gap between both partitions. See the screen-shot below."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><mediaobject>
#: en/doPartitionDisks.xml:45
msgid ""
"<imageobject condition=\"classical\"><imagedata fileref=\"dx2-"
"doPartitionDisks2.png\" align=\"center\"/></imageobject><imageobject "
"condition=\"live\"><imagedata fileref=\"live-doPartitionDisks2.png\" align="
"\"center\"/></imageobject>"
msgstr ""
"<imageobject condition=\"classical\"><imagedata fileref=\"dx2-"
"doPartitionDisks2.png\" align=\"center\"/></imageobject><imageobject "
"condition=\"live\"><imagedata fileref=\"live-doPartitionDisks2.png\" align="
"\"center\"/></imageobject>"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:45
msgid "Erase and use Entire Disk."
msgstr "Zbriši in uporabi celoten disk."

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:46
msgid "This option will use the complete drive for Mageia."
msgstr "Ta možnost bo uporabila celoten pogon za Magejo."

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:47
msgid "Note! This will erase ALL data on the selected hard drive. Take care!"
msgstr "Pozor! To bo pobrisalo VSE podatke na izbrani napravi. Pazljivo!"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:48
msgid ""
"If you intend to use part of the disk for something else, or you already "
"have data on the drive that you are not prepared to lose, then do not use "
"this option."
msgstr ""

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:51
msgid "Custom disk partitioning"
msgstr "Razdeljevanje diska po meri"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:52
msgid ""
"This gives you complete control over the placing of the installation on your "
"hard drive(s)."
msgstr ""
"S tem imate popoln nadzor nad namestitvijo na (enem ali več) vaših diskov."

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:55
msgid "<emphasis role=\"bold\">Partition sizing:</emphasis>"
msgstr "<emphasis role=\"bold\">Spreminjanje velikosti razdelkov:</emphasis>"

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:56
msgid ""
"The installer will share the available place out according to the following "
"rules:"
msgstr "Namestitev bo razdelila razpoložljiv prostor po naslednjih pravilih:"

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:58
msgid ""
"If the total available place is lower than 50 GB, only one partition is "
"created for /, there is no separate partition for /home."
msgstr ""
"Če je vsega razpoložljivega prostora na voljo manj kot 50 GB, bo ustvarjen "
"samo en razdelek in sicer korenski: /. Brez ločenega domačega razdelka: /"
"home."

#. type: Content of: <section><para><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:60
msgid ""
"If the total available place is over 50 GB, then three partitions are created"
msgstr ""
"Če je vsega razpoložljivega prostora na voljo več kot 50 GB, bodo ustvarjeni "
"trije razdelki"

#. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:61
msgid ""
"6/19 of the total available place is allocated to / with a maximum of 50 GB"
msgstr "6/19 prostora na voljo bo namenjeno korenskemu: /, a ne več kot 50 GB"

#. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:62
msgid "1/19 is allocated to swap with a maximum of 4 GB"
msgstr "1/19 bo rezervirana izmenjalnemu razdelku: swap, a največ 4 GB"

#. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/doPartitionDisks.xml:62
msgid "the rest (at least 12/19) is allocated to /home"
msgstr "ostalih (vsaj 12/19) bo uporabljenih za domači razdelek: /home"

#. type: Content of: <section><para>
#: en/doPartitionDisks.xml:63
msgid ""
"That means that from 160 GB and over of available place, the installer will "
"create three partitions: 50 GB for /, 4 GB for swap and the rest for /home."
msgstr ""
"To pomeni, da bo namestitev pri 160 GB ali več razpoložljivega prostora "
"ustvarila tri razdelke: 50 GB za korenskega: /, 4 GB za izmenjalnega in "
"preostalo za domačo mapo: /home."

#. type: Content of: <section><note><para>
#: en/doPartitionDisks.xml:67
msgid ""
"If you are using an UEFI system, the ESP (EFI System Partition) will be "
"automatically detected, or created if it does not exist yet, and mounted on /"
"boot/EFI. The \"Custom disk partitioning\" option is the only one that "
"allows to check it has been correctly done"
msgstr ""

#. type: Content of: <section><note><para>
#: en/doPartitionDisks.xml:73
msgid ""
"If you are using a Legacy (as known as CSM or BIOS) system with a GPT disk, "
"you need to create a Bios boot partition if not already existing. It is an "
"about 1 MiB partition with no mount point. Choose <xref linkend=\"diskdrake"
"\"/> to be able to create it with the Installer like any other partition, "
"just select BIOS boot partition as filesystem type."
msgstr ""

#. type: Content of: <section><note><mediaobject>
#: en/doPartitionDisks.xml:79
msgid ""
"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
"\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
"\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
"\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
"\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </imageobject>"

#. type: Content of: <section><note><mediaobject>
#: en/doPartitionDisks.xml:87
msgid ""
"<imageobject> <imagedata fileref=\"dx2-doPartitionDisks4.png\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-doPartitionDisks4.png\"/> </"
"imageobject>"

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:93
msgid ""
"Some newer drives are now using 4096 byte logical sectors, instead of the "
"previous standard of 512 byte logical sectors. Due to lack of available "
"hardware, the partitioning tool used in the installer has not been tested "
"with such a drive. Also some ssd drives now use an erase block size over 1 "
"MB. We suggest to pre-partition the drive, using an alternative partitioning "
"tool like gparted, if you own such a device, and to use the following "
"settings:"
msgstr ""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:100
msgid "\"Align to\" \"MiB\""
msgstr "»Poravnaj z ang.: Align to« »MiB«"

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:101
msgid "\"Free space preceding (MiB)\" \"2\""
msgstr "\"Prazen prostor spredaj (MiB)\" 2\""

#. type: Content of: <section><warning><para>
#: en/doPartitionDisks.xml:102
msgid ""
"Also make sure all partitions are created with an even number of megabytes."
msgstr ""

#. type: Content of: <article><info><title>
#: en/DrakLive-cover.xml:4 en/DrakLive-cover.xml:30 en/DrakLive.xml:3
msgid "Installation from LIVE medium"
msgstr "Namestitev z Medija Live"

#. type: Content of: <book><info>
#: en/DrakLive-cover.xml:5 en/DrakX-cover.xml:5
msgid "<publisher> <publishername>Mageia.org</publishername> </publisher>"
msgstr "<publisher> <publishername>Mageia.org</publishername> </publisher>"

#. type: Content of: <book><info><revhistory><revision><date>
#: en/DrakLive-cover.xml:10
msgid "January 2015"
msgstr "januar 2015"

#. type: Content of: <book><info><revhistory><revision><revremark>
#: en/DrakLive-cover.xml:11
msgid "Mageia 5"
msgstr "Mageia 5"

#. type: Content of: <book><info><cover><para>
#: en/DrakLive-cover.xml:15 en/DrakX-cover.xml:15
msgid "The Official Documentation for Mageia"
msgstr "Uradna dokumentacija za Magejo"

#. type: Content of: <book><info><cover><mediaobject>
#: en/DrakLive-cover.xml:17 en/DrakX-cover.xml:17
msgid "<imageobject> <imagedata fileref=\"mageia-2013.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"../mageia-2013.png\"/> </imageobject>"

#. type: Content of: <article><info><cover><para>
#: en/DrakLive-cover.xml:21 en/DrakLive.xml:12 en/DrakX-cover.xml:21
#: en/DrakX.xml:12
msgid ""
"The texts and screenshots in this manual are available under the CC BY-SA "
"3.0 license <link ns6:href=\"http://creativecommons.org/licenses/by-sa/3.0/"
"\">http://creativecommons.org/licenses/by-sa/3.0/</link>."
msgstr ""
"Besedilo in zaslonski posnetki so licencirani z CC BY-SA 3.0 <link ns6:href="
"\"http://creativecommons.org/licenses/by-sa/3.0/\">http://creativecommons."
"org/licenses/by-sa/3.0/</link>."

#. type: Content of: <article><info><cover><para>
#: en/DrakLive-cover.xml:24 en/DrakLive.xml:15 en/DrakX-cover.xml:24
#: en/DrakX.xml:15
msgid ""
"This manual was produced with the help of the <link ns6:href=\"http://www."
"calenco.com\">Calenco CMS</link> developed by <link ns6:href=\"http://www."
"neodoc.biz\">NeoDoc</link>."
msgstr ""
"Ta navodila so bila ustvarjena s pomočjo orodja <link ns6:href=\"http://www."
"calenco.com\">Calenco CMS</link>, ki ga je razvila firma <link ns6:href="
"\"http://www.neodoc.biz\">NeoDoc</link>."

#. type: Content of: <article><info><cover><para>
#: en/DrakLive-cover.xml:26 en/DrakLive.xml:17 en/DrakX-cover.xml:26
#: en/DrakX.xml:17
msgid ""
"It was written by volunteers in their free time. Please contact <link ns6:"
"href=\"https://wiki.mageia.org/en/Documentation_team\">Documentation Team</"
"link>, if you would like to help improve this manual."
msgstr ""
"Napisali smo jih prostovoljci v svojem prostem času. Obrnite se na <link ns6:"
"href=\"https://wiki.mageia.org/en/Documentation_team\">ekipo za "
"dokumentiranje</link>, če jih želite izboljšati."

#. type: Content of: <article><info><cover><para><note>
#: en/DrakLive-cover.xml:31 en/DrakLive.xml:6 en/DrakX-cover.xml:37
#: en/DrakX.xml:6
msgid "<note>"
msgstr "<note>"

#. type: Content of: <article><info><cover><para><note><para>
#: en/DrakLive-cover.xml:32 en/DrakLive.xml:7 en/DrakX-cover.xml:38
#: en/DrakX.xml:7
msgid ""
"No one will see all the installer screens that you see in this manual. Which "
"screens you will see, depends on your hardware and the choices you make "
"while installing."
msgstr ""
"Vseh prikazanih zaslonskih posnetkov ni možno videti v vsaki namestitvi. "
"Njihov prikaz je odvisen od strojne opreme in vaše izbire med namestitvijo."

#. type: Content of: <article><info><cover><para>
#: en/DrakLive-cover.xml:35 en/DrakLive.xml:10 en/DrakX-cover.xml:41
#: en/DrakX.xml:10
msgid "</note>"
msgstr "</note>"

#. type: Content of: <article><info><title>
#: en/DrakX-cover.xml:4 en/DrakX-cover.xml:36 en/DrakX.xml:3
msgid "Installation with DrakX"
msgstr "Namestitev s programom DrakX"

#. type: Content of: <book><info><revhistory><revision><date>
#: en/DrakX-cover.xml:10
msgid "February 2014"
msgstr "Februar 2014"

#. type: Content of: <book><info><revhistory><revision><revremark>
#: en/DrakX-cover.xml:11
msgid "Mageia 4"
msgstr "Mageia 4"

#. type: Content of: <section><info><title>
#: en/exitInstall.xml:3
msgid "Congratulations"
msgstr "Čestitke"

#.  Lebarhon 20170209 updated SC
#. type: Content of: <section><mediaobject>
#: en/exitInstall.xml:7
msgid ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-exitInstall.png\" "
"align=\"center\" revision=\"1\" xml:id=\"exitInstall-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-exitInstall.png\" "
"align=\"center\" revision=\"1\" xml:id=\"exitInstall-im1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/exitInstall.xml:11
msgid ""
"You have finished installing and configuring <application>Mageia</"
"application> and it is now safe to remove the installation medium and reboot "
"your computer."
msgstr ""

#. type: Content of: <section><para>
#: en/exitInstall.xml:14
msgid ""
"After reboot, in the bootloader screen, you can choose between the operating "
"systems on your computer (if you have more than one)."
msgstr ""

#. type: Content of: <section><para>
#: en/exitInstall.xml:17
msgid ""
"If you didn't adjust the settings for the bootloader, your Mageia install "
"will be automatically selected and started."
msgstr ""

#. type: Content of: <section><para>
#: en/exitInstall.xml:20
msgid "Enjoy!"
msgstr "Uživajte"

#. type: Content of: <section><para>
#: en/exitInstall.xml:21
msgid ""
"Visit www.mageia.org if you have any questions or want to contribute to "
"Mageia"
msgstr ""

#. type: Content of: <section><info><title>
#: en/firewall.xml:3
msgid "Firewall"
msgstr "Požarni zid"

#. type: Content of: <section><para>
#: en/firewall.xml:6
msgid ""
"This section allows to configure some simple firewall rules: they determine "
"which type of message from the Internet will be accepted by the target "
"system. This, in turn, allows the corresponding services on the system to be "
"accessible from the Internet."
msgstr ""

#. type: Content of: <section><para>
#: en/firewall.xml:12
msgid ""
"In the default setting, no button is checked - no service of the system is "
"accessibly from the network. The \"<emphasis>Everything (no firewall)</"
"emphasis>\" button has a particular role: it enables access to all services "
"of the machine - an option that does not make much sense in the context of "
"the installer since it would create a totally unprotected system.  Its "
"veritable use is in the context of the Mageia Control Center (which uses the "
"same GUI layout) for temporarily disabling the entire set of firewall rules "
"for testing and debugging purposes."
msgstr ""

#. type: Content of: <section><para>
#: en/firewall.xml:21
msgid ""
"All other checkbuttons are more or less self-explanatory. As an example, you "
"will check the \"CUPS server\" button if you want printers on your machine "
"to be accessible from the network."
msgstr ""

#. type: Content of: <section><para>
#: en/firewall.xml:25
msgid "<emphasis role=\"bold\">Advanced</emphasis>"
msgstr "<emphasis role=\"bold\">Napredno</emphasis>"

#. type: Content of: <section><para>
#: en/firewall.xml:27
msgid ""
"The set of checkbuttons only comprises the most common services. The "
"\"Advanced\" button allows to enable messages that correspond to a service "
"for which no checkbutton exists. The \"<emphasis>Advanced</emphasis>\" "
"button opens a window where you can enable a series of services by typing a "
"list of couples (blank separated)"
msgstr ""

#. type: Content of: <section><para>
#: en/firewall.xml:33
msgid "<emphasis>&lt;port-number>/&lt;protocol></emphasis>"
msgstr "<emphasis>&lt;številka-vrat>/&lt;protokol></emphasis>"

#. type: Content of: <section><simplelist><member>
#: en/firewall.xml:36
msgid ""
"- <emphasis>&lt;port-number></emphasis> is the value of the port assigned to "
"the service you want to enable (e.g. 873 for the RSYNC service) as defined "
"in <emphasis>RFC-433</emphasis>;"
msgstr ""

#. type: Content of: <section><simplelist><member>
#: en/firewall.xml:40
msgid ""
"- <emphasis>&lt;protocol></emphasis> is one of <emphasis>TCP</emphasis> or "
"<emphasis>UDP</emphasis> - the internet protocol that is used by the service."
msgstr ""

#. type: Content of: <section><para>
#: en/firewall.xml:45
msgid ""
"For instance, the entry for enabling access to the RSYNC service therefore "
"is <emphasis>873/tcp</emphasis>."
msgstr ""

#. type: Content of: <section><para>
#: en/firewall.xml:48
msgid ""
"In case a service is implemented to use both protocols, you specify 2 "
"couples for the same port."
msgstr ""

#. type: Content of: <section><info><title>
#: en/formatPartitions.xml:4
msgid "Formatting"
msgstr "Formatiranje"

#.  Made by marja on 2012 03 29 
#.  NEEDS TO BE REVIEWED! 
#.  marja 2012-04-24 added screenshot 
#.  marja 2012-04-24 added emphasis tags in formatPartitions-pa1 
#. type: Content of: <section><mediaobject>
#: en/formatPartitions.xml:18
msgid ""
"<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-"
"formatPartitions.png\" format=\"PNG\" align=\"center\" xml:id="
"\"formatPartitions-im1\"> </imagedata> </imageobject> <imageobject "
"condition='live'> <imagedata revision=\"1\" fileref=\"live-formatPartitions."
"png\" format=\"PNG\" align=\"center\" xml:id=\"live-formatPartitions-im1\"> "
"</imagedata> </imageobject>"
msgstr ""
"<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-"
"formatPartitions.png\" format=\"PNG\" align=\"center\" xml:id="
"\"formatPartitions-im1\"> </imagedata> </imageobject> <imageobject "
"condition='live'> <imagedata revision=\"1\" fileref=\"live-formatPartitions."
"png\" format=\"PNG\" align=\"center\" xml:id=\"live-formatPartitions-im1\"> "
"</imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/formatPartitions.xml:30
msgid ""
"Here you can choose which partition(s) you wish to format. Any data on "
"partitions <emphasis>not</emphasis> marked for formatting will be saved."
msgstr ""

#. type: Content of: <section><para>
#: en/formatPartitions.xml:34
msgid "Usually at least the partitions DrakX selected, need to be formatted"
msgstr ""

#. type: Content of: <section><para>
#: en/formatPartitions.xml:37
msgid ""
"Click on <guibutton>Advanced</guibutton> to choose partitions you want to "
"check for so called <emphasis>bad blocks</emphasis>"
msgstr ""

#. type: Content of: <section><tip><para>
#: en/formatPartitions.xml:42
msgid ""
"If you're not sure you have made the right choice, you can click on "
"<guibutton>Previous</guibutton>, again on <guibutton>Previous</guibutton> "
"and then on <guibutton>Custom</guibutton> to get back to the main screen.  "
"In that screen you can choose to view what is in your partitions."
msgstr ""

#. type: Content of: <section><para>
#: en/formatPartitions.xml:49
msgid ""
"When you are confident about the selection, click on <guibutton>Next</"
"guibutton> to continue."
msgstr ""
"Ko boste z izborom zadovoljni, kliknite <guibutton>Naprej</guibutton> za "
"nadaljevanje."

#. type: Content of: <section><info><title>
#: en/installer.xml:3
msgid "DrakX, the Mageia Installer"
msgstr "DrakX, namestitveni program Mageje"

#. type: Content of: <section><para>
#: en/installer.xml:7
msgid ""
"Whether you are new to GNU-Linux or an experienced user, the Mageia "
"Installer is designed to help make your installation or upgrade as easy as "
"possible."
msgstr ""

#. type: Content of: <section><para>
#: en/installer.xml:11
msgid ""
"The initial menu screen has various options, however the default one will "
"start the installer, which will normally be all that you will need."
msgstr ""

#. type: Content of: <section><section><title>
#: en/installer.xml:16
msgid "Installation Welcome Screen"
msgstr "Prikaz dobrodošlice namestitve"

#. type: Content of: <section><section><section><title>
#: en/installer.xml:19
msgid "Using a Mageia DVD"
msgstr "Uporaba Magejinega DVD-ja"

#. type: Content of: <section><section><section><para>
#: en/installer.xml:21
msgid ""
"Here are the default welcome screens when using a Mageia DVD, The first one "
"with an UEFI system and the second one with a Legacy system:"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/installer.xml:26
msgid "<imageobject> <imagedata fileref=\"dx-welcome2.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"dx-welcome2.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para>
#: en/installer.xml:31
msgid ""
"From this screen, you can access to options by pressing the \"e\" letter to "
"enter the \"edit mode\". To come back to this screen, press either the key "
"\"esc\" to quit without saving or press the key \"Ctrl\" or \"F10\" to quit "
"with saving."
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/installer.xml:37
msgid "<imageobject> <imagedata fileref=\"dx-welcome.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"dx-welcome.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para>
#: en/installer.xml:42
msgid "From this screen, it is possible to set some personal preferences:"
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:45
msgid ""
"The language (for the installation only, may be different that the chosen "
"language for the system) by pressing the key F2 (Legacy mode only)"
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
#: en/installer.xml:50
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:55
msgid "Use the arrow keys to select the language and press the key Enter."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:58
msgid ""
"Here is for example, the French welcome screen when using a Live DVD/CD. "
"Note that the Live DVD/CD menu does not propose: <guilabel>Rescue System</"
"guilabel>, <guilabel>Memory test</guilabel> and <guilabel>Hardware Detection "
"Tool</guilabel>."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
#: en/installer.xml:65
msgid "<imageobject> <imagedata fileref=\"dx-welcome4fr.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcome4fr.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:72
msgid "Change the screen resolution by pressing the F3 key (Legacy mode only)."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
#: en/installer.xml:76
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:83
msgid ""
"Add some kernel options by pressing the <emphasis role=\"bold\">F6</"
"emphasis> key for the legacy mode or the <emphasis role=\"bold\">e</"
"emphasis> key for the UEFI mode."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:85
msgid ""
"If the installation fails, then it may be necessary to try again using one "
"of the extra options. The menu called by F6 displays a new line called "
"<guilabel>Boot options</guilabel> and propose four entries:"
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:90 en/installer.xml:93
msgid "- Default, it doesn't alter anything in the default options."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:96
msgid ""
"- No ACPI (Advanced Configuration and Power Interface), power management "
"isn't taken into account."
msgstr ""
"- Brez ACPI (vmesnik za napredne nastavitve in upravljanje z energijo) "
"upravljanje z energijo ni upoštevano"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:99
msgid ""
"- No Local APIC (Local Advanced Programmable Interrupt Controller), it is "
"about CPU interruptions, select this option if you are asked for."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:103
msgid ""
"When you select one of these entries, it modifies the default options "
"displayed in the <guilabel>Boot Options</guilabel> line."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><note><para>
#: en/installer.xml:108
msgid ""
"In some Mageia releases, it may happen that the entries selected with the "
"key F6 does not appear in the <guilabel>Boot Options</guilabel> line, "
"however, they are really taken into account."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
#: en/installer.xml:115
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:122
msgid "Add more kernel options by pressing the key F1 (Legacy mode only)."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:125
msgid ""
"Pressing F1 opens a new window with more available options.  Select one with "
"the arrow keys and press Enter to have more details or press the Esc key to "
"go back to the welcome screen."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
#: en/installer.xml:131
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:136
msgid ""
"The detailed view about the option splash. Press Esc or select "
"<guilabel>Return to Boot Options</guilabel> to go back to the options list. "
"These options can by added by hand in the <guilabel>Boot options</guilabel> "
"line."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
#: en/installer.xml:142
msgid ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><note><para>
#: en/installer.xml:148
msgid "The help is translated in the chosen language with the F2 key."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/installer.xml:152
msgid ""
"For more information about kernel options on legacy and UEFI systems, see: "
"<link ns2:href=\"https://wiki.mageia.org/en/How_to_set_up_kernel_options"
"\">https://wiki.mageia.org/en/How_to_set_up_kernel_options</link>"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/installer.xml:159
msgid "Using a Wired Network"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/installer.xml:161
msgid ""
"Here is the default welcome screen when using a Wired Network-based "
"Installation CD (netinstall.iso or netinstall-nonfree.iso images):"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/installer.xml:165
msgid ""
"It does not allow to change the language, the available options are "
"described in the screen. For more information about using a Wired Network-"
"based Installation CD, see <link ns2:href=\"https://wiki.mageia.org/en/Boot."
"iso_install\">the Mageia Wiki</link>"
msgstr ""

#. type: Content of: <section><section><section><warning><para>
#: en/installer.xml:171
msgid "The keyboard layout is the American one."
msgstr "Postavitev tipkovnice je sedaj Ameriška"

#. type: Content of: <section><section><section><mediaobject>
#: en/installer.xml:175
msgid "<imageobject> <imagedata fileref=\"../dx-help.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"../dx-help.png\"/> </imageobject>"

#. type: Content of: <section><section><title>
#: en/installer.xml:183
msgid "The installation steps"
msgstr "Namestitveni koraki"

#. type: Content of: <section><section><para>
#: en/installer.xml:185
msgid ""
"The install process is divided into a number of steps, which can be followed "
"on the side panel of the screen."
msgstr ""

#. type: Content of: <section><section><para>
#: en/installer.xml:188
msgid ""
"Each step has one or more screens which may also have <guibutton>Advanced</"
"guibutton> buttons with extra, less commonly required, options."
msgstr ""

#. type: Content of: <section><section><para>
#: en/installer.xml:192
msgid ""
"Most screens have <guibutton>Help</guibutton> buttons which give further "
"explanations about the current step."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/installer.xml:196
msgid ""
"If somewhere during install you decide to stop the installation, it is "
"possible to reboot, but please think twice before you do this.  Once a "
"partition has been formatted or updates have started to be installed, your "
"computer is no longer in the same state and rebooting it could very well "
"leave you with an unusable system. If in spite of this you are very sure "
"rebooting is what you want, go to a text terminal by pressing the three keys "
"<guibutton>Alt Ctrl F2</guibutton> at the same time. After that, press "
"<guibutton>Alt Ctrl Delete</guibutton> simultaneously to reboot."
msgstr ""

#. type: Content of: <section><section><title>
#: en/installer.xml:209
msgid "Installation Problems and Possible Solutions"
msgstr "Težave z namestitvijo in možne rešitve"

#. type: Content of: <section><section><section><title>
#: en/installer.xml:212
msgid "No Graphical Interface"
msgstr "Brez grafičnega vmesnika"

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/installer.xml:216
msgid ""
"After the initial screen you did not reach the language selection screen. "
"This can happen with some graphic cards and older systems. Try using low "
"resolution by typing <code>vgalo</code> at the prompt."
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/installer.xml:223
msgid ""
"If the hardware is very old, a graphical installation may not be possible. "
"In this case it is worth trying a text mode installation. To use this hit "
"ESC at the first welcome screen and confirm with ENTER. You will be "
"presented with a black screen with the word \"boot:\". Type \"text\" and hit "
"ENTER. Now continue with the installation in text mode."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/installer.xml:234
msgid "The Install Freezes"
msgstr "Namestitev zamrzne"

#. type: Content of: <section><section><section><para>
#: en/installer.xml:236
msgid ""
"If the system appeared to freeze during the installation, this may be a "
"problem with hardware detection. In this case the automatic detection of "
"hardware may be bypassed and dealt with later. To try this, type "
"<code>noauto</code> at the prompt. This option may also be combined with "
"other options as necessary."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/installer.xml:244
msgid "RAM problem"
msgstr "Težave s spominom RAM"

#. type: Content of: <section><section><section><para>
#: en/installer.xml:246
msgid ""
"These will rarely be needed, but in some cases the hardware may report the "
"available RAM incorrectly. To specify this manually, you can use the "
"<code>mem=xxxM</code> parameter, where xxx is the correct amount of RAM. e."
"g. <code>mem=256M</code> would specify 256MB of RAM."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/installer.xml:253
msgid "Dynamic partitions"
msgstr "Dinamični razdelki"

#. type: Content of: <section><section><section><para>
#: en/installer.xml:255
msgid ""
"If you converted your hard disk from \"basic\" format to \"dynamic\" format "
"on Microsoft Windows, you must know that it is impossible to install Mageia "
"on this disc. To go back to a basic disk, see the Microsoft documentation: "
"<link ns2:href=\"http://msdn.microsoft.com/en-us/library/cc776315.aspx"
"\">http://msdn.microsoft.com/en-us/library/cc776315.aspx</link>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/installUpdates.xml:3
msgid "Updates"
msgstr "Posodobitve"

#.  Made by marja on 2012 03 30 
#.  NEEDS TO BE REVIEWED! 
#.  marja 20120418 removed xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg"" from section tag, trying to restore correct html filename
#.  marja, 2012-04-24 added screenshot 
#. type: Content of: <section><mediaobject>
#: en/installUpdates.xml:13
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></imagedata> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png\" "
"format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></imagedata> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/installUpdates.xml:19
msgid ""
"Since this version of <application>Mageia</application> was released, some "
"packages will have been updated or improved."
msgstr ""

#. type: Content of: <section><para>
#: en/installUpdates.xml:23
msgid ""
"Choose <guilabel>yes</guilabel> if you wish to download and install them, "
"select <guilabel>no</guilabel> if you don't want to do this now, or if you "
"aren't connected to the Internet"
msgstr ""

#. type: Content of: <section><para>
#: en/installUpdates.xml:28
msgid "Then press <guibutton>Next</guibutton> to continue"
msgstr "Kliknite <guibutton>Naprej</guibutton> za nadaljevanje"

#. type: Content of: <section><info><title>
#: en/login.xml:1
msgid "Login screen"
msgstr "Prijavni zaslon"

#. type: Content of: <section><mediaobject>
#: en/login.xml:1
msgid ""
"<imageobject><imagedata format=\"PNG\" xml:id=\"login-im1\" fileref=\"live-"
"login.png\" align=\"center\" revision=\"1\"/></imageobject>"
msgstr ""
"<imageobject><imagedata format=\"PNG\" xml:id=\"login-im1\" fileref=\"live-"
"login.png\" align=\"center\" revision=\"1\"/></imageobject>"

#. type: Content of: <section><mediaobject><caption><para>
#: en/login.xml:1
msgid "KDM login screen"
msgstr "KDM-jev prijavni zaslon"

#. type: Content of: <section><para>
#: en/login.xml:1
msgid "Finally, you will come to the login screen."
msgstr ""

#. type: Content of: <section><para>
#: en/login.xml:1
msgid ""
"Enter your user name and user password, and in a few seconds you will find "
"yourself with a loaded KDE or GNOME desktop, depending on which live medium "
"you used. You can now start using your Mageia installation."
msgstr ""

#. type: Content of: <section><para>
#: en/login.xml:3
msgid ""
"You can find another part of our documentation in <link linkend=\"https://"
"wiki.mageia.org/en/Category:Documentation\">the Mageia wiki</link>."
msgstr ""
"Najdete jih <link ns4:href=\"http://www.mageia.org/sl/downloads/\">tukaj</"
"link>."

#. type: Content of: <section><info><title>
#: en/media_selection.xml:3
msgid "Media Selection (Nonfree)"
msgstr "Izbira virov z lastniško programsko opremo (Nonfree)"

#.  papoteur 2013-04-11  - created 
#.  marja 2013-04-16 added screenshot + made title longer (because it was the same as for add_supplemental_media)
#.  marja 2013-04-16 s/in/during/ as suggested by Tristan Campbell 
#. marja 2013-04-17 s/xml:id="media-selection"/xml:id="media_selection"/ (html filename was wrong)
#. type: Content of: <section><mediaobject>
#: en/media_selection.xml:12
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png"
"\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png"
"\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/media_selection.xml:18
msgid ""
"Here you have the list of available repositories. Not all repositories are "
"available, according to which media you use for installing. The repositories "
"selection determines which packages will be available for selection during "
"the next steps."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:25
msgid ""
"The <emphasis>Core</emphasis> repository cannot be disabled as it contains "
"the base of the distribution."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:30
msgid ""
"The <emphasis>Nonfree</emphasis> repository includes packages that are free-"
"of-charge, i.e. Mageia may redistribute them, but they contain closed-source "
"software (hence the name - Nonfree). For example this repository includes "
"nVidia and ATI graphics card proprietary drivers, firmware for various WiFi "
"cards, etc."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/media_selection.xml:38
msgid ""
"The <emphasis>Tainted</emphasis> repository includes packages released under "
"a free license. The main criteria for placing packages in this repository is "
"that they may infringe patents and copyright laws in some countries, e.g. "
"Multimedia codecs needed to play various audio/video files; packages needed "
"to play commercial video DVD, etc."
msgstr ""

#. type: Content of: <section><info><title>
#: en/minimal-install.xml:12
msgid "Minimal Install"
msgstr "Minimalna namestitev"

#. type: Content of: <section><para>
#: en/minimal-install.xml:19
msgid ""
"You can choose a Minimal Installation by de-selecting everything in the "
"Package Group Selection screen, see <xref linkend=\"choosePackageGroups\"></"
"xref>."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:22
msgid ""
"If desired, you can additionally tick the \"Individual package selection\" "
"option in the same screen."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:24
msgid ""
"Minimal Installation is intended for those with specific uses in mind for "
"their <application>Mageia</application>, such as a server or a specialised "
"workstation. You will probably use this option combined with the "
"\"Individual package selection\" option mentioned above, to fine-tune your "
"installation, see <xref linkend=\"choosePackagesTree\"></xref>."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:29
msgid ""
"If you choose this installation class, then the related screen will offer "
"you a few useful extras to install, such as documentation and X."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:31
msgid ""
"If selected, \"With X\" will also include IceWM as lightweight desktop "
"environment."
msgstr ""

#. type: Content of: <section><para>
#: en/minimal-install.xml:33
msgid ""
"The basic documentation is provided in the form of man and info pages.  It "
"contains the man pages from the <link xlink:href=\"http://www.tldp.org/"
"manpages/man.html\">Linux Documentation Project</link> and the <link xlink:"
"href=\"http://www.gnu.org/software/coreutils/manual/\">GNU coreutils</link> "
"info pages."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/minimal-install.xml:41
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></imagedata> "
"</imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></imagedata> "
"</imageobject>"

#. type: Content of: <section><info><title>
#: en/misc-params.xml:3
msgid "Summary of miscellaneous parameters"
msgstr "Povzetek raznih nastavitev"

#.  Lebarhon 2016 12 16 updated for Mageia 6. 20170209 updated SC
#. type: Content of: <section><mediaobject>
#: en/misc-params.xml:10
msgid ""
"<imageobject> <imagedata fileref=\"dx2-summaryTop.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-summaryTop.png\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/misc-params.xml:15
msgid ""
"DrakX made smart choices for the configuration of your system depending on "
"the choices you made and on the hardware DrakX detected. You can check the "
"settings here and change them if you want after pressing "
"<guibutton>Configure</guibutton>."
msgstr ""

#. type: Content of: <section><note><para>
#: en/misc-params.xml:21
msgid ""
"As a general rule, default settings are recommended and you can keep them "
"with 3 exceptions:"
msgstr ""

#. type: Content of: <section><note><para><itemizedlist><listitem><para>
#: en/misc-params.xml:24
msgid "there are known issues with a default setting"
msgstr ""

#. type: Content of: <section><note><para><itemizedlist><listitem><para>
#: en/misc-params.xml:28
msgid "the default setting has already been tried and it fails"
msgstr ""

#. type: Content of: <section><note><para><itemizedlist><listitem><para>
#: en/misc-params.xml:32
msgid "something else is said in the detailed sections below"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:39
msgid "System parameters"
msgstr "Sistemske nastavitve"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:44
msgid "<guilabel>Timezone</guilabel>"
msgstr "<guilabel>Časovni pas</guilabel>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:46
msgid ""
"DrakX selected a time zone for you, depending on your preferred language. "
"You can change it if needed. See also <xref linkend=\"configureTimezoneUTC\"/"
">"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:52
msgid "<guilabel>Country / Region</guilabel>"
msgstr "<guilabel>Država</guilabel>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:55
msgid ""
"If you are not in the selected country, it is very important that you "
"correct the setting. See <xref linkend=\"selectCountry\"/>"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:61
msgid "<guilabel>Bootloader</guilabel>"
msgstr "<guilabel>Zagonski nalagalnik</guilabel>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:63
msgid "DrakX has made good choices for the bootloader setting."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:66
msgid "Do not change anything, unless you know how to configure Grub2"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:69
msgid "For more information, see <xref linkend=\"setupBootloader\"/>"
msgstr "Za več informacij poglejte <xref linkend=\"setupBootloader\"/>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:74
msgid "<guilabel>User management</guilabel>"
msgstr "<guilabel>Upravljanje z uporabniki</guilabel>"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:77
msgid ""
"You can add extra users here. They will each get their own <literal>/home</"
"literal> directories."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:83
msgid "<guilabel>Services</guilabel>:"
msgstr "<guilabel>Storitve</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:85
msgid ""
"System services refer to those small programs which run the background "
"(daemons). This tool allows you to enable or disable certain tasks."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:89
msgid ""
"You should check carefully before changing anything here - a mistake may "
"prevent your computer from operating correctly."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:93
msgid "For more information, see <xref linkend=\"configureServices\"/>"
msgstr "Za več informacij poglejte <xref linkend=\"configureServices\"/>"

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:100
msgid "Hardware parameters"
msgstr "Strojne nastavitve"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:105
msgid "<guilabel>Keyboard</guilabel>:"
msgstr "<guilabel>Tipkovnica</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:107
msgid ""
"This is where you setup or change your keyboard layout which will depend on "
"your location, language or type of keyboard."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><note><para>
#: en/misc-params.xml:112
msgid ""
"If you notice a wrong keyboard layout and want to change it, keep in mind "
"that your passwords are going to change too."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:118
msgid "<guilabel>Mouse</guilabel>:"
msgstr "<guilabel>Miška</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:120
msgid ""
"Here you can add or configure other pointing devices, tablets, trackballs "
"etc."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:125
msgid "<guilabel>Sound card</guilabel>:"
msgstr "<guilabel>Zvočna kartica</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:128
msgid ""
"The installer uses the default driver, if there is a default one. The option "
"to select a different driver is only given when there is more than one "
"driver for your card, but none of them is the default one."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:135
msgid "<guilabel>Graphical interface</guilabel>:"
msgstr "<guilabel>Grafični vmesnik</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:138
msgid "This section allows you to configure your graphic card(s) and displays."
msgstr ""
"V tem delu lahko nastavljate (eno ali več) grafičnih kartic in zaslonov."

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:141
msgid "For more information, see <xref linkend=\"configureX_chooser\"/>."
msgstr "Za več informacij poglejte <xref linkend=\"configureX_chooser\"/>."

#. type: Content of: <section><section><mediaobject>
#: en/misc-params.xml:147
msgid ""
"<imageobject> <imagedata format=\"PNG\" xml:id=\"summaryBottom-im1\" align="
"\"center\" fileref=\"dx2-summaryBottom.png\" revision=\"1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" xml:id=\"summaryBottom-im1\" align="
"\"center\" fileref=\"dx2-summaryBottom.png\" revision=\"1\"/> </imageobject>"

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:155
msgid "Network and Internet parameters"
msgstr "Nastavitve omrežja in interneta"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:161
msgid "<guilabel>Network</guilabel>:"
msgstr "<guilabel>Omrežje</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:163
msgid ""
"You can configure your network here, but for network cards with non-free "
"drivers it is better to do that after reboot, in the <application>Mageia "
"Control Center</application>, if you have not yet enabled the Nonfree media "
"repositories."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><warning><para>
#: en/misc-params.xml:170
msgid ""
"When you add a network card, do not forget to set your firewall to watch "
"that interface as well."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:177
msgid "<guilabel>Proxies</guilabel>:"
msgstr "<guilabel>Posredniški strežniki</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:179
msgid ""
"A Proxy Server acts as an intermediary between your computer and the wider "
"internet.  This section allows you to configure your computer to utilize a "
"proxy service."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:184
msgid ""
"You may need to consult your systems administrator to get the parameters you "
"need to enter here"
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/misc-params.xml:193
msgid "Security"
msgstr "Varnost"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:198
msgid "<guilabel>Security Level</guilabel>:"
msgstr "<guilabel>Stopnja varnosti</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:201
msgid ""
"Here you set the Security level for your computer, in most cases the default "
"setting (Standard) is adequate for general use."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:205
msgid "Check the option which best suits your usage."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:210
msgid "<guilabel>Firewall</guilabel>:"
msgstr "<guilabel>Požarni zid</guilabel>:"

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:212
msgid ""
"A firewall is intended to be a barrier between your important data and the "
"rascals out there on the internet who would compromise or steal it."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/misc-params.xml:216
msgid ""
"Select the services that you wish to have access to your system. Your "
"selections will depend on what you use your computer for. For more "
"information, see <xref linkend=\"firewall\"/>."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><warning><para>
#: en/misc-params.xml:222
msgid "Bear in mind that allowing everything (no firewall) may be very risky."
msgstr ""

#. type: Content of: <section><info><title>
#: en/reboot.xml:3
msgid "Reboot"
msgstr "Ponovni zagon"

#. type: Content of: <section><para>
#: en/reboot.xml:6
msgid ""
"Once the bootloader has been installed, you will be prompted to halt your "
"computer, remove the live CD and restart the computer, click on <emphasis "
"role=\"bold\"><guibutton>Finish</guibutton></emphasis> and act as "
"asked<emphasis role=\"bold\"> in this order!</emphasis>"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/reboot.xml:11
msgid "<imageobject> <imagedata fileref=\"live-reboot2.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"live-reboot2.png\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/reboot.xml:15
msgid ""
"When you restart, you will see a succession of download progress bars. These "
"indicate that the software media lists are being downloaded (see Software "
"management)."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/reboot.xml:17
msgid ""
"<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=\"live-"
"reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=\"live-"
"reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>"

#. type: Content of: <section><info><title>
#: en/resizeFATChoose.xml:16
msgid ""
"Resize <application>Windows<superscript>®</superscript></application> "
"partition"
msgstr ""
"Spremeni velikost <application>Windows<superscript>®</superscript></"
"application> razdelka"

#. type: Content of: <section><para>
#: en/resizeFATChoose.xml:20
msgid ""
"You have more than one <application>Windows<superscript>®</superscript></"
"application> partition.  Choose which one should be made smaller to make "
"space for installing <application>Mageia</application>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/securityLevel.xml:12
msgid "Security Level"
msgstr "Stopnja varnosti"

#.  2012-12-25 marja - moved this part out of misc-params.xml" 
#.  2013-05-05 marja - added screenshot 
#. type: Content of: <section><mediaobject>
#: en/securityLevel.xml:19
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" "
"align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/securityLevel.xml:24
msgid "You can adjust your security level here."
msgstr "Tukaj lahko prilagodite vašo varnostno stopnjo."

#. type: Content of: <section><para>
#: en/securityLevel.xml:27
msgid ""
"Leave the default settings as they are, if you don't know what to choose."
msgstr ""

#. type: Content of: <section><para>
#: en/securityLevel.xml:30
msgid ""
"After install, it will always be possible to adjust your security settings "
"in the <guilabel>Security</guilabel> part of the Mageia Control Center."
msgstr ""

#. type: Content of: <section><info><title>
#: en/SelectAndUseISOs2.xml:6
msgid "Select and use ISOs"
msgstr "Izbor in uporaba odtisa diska: ISO"

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:9
msgid "Introduction"
msgstr "Predstavitev"

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:10
msgid ""
"Mageia is distributed via ISO images. This page will help you to choose "
"which image match your needs."
msgstr ""

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:12
msgid "There is two families of media:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:15
msgid ""
"Classical installer: After booting the media, it will follow a process "
"allowing to choose what to install and how to configure your target system. "
"This give you the maximal flexibility for a customized installation, in "
"particular to choose which Desktop Environment you will install."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:22
msgid ""
"LIVE media: you can boot the media in a real Mageia system without "
"installing it, to see what you will get after installation.  The "
"installation process is simpler, but you get lesser choices."
msgstr ""

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:28
msgid "Details are given in the next sections."
msgstr "Podrobnosti so podane v naslednjih poglavjih."

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:31
msgid "Media"
msgstr "Vir"

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:33
msgid "Definition"
msgstr "Definicija"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:34
msgid ""
"Here, a medium (plural: media) is an ISO image file that allows you to "
"install and/or update Mageia and by extension any physical support the ISO "
"file is copied to."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:37
msgid ""
"You can find them <link ns4:href=\"http://www.mageia.org/en/downloads/"
"\">here</link>."
msgstr ""
"Najdete jih <link ns4:href=\"http://www.mageia.org/sl/downloads/\">tukaj</"
"link>."

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:40
msgid "Classical installation media"
msgstr "Mediji za klasično namestitev"

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:42 en/SelectAndUseISOs2.xml:73
#: en/SelectAndUseISOs2.xml:142
msgid "Common features"
msgstr "Skupne značilnosti"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:45
msgid "These ISOs use the traditional installer called drakx."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:49
msgid ""
"They are able to make a clean install or an update from previous releases."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:53 en/SelectAndUseISOs2.xml:84
#: en/SelectAndUseISOs2.xml:159
msgid "Different media for 32 or 64 bit architectures."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:56
msgid ""
"Some tools are available in the Welcome screen: Rescue System, Memory Test, "
"Hardware Detection Tool."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:60
msgid "Each DVD contains many available desktop environments and languages."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:64
msgid ""
"You'll be given the choice during the installation to add non free software."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:71
msgid "Live media"
msgstr "Živi medij"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:76
msgid ""
"Can be used to preview the distribution without installing it on a HDD, and "
"optionally install Mageia on to your HDD."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:80
msgid "Each ISO contains only one desktop environment (Plasma, GNOME or Xfce)."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:87
msgid ""
"<emphasis role=\"bold\">Live ISOs can only be used to create clean "
"installations, they cannot be used to upgrade from previous releases.</"
"emphasis>"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:92
msgid "They contain non free software."
msgstr "Vsebuje lastniško programsko opremo."

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:97
msgid "Live DVD Plasma"
msgstr "Živi Plasma DVD"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:100
msgid "Plasma desktop environment only."
msgstr "Samo namizno okolje Plasma."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:103 en/SelectAndUseISOs2.xml:117
#: en/SelectAndUseISOs2.xml:131
msgid "All languages are present."
msgstr "Prisotni so vsi jeziki."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:106
msgid "64 bit architecture only."
msgstr "Samo 64-bitna arhitektura."

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:111
msgid "Live DVD GNOME"
msgstr "Živi GNOME DVD"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:114
msgid "GNOME desktop environment only."
msgstr "Samo namizno okolje GNOME."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:120
msgid "64 bit architecture only"
msgstr "Samo 64-bitna arhitektura"

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:125
msgid "Live DVD Xfce"
msgstr "Živi Xfce DVD"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:128
msgid "Xfce desktop environment only."
msgstr "Samo namizno okolje Xfce."

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:134
msgid "32 or 64 bit architectures."
msgstr "32 in 64-bitni arhitekturi."

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:140
msgid "Boot-only CD media"
msgstr "Medij samo za zagon"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:145
msgid ""
"Each one is a small image that contains no more than that which is needed to "
"start the drakx installer and find drakx-installer-stage2 and other packages "
"that are needed to continue and complete the install. These packages may be "
"on the PC hard disk, on a local drive, on a local network or on the Internet."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:153
msgid ""
"These media are very light (less than 100 MB) and are convenient when "
"bandwidth is too low to download a full DVD, a PC without a DVD drive or a "
"PC that can't boot from a USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:162
msgid "English language only."
msgstr "samo angleščina."

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:167
msgid "netinstall.iso"
msgstr ""

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:170
msgid ""
"Contains only free software, for those people who prefer not to use non-free "
"software."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:175
msgid "netinstall-nonfree.iso"
msgstr "netinstall-nonfree.iso"

#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:178
msgid ""
"Contains non-free software (mostly drivers, codecs...) for people who need "
"it."
msgstr ""

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:186
msgid "Downloading and Checking Media"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:188
msgid "Downloading"
msgstr "Prejemanje"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:189
msgid ""
"Once you have chosen your ISO file, you can download it using either http or "
"BitTorrent. In both cases, a window gives you some information, such as the "
"mirror in use and an opportunity to change if the bandwidth is to low. If "
"http is chosen, you may also see something like"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:191
msgid "<imageobject> <imagedata fileref=\"Checking.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"Checking.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:195
msgid ""
"md5sum and sha1sum are tools to check the ISO integrity. Use only one of "
"them. Keep one of them <link linkend=\"integrity\">for further usage</link>. "
"Then a window similar to this one appears:"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:199
msgid "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:203
msgid "Check the radio button Save File."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:206
msgid "Checking the integrity of the downloaded media"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:207
msgid ""
"Both checksums are hexadecimal numbers calculated by an algorithm from the "
"file to be downloaded. When you ask these algorithms to recalculate this "
"number from your downloaded file, either you have the same number and your "
"downloaded file is correct, or the number is different and you have a "
"failure. A failure infers that you should retry the download or attempt a "
"repair using BitTorrent."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:213
msgid "Open a console, no need to be root, and:"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:214
msgid ""
"- To use md5sum, type: [sam@localhost]$ <userinput>md5sum path/to/the/image/"
"file.iso</userinput>."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:216
msgid ""
"- To use sha1sum, type: [sam@localhost]$ <userinput>sha1sum path/to/the/"
"image/file.iso</userinput>."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:218
msgid ""
"and compare the obtained number on your computer (you may have to wait for a "
"while) with the number given by Mageia. Example:"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/SelectAndUseISOs2.xml:221
msgid "<imageobject> <imagedata fileref=\"../Md5sum.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"../Md5sum.png\"/> </imageobject>"

#. type: Content of: <section><section><title>
#: en/SelectAndUseISOs2.xml:229
msgid "Burn or dump the ISO"
msgstr "Zapecite ali prenesite odtis diska"

#. type: Content of: <section><section><para>
#: en/SelectAndUseISOs2.xml:230
msgid ""
"The checked ISO can now be burned to a CD or DVD or dumped to a USB stick. "
"These operations are not a simple copy and aim to make a bootable medium."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:234
msgid "Burning the ISO to a CD/DVD"
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:235
msgid ""
"Use whatever burner you wish but ensure the burning device is set correctly "
"to <emphasis role=\"bold\">burn an image</emphasis>, burn data or files is "
"not correct. There is more information in <link ns4:href=\"https://wiki."
"mageia.org/en/Writing_CD_and_DVD_images\">the Mageia wiki</link>."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/SelectAndUseISOs2.xml:241
msgid "Dump the ISO to a USB stick"
msgstr "Odlaganje odtisa nosilca za namestitev na ključek USB"

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:242
msgid ""
"All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick "
"and then use it to boot and install the system."
msgstr ""

#. type: Content of: <section><section><section><warning><para>
#: en/SelectAndUseISOs2.xml:245
msgid ""
"\"Dumping\" an image onto a flash device destroys any previous file-system "
"on the device; any other data will be lost and the partition capacity will "
"be reduced to the image size."
msgstr ""
"Odlaganje odtisa nosilca za namestitev na ključek USB izbriše vse njegove "
"datotečne sisteme. Navidezna velikost naprave bo omejena na velikost odtisa. "
"Izgubili boste vse podatke na njem."

#. type: Content of: <section><section><section><para>
#: en/SelectAndUseISOs2.xml:249
msgid ""
"To recover the original capacity, you must redo partitioning and re-format "
"the USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:252
msgid "Using a graphical tool within Mageia"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:253
msgid ""
"You can use a graphical tool like <link ns4:href=\"https://wiki.mageia.org/"
"en/IsoDumper_Writing_ISO_images_on_USB_sticks\">IsoDumper</link>"
msgstr ""
"Uporabite lahko orodje z grafičnim vmesnikom kot je <link ns4:href=\"https://"
"wiki.mageia.org/en/IsoDumper_Writing_ISO_images_on_USB_sticks\">IsoDumper</"
"link>"

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:256
msgid "Using a graphical tool within Windows"
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:257
msgid "You could try:"
msgstr "Lahko poskusite:"

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:258
msgid ""
"- <link ns4:href=\"http://rufus.akeo.ie/?locale=en_US\">Rufus</link> using "
"the \"ISO image\" option;"
msgstr ""
"- <link ns4:href=\"http://rufus.akeo.ie/?locale=sl\">Rufus</link> z uporabo "
"možnosti \"ISO image\" \"ISO slika\" ;"

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:260
msgid ""
"- <link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 "
"Disk Imager</link>"
msgstr ""
"- <link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 "
"Disk Imager</link>"

#. type: Content of: <section><section><section><section><title>
#: en/SelectAndUseISOs2.xml:264
msgid "Using Command line within a GNU/Linux system"
msgstr ""

#. type: Content of: <section><section><section><section><warning><para>
#: en/SelectAndUseISOs2.xml:266
msgid ""
"It is potentially *dangerous* to do this by hand. You risk to overwrite a "
"disc partition if you get the device-ID wrong."
msgstr ""

#. type: Content of: <section><section><section><section><para>
#: en/SelectAndUseISOs2.xml:269
msgid "You can also use the dd tool in a console:"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:272
msgid "Open a console"
msgstr "Odprite konzolo"

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:275
msgid ""
"Become root with the command <userinput>su -</userinput> (don't forget the "
"final '-' )"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject>
#: en/SelectAndUseISOs2.xml:278
msgid "<imageobject> <imagedata fileref=\"../Root.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"../Root.png\"/> </imageobject>"

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:284
msgid ""
"Plug in your USB stick (do not mount it, this also means do not open any "
"application or file manager that could access or read it)"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:289
msgid "Enter the command <userinput>fdisk -l</userinput>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject>
#: en/SelectAndUseISOs2.xml:291
msgid "<imageobject> <imagedata fileref=\"../Fdisk.png\"/> </imageobject>"
msgstr "<imageobject> <imagedata fileref=\"../Fdisk.png\"/> </imageobject>"

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:295
msgid ""
"Alternatively, you can get the device name with the command <code>dmesg</"
"code>: at end, you see the device name starting with <emphasis>sd</"
"emphasis>, and <emphasis>sdd</emphasis> in this case:"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><screen>
#: en/SelectAndUseISOs2.xml:299
#, no-wrap
msgid ""
"[72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd\n"
"[72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000\n"
"[72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3\n"
"[72594.770536] usb 1-1: Product: Mass Storage Device\n"
"[72594.770537] usb 1-1: Manufacturer: JetFlash\n"
"[72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB\n"
"[72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes\n"
"[72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes\n"
"[72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected\n"
"[72594.772447] scsi host8: usb-storage 1-1:1.0\n"
"[72595.963238] scsi 8:0:0:0: Direct-Access     JetFlash Transcend 2GB    1100 PQ: 0 ANSI: 4\n"
"[72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)\n"
"[72595.964104] sd 8:0:0:0: [sdd] Write Protect is off\n"
"[72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00\n"
"[72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found\n"
"[72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through\n"
"[72595.967251]  <emphasis>sdd</emphasis>: sdd1\n"
"[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk"
msgstr ""
"[72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd\n"
"[72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000\n"
"[72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3\n"
"[72594.770536] usb 1-1: Product: Mass Storage Device\n"
"[72594.770537] usb 1-1: Manufacturer: JetFlash\n"
"[72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB\n"
"[72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes\n"
"[72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes\n"
"[72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected\n"
"[72594.772447] scsi host8: usb-storage 1-1:1.0\n"
"[72595.963238] scsi 8:0:0:0: Direct-Access     JetFlash Transcend 2GB    1100 PQ: 0 ANSI: 4\n"
"[72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)\n"
"[72595.964104] sd 8:0:0:0: [sdd] Write Protect is off\n"
"[72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00\n"
"[72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found\n"
"[72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through\n"
"[72595.967251]  <emphasis>sdd</emphasis>: sdd1\n"
"[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk"

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:319
msgid ""
"Find the device name for your USB stick (by its size), for example <code>/"
"dev/sdb</code> in the screenshot above, it is a 8GB USB stick."
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:324
msgid ""
"Enter the command: # <userinput>dd if=path/to/the/ISO/file of=/dev/sdX "
"bs=1M</userinput>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:326
msgid "Where X=your device name eg: /dev/sdc"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:327
msgid ""
"Example: # <userinput>dd if=/home/user/Downloads/Mageia-6-x86_64-DVD.iso of=/"
"dev/sdb bs=1M</userinput>"
msgstr ""

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:330
msgid "Enter the command: # <userinput>sync</userinput>"
msgstr "Vnesite ukaz: # <userinput>sync</userinput>"

#. type: Content of: <section><section><section><section><orderedlist><listitem><para>
#: en/SelectAndUseISOs2.xml:333
msgid "Unplug your USB stick, it is done"
msgstr "Odstranite ključek USB, ko bo zaključeno"

#. type: Content of: <section><info><title>
#: en/selectCountry.xml:3
msgid "Select your Country / Region"
msgstr "Izbor države/regije"

#.  Lebarhon 2016 12 16 updated for Mageia 6
#. type: Content of: <section><mediaobject>
#: en/selectCountry.xml:9
msgid ""
"<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" align="
"\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" align="
"\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/selectCountry.xml:14
msgid ""
"Select your country or region.  This is important for all kinds of settings, "
"like the currency and wireless regulatory domain. Setting the wrong country "
"can lead to not being able to use a Wireless network."
msgstr ""

#. type: Content of: <section><para>
#: en/selectCountry.xml:19
msgid ""
"If your country isn't in the list, click the <guilabel>Other Countries</"
"guilabel> button and choose your country / region there."
msgstr ""

#. type: Content of: <section><note><para>
#: en/selectCountry.xml:24
msgid ""
"If your country is only in the <guilabel>Other Countries</guilabel> list, "
"after clicking <guibutton>OK</guibutton> it may seem a country from the "
"first list was chosen. Please ignore this, DrakX will follow your real "
"choice."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/selectCountry.xml:32
msgid "Input method"
msgstr "Način vnosa"

#. type: Content of: <section><section><para>
#: en/selectCountry.xml:35
msgid ""
"In the <guilabel>Other Countries</guilabel> screen you can also select an "
"input method (at the bottom of the list). Input methods allow users to input "
"multilingual characters (Chinese, Japanese, Korean, etc). IBus is the "
"default input method, so users should not need to configure it manually. "
"Other input methods(SCIM, GCIN, HIME, etc) also provide similar functions "
"and can be installed if you added HTTP/FTP media before package selection."
msgstr ""

#. type: Content of: <section><section><note><para>
#: en/selectCountry.xml:44
msgid ""
"If you missed the input method setup during installation, you can access it "
"after you boot your installed system via \"Configure your Computer\" -> "
"\"System\", or by running localedrake as root."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectInstallClass.xml:21
msgid "Install or Upgrade"
msgstr "Namestitev ali nadgradnja"

#. type: Content of: <section><mediaobject>
#: en/selectInstallClass.xml:25
msgid ""
"<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" align="
"\"center\" format=\"PNG\"></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" align="
"\"center\" format=\"PNG\"></imagedata> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:32
msgid "Install"
msgstr "Namesti"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:34
msgid ""
"Use this option for a fresh <application>Mageia</application> installation."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:39
msgid "Upgrade"
msgstr "Nadgradnja"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectInstallClass.xml:41
msgid ""
"If you have one or more <application>Mageia</application> installations on "
"your system, the installer will allow you to upgrade one of them to the "
"latest release."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><warning><para>
#: en/selectInstallClass.xml:45
msgid ""
"Only upgrading from a previous Mageia version that was <emphasis>still "
"supported</emphasis> when this installer's version was released, has been "
"thoroughly tested. If you want to upgrade a Mageia version that had already "
"reached its End\tOf Life when this one was released, then it is better to do "
"a clean install while preserving your <literal>/home</literal> partition."
msgstr ""

#. type: Content of: <section><note><para>
#: en/selectInstallClass.xml:56
msgid ""
"If during install you decide to stop the installation, it is possible to "
"reboot, but please think twice before you do this. Once a partition has been "
"formatted or updates have started to be installed, your computer isn't in "
"the same state anymore and rebooting it could very well leave you with an "
"unusable system. If in spite of that you are very sure rebooting is what you "
"want, go to a text terminal by pressing the three keys <guilabel>Alt Ctrl "
"F2</guilabel> at the same time. After that, press <guilabel>Alt Ctrl Delete</"
"guilabel> simultaneously to reboot."
msgstr ""

#. type: Content of: <section><tip><para>
#: en/selectInstallClass.xml:67
msgid ""
"If you have discovered that you forgot to select an additional language, you "
"can return from the \"Install or Upgrade\" screen to the language choice "
"screen by pressing <guilabel>Alt Ctrl Home</guilabel>. Do <emphasis>not</"
"emphasis> do this later in the install."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectKeyboardLive.xml:3
msgid "Select keyboard"
msgstr "Izbor tipkovnice"

#. type: Content of: <section><mediaobject>
#: en/selectKeyboardLive.xml:7
msgid ""
"<imageobject> <imagedata xml:id=\"selectKeyboardLive-im1\" revision=\"1\" "
"align=\"center\" format=\"PNG\" fileref=\"live-selectKeyboard.png\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata xml:id=\"selectKeyboardLive-im1\" revision=\"1\" "
"align=\"center\" format=\"PNG\" fileref=\"live-selectKeyboard.png\"/> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/selectKeyboardLive.xml:12
msgid ""
"You will be required to set the keyboard layout you wish to use in Mageia​​. "
"The default one is selected according to your language and timezone "
"previously selected."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectKeyboard.xml:14
msgid "Keyboard"
msgstr "Tipkovnica"

#. type: Content of: <section><para>
#: en/selectKeyboard.xml:17
msgid ""
"DrakX selects an appropriate keyboard for your language. If no suitable "
"keyboard is found it will default to a US keyboard layout."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/selectKeyboard.xml:22
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png"
"\" /> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png"
"\" /> </imageobject>"

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:30
msgid ""
"Make sure that the selection is correct or choose another keyboard layout. "
"If you don't know which layout your keyboard has, look in the specifications "
"that came with your system, or ask the computer vendor. There may even be a "
"label on the keyboard that identifies the layout. You can also look here: "
"<link xlink:href=\"http://en.wikipedia.org/wiki/Keyboard_layout\">en."
"wikipedia.org/wiki/Keyboard_layout</link>"
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:40
msgid ""
"If your keyboard isn't in the list shown, click on <guibutton>More</"
"guibutton> to get a full list, and select your keyboard there."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para><warning><para>
#: en/selectKeyboard.xml:45
msgid ""
"After choosing a keyboard from the <guibutton>More</guibutton> dialog, "
"you'll return to the first keyboard choice dialog and it will seem as though "
"a keyboard from that screen was chosen. You can safely ignore this anomaly "
"and continue the installation: Your keyboard is the one you chose from the "
"full list."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectKeyboard.xml:55
msgid ""
"If you choose a keyboard based on non-Latin characters, you will see an "
"extra dialog screen asking how you would prefer to switch between the Latin "
"and non-Latin keyboard layouts"
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectLanguage.xml:10
msgid "Please choose a language to use"
msgstr "Izberite jezik namestitve"

#. type: Content of: <section><para>
#: en/selectLanguage.xml:12
msgid ""
"Select your preferred language, by first expanding the list for your "
"continent. <application>Mageia</application> will use this selection during "
"the installation and for your installed system."
msgstr ""

#. type: Content of: <section><para>
#: en/selectLanguage.xml:16
msgid ""
"Select your preferred language.  <application>Mageia</application> will use "
"this selection during the installation and for your installed system."
msgstr ""

#. type: Content of: <section><para>
#: en/selectLanguage.xml:19
msgid ""
"If it is likely that you will require several languages installed on your "
"system, for yourself or other users, then you should use the "
"<guibutton>Multiple languages</guibutton> button to add them now. It will be "
"difficult to add extra language support after installation."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/selectLanguage.xml:25
msgid ""
"<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref="
"\"dx2-selectLanguage.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-language.png\" format=\"\"/> </"
"imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref="
"\"dx2-selectLanguage.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-language.png\" format=\"\"/> </"
"imageobject>"

#. type: Content of: <section><warning><para>
#: en/selectLanguage.xml:33
msgid ""
"Even if you choose more than one language, you must first choose one of them "
"as your preferred language in the first language screen. It will also be "
"marked as chosen in the multiple languages screen ."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:39
msgid ""
"If your keyboard language is not the same as your preferred language, then "
"it is advisable to install the language of your keyboard as well."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:44
msgid "Mageia uses UTF-8 (Unicode) support by default."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:45
msgid ""
"This may be disabled in the \"multiple languages\" screen if you know that "
"it is inappropriate for your language. Disabling UTF-8 applies to all "
"installed languages."
msgstr ""

#. type: Content of: <section><itemizedlist><listitem><para>
#: en/selectLanguage.xml:50
msgid ""
"You can change the language of your system after installation in the Mageia "
"Control Center -> System -> Manage localization for your system."
msgstr ""

#. type: Content of: <section><info><title>
#: en/selectMouse.xml:4
msgid "Select mouse"
msgstr "Izberite miško"

#.  Made by marja on 2012 04 11 
#.  NEEDS TO BE REVIEWED! 
#.  adding some "real" text now that we know the page shows up in the right place
#.  marja 2012-04-24 adding screenshot 
#. type: Content of: <section><mediaobject>
#: en/selectMouse.xml:16
msgid ""
"<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" "
"format=\"PNG\" > </imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" "
"format=\"PNG\" > </imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/selectMouse.xml:23
msgid ""
"If you are not happy with how your mouse responds, you can select a "
"different one here."
msgstr ""

#. type: Content of: <section><para>
#: en/selectMouse.xml:25
msgid ""
"Usually, <guilabel>Universal</guilabel> - <guilabel>Any PS/2 and USB mice</"
"guilabel> is a good choice."
msgstr ""

#. type: Content of: <section><para>
#: en/selectMouse.xml:27
msgid ""
"Select <guilabel>Universal</guilabel> - <guilabel>Force evdev</guilabel> to "
"configure the buttons that do not work on a mouse with six or more buttons."
msgstr ""

#. type: Content of: <section><info><title>
#: en/setupBootloaderAddEntry.xml:6
msgid "Add or Modify a Boot Menu Entry"
msgstr ""

#. type: Content of: <section><para>
#: en/setupBootloaderAddEntry.xml:9
msgid ""
"To do that you need to manually edit /boot/grub2/custom.cfg or use the "
"software grub-customizer instead (Available in the Mageia repositories)."
msgstr ""

#. type: Content of: <section><note><para>
#: en/setupBootloaderAddEntry.xml:13
msgid ""
"For more information, see our wiki: <link ns2:href=\"https://wiki.mageia.org/"
"en/Grub2-efi_and_Mageia\">https://wiki.mageia.org/en/Grub2-efi_and_Mageia</"
"link>"
msgstr ""

#. type: Content of: <section><info><title>
#: en/setupBootloader.xml:9
msgid "Bootloader main options"
msgstr "Glavne možnosti zagonskega nalagalnika"

#. type: Content of: <section><section><title>
#: en/setupBootloader.xml:13
msgid "Bootloader interface"
msgstr "Vmesnik zagonskega nalagalnika"

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:15
msgid "By default, Mageia uses exclusively:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:19
msgid ""
"Grub2 (with or without graphical menu) for a Legacy/MBR or Legacy/GPT system"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:24
msgid "Grub2-efi for a UEFI system."
msgstr "Grub2-efi za sistem UEFI."

#. type: Content of: <section><section><tip><para>
#: en/setupBootloader.xml:29
msgid "The Mageia graphical menus are nice :)"
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/setupBootloader.xml:33
msgid "Grub2 on Legacy/MBR and Legacy/GPT systems"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/setupBootloader.xml:36
msgid ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"setupBootloader.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata xml:id=\"setupBootloader-im1\" fileref=\"live-"
"setupBootloader.png\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"setupBootloader.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata xml:id=\"setupBootloader-im1\" fileref=\"live-"
"setupBootloader.png\"/> </imageobject>"

#. type: Content of: <section><section><section><para>
#: en/setupBootloader.xml:45 en/setupBootloader.xml:73
msgid ""
"Don't modify the \"Boot Device\" unless you really know what you are doing."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/setupBootloader.xml:50
msgid "Grub2-efi on UEFI systems"
msgstr "Grub2-efi na sistemu UEFI."

#. type: Content of: <section><section><section><para>
#: en/setupBootloader.xml:52
msgid ""
"With an UEFI system, the user interface is slightly different as you cannot "
"choose between with or without graphical menu"
msgstr ""

#. type: Content of: <section><section><section><mediaobject>
#: en/setupBootloader.xml:56
msgid ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"setupBootloader2.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-setupBootloader2.png\"/> </"
"imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"setupBootloader2.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-setupBootloader2.png\"/> </"
"imageobject>"

#. type: Content of: <section><section><section><para>
#: en/setupBootloader.xml:65
msgid ""
"If Mageia is the only system installed on your computer, the installer "
"created an ESP (EFI System Partition) to receive the bootloader (Grub2-efi). "
"If there are already UEFI operating systems installed on your computer "
"(Windows 8 for example), the Mageia installer detects the existing ESP "
"created by Windows and adds grub2-efi. Although it is possible to have "
"several ESPs, only one is advised and enough whatever the number of "
"operating systems you have."
msgstr ""

#. type: Content of: <section><section><title>
#: en/setupBootloader.xml:79
msgid "Using a Mageia bootloader"
msgstr "Uporaba Magejinega zagonskega nalagalnika"

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:81
msgid "By default, according to your system, Mageia writes a new:"
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:85
msgid ""
"GRUB2 bootloader either into the MBR (Master Boot Record) of your first hard "
"drive or in the BIOS boot partition."
msgstr ""

#. type: Content of: <section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:90
msgid "Grub2-efi bootloader into the ESP"
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:94
msgid ""
"If you already have other operating systems installed, Mageia attempts to "
"add them to your new Mageia boot menu. If you don't want this behaviour, "
"click on <guibutton>Next</guibutton> and then uncheck the box "
"<guilabel>Probe Foreign OS</guilabel>"
msgstr ""

#. type: Content of: <section><section><mediaobject>
#: en/setupBootloader.xml:100
msgid ""
"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
"\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live"
"\"> <imagedata fileref=\"live-setupBootloader3.png\" align=\"center\"/> </"
"imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
"\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live"
"\"> <imagedata fileref=\"live-setupBootloader3.png\" align=\"center\"/> </"
"imageobject>"

#. type: Content of: <section><section><title>
#: en/setupBootloader.xml:111
msgid "Using an existing bootloader"
msgstr "Uporaba obstoječega zagonskega nalagalnika"

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:113
msgid ""
"The exact procedure for adding your Mageia system to an existing bootloader "
"is beyond the scope of this help, however in most cases it will involve "
"running the relevant bootloader installation program which should detect and "
"add it automatically. See the documentation for the operating system in "
"question."
msgstr ""

#. type: Content of: <section><section><title>
#: en/setupBootloader.xml:121
msgid "Using chain loading"
msgstr ""

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:123
msgid ""
"If you don't want a bootable Mageia, but to chain load it from another OS, "
"click on <guibutton>Next</guibutton>, then on <guibutton>Advanced</"
"guibutton> and Check the box <guilabel>Do not touch ESP or MBR</guilabel>."
msgstr ""

#. type: Content of: <section><section><mediaobject>
#: en/setupBootloader.xml:129
msgid ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"setupBootloader4.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-setupBootloader4.png\" align="
"\"center\"/> </imageobject>"
msgstr ""
"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
"setupBootloader4.png\" align=\"center\"/> </imageobject> <imageobject "
"condition=\"live\"> <imagedata fileref=\"live-setupBootloader4.png\" align="
"\"center\"/> </imageobject>"

#. type: Content of: <section><section><para>
#: en/setupBootloader.xml:138
msgid ""
"You will get a warning that the bootloader is missing, ignore it by clicking "
"<guibutton>OK</guibutton>."
msgstr ""

#. type: Content of: <section><section><mediaobject>
#: en/setupBootloader.xml:142
msgid ""
"<imageobject> <imagedata fileref=\"live-setupBootloader5.png\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"live-setupBootloader5.png\"/> </"
"imageobject>"

#. type: Content of: <section><section><title>
#: en/setupBootloader.xml:149
msgid "Options"
msgstr "Možnosti"

#. type: Content of: <section><section><section><title>
#: en/setupBootloader.xml:152
msgid "First page"
msgstr "Prva stran"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/setupBootloader.xml:156
msgid ""
"<guilabel>Delay before booting the default image</guilabel>: This text box "
"lets you set a delay in seconds before the default operating system is "
"started up."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/setupBootloader.xml:162
msgid ""
"<guilabel>Security</guilabel>: This allows you to set a password for the "
"bootloader. This means a username and password will be asked at the boot "
"time to select a booting entry or change settings. The username is \"root\" "
"and the password is the one chosen here after."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/setupBootloader.xml:170
msgid ""
"<guilabel>Password</guilabel>: This text box is where you actually put the "
"password"
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
#: en/setupBootloader.xml:175
msgid ""
"<guilabel>Password (again)</guilabel>: Retype the password and Drakx will "
"check that it matches with the one set above."
msgstr ""
"<guilabel>Geslo (ponovno)</guilabel>: Program Drakx preverja pravilnost "
"vnosa, zato morate vnos gesla ponoviti."

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:181 en/setupBootloader.xml:239
msgid "<guilabel>Advanced</guilabel>"
msgstr "<guilabel>Napredno</guilabel>"

#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/setupBootloader.xml:185
msgid ""
"<guilabel>Enable ACPI:</guilabel> ACPI (Advanced Configuration and Power "
"Interface) is a standard for the power management. It can save energy by "
"stopping unused devices, this was the method used before APM. Unchecking it "
"could be useful if, for example, your computer does not support ACPI or if "
"you think the ACPI implementation might cause some problems (for instance "
"random reboots or system lockups)."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/setupBootloader.xml:195
msgid ""
"<guilabel>Enable SMP</guilabel>: This option enables / disables symmetric "
"multiprocessing for multi core processors."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/setupBootloader.xml:201
msgid ""
"<guilabel>Enable APIC</guilabel>: Enabling or disabling this gives the "
"operating system access to the Advanced Programmable Interrupt Controller. "
"APIC devices permit more complex priority models, and Advanced IRQ "
"(Interrupt Request)  management."
msgstr ""

#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
#: en/setupBootloader.xml:209
msgid ""
"<guilabel>Enable Local APIC</guilabel>: Here you can set local APIC, which "
"manages all external interrupts for a specific processor in an SMP system."
msgstr ""

#. type: Content of: <section><section><section><title>
#: en/setupBootloader.xml:219
msgid "Next page"
msgstr "Naslednja stran"

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:223
msgid "<guilabel>Default:</guilabel> Operating system started up by default"
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:228
msgid ""
"<guilabel>Append:</guilabel> This option lets you pass the kernel "
"information or tell the kernel to give you more information as it boots."
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/setupBootloader.xml:234
msgid ""
"<guilabel>Probe foreign OS</guilabel>: see above <link linkend="
"\"setupMageiaBootloader\">Using a Mageia bootloader</link>"
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para><itemizedlist><listitem><para>
#: en/setupBootloader.xml:241
msgid ""
"<guilabel>Video mode:</guilabel> This sets the screen size and colour depth "
"the boot menu will use. If you click the down triangle you will be offered "
"other size and colour depth options."
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para><itemizedlist><listitem><para>
#: en/setupBootloader.xml:248
msgid ""
"<emphasis role=\"bold\">Do not touch ESP or MBR</emphasis>: see above <link "
"linkend=\"setupChainLoading\">Using the chain loading</link>"
msgstr ""

#. type: Content of: <section><info><title>
#: en/setupSCSI.xml:11
msgid "Setup SCSI"
msgstr "Nastavitev naprav SCSI"

#.  Made by marja on 2012 04 02 
#.  NEEDS TO BE REVIEWED! 
#.  JohnR - edited 2012-03-03 
#.  SimonNZG has reviewed 2012-04-03 (changed editted to edited in JohnR's comment ;-) 
#.  barjac has re-reviewed and made some minor tweaks. Revisions incremented. 
#.  marja 2012-04-24 added screenshot 
#.  marja 2012-04-25 replacing John's version 1.6 because that one was based on the
#.        Mdv doc instead of on our setupSCSI file 
#. type: Content of: <section><mediaobject>
#: en/setupSCSI.xml:26
msgid ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" format="
"\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> </imageobject>"
msgstr ""
"<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" format="
"\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> </imageobject>"

#. type: Content of: <section><para>
#: en/setupSCSI.xml:32
msgid ""
"DrakX usually detects hard disks correctly. With some older SCSI controllers "
"it may be unable to determine the correct drivers to use and subsequently "
"fail to recognise the drive."
msgstr ""

#. type: Content of: <section><para>
#: en/setupSCSI.xml:36
msgid ""
"If this happens, you will need to manually tell Drakx which SCSI drive(s) "
"you have."
msgstr ""

#. type: Content of: <section><para>
#: en/setupSCSI.xml:39
msgid "DrakX should then be able to configure the drive(s) correctly."
msgstr ""

#. type: Content of: <section><info><title>
#: en/soundConfig.xml:3
msgid "Sound Configuration"
msgstr "Nastavitve zvoka"

#.  Lebarhon 20170209 updated SC
#. type: Content of: <section><mediaobject>
#: en/soundConfig.xml:9
msgid ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-soundConfig.png\" xml:"
"id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-soundConfig.png\" xml:"
"id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/soundConfig.xml:14
msgid ""
"In this screen the name of the driver that the installer chose for your "
"sound card is given, which will be the default driver if we have a default "
"one."
msgstr ""

#. type: Content of: <section><para>
#: en/soundConfig.xml:18
msgid ""
"The default driver should work without problems. However, if after install "
"you do encounter problems, then run <command>draksound</command> or start "
"this tool via MCC (Mageia Control Center), by choosing the "
"<guilabel>Hardware</guilabel> tab and clicking on <guilabel>Sound "
"Configuration</guilabel> at the top right of the screen."
msgstr ""

#. type: Content of: <section><para>
#: en/soundConfig.xml:24
msgid ""
"Then, in the draksound or \"Sound Configuration\" tool screen, click on "
"<guibutton>Advanced</guibutton> and then on <guibutton>Troubleshooting</"
"guibutton> to find very useful advice about how to solve the problem."
msgstr ""

#. type: Content of: <section><section><info><title>
#: en/soundConfig.xml:31
msgid "Advanced"
msgstr "Napredno"

#. type: Content of: <section><section><para>
#: en/soundConfig.xml:34
msgid ""
"Clicking <guibutton>Advanced</guibutton> in this screen, during install, is "
"useful if there is no default driver and there are several drivers "
"available, but you think the installer selected the wrong one."
msgstr ""

#. type: Content of: <section><section><para>
#: en/soundConfig.xml:39
msgid ""
"In that case you can select a different driver after clicking on "
"<guibutton>Let me pick any driver</guibutton>."
msgstr ""

#. type: Content of: <section><info><title>
#: en/takeOverHdConfirm.xml:4
msgid "Confirm hard disk to be formatted"
msgstr "Potrdi formatiranje trdega diska"

#.  Made by marja on 2012 04 03 
#.  test comment - johnr 
#.  2012-04-24 marja - replaced "if you are not sure you selected the correct
#.     hard disk." with "if you are not sure about your choice", because I'm sure I
#.     saw this help screen when I had only one HD 
#.  2013-05-05 marja added screenshot 
#. type: Content of: <section><mediaobject>
#: en/takeOverHdConfirm.xml:19
msgid ""
"<imageobject condition='live'> <imagedata fileref=\"live-takeOverHdConfirm."
"png\" format=\"PNG\" align=\"center\" ></imagedata> </imageobject> "
"<imageobject condition='classical'> <imagedata fileref=\"dx2-"
"takeOverHdConfirm.png\" format=\"PNG\" align=\"center\" ></imagedata> </"
"imageobject>"
msgstr ""
"<imageobject condition='live'> <imagedata fileref=\"live-takeOverHdConfirm."
"png\" format=\"PNG\" align=\"center\" ></imagedata> </imageobject> "
"<imageobject condition='classical'> <imagedata fileref=\"dx2-"
"takeOverHdConfirm.png\" format=\"PNG\" align=\"center\" ></imagedata> </"
"imageobject>"

#. type: Content of: <section><para>
#: en/takeOverHdConfirm.xml:27
msgid ""
"Click on <guibutton>Previous</guibutton> if you are not sure about your "
"choice."
msgstr ""

#. type: Content of: <section><para>
#: en/takeOverHdConfirm.xml:30
msgid ""
"Click on <guibutton>Next</guibutton> if you are sure and want to erase every "
"partition, every operating system and all data on that hard disk."
msgstr ""

#. type: Content of: <section><info><title>
#: en/testing.xml:9
msgid "Testing Mageia as Live system"
msgstr "Preizkusite Magejo kot živ sistem"

#. type: Content of: <section><section><info><title>
#: en/testing.xml:14
msgid "Live mode"
msgstr "Živi način"

#. type: Content of: <section><section><mediaobject>
#: en/testing.xml:18
msgid "<imageobject> <imagedata fileref=\"live-liveMode.png\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"live-liveMode.png\"/> </imageobject>"

#. type: Content of: <section><section><para>
#: en/testing.xml:23
msgid ""
"You get this screen if you selected \"Boot Mageia\". If not, you get the "
"\"<link linkend=\"doPartitionDisks\">Partitioning</link> step\""
msgstr ""

#. type: Content of: <section><section><section><info><title>
#: en/testing.xml:28
msgid "Testing hardware"
msgstr "Preizkus strojne opreme"

#. type: Content of: <section><section><section><para>
#: en/testing.xml:31
msgid ""
"One of the Live mode goals is to test if the hardware is correctly managed "
"by Mageia. You can check if all devices have a driver in the Hardware "
"section of the Mageia Control Center. You can test the most current devices:"
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/testing.xml:38
msgid "network interface: configure it with net_applet"
msgstr "omrežni vmesnik: nastavite ga z net_applet"

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/testing.xml:42
msgid "graphical card: if you see the previous screen, it's already OK."
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/testing.xml:47
msgid "webcam:"
msgstr "Spletna kamera:"

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/testing.xml:51
msgid "sound: a jingle has already been played"
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/testing.xml:55
msgid "printer: configure it and print a test page"
msgstr ""

#. type: Content of: <section><section><section><itemizedlist><listitem><para>
#: en/testing.xml:59
msgid "scanner: scan a document from ..."
msgstr ""

#. type: Content of: <section><section><section><para>
#: en/testing.xml:63
msgid ""
"If all is OK for you, you can process to the installation. If not, you can "
"leave with the quit button."
msgstr ""

#. type: Content of: <section><section><section><remark>
#: en/testing.xml:66
msgid "The configuration settings you made here are kept for the installation."
msgstr ""

#. type: Content of: <section><section><section><info><title>
#: en/testing.xml:72
msgid "Launch installation"
msgstr "Zagon namestitve"

#. type: Content of: <section><section><section><mediaobject>
#: en/testing.xml:76
msgid ""
"<imageobject> <imagedata fileref=\"live-liveMode-install.png\"/> </"
"imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"live-liveMode-install.png\"/> </"
"imageobject>"

#. type: Content of: <section><section><section><para>
#: en/testing.xml:81
msgid ""
"To launch the installation of Mageia LiveCD or Live DVD to the hard disc or "
"SSD drive, simply click on the icon \"Install on Hard Disk\". You will get "
"this screen, and then the \"<link linkend=\"doPartitionDisks\">Partitioning</"
"link> step\" as for the direct installation."
msgstr ""

#. type: Content of: <section><info><title>
#: en/uninstall-Mageia.xml:3
msgid "Uninstalling Mageia"
msgstr "Odstrani Magejo"

#. type: Content of: <section><section><title>
#: en/uninstall-Mageia.xml:10
msgid "Howto"
msgstr "Navodila"

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:12
msgid ""
"If Mageia didn't convince you or you can't install it correctly, in short "
"you want get rid of it. That is your right and Mageia also gives you the "
"possibility to uninstall. This is not true for every operating system."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:17
msgid ""
"After your data backup, reboot your installation Mageia DVD and select "
"Rescue system, then, Restore Windows boot loader. At the next boot, you will "
"only have Windows with no option to choose your operating system."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:22
msgid ""
"To recover the space used by Mageia partitions on Windows, click on "
"<code>Start -> Control Panel -> Administrative Tools -> Computer Management -"
"> Storage -> Disk Management</code> to access to the partition management. "
"You will recognize the Mageia partition because they are labeled "
"<guilabel>Unknown</guilabel>, and also by their size and place in the disk. "
"Right click on each of these partitions and select <guibutton>Delete</"
"guibutton>. The space will be freed."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:30
msgid ""
"If you are using Windows XP, you can create a new partition and format it "
"(FAT32 or NTFS). It will get a partition letter."
msgstr ""

#. type: Content of: <section><section><para>
#: en/uninstall-Mageia.xml:33
msgid ""
"If you have Vista or 7, you have one more possibility, you can extend the "
"existing partition that is at the left of the freed space.  There are other "
"partitioning tools that can be used, such as gparted, available for both "
"windows and linux. As always, when changing partitions, be very careful, and "
"make sure all important things have been backed up."
msgstr ""

#. type: Content of: <section><info><title>
#: en/unused.xml:9
msgid "Keep or delete unused material"
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/unused.xml:13
msgid ""
"<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format="
"\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>"
msgstr ""
"<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format="
"\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>"

#. type: Content of: <section><para>
#: en/unused.xml:19
msgid ""
"In this step, the installer looks for unused locales packages and unused "
"hardware packages. Then it proposes you to delete them. It is a good idea to "
"accept, except if you prepare an installation which has to run on different "
"hardware."
msgstr ""

#. type: Content of: <section><mediaobject>
#: en/unused.xml:25
msgid ""
"<imageobject> <imagedata fileref=\"../live-unused-InstallationProgress.png\"/"
"> </imageobject>"
msgstr ""
"<imageobject> <imagedata fileref=\"../live-unused-InstallationProgress.png\"/"
"> </imageobject>"

#. type: Content of: <section><para>
#: en/unused.xml:30
msgid ""
"The next step is the copying of files on hard disk. This takes some minutes. "
"At the end, you get a blank screen for some time, it's normal."
msgstr ""